- Linux-kselftest-mirror - lists.linaro.org

[PATCH] kunit: Fix some comments which were mistakenly kerneldoc

by David Gow

The KUnit device helpers are documented with kerneldoc in their header file, but also have short comments over their implementation. These were mistakenly formatted as kerneldoc comments, even though they're not valid kerneldoc. It shouldn't cause any serious problems -- this file isn't included in the docs -- but it could be confusing, and causes warnings. Remove the extra '*' so that these aren't treated as kerneldoc. Fixes: d03c720e03bd ("kunit: Add APIs for managing devices") Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312181920.H4EPAH20-lkp@intel.com/ Signed-off-by: David Gow <davidgow(a)google.com> --- lib/kunit/device.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lib/kunit/device.c b/lib/kunit/device.c index 1db4305b615a..f5371287b375 100644 --- a/lib/kunit/device.c +++ b/lib/kunit/device.c @@ -60,7 +60,7 @@ static void kunit_device_release(struct device *d) kfree(to_kunit_device(d)); } -/** +/* * Create and register a KUnit-managed struct device_driver on the kunit_bus. * Returns an error pointer on failure. */ @@ -124,7 +124,7 @@ static struct kunit_device *kunit_device_register_internal(struct kunit *test, return kunit_dev; } -/** +/* * Create and register a new KUnit-managed device, using the user-supplied device_driver. * On failure, returns an error pointer. */ @@ -141,7 +141,7 @@ struct device *kunit_device_register_with_driver(struct kunit *test, } EXPORT_SYMBOL_GPL(kunit_device_register_with_driver); -/** +/* * Create and register a new KUnit-managed device, including a matching device_driver. * On failure, returns an error pointer. */ -- 2.43.0.472.g3155946c3a-goog

1 year, 11 months

2
1
0 0

[PATCH net-next v11 00/10] net: ethernet: am65-cpsw: Add mqprio, frame preemption & coalescing

by Roger Quadros

Hi, This series adds mqprio qdisc offload in channel mode, Frame Preemption MAC merge support and RX/TX coalesing for AM65 CPSW driver. In v11 following changes were made - Fix patch "net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode" by including units.h Changelog information in each patch file. cheers, -roger *** BLURB HERE *** Grygorii Strashko (2): net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode net: ethernet: ti: am65-cpsw: add sw tx/rx irq coalescing based on hrtimers Roger Quadros (6): net: ethernet: am65-cpsw: Build am65-cpsw-qos only if required net: ethernet: am65-cpsw: Rename TI_AM65_CPSW_TAS to TI_AM65_CPSW_QOS net: ethernet: am65-cpsw: cleanup TAPRIO handling net: ethernet: ti: am65-cpsw: Move code to avoid forward declaration net: ethernet: am65-cpsw: Move register definitions to header file net: ethernet: ti: am65-cpsw-qos: Add Frame Preemption MAC Merge support Vladimir Oltean (2): selftests: forwarding: ethtool_mm: support devices with higher rx-min-frag-size selftests: forwarding: ethtool_mm: fall back to aggregate if device does not report pMAC stats drivers/net/ethernet/ti/Kconfig | 14 +- drivers/net/ethernet/ti/Makefile | 3 +- drivers/net/ethernet/ti/am65-cpsw-ethtool.c | 246 ++++++ drivers/net/ethernet/ti/am65-cpsw-nuss.c | 64 +- drivers/net/ethernet/ti/am65-cpsw-nuss.h | 9 + drivers/net/ethernet/ti/am65-cpsw-qos.c | 708 +++++++++++++----- drivers/net/ethernet/ti/am65-cpsw-qos.h | 186 +++++ .../selftests/net/forwarding/ethtool_mm.sh | 48 +- tools/testing/selftests/net/forwarding/lib.sh | 9 + 9 files changed, 1100 insertions(+), 187 deletions(-) base-commit: c49b292d031e385abf764ded32cd953c77e73f2d -- 2.34.1

1 year, 11 months

3
13
0 0

[PATCH net-next 0/8] Convert net selftests to run in unique namespace (last part)

by Hangbin Liu

Here is the last part of converting net selftests to run in unique namespace. This part converts all left tests. After the conversion, we can run the net sleftests in parallel. e.g. # ./run_kselftest.sh -n -t net:reuseport_bpf TAP version 13 1..1 # selftests: net: reuseport_bpf ok 1 selftests: net: reuseport_bpf mod 10... # Socket 0: 0 # Socket 1: 1 ... # Socket 4: 19 # Testing filter add without bind... # SUCCESS # ./run_kselftest.sh -p -n -t net:cmsg_so_mark.sh -t net:cmsg_time.sh -t net:cmsg_ipv6.sh TAP version 13 1..3 # selftests: net: cmsg_so_mark.sh ok 1 selftests: net: cmsg_so_mark.sh # selftests: net: cmsg_time.sh ok 2 selftests: net: cmsg_time.sh # selftests: net: cmsg_ipv6.sh ok 3 selftests: net: cmsg_ipv6.sh # ./run_kselftest.sh -p -n -c net TAP version 13 1..95 # selftests: net: reuseport_bpf_numa ok 3 selftests: net: reuseport_bpf_numa # selftests: net: reuseport_bpf_cpu ok 2 selftests: net: reuseport_bpf_cpu # selftests: net: sk_bind_sendto_listen ok 9 selftests: net: sk_bind_sendto_listen # selftests: net: reuseaddr_conflict ok 5 selftests: net: reuseaddr_conflict ... Here is the part 1 link: https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com part 2 link: https://lore.kernel.org/netdev/20231206070801.1691247-1-liuhangbin@gmail.com part 3 link: https://lore.kernel.org/netdev/20231213060856.4030084-1-liuhangbin@gmail.com Hangbin Liu (8): selftests/net: convert gre_gso.sh to run it in unique namespace selftests/net: convert netns-name.sh to run it in unique namespace selftests/net: convert rtnetlink.sh to run it in unique namespace selftests/net: convert stress_reuseport_listen.sh to run it in unique namespace selftests/net: convert xfrm_policy.sh to run it in unique namespace selftests/net: use unique netns name for setup_loopback.sh setup_veth.sh selftests/net: convert pmtu.sh to run it in unique namespace kselftest/runner.sh: add netns support tools/testing/selftests/kselftest/runner.sh | 38 ++++- tools/testing/selftests/net/gre_gso.sh | 18 +-- tools/testing/selftests/net/gro.sh | 4 +- tools/testing/selftests/net/netns-name.sh | 44 +++--- tools/testing/selftests/net/pmtu.sh | 27 ++-- tools/testing/selftests/net/rtnetlink.sh | 34 +++-- tools/testing/selftests/net/setup_loopback.sh | 8 +- tools/testing/selftests/net/setup_veth.sh | 9 +- .../selftests/net/stress_reuseport_listen.sh | 6 +- tools/testing/selftests/net/toeplitz.sh | 14 +- tools/testing/selftests/net/xfrm_policy.sh | 138 +++++++++--------- tools/testing/selftests/run_kselftest.sh | 10 +- 12 files changed, 193 insertions(+), 157 deletions(-) -- 2.43.0

1 year, 11 months

2
9
0 0

[PATCH] selftests/net: remove unneeded semicolon

by Jiapeng Chong

No functional modification involved. ./tools/testing/selftests/net/tcp_ao/setsockopt-closed.c:121:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci(a)linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7771 Signed-off-by: Jiapeng Chong <jiapeng.chong(a)linux.alibaba.com> --- tools/testing/selftests/net/tcp_ao/setsockopt-closed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c index 7e4601b3f6a3..d5d0484b5d44 100644 --- a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c +++ b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c @@ -118,7 +118,7 @@ static void setsockopt_checked(int sk, int optname, void *optval, break; default: break; - }; + } __setsockopt_checked(sk, optname, false, optval, &len, err, cmd, tst); } -- 2.20.1.7.g153144c

1 year, 11 months

2
1
0 0

[PATCH net-next] selftest/tcp-ao: Rectify out-of-tree build

by Dmitry Safonov

Trivial fix for out-of-tree build that I wasn't testing previously: 1. Create a directory for library object files, fixes: > gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c > Assembler messages: > Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory > make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1 2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes: > In file included from lib/kconfig.c:6: > lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration > 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg, > | ^~~~~~~~~~ ... 3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore since commit f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL") 4. Also, while at here, drop .DEFAULT_GOAL definition: that has a self-explaining comment, that was valid when I made these selftests compile on local v4.19 kernel, but not needed since commit 8ce72dc32578 ("selftests: fix headers_install circular dependency") Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library") Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/ Signed-off-by: Dmitry Safonov <dima(a)arista.com> --- tools/testing/selftests/net/tcp_ao/Makefile | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/net/tcp_ao/Makefile b/tools/testing/selftests/net/tcp_ao/Makefile index 6343cfcf919b..8e60bae67aa9 100644 --- a/tools/testing/selftests/net/tcp_ao/Makefile +++ b/tools/testing/selftests/net/tcp_ao/Makefile @@ -17,22 +17,18 @@ TEST_IPV6_PROGS := $(TEST_BOTH_AF:%=%_ipv6) TEST_GEN_PROGS := $(TEST_IPV4_PROGS) $(TEST_IPV6_PROGS) top_srcdir := ../../../../.. -KSFT_KHDR_INSTALL := 1 include ../../lib.mk HOSTAR ?= ar -# Drop it on port to linux/master with commit 8ce72dc32578 -.DEFAULT_GOAL := all - LIBDIR := $(OUTPUT)/lib LIB := $(LIBDIR)/libaotst.a LDLIBS += $(LIB) -pthread LIBDEPS := lib/aolib.h Makefile CFLAGS := -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -CFLAGS += -I ../../../../../usr/include/ -iquote $(LIBDIR) -CFLAGS += -I ../../../../include/ +CFLAGS += $(KHDR_INCLUDES) +CFLAGS += -iquote ./lib/ -I ../../../../include/ # Library LIBSRC := kconfig.c netlink.c proc.c repair.c setup.c sock.c utils.c @@ -43,6 +39,7 @@ $(LIB): $(LIBOBJ) $(HOSTAR) rcs $@ $^ $(LIBDIR)/%.o: ./lib/%.c $(LIBDEPS) + mkdir -p $(LIBDIR) $(CC) $< $(CFLAGS) $(CPPFLAGS) -o $@ -c $(TEST_GEN_PROGS): $(LIB) --- base-commit: ceb2fe0d438644e1de06b9a6468a1fb8e2199c70 change-id: 20231219-b4-tcp-ao-selftests-out-of-tree-452f787f2d58 Best regards, -- Dmitry Safonov <dima(a)arista.com>

1 year, 11 months

2
1
0 0

[PATCH][next] selftests/net: Fix various spelling mistakes in TCP-AO tests

by Colin Ian King

There are a handful of spelling mistakes in test messages in the TCP-AIO selftests. Fix these. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/net/tcp_ao/connect-deny.c | 2 +- tools/testing/selftests/net/tcp_ao/lib/proc.c | 4 ++-- tools/testing/selftests/net/tcp_ao/setsockopt-closed.c | 2 +- tools/testing/selftests/net/tcp_ao/unsigned-md5.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/net/tcp_ao/connect-deny.c b/tools/testing/selftests/net/tcp_ao/connect-deny.c index 1ca78040d8b7..185a2f6e5ff3 100644 --- a/tools/testing/selftests/net/tcp_ao/connect-deny.c +++ b/tools/testing/selftests/net/tcp_ao/connect-deny.c @@ -55,7 +55,7 @@ static void try_accept(const char *tst_name, unsigned int port, const char *pwd, err = test_wait_fd(lsk, timeout, 0); if (err == -ETIMEDOUT) { if (!fault(TIMEOUT)) - test_fail("timeouted for accept()"); + test_fail("timed out for accept()"); } else if (err < 0) { test_error("test_wait_fd()"); } else { diff --git a/tools/testing/selftests/net/tcp_ao/lib/proc.c b/tools/testing/selftests/net/tcp_ao/lib/proc.c index 2322f4d4676d..2fb6dd8adba6 100644 --- a/tools/testing/selftests/net/tcp_ao/lib/proc.c +++ b/tools/testing/selftests/net/tcp_ao/lib/proc.c @@ -227,7 +227,7 @@ void netstat_print_diff(struct netstat *nsa, struct netstat *nsb) } if (nsb->counters_nr < nsa->counters_nr) - test_error("Unexpected: some counters dissapeared!"); + test_error("Unexpected: some counters disappeared!"); for (j = 0, i = 0; i < nsb->counters_nr; i++) { if (strcmp(nsb->counters[i].name, nsa->counters[j].name)) { @@ -244,7 +244,7 @@ void netstat_print_diff(struct netstat *nsa, struct netstat *nsb) j++; } if (j != nsa->counters_nr) - test_error("Unexpected: some counters dissapeared!"); + test_error("Unexpected: some counters disappeared!"); nsb = nsb->next; nsa = nsa->next; diff --git a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c index 7e4601b3f6a3..a329f42f40ce 100644 --- a/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c +++ b/tools/testing/selftests/net/tcp_ao/setsockopt-closed.c @@ -427,7 +427,7 @@ static void test_einval_del_key(void) sk = prepare_defs(TCP_AO_DEL_KEY, &del); del.set_current = 1; - setsockopt_checked(sk, TCP_AO_DEL_KEY, &del, ENOENT, "set non-exising current key"); + setsockopt_checked(sk, TCP_AO_DEL_KEY, &del, ENOENT, "set non-existing current key"); sk = prepare_defs(TCP_AO_DEL_KEY, &del); del.set_rnext = 1; diff --git a/tools/testing/selftests/net/tcp_ao/unsigned-md5.c b/tools/testing/selftests/net/tcp_ao/unsigned-md5.c index 7cffde02d2be..14addfd46468 100644 --- a/tools/testing/selftests/net/tcp_ao/unsigned-md5.c +++ b/tools/testing/selftests/net/tcp_ao/unsigned-md5.c @@ -72,7 +72,7 @@ static void try_accept(const char *tst_name, unsigned int port, err = test_wait_fd(lsk, timeout, 0); if (err == -ETIMEDOUT) { if (!fault(TIMEOUT)) - test_fail("timeouted for accept()"); + test_fail("timed out for accept()"); } else if (err < 0) { test_error("test_wait_fd()"); } else { -- 2.39.2

1 year, 11 months

4
3
0 0

[PATCH v4] tracing/selftests: Add ownership modification tests for eventfs

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> As there were bugs found with the ownership of eventfs dynamic file creation. Add a test to test it. It will remount tracefs with a different gid and check the ownership of the eventfs directory, as well as the system and event directories. It will also check the event file directories. It then does a chgrp on each of these as well to see if they all get updated as expected. Then it remounts the tracefs file system back to the original group and makes sure that all the updated files and directories were reset back to the original ownership. It does the same for instances that change the ownership of he instance directory. Note, because the uid is not reset by a remount, it is tested for every file by switching it to a new owner and then back again. Acked-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Tested-by: Masami Hiramatsu (Google) <mhiramat(a)kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- Changes since v3: https://lore.kernel.org/linux-trace-kernel/20231221211229.13398ef3@gandalf.… - Added missing SPDX and removed exec permission from file (Shuah Khan) .../ftrace/test.d/00basic/test_ownership.tc | 114 ++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc diff --git a/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc b/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc new file mode 100644 index 000000000000..add7d5bf585d --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc @@ -0,0 +1,114 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test file and directory owership changes for eventfs + +original_group=`stat -c "%g" .` +original_owner=`stat -c "%u" .` + +mount_point=`stat -c '%m' .` +mount_options=`mount | grep "$mount_point" | sed -e 's/.*($.*$).*/\1/'` + +# find another owner and group that is not the original +other_group=`tac /etc/group | grep -v ":$original_group:" | head -1 | cut -d: -f3` +other_owner=`tac /etc/passwd | grep -v ":$original_owner:" | head -1 | cut -d: -f3` + +# Remove any group ownership already +new_options=`echo "$mount_options" | sed -e "s/gid=[0-9]*/gid=$other_group/"` + +if [ "$new_options" = "$mount_options" ]; then + new_options="$mount_options,gid=$other_group" + mount_options="$mount_options,gid=$original_group" +fi + +canary="events/timer events/timer/timer_cancel events/timer/timer_cancel/format" + +test() { + file=$1 + test_group=$2 + + owner=`stat -c "%u" $file` + group=`stat -c "%g" $file` + + echo "testing $file $owner=$original_owner and $group=$test_group" + if [ $owner -ne $original_owner ]; then + exit_fail + fi + if [ $group -ne $test_group ]; then + exit_fail + fi + + # Note, the remount does not update ownership so test going to and from owner + echo "test owner $file to $other_owner" + chown $other_owner $file + owner=`stat -c "%u" $file` + if [ $owner -ne $other_owner ]; then + exit_fail + fi + + chown $original_owner $file + owner=`stat -c "%u" $file` + if [ $owner -ne $original_owner ]; then + exit_fail + fi + +} + +run_tests() { + for d in "." "events" "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events + test "events" $original_group + for d in "." "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched + test "events/sched" $original_group + for d in "." "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched/sched_switch + test "events/sched/sched_switch" $original_group + for d in "." "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched/sched_switch/enable + test "events/sched/sched_switch/enable" $original_group + for d in "." $canary; do + test "$d" $other_group + done +} + +mount -o remount,"$new_options" . + +run_tests + +mount -o remount,"$mount_options" . + +for d in "." "events" "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $original_group +done + +# check instances as well + +chgrp $other_group instances + +instance="$(mktemp -u test-XXXXXX)" + +mkdir instances/$instance + +cd instances/$instance + +run_tests + +cd ../.. + +rmdir instances/$instance + +chgrp $original_group instances + +exit 0 -- 2.42.0

1 year, 11 months

2
1
0 0

[PATCH v3] tracing/selftests: Add ownership modification tests for eventfs

by Steven Rostedt

From: "Steven Rostedt (Google)" <rostedt(a)goodmis.org> As there were bugs found with the ownership of eventfs dynamic file creation. Add a test to test it. It will remount tracefs with a different gid and check the ownership of the eventfs directory, as well as the system and event directories. It will also check the event file directories. It then does a chgrp on each of these as well to see if they all get updated as expected. Then it remounts the tracefs file system back to the original group and makes sure that all the updated files and directories were reset back to the original ownership. It does the same for instances that change the ownership of he instance directory. Note, because the uid is not reset by a remount, it is tested for every file by switching it to a new owner and then back again. Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- Changes since v2: https://lore.kernel.org/linux-trace-kernel/20231221194516.53e1ee43@gandalf.… - Changed the instance test name from "foo-$(mktemp -u XXXXX)" to "$(mktemp -u test-XXXXXX)" as Masami reported that busybox mktemp only works with 6 Xs and not 5. Also changed "foo" to "test" and placed it into the mktemp format. .../ftrace/test.d/00basic/test_ownership.tc | 113 ++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100755 tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc diff --git a/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc b/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc new file mode 100755 index 000000000000..4c20be3a714a --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/test_ownership.tc @@ -0,0 +1,113 @@ +#!/bin/sh +# description: Test file and directory owership changes for eventfs + +original_group=`stat -c "%g" .` +original_owner=`stat -c "%u" .` + +mount_point=`stat -c '%m' .` +mount_options=`mount | grep "$mount_point" | sed -e 's/.*($.*$).*/\1/'` + +# find another owner and group that is not the original +other_group=`tac /etc/group | grep -v ":$original_group:" | head -1 | cut -d: -f3` +other_owner=`tac /etc/passwd | grep -v ":$original_owner:" | head -1 | cut -d: -f3` + +# Remove any group ownership already +new_options=`echo "$mount_options" | sed -e "s/gid=[0-9]*/gid=$other_group/"` + +if [ "$new_options" = "$mount_options" ]; then + new_options="$mount_options,gid=$other_group" + mount_options="$mount_options,gid=$original_group" +fi + +canary="events/timer events/timer/timer_cancel events/timer/timer_cancel/format" + +test() { + file=$1 + test_group=$2 + + owner=`stat -c "%u" $file` + group=`stat -c "%g" $file` + + echo "testing $file $owner=$original_owner and $group=$test_group" + if [ $owner -ne $original_owner ]; then + exit_fail + fi + if [ $group -ne $test_group ]; then + exit_fail + fi + + # Note, the remount does not update ownership so test going to and from owner + echo "test owner $file to $other_owner" + chown $other_owner $file + owner=`stat -c "%u" $file` + if [ $owner -ne $other_owner ]; then + exit_fail + fi + + chown $original_owner $file + owner=`stat -c "%u" $file` + if [ $owner -ne $original_owner ]; then + exit_fail + fi + +} + +run_tests() { + for d in "." "events" "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events + test "events" $original_group + for d in "." "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched + test "events/sched" $original_group + for d in "." "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched/sched_switch + test "events/sched/sched_switch" $original_group + for d in "." "events/sched/sched_switch/enable" $canary; do + test "$d" $other_group + done + + chgrp $original_group events/sched/sched_switch/enable + test "events/sched/sched_switch/enable" $original_group + for d in "." $canary; do + test "$d" $other_group + done +} + +mount -o remount,"$new_options" . + +run_tests + +mount -o remount,"$mount_options" . + +for d in "." "events" "events/sched" "events/sched/sched_switch" "events/sched/sched_switch/enable" $canary; do + test "$d" $original_group +done + +# check instances as well + +chgrp $other_group instances + +instance="$(mktemp -u test-XXXXXX)" + +mkdir instances/$instance + +cd instances/$instance + +run_tests + +cd ../.. + +rmdir instances/$instance + +chgrp $original_group instances + +exit 0 -- 2.42.0

1 year, 11 months

3
5
0 0

[PATCH RFC v2 00/22] KVM: arm64: Implement support for SME in non-protected guests

by Mark Brown

This series implements support for SME use in non-protected KVM guests. Much of this is very similar to SVE, the main additional challenge that SME presents is that it introduces two new controls which change the registers seen by guests: - PSTATE.ZA enables the ZA matrix register and, if SME2 is supported, the ZT0 LUT register. - PSTATE.SM enables streaming mode, a new floating point mode which uses the SVE register set with a separately configured vector length. In streaming mode implementation of the FFR register is optional. It is also permitted to build systems which support SME without SVE, in this case when not in streaming mode no SVE registers or instructions are available. Further, there is no requirement that there be any overlap in the set of vector lengths supported by SVE and SME in a system, this is expected to be a common situation in practical systems. Since there is a new vector length to configure we introduce a new feature parallel to the existing SVE one with a new pseudo register for the streaming mode vector length. Due to the overlap with SVE caused by streaming mode rather than finalising SME as a separate feature we use the existing SVE finalisation to also finalise SME, a new define KVM_ARM_VCPU_VEC is provided to help make user code clearer. Finalising SVE and SME separately would introduce complication with register access since finalising SVE makes the SVE regsiters writeable by userspace and doing multiple finalisations results in an error being reported. Dealing with a state where the SVE registers are writeable due to one of SVE or SME being finalised but may have their VL changed by the other being finalised seems like needless complexity with minimal practical utility, it seems clearer to just express directly that only one finalisation can be done in the ABI. We represent the streaming mode registers to userspace by always using the existing SVE registers to access the floating point state, using the larger of the SME and (if enabled for the guest) SVE vector lengths. There are a large number of subfeatures for SME, most of which only offer additional instructions but some of which (SME2 and FA64) add architectural state. The expectation is that these will be configured via the ID registers but since the mechanism for doing this is still unclear the current code enables SME2 and FA64 for the guest if the host supports them regardless of what the ID registers say. Since we do not yet have support for SVE in protected guests and SME is very reliant on SVE this series does not implement support for SME in protected guests. This will be added separately once SVE support is merged into mainline (or along with merging that), there is code for protected guests using SVE in the Android tree. The new KVM_ARM_VCPU_VEC feature and ZA and ZT0 registers have not been added to the get-reg-list selftest, the idea of supporting additional features there without restructuring the program to generate all possible feature combinations has been rejected. I will post a separate series which does that restructuring. I am seeing some test failures currently which I've not got to the bottom of, at this point I'm reasonably sure these are preexisting issues in the kernel which are more apparent in a guest. To: Marc Zyngier <maz(a)kernel.org> To: Oliver Upton <oliver.upton(a)linux.dev> To: James Morse <james.morse(a)arm.com> To: Suzuki K Poulose <suzuki.poulose(a)arm.com> To: Catalin Marinas <catalin.marinas(a)arm.com> To: Will Deacon <will(a)kernel.org> Cc: <linux-arm-kernel(a)lists.infradead.org> Cc: <kvmarm(a)lists.linux.dev> Cc: <linux-kernel(a)vger.kernel.org> To: Paolo Bonzini <pbonzini(a)redhat.com> To: Jonathan Corbet <corbet(a)lwn.net> Cc: <kvm(a)vger.kernel.org> Cc: <linux-doc(a)vger.kernel.org> To: Shuah Khan <shuah(a)kernel.org> Cc: <linux-kselftest(a)vger.kernel.org> Signed-off-by: Mark Brown <broonie(a)kernel.org> Changes in v2: - Rebase onto v6.7-rc3. - Configure subfeatures based on host system only. - Complete nVHE support. - There was some snafu with sending v1 out, it didn't make it to the lists but in case it hit people's inboxes I'm sending as v2. --- Mark Brown (22): KVM: arm64: Document why we trap SVE access from the host arm64/fpsimd: Make SVE<->FPSIMD rewriting available to KVM KVM: arm64: Move SVE state access macros after feature test macros KVM: arm64: Store vector lengths in an array KVM: arm64: Document the KVM ABI for SME KVM: arm64: Make FFR restore optional in __sve_restore_state() KVM: arm64: Define guest flags for SME KVM: arm64: Rename SVE finalization constants to be more general KVM: arm64: Basic SME system register descriptions KVM: arm64: Add support for TPIDR2_EL0 KVM: arm64: Make SMPRI_EL1 RES0 for SME guests KVM: arm64: Make SVCR a normal system register KVM: arm64: Context switch SME state for guest KVM: arm64: Manage and handle SME traps KVM: arm64: Implement SME vector length configuration KVM: arm64: Rename sve_state_reg_region KVM: arm64: Support userspace access to streaming mode SVE registers KVM: arm64: Expose ZA to userspace KVM: arm64: Provide userspace access to ZT0 KVM: arm64: Support SME version configuration via ID registers KVM: arm64: Provide userspace ABI for enabling SME KVM: arm64: selftests: Add SME system registers to get-reg-list Documentation/virt/kvm/api.rst | 104 +++++--- arch/arm64/include/asm/fpsimd.h | 5 + arch/arm64/include/asm/kvm_emulate.h | 13 +- arch/arm64/include/asm/kvm_host.h | 99 +++++--- arch/arm64/include/asm/kvm_hyp.h | 3 +- arch/arm64/include/uapi/asm/kvm.h | 33 +++ arch/arm64/kernel/fpsimd.c | 51 +++- arch/arm64/kvm/arm.c | 16 +- arch/arm64/kvm/fpsimd.c | 266 ++++++++++++++++++--- arch/arm64/kvm/guest.c | 230 +++++++++++++++--- arch/arm64/kvm/handle_exit.c | 11 + arch/arm64/kvm/hyp/fpsimd.S | 11 +- arch/arm64/kvm/hyp/include/hyp/switch.h | 86 ++++++- arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 16 ++ arch/arm64/kvm/hyp/nvhe/hyp-main.c | 60 ++++- arch/arm64/kvm/hyp/nvhe/switch.c | 13 +- arch/arm64/kvm/hyp/vhe/switch.c | 3 + arch/arm64/kvm/reset.c | 150 +++++++++--- arch/arm64/kvm/sys_regs.c | 67 +++++- include/uapi/linux/kvm.h | 1 + tools/testing/selftests/kvm/aarch64/get-reg-list.c | 32 ++- 21 files changed, 1063 insertions(+), 207 deletions(-) --- base-commit: 4ae6e89253b387476c2ba0202c3a80f2e1284e91 change-id: 20230301-kvm-arm64-sme-06a1246d3636 Best regards, -- Mark Brown <broonie(a)kernel.org>

1 year, 11 months

1
22
0 0

[PATCH v2 1/2] kunit: Allow passing function pointer to kunit_activate_static_stub()

by Richard Fitzgerald

Swap the arguments to typecheck_fn() in kunit_activate_static_stub() so that real_fn_addr can be either the function itself or a pointer to that function. This is useful to simplify redirecting static functions in a module. Having to pass the actual function meant that it must be exported from the module. Either making the 'static' and EXPORT_SYMBOL*() conditional (which makes the code messy), or change it to always exported (which increases the export namespace and prevents the compiler inlining a trivial stub function in non-test builds). With the original definition of kunit_activate_static_stub() the address of real_fn_addr was passed to typecheck_fn() as the type to be passed. This meant that if real_fn_addr was a pointer-to-function it would resolve to a ** instead of a *, giving an error like this: error: initialization of ‘int (**)(int)’ from incompatible pointer type ‘int (*)(int)’ [-Werror=incompatible-pointer-types] kunit_activate_static_stub(test, add_one_fn_ptr, subtract_one); | ^~~~~~~~~~~~ ./include/linux/typecheck.h:21:25: note: in definition of macro ‘typecheck_fn’ 21 | ({ typeof(type) __tmp = function; \ Swapping the arguments to typecheck_fn makes it take the type of a pointer to the replacement function. Either a function or a pointer to function can be assigned to that. For example: static int some_function(int x) { /* whatever */ } int (* some_function_ptr)(int) = some_function; static int replacement(int x) { /* whatever */ } Then: kunit_activate_static_stub(test, some_function, replacement); yields: typecheck_fn(typeof(&replacement), some_function); and: kunit_activate_static_stub(test, some_function_ptr, replacement); yields: typecheck_fn(typeof(&replacement), some_function_ptr); The two typecheck_fn() then resolve to: int (*__tmp)(int) = some_function; and int (*__tmp)(int) = some_function_ptr; Both of these are valid. In the first case the compiler inserts an implicit '&' to take the address of the supplied function, and in the second case the RHS is already a pointer to the same type. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Reviewed-by: Rae Moar <rmoar(a)google.com> --- No changes since V1. --- include/kunit/static_stub.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/static_stub.h b/include/kunit/static_stub.h index 85315c80b303..bf940322dfc0 100644 --- a/include/kunit/static_stub.h +++ b/include/kunit/static_stub.h @@ -93,7 +93,7 @@ void __kunit_activate_static_stub(struct kunit *test, * The redirection can be disabled again with kunit_deactivate_static_stub(). */ #define kunit_activate_static_stub(test, real_fn_addr, replacement_addr) do { \ - typecheck_fn(typeof(&real_fn_addr), replacement_addr); \ + typecheck_fn(typeof(&replacement_addr), real_fn_addr); \ __kunit_activate_static_stub(test, real_fn_addr, replacement_addr); \ } while (0) -- 2.30.2

1 year, 11 months

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror