- Linux-kselftest-mirror - lists.linaro.org

[PATCH v2 1/2] test_firmware: prevent race conditions by a correct implementation of locking

by Mirsad Todorovac

[ Upstream commit 4acfe3dfde685a5a9eaec5555351918e2d7266a1 ] Dan Carpenter spotted a race condition in a couple of situations like these in the test_firmware driver: static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) { u8 val; int ret; ret = kstrtou8(buf, 10, &val); if (ret) return ret; mutex_lock(&test_fw_mutex); *(u8 *)cfg = val; mutex_unlock(&test_fw_mutex); /* Always return full write size even if we didn't consume all */ return size; } static ssize_t config_num_requests_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { int rc; mutex_lock(&test_fw_mutex); if (test_fw_config->reqs) { pr_err("Must call release_all_firmware prior to changing config\n"); rc = -EINVAL; mutex_unlock(&test_fw_mutex); goto out; } mutex_unlock(&test_fw_mutex); // NOTE: HERE is the race!!! Function can be preempted! // test_fw_config->reqs can change between the release of // the lock about and acquire of the lock in the // test_dev_config_update_u8() rc = test_dev_config_update_u8(buf, count, &test_fw_config->num_requests); out: return rc; } static ssize_t config_read_fw_idx_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { return test_dev_config_update_u8(buf, count, &test_fw_config->read_fw_idx); } The function test_dev_config_update_u8() is called from both the locked and the unlocked context, function config_num_requests_store() and config_read_fw_idx_store() which can both be called asynchronously as they are driver's methods, while test_dev_config_update_u8() and siblings change their argument pointed to by u8 *cfg or similar pointer. To avoid deadlock on test_fw_mutex, the lock is dropped before calling test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8() itself, but alas this creates a race condition. Having two locks wouldn't assure a race-proof mutual exclusion. This situation is best avoided by the introduction of a new, unlocked function __test_dev_config_update_u8() which can be called from the locked context and reducing test_dev_config_update_u8() to: static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) { int ret; mutex_lock(&test_fw_mutex); ret = __test_dev_config_update_u8(buf, size, cfg); mutex_unlock(&test_fw_mutex); return ret; } doing the locking and calling the unlocked primitive, which enables both locked and unlocked versions without duplication of code. Fixes: c92316bf8e948 ("test_firmware: add batched firmware tests") Cc: Luis R. Rodriguez <mcgrof(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Russ Weight <russell.h.weight(a)intel.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Tianfei Zhang <tianfei.zhang(a)intel.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Colin Ian King <colin.i.king(a)gmail.com> Cc: Randy Dunlap <rdunlap(a)infradead.org> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org # v5.4, 4.19 Suggested-by: Dan Carpenter <error27(a)gmail.com> Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg… Signed-off-by: Mirsad Todorovac <mirsad.todorovac(a)alu.unizg.hr> [ This is the patch to fix the racing condition in locking for the 5.4, ] [ 4.19 and 4.4 stable branches. Not all the fixes from the upstream ] [ commit apply, but those which do are verbatim equal to those in the ] [ upstream commit. ] --- v2: bundled locking and ENOSPC patches together. tested on 5.4 and 4.19 stable. lib/test_firmware.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/lib/test_firmware.c b/lib/test_firmware.c index 38553944e967..92d7195d5b5b 100644 --- a/lib/test_firmware.c +++ b/lib/test_firmware.c @@ -301,16 +301,26 @@ static ssize_t config_test_show_str(char *dst, return len; } -static int test_dev_config_update_bool(const char *buf, size_t size, - bool *cfg) +static inline int __test_dev_config_update_bool(const char *buf, size_t size, + bool *cfg) { int ret; - mutex_lock(&test_fw_mutex); if (strtobool(buf, cfg) < 0) ret = -EINVAL; else ret = size; + + return ret; +} + +static int test_dev_config_update_bool(const char *buf, size_t size, + bool *cfg) +{ + int ret; + + mutex_lock(&test_fw_mutex); + ret = __test_dev_config_update_bool(buf, size, cfg); mutex_unlock(&test_fw_mutex); return ret; @@ -340,7 +350,7 @@ static ssize_t test_dev_config_show_int(char *buf, int cfg) return snprintf(buf, PAGE_SIZE, "%d\n", val); } -static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) +static inline int __test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) { int ret; long new; @@ -352,14 +362,23 @@ static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) if (new > U8_MAX) return -EINVAL; - mutex_lock(&test_fw_mutex); *(u8 *)cfg = new; - mutex_unlock(&test_fw_mutex); /* Always return full write size even if we didn't consume all */ return size; } +static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) +{ + int ret; + + mutex_lock(&test_fw_mutex); + ret = __test_dev_config_update_u8(buf, size, cfg); + mutex_unlock(&test_fw_mutex); + + return ret; +} + static ssize_t test_dev_config_show_u8(char *buf, u8 cfg) { u8 val; @@ -392,10 +411,10 @@ static ssize_t config_num_requests_store(struct device *dev, mutex_unlock(&test_fw_mutex); goto out; } - mutex_unlock(&test_fw_mutex); - rc = test_dev_config_update_u8(buf, count, - &test_fw_config->num_requests); + rc = __test_dev_config_update_u8(buf, count, + &test_fw_config->num_requests); + mutex_unlock(&test_fw_mutex); out: return rc; -- 2.39.3

1 year, 11 months

1
0
0 0

[RFC PATCH 0/3] memfd: cleanups for vm.memfd_noexec

by Aleksa Sarai

It seems that the most critical issue with vm.memfd_noexec=2 (the fact that passing MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's tree[2], but there are still some outstanding issues that need to be addressed: * The dmesg warnings are pr_warn_once, which on most systems means that they will be used up by systemd or some other boot process and userspace developers will never see it. The original patch posted to the ML used pr_warn_ratelimited but the merged patch had it changed (with a comment about it being "per review"), but given that the current warnings are useless, pr_warn_ratelimited makes far more sense. * vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls because it will make it far to difficult to ever migrate. Instead it should imply MFD_EXEC. * The racheting mechanism for vm.memfd_noexec doesn't make sense as a security mechanism because a CAP_SYS_ADMIN capable user can create executable binaries in a hidden tmpfs very easily, not to mention the many other things they can do. * The memfd selftests would not exit with a non-zero error code when certain tests that ran in a forked process (specifically the ones related to MFD_EXEC and MFD_NOEXEC_SEAL) failed. (This patchset is based on top of Jeff Xu's patches[2] fixing the MFD_EXEC bug in vm.memfd_noexec=2.) [1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/ [2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/ Aleksa Sarai (3): memfd: cleanups for vm.memfd_noexec handling memfd: remove racheting feature from vm.memfd_noexec selftests: memfd: error out test process when child test fails include/linux/pid_namespace.h | 16 +++------ kernel/pid_sysctl.h | 7 ---- mm/memfd.c | 32 +++++++---------- tools/testing/selftests/memfd/memfd_test.c | 41 ++++++++++++++++++---- 4 files changed, 51 insertions(+), 45 deletions(-) -- 2.41.0

1 year, 11 months

3
17
0 0

[PATCH bpf-next v8 0/4] bpf: Force to MPTCP

by Geliang Tang

As is described in the "How to use MPTCP?" section in MPTCP wiki [1]: "Your app should create sockets with IPPROTO_MPTCP as the proto: ( socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); ). Legacy apps can be forced to create and use MPTCP sockets instead of TCP ones via the mptcpize command bundled with the mptcpd daemon." But the mptcpize (LD_PRELOAD technique) command has some limitations [2]: - it doesn't work if the application is not using libc (e.g. GoLang apps) - in some envs, it might not be easy to set env vars / change the way apps are launched, e.g. on Android - mptcpize needs to be launched with all apps that want MPTCP: we could have more control from BPF to enable MPTCP only for some apps or all the ones of a netns or a cgroup, etc. - it is not in BPF, we cannot talk about it at netdev conf. So this patchset attempts to use BPF to implement functions similer to mptcpize. The main idea is to add a hook in sys_socket() to change the protocol id from IPPROTO_TCP (or 0) to IPPROTO_MPTCP. [1] https://github.com/multipath-tcp/mptcp_net-next/wiki [2] https://github.com/multipath-tcp/mptcp_net-next/issues/79 v8: - drop the additional checks on the 'protocol' value after the 'update_socket_protocol()' call. v7: - add __weak and __diag_* for update_socket_protocol. v6: - add update_socket_protocol. v5: - add bpf_mptcpify helper. v4: - use lsm_cgroup/socket_create v3: - patch 8: char cmd[128]; -> char cmd[256]; v2: - Fix build selftests errors reported by CI Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/79 Geliang Tang (4): bpf: Add update_socket_protocol hook selftests/bpf: Use random netns name for mptcp selftests/bpf: Add two mptcp netns helpers selftests/bpf: Add mptcpify test net/mptcp/bpf.c | 17 +++ net/socket.c | 25 ++++ .../testing/selftests/bpf/prog_tests/mptcp.c | 125 ++++++++++++++++-- tools/testing/selftests/bpf/progs/mptcpify.c | 25 ++++ 4 files changed, 183 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/mptcpify.c -- 2.35.3

1 year, 11 months

3
8
0 0

[PATCH] kselftest/arm64: add RCpc load-acquire to the tested hwcaps

by Zeng Heng

Add RCpc load-acquire and various features check in the set of hwcaps. Test log as shown below: ~~~ # RCpc load-acquire present ok 47 cpuinfo_match_RCpc load-acquire ok 48 sigill_RCpc load-acquire # RCpc load-acquire2 present ok 49 cpuinfo_match_RCpc load-acquire2 ok 50 sigill_RCpc load-acquire2 ~~~ Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- tools/testing/selftests/arm64/abi/hwcap.c | 26 +++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tools/testing/selftests/arm64/abi/hwcap.c b/tools/testing/selftests/arm64/abi/hwcap.c index 93333a90bf3a..ccb3f6adb68f 100644 --- a/tools/testing/selftests/arm64/abi/hwcap.c +++ b/tools/testing/selftests/arm64/abi/hwcap.c @@ -194,6 +194,18 @@ static void svebf16_sigill(void) asm volatile(".inst 0x658aa000" : : : "z0"); } +static void lrcpc_sigill(void) +{ + /* LDAPR W0, [SP, #0] */ + asm volatile(".inst 0xb8bfc3e0" : : : ); +} + +static void ilrcpc_sigill(void) +{ + /* LDAPUR W0, [SP, #8] */ + asm volatile(".inst 0x994083e0" : : : ); +} + static const struct hwcap_data { const char *name; unsigned long at_hwcap; @@ -364,6 +376,20 @@ static const struct hwcap_data { .hwcap_bit = HWCAP2_SVE_EBF16, .cpuinfo = "sveebf16", }, + { + .name = "RCpc load-acquire", + .at_hwcap = AT_HWCAP, + .hwcap_bit = HWCAP_LRCPC, + .cpuinfo = "lrcpc", + .sigill_fn = lrcpc_sigill, + }, + { + .name = "RCpc load-acquire2", + .at_hwcap = AT_HWCAP, + .hwcap_bit = HWCAP_ILRCPC, + .cpuinfo = "ilrcpc", + .sigill_fn = ilrcpc_sigill, + }, }; static bool seen_sigill; -- 2.25.1

1 year, 11 months

2
2
0 0

[PATCH v5 0/8] tools/nolibc: add 32/64-bit powerpc support

by Zhangjin Wu

Hi, Willy Here is the v5, purely include the ppc parts, with two critical fixups for the latest gcc 13.1.0 toolchain, now, both run and run-user pass. Here is the run-user test report: // with local toolchains $ for arch in ppc ppc64 ppc64le; do make run-user XARCH=$arch | grep "status: "; done 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning // with latest toolchains $ for arch in ppc ppc64 ppc64le; do make run-user XARCH=$arch CC=/path/to/gcc-13.1.0-nolibc/powerpc64-linux/bin/powerpc64-linux-gcc | grep status; file nolibc-test; done 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning nolibc-test: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), statically linked, stripped 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning nolibc-test: ELF 64-bit MSB executable, 64-bit PowerPC or cisco 7500, version 1 (SYSV), statically linked, stripped 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning nolibc-test: ELF 64-bit LSB executable, 64-bit PowerPC or cisco 7500, version 1 (SYSV), statically linked, stripped Since the missing serial console enabling patch [1] for ppc32 has already gotten a Reviewed-by line from the ppc maintainer, now, the ppc defconfig aligns with the others', and it is able to simply move the nolibc-test-config related stuff to the next tinyconfig series. Based on v4 [2], beside removing several nolibc-test-config related patches, two bugs with the latest gcc 13.1.0 have been fixed. Changes from v4 --> v5: * tools/nolibc: add support for powerpc64 selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add test support for ppc64 selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc Almost the same as v4. * tools/nolibc: add support for powerpc For 32-bit PowerPC, with newer gcc compilers (e.g. gcc 13.1.0), "omit-frame-pointer" fails with __attribute__((no_stack_protector)) but works with __attribute__((__optimize__("-fno-stack-protector"))) Using the later for ppc32 to workaround the issue. * selftests/nolibc: add test support for ppc Add default CFLAGS for ppc to allow build with the latest powerpc64-linux-gcc toolchain from https://mirrors.edge.kernel.org/pub/tools/crosstool/ * selftests/nolibc: add test support for ppc64le Align with kernel, prefer elfv2 ABI to elfv1 ABI when the toolchain support, otherwise, ABI mismatched binary will not run. Best regards, Zhangjin Wu --- [1]: https://lore.kernel.org/lkml/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.16909… [2]: https://lore.kernel.org/lkml/cover.1690916314.git.falcon@tinylab.org/ Zhangjin Wu (8): tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add test support for ppc selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc64 selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc tools/include/nolibc/arch-powerpc.h | 213 ++++++++++++++++++++++++ tools/include/nolibc/arch.h | 2 + tools/testing/selftests/nolibc/Makefile | 74 ++++++-- 3 files changed, 277 insertions(+), 12 deletions(-) create mode 100644 tools/include/nolibc/arch-powerpc.h -- 2.25.1

1 year, 11 months

1
8
0 0

[PATCH v4 00/12] tools/nolibc: add 32/64-bit powerpc support

by Zhangjin Wu

Hi, Willy, Hi Thomas v4 here is mainly with a new nolibc-test-config target from your suggestions and with the reordering of some patches to make nolibc-test-config be fast forward. run-user tests for all of the powerpc variants: $ for arch in ppc ppc64 ppc64le; do make run-user XARCH=$arch | grep status; done 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning 165 test(s): 157 passed, 8 skipped, 0 failed => status: warning and defconfig + run for ppc: $ make nolibc-test-config XARCH=ppc $ make run XARCH=ppc 165 test(s): 159 passed, 6 skipped, 0 failed => status: warning * tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 No change. * selftests/nolibc: fix up O= option support selftests/nolibc: add macros to reduce duplicated changes From tinyconfig-part1 patchset, required by our nolibc-test-config target Let nolibc-test-config be able to use objtree and the kernel related macros directly. * selftests/nolibc: add XARCH and ARCH mapping support Moved before nolibc-test-config, for the NOLIBC_TEST_CONFIG macro used by nolibc-test-config target Willy talked about this twice, let nolibc-test-config be able to use nolibc-test-$(XARCH).config listed in NOLIBC_TEST_CONFIG directly. * selftests/nolibc: add nolibc-test-config target selftests/nolibc: add help for nolibc-test-config target A new generic nolibc-test-config target is added, allows to enable additional options for a top-level config target. defconfig is reserved as an alias of nolibc-test-config. As suggested by Thomas and Willy. * selftests/nolibc: add test support for ppc selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc64 Renamed from $(XARCH).config to nolibc-test-$(XARCH).config As suggested by Willy. * selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc Moved here as suggested by Willy. Best regards, Zhangjin --- [1]: https://lore.kernel.org/lkml/cover.1690468707.git.falcon@tinylab.org/ Zhangjin Wu (12): tools/nolibc: add support for powerpc tools/nolibc: add support for powerpc64 selftests/nolibc: fix up O= option support selftests/nolibc: add macros to reduce duplicated changes selftests/nolibc: add XARCH and ARCH mapping support selftests/nolibc: add nolibc-test-config target selftests/nolibc: add help for nolibc-test-config target selftests/nolibc: add test support for ppc selftests/nolibc: add test support for ppc64le selftests/nolibc: add test support for ppc64 selftests/nolibc: allow customize CROSS_COMPILE by architecture selftests/nolibc: customize CROSS_COMPILE for 32/64-bit powerpc tools/include/nolibc/arch-powerpc.h | 202 ++++++++++++++++++ tools/include/nolibc/arch.h | 2 + tools/testing/selftests/nolibc/Makefile | 157 ++++++++++---- .../nolibc/configs/nolibc-test-ppc.config | 3 + 4 files changed, 327 insertions(+), 37 deletions(-) create mode 100644 tools/include/nolibc/arch-powerpc.h create mode 100644 tools/testing/selftests/nolibc/configs/nolibc-test-ppc.config -- 2.25.1

1 year, 11 months

3
21
0 0

[RFC bpf-next v7 0/6] bpf: Force to MPTCP

by Geliang Tang

As is described in the "How to use MPTCP?" section in MPTCP wiki [1]: "Your app should create sockets with IPPROTO_MPTCP as the proto: ( socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); ). Legacy apps can be forced to create and use MPTCP sockets instead of TCP ones via the mptcpize command bundled with the mptcpd daemon." But the mptcpize (LD_PRELOAD technique) command has some limitations [2]: - it doesn't work if the application is not using libc (e.g. GoLang apps) - in some envs, it might not be easy to set env vars / change the way apps are launched, e.g. on Android - mptcpize needs to be launched with all apps that want MPTCP: we could have more control from BPF to enable MPTCP only for some apps or all the ones of a netns or a cgroup, etc. - it is not in BPF, we cannot talk about it at netdev conf. So this patchset attempts to use BPF to implement functions similer to mptcpize. The main idea is to add a hook in sys_socket() to change the protocol id from IPPROTO_TCP (or 0) to IPPROTO_MPTCP. [1] https://github.com/multipath-tcp/mptcp_net-next/wiki [2] https://github.com/multipath-tcp/mptcp_net-next/issues/79 v7: - add __weak and __diag_* for update_socket_protocol. v6: - add update_socket_protocol. v5: - add bpf_mptcpify helper. v4: - use lsm_cgroup/socket_create v3: - patch 8: char cmd[128]; -> char cmd[256]; v2: - Fix build selftests errors reported by CI Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/79 Geliang Tang (6): net: socket: add update_socket_protocol hook bpf: Register mptcp modret set selftests/bpf: Add mptcpify program selftests/bpf: use random netns name for mptcp selftests/bpf: add two mptcp netns helpers selftests/bpf: Add mptcpify selftest net/mptcp/bpf.c | 17 +++ net/socket.c | 26 ++++ .../testing/selftests/bpf/prog_tests/mptcp.c | 125 ++++++++++++++++-- tools/testing/selftests/bpf/progs/mptcpify.c | 25 ++++ 4 files changed, 184 insertions(+), 9 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/mptcpify.c -- 2.35.3

1 year, 11 months

4
11
0 0

[PATCH 0/4] Use TAP in some more x86 KVM selftests

by Thomas Huth

Here's a follow-up from my RFC series last year: https://lore.kernel.org/lkml/20221004093131.40392-1-thuth@redhat.com/T/ Basic idea of this series is now to use the kselftest_harness.h framework to get TAP output in the tests, so that it is easier for the user to see what is going on, and e.g. to be able to detect whether a certain test is part of the test binary or not (which is useful when tests get extended in the course of time). Thomas Huth (4): KVM: selftests: Rename the ASSERT_EQ macro KVM: selftests: x86: Use TAP interface in the sync_regs test KVM: selftests: x86: Use TAP interface in the fix_hypercall test KVM: selftests: x86: Use TAP interface in the userspace_msr_exit test .../selftests/kvm/aarch64/aarch32_id_regs.c | 8 +- .../selftests/kvm/aarch64/page_fault_test.c | 10 +- .../testing/selftests/kvm/include/test_util.h | 4 +- tools/testing/selftests/kvm/lib/kvm_util.c | 2 +- .../selftests/kvm/max_guest_memory_test.c | 2 +- tools/testing/selftests/kvm/s390x/cmma_test.c | 62 +++++----- tools/testing/selftests/kvm/s390x/memop.c | 6 +- tools/testing/selftests/kvm/s390x/tprot.c | 4 +- .../x86_64/dirty_log_page_splitting_test.c | 18 +-- .../x86_64/exit_on_emulation_failure_test.c | 2 +- .../selftests/kvm/x86_64/fix_hypercall_test.c | 16 ++- .../kvm/x86_64/nested_exceptions_test.c | 12 +- .../kvm/x86_64/recalc_apic_map_test.c | 6 +- .../selftests/kvm/x86_64/sync_regs_test.c | 113 +++++++++++++++--- .../selftests/kvm/x86_64/tsc_msrs_test.c | 32 ++--- .../kvm/x86_64/userspace_msr_exit_test.c | 19 +-- .../vmx_exception_with_invalid_guest_state.c | 2 +- .../selftests/kvm/x86_64/vmx_pmu_caps_test.c | 3 +- .../selftests/kvm/x86_64/xapic_state_test.c | 8 +- .../selftests/kvm/x86_64/xen_vmcall_test.c | 20 ++-- 20 files changed, 218 insertions(+), 131 deletions(-) -- 2.39.3

1 year, 11 months

3
11
0 0

[PATCH v2 00/10] tools/nolibc: enable compiler warnings

by Thomas Weißschuh

To help the developers to avoid mistakes and keep the code smaller let's enable compiler warnings. I stuck with __attribute__((unused)) over __maybe_unused in nolibc-test.c for consistency with nolibc proper. If we want to add a define it needs to be added twice once for nolibc proper and once for nolibc-test otherwise libc-test wouldn't build anymore. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Changes in v2: - Don't drop unused test helpers, mark them as __attribute__((unused)) - Make some function in nolibc-test static - Also handle -W and -Wextra - Link to v1: https://lore.kernel.org/r/20230731-nolibc-warnings-v1-0-74973d2a52d7@weisss… --- Thomas Weißschuh (10): tools/nolibc: drop unused variables tools/nolibc: sys: avoid implicit sign cast tools/nolibc: stdint: use int for size_t on 32bit selftests/nolibc: drop unused variables selftests/nolibc: mark test helpers as potentially unused selftests/nolibc: make functions static if possible selftests/nolibc: avoid unused arguments warnings selftests/nolibc: avoid sign-compare warnings selftests/nolibc: test return value of read() in test_vfprintf selftests/nolibc: enable compiler warnings tools/include/nolibc/stdint.h | 4 + tools/include/nolibc/sys.h | 3 +- tools/testing/selftests/nolibc/Makefile | 2 +- tools/testing/selftests/nolibc/nolibc-test.c | 108 +++++++++++++++++---------- 4 files changed, 74 insertions(+), 43 deletions(-) --- base-commit: dfef4fc45d5713eb23d87f0863aff9c33bd4bfaf change-id: 20230731-nolibc-warnings-c6e47284ac03 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

1 year, 11 months

4
27
0 0

[PATCH 00/13] Extedn DAMOS filters for address ranges and DAMON monitoring targets

by SeongJae Park

Changes from RFC[1] - Rebase on latest mm-unstable - Add base-commit ---- There are use cases that need to apply DAMOS schemes to specific address ranges or DAMON monitoring targets. NUMA nodes in the physical address space, special memory objects in the virtual address space, and monitoring target specific efficient monitoring results snapshot retrieval could be examples of such use cases. This patchset extends DAMOS filters feature for such cases, by implementing two more filter types, namely address ranges and DAMON monitoring types. Patches sequence ---------------- The first seven patches are for the address ranges based DAMOS filter. The first patch implements the filter feature and expose it via DAMON kernel API. The second patch further expose the feature to users via DAMON sysfs interface. The third and fourth patches implement unit tests and selftests for the feature. Three patches (fifth to seventh) updating the documents follow. The following six patches are for the DAMON monitoring target based DAMOS filter. The eighth patch implements the feature in the core layer and expose it via DAMON's kernel API. The ninth patch further expose it to users via DAMON sysfs interface. Tenth patch add a selftest, and two patches (eleventh and twelfth) update documents. [1] https://lore.kernel.org/damon/20230728203444.70703-1-sj@kernel.org/ SeongJae Park (13): mm/damon/core: introduce address range type damos filter mm/damon/sysfs-schemes: support address range type DAMOS filter mm/damon/core-test: add a unit test for __damos_filter_out() selftests/damon/sysfs: test address range damos filter Docs/mm/damon/design: update for address range filters Docs/ABI/damon: update for address range DAMOS filter Docs/admin-guide/mm/damon/usage: update for address range type DAMOS filter mm/damon/core: implement target type damos filter mm/damon/sysfs-schemes: support target damos filter selftests/damon/sysfs: test damon_target filter Docs/mm/damon/design: update for DAMON monitoring target type DAMOS filter Docs/ABI/damon: update for DAMON monitoring target type DAMOS filter Docs/admin-guide/mm/damon/usage: update for DAMON monitoring target type DAMOS filter .../ABI/testing/sysfs-kernel-mm-damon | 27 +++++- Documentation/admin-guide/mm/damon/usage.rst | 34 +++++--- Documentation/mm/damon/design.rst | 24 ++++-- include/linux/damon.h | 28 +++++-- mm/damon/core-test.h | 61 ++++++++++++++ mm/damon/core.c | 62 ++++++++++++++ mm/damon/sysfs-schemes.c | 83 +++++++++++++++++++ tools/testing/selftests/damon/sysfs.sh | 5 ++ 8 files changed, 299 insertions(+), 25 deletions(-) base-commit: 32f9db36a0031f99629b5910d795b3f13f284472 -- 2.25.1

1 year, 11 months

1
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror