- Linux-kselftest-mirror - lists.linaro.org

Re: [PATCH net-next v1 1/1] net: bridge: ensure that link-local traffic cannot unlock a locked port

by Ido Schimmel

On Thu, Jun 30, 2022 at 01:16:34PM +0200, Hans Schultz wrote: > This patch is related to the patch set > "Add support for locked bridge ports (for 802.1X)" > Link: https://lore.kernel.org/netdev/20220223101650.1212814-1-schultz.hans+netdev… > > This patch makes the locked port feature work with learning turned on, > which is enabled with the command: > > bridge link set dev DEV learning on > > Without this patch, link local traffic (01:80:c2) like EAPOL packets will > create a fdb entry when ingressing on a locked port with learning turned > on, thus unintentionally opening up the port for traffic for the said MAC. > > Some switchcore features like Mac-Auth and refreshing of FDB entries, > require learning enables on some switchcores, f.ex. the mv88e6xxx family. > Other features may apply too. > > Since many switchcores trap or mirror various multicast packets to the > CPU, link local traffic will unintentionally unlock the port for the > SA mac in question unless prevented by this patch. Why not just teach hostapd to do: echo 1 > /sys/class/net/br0/bridge/no_linklocal_learn ?

2 years, 11 months

3
21
0 0

[PATCH] drm/tests: Split up test cases in igt_check_drm_format_min_pitch

by Maíra Canal

The igt_check_drm_format_min_pitch() function had a lot of KUNIT_EXPECT_* calls, all of which ended up allocating and initializing various test assertion structures on the stack. This behavior was producing -Wframe-larger-than warnings on PowerPC, i386, and MIPS architectures, such as: drivers/gpu/drm/tests/drm_format_test.c: In function 'igt_check_drm_format_min_pitch': drivers/gpu/drm/tests/drm_format_test.c:271:1: error: the frame size of 3712 bytes is larger than 2048 bytes So, the igt_check_drm_format_min_pitch() test case was split into three smaller functions: one testing single plane formats, one testing multiple planes formats, and the other testing tiled formats. Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Maíra Canal <mairacanal(a)riseup.net> --- drivers/gpu/drm/tests/drm_format_test.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/tests/drm_format_test.c b/drivers/gpu/drm/tests/drm_format_test.c index 056cb8599d6d..28f2b8f88818 100644 --- a/drivers/gpu/drm/tests/drm_format_test.c +++ b/drivers/gpu/drm/tests/drm_format_test.c @@ -91,7 +91,7 @@ static void igt_check_drm_format_block_height(struct kunit *test) KUNIT_EXPECT_FALSE(test, drm_format_info_block_height(info, -1)); } -static void igt_check_drm_format_min_pitch(struct kunit *test) +static void igt_check_drm_format_min_pitch_for_single_plane(struct kunit *test) { const struct drm_format_info *info = NULL; @@ -175,6 +175,11 @@ static void igt_check_drm_format_min_pitch(struct kunit *test) (uint64_t)UINT_MAX * 4); KUNIT_EXPECT_EQ(test, drm_format_info_min_pitch(info, 0, (UINT_MAX - 1)), (uint64_t)(UINT_MAX - 1) * 4); +} + +static void igt_check_drm_format_min_pitch_for_multiple_planes(struct kunit *test) +{ + const struct drm_format_info *info = NULL; /* Test 2 planes format */ info = drm_format_info(DRM_FORMAT_NV12); @@ -249,6 +254,11 @@ static void igt_check_drm_format_min_pitch(struct kunit *test) (uint64_t)(UINT_MAX - 1) / 2); KUNIT_EXPECT_EQ(test, drm_format_info_min_pitch(info, 2, (UINT_MAX - 1) / 2), (uint64_t)(UINT_MAX - 1) / 2); +} + +static void igt_check_drm_format_min_pitch_for_tiled_format(struct kunit *test) +{ + const struct drm_format_info *info = NULL; /* Test tiled format */ info = drm_format_info(DRM_FORMAT_X0L2); @@ -273,7 +283,9 @@ static void igt_check_drm_format_min_pitch(struct kunit *test) static struct kunit_case drm_format_tests[] = { KUNIT_CASE(igt_check_drm_format_block_width), KUNIT_CASE(igt_check_drm_format_block_height), - KUNIT_CASE(igt_check_drm_format_min_pitch), + KUNIT_CASE(igt_check_drm_format_min_pitch_for_single_plane), + KUNIT_CASE(igt_check_drm_format_min_pitch_for_multiple_planes), + KUNIT_CASE(igt_check_drm_format_min_pitch_for_tiled_format), { } }; -- 2.36.1

2 years, 11 months

4
4
0 0

[PATCH] selftests/sgx: Ignore OpenSSL 3.0 deprecated functions warning

by Kristen Carlson Accardi

OpenSSL 3.0 deprecates some of the functions used in the SGX selftests, causing build errors on new distros. For now ignore the warnings until support for the functions is no longer available. Signed-off-by: Kristen Carlson Accardi <kristen(a)linux.intel.com> --- tools/testing/selftests/sgx/sigstruct.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/sgx/sigstruct.c b/tools/testing/selftests/sgx/sigstruct.c index 50c5ab1aa6fa..bb191b70141a 100644 --- a/tools/testing/selftests/sgx/sigstruct.c +++ b/tools/testing/selftests/sgx/sigstruct.c @@ -17,6 +17,9 @@ #include "defines.h" #include "main.h" +/* OpenSSL 3.0 has deprecated some functions. For now just ignore the warnings. */ +#pragma GCC diagnostic ignored "-Wdeprecated-declarations" + struct q1q2_ctx { BN_CTX *bn_ctx; BIGNUM *m; -- 2.36.1

2 years, 11 months

3
4
0 0

[PATCH] selftests: net: fix IOAM test skip return code

by Kleber Sacilotto de Souza

The ioam6.sh test script exits with an error code (1) when tests are skipped due to lack of support from userspace/kernel or not enough permissions. It should return the kselftests SKIP code instead. Signed-off-by: Kleber Sacilotto de Souza <kleber.souza(a)canonical.com> --- tools/testing/selftests/net/ioam6.sh | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/net/ioam6.sh b/tools/testing/selftests/net/ioam6.sh index a2b9fad5a9a6..4ceb401da1bf 100755 --- a/tools/testing/selftests/net/ioam6.sh +++ b/tools/testing/selftests/net/ioam6.sh @@ -117,6 +117,8 @@ # | Schema Data | | # +-----------------------------------------------------------+ +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 ################################################################################ # # @@ -211,7 +213,7 @@ check_kernel_compatibility() echo "SKIP: kernel version probably too old, missing ioam support" ip link del veth0 2>/dev/null || true ip netns del ioam-tmp-node || true - exit 1 + exit $ksft_skip fi ip -netns ioam-tmp-node route add db02::/64 encap ioam6 mode inline \ @@ -227,7 +229,7 @@ check_kernel_compatibility() "without CONFIG_IPV6_IOAM6_LWTUNNEL?" ip link del veth0 2>/dev/null || true ip netns del ioam-tmp-node || true - exit 1 + exit $ksft_skip fi ip link del veth0 2>/dev/null || true @@ -752,20 +754,20 @@ nfailed=0 if [ "$(id -u)" -ne 0 ] then echo "SKIP: Need root privileges" - exit 1 + exit $ksft_skip fi if [ ! -x "$(command -v ip)" ] then echo "SKIP: Could not run test without ip tool" - exit 1 + exit $ksft_skip fi ip ioam &>/dev/null if [ $? = 1 ] then echo "SKIP: iproute2 too old, missing ioam command" - exit 1 + exit $ksft_skip fi check_kernel_compatibility -- 2.34.1

2 years, 11 months

3
2
0 0

[PATCH v6 00/26] tcp: Initial support for RFC5925 auth option

by Leonard Crestez

This is similar to TCP-MD5 in functionality but it's sufficiently different that packet formats and interfaces are incompatible. Compared to TCP-MD5 more algorithms are supported and multiple keys can be used on the same connection but there is still no negotiation mechanism. Expected use-case is protecting long-duration BGP/LDP connections between routers using pre-shared keys. The goal of this series is to allow routers using the Linux TCP stack to interoperate with vendors such as Cisco and Juniper. The current code is largely feature complete and well-tested and changes are relatively small compared to previous version. I should have reposted this series earlier but was distracted by other things. I'd welcome any advice for how to push this upstream. Only up to patch 13 is required for a minimal implementation, the rest are additional features and tests. Maybe I could try posting reduced versions? I've recently been talking with Phillip Paeps who is working on an BSD implementation of the same standard and he suggested sharing ABI in order to make userspace compatibility easier. The current ABI is entirely made up by me alone. One option would be to use PF_KEY because in FreeBSD PF_KEY is also used for MD5, in a somewhat convoluted way. I'm not very familiar with PF_KEY but perhaps a shim could be implemented inside linux PF_KEY support to make some keys be handled in an entirely different way, using tcp_authopt instead of xfrm. Does this make sense to anyone else? A key difference versus MD5 is that keys are global rather than per-socket. Older versions had per-socket keys but in practice applications want to always use a consistent set of keys for communication with a specific peer and keeping those keys in sync from userspace is difficult and prone to races. Other vendors supporting TCP-AO implement a notion of a "key chain" roughly similar to what is described in RFC8177. The current ABI is sufficient to do the same but it requires a bunch of userspace work to add and delete keys at the appropriate time or mark them as "NOSEND" and "NORECV". Userspace also has to insert a "dummy" key when all other keys are expired in order to prevent unsigned traffic going through. This feature might be considerably easier to use from userspace if validity times were added in the kernel for each key. Here are some known flaws and limitations: * Crypto API is used with buffers on the stack and inside struct sock, this might not work on all arches. I'm currently only testing x64 VMs * Interaction with FASTOPEN not tested and unlikely to work because sequence number assumptions for syn/ack. * No way to limit keys on a per-port basis (used to be implicit with per-socket keys). * Not clear if crypto_ahash_setkey might sleep. If some implementation do that then maybe they could be excluded through alloc flags. * Traffic key is not cached (reducing performance) * No caching or hashing for key lookups so this will scale poorly with many keys * Overlaping MKTs can be configured despite what RFC5925 says * Current key can be deleted. RFC says this shouldn't be allowed but enforcing this belongs at an admin shell rather than in the kernel. * If multiple keys are valid for a destination the kernel picks one in an unpredictable manner (this can be overridden). There is relatively little code sharing with the TCP_MD5SIG feature and earlier versions shared even less. Unlike MD5 the AO feature is kept separate from the rest of the TCP code and reusing code would require many unrelated cleanup changes. I'm not convinced that "authopt" is particularly good naming convention, this name is a personal invention that does not appear anywhere else. The RFC calls this "tcp-ao". Perhaps TCP_AOSIG would be a better name and it would also make the close connection to TCP_MD5SIG more visible? Some testing support is included in nettest and fcnal-test.sh, similar to the current level of tcp-md5 testing. A more elaborate test suite using pytest and scapy is available out of tree: https://github.com/cdleonard/tcp-authopt-test There is an automatic system that runs that test suite in vagrant in gitlab-ci: https://gitlab.com/cdleonard/vagrantcpao Changes for frr (obsolete): https://github.com/FRRouting/frr/pull/9442 That PR was made early for ABI feedback, it has many issues. Changes for yabgp (obsolete): https://github.com/cdleonard/yabgp/commits/tcp_authopt This was used for interoperability testing with cisco. Changes since PATCH v5: * Rebased on recent net-next, including recent changes refactoring md5 * Use to skb_drop_reason * Fix using sock_kmalloc for key alloc but regular kfree for free. Use kmalloc because keys are global * Fix mentioning non-existent copy_from_sockopt in doc for _copy_from_sockptr_tolerant * If no valid keys are available for a destination then report a socket error instead of sending unsigned traffic * Remove several noop implementations which are always called from ifdef * Fix build issues in all scenarios, including -Werror at every point. * Split "tcp: Refactor tcp_inbound_md5_hash into tcp_inbound_sig_hash" into a separate commit. * Add TCP_AUTHOPT_FLAG_ACTIVE to distinguish between "keys configured for socket" and "connection authenticated". A listen socket with authentication enabled will return other sockets with authentication enabled on accept() but if no key is configured for the peer then authentication will be inactive. * Add support for TCP_REPAIR_AUTHOPT new sockopts which loads/saves the AO-specific information. Link: https://lore.kernel.org/netdev/cover.1643026076.git.cdleonard@gmail.com/ Changes since PATCH v4: * Move the traffic_key context_bytes header to stack. If it's a constant string then ahash can fail unexpectedly. * Fix allowing unsigned traffic if all keys are marked norecv. * Fix crashing in __tcp_authopt_alg_init on failure. * Try to respect the rnextkeyid from SYN on SYNACK (new patch) * Fix incorrect check for TCP_AUTHOPT_KEY_DEL in __tcp_authopt_select_key * Improve docs on __tcp_authopt_select_key * Fix build with CONFIG_PROC_FS=n (kernel build robot) * Fix build with CONFIG_IPV6=n (kernel build robot) Link: https://lore.kernel.org/netdev/cover.1640273966.git.cdleonard@gmail.com/ Changes since PATCH v3: * Made keys global (per-netns rather than per-sock). * Add /proc/net/tcp_authopt with a table of keys (not sockets). * Fix part of the shash/ahash conversion having slipped from patch 3 to patch 5 * Fix tcp_parse_sig_options assigning NULL incorrectly when both MD5 and AO are disabled (kernel build robot) * Fix sparse endianness warnings in prefix match (kernel build robot) * Fix several incorrect RCU annotations reported by sparse (kernel build robot) Link: https://lore.kernel.org/netdev/cover.1638962992.git.cdleonard@gmail.com/ Changes since PATCH v2: * Protect tcp_authopt_alg_get/put_tfm with local_bh_disable instead of preempt_disable. This caused signature corruption when send path executing with BH enabled was interrupted by recv. * Fix accepted keyids not configured locally as "unexpected". If any key is configured that matches the peer then traffic MUST be signed. * Fix issues related to sne rollover during handshake itself. (Francesco) * Implement and test prefixlen (David) * Replace shash with ahash and reuse some of the MD5 code (Dmitry) * Parse md5+ao options only once in the same function (Dmitry) * Pass tcp_authopt_info into inbound check path, this avoids second rcu dereference for same packet. * Pass tcp_request_socket into inbound check path instead of just listen socket. This is required for SNE rollover during handshake and clearifies ISN handling. * Do not allow disabling via sysctl after enabling once, this is difficult to support well (David) * Verbose check for sysctl_tcp_authopt (Dmitry) * Use netif_index_is_l3_master (David) * Cleanup ipvx_addr_match (David) * Add a #define tcp_authopt_needed to wrap static key usage because it looks nicer. * Replace rcu_read_lock with rcu_dereference_protected in SNE updates (Eric) * Remove test suite Link: https://lore.kernel.org/netdev/cover.1635784253.git.cdleonard@gmail.com/ Changes since PATCH v1: * Implement Sequence Number Extension * Implement l3index for vrf: TCP_AUTHOPT_KEY_IFINDEX as equivalent of TCP_MD5SIG_FLAG_IFINDEX * Expand TCP-AO tests in fcnal-test.sh to near-parity with md5. * Show addr/port on failure similar to md5 * Remove tox dependency from test suite (create venv directly) * Switch default pytest output format to TAP (kselftest standard) * Fix _copy_from_sockptr_tolerant stack corruption on short sockopts. This was covered in test but error was invisible without STACKPROTECTOR=y * Fix sysctl_tcp_authopt check in tcp_get_authopt_val before memset. This was harmless because error code is checked in getsockopt anyway. * Fix dropping md5 packets on all sockets with AO enabled * Fix checking (key->recv_id & TCP_AUTHOPT_KEY_ADDR_BIND) instead of key->flags in tcp_authopt_key_match_exact * Fix PATCH 1/19 not compiling due to missing "int err" declaration * Add ratelimited message for AO and MD5 both present * Export all symbols required by CONFIG_IPV6=m (again) * Fix compilation with CONFIG_TCP_AUTHOPT=y CONFIG_TCP_MD5SIG=n * Fix checkpatch issues * Pass -rrequirements.txt to tox to avoid dependency variation. Link: https://lore.kernel.org/netdev/cover.1632240523.git.cdleonard@gmail.com/ Changes since RFCv3: * Implement TCP_AUTHOPT handling for timewait and reset replies. Write tests to execute these paths by injecting packets with scapy * Handle combining md5 and authopt: if both are configured use authopt. * Fix locking issues around send_key, introduced in on of the later patches. * Handle IPv4-mapped-IPv6 addresses: it used to be that an ipv4 SYN sent to an ipv6 socket with TCP-AO triggered WARN * Implement un-namespaced sysctl disabled this feature by default * Allocate new key before removing any old one in setsockopt (Dmitry) * Remove tcp_authopt_key_info.local_id because it's no longer used (Dmitry) * Propagate errors from TCP_AUTHOPT getsockopt (Dmitry) * Fix no-longer-correct TCP_AUTHOPT_KEY_DEL docs (Dmitry) * Simplify crypto allocation (Eric) * Use kzmalloc instead of __GFP_ZERO (Eric) * Add static_key_false tcp_authopt_needed (Eric) * Clear authopt_info copied from oldsk in __tcp_authopt_openreq (Eric) * Replace memcmp in ipv4 and ipv6 addr comparisons (Eric) * Export symbols for CONFIG_IPV6=m (kernel test robot) * Mark more functions static (kernel test robot) * Fix build with CONFIG_PROVE_RCU_LIST=y (kernel test robot) Link: https://lore.kernel.org/netdev/cover.1629840814.git.cdleonard@gmail.com/ Changes since RFCv2: * Removed local_id from ABI and match on send_id/recv_id/addr * Add all relevant out-of-tree tests to tools/testing/selftests * Return an error instead of ignoring unknown flags, hopefully this makes it easier to extend. * Check sk_family before __tcp_authopt_info_get_or_create in tcp_set_authopt_key * Use sock_owned_by_me instead of WARN_ON(!lockdep_sock_is_held(sk)) * Fix some intermediate build failures reported by kbuild robot * Improve documentation Link: https://lore.kernel.org/netdev/cover.1628544649.git.cdleonard@gmail.com/ Changes since RFC: * Split into per-topic commits for ease of review. The intermediate commits compile with a few "unused function" warnings and don't do anything useful by themselves. * Add ABI documention including kernel-doc on uapi * Fix lockdep warnings from crypto by creating pools with one shash for each cpu * Accept short options to setsockopt by padding with zeros; this approach allows increasing the size of the structs in the future. * Support for aes-128-cmac-96 * Support for binding addresses to keys in a way similar to old tcp_md5 * Add support for retrieving received keyid/rnextkeyid and controling the keyid/rnextkeyid being sent. Link: https://lore.kernel.org/netdev/01383a8751e97ef826ef2adf93bfde3a08195a43.162… Leonard Crestez (26): tcp: authopt: Initial support and key management tcp: authopt: Remove more unused noops docs: Add user documentation for tcp_authopt tcp: authopt: Add crypto initialization tcp: Refactor tcp_sig_hash_skb_data for AO tcp: authopt: Compute packet signatures tcp: Refactor tcp_inbound_md5_hash into tcp_inbound_sig_hash tcp: authopt: Hook into tcp core tcp: authopt: Disable via sysctl by default tcp: authopt: Implement Sequence Number Extension tcp: ipv6: Add AO signing for tcp_v6_send_response tcp: authopt: Add support for signing skb-less replies tcp: ipv4: Add AO signing for skb-less replies tcp: authopt: Add key selection controls tcp: authopt: Add initial l3index support tcp: authopt: Add NOSEND/NORECV flags tcp: authopt: Add prefixlen support tcp: authopt: Add /proc/net/tcp_authopt listing all keys selftests: nettest: Rename md5_prefix to key_addr_prefix selftests: nettest: Initial tcp_authopt support selftests: net/fcnal: Initial tcp_authopt support tcp: authopt: Try to respect rnextkeyid from SYN on SYNACK tcp: authopt: tcp_authopt_lookup_send: Add anykey output param tcp: authopt: Initial support for TCP_AUTHOPT_FLAG_ACTIVE tcp: authopt: If no keys are valid for send report an error tcp: authopt: Initial implementation of TCP_REPAIR_AUTHOPT Documentation/networking/index.rst | 1 + Documentation/networking/ip-sysctl.rst | 6 + Documentation/networking/tcp_authopt.rst | 88 + include/linux/tcp.h | 15 + include/net/dropreason.h | 16 + include/net/net_namespace.h | 4 + include/net/netns/tcp_authopt.h | 12 + include/net/tcp.h | 55 +- include/net/tcp_authopt.h | 264 +++ include/uapi/linux/snmp.h | 1 + include/uapi/linux/tcp.h | 165 ++ net/ipv4/Kconfig | 14 + net/ipv4/Makefile | 1 + net/ipv4/proc.c | 1 + net/ipv4/sysctl_net_ipv4.c | 39 + net/ipv4/tcp.c | 126 +- net/ipv4/tcp_authopt.c | 1952 +++++++++++++++++++++ net/ipv4/tcp_input.c | 53 +- net/ipv4/tcp_ipv4.c | 100 +- net/ipv4/tcp_minisocks.c | 12 + net/ipv4/tcp_output.c | 106 +- net/ipv6/tcp_ipv6.c | 70 +- tools/testing/selftests/net/fcnal-test.sh | 329 +++- tools/testing/selftests/net/nettest.c | 204 ++- 24 files changed, 3546 insertions(+), 88 deletions(-) create mode 100644 Documentation/networking/tcp_authopt.rst create mode 100644 include/net/netns/tcp_authopt.h create mode 100644 include/net/tcp_authopt.h create mode 100644 net/ipv4/tcp_authopt.c -- 2.25.1

2 years, 11 months

3
32
0 0

[PATCH] clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig

by Daniel Latypov

CONFIG_UML_PCI_OVER_VIRTIO=y is needed to enable CONFIG_PCI=y on UML. However, this causes test failures when running the clk tests, i.e. $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/clk A snippet of the particular error is: > ok 1 - clk_gate_test_parent_rate > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 45 at lib/logic_iomem.c:141 __raw_readl+0x9f/0xd0 This is triggered by this cast in the test: 143 ctx->fake_mem = (void __force __iomem *)&ctx->fake_reg; this seems to work except when logic iomem is enabled, i.e. CONFIG_INDIRECT_IOMEM=y. As a short-term fix, explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in drivers/clk/.kunitconfig so we can enable it for everyone else by default in kunit.py. The long-term fix probably requires something more complicated, like #ifdef CONFIG_INDIRECT_IOMEM logic_iomem_add_region(...); #endif Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reported-by: Maxime Ripard <maxime(a)cerno.tech> Tested-by: Maxime Ripard <maxime(a)cerno.tech> --- Note: this targeting the -kselftest kunit branch. There's a commit that triggers this by enabling logic iomem by default [1] and there's also a commit that lets disable it via kunitconfig file [2], which this fix relies on. [1] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/c… [2] https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git/c… --- drivers/clk/.kunitconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/.kunitconfig b/drivers/clk/.kunitconfig index cdbc7d7deba9..2fbeb71316f8 100644 --- a/drivers/clk/.kunitconfig +++ b/drivers/clk/.kunitconfig @@ -2,3 +2,4 @@ CONFIG_KUNIT=y CONFIG_COMMON_CLK=y CONFIG_CLK_KUNIT_TEST=y CONFIG_CLK_GATE_KUNIT_TEST=y +CONFIG_UML_PCI_OVER_VIRTIO=n base-commit: 7635778bac7e46458392c1261e3916e8e9e86860 -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

4
8
0 0

[PATCH] selftests: net: Fix typo 'the the' in comment

by Slark Xiao

Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao(a)163.com> --- tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh index 0727e2012b68..43469c7de118 100755 --- a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh +++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh @@ -525,7 +525,7 @@ arp_suppression() log_test "neigh_suppress: on / neigh exists: yes" - # Delete the neighbour from the the SVI. A single ARP request should be + # Delete the neighbour from the SVI. A single ARP request should be # received by the remote VTEP RET=0 -- 2.25.1

2 years, 11 months

2
1
0 0

[PATCH net-next 1/4] selftests: tls: handful of memrnd() and length checks

by Jakub Kicinski

Add a handful of memory randomizations and precise length checks. Nothing is really broken here, I did this to increase confidence when debugging. It does fix a GCC warning, tho. Apparently GCC recognizes that memory needs to be initialized for send() but does not recognize that for write(). Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/tls.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 4ecbac197c46..2cbb12736596 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -644,12 +644,14 @@ TEST_F(tls, splice_from_pipe2) int p2[2]; int p[2]; + memrnd(mem_send, sizeof(mem_send)); + ASSERT_GE(pipe(p), 0); ASSERT_GE(pipe(p2), 0); - EXPECT_GE(write(p[1], mem_send, 8000), 0); - EXPECT_GE(splice(p[0], NULL, self->fd, NULL, 8000, 0), 0); - EXPECT_GE(write(p2[1], mem_send + 8000, 8000), 0); - EXPECT_GE(splice(p2[0], NULL, self->fd, NULL, 8000, 0), 0); + EXPECT_EQ(write(p[1], mem_send, 8000), 8000); + EXPECT_EQ(splice(p[0], NULL, self->fd, NULL, 8000, 0), 8000); + EXPECT_EQ(write(p2[1], mem_send + 8000, 8000), 8000); + EXPECT_EQ(splice(p2[0], NULL, self->fd, NULL, 8000, 0), 8000); EXPECT_EQ(recv(self->cfd, mem_recv, send_len, MSG_WAITALL), send_len); EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0); } @@ -683,10 +685,12 @@ TEST_F(tls, splice_to_pipe) char mem_recv[TLS_PAYLOAD_MAX_LEN]; int p[2]; + memrnd(mem_send, sizeof(mem_send)); + ASSERT_GE(pipe(p), 0); - EXPECT_GE(send(self->fd, mem_send, send_len, 0), 0); - EXPECT_GE(splice(self->cfd, NULL, p[1], NULL, send_len, 0), 0); - EXPECT_GE(read(p[0], mem_recv, send_len), 0); + EXPECT_EQ(send(self->fd, mem_send, send_len, 0), send_len); + EXPECT_EQ(splice(self->cfd, NULL, p[1], NULL, send_len, 0), send_len); + EXPECT_EQ(read(p[0], mem_recv, send_len), send_len); EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0); } @@ -875,6 +879,8 @@ TEST_F(tls, multiple_send_single_recv) char recv_mem[2 * 10]; char send_mem[10]; + memrnd(send_mem, sizeof(send_mem)); + EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0); EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0); memset(recv_mem, 0, total_len); @@ -891,6 +897,8 @@ TEST_F(tls, single_send_multiple_recv_non_align) char recv_mem[recv_len * 2]; char send_mem[total_len]; + memrnd(send_mem, sizeof(send_mem)); + EXPECT_GE(send(self->fd, send_mem, total_len, 0), 0); memset(recv_mem, 0, total_len); @@ -936,10 +944,10 @@ TEST_F(tls, recv_peek) char buf[15]; EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); - EXPECT_NE(recv(self->cfd, buf, send_len, MSG_PEEK), -1); + EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_PEEK), send_len); EXPECT_EQ(memcmp(test_str, buf, send_len), 0); memset(buf, 0, sizeof(buf)); - EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1); + EXPECT_EQ(recv(self->cfd, buf, send_len, 0), send_len); EXPECT_EQ(memcmp(test_str, buf, send_len), 0); } -- 2.37.1

2 years, 11 months

1
0
0 0

[PATCH] Makefile: replace headers_install with headers for kselftest

by Guillaume Tucker

Replace headers_install with headers as kselftest uses the header files from within the kernel tree rather than from a system-wide installation. We can still run this directly: $ make O=build kselftest-all and when building from the selftests directory: $ make O=build headers $ make O=build -C tools/testing/selftests all Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> Reported-by: Masahiro Yamada <masahiroy(a)kernel.org> --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index fb2f3bb53a6b..5c934d16664c 100644 --- a/Makefile +++ b/Makefile @@ -1347,10 +1347,10 @@ tools/%: FORCE # Kernel selftest PHONY += kselftest -kselftest: headers_install +kselftest: headers $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests -kselftest-%: headers_install FORCE +kselftest-%: headers FORCE $(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $* PHONY += kselftest-merge -- 2.30.2

2 years, 11 months

3
5
0 0

[PATCH] testing: kselftest_harness: add filtering and enumerating tests

by Jakub Kicinski

As the number of test cases and length of execution grows it's useful to select only a subset of tests. In TLS for instance we have a matrix of variants for different crypto protocols and during development mostly care about testing a handful. This is quicker and makes reading output easier. This patch adds argument parsing to kselftest_harness. It supports a couple of ways to filter things, I could not come up with one way which will cover all cases. The first and simplest switch is -r which takes the name of a test to run (can be specified multiple times). For example: $ ./my_test -r some.test.name -r some.other.name will run tests some.test.name and some.other.name (where "some" is the fixture, "test" and "other" and "name is the test.) Then there is a handful of group filtering options. f/v/t for filtering by fixture/variant/test. They have both positive (match -> run) and negative versions (match -> skip). If user specifies any positive option we assume the default is not to run the tests. If only negative options are set we assume the tests are supposed to be run by default. Usage: ./tools/testing/selftests/net/tls [-h|-l] [-t|-T|-v|-V|-f|-F|-r name] -h print help -l list all tests -t name include test -T name exclude test -v name include variant -V name exclude variant -f name include fixture -F name exclude fixture -r name run specified test Test filter options can be specified multiple times. The filtering stops at the first match. For example to include all tests from variant 'bla' but not test 'foo' specify '-T foo -v bla'. Here we can request for example all tests from fixture "foo" to run: ./my_test -f foo or to skip variants var1 and var2: ./my_test -V var1 -V var2 Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: - use getopt() CC: keescook(a)chromium.org CC: luto(a)amacapital.net CC: wad(a)chromium.org CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/kselftest_harness.h | 142 +++++++++++++++++++- 1 file changed, 137 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 25f4d54067c0..d8bff2005dfc 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -54,6 +54,7 @@ #define _GNU_SOURCE #endif #include <asm/types.h> +#include <ctype.h> #include <errno.h> #include <stdbool.h> #include <stdint.h> @@ -985,6 +986,127 @@ void __wait_for_test(struct __test_metadata *t) } } +static void test_harness_list_tests(void) +{ + struct __fixture_variant_metadata *v; + struct __fixture_metadata *f; + struct __test_metadata *t; + + for (f = __fixture_list; f; f = f->next) { + v = f->variant; + t = f->tests; + + if (f == __fixture_list) + fprintf(stderr, "%-20s %-25s %s\n", + "# FIXTURE", "VARIANT", "TEST"); + else + fprintf(stderr, "--------------------------------------------------------------------------------\n"); + + do { + fprintf(stderr, "%-20s %-25s %s\n", + t == f->tests ? f->name : "", + v ? v->name : "", + t ? t->name : ""); + + v = v ? v->next : NULL; + t = t ? t->next : NULL; + } while (v || t); + } +} + +static int test_harness_argv_check(int argc, char **argv) +{ + int opt; + + while ((opt = getopt(argc, argv, "hlF:f:V:v:t:T:r:")) != -1) { + switch (opt) { + case 'f': + case 'F': + case 'v': + case 'V': + case 't': + case 'T': + case 'r': + break; + case 'l': + test_harness_list_tests(); + return KSFT_SKIP; + case 'h': + default: + fprintf(stderr, + "Usage: %s [-h|-l] [-t|-T|-v|-V|-f|-F|-r name]\n" + "\t-h print help\n" + "\t-l list all tests\n" + "\n" + "\t-t name include test\n" + "\t-T name exclude test\n" + "\t-v name include variant\n" + "\t-V name exclude variant\n" + "\t-f name include fixture\n" + "\t-F name exclude fixture\n" + "\t-r name run specified test\n" + "\n" + "Test filter options can be specified " + "multiple times. The filtering stops\n" + "at the first match. For example to " + "include all tests from variant 'bla'\n" + "but not test 'foo' specify '-T foo -v bla'.\n" + "", argv[0]); + return opt == 'h' ? KSFT_SKIP : KSFT_FAIL; + } + } + + return KSFT_PASS; +} + +static bool test_enabled(int argc, char **argv, + struct __fixture_metadata *f, + struct __fixture_variant_metadata *v, + struct __test_metadata *t) +{ + unsigned int flen = 0, vlen = 0, tlen = 0; + bool has_positive = false; + int opt; + + optind = 1; + while ((opt = getopt(argc, argv, "F:f:V:v:t:T:r:")) != -1) { + has_positive |= islower(opt); + + switch (tolower(opt)) { + case 't': + if (!strcmp(t->name, optarg)) + return islower(opt); + break; + case 'f': + if (!strcmp(f->name, optarg)) + return islower(opt); + break; + case 'v': + if (!strcmp(v->name, optarg)) + return islower(opt); + break; + case 'r': + if (!tlen) { + flen = strlen(f->name); + vlen = strlen(v->name); + tlen = strlen(t->name); + } + if (strlen(optarg) == flen + 1 + vlen + !!vlen + tlen && + !strncmp(f->name, &optarg[0], flen) && + !strncmp(v->name, &optarg[flen + 1], vlen) && + !strncmp(t->name, &optarg[flen + 1 + vlen + !!vlen], tlen)) + return true; + break; + } + } + + /* + * If there are no positive tests then we assume user just wants + * exclusions and everything else is a pass. + */ + return !has_positive; +} + void __run_test(struct __fixture_metadata *f, struct __fixture_variant_metadata *variant, struct __test_metadata *t) @@ -1032,24 +1154,32 @@ void __run_test(struct __fixture_metadata *f, f->name, variant->name[0] ? "." : "", variant->name, t->name); } -static int test_harness_run(int __attribute__((unused)) argc, - char __attribute__((unused)) **argv) +static int test_harness_run(int argc, char **argv) { struct __fixture_variant_metadata no_variant = { .name = "", }; struct __fixture_variant_metadata *v; struct __fixture_metadata *f; struct __test_results *results; struct __test_metadata *t; - int ret = 0; + int ret; unsigned int case_count = 0, test_count = 0; unsigned int count = 0; unsigned int pass_count = 0; + ret = test_harness_argv_check(argc, argv); + if (ret != KSFT_PASS) + return ret; + for (f = __fixture_list; f; f = f->next) { for (v = f->variant ?: &no_variant; v; v = v->next) { - case_count++; + unsigned int old_tests = test_count; + for (t = f->tests; t; t = t->next) - test_count++; + if (test_enabled(argc, argv, f, v, t)) + test_count++; + + if (old_tests != test_count) + case_count++; } } @@ -1063,6 +1193,8 @@ static int test_harness_run(int __attribute__((unused)) argc, for (f = __fixture_list; f; f = f->next) { for (v = f->variant ?: &no_variant; v; v = v->next) { for (t = f->tests; t; t = t->next) { + if (!test_enabled(argc, argv, f, v, t)) + continue; count++; t->results = results; __run_test(f, v, t); -- 2.37.1

2 years, 11 months

1
0
0 0

[PATCH v3] selftests/vm: enable running select groups of tests

by Joel Savitz

Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems: First, our LTP tests overlap with the VM selftests. We want to avoid unhelpful redundancy in our testing practices. Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node. We want to be able to run the vm selftests suitable to particular hardware. Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems. Preserve existing default behavior of running all tests when the script is invoked with no arguments. Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes - pkey memory protection key tests example: ./run_vmtests.sh -t "hmm mmap ksm" Changes from v2: - rebase onto the mm-everyting branch in https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git - integrate this functionality with new the tests Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text Signed-off-by: Joel Savitz <jsavitz(a)redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 241 +++++++++++++++------- 1 file changed, 161 insertions(+), 80 deletions(-) diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index d84fe0fa15e1..fb72a1338d07 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,75 @@ ksft_skip=4 mnt=./huge exitcode=0 -#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +usage() { + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"] + -t: specify specific categories to tests to run + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +- pkey + memory protection key tests +example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF + exit 0 +} + + +while getopts "ht:" OPT; do + case ${OPT} in + "h") usage ;; + "t") TEST_ITEMS=${OPTARG} ;; + esac +done +shift $((OPTIND -1)) + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then # Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +88,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024)) -#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,144 +127,155 @@ else exit 1 fi -#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1 # Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + fi # test_selected } -mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi -run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall -run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb -run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap -run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap -run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test -echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi -run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace # get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000 -run_test ./userfaultfd anon 20 16 -run_test ./userfaultfd anon:dev 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon:dev 20 16 # Hugetlb tests require source and destination huge pages. Pass in half the # size ($half_ufd_size_MB), which is used for *each*. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 -run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb:dev "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb_shared:dev "$half_ufd_size_MB" 32 "$mnt"/uffd-test rm -f "$mnt"/uffd-test -run_test ./userfaultfd shmem 20 16 -run_test ./userfaultfd shmem:dev 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem:dev 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi -run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test -run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit -run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate -run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test -run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests -run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test -run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test -run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test - run_test ./va_128TBswitch.sh + CATEGORY="hugevm" run_test ./va_128TBswitch.sh fi # VADDR64 # vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke -run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap -run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate -run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret # KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0 # protection_keys tests if [ -x ./protection_keys_32 ] then - run_test ./protection_keys_32 + CATEGORY="pkey" run_test ./protection_keys_32 fi if [ -x ./protection_keys_64 ] then - run_test ./protection_keys_64 + CATEGORY="pkey" run_test ./protection_keys_64 fi exit $exitcode -- 2.31.1

2 years, 11 months

4
5
0 0

[PATCH] wireguard: selftests: update config fragments

by Lukas Bulwahn

The kernel.config and debug.config fragments in wireguard selftests mention some config symbols that have been reworked: Commit c5665868183f ("mm: kmemleak: use the memory pool for early allocations") removes the config DEBUG_KMEMLEAK_EARLY_LOG_SIZE and since then, the config's feature is available without further configuration. Commit 4675ff05de2d ("kmemcheck: rip it out") removes kmemcheck and the corresponding arch config HAVE_ARCH_KMEMCHECK. There is no need for this config. Commit 3bf195ae6037 ("netfilter: nat: merge nf_nat_ipv4,6 into nat core") removes the config NF_NAT_IPV4 and since then, the config's feature is available without further configuration. Commit 41a2901e7d22 ("rcu: Remove SPARSE_RCU_POINTER Kconfig option") removes the config SPARSE_RCU_POINTER and since then, the config's feature is enabled by default. Commit dfb4357da6dd ("time: Remove CONFIG_TIMER_STATS") removes the feature and config CONFIG_TIMER_STATS without any replacement. Commit 3ca17b1f3628 ("lib/ubsan: remove null-pointer checks") removes the check and config UBSAN_NULL without any replacement. Adjust the config fragments to those changes in configs. Signed-off-by: Lukas Bulwahn <lukas.bulwahn(a)gmail.com> --- tools/testing/selftests/wireguard/qemu/debug.config | 5 ----- tools/testing/selftests/wireguard/qemu/kernel.config | 1 - 2 files changed, 6 deletions(-) diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config index 2b321b8a96cf..9d172210e2c6 100644 --- a/tools/testing/selftests/wireguard/qemu/debug.config +++ b/tools/testing/selftests/wireguard/qemu/debug.config @@ -18,15 +18,12 @@ CONFIG_DEBUG_VM=y CONFIG_DEBUG_MEMORY_INIT=y CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_HAVE_ARCH_KASAN=y CONFIG_KASAN=y CONFIG_KASAN_INLINE=y CONFIG_UBSAN=y CONFIG_UBSAN_SANITIZE_ALL=y -CONFIG_UBSAN_NULL=y CONFIG_DEBUG_KMEMLEAK=y -CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=8192 CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_SHIRQ=y CONFIG_WQ_WATCHDOG=y @@ -35,7 +32,6 @@ CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y CONFIG_SCHED_STACK_END_CHECK=y CONFIG_DEBUG_TIMEKEEPING=y -CONFIG_TIMER_STATS=y CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y @@ -49,7 +45,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_PLIST=y CONFIG_PROVE_RCU=y -CONFIG_SPARSE_RCU_POINTER=y CONFIG_RCU_CPU_STALL_TIMEOUT=21 CONFIG_RCU_TRACE=y CONFIG_RCU_EQS_DEBUG=y diff --git a/tools/testing/selftests/wireguard/qemu/kernel.config b/tools/testing/selftests/wireguard/qemu/kernel.config index e1858ce7003f..ce2a04717300 100644 --- a/tools/testing/selftests/wireguard/qemu/kernel.config +++ b/tools/testing/selftests/wireguard/qemu/kernel.config @@ -19,7 +19,6 @@ CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_NAT=y CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MARK=y -CONFIG_NF_NAT_IPV4=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_MANGLE=y -- 2.17.1

2 years, 11 months

2
1
0 0

[PATCH v4] Documentation: kunit: Add CLI args for kunit_tool

by Sadiya Kazi

Some kunit_tool command line arguments are missing in run_wrapper.rst. Document them. Reported-by: Bagas Sanjaya <bagasdotme(a)gmail.com> Reported-by: kernel test robot <lkp(a)intel.com> Reviewed-by: David Gow <davidgow(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Maíra Canal <mairacanal(a)riseup.net> Signed-off-by: Sadiya Kazi <sadiyakazi(a)google.com> --- Changes since v3: https://lore.kernel.org/linux-kselftest/20220724184758.1723925-1-sadiyakazi… -Fixed the indention bug in the run_wrapper.rst file. Thanks for catching that(Kernel test robot, Bagas). -Updated the commit message. Changes since v2: https://lore.kernel.org/linux-kselftest/20220721081026.1247067-1-sadiyakazi… -Added a code block for —kconfig_add argument to make the styling consistent -Slightly changed the words for —arch argument -Changed QEMU to qemu wherever applicable for the cli args -Changed the style for ``-smp 8`` -Changed "Might be repeated" to "may be repeated” for kernel_args Changes since V1: https://lore.kernel.org/linux-kselftest/20220719092214.995965-1-sadiyakazi@… - Addressed most of the review comments from Maira and David, except removing the duplicate arguments as I felt its worth keeping them in the reference documentation as well as in context. We can improve them and differentiate their use cases in the future patches. --- Documentation/dev-tools/kunit/run_wrapper.rst | 63 ++++++++++++++++++- 1 file changed, 62 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 5e560f2c5fca..cce203138fb7 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -233,7 +233,7 @@ Command-Line Arguments ====================== kunit_tool has a number of other command-line arguments which can -be useful for our test environment. Below the most commonly used +be useful for our test environment. Below are the most commonly used command line arguments: - ``--help``: Lists all available options. To list common options, @@ -257,3 +257,64 @@ command line arguments: added or modified. Instead, enable all tests which have satisfied dependencies by adding ``CONFIG_KUNIT_ALL_TESTS=y`` to your ``.kunitconfig``. + +- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig`` + file. For example: + + - ``lib/kunit/.kunitconfig`` can be the path of the file. + + - ``lib/kunit`` can be the directory in which the file is located. + + This file is used to build and run with a predefined set of tests + and their dependencies. For example, to run tests for a given subsystem. + +- ``--kconfig_add``: Specifies additional configuration options to be + appended to the ``.kunitconfig`` file. For example: + + .. code-block:: + + ./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y + +- ``--arch``: Runs tests on the specified architecture. The architecture + argument is same as the Kbuild ARCH environment variable. + For example, i386, x86_64, arm, um, etc. Non-UML architectures run on qemu. + Default is `um`. + +- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the + same argument as passed to the ``CROSS_COMPILE`` variable used by + Kbuild. This will be the prefix for the toolchain + binaries such as GCC. For example: + + - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on + our system. + + - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` + if we have downloaded the microblaze toolchain from the 0-day + website to a specified path in our home directory called toolchains. + +- ``--qemu_config``: Specifies the path to a file containing a + custom qemu architecture definition. This should be a python file + containing a `QemuArchParams` object. + +- ``--qemu_args``: Specifies additional qemu arguments, for example, ``-smp 8``. + +- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously. + By default, this is set to the number of cores on your system. + +- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run. + This does not include the time taken to build the tests. + +- ``--kernel_args``: Specifies additional kernel command-line arguments. May be repeated. + +- ``--run_isolated``: If set, boots the kernel for each individual suite/test. + This is useful for debugging a non-hermetic test, one that + might pass/fail based on what ran before it. + +- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are: + + - ``all``: To view the full kernel output, use ``--raw_output=all``. + + - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``. + +- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or + saves to a file if a filename is specified. -- 2.37.1.359.gd136c6c3e2-goog

2 years, 11 months

2
1
0 0

[PATCH RESEND v2] Documentation: KUnit: Fix example with compilation error

by Maíra Canal

The Parameterized Testing example contains a compilation error, as the signature for the description helper function is void(*)(const struct sha1_test_case *, char *), and the struct is non-const. This is warned by Clang: error: initialization of ‘void (*)(struct sha1_test_case *, char *)’ from incompatible pointer type ‘void (*)(const struct sha1_test_case *, char *)’ [-Werror=incompatible-pointer-types] 33 | KUNIT_ARRAY_PARAM(sha1, cases, case_to_desc); | ^~~~~~~~~~~~ ../include/kunit/test.h:1339:70: note: in definition of macro ‘KUNIT_ARRAY_PARAM’ 1339 | void (*__get_desc)(typeof(__next), char *) = get_desc; \ Signed-off-by: Maíra Canal <mairacanal(a)riseup.net> --- v1 -> v2: https://lore.kernel.org/linux-kselftest/CABVgOSkFKJBNt-AsWmOh2Oni4QO2xdiXJi… - Instead of changing the function signature to non-const, makes the cases const (David Gow). --- Documentation/dev-tools/kunit/usage.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index d62a04255c2e..44158eecb51e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -505,7 +505,7 @@ By reusing the same ``cases`` array from above, we can write the test as a const char *str; const char *sha1; }; - struct sha1_test_case cases[] = { + const struct sha1_test_case cases[] = { { .str = "hello world", .sha1 = "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed", -- 2.36.1

2 years, 11 months

3
2
0 0

[PATCH v1] MAINTAINERS: kunit: Add David Gow as a maintainer of KUnit

by Brendan Higgins

David has been a de facto maintainer of KUnit for a long time now. Formalize this in the MAINTAINERS file. Signed-off-by: Brendan Higgins <brendan.higgins(a)linux.dev> --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 64379c699903..782da36b524f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10890,6 +10890,7 @@ F: fs/smbfs_common/ KERNEL UNIT TESTING FRAMEWORK (KUnit) M: Brendan Higgins <brendanhiggins(a)google.com> +M: David Gow <davidgow(a)google.com> L: linux-kselftest(a)vger.kernel.org L: kunit-dev(a)googlegroups.com S: Maintained -- 2.37.1.359.gd136c6c3e2-goog

2 years, 11 months

2
1
0 0

[PATCH v1] mailmap: add linux.dev alias for Brendan Higgins

by Brendan Higgins

Because of my new work remote setup at Google, I can no longer use command line tools with my google.com email address, for this reason I got a linux.dev account. So update the mailmap to show the new alias I will be using. Signed-off-by: Brendan Higgins <brendan.higgins(a)linux.dev> --- .mailmap | 1 + 1 file changed, 1 insertion(+) diff --git a/.mailmap b/.mailmap index 13e4f504e17f..24aca1d3a5f1 100644 --- a/.mailmap +++ b/.mailmap @@ -74,6 +74,7 @@ Boris Brezillon <bbrezillon(a)kernel.org> <b.brezillon.dev(a)gmail.com> Boris Brezillon <bbrezillon(a)kernel.org> <b.brezillon(a)overkiz.com> Boris Brezillon <bbrezillon(a)kernel.org> <boris.brezillon(a)bootlin.com> Boris Brezillon <bbrezillon(a)kernel.org> <boris.brezillon(a)free-electrons.com> +Brendan Higgins <brendan.higgins(a)linux.dev> <brendanhiggins(a)google.com> Brian Avery <b.avery(a)hp.com> Brian King <brking(a)us.ibm.com> Brian Silverman <bsilver16384(a)gmail.com> <brian.silverman(a)bluerivertech.com> -- 2.37.1.359.gd136c6c3e2-goog

2 years, 11 months

2
1
0 0

[PATCH v3] Documentation: kunit: Add CLI args for kunit_tool

by Sadiya Kazi

Run_wrapper.rst was missing some command line arguments. Added additional args in the file. Signed-off-by: Sadiya Kazi <sadiyakazi(a)google.com> --- Changes since v2: https://lore.kernel.org/linux-kselftest/20220721081026.1247067-1-sadiyakazi… -Added a code block for —kconfig_add argument to make the styling consistent -Slightly changed the words for —arch argument -Changed QEMU to qemu wherever applicable for the cli args -Changed the style for ``-smp 8`` -Changed "Might be repeated" to "may be repeated” for kernel_args --- Documentation/dev-tools/kunit/run_wrapper.rst | 61 ++++++++++++++++++- 1 file changed, 60 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 5e560f2c5fca..ed3715fef32d 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -233,7 +233,7 @@ Command-Line Arguments ====================== kunit_tool has a number of other command-line arguments which can -be useful for our test environment. Below the most commonly used +be useful for our test environment. Below are the most commonly used command line arguments: - ``--help``: Lists all available options. To list common options, @@ -257,3 +257,62 @@ command line arguments: added or modified. Instead, enable all tests which have satisfied dependencies by adding ``CONFIG_KUNIT_ALL_TESTS=y`` to your ``.kunitconfig``. + +- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig`` + file. For example: + + - ``lib/kunit/.kunitconfig`` can be the path of the file. + + - ``lib/kunit`` can be the directory in which the file is located. + + This file is used to build and run with a predefined set of tests + and their dependencies. For example, to run tests for a given subsystem. + +- ``--kconfig_add``: Specifies additional configuration options to be + appended to the ``.kunitconfig`` file. For example: + .. code-block:: + ./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y + +- ``--arch``: Runs tests on the specified architecture. The architecture + argument is same as the Kbuild ARCH environment variable. + For example, i386, x86_64, arm, um, etc. Non-UML architectures run on qemu. + Default is `um`. + +- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the + same argument as passed to the ``CROSS_COMPILE`` variable used by + Kbuild. This will be the prefix for the toolchain + binaries such as GCC. For example: + + - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on + our system. + + - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` + if we have downloaded the microblaze toolchain from the 0-day + website to a specified path in our home directory called toolchains. + +- ``--qemu_config``: Specifies the path to a file containing a + custom qemu architecture definition. This should be a python file + containing a `QemuArchParams` object. + +- ``--qemu_args``: Specifies additional qemu arguments, for example, ``-smp 8``. + +- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously. + By default, this is set to the number of cores on your system. + +- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run. + This does not include the time taken to build the tests. + +- ``--kernel_args``: Specifies additional kernel command-line arguments. May be repeated. + +- ``--run_isolated``: If set, boots the kernel for each individual suite/test. + This is useful for debugging a non-hermetic test, one that + might pass/fail based on what ran before it. + +- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are: + + - ``all``: To view the full kernel output, use ``--raw_output=all``. + + - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``. + +- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or + saves to a file if a filename is specified. -- 2.37.1.359.gd136c6c3e2-goog

2 years, 11 months

4
3
0 0

[PATCH] selftests/core: Fix comment typo

by min tang

The double `and' is duplicated in line 479, remove one. Signed-off-by: min tang <tangmin(a)cdjrlc.com> --- tools/testing/selftests/core/close_range_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/core/close_range_test.c b/tools/testing/selftests/core/close_range_test.c index 749239930ca8..4db5ec73d016 100644 --- a/tools/testing/selftests/core/close_range_test.c +++ b/tools/testing/selftests/core/close_range_test.c @@ -476,7 +476,7 @@ TEST(close_range_cloexec_unshare_syzbot) /* * Create a huge gap in the fd table. When we now call - * CLOSE_RANGE_UNSHARE with a shared fd table and and with ~0U as upper + * CLOSE_RANGE_UNSHARE with a shared fd table and with ~0U as upper * bound the kernel will only copy up to fd1 file descriptors into the * new fd table. If the kernel is buggy and doesn't handle * CLOSE_RANGE_CLOEXEC correctly it will not have copied all file -- 2.17.1

2 years, 11 months

1
0
0 0

[PATCH] selftests/cgroup: fix repeated words in comments

by wangjianli

Delete the redundant word 'in'. Signed-off-by: wangjianli <wangjianli(a)cdjrlc.com> --- tools/testing/selftests/cgroup/test_freezer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/cgroup/test_freezer.c b/tools/testing/selftests/cgroup/test_freezer.c index ff519029f6f4..b479434e87b7 100644 --- a/tools/testing/selftests/cgroup/test_freezer.c +++ b/tools/testing/selftests/cgroup/test_freezer.c @@ -740,7 +740,7 @@ static int test_cgfreezer_ptraced(const char *root) /* * cg_check_frozen(cgroup, true) will fail here, - * because the task in in the TRACEd state. + * because the task in the TRACEd state. */ if (cg_freeze_wait(cgroup, false)) goto cleanup; -- 2.36.1

2 years, 11 months

3
2
0 0

[PATCH] selftests: Fix typo 'the the' in comment

by Slark Xiao

Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao(a)163.com> --- .../futex/functional/futex_requeue_pi_signal_restart.c | 2 +- tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c index f8c43ce8fe66..c6b8f32990c8 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c @@ -184,7 +184,7 @@ int main(int argc, char *argv[]) /* * If res is non-zero, we either requeued the waiter or hit an * error, break out and handle it. If it is zero, then the - * signal may have hit before the the waiter was blocked on f1. + * signal may have hit before the waiter was blocked on f1. * Try again. */ if (res > 0) { diff --git a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh index 0727e2012b68..43469c7de118 100755 --- a/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh +++ b/tools/testing/selftests/net/forwarding/vxlan_asymmetric.sh @@ -525,7 +525,7 @@ arp_suppression() log_test "neigh_suppress: on / neigh exists: yes" - # Delete the neighbour from the the SVI. A single ARP request should be + # Delete the neighbour from the SVI. A single ARP request should be # received by the remote VTEP RET=0 -- 2.25.1

2 years, 11 months

2
2
0 0

[PATCH] selftests: futex: Fix typo 'the the' in comment

by Slark Xiao

Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao(a)163.com> --- .../futex/functional/futex_requeue_pi_signal_restart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c index f8c43ce8fe66..c6b8f32990c8 100644 --- a/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c +++ b/tools/testing/selftests/futex/functional/futex_requeue_pi_signal_restart.c @@ -184,7 +184,7 @@ int main(int argc, char *argv[]) /* * If res is non-zero, we either requeued the waiter or hit an * error, break out and handle it. If it is zero, then the - * signal may have hit before the the waiter was blocked on f1. + * signal may have hit before the waiter was blocked on f1. * Try again. */ if (res > 0) { -- 2.25.1

2 years, 11 months

1
0
0 0

[REGRESSION] lkft kselftest for next-20220722

by lkft＠linaro.org

## Build * kernel: 5.19.0-rc7 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: 18c107a1f120d095404d141dfad8f594bdc44020 * git describe: next-20220722 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220722 ## Test Regressions (compared to next-20220721) * qemu_arm, kselftest-seccomp - seccomp.seccomp_benchmark ## Metric Regressions (compared to next-20220721) No metric regressions found. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test Fixes (compared to next-20220721) * qemu_arm, kselftest-rtc - rtc.rtctest - rtc.rtctest.rtc.date_read_loop ## Metric Fixes (compared to next-20220721) No metric fixes found. ## Test result summary total: 345, pass: 168, fail: 43, skip: 134, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-gpio * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-lib * kselftest-membarrier * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm -- Linaro LKFT https://lkft.linaro.org

2 years, 11 months

1
0
0 0

[PATCH] tools/testing/selftests/bpf/test_xdp_veth.sh: fix Couldn't retrieve pinned program

by Jie2x Zhou

Before change: selftests: bpf: test_xdp_veth.sh Couldn't retrieve pinned program '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory selftests: xdp_veth [SKIP] ok 20 selftests: bpf: test_xdp_veth.sh # SKIP After change: PING 10.1.1.33 (10.1.1.33) 56(84) bytes of data. 64 bytes from 10.1.1.33: icmp_seq=1 ttl=64 time=0.320 ms--- 10.1.1.33 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.320/0.320/0.320/0.000 ms selftests: xdp_veth [PASS] In test: ls /sys/fs/bpf/test_xdp_veth/progs/redirect_map_0 ls: cannot access '/sys/fs/bpf/test_xdp_veth/progs/redirect_map_0': No such file or directory ls /sys/fs/bpf/test_xdp_veth/progs/ xdp_redirect_map_0 xdp_redirect_map_1 xdp_redirect_map_2 Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jie2x Zhou <jie2x.zhou(a)intel.com> --- tools/testing/selftests/bpf/test_xdp_veth.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/test_xdp_veth.sh b/tools/testing/selftests/bpf/test_xdp_veth.sh index 392d28cc4e58..49936c4c8567 100755 --- a/tools/testing/selftests/bpf/test_xdp_veth.sh +++ b/tools/testing/selftests/bpf/test_xdp_veth.sh @@ -106,9 +106,9 @@ bpftool prog loadall \ bpftool map update pinned $BPF_DIR/maps/tx_port key 0 0 0 0 value 122 0 0 0 bpftool map update pinned $BPF_DIR/maps/tx_port key 1 0 0 0 value 133 0 0 0 bpftool map update pinned $BPF_DIR/maps/tx_port key 2 0 0 0 value 111 0 0 0 -ip link set dev veth1 xdp pinned $BPF_DIR/progs/redirect_map_0 -ip link set dev veth2 xdp pinned $BPF_DIR/progs/redirect_map_1 -ip link set dev veth3 xdp pinned $BPF_DIR/progs/redirect_map_2 +ip link set dev veth1 xdp pinned $BPF_DIR/progs/xdp_redirect_map_0 +ip link set dev veth2 xdp pinned $BPF_DIR/progs/xdp_redirect_map_1 +ip link set dev veth3 xdp pinned $BPF_DIR/progs/xdp_redirect_map_2 ip -n ${NS1} link set dev veth11 xdp obj xdp_dummy.o sec xdp ip -n ${NS2} link set dev veth22 xdp obj xdp_tx.o sec xdp -- 2.36.1

2 years, 11 months

2
1
0 0

[PATCH 1/4] kunit: string-stream: Simplify resource use

by Daniel Latypov

From: David Gow <davidgow(a)google.com> Currently, KUnit's string streams are themselves "KUnit resources". This is redundant since the stream itself is already allocated with kunit_kzalloc() and will thus be freed automatically at the end of the test. string-stream is only used internally within KUnit, and isn't using the extra features that resources provide like reference counting, being able to locate them dynamically as "test-local variables", etc. Indeed, the resource's refcount is never incremented when the pointer is returned. The fact that it's always manually destroyed is more evidence that the reference counting is unused. Signed-off-by: David Gow <davidgow(a)google.com> Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- lib/kunit/string-stream.c | 90 +++++++-------------------------------- lib/kunit/string-stream.h | 2 +- lib/kunit/test.c | 2 +- 3 files changed, 18 insertions(+), 76 deletions(-) diff --git a/lib/kunit/string-stream.c b/lib/kunit/string-stream.c index 141789ca8949..a2496abef152 100644 --- a/lib/kunit/string-stream.c +++ b/lib/kunit/string-stream.c @@ -12,64 +12,31 @@ #include "string-stream.h" -struct string_stream_fragment_alloc_context { - struct kunit *test; - int len; - gfp_t gfp; -}; -static int string_stream_fragment_init(struct kunit_resource *res, - void *context) +static struct string_stream_fragment *alloc_string_stream_fragment( + struct kunit *test, int len, gfp_t gfp) { - struct string_stream_fragment_alloc_context *ctx = context; struct string_stream_fragment *frag; - frag = kunit_kzalloc(ctx->test, sizeof(*frag), ctx->gfp); + frag = kunit_kzalloc(test, sizeof(*frag), gfp); if (!frag) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - frag->test = ctx->test; - frag->fragment = kunit_kmalloc(ctx->test, ctx->len, ctx->gfp); + frag->test = test; + frag->fragment = kunit_kmalloc(test, len, gfp); if (!frag->fragment) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - res->data = frag; - - return 0; + return frag; } -static void string_stream_fragment_free(struct kunit_resource *res) +static void string_stream_fragment_destroy(struct string_stream_fragment *frag) { - struct string_stream_fragment *frag = res->data; - list_del(&frag->node); kunit_kfree(frag->test, frag->fragment); kunit_kfree(frag->test, frag); } -static struct string_stream_fragment *alloc_string_stream_fragment( - struct kunit *test, int len, gfp_t gfp) -{ - struct string_stream_fragment_alloc_context context = { - .test = test, - .len = len, - .gfp = gfp - }; - - return kunit_alloc_resource(test, - string_stream_fragment_init, - string_stream_fragment_free, - gfp, - &context); -} - -static int string_stream_fragment_destroy(struct string_stream_fragment *frag) -{ - return kunit_destroy_resource(frag->test, - kunit_resource_instance_match, - frag); -} - int string_stream_vadd(struct string_stream *stream, const char *fmt, va_list args) @@ -169,48 +136,23 @@ struct string_stream_alloc_context { gfp_t gfp; }; -static int string_stream_init(struct kunit_resource *res, void *context) +struct string_stream *alloc_string_stream(struct kunit *test, gfp_t gfp) { struct string_stream *stream; - struct string_stream_alloc_context *ctx = context; - stream = kunit_kzalloc(ctx->test, sizeof(*stream), ctx->gfp); + stream = kunit_kzalloc(test, sizeof(*stream), gfp); if (!stream) - return -ENOMEM; + return ERR_PTR(-ENOMEM); - res->data = stream; - stream->gfp = ctx->gfp; - stream->test = ctx->test; + stream->gfp = gfp; + stream->test = test; INIT_LIST_HEAD(&stream->fragments); spin_lock_init(&stream->lock); - return 0; + return stream; } -static void string_stream_free(struct kunit_resource *res) +void string_stream_destroy(struct string_stream *stream) { - struct string_stream *stream = res->data; - string_stream_clear(stream); } - -struct string_stream *alloc_string_stream(struct kunit *test, gfp_t gfp) -{ - struct string_stream_alloc_context context = { - .test = test, - .gfp = gfp - }; - - return kunit_alloc_resource(test, - string_stream_init, - string_stream_free, - gfp, - &context); -} - -int string_stream_destroy(struct string_stream *stream) -{ - return kunit_destroy_resource(stream->test, - kunit_resource_instance_match, - stream); -} diff --git a/lib/kunit/string-stream.h b/lib/kunit/string-stream.h index 43f9508a55b4..494dee0f24bd 100644 --- a/lib/kunit/string-stream.h +++ b/lib/kunit/string-stream.h @@ -46,6 +46,6 @@ int string_stream_append(struct string_stream *stream, bool string_stream_is_empty(struct string_stream *stream); -int string_stream_destroy(struct string_stream *stream); +void string_stream_destroy(struct string_stream *stream); #endif /* _KUNIT_STRING_STREAM_H */ diff --git a/lib/kunit/test.c b/lib/kunit/test.c index b73d5bb5c473..0fb2771ca03e 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -267,7 +267,7 @@ static void kunit_fail(struct kunit *test, const struct kunit_loc *loc, kunit_print_string_stream(test, stream); - WARN_ON(string_stream_destroy(stream)); + string_stream_destroy(stream); } static void __noreturn kunit_abort(struct kunit *test) base-commit: 94681e289bf5d10c9db9db143d1a22d8717205c5 -- 2.37.1.359.gd136c6c3e2-goog

2 years, 11 months

2
7
0 0

[PATCH] selftests/vm: silence uninitialized variable warning

by Dan Carpenter

This code just reads from memory without caring about the data itself. However static checkers complain that "tmp" is never properly initialized. Initialize it to zero and change the name to "dummy" to show that we don't care about the value stored in it. Fixes: c4b6cb884011 ("selftests/vm: add hugetlb madvise MADV_DONTNEED MADV_REMOVE test") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- tools/testing/selftests/vm/hugetlb-madvise.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/vm/hugetlb-madvise.c b/tools/testing/selftests/vm/hugetlb-madvise.c index 6c6af40f5747..3c9943131881 100644 --- a/tools/testing/selftests/vm/hugetlb-madvise.c +++ b/tools/testing/selftests/vm/hugetlb-madvise.c @@ -89,10 +89,11 @@ void write_fault_pages(void *addr, unsigned long nr_pages) void read_fault_pages(void *addr, unsigned long nr_pages) { - unsigned long i, tmp; + unsigned long dummy = 0; + unsigned long i; for (i = 0; i < nr_pages; i++) - tmp += *((unsigned long *)(addr + (i * huge_page_size))); + dummy += *((unsigned long *)(addr + (i * huge_page_size))); } int main(int argc, char **argv) -- 2.35.1

2 years, 11 months

3
4
0 0

Re: linux-next: Tree for Jul 21 (mmc/host & KUNIT)

by Randy Dunlap

On 7/21/22 04:02, Stephen Rothwell wrote: > Hi all, > > Changes since 20220720: > on i386: ld: drivers/mmc/host/sdhci-of-aspeed.o: in function `aspeed_sdhci_phase_ddr52': sdhci-of-aspeed.c:(.text+0x2a2): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x2c5): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x2ea): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x30d): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x333): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x35a): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x380): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x3a7): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x3cd): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x3f4): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x41a): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x441): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x467): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x48e): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x4b4): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x4db): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x501): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x528): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x54e): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x575): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x59b): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x5c2): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x5e8): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x60f): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x635): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x65c): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x682): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x6a9): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x6cf): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x6f6): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x71c): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x743): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x769): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x790): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x7b6): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x7dd): undefined reference to `kunit_do_failed_assertion' ld: drivers/mmc/host/sdhci-of-aspeed.o: in function `aspeed_sdhci_phase_hs200': sdhci-of-aspeed.c:(.text+0x816): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x839): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x85e): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x881): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x8a7): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x8ce): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x8f4): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x91b): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x941): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x968): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x98e): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0x9b5): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0x9db): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xa02): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xa28): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xa4f): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xa75): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xa9c): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xac2): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xae9): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xb0f): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xb36): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xb5c): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xb83): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xba9): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xbd0): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xbf6): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xc1d): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xc43): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xc6a): undefined reference to `kunit_do_failed_assertion' ld: sdhci-of-aspeed.c:(.text+0xc90): undefined reference to `kunit_binary_assert_format' ld: sdhci-of-aspeed.c:(.text+0xcb7): undefined reference to `kunit_do_failed_assertion' Full randconfig file is attached. -- ~Randy

2 years, 11 months

2
1
0 0

[PATCH v2] Documentation: kunit: Add CLI args for kunit_tool

by Sadiya Kazi

Run_wrapper.rst was missing some command line arguments. Added additional args in the file. Signed-off-by: Sadiya Kazi <sadiyakazi(a)google.com> --- Changes since V1: https://lore.kernel.org/linux-kselftest/20220719092214.995965-1-sadiyakazi@… - Addressed most of the review comments from Maira and David, except removing the duplicate arguments as I felt its worth keeping them in the reference documentation as well as in context. We can improve them and differentiate their use cases in the future patches. --- Documentation/dev-tools/kunit/run_wrapper.rst | 60 ++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 5e560f2c5fca..600af7ac5f88 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -233,7 +233,7 @@ Command-Line Arguments ====================== kunit_tool has a number of other command-line arguments which can -be useful for our test environment. Below the most commonly used +be useful for our test environment. Below are the most commonly used command line arguments: - ``--help``: Lists all available options. To list common options, @@ -257,3 +257,61 @@ command line arguments: added or modified. Instead, enable all tests which have satisfied dependencies by adding ``CONFIG_KUNIT_ALL_TESTS=y`` to your ``.kunitconfig``. + +- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig`` + file. For example: + + - ``lib/kunit/.kunitconfig`` can be the path of the file. + + - ``lib/kunit`` can be the directory in which the file is located. + + This file is used to build and run with a predefined set of tests + and their dependencies. For example, to run tests for a given subsystem. + +- ``--kconfig_add``: Specifies additional configuration options to be + appended to the ``.kunitconfig`` file. + For example, ``./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y``. + +- ``--arch``: Runs tests on the specified architecture. The architecture + specified must match the Kbuild ARCH environment variable. + For example, i386, x86_64, arm, um, etc. Non-UML architectures run on QEMU. + Default is `um`. + +- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the + same argument as passed to the ``CROSS_COMPILE`` variable used by + Kbuild. This will be the prefix for the toolchain + binaries such as GCC. For example: + + - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on + our system. + + - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` + if we have downloaded the microblaze toolchain from the 0-day + website to a specified path in our home directory called toolchains. + +- ``--qemu_config``: Specifies the path to a file containing a + custom qemu architecture definition. This should be a python file + containing a `QemuArchParams` object. + +- ``--qemu_args``: Specifies additional QEMU arguments, for example, "-smp 8". + +- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously. + By default, this is set to the number of cores on your system. + +- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run. + This does not include the time taken to build the tests. + +- ``--kernel_args``: Specifies additional kernel command-line arguments. Might be repeated. + +- ``--run_isolated``: If set, boots the kernel for each individual suite/test. + This is useful for debugging a non-hermetic test, one that + might pass/fail based on what ran before it. + +- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are: + + - ``all``: To view the full kernel output, use ``--raw_output=all``. + + - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``. + +- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or + saves to a file if a filename is specified. -- 2.37.0.170.g444d1eabd0-goog

2 years, 11 months

5
5
0 0

[RFC V2 PATCH 0/8] selftests: KVM: selftests for fd-based approach of supporting private memory

by Vishal Annapurve

This v2 series implements selftests targeting the feature floated by Chao via: https://lore.kernel.org/linux-mm/20220310140911.50924-1-chao.p.peng@linux.i… Below changes aim to test the fd based approach for guest private memory in context of normal (non-confidential) VMs executing on non-confidential platforms. priv_memfd_test.c file adds a suite of selftests to access private memory from the guest via private/shared accesses and checking if the contents can be leaked to/accessed by vmm via shared memory view. Updates in V2: 1) Tests are added to exercise implicit/explicit memory conversion paths. 2) Test is added to exercise UPM feature without double memory allocation. This series has dependency on following patches: 1) V5 series patches from Chao mentioned above. 2) https://github.com/vishals4gh/linux/commit/b9adedf777ad84af39042e9c19899600… - Fixes host kernel crash with current implementation 3) https://github.com/vishals4gh/linux/commit/0577e351ee36d52c1f6cdcb1b8de7aa6… - Confidential platforms along with the confidentiality aware software stack support a notion of private/shared accesses from the confidential VMs. Generally, a bit in the GPA conveys the shared/private-ness of the access. Non-confidential platforms don't have a notion of private or shared accesses from the guest VMs. To support this notion, KVM_HC_MAP_GPA_RANGE is modified to allow marking an access from a VM within a GPA range as always shared or private. There is an ongoing discussion about adding support for software-only confidential VMs, which should replace this patch. 4) https://github.com/vishals4gh/linux/commit/8d46aea9a7d72e4b1b998066ce0dde08… - Temporary placeholder to be able to test memory conversion paths till the memory conversion exit error code is finalized. 5) https://github.com/vishals4gh/linux/commit/4c36706477c62d9416d635fa6ac4ef64… - Fixes GFN calculation during memory conversion path. Github link for the patches posted as part of this series: https://github.com/vishals4gh/linux/commits/priv_memfd_selftests_rfc_v2 Austin Diviness (1): selftests: kvm: Add hugepage support to priv_memfd_test suite. Vishal Annapurve (7): selftests: kvm: Fix inline assembly for hypercall selftests: kvm: Add a basic selftest to test private memory selftests: kvm: priv_memfd_test: Add support for memory conversion selftests: kvm: priv_memfd_test: Add shared access test selftests: kvm: Add implicit memory conversion tests selftests: kvm: Add KVM_HC_MAP_GPA_RANGE hypercall test selftests: kvm: priv_memfd: Add test avoiding double allocation tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/lib/x86_64/processor.c | 2 +- tools/testing/selftests/kvm/priv_memfd_test.c | 1359 +++++++++++++++++ 3 files changed, 1361 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/priv_memfd_test.c -- 2.36.0.512.ge40c2bad7a-goog

2 years, 11 months

3
23
0 0

[PATCH v1 0/3] arm64/sve: Document our actual SVE syscall ABI

by Mark Brown

Currently our SVE syscall ABI documentation does not reflect the actual implemented ABI, it says that register state not shared with FPSIMD becomes undefined on syscall when in reality we always clear it. Since changing this would cause a change in the observed kernel behaviour there is a substantial desire to avoid taking advantage of the documented ABI so instead let's document what we actually do so it's clear that it is in reality an ABI. There has been some pushback on tightening the documentation in the past but it is hard to see who that helps, it makes the implementation decisions less clear and makes it harder for people to discover and make use of the actual ABI. The main practical concern is that qemu's user mode does not currently flush the registers. Mark Brown (3): kselftest/arm64: Correct buffer allocation for SVE Z registers arm64/sve: Document our actual ABI for clearing registers on syscall kselftest/arm64: Enforce actual ABI for SVE syscalls Documentation/arm64/sve.rst | 2 +- .../testing/selftests/arm64/abi/syscall-abi.c | 61 ++++++++++++------- 2 files changed, 41 insertions(+), 22 deletions(-) base-commit: a111daf0c53ae91e71fd2bfe7497862d14132e3e -- 2.30.2

2 years, 11 months

2
4
0 0

[REGRESSION] lkft kselftest for next-20220721

by lkft＠linaro.org

## Build * kernel: 5.19.0-rc7 * git: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next * git branch: master * git commit: a3fd3ca134d9485a0f9a7bdcffd7f8bae27f79d3 * git describe: next-20220721 * test details: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20220721 ## Test Regressions (compared to v5.19-rc6-12429-g4ee7eaa411ee) * qemu_arm, kselftest-rtc - rtc.rtctest - rtc.rtctest.rtc.date_read_loop ## Metric Regressions (compared to v5.19-rc6-12429-g4ee7eaa411ee) No metric regressions found. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Test Fixes (compared to v5.19-rc6-12429-g4ee7eaa411ee) * qemu_arm, kselftest-seccomp - seccomp.seccomp_benchmark ## Metric Fixes (compared to v5.19-rc6-12429-g4ee7eaa411ee) No metric fixes found. ## Test result summary total: 345, pass: 167, fail: 44, skip: 134, xfail: 0 ## Build Summary ## Test suites summary * kselftest-android * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-gpio * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-lib * kselftest-membarrier * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-vm -- Linaro LKFT https://lkft.linaro.org

2 years, 11 months

1
0
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "mismtach" -> "mismatch"

by Colin Ian King

There is a spelling mistake in an assert message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/x86_64/cpuid_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/cpuid_test.c b/tools/testing/selftests/kvm/x86_64/cpuid_test.c index a6aeee2e62e4..c85113d1aeb2 100644 --- a/tools/testing/selftests/kvm/x86_64/cpuid_test.c +++ b/tools/testing/selftests/kvm/x86_64/cpuid_test.c @@ -93,7 +93,7 @@ static void compare_cpuids(const struct kvm_cpuid2 *cpuid1, TEST_ASSERT(e1->function == e2->function && e1->index == e2->index && e1->flags == e2->flags, - "CPUID entries[%d] mismtach: 0x%x.%d.%x vs. 0x%x.%d.%x\n", + "CPUID entries[%d] mismatch: 0x%x.%d.%x vs. 0x%x.%d.%x\n", i, e1->function, e1->index, e1->flags, e2->function, e2->index, e2->flags); -- 2.35.3

2 years, 11 months

1
0
0 0

Re: [PATCH net] ip_tunnel: allow to inherit from VLAN encapsulated IP frames

by Nicolas Dichtel

+ linux-kselftest(a)vger.kernel.org Le 20/07/2022 à 17:24, Matthias May a écrit : > Hi > > I finally got around to do the previously mentioned selftest for gretap, vxlan > and geneve. > See the bash-script below. > > Many of the vxlan/geneve tests are currently failing, with gretap working on > net-next > because of the fixes i sent. > What is the policy on sending selftests that are failing? > Are fixes for the failures required in advance? I don't know, I've added linux-kselftest(a)vger.kernel.org to the thread. Regards, Nicolas > > I'm not sure i can fix them. > Geneve seems to ignore the 3 upper bits of the DSCP completely.

2 years, 11 months

1
0
0 0

相互理解

by DR JOSEPH ANYA

-- 亲爱的朋友, 我是约瑟夫*安雅先生，在亚行银行在西非。我正在联系你与我合作只检索总额(3 950万美元)。押金是由我们已故的客户乔治。小。我在成功收到资金后向您提出总额的40％，我向您保证，这笔交易是100％无风险和合法的。我寻求你的合伙要求这些资金，以避免被银行没收。联系我了解更多细节。我期待你的紧急答复致以最良好的问候。约瑟夫*安雅博士。

2 years, 11 months

1
0
0 0

[PATCH v2 0/4] Introduce security_create_user_ns()

by Frederick Lawler

While creating a LSM BPF MAC policy to block user namespace creation, we used the LSM cred_prepare hook because that is the closest hook to prevent a call to create_user_ns(). The calls look something like this: cred = prepare_creds() security_prepare_creds() call_int_hook(cred_prepare, ... if (cred) create_user_ns(cred) We noticed that error codes were not propagated from this hook and introduced a patch [1] to propagate those errors. The discussion notes that security_prepare_creds() is not appropriate for MAC policies, and instead the hook is meant for LSM authors to prepare credentials for mutation. [2] Ultimately, we concluded that a better course of action is to introduce a new security hook for LSM authors. [3] This patch set first introduces a new security_create_user_ns() function and create_user_ns LSM hook, then marks the hook as sleepable in BPF. Links: 1. https://lore.kernel.org/all/20220608150942.776446-1-fred@cloudflare.com/ 2. https://lore.kernel.org/all/87y1xzyhub.fsf@email.froward.int.ebiederm.org/ 3. https://lore.kernel.org/all/9fe9cd9f-1ded-a179-8ded-5fde8960a586@cloudflare… Changes since v1: - Add selftests/bpf: Add tests verifying bpf lsm create_user_ns hook patch - Add selinux: Implement create_user_ns hook patch - Change function signature of security_create_user_ns() to only take struct cred - Move security_create_user_ns() call after id mapping check in create_user_ns() - Update documentation to reflect changes Frederick Lawler (4): security, lsm: Introduce security_create_user_ns() bpf-lsm: Make bpf_lsm_create_user_ns() sleepable selftests/bpf: Add tests verifying bpf lsm create_user_ns hook selinux: Implement create_user_ns hook include/linux/lsm_hook_defs.h | 1 + include/linux/lsm_hooks.h | 4 + include/linux/security.h | 6 ++ kernel/bpf/bpf_lsm.c | 1 + kernel/user_namespace.c | 5 ++ security/security.c | 5 ++ security/selinux/hooks.c | 9 ++ security/selinux/include/classmap.h | 2 + .../selftests/bpf/prog_tests/deny_namespace.c | 88 +++++++++++++++++++ .../selftests/bpf/progs/test_deny_namespace.c | 39 ++++++++ 10 files changed, 160 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/deny_namespace.c create mode 100644 tools/testing/selftests/bpf/progs/test_deny_namespace.c -- 2.30.2

2 years, 11 months

6
15
0 0

[PATCH v3] apparmor: test: Remove some casts which are no-longer required

by David Gow

With some of the stricter type checking in KUnit's EXPECT macros removed, several casts in policy_unpack_test are no longer required. Remove the unnecessary casts, making the conditions clearer. Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Acked-by: John Johansen <john.johansen(a)canonical.com> Signed-off-by: David Gow <davidgow(a)google.com> --- This is a rebase and resend of [1], which had been accepted into the AppArmor tree, but eventually conflicted with [2]. Let's push it via the KUnit tree to avoid any further conflicts, as discussed in [3]. Cheers, -- David [1]: https://lore.kernel.org/linux-kselftest/20210513193204.816681-9-davidgow@go… [2]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… [3]: https://lore.kernel.org/all/20220405125540.2135d81d@canb.auug.org.au/ --- security/apparmor/policy_unpack_test.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/security/apparmor/policy_unpack_test.c b/security/apparmor/policy_unpack_test.c index 5c18d2f19862..7954cb23d5f2 100644 --- a/security/apparmor/policy_unpack_test.c +++ b/security/apparmor/policy_unpack_test.c @@ -177,7 +177,7 @@ static void policy_unpack_test_unpack_array_out_of_bounds(struct kunit *test) array_size = unpack_array(puf->e, name); - KUNIT_EXPECT_EQ(test, array_size, (u16)0); + KUNIT_EXPECT_EQ(test, array_size, 0); KUNIT_EXPECT_PTR_EQ(test, puf->e->pos, puf->e->start + TEST_NAMED_ARRAY_BUF_OFFSET); } @@ -391,10 +391,10 @@ static void policy_unpack_test_unpack_u16_chunk_basic(struct kunit *test) size = unpack_u16_chunk(puf->e, &chunk); - KUNIT_EXPECT_PTR_EQ(test, (void *)chunk, + KUNIT_EXPECT_PTR_EQ(test, chunk, puf->e->start + TEST_U16_OFFSET + 2); - KUNIT_EXPECT_EQ(test, size, (size_t)TEST_U16_DATA); - KUNIT_EXPECT_PTR_EQ(test, puf->e->pos, (void *)(chunk + TEST_U16_DATA)); + KUNIT_EXPECT_EQ(test, size, TEST_U16_DATA); + KUNIT_EXPECT_PTR_EQ(test, puf->e->pos, (chunk + TEST_U16_DATA)); } static void policy_unpack_test_unpack_u16_chunk_out_of_bounds_1( @@ -408,7 +408,7 @@ static void policy_unpack_test_unpack_u16_chunk_out_of_bounds_1( size = unpack_u16_chunk(puf->e, &chunk); - KUNIT_EXPECT_EQ(test, size, (size_t)0); + KUNIT_EXPECT_EQ(test, size, 0); KUNIT_EXPECT_NULL(test, chunk); KUNIT_EXPECT_PTR_EQ(test, puf->e->pos, puf->e->end - 1); } @@ -430,7 +430,7 @@ static void policy_unpack_test_unpack_u16_chunk_out_of_bounds_2( size = unpack_u16_chunk(puf->e, &chunk); - KUNIT_EXPECT_EQ(test, size, (size_t)0); + KUNIT_EXPECT_EQ(test, size, 0); KUNIT_EXPECT_NULL(test, chunk); KUNIT_EXPECT_PTR_EQ(test, puf->e->pos, puf->e->start + TEST_U16_OFFSET); } -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

2
1
0 0

[PATCH] kselftest/arm64: Correct buffer allocation for SVE Z registers

by Mark Brown

The buffer used for verifying SVE Z registers allocated enough space for 16 maximally sized registers rather than 32 due to using the macro for the number of P registers. In practice this didn't matter since for historical reasons the maximum VQ defined in the ABI is greater the architectural maximum so we will always allocate more space than is needed even with emulated platforms implementing the architectural maximum. Still, we should use the right define. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- tools/testing/selftests/arm64/abi/syscall-abi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/arm64/abi/syscall-abi.c b/tools/testing/selftests/arm64/abi/syscall-abi.c index b632bfe9e022..95229fa73232 100644 --- a/tools/testing/selftests/arm64/abi/syscall-abi.c +++ b/tools/testing/selftests/arm64/abi/syscall-abi.c @@ -113,8 +113,8 @@ static int check_fpr(struct syscall_cfg *cfg, int sve_vl, int sme_vl, } static uint8_t z_zero[__SVE_ZREG_SIZE(SVE_VQ_MAX)]; -uint8_t z_in[SVE_NUM_PREGS * __SVE_ZREG_SIZE(SVE_VQ_MAX)]; -uint8_t z_out[SVE_NUM_PREGS * __SVE_ZREG_SIZE(SVE_VQ_MAX)]; +uint8_t z_in[SVE_NUM_ZREGS * __SVE_ZREG_SIZE(SVE_VQ_MAX)]; +uint8_t z_out[SVE_NUM_ZREGS * __SVE_ZREG_SIZE(SVE_VQ_MAX)]; static void setup_z(struct syscall_cfg *cfg, int sve_vl, int sme_vl, uint64_t svcr) -- 2.30.2

2 years, 11 months

1
0
0 0

[PATCH] selftests: memcg: uninitialized variable in test_memcg_reclaim()

by Dan Carpenter

The "fd" is used on the clean up path without ever being initialized. Fixes: eae3cb2e87ff ("selftests: cgroup: add a selftest for memory.reclaim") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- I kind of went over kill on fixing this as if it were real code which matters. :P .../selftests/cgroup/test_memcontrol.c | 23 +++++++++++-------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/cgroup/test_memcontrol.c b/tools/testing/selftests/cgroup/test_memcontrol.c index 8833359556f3..08681699c2f9 100644 --- a/tools/testing/selftests/cgroup/test_memcontrol.c +++ b/tools/testing/selftests/cgroup/test_memcontrol.c @@ -658,18 +658,18 @@ static int test_memcg_reclaim(const char *root) memcg = cg_name(root, "memcg_test"); if (!memcg) - goto cleanup; + return KSFT_FAIL; if (cg_create(memcg)) - goto cleanup; + goto free_memcg; current = cg_read_long(memcg, "memory.current"); if (current != 0) - goto cleanup; + goto destroy_memcg; fd = get_temp_fd(); if (fd < 0) - goto cleanup; + goto destroy_memcg; cg_run_nowait(memcg, alloc_pagecache_50M_noexit, (void *)(long)fd); @@ -697,7 +697,7 @@ static int test_memcg_reclaim(const char *root) fprintf(stderr, "failed to allocate %ld for memcg reclaim test\n", expected_usage); - goto cleanup; + goto close; } } @@ -717,7 +717,7 @@ static int test_memcg_reclaim(const char *root) * not reclaim the full amount. */ if (to_reclaim <= 0) - goto cleanup; + goto close; snprintf(buf, sizeof(buf), "%ld", to_reclaim); @@ -729,7 +729,7 @@ static int test_memcg_reclaim(const char *root) */ current = cg_read_long(memcg, "memory.current"); if (!values_close(current, MB(30), 3) && current > MB(30)) - goto cleanup; + goto close; break; } @@ -738,14 +738,17 @@ static int test_memcg_reclaim(const char *root) continue; /* We got an unexpected error or ran out of retries. */ - goto cleanup; + goto close; } ret = KSFT_PASS; -cleanup: + +close: + close(fd); +destroy_memcg: cg_destroy(memcg); +free_memcg: free(memcg); - close(fd); return ret; } -- 2.35.1

2 years, 11 months

2
3
0 0

[PATCH 00/17] nolibc: add preliminary self tests

by Willy Tarreau

Hi Paul, as previously promised, here comes the nolibc update which introduces the minimal self-test infrastructure that aims at being reasonably easy to expand further. It's based on your branch "dev.2022.06.30b" that contains the previous minor fixes that aimed at addressing Linus' concerns about the build process inconsistencies. The way it works tries to mimmick as much as possible the regular build process, so that it reuses the same ARCH, CC, CROSS_COMPILE to build the test program, that will be embedded into an initramfs and the kernel is (re)built with that initramfs. Then you can decide to run that kernel under QEMU for the supported archs, and the output of the tests appears in an output text file in a format that's easily greppable and diffable. A single target "run" does everything. By default it will reuse your existing .config (so that developers continue to use their regular config handling), though it can also create a known-to-work defconfig for each arch. The reason behind this is that it took me a moment to figure certain defconfig + machine name combinations and I found it better to put them there once for all. I've successfully tested it on arm, arm64, i386, x86_64. riscv64 works except two syscalls which return unexpected errors, and mips segfaults in sbrk(). I don't know why yet, but this proves that it's worth having such a test. There are not that many tests yet (71), those that have to run can be filtered either from the program's command line or from a NOLIBC_TEST environment variable so that it's possible to skip broken ones or to focus on a few ranges only. Tests are numerically numbered, and are conveniently handled in a switch/case statement so that a relative line number assigns the number to the test. That's convenient because the vast majority of syscall tests are one-liners. This sometimes slightly upsets check-patch when lines get moderately long but that significantly improves legibility. There are expectation for both successes and failures (e.g. -1 ENOTDIR). I'm sure this can be improved later (and that's the goal). Right now it covers two test families: - syscalls - stdlib (str* functions mostly) I suspect that over time we might want to split syscalls into different parts (e.g. core, fs, etc maybe) but I could be wrong. The program can automatically modulate QEMU's return value on x86 when QEMU is run with the appropriate options, but for now I'm not using it as I felt like it didn't bring much value, and the output is more useful. That's debatable, and maybe some might want to use it in bisect scripts for example. It's too early to say IMHO. Oh, I also arranged the code so that the test also builds with glibc. I noticed that when adding a new test that fails, sometimes it's convenient to see if it's the nolibc part that's broken or the test. I don't find this critical but the required includes and ifdefs are there so that it should be easy to maintain over time as well. I'm obviously interested in comments, but really, I don't want to overdesign something for a first step, it remains a very modest test program and I'd like that it remains easy to hack on it and to contribute new tests that are deemed useful. I'm CCing the few who already contributed some patches and/or expressed interest, as well as Linus who had a first bad experience when trying to test it, hoping this one will be better. I'm pasting below [1] a copy of a test on x86_64 below, that's summed up as "71 test(s) passed" at the end of the "run" target. If there's no objection, it would be nice to have this with your current series, as it definitely helps spot and fix the bugs. In parallel I'll see if I can figure the problems with the two tests that fail each on a specific arch and I might possibly have a few extra fixes for the current nolibc. Thank you! Willy [1] example output ----8<---- Running test 'syscall' 0 getpid = 1 [OK] 1 getppid = 0 [OK] 5 getpgid_self = 0 [OK] 6 getpgid_bad = -1 ESRCH [OK] 7 kill_0 = 0 [OK] 8 kill_CONT = 0 [OK] 9 kill_BADPID = -1 ESRCH [OK] 10 sbrk = 0 [OK] 11 brk = 0 [OK] 12 chdir_root = 0 [OK] 13 chdir_dot = 0 [OK] 14 chdir_blah = -1 ENOENT [OK] 15 chmod_net = 0 [OK] 16 chmod_self = -1 EPERM [OK] 17 chown_self = -1 EPERM [OK] 18 chroot_root = 0 [OK] 19 chroot_blah = -1 ENOENT [OK] 20 chroot_exe = -1 ENOTDIR [OK] 21 close_m1 = -1 EBADF [OK] 22 close_dup = 0 [OK] 23 dup_0 = 3 [OK] 24 dup_m1 = -1 EBADF [OK] 25 dup2_0 = 100 [OK] 26 dup2_m1 = -1 EBADF [OK] 27 dup3_0 = 100 [OK] 28 dup3_m1 = -1 EBADF [OK] 29 execve_root = -1 EACCES [OK] 30 getdents64_root = 120 [OK] 31 getdents64_null = -1 ENOTDIR [OK] 32 gettimeofday_null = 0 [OK] 38 ioctl_tiocinq = 0 [OK] 39 ioctl_tiocinq = 0 [OK] 40 link_root1 = -1 EEXIST [OK] 41 link_blah = -1 ENOENT [OK] 42 link_dir = -1 EPERM [OK] 43 link_cross = -1 EXDEV [OK] 44 lseek_m1 = -1 EBADF [OK] 45 lseek_0 = -1 ESPIPE [OK] 46 mkdir_root = -1 EEXIST [OK] 47 open_tty = 3 [OK] 48 open_blah = -1 ENOENT [OK] 49 poll_null = 0 [OK] 50 poll_stdout = 1 [OK] 51 poll_fault = -1 EFAULT [OK] 52 read_badf = -1 EBADF [OK] 53 sched_yield = 0 [OK] 54 select_null = 0 [OK] 55 select_stdout = 1 [OK] 56 select_fault = -1 EFAULT [OK] 57 stat_blah = -1 ENOENT [OK] 58 stat_fault = -1 EFAULT [OK] 59 symlink_root = -1 EEXIST [OK] 60 unlink_root = -1 EISDIR [OK] 61 unlink_blah = -1 ENOENT [OK] 62 wait_child = -1 ECHILD [OK] 63 waitpid_min = -1 ESRCH [OK] 64 waitpid_child = -1 ECHILD [OK] 65 write_badf = -1 EBADF [OK] 66 write_zero = 0 [OK] Errors during this test: 0 Running test 'stdlib' 0 getenv_TERM = <linux> [OK] 1 getenv_blah = <(null)> [OK] 2 setcmp_blah_blah = 0 [OK] 3 setcmp_blah_blah2 = -50 [OK] 4 setncmp_blah_blah = 0 [OK] 5 setncmp_blah_blah4 = 0 [OK] 6 setncmp_blah_blah5 = -53 [OK] 7 setncmp_blah_blah6 = -54 [OK] 8 strchr_foobar_o = <oobar> [OK] 9 strchr_foobar_z = <(null)> [OK] 10 strrchr_foobar_o = <obar> [OK] 11 strrchr_foobar_z = <(null)> [OK] Errors during this test: 0 Total number of errors: 0 ---->8---- -- Willy Tarreau (17): tools/nolibc: make argc 32-bit in riscv startup code tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition selftests/nolibc: add basic infrastructure to ease creation of nolibc tests selftests/nolibc: support a test definition format selftests/nolibc: implement a few tests for various syscalls selftests/nolibc: add a few tests for some stdlib functions selftests/nolibc: exit with poweroff on success when getpid() == 1 selftests/nolibc: on x86, support exiting with isa-debug-exit selftests/nolibc: recreate and populate /dev and /proc if missing selftests/nolibc: condition some tests on /proc existence selftests/nolibc: support glibc as well selftests/nolibc: add a "kernel" target to build the kernel with the initramfs selftests/nolibc: add a "defconfig" target selftests/nolibc: add a "run" target to start the kernel in QEMU selftests/nolibc: "sysroot" target installs a local copy of the sysroot selftests/nolibc: add a "help" target MAINTAINERS | 1 + tools/include/nolibc/arch-riscv.h | 2 +- tools/include/nolibc/sys.h | 4 +- tools/testing/selftests/nolibc/Makefile | 135 ++++ tools/testing/selftests/nolibc/nolibc-test.c | 757 +++++++++++++++++++ 5 files changed, 896 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/nolibc/Makefile create mode 100644 tools/testing/selftests/nolibc/nolibc-test.c -- 2.17.5

2 years, 11 months

3
24
0 0

Re: [PATCH v2 4/4] selinux: Implement create_user_ns hook

by Paul Moore

On Tue, Jul 19, 2022 at 10:42 PM Karl MacMillan <karl(a)bigbadwolfsecurity.com> wrote: > On Thu, Jul 7, 2022 at 6:34 PM Frederick Lawler <fred(a)cloudflare.com> wrote: >> >> Unprivileged user namespace creation is an intended feature to enable >> sandboxing, however this feature is often used to as an initial step to >> perform a privilege escalation attack. >> >> This patch implements a new namespace { userns_create } access control >> permission to restrict which domains allow or deny user namespace >> creation. This is necessary for system administrators to quickly protect >> their systems while waiting for vulnerability patches to be applied. >> >> This permission can be used in the following way: >> >> allow domA_t domB_t : namespace { userns_create }; > > > Isn’t this actually domA_t domA_t : namespace . . . > > I got confused reading this initially trying to figure out what the second domain type would be, but looking at the code cleared that up. Ah, good catch, thanks Karl! -- paul-moore.com

2 years, 11 months

1
0
0 0

[PATCH] Documentation: kunit: Add CLI args for kunit_tool

by Sadiya Kazi

Run_wrapper.rst was missing some command line arguments. Added additional args in the file. Included all initial review comments. Signed-off-by: Sadiya Kazi <sadiyakazi(a)google.com> --- Documentation/dev-tools/kunit/run_wrapper.rst | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 5e560f2c5fca..91f5dda36e83 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -257,3 +257,51 @@ command line arguments: added or modified. Instead, enable all tests which have satisfied dependencies by adding ``CONFIG_KUNIT_ALL_TESTS=y`` to your ``.kunitconfig``. +- ``--kunitconfig``: Specifies the path to the ``.kunitconfig`` file. + This Kconfig fragment enables KUnit tests. The "/.kunitconfig" gets + appended to the path specified. For example, If a directory path "lib/kunit" + is given, the complete path will be "lib/kunit/.kunitconfig". + +- ``--kconfig_add``: Specifies additional configuration options to be + appended to the ``.kunitconfig`` file. For example, ``CONFIG_KASAN=y``. + +- ``--arch``: Runs tests with the specified architecture. The architecture + specified must match the string passed to the ARCH make parameter. + For example, i386, x86_64, arm, um, etc. Non-UML architectures run on QEMU. + Default to 'um'. + +- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the + same argument as passed to the ``CROSS_COMPILE`` variable used by + Kbuild. This will be the prefix for the toolchain + binaries such as GCC. For example: + + - ``sparc64-linux-gnu`` if we have the sparc toolchain installed on + our system. + + - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux`` + if we have downloaded the microblaze toolchain from the 0-day + website to a specified path in our home directory called toolchains. + +- ``--qemu_config``: Specifies the path to the file containing a + custom qemu architecture definition. This should be a python file + containing a QemuArchParams object. + +- ``--qemu_args``: Specifies additional QEMU arguments, for example, "-smp 8". + +- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously. + By default, this is set to the number of cores on your system. + +- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run. + This does not include the time taken to build the tests. + +- ``--kernel_args``: Specifies the kernel command-line arguments. Might be repeated. + +- ``--run_isolated``: If set, boots the kernel for each individual suite/test. + This is useful for debugging a non-hermetic test, one that + might pass/fail based on what ran before it. + +- ``--raw_output``: If set, generates unformatted output from kernel. + If set to ``--raw_output=kunit``, filters to just KUnit output. + +- ``--json``: If set, it stores the test results in a JSON format and prints to stdout or + saves to a file if a filename is specified. -- 2.37.0.170.g444d1eabd0-goog

2 years, 11 months

3
2
0 0

[PATCH] selftest/vm: uninitialized variable in main()

by Dan Carpenter

Initialize "length" to zero by default. Fixes: ff712a627f72 ("selftests/vm: cleanup hugetlb file after mremap test") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- tools/testing/selftests/vm/hugepage-mremap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/vm/hugepage-mremap.c b/tools/testing/selftests/vm/hugepage-mremap.c index 585978f181ed..e63a0214f639 100644 --- a/tools/testing/selftests/vm/hugepage-mremap.c +++ b/tools/testing/selftests/vm/hugepage-mremap.c @@ -107,7 +107,7 @@ static void register_region_with_uffd(char *addr, size_t len) int main(int argc, char *argv[]) { - size_t length; + size_t length = 0; if (argc != 2 && argc != 3) { printf("Usage: %s [length_in_MB] <hugetlb_file>\n", argv[0]); -- 2.35.1

2 years, 11 months

3
2
0 0

[bug report] selftest/net/xfrm: Add test for ipsec tunnel

by Dan Carpenter

Hello Dmitry Safonov, The patch bc2652b7ae1e: "selftest/net/xfrm: Add test for ipsec tunnel" from Sep 21, 2020, leads to the following Smatch static checker warning: tools/testing/selftests/net/ipsec.c:2294 main() warn: impossible condition '(nr_process == 9223372036854775807) => (0-4294967295 == s64max)' tools/testing/selftests/net/ipsec.c 2278 int main(int argc, char **argv) 2279 { 2280 unsigned int nr_process = 1; 2281 int route_sock = -1, ret = KSFT_SKIP; 2282 int test_desc_fd[2]; 2283 uint32_t route_seq; 2284 unsigned int i; 2285 2286 if (argc > 2) 2287 exit_usage(argv); 2288 2289 if (argc > 1) { 2290 char *endptr; 2291 2292 errno = 0; 2293 nr_process = strtol(argv[1], &endptr, 10); --> 2294 if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) nr_process is a u32 so it can't be LONG_MIN/MAX. Do we even need to test this or could we just fall through to the the > MAX_PROCESSES warning? 2295 || (errno != 0 && nr_process == 0) 2296 || (endptr == argv[1]) || (*endptr != '\0')) { 2297 printk("Failed to parse [nr_process]"); 2298 exit_usage(argv); 2299 } 2300 2301 if (nr_process > MAX_PROCESSES || !nr_process) { 2302 printk("nr_process should be between [1; %u]", 2303 MAX_PROCESSES); 2304 exit_usage(argv); 2305 } 2306 } 2307 regards, dan carpenter

2 years, 11 months

2
1
0 0

[PATCH] selftests/bpf: fix a test for snprintf() overflow

by Dan Carpenter

The snprintf() function returns the number of bytes which *would* have been copied if there were space. In other words, it can be > sizeof(pin_path). Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- tools/testing/selftests/bpf/prog_tests/btf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/btf.c b/tools/testing/selftests/bpf/prog_tests/btf.c index 941b0100bafa..ef6528b8084c 100644 --- a/tools/testing/selftests/bpf/prog_tests/btf.c +++ b/tools/testing/selftests/bpf/prog_tests/btf.c @@ -5338,7 +5338,7 @@ static void do_test_pprint(int test_num) ret = snprintf(pin_path, sizeof(pin_path), "%s/%s", "/sys/fs/bpf", test->map_name); - if (CHECK(ret == sizeof(pin_path), "pin_path %s/%s is too long", + if (CHECK(ret >= sizeof(pin_path), "pin_path %s/%s is too long", "/sys/fs/bpf", test->map_name)) { err = -1; goto done; -- 2.35.1

2 years, 11 months

3
2
0 0

[PATCH bpf-next v6 00/23] Introduce eBPF support for HID devices

by Benjamin Tissoires

Hi, and after a little bit of time, here comes the v6 of the HID-BPF series. Again, for a full explanation of HID-BPF, please refer to the last patch in this series (23/23). This version sees some improvements compared to v5 on top of the usual addressing of the previous comments: - now I think every eBPF core change has a matching selftest added - the kfuncs declared in syscall can now actually access the memory of the context - the code to retrieve the BTF ID of the various HID hooks is much simpler (just a plain use of the BTF_ID() API instead of loading/unloading of a tracing program) - I also added my HID Surface Dial example that I use locally to provide a fuller example to users Cheers, Benjamin Benjamin Tissoires (23): selftests/bpf: fix config for CLS_BPF bpf/verifier: allow kfunc to read user provided context bpf/verifier: do not clear meta in check_mem_size selftests/bpf: add test for accessing ctx from syscall program type bpf/verifier: allow kfunc to return an allocated mem selftests/bpf: Add tests for kfunc returning a memory pointer bpf: prepare for more bpf syscall to be used from kernel and user space. libbpf: add map_get_fd_by_id and map_delete_elem in light skeleton HID: core: store the unique system identifier in hid_device HID: export hid_report_type to uapi HID: convert defines of HID class requests into a proper enum HID: initial BPF implementation selftests/bpf: add tests for the HID-bpf initial implementation HID: bpf: allocate data memory for device_event BPF programs selftests/bpf/hid: add test to change the report size HID: bpf: introduce hid_hw_request() selftests/bpf: add tests for bpf_hid_hw_request HID: bpf: allow to change the report descriptor selftests/bpf: add report descriptor fixup tests selftests/bpf: Add a test for BPF_F_INSERT_HEAD samples/bpf: add new hid_mouse example HID: bpf: add Surface Dial example Documentation: add HID-BPF docs Documentation/hid/hid-bpf.rst | 512 +++++++++ Documentation/hid/index.rst | 1 + drivers/hid/Kconfig | 2 + drivers/hid/Makefile | 2 + drivers/hid/bpf/Kconfig | 19 + drivers/hid/bpf/Makefile | 11 + drivers/hid/bpf/entrypoints/Makefile | 88 ++ drivers/hid/bpf/entrypoints/README | 4 + drivers/hid/bpf/entrypoints/entrypoints.bpf.c | 66 ++ .../hid/bpf/entrypoints/entrypoints.lskel.h | 682 ++++++++++++ drivers/hid/bpf/hid_bpf_dispatch.c | 554 ++++++++++ drivers/hid/bpf/hid_bpf_dispatch.h | 28 + drivers/hid/bpf/hid_bpf_jmp_table.c | 577 ++++++++++ drivers/hid/hid-core.c | 49 +- include/linux/bpf.h | 10 +- include/linux/btf.h | 14 + include/linux/hid.h | 38 +- include/linux/hid_bpf.h | 145 +++ include/uapi/linux/hid.h | 26 +- include/uapi/linux/hid_bpf.h | 25 + kernel/bpf/btf.c | 67 +- kernel/bpf/syscall.c | 10 +- kernel/bpf/verifier.c | 67 +- net/bpf/test_run.c | 23 + samples/bpf/.gitignore | 2 + samples/bpf/Makefile | 27 + samples/bpf/hid_mouse.bpf.c | 134 +++ samples/bpf/hid_mouse.c | 150 +++ samples/bpf/hid_surface_dial.bpf.c | 161 +++ samples/bpf/hid_surface_dial.c | 216 ++++ tools/include/uapi/linux/hid.h | 62 ++ tools/include/uapi/linux/hid_bpf.h | 25 + tools/lib/bpf/skel_internal.h | 23 + tools/testing/selftests/bpf/Makefile | 5 +- tools/testing/selftests/bpf/config | 5 +- tools/testing/selftests/bpf/prog_tests/hid.c | 990 ++++++++++++++++++ .../selftests/bpf/prog_tests/kfunc_call.c | 68 ++ tools/testing/selftests/bpf/progs/hid.c | 206 ++++ .../selftests/bpf/progs/kfunc_call_test.c | 116 ++ 39 files changed, 5150 insertions(+), 60 deletions(-) create mode 100644 Documentation/hid/hid-bpf.rst create mode 100644 drivers/hid/bpf/Kconfig create mode 100644 drivers/hid/bpf/Makefile create mode 100644 drivers/hid/bpf/entrypoints/Makefile create mode 100644 drivers/hid/bpf/entrypoints/README create mode 100644 drivers/hid/bpf/entrypoints/entrypoints.bpf.c create mode 100644 drivers/hid/bpf/entrypoints/entrypoints.lskel.h create mode 100644 drivers/hid/bpf/hid_bpf_dispatch.c create mode 100644 drivers/hid/bpf/hid_bpf_dispatch.h create mode 100644 drivers/hid/bpf/hid_bpf_jmp_table.c create mode 100644 include/linux/hid_bpf.h create mode 100644 include/uapi/linux/hid_bpf.h create mode 100644 samples/bpf/hid_mouse.bpf.c create mode 100644 samples/bpf/hid_mouse.c create mode 100644 samples/bpf/hid_surface_dial.bpf.c create mode 100644 samples/bpf/hid_surface_dial.c create mode 100644 tools/include/uapi/linux/hid.h create mode 100644 tools/include/uapi/linux/hid_bpf.h create mode 100644 tools/testing/selftests/bpf/prog_tests/hid.c create mode 100644 tools/testing/selftests/bpf/progs/hid.c -- 2.36.1

2 years, 11 months

7
50
0 0

[PATCH v4] KVM: selftests: Fix target thread to be migrated in rseq_test

by Gavin Shan

In rseq_test, there are two threads, which are vCPU thread and migration worker separately. Unfortunately, the test has the wrong PID passed to sched_setaffinity() in the migration worker. It forces migration on the migration worker because zeroed PID represents the calling thread, which is the migration worker itself. It means the vCPU thread is never enforced to migration and it can migrate at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; do \ echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 Fix the issue by passing correct parameter, TID of the vCPU thread, to sched_setaffinity() in the migration worker. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Suggested-by: Sean Christopherson <seanjc(a)google.com> Signed-off-by: Gavin Shan <gshan(a)redhat.com> Reviewed-by: Oliver Upton <oliver.upton(a)linux.dev> --- v4: Pick the code change as Sean suggested. --- tools/testing/selftests/kvm/rseq_test.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..2237d1aac801 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -82,8 +82,9 @@ static int next_cpu(int cpu) return cpu; } -static void *migration_worker(void *ign) +static void *migration_worker(void *__rseq_tid) { + pid_t rseq_tid = (pid_t)(unsigned long)__rseq_tid; cpu_set_t allowed_mask; int r, i, cpu; @@ -106,7 +107,7 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,7 +232,8 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); - pthread_create(&migration_thread, NULL, migration_worker, 0); + pthread_create(&migration_thread, NULL, migration_worker, + (void *)(unsigned long)gettid()); for (i = 0; !done; i++) { vcpu_run(vm, VCPU_ID); -- 2.23.0

2 years, 11 months

3
2
0 0

[PATCH] KVM: selftests: fix bit test in is_steal_time_supported()

by Dan Carpenter

The KVM_FEATURE_STEAL_TIME (5) define is the BIT() value so we need to do shift for this to work correctly. Fixes: 998016048221 ("KVM: selftests: Convert steal_time away from VCPU_ID") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- tools/testing/selftests/kvm/steal_time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/steal_time.c b/tools/testing/selftests/kvm/steal_time.c index d122f1e05cdd..b89f0cfa2dc3 100644 --- a/tools/testing/selftests/kvm/steal_time.c +++ b/tools/testing/selftests/kvm/steal_time.c @@ -62,7 +62,7 @@ static bool is_steal_time_supported(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *cpuid = kvm_get_supported_cpuid_entry(KVM_CPUID_FEATURES); - return cpuid && (cpuid->eax & KVM_FEATURE_STEAL_TIME); + return cpuid && (cpuid->eax & (1 << KVM_FEATURE_STEAL_TIME)); } static void steal_time_init(struct kvm_vcpu *vcpu, uint32_t i) -- 2.35.1

2 years, 11 months

2
1
0 0

[bug report] kselftest/arm64: Add utilities and a test to validate mte memory

by Dan Carpenter

Hello Amit Daniel Kachhap, The patch e9b60476bea0: "kselftest/arm64: Add utilities and a test to validate mte memory" from Oct 2, 2020, leads to the following Smatch static checker warning: ./tools/testing/selftests/arm64/mte/mte_common_util.c:336 mte_default_setup() warn: bitwise AND condition is false here ./tools/testing/selftests/arm64/mte/mte_common_util.c 316 int mte_default_setup(void) 317 { 318 unsigned long hwcaps2 = getauxval(AT_HWCAP2); 319 unsigned long en = 0; 320 int ret; 321 322 if (!(hwcaps2 & HWCAP2_MTE)) { 323 ksft_print_msg("SKIP: MTE features unavailable\n"); 324 return KSFT_SKIP; 325 } 326 /* Get current mte mode */ 327 ret = prctl(PR_GET_TAGGED_ADDR_CTRL, en, 0, 0, 0); 328 if (ret < 0) { 329 ksft_print_msg("FAIL:prctl PR_GET_TAGGED_ADDR_CTRL with error =%d\n", ret); 330 return KSFT_FAIL; 331 } 332 if (ret & PR_MTE_TCF_SYNC) 333 mte_cur_mode = MTE_SYNC_ERR; 334 else if (ret & PR_MTE_TCF_ASYNC) 335 mte_cur_mode = MTE_ASYNC_ERR; --> 336 else if (ret & PR_MTE_TCF_NONE) It looks like the intent was to make PR_MTE_TCF_NONE into an ifdef configurable thing but that never happened? 337 mte_cur_mode = MTE_NONE_ERR; 338 339 mte_cur_pstate_tco = mte_get_pstate_tco(); 340 /* Disable PSTATE.TCO */ 341 mte_disable_pstate_tco(); 342 return 0; 343 } regards, dan carpenter

2 years, 11 months

2
1
0 0

[PATCH] ksefltest: pidfd: Fix wait_states: Test terminated by timeout

by lizhijian＠fujitsu.com

0Day/LKP observed that the kselftest blocks forever since one of the pidfd_wait doesn't terminate in 1 of 30 runs. After digging into the source, we found that it blocks at: ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0); wait_states has below testing flow: CHILD PARENT ---------------+-------------- 1 STOP itself 2 WAIT for CHILD STOPPED 3 SIGNAL CHILD to CONT 4 CONT 5 STOP itself 5' WAIT for CHILD CONT 6 WAIT for CHILD STOPPED The problem is that the kernel cannot ensure the order of 5 and 5', once 5's goes first, the test will fail. we can reproduce it by: $ while true; do make run_tests -C pidfd; done Introduce a blocking read in child process to make sure the parent can check its WCONTINUED. CC: Philip Li <philip.li(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- I have almost forgotten this patch since the former version post over 6 months ago. This time I just do a rebase and update the comments. V2: rewrite with pipe to avoid usleep --- tools/testing/selftests/pidfd/pidfd_wait.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index 070c1c876df1..3f7bc6517dea 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -95,20 +95,27 @@ TEST(wait_states) .flags = CLONE_PIDFD | CLONE_PARENT_SETTID, .exit_signal = SIGCHLD, }; + int ret, pfd[2]; pid_t pid; siginfo_t info = { .si_signo = 0, }; + ASSERT_EQ(pipe(pfd), 0); pid = sys_clone3(&args); ASSERT_GE(pid, 0); if (pid == 0) { + char buf[2]; + close(pfd[1]); kill(getpid(), SIGSTOP); + ASSERT_EQ(read(pfd[0], buf, 1), 1); + close(pfd[0]); kill(getpid(), SIGSTOP); exit(EXIT_SUCCESS); } + close(pfd[0]); ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WSTOPPED, NULL), 0); ASSERT_EQ(info.si_signo, SIGCHLD); ASSERT_EQ(info.si_code, CLD_STOPPED); @@ -117,6 +124,8 @@ TEST(wait_states) ASSERT_EQ(sys_pidfd_send_signal(pidfd, SIGCONT, NULL, 0), 0); ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0); + ASSERT_EQ(write(pfd[1], "C", 1), 1); + close(pfd[1]); ASSERT_EQ(info.si_signo, SIGCHLD); ASSERT_EQ(info.si_code, CLD_CONTINUED); ASSERT_EQ(info.si_pid, parent_tid); -- 2.36.0

2 years, 11 months

2
2
0 0

[PATCH] selftests:Unneeded semicolon

by Xin Gao

Unneeded semicolon Signed-off-by: Xin Gao <gaoxin(a)cdjrlc.com> --- tools/testing/selftests/timers/nsleep-lat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c index eb3e79ed7b4a..a7ca9825e106 100644 --- a/tools/testing/selftests/timers/nsleep-lat.c +++ b/tools/testing/selftests/timers/nsleep-lat.c @@ -72,7 +72,7 @@ char *clockstring(int clockid) return "CLOCK_BOOTTIME_ALARM"; case CLOCK_TAI: return "CLOCK_TAI"; - }; + } return "UNKNOWN_CLOCKID"; } -- 2.30.2

2 years, 11 months

1
0
0 0

[PATCH] selftests:Unneeded semicolon

by Xin Gao

Unneeded semicolon Signed-off-by: Xin Gao <gaoxin(a)cdjrlc.com> --- tools/testing/selftests/timers/nanosleep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c index 71b5441c2fd9..433a09676aeb 100644 --- a/tools/testing/selftests/timers/nanosleep.c +++ b/tools/testing/selftests/timers/nanosleep.c @@ -72,7 +72,7 @@ char *clockstring(int clockid) return "CLOCK_BOOTTIME_ALARM"; case CLOCK_TAI: return "CLOCK_TAI"; - }; + } return "UNKNOWN_CLOCKID"; } -- 2.30.2

2 years, 11 months

1
0
0 0

[PATCH v3] KVM: selftests: Fix target thread to be migrated in rseq_test

by Gavin Shan

In rseq_test, there are two threads, which are vCPU thread and migration worker separately. Unfortunately, the test has the wrong PID passed to sched_setaffinity() in the migration worker. It forces migration on the migration worker because zeroed PID represents the calling thread, which is the migration worker itself. It means the vCPU thread is never enforced to migration and it can migrate at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; do \ echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 Fix the issue by passing correct parameter, TID of the vCPU thread, to sched_setaffinity() in the migration worker. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> Reviewed-by: Oliver Upton <oliver.upton(a)linux.dev> --- v3: Improved changelog (Oliver Upon) --- tools/testing/selftests/kvm/rseq_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..c83ac7b467f8 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -38,6 +38,7 @@ static __thread volatile struct rseq __rseq = { */ #define NR_TASK_MIGRATIONS 100000 +static pid_t rseq_tid; static pthread_t migration_thread; static cpu_set_t possible_mask; static int min_cpu, max_cpu; @@ -106,7 +107,8 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), + &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,6 +233,7 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); + rseq_tid = gettid(); pthread_create(&migration_thread, NULL, migration_worker, 0); for (i = 0; !done; i++) { -- 2.23.0

2 years, 11 months

2
2
0 0

[PATCH] tools: Change the division operator to a right shift operator

by Lv qian

Change the division operator to a right shift operator,Reduced assembly code. Signed-off-by: Lv qian <lvqian(a)nfschina.com> --- tools/testing/selftests/size/get_size.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/size/get_size.c b/tools/testing/selftests/size/get_size.c index 2980b1a63366..b1e34408f8c6 100644 --- a/tools/testing/selftests/size/get_size.c +++ b/tools/testing/selftests/size/get_size.c @@ -73,7 +73,7 @@ static int print_k_value(const char *s, unsigned long num, unsigned long units) print(s); temp = num; - temp = (temp * units)/1024; + temp = (temp * units)>>10; num = temp; ccode = print_num(num); print("\n"); -- 2.18.2

2 years, 11 months

1
0
0 0

[PATCH v2] KVM: selftests: Fix target thread to be migrated in rseq_test

by Gavin Shan

In rseq_test, there are two threads, which are thread group leader and migration worker. The migration worker relies on sched_setaffinity() to force migration on the thread group leader. Unfortunately, we have wrong parameter (0) passed to sched_getaffinity(). It's actually forcing migration on the migration worker instead of the thread group leader. It also means migration can happen on the thread group leader at any time, which eventually leads to failure as the following logs show. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; \ do echo "--------> $i"; ./rseq_test; done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 This fixes the issue by passing correct parameter, tid of the group thread leader, to sched_setaffinity(). Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> --- tools/testing/selftests/kvm/rseq_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..c83ac7b467f8 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -38,6 +38,7 @@ static __thread volatile struct rseq __rseq = { */ #define NR_TASK_MIGRATIONS 100000 +static pid_t rseq_tid; static pthread_t migration_thread; static cpu_set_t possible_mask; static int min_cpu, max_cpu; @@ -106,7 +107,8 @@ static void *migration_worker(void *ign) * stable, i.e. while changing affinity is in-progress. */ smp_wmb(); - r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask); + r = sched_setaffinity(rseq_tid, sizeof(allowed_mask), + &allowed_mask); TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)", errno, strerror(errno)); smp_wmb(); @@ -231,6 +233,7 @@ int main(int argc, char *argv[]) vm = vm_create_default(VCPU_ID, 0, guest_code); ucall_init(vm, NULL); + rseq_tid = gettid(); pthread_create(&migration_thread, NULL, migration_worker, 0); for (i = 0; !done; i++) { -- 2.23.0

2 years, 11 months

2
3
0 0

Hi Dear,

by Lily William

Hi Dear, My name is Dr Lily William from the United States.I am a French and American nationality (dual) living in the U.S and sometimes in France for Work Purpose. I hope you consider my friend request. I will share some of my pics and more details about myself when I get your response. Thanks With love Lily

2 years, 11 months

1
0
0 0

Re: linux-next: Tree for Jul 18 (ne_misc_dev.c)

by Randy Dunlap

On 7/18/22 04:02, Stephen Rothwell wrote: > Hi all, > > Changes since 20220715: > on x86_64: vmlinux.o: in function `ne_misc_dev_test_merge_phys_contig_memory_regions': ne_misc_dev.c:(.text+0x88eae7): undefined reference to `kunit_kmalloc_array' ld: ne_misc_dev.c:(.text+0x88eafd): undefined reference to `kunit_unary_assert_format' ld: ne_misc_dev.c:(.text+0x88eb25): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ec0c): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ec3c): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ec58): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ec88): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ecc2): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ecf2): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ed19): undefined reference to `kunit_binary_assert_format' ld: ne_misc_dev.c:(.text+0x88ed49): undefined reference to `kunit_do_failed_assertion' ld: ne_misc_dev.c:(.text+0x88ed7e): undefined reference to `kunit_kfree' Full randconfig file is attached. -- ~Randy

2 years, 11 months

1
0
0 0

Re: FAIL: alsa/Makefile dependency check

by Mark Brown

On Sat, Jul 16, 2022 at 09:14:08AM +0800, li_jessen2016(a)gmail.com li wrote: > Thanks for your kind reply. Then what should I do? To officially raise a > bug to all the relevant persons in the kernel community? Yeah, I'd figure out who works on the script and mail them about it (or develop a patch if you feel up to it!).

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 1f2f341a62639c7066ee4c76b7d9ebe867e0a1d5 ] This should be a bit more stable hopefully. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/wireguard/qemu/Makefile | 5 +++-- tools/testing/selftests/wireguard/qemu/arch/m68k.config | 9 +++------ 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile index bca07b93eeb0..e8a82e495d2e 100644 --- a/tools/testing/selftests/wireguard/qemu/Makefile +++ b/tools/testing/selftests/wireguard/qemu/Makefile @@ -210,10 +210,11 @@ QEMU_ARCH := m68k KERNEL_ARCH := m68k KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=$.*$/\1/p' arch/m68k.config) +QEMU_VPORT_RESULT := virtio-serial-device ifeq ($(HOST_ARCH),$(ARCH)) -QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE) +QEMU_MACHINE := -cpu host,accel=kvm -machine virt -append $(KERNEL_CMDLINE) else -QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE) +QEMU_MACHINE := -machine virt -smp 1 -append $(KERNEL_CMDLINE) endif else ifeq ($(ARCH),riscv64) CHOST := riscv64-linux-musl diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config index 9639bfe06074..39c48cba56b7 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config @@ -1,10 +1,7 @@ CONFIG_MMU=y +CONFIG_VIRT=y CONFIG_M68KCLASSIC=y -CONFIG_M68040=y -CONFIG_MAC=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" +CONFIG_CMDLINE="console=ttyGF0 wg.success=vport0p1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 -- 2.35.1

2 years, 11 months

2
3
0 0

[PATCH] KVM: selftests: Double check on the current CPU in rseq_test

by Gavin Shan

In rseq_test, there are two threads created. Those two threads are 'main' and 'migration_thread' separately. We also have the assumption that non-migration status on 'migration-worker' thread guarantees the same non-migration status on 'main' thread. Unfortunately, the assumption isn't true. The 'main' thread can be migrated from one CPU to another one between the calls to sched_getcpu() and READ_ONCE(__rseq.cpu_id). The following assert is raised eventually because of the mismatched CPU numbers. The issue can be reproduced on arm64 system occasionally. host# uname -r 5.19.0-rc6-gavin+ host# # cat /proc/cpuinfo | grep processor | tail -n 1 processor : 223 host# pwd /home/gavin/sandbox/linux.main/tools/testing/selftests/kvm host# for i in `seq 1 100`; \ do echo "--------> $i"; \ ./rseq_test; sleep 3; \ done --------> 1 --------> 2 --------> 3 --------> 4 --------> 5 --------> 6 ==== Test Assertion Failure ==== rseq_test.c:265: rseq_cpu == cpu pid=3925 tid=3925 errno=4 - Interrupted system call 1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2) 2 0x0000ffffb044affb: ?? ??:0 3 0x0000ffffb044b0c7: ?? ??:0 4 0x0000000000401a6f: _start at ??:? rseq CPU = 4, sched CPU = 27 This fixes the issue by double-checking on the current CPU after call to READ_ONCE(__rseq.cpu_id) and restarting the test if the two consecutive CPU numbers aren't euqal. Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Signed-off-by: Gavin Shan <gshan(a)redhat.com> --- tools/testing/selftests/kvm/rseq_test.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 4158da0da2bb..74709dd9f5b2 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -207,7 +207,7 @@ int main(int argc, char *argv[]) { int r, i, snapshot; struct kvm_vm *vm; - u32 cpu, rseq_cpu; + u32 cpu, rseq_cpu, last_cpu; /* Tell stdout not to buffer its content */ setbuf(stdout, NULL); @@ -259,8 +259,9 @@ int main(int argc, char *argv[]) smp_rmb(); cpu = sched_getcpu(); rseq_cpu = READ_ONCE(__rseq.cpu_id); + last_cpu = sched_getcpu(); smp_rmb(); - } while (snapshot != atomic_read(&seq_cnt)); + } while (snapshot != atomic_read(&seq_cnt) || cpu != last_cpu); TEST_ASSERT(rseq_cpu == cpu, "rseq CPU = %d, sched CPU = %d\n", rseq_cpu, cpu); -- 2.23.0

2 years, 11 months

3
7
0 0

[PATCH v7 00/25] Rust support

by Miguel Ojeda

Rust support This is the patch series (v7) to add support for Rust as a second language to the Linux kernel. If you are interested in following this effort, please join us in the mailing list at: rust-for-linux(a)vger.kernel.org and take a look at the project itself at: https://github.com/Rust-for-Linux As usual, special thanks go to ISRG (Internet Security Research Group) and Google for their financial support on this endeavor. Cheers, Miguel -- # Rust support This cover letter explains the major changes and updates done since the previous ones. For those, please see: RFC: https://lore.kernel.org/lkml/20210414184604.23473-1-ojeda@kernel.org/ v1: https://lore.kernel.org/lkml/20210704202756.29107-1-ojeda@kernel.org/ v2: https://lore.kernel.org/lkml/20211206140313.5653-1-ojeda@kernel.org/ v3: https://lore.kernel.org/lkml/20220117053349.6804-1-ojeda@kernel.org/ v4: https://lore.kernel.org/lkml/20220212130410.6901-1-ojeda@kernel.org/ v5: https://lore.kernel.org/lkml/20220317181032.15436-1-ojeda@kernel.org/ v6: https://lore.kernel.org/lkml/20220507052451.12890-1-ojeda@kernel.org/ This is a small round to address the comments made in v6 plus a few related changes: - Added `%pA` to `Documentation/core-api/printk-formats.rst`. - Added `checkpatch.pl` patch to search for `%pA` in C code. - Added `checkpatch.pl` patch to enable language-independent checks. - Added UML (x86_64) support, for KUnit (thanks David Gow!). - Added inline licensing information ("Apache-2.0 OR MIT") in the commit message of the `alloc` patch, as well as in `rust/alloc/README.md` in the following patch. - Added SPDX license identifiers to `Documentation/rust/`. - Reformatted `Documentation/rust/arch-support.rst` list table into simple table. - Removed logo from documentation patch; used Linux GIF one for the Rust generated docs in its place (to be replaced with the SVG one once available). - Used `"GPL"` instead of `"GPL v2"` for the `license` field of the `module!` macro. - Moved `module_misc_device!` macro in `samples/rust/rust_random.rs` to the top of the file in `samples/rust/` for consistency. - Sorted `#include` lists in `rust/kernel/bindings_helper.h` and `rust/helpers.c`. - Fixed some English typos. - Made the patches more `checkpatch.pl`-clean overall. - Picked up Reviewed-by and Acked-by tags. ## Patch series status The Rust support is still to be considered experimental. However, support is good enough that kernel developers can start working on the Rust abstractions for subsystems and write drivers and other modules. The current series has just arrived in `linux-next`, as usual. Similarly, the preview docs for this series can be seen at: https://rust-for-linux.github.io/docs/kernel/ As usual, please see the following link for the live list of unstable Rust features we are using: https://github.com/Rust-for-Linux/linux/issues/2 ## Conferences, meetings and liaisons We would like to remind everyone about the Rust MC (microconference) of LPC 2022 (Linux Plumbers Conference): https://lpc.events/event/16/contributions/1159/ The Rust MC intends to cover talks and discussions on both Rust for Linux as well as other non-kernel Rust topics. The Call for Proposals is open! ## Acknowledgements The signatures in the main commits correspond to the people that wrote code that has ended up in them at the present time. For details on contributions to code and discussions, please see our repository: https://github.com/Rust-for-Linux/linux However, we would like to give credit to everyone that has contributed in one way or another to the Rust for Linux project. Since the previous cover letter: - Kees Cook for his reviews of some of the v6 patches. - David Gow and Brendan Higgins for their reviews of the KUnit prerequisite patch and their feedback. - Jonathan Corbet and Akira Yokosawa for their review of the documentation patch and feedback on documentation rules. - Gary Guo for working on improvements to the Rust compiler that could make our `static_assert!` macro applicable in more cases. - bjorn3 for working on making `rustc_parse_format` compile on a stable Rust compiler so that it may be used by lightweight formatting systems (for instance, by the kernel). - As usual, bjorn3 and Gary Guo for all the input on Rust compiler details, reviews and suggestions. - Esteban Blanc, Arthur Cohen and Martin Schmidt for rebasing their SPI abstraction work. - Maciej Falkowski for continuing his work on the Samsung Exynos TRNG driver and the required abstractions around it, such as adding `delay`, `ktime` and `iopoll` abstractions, new methods to `platform::Device` and run-time power management abstractions. - Yuheng Su for working on cleaning up the `Module::init` interface. - Peng Hao for working on wrapping `mm_struct`. - Sergio González Collado for continuing his work on the GitHub CI problem matchers. - Wei Liu for taking the time to answer questions from newcomers in Zulip. - Philip Li, Yujie Liu et al. for continuing their work on adding Rust support to the Intel 0DAY/LKP kernel test robot. - Philip Herron and Arthur Cohen (and his supporters Open Source Security and Embecosm) et al. for their ongoing work on GCC Rust. - Antoni Boucher (and his supporters) et al. for their ongoing work on `rustc_codegen_gcc`. - Mats Larsen, Marc Poulhiès et al. for their ongoing work on improving Rust support in Compiler Explorer. - Many folks that have reported issues, tested the project, helped spread the word, joined discussions and contributed in other ways! Please see also the acknowledgements on the previous cover letters. Boqun Feng (1): kallsyms: avoid hardcoding the buffer size Gary Guo (2): rust: add `build_error` crate vsprintf: add new `%pA` format specifier Miguel Ojeda (18): kallsyms: support "big" kernel symbols kallsyms: increase maximum kernel symbol length to 512 kunit: take `kunit_assert` as `const` rust: add C helpers rust: add `compiler_builtins` crate rust: import upstream `alloc` crate rust: adapt `alloc` crate to the kernel rust: add `macros` crate rust: export generated symbols scripts: checkpatch: diagnose uses of `%pA` in the C side scripts: checkpatch: enable language-independent checks for Rust scripts: add `rustdoc_test_{builder,gen}.py` scripts scripts: add `generate_rust_analyzer.py` scripts scripts: decode_stacktrace: demangle Rust symbols docs: add Rust documentation Kbuild: add Rust support samples: add Rust examples MAINTAINERS: Rust Wedson Almeida Filho (4): rust: add `kernel` crate's `sync` module rust: add `kernel` crate [RFC] drivers: gpio: PrimeCell PL061 in Rust [RFC] drivers: android: Binder IPC in Rust .gitignore | 5 + .rustfmt.toml | 12 + Documentation/core-api/printk-formats.rst | 10 + Documentation/doc-guide/kernel-doc.rst | 3 + Documentation/index.rst | 1 + Documentation/kbuild/kbuild.rst | 17 + Documentation/kbuild/makefiles.rst | 50 +- Documentation/process/changes.rst | 41 + Documentation/rust/arch-support.rst | 25 + Documentation/rust/coding-guidelines.rst | 216 ++ Documentation/rust/general-information.rst | 79 + Documentation/rust/index.rst | 22 + Documentation/rust/quick-start.rst | 232 ++ MAINTAINERS | 15 + Makefile | 175 +- arch/Kconfig | 6 + arch/arm/Kconfig | 1 + arch/arm64/Kconfig | 1 + arch/powerpc/Kconfig | 1 + arch/riscv/Kconfig | 1 + arch/riscv/Makefile | 5 + arch/um/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/Makefile | 14 + drivers/android/Kconfig | 6 + drivers/android/Makefile | 2 + drivers/android/allocation.rs | 266 ++ drivers/android/context.rs | 80 + drivers/android/defs.rs | 99 + drivers/android/node.rs | 476 +++ drivers/android/process.rs | 960 +++++ drivers/android/range_alloc.rs | 189 + drivers/android/rust_binder.rs | 111 + drivers/android/thread.rs | 870 +++++ drivers/android/transaction.rs | 326 ++ drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio_pl061_rust.rs | 370 ++ include/kunit/test.h | 2 +- include/linux/kallsyms.h | 2 +- include/linux/spinlock.h | 25 +- include/uapi/linux/android/binder.h | 28 +- init/Kconfig | 45 +- kernel/kallsyms.c | 26 +- kernel/livepatch/core.c | 4 +- lib/Kconfig.debug | 155 + lib/kunit/test.c | 4 +- lib/vsprintf.c | 13 + rust/.gitignore | 10 + rust/Makefile | 398 +++ rust/alloc/README.md | 33 + rust/alloc/alloc.rs | 438 +++ rust/alloc/borrow.rs | 498 +++ rust/alloc/boxed.rs | 2007 +++++++++++ rust/alloc/collections/mod.rs | 156 + rust/alloc/fmt.rs | 601 ++++ rust/alloc/lib.rs | 226 ++ rust/alloc/macros.rs | 127 + rust/alloc/raw_vec.rs | 567 +++ rust/alloc/slice.rs | 1282 +++++++ rust/alloc/str.rs | 632 ++++ rust/alloc/string.rs | 2869 +++++++++++++++ rust/alloc/vec/drain.rs | 186 + rust/alloc/vec/drain_filter.rs | 145 + rust/alloc/vec/into_iter.rs | 356 ++ rust/alloc/vec/is_zero.rs | 106 + rust/alloc/vec/mod.rs | 3362 ++++++++++++++++++ rust/alloc/vec/partial_eq.rs | 49 + rust/alloc/vec/set_len_on_drop.rs | 30 + rust/alloc/vec/spec_extend.rs | 174 + rust/bindgen_parameters | 17 + rust/build_error.rs | 29 + rust/compiler_builtins.rs | 57 + rust/exports.c | 20 + rust/helpers.c | 644 ++++ rust/kernel/allocator.rs | 65 + rust/kernel/amba.rs | 257 ++ rust/kernel/bindings.rs | 47 + rust/kernel/bindings_helper.h | 46 + rust/kernel/build_assert.rs | 82 + rust/kernel/c_types.rs | 119 + rust/kernel/chrdev.rs | 207 ++ rust/kernel/clk.rs | 79 + rust/kernel/cred.rs | 46 + rust/kernel/device.rs | 546 +++ rust/kernel/driver.rs | 442 +++ rust/kernel/error.rs | 565 +++ rust/kernel/file.rs | 860 +++++ rust/kernel/gpio.rs | 478 +++ rust/kernel/hwrng.rs | 242 ++ rust/kernel/io_buffer.rs | 153 + rust/kernel/io_mem.rs | 275 ++ rust/kernel/iov_iter.rs | 81 + rust/kernel/irq.rs | 411 +++ rust/kernel/kasync.rs | 6 + rust/kernel/kasync/net.rs | 322 ++ rust/kernel/kunit.rs | 91 + rust/kernel/lib.rs | 261 ++ rust/kernel/linked_list.rs | 247 ++ rust/kernel/miscdev.rs | 291 ++ rust/kernel/mm.rs | 149 + rust/kernel/module_param.rs | 498 +++ rust/kernel/net.rs | 392 ++ rust/kernel/net/filter.rs | 447 +++ rust/kernel/of.rs | 63 + rust/kernel/pages.rs | 144 + rust/kernel/platform.rs | 223 ++ rust/kernel/power.rs | 118 + rust/kernel/prelude.rs | 36 + rust/kernel/print.rs | 405 +++ rust/kernel/random.rs | 42 + rust/kernel/raw_list.rs | 361 ++ rust/kernel/rbtree.rs | 563 +++ rust/kernel/revocable.rs | 161 + rust/kernel/security.rs | 38 + rust/kernel/static_assert.rs | 38 + rust/kernel/std_vendor.rs | 160 + rust/kernel/str.rs | 597 ++++ rust/kernel/sync.rs | 161 + rust/kernel/sync/arc.rs | 503 +++ rust/kernel/sync/condvar.rs | 138 + rust/kernel/sync/guard.rs | 169 + rust/kernel/sync/locked_by.rs | 111 + rust/kernel/sync/mutex.rs | 153 + rust/kernel/sync/nowait.rs | 188 + rust/kernel/sync/revocable.rs | 250 ++ rust/kernel/sync/rwsem.rs | 197 + rust/kernel/sync/seqlock.rs | 202 ++ rust/kernel/sync/smutex.rs | 295 ++ rust/kernel/sync/spinlock.rs | 360 ++ rust/kernel/sysctl.rs | 199 ++ rust/kernel/task.rs | 175 + rust/kernel/types.rs | 679 ++++ rust/kernel/user_ptr.rs | 175 + rust/macros/helpers.rs | 79 + rust/macros/lib.rs | 94 + rust/macros/module.rs | 631 ++++ samples/Kconfig | 2 + samples/Makefile | 1 + samples/rust/Kconfig | 140 + samples/rust/Makefile | 16 + samples/rust/hostprogs/.gitignore | 3 + samples/rust/hostprogs/Makefile | 5 + samples/rust/hostprogs/a.rs | 7 + samples/rust/hostprogs/b.rs | 5 + samples/rust/hostprogs/single.rs | 12 + samples/rust/rust_chrdev.rs | 50 + samples/rust/rust_minimal.rs | 35 + samples/rust/rust_miscdev.rs | 143 + samples/rust/rust_module_parameters.rs | 69 + samples/rust/rust_netfilter.rs | 54 + samples/rust/rust_platform.rs | 22 + samples/rust/rust_print.rs | 54 + samples/rust/rust_random.rs | 60 + samples/rust/rust_semaphore.rs | 171 + samples/rust/rust_semaphore_c.c | 212 ++ samples/rust/rust_stack_probing.rs | 36 + samples/rust/rust_sync.rs | 93 + scripts/.gitignore | 1 + scripts/Kconfig.include | 6 +- scripts/Makefile | 3 + scripts/Makefile.build | 60 + scripts/Makefile.debug | 10 + scripts/Makefile.host | 34 +- scripts/Makefile.lib | 12 + scripts/Makefile.modfinal | 8 +- scripts/cc-version.sh | 12 +- scripts/checkpatch.pl | 8 +- scripts/decode_stacktrace.sh | 14 + scripts/generate_rust_analyzer.py | 134 + scripts/generate_rust_target.rs | 227 ++ scripts/is_rust_module.sh | 13 + scripts/kallsyms.c | 47 +- scripts/kconfig/confdata.c | 75 + scripts/min-tool-version.sh | 6 + scripts/rust-is-available-bindgen-libclang.h | 2 + scripts/rust-is-available.sh | 158 + scripts/rustdoc_test_builder.py | 59 + scripts/rustdoc_test_gen.py | 164 + tools/include/linux/kallsyms.h | 2 +- tools/lib/perf/include/perf/event.h | 2 +- tools/lib/symbol/kallsyms.h | 2 +- 182 files changed, 37614 insertions(+), 69 deletions(-) create mode 100644 .rustfmt.toml create mode 100644 Documentation/rust/arch-support.rst create mode 100644 Documentation/rust/coding-guidelines.rst create mode 100644 Documentation/rust/general-information.rst create mode 100644 Documentation/rust/index.rst create mode 100644 Documentation/rust/quick-start.rst create mode 100644 drivers/android/allocation.rs create mode 100644 drivers/android/context.rs create mode 100644 drivers/android/defs.rs create mode 100644 drivers/android/node.rs create mode 100644 drivers/android/process.rs create mode 100644 drivers/android/range_alloc.rs create mode 100644 drivers/android/rust_binder.rs create mode 100644 drivers/android/thread.rs create mode 100644 drivers/android/transaction.rs create mode 100644 drivers/gpio/gpio_pl061_rust.rs create mode 100644 rust/.gitignore create mode 100644 rust/Makefile create mode 100644 rust/alloc/README.md create mode 100644 rust/alloc/alloc.rs create mode 100644 rust/alloc/borrow.rs create mode 100644 rust/alloc/boxed.rs create mode 100644 rust/alloc/collections/mod.rs create mode 100644 rust/alloc/fmt.rs create mode 100644 rust/alloc/lib.rs create mode 100644 rust/alloc/macros.rs create mode 100644 rust/alloc/raw_vec.rs create mode 100644 rust/alloc/slice.rs create mode 100644 rust/alloc/str.rs create mode 100644 rust/alloc/string.rs create mode 100644 rust/alloc/vec/drain.rs create mode 100644 rust/alloc/vec/drain_filter.rs create mode 100644 rust/alloc/vec/into_iter.rs create mode 100644 rust/alloc/vec/is_zero.rs create mode 100644 rust/alloc/vec/mod.rs create mode 100644 rust/alloc/vec/partial_eq.rs create mode 100644 rust/alloc/vec/set_len_on_drop.rs create mode 100644 rust/alloc/vec/spec_extend.rs create mode 100644 rust/bindgen_parameters create mode 100644 rust/build_error.rs create mode 100644 rust/compiler_builtins.rs create mode 100644 rust/exports.c create mode 100644 rust/helpers.c create mode 100644 rust/kernel/allocator.rs create mode 100644 rust/kernel/amba.rs create mode 100644 rust/kernel/bindings.rs create mode 100644 rust/kernel/bindings_helper.h create mode 100644 rust/kernel/build_assert.rs create mode 100644 rust/kernel/c_types.rs create mode 100644 rust/kernel/chrdev.rs create mode 100644 rust/kernel/clk.rs create mode 100644 rust/kernel/cred.rs create mode 100644 rust/kernel/device.rs create mode 100644 rust/kernel/driver.rs create mode 100644 rust/kernel/error.rs create mode 100644 rust/kernel/file.rs create mode 100644 rust/kernel/gpio.rs create mode 100644 rust/kernel/hwrng.rs create mode 100644 rust/kernel/io_buffer.rs create mode 100644 rust/kernel/io_mem.rs create mode 100644 rust/kernel/iov_iter.rs create mode 100644 rust/kernel/irq.rs create mode 100644 rust/kernel/kasync.rs create mode 100644 rust/kernel/kasync/net.rs create mode 100644 rust/kernel/kunit.rs create mode 100644 rust/kernel/lib.rs create mode 100644 rust/kernel/linked_list.rs create mode 100644 rust/kernel/miscdev.rs create mode 100644 rust/kernel/mm.rs create mode 100644 rust/kernel/module_param.rs create mode 100644 rust/kernel/net.rs create mode 100644 rust/kernel/net/filter.rs create mode 100644 rust/kernel/of.rs create mode 100644 rust/kernel/pages.rs create mode 100644 rust/kernel/platform.rs create mode 100644 rust/kernel/power.rs create mode 100644 rust/kernel/prelude.rs create mode 100644 rust/kernel/print.rs create mode 100644 rust/kernel/random.rs create mode 100644 rust/kernel/raw_list.rs create mode 100644 rust/kernel/rbtree.rs create mode 100644 rust/kernel/revocable.rs create mode 100644 rust/kernel/security.rs create mode 100644 rust/kernel/static_assert.rs create mode 100644 rust/kernel/std_vendor.rs create mode 100644 rust/kernel/str.rs create mode 100644 rust/kernel/sync.rs create mode 100644 rust/kernel/sync/arc.rs create mode 100644 rust/kernel/sync/condvar.rs create mode 100644 rust/kernel/sync/guard.rs create mode 100644 rust/kernel/sync/locked_by.rs create mode 100644 rust/kernel/sync/mutex.rs create mode 100644 rust/kernel/sync/nowait.rs create mode 100644 rust/kernel/sync/revocable.rs create mode 100644 rust/kernel/sync/rwsem.rs create mode 100644 rust/kernel/sync/seqlock.rs create mode 100644 rust/kernel/sync/smutex.rs create mode 100644 rust/kernel/sync/spinlock.rs create mode 100644 rust/kernel/sysctl.rs create mode 100644 rust/kernel/task.rs create mode 100644 rust/kernel/types.rs create mode 100644 rust/kernel/user_ptr.rs create mode 100644 rust/macros/helpers.rs create mode 100644 rust/macros/lib.rs create mode 100644 rust/macros/module.rs create mode 100644 samples/rust/Kconfig create mode 100644 samples/rust/Makefile create mode 100644 samples/rust/hostprogs/.gitignore create mode 100644 samples/rust/hostprogs/Makefile create mode 100644 samples/rust/hostprogs/a.rs create mode 100644 samples/rust/hostprogs/b.rs create mode 100644 samples/rust/hostprogs/single.rs create mode 100644 samples/rust/rust_chrdev.rs create mode 100644 samples/rust/rust_minimal.rs create mode 100644 samples/rust/rust_miscdev.rs create mode 100644 samples/rust/rust_module_parameters.rs create mode 100644 samples/rust/rust_netfilter.rs create mode 100644 samples/rust/rust_platform.rs create mode 100644 samples/rust/rust_print.rs create mode 100644 samples/rust/rust_random.rs create mode 100644 samples/rust/rust_semaphore.rs create mode 100644 samples/rust/rust_semaphore_c.c create mode 100644 samples/rust/rust_stack_probing.rs create mode 100644 samples/rust/rust_sync.rs create mode 100755 scripts/generate_rust_analyzer.py create mode 100644 scripts/generate_rust_target.rs create mode 100755 scripts/is_rust_module.sh create mode 100644 scripts/rust-is-available-bindgen-libclang.h create mode 100755 scripts/rust-is-available.sh create mode 100755 scripts/rustdoc_test_builder.py create mode 100755 scripts/rustdoc_test_gen.py base-commit: 4b0986a3613c92f4ec1bdc7f60ec66fea135991f -- 2.36.1

2 years, 11 months

6
8
0 0

[PATCH v2] kcsan: test: Add a .kunitconfig to run KCSAN tests

by David Gow

Add a .kunitconfig file, which provides a default, working config for running the KCSAN tests. Note that it needs to run on an SMP machine, so to run under kunit_tool, the --qemu_args option should be used (on a supported architecture, like x86_64). For example: ./tools/testing/kunit/kunit.py run --arch=x86_64 --qemu_args='-smp 8' --kunitconfig=kernel/kcsan Signed-off-by: David Gow <davidgow(a)google.com> Reviewed-by: Marco Elver <elver(a)google.com> Acked-by: Brendan Higgins <brendanhiggins(a)google.com> --- kernel/kcsan/.kunitconfig | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 kernel/kcsan/.kunitconfig diff --git a/kernel/kcsan/.kunitconfig b/kernel/kcsan/.kunitconfig new file mode 100644 index 000000000000..e82f0f52ab0a --- /dev/null +++ b/kernel/kcsan/.kunitconfig @@ -0,0 +1,24 @@ +# Note that the KCSAN tests need to run on an SMP setup. +# Under kunit_tool, this can be done by using the --qemu_args +# option to configure a machine with several cores. For example: +# ./tools/testing/kunit/kunit.py run --kunitconfig=kernel/kcsan \ +# --arch=x86_64 --qemu_args="-smp 8" + +CONFIG_KUNIT=y + +CONFIG_DEBUG_KERNEL=y + +# Need some level of concurrency to test a concurrency sanitizer. +CONFIG_SMP=y + +CONFIG_KCSAN=y +CONFIG_KCSAN_KUNIT_TEST=y + +# Set these if you want to run test_barrier_nothreads +#CONFIG_KCSAN_STRICT=y +#CONFIG_KCSAN_WEAK_MEMORY=y + +# This prevents the test from timing out on many setups. Feel free to remove +# (or alter) this, in conjunction with setting a different test timeout with, +# for example, the --timeout kunit_tool option. +CONFIG_KCSAN_REPORT_ONCE_IN_MS=100 -- 2.37.0.170.g444d1eabd0-goog

2 years, 11 months

2
1
0 0

Re: FAIL: alsa/Makefile dependency check

by Mark Brown

On Fri, Jul 15, 2022 at 10:47:16PM +0800, li_jessen2016(a)gmail.com li wrote: > FAIL: alsa/Makefile dependency check: $(shell > FAIL: alsa/Makefile dependency check: pkg-config .. > So I wonder why the FAIL info appears in the presence of *$(shell > pkg-config --libs alsa) *in alsa/Makefile. Is it some sort of bug or > did I miss something? I think that's a bug in this tool you're running - it's not understanding the $(shell ...) and generating false positives, not 100% sure what it's trying to do but it's fairly clearly parsing every element in the statement as a dependency of some kind.

2 years, 11 months

1
0
0 0

Wycena paneli fotowoltaicznych

by Norbert Karecki

Dzień dobry, dostrzegam możliwość współpracy z Państwa firmą. Świadczymy kompleksową obsługę inwestycji w fotowoltaikę, która obniża koszty energii elektrycznej nawet o 90%. Czy są Państwo zainteresowani weryfikacją wstępnych propozycji? Pozdrawiam, Norbert Karecki

2 years, 11 months

1
0
0 0

[PATCH v2] firmware_loader: Replace kmap() with kmap_local_page()

by Fabio M. De Francesco

The use of kmap() is being deprecated in favor of kmap_local_page(). Two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) kmap() also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. kmap_local_page() is preferred over kmap() and kmap_atomic(). Where it cannot mechanically replace the latters, code refactor should be considered (special care must be taken if kernel virtual addresses are aliases in different contexts). With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). Call kmap_local_page() in firmware_loader wherever kmap() is currently used. In firmware_rw() use the helpers copy_{from,to}_page() instead of open coding the local mappings + memcpy(). Successfully tested with "firmware" selftests on a QEMU/KVM 32-bits VM with 4GB RAM, booting a kernel with HIGHMEM64GB enabled. Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Luis Chamberlain <mcgrof(a)kernel.org> Suggested-by: Ira Weiny <ira.weiny(a)intel.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco(a)gmail.com> --- v1->v2: According to the comments from Greg Kroah-Hartman (thanks!), extend the commit message adding information about why kmap() should be avoided. Delete an unused variable left in the code of v1, which has been Reported-by: kernel test robot <lkp(a)intel.com> drivers/base/firmware_loader/main.c | 4 ++-- drivers/base/firmware_loader/sysfs.c | 10 ++++------ 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c index ac3f34e80194..7c3590fd97c2 100644 --- a/drivers/base/firmware_loader/main.c +++ b/drivers/base/firmware_loader/main.c @@ -435,11 +435,11 @@ static int fw_decompress_xz_pages(struct device *dev, struct fw_priv *fw_priv, /* decompress onto the new allocated page */ page = fw_priv->pages[fw_priv->nr_pages - 1]; - xz_buf.out = kmap(page); + xz_buf.out = kmap_local_page(page); xz_buf.out_pos = 0; xz_buf.out_size = PAGE_SIZE; xz_ret = xz_dec_run(xz_dec, &xz_buf); - kunmap(page); + kunmap_local(xz_buf.out); fw_priv->size += xz_buf.out_pos; /* partial decompression means either end or error */ if (xz_buf.out_pos != PAGE_SIZE) diff --git a/drivers/base/firmware_loader/sysfs.c b/drivers/base/firmware_loader/sysfs.c index 5b0b85b70b6f..77bad32c481a 100644 --- a/drivers/base/firmware_loader/sysfs.c +++ b/drivers/base/firmware_loader/sysfs.c @@ -242,19 +242,17 @@ static void firmware_rw(struct fw_priv *fw_priv, char *buffer, loff_t offset, size_t count, bool read) { while (count) { - void *page_data; int page_nr = offset >> PAGE_SHIFT; int page_ofs = offset & (PAGE_SIZE - 1); int page_cnt = min_t(size_t, PAGE_SIZE - page_ofs, count); - page_data = kmap(fw_priv->pages[page_nr]); - if (read) - memcpy(buffer, page_data + page_ofs, page_cnt); + memcpy_from_page(buffer, fw_priv->pages[page_nr], + page_ofs, page_cnt); else - memcpy(page_data + page_ofs, buffer, page_cnt); + memcpy_to_page(fw_priv->pages[page_nr], page_ofs, + buffer, page_cnt); - kunmap(fw_priv->pages[page_nr]); buffer += page_cnt; offset += page_cnt; count -= page_cnt; -- 2.37.0

2 years, 11 months

2
1
0 0

[PATCH 1/2] kunit: tool: Add x86_64-smp architecture for SMP testing

by David Gow

Add a new QEMU config for kunit_tool, x86_64-smp, which provides an 8-cpu SMP setup. No other kunit_tool configurations provide an SMP setup, so this is the best bet for testing things like KCSAN, which require a multicore/multi-cpu system. The choice of 8 CPUs is pretty arbitrary: it's enough to get tests like KCSAN to run with a nontrivial number of worker threads, while still working relatively quickly on older machines. Signed-off-by: David Gow <davidgow(a)google.com> --- This is based off the discussion in: https://groups.google.com/g/kasan-dev/c/A7XzC2pXRC8 --- tools/testing/kunit/qemu_configs/x86_64-smp.py | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 tools/testing/kunit/qemu_configs/x86_64-smp.py diff --git a/tools/testing/kunit/qemu_configs/x86_64-smp.py b/tools/testing/kunit/qemu_configs/x86_64-smp.py new file mode 100644 index 000000000000..a95623f5f8b7 --- /dev/null +++ b/tools/testing/kunit/qemu_configs/x86_64-smp.py @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +from ..qemu_config import QemuArchParams + +QEMU_ARCH = QemuArchParams(linux_arch='x86_64', + kconfig=''' +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SMP=y + ''', + qemu_arch='x86_64', + kernel_path='arch/x86/boot/bzImage', + kernel_command_line='console=ttyS0', + extra_qemu_params=['-smp', '8']) -- 2.36.0.550.gb090851708-goog

2 years, 11 months

4
20
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-23-ga917dd94b832)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-23-ga917dd94b832) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-23-ga917d… Tree: kselftest Branch: next Git Describe: v5.19-rc4-23-ga917dd94b832 Git Commit: a917dd94b832c8f4ad458d0ca2bd1007466c5643 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 11 months

1
0
0 0

[PATCH v2] selftests: timers: clocksource-switch: add 'runtime' command line parameter

by Wolfram Sang

So the user can decide how long the test should run. Signed-off-by: Wolfram Sang <wsa+renesas(a)sang-engineering.com> Acked-by: John Stultz <jstultz(a)google.com> --- Change since V1: * added the new parameter to the help printout tools/testing/selftests/timers/clocksource-switch.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/timers/clocksource-switch.c b/tools/testing/selftests/timers/clocksource-switch.c index 5256e6215980..577e4b74211a 100644 --- a/tools/testing/selftests/timers/clocksource-switch.c +++ b/tools/testing/selftests/timers/clocksource-switch.c @@ -124,17 +124,22 @@ int main(int argc, char **argv) char orig_clk[512]; int count, i, status, opt; int do_sanity_check = 1; + int runtime = 60; pid_t pid; /* Process arguments */ - while ((opt = getopt(argc, argv, "s")) != -1) { + while ((opt = getopt(argc, argv, "st:")) != -1) { switch (opt) { case 's': do_sanity_check = 0; break; + case 't': + runtime = atoi(optarg); + break; default: - printf("Usage: %s [-s]\n", argv[0]); + printf("Usage: %s [-s] [-t <secs>]\n", argv[0]); printf(" -s: skip sanity checks\n"); + printf(" -t: Number of seconds to run\n"); exit(-1); } } @@ -167,7 +172,7 @@ int main(int argc, char **argv) printf("Running Asynchronous Switching Tests...\n"); pid = fork(); if (!pid) - return run_tests(60); + return run_tests(runtime); while (pid != waitpid(pid, &status, WNOHANG)) for (i = 0; i < count; i++) -- 2.35.1

2 years, 11 months

2
1
0 0

[PATCH 0/9] selftests: timers: fixes and improvements

by Wolfram Sang

The timer selftests are quite useful for me when enabling timers on new SoCs, e.g. like now with the CMT timer on a Renesas R-Car S4-8. During development, I needed these fixes and additions to make full use of the tests. I think they make all sense upstream, so here they are. Patches are based on v5.19-rc1. Looking forward to comments. Happy hacking, Wolfram Wolfram Sang (9): selftests: timers: valid-adjtimex: build fix for newer toolchains selftests: timers: fix declarations of main() selftests: timers: nanosleep: adapt to kselftest framework selftests: timers: inconsistency-check: adapt to kselftest framework selftests: timers: clocksource-switch: fix passing errors from child selftests: timers: clocksource-switch: sort includes selftests: timers: clocksource-switch: add command line switch to skip sanity check selftests: timers: clocksource-switch: add 'runtime' command line parameter selftests: timers: clocksource-switch: adapt to kselftest framework tools/testing/selftests/timers/adjtick.c | 2 +- tools/testing/selftests/timers/change_skew.c | 2 +- .../selftests/timers/clocksource-switch.c | 70 ++++++++++++------- .../selftests/timers/inconsistency-check.c | 32 +++++---- tools/testing/selftests/timers/nanosleep.c | 18 +++-- tools/testing/selftests/timers/raw_skew.c | 2 +- .../selftests/timers/skew_consistency.c | 2 +- .../testing/selftests/timers/valid-adjtimex.c | 2 +- 8 files changed, 80 insertions(+), 50 deletions(-) -- 2.35.1

2 years, 11 months

4
17
0 0

[PATCH] selftests/landlock: drop deprecated headers dependency

by Guillaume Tucker

The khdr make target has been removed, so drop it from the landlock Makefile dependencies as well as related include paths that are standard for headers in the kernel tree. Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> Reported-by: Anders Roxell <anders.roxell(a)linaro.org> --- tools/testing/selftests/landlock/Makefile | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/landlock/Makefile b/tools/testing/selftests/landlock/Makefile index 1313e44e8fb9..a6959df28eb0 100644 --- a/tools/testing/selftests/landlock/Makefile +++ b/tools/testing/selftests/landlock/Makefile @@ -11,13 +11,8 @@ TEST_GEN_PROGS_EXTENDED := true OVERRIDE_TARGETS := 1 include ../lib.mk -khdr_dir = $(top_srcdir)/usr/include - -$(khdr_dir)/linux/landlock.h: khdr - @: - $(OUTPUT)/true: true.c $(LINK.c) $< $(LDLIBS) -o $@ -static -$(OUTPUT)/%_test: %_test.c $(khdr_dir)/linux/landlock.h ../kselftest_harness.h common.h - $(LINK.c) $< $(LDLIBS) -o $@ -lcap -I$(khdr_dir) +$(OUTPUT)/%_test: %_test.c ../kselftest_harness.h common.h + $(LINK.c) $< $(LDLIBS) -o $@ -lcap -- 2.30.2

2 years, 11 months

2
1
0 0

[PATCH] tools/testing/selftests/net/bpf/Makefile: fix fatal error: 'bpf/bpf_helpers.h' file not found

by Jie2x Zhou

In tools/testing/selftests run: make -C bpf make -C net fatal error: 'bpf/bpf_helpers.h' file not found Add bpf/bpf_helpers.h include path in net/bpf/Makefile. Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Jie2x Zhou <jie2x.zhou(a)intel.com> --- tools/testing/selftests/net/bpf/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile index 8ccaf8732eb2..07d56d446358 100644 --- a/tools/testing/selftests/net/bpf/Makefile +++ b/tools/testing/selftests/net/bpf/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 CLANG ?= clang +CCINCLUDE += -I../bpf/tools/include CCINCLUDE += -I../../bpf CCINCLUDE += -I../../../../lib CCINCLUDE += -I../../../../../usr/include/ -- 2.36.1

2 years, 11 months

2
1
0 0

[PATCH] selftests/kcmp: Make the test output consistent and clear

by Gautam Menghani

Make the output format of this test consistent. Currently the output is as follows: +TAP version 13 +1..1 +# selftests: kcmp: kcmp_test +# pid1: 45814 pid2: 45815 FD: 1 FILES: 1 VM: 2 FS: 1 SIGHAND: 2 + IO: 0 SYSVSEM: 0 INV: -1 +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# # Planned tests != run tests (0 != 3) +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +# # Planned tests != run tests (0 != 3) +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +# # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 +ok 1 selftests: kcmp: kcmp_test With this patch applied the output is as follows: +TAP version 13 +1..1 +# selftests: kcmp: kcmp_test +# TAP version 13 +# 1..3 +# pid1: 46330 pid2: 46331 FD: 1 FILES: 2 VM: 2 FS: 2 SIGHAND: 1 + IO: 0 SYSVSEM: 0 INV: -1 +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# PASS: 0 returned as expected +# # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 +ok 1 selftests: kcmp: kcmp_test Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/kcmp/kcmp_test.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kcmp/kcmp_test.c b/tools/testing/selftests/kcmp/kcmp_test.c index 6ea7b9f37a41..25110c7c0b3e 100644 --- a/tools/testing/selftests/kcmp/kcmp_test.c +++ b/tools/testing/selftests/kcmp/kcmp_test.c @@ -88,6 +88,9 @@ int main(int argc, char **argv) int pid2 = getpid(); int ret; + ksft_print_header(); + ksft_set_plan(3); + fd2 = open(kpath, O_RDWR, 0644); if (fd2 < 0) { perror("Can't open file"); @@ -152,7 +155,6 @@ int main(int argc, char **argv) ksft_inc_pass_cnt(); } - ksft_print_cnts(); if (ret) ksft_exit_fail(); @@ -162,5 +164,5 @@ int main(int argc, char **argv) waitpid(pid2, &status, P_ALL); - return ksft_exit_pass(); + return 0; } -- 2.36.1

2 years, 11 months

2
3
0 0

[PATCH] proc: fix test for "vsyscall=xonly" boot option

by Alexey Dobriyan

Booting with vsyscall=xonly results in the "--xp" vsyscall VMA: ffffffffff600000-ffffffffff601000 --xp ... [vsyscall]\n Test does read from fixed vsyscall address to determine if kernel supports vsyscall page but it doesn't work with vsyscall=xonly because, well, vsyscall page is execute only. Fix test by trying to execute from the first byte of the page (which contains gettimeofday() stub). This should work because vsyscall entry points themselves have stable addresses by design. Alexey, avoiding parsing .config, /proc/config.gz and /proc/cmdline at all costs. Signed-off-by: Alexey Dobriyan <adobriyan(a)gmail.com> --- I'm not sure who reported what, so please add tested-by and reported-by lines. tools/testing/selftests/proc/proc-pid-vm.c | 75 ++++++++++++++++++++++++++--- 1 file changed, 68 insertions(+), 7 deletions(-) --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -211,10 +211,19 @@ static int make_exe(const uint8_t *payload, size_t len) } #endif -static bool g_vsyscall = false; +/* + * 0: vsyscall VMA doesn't exist vsyscall=none + * 1: vsyscall VMA is r-xp vsyscall=emulate + * 2: vsyscall VMA is --xp vsyscall=xonly + */ +static int g_vsyscall; +static const char *str_vsyscall; -static const char str_vsyscall[] = +static const char str_vsyscall_0[] = ""; +static const char str_vsyscall_1[] = "ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]\n"; +static const char str_vsyscall_2[] = +"ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall]\n"; #ifdef __x86_64__ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) @@ -223,13 +232,47 @@ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) } /* - * vsyscall page can't be unmapped, probe it with memory load. + * vsyscall page can't be unmapped, probe it directly. */ static void vsyscall(void) { pid_t pid; int wstatus; + pid = fork(); + if (pid < 0) { + fprintf(stderr, "fork, errno %d\n", errno); + exit(1); + } + if (pid == 0) { + struct rlimit rlim = {0, 0}; + (void)setrlimit(RLIMIT_CORE, &rlim); + + /* Hide "segfault at ffffffffff600000" messages. */ + struct sigaction act; + memset(&act, 0, sizeof(struct sigaction)); + act.sa_flags = SA_SIGINFO; + act.sa_sigaction = sigaction_SIGSEGV; + (void)sigaction(SIGSEGV, &act, NULL); + + /* gettimeofday(NULL, NULL); */ + asm volatile ( + "call %P0" + : + : "i" (0xffffffffff600000), "D" (NULL), "S" (NULL) + : "rax" + ); + exit(0); + } + waitpid(pid, &wstatus, 0); + if (WIFEXITED(wstatus) && WEXITSTATUS(wstatus) == 0) { + /* vsyscall page exists and is executable. */ + } else { + /* vsyscall page doesn't exist. */ + g_vsyscall = 0; + return; + } + pid = fork(); if (pid < 0) { fprintf(stderr, "fork, errno %d\n", errno); @@ -251,8 +294,13 @@ static void vsyscall(void) } waitpid(pid, &wstatus, 0); if (WIFEXITED(wstatus) && WEXITSTATUS(wstatus) == 0) { - g_vsyscall = true; + /* vsyscall page is readable and executable. */ + g_vsyscall = 1; + return; } + + /* vsyscall page is executable but unreadable. */ + g_vsyscall = 2; } int main(void) @@ -261,6 +309,19 @@ int main(void) int exec_fd; vsyscall(); + switch (g_vsyscall) { + case 0: + str_vsyscall = str_vsyscall_0; + break; + case 1: + str_vsyscall = str_vsyscall_1; + break; + case 2: + str_vsyscall = str_vsyscall_2; + break; + default: + abort(); + } atexit(ate); @@ -314,7 +375,7 @@ int main(void) /* Test /proc/$PID/maps */ { - const size_t len = strlen(buf0) + (g_vsyscall ? strlen(str_vsyscall) : 0); + const size_t len = strlen(buf0) + strlen(str_vsyscall); char buf[256]; ssize_t rv; int fd; @@ -327,7 +388,7 @@ int main(void) rv = read(fd, buf, sizeof(buf)); assert(rv == len); assert(memcmp(buf, buf0, strlen(buf0)) == 0); - if (g_vsyscall) { + if (g_vsyscall > 0) { assert(memcmp(buf + strlen(buf0), str_vsyscall, strlen(str_vsyscall)) == 0); } } @@ -374,7 +435,7 @@ int main(void) assert(memmem(buf, rv, S[i], strlen(S[i]))); } - if (g_vsyscall) { + if (g_vsyscall > 0) { assert(memmem(buf, rv, str_vsyscall, strlen(str_vsyscall))); } }

2 years, 11 months

2
2
0 0

[PATCH net v3 1/2] ip: fix dflt addr selection for connected nexthop

by Nicolas Dichtel

When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable(a)vger.kernel.org Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette(a)6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> --- v2 -> v3: - no change v1 -> v2: - remove useless arp off / fixed mac settings in the description net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index a57ba23571c9..20177ecf5bdd 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1230,7 +1230,7 @@ static int fib_check_nh_nongw(struct net *net, struct fib_nh *nh, nh->fib_nh_dev = in_dev->dev; dev_hold_track(nh->fib_nh_dev, &nh->fib_nh_dev_tracker, GFP_ATOMIC); - nh->fib_nh_scope = RT_SCOPE_HOST; + nh->fib_nh_scope = RT_SCOPE_LINK; if (!netif_carrier_ok(nh->fib_nh_dev)) nh->fib_nh_flags |= RTNH_F_LINKDOWN; err = 0; -- 2.33.0

2 years, 11 months

2
2
0 0

Get back to me... URGENT

by Abdwabbo Maddah

-- Dear, I had sent you a mail but i don't think you received it that's why am writing you again.It is important you get back to me as soon as you can. Abd-Wabbo Maddah

2 years, 11 months

1
0
0 0

[PATCH bpf-next] selftests/bpf: Return true/false (not 1/0) from bool functions

by xiaolinkui

From: Linkui Xiao <xiaolinkui(a)kylinos.cn> Return boolean values ("true" or "false") instead of 1 or 0 from bool functions. This fixes the following warnings from coccicheck: tools/testing/selftests/bpf/progs/test_xdp_noinline.c:407:9-10: WARNING: return of 0/1 in function 'decap_v4' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:389:9-10: WARNING: return of 0/1 in function 'decap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:290:9-10: WARNING: return of 0/1 in function 'encap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:264:9-10: WARNING: return of 0/1 in function 'parse_tcp' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:242:9-10: WARNING: return of 0/1 in function 'parse_udp' with return type bool Generated by: scripts/coccinelle/misc/boolreturn.cocci Signed-off-by: Linkui Xiao <xiaolinkui(a)kylinos.cn> Suggested-by: Stanislav Fomichev <sdf(a)google.com> --- .../selftests/bpf/progs/test_xdp_noinline.c | 30 +++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c index 125d872d7981..ba48fcb98ab2 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c @@ -239,7 +239,7 @@ bool parse_udp(void *data, void *data_end, udp = data + off; if (udp + 1 > data_end) - return 0; + return false; if (!is_icmp) { pckt->flow.port16[0] = udp->source; pckt->flow.port16[1] = udp->dest; @@ -247,7 +247,7 @@ bool parse_udp(void *data, void *data_end, pckt->flow.port16[0] = udp->dest; pckt->flow.port16[1] = udp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -261,7 +261,7 @@ bool parse_tcp(void *data, void *data_end, tcp = data + off; if (tcp + 1 > data_end) - return 0; + return false; if (tcp->syn) pckt->flags |= (1 << 1); if (!is_icmp) { @@ -271,7 +271,7 @@ bool parse_tcp(void *data, void *data_end, pckt->flow.port16[0] = tcp->dest; pckt->flow.port16[1] = tcp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -287,7 +287,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, void *data; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct ipv6hdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -295,7 +295,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct ipv6hdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || ip6h + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 56710; @@ -314,7 +314,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, ip6h->saddr.in6_u.u6_addr32[2] = 3; ip6h->saddr.in6_u.u6_addr32[3] = ip_suffix; memcpy(ip6h->daddr.in6_u.u6_addr32, dst->dstv6, 16); - return 1; + return true; } static __attribute__ ((noinline)) @@ -335,7 +335,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, ip_suffix <<= 15; ip_suffix ^= pckt->flow.src; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct iphdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -343,7 +343,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct iphdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || iph + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 8; @@ -367,8 +367,8 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, csum += *next_iph_u16++; iph->check = ~((csum & 0xffff) + (csum >> 16)); if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; - return 1; + return false; + return true; } static __attribute__ ((noinline)) @@ -386,10 +386,10 @@ bool decap_v6(struct xdp_md *xdp, void **data, void **data_end, bool inner_v4) else new_eth->eth_proto = 56710; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct ipv6hdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) @@ -404,10 +404,10 @@ bool decap_v4(struct xdp_md *xdp, void **data, void **data_end) memcpy(new_eth->eth_dest, old_eth->eth_dest, 6); new_eth->eth_proto = 8; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) -- 2.17.1

2 years, 11 months

4
3
0 0

[PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 1a087eec257154e26a81a7a0a15380d7a2431765 ] These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/wireguard/qemu/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile index e8a82e495d2e..fcc3f668b807 100644 --- a/tools/testing/selftests/wireguard/qemu/Makefile +++ b/tools/testing/selftests/wireguard/qemu/Makefile @@ -19,8 +19,6 @@ endif MIRROR := https://download.wireguard.com/qemu-test/distfiles/ KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug) -rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d)) -WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*) default: qemu @@ -325,8 +323,9 @@ $(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$( cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config $(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,) -$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES) +$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init $(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) +.PHONY: $(KERNEL_BZIMAGE) $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux -- 2.35.1

2 years, 11 months

1
0
0 0

[PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init

by Sasha Levin

From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> [ Upstream commit 829be057dbc1e71383b8d7de8edb31dcf07b4aa0 ] Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../testing/selftests/wireguard/qemu/arch/arm.config | 1 + .../selftests/wireguard/qemu/arch/armeb.config | 1 + .../testing/selftests/wireguard/qemu/arch/i686.config | 1 + .../testing/selftests/wireguard/qemu/arch/m68k.config | 1 + .../testing/selftests/wireguard/qemu/arch/mips.config | 1 + .../selftests/wireguard/qemu/arch/mipsel.config | 1 + .../selftests/wireguard/qemu/arch/powerpc.config | 1 + tools/testing/selftests/wireguard/qemu/init.c | 11 +++++++++++ 8 files changed, 18 insertions(+) diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config index fc7959bef9c2..0579c66be83e 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/arm.config +++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config @@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config index f3066be81c19..2a3307bbe534 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config +++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config @@ -7,6 +7,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1" CONFIG_CPU_BIG_ENDIAN=y diff --git a/tools/testing/selftests/wireguard/qemu/arch/i686.config b/tools/testing/selftests/wireguard/qemu/arch/i686.config index 6d90892a85a2..cd864b9be6fb 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/i686.config +++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config @@ -1,6 +1,7 @@ CONFIG_ACPI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config index 82c925e49beb..9639bfe06074 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config +++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config @@ -5,5 +5,6 @@ CONFIG_MAC=y CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips.config b/tools/testing/selftests/wireguard/qemu/arch/mips.config index d7ec63c17b30..2a84402353ab 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/mips.config +++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config @@ -6,6 +6,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config index 18a498293737..56146a101e7e 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config +++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config @@ -7,6 +7,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" CONFIG_FRAME_WARN=1024 diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config index 5e04882e8e35..174a9ffe2a36 100644 --- a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config +++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config @@ -4,6 +4,7 @@ CONFIG_PPC_85xx=y CONFIG_PHYS_64BIT=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_COMPAT_32BIT_TIME=y CONFIG_MATH_EMULATION=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1" diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c index 2a0f48fac925..542c34b00eb0 100644 --- a/tools/testing/selftests/wireguard/qemu/init.c +++ b/tools/testing/selftests/wireguard/qemu/init.c @@ -11,6 +11,7 @@ #include <stdlib.h> #include <stdbool.h> #include <fcntl.h> +#include <time.h> #include <sys/wait.h> #include <sys/mount.h> #include <sys/stat.h> @@ -67,6 +68,15 @@ static void seed_rng(void) close(fd); } +static void set_time(void) +{ + if (time(NULL)) + return; + pretty_message("[+] Setting fake time..."); + if (stime(&(time_t){1433512680}) < 0) + panic("settimeofday()"); +} + static void mount_filesystems(void) { pretty_message("[+] Mounting filesystems..."); @@ -256,6 +266,7 @@ int main(int argc, char *argv[]) print_banner(); mount_filesystems(); seed_rng(); + set_time(); kmod_selftests(); enable_logging(); clear_leaks(); -- 2.35.1

2 years, 11 months

1
0
0 0

[PATCH] selftests/bpf: Return true/false (not 1/0) from bool functions

by xiaolinkui

From: Linkui Xiao<xiaolinkui(a)kylinos.cn> Return boolean values ("true" or "false") instead of 1 or 0 from bool functions. This fixes the following warnings from coccicheck: tools/testing/selftests/bpf/progs/test_xdp_noinline.c:407:9-10: WARNING: return of 0/1 in function 'decap_v4' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:389:9-10: WARNING: return of 0/1 in function 'decap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:290:9-10: WARNING: return of 0/1 in function 'encap_v6' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:264:9-10: WARNING: return of 0/1 in function 'parse_tcp' with return type bool tools/testing/selftests/bpf/progs/test_xdp_noinline.c:242:9-10: WARNING: return of 0/1 in function 'parse_udp' with return type bool Generated by: scripts/coccinelle/misc/boolreturn.cocci Signed-off-by: Linkui Xiao<xiaolinkui(a)kylinos.cn> --- .../selftests/bpf/progs/test_xdp_noinline.c | 30 +++++++++---------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c index 125d872d7981..ba48fcb98ab2 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_noinline.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_noinline.c @@ -239,7 +239,7 @@ bool parse_udp(void *data, void *data_end, udp = data + off; if (udp + 1 > data_end) - return 0; + return false; if (!is_icmp) { pckt->flow.port16[0] = udp->source; pckt->flow.port16[1] = udp->dest; @@ -247,7 +247,7 @@ bool parse_udp(void *data, void *data_end, pckt->flow.port16[0] = udp->dest; pckt->flow.port16[1] = udp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -261,7 +261,7 @@ bool parse_tcp(void *data, void *data_end, tcp = data + off; if (tcp + 1 > data_end) - return 0; + return false; if (tcp->syn) pckt->flags |= (1 << 1); if (!is_icmp) { @@ -271,7 +271,7 @@ bool parse_tcp(void *data, void *data_end, pckt->flow.port16[0] = tcp->dest; pckt->flow.port16[1] = tcp->source; } - return 1; + return true; } static __attribute__ ((noinline)) @@ -287,7 +287,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, void *data; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct ipv6hdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -295,7 +295,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct ipv6hdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || ip6h + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 56710; @@ -314,7 +314,7 @@ bool encap_v6(struct xdp_md *xdp, struct ctl_value *cval, ip6h->saddr.in6_u.u6_addr32[2] = 3; ip6h->saddr.in6_u.u6_addr32[3] = ip_suffix; memcpy(ip6h->daddr.in6_u.u6_addr32, dst->dstv6, 16); - return 1; + return true; } static __attribute__ ((noinline)) @@ -335,7 +335,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, ip_suffix <<= 15; ip_suffix ^= pckt->flow.src; if (bpf_xdp_adjust_head(xdp, 0 - (int)sizeof(struct iphdr))) - return 0; + return false; data = (void *)(long)xdp->data; data_end = (void *)(long)xdp->data_end; new_eth = data; @@ -343,7 +343,7 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, old_eth = data + sizeof(struct iphdr); if (new_eth + 1 > data_end || old_eth + 1 > data_end || iph + 1 > data_end) - return 0; + return false; memcpy(new_eth->eth_dest, cval->mac, 6); memcpy(new_eth->eth_source, old_eth->eth_dest, 6); new_eth->eth_proto = 8; @@ -367,8 +367,8 @@ bool encap_v4(struct xdp_md *xdp, struct ctl_value *cval, csum += *next_iph_u16++; iph->check = ~((csum & 0xffff) + (csum >> 16)); if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; - return 1; + return false; + return true; } static __attribute__ ((noinline)) @@ -386,10 +386,10 @@ bool decap_v6(struct xdp_md *xdp, void **data, void **data_end, bool inner_v4) else new_eth->eth_proto = 56710; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct ipv6hdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) @@ -404,10 +404,10 @@ bool decap_v4(struct xdp_md *xdp, void **data, void **data_end) memcpy(new_eth->eth_dest, old_eth->eth_dest, 6); new_eth->eth_proto = 8; if (bpf_xdp_adjust_head(xdp, (int)sizeof(struct iphdr))) - return 0; + return false; *data = (void *)(long)xdp->data; *data_end = (void *)(long)xdp->data_end; - return 1; + return true; } static __attribute__ ((noinline)) -- 2.17.1

2 years, 11 months

3
2
0 0

[PATCH net v2 1/2] ip: fix dflt addr selection for connected nexthop

by Nicolas Dichtel

When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable(a)vger.kernel.org Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette(a)6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> --- v1 -> v2: - remove useless arp off / fixed mac settings in the description net/ipv4/fib_semantics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index a57ba23571c9..20177ecf5bdd 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -1230,7 +1230,7 @@ static int fib_check_nh_nongw(struct net *net, struct fib_nh *nh, nh->fib_nh_dev = in_dev->dev; dev_hold_track(nh->fib_nh_dev, &nh->fib_nh_dev_tracker, GFP_ATOMIC); - nh->fib_nh_scope = RT_SCOPE_HOST; + nh->fib_nh_scope = RT_SCOPE_LINK; if (!netif_carrier_ok(nh->fib_nh_dev)) nh->fib_nh_flags |= RTNH_F_LINKDOWN; err = 0; -- 2.33.0

2 years, 11 months

3
6
0 0

[PATCH v2 0/4] Fix kselftest build with sub-directory

by Guillaume Tucker

Earlier attempts to get "make O=build kselftest-all" to work were not successful as they made undesirable changes to some functions in the top-level Makefile. This series takes a different approach by removing the root cause of the problem within kselftest, which is when the sub-Makefile tries to install kernel headers "backwards" by calling make with the top-level Makefile. The actual issue comes from the fact that $(srctree) is ".." when building in a sub-directory with "O=build" which then obviously makes "-C $(top_srcdir)" point outside of the real source tree. With this series, the generic kselftest targets work as expected from the top level with or without a build directory e.g.: $ make kselftest-all $ make O=build kselftest-all Then in order to build using the sub-Makefile explicitly, the headers have to be installed first. This is arguably a valid requirement to have when building a tool from a sub-Makefile. For example, "make -C tools/testing/nvdimm/" fails in a similar way until <asm/rwonce.h> has been generated by a kernel build. v2: replace headers_install with headers Guillaume Tucker (4): selftests: drop khdr make target selftests: stop using KSFT_KHDR_INSTALL selftests: drop KSFT_KHDR_INSTALL make target Makefile: add headers to kselftest targets Makefile | 4 +- tools/testing/selftests/Makefile | 28 +------------- tools/testing/selftests/arm64/mte/Makefile | 1 - tools/testing/selftests/arm64/signal/Makefile | 1 - .../selftests/arm64/signal/test_signals.h | 4 +- .../selftests/drivers/s390x/uvdevice/Makefile | 1 - .../selftests/futex/functional/Makefile | 1 - tools/testing/selftests/kvm/Makefile | 1 - tools/testing/selftests/landlock/Makefile | 1 - tools/testing/selftests/lib.mk | 38 ------------------- tools/testing/selftests/net/Makefile | 1 - tools/testing/selftests/net/mptcp/Makefile | 1 - tools/testing/selftests/tc-testing/Makefile | 1 - tools/testing/selftests/vm/Makefile | 1 - 14 files changed, 5 insertions(+), 79 deletions(-) -- 2.30.2

2 years, 11 months

4
9
0 0

[PATCH 0/4] Fix kselftest build with sub-directory

by Guillaume Tucker

Earlier attempts to get "make O=build kselftest-all" to work were not successful as they made undesirable changes to some functions in the top-level Makefile. This series takes a different approach by removing the root cause of the problem within kselftest, which is when the sub-Makefile tries to install kernel headers "backwards" by calling make with the top-level Makefile. The actual issue comes from the fact that $(srctree) is ".." when building in a sub-directory with "O=build" which then obviously makes "-C $(top_srcdir)" point outside of the real source tree. With this series, the generic kselftest targets work as expected from the top level with or without a build directory e.g.: $ make kselftest-all $ make O=build kselftest-all Then in order to build using the sub-Makefile explicitly, the headers have to be installed first. This is arguably a valid requirement to have when building a tool from a sub-Makefile. For example, "make -C tools/testing/nvdimm/" fails in a similar way until <asm/rwonce.h> has been generated by a kernel build. Guillaume Tucker (4): selftests: drop khdr make target selftests: stop using KSFT_KHDR_INSTALL selftests: drop KSFT_KHDR_INSTALL make target Makefile: add headers_install to kselftest targets Makefile | 4 +- tools/testing/selftests/Makefile | 28 +------------- tools/testing/selftests/arm64/mte/Makefile | 1 - tools/testing/selftests/arm64/signal/Makefile | 1 - .../selftests/arm64/signal/test_signals.h | 4 +- .../selftests/drivers/s390x/uvdevice/Makefile | 1 - .../selftests/futex/functional/Makefile | 1 - tools/testing/selftests/kvm/Makefile | 1 - tools/testing/selftests/landlock/Makefile | 1 - tools/testing/selftests/lib.mk | 38 ------------------- tools/testing/selftests/net/Makefile | 1 - tools/testing/selftests/net/mptcp/Makefile | 1 - tools/testing/selftests/tc-testing/Makefile | 1 - tools/testing/selftests/vm/Makefile | 1 - 14 files changed, 5 insertions(+), 79 deletions(-) -- 2.30.2

2 years, 11 months

5
11
0 0

[PATCH v7 0/7] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. Other than the data and the signature, the helper also receives two parameters for the keyring, which can be provided as alternatives: one is a key pointer returned by the new bpf_lookup_user_key() helper, called with a key serial possibly decided by the user; another is a pre-determined ID among values defined in include/linux/verification.h. While the first keyring-related parameter provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, the serial used to obtain the key pointer might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. The second keyring-related parameter instead provides much stronger guarantees, especially if the pre-determined ID is not passed by user space but is hardcoded in the eBPF program, and that program is signed. In this case, bpf_verify_pkcs7_signature() will always perform signature verification with a key that the system administrator approves, i.e. the primary, secondary or platform keyring. bpf_lookup_user_key() comes with the corresponding release helper bpf_key_put(), to decrement the reference count of the key found with the former helper. The eBPF verifier has been enhanced to ensure that the release helper is always called whenever the acquire helper is called, or otherwise refuses to load the program. bpf_lookup_user_key() also accepts lookup-specific flags KEY_LOOKUP_CREATE and KEY_LOOKUP_PARTIAL. Although these are most likely not useful for the bpf_verify_pkcs7_signature(), newly defined flags could be. bpf_lookup_user_key() does not request a particular permission to lookup_user_key(), as it cannot determine it by itself. Also, it should not get it from the user, as the user could pass an arbitrary value and use the key for a different purpose. Instead, bpf_lookup_user_key() requests KEY_DEFER_PERM_CHECK, and defers the permission check to the helper that actually uses the key, in this patch set to bpf_verify_pkcs7_signature(). Since key_task_permission() is called by the PKCS#7 code during signature verification, the only additional function bpf_verify_pkcs7_signature() has to call is key_validate(). With that, the permission check can be considered complete and equivalent, as it was done by bpf_lookup_user_key() with the appropriate permission (in this case KEY_NEED_SEARCH). All helpers can be called only from sleepable programs, because of memory allocation (with lookup flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. The correctness of implementation of the new helpers and of their usage is checked with the introduced tests. The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 makes available for new eBPF helpers some key-related definitions. Patch 3 introduces the bpf_lookup_user_key() and bpf_key_put() helpers. Patch 4 introduces the bpf_verify_pkcs7_signature(). Finally, patches 5-7 introduce the tests. Changelog v6: - Switch back to key lookup helpers + signature verification (until v5), and defer permission check from bpf_lookup_user_key() to bpf_verify_pkcs7_signature() - Add additional key lookup test to illustrate the usage of the KEY_LOOKUP_CREATE flag and validate the flags (suggested by Daniel) - Make description of flags of bpf_lookup_user_key() more user-friendly (suggested by Daniel) - Fix validation of flags parameter in bpf_lookup_user_key() (reported by Daniel) - Rename bpf_verify_pkcs7_signature() keyring-related parameters to user_keyring and system_keyring to make their purpose more clear - Accept keyring-related parameters of bpf_verify_pkcs7_signature() as alternatives (suggested by KP) - Replace unsigned long type with u64 in helper declaration (suggested by Daniel) - Extend the bpf_verify_pkcs7_signature() test by calling the helper without data, by ensuring that the helper enforces the keyring-related parameters as alternatives, by ensuring that the helper rejects inaccessible and expired keyrings, and by checking all system keyrings - Move bpf_lookup_user_key() and bpf_key_put() usage tests to ref_tracking.c (suggested by John) - Call bpf_lookup_user_key() and bpf_key_put() only in sleepable programs v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (7): bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h bpf: Add bpf_lookup_user_key() and bpf_key_put() helpers bpf: Add bpf_verify_pkcs7_signature() helper selftests: Add verifier tests for bpf_lookup_user_key() and bpf_key_put() selftests/bpf: Add additional test for bpf_lookup_user_key() selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/linux/key.h | 3 + include/uapi/linux/bpf.h | 47 ++ kernel/bpf/bpf_lsm.c | 116 +++++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 6 +- scripts/bpf_doc.py | 2 + security/keys/internal.h | 2 - tools/include/uapi/linux/bpf.h | 47 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../bpf/prog_tests/lookup_user_key.c | 94 ++++ .../bpf/prog_tests/verify_pkcs7_sig.c | 410 ++++++++++++++++++ .../bpf/progs/test_lookup_user_key.c | 35 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 90 ++++ tools/testing/selftests/bpf/test_verifier.c | 3 +- .../selftests/bpf/verifier/ref_tracking.c | 66 +++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 18 files changed, 1035 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_user_key.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_user_key.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

2 years, 11 months

2
8
0 0

[PATCH v2] kunit: executor: Fix a memory leak on failure in kunit_filter_tests

by David Gow

It's possible that memory allocation for 'filtered' will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ And by smatch via Dan Carpenter and the kernel test robot: https://lore.kernel.org/all/202207101328.ASjx88yj-lkp@intel.com/ Fixes: a02353f49162 ("kunit: bail out of test filtering logic quicker if OOM") Reported-by: kernel test robot <yujie.liu(a)intel.com> Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- Thanks everyone! No actual code changes in v2, just fixes to the description. Changes since v1: https://lore.kernel.org/all/20220712095627.1770312-1-davidgow@google.com/ - Fix a mistake in the commit description where we noted the allocation for 'copy' could fail, instead of 'filtered'. (Thanks Yujie!) - Noted in the description that smatch also found this (Thanks Dan!) - Added the extra Reported-by and Reviewed-by tags. --- lib/kunit/executor.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 6c489d6c5e5d..5e223327196a 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -74,8 +74,10 @@ kunit_filter_tests(const struct kunit_suite *const suite, const char *test_glob) return ERR_PTR(-ENOMEM); filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL); - if (!filtered) + if (!filtered) { + kfree(copy); return ERR_PTR(-ENOMEM); + } n = 0; kunit_suite_for_each_test_case(suite, test_case) { -- 2.37.0.144.g8ac04bfd2-goog

2 years, 11 months

1
0
0 0

[PATCH] kunit: executor: Fix a memory leak on failure in kunit_filter_tests

by David Gow

It's possible that memory allocation for the copy will fail, but for the copy of the suite to succeed. In this case, the copy could be leaked. Properly free 'copy' in the error case for the allocation of 'filtered' failing. Note that there may also have been a similar issue in kunit_filter_subsuites, before it was removed in "kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites". This was reported by clang-analyzer via the kernel test robot, here: https://lore.kernel.org/all/c8073b8e-7b9e-0830-4177-87c12f16349c@intel.com/ Fixes: a02353f49162 ("kunit: bail out of test filtering logic quicker if OOM") Reported-by: kernel test robot <yujie.liu(a)intel.com> Signed-off-by: David Gow <davidgow(a)google.com> --- lib/kunit/executor.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 6c489d6c5e5d..5e223327196a 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -74,8 +74,10 @@ kunit_filter_tests(const struct kunit_suite *const suite, const char *test_glob) return ERR_PTR(-ENOMEM); filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL); - if (!filtered) + if (!filtered) { + kfree(copy); return ERR_PTR(-ENOMEM); + } n = 0; kunit_suite_for_each_test_case(suite, test_case) { -- 2.37.0.144.g8ac04bfd2-goog

2 years, 11 months

4
3
0 0

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-13-g67bd292cd281)

by kernelci.org bot

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-13-g67bd292cd281) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-13-g67bd2… Tree: kselftest Branch: next Git Describe: v5.19-rc4-13-g67bd292cd281 Git Commit: 67bd292cd281be2216cd269c161be31cd3ccf196 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 2 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 11 months

1
0
0 0

[PATCH net] selftest: net: add tun to .gitignore

by Jakub Kicinski

Add missing .gitignore entry. Fixes: 839b92fede7b ("selftest: tun: add test for NAPI dismantle") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- tools/testing/selftests/net/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index a29f79618934..ffc35a22e914 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -36,4 +36,5 @@ test_unix_oob gro ioam6_parser toeplitz +tun cmsg_sender -- 2.36.1

2 years, 11 months

2
1
0 0

[PATCH] selftests/ftrace: func_event_triggers: fix typo in user message

by Randy Dunlap

Correct typo of "it's" to "it". Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20211224.orig/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc +++ linux-next-20211224/tools/testing/selftests/ftrace/test.d/ftrace/func_event_triggers.tc @@ -85,7 +85,7 @@ run_enable_disable() { echo $check_disable > $EVENT_ENABLE done sleep $SLEEP_TIME - echo " make sure it's still works" + echo " make sure it still works" test_event_enabled $check_enable_star reset_ftrace_filter

2 years, 11 months

2
2
0 0

[PATCH v6 1/4] panic: Taint kernel if tests are run

by David Gow

Most in-kernel tests (such as KUnit tests) are not supposed to run on production systems: they may do deliberately illegal things to trigger errors, and have security implications (for example, KUnit assertions will often deliberately leak kernel addresses). Add a new taint type, TAINT_TEST to signal that a test has been run. This will be printed as 'N' (originally for kuNit, as every other sensible letter was taken.) This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc.) Acked-by: Luis Chamberlain <mcgrof(a)kernel.org> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- This is v6 of the "make tests taint the kernel" patchset. The only changes since v5 (which is the version in linux-next at time of writing) are some rather critical fixes to patch 2/4, where the cruicial check was inverted. (Oops!) The 'N' character for the taint is even less useful now that it's no longer short for kuNit, but all the letters in TEST are taken. :-( No changes since v5: https://lore.kernel.org/linux-kselftest/20220702040959.3232874-1-davidgow@g… No changes since v4: https://lore.kernel.org/linux-kselftest/20220701084744.3002019-1-davidgow@g… Changes since v3: https://lore.kernel.org/lkml/20220513083212.3537869-1-davidgow@google.com/ - Remove the mention of KUnit from the documentation. - Add Luis and Brendan's Acked/Reviewed-by tags. Changes since v2: https://lore.kernel.org/linux-kselftest/20220430030019.803481-1-davidgow@go… - Rename TAINT_KUNIT -> TAINT_TEST. - Split into separate patches for adding the taint, and triggering it. - Taint on a kselftest_module being loaded (patch 3/3) Changes since v1: https://lore.kernel.org/linux-kselftest/20220429043913.626647-1-davidgow@go… - Make the taint per-module, to handle the case when tests are in (longer lasting) modules. (Thanks Greg KH). Note that this still has checkpatch.pl warnings around bracket placement, which are intentional as part of matching the surrounding code. --- Documentation/admin-guide/tainted-kernels.rst | 1 + include/linux/panic.h | 3 ++- kernel/panic.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index ceeed7b0798d..7d80e8c307d1 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -100,6 +100,7 @@ Bit Log Number Reason that got the kernel tainted 15 _/K 32768 kernel has been live patched 16 _/X 65536 auxiliary taint, defined for and used by distros 17 _/T 131072 kernel was built with the struct randomization plugin + 18 _/N 262144 an in-kernel test has been run === === ====== ======================================================== Note: The character ``_`` is representing a blank in this table to make reading diff --git a/include/linux/panic.h b/include/linux/panic.h index e71161da69c4..c7759b3f2045 100644 --- a/include/linux/panic.h +++ b/include/linux/panic.h @@ -68,7 +68,8 @@ static inline void set_arch_panic_timeout(int timeout, int arch_default_timeout) #define TAINT_LIVEPATCH 15 #define TAINT_AUX 16 #define TAINT_RANDSTRUCT 17 -#define TAINT_FLAGS_COUNT 18 +#define TAINT_TEST 18 +#define TAINT_FLAGS_COUNT 19 #define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1) struct taint_flag { diff --git a/kernel/panic.c b/kernel/panic.c index a3c758dba15a..6b3369e21026 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -428,6 +428,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = { [ TAINT_LIVEPATCH ] = { 'K', ' ', true }, [ TAINT_AUX ] = { 'X', ' ', true }, [ TAINT_RANDSTRUCT ] = { 'T', ' ', true }, + [ TAINT_TEST ] = { 'N', ' ', true }, }; /** -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

3
9
0 0

Re: [PATCH] selftests/proc: Fix proc-pid-vm for vsyscall=xonly.

by Dylan Hatch

Accidentally hit direct reply, adding Shuah Khan <shuah(a)kernel.org>, linux-kernel(a)vger.kernel.org, linux-fsdevel(a)vger.kernel.org, linux-kselftest(a)vger.kernel.org, Shuah Khan <skhan(a)linuxfoundation.org> On Mon, Jul 11, 2022 at 4:04 PM Dylan Hatch <dylanbhatch(a)google.com> wrote: > > On Wed, Jun 22, 2022 at 10:15 AM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > > > On 6/21/22 6:18 PM, Dylan Hatch wrote: > > > On Fri, Jun 17, 2022 at 3:27 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >> > > >> On 6/17/22 4:05 PM, Dylan Hatch wrote: > > >>> On Fri, Jun 17, 2022 at 12:38 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >>>> > > >>>> On 6/17/22 12:45 PM, Dylan Hatch wrote: > > >>>>> On Thu, Jun 16, 2022 at 4:01 PM Shuah Khan <skhan(a)linuxfoundation.org> wrote: > > >>>>>> > > >>> > > >>>> > > >>>> It depends on the goal of the test. Is the test looking to see if the > > >>>> probe fails with insufficient permissions, then you are changing the > > >>>> test to not check for that condition. > > >>> > > >>> The goal of the test is to validate the output of /proc/$PID/maps, and > > >>> the memory probe is only needed as setup to determine what the > > >>> expected output should be. This used to be sufficient, but now it can > > >>> no longer fully disambiguate it with the introduction of > > >>> vsyscall=xonly. The solution proposed here is to disambiguate it by > > >>> also checking the length read from /proc/$PID/maps. > > >>> > > >>>> > > >> > > >> Makes sense. However the question is does this test need to be enhanced > > >> with the addition of vsyscall=xonly? > > >> > > >>>> I would say in this case, the right approach would be to leave the test > > >>>> as is and report expected fail and add other cases. > > >>>> > > >>>> The goal being adding more coverage and not necessarily opt for a simple > > >>>> solution. > > >>> > > >>> What does it mean to report a test as expected fail? Is this a > > >>> mechanism unique to kselftest? I agree adding another test case would > > >>> work, but I'm unsure how to do it within the framework of kselftest. > > >>> Ideally, there would be separate test cases for vsyscall=none, > > >>> vsyscall=emulate, and vsyscall=xonly, but these options can be toggled > > >>> both in the kernel config and on the kernel command line, meaning (to > > >>> the best of my knowledge) these test cases would have to be built > > >>> conditionally against the conflig options and also parse the command > > >>> line for the 'vsyscall' option. > > >>> > > >> > > >> Expected fail isn't unique kselftest. It is a testing criteria where > > >> a test is expected to fail. For example if a file can only be opened > > >> with privileged user a test that runs and looks for failure is an > > >> expected to fail case - we are looking for a failure. > > >> > > >> A complete battery of tests for vsyscall=none, vsyscall=emulate, > > >> vsyscall=xonly would test for conditions that are expected to pass > > >> and fail based on the config. > > >> > > >> tools/testing/selftests/proc/config doesn't have any config options > > >> that are relevant to VSYSCALL > > >> > > >> Can you please send me the how you are running the test and what the > > >> failure output looks like? > > > > > > I'm building a kernel with the following relevant configurations: > > > > > > $ cat .config | grep VSYSCALL > > > CONFIG_GENERIC_TIME_VSYSCALL=y > > > CONFIG_X86_VSYSCALL_EMULATION=y > > > CONFIG_LEGACY_VSYSCALL_XONLY=y > > > # CONFIG_LEGACY_VSYSCALL_NONE is not set > > > > > > Running the test without this change both in virtme and on real > > > hardware gives the following error: > > > > > > # ./tools/testing/selftests/proc/proc-pid-vm > > > proc-pid-vm: proc-pid-vm.c:328: int main(void): Assertion `rv == len' failed. > > > Aborted > > > > > > This is because when CONFIG_LEGACY_VSYSCALL_XONLY=y a probe of the > > > vsyscall page results in a segfault. This test was originally written > > > before this option existed so it incorrectly assumes the vsyscall page > > > isn't mapped at all, and the expected buffer length doesn't match the > > > result. > > > > > > An alternate method of fixing this test could involve setting the > > > expected result based on the config with #ifdef blocks, but I wasn't > > > sure if that could be done for kernel config options in kselftest > > > code. There's also the matter of checking the kernel command line for > > > a `vsyscall=` arg, is parsing /proc/cmdline the best way to do this? > > > > > > > We have a few tests do ifdef to be able to test the code as well as deal > > with config specific tests. Not an issue. > > > > Parsing /proc/cmdline line is flexible for sure, if you want to use that > > route. > > > > Thank you for finding the problem and identifying missing coverage. Look > > forward to any patches fixing the problem. > > > > thanks, > > -- Shuah > I've done some experimenting with ifdefs on config options, but it seems that these options do not propagate properly into the tests. Is there a specific method I should be using to propagate the config values, or would you be able to point me to an example where this is done properly? Thanks and sorry for the slow reply on this, Dylan

2 years, 11 months

1
0
0 0

[PATCH v3] kunit: tool: Enable virtio/PCI by default on UML

by Daniel Latypov

From: David Gow <davidgow(a)google.com> There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Tested-by: José Expósito <jose.exposito89(a)gmail.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- NOTE: This depends on v4 of the repeatable --kunitconfig patch here: https://patchwork.kernel.org/project/linux-kselftest/patch/20220708013632.1… Please apply it first first. Changes since v2: (dlatypov(a)google.com) - Rebase on top of the -kselftest kunit branch + v4 of the --kunitconfig patch. It rebased cleanly, but it evidently would not apply cleanly due to all the conflicts v4 --kunitconfig had with --qemu_args Changes since v1: https://lore.kernel.org/linux-kselftest/20220624084400.1454579-1-davidgow@g… - (Hopefully) fix a pytype warning re: architecture being None in the tests. (Thanks, Daniel) - Rebase on top of the new combined v3 of the kconfig/kunitconfig patchset. - Add José's Tested-by and Daniel's Reviewed-by. Changes since RFC: https://lore.kernel.org/linux-kselftest/20220622035326.759935-1-davidgow@go… - Rebase on top of the previous kconfig patches. - Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan) - Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed. --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 14 ++++++++++---- tools/testing/kunit/kunit_tool_test.py | 12 ++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 56492090e28e..f5c26ea89714 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) kconfig.merge_in_entries(base_kunitconfig) return kconfig @@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig + def make_allyesconfig(self, build_dir: str, make_options) -> None: stdout.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -298,7 +304,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -329,7 +335,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index ad63d0d34f3f..446ac432d9a4 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # Should generate the .config @@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() self.assertTrue(tree.build_reconfig(build_dir, make_options=[])) @@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # ... so we should trigger a call to build_config() base-commit: cbb6bc7059151df198b45e883ed731d8f528b65b -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

2
4
0 0

[PATCH 0/2] selftests: forwarding: Install two missing tests

by Martin Blumenstingl

For some distributions (e.g. OpenWrt) we don't want to rely on rsync to copy the tests to the target as some extra dependencies need to be installed. The Makefile in tools/testing/selftests/net/forwarding already installs most of the tests. This series adds the two missing tests to the list of installed tests. That way a downstream distribution can build a package using this Makefile (and add dependencies there as needed). Martin Blumenstingl (2): selftests: forwarding: Install local_termination.sh selftests: forwarding: Install no_forwarding.sh tools/testing/selftests/net/forwarding/Makefile | 2 ++ 1 file changed, 2 insertions(+) -- 2.37.0

2 years, 11 months

3
7
0 0

[PATCH v3 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection, and removes the need to NULL-terminate suite_sets. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. This is required, as otherwise the first two patches may break these tests entirely. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests on a number of architectures, and with modules on x86_64, and it seems good-to-go to me. More testing (particularly of modules) with more interesting setups never hurts, though! Cheers, -- David Changes since v2: https://lore.kernel.org/linux-kselftest/20220621085345.603820-1-davidgow@go… - Add various Reviewed-by and Acked-by tags. - Fix the Kconfig for thunderbolt to not allow USB4=y and KUNIT=m with tests enabled. - Clean up the sdhci-of-aspeed init a bit more (Thanks Daniel) Changes since v1: https://lore.kernel.org/linux-kselftest/20220618090310.1174932-1-davidgow@g… - Fix a compile issue when CONFIG_KUNIT=m (Thanks Christophe) - No longer NULL-terminate suite_sets. - Move the thunderbird Kconfig to the correct patch (Thanks Andra) - Add all the Tested-by and Acked-by tags. --- Daniel Latypov (1): Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 34 +---- drivers/thunderbolt/Kconfig | 6 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 115 ++++---------- lib/kunit/executor_test.c | 144 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 154 insertions(+), 343 deletions(-) -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

3
12
0 0

<> Rank pharma or adult sites with blackhat SEO <>

by Julianne

Special Blackhat plans for special website needs https://blackhatseoservices.tk/ Unsubscribe: https://mgdots.co/unsubscribe/

2 years, 11 months

1
0
0 0

kselftest/next kselftest-seccomp: 4 runs, 1 regressions (v5.19-rc4-9-gdbeb23272687)

by kernelci.org bot

kselftest/next kselftest-seccomp: 4 runs, 1 regressions (v5.19-rc4-9-gdbeb23272687) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-9-gdbe… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v5.19-rc4-9-gdbeb23272687 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: dbeb232726871352fc3e688ff5b02897f8cb0dc7 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c8be7aee6aa7d244a39bcf Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-10 (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-9-gdbeb23272687/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-9-gdbeb23272687/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62c8be7aee6aa7d244a39bd0 failing since 10 days (last pass: v5.19-rc1, first fail: v5.19-rc4-4-g43fe0cc46b62)

2 years, 11 months

1
0
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-9-gdbeb23272687)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-9-gdbeb23272687) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-9-gdbeb23… Tree: kselftest Branch: next Git Describe: v5.19-rc4-9-gdbeb23272687 Git Commit: dbeb232726871352fc3e688ff5b02897f8cb0dc7 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 11 months

1
0
0 0

[PATCH bpf] selftests/bpf: Fix xdp_synproxy build failure if CONFIG_NF_CONNTRACK=m/n

by Maxim Mikityanskiy

When CONFIG_NF_CONNTRACK=m, struct bpf_ct_opts and enum member BPF_F_CURRENT_NETNS are not exposed. This commit allows building the xdp_synproxy selftest in such cases. Note that nf_conntrack must be loaded before running the test if it's compiled as a module. This commit also allows this selftest to be successfully compiled when CONFIG_NF_CONNTRACK is disabled. One unused local variable of type struct bpf_ct_opts is also removed. Reported-by: Yauheni Kaliuta <ykaliuta(a)redhat.com> Signed-off-by: Maxim Mikityanskiy <maximmi(a)nvidia.com> Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers") --- .../selftests/bpf/progs/xdp_synproxy_kern.c | 24 +++++++++++++------ 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c index 9fd62e94b5e6..736686e903f6 100644 --- a/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c +++ b/tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c @@ -77,16 +77,30 @@ struct { __uint(max_entries, MAX_ALLOWED_PORTS); } allowed_ports SEC(".maps"); +/* Some symbols defined in net/netfilter/nf_conntrack_bpf.c are unavailable in + * vmlinux.h if CONFIG_NF_CONNTRACK=m, so they are redefined locally. + */ + +struct bpf_ct_opts___local { + s32 netns_id; + s32 error; + u8 l4proto; + u8 dir; + u8 reserved[2]; +} __attribute__((preserve_access_index)); + +#define BPF_F_CURRENT_NETNS (-1) + extern struct nf_conn *bpf_xdp_ct_lookup(struct xdp_md *xdp_ctx, struct bpf_sock_tuple *bpf_tuple, __u32 len_tuple, - struct bpf_ct_opts *opts, + struct bpf_ct_opts___local *opts, __u32 len_opts) __ksym; extern struct nf_conn *bpf_skb_ct_lookup(struct __sk_buff *skb_ctx, struct bpf_sock_tuple *bpf_tuple, u32 len_tuple, - struct bpf_ct_opts *opts, + struct bpf_ct_opts___local *opts, u32 len_opts) __ksym; extern void bpf_ct_release(struct nf_conn *ct) __ksym; @@ -393,7 +407,7 @@ static __always_inline int tcp_dissect(void *data, void *data_end, static __always_inline int tcp_lookup(void *ctx, struct header_pointers *hdr, bool xdp) { - struct bpf_ct_opts ct_lookup_opts = { + struct bpf_ct_opts___local ct_lookup_opts = { .netns_id = BPF_F_CURRENT_NETNS, .l4proto = IPPROTO_TCP, }; @@ -714,10 +728,6 @@ static __always_inline int syncookie_handle_ack(struct header_pointers *hdr) static __always_inline int syncookie_part1(void *ctx, void *data, void *data_end, struct header_pointers *hdr, bool xdp) { - struct bpf_ct_opts ct_lookup_opts = { - .netns_id = BPF_F_CURRENT_NETNS, - .l4proto = IPPROTO_TCP, - }; int ret; ret = tcp_dissect(data, data_end, hdr); -- 2.30.2

2 years, 11 months

4
3
0 0

[PATCH net-next 0/5] tls: rx: nopad and backlog flushing

by Jakub Kicinski

This small series contains the two changes I've been working towards in the previous ~50 patches a couple of months ago. The first major change is the optional "nopad" optimization. Currently TLS 1.3 Rx performs quite poorly because it does not support the "zero-copy" or rather direct decrypt to a user space buffer. Because of TLS 1.3 record padding we don't know if a record contains data or a control message until we decrypt it. Most records will contain data, tho, so the optimization is to try the decryption hoping its data and retry if it wasn't. The performance gain from doing that is significant (~40%) but if I'm completely honest the major reason is that we call skb_cow_data() on the non-"zc" path. The next series will remove the CoW, dropping the gain to only ~10%. The second change is to flush the backlog every 128kB. Jakub Kicinski (5): tls: rx: don't include tail size in data_len tls: rx: support optimistic decrypt to user buffer with TLS 1.3 tls: rx: add sockopt for enabling optimistic decrypt with TLS 1.3 selftests: tls: add selftest variant for pad tls: rx: periodically flush socket backlog Documentation/networking/tls.rst | 18 +++++++ include/linux/sockptr.h | 8 +++ include/net/tls.h | 3 ++ include/uapi/linux/snmp.h | 1 + include/uapi/linux/tls.h | 2 + net/core/sock.c | 1 + net/tls/tls_main.c | 75 +++++++++++++++++++++++++++ net/tls/tls_proc.c | 1 + net/tls/tls_sw.c | 84 ++++++++++++++++++++++++------- tools/testing/selftests/net/tls.c | 15 ++++++ 10 files changed, 191 insertions(+), 17 deletions(-) -- 2.36.1

2 years, 11 months

3
8
0 0

[PATCH 00/12] Fix several documentation build warnings with Sphinx 2.4.4

by Mauro Carvalho Chehab

This series is against next-20220701. It fixes several warnings that are currently produced while building html docs. Each patch in this series is independent from the others, as each one touches a different file. Mauro Carvalho Chehab (12): docs: ext4: blockmap.rst: fix a broken table docs: tegra194-hte.rst: don't include gpiolib.c twice docs: device-mapper: add a blank line at writecache.rst docs: PCI: pci-vntb-function.rst: Properly include ascii artwork docs: PCI: pci-vntb-howto.rst: fix a title markup docs: virt: kvm: fix a title markup at api.rst docs: ABI: sysfs-bus-nvdimm kunit: test.h: fix a kernel-doc markup net: mac80211: fix a kernel-doc markup docs: alsa: alsa-driver-api.rst: remove a kernel-doc file docs: arm: index.rst: add google/chromebook-boot-flow docs: leds: index.rst: add leds-qcom-lpg to it Documentation/ABI/testing/sysfs-bus-nvdimm | 2 ++ Documentation/PCI/endpoint/pci-vntb-function.rst | 2 +- Documentation/PCI/endpoint/pci-vntb-howto.rst | 2 +- Documentation/admin-guide/device-mapper/writecache.rst | 1 + Documentation/arm/index.rst | 2 ++ Documentation/driver-api/hte/tegra194-hte.rst | 3 +-- Documentation/filesystems/ext4/blockmap.rst | 2 +- Documentation/leds/index.rst | 1 + Documentation/sound/kernel-api/alsa-driver-api.rst | 1 - Documentation/virt/kvm/api.rst | 6 +++--- include/kunit/test.h | 2 +- include/net/mac80211.h | 2 +- 12 files changed, 15 insertions(+), 11 deletions(-) -- 2.36.1

2 years, 11 months

4
4
0 0

[PATCH v13 0/4] trace: Introduce objtrace trigger to trace the kernel object

by Jeff Xie

Introduce a method based on function tracer to trace any object and get the value of the object dynamically. the object can be obtained from the dynamic event (kprobe_event/uprobe_event) or the static event(tracepoint). Usage: When using the kprobe event, only need to set the objtrace(a new trigger), we can get the value of the object. The object is from the setting of the kprobe event. For example: For the function bio_add_page(): int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) Firstly, we can set the base of the object, thus the first string "arg1" stands for the value of the first parameter of this function bio_add_gage(), # echo 'p bio_add_page arg1=$arg1' > ./kprobe_events Secondly, we can get the value dynamically based on above object. find the offset of the bi_size in struct bio: $ gdb vmlinux (gdb) p &(((struct bio *)0)->bi_iter.bi_size) $1 = (unsigned int *) 0x28 # echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > ./events/kprobes/ \ p_bio_add_page_0/trigger # cd /sys/kernel/debug/tracing/ # echo 'p bio_add_page arg1=$arg1' > ./kprobe_events # echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > ./events/kprobes/p_bio_add_page_0/trigger # du -sh /test.txt 12.0K /test.txt # cat /test.txt > /dev/null # cat ./trace # tracer: nop # # entries-in-buffer/entries-written: 128/128 #P:4 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | cat-117 [002] ...1. 1.602243: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x0 cat-117 [002] ...1. 1.602244: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x0 cat-117 [002] ...2. 1.602244: bio_add_page <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...1. 1.602245: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...1. 1.602245: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x1000 cat-117 [002] ...2. 1.602245: bio_add_page <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: __bio_try_merge_page <-bio_add_page object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: __bio_add_page <-bio_add_page object:0xffff88811bee4000 value:0x2000 cat-117 [002] ...1. 1.602245: submit_bio <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602245: submit_bio_noacct <-ext4_mpage_readpages object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: __submit_bio <-submit_bio_noacct object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: submit_bio_checks <-__submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: __cond_resched <-submit_bio_checks object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: should_fail_bio <-submit_bio_checks object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_mq_submit_bio <-submit_bio_noacct object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_attempt_plug_merge <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602246: blk_mq_sched_bio_merge <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __rcu_read_lock <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __rcu_read_unlock <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 cat-117 [002] ...1. 1.602247: __blk_mq_alloc_requests <-blk_mq_submit_bio object:0xffff88811bee4000 value:0x3000 <idle>-0 [002] d..3. 1.602298: bio_endio <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602298: mpage_end_io <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602298: __read_end_io <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: bio_put <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: bio_free <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: mempool_free <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: mempool_free_slab <-blk_update_request object:0xffff88811bee4000 value:0x0 <idle>-0 [002] d..3. 1.602300: kmem_cache_free <-blk_update_request object:0xffff88811bee4000 value:0x0 ... Almost all changelogs were suggested by Masami(mhiramat(a)kernel.org) and steve(rostedt(a)goodmis.org), thank you all so much. v13: - remove the 's' type, since the objtrace event doesn't show the value with sign - change the [3/4] tag with 'selftests/ftrace' instead of 'trace/objtrace' - add 'Documentation:' tag for [4/4] v12: - use the %zu to print the sizeof Reported-by: kernel test robot <lkp(a)intel.com> Suggested-by: Nathan Chancellor <nathan(a)kernel.org> v11: - remove useless atomic counting methods for num_traced_obj - make array objtrace_fetch_types null terminated - add raw_spin_lock_init for obj_data_lock v10: - support ftrace instances - use trace_buffer_lock_reserve instead of trace_event_buffer_lock_reserve - a lot of cleanup work has been done mainly for event_object_trigger_parse v9: - fix objtrace trigger output was incomplete - fix the objtrace trigger was removed when using the existed parameter on event. - add testcase for the second fix above. v8: - revert to use per-cpu recursion for the function trace_object_events_call - recover the filter when getting the value of the object - simplify the implementation for the function get_object_value - fix the build error v7: - use fixed-size array for object pool instead of list structure - use ftrace_test_recursion_trylock for function trace hook function - fix trace_object_ref reference count in the init_trace_object - invoke exit_trace_object no matter whether data->ops->free is null in the unregister_object_trigger - release private_data of event_trigger_data in the trace_object_trigger_free - remove [RFC] tag v6: - change the objtrace trigger syntax. - add patchset description - add <tracefs>/README v5: - add testcasts - add check the field->size - add lockless to search object - describe the object trace more clearly in Kconfig v4: - please ignore the v4 which is the same as v3 v3: - change the objfilter to objtrace - add a command to the objfilter syntax - change to get the value of the object - use trace_find_event_field to find the field instead of using argN - get data from @rec in the event trigger callback funciton v2: - adding a "objfilter" trigger to update object Jeff Xie (4): trace: Add trace any kernel object trace/objtrace: Get the value of the object selftests/ftrace: Add testcases for objtrace Documentation: trace/objtrace: Add documentation for objtrace Documentation/trace/events.rst | 83 +++ include/linux/trace_events.h | 1 + kernel/trace/Kconfig | 10 + kernel/trace/Makefile | 1 + kernel/trace/trace.c | 11 + kernel/trace/trace.h | 21 + kernel/trace/trace_entries.h | 18 + kernel/trace/trace_events_trigger.c | 5 +- kernel/trace/trace_object.c | 611 ++++++++++++++++++ kernel/trace/trace_output.c | 40 ++ .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 ++ 11 files changed, 840 insertions(+), 2 deletions(-) create mode 100644 kernel/trace/trace_object.c create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc base-commit: 408d26e261b089596c0837e71d2fb4a80ea04ef3 -- 2.25.1

2 years, 11 months

4
11
0 0

[PATCH v4 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v4 of the conversion of selftests to KUnit. Since the v3, there have been minor fixes, asked by Javier. Basically, fixes on the SoB chain and addition of Copywrites. Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites not longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan) - Add David's Tested-by tags. v2 -> v3: https://lore.kernel.org/dri-devel/20220621200926.257002-1-maira.canal@usp.b… - Rebase it on top of the drm-misc-next with drm_format_helper KUnit tests. - Change KUNIT_EXPECT_FALSE to KUNIT_EXPECT_EQ on drm_format_test (Daniel Latypov). - Add Daniel's Acked-by tag. v3 -> v4: https://lore.kernel.org/dri-devel/9185aadb-e459-00fe-70be-3675f6f3ef4c@redh… - Add blank line after #include <kunit/test.h> (Javier Martinez Canillas). - Make the order of the tags chronological (Javier Martinez Canillas). - Add Copywrite to the tests (Javier Martinez Canillas). - Add Javier Martinez Canillas's Reviewed-by tag. Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 1 - drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 668 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/Makefile | 4 +- drivers/gpu/drm/tests/drm_buddy_test.c | 750 +++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1080 ++++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 637 +++++++++ .../drm_dp_mst_helper_test.c} | 87 +- drivers/gpu/drm/tests/drm_format_test.c | 287 +++++ .../drm_framebuffer_test.c} | 26 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1136 +++++++--------- .../drm_plane_helper_test.c} | 104 +- .../test-drm_rect.c => tests/drm_rect_test.c} | 125 +- 26 files changed, 3406 insertions(+), 4338 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (72%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (96%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (58%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (62%) rename drivers/gpu/drm/{selftests/test-drm_rect.c => tests/drm_rect_test.c} (53%) -- 2.36.1

2 years, 11 months

3
12
0 0

[PATCH v6 0/5] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. More helpers will be introduced later, as necessary. The job of bpf_verify_pkcs7_signature() is to retrieve the trusted keyring from function parameters, and to perform signature verification by calling verify_pkcs7_signature(). Data and signature can be provided to the new helper with two dynamic pointers, to reduce the number of parameters. The keyring can be provided by its serial, or by its special ID defined in verification.h, if the serial is zero (not a valid value). bpf_verify_pkcs7_signature() also accepts key lookup-specific flags, passed to lookup_user_key() when the helper searches the keyring by its serial. While passing the keyring serial to bpf_verify_pkcs7_signature() provides great flexibility, it seems suboptimal in terms of security guarantees, as even if the eBPF program is assumed to be trusted, that serial might come from untrusted user space not choosing one that the system administrator approves to enforce a mandatory policy. The same goal could be instead more easily achieved by setting a hardcoded keyring ID in the signed eBPF program, to be passed to bpf_verify_pkcs7_signature(). bpf_verify_pkcs7_signature() can be called only from sleepable programs, because of memory allocation (with lookup flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. A test was added to check the ability of bpf_verify_pkcs7_signature() to verify PKCS#7 signatures from the session keyring, a newly-created keyring, and from the primary and secondary keyring (taking the tcp_bic.ko kernel module for the verification). The test does not fail if that kernel module is not found (needs support from the CI). A consideration was made on whether bpf_verify_pkcs7_signature() should be a simple wrapper, doing as little as possible, or whether it could have more complex logic. Having a simple and flexible wrapper requires two additional helpers, bpf_lookup_user_key() and bpf_key_put(), to search and acquire a key reference, pass that key to the wrapper, and release the reference. More care is also required on the eBPF verifier side, to ensure that an eBPF program always releases an acquired reference. While that gives eBPF developers the greatest flexibility to use the helpers as necessary, it does not match the security of the solution of retrieving the key and using it within the same function, as for example in security/keys/keyctl.c. The risk is that an eBPF program requests a key for a purpose, and then uses the key in a different way with one of the available key-related helpers (to be added in the future). struct key is not like a file descriptor, carrying permissions requested during an open, that can be revalidated at the time a read or write is performed. It is more close to a struct inode, the function using the key cannot know reliably which permission was requested at lookup time. For that reason, the key lookup and usage cannot be separated, as the kernel will guarantee (also to other MAC mechanisms) that once a key has been requested with a specific purpose, it will be used accordingly, beyond the control of eBFP programs. The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 makes available for new eBPF helpers some key-related definitions. Patch 3 fixes the helper prototype regular expression to accept unsigned as type prefix. Patch 4 introduces the bpf_verify_pkcs7_signature() helper and patch 5 adds the corresponding test. Changelog v5: - Move KEY_LOOKUP_ to include/linux/key.h for validation of bpf_verify_pkcs7_signature() parameter - Remove bpf_lookup_user_key() and bpf_key_put() helpers, and the corresponding tests - Replace struct key parameter of bpf_verify_pkcs7_signature() with the keyring serial and lookup flags - Call lookup_user_key() and key_put() in bpf_verify_pkcs7_signature() code, to ensure that the retrieved key is used according to the permission requested at lookup time - Clarified keyring precedence in the description of bpf_verify_pkcs7_signature() (suggested by John) - Remove newline in the second argument of ASSERT_ - Fix helper prototype regular expression in bpf_doc.py v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (5): bpf: Export bpf_dynptr_get_size() KEYS: Move KEY_LOOKUP_ to include/linux/key.h scripts: Handle unsigned type prefix in bpf_doc.py bpf: Add bpf_verify_pkcs7_signature() helper selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/linux/key.h | 3 + include/uapi/linux/bpf.h | 24 ++ kernel/bpf/bpf_lsm.c | 63 +++ kernel/bpf/helpers.c | 2 +- scripts/bpf_doc.py | 2 +- security/keys/internal.h | 2 - tools/include/uapi/linux/bpf.h | 24 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../bpf/prog_tests/verify_pkcs7_sig.c | 359 ++++++++++++++++++ .../bpf/progs/test_verify_pkcs7_sig.c | 79 ++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 +++++ 13 files changed, 672 insertions(+), 7 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

2 years, 11 months

3
10
0 0

[PATCH net-next 1/1] net: dsa: mv88e6xxx: allow reading FID when handling ATU violations

by Hans Schultz

For convenience the function mv88e6xxx_g1_atu_op() has been used to read ATU violations, but the function has other purposes and does not enable the possibility to read the FID when reading ATU violations. The FID is needed to get hold of which VID was involved in the violation, thus the need for future purposes to be able to read the FID. Signed-off-by: Hans Schultz <netdev(a)kapio-technology.com> --- drivers/net/dsa/mv88e6xxx/global1_atu.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c index 40bd67a5c8e9..5d120d53823c 100644 --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c @@ -114,6 +114,19 @@ static int mv88e6xxx_g1_atu_op_wait(struct mv88e6xxx_chip *chip) return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_ATU_OP, bit, 0); } +static int mv88e6xxx_g1_read_atu_violation(struct mv88e6xxx_chip *chip) +{ + int err; + + err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_ATU_OP, + MV88E6XXX_G1_ATU_OP_BUSY | + MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + if (err) + return err; + + return mv88e6xxx_g1_atu_op_wait(chip); +} + static int mv88e6xxx_g1_atu_op(struct mv88e6xxx_chip *chip, u16 fid, u16 op) { u16 val; @@ -359,8 +372,7 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id) mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_g1_atu_op(chip, 0, - MV88E6XXX_G1_ATU_OP_GET_CLR_VIOLATION); + err = mv88e6xxx_g1_read_atu_violation(chip); if (err) goto out; -- 2.30.2

2 years, 11 months

4
3
0 0

[PATCH V3 net-next 0/4] Extend locked port feature with FDB locked flag (MAC-Auth/MAB)

by Hans Schultz

This patch set extends the locked port feature for devices that are behind a locked port, but do not have the ability to authorize themselves as a supplicant using IEEE 802.1X. Such devices can be printers, meters or anything related to fixed installations. Instead of 802.1X authorization, devices can get access based on their MAC addresses being whitelisted. For an authorization daemon to detect that a device is trying to get access through a locked port, the bridge will add the MAC address of the device to the FDB with a locked flag to it. Thus the authorization daemon can catch the FDB add event and check if the MAC address is in the whitelist and if so replace the FDB entry without the locked flag enabled, and thus open the port for the device. This feature is known as MAC-Auth or MAC Authentication Bypass (MAB) in Cisco terminology, where the full MAB concept involves additional Cisco infrastructure for authorization. There is no real authentication process, as the MAC address of the device is the only input the authorization daemon, in the general case, has to base the decision if to unlock the port or not. With this patch set, an implementation of the offloaded case is supplied for the mv88e6xxx driver. When a packet ingresses on a locked port, an ATU miss violation event will occur. When handling such ATU miss violation interrupts, the MAC address of the device is added to the FDB with a zero destination port vector (DPV) and the MAC address is communicated through the switchdev layer to the bridge, so that a FDB entry with the locked flag enabled can be added. Hans Schultz (4): net: bridge: add fdb flag to extent locked port feature net: switchdev: add support for offloading of fdb locked flag net: dsa: mv88e6xxx: mac-auth/MAB implementation selftests: forwarding: add test of MAC-Auth Bypass to locked port tests drivers/net/dsa/mv88e6xxx/Makefile | 1 + drivers/net/dsa/mv88e6xxx/chip.c | 40 ++- drivers/net/dsa/mv88e6xxx/chip.h | 5 + drivers/net/dsa/mv88e6xxx/global1.h | 1 + drivers/net/dsa/mv88e6xxx/global1_atu.c | 35 ++- .../net/dsa/mv88e6xxx/mv88e6xxx_switchdev.c | 249 ++++++++++++++++++ .../net/dsa/mv88e6xxx/mv88e6xxx_switchdev.h | 40 +++ drivers/net/dsa/mv88e6xxx/port.c | 32 ++- drivers/net/dsa/mv88e6xxx/port.h | 2 + include/net/dsa.h | 6 + include/net/switchdev.h | 3 +- include/uapi/linux/neighbour.h | 1 + net/bridge/br.c | 3 +- net/bridge/br_fdb.c | 18 +- net/bridge/br_if.c | 1 + net/bridge/br_input.c | 11 +- net/bridge/br_private.h | 9 +- .../net/forwarding/bridge_locked_port.sh | 42 ++- 18 files changed, 470 insertions(+), 29 deletions(-) create mode 100644 drivers/net/dsa/mv88e6xxx/mv88e6xxx_switchdev.c create mode 100644 drivers/net/dsa/mv88e6xxx/mv88e6xxx_switchdev.h -- 2.30.2

2 years, 11 months

7
53
0 0

[PATCH v5 1/4] panic: Taint kernel if tests are run

by David Gow

Most in-kernel tests (such as KUnit tests) are not supposed to run on production systems: they may do deliberately illegal things to trigger errors, and have security implications (for example, KUnit assertions will often deliberately leak kernel addresses). Add a new taint type, TAINT_TEST to signal that a test has been run. This will be printed as 'N' (originally for kuNit, as every other sensible letter was taken.) This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc.) Acked-by: Luis Chamberlain <mcgrof(a)kernel.org> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- Documentation/admin-guide/tainted-kernels.rst | 1 + include/linux/panic.h | 3 ++- kernel/panic.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index ceeed7b0798d..7d80e8c307d1 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -100,6 +100,7 @@ Bit Log Number Reason that got the kernel tainted 15 _/K 32768 kernel has been live patched 16 _/X 65536 auxiliary taint, defined for and used by distros 17 _/T 131072 kernel was built with the struct randomization plugin + 18 _/N 262144 an in-kernel test has been run === === ====== ======================================================== Note: The character ``_`` is representing a blank in this table to make reading diff --git a/include/linux/panic.h b/include/linux/panic.h index e71161da69c4..c7759b3f2045 100644 --- a/include/linux/panic.h +++ b/include/linux/panic.h @@ -68,7 +68,8 @@ static inline void set_arch_panic_timeout(int timeout, int arch_default_timeout) #define TAINT_LIVEPATCH 15 #define TAINT_AUX 16 #define TAINT_RANDSTRUCT 17 -#define TAINT_FLAGS_COUNT 18 +#define TAINT_TEST 18 +#define TAINT_FLAGS_COUNT 19 #define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1) struct taint_flag { diff --git a/kernel/panic.c b/kernel/panic.c index a3c758dba15a..6b3369e21026 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -428,6 +428,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = { [ TAINT_LIVEPATCH ] = { 'K', ' ', true }, [ TAINT_AUX ] = { 'X', ' ', true }, [ TAINT_RANDSTRUCT ] = { 'T', ' ', true }, + [ TAINT_TEST ] = { 'N', ' ', true }, }; /** -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

4
10
0 0

[PATCH v4] kunit: tool: make --kunitconfig repeatable, blindly concat

by Daniel Latypov

It's come up a few times that it would be useful to have --kunitconfig be repeatable [1][2]. This could be done before with a bit of shell-fu, e.g. $ find fs/ -name '.kunitconfig' -exec cat {} + | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin or equivalently: $ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin But this can be fairly clunky to use in practice. And having explicit support in kunit.py opens the door to having more config fragments of interest, e.g. options for PCI on UML [1], UML coverage [2], variants of tests [3]. There's another argument to be made that users can just use multiple --kconfig_add's, but this gets very clunky very fast (e.g. [2]). Note: there's a big caveat here that some kconfig options might be incompatible. We try to give a clearish error message in the simple case where the same option appears multiple times with conflicting values, but more subtle ones (e.g. mutually exclusive options) will be potentially very confusing for the user. I don't know we can do better. Note 2: if you want to combine a --kunitconfig with the default, you either have to do to specify the current build_dir > --kunitconfig=.kunit --kunitconfig=additional.config or > --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config each of which have their downsides (former depends on --build_dir, doesn't work if you don't have a .kunitconfig yet), etc. Example with conflicting values: > $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF > CONFIG_KUNIT_TEST=n > CONFIG_KUNIT=m > EOF > ... > kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig: > CONFIG_KUNIT=y > vs from /dev/stdin > CONFIG_KUNIT=m > > CONFIG_KUNIT_TEST=y > vs from /dev/stdin > # CONFIG_KUNIT_TEST is not set [1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html [2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtU… [3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0s… Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> --- v1 -> v3: merge with kunitconfig refactor patch, rename differing_options() to conflicting_options() v3 -> v4: add Brendan's RB tag, rebase onto the -kselftest kunit branch. The 1/3 and 3/3 of the initial series applied cleanly, but this one didn't, so I'm sending just this one out by itself now. Specifically, there were significant merge conflicts with the --qemu_args patch. --- tools/testing/kunit/kunit.py | 7 ++-- tools/testing/kunit/kunit_config.py | 11 ++++- tools/testing/kunit/kunit_kernel.py | 38 +++++++++++------ tools/testing/kunit/kunit_tool_test.py | 56 ++++++++++++++++++++++---- 4 files changed, 89 insertions(+), 23 deletions(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index b686126afb40..e132b0654029 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -293,8 +293,9 @@ def add_common_opts(parser) -> None: parser.add_argument('--kunitconfig', help='Path to Kconfig fragment that enables KUnit tests.' ' If given a directory, (e.g. lib/kunit), "/.kunitconfig" ' - 'will get automatically appended.', - metavar='PATH') + 'will get automatically appended. If repeated, the files ' + 'blindly concatenated, which might not work in all cases.', + action='append', metavar='PATHS') parser.add_argument('--kconfig_add', help='Additional Kconfig options to append to the ' '.kunitconfig, e.g. CONFIG_KASAN=y. Can be repeated.', @@ -381,7 +382,7 @@ def tree_from_args(cli_args: argparse.Namespace) -> kunit_kernel.LinuxSourceTree qemu_args.extend(shlex.split(arg)) return kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 898b2a35eb29..48b5f34b2e5d 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import Dict, Iterable, Set +from typing import Dict, Iterable, List, Set, Tuple CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -60,6 +60,15 @@ class Kconfig: return False return True + def conflicting_options(self, other: 'Kconfig') -> List[Tuple[KconfigEntry, KconfigEntry]]: + diff = [] # type: List[Tuple[KconfigEntry, KconfigEntry]] + for name, value in self._entries.items(): + b = other._entries.get(name) + if b and value != b: + pair = (KconfigEntry(name, value), KconfigEntry(name, b)) + diff.append(pair) + return diff + def merge_in_entries(self, other: 'Kconfig') -> None: for name, value in other._entries.items(): self._entries[name] = value diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 94ec9f65ef19..56492090e28e 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -177,6 +177,30 @@ def get_kunitconfig_path(build_dir: str) -> str: def get_old_kunitconfig_path(build_dir: str) -> str: return os.path.join(build_dir, OLD_KUNITCONFIG_PATH) +def get_parsed_kunitconfig(build_dir: str, + kunitconfig_paths: Optional[List[str]]=None) -> kunit_config.Kconfig: + if not kunitconfig_paths: + path = get_kunitconfig_path(build_dir) + if not os.path.exists(path): + shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, path) + return kunit_config.parse_file(path) + + merged = kunit_config.Kconfig() + + for path in kunitconfig_paths: + if os.path.isdir(path): + path = os.path.join(path, KUNITCONFIG_PATH) + if not os.path.exists(path): + raise ConfigError(f'Specified kunitconfig ({path}) does not exist') + + partial = kunit_config.parse_file(path) + diff = merged.conflicting_options(partial) + if diff: + diff_str = '\n\n'.join(f'{a}\n vs from {path}\n{b}' for a, b in diff) + raise ConfigError(f'Multiple values specified for {len(diff)} options in kunitconfig:\n{diff_str}') + merged.merge_in_entries(partial) + return merged + def get_outfile_path(build_dir: str) -> str: return os.path.join(build_dir, OUTFILE_PATH) @@ -221,7 +245,7 @@ class LinuxSourceTree: def __init__( self, build_dir: str, - kunitconfig_path='', + kunitconfig_paths: Optional[List[str]]=None, kconfig_add: Optional[List[str]]=None, arch=None, cross_compile=None, @@ -238,17 +262,7 @@ class LinuxSourceTree: qemu_config_path = _default_qemu_config_path(self._arch) _, self._ops = _get_qemu_ops(qemu_config_path, extra_qemu_args, cross_compile) - if kunitconfig_path: - if os.path.isdir(kunitconfig_path): - kunitconfig_path = os.path.join(kunitconfig_path, KUNITCONFIG_PATH) - if not os.path.exists(kunitconfig_path): - raise ConfigError(f'Specified kunitconfig ({kunitconfig_path}) does not exist') - else: - kunitconfig_path = get_kunitconfig_path(build_dir) - if not os.path.exists(kunitconfig_path): - shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, kunitconfig_path) - - self._kconfig = kunit_config.parse_file(kunitconfig_path) + self._kconfig = get_parsed_kunitconfig(build_dir, kunitconfig_paths) if kconfig_add: kconfig = kunit_config.parse_from_string('\n'.join(kconfig_add)) self._kconfig.merge_in_entries(kconfig) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index e56544d58147..ad63d0d34f3f 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -356,17 +356,46 @@ class LinuxSourceTreeTest(unittest.TestCase): def test_invalid_kunitconfig(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'nonexistent.* does not exist'): - kunit_kernel.LinuxSourceTree('', kunitconfig_path='/nonexistent_file') + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=['/nonexistent_file']) def test_valid_kunitconfig(self): with tempfile.NamedTemporaryFile('wt') as kunitconfig: - kunit_kernel.LinuxSourceTree('', kunitconfig_path=kunitconfig.name) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[kunitconfig.name]) def test_dir_kunitconfig(self): with tempfile.TemporaryDirectory('') as dir: with open(os.path.join(dir, '.kunitconfig'), 'w'): pass - kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir]) + + def test_multiple_kunitconfig(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('KUNIT', 'y') + want_kconfig.add_entry('KUNIT_TEST', 'm') + + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT_TEST=m') + pass + + tree = kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + self.assertTrue(want_kconfig.is_subset_of(tree._kconfig), msg=tree._kconfig) + + + def test_multiple_kunitconfig_invalid(self): + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT=m') + + with self.assertRaisesRegex(kunit_kernel.ConfigError, '(?s)Multiple values.*CONFIG_KUNIT'): + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + def test_kconfig_add(self): want_kconfig = kunit_config.Kconfig() @@ -636,7 +665,7 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['run', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. self.mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, @@ -647,18 +676,31 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['config', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. self.mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, qemu_config_path=None, extra_qemu_args=[]) + @mock.patch.object(kunit_kernel, 'LinuxSourceTree') + def test_run_multiple_kunitconfig(self, mock_linux_init): + mock_linux_init.return_value = self.linux_source_mock + kunit.main(['run', '--kunitconfig=mykunitconfig', '--kunitconfig=other']) + # Just verify that we parsed and initialized it correctly here. + mock_linux_init.assert_called_once_with('.kunit', + kunitconfig_paths=['mykunitconfig', 'other'], + kconfig_add=None, + arch='um', + cross_compile=None, + qemu_config_path=None, + extra_qemu_args=[]) + def test_run_kconfig_add(self): kunit.main(['run', '--kconfig_add=CONFIG_KASAN=y', '--kconfig_add=CONFIG_KCSAN=y']) # Just verify that we parsed and initialized it correctly here. self.mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path=None, + kunitconfig_paths=None, kconfig_add=['CONFIG_KASAN=y', 'CONFIG_KCSAN=y'], arch='um', cross_compile=None, @@ -669,7 +711,7 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['run', '--arch=x86_64', '--qemu_args', '-m 2048']) # Just verify that we parsed and initialized it correctly here. self.mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path=None, + kunitconfig_paths=None, kconfig_add=None, arch='x86_64', cross_compile=None, base-commit: 1d202d1496a0be94100d8cbc2b658dcd980a3edf -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

1
0
0 0

[PATCH] selftests/kvm: Add error messages before skipping tests in vm_xsave_req_perm()

by Gautam Menghani

Add messages in the checks that are performed before making a request with ARCH_REQ_XCOMP_GUEST_PERM. Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/kvm/lib/x86_64/processor.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/x86_64/processor.c b/tools/testing/selftests/kvm/lib/x86_64/processor.c index ead7011ee8f6..c74e846661b7 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/processor.c +++ b/tools/testing/selftests/kvm/lib/x86_64/processor.c @@ -643,11 +643,15 @@ void vm_xsave_req_perm(int bit) if (rc == -1 && (errno == ENXIO || errno == EINVAL)) exit(KSFT_SKIP); TEST_ASSERT(rc == 0, "KVM_GET_DEVICE_ATTR(0, KVM_X86_XCOMP_GUEST_SUPP) error: %ld", rc); - if (!(bitmask & (1ULL << bit))) + if (!(bitmask & (1ULL << bit))) { + print_skip("Userspace address of attr data is blank"); exit(KSFT_SKIP); + } - if (!is_xfd_supported()) + if (!is_xfd_supported()) { + print_skip("XFD is not supported"); exit(KSFT_SKIP); + } rc = syscall(SYS_arch_prctl, ARCH_REQ_XCOMP_GUEST_PERM, bit); -- 2.36.1

2 years, 11 months

2
1
0 0

[PATCH bpf-next v10 0/6] New BPF helpers to accelerate synproxy

by Maxim Mikityanskiy

The first patch of this series is a documentation fix. The second patch allows BPF helpers to accept memory regions of fixed size without doing runtime size checks. The two next patches add new functionality that allows XDP to accelerate iptables synproxy. v1 of this series [1] used to include a patch that exposed conntrack lookup to BPF using stable helpers. It was superseded by series [2] by Kumar Kartikeya Dwivedi, which implements this functionality using unstable helpers. The third patch adds new helpers to issue and check SYN cookies without binding to a socket, which is useful in the synproxy scenario. The fourth patch adds a selftest, which includes an XDP program and a userspace control application. The XDP program uses socketless SYN cookie helpers and queries conntrack status instead of socket status. The userspace control application allows to tune parameters of the XDP program. This program also serves as a minimal example of usage of the new functionality. The last two patches expose the new helpers to TC BPF and extend the selftest. The draft of the new functionality was presented on Netdev 0x15 [3]. v2 changes: Split into two series, submitted bugfixes to bpf, dropped the conntrack patches, implemented the timestamp cookie in BPF using bpf_loop, dropped the timestamp cookie patch. v3 changes: Moved some patches from bpf to bpf-next, dropped the patch that changed error codes, split the new helpers into IPv4/IPv6, added verifier functionality to accept memory regions of fixed size. v4 changes: Converted the selftest to the test_progs runner. Replaced some deprecated functions in xdp_synproxy userspace helper. v5 changes: Fixed a bug in the selftest. Added questionable functionality to support new helpers in TC BPF, added selftests for it. v6 changes: Wrap the new helpers themselves into #ifdef CONFIG_SYN_COOKIES, replaced fclose with pclose and fixed the MSS for IPv6 in the selftest. v7 changes: Fixed the off-by-one error in indices, changed the section name to "xdp", added missing kernel config options to vmtest in CI. v8 changes: Properly rebased, dropped the first patch (the same change was applied by someone else), updated the cover letter. v9 changes: Fixed selftests for no_alu32. v10 changes: Selftests for s390x were blacklisted due to lack of support of kfunc, rebased the series, split selftests to separate commits, created ARG_PTR_TO_FIXED_SIZE_MEM and packed arg_size, addressed the rest of comments. [1]: https://lore.kernel.org/bpf/20211020095815.GJ28644@breakpoint.cc/t/ [2]: https://lore.kernel.org/bpf/20220114163953.1455836-1-memxor@gmail.com/ [3]: https://netdevconf.info/0x15/session.html?Accelerating-synproxy-with-XDP Maxim Mikityanskiy (6): bpf: Fix documentation of th_len in bpf_tcp_{gen,check}_syncookie bpf: Allow helpers to accept pointers with a fixed size bpf: Add helpers to issue and check SYN cookies in XDP selftests/bpf: Add selftests for raw syncookie helpers bpf: Allow the new syncookie helpers to work with SKBs selftests/bpf: Add selftests for raw syncookie helpers in TC mode include/linux/bpf.h | 13 + include/net/tcp.h | 1 + include/uapi/linux/bpf.h | 88 +- kernel/bpf/verifier.c | 43 +- net/core/filter.c | 128 +++ net/ipv4/tcp_input.c | 3 +- scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 88 +- tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/Makefile | 3 +- .../selftests/bpf/prog_tests/xdp_synproxy.c | 183 ++++ .../selftests/bpf/progs/xdp_synproxy_kern.c | 833 ++++++++++++++++++ tools/testing/selftests/bpf/xdp_synproxy.c | 466 ++++++++++ 13 files changed, 1833 insertions(+), 21 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_synproxy.c create mode 100644 tools/testing/selftests/bpf/progs/xdp_synproxy_kern.c create mode 100644 tools/testing/selftests/bpf/xdp_synproxy.c -- 2.30.2

2 years, 11 months

4
9
0 0

[PATCH v2] kunit: tool: Enable virtio/PCI by default on UML

by David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Tested-by: José Expósito <jose.exposito89(a)gmail.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- NOTE: This depends on the refactor kconfig handling & repeatable --kunitconfig series here: https://lore.kernel.org/linux-kselftest/20220627221446.82157-1-dlatypov@goo… https://patchwork.kernel.org/project/linux-kselftest/list/?series=654332 Please apply those first. Changes since v1: https://lore.kernel.org/linux-kselftest/20220624084400.1454579-1-davidgow@g… - (Hopefully) fix a pytype warning re: architecture being None in the tests. (Thanks, Daniel) - Rebase on top of the new combined v3 of the kconfig/kunitconfig patchset. - Add José's Tested-by and Daniel's Reviewed-by. Changes since RFC: https://lore.kernel.org/linux-kselftest/20220622035326.759935-1-davidgow@go… - Rebase on top of the previous kconfig patches. - Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan) - Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed. --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 14 ++++++++++---- tools/testing/kunit/kunit_tool_test.py | 12 ++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index f65c996127c3..2698d4c51e6e 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) kconfig.merge_in_entries(base_kunitconfig) return kconfig @@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig + def make_allyesconfig(self, build_dir: str, make_options) -> None: kunit_parser.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -297,7 +303,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -328,7 +334,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 0c5ba3ed35e6..6b8887c79c50 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # Should generate the .config @@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() self.assertTrue(tree.build_reconfig(build_dir, make_options=[])) @@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations('none', None) mock_build_config = mock.patch.object(tree, 'build_config').start() # ... so we should trigger a call to build_config() -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

2
1
0 0

[PATCH v3 1/3] kunit: tool: refactor internal kconfig handling, allow overriding

by Daniel Latypov

Currently, you cannot ovewrwrite what's in your kunitconfig via --kconfig_add. Nor can you override something in a qemu_config via either means. This patch makes it so we have this level of priority * --kconfig_add * kunitconfig file (the default or the one from --kunitconfig) * qemu_config The rationale for this order is that the more "dynamic" sources of kconfig options should take priority. --kconfig_add is obviously the most dynamic. And for kunitconfig, users probably tweak the file manually or specify --kunitconfig more often than they delve into qemu_config python files. And internally, we convert the kconfigs from a python list into a set or dict fairly often. We should just use a dict internally. We exposed the set transform in the past since we didn't define __eq__, so also take the chance to shore up the kunit_kconfig.Kconfig interface. Example ======= Let's consider the unrealistic example where someone would want to disable CONFIG_KUNIT. I.e. they run $ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n Before ------ We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: # CONFIG_KUNIT is not set After ----- We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: David Gow <davidgow(a)google.com> --- v1 -> v2: fix validate_config() func. There was a bug found by David, see https://lore.kernel.org/linux-kselftest/CAGS_qxpF338dvbB+6QW1n8_agddeS10+nk… v2 -> v3: remove `set_diff()` helper, merge into other kunitconfig series --- tools/testing/kunit/kunit_config.py | 45 ++++++++++++++------------ tools/testing/kunit/kunit_kernel.py | 20 ++++++------ tools/testing/kunit/kunit_tool_test.py | 45 +++++++++++--------------- 3 files changed, 54 insertions(+), 56 deletions(-) diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 75a8dc1683d4..898b2a35eb29 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import List, Set +from typing import Dict, Iterable, Set CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -32,35 +32,42 @@ class Kconfig: """Represents defconfig or .config specified using the Kconfig language.""" def __init__(self) -> None: - self._entries = [] # type: List[KconfigEntry] + self._entries = {} # type: Dict[str, str] - def entries(self) -> Set[KconfigEntry]: - return set(self._entries) + def __eq__(self, other) -> bool: + if not isinstance(other, self.__class__): + return False + return self._entries == other._entries - def add_entry(self, entry: KconfigEntry) -> None: - self._entries.append(entry) + def __repr__(self) -> str: + return ','.join(str(e) for e in self.as_entries()) + + def as_entries(self) -> Iterable[KconfigEntry]: + for name, value in self._entries.items(): + yield KconfigEntry(name, value) + + def add_entry(self, name: str, value: str) -> None: + self._entries[name] = value def is_subset_of(self, other: 'Kconfig') -> bool: - other_dict = {e.name: e.value for e in other.entries()} - for a in self.entries(): - b = other_dict.get(a.name) + for name, value in self._entries.items(): + b = other._entries.get(name) if b is None: - if a.value == 'n': + if value == 'n': continue return False - if a.value != b: + if value != b: return False return True def merge_in_entries(self, other: 'Kconfig') -> None: - if other.is_subset_of(self): - return - self._entries = list(self.entries().union(other.entries())) + for name, value in other._entries.items(): + self._entries[name] = value def write_to_file(self, path: str) -> None: with open(path, 'a+') as f: - for entry in self.entries(): - f.write(str(entry) + '\n') + for e in self.as_entries(): + f.write(str(e) + '\n') def parse_file(path: str) -> Kconfig: with open(path, 'r') as f: @@ -78,14 +85,12 @@ def parse_from_string(blob: str) -> Kconfig: match = config_matcher.match(line) if match: - entry = KconfigEntry(match.group(1), match.group(2)) - kconfig.add_entry(entry) + kconfig.add_entry(match.group(1), match.group(2)) continue empty_match = is_not_set_matcher.match(line) if empty_match: - entry = KconfigEntry(empty_match.group(1), 'n') - kconfig.add_entry(entry) + kconfig.add_entry(empty_match.group(1), 'n') continue if line[0] == '#': diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..4115781185e1 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -53,8 +53,8 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: - pass + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: raise ConfigError('Only the "um" arch is supported for alltests') @@ -109,9 +109,10 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) - base_kunitconfig.merge_in_entries(kconfig) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig def start(self, params: List[str], build_dir: str) -> subprocess.Popen: kernel_path = os.path.join(build_dir, self._kernel_path) @@ -267,10 +268,10 @@ class LinuxSourceTree: validated_kconfig = kunit_config.parse_file(kconfig_path) if self._kconfig.is_subset_of(validated_kconfig): return True - invalid = self._kconfig.entries() - validated_kconfig.entries() + missing = set(self._kconfig.as_entries()) - set(validated_kconfig.as_entries()) message = 'Not all Kconfig options selected in kunitconfig were in the generated .config.\n' \ 'This is probably due to unsatisfied dependencies.\n' \ - 'Missing: ' + ', '.join([str(e) for e in invalid]) + 'Missing: ' + ', '.join(str(e) for e in missing) if self._arch == 'um': message += '\nNote: many Kconfig options aren\'t available on UML. You can try running ' \ 'on a different architecture with something like "--arch=x86_64".' @@ -282,7 +283,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -303,7 +304,7 @@ class LinuxSourceTree: return True old_kconfig = kunit_config.parse_file(old_path) - return old_kconfig.entries() != self._kconfig.entries() + return old_kconfig != self._kconfig def build_reconfig(self, build_dir: str, make_options) -> bool: """Creates a new .config if it is not a subset of the .kunitconfig.""" @@ -313,7 +314,8 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True print('Regenerating .config ...') diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 25a2eb3bf114..0fbca18b6e65 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -45,7 +45,7 @@ class KconfigTest(unittest.TestCase): self.assertTrue(kconfig0.is_subset_of(kconfig0)) kconfig1 = kunit_config.Kconfig() - kconfig1.add_entry(kunit_config.KconfigEntry('TEST', 'y')) + kconfig1.add_entry('TEST', 'y') self.assertTrue(kconfig1.is_subset_of(kconfig1)) self.assertTrue(kconfig0.is_subset_of(kconfig1)) self.assertFalse(kconfig1.is_subset_of(kconfig0)) @@ -56,40 +56,28 @@ class KconfigTest(unittest.TestCase): kconfig = kunit_config.parse_file(kconfig_path) expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) - - self.assertEqual(kconfig.entries(), expected_kconfig.entries()) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') + + self.assertEqual(kconfig, expected_kconfig) def test_write_to_file(self): kconfig_path = os.path.join(test_tmpdir, '.config') expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') expected_kconfig.write_to_file(kconfig_path) actual_kconfig = kunit_config.parse_file(kconfig_path) - - self.assertEqual(actual_kconfig.entries(), - expected_kconfig.entries()) + self.assertEqual(actual_kconfig, expected_kconfig) class KUnitParserTest(unittest.TestCase): @@ -381,8 +369,11 @@ class LinuxSourceTreeTest(unittest.TestCase): kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) def test_kconfig_add(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('NOT_REAL', 'y') + tree = kunit_kernel.LinuxSourceTree('', kconfig_add=['CONFIG_NOT_REAL=y']) - self.assertIn(kunit_config.KconfigEntry('NOT_REAL', 'y'), tree._kconfig.entries()) + self.assertTrue(want_kconfig.is_subset_of(tree._kconfig), msg=tree._kconfig) def test_invalid_arch(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'not a valid arch, options are.*x86_64'): base-commit: 274295c6e53f8b8b8dfa8b24a3fcb8a9d670c22c -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

2
5
0 0

[PATCH 0/3] kunit: add support in kunit.py for --qemu_args

by Daniel Latypov

Note: this series applies on top of https://lore.kernel.org/linux-kselftest/20220516194730.1546328-2-dlatypov@g…. That patch greatly simplified the process of adding new flags. This flag would let users pass additional arguments to QEMU when using a non-UML arch to run their tests. E.g. for kcsan's tests, they require SMP and with this patch, you can do $ ./tools/testing/kunit/kunit.py run --kconfig_add=CONFIG_SMP --qemu_args='-smp 8' This is proposed as an alternative to users manually creating new qemu_config python files and also to [1], where we discussed checking in a new x86_64 variant w/ `-smp 8` hard-coded into it. This patch also contains a fix to the example `run_kunit` bash function since it didn't quote properly and would parse the example above as --qemu_args='-smp' '8' no matter how you tried to quote your arguments. [1] https://lore.kernel.org/linux-kselftest/20220518073232.526443-1-davidgow@go… Daniel Latypov (3): Documentation: kunit: fix example run_kunit func to allow spaces in args kunit: tool: simplify creating LinuxSourceTreeOperations kunit: tool: introduce --qemu_args .../dev-tools/kunit/running_tips.rst | 2 +- tools/testing/kunit/kunit.py | 14 +++++++++- tools/testing/kunit/kunit_kernel.py | 26 +++++++++++-------- tools/testing/kunit/kunit_tool_test.py | 20 +++++++++++--- 4 files changed, 46 insertions(+), 16 deletions(-) -- 2.36.1.124.g0e6072fb45-goog

2 years, 11 months

3
9
0 0

[PATCH v2] kunit: tool: cosmetic: don't specify duplicate kernel cmdline options

by Daniel Latypov

Context: When using a non-UML arch, kunit.py will boot the test kernel with options like these by default (this is x86_64): > mem=1G console=tty kunit_shutdown=halt console=ttyS0 kunit_shutdown=reboot The first three options are added unconditionally but are only intended for UML. 1. 'mem=1G' is redundant with the '-m 1024' that we hard-code into the qemu commandline. 2. We specify a 'console' for all tools/testing/kunit/qemu_configs/*.py already, so 'console=tty' gets overwritten. 3. For QEMU, we need to use 'reboot', and for UML we need to use 'halt'. If you switch them, kunit.py will hang until the --timeout expires. This patch: Having these duplicate options is a bit noisy. Switch so we only add UML-specific options for UML. I.e. we now get UML: 'mem=1G console=tty kunit_shutdown=halt' (unchanged) x86_64: 'console=ttyS0 kunit_shutdown=reboot' Side effect: you can't overwrite these options on UML w/ --kernel_arg. But you already couldn't for QEMU (console, kunit_shutdown), and why would you want to? Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: David Gow <davidgow(a)google.com> --- v1 -> v2: Remove other UML-specific args from other arches. I.e. also only specify "mem=1G and console=tty" for UML. --- tools/testing/kunit/kunit_kernel.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 1b9c4922a675..8945640b5063 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -160,6 +160,7 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def start(self, params: List[str], build_dir: str) -> subprocess.Popen: """Runs the Linux UML binary. Must be named 'linux'.""" linux_bin = os.path.join(build_dir, 'linux') + params.extend(['mem=1G', 'console=tty', 'kunit_shutdown=halt']) return subprocess.Popen([linux_bin] + params, stdin=subprocess.PIPE, stdout=subprocess.PIPE, @@ -334,7 +335,6 @@ class LinuxSourceTree(object): def run_kernel(self, args=None, build_dir='', filter_glob='', timeout=None) -> Iterator[str]: if not args: args = [] - args.extend(['mem=1G', 'console=tty', 'kunit_shutdown=halt']) if filter_glob: args.append('kunit.filter_glob='+filter_glob) base-commit: 9660209d9418f2295d31fea0d32e313e9b2c1200 -- 2.36.0.550.gb090851708-goog

2 years, 11 months

2
1
0 0

[PATCH v2] selftests/vm: enable running select groups of tests

by Joel Savitz

Our memory management kernel CI testing at Red Hat uses the VM selftests and we have run into two problems: First, our LTP tests overlap with the VM selftests. We want to avoid unhelpful redundancy in our testing practices. Second, we have observed the current run_vmtests.sh to report overall failure/ambiguous results in the case that a machine lacks the necessary hardware to perform one or more of the tests. E.g. ksm tests that require more than one numa node. We want to be able to run the vm selftests suitable to particular hardware. Add the ability to run one or more groups of vm tests via run_vmtests.sh instead of simply all-or-none in order to solve these problems. Preserve existing default behavior of running all tests when the script is invoked with no arguments. Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h | -t "<categories>"] -t: specify specific categories to tests to run -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by passing a string to the -t argument containing one or more of the following categories separated by spaces: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes example: ./run_vmtests.sh -t "hmm mmap ksm" Changes from v1: - use a command line argument to pass the test categories to the script instead of an environmet variable - remove novel prints to avoid messing with extant parsers of this script - update the usage text Signed-off-by: Joel Savitz <jsavitz(a)redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 225 +++++++++++++++------- 1 file changed, 152 insertions(+), 73 deletions(-) diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index 41fce8bea929..c12298bf473d 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,6 +1,6 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 @@ -8,15 +8,73 @@ ksft_skip=4 mnt=./huge exitcode=0 -#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +usage() { + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h | -t "<categories>"] + -t: specify specific categories to tests to run + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by passing a string +to the -t argument containing one or more of the following categories +separated by spaces: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +example: ./run_vmtests.sh -t "hmm mmap ksm" +EOF + exit 0 +} + + +while getopts "ht:" OPT; do + case ${OPT} in + "h") usage ;; + "t") TEST_ITEMS=${OPTARG} ;; + esac +done +shift $((OPTIND -1)) + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then # Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +86,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024)) -#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,126 +125,137 @@ else exit 1 fi -#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1 # Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + fi # test_selected } -mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi -run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall -run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb -run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap -run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap -run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test -echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi -run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace # get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000 -run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 # Test requires source and destination huge pages. Size of source # (half_ufd_size_MB) is passed as argument to test. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd shmem 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi -run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test -run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit -run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate -run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test -run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests -run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test -run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test -run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test - run_test ./va_128TBswitch + CATEGORY="hugevm" run_test ./va_128TBswitch fi # VADDR64 # vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke -run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap -run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate -run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret # KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0 exit $exitcode -- 2.31.1

2 years, 11 months

1
0
0 0

[PATCH 1/3] kunit: tool: drop unused load_config argument

by Daniel Latypov

It's always set to true except in one test case. And in that test case it can safely be set to true anyways. Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- tools/testing/kunit/kunit_kernel.py | 4 ---- tools/testing/kunit/kunit_tool_test.py | 2 +- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..8bc8305ba817 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -219,7 +219,6 @@ class LinuxSourceTree: def __init__( self, build_dir: str, - load_config=True, kunitconfig_path='', kconfig_add: Optional[List[str]]=None, arch=None, @@ -233,9 +232,6 @@ class LinuxSourceTree: self._arch = 'um' if arch is None else arch self._ops = get_source_tree_ops(self._arch, cross_compile) - if not load_config: - return - if kunitconfig_path: if os.path.isdir(kunitconfig_path): kunitconfig_path = os.path.join(kunitconfig_path, KUNITCONFIG_PATH) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 25a2eb3bf114..b9158017ece6 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -393,7 +393,7 @@ class LinuxSourceTreeTest(unittest.TestCase): return subprocess.Popen(['echo "hi\nbye"'], shell=True, text=True, stdout=subprocess.PIPE) with tempfile.TemporaryDirectory('') as build_dir: - tree = kunit_kernel.LinuxSourceTree(build_dir, load_config=False) + tree = kunit_kernel.LinuxSourceTree(build_dir) mock.patch.object(tree._ops, 'start', side_effect=fake_start).start() with self.assertRaises(ValueError): base-commit: 8a7ccad38f8b25c8202efd69371a022357286400 -- 2.36.1.124.g0e6072fb45-goog

2 years, 11 months

3
10
0 0

[PATCH] kunit: use kmemdup in kunit_filter_tests(), take suite as const

by Daniel Latypov

kmemdup() is easier than kmalloc() + memcpy(), per lkp bot. Also make the input `suite` as const since we're now always making copies after commit a127b154a8f2 ("kunit: tool: allow filtering test cases via glob"). Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- lib/kunit/executor.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 2f73a6a35a7e..43e15112460a 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -55,7 +55,7 @@ static void kunit_parse_filter_glob(struct kunit_test_filter *parsed, /* Create a copy of suite with only tests that match test_glob. */ static struct kunit_suite * -kunit_filter_tests(struct kunit_suite *const suite, const char *test_glob) +kunit_filter_tests(const struct kunit_suite *const suite, const char *test_glob) { int n = 0; struct kunit_case *filtered, *test_case; @@ -69,11 +69,9 @@ kunit_filter_tests(struct kunit_suite *const suite, const char *test_glob) if (n == 0) return NULL; - /* Use memcpy to workaround copy->name being const. */ - copy = kmalloc(sizeof(*copy), GFP_KERNEL); + copy = kmemdup(suite, sizeof(*copy), GFP_KERNEL); if (!copy) return ERR_PTR(-ENOMEM); - memcpy(copy, suite, sizeof(*copy)); filtered = kcalloc(n + 1, sizeof(*filtered), GFP_KERNEL); if (!filtered) base-commit: 9660209d9418f2295d31fea0d32e313e9b2c1200 -- 2.36.0.550.gb090851708-goog

2 years, 11 months

3
2
0 0

[PATCH] kunit: Documentation: Fix a kernel-doc reference

by David Gow

When building the KUnit documentation, the reference to kunit_test_suites in the kunit_test_init_section_suites kernel-doc comment gives an error: Documentation/dev-tools/kunit/api/test:9: ./include/kunit/test.h:323: WARNING: Inline interpreted text or phrase reference start-string without end-string. This is because the reference is mixing two function reference styles: adding an '&' to the front, and "()" to the end. The latter is neater, so get rid of the '&'. Fixes: 9bf2eed995f9 ("kunit: add support for kunit_suites that reference init code") Signed-off-by: David Gow <davidgow(a)google.com> --- (As a KUnit patch, we'll accept this via the KUnit tree.) --- include/kunit/test.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 8ffcd7de9607..f1c1a95df9b8 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -320,7 +320,7 @@ static inline int kunit_run_all_tests(void) * * @__suites: a statically allocated list of &struct kunit_suite. * - * This functions identically as &kunit_test_suites() except that it suppresses + * This functions identically as kunit_test_suites() except that it suppresses * modpost warnings for referencing functions marked __init or data marked * __initdata; this is OK because currently KUnit only runs tests upon boot * during the init phase or upon loading a module during the init phase. -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

2
1
0 0

[PATCH] Documentation: kunit: Cleanup run_wrapper, fix x-ref

by David Gow

The "Run Tests on qemu" section of run_wrapper.rst had a few issues left over from the last big documentation refactor[1]: - It referenced a run_uml.rst page, which was integrated into the other pages (including run_wrapper.rst). - It skimmed over the use of --arch= and --cross_compile= in favour of using a custom --qemu_config. Since most users will want to use the former, let's give examples. Remove the reference to the non-existant page, and add a couple of examples to encourage the use of --arch= and --cross_compile=. With this change, there should be no more broken references in the KUnit documentation (i.e., the one mentioned in [2] is gone). [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… [2]: https://lore.kernel.org/linux-doc/cover.1656234456.git.mchehab@kernel.org/ Signed-off-by: David Gow <davidgow(a)google.com> --- Thanks, Mauro, for noticing this in [2]: for whatever reason my version of Sphinx wasn't warning on it. Unless anyone objects, I'll add this to the list of things to be taken in via the kunit/kunit-fixes tree. Cheers, -- David --- Documentation/dev-tools/kunit/run_wrapper.rst | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 653985ce9cae..a695f58cd64e 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -192,6 +192,20 @@ via UML. To run tests on qemu, by default it requires two flags: if we have downloaded the microblaze toolchain from the 0-day website to a directory in our home directory called toolchains. +This means that for most architectures, running under qemu is as simple as: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run --arch=x86_64 + +If a special toolchain is required, it can be slightly more complicated: + +.. code-block:: bash + + ./tools/testing/kunit/kunit.py run \ + --arch=s390 \ + --cross_compile=s390x-linux-gnu- + If we want to run KUnit tests on an architecture not supported by the ``--arch`` flag, or want to run KUnit tests on qemu using a non-default configuration; then we can write our own``QemuConfig``. @@ -214,9 +228,6 @@ as --jobs=12 \ --qemu_config=./tools/testing/kunit/qemu_configs/x86_64.py -To run existing KUnit tests on non-UML architectures, see: -Documentation/dev-tools/kunit/non_uml.rst. - Command-Line Arguments ====================== -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 11 months

4
6
0 0

[net-next v4 0/4] seg6: add support for SRv6 Headend Reduced Encapsulation

by Andrea Mayer

This patchset adds support for SRv6 Headend behavior with Reduced Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1]. In details, the patchset is made of: - patch 1/4: add support for SRv6 H.Encaps.Red behavior; - Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior; - patch 2/4: add selftest for SRv6 H.Encaps.Red behavior; - patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior. The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and H.L2Encaps.Red behaviors is provided in a separated patchset. [1] - https://datatracker.ietf.org/doc/html/rfc8986 v3 -> v4: - Add selftests to the Makefile, thanks to Jakub Kicinski. v2 -> v3: - Keep SRH when HMAC TLV is present; - Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two patches (respectively, patch 1/4 and patch 2/4); - Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red. v1 -> v2: - Fixed sparse warnings; - memset now uses sizeof() instead of hardcoded value; - Removed EXPORT_SYMBOL_GPL. Andrea Mayer (4): seg6: add support for SRv6 H.Encaps.Red behavior seg6: add support for SRv6 H.L2Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.L2Encaps.Red behavior include/uapi/linux/seg6_iptunnel.h | 2 + net/ipv6/seg6_iptunnel.c | 138 +++- tools/testing/selftests/net/Makefile | 2 + .../net/srv6_hencap_red_l3vpn_test.sh | 742 ++++++++++++++++++ .../net/srv6_hl2encap_red_l2vpn_test.sh | 674 ++++++++++++++++ 5 files changed, 1556 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh create mode 100755 tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh -- 2.20.1

2 years, 12 months

2
9
0 0

Re: [PATCH 2/2] kvm: rename KVM_MAX_VCPU_ID to, KVM_MAX_VCPU_IDS

by Christian Zigotzky

Hello Juergen, Hello All, Since the RC1 of kernel 5.13, -smp 2 and -smp 4 don't work with a virtual e5500 QEMU KVM-HV machine anymore. [1] I see in the serial console, that the uImage doesn't load. I use the following QEMU command for booting: qemu-system-ppc64 -M ppce500 -cpu e5500 -enable-kvm -m 1024 -kernel uImage -drive format=raw,file=MintPPC32-X5000.img,index=0,if=virtio -netdev user,id=mynet0 -device virtio-net,netdev=mynet0 -append "rw root=/dev/vda" -device virtio-vga -device virtio-mouse-pci -device virtio-keyboard-pci -device pci-ohci,id=newusb -device usb-audio,bus=newusb.0 -smp 4 The kernels boot without KVM-HV. Summary for KVM-HV: -smp 1 -> works -smp 2 -> doesn't work -smp 3 -> works -smp 4 -> doesn't work I used -smp 4 before the RC1 of kernel 5.13 because my FSL P5040 BookE machine [2] has 4 cores. Does this patch solve this issue? [3] Thanks, Christian [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-May/229103.html [2] http://wiki.amiga.org/index.php?title=X5000 [3] https://lists.ozlabs.org/pipermail/linuxppc-dev/2021-September/234152.html

2 years, 12 months

1
1
0 0

[PATCH v11 0/2] Introduce XSAVE feature self-test

by Pengfei Xu

The XSAVE feature set supports the saving and restoring of xstate components. XSAVE feature has been used for process context switching. XSAVE components include x87 state for FP execution environment, SSE state, AVX state and so on. In order to ensure that XSAVE works correctly, add XSAVE most basic test for XSAVE architecture functionality. This patch tests "FP, SSE(XMM), AVX2(YMM), AVX512_OPMASK/AVX512_ZMM_Hi256/ AVX512_Hi16_ZMM and PKRU parts" xstates with following cases: 1. The contents of these xstates in the process should not change after the signal handling. 2. The contents of these xstates in the child process should be the same as the contents of the xstate in the parent process after the fork syscall. 3. The contents of xstates in the parent process should not change after the context switch. Because xstate like XMM will not be preserved across function calls, fork() and raise() are implemented and inlined. To prevent GCC from generating any FP/SSE(XMM)/AVX/PKRU code, add "-mno-sse -mno-mmx -mno-sse2 -mno-avx -mno-pku" compiler arguments. stdlib.h can not be used because of the "-mno-sse" option. Thanks Dave, Hansen for the above suggestion! Thanks Chen Yu; Shuah Khan; Chatre Reinette and Tony Luck's comments! Thanks to Bae, Chang Seok for a bunch of comments! ======== - Change from v10 to v11 - Remove the small function like cpu_has_pkru(), get_xstate_size() and so on. (Shuah Khan) - Unify xfeature_num type to uint32_t. - Change from v9 to v10 - Remove the small function if the function will be called once and there is no good reason. (Shuah Khan) - Change from v8 to v9 - Use function pointers to make it more structured. (Hansen, Dave) - Improve the function name: xstate_tested -> xstate_in_test. (Chang S. Bae) - Break this test up into two pieces: keep the xstate key test steps with "-mno-sse" and no stdlib.h, keep others in xstate.c file. (Hansen, Dave) - Use kselftest infrastructure for xstate.c file. (Hansen, Dave) - Use instruction back to populate fp xstate buffer. (Hansen, Dave) - Will skip the test if cpu could not support xsave. (Chang S. Bae) - Use __cpuid_count() helper in kselftest.h. (Reinette, Chatre) - Change from v7 to v8 Many thanks to Bae, Chang Seok for a bunch of comments as follow: - Use the filling buffer way to prepare the xstate buffer, and use xrstor instruction way to load the tested xstates. - Remove useless dump_buffer, compare_buffer functions. - Improve the struct of xstate_info. - Added AVX512_ZMM_Hi256 and AVX512_Hi16_ZMM components in xstate test. - Remove redundant xstate_info.xstate_mask, xstate_flag[], and xfeature_test_mask, use xstate_info.mask instead. - Check if xfeature is supported outside of fill_xstate_buf() , this change is easier to read and understand. - Remove useless wrpkru, only use filling all tested xstate buffer in fill_xstates_buf(). - Improve a bunch of function names and variable names. - Improve test steps flow for readability. - Change from v6 to v7: - Added the error number and error description of the reason for the failure, thanks Shuah Khan's suggestion. - Added a description of what these tests are doing in the head comments. - Added changes update in the head comments. - Added description of the purpose of the function. thanks Shuah Khan. - Change from v5 to v6: - In order to prevent GCC from generating any FP code by mistake, "-mno-sse -mno-mmx -mno-sse2 -mno-avx -mno-pku" compiler parameter was added, it's referred to the parameters for compiling the x86 kernel. Thanks Dave Hansen's suggestion. - Removed the use of "kselftest.h", because kselftest.h included <stdlib.h>, and "stdlib.h" would use sse instructions in it's libc, and this *XSAVE* test needed to be compiled without libc sse instructions(-mno-sse). - Improved the description in commit header, thanks Chen Yu's suggestion. - Becasue test code could not use buildin xsave64 in libc without sse, added xsave function by instruction way. - Every key test action would not use libc(like printf) except syscall until it's failed or done. If it's failed, then it would print the failed reason. - Used __cpuid_count() instead of native_cpuid(), becasue __cpuid_count() was a macro definition function with one instruction in libc and did not change xstate. Thanks Chatre Reinette, Shuah Khan. https://lore.kernel.org/linux-sgx/8b7c98f4-f050-bc1c-5699-fa598ecc66a2@linu… - Change from v4 to v5: - Moved code files into tools/testing/selftests/x86. - Delete xsave instruction test, becaue it's not related to kernel. - Improved case description. - Added AVX512 opmask change and related XSAVE content verification. - Added PKRU part xstate test into instruction and signal handling test. - Added XSAVE process swich test for FPU, AVX2, AVX512 opmask and PKRU part. - Change from v3 to v4: - Improve the comment in patch 1. - Change from v2 to v3: - Improve the description of patch 2 git log. - Change from v1 to v2: - Improve the cover-letter. Thanks Dave Hansen's suggestion. Pengfei Xu (2): selftests/x86/xstate: Add xstate signal handling test for XSAVE feature selftests/x86/xstate: Add xstate fork test for XSAVE feature tools/testing/selftests/x86/.gitignore | 1 + tools/testing/selftests/x86/Makefile | 11 +- tools/testing/selftests/x86/xstate.c | 215 +++++++++++++++++ tools/testing/selftests/x86/xstate.h | 228 +++++++++++++++++++ tools/testing/selftests/x86/xstate_helpers.c | 209 +++++++++++++++++ tools/testing/selftests/x86/xstate_helpers.h | 9 + 6 files changed, 671 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/x86/xstate.c create mode 100644 tools/testing/selftests/x86/xstate.h create mode 100644 tools/testing/selftests/x86/xstate_helpers.c create mode 100644 tools/testing/selftests/x86/xstate_helpers.h -- 2.31.1

2 years, 12 months

1
2
0 0

[PATCH net 0/3] Fix bridge_vlan_aware.sh and bridge_vlan_unaware.sh with IFF_UNICAST_FLT

by Vladimir Oltean

Make sure that h1 and h2 don't drop packets with a random MAC DA, which otherwise confuses these selftests. Also, fix an incorrect error message found during those failures. Vladimir Oltean (3): selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLT selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLT selftests: forwarding: fix error message in learning_test tools/testing/selftests/net/forwarding/lib.sh | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) -- 2.25.1

2 years, 12 months

3
7
0 0

[PATCH v1 0/4] arm64/sme: ptrace support for TPIDR2_EL0

by Mark Brown

When SME was initially merged we did not add support for TPIDR2_EL0 to the ptrace interface, creating difficulties for debuggers in accessing lazy save state for ZA. This series implements that support, extending the existing NT_ARM_TLS regset to support the register when available, and adds kselftest coverage for the existing and new NT_ARM_TLS functionality. Existing programs that query the size of the register set will be able to observe the increased size of the register set. Programs that assume the register set is single register will see no change. On systems that do not support SME TPIDR2_EL0 will read as 0 and writes will be ignored, support for SME should be queried via hwcaps as normal. Mark Brown (4): kselftest/arm64: Add test coverage for NT_ARM_TLS arm64/ptrace: Document extension of NT_ARM_TLS to cover TPIDR2_EL0 arm64/ptrace: Support access to TPIDR2_EL0 kselftest/arm64: Add coverage of TPIDR2_EL0 ptrace interface Documentation/arm64/sme.rst | 3 + arch/arm64/kernel/ptrace.c | 25 +- tools/testing/selftests/arm64/abi/.gitignore | 1 + tools/testing/selftests/arm64/abi/Makefile | 2 +- tools/testing/selftests/arm64/abi/ptrace.c | 241 +++++++++++++++++++ 5 files changed, 266 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/arm64/abi/ptrace.c base-commit: a111daf0c53ae91e71fd2bfe7497862d14132e3e -- 2.30.2

2 years, 12 months

1
4
0 0

[PATCH net-next] selftest: net: bridge mdb add/del entry to port that is down

by Casper Andersson

Tests that permanent mdb entries can be added/deleted on ports with state down. Signed-off-by: Casper Andersson <casper.casan(a)gmail.com> --- This feature was implemented recently and a selftest was suggested: https://lore.kernel.org/netdev/20220614063223.zvtrdrh7pbkv3b4v@wse-c0155/ .../testing/selftests/net/forwarding/Makefile | 1 + .../net/forwarding/bridge_mdb_port_down.sh | 118 ++++++++++++++++++ 2 files changed, 119 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 8f481218a492..669ffd6f2a68 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -3,6 +3,7 @@ TEST_PROGS = bridge_igmp.sh \ bridge_locked_port.sh \ bridge_mdb.sh \ + bridge_mdb_port_down.sh \ bridge_mld.sh \ bridge_port_isolation.sh \ bridge_sticky_fdb.sh \ diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh b/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh new file mode 100755 index 000000000000..8c73d21441bf --- /dev/null +++ b/tools/testing/selftests/net/forwarding/bridge_mdb_port_down.sh @@ -0,0 +1,118 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Verify that permanent mdb entries can be added to and deleted from bridge +# interfaces that are down, and works correctly when done so. + +ALL_TESTS="add_del_to_port_down" +NUM_NETIFS=4 + +TEST_GROUP="239.10.10.10" +TEST_GROUP_MAC="01:00:5e:0a:0a:0a" + +source lib.sh + + +add_del_to_port_down() { + RET=0 + + ip link set dev $swp2 down + bridge mdb add dev br0 port "$swp2" grp $TEST_GROUP permanent 2>/dev/null + check_err $? "Failed adding mdb entry" + + ip link set dev $swp2 up + setup_wait_dev $swp2 + mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2 + check_fail $? "Traffic to $TEST_GROUP wasn't forwarded" + + ip link set dev $swp2 down + bridge mdb show dev br0 | grep -q "$TEST_GROUP permanent" 2>/dev/null + check_err $? "MDB entry did not persist after link up/down" + + bridge mdb del dev br0 port "$swp2" grp $TEST_GROUP 2>/dev/null + check_err $? "Failed deleting mdb entry" + + ip link set dev $swp2 up + setup_wait_dev $swp2 + mcast_packet_test $TEST_GROUP_MAC 192.0.2.1 $TEST_GROUP $h1 $h2 + check_err $? "Traffic to $TEST_GROUP was forwarded after entry removed" + + log_test "MDB add/del entry to port with state down " +} + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +switch_create() +{ + # Enable multicast filtering + ip link add dev br0 type bridge mcast_snooping 1 mcast_querier 1 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + + bridge link set dev $swp2 mcast_flood off + # Bridge currently has a "grace time" at creation time before it + # forwards multicast according to the mdb. Since we disable the + # mcast_flood setting per port + sleep 10 +} + +switch_destroy() +{ + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + h2_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +tests_run +exit $EXIT_STATUS -- 2.30.2

2 years, 12 months

3
2
0 0

kselftest/next kselftest-seccomp: 5 runs, 2 regressions (v5.19-rc4-7-gb7ecce6800eb)

by kernelci.org bot

kselftest/next kselftest-seccomp: 5 runs, 2 regressions (v5.19-rc4-7-gb7ecce6800eb) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-7-gb7e… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v5.19-rc4-7-gb7ecce6800eb URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: b7ecce6800eb1aa97c486c1aabf64659193d5a4c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c206014c894b87a2a39bcd Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: clang-14 (Debian clang version 14.0.6-++20220622053050+f28c006a5895-1~exp1~20220622173135.152) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62c206014c894b87a2a39bce new failure (last pass: v5.19-rc1) platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c2045daa2c8e653ea39bcd Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-10 (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62c2045daa2c8e653ea39bce failing since 5 days (last pass: v5.19-rc1, first fail: v5.19-rc4-4-g43fe0cc46b62)

2 years, 12 months

1
0
0 0

kselftest/next kselftest-lib: 9 runs, 1 regressions (v5.19-rc4-7-gb7ecce6800eb)

by kernelci.org bot

kselftest/next kselftest-lib: 9 runs, 1 regressions (v5.19-rc4-7-gb7ecce6800eb) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-7-gb7e… Test: kselftest-lib Tree: kselftest Branch: next Describe: v5.19-rc4-7-gb7ecce6800eb URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: b7ecce6800eb1aa97c486c1aabf64659193d5a4c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c205ed9cf4be2098a39bf6 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: clang-14 (Debian clang version 14.0.6-++20220622053050+f28c006a5895-1~exp1~20220622173135.152) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-lib.login: https://kernelci.org/test/case/id/62c205ed9cf4be2098a39bf7 failing since 27 days (last pass: v5.18-rc3-19-g15477b31db104, first fail: v5.19-rc1)

2 years, 12 months

1
0
0 0

kselftest/next kselftest-cpufreq: 3 runs, 1 regressions (v5.19-rc4-7-gb7ecce6800eb)

by kernelci.org bot

kselftest/next kselftest-cpufreq: 3 runs, 1 regressions (v5.19-rc4-7-gb7ecce6800eb) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-7-gb7e… Test: kselftest-cpufreq Tree: kselftest Branch: next Describe: v5.19-rc4-7-gb7ecce6800eb URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: b7ecce6800eb1aa97c486c1aabf64659193d5a4c Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | clang-14 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62c2058055cebd3c1ba39bee Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: clang-14 (Debian clang version 14.0.6-++20220622053050+f28c006a5895-1~exp1~20220622173135.152) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-7-gb7ecce6800eb/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-cpufreq.login: https://kernelci.org/test/case/id/62c2058055cebd3c1ba39bef failing since 27 days (last pass: v5.18-rc3-19-g15477b31db104, first fail: v5.19-rc1)

2 years, 12 months

1
0
0 0

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-7-gb7ecce6800eb)

by kernelci.org bot

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-7-gb7ecce6800eb) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-7-gb7ecce… Tree: kselftest Branch: next Git Describe: v5.19-rc4-7-gb7ecce6800eb Git Commit: b7ecce6800eb1aa97c486c1aabf64659193d5a4c Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 3 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

2 years, 12 months

1
0
0 0

[PATCH v2] Documentation: KUnit: Fix example with compilation error

by Maíra Canal

The Parameterized Testing example contains a compilation error, as the signature for the description helper function is void(*)(const struct sha1_test_case *, char *), and the struct is non-const. This is warned by Clang: error: initialization of ‘void (*)(struct sha1_test_case *, char *)’ from incompatible pointer type ‘void (*)(const struct sha1_test_case *, char *)’ [-Werror=incompatible-pointer-types] 33 | KUNIT_ARRAY_PARAM(sha1, cases, case_to_desc); | ^~~~~~~~~~~~ ../include/kunit/test.h:1339:70: note: in definition of macro ‘KUNIT_ARRAY_PARAM’ 1339 | void (*__get_desc)(typeof(__next), char *) = get_desc; \ Signed-off-by: Maíra Canal <mairacanal(a)riseup.net> --- v1 -> v2: https://lore.kernel.org/linux-kselftest/CABVgOSkFKJBNt-AsWmOh2Oni4QO2xdiXJi… - Instead of changing the function signature to non-const, makes the cases const (David Gow). --- Documentation/dev-tools/kunit/usage.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index d62a04255c2e..44158eecb51e 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -505,7 +505,7 @@ By reusing the same ``cases`` array from above, we can write the test as a const char *str; const char *sha1; }; - struct sha1_test_case cases[] = { + const struct sha1_test_case cases[] = { { .str = "hello world", .sha1 = "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed", -- 2.36.1

2 years, 12 months

1
0
0 0

[PATCH] Documentation: Kunit: Fix example with compilation error

by Maíra Canal

The Parameterized Testing example contains a compilation error, as the signature for the description helper function should be void(*)(struct sha1_test_case *, char *), so the struct should not be const. This is warned by Clang: error: initialization of ‘void (*)(struct sha1_test_case *, char *)’ from incompatible pointer type ‘void (*)(const struct sha1_test_case *, char *)’ [-Werror=incompatible-pointer-types] 33 | KUNIT_ARRAY_PARAM(sha1, cases, case_to_desc); | ^~~~~~~~~~~~ ../include/kunit/test.h:1339:70: note: in definition of macro ‘KUNIT_ARRAY_PARAM’ 1339 | void (*__get_desc)(typeof(__next), char *) = get_desc; \ Signed-off-by: Maíra Canal <mairacanal(a)riseup.net> --- Documentation/dev-tools/kunit/usage.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst index d62a04255c2e..8e72fb277058 100644 --- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -517,7 +517,7 @@ By reusing the same ``cases`` array from above, we can write the test as a }; // Need a helper function to generate a name for each test case. - static void case_to_desc(const struct sha1_test_case *t, char *desc) + static void case_to_desc(struct sha1_test_case *t, char *desc) { strcpy(desc, t->str); } -- 2.36.1

2 years, 12 months

2
3
0 0

[PATCH v3 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v3 of the conversion of selftests to KUnit. Since the v2, there have been minor fixes. drm_format_test received the biggest change: the KUNIT_EXPECT_FALSE and KUNIT_EXPECT_TRUE macros were changed to KUNIT_EXPECT_EQ, as suggested by Daniel. Most of all, the patches were rebased on top of the recently applied patches for drm_format_helper tests (8f456104915f), in order to avoid conflicts when applying the tests. Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites not longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan). - Add David's Tested-by tags. v2 -> v3: https://lore.kernel.org/dri-devel/20220621200926.257002-1-maira.canal@usp.b… - Rebase it on top of the drm-misc-next with drm_format_helper KUnit tests. - Change KUNIT_EXPECT_FALSE to KUNIT_EXPECT_EQ on drm_format_test (Daniel Latypov). - Add Daniel's Acked-by tag. Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 1 - drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 668 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/Makefile | 4 +- drivers/gpu/drm/tests/drm_buddy_test.c | 748 +++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1078 ++++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 634 +++++++++ .../drm_dp_mst_helper_test.c} | 84 +- drivers/gpu/drm/tests/drm_format_test.c | 284 ++++ .../drm_framebuffer_test.c} | 25 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1135 +++++++--------- .../drm_plane_helper_test.c} | 103 +- .../test-drm_rect.c => tests/drm_rect_test.c} | 124 +- 26 files changed, 3385 insertions(+), 4342 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (73%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (96%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (58%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (62%) rename drivers/gpu/drm/{selftests/test-drm_rect.c => tests/drm_rect_test.c} (53%) -- 2.36.1

2 years, 12 months

2
19
0 0

[PATCH v4 1/4] panic: Taint kernel if tests are run

by David Gow

Most in-kernel tests (such as KUnit tests) are not supposed to run on production systems: they may do deliberately illegal things to trigger errors, and have security implications (for example, KUnit assertions will often deliberately leak kernel addresses). Add a new taint type, TAINT_TEST to signal that a test has been run. This will be printed as 'N' (originally for kuNit, as every other sensible letter was taken.) This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc.) Acked-by: Luis Chamberlain <mcgrof(a)kernel.org> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- Finally getting back to this, with the addition of a MODULE_INFO() to mark a module as a test module. This is automatically set for modules in the "tools/testing" directory by modpost (see patch #2). The 'N' character for the taint is even less useful now that it's no longer short for kuNit, but all the letters in TEST are taken. :-( Changes since v3: https://lore.kernel.org/lkml/20220513083212.3537869-1-davidgow@google.com/ - Remove the mention of KUnit from the documentation. - Add Luis and Brendan's Acked/Reviewed-by tags. Changes since v2: https://lore.kernel.org/linux-kselftest/20220430030019.803481-1-davidgow@go… - Rename TAINT_KUNIT -> TAINT_TEST. - Split into separate patches for adding the taint, and triggering it. - Taint on a kselftest_module being loaded (patch 3/3) Changes since v1: https://lore.kernel.org/linux-kselftest/20220429043913.626647-1-davidgow@go… - Make the taint per-module, to handle the case when tests are in (longer lasting) modules. (Thanks Greg KH). Note that this still has checkpatch.pl warnings around bracket placement, which are intentional as part of matching the surrounding code. --- Documentation/admin-guide/tainted-kernels.rst | 1 + include/linux/panic.h | 3 ++- kernel/panic.c | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index ceeed7b0798d..7d80e8c307d1 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -100,6 +100,7 @@ Bit Log Number Reason that got the kernel tainted 15 _/K 32768 kernel has been live patched 16 _/X 65536 auxiliary taint, defined for and used by distros 17 _/T 131072 kernel was built with the struct randomization plugin + 18 _/N 262144 an in-kernel test has been run === === ====== ======================================================== Note: The character ``_`` is representing a blank in this table to make reading diff --git a/include/linux/panic.h b/include/linux/panic.h index e71161da69c4..c7759b3f2045 100644 --- a/include/linux/panic.h +++ b/include/linux/panic.h @@ -68,7 +68,8 @@ static inline void set_arch_panic_timeout(int timeout, int arch_default_timeout) #define TAINT_LIVEPATCH 15 #define TAINT_AUX 16 #define TAINT_RANDSTRUCT 17 -#define TAINT_FLAGS_COUNT 18 +#define TAINT_TEST 18 +#define TAINT_FLAGS_COUNT 19 #define TAINT_FLAGS_MAX ((1UL << TAINT_FLAGS_COUNT) - 1) struct taint_flag { diff --git a/kernel/panic.c b/kernel/panic.c index a3c758dba15a..6b3369e21026 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -428,6 +428,7 @@ const struct taint_flag taint_flags[TAINT_FLAGS_COUNT] = { [ TAINT_LIVEPATCH ] = { 'K', ' ', true }, [ TAINT_AUX ] = { 'X', ' ', true }, [ TAINT_RANDSTRUCT ] = { 'T', ' ', true }, + [ TAINT_TEST ] = { 'N', ' ', true }, }; /** -- 2.37.0.rc0.161.g10f37bed90-goog

2 years, 12 months

5
13
0 0

[PATCH] selftests:timers: globals don't need initialization

by Zan Aziz

Global variables do not need to be initialized to 0 and checkpatch flags this error in tools/testing/selftests/timers/alarmtimer-suspend.c: ERROR: do not initialise globals to 0 +int final_ret = 0; Fix this checkpatch error. Signed-off-by: Zan Aziz <zanaziz313(a)gmail.com> --- tools/testing/selftests/timers/alarmtimer-suspend.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/timers/alarmtimer-suspend.c b/tools/testing/selftests/timers/alarmtimer-suspend.c index 54da4b088f4c..4332b494103d 100644 --- a/tools/testing/selftests/timers/alarmtimer-suspend.c +++ b/tools/testing/selftests/timers/alarmtimer-suspend.c @@ -92,7 +92,7 @@ long long timespec_sub(struct timespec a, struct timespec b) return ret; } -int final_ret = 0; +int final_ret; void sigalarm(int signo) { -- 2.32.0

2 years, 12 months

1
0
0 0

remove CONFIG_ANDROID

by Christoph Hellwig

Hi Greg, this series removes the CONFIG_ANDROID. It just guards the Kconfig option for binder and then changes a bunch of random defaults and settings, which makes no sense whatsoever and none of those changes had any good justifcation in their commit logs either.

2 years, 12 months

10
45
0 0

[PATCH] net/cmsg_sender: Remove a semicolon

by Li kunyu

Remove the repeated ';' from code. Signed-off-by: Li kunyu <kunyu(a)nfschina.com> --- tools/testing/selftests/net/cmsg_sender.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/cmsg_sender.c b/tools/testing/selftests/net/cmsg_sender.c index bc2162909a1a..75dd83e39207 100644 --- a/tools/testing/selftests/net/cmsg_sender.c +++ b/tools/testing/selftests/net/cmsg_sender.c @@ -456,7 +456,7 @@ int main(int argc, char *argv[]) buf[1] = 0; } else if (opt.sock.type == SOCK_RAW) { struct udphdr hdr = { 1, 2, htons(opt.size), 0 }; - struct sockaddr_in6 *sin6 = (void *)ai->ai_addr;; + struct sockaddr_in6 *sin6 = (void *)ai->ai_addr; memcpy(buf, &hdr, sizeof(hdr)); sin6->sin6_port = htons(opt.sock.proto); -- 2.18.2

3 years

2
1
0 0

[RESEND PATCH] selftests: drivers/dma-buf: Improve message in selftest summary

by Soumya Negi

Selftest udmabuf for the dma-buf driver is skipped when the device file (e.g. /dev/udmabuf) for the DMA buffer cannot be opened i.e. no DMA buffer has been allocated. This patch adds clarity to the SKIP message. Signed-off-by: Soumya Negi <soumya.negi97(a)gmail.com> --- tools/testing/selftests/drivers/dma-buf/udmabuf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c index de1c4e6de0b2..c812080e304e 100644 --- a/tools/testing/selftests/drivers/dma-buf/udmabuf.c +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -32,7 +32,8 @@ int main(int argc, char *argv[]) devfd = open("/dev/udmabuf", O_RDWR); if (devfd < 0) { - printf("%s: [skip,no-udmabuf]\n", TEST_PREFIX); + printf("%s: [skip,no-udmabuf: Unable to access DMA buffer device file]\n", + TEST_PREFIX); exit(77); } -- 2.17.1

3 years

1
0
0 0

[PATCH net-next v3] selftests: net: fib_rule_tests: fix support for running individual tests

by Alaa Mohamed

parsing and usage of -t got missed in the previous patch. this patch fixes it Fixes: 816cda9ae531 ("selftests: net: fib_rule_tests: add support to select a test to run") Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am(a)gmail.com> --- changes in v2: edit commit subject and message. --- changes in v3: add Fixes tag --- tools/testing/selftests/net/fib_rule_tests.sh | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/tools/testing/selftests/net/fib_rule_tests.sh b/tools/testing/selftests/net/fib_rule_tests.sh index bbe3b379927a..c245476fa29d 100755 --- a/tools/testing/selftests/net/fib_rule_tests.sh +++ b/tools/testing/selftests/net/fib_rule_tests.sh @@ -303,6 +303,29 @@ run_fibrule_tests() log_section "IPv6 fib rule" fib_rule6_test } +################################################################################ +# usage + +usage() +{ + cat <<EOF +usage: ${0##*/} OPTS + + -t <test> Test(s) to run (default: all) + (options: $TESTS) +EOF +} + +################################################################################ +# main + +while getopts ":t:h" opt; do + case $opt in + t) TESTS=$OPTARG;; + h) usage; exit 0;; + *) usage; exit 1;; + esac +done if [ "$(id -u)" -ne 0 ];then echo "SKIP: Need root privileges" -- 2.25.1

3 years

2
1
0 0

Re: [PATCH v1] kbuild: fix sub directory output build of kselftests

by Shuah Khan

On 6/27/22 11:45 AM, Masahiro Yamada wrote: > On Tue, Jun 28, 2022 at 1:54 AM Shuah Khan <skhan(a)linuxfoundation.org> wrote: >> >> On 6/27/22 1:02 AM, Muhammad Usama Anjum wrote: >>> Build of kselftests fail if kernel's top most Makefile is used for >>> running or building kselftests with separate output directory which is >>> sub-directory. srctree is set to .. erroneously. >>> >>> make kselftest-all O=/linux_mainline/build >>> Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory >>> >>> make kselftest-all O=build >>> Makefile:1080: ../scripts/Makefile.extrawarn: No such file or directory >>> >>> Fix this by comparing abs_srctree with CURDIR instead of abs_objtree. >>> CURDIR changes based on from where the command has been run and it sets >>> the srctree correctly. >>> >>> Fixes: 25b146c5b8cee("kbuild: allow Kbuild to start from any directory") >>> Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> >>> --- >>> Changes in V2: >>> - Correct the bugfix instead of workaround >>> >>> V1: https://lore.kernel.org/lkml/20220223191016.1658728-1-usama.anjum@collabora… >>> --- >>> Makefile | 4 ++-- >>> 1 file changed, 2 insertions(+), 2 deletions(-) >>> >>> diff --git a/Makefile b/Makefile >>> index e66358b64ede..4090d7afcda4 100644 >>> --- a/Makefile >>> +++ b/Makefile >>> @@ -238,12 +238,12 @@ ifeq ($(need-sub-make),) >>> # so that IDEs/editors are able to understand relative filenames. >>> MAKEFLAGS += --no-print-directory >>> >>> -ifeq ($(abs_srctree),$(abs_objtree)) >>> +ifeq ($(abs_srctree),$(CURDIR)) >>> # building in the source tree >>> srctree := . >>> building_out_of_srctree := >>> else >>> - ifeq ($(abs_srctree)/,$(dir $(abs_objtree))) >>> + ifeq ($(abs_srctree)/,$(dir $(CURDIR))) >>> # building in a subdirectory of the source tree >>> srctree := .. >>> else >>> >> >> Please resend cc'ing linux-kselftest >> >> thanks, >> -- Shuah > > > Please do not send this any more. > This part is good as is. > + linux-kselftest(a)vger.kernel.org The reason I suggested resending cc'ing linux-kselftest is because this fixes a kselftest problem. I am assuming this patch will go through kbuild Acked-by: Shuah Khan <skhan(a)linuxfoundation.org> thanks, -- Shuah

3 years

3
2
0 0

[PATCH v11 0/8] cgroup/cpuset: cpu partition code enhancements

by Waiman Long

v11: - Fix incorrect spacing in patch 7 and include documentation suggestions by Michal. - Move partition_is_populated() check to the last one in list of conditions to be checked. v10: - Relax constraints for changes made to "cpuset.cpus" and "cpuset.cpus.partition" as suggested. Now almost all changes are allowed. - Add patch 1 to signal that we may need to do additional work in the future to relax the constraint that tasks' cpumask may need some adjustment if child partitions are present. - Add patch 2 for miscellaneous cleanups. This patchset include the following enhancements to the cpuset v2 partition code. 1) Allow partitions that have no task to have empty effective cpus. 2) Relax the constraints on what changes are allowed in cpuset.cpus and cpuset.cpus.partition. However, the partition remain invalid until the constraints of a valid partition root is satisfied. 3) Add a new "isolated" partition type for partitions with no load balancing which is available in v1 but not yet in v2. 4) Allow the reading of cpuset.cpus.partition to include a reason string as to why the partition remain invalid. In addition, the cgroup-v2.rst documentation file is updated and a self test is added to verify the correctness the partition code. The code diff from v10 is listed below. Waiman Long (8): cgroup/cpuset: Add top_cpuset check in update_tasks_cpumask() cgroup/cpuset: Miscellaneous cleanups & add helper functions cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective cgroup/cpuset: Relax constraints to partition & cpus changes cgroup/cpuset: Add a new isolated cpus.partition type cgroup/cpuset: Show invalid partition reason string cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst kselftest/cgroup: Add cpuset v2 partition root state test Documentation/admin-guide/cgroup-v2.rst | 149 ++-- kernel/cgroup/cpuset.c | 718 +++++++++++------- tools/testing/selftests/cgroup/Makefile | 5 +- .../selftests/cgroup/test_cpuset_prs.sh | 674 ++++++++++++++++ tools/testing/selftests/cgroup/wait_inotify.c | 87 +++ 5 files changed, 1304 insertions(+), 329 deletions(-) create mode 100755 tools/testing/selftests/cgroup/test_cpuset_prs.sh create mode 100644 tools/testing/selftests/cgroup/wait_inotify.c -- diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 94e1e3771830..9184a09e0fc9 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -2130,10 +2130,10 @@ Cpuset Interface Files CPUs should be carefully distributed and bound to each of the individual CPUs for optimal performance. - The value shown in "cpuset.cpus.effective" of a partition root is - the CPUs that the parent partition root can dedicate to the new - partition root. They are subtracted from "cpuset.cpus.effective" - of the parent and may be different from "cpuset.cpus" + The value shown in "cpuset.cpus.effective" of a partition root + is the CPUs that the partition root can dedicate to a potential + new child partition root. The new child subtracts available + CPUs from its parent "cpuset.cpus.effective". A partition root ("root" or "isolated") can be in one of the two possible states - valid or invalid. An invalid partition @@ -2165,24 +2165,28 @@ Cpuset Interface Files 2) The parent cgroup is a valid partition root. 3) The "cpuset.cpus" is not empty and must contain at least one of the CPUs from parent's "cpuset.cpus", i.e. they overlap. - 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus" - and cannot be empty unless there is no task associated with - this partition. + 4) The "cpuset.cpus.effective" must be a subset of "cpuset.cpus" + and cannot be empty unless there is no task associated with + this partition. External events like hotplug or changes to "cpuset.cpus" can cause a valid partition root to become invalid and vice versa. Note that a task cannot be moved to a cgroup with empty "cpuset.cpus.effective". - For a valid partition root or an invalid partition root with - the exclusivity rule enabled, changes made to "cpuset.cpus" - that violate the exclusivity rule will not be allowed. + For a valid partition root or an invalid partition root with + the exclusivity rule enabled, changes made to "cpuset.cpus" + that violate the exclusivity rule will not be allowed. A valid non-root parent partition may distribute out all its CPUs to its child partitions when there is no task associated with it. - Care must be taken to change a valid partition root to "member" - as all its child partitions, if present, will become invalid. + Care must be taken to change a valid partition root to + "member" as all its child partitions, if present, will become + invalid causing disruption to tasks running in those child + partitions. These inactivated partitions could be recovered if + their parent is switched back to a partition root with a proper + set of "cpuset.cpus". Poll and inotify events are triggered whenever the state of "cpuset.cpus.partition" changes. That includes changes caused diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index 90ee0e4d8d7e..261974f5bb3c 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -1283,9 +1283,12 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, * invalid to valid violates the exclusivity rule. * * The partcmd_enable and partcmd_disable commands are used by - * update_prstate(). The partcmd_update command is used by - * update_cpumasks_hier() with newmask NULL and update_cpumask() with - * newmask set. + * update_prstate(). An error code may be returned and the caller will check + * for error. + * + * The partcmd_update command is used by update_cpumasks_hier() with newmask + * NULL and update_cpumask() with newmask set. The callers won't check for + * error and so partition_root_state and prs_error will be updated directly. */ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, struct cpumask *newmask, @@ -1326,8 +1329,8 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, * A parent can be left with no CPU as long as there is no * task directly associated with the parent partition. */ - if (partition_is_populated(parent, cs) && - !cpumask_intersects(cs->cpus_allowed, parent->effective_cpus)) + if (!cpumask_intersects(cs->cpus_allowed, parent->effective_cpus) && + partition_is_populated(parent, cs)) return PERR_NOCPUS; cpumask_copy(tmp->addmask, cs->cpus_allowed); @@ -1361,9 +1364,10 @@ static int update_parent_subparts_cpumask(struct cpuset *cs, int cmd, * Make partition invalid if parent's effective_cpus could * become empty and there are tasks in the parent. */ - if (adding && partition_is_populated(parent, cs) && + if (adding && cpumask_subset(parent->effective_cpus, tmp->addmask) && - !cpumask_intersects(tmp->delmask, cpu_active_mask)) { + !cpumask_intersects(tmp->delmask, cpu_active_mask) && + partition_is_populated(parent, cs)) { part_error = PERR_NOCPUS; adding = false; deleting = cpumask_and(tmp->delmask, cs->cpus_allowed, @@ -1749,13 +1753,13 @@ static int update_cpumask(struct cpuset *cs, struct cpuset *trialcs, /* * Make sure that subparts_cpus, if not empty, is a subset of - * cpus_allowed. Clear subparts_cpus if there is an error or + * cpus_allowed. Clear subparts_cpus if partition not valid or * empty effective cpus with tasks. */ if (cs->nr_subparts_cpus) { - if (cs->prs_err || - (partition_is_populated(cs, NULL) && - cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus))) { + if (!is_partition_valid(cs) || + (cpumask_subset(trialcs->effective_cpus, cs->subparts_cpus) && + partition_is_populated(cs, NULL))) { cs->nr_subparts_cpus = 0; cpumask_clear(cs->subparts_cpus); } else {

3 years

5
35
0 0

Re: [PATCH net-next v1 1/1] net: bridge: ensure that link-local traffic cannot unlock a locked port

by Nikolay Aleksandrov

On 30/06/2022 14:16, Hans Schultz wrote: > This patch is related to the patch set > "Add support for locked bridge ports (for 802.1X)" > Link: https://lore.kernel.org/netdev/20220223101650.1212814-1-schultz.hans+netdev… > > This patch makes the locked port feature work with learning turned on, > which is enabled with the command: > > bridge link set dev DEV learning on > > Without this patch, link local traffic (01:80:c2) like EAPOL packets will > create a fdb entry when ingressing on a locked port with learning turned > on, thus unintentionally opening up the port for traffic for the said MAC. > > Some switchcore features like Mac-Auth and refreshing of FDB entries, > require learning enables on some switchcores, f.ex. the mv88e6xxx family. > Other features may apply too. > > Since many switchcores trap or mirror various multicast packets to the > CPU, link local traffic will unintentionally unlock the port for the > SA mac in question unless prevented by this patch. > > Signed-off-by: Hans Schultz <hans(a)kapio-technology.com> > --- > net/bridge/br_input.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c > index 68b3e850bcb9..a3ce0a151817 100644 > --- a/net/bridge/br_input.c > +++ b/net/bridge/br_input.c > @@ -215,6 +215,7 @@ static void __br_handle_local_finish(struct sk_buff *skb) > if ((p->flags & BR_LEARNING) && > nbp_state_should_learn(p) && > !br_opt_get(p->br, BROPT_NO_LL_LEARN) && > + !(p->flags & BR_PORT_LOCKED) && > br_should_learn(p, skb, &vid)) > br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, 0); > } LGTM, thanks! Acked-by: Nikolay Aleksandrov <razor(a)blackwall.org>

3 years

1
0
0 0

Re: [PATCH net-next v1 1/1] net: bridge: ensure that multicast packets cannot unlock a locked port

by Nikolay Aleksandrov

On 30/06/2022 13:05, Hans Schultz wrote: > This makes it possible to use the locked port feature with learning > turned on which is needed for various driver features. > > Signed-off-by: Hans Schultz <hans(a)kapio-technology.com> > --- > net/bridge/br_input.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c > index 68b3e850bcb9..a3ce0a151817 100644 > --- a/net/bridge/br_input.c > +++ b/net/bridge/br_input.c > @@ -215,6 +215,7 @@ static void __br_handle_local_finish(struct sk_buff *skb) > if ((p->flags & BR_LEARNING) && > nbp_state_should_learn(p) && > !br_opt_get(p->br, BROPT_NO_LL_LEARN) && > + !(p->flags & BR_PORT_LOCKED) && > br_should_learn(p, skb, &vid)) > br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, 0); > } hmm this is called for link-local traffic (01:80:c2), the title is misleading please include the real traffic type because it doesn't concern mcast Also please include the long explanation from the 0 patch in this one and drop the cover letter, it's good to have the info. Thanks, Nik

3 years

1
0
0 0

[PATCH] selftests net: fix kselftest net fatal error

by Coleman Dietsch

The incorrect path is causing the following error when trying to run net kselftests: In file included from bpf/nat6to4.c:43: ../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found ^~~~~~~~~~~~~~~~~~~ 1 error generated. Signed-off-by: Coleman Dietsch <dietschc(a)csp.edu> --- tools/testing/selftests/net/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile index 8a69c91fcca0..8ccaf8732eb2 100644 --- a/tools/testing/selftests/net/bpf/Makefile +++ b/tools/testing/selftests/net/bpf/Makefile @@ -2,7 +2,7 @@ CLANG ?= clang CCINCLUDE += -I../../bpf -CCINCLUDE += -I../../../lib +CCINCLUDE += -I../../../../lib CCINCLUDE += -I../../../../../usr/include/ TEST_CUSTOM_PROGS = $(OUTPUT)/bpf/nat6to4.o -- 2.34.1

3 years

2
1
0 0

[PATCH] tools: Strong conversion of void type pointer could be removed

by Li kunyu

The void pointer argument does not require a cast assignment because it is the address passed. Signed-off-by: Li kunyu <kunyu(a)nfschina.com> --- tools/testing/selftests/x86/fsgsbase.c | 2 +- tools/testing/selftests/x86/test_vsyscall.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/x86/fsgsbase.c b/tools/testing/selftests/x86/fsgsbase.c index 8c780cce941d..5d99261317e1 100644 --- a/tools/testing/selftests/x86/fsgsbase.c +++ b/tools/testing/selftests/x86/fsgsbase.c @@ -63,7 +63,7 @@ static void clearhandler(int sig) static void sigsegv(int sig, siginfo_t *si, void *ctx_void) { - ucontext_t *ctx = (ucontext_t*)ctx_void; + ucontext_t *ctx = ctx_void; if (!want_segv) { clearhandler(SIGSEGV); diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 5b45e6986aea..2416941a0952 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -184,7 +184,7 @@ static volatile unsigned long segv_err; static void sigsegv(int sig, siginfo_t *info, void *ctx_void) { - ucontext_t *ctx = (ucontext_t *)ctx_void; + ucontext_t *ctx = ctx_void; segv_err = ctx->uc_mcontext.gregs[REG_ERR]; siglongjmp(jmpbuf, 1); -- 2.18.2

3 years

2
3
0 0

[PATCH net 2/2] selftest: tun: add test for NAPI dismantle

by Jakub Kicinski

Being lazy does not pay, add the test for various ordering of tun queue close / detach / destroy. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/tun.c | 162 +++++++++++++++++++++++++++ 2 files changed, 163 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/net/tun.c diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 7ea54af55490..ddad703ace34 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -54,7 +54,7 @@ TEST_GEN_FILES += ipsec TEST_GEN_FILES += ioam6_parser TEST_GEN_FILES += gro TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa -TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls +TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun TEST_GEN_FILES += toeplitz TEST_GEN_FILES += cmsg_sender TEST_GEN_FILES += stress_reuseport_listen diff --git a/tools/testing/selftests/net/tun.c b/tools/testing/selftests/net/tun.c new file mode 100644 index 000000000000..fa83918b62d1 --- /dev/null +++ b/tools/testing/selftests/net/tun.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE + +#include <errno.h> +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <linux/if.h> +#include <linux/if_tun.h> +#include <linux/netlink.h> +#include <linux/rtnetlink.h> +#include <sys/ioctl.h> +#include <sys/socket.h> + +#include "../kselftest_harness.h" + +static int tun_attach(int fd, char *dev) +{ + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_ATTACH_QUEUE; + + return ioctl(fd, TUNSETQUEUE, (void *) &ifr); +} + +static int tun_detach(int fd, char *dev) +{ + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_DETACH_QUEUE; + + return ioctl(fd, TUNSETQUEUE, (void *) &ifr); +} + +static int tun_alloc(char *dev) +{ + struct ifreq ifr; + int fd, err; + + fd = open("/dev/net/tun", O_RDWR); + if (fd < 0) { + fprintf(stderr, "can't open tun: %s\n", strerror(errno)); + return fd; + } + + memset(&ifr, 0, sizeof(ifr)); + strcpy(ifr.ifr_name, dev); + ifr.ifr_flags = IFF_TAP | IFF_NAPI | IFF_MULTI_QUEUE; + + err = ioctl(fd, TUNSETIFF, (void *) &ifr); + if (err < 0) { + fprintf(stderr, "can't TUNSETIFF: %s\n", strerror(errno)); + close(fd); + return err; + } + strcpy(dev, ifr.ifr_name); + return fd; +} + +static int tun_delete(char *dev) +{ + struct { + struct nlmsghdr nh; + struct ifinfomsg ifm; + unsigned char data[64]; + } req; + struct rtattr *rta; + int ret, rtnl; + + rtnl = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_ROUTE); + if (rtnl < 0) { + fprintf(stderr, "can't open rtnl: %s\n", strerror(errno)); + return 1; + } + + memset(&req, 0, sizeof(req)); + req.nh.nlmsg_len = NLMSG_ALIGN(NLMSG_LENGTH(sizeof(req.ifm))); + req.nh.nlmsg_flags = NLM_F_REQUEST; + req.nh.nlmsg_type = RTM_DELLINK; + + req.ifm.ifi_family = AF_UNSPEC; + + rta = (struct rtattr *)(((char *)&req) + NLMSG_ALIGN(req.nh.nlmsg_len)); + rta->rta_type = IFLA_IFNAME; + rta->rta_len = RTA_LENGTH(IFNAMSIZ); + req.nh.nlmsg_len += rta->rta_len; + memcpy(RTA_DATA(rta), dev, IFNAMSIZ); + + ret = send(rtnl, &req, req.nh.nlmsg_len, 0); + if (ret < 0) + fprintf(stderr, "can't send: %s\n", strerror(errno)); + ret = (unsigned int)ret != req.nh.nlmsg_len; + + close(rtnl); + return ret; +} + +FIXTURE(tun) +{ + char ifname[IFNAMSIZ]; + int fd, fd2; +}; + +FIXTURE_SETUP(tun) +{ + memset(self->ifname, 0, sizeof(self->ifname)); + + self->fd = tun_alloc(self->ifname); + ASSERT_GE(self->fd, 0); + + self->fd2 = tun_alloc(self->ifname); + ASSERT_GE(self->fd2, 0); +} + +FIXTURE_TEARDOWN(tun) +{ + if (self->fd >= 0) + close(self->fd); + if (self->fd2 >= 0) + close(self->fd2); +} + +TEST_F(tun, delete_detach_close) { + EXPECT_EQ(tun_delete(self->ifname), 0); + EXPECT_EQ(tun_detach(self->fd, self->ifname), -1); + EXPECT_EQ(errno, 22); +} + +TEST_F(tun, detach_delete_close) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, detach_close_delete) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + close(self->fd); + self->fd = -1; + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, reattach_delete_close) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_attach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_F(tun, reattach_close_delete) { + EXPECT_EQ(tun_detach(self->fd, self->ifname), 0); + EXPECT_EQ(tun_attach(self->fd, self->ifname), 0); + close(self->fd); + self->fd = -1; + EXPECT_EQ(tun_delete(self->ifname), 0); +} + +TEST_HARNESS_MAIN -- 2.36.1

3 years

1
0
0 0

[PATCH net-next] selftests: forwarding: ethtool_extended_state: Convert to busywait

by Petr Machata

Currently, this script sets up the test scenario, which is supposed to end in an inability of the system to negotiate a link. It then waits for a bit, and verifies that the system can diagnose why the link was not established. The wait time for the scenario where different link speeds are forced on the two ends of a loopback cable, was set to 4 seconds, which exactly covered it. As of a recent mlxsw firmware update, this time gets longer, and this test starts failing. The time that selftests currently wait for links to be established is currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is the time necessary to establish and bring up a link, it should also be enough to determine that a link cannot be established and why. Therefore in this patch, convert the sleeps to busywaits, so that if a failure is established sooner (as is expected), the test runs quicker. And use $WAIT_TIMEOUT as the time to wait. Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> --- .../net/forwarding/ethtool_extended_state.sh | 43 ++++++++++++------- 1 file changed, 28 insertions(+), 15 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh index 4b42dfd4efd1..072faa77f53b 100755 --- a/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh +++ b/tools/testing/selftests/net/forwarding/ethtool_extended_state.sh @@ -11,6 +11,8 @@ NUM_NETIFS=2 source lib.sh source ethtool_lib.sh +TIMEOUT=$((WAIT_TIMEOUT * 1000)) # ms + setup_prepare() { swp1=${NETIFS[p1]} @@ -18,7 +20,7 @@ setup_prepare() swp3=$NETIF_NO_CABLE } -ethtool_extended_state_check() +ethtool_ext_state() { local dev=$1; shift local expected_ext_state=$1; shift @@ -30,21 +32,27 @@ ethtool_extended_state_check() | sed -e 's/^[[:space:]]*//') ext_state=$(echo $ext_state | cut -d "," -f1) - [[ $ext_state == $expected_ext_state ]] - check_err $? "Expected \"$expected_ext_state\", got \"$ext_state\"" - - [[ $ext_substate == $expected_ext_substate ]] - check_err $? "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + if [[ $ext_state != $expected_ext_state ]]; then + echo "Expected \"$expected_ext_state\", got \"$ext_state\"" + return 1 + fi + if [[ $ext_substate != $expected_ext_substate ]]; then + echo "Expected \"$expected_ext_substate\", got \"$ext_substate\"" + return 1 + fi } autoneg() { + local msg + RET=0 ip link set dev $swp1 up - sleep 4 - ethtool_extended_state_check $swp1 "Autoneg" "No partner detected" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected") + check_err $? "$msg" log_test "Autoneg, No partner detected" @@ -53,6 +61,8 @@ autoneg() autoneg_force_mode() { + local msg + RET=0 ip link set dev $swp1 up @@ -65,12 +75,13 @@ autoneg_force_mode() ethtool_set $swp1 speed $speed1 autoneg off ethtool_set $swp2 speed $speed2 autoneg off - sleep 4 - ethtool_extended_state_check $swp1 "Autoneg" \ - "No partner detected during force mode" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp1 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" - ethtool_extended_state_check $swp2 "Autoneg" \ - "No partner detected during force mode" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp2 \ + "Autoneg" "No partner detected during force mode") + check_err $? "$msg" log_test "Autoneg, No partner detected during force mode" @@ -83,12 +94,14 @@ autoneg_force_mode() no_cable() { + local msg + RET=0 ip link set dev $swp3 up - sleep 1 - ethtool_extended_state_check $swp3 "No cable" + msg=$(busywait $TIMEOUT ethtool_ext_state $swp3 "No cable") + check_err $? "$msg" log_test "No cable" -- 2.35.3

3 years

2
1
0 0

[net-next v3 0/4] seg6: add support for SRv6 Headend Reduced Encapsulation

by Andrea Mayer

This patchset adds support for SRv6 Headend behavior with Reduced Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1]. In details, the patchset is made of: - patch 1/4: add support for SRv6 H.Encaps.Red behavior; - Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior; - patch 2/4: add selftest for SRv6 H.Encaps.Red behavior; - patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior. The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and H.L2Encaps.Red behaviors is provided in a separated patchset. [1] - https://datatracker.ietf.org/doc/html/rfc8986 v2 -> v3: - Keep SRH when HMAC TLV is present; - Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two patches (respectively, patch 1/4 and patch 2/4); - Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red. v1 -> v2: - Fixed sparse warnings; - memset now uses sizeof() instead of hardcoded value; - Removed EXPORT_SYMBOL_GPL. Andrea Mayer (4): seg6: add support for SRv6 H.Encaps.Red behavior seg6: add support for SRv6 H.L2Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.Encaps.Red behavior selftests: seg6: add selftest for SRv6 H.L2Encaps.Red behavior include/uapi/linux/seg6_iptunnel.h | 2 + net/ipv6/seg6_iptunnel.c | 138 +++- .../net/srv6_hencap_red_l3vpn_test.sh | 742 ++++++++++++++++++ .../net/srv6_hl2encap_red_l2vpn_test.sh | 674 ++++++++++++++++ 4 files changed, 1554 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/net/srv6_hencap_red_l3vpn_test.sh create mode 100755 tools/testing/selftests/net/srv6_hl2encap_red_l2vpn_test.sh -- 2.20.1

3 years

2
6
0 0

[PATCH v2] selftests/tpm2: increase timeout for kselftests

by Stefan Mahnke-Hartmann

From: Johannes Holland <johannes.holland(a)infineon.com> Due to CreatePrimary commands which need to create RSA keys of increasing size, the timeout value need to be raised, as well. Default is 45s. Signed-off-by: Johannes Holland <johannes.holland(a)infineon.com> Signed-off-by: Stefan Mahnke-Hartmann <stefan.mahnke-hartmann(a)infineon.com> --- Changelog: * v2: * Add maintainter to recipients * Change subject tools/testing/selftests/tpm2/settings | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 tools/testing/selftests/tpm2/settings diff --git a/tools/testing/selftests/tpm2/settings b/tools/testing/selftests/tpm2/settings new file mode 100644 index 000000000000..919bc3803f03 --- /dev/null +++ b/tools/testing/selftests/tpm2/settings @@ -0,0 +1,2 @@ +timeout=600 + -- 2.25.1

3 years

2
1
0 0

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-6-g8587f3732b37)

by kernelci.org bot

kselftest/next build: 5 builds: 0 failed, 5 passed (v5.19-rc4-6-g8587f3732b37) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-6-g8587f3… Tree: kselftest Branch: next Git Describe: v5.19-rc4-6-g8587f3732b37 Git Commit: 8587f3732b37a39de205d8c42f5448dbe6aa6b55 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 3 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years

1
0
0 0

[PATCH MANUALSEL 5.4] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index 6cd91970fbad..3b2a426070c4 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

3 years

1
0
0 0

[PATCH MANUALSEL 5.10 2/2] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index 2f37b90ee1a9..f600311fdc6a 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

3 years

1
0
0 0

[PATCH MANUALSEL 5.15 2/3] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index e0b0164e9af8..be1d9728c4ce 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

3 years

1
0
0 0

[PATCH MANUALSEL 5.18 2/3] selftests: KVM: Handle compiler optimizations in ucall

by Sasha Levin

From: Raghavendra Rao Ananta <rananta(a)google.com> [ Upstream commit 9e2f6498efbbc880d7caa7935839e682b64fe5a6 ] The selftests, when built with newer versions of clang, is found to have over optimized guests' ucall() function, and eliminating the stores for uc.cmd (perhaps due to no immediate readers). This resulted in the userspace side always reading a value of '0', and causing multiple test failures. As a result, prevent the compiler from optimizing the stores in ucall() with WRITE_ONCE(). Suggested-by: Ricardo Koller <ricarkol(a)google.com> Suggested-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Raghavendra Rao Ananta <rananta(a)google.com> Message-Id: <20220615185706.1099208-1-rananta(a)google.com> Reviewed-by: Andrew Jones <drjones(a)redhat.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kvm/lib/aarch64/ucall.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/aarch64/ucall.c b/tools/testing/selftests/kvm/lib/aarch64/ucall.c index e0b0164e9af8..be1d9728c4ce 100644 --- a/tools/testing/selftests/kvm/lib/aarch64/ucall.c +++ b/tools/testing/selftests/kvm/lib/aarch64/ucall.c @@ -73,20 +73,19 @@ void ucall_uninit(struct kvm_vm *vm) void ucall(uint64_t cmd, int nargs, ...) { - struct ucall uc = { - .cmd = cmd, - }; + struct ucall uc = {}; va_list va; int i; + WRITE_ONCE(uc.cmd, cmd); nargs = nargs <= UCALL_MAX_ARGS ? nargs : UCALL_MAX_ARGS; va_start(va, nargs); for (i = 0; i < nargs; ++i) - uc.args[i] = va_arg(va, uint64_t); + WRITE_ONCE(uc.args[i], va_arg(va, uint64_t)); va_end(va); - *ucall_exit_mmio_addr = (vm_vaddr_t)&uc; + WRITE_ONCE(*ucall_exit_mmio_addr, (vm_vaddr_t)&uc); } uint64_t get_ucall(struct kvm_vm *vm, uint32_t vcpu_id, struct ucall *uc) -- 2.35.1

3 years

1
0
0 0

[PATCH v14 3/4] selftests/ftrace: Add testcases for objtrace

by Jeff Xie

Add a series of testcases to illustrate correct and incorrect usage of objtrace trigger. Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Jeff Xie <xiehuan09(a)gmail.com> Tested-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> --- .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc new file mode 100644 index 000000000000..d894442b6a30 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc @@ -0,0 +1,41 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: event trigger - test objtrace-trigger +# requires: kprobe_events "objtrace":README + +fail() { #msg + echo $1 + exit_fail +} + +echo 'p bio_add_page arg1=$arg1 arg2=$arg2' > kprobe_events + +FEATURE=`grep objtrace events/kprobes/p_bio_add_page_0/trigger` +if [ -z "$FEATURE" ]; then + echo "objtrace trigger is not supported" + exit_unsupported +fi + +echo "Test objtrace trigger" +echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > \ + events/kprobes/p_bio_add_page_0/trigger +if [ -z $? ]; then + fail "objtrace trigger syntax error" +fi + +echo "Test objtrace semantic errors" + +# Being lack of objtrace command +! echo 'objtrace:arg1,0x28:u32:1' > events/kprobes/p_bio_add_page_0/trigger +# Bad parameter name +! echo 'objtrace:add:argx:u32:1' > events/kprobes/p_bio_add_page_0/trigger +# The parameter existed on event +! echo 'objtrace:add:arg2:u32:1' > events/kprobes/p_bio_add_page_0/trigger + +echo "reset objtrace trigger" + +echo '!objtrace:add:arg1,0x28:u32' > \ + events/kprobes/p_bio_add_page_0/trigger +echo '-:p_bio_add_page_0' >> ./kprobe_events + +exit 0 -- 2.25.1

3 years

1
0
0 0

[PATCH] Documentation: kunit: eliminate code-block warnings

by Randy Dunlap

Fix Sphinx complaints about code-block directive missing an argument. For start.rst, add "none" since that is already heavily used in that file. For run_wrapper.rst, use the simpler "::" literal block instead. dev-tools/kunit/start.rst:83: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:17: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:23: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:31: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:51: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:57: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:78: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:85: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:109: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:116: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:124: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:139: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. dev-tools/kunit/run_wrapper.rst:162: WARNING: Error in "code-block" directive: 1 argument(s) required, 0 supplied. Fixes: c48b9ef1f794 ("Documentation: KUnit: Rewrite getting started") Fixes: 46201d47d6c4 ("Documentation: kunit: Reorganize documentation related to running tests") Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Brendan Higgins <brendanhiggins(a)google.com> Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: Jonathan Corbet <corbet(a)lwn.net> Cc: linux-doc(a)vger.kernel.org Cc: Harinder Singh <sharinder(a)google.com> Cc: Tim Bird <tim.bird(a)sony.com> --- Documentation/dev-tools/kunit/run_wrapper.rst | 24 ++++++++-------- Documentation/dev-tools/kunit/start.rst | 2 - 2 files changed, 13 insertions(+), 13 deletions(-) --- linux-next-20220331.orig/Documentation/dev-tools/kunit/run_wrapper.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/run_wrapper.rst @@ -14,13 +14,13 @@ tests, and formats the test results. Run command: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run We should see the following: -.. code-block:: +:: Generating .config... Building KUnit kernel... @@ -28,7 +28,7 @@ We should see the following: We may want to use the following options: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all @@ -48,13 +48,13 @@ test configs for certain subsystems. To use a different ``.kunitconfig`` file (such as one provided to test a particular subsystem), pass it as an option: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig To view kunit_tool flags (optional command-line arguments), run: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --help @@ -75,14 +75,14 @@ certain code blocks, arch configs and so To create a ``.kunitconfig``, using the KUnit ``defconfig``: -.. code-block:: +:: cd $PATH_TO_LINUX_REPO cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig We can then add any other Kconfig options. For example: -.. code-block:: +:: CONFIG_LIST_KUNIT_TEST=y @@ -106,14 +106,14 @@ can run part of the KUnit build process When running kunit_tool, from a ``.kunitconfig``, we can generate a ``.config`` by using the ``config`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py config To build a KUnit kernel from the current ``.config``, we can use the ``build`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py build @@ -121,7 +121,7 @@ If we already have built UML kernel with can run the kernel, and display the test results with the ``exec`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py exec @@ -136,7 +136,7 @@ format. When running tests, kunit_tool p a summary. To see the raw test results in TAP format, we can pass the ``--raw_output`` argument: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run --raw_output @@ -159,7 +159,7 @@ By passing a bash style glob filter to t commands, we can run a subset of the tests built into a kernel . For example: if we only want to run KUnit resource tests, use: -.. code-block:: +:: ./tools/testing/kunit/kunit.py run 'kunit-resource*' --- linux-next-20220331.orig/Documentation/dev-tools/kunit/start.rst +++ linux-next-20220331/Documentation/dev-tools/kunit/start.rst @@ -80,7 +80,7 @@ Running Tests (KUnit Wrapper) If everything worked correctly, you should see the following: -.. code-block:: +.. code-block:: none Generating .config ... Building KUnit Kernel ...

3 years

4
7
0 0

THIS IS VERY CONFIDENTIAL

by Steve Dibenedetto

Hello, My name is Steve Dibenedetto. I apologize to have contacted you this way without a direct relationship. There is an opportunity to collaborate with me in the sourcing of some materials needed by our company for production of the different medicines we are researching. I'm aware that this might be totally outside your professional specialization, but it will be a great source for generating extra revenue. I discovered a manufacturer who can supply us at a lower rate than our company's previous purchases. I will give you more specific details when/if I receive feedback from you showing interest. Warm Regards Steve Dibenedetto Production & Control Manager, Green Field Laboratories Gothic House, Barker Gate, Nottingham, NG1 1JU, United Kingdom.

3 years

1
0
0 0

Prawne zabezpieczenie firmy

by Maciej Kielar

Dzień dobry, czy są Państwo otwarci na rozmowe o współpracy z nasza Kancelarią? Obsługujemy firmy z województwa pomorskiego w zakresie kompleksowego wsparcia prawnego w rozszerzonym zakresie. Dzięki wieloletniej praktyce i współpracy z działalnościami Państwa formatu jestem w stanie wypracować korzystne rozwiązania pod względem podatkowym i organizacyjnym. Możemy się spotkać bądź porozmawiać telefonicznie? Pozdrawiam, Mec. Maciej Kielar

3 years

1
0
0 0

[PATCH] selftests/drivers/gpu: Add error messages to drm_mm.sh

by Gautam Menghani

Add error messages when the module test-drm_mm is not found or could not be removed to make tests output more readable. Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/drivers/gpu/drm_mm.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/gpu/drm_mm.sh b/tools/testing/selftests/drivers/gpu/drm_mm.sh index b789dc8257e6..09c76cd7661d 100755 --- a/tools/testing/selftests/drivers/gpu/drm_mm.sh +++ b/tools/testing/selftests/drivers/gpu/drm_mm.sh @@ -3,7 +3,7 @@ # Runs API tests for struct drm_mm (DRM range manager) if ! /sbin/modprobe -n -q test-drm_mm; then - echo "drivers/gpu/drm_mm: [skip]" + echo "drivers/gpu/drm_mm: module test-drm_mm is not found in /lib/modules/`uname -r` [skip]" exit 77 fi @@ -11,6 +11,6 @@ if /sbin/modprobe -q test-drm_mm; then /sbin/modprobe -q -r test-drm_mm echo "drivers/gpu/drm_mm: ok" else - echo "drivers/gpu/drm_mm: [FAIL]" + echo "drivers/gpu/drm_mm: module test-drm_mm could not be removed [FAIL]" exit 1 fi -- 2.36.1

3 years

1
0
0 0

[PATCH bpf-next v2] selftests/bpf: Use bpf_tcp_helpers.h together with vmlinux.h

by Jörn-Thorben Hinz

Hello there, sending a v2 to follow changes now available in master. Should have delayed the first submission. I’m looking for and am happy about feedback with this patch. It enables the usage of bpf_tcp_helpers.h together with vmlinux.h, as briefly discussed here[1]. This makes bpf_tcp_helpers.h reusable for other or external CC implementations that want to use vmlinux.h. After the merge of 6dc7a0baf1a7 ("selftests/bpf: Fix rare segfault in sock_fields prog test"), the below should be observable in the CI: There is currently one failing prog test with this patch: sock_fields. After including vmlinux.h there (for struct tcp_sock), it fails on skeleton-load when verifying egress_read_sock_fields(), around the call of is_loopback6(): ; return !a6[0] && !a6[1] && !a6[2] && a6[3] == bpf_htonl(1); 22: (56) if w2 != 0x0 goto pc-6 ; R2_w=P0 23: (b7) r3 = 28 ; R3_w=P28 24: (bf) r2 = r1 ; R1_w=sock_common(off=0,imm=0) R2_w=sock_common(off=0,imm=0) 25: (0f) r2 += r3 R2 pointer arithmetic on sock_common prohibited Was able to observe this with Clang 13, 14 and trunk/15 (ff5301dde981) and kernel/bpf-next at d4609a5d8c70 so far. The instructions generated for (the inlined call of) is_loopback6() are actually different here after switching to vmlinux.h. I’m still unsure why this is happening. [1] https://lore.kernel.org/bpf/20220614104452.3370148-4-jthinz@mailbox.tu-berl… Patch description: Remove type declarations from bpf_tcp_helpers.h. Modify files using this header accordingly and provide defines that where previously available from the UAPI headers. Also, include bpf_tracing.h or bpf_tracing_net.h instead of bpf_tcp_helpers.h where those are more appropriate. bpf_tcp_helpers.h moves to progs/, the same place as other headers to be included by BPF programs but not by userspace programs. v2: - Rebase on master for recently merged 6e945d57cc9f, 0735627d78ca, and 6dc7a0baf1a7 - Use bpf_tcp_helpers.h + vmlinux.h in recently added tcp_ca_* tests - Avoid redefinition of struct dctcp when it's compiled in Signed-off-by: Jörn-Thorben Hinz <jthinz(a)mailbox.tu-berlin.de> --- tools/testing/selftests/bpf/bpf_tcp_helpers.h | 241 ------------------ tools/testing/selftests/bpf/progs/bpf_cubic.c | 9 +- tools/testing/selftests/bpf/progs/bpf_dctcp.c | 10 +- .../selftests/bpf/progs/bpf_dctcp_release.c | 9 +- .../selftests/bpf/progs/bpf_tc_helpers.h | 7 + .../selftests/bpf/progs/bpf_tcp_helpers.h | 85 ++++++ .../selftests/bpf/progs/bpf_tcp_nogpl.c | 5 +- .../selftests/bpf/progs/bpf_tracing_net.h | 8 + .../bpf/progs/kfunc_call_test_subprog.c | 5 +- .../testing/selftests/bpf/progs/mptcp_sock.c | 7 +- .../selftests/bpf/progs/sockopt_qos_to_cc.c | 7 +- .../bpf/progs/tcp_ca_incompl_cong_ops.c | 7 +- .../bpf/progs/tcp_ca_write_sk_pacing.c | 9 +- .../bpf/progs/test_btf_skc_cls_ingress.c | 14 +- .../selftests/bpf/progs/test_sock_fields.c | 6 +- .../selftests/bpf/progs/test_tcpbpf_kern.c | 23 +- tools/testing/selftests/bpf/progs/timer.c | 2 +- tools/testing/selftests/bpf/progs/timer_mim.c | 2 +- .../selftests/bpf/progs/timer_mim_reject.c | 2 +- 19 files changed, 143 insertions(+), 315 deletions(-) delete mode 100644 tools/testing/selftests/bpf/bpf_tcp_helpers.h create mode 100644 tools/testing/selftests/bpf/progs/bpf_tc_helpers.h create mode 100644 tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h diff --git a/tools/testing/selftests/bpf/bpf_tcp_helpers.h b/tools/testing/selftests/bpf/bpf_tcp_helpers.h deleted file mode 100644 index 82a7c9de95f9..000000000000 --- a/tools/testing/selftests/bpf/bpf_tcp_helpers.h +++ /dev/null @@ -1,241 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __BPF_TCP_HELPERS_H -#define __BPF_TCP_HELPERS_H - -#include <stdbool.h> -#include <linux/types.h> -#include <bpf/bpf_helpers.h> -#include <bpf/bpf_core_read.h> -#include <bpf/bpf_tracing.h> - -#define BPF_STRUCT_OPS(name, args...) \ -SEC("struct_ops/"#name) \ -BPF_PROG(name, args) - -#ifndef SOL_TCP -#define SOL_TCP 6 -#endif - -#ifndef TCP_CA_NAME_MAX -#define TCP_CA_NAME_MAX 16 -#endif - -#define tcp_jiffies32 ((__u32)bpf_jiffies64()) - -struct sock_common { - unsigned char skc_state; - __u16 skc_num; -} __attribute__((preserve_access_index)); - -enum sk_pacing { - SK_PACING_NONE = 0, - SK_PACING_NEEDED = 1, - SK_PACING_FQ = 2, -}; - -struct sock { - struct sock_common __sk_common; -#define sk_state __sk_common.skc_state - unsigned long sk_pacing_rate; - __u32 sk_pacing_status; /* see enum sk_pacing */ -} __attribute__((preserve_access_index)); - -struct inet_sock { - struct sock sk; -} __attribute__((preserve_access_index)); - -struct inet_connection_sock { - struct inet_sock icsk_inet; - __u8 icsk_ca_state:6, - icsk_ca_setsockopt:1, - icsk_ca_dst_locked:1; - struct { - __u8 pending; - } icsk_ack; - __u64 icsk_ca_priv[104 / sizeof(__u64)]; -} __attribute__((preserve_access_index)); - -struct request_sock { - struct sock_common __req_common; -} __attribute__((preserve_access_index)); - -struct tcp_sock { - struct inet_connection_sock inet_conn; - - __u32 rcv_nxt; - __u32 snd_nxt; - __u32 snd_una; - __u32 window_clamp; - __u8 ecn_flags; - __u32 delivered; - __u32 delivered_ce; - __u32 snd_cwnd; - __u32 snd_cwnd_cnt; - __u32 snd_cwnd_clamp; - __u32 snd_ssthresh; - __u8 syn_data:1, /* SYN includes data */ - syn_fastopen:1, /* SYN includes Fast Open option */ - syn_fastopen_exp:1,/* SYN includes Fast Open exp. option */ - syn_fastopen_ch:1, /* Active TFO re-enabling probe */ - syn_data_acked:1,/* data in SYN is acked by SYN-ACK */ - save_syn:1, /* Save headers of SYN packet */ - is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */ - syn_smc:1; /* SYN includes SMC */ - __u32 max_packets_out; - __u32 lsndtime; - __u32 prior_cwnd; - __u64 tcp_mstamp; /* most recent packet received/sent */ - bool is_mptcp; -} __attribute__((preserve_access_index)); - -static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk) -{ - return (struct inet_connection_sock *)sk; -} - -static __always_inline void *inet_csk_ca(const struct sock *sk) -{ - return (void *)inet_csk(sk)->icsk_ca_priv; -} - -static __always_inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - -static __always_inline bool before(__u32 seq1, __u32 seq2) -{ - return (__s32)(seq1-seq2) < 0; -} -#define after(seq2, seq1) before(seq1, seq2) - -#define TCP_ECN_OK 1 -#define TCP_ECN_QUEUE_CWR 2 -#define TCP_ECN_DEMAND_CWR 4 -#define TCP_ECN_SEEN 8 - -enum inet_csk_ack_state_t { - ICSK_ACK_SCHED = 1, - ICSK_ACK_TIMER = 2, - ICSK_ACK_PUSHED = 4, - ICSK_ACK_PUSHED2 = 8, - ICSK_ACK_NOW = 16 /* Send the next ACK immediately (once) */ -}; - -enum tcp_ca_event { - CA_EVENT_TX_START = 0, - CA_EVENT_CWND_RESTART = 1, - CA_EVENT_COMPLETE_CWR = 2, - CA_EVENT_LOSS = 3, - CA_EVENT_ECN_NO_CE = 4, - CA_EVENT_ECN_IS_CE = 5, -}; - -struct ack_sample { - __u32 pkts_acked; - __s32 rtt_us; - __u32 in_flight; -} __attribute__((preserve_access_index)); - -struct rate_sample { - __u64 prior_mstamp; /* starting timestamp for interval */ - __u32 prior_delivered; /* tp->delivered at "prior_mstamp" */ - __s32 delivered; /* number of packets delivered over interval */ - long interval_us; /* time for tp->delivered to incr "delivered" */ - __u32 snd_interval_us; /* snd interval for delivered packets */ - __u32 rcv_interval_us; /* rcv interval for delivered packets */ - long rtt_us; /* RTT of last (S)ACKed packet (or -1) */ - int losses; /* number of packets marked lost upon ACK */ - __u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */ - __u32 prior_in_flight; /* in flight before this ACK */ - bool is_app_limited; /* is sample from packet with bubble in pipe? */ - bool is_retrans; /* is sample from retransmission? */ - bool is_ack_delayed; /* is this (likely) a delayed ACK? */ -} __attribute__((preserve_access_index)); - -#define TCP_CA_NAME_MAX 16 -#define TCP_CONG_NEEDS_ECN 0x2 - -struct tcp_congestion_ops { - char name[TCP_CA_NAME_MAX]; - __u32 flags; - - /* initialize private data (optional) */ - void (*init)(struct sock *sk); - /* cleanup private data (optional) */ - void (*release)(struct sock *sk); - - /* return slow start threshold (required) */ - __u32 (*ssthresh)(struct sock *sk); - /* do new cwnd calculation (required) */ - void (*cong_avoid)(struct sock *sk, __u32 ack, __u32 acked); - /* call before changing ca_state (optional) */ - void (*set_state)(struct sock *sk, __u8 new_state); - /* call when cwnd event occurs (optional) */ - void (*cwnd_event)(struct sock *sk, enum tcp_ca_event ev); - /* call when ack arrives (optional) */ - void (*in_ack_event)(struct sock *sk, __u32 flags); - /* new value of cwnd after loss (required) */ - __u32 (*undo_cwnd)(struct sock *sk); - /* hook for packet ack accounting (optional) */ - void (*pkts_acked)(struct sock *sk, const struct ack_sample *sample); - /* override sysctl_tcp_min_tso_segs */ - __u32 (*min_tso_segs)(struct sock *sk); - /* returns the multiplier used in tcp_sndbuf_expand (optional) */ - __u32 (*sndbuf_expand)(struct sock *sk); - /* call when packets are delivered to update cwnd and pacing rate, - * after all the ca_state processing. (optional) - */ - void (*cong_control)(struct sock *sk, const struct rate_sample *rs); - void *owner; -}; - -#define min(a, b) ((a) < (b) ? (a) : (b)) -#define max(a, b) ((a) > (b) ? (a) : (b)) -#define min_not_zero(x, y) ({ \ - typeof(x) __x = (x); \ - typeof(y) __y = (y); \ - __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); }) - -static __always_inline bool tcp_in_slow_start(const struct tcp_sock *tp) -{ - return tp->snd_cwnd < tp->snd_ssthresh; -} - -static __always_inline bool tcp_is_cwnd_limited(const struct sock *sk) -{ - const struct tcp_sock *tp = tcp_sk(sk); - - /* If in slow start, ensure cwnd grows to twice what was ACKed. */ - if (tcp_in_slow_start(tp)) - return tp->snd_cwnd < 2 * tp->max_packets_out; - - return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited); -} - -static __always_inline bool tcp_cc_eq(const char *a, const char *b) -{ - int i; - - for (i = 0; i < TCP_CA_NAME_MAX; i++) { - if (a[i] != b[i]) - return false; - if (!a[i]) - break; - } - - return true; -} - -extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym; -extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym; - -struct mptcp_sock { - struct inet_connection_sock sk; - - __u32 token; - struct sock *first; - char ca_name[TCP_CA_NAME_MAX]; -} __attribute__((preserve_access_index)); - -#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_cubic.c b/tools/testing/selftests/bpf/progs/bpf_cubic.c index d9660e7200e2..7759b61be912 100644 --- a/tools/testing/selftests/bpf/progs/bpf_cubic.c +++ b/tools/testing/selftests/bpf/progs/bpf_cubic.c @@ -14,9 +14,12 @@ * "ca->ack_cnt / delta" operation. */ -#include <linux/bpf.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#define bictcp bictcp___not_used +#include "vmlinux.h" +#undef bictcp + +#include <bpf/bpf_helpers.h> +#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp.c b/tools/testing/selftests/bpf/progs/bpf_dctcp.c index 9573be6122be..bd410316b09c 100644 --- a/tools/testing/selftests/bpf/progs/bpf_dctcp.c +++ b/tools/testing/selftests/bpf/progs/bpf_dctcp.c @@ -6,14 +6,14 @@ * the kernel BPF logic. */ -#include <stddef.h> -#include <linux/bpf.h> -#include <linux/types.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#define dctcp dctcp___not_used +#include "vmlinux.h" +#undef dctcp + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c index d836f7c372f0..895dd3a3e2b9 100644 --- a/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c +++ b/tools/testing/selftests/bpf/progs/bpf_dctcp_release.c @@ -1,14 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <stddef.h> -#include <linux/bpf.h> -#include <linux/types.h> -#include <linux/stddef.h> -#include <linux/tcp.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; const char cubic[] = "cubic"; diff --git a/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h b/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h new file mode 100644 index 000000000000..fef72cba6298 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/bpf_tc_helpers.h @@ -0,0 +1,7 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __BPF_TC_HELPERS_H +#define __BPF_TC_HELPERS_H + +#define TC_ACT_OK 0 + +#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h b/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h new file mode 100644 index 000000000000..a8659fed2c18 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/bpf_tcp_helpers.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __BPF_TCP_HELPERS_H +#define __BPF_TCP_HELPERS_H + +#include <bpf/bpf_helpers.h> +#include <bpf/bpf_core_read.h> +#include <bpf/bpf_tracing.h> + +#include "bpf_tracing_net.h" + +#define BPF_STRUCT_OPS(name, args...) \ +SEC("struct_ops/"#name) \ +BPF_PROG(name, args) + +#define tcp_jiffies32 ((__u32)bpf_jiffies64()) + +static __always_inline struct inet_connection_sock *inet_csk(const struct sock *sk) +{ + return (struct inet_connection_sock *)sk; +} + +static __always_inline void *inet_csk_ca(const struct sock *sk) +{ + return (void *)inet_csk(sk)->icsk_ca_priv; +} + +static __always_inline struct tcp_sock *tcp_sk(const struct sock *sk) +{ + return (struct tcp_sock *)sk; +} + +static __always_inline bool before(__u32 seq1, __u32 seq2) +{ + return (__s32)(seq1-seq2) < 0; +} +#define after(seq2, seq1) before(seq1, seq2) + +#define TCP_ECN_OK 1 +#define TCP_ECN_QUEUE_CWR 2 +#define TCP_ECN_DEMAND_CWR 4 +#define TCP_ECN_SEEN 8 + +#define TCP_CONG_NEEDS_ECN 0x2 + +#define min(a, b) ((a) < (b) ? (a) : (b)) +#define max(a, b) ((a) > (b) ? (a) : (b)) +#define min_not_zero(x, y) ({ \ + typeof(x) __x = (x); \ + typeof(y) __y = (y); \ + __x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); }) + +static __always_inline bool tcp_in_slow_start(const struct tcp_sock *tp) +{ + return tp->snd_cwnd < tp->snd_ssthresh; +} + +static __always_inline bool tcp_is_cwnd_limited(const struct sock *sk) +{ + const struct tcp_sock *tp = tcp_sk(sk); + + /* If in slow start, ensure cwnd grows to twice what was ACKed. */ + if (tcp_in_slow_start(tp)) + return tp->snd_cwnd < 2 * tp->max_packets_out; + + return !!BPF_CORE_READ_BITFIELD(tp, is_cwnd_limited); +} + +static __always_inline bool tcp_cc_eq(const char *a, const char *b) +{ + int i; + + for (i = 0; i < TCP_CA_NAME_MAX; i++) { + if (a[i] != b[i]) + return false; + if (!a[i]) + break; + } + + return true; +} + +extern __u32 tcp_slow_start(struct tcp_sock *tp, __u32 acked) __ksym; +extern void tcp_cong_avoid_ai(struct tcp_sock *tp, __u32 w, __u32 acked) __ksym; + +#endif diff --git a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c index 2ecd833dcd41..3734d49ccba9 100644 --- a/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c +++ b/tools/testing/selftests/bpf/progs/bpf_tcp_nogpl.c @@ -1,9 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/bpf.h> -#include <linux/types.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h" char _license[] SEC("license") = "X"; diff --git a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h index 1c1289ba5fc5..f06410392efc 100644 --- a/tools/testing/selftests/bpf/progs/bpf_tracing_net.h +++ b/tools/testing/selftests/bpf/progs/bpf_tracing_net.h @@ -2,16 +2,24 @@ #ifndef __BPF_TRACING_NET_H__ #define __BPF_TRACING_NET_H__ +#define ETH_P_IPV6 0x86DD + #define AF_INET 2 #define AF_INET6 10 +#define SOL_IPV6 41 +#define IPV6_TCLASS 67 + #define SOL_SOCKET 1 #define SO_SNDBUF 7 #define __SO_ACCEPTCON (1 << 16) #define SOL_TCP 6 +#define TCP_WINDOW_CLAMP 10 #define TCP_CONGESTION 13 #define TCP_CA_NAME_MAX 16 +#define TCP_SAVE_SYN 27 +#define TCP_SAVED_SYN 28 #define ICSK_TIME_RETRANS 1 #define ICSK_TIME_PROBE0 3 diff --git a/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c b/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c index c1fdecabeabf..ce34ac85a378 100644 --- a/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c +++ b/tools/testing/selftests/bpf/progs/kfunc_call_test_subprog.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <linux/bpf.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" extern const int bpf_prog_active __ksym; extern __u64 bpf_kfunc_call_test1(struct sock *sk, __u32 a, __u64 b, diff --git a/tools/testing/selftests/bpf/progs/mptcp_sock.c b/tools/testing/selftests/bpf/progs/mptcp_sock.c index 91a0d7eff2ac..b7a861b948b3 100644 --- a/tools/testing/selftests/bpf/progs/mptcp_sock.c +++ b/tools/testing/selftests/bpf/progs/mptcp_sock.c @@ -2,9 +2,12 @@ /* Copyright (c) 2020, Tessares SA. */ /* Copyright (c) 2022, SUSE. */ -#include <linux/bpf.h> +#include "vmlinux.h" + +#include <bpf/bpf_core_read.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; __u32 token = 0; diff --git a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c index 1bce83b6e3a7..ca712362cfe7 100644 --- a/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c +++ b/tools/testing/selftests/bpf/progs/sockopt_qos_to_cc.c @@ -1,11 +1,10 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2021 Facebook */ -#include <string.h> -#include <linux/tcp.h> -#include <netinet/in.h> -#include <linux/bpf.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> #include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c index 7bb872fb22dd..e3e523dc2822 100644 --- a/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c +++ b/tools/testing/selftests/bpf/progs/tcp_ca_incompl_cong_ops.c @@ -2,16 +2,13 @@ #include "vmlinux.h" +#include "bpf_tcp_helpers.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; -static inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - SEC("struct_ops/incompl_cong_ops_ssthresh") __u32 BPF_PROG(incompl_cong_ops_ssthresh, struct sock *sk) { diff --git a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c index 43447704cf0e..dfd01deb1ed7 100644 --- a/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c +++ b/tools/testing/selftests/bpf/progs/tcp_ca_write_sk_pacing.c @@ -2,6 +2,8 @@ #include "vmlinux.h" +#include "bpf_tcp_helpers.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> @@ -9,13 +11,6 @@ char _license[] SEC("license") = "GPL"; #define USEC_PER_SEC 1000000UL -#define min(a, b) ((a) < (b) ? (a) : (b)) - -static inline struct tcp_sock *tcp_sk(const struct sock *sk) -{ - return (struct tcp_sock *)sk; -} - SEC("struct_ops/write_sk_pacing_init") void BPF_PROG(write_sk_pacing_init, struct sock *sk) { diff --git a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c index e2bea4da194b..72c20d40468b 100644 --- a/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c +++ b/tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c @@ -1,19 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2020 Facebook */ -#include <string.h> -#include <errno.h> -#include <netinet/in.h> -#include <linux/stddef.h> -#include <linux/bpf.h> -#include <linux/ipv6.h> -#include <linux/tcp.h> -#include <linux/if_ether.h> -#include <linux/pkt_cls.h> +#include "vmlinux.h" +#include <errno.h> #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tc_helpers.h" +#include "bpf_tracing_net.h" struct sockaddr_in6 srv_sa6 = {}; __u16 listen_tp_sport = 0; diff --git a/tools/testing/selftests/bpf/progs/test_sock_fields.c b/tools/testing/selftests/bpf/progs/test_sock_fields.c index 9f4b8f9f1181..d9ee861061aa 100644 --- a/tools/testing/selftests/bpf/progs/test_sock_fields.c +++ b/tools/testing/selftests/bpf/progs/test_sock_fields.c @@ -1,13 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2019 Facebook */ -#include <linux/bpf.h> -#include <netinet/in.h> -#include <stdbool.h> +#include "vmlinux.h" #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" enum bpf_linum_array_idx { EGRESS_LINUM_IDX, diff --git a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c index 3ded05280757..5315a1ec06a2 100644 --- a/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c +++ b/tools/testing/selftests/bpf/progs/test_tcpbpf_kern.c @@ -1,30 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include <stddef.h> -#include <string.h> -#include <netinet/in.h> -#include <linux/bpf.h> -#include <linux/if_ether.h> -#include <linux/if_packet.h> -#include <linux/ip.h> -#include <linux/ipv6.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/tcp.h> +#include "vmlinux.h" + #include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> -#include "bpf_tcp_helpers.h" +#include "bpf_tracing_net.h" #include "test_tcpbpf.h" struct tcpbpf_globals global = {}; -/** - * SOL_TCP is defined in <netinet/tcp.h> while - * TCP_SAVED_SYN is defined in already included <linux/tcp.h> - */ -#ifndef SOL_TCP -#define SOL_TCP 6 -#endif - static __always_inline int get_tp_window_clamp(struct bpf_sock_ops *skops) { struct bpf_sock *sk; diff --git a/tools/testing/selftests/bpf/progs/timer.c b/tools/testing/selftests/bpf/progs/timer.c index 5f5309791649..c2aa74aef4e0 100644 --- a/tools/testing/selftests/bpf/progs/timer.c +++ b/tools/testing/selftests/bpf/progs/timer.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { diff --git a/tools/testing/selftests/bpf/progs/timer_mim.c b/tools/testing/selftests/bpf/progs/timer_mim.c index 2fee7ab105ef..50ebc3f68522 100644 --- a/tools/testing/selftests/bpf/progs/timer_mim.c +++ b/tools/testing/selftests/bpf/progs/timer_mim.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { diff --git a/tools/testing/selftests/bpf/progs/timer_mim_reject.c b/tools/testing/selftests/bpf/progs/timer_mim_reject.c index 5d648e3d8a41..dd3f1ed6d6e6 100644 --- a/tools/testing/selftests/bpf/progs/timer_mim_reject.c +++ b/tools/testing/selftests/bpf/progs/timer_mim_reject.c @@ -4,7 +4,7 @@ #include <time.h> #include <errno.h> #include <bpf/bpf_helpers.h> -#include "bpf_tcp_helpers.h" +#include <bpf/bpf_tracing.h> char _license[] SEC("license") = "GPL"; struct hmap_elem { -- 2.30.2

3 years

2
1
0 0

Re: [PATCH v4] kselftests/damon: add support for cases where debugfs cannot be read

by Gautam Menghani

Cc'ing everyone as I forgot to group reply before. Also, I have included the example outputs in this reply. On Tue, Jun 28, 2022 at 12:12:15AM +0530, Gautam Menghani wrote: > On Mon, Jun 27, 2022 at 11:00:18AM -0600, Shuah Khan wrote: > > On 6/25/22 2:03 PM, SeongJae Park wrote: > > > Hi Gautam, > > > > > > On Sun, 26 Jun 2022 01:22:45 +0530 Gautam <gautammenghani201(a)gmail.com> wrote: > > > > > > > The kernel is in lockdown mode when secureboot is enabled and hence > > > > debugfs cannot be used. Add support for this and other general cases > > > > where debugfs cannot be read and communicate the same to the user before > > > > running tests. > > > > > > > > Signed-off-by: Gautam <gautammenghani201(a)gmail.com> > > > > > > Reviewed-by: SeongJae Park <sj(a)kernel.org> > > > > > > > > > Thanks, > > > SJ > > > > > > > --- > > > > Changes in v2: > > > > 1. Modify the error message to account for general cases. > > > > 2. Change the return code so that the test is skipped. > > > > > > > > Changes in v3: > > > > 1. Change the name of variable holding the error message. > > > > > > > > Changes in v4: > > > > 1. Correct the mode of the source file. > > > > > > > > tools/testing/selftests/damon/_chk_dependency.sh | 10 ++++++++++ > > > > 1 file changed, 10 insertions(+) > > > > > > > > diff --git a/tools/testing/selftests/damon/_chk_dependency.sh b/tools/testing/selftests/damon/_chk_dependency.sh > > > > index 0189db81550b..0328ac0b5a5e 100644 > > > > --- a/tools/testing/selftests/damon/_chk_dependency.sh > > > > +++ b/tools/testing/selftests/damon/_chk_dependency.sh > > > > @@ -26,3 +26,13 @@ do > > > > exit 1 > > > > fi > > > > done > > > > + > > > > +permission_error="Operation not permitted" > > > > +for f in attrs target_ids monitor_on > > > > +do > > > > + status=$( cat "$DBGFS/$f" 2>&1 ) > > > > + if [ "${status#*$permission_error}" != "$status" ]; then > > > > + echo "Permission for reading $DBGFS/$f denied; maybe secureboot enabled?" > > > > btw - does this run as a regular user or does it need root privilege? > > If so add a test for that and skip with a message. > > Yes this condition is reachable only with root user. If damon tests are run > as regular user, the root check condition already skips the tests. > > Tests output as regular user: > +TAP version 13 > +1..6 > +# selftests: damon: debugfs_attrs.sh > +# Run as root > +ok 1 selftests: damon: debugfs_attrs.sh # SKIP > +# selftests: damon: debugfs_schemes.sh > +# Run as root > > Tests output as root user: > +TAP version 13 > +1..6 > +# selftests: damon: debugfs_attrs.sh > +# Permission for reading /sys/kernel/debug/damon/attrs denied; maybe secureboot enabled? > +ok 1 selftests: damon: debugfs_attrs.sh # SKIP > +# selftests: damon: debugfs_schemes.sh > +# Permission for reading /sys/kernel/debug/damon/attrs denied; maybe secureboot enabled? > > Is any change needed in this patch? > > > > > + exit $ksft_skip > > > > + fi > > > > +done > > > > -- > > > > 2.36.1 > > > > > thanks, > > -- Shuah

3 years

1
0
0 0

[PATCH AUTOSEL 5.15 11/41] selftests: vm: Fix resource leak when return error

by Sasha Levin

From: Ding Xiang <dingxiang(a)cmss.chinamobile.com> [ Upstream commit 3084a4ec7f9bb1ec90036cfd01b1abadc5dd4fb2 ] When return on an error path, file handle need to be closed to prevent resource leak Signed-off-by: Ding Xiang <dingxiang(a)cmss.chinamobile.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c index b61dcdb44c5b..b31f7a17d92a 100644 --- a/tools/testing/selftests/vm/ksm_tests.c +++ b/tools/testing/selftests/vm/ksm_tests.c @@ -48,6 +48,7 @@ static int ksm_write_sysfs(const char *file_path, unsigned long val) } if (fprintf(f, "%lu", val) < 0) { perror("fprintf"); + fclose(f); return 1; } fclose(f); @@ -66,6 +67,7 @@ static int ksm_read_sysfs(const char *file_path, unsigned long *val) } if (fscanf(f, "%lu", val) != 1) { perror("fscanf"); + fclose(f); return 1; } fclose(f); -- 2.35.1

3 years

1
0
0 0

[PATCH AUTOSEL 5.18 17/53] selftests/bpf: Shuffle cookies symbols in kprobe multi test

by Sasha Levin

From: Jiri Olsa <jolsa(a)kernel.org> [ Upstream commit ad8848535e97f4a5374fc68f7a5d16e2565940cc ] There's a kernel bug that causes cookies to be misplaced and the reason we did not catch this with this test is that we provide bpf_fentry_test* functions already sorted by name. Shuffling function bpf_fentry_test2 deeper in the list and keeping the current cookie values as before will trigger the bug. The kernel fix is coming in following changes. Acked-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Jiri Olsa <jolsa(a)kernel.org> Link: https://lore.kernel.org/r/20220615112118.497303-2-jolsa@kernel.org Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/bpf/prog_tests/bpf_cookie.c | 78 +++++++++---------- .../selftests/bpf/progs/kprobe_multi.c | 24 +++--- 2 files changed, 51 insertions(+), 51 deletions(-) diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c index 923a6139b2d8..aebbbb8f983f 100644 --- a/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c +++ b/tools/testing/selftests/bpf/prog_tests/bpf_cookie.c @@ -118,24 +118,24 @@ static void kprobe_multi_link_api_subtest(void) }) GET_ADDR("bpf_fentry_test1", addrs[0]); - GET_ADDR("bpf_fentry_test2", addrs[1]); - GET_ADDR("bpf_fentry_test3", addrs[2]); - GET_ADDR("bpf_fentry_test4", addrs[3]); - GET_ADDR("bpf_fentry_test5", addrs[4]); - GET_ADDR("bpf_fentry_test6", addrs[5]); - GET_ADDR("bpf_fentry_test7", addrs[6]); + GET_ADDR("bpf_fentry_test3", addrs[1]); + GET_ADDR("bpf_fentry_test4", addrs[2]); + GET_ADDR("bpf_fentry_test5", addrs[3]); + GET_ADDR("bpf_fentry_test6", addrs[4]); + GET_ADDR("bpf_fentry_test7", addrs[5]); + GET_ADDR("bpf_fentry_test2", addrs[6]); GET_ADDR("bpf_fentry_test8", addrs[7]); #undef GET_ADDR - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.kprobe_multi.addrs = (const unsigned long *) &addrs; opts.kprobe_multi.cnt = ARRAY_SIZE(addrs); @@ -146,14 +146,14 @@ static void kprobe_multi_link_api_subtest(void) if (!ASSERT_GE(link1_fd, 0, "link1_fd")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.kprobe_multi.flags = BPF_F_KPROBE_MULTI_RETURN; prog_fd = bpf_program__fd(skel->progs.test_kretprobe); @@ -178,12 +178,12 @@ static void kprobe_multi_attach_api_subtest(void) struct kprobe_multi *skel = NULL; const char *syms[8] = { "bpf_fentry_test1", - "bpf_fentry_test2", "bpf_fentry_test3", "bpf_fentry_test4", "bpf_fentry_test5", "bpf_fentry_test6", "bpf_fentry_test7", + "bpf_fentry_test2", "bpf_fentry_test8", }; __u64 cookies[8]; @@ -195,14 +195,14 @@ static void kprobe_multi_attach_api_subtest(void) skel->bss->pid = getpid(); skel->bss->test_cookie = true; - cookies[0] = 1; - cookies[1] = 2; - cookies[2] = 3; - cookies[3] = 4; - cookies[4] = 5; - cookies[5] = 6; - cookies[6] = 7; - cookies[7] = 8; + cookies[0] = 1; /* bpf_fentry_test1 */ + cookies[1] = 2; /* bpf_fentry_test3 */ + cookies[2] = 3; /* bpf_fentry_test4 */ + cookies[3] = 4; /* bpf_fentry_test5 */ + cookies[4] = 5; /* bpf_fentry_test6 */ + cookies[5] = 6; /* bpf_fentry_test7 */ + cookies[6] = 7; /* bpf_fentry_test2 */ + cookies[7] = 8; /* bpf_fentry_test8 */ opts.syms = syms; opts.cnt = ARRAY_SIZE(syms); @@ -213,14 +213,14 @@ static void kprobe_multi_attach_api_subtest(void) if (!ASSERT_OK_PTR(link1, "bpf_program__attach_kprobe_multi_opts")) goto cleanup; - cookies[0] = 8; - cookies[1] = 7; - cookies[2] = 6; - cookies[3] = 5; - cookies[4] = 4; - cookies[5] = 3; - cookies[6] = 2; - cookies[7] = 1; + cookies[0] = 8; /* bpf_fentry_test1 */ + cookies[1] = 7; /* bpf_fentry_test3 */ + cookies[2] = 6; /* bpf_fentry_test4 */ + cookies[3] = 5; /* bpf_fentry_test5 */ + cookies[4] = 4; /* bpf_fentry_test6 */ + cookies[5] = 3; /* bpf_fentry_test7 */ + cookies[6] = 2; /* bpf_fentry_test2 */ + cookies[7] = 1; /* bpf_fentry_test8 */ opts.retprobe = true; diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi.c b/tools/testing/selftests/bpf/progs/kprobe_multi.c index 600be50800f8..8e06c49aa65a 100644 --- a/tools/testing/selftests/bpf/progs/kprobe_multi.c +++ b/tools/testing/selftests/bpf/progs/kprobe_multi.c @@ -54,21 +54,21 @@ static void kprobe_multi_check(void *ctx, bool is_return) if (is_return) { SET(kretprobe_test1_result, &bpf_fentry_test1, 8); - SET(kretprobe_test2_result, &bpf_fentry_test2, 7); - SET(kretprobe_test3_result, &bpf_fentry_test3, 6); - SET(kretprobe_test4_result, &bpf_fentry_test4, 5); - SET(kretprobe_test5_result, &bpf_fentry_test5, 4); - SET(kretprobe_test6_result, &bpf_fentry_test6, 3); - SET(kretprobe_test7_result, &bpf_fentry_test7, 2); + SET(kretprobe_test2_result, &bpf_fentry_test2, 2); + SET(kretprobe_test3_result, &bpf_fentry_test3, 7); + SET(kretprobe_test4_result, &bpf_fentry_test4, 6); + SET(kretprobe_test5_result, &bpf_fentry_test5, 5); + SET(kretprobe_test6_result, &bpf_fentry_test6, 4); + SET(kretprobe_test7_result, &bpf_fentry_test7, 3); SET(kretprobe_test8_result, &bpf_fentry_test8, 1); } else { SET(kprobe_test1_result, &bpf_fentry_test1, 1); - SET(kprobe_test2_result, &bpf_fentry_test2, 2); - SET(kprobe_test3_result, &bpf_fentry_test3, 3); - SET(kprobe_test4_result, &bpf_fentry_test4, 4); - SET(kprobe_test5_result, &bpf_fentry_test5, 5); - SET(kprobe_test6_result, &bpf_fentry_test6, 6); - SET(kprobe_test7_result, &bpf_fentry_test7, 7); + SET(kprobe_test2_result, &bpf_fentry_test2, 7); + SET(kprobe_test3_result, &bpf_fentry_test3, 2); + SET(kprobe_test4_result, &bpf_fentry_test4, 3); + SET(kprobe_test5_result, &bpf_fentry_test5, 4); + SET(kprobe_test6_result, &bpf_fentry_test6, 5); + SET(kprobe_test7_result, &bpf_fentry_test7, 6); SET(kprobe_test8_result, &bpf_fentry_test8, 8); } -- 2.35.1

3 years

1
0
0 0

[PATCH AUTOSEL 5.18 13/53] selftests: vm: Fix resource leak when return error

by Sasha Levin

From: Ding Xiang <dingxiang(a)cmss.chinamobile.com> [ Upstream commit 3084a4ec7f9bb1ec90036cfd01b1abadc5dd4fb2 ] When return on an error path, file handle need to be closed to prevent resource leak Signed-off-by: Ding Xiang <dingxiang(a)cmss.chinamobile.com> Reviewed-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/vm/ksm_tests.c b/tools/testing/selftests/vm/ksm_tests.c index fd85f15869d1..aa834b04daa8 100644 --- a/tools/testing/selftests/vm/ksm_tests.c +++ b/tools/testing/selftests/vm/ksm_tests.c @@ -54,6 +54,7 @@ static int ksm_write_sysfs(const char *file_path, unsigned long val) } if (fprintf(f, "%lu", val) < 0) { perror("fprintf"); + fclose(f); return 1; } fclose(f); @@ -72,6 +73,7 @@ static int ksm_read_sysfs(const char *file_path, unsigned long *val) } if (fscanf(f, "%lu", val) != 1) { perror("fscanf"); + fclose(f); return 1; } fclose(f); -- 2.35.1

3 years

1
0
0 0

[PATCH AUTOSEL 5.18 09/53] selftests: Fix clang cross compilation

by Sasha Levin

From: Mark Brown <broonie(a)kernel.org> [ Upstream commit 795285ef242543bb636556b7225f20adb7d3795c ] Unlike GCC clang uses a single compiler image to support multiple target architectures meaning that we can't simply rely on CROSS_COMPILE to select the output architecture. Instead we must pass --target to the compiler to tell it what to output, kselftest was not doing this so cross compilation of kselftest using clang resulted in kselftest being built for the host architecture. More work is required to fix tests using custom rules but this gets the bulk of things building. Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/lib.mk | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 2a2d240cdc1b..1a5cc3cd97ec 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -7,10 +7,31 @@ else ifneq ($(filter -%,$(LLVM)),) LLVM_SUFFIX := $(LLVM) endif -CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) +CLANG_TARGET_FLAGS_arm := arm-linux-gnueabi +CLANG_TARGET_FLAGS_arm64 := aarch64-linux-gnu +CLANG_TARGET_FLAGS_hexagon := hexagon-linux-musl +CLANG_TARGET_FLAGS_m68k := m68k-linux-gnu +CLANG_TARGET_FLAGS_mips := mipsel-linux-gnu +CLANG_TARGET_FLAGS_powerpc := powerpc64le-linux-gnu +CLANG_TARGET_FLAGS_riscv := riscv64-linux-gnu +CLANG_TARGET_FLAGS_s390 := s390x-linux-gnu +CLANG_TARGET_FLAGS_x86 := x86_64-linux-gnu +CLANG_TARGET_FLAGS := $(CLANG_TARGET_FLAGS_$(ARCH)) + +ifeq ($(CROSS_COMPILE),) +ifeq ($(CLANG_TARGET_FLAGS),) +$(error Specify CROSS_COMPILE or add '--target=' option to lib.mk +else +CLANG_FLAGS += --target=$(CLANG_TARGET_FLAGS) +endif # CLANG_TARGET_FLAGS +else +CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) +endif # CROSS_COMPILE + +CC := $(LLVM_PREFIX)clang$(LLVM_SUFFIX) $(CLANG_FLAGS) -fintegrated-as else CC := $(CROSS_COMPILE)gcc -endif +endif # LLVM ifeq (0,$(MAKELEVEL)) ifeq ($(OUTPUT),) -- 2.35.1

3 years

1
0
0 0

kselftest/next kselftest-seccomp: 6 runs, 1 regressions (v5.19-rc4-4-g43fe0cc46b62)

by kernelci.org bot

kselftest/next kselftest-seccomp: 6 runs, 1 regressions (v5.19-rc4-4-g43fe0cc46b62) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v5.19-rc4-4-g43f… Test: kselftest-seccomp Tree: kselftest Branch: next Describe: v5.19-rc4-4-g43fe0cc46b62 URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 43fe0cc46b6206b25f0f13bb249f0078441ae15a Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions -----------------------------+-------+--------------+----------+---------------------+------------ meson-gxl-s905x-libretech-cc | arm64 | lab-baylibre | gcc-10 | defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/62ba5536844f0e323ea39bec Results: 0 PASS, 1 FAIL, 0 SKIP Full config: defconfig+kselftest Compiler: gcc-10 (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-4-g43fe0cc46b62/arm6… HTML log: https://storage.kernelci.org//kselftest/next/v5.19-rc4-4-g43fe0cc46b62/arm6… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2022062… * kselftest-seccomp.login: https://kernelci.org/test/case/id/62ba5536844f0e323ea39bed new failure (last pass: v5.19-rc1)

3 years

1
0
0 0

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-4-g43fe0cc46b62)

by kernelci.org bot

kselftest/next build: 8 builds: 0 failed, 8 passed (v5.19-rc4-4-g43fe0cc46b62) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v5.19-rc4-4-g43fe0c… Tree: kselftest Branch: next Git Describe: v5.19-rc4-4-g43fe0cc46b62 Git Commit: 43fe0cc46b6206b25f0f13bb249f0078441ae15a Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+kselftest+arm64-chromebook (arm64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-14) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years

1
0
0 0

[PATCH] kunit: tool: Enable virtio/PCI by default on UML

by David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Signed-off-by: David Gow <davidgow(a)google.com> --- NOTE: This has dependencies on the 'make --kunitconfig repeatable' series: https://lore.kernel.org/linux-kselftest/20220624001247.3255978-1-dlatypov@g… which, in turn, depends on: https://lore.kernel.org/linux-kselftest/20220520224200.3764027-1-dlatypov@g… Please apply those first. Changes since RFC: https://lore.kernel.org/linux-kselftest/20220622035326.759935-1-davidgow@go… - Rebase on top of the previous kconfig patches. - Fix a missing make_arch_qemuconfig->make_arch_config rename (Thanks Brendan) - Fix the tests to use the base LinuxSourceTreeOperations class, which has no default kconfig options (and so won't conflict with those set in the tests). Only test_build_reconfig_existing_config actually failed, but I updated a few more in case the defaults changed. --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 14 ++++++++++---- tools/testing/kunit/kunit_tool_test.py | 12 ++++++++++++ 3 files changed, 27 insertions(+), 4 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index fc415ff7530e..127598fb994b 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) kconfig.merge_in_entries(base_kunitconfig) return kconfig @@ -138,6 +139,11 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig + def make_allyesconfig(self, build_dir: str, make_options) -> None: kunit_parser.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -297,7 +303,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -328,7 +334,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index e21ae1331350..08cb2dc8ef7d 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -430,6 +430,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() # Should generate the .config @@ -447,6 +451,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() self.assertTrue(tree.build_reconfig(build_dir, make_options=[])) @@ -463,6 +471,10 @@ class LinuxSourceTreeTest(unittest.TestCase): f.write('CONFIG_KUNIT=y\nCONFIG_KUNIT_TEST=y') tree = kunit_kernel.LinuxSourceTree(build_dir) + # Stub out the source tree operations, so we don't have + # the defaults for any given architecture get in the + # way. + tree._ops = kunit_kernel.LinuxSourceTreeOperations(None, None) mock_build_config = mock.patch.object(tree, 'build_config').start() # ... so we should trigger a call to build_config() -- 2.37.0.rc0.161.g10f37bed90-goog

3 years

3
3
0 0

Re: [PATCH v12 3/4] trace/objtrace: Add testcases for objtrace

by Masami Hiramatsu

Hi, This looks good to me (and I tested). Tested-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> BTW, please use 'selftests/ftrace:' tag instead of (or in addition to) 'trace/objtrace:' for the ftracetest patch. And please Cc to linux-kselftest(a)vger.kernel.org and Shuah Khan. Thank you, On Tue, 7 Jun 2022 00:09:42 +0800 Jeff Xie <xiehuan09(a)gmail.com> wrote: > Add a series of testcases to illustrate correct and incorrect usage of > objtrace trigger. > > Signed-off-by: Jeff Xie <xiehuan09(a)gmail.com> > --- > .../ftrace/test.d/trigger/trigger-objtrace.tc | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > > diff --git a/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > new file mode 100644 > index 000000000000..d894442b6a30 > --- /dev/null > +++ b/tools/testing/selftests/ftrace/test.d/trigger/trigger-objtrace.tc > @@ -0,0 +1,41 @@ > +#!/bin/sh > +# SPDX-License-Identifier: GPL-2.0 > +# description: event trigger - test objtrace-trigger > +# requires: kprobe_events "objtrace":README > + > +fail() { #msg > + echo $1 > + exit_fail > +} > + > +echo 'p bio_add_page arg1=$arg1 arg2=$arg2' > kprobe_events > + > +FEATURE=`grep objtrace events/kprobes/p_bio_add_page_0/trigger` > +if [ -z "$FEATURE" ]; then > + echo "objtrace trigger is not supported" > + exit_unsupported > +fi > + > +echo "Test objtrace trigger" > +echo 'objtrace:add:arg1,0x28:u32:1 if comm == "cat"' > \ > + events/kprobes/p_bio_add_page_0/trigger > +if [ -z $? ]; then > + fail "objtrace trigger syntax error" > +fi > + > +echo "Test objtrace semantic errors" > + > +# Being lack of objtrace command > +! echo 'objtrace:arg1,0x28:u32:1' > events/kprobes/p_bio_add_page_0/trigger > +# Bad parameter name > +! echo 'objtrace:add:argx:u32:1' > events/kprobes/p_bio_add_page_0/trigger > +# The parameter existed on event > +! echo 'objtrace:add:arg2:u32:1' > events/kprobes/p_bio_add_page_0/trigger > + > +echo "reset objtrace trigger" > + > +echo '!objtrace:add:arg1,0x28:u32' > \ > + events/kprobes/p_bio_add_page_0/trigger > +echo '-:p_bio_add_page_0' >> ./kprobe_events > + > +exit 0 > -- > 2.25.1 > -- Masami Hiramatsu (Google) <mhiramat(a)kernel.org>

3 years

3
2
0 0

[PATCH] kselftests/damon: add support for checking secureboot status

by Gautam

The kernel is in lockdown mode when secureboot is enabled and hence debugfs cannot be used. But the error printed after running tests does not indicate this currently: >TAP version 13 >1..6 ># selftests: damon: debugfs_attrs.sh ># cat: /sys/kernel/debug/damon/monitor_on: Operation not permitted ># _debugfs_common.sh: line 48: [: =: unary operator expected ># cat: /sys/kernel/debug/damon/attrs: Operation not permitted ># _debugfs_common.sh: line 11: /sys/kernel/debug/damon/attrs: Operation > not permitted ># writing 1 2 3 4 5 to /sys/kernel/debug/damon/attrs doesn't return 0 ># expected because: valid input ># _debugfs_common.sh: line 16: /sys/kernel/debug/damon/attrs: Operation > not permitted >not ok 1 selftests: damon: debugfs_attrs.sh # exit=1 After adding the check for secureboot, the output is as follows: >TAP version 13 >1..6 ># selftests: damon: debugfs_attrs.sh ># debugfs cannot work with secureboot enabled >not ok 1 selftests: damon: debugfs_attrs.sh # exit=1 Signed-off-by: Gautam <gautammenghani201(a)gmail.com> --- tools/testing/selftests/damon/_chk_dependency.sh | 10 ++++++++++ 1 file changed, 10 insertions(+) mode change 100644 => 100755 tools/testing/selftests/damon/_chk_dependency.sh diff --git a/tools/testing/selftests/damon/_chk_dependency.sh b/tools/testing/selftests/damon/_chk_dependency.sh old mode 100644 new mode 100755 index 0189db81550b..6e45c1fe230e --- a/tools/testing/selftests/damon/_chk_dependency.sh +++ b/tools/testing/selftests/damon/_chk_dependency.sh @@ -26,3 +26,13 @@ do exit 1 fi done + +secureboot_error="Operation not permitted" +for f in attrs target_ids monitor_on +do + status=$( cat "$DBGFS/$f" 2>&1 ) + if [ "${status#*$secureboot_error}" != "$status" ]; then + echo "debugfs cannot work with secureboot enabled" + exit 1 + fi +done -- 2.36.1

3 years

4
9
0 0

[PATCH] kselftests: Enable the echo command to print newlines in Makefile

by Gautam

In the install section of the main Makefile of kselftests, the echo command is used with -n flag, which disables the printing of new line due to which the output contains "\n" chars as follows: Emit Tests for alsa\nSkipping non-existent dir: arm64 Emit Tests for breakpoints\nEmit Tests for capabilities\n This patch fixes the above bug by using the -e flag. Signed-off-by: Gautam <gautammenghani201(a)gmail.com> --- tools/testing/selftests/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index de11992dc577..52e31437f1a3 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -253,7 +253,7 @@ ifdef INSTALL_PATH for TARGET in $(TARGETS); do \ BUILD_TARGET=$$BUILD/$$TARGET; \ [ ! -d $(INSTALL_PATH)/$$TARGET ] && echo "Skipping non-existent dir: $$TARGET" && continue; \ - echo -n "Emit Tests for $$TARGET\n"; \ + echo -ne "Emit Tests for $$TARGET\n"; \ $(MAKE) -s --no-print-directory OUTPUT=$$BUILD_TARGET COLLECTION=$$TARGET \ -C $$TARGET emit_tests >> $(TEST_LIST); \ done; -- 2.36.1

3 years

2
1
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "miliseconds" -> "milliseconds"

by Colin Ian King

There is a spelling mistake in the -p option help text. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c index cc6421716400..58876ec4ee51 100644 --- a/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c +++ b/tools/testing/selftests/kvm/x86_64/nx_huge_pages_test.c @@ -218,7 +218,7 @@ static void help(char *name) puts(""); printf("usage: %s [-h] [-p period_ms] [-t token]\n", name); puts(""); - printf(" -p: The NX reclaim period in miliseconds.\n"); + printf(" -p: The NX reclaim period in milliseconds.\n"); printf(" -t: The magic token to indicate environment setup is done.\n"); printf(" -r: The test has reboot permissions and can disable NX huge pages.\n"); puts(""); -- 2.35.3

3 years

1
0
0 0

[Bug Report] - kselftest build fails if output directory is first level sub-directory

by Muhammad Usama Anjum

Hello, kselftest can be built using the kernel's top most Makefile without using kselftest's Makefile directly. But there is bug in the top most Makefile. The build fails if the specified output directory is first level sub-directory. Here is a example to reproduce this bug: make kselftest-all O=build "The Make is working in a wrong directory, that is why the relative path does not work." Masahiro Yamada. Feel free to fix it if someone pin the bug. It should be noted that the build works in some other combinations: make kselftest-all (works) make kselftest-all O=/tmp (works) make kselftest-all O=build/build2 (works) My unsuccessful attempt to fix this bug can be found here: https://lore.kernel.org/lkml/20220223191016.1658728-1-usama.anjum@collabora… Thanks, Muhammad Usama Anjum

3 years

3
5
0 0

[PATCH v2] kunit: tool: refactor internal kconfig handling, allow overriding

by Daniel Latypov

Currently, you cannot ovewrwrite what's in your kunitconfig via --kconfig_add. Nor can you override something in a qemu_config via either means. This patch makes it so we have this level of priority * --kconfig_add * kunitconfig file (the default or the one from --kunitconfig) * qemu_config The rationale for this order is that the more "dynamic" sources of kconfig options should take priority. --kconfig_add is obviously the most dynamic. And for kunitconfig, users probably tweak the file manually or specify --kunitconfig more often than they delve into qemu_config python files. And internally, we convert the kconfigs from a python list into a set or dict fairly often. We should just use a dict internally. We exposed the set transform in the past since we didn't define __eq__, so also take the chance to shore up the kunit_kconfig.Kconfig interface. Example ======= Let's consider the unrealistic example where someone would want to disable CONFIG_KUNIT. I.e. they run $ ./tools/testing/kunit/kunit.py config --kconfig_add=CONFIG_KUNIT=n Before ------ We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: # CONFIG_KUNIT is not set After ----- We'd write the following > # CONFIG_KUNIT is not set > CONFIG_KUNIT_TEST=y > CONFIG_KUNIT_ALL_TESTS=y > CONFIG_KUNIT_EXAMPLE_TEST=y And we'd error out with > ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. > This is probably due to unsatisfied dependencies. > Missing: CONFIG_KUNIT_EXAMPLE_TEST=y, CONFIG_KUNIT_TEST=y, CONFIG_KUNIT_ALL_TESTS=y Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- v1 -> v2: fix validate_config() func. There was a bug found by David, see https://lore.kernel.org/linux-kselftest/CAGS_qxpF338dvbB+6QW1n8_agddeS10+nk… --- tools/testing/kunit/kunit_config.py | 49 +++++++++++++++----------- tools/testing/kunit/kunit_kernel.py | 18 +++++----- tools/testing/kunit/kunit_tool_test.py | 45 ++++++++++------------- 3 files changed, 57 insertions(+), 55 deletions(-) diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 75a8dc1683d4..89443400b17e 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import List, Set +from typing import Dict, Iterable, Set CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -32,35 +32,46 @@ class Kconfig: """Represents defconfig or .config specified using the Kconfig language.""" def __init__(self) -> None: - self._entries = [] # type: List[KconfigEntry] + self._entries = {} # type: Dict[str, str] - def entries(self) -> Set[KconfigEntry]: - return set(self._entries) + def __eq__(self, other) -> bool: + if not isinstance(other, self.__class__): + return False + return self._entries == other._entries - def add_entry(self, entry: KconfigEntry) -> None: - self._entries.append(entry) + def __repr__(self) -> str: + return ','.join(str(e) for e in self._as_entries()) + + + def _as_entries(self) -> Iterable[KconfigEntry]: + for name, value in self._entries.items(): + yield KconfigEntry(name, value) + + def add_entry(self, name: str, value: str) -> None: + self._entries[name] = value def is_subset_of(self, other: 'Kconfig') -> bool: - other_dict = {e.name: e.value for e in other.entries()} - for a in self.entries(): - b = other_dict.get(a.name) + for name, value in self._entries.items(): + b = other._entries.get(name) if b is None: - if a.value == 'n': + if value == 'n': continue return False - if a.value != b: + if value != b: return False return True + def set_diff(self, other: 'Kconfig') -> Set[KconfigEntry]: + return set(self._as_entries()) - set(other._as_entries()) + def merge_in_entries(self, other: 'Kconfig') -> None: - if other.is_subset_of(self): - return - self._entries = list(self.entries().union(other.entries())) + for name, value in other._entries.items(): + self._entries[name] = value def write_to_file(self, path: str) -> None: with open(path, 'a+') as f: - for entry in self.entries(): - f.write(str(entry) + '\n') + for e in self._as_entries(): + f.write(str(e) + '\n') def parse_file(path: str) -> Kconfig: with open(path, 'r') as f: @@ -78,14 +89,12 @@ def parse_from_string(blob: str) -> Kconfig: match = config_matcher.match(line) if match: - entry = KconfigEntry(match.group(1), match.group(2)) - kconfig.add_entry(entry) + kconfig.add_entry(match.group(1), match.group(2)) continue empty_match = is_not_set_matcher.match(line) if empty_match: - entry = KconfigEntry(empty_match.group(1), 'n') - kconfig.add_entry(entry) + kconfig.add_entry(empty_match.group(1), 'n') continue if line[0] == '#': diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..6d994bb24999 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -53,8 +53,8 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: - pass + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: + return base_kunitconfig def make_allyesconfig(self, build_dir: str, make_options) -> None: raise ConfigError('Only the "um" arch is supported for alltests') @@ -109,9 +109,10 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> kunit_config.Kconfig: kconfig = kunit_config.parse_from_string(self._kconfig) - base_kunitconfig.merge_in_entries(kconfig) + kconfig.merge_in_entries(base_kunitconfig) + return kconfig def start(self, params: List[str], build_dir: str) -> subprocess.Popen: kernel_path = os.path.join(build_dir, self._kernel_path) @@ -267,7 +268,7 @@ class LinuxSourceTree: validated_kconfig = kunit_config.parse_file(kconfig_path) if self._kconfig.is_subset_of(validated_kconfig): return True - invalid = self._kconfig.entries() - validated_kconfig.entries() + invalid = self._kconfig.set_diff(validated_kconfig) message = 'Not all Kconfig options selected in kunitconfig were in the generated .config.\n' \ 'This is probably due to unsatisfied dependencies.\n' \ 'Missing: ' + ', '.join([str(e) for e in invalid]) @@ -282,7 +283,7 @@ class LinuxSourceTree: if build_dir and not os.path.exists(build_dir): os.mkdir(build_dir) try: - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) self._kconfig.write_to_file(kconfig_path) self._ops.make_olddefconfig(build_dir, make_options) except ConfigError as e: @@ -303,7 +304,7 @@ class LinuxSourceTree: return True old_kconfig = kunit_config.parse_file(old_path) - return old_kconfig.entries() != self._kconfig.entries() + return old_kconfig != self._kconfig def build_reconfig(self, build_dir: str, make_options) -> bool: """Creates a new .config if it is not a subset of the .kunitconfig.""" @@ -313,7 +314,8 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._ops.make_arch_qemuconfig(self._kconfig) + self._kconfig = self._ops.make_arch_qemuconfig(self._kconfig) + if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True print('Regenerating .config ...') diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 25a2eb3bf114..3a8f638ff092 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -45,7 +45,7 @@ class KconfigTest(unittest.TestCase): self.assertTrue(kconfig0.is_subset_of(kconfig0)) kconfig1 = kunit_config.Kconfig() - kconfig1.add_entry(kunit_config.KconfigEntry('TEST', 'y')) + kconfig1.add_entry('TEST', 'y') self.assertTrue(kconfig1.is_subset_of(kconfig1)) self.assertTrue(kconfig0.is_subset_of(kconfig1)) self.assertFalse(kconfig1.is_subset_of(kconfig0)) @@ -56,40 +56,28 @@ class KconfigTest(unittest.TestCase): kconfig = kunit_config.parse_file(kconfig_path) expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) - - self.assertEqual(kconfig.entries(), expected_kconfig.entries()) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') + + self.assertEqual(kconfig, expected_kconfig) def test_write_to_file(self): kconfig_path = os.path.join(test_tmpdir, '.config') expected_kconfig = kunit_config.Kconfig() - expected_kconfig.add_entry( - kunit_config.KconfigEntry('UML', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MMU', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('EXAMPLE_TEST', 'y')) - expected_kconfig.add_entry( - kunit_config.KconfigEntry('MK8', 'n')) + expected_kconfig.add_entry('UML', 'y') + expected_kconfig.add_entry('MMU', 'y') + expected_kconfig.add_entry('TEST', 'y') + expected_kconfig.add_entry('EXAMPLE_TEST', 'y') + expected_kconfig.add_entry('MK8', 'n') expected_kconfig.write_to_file(kconfig_path) actual_kconfig = kunit_config.parse_file(kconfig_path) - - self.assertEqual(actual_kconfig.entries(), - expected_kconfig.entries()) + self.assertEqual(actual_kconfig, expected_kconfig) class KUnitParserTest(unittest.TestCase): @@ -381,8 +369,11 @@ class LinuxSourceTreeTest(unittest.TestCase): kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) def test_kconfig_add(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('NOT_REAL', 'y') + tree = kunit_kernel.LinuxSourceTree('', kconfig_add=['CONFIG_NOT_REAL=y']) - self.assertIn(kunit_config.KconfigEntry('NOT_REAL', 'y'), tree._kconfig.entries()) + self.assertFalse(want_kconfig.set_diff(tree._kconfig)) def test_invalid_arch(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'not a valid arch, options are.*x86_64'): base-commit: 1b11063d32d7e11366e48be64215ff517ce32217 -- 2.36.1.124.g0e6072fb45-goog

3 years

2
3
0 0

[PATCH v2] docs/kselftest: add more guidelines for adding new tests

by Muhammad Usama Anjum

Improve and add instructions to add new tests. Add build commands to test before sending the new test patch. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes in v2: - Updated commit message - Removed dependence of this patch from other patch - Updated instructions --- Documentation/dev-tools/kselftest.rst | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index a833ecf12fbc1..ee6467ca8293f 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -208,6 +208,14 @@ In general, the rules for selftests are Contributing new tests (details) ================================ + * In your Makefile, use facilities from lib.mk by including it instead of + reinventing the wheel. Specify flags and binaries generation flags on + need basis before including lib.mk. :: + + CFLAGS = $(KHDR_INCLUDES) + TEST_GEN_PROGS := close_range_test + include ../lib.mk + * Use TEST_GEN_XXX if such binaries or files are generated during compiling. @@ -230,13 +238,30 @@ Contributing new tests (details) * First use the headers inside the kernel source and/or git repo, and then the system headers. Headers for the kernel release as opposed to headers installed by the distro on the system should be the primary focus to be able - to find regressions. + to find regressions. Use KHDR_INCLUDES in Makefile to include headers from + the kernel source. * If a test needs specific kernel config options enabled, add a config file in the test directory to enable them. e.g: tools/testing/selftests/android/config + * Create a .gitignore file inside test directory and add all generated objects + in it. + + * Add new test name in TARGETS in selftests/Makefile:: + + TARGETS += android + + * All changes should pass:: + + kselftest-{all,install,clean,gen_tar} + kselftest-{all,install,clean,gen_tar} O=abo_path + kselftest-{all,install,clean,gen_tar} O=rel_path + make -C tools/testing/selftests {all,install,clean,gen_tar} + make -C tools/testing/selftests {all,install,clean,gen_tar} O=abs_path + make -C tools/testing/selftests {all,install,clean,gen_tar} O=rel_path + Test Module =========== -- 2.30.2

3 years

3
6
0 0

[PATCH] tc-testing: gitignore, delete plugins directory

by liujing

when we modfying kernel, commit it to our environment building. we find a error that is "tools/testing/selftests/tc-testing/plugins" failed: No such file or directory" we find plugins directory is ignored in "tools/testing/selftests/tc-testing/.gitignore", but the plugins directory is need in "tools/testing/selftests/tc-testing/Makefile" Signed-off-by: liujing <liujing(a)cmss.chinamobile.com> --- tools/testing/selftests/tc-testing/.gitignore | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/tc-testing/.gitignore b/tools/testing/selftests/tc-testing/.gitignore index d52f65de23b4..9fe1cef72728 100644 --- a/tools/testing/selftests/tc-testing/.gitignore +++ b/tools/testing/selftests/tc-testing/.gitignore @@ -1,7 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only __pycache__/ *.pyc -plugins/ *.xml *.tap tdc_config_local.py -- 2.18.2

3 years

2
1
0 0

[PATCH v7 0/6] Proposal for a GPU cgroup controller

by T.J. Mercier

This patch series revisits the proposal for a GPU cgroup controller to track and limit memory allocations by various device/allocator subsystems. The patch series also contains a simple prototype to illustrate how Android intends to implement DMA-BUF allocator attribution using the GPU cgroup controller. The prototype does not include resource limit enforcements. Changelog: v7: Hide gpucg and gpucg_bucket struct definitions per Michal Koutný. This means gpucg_register_bucket now returns an internally allocated struct gpucg_bucket. Move all public function documentation to the cgroup_gpu.h header. Remove comment in documentation about duplicate name rejection which is not relevant to cgroups users per Michal Koutný. v6: Move documentation into cgroup-v2.rst per Tejun Heo. Rename BINDER_FD{A}_FLAG_SENDER_NO_NEED -> BINDER_FD{A}_FLAG_XFER_CHARGE per Carlos Llamas. Return error on transfer failure per Carlos Llamas. v5: Rebase on top of v5.18-rc3 Drop the global GPU cgroup "total" (sum of all device totals) portion of the design since there is no currently known use for this per Tejun Heo. Fix commit message which still contained the old name for dma_buf_transfer_charge per Michal Koutný. Remove all GPU cgroup code except what's necessary to support charge transfer from dma_buf. Previously charging was done in export, but for non-Android graphics use-cases this is not ideal since there may be a delay between allocation and export, during which time there is no accounting. Merge dmabuf: Use the GPU cgroup charge/uncharge APIs patch into dmabuf: heaps: export system_heap buffers with GPU cgroup charging as a result of above. Put the charge and uncharge code in the same file (system_heap_allocate, system_heap_dma_buf_release) instead of splitting them between the heap and the dma_buf_release. This avoids asymmetric management of the gpucg charges. Modify the dma_buf_transfer_charge API to accept a task_struct instead of a gpucg. This avoids requiring the caller to manage the refcount of the gpucg upon failure and confusing ownership transfer logic. Support all strings for gpucg_register_bucket instead of just string literals. Enforce globally unique gpucg_bucket names. Constrain gpucg_bucket name lengths to 64 bytes. Append "-heap" to gpucg_bucket names from dmabuf-heaps. Drop patch 7 from the series, which changed the types of binder_transaction_data's sender_pid and sender_euid fields. This was done in another commit here: https://lore.kernel.org/all/20220210021129.3386083-4-masahiroy@kernel.org/ Rename: gpucg_try_charge -> gpucg_charge find_cg_rpool_locked -> cg_rpool_find_locked init_cg_rpool -> cg_rpool_init get_cg_rpool_locked -> cg_rpool_get_locked "gpu cgroup controller" -> "GPU controller" gpucg_device -> gpucg_bucket usage -> size Tests: Support both binder_fd_array_object and binder_fd_object. This is necessary because new versions of Android will use binder_fd_object instead of binder_fd_array_object, and we need to support both. Tests for both binder_fd_array_object and binder_fd_object. For binder_utils return error codes instead of struct binder{fs}_ctx. Use ifdef __ANDROID__ to choose platform-dependent temp path instead of a runtime fallback. Ensure binderfs_mntpt ends with a trailing '/' character instead of prepending it where used. v4: Skip test if not run as root per Shuah Khan Add better test logging for abnormal child termination per Shuah Khan Adjust ordering of charge/uncharge during transfer to avoid potentially hitting cgroup limit per Michal Koutný Adjust gpucg_try_charge critical section for charge transfer functionality Fix uninitialized return code error for dmabuf_try_charge error case v3: Remove Upstreaming Plan from gpu-cgroup.rst per John Stultz Use more common dual author commit message format per John Stultz Remove android from binder changes title per Todd Kjos Add a kselftest for this new behavior per Greg Kroah-Hartman Include details on behavior for all combinations of kernel/userspace versions in changelog (thanks Suren Baghdasaryan) per Greg Kroah-Hartman. Fix pid and uid types in binder UAPI header v2: See the previous revision of this change submitted by Hridya Valsaraju at: https://lore.kernel.org/all/20220115010622.3185921-1-hridya@google.com/ Move dma-buf cgroup charge transfer from a dma_buf_op defined by every heap to a single dma-buf function for all heaps per Daniel Vetter and Christian König. Pointers to struct gpucg and struct gpucg_device tracking the current associations were added to the dma_buf struct to achieve this. Fix incorrect Kconfig help section indentation per Randy Dunlap. History of the GPU cgroup controller ==================================== The GPU/DRM cgroup controller came into being when a consensus[1] was reached that the resources it tracked were unsuitable to be integrated into memcg. Originally, the proposed controller was specific to the DRM subsystem and was intended to track GEM buffers and GPU-specific resources[2]. In order to help establish a unified memory accounting model for all GPU and all related subsystems, Daniel Vetter put forth a suggestion to move it out of the DRM subsystem so that it can be used by other DMA-BUF exporters as well[3]. This RFC proposes an interface that does the same. [1]: https://patchwork.kernel.org/project/dri-devel/cover/20190501140438.9506-1-… [2]: https://lore.kernel.org/amd-gfx/20210126214626.16260-1-brian.welty@intel.co… [3]: https://lore.kernel.org/amd-gfx/YCVOl8%2F87bqRSQei@phenom.ffwll.local/ Hridya Valsaraju (3): gpu: rfc: Proposal for a GPU cgroup controller cgroup: gpu: Add a cgroup controller for allocator attribution of GPU memory binder: Add flags to relinquish ownership of fds T.J. Mercier (3): dmabuf: heaps: export system_heap buffers with GPU cgroup charging dmabuf: Add gpu cgroup charge transfer function selftests: Add binder cgroup gpu memory transfer tests Documentation/admin-guide/cgroup-v2.rst | 23 + drivers/android/binder.c | 31 +- drivers/dma-buf/dma-buf.c | 80 ++- drivers/dma-buf/dma-heap.c | 38 ++ drivers/dma-buf/heaps/system_heap.c | 28 +- include/linux/cgroup_gpu.h | 146 +++++ include/linux/cgroup_subsys.h | 4 + include/linux/dma-buf.h | 49 +- include/linux/dma-heap.h | 15 + include/uapi/linux/android/binder.h | 23 +- init/Kconfig | 7 + kernel/cgroup/Makefile | 1 + kernel/cgroup/gpu.c | 390 +++++++++++++ .../selftests/drivers/android/binder/Makefile | 8 + .../drivers/android/binder/binder_util.c | 250 +++++++++ .../drivers/android/binder/binder_util.h | 32 ++ .../selftests/drivers/android/binder/config | 4 + .../binder/test_dmabuf_cgroup_transfer.c | 526 ++++++++++++++++++ 18 files changed, 1632 insertions(+), 23 deletions(-) create mode 100644 include/linux/cgroup_gpu.h create mode 100644 kernel/cgroup/gpu.c create mode 100644 tools/testing/selftests/drivers/android/binder/Makefile create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.c create mode 100644 tools/testing/selftests/drivers/android/binder/binder_util.h create mode 100644 tools/testing/selftests/drivers/android/binder/config create mode 100644 tools/testing/selftests/drivers/android/binder/test_dmabuf_cgroup_transfer.c -- 2.36.0.512.ge40c2bad7a-goog

3 years

7
19
0 0

[PATCH v5 0/5] bpf: Add bpf_verify_pkcs7_signature() helper

by Roberto Sassu

One of the desirable features in security is the ability to restrict import of data to a given system based on data authenticity. If data import can be restricted, it would be possible to enforce a system-wide policy based on the signing keys the system owner trusts. This feature is widely used in the kernel. For example, if the restriction is enabled, kernel modules can be plugged in only if they are signed with a key whose public part is in the primary or secondary keyring. For eBPF, it can be useful as well. For example, it might be useful to authenticate data an eBPF program makes security decisions on. After a discussion in the eBPF mailing list, it was decided that the stated goal should be accomplished by introducing a new helper: bpf_verify_pkcs7_signature(), dedicated to verify PKCS#7 signatures. More helpers will be introduced later, as necessary. The job of bpf_verify_pkcs7_signature() is simply to call the corresponding signature verification function verify_pkcs7_signature(). Data and signature can be provided to the new helper with two dynamic pointers, to reduce the number of parameters. The keyring can be provided from its serial number, with the new helper bpf_lookup_user_key(). Since it acquires a reference of the found key, the corresponding release helper bpf_key_put() has been introduced to decrement the reference count. The eBPF verifier has been enhanced to ensure that the key reference count is always decreased, when incremented, or otherwise it refuses to load the program. This ability is being verified with the lookup_user_key_norelease test. While the new helpers provide great flexibility, they seem to be suboptimal in terms of security guarantees. If the goal is to do signature verification with system-provided keys (e.g. from the built-in keyring), the eBPF program would have to rely on the user space counterpart to search the correct keyring and to pass its serial. If only the eBPF program is signed and verified, there is not certainty that this operation is done correctly by unverified code. Instead, since verify_pkcs7_signature() understands a pre-determined set of struct key pointer values, which translates into the corresponding system keyrings, the keyring ID parameter has been added as well to the eBPF helper. It is considered only if the passed struct key pointer is NULL. That would guaranteed, assuming that the keyring ID is hardcoded, that signature verification is always done with the desired keys. The introduced helpers can be called only from sleepable programs, because of memory allocation (with key flag KEY_LOOKUP_CREATE) and crypto operations. For example, the lsm.s/bpf attach point is suitable, fexit/array_map_update_elem is not. A test was added to check the ability of bpf_verify_pkcs7_signature() to verify PKCS#7 signatures from the session keyring, a newly-created keyring, and from the secondary keyring (taking an existing kernel module for the verification). The test does not fail if a suitable kernel module is not found (needs support from the CI). The patch set is organized as follows. Patch 1 exports bpf_dynptr_get_size(), to obtain the real size of data carried by a dynamic pointer. Patch 2 introduces the bpf_lookup_user_key() and bpf_key_put() helpers. Patch 3 introduces the bpf_verify_pkcs7_signature() helper. Patches 4 and 5 respectively add the test for the first and the last helper. Changelog v4: - Remove bpf_request_key_by_id(), don't return an invalid pointer that other helpers can use - Pass the keyring ID (without ULONG_MAX, suggested by Alexei) to bpf_verify_pkcs7_signature() - Introduce bpf_lookup_user_key() and bpf_key_put() helpers (suggested by Alexei) - Add lookup_key_norelease test, to ensure that the verifier blocks eBPF programs which don't decrement the key reference count - Parse raw PKCS#7 signature instead of module-style signature in the verify_pkcs7_signature test (suggested by Alexei) - Parse kernel module in user space and pass raw PKCS#7 signature to the eBPF program for signature verification v3: - Rename bpf_verify_signature() back to bpf_verify_pkcs7_signature() to avoid managing different parameters for each signature verification function in one helper (suggested by Daniel) - Use dynamic pointers and export bpf_dynptr_get_size() (suggested by Alexei) - Introduce bpf_request_key_by_id() to give more flexibility to the caller of bpf_verify_pkcs7_signature() to retrieve the appropriate keyring (suggested by Alexei) - Fix test by reordering the gcc command line, always compile sign-file - Improve helper support check mechanism in the test v2: - Rename bpf_verify_pkcs7_signature() to a more generic bpf_verify_signature() and pass the signature type (suggested by KP) - Move the helper and prototype declaration under #ifdef so that user space can probe for support for the helper (suggested by Daniel) - Describe better the keyring types (suggested by Daniel) - Include linux/bpf.h instead of vmlinux.h to avoid implicit or redeclaration - Make the test selfcontained (suggested by Alexei) v1: - Don't define new map flag but introduce simple wrapper of verify_pkcs7_signature() (suggested by Alexei and KP) Roberto Sassu (5): bpf: Export bpf_dynptr_get_size() bpf: Add bpf_lookup_user_key() and bpf_key_put() helpers bpf: Add bpf_verify_pkcs7_signature() helper selftests/bpf: Add test for unreleased key references selftests/bpf: Add test for bpf_verify_pkcs7_signature() helper include/linux/bpf.h | 1 + include/uapi/linux/bpf.h | 33 ++ kernel/bpf/bpf_lsm.c | 85 +++++ kernel/bpf/helpers.c | 2 +- kernel/bpf/verifier.c | 6 +- scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 33 ++ tools/testing/selftests/bpf/Makefile | 14 +- tools/testing/selftests/bpf/config | 2 + .../prog_tests/lookup_user_key_norelease.c | 52 +++ .../bpf/prog_tests/verify_pkcs7_sig.c | 341 ++++++++++++++++++ .../progs/test_lookup_user_key_norelease.c | 24 ++ .../bpf/progs/test_verify_pkcs7_sig.c | 90 +++++ .../testing/selftests/bpf/verify_sig_setup.sh | 104 ++++++ 14 files changed, 783 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/lookup_user_key_norelease.c create mode 100644 tools/testing/selftests/bpf/prog_tests/verify_pkcs7_sig.c create mode 100644 tools/testing/selftests/bpf/progs/test_lookup_user_key_norelease.c create mode 100644 tools/testing/selftests/bpf/progs/test_verify_pkcs7_sig.c create mode 100755 tools/testing/selftests/bpf/verify_sig_setup.sh -- 2.25.1

3 years

3
21
0 0

[PATCH 1/2] kunit: tool: make --kunitconfig repeatable, blindly concat

by Daniel Latypov

It's come up a few times that it would be useful to have --kunitconfig be repeatable [1][2]. This could be done before with a bit of shell-fu, e.g. $ find fs/ -name '.kunitconfig' -exec cat {} + | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin or equivalently: $ cat fs/ext4/.kunitconfig fs/fat/.kunitconfig | \ ./tools/testing/kunit/kunit.py run --kunitconfig=/dev/stdin But this can be fairly clunky to use in practice. And having explicit support in kunit.py opens the door to having more config fragments of interest, e.g. options for PCI on UML [1], UML coverage [2], variants of tests [3]. There's another argument to be made that users can just use multiple --kconfig_add's, but this gets very clunky very fast (e.g. [2]). Note: there's a big caveat here that some kconfig options might be incompatible. We try to give a clearish error message in the simple case where the same option appears multiple times with conflicting values, but more subtle ones (e.g. mutually exclusive options) will be potentially very confusing for the user. I don't know we can do better. Note 2: if you want to combine a --kunitconfig with the default, you either have to do to specify the current build_dir > --kunitconfig=.kunit --kunitconfig=additional.config or > --kunitconfig=tools/testing/kunit/configs/default.config --kunitconifg=additional.config each of which have their downsides (former depends on --build_dir, doesn't work if you don't have a .kunitconfig yet), etc. Example with conflicting values: > $ ./tools/testing/kunit/kunit.py config --kunitconfig=lib/kunit --kunitconfig=/dev/stdin <<EOF > CONFIG_KUNIT_TEST=n > CONFIG_KUNIT=m > EOF > ... > kunit_kernel.ConfigError: Multiple values specified for 2 options in kunitconfig: > CONFIG_KUNIT=y > vs from /dev/stdin > CONFIG_KUNIT=m > > CONFIG_KUNIT_TEST=y > vs from /dev/stdin > # CONFIG_KUNIT_TEST is not set [1] https://lists.freedesktop.org/archives/dri-devel/2022-June/357616.html [2] https://lore.kernel.org/linux-kselftest/CAFd5g45f3X3xF2vz2BkTHRqOC4uW6GZxtU… [3] https://lore.kernel.org/linux-kselftest/CANpmjNOdSy6DuO6CYZ4UxhGxqhjzx4tn0s… Signed-off-by: Daniel Latypov <dlatypov(a)google.com> --- NOTE: this series is based on https://lore.kernel.org/linux-kselftest/20220520224200.3764027-1-dlatypov@g… That patch redoes kunitconfig parsing, so we'd have merge conflicts either way we order these. --- tools/testing/kunit/kunit.py | 13 ++++--- tools/testing/kunit/kunit_config.py | 11 +++++- tools/testing/kunit/kunit_kernel.py | 38 ++++++++++++------ tools/testing/kunit/kunit_tool_test.py | 54 +++++++++++++++++++++++--- 4 files changed, 91 insertions(+), 25 deletions(-) diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py index 13bd72e47da8..163f6b8ac464 100755 --- a/tools/testing/kunit/kunit.py +++ b/tools/testing/kunit/kunit.py @@ -291,8 +291,9 @@ def add_common_opts(parser) -> None: parser.add_argument('--kunitconfig', help='Path to Kconfig fragment that enables KUnit tests.' ' If given a directory, (e.g. lib/kunit), "/.kunitconfig" ' - 'will get automatically appended.', - metavar='PATH') + 'will get automatically appended. If repeated, the files ' + 'blindly concatenated, which might not work in all cases.', + action='append', metavar='PATHS') parser.add_argument('--kconfig_add', help='Additional Kconfig options to append to the ' '.kunitconfig, e.g. CONFIG_KASAN=y. Can be repeated.', @@ -414,7 +415,7 @@ def main(argv, linux=None): if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -440,7 +441,7 @@ def main(argv, linux=None): if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -457,7 +458,7 @@ def main(argv, linux=None): elif cli_args.subcommand == 'build': if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, @@ -476,7 +477,7 @@ def main(argv, linux=None): elif cli_args.subcommand == 'exec': if not linux: linux = kunit_kernel.LinuxSourceTree(cli_args.build_dir, - kunitconfig_path=cli_args.kunitconfig, + kunitconfig_paths=cli_args.kunitconfig, kconfig_add=cli_args.kconfig_add, arch=cli_args.arch, cross_compile=cli_args.cross_compile, diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py index 89443400b17e..05b129030c6e 100644 --- a/tools/testing/kunit/kunit_config.py +++ b/tools/testing/kunit/kunit_config.py @@ -8,7 +8,7 @@ from dataclasses import dataclass import re -from typing import Dict, Iterable, Set +from typing import Dict, Iterable, List, Set, Tuple CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$' CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$' @@ -64,6 +64,15 @@ class Kconfig: def set_diff(self, other: 'Kconfig') -> Set[KconfigEntry]: return set(self._as_entries()) - set(other._as_entries()) + def differing_options(self, other: 'Kconfig') -> List[Tuple[KconfigEntry, KconfigEntry]]: + diff = [] # type: List[Tuple[KconfigEntry, KconfigEntry]] + for name, value in self._entries.items(): + b = other._entries.get(name) + if b and value != b: + pair = (KconfigEntry(name, value), KconfigEntry(name, b)) + diff.append(pair) + return diff + def merge_in_entries(self, other: 'Kconfig') -> None: for name, value in other._entries.items(): self._entries[name] = value diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 6d994bb24999..fc415ff7530e 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -176,6 +176,30 @@ def get_kunitconfig_path(build_dir: str) -> str: def get_old_kunitconfig_path(build_dir: str) -> str: return os.path.join(build_dir, OLD_KUNITCONFIG_PATH) +def get_parsed_kunitconfig(build_dir: str, + kunitconfig_paths: Optional[List[str]]=None) -> kunit_config.Kconfig: + if not kunitconfig_paths: + path = get_kunitconfig_path(build_dir) + if not os.path.exists(path): + shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, path) + return kunit_config.parse_file(path) + + merged = kunit_config.Kconfig() + + for path in kunitconfig_paths: + if os.path.isdir(path): + path = os.path.join(path, KUNITCONFIG_PATH) + if not os.path.exists(path): + raise ConfigError(f'Specified kunitconfig ({path}) does not exist') + + partial = kunit_config.parse_file(path) + diff = merged.differing_options(partial) + if diff: + diff_str = '\n\n'.join(f'{a}\n vs from {path}\n{b}' for a, b in diff) + raise ConfigError(f'Multiple values specified for {len(diff)} options in kunitconfig:\n{diff_str}') + merged.merge_in_entries(partial) + return merged + def get_outfile_path(build_dir: str) -> str: return os.path.join(build_dir, OUTFILE_PATH) @@ -221,7 +245,7 @@ class LinuxSourceTree: self, build_dir: str, load_config=True, - kunitconfig_path='', + kunitconfig_paths: Optional[List[str]]=None, kconfig_add: Optional[List[str]]=None, arch=None, cross_compile=None, @@ -237,17 +261,7 @@ class LinuxSourceTree: if not load_config: return - if kunitconfig_path: - if os.path.isdir(kunitconfig_path): - kunitconfig_path = os.path.join(kunitconfig_path, KUNITCONFIG_PATH) - if not os.path.exists(kunitconfig_path): - raise ConfigError(f'Specified kunitconfig ({kunitconfig_path}) does not exist') - else: - kunitconfig_path = get_kunitconfig_path(build_dir) - if not os.path.exists(kunitconfig_path): - shutil.copyfile(DEFAULT_KUNITCONFIG_PATH, kunitconfig_path) - - self._kconfig = kunit_config.parse_file(kunitconfig_path) + self._kconfig = get_parsed_kunitconfig(build_dir, kunitconfig_paths) if kconfig_add: kconfig = kunit_config.parse_from_string('\n'.join(kconfig_add)) self._kconfig.merge_in_entries(kconfig) diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 3a8f638ff092..e21ae1331350 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -356,17 +356,46 @@ class LinuxSourceTreeTest(unittest.TestCase): def test_invalid_kunitconfig(self): with self.assertRaisesRegex(kunit_kernel.ConfigError, 'nonexistent.* does not exist'): - kunit_kernel.LinuxSourceTree('', kunitconfig_path='/nonexistent_file') + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=['/nonexistent_file']) def test_valid_kunitconfig(self): with tempfile.NamedTemporaryFile('wt') as kunitconfig: - kunit_kernel.LinuxSourceTree('', kunitconfig_path=kunitconfig.name) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[kunitconfig.name]) def test_dir_kunitconfig(self): with tempfile.TemporaryDirectory('') as dir: with open(os.path.join(dir, '.kunitconfig'), 'w'): pass - kunit_kernel.LinuxSourceTree('', kunitconfig_path=dir) + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir]) + + def test_multiple_kunitconfig(self): + want_kconfig = kunit_config.Kconfig() + want_kconfig.add_entry('KUNIT', 'y') + want_kconfig.add_entry('KUNIT_TEST', 'm') + + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT_TEST=m') + pass + + tree = kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + self.assertFalse(want_kconfig.set_diff(tree._kconfig)) + + + def test_multiple_kunitconfig_invalid(self): + with tempfile.TemporaryDirectory('') as dir: + other = os.path.join(dir, 'otherkunitconfig') + with open(os.path.join(dir, '.kunitconfig'), 'w') as f: + f.write('CONFIG_KUNIT=y') + with open(other, 'w') as f: + f.write('CONFIG_KUNIT=m') + + with self.assertRaisesRegex(kunit_kernel.ConfigError, '(?s)Multiple values.*CONFIG_KUNIT'): + kunit_kernel.LinuxSourceTree('', kunitconfig_paths=[dir, other]) + def test_kconfig_add(self): want_kconfig = kunit_config.Kconfig() @@ -637,7 +666,7 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['run', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, @@ -649,19 +678,32 @@ class KUnitMainTest(unittest.TestCase): kunit.main(['config', '--kunitconfig=mykunitconfig']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path='mykunitconfig', + kunitconfig_paths=['mykunitconfig'], kconfig_add=None, arch='um', cross_compile=None, qemu_config_path=None) + @mock.patch.object(kunit_kernel, 'LinuxSourceTree') + def test_run_multiple_kunitconfig(self, mock_linux_init): + mock_linux_init.return_value = self.linux_source_mock + kunit.main(['run', '--kunitconfig=mykunitconfig', '--kunitconfig=other']) + # Just verify that we parsed and initialized it correctly here. + mock_linux_init.assert_called_once_with('.kunit', + kunitconfig_paths=['mykunitconfig', 'other'], + kconfig_add=None, + arch='um', + cross_compile=None, + qemu_config_path=None) + + @mock.patch.object(kunit_kernel, 'LinuxSourceTree') def test_run_kconfig_add(self, mock_linux_init): mock_linux_init.return_value = self.linux_source_mock kunit.main(['run', '--kconfig_add=CONFIG_KASAN=y', '--kconfig_add=CONFIG_KCSAN=y']) # Just verify that we parsed and initialized it correctly here. mock_linux_init.assert_called_once_with('.kunit', - kunitconfig_path=None, + kunitconfig_paths=None, kconfig_add=['CONFIG_KASAN=y', 'CONFIG_KCSAN=y'], arch='um', cross_compile=None, -- 2.37.0.rc0.104.g0611611a94-goog

3 years

3
5
0 0

[RFC PATCH 0/2] efi: get rid of deprecated sysfs varstore interface

by Ard Biesheuvel

EFI still has two ways of exposing EFI variable to user space: the original sysfs interface and the efivarfs pseudo-filesystem that supersedes it, and which was introduced almost 10 years ago. As a preparatory step towards refactoring the underlying infrastructure shared between efivarfs and efi-pstore, I would like to finally get rid of the sysfs interface which also uses that, but which is only enabled on x86 and Itanium. Cc: Matthew Garrett <mjg59(a)srcf.ucam.org> Cc: Peter Jones <pjones(a)redhat.com> Cc: Tony Luck <tony.luck(a)intel.com> Cc: Kees Cook <keescook(a)chromium.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: linux-kselftest(a)vger.kernel.org Ard Biesheuvel (2): selftests/kexec: remove broken EFI_VARS secure boot fallback check efi: remove deprecated 'efivars' sysfs interface Documentation/x86/x86_64/uefi.rst | 2 +- arch/arm/configs/milbeaut_m10v_defconfig | 1 - arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/generic_defconfig | 1 - arch/ia64/configs/gensparse_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/x86/configs/i386_defconfig | 1 - arch/x86/configs/x86_64_defconfig | 1 - drivers/firmware/efi/Kconfig | 12 - drivers/firmware/efi/Makefile | 1 - drivers/firmware/efi/efivars.c | 671 -------------------- tools/testing/selftests/kexec/kexec_common_lib.sh | 36 +- 13 files changed, 3 insertions(+), 727 deletions(-) delete mode 100644 drivers/firmware/efi/efivars.c -- 2.35.1

3 years

3
6
0 0

[PATCH v2] KVM: selftest: Enhance handling WRMSR ICR register in x2APIC mode

by Zeng Guang

Hardware would directly write x2APIC ICR register instead of software emulation in some circumstances, e.g when Intel IPI virtualization is enabled. This behavior requires normal reserved bits checking to ensure them input as zero, otherwise it will cause #GP. So we need mask out those reserved bits from the data written to vICR register. Remove Delivery Status bit emulation in test case as this flag is invalid and not needed in x2APIC mode. KVM may ignore clearing it during interrupt dispatch which will lead to fake test failure. Opportunstically correct vector number for test sending IPI to non-existent vCPUs. Signed-off-by: Zeng Guang <guang.zeng(a)intel.com> --- .../selftests/kvm/x86_64/xapic_state_test.c | 20 ++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c index 0792334ba243..df916c6f53f9 100644 --- a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c +++ b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c @@ -70,13 +70,27 @@ static void ____test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) vcpu_ioctl(vm, vcpu->id, KVM_GET_LAPIC, &xapic); icr = (u64)(*((u32 *)&xapic.regs[APIC_ICR])) | (u64)(*((u32 *)&xapic.regs[APIC_ICR2])) << 32; - if (!vcpu->is_x2apic) + if (!vcpu->is_x2apic) { val &= (-1u | (0xffull << (32 + 24))); - ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + } else { + ASSERT_EQ(icr & ~APIC_ICR_BUSY, val & ~APIC_ICR_BUSY); + } } +#define X2APIC_RSVED_BITS_MASK (GENMASK_ULL(31,20) | \ + GENMASK_ULL(17,16) | \ + GENMASK_ULL(13,13)) + static void __test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) { + if (vcpu->is_x2apic) { + /* Hardware writing vICR register requires reserved bits 31:20, + * 17:16 and 13 kept as zero to avoid #GP exception. Data value + * written to vICR should mask out those bits above. + */ + val &= ~X2APIC_RSVED_BITS_MASK; + } ____test_icr(vm, vcpu, val | APIC_ICR_BUSY); ____test_icr(vm, vcpu, val & ~(u64)APIC_ICR_BUSY); } @@ -100,7 +114,7 @@ static void test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu) icr = APIC_INT_ASSERT | 0xff; for (i = vcpu->id + 1; i < 0xff; i++) { for (j = 0; j < 8; j++) - __test_icr(vm, vcpu, i << (32 + 24) | APIC_INT_ASSERT | (j << 8)); + __test_icr(vm, vcpu, i << (32 + 24) | icr | (j << 8)); } /* And again with a shorthand destination for all types of IPIs. */ -- 2.27.0

3 years

4
6
0 0

[RFC PATCH] kunit: tool: Enable virtio/PCI by default on UML

by David Gow

There are several tests which depend on PCI, and hence need a bunch of extra options to run under UML. This makes it awkward to give configuration instructions (whether in documentation, or as part of a .kunitconfig file), as two separate, incompatible sets of config options are required for UML and "most other architectures". For non-UML architectures, it's possible to add default kconfig options via the qemu_config python files, but there's no equivalent for UML. Add a new tools/testing/kunit/configs/arch_uml.config file containing extra kconfig options to use on UML. Signed-off-by: David Gow <davidgow(a)google.com> --- It's really ugly to have to type: --kconfig_add CONFIG_VIRTIO_UML=y --kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y when running many tests under UML, particularly since it isn't required on other architectures. This came up in discussion with Daniel this morning, and while the ability to repeat the --kunitconfig flag would go some way to alleviate this, having to add: --kunitconfig ./tools/testing/kunit/config/uml_pci.kunitconfig isn't all that much better. So it seems like adding something by default would be nice. This implementation is not perfect (in particular, there's no easy way of _disabling_ these options now, though [1] probably will help). The 'arch_uml.config' filename can be bikeshedded, too. Thoughts? --- tools/testing/kunit/configs/arch_uml.config | 5 +++++ tools/testing/kunit/kunit_kernel.py | 11 ++++++++--- 2 files changed, 13 insertions(+), 3 deletions(-) create mode 100644 tools/testing/kunit/configs/arch_uml.config diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config new file mode 100644 index 000000000000..e824ce43b05a --- /dev/null +++ b/tools/testing/kunit/configs/arch_uml.config @@ -0,0 +1,5 @@ +# Config options which are added to UML builds by default + +# Enable virtio/pci, as a lot of tests require it. +CONFIG_VIRTIO_UML=y +CONFIG_UML_PCI_OVER_VIRTIO=y diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 3539efaf99ba..05e7b1e188d7 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -26,6 +26,7 @@ KUNITCONFIG_PATH = '.kunitconfig' OLD_KUNITCONFIG_PATH = 'last_used_kunitconfig' DEFAULT_KUNITCONFIG_PATH = 'tools/testing/kunit/configs/default.config' BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config' +UML_KCONFIG_PATH = 'tools/testing/kunit/configs/arch_uml.config' OUTFILE_PATH = 'test.log' ABS_TOOL_PATH = os.path.abspath(os.path.dirname(__file__)) QEMU_CONFIGS_DIR = os.path.join(ABS_TOOL_PATH, 'qemu_configs') @@ -53,7 +54,7 @@ class LinuxSourceTreeOperations: except subprocess.CalledProcessError as e: raise ConfigError(e.output.decode()) - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: pass def make_allyesconfig(self, build_dir: str, make_options) -> None: @@ -109,7 +110,7 @@ class LinuxSourceTreeOperationsQemu(LinuxSourceTreeOperations): self._kernel_command_line = qemu_arch_params.kernel_command_line + ' kunit_shutdown=reboot' self._extra_qemu_params = qemu_arch_params.extra_qemu_params - def make_arch_qemuconfig(self, base_kunitconfig: kunit_config.Kconfig) -> None: + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: kconfig = kunit_config.parse_from_string(self._kconfig) base_kunitconfig.merge_in_entries(kconfig) @@ -137,6 +138,10 @@ class LinuxSourceTreeOperationsUml(LinuxSourceTreeOperations): def __init__(self, cross_compile=None): super().__init__(linux_arch='um', cross_compile=cross_compile) + def make_arch_config(self, base_kunitconfig: kunit_config.Kconfig) -> None: + kconfig = kunit_config.parse_file(UML_KCONFIG_PATH) + base_kunitconfig.merge_in_entries(kconfig) + def make_allyesconfig(self, build_dir: str, make_options) -> None: kunit_parser.print_with_timestamp( 'Enabling all CONFIGs for UML...') @@ -313,7 +318,7 @@ class LinuxSourceTree: return self.build_config(build_dir, make_options) existing_kconfig = kunit_config.parse_file(kconfig_path) - self._ops.make_arch_qemuconfig(self._kconfig) + self._ops.make_arch_config(self._kconfig) if self._kconfig.is_subset_of(existing_kconfig) and not self._kunitconfig_changed(build_dir): return True print('Regenerating .config ...') -- 2.37.0.rc0.104.g0611611a94-goog

3 years

3
2
0 0

[PATCH v2 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection, and removes the need to NULL-terminate suite_sets. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. This is required, as otherwise the first two patches may break these tests entirely. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests, and with modules on x86_64, but there's always the possibility that there's something subtle and nasty on another architecture, so please test! Cheers, -- David Changes since v1: https://lore.kernel.org/linux-kselftest/20220618090310.1174932-1-davidgow@g… - Fix a compile issue when CONFIG_KUNIT=m (Thanks Christophe) - No longer NULL-terminate suite_sets. - Move the thunderbird Kconfig to the correct patch (Thanks Andra) - Add all the Tested-by and Acked-by tags. --- Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 27 ---- drivers/thunderbolt/Kconfig | 5 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 115 ++++---------- lib/kunit/executor_test.c | 144 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 152 insertions(+), 337 deletions(-) -- 2.37.0.rc0.104.g0611611a94-goog

3 years

4
11
0 0

[PATCH] KVM: selftest: Enhance handling WRMSR ICR register in x2APIC mode

by Zeng Guang

Hardware would directly write x2APIC ICR register instead of software emulation in some circumstances, e.g when Intel IPI virtualization is enabled. This behavior requires normal reserved bits checking to ensure them input as zero, otherwise it will cause #GP. So we need mask out those reserved bits from the data written to vICR register. Remove Delivery Status bit emulation in test case as this flag is invalid and not needed in x2APIC mode. KVM may ignore clearing it during interrupt dispatch which will lead to fake test failure. Opportunstically correct vector number for test sending IPI to non-existent vCPUs. Signed-off-by: Zeng Guang <guang.zeng(a)intel.com> --- .../selftests/kvm/x86_64/xapic_state_test.c | 20 ++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c index 0792334ba243..062d2e1adeb7 100644 --- a/tools/testing/selftests/kvm/x86_64/xapic_state_test.c +++ b/tools/testing/selftests/kvm/x86_64/xapic_state_test.c @@ -70,13 +70,27 @@ static void ____test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) vcpu_ioctl(vm, vcpu->id, KVM_GET_LAPIC, &xapic); icr = (u64)(*((u32 *)&xapic.regs[APIC_ICR])) | (u64)(*((u32 *)&xapic.regs[APIC_ICR2])) << 32; - if (!vcpu->is_x2apic) + if (!vcpu->is_x2apic) { val &= (-1u | (0xffull << (32 + 24))); - ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + ASSERT_EQ(icr, val & ~APIC_ICR_BUSY); + } else { + ASSERT_EQ(icr, val); + } } +#define X2APIC_RSVED_BITS_MASK (GENMASK_ULL(31,20) | \ + GENMASK_ULL(17,16) | \ + GENMASK_ULL(13,13)) + static void __test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu, uint64_t val) { + if (vcpu->is_x2apic) { + /* Hardware writing vICR register requires reserved bits 31:20, + * 17:16 and 13 kept as zero to avoid #GP exception. Data value + * written to vICR should mask out those bits above. + */ + val &= ~X2APIC_RSVED_BITS_MASK; + } ____test_icr(vm, vcpu, val | APIC_ICR_BUSY); ____test_icr(vm, vcpu, val & ~(u64)APIC_ICR_BUSY); } @@ -100,7 +114,7 @@ static void test_icr(struct kvm_vm *vm, struct kvm_vcpu *vcpu) icr = APIC_INT_ASSERT | 0xff; for (i = vcpu->id + 1; i < 0xff; i++) { for (j = 0; j < 8; j++) - __test_icr(vm, vcpu, i << (32 + 24) | APIC_INT_ASSERT | (j << 8)); + __test_icr(vm, vcpu, i << (32 + 24) | icr | (j << 8)); } /* And again with a shorthand destination for all types of IPIs. */ -- 2.27.0

3 years

1
0
0 0

Ruch z pierwszej pozycji w Google

by Wiktor Zielonko

Dzień dobry, jakiś czas temu zgłosiła się do nas firma, której strona internetowa nie pozycjonowała się wysoko w wyszukiwarce Google. Na podstawie wykonanego przez nas audytu SEO zoptymalizowaliśmy treści na stronie pod kątem wcześniej opracowanych słów kluczowych. Nasz wewnętrzny system codziennie analizuje prawidłowe działanie witryny. Dzięki indywidualnej strategii, firma zdobywa coraz więcej Klientów. Czy chcieliby Państwo zwiększyć liczbę osób odwiedzających stronę internetową firmy? Mógłbym przedstawić ofertę? Pozdrawiam serdecznie, Wiktor Zielonko

3 years

1
0
0 0

[PATCH] selftests: Make the usage formatting consistent in kselftest_deps.sh

by Gautam Menghani

Add a colon in the "Optional" test usage message to ensure consistency with the "Default" test usage message. Signed-off-by: Gautam Menghani <gautammenghani201(a)gmail.com> --- tools/testing/selftests/kselftest_deps.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh index 00e60d6eb16b..708cb5429633 100755 --- a/tools/testing/selftests/kselftest_deps.sh +++ b/tools/testing/selftests/kselftest_deps.sh @@ -26,7 +26,7 @@ echo " main Makefile when optional -p is specified." echo "- Prints pass/fail dependency check for each tests/sub-test." echo "- Prints pass/fail targets and libraries." echo "- Default: runs dependency checks on all tests." -echo "- Optional test name can be specified to check dependencies for it." +echo "- Optional: test name can be specified to check dependencies for it." exit 1 } -- 2.34.1

3 years

1
0
0 0

[GIT PULL] Kselftest fixes update for Linux 5.19-rc4

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 5.19-rc4 This Kselftest fixes update for Linux 5.19-rc4 consists of compile time fixes and run-time resources leaks. -- Fix clang cross compilation -- Fix resource leak when return error -- fix compile error for dma_map_benchmark -- Fix regression - make use of GUP_TEST_FILE macro diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit f2906aa863381afb0015a9eb7fefad885d4e5a56: Linux 5.19-rc1 (2022-06-05 17:18:54 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-5.19-rc4 for you to fetch changes up to 9b4d5c01eb234f66a15a746b1c73e10209edb199: selftests: make use of GUP_TEST_FILE macro (2022-06-16 17:05:50 -0600) ---------------------------------------------------------------- linux-kselftest-fixes-5.19-rc4 This Kselftest fixes update for Linux 5.19-rc4 consists of compile time fixes and run-time resources leaks. -- Fix clang cross compilation -- Fix resource leak when return error -- fix compile error for dma_map_benchmark -- Fix regression - make use of GUP_TEST_FILE macro ---------------------------------------------------------------- Ding Xiang (1): selftests: vm: Fix resource leak when return error Joel Savitz (1): selftests: make use of GUP_TEST_FILE macro Mark Brown (1): selftests: Fix clang cross compilation Yu Liao (1): selftests dma: fix compile error for dma_map_benchmark tools/testing/selftests/dma/Makefile | 1 + tools/testing/selftests/dma/dma_map_benchmark.c | 2 +- tools/testing/selftests/lib.mk | 25 +++++++++++++++++++++++-- tools/testing/selftests/vm/gup_test.c | 4 ++-- tools/testing/selftests/vm/ksm_tests.c | 2 ++ 5 files changed, 29 insertions(+), 5 deletions(-) ----------------------------------------------------------------

3 years

2
1
0 0

[PATCH] selftests/proc: Fix proc-pid-vm for vsyscall=xonly.

by Dylan Hatch

This test would erroneously fail the /proc/$PID/maps case if vsyscall=xonly since the existing probe of the vsyscall page only succeeds if the process has read permissions. Fix this by checking for either no vsyscall mapping OR an execute-only vsyscall mapping in the case were probing the vsyscall page segfaults. Signed-off-by: Dylan Hatch <dylanbhatch(a)google.com> --- tools/testing/selftests/proc/proc-pid-vm.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/proc/proc-pid-vm.c b/tools/testing/selftests/proc/proc-pid-vm.c index 28604c9f805c..5ca85520131f 100644 --- a/tools/testing/selftests/proc/proc-pid-vm.c +++ b/tools/testing/selftests/proc/proc-pid-vm.c @@ -213,9 +213,12 @@ static int make_exe(const uint8_t *payload, size_t len) static bool g_vsyscall = false; -static const char str_vsyscall[] = +static const char str_vsyscall_rx[] = "ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]\n"; +static const char str_vsyscall_x[] = +"ffffffffff600000-ffffffffff601000 --xp 00000000 00:00 0 [vsyscall]\n"; + #ifdef __x86_64__ static void sigaction_SIGSEGV(int _, siginfo_t *__, void *___) { @@ -261,6 +264,7 @@ int main(void) int exec_fd; vsyscall(); + const char *str_vsyscall = g_vsyscall ? str_vsyscall_rx : str_vsyscall_x; atexit(ate); @@ -314,7 +318,8 @@ int main(void) /* Test /proc/$PID/maps */ { - const size_t len = strlen(buf0) + (g_vsyscall ? strlen(str_vsyscall) : 0); + const size_t len_buf0 = strlen(buf0); + const size_t len_vsys = strlen(str_vsyscall); char buf[256]; ssize_t rv; int fd; @@ -325,11 +330,16 @@ int main(void) return 1; } rv = read(fd, buf, sizeof(buf)); - assert(rv == len); - assert(memcmp(buf, buf0, strlen(buf0)) == 0); if (g_vsyscall) { - assert(memcmp(buf + strlen(buf0), str_vsyscall, strlen(str_vsyscall)) == 0); + assert(rv == len_buf0 + len_vsys); + } else { + /* If vsyscall isn't readable, it's either x-only or not mapped at all */ + assert(rv == len_buf0 + len_vsys || rv == len_buf0); } + assert(memcmp(buf, buf0, len_buf0) == 0); + /* Check for vsyscall mapping if buf is long enough */ + if (rv == len_buf0 + len_vsys) + assert(memcmp(buf + len_buf0, str_vsyscall, len_vsys) == 0); } /* Test /proc/$PID/smaps */ -- 2.36.1.476.g0c4daa206d-goog

3 years

2
7
0 0

[PATCH v2 0/9] drm: selftest: Convert to KUnit

by Maíra Canal

Hi everyone, Here is the v2 of the conversion of DRM selftests to KUnit. Some style changes were made to align to the drm_format_helper series [1] and the documentation [2], as renaming the kunit_suite and the test cases to use underscores as suggested, changing the filenames and using a generic symbol to group all tests at the config menu. Moreover, in the previous version of the series, the drm_cmdline_parser tests were broken into multiple test functions. As pointed out by Shuan Khan, it made the tests harder to comprehend. So, the refactoring was dropped and straightforward conversion of the tests was made without any functional changes. Thanks for your attention and any feedback is welcomed! Best Regards, - Maíra Canal v1 -> v2: https://lore.kernel.org/dri-devel/20220615135824.15522-1-maira.canal@usp.br… - The suites no longer end in _tests (David Gow). - Remove the TODO entry involving the conversion of selftests to KUnit (Javier Martinez Canillas). - Change the filenames to match the documentation: use *_test.c (Javier Martinez Canillas). - Add MODULE_LICENSE to all tests (kernel test robot). - Make use of a generic symbol to group all tests - DRM_KUNIT_TEST (Javier Martinez Canillas). - Add .kunitconfig on the first patch (it was on the second patch of the series). - Straightforward conversion of the drm_cmdline_parser tests without functional changes (Shuah Khan) - Add David's Tested-by tags [1] https://lore.kernel.org/dri-devel/20220620160640.3790-1-jose.exposito89@gma… [2] https://www.kernel.org/doc/html/latest/dev-tools/kunit/style.html Arthur Grillo (1): drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit Documentation/gpu/todo.rst | 11 - drivers/gpu/drm/Kconfig | 15 +- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 667 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/.kunitconfig | 3 + drivers/gpu/drm/tests/Makefile | 6 + drivers/gpu/drm/tests/drm_buddy_test.c | 748 +++++++++++ .../gpu/drm/tests/drm_cmdline_parser_test.c | 1078 ++++++++++++++++ .../gpu/drm/tests/drm_damage_helper_test.c | 633 +++++++++ .../drm_dp_mst_helper_test.c} | 84 +- drivers/gpu/drm/tests/drm_format_test.c | 284 ++++ .../drm_framebuffer_test.c} | 25 +- .../test-drm_mm.c => tests/drm_mm_test.c} | 1135 +++++++--------- .../drm_plane_helper_test.c} | 103 +- .../test-drm_rect.c => tests/drm_rect_test.c} | 124 +- 27 files changed, 3395 insertions(+), 4331 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/.kunitconfig create mode 100644 drivers/gpu/drm/tests/Makefile create mode 100644 drivers/gpu/drm/tests/drm_buddy_test.c create mode 100644 drivers/gpu/drm/tests/drm_cmdline_parser_test.c create mode 100644 drivers/gpu/drm/tests/drm_damage_helper_test.c rename drivers/gpu/drm/{selftests/test-drm_dp_mst_helper.c => tests/drm_dp_mst_helper_test.c} (73%) create mode 100644 drivers/gpu/drm/tests/drm_format_test.c rename drivers/gpu/drm/{selftests/test-drm_framebuffer.c => tests/drm_framebuffer_test.c} (96%) rename drivers/gpu/drm/{selftests/test-drm_mm.c => tests/drm_mm_test.c} (58%) rename drivers/gpu/drm/{selftests/test-drm_plane_helper.c => tests/drm_plane_helper_test.c} (62%) rename drivers/gpu/drm/{selftests/test-drm_rect.c => tests/drm_rect_test.c} (53%) -- 2.36.1

3 years

3
11
0 0

Service Needed.

by Prasad Ronni

-- Hi, Are you currently open to work as our executive company representative on contractual basis working remotely? If yes, we will be happy to share more details. Looking forward to your response. Regards,

3 years

1
0
0 0

[PATCH v10 0/2] Introduce XSAVE feature self-test

by Pengfei Xu

The XSAVE feature set supports the saving and restoring of xstate components. XSAVE feature has been used for process context switching. XSAVE components include x87 state for FP execution environment, SSE state, AVX state and so on. In order to ensure that XSAVE works correctly, add XSAVE most basic test for XSAVE architecture functionality. This patch tests "FP, SSE(XMM), AVX2(YMM), AVX512_OPMASK/AVX512_ZMM_Hi256/ AVX512_Hi16_ZMM and PKRU parts" xstates with following cases: 1. The contents of these xstates in the process should not change after the signal handling. 2. The contents of these xstates in the child process should be the same as the contents of the xstate in the parent process after the fork syscall. 3. The contents of xstates in the parent process should not change after the context switch. Because xstate like XMM will not be preserved across function calls, fork() and raise() are implemented and inlined. To prevent GCC from generating any FP/SSE(XMM)/AVX/PKRU code, add "-mno-sse -mno-mmx -mno-sse2 -mno-avx -mno-pku" compiler arguments. stdlib.h can not be used because of the "-mno-sse" option. Thanks Dave, Hansen for the above suggestion! Thanks Chen Yu; Shuah Khan; Chatre Reinette and Tony Luck's comments! Thanks to Bae, Chang Seok for a bunch of comments! ======== - Change from v9 to v10 - Remove the small function if the function will be called once and there is no good reason. (Shuah Khan) - Change from v8 to v9 - Use function pointers to make it more structured. (Hansen, Dave) - Improve the function name: xstate_tested -> xstate_in_test. (Chang S. Bae) - Break this test up into two pieces: keep the xstate key test steps with "-mno-sse" and no stdlib.h, keep others in xstate.c file. (Hansen, Dave) - Use kselftest infrastructure for xstate.c file. (Hansen, Dave) - Use instruction back to populate fp xstate buffer. (Hansen, Dave) - Will skip the test if cpu could not support xsave. (Chang S. Bae) - Use __cpuid_count() helper in kselftest.h. (Reinette, Chatre) - Change from v7 to v8 Many thanks to Bae, Chang Seok for a bunch of comments as follow: - Use the filling buffer way to prepare the xstate buffer, and use xrstor instruction way to load the tested xstates. - Remove useless dump_buffer, compare_buffer functions. - Improve the struct of xstate_info. - Added AVX512_ZMM_Hi256 and AVX512_Hi16_ZMM components in xstate test. - Remove redundant xstate_info.xstate_mask, xstate_flag[], and xfeature_test_mask, use xstate_info.mask instead. - Check if xfeature is supported outside of fill_xstate_buf() , this change is easier to read and understand. - Remove useless wrpkru, only use filling all tested xstate buffer in fill_xstates_buf(). - Improve a bunch of function names and variable names. - Improve test steps flow for readability. - Change from v6 to v7: - Added the error number and error description of the reason for the failure, thanks Shuah Khan's suggestion. - Added a description of what these tests are doing in the head comments. - Added changes update in the head comments. - Added description of the purpose of the function. thanks Shuah Khan. - Change from v5 to v6: - In order to prevent GCC from generating any FP code by mistake, "-mno-sse -mno-mmx -mno-sse2 -mno-avx -mno-pku" compiler parameter was added, it's referred to the parameters for compiling the x86 kernel. Thanks Dave Hansen's suggestion. - Removed the use of "kselftest.h", because kselftest.h included <stdlib.h>, and "stdlib.h" would use sse instructions in it's libc, and this *XSAVE* test needed to be compiled without libc sse instructions(-mno-sse). - Improved the description in commit header, thanks Chen Yu's suggestion. - Becasue test code could not use buildin xsave64 in libc without sse, added xsave function by instruction way. - Every key test action would not use libc(like printf) except syscall until it's failed or done. If it's failed, then it would print the failed reason. - Used __cpuid_count() instead of native_cpuid(), becasue __cpuid_count() was a macro definition function with one instruction in libc and did not change xstate. Thanks Chatre Reinette, Shuah Khan. https://lore.kernel.org/linux-sgx/8b7c98f4-f050-bc1c-5699-fa598ecc66a2@linu… - Change from v4 to v5: - Moved code files into tools/testing/selftests/x86. - Delete xsave instruction test, becaue it's not related to kernel. - Improved case description. - Added AVX512 opmask change and related XSAVE content verification. - Added PKRU part xstate test into instruction and signal handling test. - Added XSAVE process swich test for FPU, AVX2, AVX512 opmask and PKRU part. - Change from v3 to v4: - Improve the comment in patch 1. - Change from v2 to v3: - Improve the description of patch 2 git log. - Change from v1 to v2: - Improve the cover-letter. Thanks Dave Hansen's suggestion. Pengfei Xu (2): selftests/x86/xstate: Add xstate signal handling test for XSAVE feature selftests/x86/xstate: Add xstate fork test for XSAVE feature tools/testing/selftests/x86/.gitignore | 1 + tools/testing/selftests/x86/Makefile | 11 +- tools/testing/selftests/x86/xstate.c | 208 +++++++++++++++ tools/testing/selftests/x86/xstate.h | 262 +++++++++++++++++++ tools/testing/selftests/x86/xstate_helpers.c | 209 +++++++++++++++ tools/testing/selftests/x86/xstate_helpers.h | 10 + 6 files changed, 699 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/x86/xstate.c create mode 100644 tools/testing/selftests/x86/xstate.h create mode 100644 tools/testing/selftests/x86/xstate_helpers.c create mode 100644 tools/testing/selftests/x86/xstate_helpers.h -- 2.31.1

3 years

1
2
0 0

[PATCH] kselftest: mqueue: increase timeout

by Vijai Kumar K

The default kselftest timeout is 45 seconds per test after which run_kselftest marks the test case as failure. Some mqueue perf tests take more than 100s to complete; especially in qemu environment. Increase the timeout to 180 seconds for mqueue. Signed-off-by: Vijai Kumar K <Vijaikumar_Kanagarajan(a)mentor.com> --- tools/testing/selftests/mqueue/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/mqueue/settings diff --git a/tools/testing/selftests/mqueue/settings b/tools/testing/selftests/mqueue/settings new file mode 100644 index 000000000000..a953c96aa16e --- /dev/null +++ b/tools/testing/selftests/mqueue/settings @@ -0,0 +1 @@ +timeout=180 -- 2.25.1

3 years

1
0
0 0

[PATCH MANUALSEL 5.17 3/3] KVM: selftests: Restrict test region to 48-bit physical addresses when using nested

by Sasha Levin

From: David Matlack <dmatlack(a)google.com> [ Upstream commit e0f3f46e42064a51573914766897b4ab95d943e3 ] The selftests nested code only supports 4-level paging at the moment. This means it cannot map nested guest physical addresses with more than 48 bits. Allow perf_test_util nested mode to work on hosts with more than 48 physical addresses by restricting the guest test region to 48-bits. While here, opportunistically fix an off-by-one error when dealing with vm_get_max_gfn(). perf_test_util.c was treating this as the maximum number of GFNs, rather than the maximum allowed GFN. This didn't result in any correctness issues, but it did end up shifting the test region down slightly when using huge pages. Suggested-by: Sean Christopherson <seanjc(a)google.com> Signed-off-by: David Matlack <dmatlack(a)google.com> Message-Id: <20220520233249.3776001-12-dmatlack(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../testing/selftests/kvm/lib/perf_test_util.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/perf_test_util.c b/tools/testing/selftests/kvm/lib/perf_test_util.c index 722df3a28791..ddd68ba0c99f 100644 --- a/tools/testing/selftests/kvm/lib/perf_test_util.c +++ b/tools/testing/selftests/kvm/lib/perf_test_util.c @@ -110,6 +110,7 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, struct kvm_vm *vm; uint64_t guest_num_pages; uint64_t backing_src_pagesz = get_backing_src_pagesz(backing_src); + uint64_t region_end_gfn; int i; pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode)); @@ -144,18 +145,29 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, pta->vm = vm; + /* Put the test region at the top guest physical memory. */ + region_end_gfn = vm_get_max_gfn(vm) + 1; + +#ifdef __x86_64__ + /* + * When running vCPUs in L2, restrict the test region to 48 bits to + * avoid needing 5-level page tables to identity map L2. + */ + if (pta->nested) + region_end_gfn = min(region_end_gfn, (1UL << 48) / pta->guest_page_size); +#endif /* * If there should be more memory in the guest test region than there * can be pages in the guest, it will definitely cause problems. */ - TEST_ASSERT(guest_num_pages < vm_get_max_gfn(vm), + TEST_ASSERT(guest_num_pages < region_end_gfn, "Requested more guest memory than address space allows.\n" " guest pages: %" PRIx64 " max gfn: %" PRIx64 " vcpus: %d wss: %" PRIx64 "]\n", - guest_num_pages, vm_get_max_gfn(vm), vcpus, + guest_num_pages, region_end_gfn - 1, vcpus, vcpu_memory_bytes); - pta->gpa = (vm_get_max_gfn(vm) - guest_num_pages) * pta->guest_page_size; + pta->gpa = (region_end_gfn - guest_num_pages) * pta->guest_page_size; pta->gpa = align_down(pta->gpa, backing_src_pagesz); #ifdef __s390x__ /* Align to 1M (segment size) */ -- 2.35.1

3 years

1
0
0 0

[PATCH MANUALSEL 5.18 3/3] KVM: selftests: Restrict test region to 48-bit physical addresses when using nested

by Sasha Levin

From: David Matlack <dmatlack(a)google.com> [ Upstream commit e0f3f46e42064a51573914766897b4ab95d943e3 ] The selftests nested code only supports 4-level paging at the moment. This means it cannot map nested guest physical addresses with more than 48 bits. Allow perf_test_util nested mode to work on hosts with more than 48 physical addresses by restricting the guest test region to 48-bits. While here, opportunistically fix an off-by-one error when dealing with vm_get_max_gfn(). perf_test_util.c was treating this as the maximum number of GFNs, rather than the maximum allowed GFN. This didn't result in any correctness issues, but it did end up shifting the test region down slightly when using huge pages. Suggested-by: Sean Christopherson <seanjc(a)google.com> Signed-off-by: David Matlack <dmatlack(a)google.com> Message-Id: <20220520233249.3776001-12-dmatlack(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../testing/selftests/kvm/lib/perf_test_util.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kvm/lib/perf_test_util.c b/tools/testing/selftests/kvm/lib/perf_test_util.c index 722df3a28791..ddd68ba0c99f 100644 --- a/tools/testing/selftests/kvm/lib/perf_test_util.c +++ b/tools/testing/selftests/kvm/lib/perf_test_util.c @@ -110,6 +110,7 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, struct kvm_vm *vm; uint64_t guest_num_pages; uint64_t backing_src_pagesz = get_backing_src_pagesz(backing_src); + uint64_t region_end_gfn; int i; pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode)); @@ -144,18 +145,29 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus, pta->vm = vm; + /* Put the test region at the top guest physical memory. */ + region_end_gfn = vm_get_max_gfn(vm) + 1; + +#ifdef __x86_64__ + /* + * When running vCPUs in L2, restrict the test region to 48 bits to + * avoid needing 5-level page tables to identity map L2. + */ + if (pta->nested) + region_end_gfn = min(region_end_gfn, (1UL << 48) / pta->guest_page_size); +#endif /* * If there should be more memory in the guest test region than there * can be pages in the guest, it will definitely cause problems. */ - TEST_ASSERT(guest_num_pages < vm_get_max_gfn(vm), + TEST_ASSERT(guest_num_pages < region_end_gfn, "Requested more guest memory than address space allows.\n" " guest pages: %" PRIx64 " max gfn: %" PRIx64 " vcpus: %d wss: %" PRIx64 "]\n", - guest_num_pages, vm_get_max_gfn(vm), vcpus, + guest_num_pages, region_end_gfn - 1, vcpus, vcpu_memory_bytes); - pta->gpa = (vm_get_max_gfn(vm) - guest_num_pages) * pta->guest_page_size; + pta->gpa = (region_end_gfn - guest_num_pages) * pta->guest_page_size; pta->gpa = align_down(pta->gpa, backing_src_pagesz); #ifdef __s390x__ /* Align to 1M (segment size) */ -- 2.35.1

3 years

1
0
0 0

Dear Partner,

by Dimitry Edik

Hello Dear, My Name is Dimitry Edik from Russia A special assistance to my Russia boss who deals in oil import and export He was killed by the Ukraine soldiers at the border side. He supplied oil to the Philippines company and he was paid over 90 per cent of the transaction and the remaining $18.6 Million dollars have been paid into a Taiwan bank in the Philippines..i want a partner that will assist me with the claims. Is a (DEAL ) 40% for you and 60% for me I have all information for the claims. Kindly read and reply to me back is 100 per cent risk-free Yours Sincerely Dimitry Edik

3 years

1
0
0 0

[PATCH] selftests/vm: Only run the 128TB boundary test if 5-level paging is enabled

by Adam Sindelar

The test va_128TBswitch.c expects to be able to pass mmap an address hint and length that cross the address 1<<47. This is not possible without 5-level page tables, so the test fails. The test is already only run on 64-bit powerpc and x86 archs, but this patch adds an additional check that skips the test if PG_TABLE_LEVELS < 5. There is precedent for checking /proc/config.gz in selftests, e.g. in selftests/firmware. Signed-off-by: Adam Sindelar <adam(a)wowsignal.io> --- tools/testing/selftests/vm/Makefile | 1 + tools/testing/selftests/vm/run_vmtests.sh | 13 +++++++--- tools/testing/selftests/vm/va_128TBswitch.sh | 26 ++++++++++++++++++++ 3 files changed, 36 insertions(+), 4 deletions(-) create mode 100755 tools/testing/selftests/vm/va_128TBswitch.sh diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 68cacffc93ec..bc64ca1e0de3 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -80,6 +80,7 @@ endif TEST_PROGS := run_vmtests.sh TEST_FILES := test_vmalloc.sh +TEST_FILEs += va_128TBswitch.sh KSFT_KHDR_INSTALL := 1 include ../lib.mk diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index e953f3cd9664..10cccbedaaa1 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -290,12 +290,17 @@ fi echo "-----------------------------" echo "running virtual address 128TB switch test" echo "-----------------------------" -./va_128TBswitch -if [ $? -ne 0 ]; then +./va_128TBswitch.sh +ret_val=$? + +if [ $ret_val -eq 0 ]; then + echo "[PASS]" +elif [ $ret_val -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip +else echo "[FAIL]" exitcode=1 -else - echo "[PASS]" fi fi # VADDR64 diff --git a/tools/testing/selftests/vm/va_128TBswitch.sh b/tools/testing/selftests/vm/va_128TBswitch.sh new file mode 100755 index 000000000000..f7b9db0bfd33 --- /dev/null +++ b/tools/testing/selftests/vm/va_128TBswitch.sh @@ -0,0 +1,26 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (C) 2022 Adam Sindelar (Meta) <adam(a)wowsignal.io> +# +# This is a test for mmap behavior with 5-level paging. This script wraps the +# real test to check that the kernel is configured to support at least 5 +# pagetable levels. + +# 1 means the test failed +exitcode=1 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +check_test_requirements() +{ + pg_table_levels=$(gzip -dcfq /proc/config.gz | grep PGTABLE_LEVELS | cut -d'=' -f 2) + if [ $pg_table_levels -lt 5 ]; then + echo "$0: PG_TABLE_LEVELS=${pg_table_levels}, must be >= 5 to run this test" + exit $ksft_skip + fi +} + +check_test_requirements +./va_128TBswitch -- 2.30.2

3 years

1
1
0 0

[PATCH] KVM: Fix a typo

by Zhang Jiaming

There is a typo in kvm_vm_elf_load. Change 'begining' to 'beginning'. Signed-off-by: Zhang Jiaming <jiaming(a)nfschina.com> --- tools/testing/selftests/kvm/lib/elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/elf.c b/tools/testing/selftests/kvm/lib/elf.c index 13e8e3dcf984..272ea7d39fb4 100644 --- a/tools/testing/selftests/kvm/lib/elf.c +++ b/tools/testing/selftests/kvm/lib/elf.c @@ -139,7 +139,7 @@ void kvm_vm_elf_load(struct kvm_vm *vm, const char *filename) offset = hdr.e_phoff + (n1 * hdr.e_phentsize); offset_rv = lseek(fd, offset, SEEK_SET); TEST_ASSERT(offset_rv == offset, - "Failed to seek to begining of program header %u,\n" + "Failed to seek to beginning of program header %u,\n" " filename: %s\n" " rv: %jd errno: %i", n1, filename, (intmax_t) offset_rv, errno); -- 2.25.1

3 years

1
0
0 0

Re: [PATCH 5.17 000/772] 5.17.14-rc1 review

by Naresh Kamboju

On Tue, 7 Jun 2022 at 23:41, Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> wrote: > > This is the start of the stable review cycle for the 5.17.14 release. > There are 772 patches in this series, all will be posted as a response > to this one. If anyone has any issues with these being applied, please > let me know. > > Responses should be made by Thu, 09 Jun 2022 16:48:02 +0000. > Anything received after that time might be too late. > > The whole patch series can be found in one patch at: > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.17.14-rc… > or in the git tree and branch at: > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.17.y > and the diffstat can be found below. > > thanks, > > greg k-h Results from Linaro’s test farm. Regressions found on qemu_x86_64: - kunit/kasan [1] Regressions found on qemu_i386: - kunit/kfence [2] - kunit/test_out_of_bounds_read We will bisect and let you know more details about this reported problem. Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> [1] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… [2] https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… ## Build * kernel: 5.17.14-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-5.17.y * git commit: d0f9b2818e1e4d43847e10d6e5310a0c653cb18f * git describe: v5.17.13-773-gd0f9b2818e1e * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.17.y/build/v5.17… ## Test Regressions (compared to v5.17.11-188-g8eb69e8f0d45) Regressions found on qemu_x86_64: - kunit/kasan [1] Regressions found on qemu_i386: - kunit/kfence [2] - kunit/test_out_of_bounds_read ## Metric Regressions (compared to v5.17.11-188-g8eb69e8f0d45) No metric regressions found. ## Test Fixes (compared to v5.17.11-188-g8eb69e8f0d45) No test fixes found. ## Metric Fixes (compared to v5.17.11-188-g8eb69e8f0d45) No metric fixes found. ## Test result summary total: 134591, pass: 121555, fail: 447, skip: 11730, xfail: 859 ## Build Summary * arm: 17 total, 14 passed, 3 failed * arm64: 20 total, 20 passed, 0 failed * i386: 17 total, 12 passed, 5 failed * mips: 4 total, 1 passed, 3 failed * parisc: 2 total, 2 passed, 0 failed * powerpc: 5 total, 2 passed, 3 failed * riscv: 5 total, 5 passed, 0 failed * s390: 5 total, 2 passed, 3 failed * sh: 2 total, 0 passed, 2 failed * sparc: 2 total, 2 passed, 0 failed * x86_64: 20 total, 20 passed, 0 failed ## Test suites summary * fwts * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-cap_bounds-tests * ltp-commands * ltp-commands-tests * ltp-containers * ltp-containers-tests * ltp-controllers-tests * ltp-cpuhotplug-tests * ltp-crypto * ltp-crypto-tests * ltp-cve-tests * ltp-dio-tests * ltp-fcntl-locktests * ltp-fcntl-locktests-tests * ltp-filecaps * ltp-filecaps-tests * ltp-fs * ltp-fs-tests * ltp-fs_bind * ltp-fs_bind-tests * ltp-fs_perms_simple * ltp-fs_perms_simple-tests * ltp-fsx * ltp-fsx-tests * ltp-hugetlb * ltp-hugetlb-tests * ltp-io * ltp-io-tests * ltp-ipc * ltp-ipc-tests * ltp-math-tests * ltp-mm-tests * ltp-nptl * ltp-nptl-tests * ltp-open-posix-tests * ltp-pty * ltp-pty-tests * ltp-sched-tests * ltp-securebits * ltp-securebits-tests * ltp-syscalls-tests * ltp-tracing-tests * network-basic-tests * packetdrill * perf * rcutorture * ssuite * v4l2-compliance * vdso -- Linaro LKFT https://lkft.linaro.org

3 years

6
8
0 0

[PATCH bpf-next] selftests/bpf: Enable config options needed for xdp_synproxy test

by Maxim Mikityanskiy

This commit adds the kernel config options needed to run the recently added xdp_synproxy test. Users without these options will hit errors like this: test_synproxy:FAIL:iptables -t raw -I PREROUTING -i tmp1 -p tcp -m tcp --syn --dport 8080 -j CT --notrack unexpected error: 256 (errno 22) Signed-off-by: Maxim Mikityanskiy <maximmi(a)nvidia.com> Suggested-by: Alexei Starovoitov <alexei.starovoitov(a)gmail.com> --- tools/testing/selftests/bpf/config | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config index 3b3edc0fc8a6..c05904d631ec 100644 --- a/tools/testing/selftests/bpf/config +++ b/tools/testing/selftests/bpf/config @@ -57,3 +57,9 @@ CONFIG_FPROBE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_MPTCP=y +CONFIG_NETFILTER_SYNPROXY=y +CONFIG_NETFILTER_XT_TARGET_CT=y +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_SYNPROXY=y +CONFIG_IP_NF_RAW=y -- 2.30.2

3 years

2
1
0 0

[PATCH 0/5] Rework KUnit test execution in modules

by David Gow

This patch series makes two changes to how KUnit test suites are stored and executed: - The .kunit_test_suites section is now used for tests in modules (in lieu of a module_init funciton), as well as for built-in tests. The module loader will now trigger test execution. This frees up the module_init function for other uses. - Instead of storing an array of arrays of suites, have the kunit_test_suite() and kunit_test_suites() macros append to one global (or per-module) list of test suites. This removes a needless layer of indirection. The upshot of this is that it should now be possible to use the kunit_test_suite() and kunit_test_suites() macros to register test suites even from within modules which otherwise had module_init functions. This was proving to be quite a common issue, resulting in several modules calling into KUnit's private suite execution functions to run their tests (often introducing incompatibilities with the KUnit tooling). This series also fixes the thunderbolt, nitro_enclaves, and sdhci-of-aspeed tests to use kunit_test_suite() now that it works. Huge thanks to Jeremy Kerr, who designed and implemented the module loader changes, and to Daniel Latypov for pushing the simplification of the nested arrays in .kunit_test_suites. I've tested this series both with builtin tests, and with modules on x86_64, but there's always the possibility that there's something subtle and nasty on another architecture, so please test! Cheers, -- David Daniel Latypov (1): kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites David Gow (3): thunderbolt: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro Jeremy Kerr (1): kunit: unify module and builtin suite definitions drivers/mmc/host/Kconfig | 5 +- drivers/mmc/host/sdhci-of-aspeed-test.c | 8 +- drivers/mmc/host/sdhci-of-aspeed.c | 27 ---- drivers/thunderbolt/Kconfig | 5 +- drivers/thunderbolt/domain.c | 3 - drivers/thunderbolt/tb.h | 8 - drivers/thunderbolt/test.c | 12 +- drivers/virt/nitro_enclaves/Kconfig | 5 +- drivers/virt/nitro_enclaves/ne_misc_dev.c | 27 ---- .../virt/nitro_enclaves/ne_misc_dev_test.c | 5 +- include/kunit/test.h | 60 ++------ include/linux/module.h | 5 + kernel/module/main.c | 6 + lib/kunit/executor.c | 117 ++++----------- lib/kunit/executor_test.c | 139 +++++------------- lib/kunit/test.c | 54 ++++++- 16 files changed, 152 insertions(+), 334 deletions(-) -- 2.36.1.476.g0c4daa206d-goog

3 years

6
13
0 0

[PATCH v2 net] ipv4: fix bind address validity regression tests

by Riccardo Paolo Bestetti

Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduces support for binding to nonlocal addresses, as well as some basic test coverage for some of the related cases. Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. It also introduces new set_sysctl calls for the ipv4_bind test group, as to perform the ICMP binding tests it is necessary to allow ICMP socket creation by setting the net.ipv4.ping_group_range knob. Fixes: b4a028c4d031 ("ipv4: ping: fix bind address validity check") Reported-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> Signed-off-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> --- This has been tested on the net tree (@ b4a028c4d031) w/ the following: $ cd $KERNEL_TREE/tools/testing/selftests/net $ make nettest # PATH=$PATH:./ ./fcnal-test.sh -t ipv4_bind -v All tests, including the previously broken ones and the new tests, pass with the expected results. tools/testing/selftests/net/fcnal-test.sh | 36 +++++++++++++++++------ 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 75223b63e3c8..03b586760164 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -1800,24 +1800,32 @@ ipv4_addr_bind_novrf() done # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b - log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + run_cmd nettest -s -R -f -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + + log_start + run_cmd nettest -s -f -l ${a} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address" # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address" # @@ -1870,24 +1878,32 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + log_start + run_cmd nettest -s -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind" + + log_start + run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind" + # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind" # @@ -1922,10 +1938,12 @@ ipv4_addr_bind() log_subsection "No VRF" setup + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_novrf log_subsection "With VRF" setup "yes" + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null ipv4_addr_bind_vrf } -- 2.36.1

3 years

2
1
0 0

[PATCH 00/10] drm: selftest: Convert to KUnit

by Maíra Canal

KUnit unifies the test structure and provides helper tools that simplify the development of tests. The basic use case allows running tests as regular processes, which makes it easier to run unit tests on a development machine and to integrate the tests into a CI system. That said, the conversion of selftests for DRM to KUnit tests is beneficial as it unifies the testing API by using the KUnit API. KUnit is beneficial for developers as it eases the process to run unit tests. It is possible to run the tests by using the kunit-tool on userspace with the following command: ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests --arch=x86_64 For CI system, it is possible to execute during the build. But, we also think about IGT: we are developing a patch to introduce KUnit to IGT. These patches were developed during a KUnit hackathon [0] last October. Now, we believe that both the IGT side and the Kernel side are in good shape for submission. If you are willing to check the output, here is the Pastebin with the output and execution times [1]. [0] https://groups.google.com/g/kunit-dev/c/YqFR1q2uZvk/m/IbvItSfHBAAJ [1] https://pastebin.com/FJjLPKsC - Arthur Grillo, Isabella Basso, and Maíra Canal Arthur Grillo (2): drm: selftest: refactor drm_cmdline_parser drm: selftest: convert drm_mm selftest to KUnit Maíra Canal (8): drm: selftest: convert drm_damage_helper selftest to KUnit drm: selftest: convert drm_cmdline_parser selftest to KUnit drm: selftest: convert drm_rect selftest to KUnit drm: selftest: convert drm_format selftest to KUnit drm: selftest: convert drm_plane_helper selftest to KUnit drm: selftest: convert drm_dp_mst_helper selftest to KUnit drm: selftest: convert drm_framebuffer selftest to KUnit drm: selftest: convert drm_buddy selftest to KUnit drivers/gpu/drm/Kconfig | 20 +- drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/selftests/Makefile | 8 - .../gpu/drm/selftests/drm_buddy_selftests.h | 15 - .../gpu/drm/selftests/drm_cmdline_selftests.h | 68 - drivers/gpu/drm/selftests/drm_mm_selftests.h | 28 - .../gpu/drm/selftests/drm_modeset_selftests.h | 40 - drivers/gpu/drm/selftests/drm_selftest.c | 109 -- drivers/gpu/drm/selftests/drm_selftest.h | 41 - drivers/gpu/drm/selftests/test-drm_buddy.c | 994 -------------- .../drm/selftests/test-drm_cmdline_parser.c | 1141 ----------------- .../drm/selftests/test-drm_damage_helper.c | 667 ---------- drivers/gpu/drm/selftests/test-drm_format.c | 280 ---- .../drm/selftests/test-drm_modeset_common.c | 32 - .../drm/selftests/test-drm_modeset_common.h | 52 - drivers/gpu/drm/tests/.kunitconfig | 3 + drivers/gpu/drm/tests/Kconfig | 130 ++ drivers/gpu/drm/tests/Makefile | 10 + drivers/gpu/drm/tests/test-drm_buddy.c | 748 +++++++++++ .../gpu/drm/tests/test-drm_cmdline_parser.c | 799 ++++++++++++ .../gpu/drm/tests/test-drm_damage_helper.c | 633 +++++++++ .../test-drm_dp_mst_helper.c | 82 +- drivers/gpu/drm/tests/test-drm_format.c | 284 ++++ .../test-drm_framebuffer.c | 25 +- .../drm/{selftests => tests}/test-drm_mm.c | 1135 +++++++--------- .../test-drm_plane_helper.c | 101 +- .../drm/{selftests => tests}/test-drm_rect.c | 124 +- 27 files changed, 3240 insertions(+), 4331 deletions(-) delete mode 100644 drivers/gpu/drm/selftests/Makefile delete mode 100644 drivers/gpu/drm/selftests/drm_buddy_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_cmdline_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_mm_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_modeset_selftests.h delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.c delete mode 100644 drivers/gpu/drm/selftests/drm_selftest.h delete mode 100644 drivers/gpu/drm/selftests/test-drm_buddy.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_cmdline_parser.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_damage_helper.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_format.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.c delete mode 100644 drivers/gpu/drm/selftests/test-drm_modeset_common.h create mode 100644 drivers/gpu/drm/tests/.kunitconfig create mode 100644 drivers/gpu/drm/tests/Kconfig create mode 100644 drivers/gpu/drm/tests/Makefile create mode 100644 drivers/gpu/drm/tests/test-drm_buddy.c create mode 100644 drivers/gpu/drm/tests/test-drm_cmdline_parser.c create mode 100644 drivers/gpu/drm/tests/test-drm_damage_helper.c rename drivers/gpu/drm/{selftests => tests}/test-drm_dp_mst_helper.c (73%) create mode 100644 drivers/gpu/drm/tests/test-drm_format.c rename drivers/gpu/drm/{selftests => tests}/test-drm_framebuffer.c (96%) rename drivers/gpu/drm/{selftests => tests}/test-drm_mm.c (58%) rename drivers/gpu/drm/{selftests => tests}/test-drm_plane_helper.c (62%) rename drivers/gpu/drm/{selftests => tests}/test-drm_rect.c (53%) -- 2.36.1

3 years

5
16
0 0

[RFC PATCH] selftests/vm: enable running select groups of tests

by Joel Savitz

Add the ability to run one or more groups of vm tests (specified by the environment variable TEST_ITEMS). Preserve existing default behavior of running all tests when TEST_ITEMS is empty or "default". Documentation of test groups is included in the patch as follows: # ./run_vmtests.sh [ -h || --help ] usage: ./tools/testing/selftests/vm/run_vmtests.sh [ -h ] -h: display this message The default behavior is to run all tests. Alternatively, specific groups tests can be run by defining the TEST_ITEMS shell variable with a space-separated string of one or more of the following: - mmap tests for mmap(2) - gup_test tests for gup using gup_test interface - userfaultfd tests for userfaultfd(2) - compaction a test for the patch "Allow compaction of unevictable pages" - mlock tests for mlock(2) - mremap tests for mremap(2) - hugevm tests for very large virtual address space - vmalloc vmalloc smoke tests - hmm hmm smoke tests - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret test memfd_secret(2) - process_mrelease test process_mrelease(2) - ksm ksm tests that do not require >=2 NUMA nodes - ksm_numa ksm tests that require >=2 NUMA nodes example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh Signed-off-by: Joel Savitz <jsavitz(a)redhat.com> --- tools/testing/selftests/vm/run_vmtests.sh | 224 +++++++++++++++------- 1 file changed, 150 insertions(+), 74 deletions(-) diff --git a/tools/testing/selftests/vm/run_vmtests.sh b/tools/testing/selftests/vm/run_vmtests.sh index 41fce8bea929..d31fc66205f8 100755 --- a/tools/testing/selftests/vm/run_vmtests.sh +++ b/tools/testing/selftests/vm/run_vmtests.sh @@ -1,22 +1,74 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -#please run as root +# Please run as root # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 mnt=./huge exitcode=0 - -#get huge pagesize and freepages from /proc/meminfo -while read -r name size unit; do - if [ "$name" = "HugePages_Free:" ]; then - freepgs="$size" - fi - if [ "$name" = "Hugepagesize:" ]; then - hpgsize_KB="$size" +nr_tests_ran=0 + +if [ ${1:-0} == "-h" ] || [ ${1:-0} == "--help" ] +then + cat <<EOF +usage: ${BASH_SOURCE[0]:-$0} [ -h ] + -h: display this message + +The default behavior is to run all tests. + +Alternatively, specific groups tests can be run by defining +the TEST_ITEMS shell variable with a space-separated string +of one or more of the following: +- mmap + tests for mmap(2) +- gup_test + tests for gup using gup_test interface +- userfaultfd + tests for userfaultfd(2) +- compaction + a test for the patch "Allow compaction of unevictable pages" +- mlock + tests for mlock(2) +- mremap + tests for mremap(2) +- hugevm + tests for very large virtual address space +- vmalloc + vmalloc smoke tests +- hmm + hmm smoke tests +- madv_populate + test memadvise(2) MADV_POPULATE_{READ,WRITE} options +- memfd_secret + test memfd_secret(2) +- process_mrelease + test process_mrelease(2) +- ksm + ksm tests that do not require >=2 NUMA nodes +- ksm_numa + ksm tests that require >=2 NUMA nodes +example: TEST_ITEMS="hmm mmap ksm" ./run_vmtests.sh +EOF + exit 0 +fi # $1 == -h || $1 == --help + +# default behavior: run all tests +TEST_ITEMS=${TEST_ITEMS:-default} + +echo "Selected test items: ${TEST_ITEMS}" + +test_selected() { + if [ "$TEST_ITEMS" == "default" ]; then + # If no TEST_ITEMS are specified, run all tests + return 0 fi -done < /proc/meminfo + echo ${TEST_ITEMS} | grep ${1} 2>&1 >/dev/null + return ${?} +} + +# Hugepage setup only needed for hugetlb tests +if test_selected "hugetlb"; then # Simple hugetlbfs tests have a hardcoded minimum requirement of # huge pages totaling 256MB (262144KB) in size. The userfaultfd @@ -28,7 +80,17 @@ hpgsize_MB=$((hpgsize_KB / 1024)) half_ufd_size_MB=$((((nr_cpus * hpgsize_MB + 127) / 128) * 128)) needmem_KB=$((half_ufd_size_MB * 2 * 1024)) -#set proper nr_hugepages +# get huge pagesize and freepages from /proc/meminfo +while read -r name size unit; do + if [ "$name" = "HugePages_Free:" ]; then + freepgs="$size" + fi + if [ "$name" = "Hugepagesize:" ]; then + hpgsize_KB="$size" + fi +done < /proc/meminfo + +# set proper nr_hugepages if [ -n "$freepgs" ] && [ -n "$hpgsize_KB" ]; then nr_hugepgs=$(cat /proc/sys/vm/nr_hugepages) needpgs=$((needmem_KB / hpgsize_KB)) @@ -57,126 +119,140 @@ else exit 1 fi -#filter 64bit architectures +fi # test_selected "hugetlb" + +# filter 64bit architectures ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64" if [ -z "$ARCH" ]; then ARCH=$(uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/') fi VADDR64=0 -echo "$ARCH64STR" | grep "$ARCH" && VADDR64=1 +echo "$ARCH64STR" | grep "$ARCH" &>/dev/null && VADDR64=1 # Usage: run_test [test binary] [arbitrary test arguments...] run_test() { - local title="running $*" - local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) - printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" - - "$@" - local ret=$? - if [ $ret -eq 0 ]; then - echo "[PASS]" - elif [ $ret -eq $ksft_skip ]; then - echo "[SKIP]" - exitcode=$ksft_skip - else - echo "[FAIL]" - exitcode=1 - fi + if test_selected ${CATEGORY}; then + local title="running $*" + local sep=$(echo -n "$title" | tr "[:graph:][:space:]" -) + printf "%s\n%s\n%s\n" "$sep" "$title" "$sep" + + "$@" + local ret=$? + if [ $ret -eq 0 ]; then + echo "[PASS]" + elif [ $ret -eq $ksft_skip ]; then + echo "[SKIP]" + exitcode=$ksft_skip + else + echo "[FAIL]" + exitcode=1 + fi + nr_tests_ran=$((nr_tests_ran + 1)) + fi # test_selected } -mkdir "$mnt" -mount -t hugetlbfs none "$mnt" +# setup only needed for hugetlb tests +if test_selected "hugetlb"; then + mkdir "$mnt" + mount -t hugetlbfs none "$mnt" +fi -run_test ./hugepage-mmap +CATEGORY="hugetlb" run_test ./hugepage-mmap shmmax=$(cat /proc/sys/kernel/shmmax) shmall=$(cat /proc/sys/kernel/shmall) echo 268435456 > /proc/sys/kernel/shmmax echo 4194304 > /proc/sys/kernel/shmall -run_test ./hugepage-shm +CATEGORY="hugetlb" run_test ./hugepage-shm echo "$shmmax" > /proc/sys/kernel/shmmax echo "$shmall" > /proc/sys/kernel/shmall -run_test ./map_hugetlb +CATEGORY="hugetlb" run_test ./map_hugetlb -run_test ./hugepage-mremap "$mnt"/huge_mremap -rm -f "$mnt"/huge_mremap +CATEGORY="hugetlb" run_test ./hugepage-mremap "$mnt"/huge_mremap +test_selected "hugetlb" && rm -f "$mnt"/huge_mremap -run_test ./hugepage-vmemmap +CATEGORY="hugetlb" run_test ./hugepage-vmemmap -run_test ./hugetlb-madvise "$mnt"/madvise-test -rm -f "$mnt"/madvise-test +CATEGORY="hugetlb" run_test ./hugetlb-madvise "$mnt"/madvise-test +test_selected "hugetlb" && rm -f "$mnt"/madvise-test -echo "NOTE: The above hugetlb tests provide minimal coverage. Use" -echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" -echo " hugetlb regression testing." +if test_selected "hugetlb"; then + echo "NOTE: These hugetlb tests provide minimal coverage. Use" + echo " https://github.com/libhugetlbfs/libhugetlbfs.git for" + echo " hugetlb regression testing." +fi -run_test ./map_fixed_noreplace +CATEGORY="mmap" run_test ./map_fixed_noreplace # get_user_pages_fast() benchmark -run_test ./gup_test -u +CATEGORY="gup_test" run_test ./gup_test -u # pin_user_pages_fast() benchmark -run_test ./gup_test -a +CATEGORY="gup_test" run_test ./gup_test -a # Dump pages 0, 19, and 4096, using pin_user_pages: -run_test ./gup_test -ct -F 0x1 0 19 0x1000 +CATEGORY="gup_test" run_test ./gup_test -ct -F 0x1 0 19 0x1000 -run_test ./userfaultfd anon 20 16 +CATEGORY="userfaultfd" run_test ./userfaultfd anon 20 16 # Test requires source and destination huge pages. Size of source # (half_ufd_size_MB) is passed as argument to test. -run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 -run_test ./userfaultfd shmem 20 16 - -#cleanup -umount "$mnt" -rm -rf "$mnt" -echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +CATEGORY="userfaultfd" run_test ./userfaultfd hugetlb "$half_ufd_size_MB" 32 +CATEGORY="userfaultfd" run_test ./userfaultfd shmem 20 16 + +# cleanup (only needed when running hugetlb tests) +if test_selected "hugetlb"; then + umount "$mnt" + rm -rf "$mnt" + echo "$nr_hugepgs" > /proc/sys/vm/nr_hugepages +fi -run_test ./compaction_test +CATEGORY="compaction" run_test ./compaction_test -run_test sudo -u nobody ./on-fault-limit +CATEGORY="mlock" run_test sudo -u nobody ./on-fault-limit -run_test ./map_populate +CATEGORY="mmap" run_test ./map_populate -run_test ./mlock-random-test +CATEGORY="mlock" run_test ./mlock-random-test -run_test ./mlock2-tests +CATEGORY="mlock" run_test ./mlock2-tests -run_test ./mrelease_test +CATEGORY="process_mrelease" run_test ./mrelease_test -run_test ./mremap_test +CATEGORY="mremap" run_test ./mremap_test -run_test ./thuge-gen +CATEGORY="hugetlb" run_test ./thuge-gen if [ $VADDR64 -ne 0 ]; then - run_test ./virtual_address_range + CATEGORY="hugevm" run_test ./virtual_address_range # virtual address 128TB switch test - run_test ./va_128TBswitch + CATEGORY="hugevm" run_test ./va_128TBswitch fi # VADDR64 # vmalloc stability smoke test -run_test ./test_vmalloc.sh smoke +CATEGORY="vmalloc" run_test ./test_vmalloc.sh smoke -run_test ./mremap_dontunmap +CATEGORY="mremap" run_test ./mremap_dontunmap -run_test ./test_hmm.sh smoke +CATEGORY="hmm" run_test ./test_hmm.sh smoke # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests -run_test ./madv_populate +CATEGORY="madv_populate" run_test ./madv_populate -run_test ./memfd_secret +CATEGORY="memfd_secret" run_test ./memfd_secret # KSM MADV_MERGEABLE test with 10 identical pages -run_test ./ksm_tests -M -p 10 +CATEGORY="ksm" run_test ./ksm_tests -M -p 10 # KSM unmerge test -run_test ./ksm_tests -U +CATEGORY="ksm" run_test ./ksm_tests -U # KSM test with 10 zero pages and use_zero_pages = 0 -run_test ./ksm_tests -Z -p 10 -z 0 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 0 # KSM test with 10 zero pages and use_zero_pages = 1 -run_test ./ksm_tests -Z -p 10 -z 1 +CATEGORY="ksm" run_test ./ksm_tests -Z -p 10 -z 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 1 -run_test ./ksm_tests -N -m 1 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 1 # KSM test with 2 NUMA nodes and merge_across_nodes = 0 -run_test ./ksm_tests -N -m 0 +CATEGORY="ksm_numa" run_test ./ksm_tests -N -m 0 + +echo "Ran $nr_tests_ran tests" exit $exitcode -- 2.31.1

3 years

2
1
0 0

[RFC PATCH net] ipv4: fix bind address validity regression tests

by Riccardo Paolo Bestetti

Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduced support for binding to nonlocal addresses, as well as some basic test coverage for some of the cases. Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. PLEASE NOTE THAT THIS PATCH SHOULD NOT BE APPLIED AS-IS. The ICMP broadcast and multicast regression tests succeed, but they do so while returning the wrong error status. In particular, it isn't the bind that fails, but the socket creation. This is /not/ correct, and it must be investigated to have proper regression testing. Other instances where this happens are: 1) if the broadcast/multicast addresses are replace with an allowed (e.g. local) address (bind should work, but socket is never created in the first place); 2) the commented out tests (nonlocal bind should work but ditto.) Additionally, please note that when the test cases are manually (i.e. without the network namespace setup from fcnal-test.sh) ran, the expected/correct outcome is observed. The reason I'm submitting this patch for comments, is that I'm failing to understand where the issue lies. (Disclamer: might be something stupid/trivial that I'm plainly missing due to tunnel vision.) Signed-off-by: Riccardo Paolo Bestetti <pbl(a)bestov.io> --- tools/testing/selftests/net/fcnal-test.sh | 36 +++++++++++++++++------ 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 75223b63e3c8..778288539879 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -1800,24 +1800,33 @@ ipv4_addr_bind_novrf() done # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${NSA_DEV} -b - log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after device bind" + run_cmd nettest -s -R -f -l ${a} -b + log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address" + + log_start + run_cmd nettest -s -f -l ${a} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address" + + # currently fails with ACCES + #log_start + #run_cmd nettest -s -D -P icmp -f -l ${a} -b + #log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address" # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -b + run_cmd nettest -s -D -P icmp -l ${a} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address" # @@ -1870,24 +1879,33 @@ ipv4_addr_bind_vrf() log_test_addr ${a} $? 1 "Raw socket bind to out of scope address after VRF bind" # - # raw socket with nonlocal bind + # tests for nonlocal bind # a=${NL_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -R -f -l ${a} -I ${VRF} -b log_test_addr ${a} $? 0 "Raw socket bind to nonlocal address after VRF bind" + log_start + run_cmd nettest -s -f -l ${a} -I ${VRF} -b + log_test_addr ${a} $? 0 "TCP socket bind to nonlocal address after VRF bind" + + # currently fails with ACCES + #log_start + #run_cmd nettest -s -D -P icmp -f -l ${a} -I ${VRF} -b + #log_test_addr ${a} $? 0 "ICMP socket bind to nonlocal address after VRF bind" + # # check that ICMP sockets cannot bind to broadcast and multicast addresses # a=${BCAST_IP} log_start - run_cmd nettest -s -R -P icmp -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to broadcast address after VRF bind" a=${MCAST_IP} log_start - run_cmd nettest -s -R -P icmp -f -l ${a} -I ${VRF} -b + run_cmd nettest -s -D -P icmp -l ${a} -I ${VRF} -b log_test_addr ${a} $? 1 "ICMP socket bind to multicast address after VRF bind" # -- 2.36.1

3 years

1
0
0 0

[PATCH 0/2] selftests/x86: AMX-related test improvements

by Chang S. Bae

A couple of test updates are included: * With this option [1,2], the kernel's altstack check becomes stringent. The x86 sigaltstack test is ignorant about this. Adjust the test now. This check was established [3] to ensure every AMX task's altstack is sufficient (regardless of that option) [4]. * The AMX test wrongly fails on non-AMX machines. Fix the code to skip the test instead. The series is available in this repository: git://github.com/intel/amx-linux.git selftest [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arc… [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Doc… [3] 3aac3ebea08f ("x86/signal: Implement sigaltstack size validation") [4] 4b7ca609a33d ("x86/signal: Use fpu::__state_user_size for sigalt stack validation") Chang S. Bae (2): selftests/x86/signal: Adjust the test to the kernel's altstack check selftests/x86/amx: Fix the test to avoid failure when AMX is unavailable tools/testing/selftests/x86/amx.c | 42 +++++++++++++++++------ tools/testing/selftests/x86/sigaltstack.c | 12 ++++++- 2 files changed, 42 insertions(+), 12 deletions(-) base-commit: f443e374ae131c168a065ea1748feac6b2e76613 -- 2.17.1

3 years

2
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror