This is similar to TCP MD5 in functionality but it's sufficiently
different that wire formats are incompatible. Compared to TCP-MD5 more
algorithms are supported and multiple keys can be used on the same
connection but there is still no negotiation mechanism.
Expected use-case is protecting long-duration BGP/LDP connections
between routers using pre-shared keys. The goal of this series is to
allow routers using the linux TCP stack to interoperate with vendors
such as Cisco and Juniper.
Both algorithms described in RFC5926 are implemented but the code is not
very easily extensible beyond that. In particular there are several code
paths making stack allocations based on RFC5926 maximum, those would
have to be increased. Support for arbitrary algorithms was requested
in reply to previous posts but I believe there is no real use case for
that.
The current implementation is somewhat loose regarding configuration:
* Overlaping MKTs can be configured despite what RFC5925 says
* Current key can be deleted
* If multiple keys are valid for a destination the kernel picks one
in an unpredictable manner (this can be overridden).
These conditions could be tightened but it is not clear the kernel
should prevent misconfiguration from userspace.
This version implements prefixlen and incorporates comments from v2 as
well as some unrelated fixes. Here are some known flaws and limitations:
* Crypto API is used with buffers on the stack and inside struct sock,
this might not work on all arches. I'm currently only testing x64 VMs
* Interaction with TCP-MD5 not tested in all corners.
* Interaction with FASTOPEN not tested and unlikely to work because
sequence number assumptions for syn/ack.
* Not clear if crypto_ahash_setkey might sleep. If some implementation
do that then maybe they could be excluded through alloc flags.
* Traffic key is not cached (reducing performance)
* There is no useful way to list keys, making userspace debug difficult.
Some testing support is included in nettest and fcnal-test.sh, similar
to the current level of tcp-md5 testing.
A more elaborate test suite using pytest and scapy is available out of
tree: https://github.com/cdleonard/tcp-authopt-test That test suite is
much larger that the kernel code and did not receive many comments so
I will attempt to push it separately (if at all).
Changes for frr (old): https://github.com/FRRouting/frr/pull/9442
That PR was made early for ABI feedback, it has many issues.
Changes for yabgp (old): https://github.com/cdleonard/yabgp/commits/tcp_authopt
This can be use for easy interoperability testing with cisco/juniper/etc.
Changes since PATCH v2:
* Protect tcp_authopt_alg_get/put_tfm with local_bh_disable instead of
preempt_disable. This caused signature corruption when send path executing
with BH enabled was interrupted by recv.
* Fix accepted keyids not configured locally as "unexpected". If any key
is configured that matches the peer then traffic MUST be signed.
* Fix issues related to sne rollover during handshake itself. (Francesco)
* Implement and test prefixlen (David)
* Replace shash with ahash and reuse some of the MD5 code (Dmitry)
* Parse md5+ao options only once in the same function (Dmitry)
* Pass tcp_authopt_info into inbound check path, this avoids second rcu
dereference for same packet.
* Pass tcp_request_socket into inbound check path instead of just listen
socket. This is required for SNE rollover during handshake and clearifies
ISN handling.
* Do not allow disabling via sysctl after enabling once, this is difficult
to support well (David)
* Verbose check for sysctl_tcp_authopt (Dmitry)
* Use netif_index_is_l3_master (David)
* Cleanup ipvx_addr_match (David)
* Add a #define tcp_authopt_needed to wrap static key usage because it looks
nicer.
* Replace rcu_read_lock with rcu_dereference_protected in SNE updates (Eric)
Link: https://lore.kernel.org/netdev/cover.1635784253.git.cdleonard@gmail.com/
Changes since PATCH v1:
* Implement Sequence Number Extension
* Implement l3index for vrf: TCP_AUTHOPT_KEY_IFINDEX as equivalent of
TCP_MD5SIG_FLAG_IFINDEX
* Expand TCP-AO tests in fcnal-test.sh to near-parity with md5.
* Show addr/port on failure similar to md5
* Remove tox dependency from test suite (create venv directly)
* Switch default pytest output format to TAP (kselftest standard)
* Fix _copy_from_sockptr_tolerant stack corruption on short sockopts.
This was covered in test but error was invisible without STACKPROTECTOR=y
* Fix sysctl_tcp_authopt check in tcp_get_authopt_val before memset. This
was harmless because error code is checked in getsockopt anyway.
* Fix dropping md5 packets on all sockets with AO enabled
* Fix checking (key->recv_id & TCP_AUTHOPT_KEY_ADDR_BIND) instead of
key->flags in tcp_authopt_key_match_exact
* Fix PATCH 1/19 not compiling due to missing "int err" declaration
* Add ratelimited message for AO and MD5 both present
* Export all symbols required by CONFIG_IPV6=m (again)
* Fix compilation with CONFIG_TCP_AUTHOPT=y CONFIG_TCP_MD5SIG=n
* Fix checkpatch issues
* Pass -rrequirements.txt to tox to avoid dependency variation.
Link: https://lore.kernel.org/netdev/cover.1632240523.git.cdleonard@gmail.com/
Changes since RFCv3:
* Implement TCP_AUTHOPT handling for timewait and reset replies. Write
tests to execute these paths by injecting packets with scapy
* Handle combining md5 and authopt: if both are configured use authopt.
* Fix locking issues around send_key, introduced in on of the later patches.
* Handle IPv4-mapped-IPv6 addresses: it used to be that an ipv4 SYN sent
to an ipv6 socket with TCP-AO triggered WARN
* Implement un-namespaced sysctl disabled this feature by default
* Allocate new key before removing any old one in setsockopt (Dmitry)
* Remove tcp_authopt_key_info.local_id because it's no longer used (Dmitry)
* Propagate errors from TCP_AUTHOPT getsockopt (Dmitry)
* Fix no-longer-correct TCP_AUTHOPT_KEY_DEL docs (Dmitry)
* Simplify crypto allocation (Eric)
* Use kzmalloc instead of __GFP_ZERO (Eric)
* Add static_key_false tcp_authopt_needed (Eric)
* Clear authopt_info copied from oldsk in __tcp_authopt_openreq (Eric)
* Replace memcmp in ipv4 and ipv6 addr comparisons (Eric)
* Export symbols for CONFIG_IPV6=m (kernel test robot)
* Mark more functions static (kernel test robot)
* Fix build with CONFIG_PROVE_RCU_LIST=y (kernel test robot)
Link: https://lore.kernel.org/netdev/cover.1629840814.git.cdleonard@gmail.com/
Changes since RFCv2:
* Removed local_id from ABI and match on send_id/recv_id/addr
* Add all relevant out-of-tree tests to tools/testing/selftests
* Return an error instead of ignoring unknown flags, hopefully this makes
it easier to extend.
* Check sk_family before __tcp_authopt_info_get_or_create in tcp_set_authopt_key
* Use sock_owned_by_me instead of WARN_ON(!lockdep_sock_is_held(sk))
* Fix some intermediate build failures reported by kbuild robot
* Improve documentation
Link: https://lore.kernel.org/netdev/cover.1628544649.git.cdleonard@gmail.com/
Changes since RFC:
* Split into per-topic commits for ease of review. The intermediate
commits compile with a few "unused function" warnings and don't do
anything useful by themselves.
* Add ABI documention including kernel-doc on uapi
* Fix lockdep warnings from crypto by creating pools with one shash for
each cpu
* Accept short options to setsockopt by padding with zeros; this
approach allows increasing the size of the structs in the future.
* Support for aes-128-cmac-96
* Support for binding addresses to keys in a way similar to old tcp_md5
* Add support for retrieving received keyid/rnextkeyid and controling
the keyid/rnextkeyid being sent.
Link: https://lore.kernel.org/netdev/01383a8751e97ef826ef2adf93bfde3a08195a43.162…
```
Leonard Crestez (18):
tcp: authopt: Initial support and key management
docs: Add user documentation for tcp_authopt
tcp: authopt: Add crypto initialization
tcp: md5: Refactor tcp_sig_hash_skb_data for AO
tcp: authopt: Compute packet signatures
tcp: authopt: Hook into tcp core
tcp: authopt: Disable via sysctl by default
tcp: authopt: Implement Sequence Number Extension
tcp: ipv6: Add AO signing for tcp_v6_send_response
tcp: authopt: Add support for signing skb-less replies
tcp: ipv4: Add AO signing for skb-less replies
tcp: authopt: Add key selection controls
tcp: authopt: Add initial l3index support
tcp: authopt: Add NOSEND/NORECV flags
tcp: authopt: Add prefixlen support
selftests: nettest: Rename md5_prefix to key_addr_prefix
selftests: nettest: Initial tcp_authopt support
selftests: net/fcnal: Initial tcp_authopt support
Documentation/networking/index.rst | 1 +
Documentation/networking/ip-sysctl.rst | 6 +
Documentation/networking/tcp_authopt.rst | 69 +
include/linux/tcp.h | 9 +
include/net/tcp.h | 27 +-
include/net/tcp_authopt.h | 316 ++++
include/uapi/linux/snmp.h | 1 +
include/uapi/linux/tcp.h | 137 ++
net/ipv4/Kconfig | 14 +
net/ipv4/Makefile | 1 +
net/ipv4/proc.c | 1 +
net/ipv4/sysctl_net_ipv4.c | 39 +
net/ipv4/tcp.c | 68 +-
net/ipv4/tcp_authopt.c | 1671 +++++++++++++++++++++
net/ipv4/tcp_input.c | 41 +-
net/ipv4/tcp_ipv4.c | 136 +-
net/ipv4/tcp_minisocks.c | 12 +
net/ipv4/tcp_output.c | 86 +-
net/ipv6/tcp_ipv6.c | 108 +-
tools/testing/selftests/net/fcnal-test.sh | 298 ++++
tools/testing/selftests/net/nettest.c | 123 +-
21 files changed, 3085 insertions(+), 79 deletions(-)
create mode 100644 Documentation/networking/tcp_authopt.rst
create mode 100644 include/net/tcp_authopt.h
create mode 100644 net/ipv4/tcp_authopt.c
base-commit: 1fe5b01262844be03de98afdd56d1d393df04d7e
--
2.25.1
The XSAVE feature set supports the saving and restoring of xstate components,
which is used for process context switching. The state components include
x87 state for FPU execution environment, SSE state, AVX state and so on.
In order to ensure that XSAVE works correctly, add XSAVE basic test for XSAVE
architecture functionality.
This patch set tests and verifies the basic functions of XSAVE in user
space; it tests "FPU, AVX2, AVX512 opmask and PKRU" xstates(will call
them "above xstates" instead) with following cases:
1. In nested signal processing, the signal handling will use each signal's own
xstates, and the xstates of the signal handling under test should not be
changed after another nested signal handling is completed; and the above
mentioned xstates in the process should not change after the nested signal
handling is complete.
2. Above xstates in child process should same as parent xstates; and after
process switch, the above xstates contents in child process should not be
changed.
This series introduces only the most basic XSAVE tests. In the future, the
intention is to continue expanding the scope of these selftests to include
more xstates and kernel XSAVE-related functionality tests.
========
- Change from v4 to v5:
- Moved code files into tools/testing/selftests/x86.
- Delete xsave instruction test, becaue it's not related to kernel.
- Improved case description.
- Added AVX512 opmask change and related XSAVE content verification.
- Added PKRU part xstate test into instruction and signal handling test.
- Added XSAVE process swich test for FPU, AVX2, AVX512 opmask and PKRU part.
- Change from v3 to v4:
- Improve the comment in patch 1.
- Change from v2 to v3:
- Improve the description of patch 2 git log.
- Change from v1 to v2:
- Improve the cover-letter. Thanks Dave Hansen's suggestion.
Pengfei Xu (2):
selftests/x86: add xsave test during and after signal handling
selftests/x86: add xsave test after process switch
tools/testing/selftests/x86/Makefile | 4 +-
tools/testing/selftests/x86/xsave_common.h | 426 ++++++++++++++++++
tools/testing/selftests/x86/xsave_fork_test.c | 127 ++++++
.../selftests/x86/xsave_signal_handle.c | 192 ++++++++
4 files changed, 747 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/selftests/x86/xsave_common.h
create mode 100644 tools/testing/selftests/x86/xsave_fork_test.c
create mode 100644 tools/testing/selftests/x86/xsave_signal_handle.c
--
2.27.0
If any sub-test in this icmp_redirect.sh is failing but not expected
to fail. The script will complain:
./icmp_redirect.sh: line 72: [: 1: unary operator expected
This is because when the sub-test is not expected to fail, we won't
pass any value for the xfail local variable in log_test() and thus
it's empty. Fix this by passing 0 as the 4th variable to log_test()
for non-xfail cases.
v2: added fixes tag
Fixes: 0a36a75c6818 ("selftests: icmp_redirect: support expected failures")
Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com>
---
tools/testing/selftests/net/icmp_redirect.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index ecbf57f..7b9d6e3 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -311,7 +311,7 @@ check_exception()
ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
grep -E -v 'mtu|redirected' | grep -q "cache"
fi
- log_test $? 0 "IPv4: ${desc}"
+ log_test $? 0 "IPv4: ${desc}" 0
# No PMTU info for test "redirect" and "mtu exception plus redirect"
if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
--
2.7.4
This series adds a basic selftest for the mixer interface, as discussed
in the cover letter for the main patch there's plenty of additional
coverage that could be added but this is a good starting point.
v4:
- More stylistic updates suggested by Shuah.
- Fix build with older alsa-lib.
v3:
- Pull in incremental updates adding a fixed library configuration from
Jaroslav and support for volatile controls from Takashi Sakamoto.
- Stylistic updates suggested by Shuah.
v2:
- Use pkg-config to get CFLAGS and LDLIBS for alsa-lib.
Jaroslav Kysela (1):
kselftest: alsa: Use private alsa-lib configuration in mixer test
Mark Brown (1):
kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest
Takashi Sakamoto (1):
kselftest: alsa: optimization for SNDRV_CTL_ELEM_ACCESS_VOLATILE
MAINTAINERS | 8 +
tools/testing/selftests/Makefile | 3 +-
tools/testing/selftests/alsa/.gitignore | 1 +
tools/testing/selftests/alsa/Makefile | 9 +
tools/testing/selftests/alsa/mixer-test.c | 665 ++++++++++++++++++++++
5 files changed, 685 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/alsa/.gitignore
create mode 100644 tools/testing/selftests/alsa/Makefile
create mode 100644 tools/testing/selftests/alsa/mixer-test.c
base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
--
2.30.2
The --jobs parameter for kunit_tool currently defaults to 8 CPUs,
regardless of the number available. For systems with significantly more
(or less), this is not as efficient. Instead, default --jobs to the
number of CPUs present in the system: while there are as many
superstitions as to exactly what the ideal jobs:CPU ratio is, this seems
sufficiently sensible to me.
Signed-off-by: David Gow <davidgow(a)google.com>
---
tools/testing/kunit/kunit.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index 68e6f461c758..2cb6c7db5683 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -310,7 +310,7 @@ def add_build_opts(parser) -> None:
parser.add_argument('--jobs',
help='As in the make command, "Specifies the number of '
'jobs (commands) to run simultaneously."',
- type=int, default=8, metavar='jobs')
+ type=int, default=os.cpu_count(), metavar='jobs')
def add_exec_opts(parser) -> None:
parser.add_argument('--timeout',
--
2.34.1.173.g76aa8bc2d0-goog
The KUnit documentation was not very organized. There was little
information related to KUnit architecture and the importance of unit
testing.
Add some new pages, expand and reorganize the existing documentation.
Reword pages to make information and style more consistent.
Changes since v2:
https://lore.kernel.org/linux-kselftest/20211207054019.1455054-1-sharinder@…
--Reworded sentences as per comments
--Expanded the explaination in usage.rst for accessing the current test example
--Standardized on US english in style.rst
Changes since v1:
https://lore.kernel.org/linux-kselftest/20211203042437.740255-1-sharinder@g…
--Fixed spelling mistakes
--Restored paragraph about kunit_tool introduction
--Added note about CONFIG_KUNIT_ALL_TESTS (Thanks Tim Bird for review
comments)
-- Miscellaneous changes
Harinder Singh (7):
Documentation: KUnit: Rewrite main page
Documentation: KUnit: Rewrite getting started
Documentation: KUnit: Added KUnit Architecture
Documentation: kunit: Reorganize documentation related to running
tests
Documentation: KUnit: Rework writing page to focus on writing tests
Documentation: KUnit: Restyle Test Style and Nomenclature page
Documentation: KUnit: Restyled Frequently Asked Questions
.../dev-tools/kunit/architecture.rst | 206 +++++++
Documentation/dev-tools/kunit/faq.rst | 73 ++-
Documentation/dev-tools/kunit/index.rst | 172 +++---
.../kunit/kunit_suitememorydiagram.png | Bin 0 -> 24174 bytes
Documentation/dev-tools/kunit/run_manual.rst | 57 ++
Documentation/dev-tools/kunit/run_wrapper.rst | 247 ++++++++
Documentation/dev-tools/kunit/start.rst | 198 +++---
Documentation/dev-tools/kunit/style.rst | 105 ++--
Documentation/dev-tools/kunit/usage.rst | 578 ++++++++----------
9 files changed, 1049 insertions(+), 587 deletions(-)
create mode 100644 Documentation/dev-tools/kunit/architecture.rst
create mode 100644 Documentation/dev-tools/kunit/kunit_suitememorydiagram.png
create mode 100644 Documentation/dev-tools/kunit/run_manual.rst
create mode 100644 Documentation/dev-tools/kunit/run_wrapper.rst
base-commit: 4c388a8e740d3235a194f330c8ef327deef710f6
--
2.34.1.173.g76aa8bc2d0-goog
This series provides initial support for the ARMv9 Scalable Matrix
Extension (SME). SME takes the approach used for vectors in SVE and
extends this to provide architectural support for matrix operations. A
more detailed overview can be found in [1].
For the kernel SME can be thought of as a series of features which are
intended to be used together by applications but operate mostly
orthogonally:
- The ZA matrix register.
- Streaming mode, in which ZA can be accessed and a subset of SVE
features are available.
- A second vector length, used for streaming mode SVE and ZA and
controlled using a similar interface to that for SVE.
- TPIDR2, a new userspace controllable system register intended for use
by the C library for storing context related to the ZA ABI.
A substantial part of the series is dedicated to refactoring the
existing SVE support so that we don't need to duplicate code for
handling vector lengths and the SVE registers, this involves creating an
array of vector types and making the users take the vector type as a
parameter. I'm not 100% happy with this but wasn't able to come up with
anything better, duplicating code definitely felt like a bad idea so
this felt like the least bad thing. If this approach makes sense to
people it might make sense to split this off into a separate series
and/or merge it while the rest is pending review to try to make things a
little more digestable, the series is very large so it'd probably make
things easier to digest if some of the preparatory refactoring could be
merged before the rest is ready.
One feature of the architecture of particular note is that switching
to and from streaming mode may change the size of and invalidate the
contents of the SVE registers, and when in streaming mode the FFR is not
accessible. This complicates aspects of the ABI like signal handling
and ptrace.
This initial implementation is mainly intended to get the ABI in place,
there are several areas which will be worked on going forwards - some of
these will be blockers, others could be handled in followup serieses:
- KVM is not currently supported and we depend on !KVM, this is
obviously not good - in hopefully the next version I will add support
for coexisting with KVM and then in a subsequent series implement
support for use of SME by KVM guests.
- It is likely some build configurations have issues, I've not fully
checked this yet. In general testing is still ongoing, I anticipate
finding and fixing some issues in the implementation.
- No support is currently provided for scheduler control of SME or SME
applications, given the size of the SME register state the context
switch overhead may be noticable so this may be needed especially for
real time applications. Similar concerns already exist for larger
SVE vector lengths but are amplified for SME, particularly as the
vector length increases.
- There has been no work on optimising the performance of anything the
kernel does.
It is not expected that any systems will be encountered that support SME
but not SVE, SME is an ARMv9 feature and SVE is mandatory for ARMv9.
The code attempts to handle any such systems that are encountered but
this hasn't been tested extensively.
Due to dependencies on changes already upstreamed this series is based
on a merge of for-next/kselftest and for-next/sve in the arm64 tree.
v6:
- Rebase onto v5.16-rc1.
- Return to disabling TIF_SVE on kernel entry even if we have SME
state, this avoids the need for KVM to handle the case where TIF_SVE
is set on guest entry.
- Add syscall-abi.h to SME updates to syscall-abi, mistakenly omitted
from commit.
v5:
- Rebase onto currently merged SVE and kselftest patches.
- Add support for the FA64 option, introduced in the recently published
EAC1 update to the specification.
- Pull in test program for the syscall ABI previously sent separately
with some revisions and add coverage for the SME ABI.
- Fix checking for options with 1 bit fields in ID_AA64SMFR0_EL1.
- Minor fixes and clarifications to the ABI documentation.
v4:
- Rebase onto merged patches.
- Remove an uneeded NULL check in vec_proc_do_default_vl().
- Include patch to factor out utility routines in kselftests written in
assembler.
- Specify -ffreestanding when building TPIDR2 test.
v3:
- Skip FFR rather than predicate registers in sve_flush_live().
- Don't assume a bool is all zeros in sve_flush_live() as per AAPCS.
- Don't redundantly specify a zero index when clearing FFR.
v2:
- Fix several issues with !SME and !SVE configurations.
- Preserve TPIDR2 when creating a new thread/process unless
CLONE_SETTLS is set.
- Report traps due to using features in an invalid mode as SIGILL.
- Spell out streaming mode behaviour in SVE ABI documentation more
directly.
- Document TPIDR2 in the ABI document.
- Use SMSTART and SMSTOP rather than read/modify/write sequences.
- Rework logic for exiting streaming mode on syscall.
- Don't needlessly initialise SVCR on access trap.
- Always restore SME VL for userspace if SME traps are disabled.
- Only yield to encourage preemption every 128 iterations in za-test,
otherwise do a getpid(), and validate SVCR after syscall.
- Leave streaming mode disabled except when reading the vector length
in za-test, and disable ZA after detecting a mismatch.
- Add SME support to vlset.
- Clarifications and typo fixes in comments.
- Move sme_alloc() forward declaration back a patch.
[1] https://community.arm.com/developer/ip-products/processors/b/processors-ip-…
Mark Brown (37):
arm64/sve: Make sysctl interface for SVE reusable by SME
arm64/sve: Generalise vector length configuration prctl() for SME
arm64/sve: Minor clarification of ABI documentation
kselftest/arm64: Parameterise ptrace vector length information
kselftest/arm64: Allow signal tests to trigger from a function
kselftest/arm64: Add a test program to exercise the syscall ABI
tools/nolibc: Implement gettid()
arm64: cpufeature: Add has_feature_flag() match function
arm64/sme: Provide ABI documentation for SME
arm64/sme: System register and exception syndrome definitions
arm64/sme: Define macros for manually encoding SME instructions
arm64/sme: Early CPU setup for SME
arm64/sme: Basic enumeration support
arm64/sme: Identify supported SME vector lengths at boot
arm64/sme: Implement sysctl to set the default vector length
arm64/sme: Implement vector length configuration prctl()s
arm64/sme: Implement support for TPIDR2
arm64/sme: Implement SVCR context switching
arm64/sme: Implement streaming SVE context switching
arm64/sme: Implement ZA context switching
arm64/sme: Implement traps and syscall handling for SME
arm64/sme: Implement streaming SVE signal handling
arm64/sme: Implement ZA signal handling
arm64/sme: Implement ptrace support for streaming mode SVE registers
arm64/sme: Add ptrace support for ZA
arm64/sme: Disable streaming mode and ZA when flushing CPU state
arm64/sme: Save and restore streaming mode over EFI runtime calls
arm64/sme: Provide Kconfig for SME
kselftest/arm64: sme: Add streaming SME support to vlset
kselftest/arm64: Add tests for TPIDR2
kselftest/arm64: Extend vector configuration API tests to cover SME
kselftest/arm64: sme: Provide streaming mode SVE stress test
kselftest/arm64: Add stress test for SME ZA context switching
kselftest/arm64: signal: Add SME signal handling tests
kselftest/arm64: Add streaming SVE to SVE ptrace tests
kselftest/arm64: Add coverage for the ZA ptrace interface
kselftest/arm64: Add SME support to syscall ABI test
Documentation/arm64/elf_hwcaps.rst | 33 +
Documentation/arm64/index.rst | 1 +
Documentation/arm64/sme.rst | 430 ++++++++++++
Documentation/arm64/sve.rst | 72 +-
arch/arm64/Kconfig | 11 +
arch/arm64/include/asm/cpu.h | 4 +
arch/arm64/include/asm/cpufeature.h | 24 +
arch/arm64/include/asm/el2_setup.h | 45 ++
arch/arm64/include/asm/esr.h | 13 +-
arch/arm64/include/asm/exception.h | 1 +
arch/arm64/include/asm/fpsimd.h | 112 ++-
arch/arm64/include/asm/fpsimdmacros.h | 77 ++
arch/arm64/include/asm/hwcap.h | 8 +
arch/arm64/include/asm/kvm_arm.h | 1 +
arch/arm64/include/asm/processor.h | 18 +-
arch/arm64/include/asm/sysreg.h | 58 ++
arch/arm64/include/asm/thread_info.h | 2 +
arch/arm64/include/uapi/asm/hwcap.h | 8 +
arch/arm64/include/uapi/asm/ptrace.h | 69 +-
arch/arm64/include/uapi/asm/sigcontext.h | 55 +-
arch/arm64/kernel/cpufeature.c | 130 ++++
arch/arm64/kernel/cpuinfo.c | 13 +
arch/arm64/kernel/entry-common.c | 10 +
arch/arm64/kernel/entry-fpsimd.S | 31 +
arch/arm64/kernel/fpsimd.c | 657 ++++++++++++++++--
arch/arm64/kernel/process.c | 28 +-
arch/arm64/kernel/ptrace.c | 358 ++++++++--
arch/arm64/kernel/signal.c | 187 ++++-
arch/arm64/kernel/syscall.c | 34 +-
arch/arm64/kernel/traps.c | 1 +
arch/arm64/kvm/fpsimd.c | 3 +-
arch/arm64/kvm/reset.c | 8 +-
arch/arm64/tools/cpucaps | 2 +
include/uapi/linux/elf.h | 2 +
include/uapi/linux/prctl.h | 9 +
kernel/sys.c | 12 +
tools/include/nolibc/nolibc.h | 18 +
tools/testing/selftests/arm64/Makefile | 2 +-
tools/testing/selftests/arm64/abi/.gitignore | 2 +
tools/testing/selftests/arm64/abi/Makefile | 15 +
.../selftests/arm64/abi/syscall-abi-asm.S | 307 ++++++++
.../testing/selftests/arm64/abi/syscall-abi.c | 485 +++++++++++++
.../testing/selftests/arm64/abi/syscall-abi.h | 15 +
tools/testing/selftests/arm64/abi/tpidr2.c | 298 ++++++++
tools/testing/selftests/arm64/fp/.gitignore | 4 +
tools/testing/selftests/arm64/fp/Makefile | 12 +-
tools/testing/selftests/arm64/fp/rdvl-sme.c | 14 +
tools/testing/selftests/arm64/fp/rdvl.S | 16 +
tools/testing/selftests/arm64/fp/rdvl.h | 1 +
tools/testing/selftests/arm64/fp/ssve-stress | 59 ++
tools/testing/selftests/arm64/fp/sve-ptrace.c | 230 ++++--
tools/testing/selftests/arm64/fp/sve-test.S | 30 +
tools/testing/selftests/arm64/fp/vec-syscfg.c | 10 +
tools/testing/selftests/arm64/fp/vlset.c | 10 +-
tools/testing/selftests/arm64/fp/za-ptrace.c | 353 ++++++++++
tools/testing/selftests/arm64/fp/za-stress | 59 ++
tools/testing/selftests/arm64/fp/za-test.S | 431 ++++++++++++
.../testing/selftests/arm64/signal/.gitignore | 2 +
.../selftests/arm64/signal/test_signals.h | 2 +
.../arm64/signal/test_signals_utils.c | 5 +-
.../testcases/fake_sigreturn_sme_change_vl.c | 92 +++
.../arm64/signal/testcases/sme_trap_za.c | 36 +
.../selftests/arm64/signal/testcases/sme_vl.c | 70 ++
.../arm64/signal/testcases/ssve_regs.c | 129 ++++
64 files changed, 4986 insertions(+), 248 deletions(-)
create mode 100644 Documentation/arm64/sme.rst
create mode 100644 tools/testing/selftests/arm64/abi/.gitignore
create mode 100644 tools/testing/selftests/arm64/abi/Makefile
create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi-asm.S
create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.c
create mode 100644 tools/testing/selftests/arm64/abi/syscall-abi.h
create mode 100644 tools/testing/selftests/arm64/abi/tpidr2.c
create mode 100644 tools/testing/selftests/arm64/fp/rdvl-sme.c
create mode 100644 tools/testing/selftests/arm64/fp/ssve-stress
create mode 100644 tools/testing/selftests/arm64/fp/za-ptrace.c
create mode 100644 tools/testing/selftests/arm64/fp/za-stress
create mode 100644 tools/testing/selftests/arm64/fp/za-test.S
create mode 100644 tools/testing/selftests/arm64/signal/testcases/fake_sigreturn_sme_change_vl.c
create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_trap_za.c
create mode 100644 tools/testing/selftests/arm64/signal/testcases/sme_vl.c
create mode 100644 tools/testing/selftests/arm64/signal/testcases/ssve_regs.c
base-commit: fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf
--
2.30.2
If any sub-test in this icmp_redirect.sh is failing but not expected
to fail. The script will complain:
./icmp_redirect.sh: line 72: [: 1: unary operator expected
This is because when the sub-test is not expected to fail, we won't
pass any value for the xfail local variable in log_test() and thus
it's empty. Fix this by passing 0 as the 4th variable to log_test()
for non-xfail cases.
Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com>
---
tools/testing/selftests/net/icmp_redirect.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index ecbf57f..7b9d6e3 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -311,7 +311,7 @@ check_exception()
ip -netns h1 ro get ${H1_VRF_ARG} ${H2_N2_IP} | \
grep -E -v 'mtu|redirected' | grep -q "cache"
fi
- log_test $? 0 "IPv4: ${desc}"
+ log_test $? 0 "IPv4: ${desc}" 0
# No PMTU info for test "redirect" and "mtu exception plus redirect"
if [ "$with_redirect" = "yes" ] && [ "$desc" != "redirect exception plus mtu" ]; then
--
2.7.4