September 2025 - Linux-kselftest-mirror

[PATCH v6 00/11] Direct Map Removal Support for guest_memfd

by Roy, Patrick

[ based on kvm/next ] Unmapping virtual machine guest memory from the host kernel's direct map is a successful mitigation against Spectre-style transient execution issues: If the kernel page tables do not contain entries pointing to guest memory, then any attempted speculative read through the direct map will necessarily be blocked by the MMU before any observable microarchitectural side-effects happen. This means that Spectre-gadgets and similar cannot be used to target virtual machine memory. Roughly 60% of speculative execution issues fall into this category [1, Table 1]. This patch series extends guest_memfd with the ability to remove its memory from the host kernel's direct map, to be able to attain the above protection for KVM guests running inside guest_memfd. Additionally, a Firecracker branch with support for these VMs can be found on GitHub [2]. For more details, please refer to the v5 cover letter [v5]. No substantial changes in design have taken place since. === Changes Since v5 === - Fix up error handling for set_direct_map_[in]valid_noflush() (Mike) - Fix capability check for KVM_GUEST_MEMFD_NO_DIRECT_MAP (Mike) - Make secretmem_aops static in mm/secretmem.c (Mike) - Fixup some more comments in gup.c that referred to secretmem specifically to instead point to AS_NO_DIRECT_MAP (Mike) - New patch (PATCH 4/11) to avoid ifdeffery in kvm_gmem_free_folio() (Mike) - vma_is_no_direct_map() -> vma_has_no_direct_map() rename (David) - Squash some patches (David) - Fix up const-ness of parameters to new functions in pagemap.h (Fuad) [1]: https://download.vusec.net/papers/quarantine_raid23.pdf [2]: https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hidi… [RFCv1]: https://lore.kernel.org/kvm/20240709132041.3625501-1-roypat@amazon.co.uk/ [RFCv2]: https://lore.kernel.org/kvm/20240910163038.1298452-1-roypat@amazon.co.uk/ [RFCv3]: https://lore.kernel.org/kvm/20241030134912.515725-1-roypat@amazon.co.uk/ [v4]: https://lore.kernel.org/kvm/20250221160728.1584559-1-roypat@amazon.co.uk/ [v5]: https://lore.kernel.org/kvm/20250828093902.2719-1-roypat@amazon.co.uk/ Elliot Berman (1): filemap: Pass address_space mapping to ->free_folio() Patrick Roy (10): arch: export set_direct_map_valid_noflush to KVM module mm: introduce AS_NO_DIRECT_MAP KVM: guest_memfd: Add stub for kvm_arch_gmem_invalidate KVM: guest_memfd: Add flag to remove from direct map KVM: selftests: load elf via bounce buffer KVM: selftests: set KVM_MEM_GUEST_MEMFD in vm_mem_add() if guest_memfd != -1 KVM: selftests: Add guest_memfd based vm_mem_backing_src_types KVM: selftests: stuff vm_mem_backing_src_type into vm_shape KVM: selftests: cover GUEST_MEMFD_FLAG_NO_DIRECT_MAP in existing selftests KVM: selftests: Test guest execution from direct map removed gmem Documentation/filesystems/locking.rst | 2 +- Documentation/virt/kvm/api.rst | 5 ++ arch/arm64/include/asm/kvm_host.h | 12 ++++ arch/arm64/mm/pageattr.c | 1 + arch/loongarch/mm/pageattr.c | 1 + arch/riscv/mm/pageattr.c | 1 + arch/s390/mm/pageattr.c | 1 + arch/x86/mm/pat/set_memory.c | 1 + fs/nfs/dir.c | 11 ++-- fs/orangefs/inode.c | 3 +- include/linux/fs.h | 2 +- include/linux/kvm_host.h | 9 +++ include/linux/pagemap.h | 16 +++++ include/linux/secretmem.h | 18 ------ include/uapi/linux/kvm.h | 2 + lib/buildid.c | 4 +- mm/filemap.c | 9 +-- mm/gup.c | 19 ++---- mm/mlock.c | 2 +- mm/secretmem.c | 11 ++-- mm/vmscan.c | 4 +- .../testing/selftests/kvm/guest_memfd_test.c | 2 + .../testing/selftests/kvm/include/kvm_util.h | 37 ++++++++--- .../testing/selftests/kvm/include/test_util.h | 8 +++ tools/testing/selftests/kvm/lib/elf.c | 8 +-- tools/testing/selftests/kvm/lib/io.c | 23 +++++++ tools/testing/selftests/kvm/lib/kvm_util.c | 61 +++++++++++-------- tools/testing/selftests/kvm/lib/test_util.c | 8 +++ tools/testing/selftests/kvm/lib/x86/sev.c | 1 + .../selftests/kvm/pre_fault_memory_test.c | 1 + .../selftests/kvm/set_memory_region_test.c | 50 +++++++++++++-- .../kvm/x86/private_mem_conversions_test.c | 7 ++- virt/kvm/guest_memfd.c | 56 ++++++++++++++--- virt/kvm/kvm_main.c | 5 ++ 34 files changed, 288 insertions(+), 113 deletions(-) base-commit: a6ad54137af92535cfe32e19e5f3bc1bb7dbd383 -- 2.50.1

1 week, 3 days

6
20
0 0

[PATCH] selftests: riscv: Add README for RISC-V KSelfTest

by Bala-Vignesh-Reddy

Add a README file for RISC-V specific kernel selftests under tools/testing/selftests/riscv/. This mirrors the existing README for arm64, providing clear guidance on how the tests are architecture specific and skipped on non-riscv systems. It also includes standard make commands for building, running and installing the tests, along with a reference to general kselftest documentation. Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979(a)gmail.com> --- tools/testing/selftests/riscv/README | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 tools/testing/selftests/riscv/README diff --git a/tools/testing/selftests/riscv/README b/tools/testing/selftests/riscv/README new file mode 100644 index 000000000000..443da395da68 --- /dev/null +++ b/tools/testing/selftests/riscv/README @@ -0,0 +1,24 @@ +KSelfTest RISC-V +================ + +- These tests are riscv specific and so not built or run but just skipped + completely when env-variable ARCH is found to be different than 'riscv'. + +- Holding true the above, RISC-V KSFT tests can be run within the + KSelfTest framework using standard Linux top-level-makefile targets: + + $ make TARGETS=riscv kselftest-clean + $ make TARGETS=riscv kselftest + + or + + $ make -C tools/testing/selftests TARGETS=riscv \ + INSTALL_PATH=<your-installation-path> install + + or, alternatively, only specific riscv/ subtargets can be picked: + + $ make -C tools/testing/selftests TARGETS=riscv RISCV_SUBTARGETS="mm vector" \ + INSTALL_PATH=<your-installation-path> install + + Further details on building and running KSFT can be found in: + Documentation/dev-tools/kselftest.rst -- 2.43.0

1 week, 4 days

3
2
0 0

[PATCH v2 0/7] vma count: fixes, test and improvements

by Kalesh Singh

Hi all, This is v2 to the VMA count patch I previously posted at: https://lore.kernel.org/r/20250903232437.1454293-1-kaleshsingh@google.com/ I've split it into multiple patches to address the feedback. The main changes in v2 are: - Use a capacity-based check for VMA count limit, per Lorenzo. - Rename map_count to vma_count, per David. - Add assertions for exceeding the limit, per Pedro. - Add tests for max_vma_count, per Liam. - Emit a trace event for failure due to insufficient capacity for observability Tested on x86_64 and arm64: - Build test: - allyesconfig for rename - Selftests: cd tools/testing/selftests/mm && \ make && \ ./run_vmtests.sh -t max_vma_count (With trace_max_vma_count_exceeded enabled) - vma tests: cd tools/testing/vma && \ make && \ ./vma Thanks, Kalesh Kalesh Singh (7): mm: fix off-by-one error in VMA count limit checks mm/selftests: add max_vma_count tests mm: introduce vma_count_remaining() mm: rename mm_struct::map_count to vma_count mm: harden vma_count against direct modification mm: add assertion for VMA count limit mm/tracing: introduce max_vma_count_exceeded trace event fs/binfmt_elf.c | 2 +- fs/coredump.c | 2 +- include/linux/mm.h | 35 +- include/linux/mm_types.h | 5 +- include/trace/events/vma.h | 32 + kernel/fork.c | 2 +- mm/debug.c | 2 +- mm/internal.h | 1 + mm/mmap.c | 28 +- mm/mremap.c | 13 +- mm/nommu.c | 8 +- mm/util.c | 1 - mm/vma.c | 88 ++- tools/testing/selftests/mm/Makefile | 1 + .../selftests/mm/max_vma_count_tests.c | 709 ++++++++++++++++++ tools/testing/selftests/mm/run_vmtests.sh | 5 + tools/testing/vma/vma.c | 32 +- tools/testing/vma/vma_internal.h | 44 +- 18 files changed, 949 insertions(+), 61 deletions(-) create mode 100644 include/trace/events/vma.h create mode 100644 tools/testing/selftests/mm/max_vma_count_tests.c base-commit: f83ec76bf285bea5727f478a68b894f5543ca76e -- 2.51.0.384.g4c02a37b29-goog

1 week, 4 days

8
64
0 0

[PATCH] selftests: always install UAPI headers to the correct directory

by Thomas Weißschuh

Currently the UAPI headers are always installed into the source directory. When building out-of-tree this doesn't work, as the include path will be wrong and it dirties the source tree, leading to complains by kbuild. Make sure the 'headers' target installs the UAPI headers in the correctly. The real target directory can come from multiple places. To handle them all extract the target directory from KHDR_INCLUDES. Reported-by: Jason Gunthorpe <jgg(a)nvidia.com> Closes: https://lore.kernel.org/lkml/20250917153209.GA2023406@nvidia.com/ Fixes: 1a59f5d31569 ("selftests: Add headers target") Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Jason Gunthorpe <jgg(a)nvidia.com> --- tools/testing/selftests/lib.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 5303900339292e618dee4fd7ff8a7c2fa3209a68..a448fae57831d86098806adaff53f6f1a747febb 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -228,7 +228,10 @@ $(OUTPUT)/%:%.S $(LINK.S) $^ $(LDLIBS) -o $@ endif +# Extract the expected header directory +khdr_output := $(patsubst %/usr/include,%,$(filter %/usr/include,$(KHDR_INCLUDES))) + headers: - $(Q)$(MAKE) -C $(top_srcdir) headers + $(Q)$(MAKE) -f $(top_srcdir)/Makefile -C $(khdr_output) headers .PHONY: run_tests all clean install emit_tests gen_mods_dir clean_mods_dir headers --- base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 change-id: 20250918-kselftest-uapi-out-of-tree-98d50f59040c Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

1 week, 4 days

2
1
0 0

[PATCH 0/5] arm64/sme: Support disabling streaming mode via ptrace on SME only systems

by Mark Brown

Currently it is not possible to disable streaming mode via ptrace on SME only systems, the interface for doing this is to write via NT_ARM_SVE but such writes will be rejected on a system without SVE support. Enable this functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such writes currently error since we require that a vector length is specified which should minimise the risk that existing software is relying on current behaviour. Reads are not supported since I am not aware of any use case for this and there is some risk that an existing userspace application may be confused if it reads NT_ARM_SVE on a system without SVE. Existing kernels will return FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not stored, for example if the task has not used SVE. Returning a vector length of 0 would create a risk that software could try to do things like allocate space for register state with zero sizes, while returning a vector length of 128 bits would look like SVE is supported. It seems safer to just not make the changes to add read support. It remains possible for userspace to detect a SME only system via the ptrace interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will suceed while reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in non-streaming mode is available via REGSET_FPR. The aim is is to make a minimally invasive change, no operation that would previously have succeeded will be affected, and we use a previously defined interface in new circumstances rather than define completely new ABI. The series starts with some enhancements to sve-ptrace to cover some further corners of existing behaviours in order to reduce the risk of inadvertent changes, implements the proposed new ABI, then extends both sve-ptrace and fp-ptrace to exercise it. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (5): kselftest/arm64: Verify that we reject out of bounds VLs in sve-ptrace kselftest/arm64: Check that unsupported regsets fail in sve-ptrace arm64/sme: Support disabling streaming mode via ptrace on SME only systems kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace Documentation/arch/arm64/sve.rst | 5 + arch/arm64/kernel/ptrace.c | 40 ++++++-- tools/testing/selftests/arm64/fp/fp-ptrace.c | 5 +- tools/testing/selftests/arm64/fp/sve-ptrace.c | 139 +++++++++++++++++++++++++- 4 files changed, 177 insertions(+), 12 deletions(-) --- base-commit: 768361ab16ce943ef3577cea204dc81aa4a47517 change-id: 20250717-arm64-sme-ptrace-sme-only-1fb850600ea0 prerequisite-change-id: 20250808-arm64-fp-trace-macro-02ede083da51 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 week, 4 days

3
9
0 0

kselftest and cargo

by Jarkko Sakkinen

Hi, The pre-existing kselftest for TPM2 is derived works of my earlier Python based rudimentary TPM2 stack called 'tpm2-scripts'. In order to get more coverage and more mainintainable and extensible test suite I'd like to eventually rewrite the tests with bash and tpm2sh, which is a TPM2 cli written with Rust and based on my new TPM2 stack [1] [2]. Given linux-rust work, would it be acceptable to require cargo to install a runner for kselftest? I'm finishing off now 0.11 version of the tool, which will take some time (versions before that are honestly quite bad, don't try them) but after that this would be something I'd like to put together. NOTE: while tpm2-protocol itself is Apache/MIT, tpm2sh is GPL3 licensed command-line program (for what it is worth). [1] https://github.com/puavo-org/tpm2sh [2] https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/tpm2-protocol.git/ab… BR, Jarkko

1 week, 4 days

2
6
0 0

[PATCH] kunit: test: Assert parsed_filters allocation in parse_filter_attr_test()

by Guangshuo Li

kunit_kcalloc() may fail. parse_filter_attr_test() uses the returned pointer without checking it, and then writes to parsed_filters[j], which can lead to a NULL pointer dereference under low-memory conditions. Use KUNIT_ASSERT_NOT_ERR_OR_NULL() to abort the test on allocation failure, per KUnit guidance for unsafe-to-continue cases. Fixes: 1c9fd080dffe ("kunit: fix uninitialized variables bug in attributes filtering") Fixes: 76066f93f1df ("kunit: add tests for filtering attributes") Signed-off-by: Guangshuo Li <lgs201920130244(a)gmail.com> --- lib/kunit/executor_test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c index f0090c2729cd..084636ad8a72 100644 --- a/lib/kunit/executor_test.c +++ b/lib/kunit/executor_test.c @@ -127,6 +127,10 @@ static void parse_filter_attr_test(struct kunit *test) parsed_filters = kunit_kcalloc(test, filter_count, sizeof(*parsed_filters), GFP_KERNEL); + + /* Abort test if allocation failed. */ + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parsed_filters); + for (j = 0; j < filter_count; j++) { parsed_filters[j] = kunit_next_attr_filter(&filter, &err); KUNIT_ASSERT_EQ_MSG(test, err, 0, "failed to parse filter from '%s'", filters); -- 2.43.0

1 week, 4 days

1
0
0 0

[PATCH] kselftest/arm64/gcs/basic-gcs: Respect parent directory CFLAGS

by Thomas Weißschuh

basic-gcs has it's own make rule to handle the special compiler invocation to build against nolibc. This rule does not respect the $(CFLAGS) passed by the Makefile from the parent directory. However these $(CFLAGS) set up the include path to include the UAPI headers from the current kernel. Due to this the asm/hwcap.h header is used from the toolchain instead of the UAPI and the definition of HWCAP_GCS is not found. Restructure the rule for basic-gcs to respect the $(CFLAGS). Also drop those options which are already provided by $(CFLAGS). Reported-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8B… Fixes: a985fe638344 ("kselftest/arm64/gcs: Use nolibc's getauxval()") Tested-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/testing/selftests/arm64/gcs/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile index d2f3497a9103fc12ebc90c7f4e33ab9b846c6c8a..1fbbf0ca1f0291d00882920eb2d1efbf99882ec1 100644 --- a/tools/testing/selftests/arm64/gcs/Makefile +++ b/tools/testing/selftests/arm64/gcs/Makefile @@ -14,11 +14,11 @@ LDLIBS+=-lpthread include ../../lib.mk $(OUTPUT)/basic-gcs: basic-gcs.c - $(CC) -g -fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \ - -static -include ../../../../include/nolibc/nolibc.h \ + $(CC) $(CFLAGS) -fno-asynchronous-unwind-tables -fno-ident -s -nostdlib -nostdinc \ + -static -I../../../../include/nolibc -include ../../../../include/nolibc/nolibc.h \ -I../../../../../usr/include \ -std=gnu99 -I../.. -g \ - -ffreestanding -Wall $^ -o $@ -lgcc + -ffreestanding $^ -o $@ -lgcc $(OUTPUT)/gcs-stress-thread: gcs-stress-thread.S $(CC) -nostdlib $^ -o $@ --- base-commit: 14a41628c470f4aa069075cdcf6ec0138b6cf1da change-id: 20250916-arm64-gcs-nolibc-7d1f03a2a3cf Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

1 week, 4 days

3
2
0 0

[PATCH v4 0/7] Add support for FEAT_{LS64, LS64_V} and related tests

by Yicong Yang

From: Yicong Yang <yangyicong(a)hisilicon.com> Armv8.7 introduces single-copy atomic 64-byte loads and stores instructions and its variants named under FEAT_{LS64, LS64_V}. Add support for Armv8.7 FEAT_{LS64, LS64_V}: - Add identifying and enabling in the cpufeature list - Expose the support of these features to userspace through HWCAP3 and cpuinfo - Add related hwcap test - Handle the trap of unsupported memory (normal/uncacheable) access in a VM A real scenario for this feature is that the userspace driver can make use of this to implement direct WQE (workqueue entry) - a mechanism to fill WQE directly into the hardware. Picked Marc's 2 patches form [1] for handling the LS64 trap in a VM on emulated MMIO and the introduce of KVM_EXIT_ARM_LDST64B. [1] https://lore.kernel.org/linux-arm-kernel/20240815125959.2097734-1-maz@kerne… Tested with updated hwcap test: [root@localhost tmp]# dmesg | grep "All CPU(s) started" [ 14.789859] CPU: All CPU(s) started at EL2 [root@localhost tmp]# ./hwcap # LS64 present ok 217 cpuinfo_match_LS64 ok 218 sigill_LS64 ok 219 # SKIP sigbus_LS64_V # LS64_V present ok 220 cpuinfo_match_LS64_V ok 221 sigill_LS64_V ok 222 # SKIP sigbus_LS64_V # 115 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # Totals: pass:107 fail:0 xfail:0 xpass:0 skip:115 error:0 root@localhost:/mnt# dmesg | grep "All CPU(s) started" [ 0.281152] CPU: All CPU(s) started at EL1 root@localhost:/mnt# ./hwcap # LS64 present ok 217 cpuinfo_match_LS64 ok 218 sigill_LS64 ok 219 # SKIP sigbus_LS64 # LS64_V present ok 220 cpuinfo_match_LS64_V ok 221 sigill_LS64_V ok 222 # SKIP sigbus_LS64_V # 115 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # Totals: pass:107 fail:0 xfail:0 xpass:0 skip:115 error:0 Change since v3: - Inject DABT fault for LS64 fault on unsupported memory but with valid memslot Link: https://lore.kernel.org/linux-arm-kernel/20250626080906.64230-1-yangyicong@… Change since v2: - Handle the LS64 fault to userspace and allow userspace to inject LS64 fault - Reorder the patches to make KVM handling prior to feature support Link: https://lore.kernel.org/linux-arm-kernel/20250331094320.35226-1-yangyicong@… Change since v1: - Drop the support for LS64_ACCDATA - handle the DABT of unsupported memory type after checking the memory attributes Link: https://lore.kernel.org/linux-arm-kernel/20241202135504.14252-1-yangyicong@… Marc Zyngier (2): KVM: arm64: Add exit to userspace on {LD,ST}64B* outside of memslots KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B Yicong Yang (5): KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1 arm64: Add support for FEAT_{LS64, LS64_V} KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest kselftest/arm64: Add HWCAP test for FEAT_{LS64, LS64_V} Documentation/arch/arm64/booting.rst | 12 +++ Documentation/arch/arm64/elf_hwcaps.rst | 6 ++ Documentation/virt/kvm/api.rst | 43 +++++++++-- arch/arm64/include/asm/el2_setup.h | 12 ++- arch/arm64/include/asm/esr.h | 8 ++ arch/arm64/include/asm/hwcap.h | 2 + arch/arm64/include/asm/kvm_emulate.h | 7 ++ arch/arm64/include/uapi/asm/hwcap.h | 2 + arch/arm64/kernel/cpufeature.c | 51 +++++++++++++ arch/arm64/kernel/cpuinfo.c | 2 + arch/arm64/kvm/inject_fault.c | 29 ++++++++ arch/arm64/kvm/mmio.c | 27 ++++++- arch/arm64/kvm/mmu.c | 14 +++- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/kvm.h | 3 +- tools/testing/selftests/arm64/abi/hwcap.c | 90 +++++++++++++++++++++++ 16 files changed, 299 insertions(+), 11 deletions(-) -- 2.24.0

1 week, 4 days

4
18
0 0

[PATCH bpf-next v3 00/14] selftests/bpf: Integrate test_xsk.c to test_progs framework

by Bastien Curutchet (eBPF Foundation)

Hi all, This is a second version of a series I sent some time ago, it continues the work of migrating the script tests into prog_tests. The test_xsk.sh script covers many AF_XDP use cases. The tests it runs are defined in xksxceiver.c. Since this script is used to test real hardware, the goal here is to leave it as it is, and only integrate the tests that run on veth peers into the test_progs framework. Some tests are flaky so they can't be integrated in the CI as they are. I think that fixing their flakyness would require a significant amount of work. So, as first step, I've excluded them from the list of tests migrated to the CI (see PATCH 13). If these tests get fixed at some point, integrating them into the CI will be straightforward. PATCH 1 extracts test_xsk[.c/.h] from xskxceiver[.c/.h] to make the tests available to test_progs. PATCH 2 to 5 fix small issues in the current test PATCH 7 to 12 handle all errors to release resources instead of calling exit() when any error occurs. PATCH 13 isolates some flaky tests PATCH 14 integrate the non-flaky tests to the test_progs framework Maciej, I've fixed the bug you found in the initial series. I've looked for any hardware able to run test_xsk.sh in my office, but I couldn't find one ... So here again, only the veth part has been tested, sorry about that. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Changes in v3: - Rebase on latest bpf-next_base to integrate commit c9110e6f7237 ("selftests/bpf: Fix count write in testapp_xdp_metadata_copy()"). - Move XDP_METADATA_COPY_* tests from flaky-tests to nominal tests - Link to v2: https://lore.kernel.org/r/20250902-xsk-v2-0-17c6345d5215@bootlin.com Changes in v2: - Rebase on the latest bpf-next_base and integrate the newly added tests to the work (adjust_tail* and tx_queue_consumer tests) - Re-order patches to split xkxceiver sooner. - Fix the bug reported by Maciej. - Fix verbose mode in test_xsk.sh by keeping kselftest (remove PATCH 1, 7 and 8) - Link to v1: https://lore.kernel.org/r/20250313-xsk-v1-0-7374729a93b9@bootlin.com --- Bastien Curutchet (eBPF Foundation) (14): selftests/bpf: test_xsk: Split xskxceiver selftests/bpf: test_xsk: Initialize bitmap before use selftests/bpf: test_xsk: Fix memory leaks selftests/bpf: test_xsk: Wrap test clean-up in functions selftests/bpf: test_xsk: Release resources when swap fails selftests/bpf: test_xsk: Add return value to init_iface() selftests/bpf: test_xsk: Don't exit immediately when xsk_attach fails selftests/bpf: test_xsk: Don't exit immediately when gettimeofday fails selftests/bpf: test_xsk: Don't exit immediately when workers fail selftests/bpf: test_xsk: Don't exit immediately if validate_traffic fails selftests/bpf: test_xsk: Don't exit immediately on allocation failures selftests/bpf: test_xsk: Move exit_with_error to xskxceiver.c selftests/bpf: test_xsk: Isolate flaky tests selftests/bpf: test_xsk: Integrate test_xsk.c to test_progs framework tools/testing/selftests/bpf/Makefile | 11 +- tools/testing/selftests/bpf/prog_tests/test_xsk.c | 2604 ++++++++++++++++++++ tools/testing/selftests/bpf/prog_tests/test_xsk.h | 294 +++ tools/testing/selftests/bpf/prog_tests/xsk.c | 146 ++ tools/testing/selftests/bpf/xskxceiver.c | 2685 +-------------------- tools/testing/selftests/bpf/xskxceiver.h | 156 -- 6 files changed, 3170 insertions(+), 2726 deletions(-) --- base-commit: e4e08c130231eb8071153ab5f056874d8f70430b change-id: 20250218-xsk-0cf90e975d14 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

1 week, 4 days

4
25
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025