- Linux-kselftest-mirror - lists.linaro.org

[PATCH v6] lib: add basic KUnit test for lib/math

by Daniel Latypov

Add basic test coverage for files that don't require any config options: * part of math.h (what seem to be the most commonly used macros) * gcd.c * lcm.c * int_sqrt.c * reciprocal_div.c (Ignored int_pow.c since it's a simple textbook algorithm.) These tests aren't particularly interesting, but they * provide short and simple examples of parameterized tests * provide a place to add tests for any new files in this dir * are written so adding new test cases to cover edge cases should be easy * looking at code coverage, we hit all the branches in the .c files Signed-off-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: David Gow <davidgow(a)google.com> --- Changes since v5: * add in test cases for roundup/rounddown * address misc comments from David Changes since v4: * add in test cases for some math.h macros (abs, round_up/round_down, div_round_down/closest) * use parameterized testing less to keep things terser Changes since v3: * fix `checkpatch.pl --strict` warnings * add test cases for gcd(0,0) and lcm(0,0) * minor: don't test both gcd(a,b) and gcd(b,a) when a == b Changes since v2: mv math_test.c => math_kunit.c Changes since v1: * Rebase and rewrite to use the new parameterized testing support. * misc: fix overflow in literal and inline int_sqrt format string. * related: commit 1f0e943df68a ("Documentation: kunit: provide guidance for testing many inputs") was merged explaining the patterns shown here. * there's an in-flight patch to update it for parameterized testing. --- lib/math/Kconfig | 12 ++ lib/math/Makefile | 2 + lib/math/math_kunit.c | 291 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 305 insertions(+) create mode 100644 lib/math/math_kunit.c diff --git a/lib/math/Kconfig b/lib/math/Kconfig index f19bc9734fa7..a974d4db0f9c 100644 --- a/lib/math/Kconfig +++ b/lib/math/Kconfig @@ -15,3 +15,15 @@ config PRIME_NUMBERS config RATIONAL bool + +config MATH_KUNIT_TEST + tristate "KUnit test for lib/math and math.h" if !KUNIT_ALL_TESTS + depends on KUNIT + default KUNIT_ALL_TESTS + help + This builds unit tests for lib/math and math.h. + + For more information on KUnit and unit tests in general, please refer + to the KUnit documentation in Documentation/dev-tools/kunit/. + + If unsure, say N. diff --git a/lib/math/Makefile b/lib/math/Makefile index be6909e943bd..30abb7a8d564 100644 --- a/lib/math/Makefile +++ b/lib/math/Makefile @@ -4,3 +4,5 @@ obj-y += div64.o gcd.o lcm.o int_pow.o int_sqrt.o reciprocal_div.o obj-$(CONFIG_CORDIC) += cordic.o obj-$(CONFIG_PRIME_NUMBERS) += prime_numbers.o obj-$(CONFIG_RATIONAL) += rational.o + +obj-$(CONFIG_MATH_KUNIT_TEST) += math_kunit.o diff --git a/lib/math/math_kunit.c b/lib/math/math_kunit.c new file mode 100644 index 000000000000..556c23b17c3c --- /dev/null +++ b/lib/math/math_kunit.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Simple KUnit suite for math helper funcs that are always enabled. + * + * Copyright (C) 2020, Google LLC. + * Author: Daniel Latypov <dlatypov(a)google.com> + */ + +#include <kunit/test.h> +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/lcm.h> +#include <linux/reciprocal_div.h> + +static void abs_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, abs((char)0), (char)0); + KUNIT_EXPECT_EQ(test, abs((char)42), (char)42); + KUNIT_EXPECT_EQ(test, abs((char)-42), (char)42); + + /* The expression in the macro is actually promoted to an int. */ + KUNIT_EXPECT_EQ(test, abs((short)0), 0); + KUNIT_EXPECT_EQ(test, abs((short)42), 42); + KUNIT_EXPECT_EQ(test, abs((short)-42), 42); + + KUNIT_EXPECT_EQ(test, abs(0), 0); + KUNIT_EXPECT_EQ(test, abs(42), 42); + KUNIT_EXPECT_EQ(test, abs(-42), 42); + + KUNIT_EXPECT_EQ(test, abs(0L), 0L); + KUNIT_EXPECT_EQ(test, abs(42L), 42L); + KUNIT_EXPECT_EQ(test, abs(-42L), 42L); + + KUNIT_EXPECT_EQ(test, abs(0LL), 0LL); + KUNIT_EXPECT_EQ(test, abs(42LL), 42LL); + KUNIT_EXPECT_EQ(test, abs(-42LL), 42LL); + + /* Unsigned types get casted to signed. */ + KUNIT_EXPECT_EQ(test, abs(0ULL), 0LL); + KUNIT_EXPECT_EQ(test, abs(42ULL), 42LL); +} + +static void int_sqrt_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, int_sqrt(0UL), 0UL); + KUNIT_EXPECT_EQ(test, int_sqrt(1UL), 1UL); + KUNIT_EXPECT_EQ(test, int_sqrt(4UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(5UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(8UL), 2UL); + KUNIT_EXPECT_EQ(test, int_sqrt(1UL << 30), 1UL << 15); +} + +static void round_up_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, round_up(0, 1), 0); + KUNIT_EXPECT_EQ(test, round_up(1, 2), 2); + KUNIT_EXPECT_EQ(test, round_up(3, 2), 4); + KUNIT_EXPECT_EQ(test, round_up((1 << 30) - 1, 2), 1 << 30); + KUNIT_EXPECT_EQ(test, round_up((1 << 30) - 1, 1 << 29), 1 << 30); +} + +static void round_down_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, round_down(0, 1), 0); + KUNIT_EXPECT_EQ(test, round_down(1, 2), 0); + KUNIT_EXPECT_EQ(test, round_down(3, 2), 2); + KUNIT_EXPECT_EQ(test, round_down((1 << 30) - 1, 2), (1 << 30) - 2); + KUNIT_EXPECT_EQ(test, round_down((1 << 30) - 1, 1 << 29), 1 << 29); +} + +/* These versions can round to numbers that aren't a power of two */ +static void roundup_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, roundup(0, 1), 0); + KUNIT_EXPECT_EQ(test, roundup(1, 2), 2); + KUNIT_EXPECT_EQ(test, roundup(3, 2), 4); + KUNIT_EXPECT_EQ(test, roundup((1 << 30) - 1, 2), 1 << 30); + KUNIT_EXPECT_EQ(test, roundup((1 << 30) - 1, 1 << 29), 1 << 30); + + KUNIT_EXPECT_EQ(test, roundup(3, 2), 4); + KUNIT_EXPECT_EQ(test, roundup(4, 3), 6); +} + +static void rounddown_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, rounddown(0, 1), 0); + KUNIT_EXPECT_EQ(test, rounddown(1, 2), 0); + KUNIT_EXPECT_EQ(test, rounddown(3, 2), 2); + KUNIT_EXPECT_EQ(test, rounddown((1 << 30) - 1, 2), (1 << 30) - 2); + KUNIT_EXPECT_EQ(test, rounddown((1 << 30) - 1, 1 << 29), 1 << 29); + + KUNIT_EXPECT_EQ(test, rounddown(3, 2), 2); + KUNIT_EXPECT_EQ(test, rounddown(4, 3), 3); +} + +static void div_round_up_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(0, 1), 0); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(20, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 10), 3); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 20), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_UP(21, 99), 1); +} + +static void div_round_closest_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(0, 1), 0); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(20, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(21, 10), 2); + KUNIT_EXPECT_EQ(test, DIV_ROUND_CLOSEST(25, 10), 3); +} + +/* Generic test case for unsigned long inputs. */ +struct test_case { + unsigned long a, b; + unsigned long result; +}; + +static struct test_case gcd_cases[] = { + { + .a = 0, .b = 0, + .result = 0, + }, + { + .a = 0, .b = 1, + .result = 1, + }, + { + .a = 2, .b = 2, + .result = 2, + }, + { + .a = 2, .b = 4, + .result = 2, + }, + { + .a = 3, .b = 5, + .result = 1, + }, + { + .a = 3 * 9, .b = 3 * 5, + .result = 3, + }, + { + .a = 3 * 5 * 7, .b = 3 * 5 * 11, + .result = 15, + }, + { + .a = 1 << 21, + .b = (1 << 21) - 1, + .result = 1, + }, +}; + +KUNIT_ARRAY_PARAM(gcd, gcd_cases, NULL); + +static void gcd_test(struct kunit *test) +{ + const char *message_fmt = "gcd(%lu, %lu)"; + const struct test_case *test_param = test->param_value; + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + gcd(test_param->a, test_param->b), + message_fmt, test_param->a, + test_param->b); + + if (test_param->a == test_param->b) + return; + + /* gcd(a,b) == gcd(b,a) */ + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + gcd(test_param->b, test_param->a), + message_fmt, test_param->b, + test_param->a); +} + +static struct test_case lcm_cases[] = { + { + .a = 0, .b = 0, + .result = 0, + }, + { + .a = 0, .b = 1, + .result = 0, + }, + { + .a = 1, .b = 2, + .result = 2, + }, + { + .a = 2, .b = 2, + .result = 2, + }, + { + .a = 3 * 5, .b = 3 * 7, + .result = 3 * 5 * 7, + }, +}; + +KUNIT_ARRAY_PARAM(lcm, lcm_cases, NULL); + +static void lcm_test(struct kunit *test) +{ + const char *message_fmt = "lcm(%lu, %lu)"; + const struct test_case *test_param = test->param_value; + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + lcm(test_param->a, test_param->b), + message_fmt, test_param->a, + test_param->b); + + if (test_param->a == test_param->b) + return; + + /* lcm(a,b) == lcm(b,a) */ + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + lcm(test_param->b, test_param->a), + message_fmt, test_param->b, + test_param->a); +} + +struct u32_test_case { + u32 a, b; + u32 result; +}; + +static struct u32_test_case reciprocal_div_cases[] = { + { + .a = 0, .b = 1, + .result = 0, + }, + { + .a = 42, .b = 20, + .result = 2, + }, + { + .a = 42, .b = 9999, + .result = 0, + }, + { + .a = (1 << 16), .b = (1 << 14), + .result = 1 << 2, + }, +}; + +KUNIT_ARRAY_PARAM(reciprocal_div, reciprocal_div_cases, NULL); + +static void reciprocal_div_test(struct kunit *test) +{ + const struct u32_test_case *test_param = test->param_value; + struct reciprocal_value rv = reciprocal_value(test_param->b); + + KUNIT_EXPECT_EQ_MSG(test, test_param->result, + reciprocal_divide(test_param->a, rv), + "reciprocal_divide(%u, %u)", + test_param->a, test_param->b); +} + +static void reciprocal_scale_test(struct kunit *test) +{ + KUNIT_EXPECT_EQ(test, reciprocal_scale(0u, 100), 0u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u, 100), 0u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u << 4, 1 << 28), 1u); + KUNIT_EXPECT_EQ(test, reciprocal_scale(1u << 16, 1 << 28), 1u << 12); + KUNIT_EXPECT_EQ(test, reciprocal_scale(~0u, 1 << 28), (1u << 28) - 1); +} + +static struct kunit_case math_test_cases[] = { + KUNIT_CASE(abs_test), + KUNIT_CASE(int_sqrt_test), + KUNIT_CASE(round_up_test), + KUNIT_CASE(round_down_test), + KUNIT_CASE(roundup_test), + KUNIT_CASE(rounddown_test), + KUNIT_CASE(div_round_up_test), + KUNIT_CASE(div_round_closest_test), + KUNIT_CASE_PARAM(gcd_test, gcd_gen_params), + KUNIT_CASE_PARAM(lcm_test, lcm_gen_params), + KUNIT_CASE_PARAM(reciprocal_div_test, reciprocal_div_gen_params), + KUNIT_CASE(reciprocal_scale_test), + {} +}; + +static struct kunit_suite math_test_suite = { + .name = "lib-math", + .test_cases = math_test_cases, +}; + +kunit_test_suites(&math_test_suite); + +MODULE_LICENSE("GPL v2"); base-commit: 7e25f40eab52c57ff6772d27d2aef3640a3237d7 -- 2.31.1.368.gbe11c130af-goog

1 year, 7 months

5
5
0 0

[PATCH v6 8/8] selftests/pcie_bwctrl: Create selftests

by Ilpo Järvinen

Create selftests for PCIe BW control through the PCIe cooling device sysfs interface. First, the BW control selftest finds the PCIe Port to test with. By default, the PCIe Port with the highest Link Speed is selected but another PCIe Port can be provided with -d parameter. The actual test steps the cur_state of the cooling device one-by-one from max_state to what the cur_state was initially. The speed change is confirmed by observing the current_link_speed for the corresponding PCIe Port. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> --- MAINTAINERS | 1 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/pcie_bwctrl/Makefile | 2 + .../pcie_bwctrl/set_pcie_cooling_state.sh | 122 ++++++++++++++++++ .../selftests/pcie_bwctrl/set_pcie_speed.sh | 67 ++++++++++ 5 files changed, 193 insertions(+) create mode 100644 tools/testing/selftests/pcie_bwctrl/Makefile create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh create mode 100755 tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh diff --git a/MAINTAINERS b/MAINTAINERS index 3a94ae81b13f..5a3b69515256 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17106,6 +17106,7 @@ S: Supported F: drivers/pci/pcie/bwctrl.c F: drivers/thermal/pcie_cooling.c F: include/linux/pci-bwctrl.h +F: tools/testing/selftests/pcie_bwctrl/ PCIE DRIVER FOR AMAZON ANNAPURNA LABS M: Jonathan Chocron <jonnyc(a)amazon.com> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index e1504833654d..ac0bc8af4123 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -65,6 +65,7 @@ TARGETS += net/openvswitch TARGETS += net/tcp_ao TARGETS += netfilter TARGETS += nsfs +TARGETS += pcie_bwctrl TARGETS += perf_events TARGETS += pidfd TARGETS += pid_namespace diff --git a/tools/testing/selftests/pcie_bwctrl/Makefile b/tools/testing/selftests/pcie_bwctrl/Makefile new file mode 100644 index 000000000000..3e84e26341d1 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/Makefile @@ -0,0 +1,2 @@ +TEST_PROGS = set_pcie_cooling_state.sh +include ../lib.mk diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh new file mode 100755 index 000000000000..9df606552af3 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_cooling_state.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + +SYSFS= +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +retval=0 +skipmsg="skip all tests:" + +PCIEPORTTYPE="PCIe_Port_Link_Speed" + +prerequisite() +{ + local ports + + if [ $UID != 0 ]; then + echo $skipmsg must be run as root >&2 + exit $ksft_skip + fi + + SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'` + + if [ ! -d "$SYSFS" ]; then + echo $skipmsg sysfs is not mounted >&2 + exit $ksft_skip + fi + + if ! ls $SYSFS/class/thermal/cooling_device* > /dev/null 2>&1; then + echo $skipmsg thermal cooling devices missing >&2 + exit $ksft_skip + fi + + ports=`grep -e "^$PCIEPORTTYPE" $SYSFS/class/thermal/cooling_device*/type | wc -l` + if [ $ports -eq 0 ]; then + echo $skipmsg pcie cooling devices missing >&2 + exit $ksft_skip + fi +} + +testport= +find_pcie_port() +{ + local patt="$1" + local pcieports + local max + local cur + local delta + local bestdelta=-1 + + pcieports=`grep -l -F -e "$patt" /sys/class/thermal/cooling_device*/type` + if [ -z "$pcieports" ]; then + return + fi + pcieports=${pcieports//\/type/} + # Find the port with the highest PCIe Link Speed + for port in $pcieports; do + max=`cat $port/max_state` + cur=`cat $port/cur_state` + delta=$((max-cur)) + if [ $delta -gt $bestdelta ]; then + testport="$port" + bestdelta=$delta + fi + done +} + +sysfspcidev= +find_sysfs_pci_dev() +{ + local typefile="$1/type" + local pcidir + + pcidir="$SYSFS/bus/pci/devices/`sed -e "s|^${PCIEPORTTYPE}_||g" $typefile`" + + if [ -r "$pcidir/current_link_speed" ]; then + sysfspcidev="$pcidir/current_link_speed" + fi +} + +usage() +{ + echo "Usage $0 [ -d dev ]" + echo -e "\t-d: PCIe port BDF string (e.g., 0000:00:04.0)" +} + +pattern="$PCIEPORTTYPE" +parse_arguments() +{ + while getopts d:h opt; do + case $opt in + h) + usage "$0" + exit 0 + ;; + d) + pattern="$PCIEPORTTYPE_$OPTARG" + ;; + *) + usage "$0" + exit 0 + ;; + esac + done +} + +parse_arguments "$@" +prerequisite +find_pcie_port "$pattern" +if [ -z "$testport" ]; then + echo $skipmsg "pcie cooling device not found from sysfs" >&2 + exit $ksft_skip +fi +find_sysfs_pci_dev "$testport" +if [ -z "$sysfspcidev" ]; then + echo $skipmsg "PCIe port device not found from sysfs" >&2 + exit $ksft_skip +fi + +./set_pcie_speed.sh "$testport" "$sysfspcidev" +retval=$? + +exit $retval diff --git a/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh new file mode 100755 index 000000000000..584596949312 --- /dev/null +++ b/tools/testing/selftests/pcie_bwctrl/set_pcie_speed.sh @@ -0,0 +1,67 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + +set -e + +TESTNAME=set_pcie_speed + +declare -a PCIELINKSPEED=( + "2.5 GT/s PCIe" + "5.0 GT/s PCIe" + "8.0 GT/s PCIe" + "16.0 GT/s PCIe" + "32.0 GT/s PCIe" + "64.0 GT/s PCIe" +) + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 +retval=0 + +coolingdev="$1" +statefile="$coolingdev/cur_state" +maxfile="$coolingdev/max_state" +linkspeedfile="$2" + +oldstate=`cat $statefile` +maxstate=`cat $maxfile` + +set_state() +{ + local state=$1 + local linkspeed + local expected_linkspeed + + echo $state > $statefile + + sleep 1 + + linkspeed="`cat $linkspeedfile`" + expected_linkspeed=$((maxstate-state)) + expected_str="${PCIELINKSPEED[$expected_linkspeed]}" + if [ ! "${expected_str}" = "${linkspeed}" ]; then + echo "$TESTNAME failed: expected: ${expected_str}; got ${linkspeed}" + retval=1 + fi +} + +cleanup_skip () +{ + set_state $oldstate + exit $ksft_skip +} + +trap cleanup_skip EXIT + +echo "$TESTNAME: testing states $maxstate .. $oldstate with $coolingdev" +for i in $(seq $maxstate -1 $oldstate); do + set_state "$i" +done + +trap EXIT +if [ $retval -eq 0 ]; then + echo "$TESTNAME [PASS]" +else + echo "$TESTNAME [FAIL]" +fi +exit $retval -- 2.39.2

1 year, 7 months

1
0
0 0

[PATCH net] selftests/net/lib: no need to record ns name if it already exist

by Hangbin Liu

There is no need to add the name to ns_list again if the netns already recoreded. Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- tools/testing/selftests/net/lib.sh | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index f9fe182dfbd4..56a9454b7ba3 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -73,15 +73,17 @@ setup_ns() local ns="" local ns_name="" local ns_list="" + local ns_exist= for ns_name in "$@"; do # Some test may setup/remove same netns multi times if unset ${ns_name} 2> /dev/null; then ns="${ns_name,,}-$(mktemp -u XXXXXX)" eval readonly ${ns_name}="$ns" + ns_exist=false else eval ns='$'${ns_name} cleanup_ns "$ns" - + ns_exist=true fi if ! ip netns add "$ns"; then @@ -90,7 +92,7 @@ setup_ns() return $ksft_skip fi ip -n "$ns" link set lo up - ns_list="$ns_list $ns" + ! $ns_exist && ns_list="$ns_list $ns" done NS_LIST="$NS_LIST $ns_list" } -- 2.43.0

1 year, 7 months

3
2
0 0

[PATCH net-next] selftests: net: local_termination: annotate the expected failures

by Jakub Kicinski

Vladimir said when adding this test: The bridge driver fares particularly badly [...] mainly because it does not implement IFF_UNICAST_FLT. See commit 90b9566aa5cd ("selftests: forwarding: add a test for local_termination.sh"). We don't want to hide the known gaps, but having a test which always fails prevents us from catching regressions. Report the cases we know may fail as XFAIL. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: vladimir.oltean(a)nxp.com CC: shuah(a)kernel.org CC: petrm(a)nvidia.com CC: liuhangbin(a)gmail.com CC: bpoirier(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/forwarding/lib.sh | 9 ++++++++ .../net/forwarding/local_termination.sh | 21 ++++++++++++++----- 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 3353a1745946..4fe28ab5d8b9 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -605,6 +605,15 @@ log_test_xfail() RET=$ksft_xfail retmsg= log_test "$@" } +log_test_xfail() +{ + local test_name=$1 + local opt_str=$2 + + printf "TEST: %-60s [XFAIL]\n" "$test_name $opt_str" + return 0 +} + log_info() { local msg=$1 diff --git a/tools/testing/selftests/net/forwarding/local_termination.sh b/tools/testing/selftests/net/forwarding/local_termination.sh index c5b0cbc85b3e..4bba9c78db3e 100755 --- a/tools/testing/selftests/net/forwarding/local_termination.sh +++ b/tools/testing/selftests/net/forwarding/local_termination.sh @@ -73,6 +73,10 @@ check_rcv() local pattern=$3 local should_receive=$4 local should_fail= + local xfail_sw=$5 + + local kind=$(ip -j -d link show dev $if_name | + jq -r '.[].linkinfo.info_kind') [ $should_receive = true ] && should_fail=0 || should_fail=1 RET=0 @@ -81,7 +85,14 @@ check_rcv() check_err_fail "$should_fail" "$?" "reception" - log_test "$if_name: $type" + # If not a SW interface, ignore the XFAIL allowance + [ "$kind" != veth ] && [ "$kind" != bridge ] && xfail_sw= + + if [ $RET -ne 0 ] && [ "$xfail_sw" == true ]; then + log_test_xfail "$if_name: $type" + else + log_test "$if_name: $type" + fi } mc_route_prepare() @@ -157,7 +168,7 @@ run_test() check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address" \ "$smac > $UNKNOWN_UC_ADDR1, ethertype IPv4 (0x0800)" \ - false + false true check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, promisc" \ "$smac > $UNKNOWN_UC_ADDR2, ethertype IPv4 (0x0800)" \ @@ -165,7 +176,7 @@ run_test() check_rcv $rcv_if_name "Unicast IPv4 to unknown MAC address, allmulti" \ "$smac > $UNKNOWN_UC_ADDR3, ethertype IPv4 (0x0800)" \ - false + false true check_rcv $rcv_if_name "Multicast IPv4 to joined group" \ "$smac > $JOINED_MACV4_MC_ADDR, ethertype IPv4 (0x0800)" \ @@ -173,7 +184,7 @@ run_test() check_rcv $rcv_if_name "Multicast IPv4 to unknown group" \ "$smac > $UNKNOWN_MACV4_MC_ADDR1, ethertype IPv4 (0x0800)" \ - false + false true check_rcv $rcv_if_name "Multicast IPv4 to unknown group, promisc" \ "$smac > $UNKNOWN_MACV4_MC_ADDR2, ethertype IPv4 (0x0800)" \ @@ -189,7 +200,7 @@ run_test() check_rcv $rcv_if_name "Multicast IPv6 to unknown group" \ "$smac > $UNKNOWN_MACV6_MC_ADDR1, ethertype IPv6 (0x86dd)" \ - false + false true check_rcv $rcv_if_name "Multicast IPv6 to unknown group, promisc" \ "$smac > $UNKNOWN_MACV6_MC_ADDR2, ethertype IPv6 (0x86dd)" \ -- 2.45.0

1 year, 7 months

4
8
0 0

[PATCH v4 00/30] NT synchronization primitive driver

by Elizabeth Figura

This patch series implements a new char misc driver, /dev/ntsync, which is used to implement Windows NT synchronization primitives. NT synchronization primitives are unique in that the wait functions both are vectored, operate on multiple types of object with different behaviour (mutex, semaphore, event), and affect the state of the objects they wait on. This model is not compatible with existing kernel synchronization objects or interfaces, and therefore the ntsync driver implements its own wait queues and locking. Hence I would like to request review from someone familiar with locking to make sure that the usage of low-level kernel primitives is correct and that the wait queues work as intended, and to that end I've CC'd the locking maintainers. == Background == The Wine project emulates the Windows API in user space. One particular part of that API, namely the NT synchronization primitives, have historically been implemented via RPC to a dedicated "kernel" process. However, more recent applications use these APIs more strenuously, and the overhead of RPC has become a bottleneck. The NT synchronization APIs are too complex to implement on top of existing primitives without sacrificing correctness. Certain operations, such as NtPulseEvent() or the "wait-for-all" mode of NtWaitForMultipleObjects(), require direct control over the underlying wait queue, and implementing a wait queue sufficiently robust for Wine in user space is not possible. This proposed driver, therefore, implements the problematic interfaces directly in the Linux kernel. This driver was presented at Linux Plumbers Conference 2023. For those further interested in the history of synchronization in Wine and past attempts to solve this problem in user space, a recording of the presentation can be viewed here: https://www.youtube.com/watch?v=NjU4nyWyhU8 == Performance == The gain in performance varies wildly depending on the application in question and the user's hardware. For some games NT synchronization is not a bottleneck and no change can be observed, but for others frame rate improvements of 50 to 150 percent are not atypical. The following table lists frame rate measurements from a variety of games on a variety of hardware, taken by users Dmitry Skvortsov, FuzzyQuils, OnMars, and myself: Game Upstream ntsync improvement =========================================================================== Anger Foot 69 99 43% Call of Juarez 99.8 224.1 125% Dirt 3 110.6 860.7 678% Forza Horizon 5 108 160 48% Lara Croft: Temple of Osiris 141 326 131% Metro 2033 164.4 199.2 21% Resident Evil 2 26 77 196% The Crew 26 51 96% Tiny Tina's Wonderlands 130 360 177% Total War Saga: Troy 109 146 34% =========================================================================== == Patches == The intended semantics of the patches are broadly intended to match those of the corresponding Windows functions. For those not already familiar with the Windows functions (or their undocumented behaviour), patch 27/27 provides a detailed specification, and individual patches also include a brief description of the API they are implementing. The patches making use of this driver in Wine can be retrieved or browsed here: https://repo.or.cz/wine/zf.git/shortlog/refs/heads/ntsync5 == Implementation == Some aspects of the implementation may deserve particular comment: * In the interest of performance, each object is governed only by a single spinlock. However, NTSYNC_IOC_WAIT_ALL requires that the state of multiple objects be changed as a single atomic operation. In order to achieve this, we first take a device-wide lock ("wait_all_lock") any time we are going to lock more than one object at a time. The maximum number of objects that can be used in a vectored wait, and therefore the maximum that can be locked simultaneously, is 64. This number is NT's own limit. The acquisition of multiple spinlocks will degrade performance. This is a conscious choice, however. Wait-for-all is known to be a very rare operation in practice, especially with counts that approach the maximum, and it is the intent of the ntsync driver to optimize wait-for-any at the expense of wait-for-all as much as possible. * NT mutexes are tied to their threads on an OS level, and the kernel includes builtin support for "robust" mutexes. In order to keep the ntsync driver self-contained and avoid touching more code than necessary, it does not hook into task exit nor use pids. Instead, the user space emulator is expected to manage thread IDs and pass them as an argument to any relevant functions; this is the "owner" field of ntsync_wait_args and ntsync_mutex_args. When the emulator detects that a thread dies, it should therefore call NTSYNC_IOC_MUTEX_KILL on any open mutexes. * ntsync is module-capable mostly because there was nothing preventing it, and because it aided development. It is not a hard requirement, though. == Previous versions == Changes from v3: * Add .gitignore and use KHDR_INCLUDES in selftest build files, per Muhammad Usama Anjum. * Try to explain why we are rolling our own primitives a little better, per Greg Kroah-Hartman. * Link to v3: https://lore.kernel.org/lkml/20240329000621.148791-1-zfigura@codeweavers.co… * Link to v2: https://lore.kernel.org/lkml/20240219223833.95710-1-zfigura@codeweavers.com/ * Link to v1: https://lore.kernel.org/lkml/20240214233645.9273-1-zfigura@codeweavers.com/ * Link to RFC v2: https://lore.kernel.org/lkml/20240131021356.10322-1-zfigura@codeweavers.com/ * Link to RFC v1: https://lore.kernel.org/lkml/20240124004028.16826-1-zfigura@codeweavers.com/ Elizabeth Figura (27): ntsync: Introduce NTSYNC_IOC_WAIT_ANY. ntsync: Introduce NTSYNC_IOC_WAIT_ALL. ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX. ntsync: Introduce NTSYNC_IOC_MUTEX_UNLOCK. ntsync: Introduce NTSYNC_IOC_MUTEX_KILL. ntsync: Introduce NTSYNC_IOC_CREATE_EVENT. ntsync: Introduce NTSYNC_IOC_EVENT_SET. ntsync: Introduce NTSYNC_IOC_EVENT_RESET. ntsync: Introduce NTSYNC_IOC_EVENT_PULSE. ntsync: Introduce NTSYNC_IOC_SEM_READ. ntsync: Introduce NTSYNC_IOC_MUTEX_READ. ntsync: Introduce NTSYNC_IOC_EVENT_READ. ntsync: Introduce alertable waits. selftests: ntsync: Add some tests for semaphore state. selftests: ntsync: Add some tests for mutex state. selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY. selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL. selftests: ntsync: Add some tests for wakeup signaling with WINESYNC_IOC_WAIT_ANY. selftests: ntsync: Add some tests for wakeup signaling with WINESYNC_IOC_WAIT_ALL. selftests: ntsync: Add some tests for manual-reset event state. selftests: ntsync: Add some tests for auto-reset event state. selftests: ntsync: Add some tests for wakeup signaling with events. selftests: ntsync: Add tests for alertable waits. selftests: ntsync: Add some tests for wakeup signaling via alerts. selftests: ntsync: Add a stress test for contended waits. maintainers: Add an entry for ntsync. docs: ntsync: Add documentation for the ntsync uAPI. Documentation/userspace-api/index.rst | 1 + Documentation/userspace-api/ntsync.rst | 399 +++++ MAINTAINERS | 9 + drivers/misc/ntsync.c | 925 ++++++++++- include/uapi/linux/ntsync.h | 39 + tools/testing/selftests/Makefile | 1 + .../selftests/drivers/ntsync/.gitignore | 1 + .../testing/selftests/drivers/ntsync/Makefile | 7 + tools/testing/selftests/drivers/ntsync/config | 1 + .../testing/selftests/drivers/ntsync/ntsync.c | 1407 +++++++++++++++++ 10 files changed, 2786 insertions(+), 4 deletions(-) create mode 100644 Documentation/userspace-api/ntsync.rst create mode 100644 tools/testing/selftests/drivers/ntsync/.gitignore create mode 100644 tools/testing/selftests/drivers/ntsync/Makefile create mode 100644 tools/testing/selftests/drivers/ntsync/config create mode 100644 tools/testing/selftests/drivers/ntsync/ntsync.c base-commit: ebbc1a4789c666846b9854ef845a37a64879e5f9 -- 2.43.0

1 year, 7 months

4
54
0 0

[RFC PATCH 0/4] selftests/binderfs: Fixes to binderfs_test

by Abhinav Saxena

Hi everyone, My name is Abhinav Saxena. I am a graduate student at the University of Calgary. This is my first patch series for the Linux kernel. I am applying for the "Linux kernel Bug Fixing Summer Unpaid 2024". Apologies in advance if I made any trivial mistakes :) This patch mainly includes issues reported by checkpatch.pl. The changes include: - Running clang-format on `binderfs_test.c` to fix formatting issues. - Updates the macro close_prot_errno_disarm macro. Testing: I tested patches on my local machine (ARM64 ubuntu) with checkpatch.pl and running the selftests. Best, Abhinav Abhinav Saxena (4): run clang-format on bindergfs test update close_prot_errno_disarm macro to do{...}while(false) structure for safety Macro argument 'fd' may be better as '(fd)' to avoid precedence issues add missing a blank line after declarations; fix alignment formatting .../filesystems/binderfs/binderfs_test.c | 204 +++++++++++------- 1 file changed, 126 insertions(+), 78 deletions(-) -- 2.34.1

1 year, 7 months

2
6
0 0

[PATCH v4 00/11] Add support for a few Zc* extensions as well as Zcmop

by Clément Léger

Add support for (yet again) more RVA23U64 missing extensions. Add support for Zcmop, Zca, Zcf, Zcd and Zcb extensions isa string parsing, hwprobe and kvm support. Zce, Zcmt and Zcmp extensions have been left out since they target microcontrollers/embedded CPUs and are not needed by RVA23U64. Since Zc* extensions states that C implies Zca, Zcf (if F and RV32), Zcd (if D), this series modifies the way ISA string is parsed and now does it in two phases. First one parses the string and the second one validates it for the final ISA description. This series is based on the Zimop one [1]. An additional fix [2] should be applied to correctly test that series. Link: https://lore.kernel.org/linux-riscv/20240404103254.1752834-1-cleger@rivosin… [1] Link: https://lore.kernel.org/all/20240409143839.558784-1-cleger@rivosinc.com/ [2] --- v4: - Modify validate() callbacks to return an 0, -EPROBEDEFER or another error. - v3: https://lore.kernel.org/all/20240423124326.2532796-1-cleger@rivosinc.com/ v3: - Fix typo "exists" -> "exist" - Remove C implies Zca, Zcd, Zcf, dt-bindings rules - Rework ISA string resolver to handle dependencies - v2: https://lore.kernel.org/all/20240418124300.1387978-1-cleger@rivosinc.com/ v2: - Add Zc* dependencies validation in dt-bindings - v1: https://lore.kernel.org/lkml/20240410091106.749233-1-cleger@rivosinc.com/ Clément Léger (11): dt-bindings: riscv: add Zca, Zcf, Zcd and Zcb ISA extension description riscv: add ISA extensions validation riscv: add ISA parsing for Zca, Zcf, Zcd and Zcb riscv: hwprobe: export Zca, Zcf, Zcd and Zcb ISA extensions RISC-V: KVM: Allow Zca, Zcf, Zcd and Zcb extensions for Guest/VM KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test dt-bindings: riscv: add Zcmop ISA extension description riscv: add ISA extension parsing for Zcmop riscv: hwprobe: export Zcmop ISA extension RISC-V: KVM: Allow Zcmop extension for Guest/VM KVM: riscv: selftests: Add Zcmop extension to get-reg-list test Documentation/arch/riscv/hwprobe.rst | 24 ++ .../devicetree/bindings/riscv/extensions.yaml | 90 ++++++ arch/riscv/include/asm/cpufeature.h | 1 + arch/riscv/include/asm/hwcap.h | 5 + arch/riscv/include/uapi/asm/hwprobe.h | 5 + arch/riscv/include/uapi/asm/kvm.h | 5 + arch/riscv/kernel/cpufeature.c | 259 ++++++++++++------ arch/riscv/kernel/sys_hwprobe.c | 5 + arch/riscv/kvm/vcpu_onereg.c | 10 + .../selftests/kvm/riscv/get-reg-list.c | 20 ++ 10 files changed, 337 insertions(+), 87 deletions(-) -- 2.43.0

1 year, 7 months

3
26
0 0

[PATCH net v2] selftests: net: kill smcrouted in the cleanup logic in amt.sh

by Taehee Yoo

The amt.sh requires smcrouted for multicasting routing. So, it starts smcrouted before forwarding tests. It must be stopped after all tests, but it isn't. To fix this issue, it kills smcrouted in the cleanup logic. Fixes: c08e8baea78e ("selftests: add amt interface selftest script") Signed-off-by: Taehee Yoo <ap420073(a)gmail.com> --- The v1 patch is here: https://lore.kernel.org/netdev/20240508040643.229383-1-ap420073@gmail.com/ v2 - Headline change. - Kill smcrouted process only if amt.pid exists. - Do not remove the return value. - Remove timeout logic because it was already fixed by following commit 4c639b6a7b9d ("selftests: net: move amt to socat for better compatibility") - Fix shebang. tools/testing/selftests/net/amt.sh | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/amt.sh b/tools/testing/selftests/net/amt.sh index 5175a42cbe8a..d458b45c775b 100755 --- a/tools/testing/selftests/net/amt.sh +++ b/tools/testing/selftests/net/amt.sh @@ -1,4 +1,4 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: GPL-2.0 # Author: Taehee Yoo <ap420073(a)gmail.com> @@ -77,6 +77,7 @@ readonly LISTENER=$(mktemp -u listener-XXXXXXXX) readonly GATEWAY=$(mktemp -u gateway-XXXXXXXX) readonly RELAY=$(mktemp -u relay-XXXXXXXX) readonly SOURCE=$(mktemp -u source-XXXXXXXX) +readonly SMCROUTEDIR="$(mktemp -d)" ERR=4 err=0 @@ -85,6 +86,11 @@ exit_cleanup() for ns in "$@"; do ip netns delete "${ns}" 2>/dev/null || true done + if [ -f "$SMCROUTEDIR/amt.pid" ]; then + smcpid=$(< $SMCROUTEDIR/amt.pid) + kill $smcpid + fi + rm -rf $SMCROUTEDIR exit $ERR } @@ -167,7 +173,7 @@ setup_iptables() setup_mcast_routing() { - ip netns exec "${RELAY}" smcrouted + ip netns exec "${RELAY}" smcrouted -P $SMCROUTEDIR/amt.pid ip netns exec "${RELAY}" smcroutectl a relay_src \ 172.17.0.2 239.0.0.1 amtr ip netns exec "${RELAY}" smcroutectl a relay_src \ -- 2.34.1

1 year, 7 months

2
2
0 0

[PATCH bpf-next 0/9] add netns helpers

by Geliang Tang

From: Geliang Tang <tanggeliang(a)kylinos.cn> This patchset addresses Alexei's comment for commit "Handle SIGINT when creating netns" [1]. Export local helpers create_netns() and cleanup_netns() defined in mptcp.c into network_helpers.c as generic ones. For this another helper unshare_netns() is added to replace the existing local helpers create_netns(). [1] https://patchwork.kernel.org/project/mptcp/patch/20240507-upstream-bpf-next… Geliang Tang (9): selftests/bpf: Add unshare_netns helper selftests/bpf: Use unshare_netns helper selftests/bpf: Drop duplicate create_netns selftests/bpf: Export create_netns helper selftests/bpf: Use create_netns helper selftests/bpf: Export cleanup_netns helper selftests/bpf: Use cleanup_netns helper selftests/bpf: Use netns helpers in lwt tests selftests/bpf: Use netns helpers in test_tunnel tools/testing/selftests/bpf/network_helpers.c | 67 +++++++++++++++++++ tools/testing/selftests/bpf/network_helpers.h | 3 + .../selftests/bpf/prog_tests/assign_reuse.c | 12 +--- .../selftests/bpf/prog_tests/bind_perm.c | 11 +-- .../bpf/prog_tests/bpf_iter_setsockopt.c | 13 +--- .../bpf/prog_tests/btf_skc_cls_ingress.c | 6 +- .../selftests/bpf/prog_tests/crypto_sanity.c | 3 +- .../selftests/bpf/prog_tests/decap_sanity.c | 6 +- .../selftests/bpf/prog_tests/fib_lookup.c | 8 +-- .../selftests/bpf/prog_tests/lwt_helpers.h | 26 ++----- .../selftests/bpf/prog_tests/lwt_redirect.c | 2 - .../selftests/bpf/prog_tests/lwt_reroute.c | 2 - .../testing/selftests/bpf/prog_tests/mptcp.c | 22 +----- .../bpf/prog_tests/ns_current_pid_tgid.c | 9 +-- .../selftests/bpf/prog_tests/setget_sockopt.c | 10 +-- .../selftests/bpf/prog_tests/sk_assign.c | 4 +- .../selftests/bpf/prog_tests/sock_destroy.c | 9 +-- .../selftests/bpf/prog_tests/sock_fields.c | 13 +--- .../bpf/prog_tests/sock_iter_batch.c | 7 +- .../bpf/prog_tests/tcp_custom_syncookie.c | 5 +- .../bpf/prog_tests/tcp_hdr_options.c | 13 +--- .../selftests/bpf/prog_tests/test_tunnel.c | 19 +++--- .../bpf/prog_tests/xdp_dev_bound_only.c | 3 +- .../bpf/prog_tests/xdp_do_redirect.c | 4 +- 24 files changed, 114 insertions(+), 163 deletions(-) -- 2.43.0

1 year, 7 months

1
10
0 0

[PATCH 6.6.y] kselftest: Add a ksft_perror() helper

by Edward Liaw

From: Mark Brown <broonie(a)kernel.org> [ Upstream commit 907f33028871fa7c9a3db1efd467b78ef82cce20 ] The standard library perror() function provides a convenient way to print an error message based on the current errno but this doesn't play nicely with KTAP output. Provide a helper which does an equivalent thing in a KTAP compatible format. nolibc doesn't have a strerror() and adding the table of strings required doesn't seem like a good fit for what it's trying to do so when we're using that only print the errno. Signed-off-by: Mark Brown <broonie(a)kernel.org> Reviewed-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Stable-dep-of: 071af0c9e582 ("selftests: timers: Convert posix_timers test to generate KTAP output") Signed-off-by: Edward Liaw <edliaw(a)google.com> --- tools/testing/selftests/kselftest.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index e8eecbc83a60..ad7b97e16f37 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -48,6 +48,7 @@ #include <stdlib.h> #include <unistd.h> #include <stdarg.h> +#include <string.h> #include <stdio.h> #include <sys/utsname.h> #endif @@ -156,6 +157,19 @@ static inline void ksft_print_msg(const char *msg, ...) va_end(args); } +static inline void ksft_perror(const char *msg) +{ +#ifndef NOLIBC + ksft_print_msg("%s: %s (%d)\n", msg, strerror(errno), errno); +#else + /* + * nolibc doesn't provide strerror() and it seems + * inappropriate to add one, just print the errno. + */ + ksft_print_msg("%s: %d)\n", msg, errno); +#endif +} + static inline void ksft_test_result_pass(const char *msg, ...) { int saved_errno = errno; -- 2.44.0.769.g3c40516874-goog

1 year, 7 months

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror