- Linux-kselftest-mirror - lists.linaro.org

[PATCH AUTOSEL 5.3 29/99] selftests/bpf: Set rp_filter in test_flow_dissector

by Sasha Levin

From: Jiri Benc <jbenc(a)redhat.com> [ Upstream commit fd418b01fe26c2430b1091675cceb3ab2b52e1e0 ] Many distributions enable rp_filter. However, the flow dissector test generates packets that have 1.1.1.1 set as (inner) source address without this address being reachable. This causes the selftest to fail. The selftests should not assume a particular initial configuration. Switch off rp_filter. Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection") Signed-off-by: Jiri Benc <jbenc(a)redhat.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Acked-by: Petar Penkov <ppenkov(a)google.com> Link: https://lore.kernel.org/bpf/513a298f53e99561d2f70b2e60e2858ea6cda754.157053… Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/bpf/test_flow_dissector.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/testing/selftests/bpf/test_flow_dissector.sh b/tools/testing/selftests/bpf/test_flow_dissector.sh index d23d4da66b834..e2d06191bd35c 100755 --- a/tools/testing/selftests/bpf/test_flow_dissector.sh +++ b/tools/testing/selftests/bpf/test_flow_dissector.sh @@ -63,6 +63,9 @@ fi # Setup tc qdisc add dev lo ingress +echo 0 > /proc/sys/net/ipv4/conf/default/rp_filter +echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter +echo 0 > /proc/sys/net/ipv4/conf/lo/rp_filter echo "Testing IPv4..." # Drops all IP/UDP packets coming from port 9 -- 2.20.1

5 years, 8 months

1
0
0 0

next-20191025 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.4.0-rc4 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 139c2d13c258bacc545fc2a4091f7fb0a6fb08fd git describe: next-20191025 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20191025 Regressions (compared to build next-20191024) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20191024) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 2139 total tests in the following environments and test suites. pass 1100 fail 867 xfail 0 skip 172 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - qemu_arm - qemu_arm64 - qemu_i386 - qemu_x86_64 - x15 - arm - x86_64 Test Suites ----------- * kselftest * kselftest-vsyscall-mode-native * kselftest-vsyscall-mode-none Failures ------------------------------------------------------------------------ dragonboard-410c: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/timers_rtcpie * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh qemu_arm: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_run_netsocktests x15: * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/epoll_epoll_wakeup_test * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_reuseport_bpf_numa * kselftest/net_run_netsocktests qemu_x86_64: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_fsgsbase_64 x86: * kselftest-vsyscall-mode-native/bpf_get_cgroup_id_user * kselftest-vsyscall-mode-native/bpf_test_bpftool_build.sh * kselftest-vsyscall-mode-native/bpf_test_dev_cgroup * kselftest-vsyscall-mode-native/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-native/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-native/bpf_test_maps * kselftest-vsyscall-mode-native/bpf_test_netcnt * kselftest-vsyscall-mode-native/bpf_test_progs * kselftest-vsyscall-mode-native/bpf_test_progs-no_alu32 * kselftest-vsyscall-mode-native/bpf_test_select_reuseport * kselftest-vsyscall-mode-native/bpf_test_skb_cgroup_id.sh * kselftest-vsyscall-mode-native/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-native/bpf_test_socket_cookie * kselftest-vsyscall-mode-native/bpf_test_sock_fields * kselftest-vsyscall-mode-native/bpf_test_sockmap * kselftest-vsyscall-mode-native/bpf_test_sysctl * kselftest-vsyscall-mode-native/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-native/bpf_test_tcpbpf_user * kselftest-vsyscall-mode-native/bpf_test_tcp_check_syncookie.sh * kselftest-vsyscall-mode-native/bpf_test_tcpnotify_user * kselftest-vsyscall-mode-native/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-native/bpf_test_tunnel.sh * kselftest-vsyscall-mode-native/bpf_test_xdping.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_meta.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_redirect.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_vlan_mode_generic.sh * kselftest-vsyscall-mode-native/bpf_test_xdp_vlan_mode_native.sh * kselftest-vsyscall-mode-native/bpf_xdping * kselftest-vsyscall-mode-native/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-native/intel_pstate_run.sh * kselftest-vsyscall-mode-native/kvm_clear_dirty_log_test * kselftest-vsyscall-mode-native/kvm_cr4_cpuid_sync_test * kselftest-vsyscall-mode-native/kvm_dirty_log_test * kselftest-vsyscall-mode-native/kvm_evmcs_test * kselftest-vsyscall-mode-native/kvm_kvm_create_max_vcpus * kselftest-vsyscall-mode-native/kvm_platform_info_test * kselftest-vsyscall-mode-native/kvm_set_sregs_test * kselftest-vsyscall-mode-native/kvm_smm_test * kselftest-vsyscall-mode-native/kvm_state_test * kselftest-vsyscall-mode-native/kvm_sync_regs_test * kselftest-vsyscall-mode-native/kvm_vmx_close_while_nested_test * kselftest-vsyscall-mode-native/kvm_vmx_dirty_log_test * kselftest-vsyscall-mode-native/kvm_vmx_set_nested_state_test * kselftest-vsyscall-mode-native/kvm_vmx_tsc_adjust_test * kselftest-vsyscall-mode-native/lib_bitmap.sh * kselftest-vsyscall-mode-native/lib_prime_numbers.sh * kselftest-vsyscall-mode-native/lib_printf.sh * kselftest-vsyscall-mode-native/lib_strscpy.sh * kselftest-vsyscall-mode-native/mqueue_mq_perf_tests * kselftest-vsyscall-mode-native/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-native/net_fib_tests.sh * kselftest-vsyscall-mode-native/net_ip_defrag.sh * kselftest-vsyscall-mode-native/net_l2tp.sh * kselftest-vsyscall-mode-native/net_pmtu.sh * kselftest-vsyscall-mode-native/net_psock_snd.sh * kselftest-vsyscall-mode-native/net_run_netsocktests * kselftest-vsyscall-mode-native/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-native/net_udpgro_bench.sh * kselftest-vsyscall-mode-native/net_udpgro.sh * kselftest-vsyscall-mode-native/net_udpgso_bench.sh * kselftest-vsyscall-mode-native/net_xfrm_policy.sh * kselftest-vsyscall-mode-native/pstore_pstore_tests * kselftest-vsyscall-mode-native/rseq_run_param_test.sh * kselftest-vsyscall-mode-native/rtc_rtctest * kselftest-vsyscall-mode-native/seccomp_seccomp_benchmark * kselftest-vsyscall-mode-native/timers_set-timer-lat * kselftest-vsyscall-mode-native/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-native/tpm2_test_smoke.sh * kselftest-vsyscall-mode-native/tpm2_test_space.sh * kselftest-vsyscall-mode-native/vm_run_vmtests * kselftest-vsyscall-mode-none/bpf_test_bpftool_build.sh * kselftest-vsyscall-mode-none/bpf_test_flow_dissector.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_ip_encap.sh * kselftest-vsyscall-mode-none/bpf_test_lwt_seg6local.sh * kselftest-vsyscall-mode-none/bpf_test_maps * kselftest-vsyscall-mode-none/bpf_test_netcnt * kselftest-vsyscall-mode-none/bpf_test_progs * kselftest-vsyscall-mode-none/bpf_test_progs-no_alu32 * kselftest-vsyscall-mode-none/bpf_test_select_reuseport * kselftest-vsyscall-mode-none/bpf_test_skb_cgroup_id.sh * kselftest-vsyscall-mode-none/bpf_test_sock_addr.sh * kselftest-vsyscall-mode-none/bpf_test_socket_cookie * kselftest-vsyscall-mode-none/bpf_test_sock_fields * kselftest-vsyscall-mode-none/bpf_test_sockmap * kselftest-vsyscall-mode-none/bpf_test_sysctl * kselftest-vsyscall-mode-none/bpf_test_tc_edt.sh * kselftest-vsyscall-mode-none/bpf_test_tcpbpf_user * kselftest-vsyscall-mode-none/bpf_test_tcp_check_syncookie.sh * kselftest-vsyscall-mode-none/bpf_test_tcpnotify_user * kselftest-vsyscall-mode-none/bpf_test_tc_tunnel.sh * kselftest-vsyscall-mode-none/bpf_test_tunnel.sh * kselftest-vsyscall-mode-none/bpf_test_xdping.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_meta.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_redirect.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_vlan_mode_generic.sh * kselftest-vsyscall-mode-none/bpf_test_xdp_vlan_mode_native.sh * kselftest-vsyscall-mode-none/bpf_xdping * kselftest-vsyscall-mode-none/firmware_fw_run_tests.sh * kselftest-vsyscall-mode-none/intel_pstate_run.sh * kselftest-vsyscall-mode-none/kvm_clear_dirty_log_test * kselftest-vsyscall-mode-none/kvm_cr4_cpuid_sync_test * kselftest-vsyscall-mode-none/kvm_dirty_log_test * kselftest-vsyscall-mode-none/kvm_evmcs_test * kselftest-vsyscall-mode-none/kvm_hyperv_cpuid * kselftest-vsyscall-mode-none/kvm_kvm_create_max_vcpus * kselftest-vsyscall-mode-none/kvm_platform_info_test * kselftest-vsyscall-mode-none/kvm_set_sregs_test * kselftest-vsyscall-mode-none/kvm_smm_test * kselftest-vsyscall-mode-none/kvm_state_test * kselftest-vsyscall-mode-none/kvm_sync_regs_test * kselftest-vsyscall-mode-none/kvm_vmx_close_while_nested_test * kselftest-vsyscall-mode-none/kvm_vmx_dirty_log_test * kselftest-vsyscall-mode-none/kvm_vmx_set_nested_state_test * kselftest-vsyscall-mode-none/kvm_vmx_tsc_adjust_test * kselftest-vsyscall-mode-none/lib_bitmap.sh * kselftest-vsyscall-mode-none/lib_prime_numbers.sh * kselftest-vsyscall-mode-none/lib_printf.sh * kselftest-vsyscall-mode-none/lib_strscpy.sh * kselftest-vsyscall-mode-none/mqueue_mq_perf_tests * kselftest-vsyscall-mode-none/net_fib-onlink-tests.sh * kselftest-vsyscall-mode-none/net_fib_tests.sh * kselftest-vsyscall-mode-none/net_ip_defrag.sh * kselftest-vsyscall-mode-none/net_l2tp.sh * kselftest-vsyscall-mode-none/net_pmtu.sh * kselftest-vsyscall-mode-none/net_psock_snd.sh * kselftest-vsyscall-mode-none/net_run_netsocktests * kselftest-vsyscall-mode-none/net_test_vxlan_under_vrf.sh * kselftest-vsyscall-mode-none/net_udpgro_bench.sh * kselftest-vsyscall-mode-none/net_udpgro.sh * kselftest-vsyscall-mode-none/net_udpgso_bench.sh * kselftest-vsyscall-mode-none/net_xfrm_policy.sh * kselftest-vsyscall-mode-none/pstore_pstore_tests * kselftest-vsyscall-mode-none/rseq_run_param_test.sh * kselftest-vsyscall-mode-none/rtc_rtctest * kselftest-vsyscall-mode-none/seccomp_seccomp_benchmark * kselftest-vsyscall-mode-none/timers_set-timer-lat * kselftest-vsyscall-mode-none/timestamping_txtimestamp.sh * kselftest-vsyscall-mode-none/tpm2_test_smoke.sh * kselftest-vsyscall-mode-none/tpm2_test_space.sh * kselftest-vsyscall-mode-none/vm_run_vmtests * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/firmware_fw_run_tests.sh * kselftest/intel_pstate_run.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/net_xfrm_policy.sh * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/seccomp_seccomp_benchmark * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests qemu_arm64: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh juno-r2: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_rtnetlink.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh qemu_i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/cpufreq_main.sh * kselftest/firmware_fw_run_tests.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/net_xfrm_policy.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/size_get_size * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_ldt_gdt_32 * kselftest/x86_sigreturn_32 i386: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_hashmap * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcp_check_syncookie.sh * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/firmware_fw_run_tests.sh * kselftest/intel_pstate_run.sh * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/mqueue_mq_perf_tests * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_tests.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgso_bench.sh * kselftest/proc_proc-self-map-files-002 * kselftest/proc_proc-self-syscall * kselftest/pstore_pstore_tests * kselftest/rseq_run_param_test.sh * kselftest/rtc_rtctest * kselftest/size_get_size * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh * kselftest/vm_run_vmtests * kselftest/x86_ldt_gdt_32 * kselftest/x86_sigreturn_32 hi6220-hikey: * kselftest/bpf_get_cgroup_id_user * kselftest/bpf_test_bpftool_build.sh * kselftest/bpf_test_dev_cgroup * kselftest/bpf_test_flow_dissector.sh * kselftest/bpf_test_kmod.sh * kselftest/bpf_test_lpm_map * kselftest/bpf_test_lwt_ip_encap.sh * kselftest/bpf_test_lwt_seg6local.sh * kselftest/bpf_test_maps * kselftest/bpf_test_netcnt * kselftest/bpf_test_progs * kselftest/bpf_test_progs-no_alu32 * kselftest/bpf_test_select_reuseport * kselftest/bpf_test_skb_cgroup_id.sh * kselftest/bpf_test_sock_addr.sh * kselftest/bpf_test_socket_cookie * kselftest/bpf_test_sock_fields * kselftest/bpf_test_sockmap * kselftest/bpf_test_sysctl * kselftest/bpf_test_tag * kselftest/bpf_test_tc_edt.sh * kselftest/bpf_test_tcpbpf_user * kselftest/bpf_test_tcpnotify_user * kselftest/bpf_test_tc_tunnel.sh * kselftest/bpf_test_tunnel.sh * kselftest/bpf_test_verifier * kselftest/bpf_test_xdping.sh * kselftest/bpf_test_xdp_meta.sh * kselftest/bpf_test_xdp_redirect.sh * kselftest/bpf_test_xdp_vlan_mode_generic.sh * kselftest/bpf_test_xdp_vlan_mode_native.sh * kselftest/bpf_xdping * kselftest/clone3_clone3_clear_sighand * kselftest/kvm_clear_dirty_log_test * kselftest/kvm_cr4_cpuid_sync_test * kselftest/kvm_dirty_log_test * kselftest/kvm_evmcs_test * kselftest/kvm_hyperv_cpuid * kselftest/kvm_kvm_create_max_vcpus * kselftest/kvm_mmio_warning_test * kselftest/kvm_platform_info_test * kselftest/kvm_set_sregs_test * kselftest/kvm_smm_test * kselftest/kvm_state_test * kselftest/kvm_sync_regs_test * kselftest/kvm_vmx_close_while_nested_test * kselftest/kvm_vmx_dirty_log_test * kselftest/kvm_vmx_set_nested_state_test * kselftest/kvm_vmx_tsc_adjust_test * kselftest/lib_bitmap.sh * kselftest/lib_prime_numbers.sh * kselftest/lib_printf.sh * kselftest/lib_strscpy.sh * kselftest/net_fib-onlink-tests.sh * kselftest/net_fib_rule_tests.sh * kselftest/net_fib_tests.sh * kselftest/netfilter_conntrack_icmp_related.sh * kselftest/netfilter_nft_nat.sh * kselftest/net_ip_defrag.sh * kselftest/net_l2tp.sh * kselftest/net_pmtu.sh * kselftest/net_psock_snd.sh * kselftest/net_run_netsocktests * kselftest/net_tcp_fastopen_backup_key.sh * kselftest/net_test_vxlan_under_vrf.sh * kselftest/net_udpgro_bench.sh * kselftest/net_udpgro.sh * kselftest/net_udpgso_bench.sh * kselftest/pidfd_pidfd_fdinfo_test * kselftest/pidfd_pidfd_test * kselftest/pidfd_pidfd_wait * kselftest/pstore_pstore_tests * kselftest/rseq_basic_percpu_ops_test * kselftest/rtc_rtctest * kselftest/seccomp_seccomp_benchmark * kselftest/timers_set-timer-lat * kselftest/timestamping_txtimestamp.sh * kselftest/tpm2_test_smoke.sh * kselftest/tpm2_test_space.sh Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 8 months

1
0
0 0

Linux-5.4: bpf: test_core_reloc_arrays.o: Segmentation fault with llc -march=bpf

by Prabhakar Kushwaha

Adding other mailing list, folks... Hi All, I am trying to build kselftest on Linux-5.4 on ubuntu 18.04. I installed LLVM-9.0.0 and Clang-9.0.0 from below links after following steps from [1] because of discussion [2] https://releases.llvm.org/9.0.0/llvm-9.0.0.src.tar.xz https://releases.llvm.org/9.0.0/clang-tools-extra-9.0.0.src.tar.xz https://releases.llvm.org/9.0.0/cfe-9.0.0.src.tar.xz Now, i am trying with llc -march=bpf, with this segmentation fault is coming as below: gcc -g -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program test_flow_dissector.c /usr/src/tovards/linux/tools/testing/selftests/bpf/test_stub.o /usr/src/tovards/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /usr/src/tovards/linux/tools/testing/selftests/bpf/test_flow_dissector gcc -g -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program test_tcp_check_syncookie_user.c /usr/src/tovards/linux/tools/testing/selftests/bpf/test_stub.o /usr/src/tovards/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /usr/src/tovards/linux/tools/testing/selftests/bpf/test_tcp_check_syncookie_user gcc -g -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../lib/bpf -I../../../../include/generated -DHAVE_GENHDR -I../../../include -Dbpf_prog_load=bpf_prog_test_load -Dbpf_load_program=bpf_test_load_program test_lirc_mode2_user.c /usr/src/tovards/linux/tools/testing/selftests/bpf/test_stub.o /usr/src/tovards/linux/tools/testing/selftests/bpf/libbpf.a -lcap -lelf -lrt -lpthread -o /usr/src/tovards/linux/tools/testing/selftests/bpf/test_lirc_mode2_user (clang -I. -I./include/uapi -I../../../include/uapi -I/usr/src/tovards/linux/tools/testing/selftests/bpf/../usr/include -D__TARGET_ARCH_arm64 -g -idirafter /usr/local/include -idirafter /usr/local/lib/clang/9.0.0/include -idirafter /usr/include/aarch64-linux-gnu -idirafter /usr/include -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm \ -c progs/test_core_reloc_arrays.c -o - || echo "clang failed") | \ llc -march=bpf -mcpu=probe -filetype=obj -o /usr/src/tovards/linux/tools/testing/selftests/bpf/test_core_reloc_arrays.o Stack dump: 0. Program arguments: llc -march=bpf -mcpu=probe -filetype=obj -o /usr/src/tovards/linux/tools/testing/selftests/bpf/test_core_reloc_arrays.o 1. Running pass 'Function Pass Manager' on module '<stdin>'. 2. Running pass 'BPF Assembly Printer' on function '@test_core_arrays' #0 0x0000aaaac618db08 llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/usr/local/bin/llc+0x152eb08) Segmentation fault Makefile:260: recipe for target '/usr/src/tovards/linux/tools/testing/selftests/bpf/test_core_reloc_arrays.o' failed make[1]: *** [/usr/src/tovards/linux/tools/testing/selftests/bpf/test_core_reloc_arrays.o] Error 139 To add more details, Commenting following lines in bpf/progs/test_core_reloc_arrays.c removes the segmentation fault. --- a/tools/testing/selftests/bpf/progs/test_core_reloc_arrays.c +++ b/tools/testing/selftests/bpf/progs/test_core_reloc_arrays.c @@ -41,15 +41,14 @@ int test_core_arrays(void *ctx) if (BPF_CORE_READ(&out->a2, &in->a[2])) return 1; /* in->b[1][2][3] */ - if (BPF_CORE_READ(&out->b123, &in->b[1][2][3])) - return 1; +// if (BPF_CORE_READ(&out->b123, &in->b[1][2][3])) +// return 1; /* in->c[1].c */ if (BPF_CORE_READ(&out->c1c, &in->c[1].c)) return 1; /* in->d[0][0].d */ - if (BPF_CORE_READ(&out->d00d, &in->d[0][0].d)) - return 1; - +// if (BPF_CORE_READ(&out->d00d, &in->d[0][0].d)) +// return 1; return 0; } It looks to be something related llc and more than 1 dimension array. has anyone faced such error. Please suggest!! --prabhakar(pk) [1] https://stackoverflow.com/questions/47255526/how-to-build-the-latest-clang-… [2] https://www.mail-archive.com/netdev@vger.kernel.org/msg315096.html Linux top-commit ---------------- commit bc88f85c6c09306bd21917e1ae28205e9cd775a7 (HEAD -> master, origin/master, origin/HEAD) Author: Ben Dooks <ben.dooks(a)codethink.co.uk> Date: Wed Oct 16 12:24:58 2019 +0100 kthread: make __kthread_queue_delayed_work static The __kthread_queue_delayed_work is not exported so make it static, to avoid the following sparse warning: kernel/kthread.c:869:6: warning: symbol '__kthread_queue_delayed_work' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks(a)codethink.co.uk> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org>

5 years, 8 months

3
8
0 0

[PATCH] selftests/livepatch: Disable the timeout

by Miroslav Benes

Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test") introduced a timeout per test. Livepatch tests could run longer than 45 seconds, especially on slower machines. They do not hang and they detect if something goes awry with internal accounting. Better than looking for an arbitrary value, just disable the timeout for livepatch selftests. Signed-off-by: Miroslav Benes <mbenes(a)suse.cz> --- tools/testing/selftests/livepatch/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/livepatch/settings diff --git a/tools/testing/selftests/livepatch/settings b/tools/testing/selftests/livepatch/settings new file mode 100644 index 000000000000..e7b9417537fb --- /dev/null +++ b/tools/testing/selftests/livepatch/settings @@ -0,0 +1 @@ +timeout=0 -- 2.23.0

5 years, 8 months

3
2
0 0

[PATCH AUTOSEL 4.19 04/37] rseq/selftests: x86: Work-around bogus gcc-8 optimisation

by Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> [ Upstream commit fe22983d92c15253ea8eb854acbe863fc2313759 ] gcc-8 version 8.1.0, 8.2.0, and 8.3.0 generate broken assembler with asm goto that have a thread-local storage "m" input operand on both x86-32 and x86-64. For instance: __thread int var; static int fct(void) { asm goto ( "jmp %l[testlabel]\n\t" : : [var] "m" (var) : : testlabel); return 0; testlabel: return 1; } int main() { return fct(); } % gcc-8 -O2 -o test-asm-goto test-asm-goto.c /tmp/ccAdHJbe.o: In function `main': test-asm-goto.c:(.text.startup+0x1): undefined reference to `.L2' collect2: error: ld returned 1 exit status % gcc-8 -m32 -O2 -o test-asm-goto test-asm-goto.c /tmp/ccREsVXA.o: In function `main': test-asm-goto.c:(.text.startup+0x1): undefined reference to `.L2' collect2: error: ld returned 1 exit status Work-around this compiler bug in the rseq-x86.h header by passing the address of the __rseq_abi TLS as a register operand rather than using the "m" input operand. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90193 Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> CC: Ingo Molnar <mingo(a)redhat.com> CC: Peter Zijlstra <peterz(a)infradead.org> CC: Thomas Gleixner <tglx(a)linutronix.de> CC: Joel Fernandes <joelaf(a)google.com> CC: Catalin Marinas <catalin.marinas(a)arm.com> CC: Dave Watson <davejwatson(a)fb.com> CC: Will Deacon <will.deacon(a)arm.com> CC: Shuah Khan <shuah(a)kernel.org> CC: Andi Kleen <andi(a)firstfloor.org> CC: linux-kselftest(a)vger.kernel.org CC: "H . Peter Anvin" <hpa(a)zytor.com> CC: Chris Lameter <cl(a)linux.com> CC: Russell King <linux(a)arm.linux.org.uk> CC: Michael Kerrisk <mtk.manpages(a)gmail.com> CC: "Paul E . McKenney" <paulmck(a)linux.vnet.ibm.com> CC: Paul Turner <pjt(a)google.com> CC: Boqun Feng <boqun.feng(a)gmail.com> CC: Josh Triplett <josh(a)joshtriplett.org> CC: Steven Rostedt <rostedt(a)goodmis.org> CC: Ben Maurer <bmaurer(a)fb.com> CC: linux-api(a)vger.kernel.org CC: Andy Lutomirski <luto(a)amacapital.net> CC: Andrew Morton <akpm(a)linux-foundation.org> CC: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rseq/rseq-x86.h | 144 ++++++++++++------------ 1 file changed, 70 insertions(+), 74 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq-x86.h b/tools/testing/selftests/rseq/rseq-x86.h index 089410a314e9d..a5341044a2f59 100644 --- a/tools/testing/selftests/rseq/rseq-x86.h +++ b/tools/testing/selftests/rseq/rseq-x86.h @@ -9,6 +9,16 @@ #define RSEQ_SIG 0x53053053 +/* + * Due to a compiler optimization bug in gcc-8 with asm goto and TLS asm input + * operands, we cannot use "m" input operands, and rather pass the __rseq_abi + * address through a "r" input operand. + */ + +/* Offset of cpu_id and rseq_cs fields in struct rseq. */ +#define RSEQ_CPU_ID_OFFSET 4 +#define RSEQ_CS_OFFSET 8 + #ifdef __x86_64__ #define rseq_smp_mb() \ @@ -51,12 +61,12 @@ do { \ #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ "leaq " __rseq_str(cs_label) "(%%rip), %%rax\n\t" \ - "movq %%rax, %[" __rseq_str(rseq_cs) "]\n\t" \ + "movq %%rax, " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ @@ -84,14 +94,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -102,8 +112,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -141,15 +150,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movq %[v], %%rbx\n\t" "cmpq %%rbx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -164,8 +173,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -200,11 +208,11 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addq %[count], %[v]\n\t" @@ -213,8 +221,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "er" (count) @@ -245,14 +252,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -266,8 +273,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -315,8 +321,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -325,7 +331,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpq %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpq %[v2], %[expect2]\n\t" @@ -338,8 +344,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -385,14 +390,14 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, "movq %[dst], %[rseq_scratch1]\n\t" "movq %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpq %[v], %[expect]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "cmpq %[v], %[expect]\n\t" "jnz 7f\n\t" #endif @@ -440,8 +445,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "r" (expect), @@ -533,12 +537,12 @@ do { \ #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \ RSEQ_INJECT_ASM(1) \ - "movl $" __rseq_str(cs_label) ", %[rseq_cs]\n\t" \ + "movl $" __rseq_str(cs_label) ", " __rseq_str(rseq_cs) "\n\t" \ __rseq_str(label) ":\n\t" #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \ RSEQ_INJECT_ASM(2) \ - "cmpl %[" __rseq_str(cpu_id) "], %[" __rseq_str(current_cpu_id) "]\n\t" \ + "cmpl %[" __rseq_str(cpu_id) "], " __rseq_str(current_cpu_id) "\n\t" \ "jnz " __rseq_str(label) "\n\t" #define RSEQ_ASM_DEFINE_ABORT(label, teardown, abort_label) \ @@ -566,14 +570,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -584,8 +588,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), [v] "m" (*v), [expect] "r" (expect), [newv] "r" (newv) @@ -623,15 +626,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[v], %%ebx\n\t" "cmpl %%ebx, %[expectnot]\n\t" "je %l[error2]\n\t" @@ -646,8 +649,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expectnot] "r" (expectnot), @@ -682,11 +684,11 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) #endif /* final store */ "addl %[count], %[v]\n\t" @@ -695,8 +697,7 @@ int rseq_addv(intptr_t *v, intptr_t count, int cpu) RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [count] "ir" (count) @@ -727,14 +728,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" #endif @@ -749,8 +750,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "m" (newv2), @@ -789,15 +789,15 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "movl %[expect], %%eax\n\t" "cmpl %[v], %%eax\n\t" "jnz %l[error2]\n\t" @@ -813,8 +813,7 @@ int rseq_cmpeqv_trystorev_storev_release(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* try store input */ [v2] "m" (*v2), [newv2] "r" (newv2), @@ -854,8 +853,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, __asm__ __volatile__ goto ( RSEQ_ASM_DEFINE_TABLE(3, 1f, 2f, 4f) /* start, commit, abort */ /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "cmpl %[v], %[expect]\n\t" "jnz %l[cmpfail]\n\t" @@ -864,7 +863,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, "jnz %l[cmpfail]\n\t" RSEQ_INJECT_ASM(5) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, %l[error1]) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1]) "cmpl %[v], %[expect]\n\t" "jnz %l[error2]\n\t" "cmpl %[expect2], %[v2]\n\t" @@ -878,8 +877,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *v, intptr_t expect, RSEQ_ASM_DEFINE_ABORT(4, "", abort) : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* cmp2 input */ [v2] "m" (*v2), [expect2] "r" (expect2), @@ -926,15 +924,15 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -984,8 +982,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), @@ -1034,15 +1031,15 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, "movl %[dst], %[rseq_scratch1]\n\t" "movl %[len], %[rseq_scratch2]\n\t" /* Start rseq by storing table entry pointer into rseq_cs. */ - RSEQ_ASM_STORE_RSEQ_CS(1, 3b, rseq_cs) - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 4f) + RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi])) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f) RSEQ_INJECT_ASM(3) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 5f\n\t" RSEQ_INJECT_ASM(4) #ifdef RSEQ_COMPARE_TWICE - RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, 6f) + RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f) "movl %[expect], %%eax\n\t" "cmpl %%eax, %[v]\n\t" "jnz 7f\n\t" @@ -1093,8 +1090,7 @@ int rseq_cmpeqv_trymemcpy_storev_release(intptr_t *v, intptr_t expect, #endif : /* gcc asm goto does not allow outputs */ : [cpu_id] "r" (cpu), - [current_cpu_id] "m" (__rseq_abi.cpu_id), - [rseq_cs] "m" (__rseq_abi.rseq_cs), + [rseq_abi] "r" (&__rseq_abi), /* final store input */ [v] "m" (*v), [expect] "m" (expect), -- 2.20.1

5 years, 8 months

1
0
0 0

[REVIEW PATCH v5 3/3] tests: add close_range() tests

by Christian Brauner

This adds basic tests for the new close_range() syscall. - test that no invalid flags can be passed - test that a range of file descriptors is correctly closed - test that a range of file descriptors is correctly closed if there there are already closed file descriptors in the range - test that max_fd is correctly capped to the current fdtable maximum Signed-off-by: Christian Brauner <christian.brauner(a)ubuntu.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Jann Horn <jannh(a)google.com> Cc: David Howells <dhowells(a)redhat.com> Cc: Dmitry V. Levin <ldv(a)altlinux.org> Cc: Oleg Nesterov <oleg(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: linux-api(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org --- /* v2 */ unchanged /* v3 */ - Christian Brauner <christian(a)brauner.io>: - verify that close_range() correctly closes a single file descriptor /* v4 */ - Christian Brauner <christian(a)brauner.io>: - add missing Cc for Shuah - add missing Cc for linux-kselftest /* v5 */ - Michael Ellerman <mpe(a)ellerman.id.au>: - remove include of unexported kernel headers - Christian Brauner <christian.brauner(a)ubuntu.com>: - add missing SPDX header to Makefile --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/core/.gitignore | 1 + tools/testing/selftests/core/Makefile | 7 + .../testing/selftests/core/close_range_test.c | 149 ++++++++++++++++++ 4 files changed, 158 insertions(+) create mode 100644 tools/testing/selftests/core/.gitignore create mode 100644 tools/testing/selftests/core/Makefile create mode 100644 tools/testing/selftests/core/close_range_test.c diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index c3feccb99ff5..b0b754b9aa62 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -4,6 +4,7 @@ TARGETS += bpf TARGETS += breakpoints TARGETS += capabilities TARGETS += cgroup +TARGETS += core TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += drivers/dma-buf diff --git a/tools/testing/selftests/core/.gitignore b/tools/testing/selftests/core/.gitignore new file mode 100644 index 000000000000..6e6712ce5817 --- /dev/null +++ b/tools/testing/selftests/core/.gitignore @@ -0,0 +1 @@ +close_range_test diff --git a/tools/testing/selftests/core/Makefile b/tools/testing/selftests/core/Makefile new file mode 100644 index 000000000000..f6f2d6f473c6 --- /dev/null +++ b/tools/testing/selftests/core/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only +CFLAGS += -g -I../../../../usr/include/ + +TEST_GEN_PROGS := close_range_test + +include ../lib.mk + diff --git a/tools/testing/selftests/core/close_range_test.c b/tools/testing/selftests/core/close_range_test.c new file mode 100644 index 000000000000..6d92e239a228 --- /dev/null +++ b/tools/testing/selftests/core/close_range_test.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE +#include <errno.h> +#include <fcntl.h> +#include <linux/kernel.h> +#include <limits.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <syscall.h> +#include <unistd.h> + +#include "../kselftest.h" + +#ifndef __NR_close_range +#define __NR_close_range -1 +#endif + +static inline int sys_close_range(unsigned int fd, unsigned int max_fd, + unsigned int flags) +{ + return syscall(__NR_close_range, fd, max_fd, flags); +} + +#ifndef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif + +int main(int argc, char **argv) +{ + const char *test_name = "close_range"; + int i, ret; + int open_fds[101]; + int fd_max, fd_mid, fd_min; + + ksft_set_plan(9); + + for (i = 0; i < ARRAY_SIZE(open_fds); i++) { + int fd; + + fd = open("/dev/null", O_RDONLY | O_CLOEXEC); + if (fd < 0) { + if (errno == ENOENT) + ksft_exit_skip( + "%s test: skipping test since /dev/null does not exist\n", + test_name); + + ksft_exit_fail_msg( + "%s test: %s - failed to open /dev/null\n", + strerror(errno), test_name); + } + + open_fds[i] = fd; + } + + fd_min = open_fds[0]; + fd_max = open_fds[99]; + + ret = sys_close_range(fd_min, fd_max, 1); + if (!ret) + ksft_exit_fail_msg( + "%s test: managed to pass invalid flag value\n", + test_name); + if (errno == ENOSYS) + ksft_exit_skip("%s test: close_range() syscall not supported\n", test_name); + + ksft_test_result_pass("do not allow invalid flag values for close_range()\n"); + + fd_mid = open_fds[50]; + ret = sys_close_range(fd_min, fd_mid, 0); + if (ret < 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from %d to %d\n", + test_name, fd_min, fd_mid); + ksft_test_result_pass("close_range() from %d to %d\n", fd_min, fd_mid); + + for (i = 0; i <= 50; i++) { + ret = fcntl(open_fds[i], F_GETFL); + if (ret >= 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from %d to %d\n", + test_name, fd_min, fd_mid); + } + ksft_test_result_pass("fcntl() verify closed range from %d to %d\n", fd_min, fd_mid); + + /* create a couple of gaps */ + close(57); + close(78); + close(81); + close(82); + close(84); + close(90); + + fd_mid = open_fds[51]; + /* Choose slightly lower limit and leave some fds for a later test */ + fd_max = open_fds[92]; + ret = sys_close_range(fd_mid, fd_max, 0); + if (ret < 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from 51 to 100\n", + test_name); + ksft_test_result_pass("close_range() from %d to %d\n", fd_mid, fd_max); + + for (i = 51; i <= 92; i++) { + ret = fcntl(open_fds[i], F_GETFL); + if (ret >= 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from 51 to 100\n", + test_name); + } + ksft_test_result_pass("fcntl() verify closed range from %d to %d\n", fd_mid, fd_max); + + fd_mid = open_fds[93]; + fd_max = open_fds[99]; + /* test that the kernel caps and still closes all fds */ + ret = sys_close_range(fd_mid, UINT_MAX, 0); + if (ret < 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from 51 to 100\n", + test_name); + ksft_test_result_pass("close_range() from %d to %d\n", fd_mid, fd_max); + + for (i = 93; i < 100; i++) { + ret = fcntl(open_fds[i], F_GETFL); + if (ret >= 0) + ksft_exit_fail_msg( + "%s test: Failed to close range of file descriptors from 51 to 100\n", + test_name); + } + ksft_test_result_pass("fcntl() verify closed range from %d to %d\n", fd_mid, fd_max); + + ret = sys_close_range(open_fds[100], open_fds[100], 0); + if (ret < 0) + ksft_exit_fail_msg( + "%s test: Failed to close single file descriptor\n", + test_name); + ksft_test_result_pass("close_range() closed single file descriptor\n"); + + ret = fcntl(open_fds[100], F_GETFL); + if (ret >= 0) + ksft_exit_fail_msg( + "%s test: Failed to close single file descriptor\n", + test_name); + ksft_test_result_pass("fcntl() verify closed single file descriptor\n"); + + return ksft_exit_pass(); +} -- 2.23.0

5 years, 8 months

1
0
0 0

[PATCH v9 00/12] Add arm64/signal initial kselftest support

by Cristian Marussi

Hi this patchset aims to add the initial arch-specific arm64 support to kselftest starting with signals-related test-cases. This series is based on v5.4-rc2. A common internal test-case layout is proposed for signal tests and it is wired-up to the toplevel kselftest Makefile, so that it should be possible at the end to run it on an arm64 target in the usual way with KSFT. ~/linux# make TARGETS=arm64 kselftest New KSFT arm64 testcases live inside tools/testing/selftests/arm64 grouped by family inside subdirectories: arm64/signal is the first family proposed with this series. This series converts also to this subdirectory scheme the pre-existing KSFT arm64 tags tests (already merged in v5.3), moving them into their own arm64/tags subdirectory. Thanks Cristian Notes: ----- - further details in the included READMEs - more tests still to be written (current strategy is going through the related Kernel signal-handling code and write a test for each possible and sensible code-path) A few ideas for more TODO testcases: - mangle_pstate_invalid_ssbs_regs: mess with SSBS bits on every possible configured behavior - fake_sigreturn_unmapped_sp: SP into unmapped addrs - fake_sigreturn_kernelspace_sp: SP into kernel addrs - fake_sigreturn_sve_bad_extra_context: SVE extra context badly formed - fake_sigreturn_misaligned_sp_4: misaligned SP by 4 (i.e., __alignof__(struct _aarch64_ctx)) - fake_sigreturn_misaligned_sp_8: misaligned SP by 8 (i.e., sizeof(struct _aarch64_ctx)) - fake_sigreturn_bad_size_non_aligned: a size that doesn't overflow __reserved[], but is not a multiple of 16 - fake_sigreturn_bad_size_tiny: a size that is less than 16 - fake_sigreturn_bad_size_overflow_tiny: a size that does overflow __reserved[], but by less than 16 bytes? - mangle_sve_invalid_extra_context: SVE extra_context invalid - SVE signal testcases and special handling will be part of an additional patch still to be released - KSFT arm64 tags test patch https://lore.kernel.org/linux-arm-kernel/c1e6aad230658bc175b42d92daeff2e300… is relocated into its own directory under tools/testing/selftests/arm64/tags Changes: -------- v8-->v9: - fixed a couple of misplaced .gitignore v7-->v8: - removed SSBS test case - split remnants of SSBS patch (v7 05/11), containing some helpers, into two distinct patches v6-->v7: - rebased on v5.4-rc2 - renamed SUBTARGETS arm64/ toplevel Makefile ENV to ARM64_SUBTARGETS - fixed fake_sigreturn alignment routines (off by one) - fixed SSBS test: avoid using MRS/MSR as whole and SKIP when SSBS not supported - reporting KSFT_SKIP when needed (usually if test_init(0 fails) - using ID_AA64PFR1_EL1.SSBS to check SSBS support instead of HWCAP_SSBS v5-->v6: - added arm64 toplevel Makefile SUBTARGETS env var to be able to selectively build only some arm64/ tests subdirectories - removed unneed toplevel Makefile exports and fixed Copyright - better checks for supported features and features names helpers - converted some run-time critical assert() to abort() to avoid issues when -NDEBUG is set - default_handler() signal handler refactored and split - using SIGTRAP for get_current_context() - use volatile where proper - refactor and relocate test_init() invocation - review usage of MRS SSBS instructions depending on HW_SSBS - cleanup fake_sigreturn trampoline - cleanup get_starting_header helper - avoiding timeout test failures wherever possible (fail immediately if possible) v4-->v5: - rebased on arm64/for-next-core merging 01/11 with KSFT tags tests: commit 9ce1263033cd ("selftests, arm64: add a selftest for passing tagged pointers to kernel") - moved .gitignore up on elevel - moved kernel header search mechanism into KSFT arm64 toplevel Makefile so that it can be used easily also by each arm64 KSFT subsystem inside subdirs of arm64 v3-->v4: - rebased on v5.3-rc6 - added test descriptions - fixed commit messages (imperative mood) - added missing includes and removed unneeded ones - added/used new get_starting_head() helper - fixed/simplified signal.S::fakke_sigreturn() - added set_regval() macro and .init initialization func - better synchonization in get_current_context() - macroization of mangle_pstate_invalid_mode_el - split mangle_pstate_invalid_mode_el h/t - removed standalone mode - simplified CPU features checks - fixed/refactored get_header() and validation routines - simplfied docs v2-->v3: - rebased on v5.3-rc2 - better test result characterization looking for SEGV_ACCERR in si_code on SIGSEGV - using KSFT Framework macros for retvalues - removed SAFE_WRITE()/dump_uc: buggy, un-needed and unused - reviewed generation process of test_arm64_signals.sh runner script - re-added a fixed fake_sigreturn_misaligned_sp testcase and a properly extended fake_sigreturn() helper - added tests' TODO notes v1-->v2: - rebased on 5.2-rc7 - various makefile's cleanups - mixed READMEs fixes - fixed test_arm64_signals.sh runner script - cleaned up assembly code in signal.S - improved get_current_context() logic - fixed SAFE_WRITE() - common support code split into more chunks, each one introduced when needed by some new testcases - fixed some headers validation routines in testcases.c - removed some still broken/immature tests: + fake_sigreturn_misaligned + fake_sigreturn_overflow_reserved + mangle_pc_invalid + mangle_sp_misaligned - fixed some other testcases: + mangle_pstate_ssbs_regs: better checks of SSBS bit when feature unsupported + mangle_pstate_invalid_compat_toggle: name fix + mangle_pstate_invalid_mode_el[1-3]: precautionary zeroing PSTATE.MODE + fake_sigreturn_bad_magic, fake_sigreturn_bad_size, fake_sigreturn_bad_size_for_magic0: - accounting for available space...dropping extra when needed - keeping alignent - new testcases on FPSMID context: + fake_sigreturn_missing_fpsimd + fake_sigreturn_duplicated_fpsimd Cristian Marussi (12): kselftest: arm64: extend toplevel skeleton Makefile kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: extend test_init functionalities kselftest: arm64: add helper get_current_context kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_misaligned_sp tools/testing/selftests/Makefile | 1 + tools/testing/selftests/arm64/Makefile | 64 +++- tools/testing/selftests/arm64/README | 25 ++ .../testing/selftests/arm64/signal/.gitignore | 3 + tools/testing/selftests/arm64/signal/Makefile | 32 ++ tools/testing/selftests/arm64/signal/README | 59 +++ .../testing/selftests/arm64/signal/signals.S | 64 ++++ .../selftests/arm64/signal/test_signals.c | 29 ++ .../selftests/arm64/signal/test_signals.h | 116 ++++++ .../arm64/signal/test_signals_utils.c | 340 ++++++++++++++++++ .../arm64/signal/test_signals_utils.h | 120 +++++++ .../testcases/fake_sigreturn_bad_magic.c | 52 +++ .../testcases/fake_sigreturn_bad_size.c | 77 ++++ .../fake_sigreturn_bad_size_for_magic0.c | 46 +++ .../fake_sigreturn_duplicated_fpsimd.c | 50 +++ .../testcases/fake_sigreturn_misaligned_sp.c | 37 ++ .../testcases/fake_sigreturn_missing_fpsimd.c | 50 +++ .../mangle_pstate_invalid_compat_toggle.c | 31 ++ .../mangle_pstate_invalid_daif_bits.c | 35 ++ .../mangle_pstate_invalid_mode_el1h.c | 15 + .../mangle_pstate_invalid_mode_el1t.c | 15 + .../mangle_pstate_invalid_mode_el2h.c | 15 + .../mangle_pstate_invalid_mode_el2t.c | 15 + .../mangle_pstate_invalid_mode_el3h.c | 15 + .../mangle_pstate_invalid_mode_el3t.c | 15 + .../mangle_pstate_invalid_mode_template.h | 28 ++ .../arm64/signal/testcases/testcases.c | 196 ++++++++++ .../arm64/signal/testcases/testcases.h | 104 ++++++ .../selftests/arm64/{ => tags}/.gitignore | 0 tools/testing/selftests/arm64/tags/Makefile | 7 + .../arm64/{ => tags}/run_tags_test.sh | 0 .../selftests/arm64/{ => tags}/tags_test.c | 0 32 files changed, 1651 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/arm64/README create mode 100644 tools/testing/selftests/arm64/signal/.gitignore create mode 100644 tools/testing/selftests/arm64/signal/Makefile create mode 100644 tools/testing/selftests/arm64/signal/README create mode 100644 tools/testing/selftests/arm64/signal/signals.S create mode 100644 tools/testing/selftests/arm64/signal/test_signals.c create mode 100644 tools/testing/selftests/arm64/signal/test_signals.h create mode 100644 tools/testing/selftests/arm64/signal/test_signals_utils.c create mode 100644 tools/testing/selftests/arm64/signal/test_signals_utils.h create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_magic.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_bad_size_for_magic0.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_duplicated_fpsimd.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_misaligned_sp.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_missing_fpsimd.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_compat_toggle.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_daif_bits.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el1h.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el1t.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el2h.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el2t.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el3h.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_el3t.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/mangle_pstate_invalid_mode_template.h create mode 100644 tools/testing/selftests/arm64/signal/testcases/testcases.c create mode 100644 tools/testing/selftests/arm64/signal/testcases/testcases.h rename tools/testing/selftests/arm64/{ => tags}/.gitignore (100%) create mode 100644 tools/testing/selftests/arm64/tags/Makefile rename tools/testing/selftests/arm64/{ => tags}/run_tags_test.sh (100%) rename tools/testing/selftests/arm64/{ => tags}/tags_test.c (100%) -- 2.17.1

5 years, 8 months

2
14
0 0

next-20191024 kselftest results

by ci_notify＠linaro.org

Summary ------------------------------------------------------------------------ kernel: 5.4.0-rc4 git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git branch: master git commit: 12d61c6996999e6562cbbed5f270d572248a11c5 git describe: next-20191024 Test details: https://qa-reports.linaro.org/lkft/linux-next-oe/build/next-20191024 Regressions (compared to build next-20191023) ------------------------------------------------------------------------ No regressions Fixes (compared to build next-20191023) ------------------------------------------------------------------------ No fixes In total: ------------------------------------------------------------------------ Ran 0 total tests in the following environments and test suites. pass 0 fail 0 xfail 0 skip 0 Environments -------------- - dragonboard-410c - arm64 - hi6220-hikey - arm64 - i386 - juno-r2 - arm64 - x15 - arm - x86_64 Test Suites ----------- Failures ------------------------------------------------------------------------ i386: x86: x15: juno-r2: dragonboard-410c: hi6220-hikey: Skips ------------------------------------------------------------------------ No skips -- Linaro LKFT https://lkft.linaro.org

5 years, 8 months

3
2
0 0

[PATCH v14 0/6] open: introduce openat2(2) syscall

by Aleksa Sarai

This patchset is being developed here: <https://github.com/cyphar/linux/tree/openat2/master> Patch changelog: v14: * The magic-link changes (and O_EMPTYPATH) have been dropped from this series -- they will be developed and sent separately. The main reason is that we need to restrict things other than open(2) (examples include truncate(2) as well as mount(MS_BIND)). This will require a fair amount of extra work, and there's no point stalling openat2(2) for that work to be completed. * Minor rework of 'struct open_how': * To avoid future headaches, make it a non-const argument. * Expand ->flags and ->resolve to 64-bit fields to allow for more flag extensions without needing to add separate fields too early. This requires adding a bit of explicit padding (32 bits) to avoid userspace putting garbage in the alignment padding -- this can be repurposed for future extensions. * upgrade_mask is dropped (and will be a separate field when we add it again in the future) to avoid userspace foot-guns. * Expand -EINVAL checks in build_open_flags(). Rather than silently ignoring silly flag combinations (such as O_TMPFILE|O_PATH or O_PATH|<most flags>), give an -EINVAL. All of the silent ignore semantics were added to open(2) because we couldn't return -EINVAL -- but we can now! * open(2) and openat(2) clean up their flags before passing them to build_open_flags(), so all mixed flags will continue to work. There is one exception which is (O_PATH|O_TMPFILE) -- this is no longer permitted (as far as I can tell this appears to be a bug, and there are no userspace users that I've hit after running this code for a few days). If it turns out that userspace does depend on (O_PATH|O_TMPFILE) working, we can only disallow it for openat2(2). * Don't zero out nd->root in complete_walk() for RCU-walk if we're doing a scoped-lookup (this prevents a needless REF-walk retry). * Attempt all tests on kernels that don't have openat2(2), rather than just skipping everything. v13: <https://lore.kernel.org/lkml/20190930183316.10190-1-cyphar@cyphar.com/> v12: <https://lore.kernel.org/lkml/20190904201933.10736-1-cyphar@cyphar.com/> v11: <https://lore.kernel.org/lkml/20190820033406.29796-1-cyphar@cyphar.com/> <https://lore.kernel.org/lkml/20190728010207.9781-1-cyphar@cyphar.com/> v10: <https://lore.kernel.org/lkml/20190719164225.27083-1-cyphar@cyphar.com/> v09: <https://lore.kernel.org/lkml/20190706145737.5299-1-cyphar@cyphar.com/> v08: <https://lore.kernel.org/lkml/20190520133305.11925-1-cyphar@cyphar.com/> v07: <https://lore.kernel.org/lkml/20190507164317.13562-1-cyphar@cyphar.com/> v06: <https://lore.kernel.org/lkml/20190506165439.9155-1-cyphar@cyphar.com/> v05: <https://lore.kernel.org/lkml/20190320143717.2523-1-cyphar@cyphar.com/> v04: <https://lore.kernel.org/lkml/20181112142654.341-1-cyphar@cyphar.com/> v03: <https://lore.kernel.org/lkml/20181009070230.12884-1-cyphar@cyphar.com/> v02: <https://lore.kernel.org/lkml/20181009065300.11053-1-cyphar@cyphar.com/> v01: <https://lore.kernel.org/lkml/20180929103453.12025-1-cyphar@cyphar.com/> For a very long time, extending openat(2) with new features has been incredibly frustrating. This stems from the fact that openat(2) is possibly the most famous counter-example to the mantra "don't silently accept garbage from userspace" -- it doesn't check whether unknown flags are present[1]. This means that (generally) the addition of new flags to openat(2) has been fraught with backwards-compatibility issues (O_TMPFILE has to be defined as __O_TMPFILE|O_DIRECTORY|[O_RDWR or O_WRONLY] to ensure old kernels gave errors, since it's insecure to silently ignore the flag[2]). All new security-related flags therefore have a tough road to being added to openat(2). Furthermore, the need for some sort of control over VFS's path resolution (to avoid malicious paths resulting in inadvertent breakouts) has been a very long-standing desire of many userspace applications. This patchset is a revival of Al Viro's old AT_NO_JUMPS[3] patchset (which was a variant of David Drysdale's O_BENEATH patchset[4] which was a spin-off of the Capsicum project[5]) with a few additions and changes made based on the previous discussion within [6] as well as others I felt were useful. In line with the conclusions of the original discussion of AT_NO_JUMPS, the flag has been split up into separate flags. However, instead of being an openat(2) flag it is provided through a new syscall openat2(2) which provides several other improvements to the openat(2) interface (see the patch description for more details). The following new LOOKUP_* flags are added: * LOOKUP_NO_XDEV blocks all mountpoint crossings (upwards, downwards, or through absolute links). Absolute pathnames alone in openat(2) do not trigger this. Magic-link traversal which implies a vfsmount jump is also blocked (though magic-link jumps on the same vfsmount are permitted). * LOOKUP_NO_MAGICLINKS blocks resolution through /proc/$pid/fd-style links. This is done by blocking the usage of nd_jump_link() during resolution in a filesystem. The term "magic-links" is used to match with the only reference to these links in Documentation/, but I'm happy to change the name. It should be noted that this is different to the scope of ~LOOKUP_FOLLOW in that it applies to all path components. However, you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it will *not* fail (assuming that no parent component was a magic-link), and you will have an fd for the magic-link. In order to correctly detect magic-links, the introduction of a new LOOKUP_MAGICLINK_JUMPED state flag was required. * LOOKUP_BENEATH disallows escapes to outside the starting dirfd's tree, using techniques such as ".." or absolute links. Absolute paths in openat(2) are also disallowed. Conceptually this flag is to ensure you "stay below" a certain point in the filesystem tree -- but this requires some additional to protect against various races that would allow escape using "..". Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it can trivially beam you around the filesystem (breaking the protection). In future, there might be similar safety checks done as in LOOKUP_IN_ROOT, but that requires more discussion. In addition, two new flags are added that expand on the above ideas: * LOOKUP_NO_SYMLINKS does what it says on the tin. No symlink resolution is allowed at all, including magic-links. Just as with LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an fd for the symlink as long as no parent path had a symlink component. * LOOKUP_IN_ROOT is an extension of LOOKUP_BENEATH that, rather than blocking attempts to move past the root, forces all such movements to be scoped to the starting point. This provides chroot(2)-like protection but without the cost of a chroot(2) for each filesystem operation, as well as being safe against race attacks that chroot(2) is not. If a race is detected (as with LOOKUP_BENEATH) then an error is generated, and similar to LOOKUP_BENEATH it is not permitted to cross magic-links with LOOKUP_IN_ROOT. The primary need for this is from container runtimes, which currently need to do symlink scoping in userspace[7] when opening paths in a potentially malicious container. There is a long list of CVEs that could have bene mitigated by having RESOLVE_THIS_ROOT (such as CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and CVE-2019-5736, just to name a few). In order to make all of the above more usable, I'm working on libpathrs[8] which is a C-friendly library for safe path resolution. It features a userspace-emulated backend if the kernel doesn't support openat2(2). Hopefully we can get userspace to switch to using it, and thus get openat2(2) support for free once it's ready. [1]: https://lwn.net/Articles/588444/ [2]: https://lore.kernel.org/lkml/CA+55aFyyxJL1LyXZeBsf2ypriraj5ut1XkNDsunRBqgVj… [3]: https://lore.kernel.org/lkml/20170429220414.GT29622@ZenIV.linux.org.uk [4]: https://lore.kernel.org/lkml/1415094884-18349-1-git-send-email-drysdale@goo… [5]: https://lore.kernel.org/lkml/1404124096-21445-1-git-send-email-drysdale@goo… [6]: https://lwn.net/Articles/723057/ [7]: https://github.com/cyphar/filepath-securejoin [8]: https://github.com/openSUSE/libpathrs The current draft of the openat2(2) man-page is included below. --8<--------------------------------------------------------------------------- OPENAT2(2) Linux Programmer's Manual OPENAT2(2) NAME openat2 - open and possibly create a file (extended) SYNOPSIS #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> int openat2(int dirfd, const char *pathname, struct open_how *how, size_t size); Note: There is no glibc wrapper for this system call; see NOTES. DESCRIPTION The openat2() system call opens the file specified by pathname. If the specified file does not exist, it may optionally (if O_CREAT is specified in how.flags) be created by openat2(). As with openat(2), if pathname is relative, then it is interpreted relative to the directory referred to by the file descriptor dirfd (or the current working directory of the calling process, if dirfd is the special value AT_FDCWD.) If pathname is absolute, then dirfd is ignored (unless how.resolve contains RESOLVE_IN_ROOT, in which case pathname is resolved relative to dirfd.) The openat2() system call is an extension of openat(2) and provides a superset of its functionality. Rather than taking a single flag argument, an extensible structure (how) is passed instead to allow for future extensions. size must be set to sizeof(struct open_how), to facilitate future extensions (see the "Extensibility" section of the NOTES for more detail on how extensions are handled.) The open_how structure The following structure indicates how pathname should be opened, and acts as a superset of the flag and mode arguments to openat(2). struct open_how { __aligned_u64 flags; /* O_* flags. */ __u16 mode; /* Mode for O_{CREAT,TMPFILE}. */ __u16 __padding[3]; /* Must be zeroed. */ __aligned_u64 resolve; /* RESOLVE_* flags. */ }; Any future extensions to openat2() will be implemented as new fields appended to the above structure (or through reuse of pre-existing padding space), with the zero value of the new fields acting as though the extension were not present. The meaning of each field is as follows: flags The file creation and status flags to use for this operation. All of the O_* flags defined for openat(2) are valid openat2() flag values. Unlike openat(2), it is an error to provide openat2() unknown or conflicting flags in flags. mode File mode for the new file, with identical semantics to the mode argument to openat(2). However, unlike openat(2), it is an error to provide openat2() with a mode which contains bits other than 0777. It is an error to provide openat2() a non-zero mode if flags does not contain O_CREAT or O_TMPFILE. resolve Change how the components of pathname will be resolved (see path_resolution(7) for background information.) The primary use case for these flags is to allow trusted programs to restrict how untrusted paths (or paths inside untrusted directories) are resolved. The full list of resolve flags is given below. RESOLVE_NO_XDEV Disallow traversal of mount points during path resolution (including all bind mounts). Users of this flag are encouraged to make its use configurable (unless it is used for a specific security purpose), as bind mounts are very widely used by end-users. Setting this flag indiscrimnately for all uses of openat2() may result in spurious errors on previously-functional systems. RESOLVE_NO_SYMLINKS Disallow resolution of symbolic links during path resolution. This option implies RESOLVE_NO_MAGICLINKS. If the trailing component is a symbolic link, and flags contains both O_PATH and O_NOFOLLOW, then an O_PATH file descriptor referencing the symbolic link will be returned. Users of this flag are encouraged to make its use configurable (unless it is used for a specific security purpose), as symbolic links are very widely used by end-users. Setting this flag indiscrimnately for all uses of openat2() may result in spurious errors on previously-functional systems. RESOLVE_NO_MAGICLINKS Disallow all magic link resolution during path resolution. If the trailing component is a magic link, and flags contains both O_PATH and O_NOFOLLOW, then an O_PATH file descriptor referencing the magic link will be returned. Magic-links are symbolic link-like objects that are most notably found in proc(5) (examples include /proc/[pid]/exe and /proc/[pid]/fd/*.) Due to the potential danger of unknowingly opening these magic links, it may be preferable for users to disable their resolution entirely (see symboliclink(7) for more details.) RESOLVE_BENEATH Do not permit the path resolution to succeed if any component of the resolution is not a descendant of the directory indicated by dirfd. This results in absolute symbolic links (and absolute values of pathname) to be rejected. Currently, this flag also disables magic link resolution. However, this may change in the future. The caller should explicitly specify RESOLVE_NO_MAGICLINKS to ensure that magic links are not resolved. RESOLVE_IN_ROOT Treat dirfd as the root directory while resolving pathname (as though the user called chroot(2) with dirfd as the argument.) Absolute symbolic links and ".." path components will be scoped to dirfd. If pathname is an absolute path, it is also treated relative to dirfd. However, unlike chroot(2) (which changes the filesystem root permanently for a process), RESOLVE_IN_ROOT allows a program to efficiently restrict path resolution for only certain operations. It also has several hardening features (such detecting escape attempts during .. resolution) which chroot(2) does not. Currently, this flag also disables magic link resolution. However, this may change in the future. The caller should explicitly specify RESOLVE_NO_MAGICLINKS to ensure that magic links are not resolved. It is an error to provide openat2() unknown flags in resolve. RETURN VALUE On success, a new file descriptor is returned. On error, -1 is returned, and errno is set appropriately. ERRORS The set of errors returned by openat2() includes all of the errors returned by openat(2), as well as the following additional errors: EINVAL An unknown flag or invalid value was specified in how. EINVAL mode is non-zero, but flags does not contain O_CREAT or O_TMPFILE. EINVAL size was smaller than any known version of struct open_how. E2BIG An extension was specified in how, which the current kernel does not support (see the "Extensibility" section of the NOTES for more detail on how extensions are handled.) EAGAIN resolve contains either RESOLVE_IN_ROOT or RESOLVE_BENEATH, and the kernel could not ensure that a ".." component didn't escape (due to a race condition or potential attack.) Callers may choose to retry the openat2() call. EXDEV resolve contains either RESOLVE_IN_ROOT or RESOLVE_BENEATH, and an escape from the root during path resolution was detected. EXDEV resolve contains RESOLVE_NO_XDEV, and a path component attempted to cross a mount point. ELOOP resolve contains RESOLVE_NO_SYMLINKS, and one of the path components was a symbolic link (or magic link). ELOOP resolve contains RESOLVE_NO_MAGICLINKS, and one of the path components was a magic link. VERSIONS openat2() was added to Linux in kernel 5.FOO. CONFORMING TO This system call is Linux-specific. The semantics of RESOLVE_BENEATH were modelled after FreeBSD's O_BENEATH. NOTES Glibc does not provide a wrapper for this system call; call it using systemcall(2). Extensibility In order to allow for struct open_how to be extended in future kernel revisions, openat2() requires userspace to specify the size of struct open_how structure they are passing. By providing this information, it is possible for openat2() to provide both forwards- and backwards-compatibility — with size acting as an implicit version number (because new extension fields will always be appended, the size will always increase.) This extensibility design is very similar to other system calls such as perf_setattr(2), perf_event_open(2), and clone(3). If we let usize be the size of the structure according to userspace and ksize be the size of the structure which the kernel supports, then there are only three cases to consider: * If ksize equals usize, then there is no version mismatch and how can be used verbatim. * If ksize is larger than usize, then there are some extensions the kernel supports which the userspace program is unaware of. Because all extensions must have their zero values be a no-op, the kernel treats all of the extension fields not set by userspace to have zero values. This provides backwards- compatibility. * If ksize is smaller than usize, then there are some extensions which the userspace program is aware of but the kernel does not support. Because all extensions must have their zero values be a no-op, the kernel can safely ignore the unsupported extension fields if they are all-zero. If any unsupported extension fields are non-zero, then -1 is returned and errno is set to E2BIG. This provides forwards-compatibility. Therefore, most userspace programs will not need to have any special handling of extensions. However, if a userspace program wishes to determine what extensions the running kernel supports, they may conduct a binary search on size (to find the largest value which doesn't produce an error of E2BIG.) SEE ALSO openat(2), path_resolution(7), symboliclink(7) Linux 2019-10-10 OPENAT2(2) --8<--------------------------------------------------------------------------- Aleksa Sarai (6): namei: O_BENEATH-style resolution restriction flags namei: LOOKUP_IN_ROOT: chroot-like path resolution namei: permit ".." resolution with LOOKUP_{IN_ROOT,BENEATH} open: introduce openat2(2) syscall selftests: add openat2(2) selftests Documentation: path-lookup: mention LOOKUP_MAGICLINK_JUMPED CREDITS | 4 +- Documentation/filesystems/path-lookup.rst | 18 +- arch/alpha/kernel/syscalls/syscall.tbl | 1 + arch/arm/tools/syscall.tbl | 1 + arch/arm64/include/asm/unistd.h | 2 +- arch/arm64/include/asm/unistd32.h | 2 + arch/ia64/kernel/syscalls/syscall.tbl | 1 + arch/m68k/kernel/syscalls/syscall.tbl | 1 + arch/microblaze/kernel/syscalls/syscall.tbl | 1 + arch/mips/kernel/syscalls/syscall_n32.tbl | 1 + arch/mips/kernel/syscalls/syscall_n64.tbl | 1 + arch/mips/kernel/syscalls/syscall_o32.tbl | 1 + arch/parisc/kernel/syscalls/syscall.tbl | 1 + arch/powerpc/kernel/syscalls/syscall.tbl | 1 + arch/s390/kernel/syscalls/syscall.tbl | 1 + arch/sh/kernel/syscalls/syscall.tbl | 1 + arch/sparc/kernel/syscalls/syscall.tbl | 1 + arch/x86/entry/syscalls/syscall_32.tbl | 1 + arch/x86/entry/syscalls/syscall_64.tbl | 1 + arch/xtensa/kernel/syscalls/syscall.tbl | 1 + fs/namei.c | 167 +++++- fs/open.c | 154 ++++-- include/linux/fcntl.h | 12 +- include/linux/namei.h | 12 + include/linux/syscalls.h | 3 + include/uapi/asm-generic/unistd.h | 5 +- include/uapi/linux/fcntl.h | 41 ++ tools/testing/selftests/Makefile | 1 + tools/testing/selftests/openat2/.gitignore | 1 + tools/testing/selftests/openat2/Makefile | 8 + tools/testing/selftests/openat2/helpers.c | 109 ++++ tools/testing/selftests/openat2/helpers.h | 107 ++++ .../testing/selftests/openat2/openat2_test.c | 297 ++++++++++ .../selftests/openat2/rename_attack_test.c | 160 ++++++ .../testing/selftests/openat2/resolve_test.c | 523 ++++++++++++++++++ 35 files changed, 1571 insertions(+), 71 deletions(-) create mode 100644 tools/testing/selftests/openat2/.gitignore create mode 100644 tools/testing/selftests/openat2/Makefile create mode 100644 tools/testing/selftests/openat2/helpers.c create mode 100644 tools/testing/selftests/openat2/helpers.h create mode 100644 tools/testing/selftests/openat2/openat2_test.c create mode 100644 tools/testing/selftests/openat2/rename_attack_test.c create mode 100644 tools/testing/selftests/openat2/resolve_test.c -- 2.23.0

5 years, 8 months

2
10
0 0

[PATCH v2 linux-kselftest-test 0/3] kunit: support building core/tests as modules

by Alan Maguire

The current kunit execution model is to provide base kunit functionality and tests built-in to the kernel. The aim of this series is to allow building kunit itself and tests as modules. This in turn allows a simple form of selective execution; load the module you wish to test. In doing so, kunit itself (if also built as a module) will be loaded as an implicit dependency. Because this requires a core API modification - if a module delivers multiple suites, they must be declared with the kunit_test_suites() macro - we're proposing this patch as a candidate to be applied to the test tree before too many kunit consumers appear. We attempt to deal with existing consumers in patch 1. Changes since v1: - sent correct patch set; apologies, previous patch set was built prior to kunit move to lib/ and should be ignored. Patch 1 consists changes needed to support loading tests as modules. Patch 2 allows kunit itself to be loaded as a module. Patch 3 documents module support. Alan Maguire (3): kunit: allow kunit tests to be loaded as a module kunit: allow kunit to be loaded as a module kunit: update documentation to describe module-based build Documentation/dev-tools/kunit/faq.rst | 3 ++- Documentation/dev-tools/kunit/index.rst | 3 +++ Documentation/dev-tools/kunit/usage.rst | 16 ++++++++++++++++ include/kunit/test.h | 30 +++++++++++++++++++++++------- kernel/sysctl-test.c | 6 +++++- lib/Kconfig.debug | 4 ++-- lib/kunit/Kconfig | 6 +++--- lib/kunit/Makefile | 4 +++- lib/kunit/assert.c | 8 ++++++++ lib/kunit/example-test.c | 6 +++++- lib/kunit/string-stream-test.c | 9 +++++++-- lib/kunit/string-stream.c | 7 +++++++ lib/kunit/test-test.c | 8 ++++++-- lib/kunit/test.c | 12 ++++++++++++ lib/kunit/try-catch.c | 8 ++++++-- 15 files changed, 108 insertions(+), 22 deletions(-) -- 1.8.3.1

5 years, 8 months

4
17
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror