March 2025 - Linux-kselftest-mirror

[PATCH v3 0/2] tools: Unify top-level quiet infrastructure

by Charlie Jenkins

The quiet infrastructure was moved out of Makefile.build to accomidate the new syscall table generation scripts in perf. Syscall table generation wanted to also be able to be quiet, so instead of again copying the code to set the quiet variables, the code was moved into Makefile.perf to be used globally. This was not the right solution. It should have been moved even further upwards in the call chain. Makefile.include is imported in many files so this seems like a proper place to put it. To: Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> --- Changes in v3: - Add back erroneously removed "silent=1" (Jiri) - Link to v2: https://lore.kernel.org/r/20250210-quiet_tools-v2-0-b2f18cbf72af@rivosinc.c… Changes in v2: - Fix spacing around Q= (Andrii) - Link to v1: https://lore.kernel.org/r/20250203-quiet_tools-v1-0-d25c8956e59a@rivosinc.c… --- Charlie Jenkins (2): tools: Unify top-level quiet infrastructure tools: Remove redundant quiet setup tools/arch/arm64/tools/Makefile | 6 ----- tools/bpf/Makefile | 6 ----- tools/bpf/bpftool/Documentation/Makefile | 6 ----- tools/bpf/bpftool/Makefile | 6 ----- tools/bpf/resolve_btfids/Makefile | 2 -- tools/bpf/runqslower/Makefile | 5 +--- tools/build/Makefile | 8 +----- tools/lib/bpf/Makefile | 13 ---------- tools/lib/perf/Makefile | 13 ---------- tools/lib/thermal/Makefile | 13 ---------- tools/objtool/Makefile | 6 ----- tools/perf/Makefile.perf | 41 ------------------------------- tools/scripts/Makefile.include | 30 ++++++++++++++++++++++ tools/testing/selftests/bpf/Makefile.docs | 6 ----- tools/testing/selftests/hid/Makefile | 2 -- tools/thermal/lib/Makefile | 13 ---------- tools/tracing/latency/Makefile | 6 ----- tools/tracing/rtla/Makefile | 6 ----- tools/verification/rv/Makefile | 6 ----- 19 files changed, 32 insertions(+), 162 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250203-quiet_tools-9a6ea9d65a19 -- - Charlie

1 day, 21 hours

3
4
0 0

[PATCH net-next v2 0/8] netconsole: Add taskname sysdata support

by Breno Leitao

This patchset introduces a new feature to the netconsole extradata subsystem that enables the inclusion of the current task's name in the sysdata output of netconsole messages. This enhancement is particularly valuable for large-scale deployments, such as Meta's, where netconsole collects messages from millions of servers and stores them in a data warehouse for analysis. Engineers often rely on these messages to investigate issues and assess kernel health. One common challenge we face is determining the context in which a particular message was generated. By including the task name (task->comm) with each message, this feature provides a direct answer to the frequently asked question: "What was running when this message was generated?" This added context will significantly improve our ability to diagnose and troubleshoot issues, making it easier to interpret output of netconsole. The patchset consists of seven patches that implement the following changes: * Refactor CPU number formatting into a separate function * Prefix CPU_NR sysdata feature with SYSDATA_ * Patch to covert a bitwise operation into boolean * Add configfs controls for taskname sysdata feature * Add taskname to extradata entry count * Add support for including task name in netconsole's extra data output * Document the task name feature in Documentation/networking/netconsole.rst * Add test coverage for the task name feature to the existing sysdata selftest script These changes allow users to enable or disable the task name feature via configfs and provide additional context for kernel messages by showing which task generated each console message. I have tested these patches on some servers and they seem to work as expected. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v2: - Add an extra patch to convert the comparison more stable. (Paolo) - Changed the argument of a function (Simon) - Removed the warn on `current == NULLL` since it shouldn't be the case. (Simon and Paolo) - Link to v1: https://lore.kernel.org/r/20250221-netcons_current-v1-0-21c86ae8fc0d@debian… --- Breno Leitao (8): netconsole: prefix CPU_NR sysdata feature with SYSDATA_ netconsole: Make boolean comparison consistent netconsole: refactor CPU number formatting into separate function netconsole: add taskname to extradata entry count netconsole: add configfs controls for taskname sysdata feature netconsole: add task name to extra data fields netconsole: docs: document the task name feature netconsole: selftest: add task name append testing Documentation/networking/netconsole.rst | 28 +++++++ drivers/net/netconsole.c | 95 ++++++++++++++++++---- .../selftests/drivers/net/netcons_sysdata.sh | 51 ++++++++++-- 3 files changed, 153 insertions(+), 21 deletions(-) --- base-commit: 56794b5862c5a9aefcf2b703257c6fb93f76573e change-id: 20250217-netcons_current-2c635fa5beda prerequisite-change-id: 20250212-netdevsim-258d2d628175:v3 prerequisite-patch-id: 4ecfdbc58dd599d2358655e4ad742cbb9dde39f3 Best regards, -- Breno Leitao <leitao(a)debian.org>

1 day, 23 hours

3
11
0 0

[PATCH net-next 0/7] netconsole: Add taskname sysdata support

by Breno Leitao

This patchset introduces a new feature to the netconsole extradata subsystem that enables the inclusion of the current task's name in the sysdata output of netconsole messages. This enhancement is particularly valuable for large-scale deployments, such as Meta's, where netconsole collects messages from millions of servers and stores them in a data warehouse for analysis. Engineers often rely on these messages to investigate issues and assess kernel health. One common challenge we face is determining the context in which a particular message was generated. By including the task name (task->comm) with each message, this feature provides a direct answer to the frequently asked question: "What was running when this message was generated?" This added context will significantly improve our ability to diagnose and troubleshoot issues, making it easier to interpret output of netconsole. The patchset consists of seven patches that implement the following changes: * Refactor CPU number formatting into a separate function * Prefix CPU_NR sysdata feature with SYSDATA_ * Add configfs controls for taskname sysdata feature * Add taskname to extradata entry count * Add support for including task name in netconsole's extra data output * Document the task name feature in Documentation/networking/netconsole.rst * Add test coverage for the task name feature to the existing sysdata selftest script These changes allow users to enable or disable the task name feature via configfs and provide additional context for kernel messages by showing which task generated each console message. I have tested these patches on some servers and they seem to work as expected. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Breno Leitao (7): netconsole: prefix CPU_NR sysdata feature with SYSDATA_ netconsole: refactor CPU number formatting into separate function netconsole: add taskname to extradata entry count netconsole: add configfs controls for taskname sysdata feature netconsole: add task name to extra data fields netconsole: docs: document the task name feature netconsole: selftest: add task name append testing Documentation/networking/netconsole.rst | 28 +++++++ drivers/net/netconsole.c | 98 ++++++++++++++++++---- .../selftests/drivers/net/netcons_sysdata.sh | 51 +++++++++-- 3 files changed, 156 insertions(+), 21 deletions(-) --- base-commit: bb3bb6c92e5719c0f5d7adb9d34db7e76705ac33 change-id: 20250217-netcons_current-2c635fa5beda prerequisite-change-id: 20250212-netdevsim-258d2d628175:v3 prerequisite-patch-id: 4ecfdbc58dd599d2358655e4ad742cbb9dde39f3 Best regards, -- Breno Leitao <leitao(a)debian.org>

1 day, 23 hours

3
23
0 0

selftests: cgroup: Failures – Timeouts & OOM Issues Analysis

by Naresh Kamboju

As part of LKFT’s re-validation of known issues, we have observed that the selftests: cgroup suite is consistently failing across almost all LKFT-supported devices due to: - Test timeouts (45 seconds limit reached) - OOM-killer invocation ## Key Questions for Discussion: - Would it be beneficial to increase the test timeout to ~180 seconds to allow sufficient execution time? - Should we enhance logging to explicitly print failure reasons when a test fails? - Are there any missing dependencies that could be causing these failures? Note: The required selftests/cgroup/config options were included in LKFT's build and test plans. ## Devices Affected: The following DUTs consistently experience these failures: - dragonboard-410c (arm64) - dragonboard-845c (arm64) - e850-96 (arm64) - juno-r2 (arm64) - qemu-arm64 (arm64) - qemu-armv7 - qemu-x86_64 - rk3399-rock-pi-4b (arm64) - x15 (arm) - x86_64 Regression Analysis: - New regression? No (these failures have been observed for months/years). - Reproducibility? Yes, the failures occur consistently. - Test suite affected? selftests: cgroup (timeouts and OOM-related failures). Test regression: selftests cgroup fails timeout and oom-killer Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test log: # selftests: cgroup: test_cpu # ok 1 test_cpucg_subtree_control # ok 2 test_cpucg_stats # ok 3 test_cpucg_nice # not ok 4 test_cpucg_weight_overprovisioned # ok 5 test_cpucg_weight_underprovisioned # ok 6 test_cpucg_nested_weight_overprovisioned # ok 7 test_cpucg_nested_weight_underprovisioned # not ok 2 selftests: cgroup: test_cpu # TIMEOUT 45 seconds <trim> # selftests: cgroup: test_freezer # ok 1 test_cgfreezer_simple # ok 2 test_cgfreezer_tree # ok 3 test_cgfreezer_forkbomb # ok 4 test_cgfreezer_mkdir # ok 5 test_cgfreezer_rmdir # ok 6 test_cgfreezer_migrate # Cgroup /sys/fs/cgroup/cg_test_ptrace isn't frozen # not ok 7 test_cgfreezer_ptrace # ok 8 test_cgfreezer_stopped # ok 9 test_cgfreezer_ptraced # ok 10 test_cgfreezer_vfork not ok 4 selftests: cgroup: test_freezer # exit=1 <trim> selftests: cgroup: test_kmem # not ok 7 selftests: cgroup: test_kmem # TIMEOUT 45 seconds <trim> # selftests: cgroup: test_memcontrol # ok 1 test_memcg_subtree_control # not ok 2 test_memcg_current_peak # not ok 3 test_memcg_min # not ok 4 test_memcg_low # not ok 5 test_memcg_high # ok 6 test_memcg_high_sync [ 270.699078] test_memcontrol invoked oom-killer: gfp_mask=0xcc0(GFP_KERNEL), order=0, oom_score_adj=0 [ 270.699921] CPU: 1 UID: 0 PID: 946 Comm: test_memcontrol Not tainted 6.14.0-rc5-next-20250303 #1 [ 270.699930] Hardware name: Radxa ROCK Pi 4B (DT) <trim> [ 270.729527] Memory cgroup out of memory: Killed process 946 (test_memcontrol) total-vm:104840kB, anon-rss:30596kB, file-rss:1056kB, shmem-rss:0kB, UID:0 pgtables:104kB oom_score_adj:0 # not ok 7 test_memcg_max # not ok 8 test_memcg_reclaim <trim> not ok 8 selftests: cgroup: test_memcontrol # exit=1 ## Source * Kernel version: 6.14.0-rc5-next-20250303 * Git tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git * Git sha: cd3215bbcb9d4321def93fea6cfad4d5b42b9d1d * Git describe: 6.14.0-rc5-next-20250303 * Project details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250303/ ## Test data * Test log: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250303/te… * Test history: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250303/te… * Test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20250303/te… * Test logs rock pi: https://lkft.validation.linaro.org/scheduler/job/8148789#L1774 * Test logs x86: https://lkft.validation.linaro.org/scheduler/job/8148731#L1948 -- Linaro LKFT https://lkft.linaro.org

1 day, 23 hours

2
1
0 0

[PATCHv3 net 0/3] bond: fix xfrm offload issues

by Hangbin Liu

The first patch fixes the incorrect locks using in bond driver. The second patch fixes the xfrm offload feature during setup active-backup mode. The third patch add a ipsec offload testing. v3: move the ipsec deletion to bond_ipsec_free_sa (Cosmin Ratiu) v2: do not turn carrier on if bond change link failed (Nikolay Aleksandrov) move the mutex lock to a work queue (Cosmin Ratiu) Hangbin Liu (3): bonding: move IPsec deletion to bond_ipsec_free_sa bonding: fix xfrm offload feature setup on active-backup mode selftests: bonding: add ipsec offload test drivers/net/bonding/bond_main.c | 36 ++-- drivers/net/bonding/bond_netlink.c | 16 +- include/net/bonding.h | 1 + .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_ipsec_offload.sh | 155 ++++++++++++++++++ .../selftests/drivers/net/bonding/config | 4 + 6 files changed, 195 insertions(+), 20 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_ipsec_offload.sh -- 2.46.0

2 days, 3 hours

4
15
0 0

[PATCH net-next v8 0/8] Some pktgen fixes/improvments (part II)

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (now already applied to net-next) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() nd part II (this one): - net: pktgen: use defines for the various dec/hex number parsing digits lengths - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen Regards, Peter Changes v7 -> v8: - rebased on actual net-next/main - add rev-by Simon Horman - net: pktgen: fix mpls maximum labels list parsing - slightly rephrase commit message, omit '/16' (suggested by Paolo Abeni) - net: pktgen: fix mpls reset parsing - fix c99 comment (suggested by Paolo Abeni) - selftest: net: add proc_net_pktgen - fix c99 comments (suggested by Paolo Abeni) Changes v6 -> v7: - rebased on actual net-next/main - selftest: net: add proc_net_pktgen - fixed conflict in tools/testing/selftests/net/config Changes v5 -> v6: - add rev-by Simon Horman - drop patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' - adjust to dropped patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' - net: pktgen: fix mix of int/long - fix line break (suggested by Simon Horman) Changes v4 -> v5: - split up patchset into part i/ii (suggested by Simon Horman) - add rev-by Simon Horman - net: pktgen: align some variable declarations to the most common pattern -> net: pktgen: fix mix of int/long - instead of align to most common pattern (int) adjust all usages to size_t for i and max and ssize_t for len and adjust function signatures of hex32_arg(), count_trail_chars(), num_arg() and strn_len() accordingly - respect reverse xmas tree order for local variable declarations (where possible without too much code churn) - update subject line and patch description - dropped net: pktgen: hex32_arg/num_arg error out in case no characters are available - keep empty hex/num arg is implicit assumed as zero value - dropped net: pktgen: num_arg error out in case no valid character is parsed - keep empty hex/num arg is implicit assumed as zero value - Change patch description ('Fixes:' -> 'Addresses the following:', suggested by Simon Horman) - net: pktgen: remove all superfluous index assignements - new patch (suggested by Simon Horman) - selftest: net: add proc_net_pktgen - addapt to dropped patch 'net: pktgen: hex32_arg/num_arg error out in case no characters are available', empty hex/num arg is now implicit assumed as zero value (instead of failure) Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (8): net: pktgen: fix mix of int/long net: pktgen: remove extra tmp variable (re-use len instead) net: pktgen: remove some superfluous variable initializing net: pktgen: fix mpls maximum labels list parsing net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing net: pktgen: remove all superfluous index assignements selftest: net: add proc_net_pktgen net/core/pktgen.c | 288 ++++---- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 646 ++++++++++++++++++ 4 files changed, 805 insertions(+), 131 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

2 days, 3 hours

2
9
0 0

[PATCH] selftests/bpf: Move test_lwt_ip_encap to test_progs

by Bastien Curutchet (eBPF Foundation)

test_lwt_ip_encap.sh isn't used by the BPF CI. Add a new file in the test_progs framework to migrate the tests done by test_lwt_ip_encap.sh. It uses the same network topology and the same BPF programs located in progs/test_lwt_ip_encap.c. Rework the GSO part to avoid using nc and dd. Remove test_lwt_ip_encap.sh and its Makefile entry. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/lwt_ip_encap.c | 540 +++++++++++++++++++++ tools/testing/selftests/bpf/test_lwt_ip_encap.sh | 476 ------------------ 3 files changed, 541 insertions(+), 478 deletions(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index e6a02d5b87d123cef7e6b41bfbc96d34083f38e1..df4814b5200a5a0e732b19ab3a5975957fb7cbc9 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -95,7 +95,7 @@ TEST_GEN_PROGS += test_progs-cpuv4 TEST_INST_SUBDIRS += cpuv4 endif -TEST_GEN_FILES = test_lwt_ip_encap.bpf.o test_tc_edt.bpf.o +TEST_GEN_FILES = test_tc_edt.bpf.o TEST_FILES = xsk_prereqs.sh $(wildcard progs/btf_dump_test_case_*.c) # Order correspond to 'make run_tests' order @@ -104,7 +104,6 @@ TEST_PROGS := test_kmod.sh \ test_lirc_mode2.sh \ test_xdp_vlan_mode_generic.sh \ test_xdp_vlan_mode_native.sh \ - test_lwt_ip_encap.sh \ test_tc_tunnel.sh \ test_tc_edt.sh \ test_xdping.sh \ diff --git a/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c new file mode 100644 index 0000000000000000000000000000000000000000..61fcded43b46cab7775237c6d85de07b5df7d87e --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/lwt_ip_encap.c @@ -0,0 +1,540 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <netinet/in.h> + +#include "network_helpers.h" +#include "test_progs.h" + +#define BPF_FILE "test_lwt_ip_encap.bpf.o" + +#define NETNS_NAME_SIZE 32 +#define NETNS_BASE "ns-lwt-ip-encap" + +#define IP4_ADDR_1 "172.16.1.100" +#define IP4_ADDR_2 "172.16.2.100" +#define IP4_ADDR_3 "172.16.3.100" +#define IP4_ADDR_4 "172.16.4.100" +#define IP4_ADDR_5 "172.16.5.100" +#define IP4_ADDR_6 "172.16.6.100" +#define IP4_ADDR_7 "172.16.7.100" +#define IP4_ADDR_8 "172.16.8.100" +#define IP4_ADDR_GRE "172.16.16.100" + +#define IP4_ADDR_SRC IP4_ADDR_1 +#define IP4_ADDR_DST IP4_ADDR_4 + +#define IP6_ADDR_1 "fb01::1" +#define IP6_ADDR_2 "fb02::1" +#define IP6_ADDR_3 "fb03::1" +#define IP6_ADDR_4 "fb04::1" +#define IP6_ADDR_5 "fb05::1" +#define IP6_ADDR_6 "fb06::1" +#define IP6_ADDR_7 "fb07::1" +#define IP6_ADDR_8 "fb08::1" +#define IP6_ADDR_GRE "fb10::1" + +#define IP6_ADDR_SRC IP6_ADDR_1 +#define IP6_ADDR_DST IP6_ADDR_4 + +/* Setup/topology: + * + * NS1 NS2 NS3 + * veth1 <---> veth2 veth3 <---> veth4 (the top route) + * veth5 <---> veth6 veth7 <---> veth8 (the bottom route) + * + * Each vethN gets IP[4|6]_ADDR_N address. + * + * IP*_ADDR_SRC = IP*_ADDR_1 + * IP*_ADDR_DST = IP*_ADDR_4 + * + * All tests test pings from IP*_ADDR__SRC to IP*_ADDR_DST. + * + * By default, routes are configured to allow packets to go + * IP*_ADDR_1 <=> IP*_ADDR_2 <=> IP*_ADDR_3 <=> IP*_ADDR_4 (the top route). + * + * A GRE device is installed in NS3 with IP*_ADDR_GRE, and + * NS1/NS2 are configured to route packets to IP*_ADDR_GRE via IP*_ADDR_8 + * (the bottom route). + * + * Tests: + * + * 1. Routes NS2->IP*_ADDR_DST are brought down, so the only way a ping + * from IP*_ADDR_SRC to IP*_ADDR_DST can work is via IP*_ADDR_GRE. + * + * 2a. In an egress test, a bpf LWT_XMIT program is installed on veth1 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth1:egress]->GRE:decap->DST + * ping replies go DST->SRC directly + * + * 2b. In an ingress test, a bpf LWT_IN program is installed on veth2 + * that encaps the packets with an IP/GRE header to route to IP*_ADDR_GRE. + * + * ping: SRC->[encap at veth2:ingress]->GRE:decap->DST + * ping replies go DST->SRC directly + */ + +static int create_ns(char *name, size_t name_sz) +{ + if (!name) + goto fail; + + if (!ASSERT_OK(append_tid(name, name_sz), "append TID")) + goto fail; + + SYS(fail, "ip netns add %s", name); + + /* rp_filter gets confused by what these tests are doing, so disable it */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.all.rp_filter=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.conf.default.rp_filter=0", name); + /* Disable IPv6 DAD because it sometimes takes too long and fails tests */ + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.accept_dad=0", name); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.default.accept_dad=0", name); + + return 0; +fail: + return -1; +} + +static int set_top_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth1", ns1, IP4_ADDR_1); + SYS(fail, "ip -n %s a add %s/24 dev veth2", ns2, IP4_ADDR_2); + SYS(fail, "ip -n %s a add %s/24 dev veth3", ns2, IP4_ADDR_3); + SYS(fail, "ip -n %s a add %s/24 dev veth4", ns3, IP4_ADDR_4); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth1", ns1, IP6_ADDR_1); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth2", ns2, IP6_ADDR_2); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth3", ns2, IP6_ADDR_3); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth4", ns3, IP6_ADDR_4); + + SYS(fail, "ip -n %s link set dev veth1 up", ns1); + SYS(fail, "ip -n %s link set dev veth2 up", ns2); + SYS(fail, "ip -n %s link set dev veth3 up", ns2); + SYS(fail, "ip -n %s link set dev veth4 up", ns3); + + return 0; +fail: + return 1; +} + +static int set_bottom_addr(const char *ns1, const char *ns2, const char *ns3) +{ + SYS(fail, "ip -n %s a add %s/24 dev veth5", ns1, IP4_ADDR_5); + SYS(fail, "ip -n %s a add %s/24 dev veth6", ns2, IP4_ADDR_6); + SYS(fail, "ip -n %s a add %s/24 dev veth7", ns2, IP4_ADDR_7); + SYS(fail, "ip -n %s a add %s/24 dev veth8", ns3, IP4_ADDR_8); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth5", ns1, IP6_ADDR_5); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth6", ns2, IP6_ADDR_6); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth7", ns2, IP6_ADDR_7); + SYS(fail, "ip -n %s -6 a add %s/128 dev veth8", ns3, IP6_ADDR_8); + + SYS(fail, "ip -n %s link set dev veth5 up", ns1); + SYS(fail, "ip -n %s link set dev veth6 up", ns2); + SYS(fail, "ip -n %s link set dev veth7 up", ns2); + SYS(fail, "ip -n %s link set dev veth8 up", ns3); + + return 0; +fail: + return 1; +} + +static int configure_vrf(const char *ns1, const char *ns2) +{ + if (!ns1 || !ns2) + goto fail; + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns1); + SYS(fail, "ip -n %s link set red up", ns1); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns1); + SYS(fail, "ip -n %s link set veth1 vrf red", ns1); + SYS(fail, "ip -n %s link set veth5 vrf red", ns1); + + SYS(fail, "ip -n %s link add red type vrf table 1001", ns2); + SYS(fail, "ip -n %s link set red up", ns2); + SYS(fail, "ip -n %s route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s -6 route add table 1001 unreachable default metric 8192", ns2); + SYS(fail, "ip -n %s link set veth2 vrf red", ns2); + SYS(fail, "ip -n %s link set veth3 vrf red", ns2); + SYS(fail, "ip -n %s link set veth6 vrf red", ns2); + SYS(fail, "ip -n %s link set veth7 vrf red", ns2); + + return 0; +fail: + return -1; +} + +static int configure_ns1(const char *ns1, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns1 || !vrf) + goto fail; + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth1 %s", IP4_ADDR_2, vrf); + SYS(fail, "ip route add default dev veth1 via %s %s", IP4_ADDR_2, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth1 %s", IP6_ADDR_2, vrf); + SYS(fail, "ip -6 route add default dev veth1 via %s %s", IP6_ADDR_2, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth5 %s", IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_7, IP4_ADDR_6, vrf); + SYS(fail, "ip route add %s/32 dev veth5 via %s %s", IP4_ADDR_8, IP4_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 %s", IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_7, IP6_ADDR_6, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth5 via %s %s", IP6_ADDR_8, IP6_ADDR_6, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns2(const char *ns2, const char *vrf) +{ + struct nstoken *nstoken = NULL; + + if (!ns2 || !vrf) + goto fail; + + nstoken = open_netns(ns2); + if (!ASSERT_OK_PTR(nstoken, "open ns2")) + goto fail; + + SYS(fail, "ip netns exec %s sysctl -wq net.ipv4.ip_forward=1", ns2); + SYS(fail, "ip netns exec %s sysctl -wq net.ipv6.conf.all.forwarding=1", ns2); + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth2 %s", IP4_ADDR_1, vrf); + SYS(fail, "ip route add %s/32 dev veth3 %s", IP4_ADDR_4, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth2 %s", IP6_ADDR_1, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth3 %s", IP6_ADDR_4, vrf); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth6 %s", IP4_ADDR_5, vrf); + SYS(fail, "ip route add %s/32 dev veth7 %s", IP4_ADDR_8, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth6 %s", IP6_ADDR_5, vrf); + SYS(fail, "ip -6 route add %s/128 dev veth7 %s", IP6_ADDR_8, vrf); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int configure_ns3(const char *ns3) +{ + struct nstoken *nstoken = NULL; + + if (!ns3) + goto fail; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + goto fail; + + /* Top route */ + SYS(fail, "ip route add %s/32 dev veth4", IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_1, IP4_ADDR_3); + SYS(fail, "ip route add %s/32 dev veth4 via %s", IP4_ADDR_2, IP4_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4", IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_1, IP6_ADDR_3); + SYS(fail, "ip -6 route add %s/128 dev veth4 via %s", IP6_ADDR_2, IP6_ADDR_3); + /* Bottom route */ + SYS(fail, "ip route add %s/32 dev veth8", IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_5, IP4_ADDR_7); + SYS(fail, "ip route add %s/32 dev veth8 via %s", IP4_ADDR_6, IP4_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8", IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_5, IP6_ADDR_7); + SYS(fail, "ip -6 route add %s/128 dev veth8 via %s", IP6_ADDR_6, IP6_ADDR_7); + + /* Configure IPv4 GRE device */ + SYS(fail, "ip tunnel add gre_dev mode gre remote %s local %s ttl 255", + IP4_ADDR_1, IP4_ADDR_GRE); + SYS(fail, "ip link set gre_dev up"); + SYS(fail, "ip a add %s dev gre_dev", IP4_ADDR_GRE); + + /* Configure IPv6 GRE device */ + SYS(fail, "ip tunnel add gre6_dev mode ip6gre remote %s local %s ttl 255", + IP6_ADDR_1, IP6_ADDR_GRE); + SYS(fail, "ip link set gre6_dev up"); + SYS(fail, "ip a add %s dev gre6_dev", IP6_ADDR_GRE); + + close_netns(nstoken); + return 0; +fail: + close_netns(nstoken); + return -1; +} + +static int setup_network(char *ns1, char *ns2, char *ns3, const char *vrf) +{ + if (!ns1 || !ns2 || !ns3 || !vrf) + goto fail; + + SYS(fail, "ip -n %s link add veth1 type veth peer name veth2 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth3 type veth peer name veth4 netns %s", ns2, ns3); + SYS(fail, "ip -n %s link add veth5 type veth peer name veth6 netns %s", ns1, ns2); + SYS(fail, "ip -n %s link add veth7 type veth peer name veth8 netns %s", ns2, ns3); + + if (vrf[0]) { + if (!ASSERT_OK(configure_vrf(ns1, ns2), "configure vrf")) + goto fail; + } + if (!ASSERT_OK(set_top_addr(ns1, ns2, ns3), "set top addresses")) + goto fail; + + if (!ASSERT_OK(set_bottom_addr(ns1, ns2, ns3), "set bottom addresses")) + goto fail; + + if (!ASSERT_OK(configure_ns1(ns1, vrf), "configure ns1 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns2(ns2, vrf), "configure ns2 routes")) + goto fail; + + if (!ASSERT_OK(configure_ns3(ns3), "configure ns3 routes")) + goto fail; + + /* Link bottom route to the GRE tunnels */ + SYS(fail, "ip -n %s route add %s/32 dev veth5 via %s %s", + ns1, IP4_ADDR_GRE, IP4_ADDR_6, vrf); + SYS(fail, "ip -n %s route add %s/32 dev veth7 via %s %s", + ns2, IP4_ADDR_GRE, IP4_ADDR_8, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth5 via %s %s", + ns1, IP6_ADDR_GRE, IP6_ADDR_6, vrf); + SYS(fail, "ip -n %s -6 route add %s/128 dev veth7 via %s %s", + ns2, IP6_ADDR_GRE, IP6_ADDR_8, vrf); + + return 0; +fail: + return -1; +} + +int remove_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route del %s dev veth5 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route del %s dev veth7 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth5 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route del %s/128 dev veth7 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +int add_unreachable_routes_to_gredev(const char *ns1, const char *ns2, const char *vrf) +{ + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns1, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s route add unreachable %s/32 %s", ns2, IP4_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns1, IP6_ADDR_GRE, vrf); + SYS(fail, "ip -n %s -6 route add unreachable %s/128 %s", ns2, IP6_ADDR_GRE, vrf); + + return 0; +fail: + return -1; +} + +#define GSO_SIZE 5000 +#define GSO_TCP_PORT 9000 +/* This tests the fix from commit ea0371f78799 ("net: fix GSO in bpf_lwt_push_ip_encap") */ +static int test_gso_fix(const char *ns1, const char *ns3, int family) +{ + const char *ip_addr = family == AF_INET ? IP4_ADDR_DST : IP6_ADDR_DST; + char gso_packet[GSO_SIZE] = {}; + struct nstoken *nstoken = NULL; + int sfd, cfd, afd; + ssize_t bytes; + int ret = -1; + + if (!ns1 || !ns3) + return ret; + + nstoken = open_netns(ns3); + if (!ASSERT_OK_PTR(nstoken, "open ns3")) + return ret; + + sfd = start_server_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(sfd, "start server")) + goto close_netns; + + close_netns(nstoken); + + nstoken = open_netns(ns1); + if (!ASSERT_OK_PTR(nstoken, "open ns1")) + goto close_server; + + cfd = connect_to_addr_str(family, SOCK_STREAM, ip_addr, GSO_TCP_PORT, NULL); + if (!ASSERT_OK_FD(cfd, "connect to server")) + goto close_server; + + close_netns(nstoken); + nstoken = NULL; + + afd = accept(sfd, NULL, NULL); + if (!ASSERT_OK_FD(afd, "accept")) + goto close_client; + + /* Send a packet larger than MTU */ + bytes = send(cfd, gso_packet, GSO_SIZE, 0); + if (!ASSERT_EQ(bytes, GSO_SIZE, "send packet")) + goto close_accept; + + /* Verify we received all expected bytes */ + bytes = read(afd, gso_packet, GSO_SIZE); + if (!ASSERT_EQ(bytes, GSO_SIZE, "receive packet")) + goto close_accept; + + ret = 0; + +close_accept: + close(afd); +close_client: + close(cfd); +close_server: + close(sfd); +close_netns: + close_netns(nstoken); + + return ret; +} + +static int check_ping_ok(const char *ns1) +{ + SYS(fail, "ip netns exec %s ping -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP4_ADDR_DST); + SYS(fail, "ip netns exec %s ping6 -c 1 -W1 -I veth1 %s > /dev/null", ns1, IP6_ADDR_DST); + return 0; +fail: + return -1; +} + +static int check_ping_fails(const char *ns1) +{ + int ret; + + ret = SYS_NOFAIL("ip netns exec %s ping -c 1 -W1 -I veth1 %s", ns1, IP4_ADDR_DST); + if (!ret) + return -1; + + ret = SYS_NOFAIL("ip netns exec %s ping6 -c 1 -W1 -I veth1 %s", ns1, IP6_ADDR_DST); + if (!ret) + return -1; + + return 0; +} + +#define EGRESS true +#define INGRESS false +#define IPV4_ENCAP true +#define IPV6_ENCAP false +static void lwt_ip_encap(bool ipv4_encap, bool egress, const char *vrf) +{ + char ns1[NETNS_NAME_SIZE] = NETNS_BASE "-1-"; + char ns2[NETNS_NAME_SIZE] = NETNS_BASE "-2-"; + char ns3[NETNS_NAME_SIZE] = NETNS_BASE "-3-"; + char *sec = ipv4_encap ? "encap_gre" : "encap_gre6"; + + if (!vrf) + return; + + if (!ASSERT_OK(create_ns(ns1, NETNS_NAME_SIZE), "create ns1")) + goto out; + if (!ASSERT_OK(create_ns(ns2, NETNS_NAME_SIZE), "create ns2")) + goto out; + if (!ASSERT_OK(create_ns(ns3, NETNS_NAME_SIZE), "create ns3")) + goto out; + + if (!ASSERT_OK(setup_network(ns1, ns2, ns3, vrf), "setup network")) + goto out; + + /* By default, pings work */ + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Remove NS2->DST routes, ping fails */ + SYS(out, "ip -n %s route del %s/32 dev veth3 %s", ns2, IP4_ADDR_DST, vrf); + SYS(out, "ip -n %s -6 route del %s/128 dev veth3 %s", ns2, IP6_ADDR_DST, vrf); + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Install replacement routes (LWT/eBPF), pings succeed */ + if (egress) { + SYS(out, "ip -n %s route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf xmit obj %s sec %s dev veth1 %s", + ns1, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } else { + SYS(out, "ip -n %s route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP4_ADDR_DST, BPF_FILE, sec, vrf); + SYS(out, "ip -n %s -6 route add %s encap bpf in obj %s sec %s dev veth2 %s", + ns2, IP6_ADDR_DST, BPF_FILE, sec, vrf); + } + + if (!ASSERT_OK(check_ping_ok(ns1), "ping OK")) + goto out; + + /* Skip GSO tests with VRF: VRF routing needs properly assigned + * source IP/device, which is easy to do with ping but hard with TCP. + */ + if (egress && !vrf[0]) { + if (!ASSERT_OK(test_gso_fix(ns1, ns3, AF_INET), "test GSO")) + goto out; + } + + /* Negative test: remove routes to GRE devices: ping fails */ + if (!ASSERT_OK(remove_routes_to_gredev(ns1, ns2, vrf), "remove routes to gredev")) + goto out; + if (!ASSERT_OK(check_ping_fails(ns1), "ping expected fail")) + goto out; + + /* Another negative test */ + if (!ASSERT_OK(add_unreachable_routes_to_gredev(ns1, ns2, vrf), + "add unreachable routes")) + goto out; + ASSERT_OK(check_ping_fails(ns1), "ping expected fail"); + +out: + SYS_NOFAIL("ip netns del %s", ns1); + SYS_NOFAIL("ip netns del %s", ns2); + SYS_NOFAIL("ip netns del %s", ns3); +} + +void test_lwt_ip_encap_vrf_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_vrf_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, "vrf red"); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, "vrf red"); +} + +void test_lwt_ip_encap_ipv6(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV6_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV6_ENCAP, INGRESS, ""); +} + +void test_lwt_ip_encap_ipv4(void) +{ + if (test__start_subtest("egress")) + lwt_ip_encap(IPV4_ENCAP, EGRESS, ""); + + if (test__start_subtest("ingress")) + lwt_ip_encap(IPV4_ENCAP, INGRESS, ""); +} diff --git a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh b/tools/testing/selftests/bpf/test_lwt_ip_encap.sh deleted file mode 100755 index 1e565f47aca940d8dc7235d823c48537d7a708b8..0000000000000000000000000000000000000000 --- a/tools/testing/selftests/bpf/test_lwt_ip_encap.sh +++ /dev/null @@ -1,476 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 -# -# Setup/topology: -# -# NS1 NS2 NS3 -# veth1 <---> veth2 veth3 <---> veth4 (the top route) -# veth5 <---> veth6 veth7 <---> veth8 (the bottom route) -# -# each vethN gets IPv[4|6]_N address -# -# IPv*_SRC = IPv*_1 -# IPv*_DST = IPv*_4 -# -# all tests test pings from IPv*_SRC to IPv*_DST -# -# by default, routes are configured to allow packets to go -# IP*_1 <=> IP*_2 <=> IP*_3 <=> IP*_4 (the top route) -# -# a GRE device is installed in NS3 with IPv*_GRE, and -# NS1/NS2 are configured to route packets to IPv*_GRE via IP*_8 -# (the bottom route) -# -# Tests: -# -# 1. routes NS2->IPv*_DST are brought down, so the only way a ping -# from IP*_SRC to IP*_DST can work is via IPv*_GRE -# -# 2a. in an egress test, a bpf LWT_XMIT program is installed on veth1 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth1:egress]->GRE:decap->DST -# ping replies go DST->SRC directly -# -# 2b. in an ingress test, a bpf LWT_IN program is installed on veth2 -# that encaps the packets with an IP/GRE header to route to IPv*_GRE -# -# ping: SRC->[encap at veth2:ingress]->GRE:decap->DST -# ping replies go DST->SRC directly - -BPF_FILE="test_lwt_ip_encap.bpf.o" -if [[ $EUID -ne 0 ]]; then - echo "This script must be run as root" - echo "FAIL" - exit 1 -fi - -readonly NS1="ns1-$(mktemp -u XXXXXX)" -readonly NS2="ns2-$(mktemp -u XXXXXX)" -readonly NS3="ns3-$(mktemp -u XXXXXX)" - -readonly IPv4_1="172.16.1.100" -readonly IPv4_2="172.16.2.100" -readonly IPv4_3="172.16.3.100" -readonly IPv4_4="172.16.4.100" -readonly IPv4_5="172.16.5.100" -readonly IPv4_6="172.16.6.100" -readonly IPv4_7="172.16.7.100" -readonly IPv4_8="172.16.8.100" -readonly IPv4_GRE="172.16.16.100" - -readonly IPv4_SRC=$IPv4_1 -readonly IPv4_DST=$IPv4_4 - -readonly IPv6_1="fb01::1" -readonly IPv6_2="fb02::1" -readonly IPv6_3="fb03::1" -readonly IPv6_4="fb04::1" -readonly IPv6_5="fb05::1" -readonly IPv6_6="fb06::1" -readonly IPv6_7="fb07::1" -readonly IPv6_8="fb08::1" -readonly IPv6_GRE="fb10::1" - -readonly IPv6_SRC=$IPv6_1 -readonly IPv6_DST=$IPv6_4 - -TEST_STATUS=0 -TESTS_SUCCEEDED=0 -TESTS_FAILED=0 - -TMPFILE="" - -process_test_results() -{ - if [[ "${TEST_STATUS}" -eq 0 ]] ; then - echo "PASS" - TESTS_SUCCEEDED=$((TESTS_SUCCEEDED+1)) - else - echo "FAIL" - TESTS_FAILED=$((TESTS_FAILED+1)) - fi -} - -print_test_summary_and_exit() -{ - echo "passed tests: ${TESTS_SUCCEEDED}" - echo "failed tests: ${TESTS_FAILED}" - if [ "${TESTS_FAILED}" -eq "0" ] ; then - exit 0 - else - exit 1 - fi -} - -setup() -{ - set -e # exit on error - TEST_STATUS=0 - - # create devices and namespaces - ip netns add "${NS1}" - ip netns add "${NS2}" - ip netns add "${NS3}" - - # rp_filter gets confused by what these tests are doing, so disable it - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.all.rp_filter=0 - ip netns exec ${NS1} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS2} sysctl -wq net.ipv4.conf.default.rp_filter=0 - ip netns exec ${NS3} sysctl -wq net.ipv4.conf.default.rp_filter=0 - - # disable IPv6 DAD because it sometimes takes too long and fails tests - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.all.accept_dad=0 - ip netns exec ${NS1} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.default.accept_dad=0 - ip netns exec ${NS3} sysctl -wq net.ipv6.conf.default.accept_dad=0 - - ip link add veth1 type veth peer name veth2 - ip link add veth3 type veth peer name veth4 - ip link add veth5 type veth peer name veth6 - ip link add veth7 type veth peer name veth8 - - ip netns exec ${NS2} sysctl -wq net.ipv4.ip_forward=1 - ip netns exec ${NS2} sysctl -wq net.ipv6.conf.all.forwarding=1 - - ip link set veth1 netns ${NS1} - ip link set veth2 netns ${NS2} - ip link set veth3 netns ${NS2} - ip link set veth4 netns ${NS3} - ip link set veth5 netns ${NS1} - ip link set veth6 netns ${NS2} - ip link set veth7 netns ${NS2} - ip link set veth8 netns ${NS3} - - if [ ! -z "${VRF}" ] ; then - ip -netns ${NS1} link add red type vrf table 1001 - ip -netns ${NS1} link set red up - ip -netns ${NS1} route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS1} link set veth1 vrf red - ip -netns ${NS1} link set veth5 vrf red - - ip -netns ${NS2} link add red type vrf table 1001 - ip -netns ${NS2} link set red up - ip -netns ${NS2} route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} -6 route add table 1001 unreachable default metric 8192 - ip -netns ${NS2} link set veth2 vrf red - ip -netns ${NS2} link set veth3 vrf red - ip -netns ${NS2} link set veth6 vrf red - ip -netns ${NS2} link set veth7 vrf red - fi - - # configure addesses: the top route (1-2-3-4) - ip -netns ${NS1} addr add ${IPv4_1}/24 dev veth1 - ip -netns ${NS2} addr add ${IPv4_2}/24 dev veth2 - ip -netns ${NS2} addr add ${IPv4_3}/24 dev veth3 - ip -netns ${NS3} addr add ${IPv4_4}/24 dev veth4 - ip -netns ${NS1} -6 addr add ${IPv6_1}/128 nodad dev veth1 - ip -netns ${NS2} -6 addr add ${IPv6_2}/128 nodad dev veth2 - ip -netns ${NS2} -6 addr add ${IPv6_3}/128 nodad dev veth3 - ip -netns ${NS3} -6 addr add ${IPv6_4}/128 nodad dev veth4 - - # configure addresses: the bottom route (5-6-7-8) - ip -netns ${NS1} addr add ${IPv4_5}/24 dev veth5 - ip -netns ${NS2} addr add ${IPv4_6}/24 dev veth6 - ip -netns ${NS2} addr add ${IPv4_7}/24 dev veth7 - ip -netns ${NS3} addr add ${IPv4_8}/24 dev veth8 - ip -netns ${NS1} -6 addr add ${IPv6_5}/128 nodad dev veth5 - ip -netns ${NS2} -6 addr add ${IPv6_6}/128 nodad dev veth6 - ip -netns ${NS2} -6 addr add ${IPv6_7}/128 nodad dev veth7 - ip -netns ${NS3} -6 addr add ${IPv6_8}/128 nodad dev veth8 - - ip -netns ${NS1} link set dev veth1 up - ip -netns ${NS2} link set dev veth2 up - ip -netns ${NS2} link set dev veth3 up - ip -netns ${NS3} link set dev veth4 up - ip -netns ${NS1} link set dev veth5 up - ip -netns ${NS2} link set dev veth6 up - ip -netns ${NS2} link set dev veth7 up - ip -netns ${NS3} link set dev veth8 up - - # configure routes: IP*_SRC -> veth1/IP*_2 (= top route) default; - # the bottom route to specific bottom addresses - - # NS1 - # top route - ip -netns ${NS1} route add ${IPv4_2}/32 dev veth1 ${VRF} - ip -netns ${NS1} route add default dev veth1 via ${IPv4_2} ${VRF} # go top by default - ip -netns ${NS1} -6 route add ${IPv6_2}/128 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add default dev veth1 via ${IPv6_2} ${VRF} # go top by default - # bottom route - ip -netns ${NS1} route add ${IPv4_6}/32 dev veth5 ${VRF} - ip -netns ${NS1} route add ${IPv4_7}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} route add ${IPv4_8}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_6}/128 dev veth5 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_7}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_8}/128 dev veth5 via ${IPv6_6} ${VRF} - - # NS2 - # top route - ip -netns ${NS2} route add ${IPv4_1}/32 dev veth2 ${VRF} - ip -netns ${NS2} route add ${IPv4_4}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_1}/128 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_4}/128 dev veth3 ${VRF} - # bottom route - ip -netns ${NS2} route add ${IPv4_5}/32 dev veth6 ${VRF} - ip -netns ${NS2} route add ${IPv4_8}/32 dev veth7 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_5}/128 dev veth6 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_8}/128 dev veth7 ${VRF} - - # NS3 - # top route - ip -netns ${NS3} route add ${IPv4_3}/32 dev veth4 - ip -netns ${NS3} route add ${IPv4_1}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} route add ${IPv4_2}/32 dev veth4 via ${IPv4_3} - ip -netns ${NS3} -6 route add ${IPv6_3}/128 dev veth4 - ip -netns ${NS3} -6 route add ${IPv6_1}/128 dev veth4 via ${IPv6_3} - ip -netns ${NS3} -6 route add ${IPv6_2}/128 dev veth4 via ${IPv6_3} - # bottom route - ip -netns ${NS3} route add ${IPv4_7}/32 dev veth8 - ip -netns ${NS3} route add ${IPv4_5}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} route add ${IPv4_6}/32 dev veth8 via ${IPv4_7} - ip -netns ${NS3} -6 route add ${IPv6_7}/128 dev veth8 - ip -netns ${NS3} -6 route add ${IPv6_5}/128 dev veth8 via ${IPv6_7} - ip -netns ${NS3} -6 route add ${IPv6_6}/128 dev veth8 via ${IPv6_7} - - # configure IPv4 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} tunnel add gre_dev mode gre remote ${IPv4_1} local ${IPv4_GRE} ttl 255 - ip -netns ${NS3} link set gre_dev up - ip -netns ${NS3} addr add ${IPv4_GRE} dev gre_dev - ip -netns ${NS1} route add ${IPv4_GRE}/32 dev veth5 via ${IPv4_6} ${VRF} - ip -netns ${NS2} route add ${IPv4_GRE}/32 dev veth7 via ${IPv4_8} ${VRF} - - - # configure IPv6 GRE device in NS3, and a route to it via the "bottom" route - ip -netns ${NS3} -6 tunnel add name gre6_dev mode ip6gre remote ${IPv6_1} local ${IPv6_GRE} ttl 255 - ip -netns ${NS3} link set gre6_dev up - ip -netns ${NS3} -6 addr add ${IPv6_GRE} nodad dev gre6_dev - ip -netns ${NS1} -6 route add ${IPv6_GRE}/128 dev veth5 via ${IPv6_6} ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_GRE}/128 dev veth7 via ${IPv6_8} ${VRF} - - TMPFILE=$(mktemp /tmp/test_lwt_ip_encap.XXXXXX) - - sleep 1 # reduce flakiness - set +e -} - -cleanup() -{ - if [ -f ${TMPFILE} ] ; then - rm ${TMPFILE} - fi - - ip netns del ${NS1} 2> /dev/null - ip netns del ${NS2} 2> /dev/null - ip netns del ${NS3} 2> /dev/null -} - -trap cleanup EXIT - -remove_routes_to_gredev() -{ - ip -netns ${NS1} route del ${IPv4_GRE} dev veth5 ${VRF} - ip -netns ${NS2} route del ${IPv4_GRE} dev veth7 ${VRF} - ip -netns ${NS1} -6 route del ${IPv6_GRE}/128 dev veth5 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_GRE}/128 dev veth7 ${VRF} -} - -add_unreachable_routes_to_gredev() -{ - ip -netns ${NS1} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS2} route add unreachable ${IPv4_GRE}/32 ${VRF} - ip -netns ${NS1} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} - ip -netns ${NS2} -6 route add unreachable ${IPv6_GRE}/128 ${VRF} -} - -test_ping() -{ - local readonly PROTO=$1 - local readonly EXPECTED=$2 - local RET=0 - - if [ "${PROTO}" == "IPv4" ] ; then - ip netns exec ${NS1} ping -c 1 -W 1 -I veth1 ${IPv4_DST} 2>&1 > /dev/null - RET=$? - elif [ "${PROTO}" == "IPv6" ] ; then - ip netns exec ${NS1} ping6 -c 1 -W 1 -I veth1 ${IPv6_DST} 2>&1 > /dev/null - RET=$? - else - echo " test_ping: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - - if [ "0" != "${RET}" ]; then - RET=1 - fi - - if [ "${EXPECTED}" != "${RET}" ] ; then - echo " test_ping failed: expected: ${EXPECTED}; got ${RET}" - TEST_STATUS=1 - fi -} - -test_gso() -{ - local readonly PROTO=$1 - local readonly PKT_SZ=5000 - local IP_DST="" - : > ${TMPFILE} # trim the capture file - - # check that nc is present - command -v nc >/dev/null 2>&1 || \ - { echo >&2 "nc is not available: skipping TSO tests"; return; } - - # listen on port 9000, capture TCP into $TMPFILE - if [ "${PROTO}" == "IPv4" ] ; then - IP_DST=${IPv4_DST} - ip netns exec ${NS3} bash -c \ - "nc -4 -l -p 9000 > ${TMPFILE} &" - elif [ "${PROTO}" == "IPv6" ] ; then - IP_DST=${IPv6_DST} - ip netns exec ${NS3} bash -c \ - "nc -6 -l -p 9000 > ${TMPFILE} &" - RET=$? - else - echo " test_gso: unknown PROTO: ${PROTO}" - TEST_STATUS=1 - fi - sleep 1 # let nc start listening - - # send a packet larger than MTU - ip netns exec ${NS1} bash -c \ - "dd if=/dev/zero bs=$PKT_SZ count=1 > /dev/tcp/${IP_DST}/9000 2>/dev/null" - sleep 2 # let the packet get delivered - - # verify we received all expected bytes - SZ=$(stat -c %s ${TMPFILE}) - if [ "$SZ" != "$PKT_SZ" ] ; then - echo " test_gso failed: ${PROTO}" - TEST_STATUS=1 - fi -} - -test_egress() -{ - local readonly ENCAP=$1 - echo "starting egress ${ENCAP} encap test ${VRF}" - setup - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, ping fails - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre dev veth1 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS1} route add ${IPv4_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - ip -netns ${NS1} -6 route add ${IPv6_DST} encap bpf xmit obj \ - ${BPF_FILE} sec encap_gre6 dev veth1 ${VRF} - else - echo " unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # skip GSO tests with VRF: VRF routing needs properly assigned - # source IP/device, which is easy to do with ping and hard with dd/nc. - if [ -z "${VRF}" ] ; then - test_gso IPv4 - test_gso IPv6 - fi - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -test_ingress() -{ - local readonly ENCAP=$1 - echo "starting ingress ${ENCAP} encap test ${VRF}" - setup - - # need to wait a bit for IPv6 to autoconf, otherwise - # ping6 sometimes fails with "unable to bind to address" - - # by default, pings work - test_ping IPv4 0 - test_ping IPv6 0 - - # remove NS2->DST routes, pings fail - ip -netns ${NS2} route del ${IPv4_DST}/32 dev veth3 ${VRF} - ip -netns ${NS2} -6 route del ${IPv6_DST}/128 dev veth3 ${VRF} - test_ping IPv4 1 - test_ping IPv6 1 - - # install replacement routes (LWT/eBPF), pings succeed - if [ "${ENCAP}" == "IPv4" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre dev veth2 ${VRF} - elif [ "${ENCAP}" == "IPv6" ] ; then - ip -netns ${NS2} route add ${IPv4_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - ip -netns ${NS2} -6 route add ${IPv6_DST} encap bpf in obj \ - ${BPF_FILE} sec encap_gre6 dev veth2 ${VRF} - else - echo "FAIL: unknown encap ${ENCAP}" - TEST_STATUS=1 - fi - test_ping IPv4 0 - test_ping IPv6 0 - - # a negative test: remove routes to GRE devices: ping fails - remove_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - # another negative test - add_unreachable_routes_to_gredev - test_ping IPv4 1 - test_ping IPv6 1 - - cleanup - process_test_results -} - -VRF="" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -VRF="vrf red" -test_egress IPv4 -test_egress IPv6 -test_ingress IPv4 -test_ingress IPv6 - -print_test_summary_and_exit --- base-commit: 5fd21aaac37919abc5c5d0df1eb06a9f02518f27 change-id: 20250206-lwt_ip-b6a91d2787bf Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 days, 4 hours

1
0
0 0

[PATCH v2 0/4] RISC-V KVM PMU fix and selftest improvement

by Atish Patra

This series adds a fix for KVM PMU code and improves the pmu selftest by allowing generating precise number of interrupts. It also provided another additional option to the overflow test that allows user to generate custom number of LCOFI interrupts. Signed-off-by: Atish Patra <atishp(a)rivosinc.com> --- Changes in v2: - Initialized the local overflow irq variable to 0 indicate that it's not a allowed value. - Moved the introduction of argument option `n` to the last patch. - Link to v1: https://lore.kernel.org/r/20250226-kvm_pmu_improve-v1-0-74c058c2bf6d@rivosi… --- Atish Patra (4): RISC-V: KVM: Disable the kernel perf counter during configure KVM: riscv: selftests: Do not start the counter in the overflow handler KVM: riscv: selftests: Change command line option KVM: riscv: selftests: Allow number of interrupts to be configurable arch/riscv/kvm/vcpu_pmu.c | 1 + tools/testing/selftests/kvm/riscv/sbi_pmu_test.c | 81 ++++++++++++++++-------- 2 files changed, 57 insertions(+), 25 deletions(-) --- base-commit: 0ad2507d5d93f39619fc42372c347d6006b64319 change-id: 20250225-kvm_pmu_improve-fffd038b2404 -- Regards, Atish patra

2 days, 4 hours

2
5
0 0

[PATCH 0/4] RISC-V KVM PMU fix and selftest improvement

by Atish Patra

This series adds a fix for KVM PMU code and improves the pmu selftest by allowing generating precise number of interrupts. It also provided another additional option to the overflow test that allows user to generate custom number of LCOFI interrupts. Signed-off-by: Atish Patra <atishp(a)rivosinc.com> --- Atish Patra (4): RISC-V: KVM: Disable the kernel perf counter during configure KVM: riscv: selftests: Do not start the counter in the overflow handler KVM: riscv: selftests: Change command line option KVM: riscv: selftests: Allow number of interrupts to be configurable arch/riscv/kvm/vcpu_pmu.c | 1 + tools/testing/selftests/kvm/riscv/sbi_pmu_test.c | 81 ++++++++++++++++-------- 2 files changed, 57 insertions(+), 25 deletions(-) --- base-commit: 0ad2507d5d93f39619fc42372c347d6006b64319 change-id: 20250225-kvm_pmu_improve-fffd038b2404 -- Regards, Atish patra

2 days, 4 hours

3
11
0 0

[PATCH v2 1/5] tools/nolibc: add support for openat(2)

by Louis Taylor

openat is useful to avoid needing to construct relative paths, so expose a wrapper for using it directly. Signed-off-by: Louis Taylor <louis(a)kragniz.eu> --- tools/include/nolibc/sys.h | 25 ++++++++++++++++++++ tools/testing/selftests/nolibc/nolibc-test.c | 21 ++++++++++++++++ 2 files changed, 46 insertions(+) diff --git a/tools/include/nolibc/sys.h b/tools/include/nolibc/sys.h index 8f44c33b1213..3cd938f9abda 100644 --- a/tools/include/nolibc/sys.h +++ b/tools/include/nolibc/sys.h @@ -765,6 +765,31 @@ int mount(const char *src, const char *tgt, return __sysret(sys_mount(src, tgt, fst, flags, data)); } +/* + * int openat(int dirfd, const char *path, int flags[, mode_t mode]); + */ + +static __attribute__((unused)) +int sys_openat(int dirfd, const char *path, int flags, mode_t mode) +{ + return my_syscall4(__NR_openat, dirfd, path, flags, mode); +} + +static __attribute__((unused)) +int openat(int dirfd, const char *path, int flags, ...) +{ + mode_t mode = 0; + + if (flags & O_CREAT) { + va_list args; + + va_start(args, flags); + mode = va_arg(args, mode_t); + va_end(args); + } + + return __sysret(sys_openat(dirfd, path, flags, mode)); +} /* * int open(const char *path, int flags[, mode_t mode]); diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index 79c3e6a845f3..2a1629938dd6 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -1028,6 +1028,26 @@ int test_rlimit(void) return 0; } +static int test_openat(void) +{ + int dev; + int null; + + dev = openat(AT_FDCWD, "/dev", O_DIRECTORY); + if (dev < 0) + return -1; + + null = openat(dev, "null", 0); + if (null < 0) { + close(dev); + return -1; + } + + close(dev); + close(null); + + return 0; +} /* Run syscall tests between IDs <min> and <max>. * Return 0 on success, non-zero on failure. @@ -1116,6 +1136,7 @@ int run_syscall(int min, int max) CASE_TEST(mmap_munmap_good); EXPECT_SYSZR(1, test_mmap_munmap()); break; CASE_TEST(open_tty); EXPECT_SYSNE(1, tmp = open("/dev/null", 0), -1); if (tmp != -1) close(tmp); break; CASE_TEST(open_blah); EXPECT_SYSER(1, tmp = open("/proc/self/blah", 0), -1, ENOENT); if (tmp != -1) close(tmp); break; + CASE_TEST(openat_dir); EXPECT_SYSNE(1, test_openat(), -1); break; CASE_TEST(pipe); EXPECT_SYSZR(1, test_pipe()); break; CASE_TEST(poll_null); EXPECT_SYSZR(1, poll(NULL, 0, 0)); break; CASE_TEST(poll_stdout); EXPECT_SYSNE(1, ({ struct pollfd fds = { 1, POLLOUT, 0}; poll(&fds, 1, 0); }), -1); break; -- 2.45.2

2 days, 5 hours

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2025