- Linux-kselftest-mirror - lists.linaro.org

[PATCH v7 00/10] Basic SEV-SNP Selftests

by Pratik R. Sampat

This patch series extends the sev_init2 and the sev_smoke test to exercise the SEV-SNP VM launch workflow. Primarily, it introduces the architectural defines, its support in the SEV library and extends the tests to interact with the SEV-SNP ioctl() wrappers. Patch 1 - Do not advertize SNP on initialization failure Patch 2 - SNP test for KVM_SEV_INIT2 Patch 3 - Add vmgexit helper Patch 4 - Add SMT control interface helper Patch 5 - Replace assert() with TEST_ASSERT_EQ() Patch 6 - Introduce SEV+ VM type check Patch 7 - SNP iotcl() plumbing for the SEV library Patch 8 - Force set GUEST_MEMFD for SNP Patch 9 - Cleanups of smoke test - Decouple policy from type Patch 10 - SNP smoke test The series is based on git.kernel.org/pub/scm/virt/kvm/kvm.git next v6..v7: Based on comments from Sean - * Replaced FW check with sev->snp_initialized * Dropped the patch which removes SEV+ KVM advertizement if INIT fails. This should be now be resolved by the combination of the patches [1,2] from Ashish. * Change vmgexit to an inline function * Export SMT control parsing interface to kvm_util Note: hyperv_cpuid KST only compile testeworkbench.editor.empty.hintd * Replace assert() with TEST_ASSERT_EQ() within SEV library * Define KVM_SEV_PAGE_TYPE_INVALID for SEV call of encrypt_region() * Parameterize encrypt_region() to include privatize_region() * Deduplication of sev test calls between SEV,SEV-ES and SNP * Removed FW version tests for SNP * Included testing of SNP_POLICY_DBG * Dropped most tags from patches that have been changed or indirectly affected [1] https://lore.kernel.org/all/d6d08c6b-9602-4f3d-92c2-8db6d50a1b92@amd.com [2] https://lore.kernel.org/all/f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.173922… v5..v6: https://lore.kernel.org/kvm/ab433246-e97c-495b-ab67-b0cb1721fb99@amd.com/ * Rename is_sev_platform_init to sev_fw_initialized (Nikunj) * Rename KVM CPU feature X86_FEATURE_SNP to X86_FEATURE_SEV_SNP (Nikunj) * Collected Tags from Nikunj, Pankaj, Srikanth. v4..v5: https://lore.kernel.org/kvm/8e7d8172-879e-4a28-8438-343b1c386ec9@amd.com/ * Introduced a check to disable advertising support for SEV, SEV-ES and SNP when platform initialization fails (Nikunj) * Remove the redundant SNP check within is_sev_vm() (Nikunj) * Cleanup of the encrypt_region flow for better readability (Nikunj) * Refactor paths to use the canonical $(ARCH) to rebase for kvm/next v3..v4: https://lore.kernel.org/kvm/20241114234104.128532-1-pratikrajesh.sampat@amd… * Remove SNP FW API version check in the test and ensure the KVM capability advertizes the presence of the feature. Retain the minimum version definitions to exercise these API versions in the smoke test * Retained only the SNP smoke test and SNP_INIT2 test * The SNP architectural defined merged with SNP_INIT2 test patch * SNP shutdown merged with SNP smoke test patch * Add SEV VM type check to abstract comparisons and reduce clutter * Define a SNP default policy which sets bits based on the presence of SMT * Decouple privatization and encryption for it to be SNP agnostic * Assert for only positive tests using vm_ioctl() * Dropped tested-by tags In summary - based on comments from Sean, I have primarily reduced the scope of this patch series to focus on breaking down the SNP smoke test patch (v3 - patch2) to first introduce SEV-SNP support and use this interface to extend the sev_init2 and the sev_smoke test. The rest of the v3 patchset that introduces ioctl, pre fault, fallocate and negative tests, will be re-worked and re-introduced subsequently in future patch series post addressing the issues discussed. v2..v3: https://lore.kernel.org/kvm/20240905124107.6954-1-pratikrajesh.sampat@amd.c… * Remove the assignments for the prefault and fallocate test type enums. * Fix error message for sev launch measure and finish. * Collect tested-by tags [Peter, Srikanth]](<This patch series extends the sev_init2 and the sev_smoke test to exercise the SEV-SNP VM launch workflow. Primarily, it introduces the architectural defines, its support in the SEV library and extends the tests to interact with the SEV-SNP ioctl() wrappers. Patch 1 - Do not advertize SNP on initialization failure Patch 2 - SNP test for KVM_SEV_INIT2 Patch 3 - Add vmgexit helper Patch 4 - Helper for SMT control interface Patch 5 - Replace assert() with TEST_ASSERT_EQ() Patch 6 - Introduce SEV+ VM type check Patch 7 - SNP iotcl() plumbing for the SEV library Patch 8 - Force set GUEST_MEMFD for SNP Patch 9 - Cleanups of smoke test - Decouple policy from type Patch 10 - SNP smoke test The series is based on git.kernel.org/pub/scm/virt/kvm/kvm.git next v6..v7 Based on comments from Sean - * Replaced FW check with sev-%3Esnp_initialized * Dropped the patch which removes SEV+ KVM advertizement if INIT fails This should be resolved by the combination of [1][2] from Ashish: * Change vmgexit to an inline function * Export SMT control parsing interface to kvm_util * Replace assert() with TEST_ASSERT_EQ() within SEV library * Define KVM_SEV_PAGE_TYPE_INVALID for SEV to use it with encrypt_region() * Parameterize encrypt_region() to include privatize_region() functionality * Deduplication of sev test calls between SEV,SEV-ES and SNP * Removed FW version tests for SNP * Included testing of SNP_POLICY_DBG * Dropped most tags from patches that have directly / indirectly changed. [1] https://lore.kernel.org/all/d6d08c6b-9602-4f3d-92c2-8db6d50a1b92@amd.com [2] https://lore.kernel.org/all/f78ddb64087df27e7bcb1ae0ab53f55aa0804fab.173922… v5..v6 https://lore.kernel.org/kvm/ab433246-e97c-495b-ab67-b0cb1721fb99@amd.com/ * Rename is_sev_platform_init to sev_fw_initialized (Nikunj) * Rename KVM CPU feature X86_FEATURE_SNP to X86_FEATURE_SEV_SNP (Nikunj) * Collected Tags from Nikunj, Pankaj, Srikanth. v4..v5: https://lore.kernel.org/kvm/8e7d8172-879e-4a28-8438-343b1c386ec9@amd.com/ * Introduced a check to disable advertising support for SEV, SEV-ES and SNP when platform initialization fails (Nikunj) * Remove the redundant SNP check within is_sev_vm() (Nikunj) * Cleanup of the encrypt_region flow for better readability (Nikunj) * Refactor paths to use the canonical $(ARCH) to rebase for kvm/next v3..v4: https://lore.kernel.org/kvm/20241114234104.128532-1-pratikrajesh.sampat@amd… * Remove SNP FW API version check in the test and ensure the KVM capability advertizes the presence of the feature. Retain the minimum version definitions to exercise these API versions in the smoke test * Retained only the SNP smoke test and SNP_INIT2 test * The SNP architectural defined merged with SNP_INIT2 test patch * SNP shutdown merged with SNP smoke test patch * Add SEV VM type check to abstract comparisons and reduce clutter * Define a SNP default policy which sets bits based on the presence of SMT * Decouple privatization and encryption for it to be SNP agnostic * Assert for only positive tests using vm_ioctl() * Dropped tested-by tags In summary - based on comments from Sean, I have primarily reduced the scope of this patch series to focus on breaking down the SNP smoke test patch (v3 - patch2) to first introduce SEV-SNP support and use this interface to extend the sev_init2 and the sev_smoke test. The rest of the v3 patchset that introduces ioctl, pre fault, fallocate and negative tests, will be re-worked and re-introduced subsequently in future patch series post addressing the issues discussed. v2..v3: https://lore.kernel.org/kvm/20240905124107.6954-1-pratikrajesh.sampat@amd.c… * Remove the assignments for the prefault and fallocate test type enums. * Fix error message for sev launch measure and finish. * Collect tested-by tags [Peter, Srikanth] Pratik R. Sampat (10): KVM: SEV: Disable SEV-SNP support on initialization failure KVM: selftests: SEV-SNP test for KVM_SEV_INIT2 KVM: selftests: Add vmgexit helper KVM: selftests: Add SMT control state helper KVM: selftests: Replace assert() with TEST_ASSERT_EQ() KVM: selftests: Introduce SEV VM type check KVM: selftests: Add library support for interacting with SNP KVM: selftests: Force GUEST_MEMFD flag for SNP VM type KVM: selftests: Abstractions for SEV to decouple policy from type KVM: selftests: Add a basic SEV-SNP smoke test arch/x86/include/uapi/asm/kvm.h | 1 + arch/x86/kvm/svm/sev.c | 4 +- drivers/crypto/ccp/sev-dev.c | 8 ++ include/linux/psp-sev.h | 3 + tools/arch/x86/include/uapi/asm/kvm.h | 1 + .../testing/selftests/kvm/include/kvm_util.h | 35 +++++++ .../selftests/kvm/include/x86/processor.h | 1 + tools/testing/selftests/kvm/include/x86/sev.h | 42 ++++++++- tools/testing/selftests/kvm/lib/kvm_util.c | 7 +- .../testing/selftests/kvm/lib/x86/processor.c | 4 +- tools/testing/selftests/kvm/lib/x86/sev.c | 93 +++++++++++++++++-- .../testing/selftests/kvm/x86/hyperv_cpuid.c | 19 ---- .../selftests/kvm/x86/sev_init2_tests.c | 13 +++ .../selftests/kvm/x86/sev_smoke_test.c | 75 +++++++++------ 14 files changed, 246 insertions(+), 60 deletions(-) -- 2.43.0

4 months, 1 week

3
17
0 0

[PATCH v7 00/14] iommufd: Add vIOMMU infrastructure (Part-3: vEVENTQ)

by Nicolin Chen

As the vIOMMU infrastructure series part-3, this introduces a new vEVENTQ object. The existing FAULT object provides a nice notification pathway to the user space with a queue already, so let vEVENTQ reuse that. Mimicing the HWPT structure, add a common EVENTQ structure to support its derivatives: IOMMUFD_OBJ_FAULT (existing) and IOMMUFD_OBJ_VEVENTQ (new). An IOMMUFD_CMD_VEVENTQ_ALLOC is introduced to allocate vEVENTQ object for vIOMMUs. One vIOMMU can have multiple vEVENTQs in different types but can not support multiple vEVENTQs in the same type. The forwarding part is fairly simple but might need to replace a physical device ID with a virtual device ID in a driver-level event data structure. So, this also adds some helpers for drivers to use. As usual, this series comes with the selftest coverage for this new ioctl and with a real world use case in the ARM SMMUv3 driver. This is on Github: https://github.com/nicolinc/iommufd/commits/iommufd_veventq-v7 Paring QEMU branch for testing: https://github.com/nicolinc/qemu/commits/wip/for_iommufd_veventq-v7 Changelog v7 * Rebase on Jason's for-next tree for latest fault.c * Add Reviewed-by * Update commit logs * Add __reserved field sanity * Skip kfree() on the static header * Replace "bool on_list" with list_is_last() * Use u32 for flags in iommufd_vevent_header * Drop casting in iommufd_viommu_get_vdev_id() * Update the bounding logic to veventq->sequence * Add missing cpu_to_le64() around STRTAB_STE_1_MEV * Reuse veventq->common.lock to fence sequence and num_events * Rename overflow to lost_events and log it in upon kmalloc failure * Correct the error handling part in iommufd_veventq_deliver_fetch() * Add an arm_smmu_clear_vmaster() to simplify identity/blocked domain attach ops * Add additional four event records to forward to user space VM, and update the uAPI doc * Reuse the existing smmu->streams_mutex lock to fence master->vmaster pointer, instead of adding a new rwsem v6 https://lore.kernel.org/all/cover.1737754129.git.nicolinc@nvidia.com/ * Drop supports_veventq viommu op * Split bug/cosmetics fixes out of the series * Drop the blocking mutex around copy_to_user() * Add veventq_depth in uAPI to limit vEVENTQ size * Revise the documentation for a clear description * Fix sparse warnings in arm_vmaster_report_event() * Rework iommufd_viommu_get_vdev_id() to return -ENOENT v.s. 0 * Allow Abort/Bypass STEs to allocate vEVENTQ and set STE.MEV for DoS mitigations v5 https://lore.kernel.org/all/cover.1736237481.git.nicolinc@nvidia.com/ * Add Reviewed-by from Baolu * Reorder the OBJ list as well * Fix alphabetical order after renaming in v4 * Add supports_veventq viommu op for vEVENTQ type validation v4 https://lore.kernel.org/all/cover.1735933254.git.nicolinc@nvidia.com/ * Rename "vIRQ" to "vEVENTQ" * Use flexible array in struct iommufd_vevent * Add the new ioctl command to union ucmd_buffer * Fix the alphabetical order in union ucmd_buffer too * Rename _TYPE_NONE to _TYPE_DEFAULT aligning with vIOMMU naming v3 https://lore.kernel.org/all/cover.1734477608.git.nicolinc@nvidia.com/ * Rebase on Will's for-joerg/arm-smmu/updates for arm_smmu_event series * Add "Reviewed-by" lines from Kevin * Fix typos in comments, kdocs, and jump tags * Add a patch to sort struct iommufd_ioctl_op * Update iommufd's userpsace-api documentation * Update uAPI kdoc to quote SMMUv3 offical spec * Drop the unused workqueue in struct iommufd_virq * Drop might_sleep() in iommufd_viommu_report_irq() helper * Add missing "break" in iommufd_viommu_get_vdev_id() helper * Shrink the scope of the vmaster's read lock in SMMUv3 driver * Pass in two arguments to iommufd_eventq_virq_handler() helper * Move "!ops || !ops->read" validation into iommufd_eventq_init() * Move "fault->ictx = ictx" closer to iommufd_ctx_get(fault->ictx) * Update commit message for arm_smmu_attach_prepare/commit_vmaster() * Keep "iommufd_fault" as-is and rename "iommufd_eventq_virq" to just "iommufd_virq" v2 https://lore.kernel.org/all/cover.1733263737.git.nicolinc@nvidia.com/ * Rebase on v6.13-rc1 * Add IOPF and vIRQ in iommufd.rst (userspace-api) * Add a proper locking in iommufd_event_virq_destroy * Add iommufd_event_virq_abort with a lockdep_assert_held * Rename "EVENT_*" to "EVENTQ_*" to describe the objects better * Reorganize flows in iommufd_eventq_virq_alloc for abort() to work * Adde struct arm_smmu_vmaster to store vSID upon attaching to a nested domain, calling a newly added iommufd_viommu_get_vdev_id helper * Adde an arm_vmaster_report_event helper in arm-smmu-v3-iommufd file to simplify the routine in arm_smmu_handle_evt() of the main driver v1 https://lore.kernel.org/all/cover.1724777091.git.nicolinc@nvidia.com/ Thanks! Nicolin Nicolin Chen (14): iommufd/fault: Move two fault functions out of the header iommufd/fault: Add an iommufd_fault_init() helper iommufd: Abstract an iommufd_eventq from iommufd_fault iommufd: Rename fault.c to eventq.c iommufd: Add IOMMUFD_OBJ_VEVENTQ and IOMMUFD_CMD_VEVENTQ_ALLOC iommufd/viommu: Add iommufd_viommu_get_vdev_id helper iommufd/viommu: Add iommufd_viommu_report_event helper iommufd/selftest: Require vdev_id when attaching to a nested domain iommufd/selftest: Add IOMMU_TEST_OP_TRIGGER_VEVENT for vEVENTQ coverage iommufd/selftest: Add IOMMU_VEVENTQ_ALLOC test coverage Documentation: userspace-api: iommufd: Update FAULT and VEVENTQ iommu/arm-smmu-v3: Introduce struct arm_smmu_vmaster iommu/arm-smmu-v3: Report events that belong to devices attached to vIOMMU iommu/arm-smmu-v3: Set MEV bit in nested STE for DoS mitigations drivers/iommu/iommufd/Makefile | 2 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 35 + drivers/iommu/iommufd/iommufd_private.h | 135 +++- drivers/iommu/iommufd/iommufd_test.h | 10 + include/linux/iommufd.h | 23 + include/uapi/linux/iommufd.h | 105 +++ tools/testing/selftests/iommu/iommufd_utils.h | 115 ++++ .../arm/arm-smmu-v3/arm-smmu-v3-iommufd.c | 72 +++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 79 ++- drivers/iommu/iommufd/driver.c | 72 +++ drivers/iommu/iommufd/eventq.c | 597 ++++++++++++++++++ drivers/iommu/iommufd/fault.c | 342 ---------- drivers/iommu/iommufd/hw_pagetable.c | 6 +- drivers/iommu/iommufd/main.c | 7 + drivers/iommu/iommufd/selftest.c | 54 ++ drivers/iommu/iommufd/viommu.c | 2 + tools/testing/selftests/iommu/iommufd.c | 36 ++ .../selftests/iommu/iommufd_fail_nth.c | 7 + Documentation/userspace-api/iommufd.rst | 17 + 19 files changed, 1308 insertions(+), 408 deletions(-) create mode 100644 drivers/iommu/iommufd/eventq.c delete mode 100644 drivers/iommu/iommufd/fault.c base-commit: 598749522d4254afb33b8a6c1bea614a95896868 -- 2.43.0

4 months, 1 week

3
33
0 0

[PATCH net-next v6 0/8] Some pktgen fixes/improvments (part II)

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (now already applied to net-next) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() And part II (this one): - net: pktgen: use defines for the various dec/hex number parsing digits lengths - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen Regards, Peter Changes v5 -> v6: - add rev-by Simon Horman - drop patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' - adjust to dropped patch ''net: pktgen: use defines for the various dec/hex number parsing digits lengths' - net: pktgen: fix mix of int/long - fix line break (suggested by Simon Horman) Changes v4 -> v5: - split up patchset into part i/ii (suggested by Simon Horman) - add rev-by Simon Horman - net: pktgen: align some variable declarations to the most common pattern -> net: pktgen: fix mix of int/long - instead of align to most common pattern (int) adjust all usages to size_t for i and max and ssize_t for len and adjust function signatures of hex32_arg(), count_trail_chars(), num_arg() and strn_len() accordingly - respect reverse xmas tree order for local variable declarations (where possible without too much code churn) - update subject line and patch description - dropped net: pktgen: hex32_arg/num_arg error out in case no characters are available - keep empty hex/num arg is implicit assumed as zero value - dropped net: pktgen: num_arg error out in case no valid character is parsed - keep empty hex/num arg is implicit assumed as zero value - Change patch description ('Fixes:' -> 'Addresses the following:', suggested by Simon Horman) - net: pktgen: remove all superfluous index assignements - new patch (suggested by Simon Horman) - selftest: net: add proc_net_pktgen - addapt to dropped patch 'net: pktgen: hex32_arg/num_arg error out in case no characters are available', empty hex/num arg is now implicit assumed as zero value (instead of failure) Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (8): net: pktgen: fix mix of int/long net: pktgen: remove extra tmp variable (re-use len instead) net: pktgen: remove some superfluous variable initializing net: pktgen: fix mpls maximum labels list parsing net: pktgen: fix access outside of user given buffer in pktgen_if_write() net: pktgen: fix mpls reset parsing net: pktgen: remove all superfluous index assignements selftest: net: add proc_net_pktgen net/core/pktgen.c | 288 ++++---- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/proc_net_pktgen.c | 646 ++++++++++++++++++ 4 files changed, 805 insertions(+), 131 deletions(-) create mode 100644 tools/testing/selftests/net/proc_net_pktgen.c -- 2.48.1

4 months, 1 week

2
10
0 0

[PATCH net] xfrm_output: Force software GSO only in tunnel mode

by Cosmin Ratiu

The cited commit fixed a software GSO bug with VXLAN + IPSec in tunnel mode. Unfortunately, it is slightly broader than necessary, as it also severely affects performance for Geneve + IPSec transport mode over a device capable of both HW GSO and IPSec crypto offload. In this case, xfrm_output unnecessarily triggers software GSO instead of letting the HW do it. In simple iperf3 tests over Geneve + IPSec transport mode over a back-2-back pair of NICs with MTU 1500, the performance was observed to be up to 6x worse when doing software GSO compared to leaving it to the hardware. This commit makes xfrm_output only trigger software GSO in crypto offload cases for already encapsulated packets in tunnel mode, as not doing so would then cause the inner tunnel skb->inner_networking_header to be overwritten and break software GSO for that packet later if the device turns out to not be capable of HW GSO. Taking a closer look at the conditions for the original bug, to better understand the reasons for this change: - vxlan_build_skb -> iptunnel_handle_offloads sets inner_protocol and inner network header. - then, udp_tunnel_xmit_skb -> ip_tunnel_xmit adds outer transport and network headers. - later in the xmit path, xfrm_output -> xfrm_outer_mode_output -> xfrm4_prepare_output -> xfrm4_tunnel_encap_add overwrites the inner network header with the one set in ip_tunnel_xmit before adding the second outer header. - __dev_queue_xmit -> validate_xmit_skb checks whether GSO segmentation needs to happen based on dev features. In the original bug, the hw couldn't segment the packets, so skb_gso_segment was invoked. - deep in the .gso_segment callback machinery, __skb_udp_tunnel_segment tries to use the wrong inner network header, expecting the one set in iptunnel_handle_offloads but getting the one set by xfrm instead. - a bit later, ipv6_gso_segment accesses the wrong memory based on that wrong inner network header. With the new change, the original bug (or similar ones) cannot happen again, as xfrm will now trigger software GSO before applying a tunnel. This concern doesn't exist in packet offload mode, when the HW adds encapsulation headers. For the non-offloaded packets (crypto in SW), software GSO is still done unconditionally in the else branch. Reviewed-by: Dragos Tatulea <dtatulea(a)nvidia.com> Reviewed-by: Yael Chemla <ychemla(a)nvidia.com> Fixes: a204aef9fd77 ("xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output") Signed-off-by: Cosmin Ratiu <cratiu(a)nvidia.com> --- net/xfrm/xfrm_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index f7abd42c077d..42f1ca513879 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -758,7 +758,7 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb) skb->encapsulation = 1; if (skb_is_gso(skb)) { - if (skb->inner_protocol) + if (skb->inner_protocol && x->props.mode == XFRM_MODE_TUNNEL) return xfrm_output_gso(net, sk, skb); skb_shinfo(skb)->gso_type |= SKB_GSO_ESP; -- 2.45.0

4 months, 1 week

3
2
0 0

[PATCH v2 0/2] selftests: sched: Add default target support for sched

by Sinadin Shan

This patch series introduces changes to add default build support for the sched tests in selftests. The only test under sched is cs_prctl_test which validates cookies when core scheduling is in effect. This test fails on systems where core scheduling is disabled. The patch series also modifies this behaviour to gracefully skip the test on such systems. For example, such a test skip would look like: TAP version 13 1..1 timeout set to 45 selftests: sched: cs_prctl_test Checking for CONFIG_SCHED_CORE support Core scheduling not enabled in kernel, hence skipping tests ok 1 selftests: sched: cs_prctl_test # SKIP and a successful run: TAP version 13 1..1 timeout set to 45 selftests: sched: cs_prctl_test Checking for CONFIG_SCHED_CORE support CONFIG_SCHED_CORE=y . . . SUCCESS !!! ok 1 selftests: sched: cs_prctl_test Signed-off-by: Sinadin Shan <sinadin.shan(a)oracle.com> --- v2: * Add patch to skip cs_prctl_test on core scheduling disabled systems * v1 link: https://lore.kernel.org/all/20250219064658.449069-1-sinadin.shan@oracle.com --- Sinadin Shan (2): selftests: sched: add sched as a default selftest target selftests: sched: skip cs_prctl_test for systems with core scheduling disabled tools/testing/selftests/Makefile | 1 + tools/testing/selftests/sched/cs_prctl_test.c | 29 ++++++++++++++++++- 2 files changed, 29 insertions(+), 1 deletion(-) -- 2.43.5

4 months, 1 week

3
6
0 0

[PATCH 1/2] libbpf: BPF program load type enum

by Slava Imameev

Replacing the boolean field with an enum simplifies the addition of new load types. Currently, the bpf_program structure defines the autoload type using a boolean field. This field is now replaced with an enum, allowing new BPF program loading types to be introduced by extending the enum value range. This patch is the first in a series of two. Signed-off-by: Slava Imameev <slava.imameev(a)crowdstrike.com> --- tools/lib/bpf/libbpf.c | 50 ++++++++++++------- tools/lib/bpf/libbpf.h | 16 ++++++ tools/lib/bpf/libbpf.map | 2 + .../selftests/bpf/prog_tests/load_type.c | 40 +++++++++++++++ .../selftests/bpf/progs/test_load_type.c | 23 +++++++++ 5 files changed, 112 insertions(+), 19 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/load_type.c create mode 100644 tools/testing/selftests/bpf/progs/test_load_type.c diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 194809da5172..9af5c0b08b8b 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -473,7 +473,7 @@ struct bpf_program { struct bpf_object *obj; int fd; - bool autoload; + enum bpf_prog_load_type load_type; bool autoattach; bool sym_global; bool mark_btf_static; @@ -824,11 +824,11 @@ bpf_object__init_prog(struct bpf_object *obj, struct bpf_program *prog, * autoload set to false. */ if (sec_name[0] == '?') { - prog->autoload = false; + prog->load_type = BPF_PROG_LOAD_TYPE_DISABLED; /* from now on forget there was ? in section name */ sec_name++; } else { - prog->autoload = true; + prog->load_type = BPF_PROG_LOAD_TYPE_AUTO; } prog->autoattach = true; @@ -1117,7 +1117,8 @@ static int bpf_object_adjust_struct_ops_autoload(struct bpf_object *obj) } } if (use_cnt) - prog->autoload = should_load; + prog->load_type = should_load ? BPF_PROG_LOAD_TYPE_AUTO + : BPF_PROG_LOAD_TYPE_DISABLED; } return 0; @@ -1202,7 +1203,7 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map) * then bpf_object_adjust_struct_ops_autoload() will update its * autoload accordingly. */ - st_ops->progs[i]->autoload = false; + st_ops->progs[i]->load_type = BPF_PROG_LOAD_TYPE_DISABLED; st_ops->progs[i] = NULL; } @@ -1241,7 +1242,7 @@ static int bpf_map__init_kern_struct_ops(struct bpf_map *map) * if user replaced it with another program or NULL */ if (st_ops->progs[i] && st_ops->progs[i] != prog) - st_ops->progs[i]->autoload = false; + st_ops->progs[i]->load_type = BPF_PROG_LOAD_TYPE_DISABLED; /* Update the value from the shadow type */ st_ops->progs[i] = prog; @@ -3482,7 +3483,7 @@ static bool obj_needs_vmlinux_btf(const struct bpf_object *obj) } bpf_object__for_each_program(prog, obj) { - if (!prog->autoload) + if (prog->load_type == BPF_PROG_LOAD_TYPE_DISABLED) continue; if (prog_needs_vmlinux_btf(prog)) return true; @@ -5973,7 +5974,7 @@ bpf_object__relocate_core(struct bpf_object *obj, const char *targ_btf_path) /* no need to apply CO-RE relocation if the program is * not going to be loaded */ - if (!prog->autoload) + if (prog->load_type == BPF_PROG_LOAD_TYPE_DISABLED) continue; /* adjust insn_idx from section frame of reference to the local @@ -7106,7 +7107,7 @@ static int bpf_object__relocate(struct bpf_object *obj, const char *targ_btf_pat */ if (prog_is_subprog(obj, prog)) continue; - if (!prog->autoload) + if (prog->load_type == BPF_PROG_LOAD_TYPE_DISABLED) continue; err = bpf_object__relocate_calls(obj, prog); @@ -7142,7 +7143,7 @@ static int bpf_object__relocate(struct bpf_object *obj, const char *targ_btf_pat prog = &obj->programs[i]; if (prog_is_subprog(obj, prog)) continue; - if (!prog->autoload) + if (prog->load_type == BPF_PROG_LOAD_TYPE_DISABLED) continue; /* Process data relos for main programs */ @@ -7906,8 +7907,8 @@ bpf_object__load_progs(struct bpf_object *obj, int log_level) prog = &obj->programs[i]; if (prog_is_subprog(obj, prog)) continue; - if (!prog->autoload) { - pr_debug("prog '%s': skipped loading\n", prog->name); + if (prog->load_type != BPF_PROG_LOAD_TYPE_AUTO) { + pr_debug("prog '%s': skipped auto-loading\n", prog->name); continue; } prog->log_level |= log_level; @@ -9224,16 +9225,13 @@ const char *bpf_program__section_name(const struct bpf_program *prog) bool bpf_program__autoload(const struct bpf_program *prog) { - return prog->autoload; + return prog->load_type == BPF_PROG_LOAD_TYPE_AUTO; } int bpf_program__set_autoload(struct bpf_program *prog, bool autoload) { - if (prog->obj->loaded) - return libbpf_err(-EINVAL); - - prog->autoload = autoload; - return 0; + return bpf_program__set_load_type(prog, + autoload ? BPF_PROG_LOAD_TYPE_AUTO : BPF_PROG_LOAD_TYPE_DISABLED); } bool bpf_program__autoattach(const struct bpf_program *prog) @@ -13983,7 +13981,7 @@ int bpf_object__attach_skeleton(struct bpf_object_skeleton *s) struct bpf_program *prog = *prog_skel->prog; struct bpf_link **link = prog_skel->link; - if (!prog->autoload || !prog->autoattach) + if (prog->load_type != BPF_PROG_LOAD_TYPE_AUTO || !prog->autoattach) continue; /* auto-attaching not supported for this program */ @@ -14087,3 +14085,17 @@ void bpf_object__destroy_skeleton(struct bpf_object_skeleton *s) free(s->progs); free(s); } + +int bpf_program__set_load_type(struct bpf_program *prog, enum bpf_prog_load_type type) +{ + if (prog->obj->loaded) + return libbpf_err(-EINVAL); + + prog->load_type = type; + return 0; +} + +enum bpf_prog_load_type bpf_program__load_type(const struct bpf_program *prog) +{ + return prog->load_type; +} diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h index 3020ee45303a..21e3d1f51cb3 100644 --- a/tools/lib/bpf/libbpf.h +++ b/tools/lib/bpf/libbpf.h @@ -1918,6 +1918,22 @@ LIBBPF_API int libbpf_register_prog_handler(const char *sec, */ LIBBPF_API int libbpf_unregister_prog_handler(int handler_id); +/** + * The program load type: + * + * - BPF_PROG_LOAD_TYPE_DISABLED: the program is not loaded. + * - BPF_PROG_LOAD_TYPE_AUTO: the program is autoloaded when the bpf_object is loaded. + */ +enum bpf_prog_load_type { + BPF_PROG_LOAD_TYPE_DISABLED = 0, + BPF_PROG_LOAD_TYPE_AUTO, +}; + +LIBBPF_API int bpf_program__set_load_type(struct bpf_program *prog, + enum bpf_prog_load_type loadtype); +LIBBPF_API enum bpf_prog_load_type bpf_program__load_type(const struct bpf_program *prog); + + #ifdef __cplusplus } /* extern "C" */ #endif diff --git a/tools/lib/bpf/libbpf.map b/tools/lib/bpf/libbpf.map index a8b2936a1646..08323e7930fd 100644 --- a/tools/lib/bpf/libbpf.map +++ b/tools/lib/bpf/libbpf.map @@ -436,4 +436,6 @@ LIBBPF_1.6.0 { bpf_linker__add_buf; bpf_linker__add_fd; bpf_linker__new_fd; + bpf_program__load_type; + bpf_program__set_load_type; } LIBBPF_1.5.0; diff --git a/tools/testing/selftests/bpf/prog_tests/load_type.c b/tools/testing/selftests/bpf/prog_tests/load_type.c new file mode 100644 index 000000000000..7c8d55173b2b --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/load_type.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <test_progs.h> +#include <time.h> +#include "test_load_type.skel.h" + +void test_load_type(void) +{ + int duration = 0, err; + struct test_load_type *skel; + + skel = test_load_type__open(); + if (CHECK(!skel, "skel_open", "failed to open skeleton\n")) + goto cleanup; + + /* don't load prog1 */ + bpf_program__set_load_type(skel->progs.prog1, BPF_PROG_LOAD_TYPE_DISABLED); + + /* load and attach prog2 */ + bpf_program__set_load_type(skel->progs.prog2, BPF_PROG_LOAD_TYPE_AUTO); + CHECK(!bpf_program__autoload(skel->progs.prog2), "prog2", "not autoload?!\n"); + + err = test_load_type__load(skel); + if (CHECK(err, "skel_load", "failed to load skeleton: %d\n", err)) + goto cleanup; + + CHECK(!bpf_program__autoattach(skel->progs.prog2), "prog2", "not autoattach?!\n"); + + err = test_load_type__attach(skel); + if (CHECK(err, "skel_attach", "skeleton attach failed: %d\n", err)) + goto cleanup; + + usleep(1); + + CHECK(skel->bss->prog1_called, "prog1", "called?!\n"); + CHECK(!skel->bss->prog2_called, "prog2", "not called\n"); + +cleanup: + test_load_type__destroy(skel); +} diff --git a/tools/testing/selftests/bpf/progs/test_load_type.c b/tools/testing/selftests/bpf/progs/test_load_type.c new file mode 100644 index 000000000000..a0d39757c5b9 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/test_load_type.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "vmlinux.h" +#include <bpf/bpf_helpers.h> + +bool prog1_called = false; +bool prog2_called = false; + +SEC("raw_tp/sys_enter") +int prog1(const void *ctx) +{ + prog1_called = true; + return 0; +} + +SEC("raw_tp/sys_enter") +int prog2(const void *ctx) +{ + prog2_called = true; + return 0; +} + +char _license[] SEC("license") = "GPL"; -- 2.39.5 (Apple Git-154)

4 months, 1 week

3
9
0 0

[PATCH v1] selftests/user_events: Fix failures caused by test code

by realxxyq＠163.com

From: Yiqian Xun <xunyiqian(a)kylinos.cn> In parse_abi function,the dyn_test fails because the enable_file isn’t closed after successfully registering an event. By adding wait_for_delete(), the dyn_test now passes as expected. Signed-off-by: Yiqian Xun <xunyiqian(a)kylinos.cn> --- tools/testing/selftests/user_events/dyn_test.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/user_events/dyn_test.c b/tools/testing/selftests/user_events/dyn_test.c index bdf9ab127488..54c9412f8dee 100644 --- a/tools/testing/selftests/user_events/dyn_test.c +++ b/tools/testing/selftests/user_events/dyn_test.c @@ -127,6 +127,8 @@ static int parse_abi(int *check, const char *value) close(fd); + wait_for_delete(); + return ret; } -- 2.25.1

4 months, 1 week

4
5
0 0

Re: Re: Re: Re: Re: [PATCH 2/2] libbpf: BPF programs dynamic loading and attaching

by Slava Imameev

> > > On Mon, 2025-02-10 at 16:06 -0800, Andrii Nakryiko wrote: > > > > Tracking associated maps for a program is not necessary. As long as > > > > the last BPF program using the BPF map is unloaded, the kernel will > > > > automatically free not-anymore-referenced BPF map. Note that > > > > bpf_object itself will keep FDs for BPF maps, so you'd need to make > > > > sure to do bpf_object__close() to release those references. > > > > > > > > But if you are going to ask to re-create BPF maps next time BPF > > > > program is loaded... Well, I'll say you are asking for a bit too > > > > > much, > > > > tbh. If you want to be *that* sophisticated, it shouldn't be too > > > > hard > > > > for you to get all this information from BPF program's > > > > instructions. > > > > > > > > We really are that sophisticated (see below for more details). We could > > scan program instructions, but we'd then tie our logic to BPF > > implementation details and duplicate logic already present in libbpf > > (https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v6.13.2/source… <https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v6.13.2/source…>*L6087__;Iw!!BmdzS3_lV9HdKG8!384hiRcpmYOjMU3kT-1m4GxWp5XxwHj9ICrDtIUKCmCbxLVAxemc6UN64cE3Mktu_z4f2JheoKm6RBYQdc-MiPbyexk6-Rn48A$ > > ). Obviously this *can* be done but it's not at all ideal from an > > application perspective. > > > > > I agree it's not ideal, but it's also not some complicated and > bound-to-be-changed logic. What you point out in libbpf source code is > a bit different thing, reality is much simpler. Only so-called ldimm64 > instruction (BPF_LD | BPF_IMM | BPF_DW opcode) can be referencing map > FD, so analysing this is borderline trivial. And this is part of BPF > ISA, so not going to change. Our approach is to associate an array of maps as a property with each BPF program, this property is initialised at the relocation stage. So, we do not need to parse BPF program instructions. Instead, we rely on recorded relocations. I think this is a more robust and clean solution with advantage of all code in the same place and being at the higher level of abstraction with a relocation table. The mainline libbpf keeps array of maps for a bpf_object, we extended this by adding an array of maps associated with each bpf_program. For example, a code excerpt, from our development branch, which associates a map with bpf_program at relocation phase: insn[0].src_reg = BPF_PSEUDO_MAP_FD; insn[0].imm = map->fd; err = bpf_program__add_map(prog, map); > > > > > > > > > > bpf_object is the unit of coherence in libbpf, so I don't see us > > > > refcounting maps between bpf_objects. Kernel is doing refcounting > > > > based on FDs, so see if you can use that. > > > > > > > > I can understand that. That said, I think if there's no logic across > > objects, and bpf_object access is not thread-safe, it puts us into a > > tough situation: > > - Complex refcounting, code scanning, etc to keep consistency when > > manipulating maps used by multiple programs. > > - Parallel loading not being well-balanced, if we split programs across > > objects. > > > > We could alternatively write our own custom loader, but then we’d have > > to duplicate much of the useful logic that libbpf already implements: > > skeleton generation, map/program association, embedding programs into > > ELFs, loading logic and kernel probing, etc. We’d like some way to > > handle dynamic/parallel loading without having to replicate all the > > advantages libbpf grants us. > > > > > Yeah, I can understand that as well, but bpf_object's single-threaded > design and the fact that bpf_object__load is kind of the final step > where programs are loaded (or not) is pretty backed in. I don't see > bpf_object becoming multi-threaded. We understood this, but the current bpf_object design allowed us to use it in a multithreaded environment with minor modification for bpf_program load. We understand that the design choice of libbpf being single threaded is unlikely to be reconsidered. > > > > > > > > > > bpf_object is the unit of coherence in libbpf, so I don't see us > > > > refcounting maps between bpf_objects. Kernel is doing refcounting > > > > based on FDs, so see if you can use that. > > > > > > > > I can understand that. That said, I think if there's no logic across > > objects, and bpf_object access is not thread-safe, it puts us into a > > tough situation: > > - Complex refcounting, code scanning, etc to keep consistency when > > manipulating maps used by multiple programs. > > - Parallel loading not being well-balanced, if we split programs across > > objects. > > > > We could alternatively write our own custom loader, but then we’d have > > to duplicate much of the useful logic that libbpf already implements: > > skeleton generation, map/program association, embedding programs into > > ELFs, loading logic and kernel probing, etc. We’d like some way to > > handle dynamic/parallel loading without having to replicate all the > > advantages libbpf grants us. > > > > > Yeah, I can understand that as well, but bpf_object's single-threaded > design and the fact that bpf_object__load is kind of the final step > where programs are loaded (or not) is pretty backed in. I don't see > bpf_object becoming multi-threaded. The dynamic program > loading/unloading/loading again is something that I can't yet justify, > tbh. > > > So the best I can propose you is to use libbpf's skeleton and > bpf_object concept for, effectively, ELF handling, relocations, all > the preparations up to loading BPF programs. And after that you can > take over loading and handling program lifetime outside of bpf_object. > > > Dynamic map creation after bpf_object__load() I think is completely > outside of the scope and you'll have to solve this problem for > yourself. I would point out, though, that internally libbpf already > switched to sort-of pre-creating stable FDs for maps before they are > actually created in the kernel. So it's conceivable that we can have > more granularity in bpf_object preparation. I.e., first step would be > to parse ELF and handle relocations, prepare everything. After that we > can have a step to create maps, and then another one to create > programs. Usually people would do all that, but you can stop right > before maps creation or before program creation, whatever fits your > use case better. > > > The key is that program instructions will be final and won't need > adjustments regardless of maps actually being created or not. FDs, as > I mentioned, are stable regardless. We used this in our design, so we did not need to scan BPF program instructions to fix map's fds referenced by instructions from a dynamically loaded bpf_program with dynamically created maps. > > > > The use case here is that our security monitoring agent leverages eBPF > > as its foundational technology to gather telemetry from the kernel. As > > part of that, we hook many different kernel subsystems (process, > > memory, filesystem, network, etc), tying them together and tracking > > with maps. So we legitimately have a very large number of programs all > > doing different work. For products of this scale, it increases security > > and performance to load this set of programs and their maps in an > > optimized, parallel fashion and subsequently change the loaded set of > > programs and maps dynamically without disturbing the rest of the > > application. > > > Yes, makes sense. You'll need to decide for yourself if it's actually > more meaningful to split those 200 programs into independent > bpf_objects by features, and be rigorous about sharing state (maps) > through bpf_map__reuse_fd(), which would allow to parallelize loading > within confines of existing libbpf APIs. Or you can be a bit more > low-level with program loading outside of bpf_object API, as I > described above. Yes, this can be one of the ways to share bpf maps across multiple bpf_objects and use existing libbpf for parallel bps programs loading, if we want to keep a full libbpf compatibility, but at a cost of complicating design, as we need to convert a single bpf_object model to multiple bpf_objects with a new layer that manages these bpf_objects. In our case, as a bpf_program can map to multiple features, which can be modified independently, and to achieve an even load balancing across multiple threads, it would be probably one bpf_program for a bpf_object.

4 months, 1 week

1
0
0 0

[RESEND PATCH v2] wireguard: selftests: Cleanup CONFIG_UBSAN_SANITIZE_ALL

by WangYuli

Commit 918327e9b7ff ("ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL") removed the CONFIG_UBSAN_SANITIZE_ALL configuration option. Eliminate invalid configurations to improve code readability. Link: https://lore.kernel.org/all/20250123105743.GO395043@kernel.org/ Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- Changelog: *v1->v2: Add Simon Horman's "Reviewed-by" tag. Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- tools/testing/selftests/wireguard/qemu/debug.config | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config index 139fd9aa8b12..828f14300d0a 100644 --- a/tools/testing/selftests/wireguard/qemu/debug.config +++ b/tools/testing/selftests/wireguard/qemu/debug.config @@ -22,7 +22,6 @@ CONFIG_HAVE_ARCH_KASAN=y CONFIG_KASAN=y CONFIG_KASAN_INLINE=y CONFIG_UBSAN=y -CONFIG_UBSAN_SANITIZE_ALL=y CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_SHIRQ=y -- 2.47.2

4 months, 1 week

2
1
0 0

[PATCH 00/16] selftests: vDSO: parse_vdso: Make compatible with nolibc

by Thomas Weißschuh

For testing the functionality of the vDSO, it is necessary to build userspace programs for multiple different architectures. It is additional work to acquire matching userspace cross-compilers with full C libraries and then building root images out of those. The kernel tree already contains nolibc, a small, header-only C library. By using it, it is possible to build userspace programs without any additional dependencies. For example the kernel.org crosstools or multi-target clang can be used to build test programs for a multitude of architectures. While nolibc is very limited, it is enough for many selftests. With some minor adjustments it is possible to make parse_vdso.c compatible with nolibc. As an example, vdso_standalone_test_x86 is now built from the same C code as the regular vdso_test_gettimeofday, while still being completely standalone. This should probably go through the kselftest tree. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Thomas Weißschuh (16): MAINTAINERS: Add vDSO selftests elf, uapi: Add definition for STN_UNDEF elf, uapi: Add definition for DT_GNU_HASH elf, uapi: Add definitions for VER_FLG_BASE and VER_FLG_WEAK elf, uapi: Add type ElfXX_Versym elf, uapi: Add types ElfXX_Verdef and ElfXX_Veraux tools/include: Add uapi/linux/elf.h selftests: Add headers target selftests: vDSO: vdso_standalone_test_x86: Use vdso_init_form_sysinfo_ehdr selftests: vDSO: parse_vdso: Drop vdso_init_from_auxv() selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers selftests: vDSO: parse_vdso: Test __SIZEOF_LONG__ instead of ULONG_MAX selftests: vDSO: parse_vdso: Make compatible with nolibc selftests: vDSO: vdso_test_gettimeofday: Clean up includes selftests: vDSO: vdso_test_gettimeofday: Make compatible with nolibc selftests: vDSO: vdso_standalone_test_x86: Switch to nolibc MAINTAINERS | 1 + include/uapi/linux/elf.h | 38 ++ tools/include/uapi/linux/elf.h | 524 +++++++++++++++++++++ tools/testing/selftests/lib.mk | 5 +- tools/testing/selftests/vDSO/Makefile | 11 +- tools/testing/selftests/vDSO/parse_vdso.c | 21 +- tools/testing/selftests/vDSO/parse_vdso.h | 1 - .../selftests/vDSO/vdso_standalone_test_x86.c | 143 +----- .../selftests/vDSO/vdso_test_gettimeofday.c | 4 +- 9 files changed, 584 insertions(+), 164 deletions(-) --- base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b change-id: 20241017-parse_vdso-nolibc-e069baa7ff48 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

4 months, 1 week

4
31
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror