- Linux-kselftest-mirror - lists.linaro.org

Question about where to put test drivers

by Ralph Campbell

I'm planning to add some kernel self tests which use a user level program in tools/testing/selftests/vm/ and a kernel module. See: https://lore.kernel.org/linux-mm/20191023195515.13168-1-rcampbell@nvidia.co… The question is where to put the kernel module source code. I see some test modules that are in lib/test_*.ko and my patch initially placed the hmm-dmirror module in drivers/char/ since it creates a character device. Any advice?

5 years, 8 months

1
0
0 0

[PATCH v7 1/9] hugetlb_cgroup: Add hugetlb_cgroup reservation counter

by Mina Almasry

These counters will track hugetlb reservations rather than hugetlb memory faulted in. This patch only adds the counter, following patches add the charging and uncharging of the counter. Problem: Currently tasks attempting to allocate more hugetlb memory than is available get a failure at mmap/shmget time. This is thanks to Hugetlbfs Reservations [1]. However, if a task attempts to allocate hugetlb memory only more than its hugetlb_cgroup limit allows, the kernel will allow the mmap/shmget call, but will SIGBUS the task when it attempts to fault the memory in. We have developers interested in using hugetlb_cgroups, and they have expressed dissatisfaction regarding this behavior. We'd like to improve this behavior such that tasks violating the hugetlb_cgroup limits get an error on mmap/shmget time, rather than getting SIGBUS'd when they try to fault the excess memory in. The underlying problem is that today's hugetlb_cgroup accounting happens at hugetlb memory *fault* time, rather than at *reservation* time. Thus, enforcing the hugetlb_cgroup limit only happens at fault time, and the offending task gets SIGBUS'd. Proposed Solution: A new page counter named hugetlb.xMB.reservation_[limit|usage]_in_bytes. This counter has slightly different semantics than hugetlb.xMB.[limit|usage]_in_bytes: - While usage_in_bytes tracks all *faulted* hugetlb memory, reservation_usage_in_bytes tracks all *reserved* hugetlb memory and hugetlb memory faulted in without a prior reservation. - If a task attempts to reserve more memory than limit_in_bytes allows, the kernel will allow it to do so. But if a task attempts to reserve more memory than reservation_limit_in_bytes, the kernel will fail this reservation. This proposal is implemented in this patch series, with tests to verify functionality and show the usage. We also added cgroup-v2 support to hugetlb_cgroup so that the new use cases can be extended to v2. Alternatives considered: 1. A new cgroup, instead of only a new page_counter attached to the existing hugetlb_cgroup. Adding a new cgroup seemed like a lot of code duplication with hugetlb_cgroup. Keeping hugetlb related page counters under hugetlb_cgroup seemed cleaner as well. 2. Instead of adding a new counter, we considered adding a sysctl that modifies the behavior of hugetlb.xMB.[limit|usage]_in_bytes, to do accounting at reservation time rather than fault time. Adding a new page_counter seems better as userspace could, if it wants, choose to enforce different cgroups differently: one via limit_in_bytes, and another via reservation_limit_in_bytes. This could be very useful if you're transitioning how hugetlb memory is partitioned on your system one cgroup at a time, for example. Also, someone may find usage for both limit_in_bytes and reservation_limit_in_bytes concurrently, and this approach gives them the option to do so. Testing: - Added tests passing. - libhugetlbfs tests mostly passing, but some tests have trouble with and without this patch series. Seems environment issue rather than code: - Overall results: ********** TEST SUMMARY * 2M * 32-bit 64-bit * Total testcases: 84 0 * Skipped: 0 0 * PASS: 66 0 * FAIL: 14 0 * Killed by signal: 0 0 * Bad configuration: 4 0 * Expected FAIL: 0 0 * Unexpected PASS: 0 0 * Test not present: 0 0 * Strange test result: 0 0 ********** - Failing tests: - elflink_rw_and_share_test("linkhuge_rw") segfaults with and without this patch series. - LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes malloc (2M: 32): FAIL Address is not hugepage - LD_PRELOAD=libhugetlbfs.so HUGETLB_RESTRICT_EXE=unknown:malloc HUGETLB_MORECORE=yes malloc (2M: 32): FAIL Address is not hugepage - LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes malloc_manysmall (2M: 32): FAIL Address is not hugepage - GLIBC_TUNABLES=glibc.malloc.tcache_count=0 LD_PRELOAD=libhugetlbfs.so HUGETLB_MORECORE=yes heapshrink (2M: 32): FAIL Heap not on hugepages - GLIBC_TUNABLES=glibc.malloc.tcache_count=0 LD_PRELOAD=libhugetlbfs.so libheapshrink.so HUGETLB_MORECORE=yes heapshrink (2M: 32): FAIL Heap not on hugepages - HUGETLB_ELFMAP=RW linkhuge_rw (2M: 32): FAIL small_data is not hugepage - HUGETLB_ELFMAP=RW HUGETLB_MINIMAL_COPY=no linkhuge_rw (2M: 32): FAIL small_data is not hugepage - alloc-instantiate-race shared (2M: 32): Bad configuration: sched_setaffinity(cpu1): Invalid argument - FAIL Child 1 killed by signal Killed - shmoverride_linked (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument - HUGETLB_SHM=yes shmoverride_linked (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument - shmoverride_linked_static (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument - HUGETLB_SHM=yes shmoverride_linked_static (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument - LD_PRELOAD=libhugetlbfs.so shmoverride_unlinked (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument - LD_PRELOAD=libhugetlbfs.so HUGETLB_SHM=yes shmoverride_unlinked (2M: 32): FAIL shmget failed size 2097152 from line 176: Invalid argument [1]: https://www.kernel.org/doc/html/latest/vm/hugetlbfs_reserv.html Signed-off-by: Mina Almasry <almasrymina(a)google.com> Acked-by: Hillf Danton <hdanton(a)sina.com> --- include/linux/hugetlb.h | 23 ++++++++- mm/hugetlb_cgroup.c | 111 ++++++++++++++++++++++++++++++---------- 2 files changed, 107 insertions(+), 27 deletions(-) diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 53fc34f930d08..9c49a0ba894d3 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -320,6 +320,27 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, #ifdef CONFIG_HUGETLB_PAGE +enum { + /* Tracks hugetlb memory faulted in. */ + HUGETLB_RES_USAGE, + /* Tracks hugetlb memory reserved. */ + HUGETLB_RES_RESERVATION_USAGE, + /* Limit for hugetlb memory faulted in. */ + HUGETLB_RES_LIMIT, + /* Limit for hugetlb memory reserved. */ + HUGETLB_RES_RESERVATION_LIMIT, + /* Max usage for hugetlb memory faulted in. */ + HUGETLB_RES_MAX_USAGE, + /* Max usage for hugetlb memory reserved. */ + HUGETLB_RES_RESERVATION_MAX_USAGE, + /* Faulted memory accounting fail count. */ + HUGETLB_RES_FAILCNT, + /* Reserved memory accounting fail count. */ + HUGETLB_RES_RESERVATION_FAILCNT, + HUGETLB_RES_NULL, + HUGETLB_RES_MAX, +}; + #define HSTATE_NAME_LEN 32 /* Defines one hugetlb page size */ struct hstate { @@ -340,7 +361,7 @@ struct hstate { unsigned int surplus_huge_pages_node[MAX_NUMNODES]; #ifdef CONFIG_CGROUP_HUGETLB /* cgroup control files */ - struct cftype cgroup_files[5]; + struct cftype cgroup_files[HUGETLB_RES_MAX]; #endif char name[HSTATE_NAME_LEN]; }; diff --git a/mm/hugetlb_cgroup.c b/mm/hugetlb_cgroup.c index f1930fa0b445d..1ed4448ca41d3 100644 --- a/mm/hugetlb_cgroup.c +++ b/mm/hugetlb_cgroup.c @@ -25,6 +25,10 @@ struct hugetlb_cgroup { * the counter to account for hugepages from hugetlb. */ struct page_counter hugepage[HUGE_MAX_HSTATE]; + /* + * the counter to account for hugepage reservations from hugetlb. + */ + struct page_counter reserved_hugepage[HUGE_MAX_HSTATE]; }; #define MEMFILE_PRIVATE(x, val) (((x) << 16) | (val)) @@ -33,6 +37,14 @@ struct hugetlb_cgroup { static struct hugetlb_cgroup *root_h_cgroup __read_mostly; +static inline struct page_counter * +hugetlb_cgroup_get_counter(struct hugetlb_cgroup *h_cg, int idx, bool reserved) +{ + if (reserved) + return &h_cg->reserved_hugepage[idx]; + return &h_cg->hugepage[idx]; +} + static inline struct hugetlb_cgroup *hugetlb_cgroup_from_css(struct cgroup_subsys_state *s) { @@ -254,30 +266,33 @@ void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, return; } -enum { - RES_USAGE, - RES_LIMIT, - RES_MAX_USAGE, - RES_FAILCNT, -}; - static u64 hugetlb_cgroup_read_u64(struct cgroup_subsys_state *css, struct cftype *cft) { struct page_counter *counter; + struct page_counter *reserved_counter; struct hugetlb_cgroup *h_cg = hugetlb_cgroup_from_css(css); counter = &h_cg->hugepage[MEMFILE_IDX(cft->private)]; + reserved_counter = &h_cg->reserved_hugepage[MEMFILE_IDX(cft->private)]; switch (MEMFILE_ATTR(cft->private)) { - case RES_USAGE: + case HUGETLB_RES_USAGE: return (u64)page_counter_read(counter) * PAGE_SIZE; - case RES_LIMIT: + case HUGETLB_RES_RESERVATION_USAGE: + return (u64)page_counter_read(reserved_counter) * PAGE_SIZE; + case HUGETLB_RES_LIMIT: return (u64)counter->max * PAGE_SIZE; - case RES_MAX_USAGE: + case HUGETLB_RES_RESERVATION_LIMIT: + return (u64)reserved_counter->max * PAGE_SIZE; + case HUGETLB_RES_MAX_USAGE: return (u64)counter->watermark * PAGE_SIZE; - case RES_FAILCNT: + case HUGETLB_RES_RESERVATION_MAX_USAGE: + return (u64)reserved_counter->watermark * PAGE_SIZE; + case HUGETLB_RES_FAILCNT: return counter->failcnt; + case HUGETLB_RES_RESERVATION_FAILCNT: + return reserved_counter->failcnt; default: BUG(); } @@ -291,6 +306,7 @@ static ssize_t hugetlb_cgroup_write(struct kernfs_open_file *of, int ret, idx; unsigned long nr_pages; struct hugetlb_cgroup *h_cg = hugetlb_cgroup_from_css(of_css(of)); + bool reserved = false; if (hugetlb_cgroup_is_root(h_cg)) /* Can't set limit on root */ return -EINVAL; @@ -304,9 +320,14 @@ static ssize_t hugetlb_cgroup_write(struct kernfs_open_file *of, nr_pages = round_down(nr_pages, 1 << huge_page_order(&hstates[idx])); switch (MEMFILE_ATTR(of_cft(of)->private)) { - case RES_LIMIT: + case HUGETLB_RES_RESERVATION_LIMIT: + reserved = true; + /* Fall through. */ + case HUGETLB_RES_LIMIT: mutex_lock(&hugetlb_limit_mutex); - ret = page_counter_set_max(&h_cg->hugepage[idx], nr_pages); + ret = page_counter_set_max(hugetlb_cgroup_get_counter(h_cg, idx, + reserved), + nr_pages); mutex_unlock(&hugetlb_limit_mutex); break; default: @@ -320,18 +341,26 @@ static ssize_t hugetlb_cgroup_reset(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off) { int ret = 0; - struct page_counter *counter; + struct page_counter *counter, *reserved_counter; struct hugetlb_cgroup *h_cg = hugetlb_cgroup_from_css(of_css(of)); counter = &h_cg->hugepage[MEMFILE_IDX(of_cft(of)->private)]; + reserved_counter = + &h_cg->reserved_hugepage[MEMFILE_IDX(of_cft(of)->private)]; switch (MEMFILE_ATTR(of_cft(of)->private)) { - case RES_MAX_USAGE: + case HUGETLB_RES_MAX_USAGE: page_counter_reset_watermark(counter); break; - case RES_FAILCNT: + case HUGETLB_RES_RESERVATION_MAX_USAGE: + page_counter_reset_watermark(reserved_counter); + break; + case HUGETLB_RES_FAILCNT: counter->failcnt = 0; break; + case HUGETLB_RES_RESERVATION_FAILCNT: + reserved_counter->failcnt = 0; + break; default: ret = -EINVAL; break; @@ -357,37 +386,67 @@ static void __init __hugetlb_cgroup_file_init(int idx) struct hstate *h = &hstates[idx]; /* format the size */ - mem_fmt(buf, 32, huge_page_size(h)); + mem_fmt(buf, sizeof(buf), huge_page_size(h)); /* Add the limit file */ - cft = &h->cgroup_files[0]; + cft = &h->cgroup_files[HUGETLB_RES_LIMIT]; snprintf(cft->name, MAX_CFTYPE_NAME, "%s.limit_in_bytes", buf); - cft->private = MEMFILE_PRIVATE(idx, RES_LIMIT); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_LIMIT); + cft->read_u64 = hugetlb_cgroup_read_u64; + cft->write = hugetlb_cgroup_write; + + /* Add the reservation limit file */ + cft = &h->cgroup_files[HUGETLB_RES_RESERVATION_LIMIT]; + snprintf(cft->name, MAX_CFTYPE_NAME, "%s.reservation_limit_in_bytes", + buf); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_RESERVATION_LIMIT); cft->read_u64 = hugetlb_cgroup_read_u64; cft->write = hugetlb_cgroup_write; /* Add the usage file */ - cft = &h->cgroup_files[1]; + cft = &h->cgroup_files[HUGETLB_RES_USAGE]; snprintf(cft->name, MAX_CFTYPE_NAME, "%s.usage_in_bytes", buf); - cft->private = MEMFILE_PRIVATE(idx, RES_USAGE); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_USAGE); + cft->read_u64 = hugetlb_cgroup_read_u64; + + /* Add the reservation usage file */ + cft = &h->cgroup_files[HUGETLB_RES_RESERVATION_USAGE]; + snprintf(cft->name, MAX_CFTYPE_NAME, "%s.reservation_usage_in_bytes", + buf); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_RESERVATION_USAGE); cft->read_u64 = hugetlb_cgroup_read_u64; /* Add the MAX usage file */ - cft = &h->cgroup_files[2]; + cft = &h->cgroup_files[HUGETLB_RES_MAX_USAGE]; snprintf(cft->name, MAX_CFTYPE_NAME, "%s.max_usage_in_bytes", buf); - cft->private = MEMFILE_PRIVATE(idx, RES_MAX_USAGE); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_MAX_USAGE); + cft->write = hugetlb_cgroup_reset; + cft->read_u64 = hugetlb_cgroup_read_u64; + + /* Add the MAX reservation usage file */ + cft = &h->cgroup_files[HUGETLB_RES_RESERVATION_MAX_USAGE]; + snprintf(cft->name, MAX_CFTYPE_NAME, + "%s.reservation_max_usage_in_bytes", buf); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_RESERVATION_MAX_USAGE); cft->write = hugetlb_cgroup_reset; cft->read_u64 = hugetlb_cgroup_read_u64; /* Add the failcntfile */ - cft = &h->cgroup_files[3]; + cft = &h->cgroup_files[HUGETLB_RES_FAILCNT]; snprintf(cft->name, MAX_CFTYPE_NAME, "%s.failcnt", buf); - cft->private = MEMFILE_PRIVATE(idx, RES_FAILCNT); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_FAILCNT); + cft->write = hugetlb_cgroup_reset; + cft->read_u64 = hugetlb_cgroup_read_u64; + + /* Add the reservation failcntfile */ + cft = &h->cgroup_files[HUGETLB_RES_RESERVATION_FAILCNT]; + snprintf(cft->name, MAX_CFTYPE_NAME, "%s.reservation_failcnt", buf); + cft->private = MEMFILE_PRIVATE(idx, HUGETLB_RES_RESERVATION_FAILCNT); cft->write = hugetlb_cgroup_reset; cft->read_u64 = hugetlb_cgroup_read_u64; /* NULL terminate the last cft */ - cft = &h->cgroup_files[4]; + cft = &h->cgroup_files[HUGETLB_RES_NULL]; memset(cft, 0, sizeof(*cft)); WARN_ON(cgroup_add_legacy_cftypes(&hugetlb_cgrp_subsys, -- 2.24.0.rc0.303.g954a862665-goog

5 years, 8 months

2
11
0 0

[BUGFIX PATCH] selftests: breakpoints: Fix a typo of function name

by Masami Hiramatsu

Since commit 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") accidentally introduced 'a' typo in the front of run_test() function, breakpoint_test_arm64.c became not able to be compiled. Remove the 'a' from arun_test(). Fixes: 5821ba969511 ("selftests: Add test plan API to kselftest.h and adjust callers") Reported-by: Jun Takahashi <takahashi.jun_s(a)aa.socionext.com> Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Kees Cook <keescook(a)chromium.org> --- .../selftests/breakpoints/breakpoint_test_arm64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c b/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c index 58ed5eeab709..ad41ea69001b 100644 --- a/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c +++ b/tools/testing/selftests/breakpoints/breakpoint_test_arm64.c @@ -109,7 +109,7 @@ static bool set_watchpoint(pid_t pid, int size, int wp) return false; } -static bool arun_test(int wr_size, int wp_size, int wr, int wp) +static bool run_test(int wr_size, int wp_size, int wr, int wp) { int status; siginfo_t siginfo;

5 years, 8 months

2
1
0 0

next-20191031 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.4.0-rc5 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 49afce6d47fe05ee01f1a41129b835fe4cca7eea git describe: next-20191031 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20191031 Regressions (compared to build next-20191030) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20191030) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 776 total tests in the following environments and test suites. pass 392 fail 318 xfail 0 skip 66 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest Failures ------------------------------------------------------------------------ x15: dragonboard-410c: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/timers_rtcpie * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh x86: juno-r2: qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/net_xfrm_policy.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/size_get_size * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_ldt_gdt_32 * kselftest/x86_sigreturn_32 i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/firmware_fw_run_tests.sh * kselftest/intel_pstate_run.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgso_bench.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/size_get_size * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_ldt_gdt_32 * kselftest/x86_sigreturn_32 hi6220-hikey: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 8 months

1
0
0 0

[PATCH v2] kernel-doc: rename the kernel-doc directive 'functions' to 'identifiers'

by Changbin Du

The 'functions' directive is not only for functions, but also works for structs/unions. So the name is misleading. This patch renames it to 'identifiers', which specific the functions/types to be included in documentation. We keep the old name as an alias of the new one before all documentation are updated. Signed-off-by: Changbin Du <changbin.du(a)gmail.com> --- v2: o use 'identifiers' as the new directive name. --- Documentation/doc-guide/kernel-doc.rst | 29 ++++++++++++++------------ Documentation/sphinx/kerneldoc.py | 19 ++++++++++------- 2 files changed, 28 insertions(+), 20 deletions(-) diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index 192c36af39e2..fff6604631ea 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -476,6 +476,22 @@ internal: *[source-pattern ...]* .. kernel-doc:: drivers/gpu/drm/i915/intel_audio.c :internal: +identifiers: *[ function/type ...]* + Include documentation for each *function* and *type* in *source*. + If no *function* is specified, the documentation for all functions + and types in the *source* will be included. + + Examples:: + + .. kernel-doc:: lib/bitmap.c + :identifiers: bitmap_parselist bitmap_parselist_user + + .. kernel-doc:: lib/idr.c + :identifiers: + +functions: *[ function/type ...]* + This is an alias of the 'identifiers' directive and deprecated. + doc: *title* Include documentation for the ``DOC:`` paragraph identified by *title* in *source*. Spaces are allowed in *title*; do not quote the *title*. The *title* @@ -488,19 +504,6 @@ doc: *title* .. kernel-doc:: drivers/gpu/drm/i915/intel_audio.c :doc: High Definition Audio over HDMI and Display Port -functions: *[ function ...]* - Include documentation for each *function* in *source*. - If no *function* is specified, the documentation for all functions - and types in the *source* will be included. - - Examples:: - - .. kernel-doc:: lib/bitmap.c - :functions: bitmap_parselist bitmap_parselist_user - - .. kernel-doc:: lib/idr.c - :functions: - Without options, the kernel-doc directive includes all documentation comments from the source file. diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index 1159405cb920..0689f9c37f1e 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -59,9 +59,10 @@ class KernelDocDirective(Directive): optional_arguments = 4 option_spec = { 'doc': directives.unchanged_required, - 'functions': directives.unchanged, 'export': directives.unchanged, 'internal': directives.unchanged, + 'identifiers': directives.unchanged, + 'functions': directives.unchanged, # alias of 'identifiers' } has_content = False @@ -71,6 +72,7 @@ class KernelDocDirective(Directive): filename = env.config.kerneldoc_srctree + '/' + self.arguments[0] export_file_patterns = [] + identifiers = None # Tell sphinx of the dependency env.note_dependency(os.path.abspath(filename)) @@ -86,19 +88,22 @@ class KernelDocDirective(Directive): export_file_patterns = str(self.options.get('internal')).split() elif 'doc' in self.options: cmd += ['-function', str(self.options.get('doc'))] + elif 'identifiers' in self.options: + identifiers = self.options.get('identifiers').split() elif 'functions' in self.options: - functions = self.options.get('functions').split() - if functions: - for f in functions: - cmd += ['-function', f] - else: - cmd += ['-no-doc-sections'] + identifiers = self.options.get('functions').split() for pattern in export_file_patterns: for f in glob.glob(env.config.kerneldoc_srctree + '/' + pattern): env.note_dependency(os.path.abspath(f)) cmd += ['-export-file', f] + if identifiers: + for i in identifiers: + cmd += ['-function', i] + elif identifiers is not None: + cmd += ['-no-doc-sections'] + cmd += [filename] try: -- 2.20.1

5 years, 8 months

4
8
0 0

[PATCH] selftests: add tests for clone3()

by Adrian Reber

This adds tests for clone3() with different values and sizes of struct clone_args. This selftest was initially part of of the clone3() with PID selftest. After that patch was almost merged Eugene sent out a couple of patches to fix problems with these test. This commit now only contains the clone3() selftest after the LPC decision to rework clone3() with PID to allow setting the PID in multiple PID namespaces including all of Eugene's patches. Signed-off-by: Eugene Syromiatnikov <esyr(a)redhat.com> Signed-off-by: Adrian Reber <areber(a)redhat.com> --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/clone3/.gitignore | 1 + tools/testing/selftests/clone3/Makefile | 7 + tools/testing/selftests/clone3/clone3.c | 195 ++++++++++++++++++++++ 5 files changed, 205 insertions(+) create mode 100644 tools/testing/selftests/clone3/.gitignore create mode 100644 tools/testing/selftests/clone3/Makefile create mode 100644 tools/testing/selftests/clone3/clone3.c diff --git a/MAINTAINERS b/MAINTAINERS index c6c34d04ce95..d9426de8fb38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12830,6 +12830,7 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git F: samples/pidfd/ F: tools/testing/selftests/pidfd/ +F: tools/testing/selftests/clone3/ K: (?i)pidfd K: (?i)clone3 K: \b(clone_args|kernel_clone_args)\b diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 4cdbae6f4e61..ad442364218a 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -4,6 +4,7 @@ TARGETS += bpf TARGETS += breakpoints TARGETS += capabilities TARGETS += cgroup +TARGETS += clone3 TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += drivers/dma-buf diff --git a/tools/testing/selftests/clone3/.gitignore b/tools/testing/selftests/clone3/.gitignore new file mode 100644 index 000000000000..85d9d3ba2524 --- /dev/null +++ b/tools/testing/selftests/clone3/.gitignore @@ -0,0 +1 @@ +clone3 diff --git a/tools/testing/selftests/clone3/Makefile b/tools/testing/selftests/clone3/Makefile new file mode 100644 index 000000000000..ea922c014ae4 --- /dev/null +++ b/tools/testing/selftests/clone3/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 + +CFLAGS += -I../../../../usr/include/ + +TEST_GEN_PROGS := clone3 + +include ../lib.mk diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c new file mode 100644 index 000000000000..a5a1ed91e550 --- /dev/null +++ b/tools/testing/selftests/clone3/clone3.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* Based on Christian Brauner's clone3() example */ + +#define _GNU_SOURCE +#include <errno.h> +#include <inttypes.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/syscall.h> +#include <sys/types.h> +#include <sys/un.h> +#include <sys/wait.h> +#include <unistd.h> +#include <sched.h> + +#include "../kselftest.h" + +/* + * Different sizes of struct clone_args + */ +#define CLONE3_ARGS_SIZE_V0 64 + +enum test_mode { + CLONE3_ARGS_NO_TEST, + CLONE3_ARGS_ALL_0, + CLONE3_ARGS_ALL_1, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG, +}; + +static pid_t raw_clone(struct clone_args *args, size_t size) +{ + return syscall(__NR_clone3, args, size); +} + +static int call_clone3(uint64_t flags, size_t size, enum test_mode test_mode) +{ + struct clone_args args = {0}; + pid_t ppid = -1; + pid_t pid = -1; + int status; + + args.flags = flags; + args.exit_signal = SIGCHLD; + + if (size == 0) + size = sizeof(struct clone_args); + + switch (test_mode) { + case CLONE3_ARGS_ALL_0: + args.flags = 0; + args.pidfd = 0; + args.child_tid = 0; + args.parent_tid = 0; + args.exit_signal = 0; + args.stack = 0; + args. stack_size = 0; + args.tls = 0; + break; + + case CLONE3_ARGS_ALL_1: + args.flags = 1; + args.pidfd = 1; + args.child_tid = 1; + args.parent_tid = 1; + args.exit_signal = 1; + args.stack = 1; + args. stack_size = 1; + args.tls = 1; + break; + + case CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG: + args.exit_signal = 0xbadc0ded00000000ULL; + break; + + case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG: + args.exit_signal = 0x0000000080000000ULL; + break; + + case CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG: + args.exit_signal = 0x0000000000000100ULL; + break; + + case CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG: + args.exit_signal = 0x00000000000000f0ULL; + break; + } + + pid = raw_clone(&args, size); + if (pid < 0) { + ksft_print_msg("%s - Failed to create new process\n", + strerror(errno)); + return -errno; + } + + if (pid == 0) { + ksft_print_msg("I am the child, my PID is %d\n", getpid()); + _exit(EXIT_SUCCESS); + } + + ppid = getpid(); + ksft_print_msg("I am the parent (%d). My child's pid is %d\n", + ppid, pid); + + (void)wait(&status); + if (WEXITSTATUS(status)) + return WEXITSTATUS(status); + + return 0; +} + +static void test_clone3(uint64_t flags, size_t size, int expected, + enum test_mode test_mode) +{ + int ret; + + ksft_print_msg( + "[%d] Trying clone3() with flags %#" PRIx64 " (size %zu)\n", + getpid(), flags, size); + ret = call_clone3(flags, size, test_mode); + ksft_print_msg("[%d] clone3() with flags says: %d expected %d\n", + getpid(), ret, expected); + if (ret != expected) + ksft_test_result_fail( + "[%d] Result (%d) is different than expected (%d)\n", + getpid(), ret, expected); + else + ksft_test_result_pass( + "[%d] Result (%d) matches expectation (%d)\n", + getpid(), ret, expected); +} +int main(int argc, char *argv[]) +{ + pid_t pid; + + ksft_print_header(); + ksft_set_plan(17); + + /* Just a simple clone3() should return 0.*/ + test_clone3(0, 0, 0, CLONE3_ARGS_NO_TEST); + /* Do a clone3() in a new PID NS.*/ + test_clone3(CLONE_NEWPID, 0, 0, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with CLONE3_ARGS_SIZE_V0. */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, 0, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with CLONE3_ARGS_SIZE_V0 - 8 */ + test_clone3(0, CLONE3_ARGS_SIZE_V0 - 8, -EINVAL, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with sizeof(struct clone_args) + 8 */ + test_clone3(0, sizeof(struct clone_args) + 8, 0, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with all members set to 1 */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, -EINVAL, CLONE3_ARGS_ALL_1); + /* Do a clone3() with exit_signal having highest 32 bits non-zero */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, -EINVAL, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_BIG); + /* Do a clone3() with negative 32-bit exit_signal */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, -EINVAL, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_NEG); + /* Do a clone3() with exit_signal not fitting into CSIGNAL mask */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, -EINVAL, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_CSIG); + /* Do a clone3() with NSIG < exit_signal < CSIG */ + test_clone3(0, CLONE3_ARGS_SIZE_V0, -EINVAL, + CLONE3_ARGS_INVAL_EXIT_SIGNAL_NSIG); + /* + * Do a clone3() with sizeof(struct clone_args) + 8 + * and all members set to 0. + */ + test_clone3(0, sizeof(struct clone_args) + 8, 0, CLONE3_ARGS_ALL_0); + /* + * Do a clone3() with sizeof(struct clone_args) + 8 + * and all members set to 0. + */ + test_clone3(0, sizeof(struct clone_args) + 8, -EINVAL, + CLONE3_ARGS_ALL_1); + /* Do a clone3() with > page size */ + test_clone3(0, getpagesize() + 8, -E2BIG, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with CLONE3_ARGS_SIZE_V0 in a new PID NS. */ + test_clone3(CLONE_NEWPID, CLONE3_ARGS_SIZE_V0, 0, CLONE3_ARGS_NO_TEST); + /* Do a clone3() with CLONE3_ARGS_SIZE_V0 - 8 in a new PID NS */ + test_clone3(CLONE_NEWPID, CLONE3_ARGS_SIZE_V0 - 8, -EINVAL, + CLONE3_ARGS_NO_TEST); + /* Do a clone3() with sizeof(struct clone_args) + 8 in a new PID NS */ + test_clone3(CLONE_NEWPID, sizeof(struct clone_args) + 8, 0, + CLONE3_ARGS_NO_TEST); + /* Do a clone3() with > page size in a new PID NS */ + test_clone3(CLONE_NEWPID, getpagesize() + 8, -E2BIG, + CLONE3_ARGS_NO_TEST); + + return !ksft_get_fail_cnt() ? ksft_exit_pass() : ksft_exit_fail(); +} -- 2.23.0

5 years, 8 months

2
1
0 0

[BUGFIX PATCH v3 0/5] selftests: Fixes for 32bit arch

by Masami Hiramatsu

Hi, Here are the 3rd version of kselftest fixes some on 32bit arch (e.g. arm) In this version, I updated [1/5] to make va_max 1MB unconditionally according to Alexey's comment. When I built the ksefltest on arm, I hit some 32bit related warnings. Here are the patches to fix those issues. - [1/5] va_max was set 2^32 even on 32bit arch. This can make va_max == 0 and always fail. Make it 1GB unconditionally. - [2/5] Some VM tests requires 64bit user space, which should not run on 32bit arch. - [3/5] For counting the size of large file, we should use size_t instead of unsinged long. - [4/5] Gcc warns printf format for size_t and int64_t on 32bit arch. Use %llu and cast it. - [5/5] Gcc warns __u64 and pointer type castings. It should once translated to unsigned long. Thank you, --- Masami Hiramatsu (5): selftests: proc: Make va_max 1MB selftests: vm: Build/Run 64bit tests only on 64bit arch selftests: net: Use size_t and ssize_t for counting file size selftests: net: Fix printf format warnings on arm selftests: sync: Fix cast warnings on arm tools/testing/selftests/net/so_txtime.c | 4 ++-- tools/testing/selftests/net/tcp_mmap.c | 8 ++++---- tools/testing/selftests/net/udpgso.c | 3 ++- tools/testing/selftests/net/udpgso_bench_tx.c | 3 ++- .../selftests/proc/proc-self-map-files-002.c | 6 +++++- tools/testing/selftests/sync/sync.c | 6 +++--- tools/testing/selftests/vm/Makefile | 5 +++++ tools/testing/selftests/vm/run_vmtests | 10 ++++++++++ 8 files changed, 33 insertions(+), 12 deletions(-) -- Masami Hiramatsu (Linaro) <mhiramat(a)kernel.org>

5 years, 8 months

1
6
0 0

next-20191029 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.4.0-rc5 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: c57cf3833c66cd86c9bdee7112fc992377143f74 git describe: next-20191029 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20191029 Regressions (compared to build next-20191025) ------------------------------------------------------------------------ dragonboard-410c - arm64: kselftest: * net_rtnetlink.sh Fixes (compared to build next-20191025) ------------------------------------------------------------------------ x86_64: kselftest: * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * net_fib-onlink-tests.sh x86_64: kselftest: * net_fib-onlink-tests.sh kselftest-vsyscall-mode-native: * net_fib-onlink-tests.sh In total: ------------------------------------------------------------------------ Ran 814 total tests in the following environments and test suites. pass 334 fail 404 xfail 0 skip 76 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ x15: dragonboard-410c: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_rtnetlink.sh * kselftest/net_run_netsocktests * kselftest/net_udpgso_bench.sh i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/firmware_fw_run_tests.sh * kselftest/intel_pstate_run.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_run_netsocktests x86: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/firmware_fw_run_tests.sh * kselftest/intel_pstate_run.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_run_netsocktests * kselftest/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/bpf_get_cgroup_id_user * kselftest-vsyscall-mode-native/bpf_test_bpftool_build.sh * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_maps * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_progs-no_alu32 * kselftest-vsyscall-mode-native/bpf_test_select_reuseport * kselftest-vsyscall-mode-native/bpf_test_skb_cgroup_id.sh * kselftest-vsyscall-mode-native/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-native/bpf_test_sock_fields * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_sysctl * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tcpbpf_user * kselftest-vsyscall-mode-native/bpf_test_tcp_check_syncookie.sh * kselftest-vsyscall-mode-native/bpf_test_tcpnotify_user * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/bpf_test_tunnel.sh * kselftest-vsyscall-mode-native/bpf_test_xdping.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_meta.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_redirect.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_vlan_mode_generic.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_vlan_mode_native.sh * kselftest-vsyscall-mode-native/bpf_xdping * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/kvm_clear_dirty_log_test * kselftest-vsyscall-mode-native/kvm_cr4_cpuid_sync_test * kselftest-vsyscall-mode-native/kvm_dirty_log_test * kselftest-vsyscall-mode-native/kvm_evmcs_test * kselftest-vsyscall-mode-native/kvm_hyperv_cpuid * kselftest-vsyscall-mode-native/kvm_kvm_create_max_vcpus * kselftest-vsyscall-mode-native/kvm_platform_info_test * kselftest-vsyscall-mode-native/kvm_set_sregs_test * kselftest-vsyscall-mode-native/kvm_smm_test * kselftest-vsyscall-mode-native/kvm_state_test * kselftest-vsyscall-mode-native/kvm_sync_regs_test * kselftest-vsyscall-mode-native/kvm_vmx_close_while_nested_test * kselftest-vsyscall-mode-native/kvm_vmx_dirty_log_test * kselftest-vsyscall-mode-native/kvm_vmx_set_nested_state_test * kselftest-vsyscall-mode-native/kvm_vmx_tsc_adjust_test * kselftest-vsyscall-mode-native/lib_bitmap.sh * kselftest-vsyscall-mode-native/lib_prime_numbers.sh * kselftest-vsyscall-mode-native/lib_printf.sh * kselftest-vsyscall-mode-native/lib_strscpy.sh * kselftest-vsyscall-mode-native/mqueue_mq_perf_tests * kselftest-vsyscall-mode-native/net_fib_tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_run_netsocktests * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/bpf_get_cgroup_id_user * kselftest-vsyscall-mode-none/bpf_test_bpftool_build.sh * kselftest-vsyscall-mode-none/bpf_test_dev_cgroup * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_maps * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_progs-no_alu32 * kselftest-vsyscall-mode-none/bpf_test_select_reuseport * kselftest-vsyscall-mode-none/bpf_test_skb_cgroup_id.sh * kselftest-vsyscall-mode-none/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-none/bpf_test_socket_cookie * kselftest-vsyscall-mode-none/bpf_test_sock_fields * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_sysctl * kselftest-vsyscall-mode-none/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-none/bpf_test_tcpbpf_user * kselftest-vsyscall-mode-none/bpf_test_tcp_check_syncookie.sh * kselftest-vsyscall-mode-none/bpf_test_tcpnotify_user * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/bpf_test_tunnel.sh * kselftest-vsyscall-mode-none/bpf_test_xdping.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_meta.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_redirect.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_vlan_mode_generic.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_vlan_mode_native.sh * kselftest-vsyscall-mode-none/bpf_xdping * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/intel_pstate_run.sh * kselftest-vsyscall-mode-none/kvm_clear_dirty_log_test * kselftest-vsyscall-mode-none/kvm_cr4_cpuid_sync_test * kselftest-vsyscall-mode-none/kvm_dirty_log_test * kselftest-vsyscall-mode-none/kvm_evmcs_test * kselftest-vsyscall-mode-none/kvm_hyperv_cpuid * kselftest-vsyscall-mode-none/kvm_kvm_create_max_vcpus * kselftest-vsyscall-mode-none/kvm_platform_info_test * kselftest-vsyscall-mode-none/kvm_set_sregs_test * kselftest-vsyscall-mode-none/kvm_smm_test * kselftest-vsyscall-mode-none/kvm_state_test * kselftest-vsyscall-mode-none/kvm_sync_regs_test * kselftest-vsyscall-mode-none/kvm_vmx_close_while_nested_test * kselftest-vsyscall-mode-none/kvm_vmx_dirty_log_test * kselftest-vsyscall-mode-none/kvm_vmx_set_nested_state_test * kselftest-vsyscall-mode-none/kvm_vmx_tsc_adjust_test * kselftest-vsyscall-mode-none/lib_bitmap.sh * kselftest-vsyscall-mode-none/lib_prime_numbers.sh * kselftest-vsyscall-mode-none/lib_printf.sh * kselftest-vsyscall-mode-none/lib_strscpy.sh * kselftest-vsyscall-mode-none/mqueue_mq_perf_tests * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_fib_tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_run_netsocktests * kselftest-vsyscall-mode-none/net_xfrm_policy.sh qemu_arm64: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_run_netsocktests hi6220-hikey: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_pmtu.sh * kselftest/net_run_netsocktests Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 8 months

1
0
0 0

[PATCH] selftests: gen_kselftest_tar.sh: Do not clobber kselftest/

by Kees Cook

The default installation location for gen_kselftest_tar.sh was still "kselftest/" which collides with the existing directory. Instead, this moves the installation target into "kselftest_install/kselftest/" and adjusts the tar creation accordingly. This also adjusts indentation and logic to be consistent. Fixes: 42d46e57ec97 ("selftests: Extract single-test shell logic from lib.mk") Signed-off-by: Kees Cook <keescook(a)chromium.org> --- tools/testing/selftests/gen_kselftest_tar.sh | 21 ++++++++++------- tools/testing/selftests/kselftest_install.sh | 24 ++++++++++---------- 2 files changed, 25 insertions(+), 20 deletions(-) diff --git a/tools/testing/selftests/gen_kselftest_tar.sh b/tools/testing/selftests/gen_kselftest_tar.sh index a27e2eec3586..8b2b6088540d 100755 --- a/tools/testing/selftests/gen_kselftest_tar.sh +++ b/tools/testing/selftests/gen_kselftest_tar.sh @@ -38,16 +38,21 @@ main() esac fi - install_dir=./kselftest + # Create working directory. + dest=`pwd` + install_work="$dest"/kselftest_install + install_name=kselftest + install_dir="$install_work"/"$install_name" + mkdir -p "$install_dir" -# Run install using INSTALL_KSFT_PATH override to generate install -# directory -./kselftest_install.sh -tar $copts kselftest${ext} $install_dir -echo "Kselftest archive kselftest${ext} created!" + # Run install using INSTALL_KSFT_PATH override to generate install + # directory + ./kselftest_install.sh "$install_dir" + (cd "$install_work"; tar $copts "$dest"/kselftest${ext} $install_name) + echo "Kselftest archive kselftest${ext} created!" -# clean up install directory -rm -rf kselftest + # clean up top-level install work directory + rm -rf "$install_work" } main "$@" diff --git a/tools/testing/selftests/kselftest_install.sh b/tools/testing/selftests/kselftest_install.sh index e2e1911d62d5..407af7da7037 100755 --- a/tools/testing/selftests/kselftest_install.sh +++ b/tools/testing/selftests/kselftest_install.sh @@ -6,30 +6,30 @@ # Author: Shuah Khan <shuahkh(a)osg.samsung.com> # Copyright (C) 2015 Samsung Electronics Co., Ltd. -install_loc=`pwd` - main() { - if [ $(basename $install_loc) != "selftests" ]; then + base_dir=`pwd` + install_dir="$base_dir"/kselftest_install + + # Make sure we're in the selftests top-level directory. + if [ $(basename "$base_dir") != "selftests" ]; then echo "$0: Please run it in selftests directory ..." exit 1; fi + + # Only allow installation into an existing location. if [ "$#" -eq 0 ]; then - echo "$0: Installing in default location - $install_loc ..." + echo "$0: Installing in default location - $install_dir ..." elif [ ! -d "$1" ]; then echo "$0: $1 doesn't exist!!" exit 1; else - install_loc=$1 - echo "$0: Installing in specified location - $install_loc ..." + install_dir="$1" + echo "$0: Installing in specified location - $install_dir ..." fi - install_dir=$install_loc/kselftest_install - -# Create install directory - mkdir -p $install_dir -# Build tests - KSFT_INSTALL_PATH=$install_dir make install + # Build tests + KSFT_INSTALL_PATH="$install_dir" make install } main "$@" -- 2.17.1 -- Kees Cook

5 years, 8 months

1
0
0 0

[PATCH v4 0/6] lib/string: Add strscpy_pad() function

by Tobin C. Harding

Hi Shua, Here is the set with cleanup as suggested by Kees on v3. Configured, built, and tested all modules loaded by tools/testing/selftests/lib/*.sh >From previous cover letters ... While doing the testing for strscpy_pad() it was noticed that there is duplication in how test modules are being fed to kselftest and also in the test modules themselves. This set makes an attempt at adding a framework to kselftest for writing kernel test modules. It also adds a script for use in creating script test runners for kselftest. My macro-foo is not great, all criticism and suggestions very much appreciated. The design is based on test modules lib/test_printf.c, lib/test_bitmap.c, lib/test_xarray.c. Changes since last version: - Remove dependency on Bash (thanks Kees) - Use oneliner to implement kselftest test runners (thanks Kees) - Squash patch that adds kselftest script creator script with patch that uses it. - Fix typos (thanks Randy) - Add Kees' Acked-by tags to all patches thanks, Tobin. Tobin C. Harding (6): lib/test_printf: Add empty module_exit function kselftest: Add test runner creation script kselftest: Add test module framework header lib: Use new kselftest header lib/string: Add strscpy_pad() function lib: Add test module for strscpy_pad Documentation/dev-tools/kselftest.rst | 94 +++++++++++- include/linux/string.h | 4 + lib/Kconfig.debug | 3 + lib/Makefile | 1 + lib/string.c | 47 +++++- lib/test_bitmap.c | 20 +-- lib/test_printf.c | 17 +-- lib/test_strscpy.c | 150 +++++++++++++++++++ tools/testing/selftests/kselftest_module.h | 48 ++++++ tools/testing/selftests/kselftest_module.sh | 84 +++++++++++ tools/testing/selftests/lib/Makefile | 2 +- tools/testing/selftests/lib/bitmap.sh | 18 +-- tools/testing/selftests/lib/config | 1 + tools/testing/selftests/lib/prime_numbers.sh | 17 +-- tools/testing/selftests/lib/printf.sh | 19 +-- tools/testing/selftests/lib/strscpy.sh | 3 + 16 files changed, 440 insertions(+), 88 deletions(-) create mode 100644 lib/test_strscpy.c create mode 100644 tools/testing/selftests/kselftest_module.h create mode 100755 tools/testing/selftests/kselftest_module.sh create mode 100755 tools/testing/selftests/lib/strscpy.sh -- 2.21.0

5 years, 8 months

5
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror