- Linux-kselftest-mirror - lists.linaro.org

[PATCH net-next v7 0/8] Some pktgen fixes/improvments (part II)

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (now already applied to net-next) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() And part II (this one): - net: pktgen: use defines for the various dec/hex number parsing digits lengths - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen Regards, Peter Changes v6 -> v7: - rebased on actual net-next/main - selftest: net: add proc_net_pktgen - fixed conflict in tools/testing/selftests/net/config Changes v5 -> v6: - add rev-by Simon Horman - drop patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' - adjust to dropped patch ''net: pktgen: use defines for the various dec/hex number parsing digits lengths' - net: pktgen: fix mix of int/long - fix line break (suggested by Simon Horman) Changes v4 -> v5: - split up patchset into part i/ii (suggested by Simon Horman) - add rev-by Simon Horman - net: pktgen: align some variable declarations to the most common pattern -> net: pktgen: fix mix of int/long - instead of align to most common pattern (int) adjust all usages to size_t for i and max and ssize_t for len and adjust function signatures of hex32_arg(), count_trail_chars(), num_arg() and strn_len() accordingly - respect reverse xmas tree order for local variable declarations (where possible without too much code churn) - update subject line and patch description - dropped net: pktgen: hex32_arg/num_arg error out in case no characters are available - keep empty hex/num arg is implicit assumed as zero value - dropped net: pktgen: num_arg error out in case no valid character is parsed - keep empty hex/num arg is implicit assumed as zero value - Change patch description ('Fixes:' -> 'Addresses the following:', suggested by Simon Horman) - net: pktgen: remove all superfluous index assignements - new patch (suggested by Simon Horman) - selftest: net: add proc_net_pktgen - addapt to dropped patch 'net: pktgen: hex32_arg/num_arg error out in case no characters are available', empty hex/num arg is now implicit assumed as zero value (instead of failure) Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (8): net: pktgen: fix mix of int/long net: pktgen: remove extra tmp variable (re-use len instead) net: pktgen: remove some superfluous variable initializing net: pktgen: fix mpls maximum labels list parsing net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing net: pktgen: remove all superfluous index assignements selftest: net: add proc_net_pktgen net/core/pktgen.c | 288 ++++---- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 646 ++++++++++++++++++ 4 files changed, 805 insertions(+), 131 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

4 months

3
15
0 0

[PATCH][next] selftests/x86/xstate: Fix spelling mistake "hader" -> "header"

by Colin Ian King

There is a spelling mistake in a sig_print message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/x86/xstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/xstate.c b/tools/testing/selftests/x86/xstate.c index 875777911d82..23c1d6c964ea 100644 --- a/tools/testing/selftests/x86/xstate.c +++ b/tools/testing/selftests/x86/xstate.c @@ -391,7 +391,7 @@ static void validate_sigfpstate(int sig, siginfo_t *si, void *ctx_void) if (get_xstatebv(xbuf) & xstate.mask) sig_print("[OK]\t'xfeatures' in XSAVE header is valid\n"); else - sig_print("[FAIL]\t'xfeatures' in XSAVE hader is not valid\n"); + sig_print("[FAIL]\t'xfeatures' in XSAVE header is not valid\n"); if (validate_xstate_same(stashed_xbuf, xbuf)) sig_print("[OK]\txstate delivery was successful\n"); -- 2.47.2

4 months

1
0
0 0

[PATCH sysctl-next v2] selftests/sysctl: fix wording of help messages

by Bharadwaj Raju

Fix grammar such as "number amount of times is recommended" etc -> "the recommended number of times". Signed-off-by: Bharadwaj Raju <bharadwaj.raju777(a)gmail.com> --- tools/testing/selftests/sysctl/sysctl.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index f6e129a82ffd..db1616857d89 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -857,7 +857,7 @@ list_tests() echo echo "TEST_ID x NUM_TEST" echo "TEST_ID: Test ID" - echo "NUM_TESTS: Number of recommended times to run the test" + echo "NUM_TESTS: Recommended number of times to run the test" echo echo "0001 x $(get_test_count 0001) - tests proc_dointvec_minmax()" echo "0002 x $(get_test_count 0002) - tests proc_dostring()" @@ -884,7 +884,7 @@ usage() echo "Valid tests: 0001-$MAX_TEST" echo "" echo " all Runs all tests (default)" - echo " -t Run test ID the number amount of times is recommended" + echo " -t Run test ID the recommended number of times" echo " -w Watch test ID run until it runs into an error" echo " -c Run test ID once" echo " -s Run test ID x test-count number of times" @@ -898,7 +898,7 @@ usage() echo Example uses: echo echo "$TEST_NAME.sh -- executes all tests" - echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recommended" + echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 the recommended number of times" echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs" echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once" echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times" -- 2.48.1

4 months

2
1
0 0

[PATCH net-next 0/2] expand cmsg_ipv6.sh with ipv4 support

by Willem de Bruijn

From: Willem de Bruijn <willemb(a)google.com> Expand IPV6_TCLASS to also cover IP_TOS. Expand IPV6_HOPLIMIT to also cover IP_TTL. A series of two patches for basic readability (patch 1 is a noop), and so that git does not interpret code changes + file rename as a whole file del + add. Willem de Bruijn (2): selftests/net: prepare cmsg_ipv6.sh for ipv4 selftests/net: expand cmsg_ipv6.sh with ipv4 tools/testing/selftests/net/Makefile | 2 +- tools/testing/selftests/net/cmsg_ip.sh | 184 ++++++++++++++++++++++ tools/testing/selftests/net/cmsg_ipv6.sh | 154 ------------------ tools/testing/selftests/net/cmsg_sender.c | 90 +++++++---- 4 files changed, 240 insertions(+), 190 deletions(-) create mode 100755 tools/testing/selftests/net/cmsg_ip.sh delete mode 100755 tools/testing/selftests/net/cmsg_ipv6.sh -- 2.48.1.658.g4767266eb4-goog

4 months

2
3
0 0

[PATCH V2 0/3] selftests: add ublk selftests

by Ming Lei

Hello Guys, The 1st patch adds one ublk utility and one entry test. The 2nd patch adds test over file backed ublk. The 3rd patch adds test for ublk zero copy. How to run: - make install - make headers_install INSTALL_HDR_PATH=/usr # in case UAPI is changed - reboot - make -C tools/testing/selftests TARGETS=ublk run_test Thanks, V2: - fix one sqe allocation bug, so ublk zero copy with io_link can pass - dump log in case of error - add one more test for mkfs/mount on zero copy Ming Lei (3): selftests: ublk: add kernel selftests for ublk selftests: ublk: add file backed ublk selftests: ublk: add ublk zero copy test MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/ublk/.gitignore | 3 + tools/testing/selftests/ublk/Makefile | 15 + tools/testing/selftests/ublk/config | 1 + tools/testing/selftests/ublk/kublk.c | 1679 ++++++++++++++++++ tools/testing/selftests/ublk/test_common.sh | 112 ++ tools/testing/selftests/ublk/test_loop_01.sh | 30 + tools/testing/selftests/ublk/test_loop_02.sh | 21 + tools/testing/selftests/ublk/test_loop_03.sh | 32 + tools/testing/selftests/ublk/test_loop_04.sh | 21 + tools/testing/selftests/ublk/test_null_01.sh | 18 + 12 files changed, 1934 insertions(+) create mode 100644 tools/testing/selftests/ublk/.gitignore create mode 100644 tools/testing/selftests/ublk/Makefile create mode 100644 tools/testing/selftests/ublk/config create mode 100644 tools/testing/selftests/ublk/kublk.c create mode 100755 tools/testing/selftests/ublk/test_common.sh create mode 100755 tools/testing/selftests/ublk/test_loop_01.sh create mode 100755 tools/testing/selftests/ublk/test_loop_02.sh create mode 100755 tools/testing/selftests/ublk/test_loop_03.sh create mode 100755 tools/testing/selftests/ublk/test_loop_04.sh create mode 100755 tools/testing/selftests/ublk/test_null_01.sh -- 2.47.0

4 months

2
5
0 0

[PATCH v2] selftests/vDSO: fix GNU hash table entry size for s390x

by Thomas Weißschuh

Commit 14be4e6f3522 ("selftests: vDSO: fix ELF hash table entry size for s390x") changed the type of the ELF hash table entries to 64bit on s390x. However the *GNU* hash tables entries are always 32bit. The "bucket" pointer is shared between both hash algorithms. On s390x the GNU algorithm assigns and dereferences this pointer to a 64bit value as a pointer to a 32bit value, leading to compiler warnings and runtime crashes. Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash. Fixes: e0746bde6f82 ("selftests/vDSO: support DT_GNU_HASH") Reviewed-by: Jens Remus <jremus(a)linux.ibm.com> Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v2: - Fix wording around the width of pointers vs the pointed-to values - Link to v1: https://lore.kernel.org/r/20250213-selftests-vdso-s390-gnu-hash-v1-1-ace3bc… --- tools/testing/selftests/vDSO/parse_vdso.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/vDSO/parse_vdso.c b/tools/testing/selftests/vDSO/parse_vdso.c index 2fe5e983cb22f1ed066d0310a54f6aef2ed77ed8..f89d052c730eb43eea28d69ca27b56e897503e16 100644 --- a/tools/testing/selftests/vDSO/parse_vdso.c +++ b/tools/testing/selftests/vDSO/parse_vdso.c @@ -53,7 +53,7 @@ static struct vdso_info /* Symbol table */ ELF(Sym) *symtab; const char *symstrings; - ELF(Word) *gnu_hash; + ELF(Word) *gnu_hash, *gnu_bucket; ELF_HASH_ENTRY *bucket, *chain; ELF_HASH_ENTRY nbucket, nchain; @@ -185,8 +185,8 @@ void vdso_init_from_sysinfo_ehdr(uintptr_t base) /* The bucket array is located after the header (4 uint32) and the bloom * filter (size_t array of gnu_hash[2] elements). */ - vdso_info.bucket = vdso_info.gnu_hash + 4 + - sizeof(size_t) / 4 * vdso_info.gnu_hash[2]; + vdso_info.gnu_bucket = vdso_info.gnu_hash + 4 + + sizeof(size_t) / 4 * vdso_info.gnu_hash[2]; } else { vdso_info.nbucket = hash[0]; vdso_info.nchain = hash[1]; @@ -268,11 +268,11 @@ void *vdso_sym(const char *version, const char *name) if (vdso_info.gnu_hash) { uint32_t h1 = gnu_hash(name), h2, *hashval; - i = vdso_info.bucket[h1 % vdso_info.nbucket]; + i = vdso_info.gnu_bucket[h1 % vdso_info.nbucket]; if (i == 0) return 0; h1 |= 1; - hashval = vdso_info.bucket + vdso_info.nbucket + + hashval = vdso_info.gnu_bucket + vdso_info.nbucket + (i - vdso_info.gnu_hash[1]); for (;; i++) { ELF(Sym) *sym = &vdso_info.symtab[i]; --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20250213-selftests-vdso-s390-gnu-hash-7206671abc85 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

4 months, 1 week

3
3
0 0

[PATCH v2 0/2] tools/nolibc: add support for [v]sscanf()

by Thomas Weißschuh

The implementation is limited and only supports numeric arguments. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Return __LINE__ from different testcases to directly point to the failed testcase - Add some comments - Expand commit message - Link to v1: https://lore.kernel.org/r/20240731-nolibc-scanf-v1-0-f71bcc4abb9e@weissschu… --- Thomas Weißschuh (2): tools/nolibc: add support for [v]sscanf() Revert "selftests: kselftest: Fix build failure with NOLIBC" tools/include/nolibc/stdio.h | 98 ++++++++++++++++++++++++++++ tools/testing/selftests/kselftest.h | 5 -- tools/testing/selftests/nolibc/nolibc-test.c | 68 +++++++++++++++++++ 3 files changed, 166 insertions(+), 5 deletions(-) --- base-commit: 665fa8dea90d9fbc0e7137c7e1315d6f7e15757e change-id: 20240414-nolibc-scanf-f1db6930d0c6 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

4 months, 1 week

3
4
0 0

[PATCH v8 0/8] Buddy allocator like (or non-uniform) folio split

by Zi Yan

Hi all, This patchset adds a new buddy allocator like (or non-uniform) large folio split from a order-n folio to order-m with m < n. It reduces 1. the total number of after-split folios from 2^(n-m) to n-m+1; 2. the amount of memory needed for multi-index xarray split from 2^(n/6-m/6) to n/6-m/6, assuming XA_CHUNK_SHIFT=6; 3. keep more large folios after a split from all order-m folios to order-(n-1) to order-m folios. For example, to split an order-9 to order-0, folio split generates 10 (or 11 for anonymous memory) folios instead of 512, allocates 1 xa_node instead of 8, and leaves 1 order-8, 1 order-7, ..., 1 order-1 and 2 order-0 folios (or 4 order-0 for anonymous memory) instead of 512 order-0 folios. It is on top of mm-everything-2025-02-15-05-49 with V7 reverted. It is ready to be merged. Instead of duplicating existing split_huge_page*() code, __folio_split() is introduced as the shared backend code for both split_huge_page_to_list_to_order() and folio_split(). __folio_split() can support both uniform split and buddy allocator like (or non-uniform) split. All existing split_huge_page*() users can be gradually converted to use folio_split() if possible. In this patchset, I converted truncate_inode_partial_folio() to use folio_split(). xfstests quick group passed for both tmpfs and xfs. Changelog === From V7[9]: 1. Fixed a wrong function name in lib/test_xarray.c. 2. Made __split_folio_to_order() never fail, since the old order check is already done in __folio_split(). (per David Hildenbrand) 3. Fixed an issue reported by syzbot[10] by not dropping the original folio during truncate. 4. Fixed a WARNING when READ_ONLY_THP_FOR_FS is enabled. (Thank David Hildenbrand for reporting the issue) 5. Used two separate struct page* parameters, split_at and lock_at, to specify at which subpage the non-uniform split happens and which subpage to keep locked after the split, respectively. It improves code readability. From V6[8]: 1. Added an xarray function xas_try_split() to support iterative folio split, removing the need of using xas_split_alloc() and xas_split(). The function guarantees that at most one xa_node is allocated for each call. 2. Added concrete numbers of after-split folios and xa_node savings to cover letter, commit log. (per Andrew) From V5[7]: 1. Split shmem to any lower order patches are in mm tree, so dropped from this series. 2. Rename split_folio_at() to try_folio_split() to clarify that non-uniform split will not be used if it is not supported. From V4[6]: 1. Enabled shmem support in both uniform and buddy allocator like split and added selftests for it. 2. Added functions to check if uniform split and buddy allocator like split are supported for the given folio and order. 3. Made truncate fall back to uniform split if buddy allocator split is not supported (CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio). 4. Added the missing folio_clear_has_hwpoisoned() to __split_unmapped_folio(). From V3[5]: 1. Used xas_split_alloc(GFP_NOWAIT) instead of xas_nomem(), since extra operations inside xas_split_alloc() are needed for correctness. 2. Enabled folio_split() for shmem and no issue was found with xfstests quick test group. 3. Split both ends of a truncate range in truncate_inode_partial_folio() to avoid wasting memory in shmem truncate (per David Hildenbrand). 4. Removed page_in_folio_offset() since page_folio() does the same thing. 5. Finished truncate related tests from xfstests quick test group on XFS and tmpfs without issues. 6. Disabled buddy allocator like split on CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio. This check was missed in the prior versions. From V2[3]: 1. Incorporated all the feedback from Kirill[4]. 2. Used GFP_NOWAIT for xas_nomem(). 3. Tested the code path when xas_nomem() fails. 4. Added selftests for folio_split(). 5. Fixed no THP config build error. From V1[2]: 1. Split the original patch 1 into multiple ones for easy review (per Kirill). 2. Added xas_destroy() to avoid memory leak. 3. Fixed nr_dropped not used error (per kernel test robot). 4. Added proper error handling when xas_nomem() fails to allocate memory for xas_split() during buddy allocator like split. From RFC[1]: 1. Merged backend code of split_huge_page_to_list_to_order() and folio_split(). The same code is used for both uniform split and buddy allocator like split. 2. Use xas_nomem() instead of xas_split_alloc() for folio_split(). 3. folio_split() now leaves the first after-split folio unlocked, instead of the one containing the given page, since the caller of truncate_inode_partial_folio() locks and unlocks the first folio. 4. Extended split_huge_page debugfs to use folio_split(). 5. Added truncate_inode_partial_folio() as first user of folio_split(). Design === folio_split() splits a large folio in the same way as buddy allocator splits a large free page for allocation. The purpose is to minimize the number of folios after the split. For example, if user wants to free the 3rd subpage in a order-9 folio, folio_split() will split the order-9 folio as: O-0, O-0, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-8 if it is anon O-1, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-9 if it is pagecache Since anon folio does not support order-1 yet. The split process is similar to existing approach: 1. Unmap all page mappings (split PMD mappings if exist); 2. Split meta data like memcg, page owner, page alloc tag; 3. Copy meta data in struct folio to sub pages, but instead of spliting the whole folio into multiple smaller ones with the same order in a shot, this approach splits the folio iteratively. Taking the example above, this approach first splits the original order-9 into two order-8, then splits left part of order-8 to two order-7 and so on; 4. Post-process split folios, like write mapping->i_pages for pagecache, adjust folio refcounts, add split folios to corresponding list; 5. Remap split folios 6. Unlock split folios. __split_unmapped_folio() and __split_folio_to_order() replace __split_huge_page() and __split_huge_page_tail() respectively. __split_unmapped_folio() uses different approaches to perform uniform split and buddy allocator like split: 1. uniform split: one single call to __split_folio_to_order() is used to uniformly split the given folio. All resulting folios are put back to the list after split. The folio containing the given page is left to caller to unlock and others are unlocked. 2. buddy allocator like (or non-uniform) split: (old_order - new_order) calls to __split_folio_to_order() are used to split the given folio at order N to order N-1. After each call, the target folio is changed to the one containing the page, which is given as a folio_split() parameter. After each call, folios not containing the page are put back to the list. The folio containing the page is put back to the list when its order is new_order. All folios are unlocked except the first folio, which is left to caller to unlock. Patch Overview === 1. Patch 1 added a new xarray function xas_try_split() to perform iterative xarray split. 2. Patch 2 added __split_unmapped_folio() and __split_folio_to_order() to prepare for moving to new backend split code. 3. Patch 3 moved common code in split_huge_page_to_list_to_order() to __folio_split(). 4. Patch 4 added new folio_split() and made split_huge_page_to_list_to_order() share the new __split_unmapped_folio() with folio_split(). 5. Patch 5 removed no longer used __split_huge_page() and __split_huge_page_tail(). 6. Patch 6 added a new in_folio_offset to split_huge_page debugfs for folio_split() test. 7. Patch 7 used try_folio_split() for truncate operation. 8. Patch 8 added folio_split() tests. Any comments and/or suggestions are welcome. Thanks. [1] https://lore.kernel.org/linux-mm/20241008223748.555845-1-ziy@nvidia.com/ [2] https://lore.kernel.org/linux-mm/20241028180932.1319265-1-ziy@nvidia.com/ [3] https://lore.kernel.org/linux-mm/20241101150357.1752726-1-ziy@nvidia.com/ [4] https://lore.kernel.org/linux-mm/e6ppwz5t4p4kvir6eqzoto4y5fmdjdxdyvxvtw43nc… [5] https://lore.kernel.org/linux-mm/20241205001839.2582020-1-ziy@nvidia.com/ [6] https://lore.kernel.org/linux-mm/20250106165513.104899-1-ziy@nvidia.com/ [7] https://lore.kernel.org/linux-mm/20250116211042.741543-1-ziy@nvidia.com/ [8] https://lore.kernel.org/linux-mm/20250205031417.1771278-1-ziy@nvidia.com/ [9] https://lore.kernel.org/linux-mm/20250211155034.268962-1-ziy@nvidia.com/ [10] https://lore.kernel.org/all/67af65cb.050a0220.21dd3.004a.GAE@google.com/ Zi Yan (8): xarray: add xas_try_split() to split a multi-index entry mm/huge_memory: add two new (not yet used) functions for folio_split() mm/huge_memory: move folio split common code to __folio_split() mm/huge_memory: add buddy allocator like (non-uniform) folio_split() mm/huge_memory: remove the old, unused __split_huge_page() mm/huge_memory: add folio_split() to debugfs testing interface mm/truncate: use buddy allocator like folio split for truncate operation selftests/mm: add tests for folio_split(), buddy allocator like split Documentation/core-api/xarray.rst | 14 +- include/linux/huge_mm.h | 36 + include/linux/xarray.h | 7 + lib/test_xarray.c | 47 ++ lib/xarray.c | 138 +++- mm/huge_memory.c | 756 ++++++++++++------ mm/truncate.c | 31 +- tools/testing/radix-tree/Makefile | 1 + .../selftests/mm/split_huge_page_test.c | 34 +- 9 files changed, 783 insertions(+), 281 deletions(-) -- 2.47.2

4 months, 1 week

2
12
0 0

[PATCH] selftests/ftrace: Use readelf to find entry point in uprobe test

by Heiko Carstens

The uprobe events test fails on s390, but also on x86 (Fedora 41). The problem appears to be that there is an assumption that adding a uprobe to the beginning of the executable mapping of /bin/sh is sufficient to trigger a uprobe event when /bin/sh is executed. This assumption is not necessarily true. Therefore use "readelf -h" to find the entry point address of /bin/sh and use this address when adding the uprobe event. This adds a dependency to readelf which is not always installed. Therefore add a check and exit with exit_unresolved if it is not installed. Signed-off-by: Heiko Carstens <hca(a)linux.ibm.com> --- .../ftrace/test.d/dynevent/add_remove_uprobe.tc | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc index 86c76679c56e..f2048c244526 100644 --- a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc +++ b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc @@ -3,14 +3,18 @@ # description: Generic dynamic event - add/remove/test uprobe events # requires: uprobe_events +if ! which readelf > /dev/null 2>&1 ; then + echo "No readelf found. skipped." + exit_unresolved +fi + echo 0 > events/enable echo > dynamic_events REALBIN=`readlink -f /bin/sh` +ENTRYPOINT=`readelf -h ${REALBIN} | grep Entry | sed -e 's/[^0]*//'` -echo 'cat /proc/$$/maps' | /bin/sh | \ - grep "r-xp .*${REALBIN}$" | \ - awk '{printf "p:myevent %s:0x%s\n", $6,$3 }' >> uprobe_events +echo "p:myevent ${REALBIN}:${ENTRYPOINT}" >> uprobe_events grep -q myevent uprobe_events test -d events/uprobes/myevent -- 2.45.2

4 months, 1 week

3
2
0 0

[PATCH bpf-next v3 0/6] XDP metadata support for tun driver

by Marcus Wichelmann

Hi, thank you for your reviw. As promised, here is V3 of this patch series. I noticed that the updated selftests were flaky sometimes due to the kernel networking stack sending IPv6 multicast listener reports on the created test interfaces. This can be seen here: https://github.com/kernel-patches/bpf/actions/runs/13449071153/job/37580497… Setting the NOARP flag on the interfaces should fix this race condition. Successful pipeline: https://github.com/kernel-patches/bpf/actions/runs/13500667544 Signed-off-by: Marcus Wichelmann <marcus.wichelmann(a)hetzner-cloud.de> Acked-by: Jason Wang <jasowang(a)redhat.com> Reviewed-by: Willem de Bruijn <willemb(a)google.com> --- v3: - change the condition to handle xdp_buffs without metadata support, as suggested by Willem de Bruijn <willemb(a)google.com> - add clarifying comment why that condition is needed - set NOARP flag in selftests to ensure that the kernel does not send packets on the test interfaces that may interfere with the tests v2: https://lore.kernel.org/bpf/20250217172308.3291739-1-marcus.wichelmann@hetz… - submit against bpf-next subtree - split commits and improved commit messages - remove redundant metasize check and add clarifying comment instead - use max() instead of ternary operator - add selftest for metadata support in the tun driver v1: https://lore.kernel.org/all/20250130171614.1657224-1-marcus.wichelmann@hetz… Marcus Wichelmann (6): net: tun: enable XDP metadata support net: tun: enable transfer of XDP metadata to skb selftests/bpf: move open_tuntap to network helpers selftests/bpf: refactor xdp_context_functional test and bpf program selftests/bpf: add test for XDP metadata support in tun driver selftests/bpf: fix file descriptor assertion in open_tuntap helper drivers/net/tun.c | 28 ++- tools/testing/selftests/bpf/network_helpers.c | 28 +++ tools/testing/selftests/bpf/network_helpers.h | 3 + .../selftests/bpf/prog_tests/lwt_helpers.h | 29 ---- .../bpf/prog_tests/xdp_context_test_run.c | 163 ++++++++++++++++-- .../selftests/bpf/progs/test_xdp_meta.c | 56 +++--- 6 files changed, 230 insertions(+), 77 deletions(-) -- 2.43.0

4 months, 1 week

4
26
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror