- Linux-kselftest-mirror - lists.linaro.org

by Mickaël Salaün

Hi, Commit cb2c7d1a1776 ("landlock: Support filesystem access-control") introduced a new ARCH_EPHEMERAL_INODES configuration, only enabled for User-Mode Linux. The reason was that UML's hostfs managed inodes in an ephemeral way: from the kernel point of view, the same inode struct could be created several times while being used by user space because the kernel didn't hold references to inodes. Because Landlock (and probably other subsystems) ties properties (i.e. access rights) to inode objects, it wasn't possible to create rules that match inodes and then allow specific accesses. This patch series fixes the way UML manages inodes according to the underlying filesystem. They are now properly handles as for other filesystems, which enables to support Landlock (and probably other features). Backporting these patches requires some selftest harness patches backports too. Regards, Mickaël Salaün (5): hostfs: Fix ephemeral inodes selftests/landlock: Don't create useless file layouts selftests/landlock: Add supports_filesystem() helper selftests/landlock: Make mounts configurable selftests/landlock: Add tests for pseudo filesystems arch/Kconfig | 7 - arch/um/Kconfig | 1 - fs/hostfs/hostfs.h | 1 + fs/hostfs/hostfs_kern.c | 213 ++++++------ fs/hostfs/hostfs_user.c | 1 + security/landlock/Kconfig | 2 +- tools/testing/selftests/landlock/config | 8 +- tools/testing/selftests/landlock/fs_test.c | 381 +++++++++++++++++++-- 8 files changed, 472 insertions(+), 142 deletions(-) base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6 -- 2.39.2

2 years

3
15
0 0

[PATCH v1 0/2] Unify uapi bitsperlong.h

by Tiezhu Yang

v1: -- Rebase on 6.4-rc6 -- Only unify uapi bitsperlong.h for arm64, riscv and loongarch -- Remove uapi bitsperlong.h of hexagon and microblaze in a new patch Here is the RFC patch: https://lore.kernel.org/linux-arch/1683615903-10862-1-git-send-email-yangti… Tiezhu Yang (2): asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch tools arch: Remove uapi bitsperlong.h of hexagon and microblaze arch/arm64/include/uapi/asm/bitsperlong.h | 24 ------------------- arch/loongarch/include/uapi/asm/bitsperlong.h | 9 -------- arch/riscv/include/uapi/asm/bitsperlong.h | 14 ----------- include/uapi/asm-generic/bitsperlong.h | 10 ++++++++ tools/arch/arm64/include/uapi/asm/bitsperlong.h | 24 ------------------- tools/arch/hexagon/include/uapi/asm/bitsperlong.h | 27 ---------------------- .../arch/loongarch/include/uapi/asm/bitsperlong.h | 9 -------- .../arch/microblaze/include/uapi/asm/bitsperlong.h | 2 -- tools/arch/riscv/include/uapi/asm/bitsperlong.h | 14 ----------- tools/include/uapi/asm-generic/bitsperlong.h | 11 +++++++++ tools/include/uapi/asm/bitsperlong.h | 6 ----- 11 files changed, 21 insertions(+), 129 deletions(-) delete mode 100644 arch/arm64/include/uapi/asm/bitsperlong.h delete mode 100644 arch/loongarch/include/uapi/asm/bitsperlong.h delete mode 100644 arch/riscv/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/arm64/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/hexagon/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/loongarch/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/microblaze/include/uapi/asm/bitsperlong.h delete mode 100644 tools/arch/riscv/include/uapi/asm/bitsperlong.h -- 2.1.0

2 years

1
2
0 0

[PATCH 1/2] selftests: mm: remove wrong kernel header inclusion

by Muhammad Usama Anjum

It is wrong to include unprocessed user header files directly. They are processed to "<source_tree>/usr/include" by running "make headers" and they are included in selftests by kselftest makefiles automatically with help of KHDR_INCLUDES variable. These headers should always bulilt first before building kselftests. Fixes: 07115fcc15b4 ("selftests/mm: add new selftests for KSM") Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/mm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 95acb099315e..e6cd60ca9e48 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -29,7 +29,7 @@ MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/' -e 's/ppc64.*/p # LDLIBS. MAKEFLAGS += --no-builtin-rules -CFLAGS = -Wall -I $(top_srcdir) -I $(top_srcdir)/tools/include/uapi $(EXTRA_CFLAGS) $(KHDR_INCLUDES) +CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) LDLIBS = -lrt -lpthread TEST_GEN_PROGS = cow -- 2.39.2

2 years

2
2
0 0

[PATCH v1 1/1] selftests: mm: uufd-unit-tests: remove a format warning in printf

by Mirsad Todorovac

GCC 11.3.0 issued warnings about macros and types of arguments [edited]: gcc -Wall -I ../tools/testing/selftests/../../.. \ -I ../tools/testing/selftests/../../../tools/include/uapi \ -isystem ../usr/include -no-pie uffd-unit-tests.c vm_util.c \ uffd-common.c -lrt -lpthread -o \ ../tools/testing/selftests/mm/uffd-unit-tests uffd-unit-tests.c: In function ‘main’: uffd-unit-tests.c:1198:41: warning: format not a string literal and no \ format arguments [-Wformat-security] 1198 | uffd_test_start(test_name); | ^~~~~~~~~ uffd-unit-tests.c:100:24: note: in definition of macro ‘uffd_test_start’ 100 | printf(__VA_ARGS__); \ | ^~~~~~~~~~~ uffd-unit-tests.c:1205:33: warning: format not a string literal and no \ format arguments [-Wformat-security] 1205 | uffd_test_skip(errmsg); | ^~~~~~~~~~~~~~ The macros are defined as: #define uffd_test_start(...) do { \ printf("Testing "); \ printf(__VA_ARGS__); \ printf("... "); \ fflush(stdout); \ } while (0) #define uffd_test_skip(...) do { \ printf("skipped [reason: "); \ printf(__VA_ARGS__); \ printf("]\n"); \ ksft_inc_xskip_cnt(); \ } while (0) Minor workaround, adding "%s" first argument to macro expansion calls seems to be the easiest way to eliminate the warnings. Cc: Peter Xu <peterx(a)redhat.com> Cc: linux-mm(a)kvack.org Cc: linux-kselftest(a)vger.kernel.org Fixes: 43759d44dc34 ("selftests/mm: add uffdio register ioctls test") Fixes: 16a45b57cbf2 ("selftests/mm: add framework for uffd-unit-test") Signed-off-by: Mirsad Todorovac <mirsad.todorovac(a)alu.unizg.hr> --- tools/testing/selftests/mm/uffd-unit-tests.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/uffd-unit-tests.c b/tools/testing/selftests/mm/uffd-unit-tests.c index 269c86768a02..d356dd271c84 100644 --- a/tools/testing/selftests/mm/uffd-unit-tests.c +++ b/tools/testing/selftests/mm/uffd-unit-tests.c @@ -1195,14 +1195,14 @@ int main(int argc, char *argv[]) snprintf(test_name, sizeof(test_name), "%s on %s", test->name, mem_type->name); - uffd_test_start(test_name); + uffd_test_start("%s", test_name); if (!uffd_feature_supported(test)) { uffd_test_skip("feature missing"); continue; } if (uffd_setup_environment(&args, test, mem_type, &errmsg)) { - uffd_test_skip(errmsg); + uffd_test_skip("%s", errmsg); continue; } test->uffd_fn(&args); -- 2.34.1

2 years

3
3
0 0

[PATCH v3 00/19] selftests/resctrl: Fixes and cleanups

by Ilpo Järvinen

Here is a series with some fixes and cleanups to resctrl selftests. In v3, the rewritten CAT test is not included as an issue was discovered in one of its components requiring further work before it can be included to mainline. v3: - Don't include rewritten CAT test into this series! - Tweak wildcard style in Makefile - Fix many changelog typos, remove some wrong claims, and generally improve them. - Add fix to PARENT_EXIT() to unmount resctrl FS - Add unmounting resctrl FS before starting any tests - Add fix for buf leak - Add fix for perf fd closing - Split mount/remount/umount patches differently - Use size_t and %zu for span - Keep MBM print as MB, only internally use span in bytes - Drop start_buf global from fill_buf v2 (was sent with CAT test rewrite which is no longer included in v3): - Rebased on top of next to solve the conflicts - Added 2 patches related to resctrl FS mount/umount (fix + cleanup) - Consistently use "alloc" in cache_alloc_size() - CAT test error handling tweaked - Remove a spurious newline change from the CAT patch - Small improvements to changelogs Ilpo Järvinen (19): selftests/resctrl: Add resctrl.h into build deps selftests/resctrl: Don't leak buffer in fill_cache() selftests/resctrl: Unmount resctrl FS if child fails to run benchmark selftests/resctrl: Close perf value read fd on errors selftests/resctrl: Unmount resctrl FS before starting the first test selftests/resctrl: Move resctrl FS mount/umount to higher level selftests/resctrl: Refactor remount_resctrl(bool mum_resctrlfs) to mount_resctrl() selftests/resctrl: Remove mum_resctrlfs from struct resctrl_val_param selftests/resctrl: Convert span to size_t selftests/resctrl: Express span internally in bytes selftests/resctrl: Remove duplicated preparation for span arg selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() selftests/resctrl: Remove unnecessary startptr global from fill_buf selftests/resctrl: Improve parameter consistency in fill_buf selftests/resctrl: Don't pass test name to fill_buf selftests/resctrl: Don't use variable argument list for ->setup() selftests/resctrl: Move CAT/CMT test global vars to function they are used in selftests/resctrl: Pass the real number of tests to show_cache_info() selftests/resctrl: Remove test type checks from cat_val() tools/testing/selftests/resctrl/Makefile | 2 +- tools/testing/selftests/resctrl/cache.c | 64 +++++++------- tools/testing/selftests/resctrl/cat_test.c | 28 ++---- tools/testing/selftests/resctrl/cmt_test.c | 29 ++----- tools/testing/selftests/resctrl/fill_buf.c | 87 +++++++------------ tools/testing/selftests/resctrl/mba_test.c | 9 +- tools/testing/selftests/resctrl/mbm_test.c | 17 ++-- tools/testing/selftests/resctrl/resctrl.h | 17 ++-- .../testing/selftests/resctrl/resctrl_tests.c | 82 +++++++++++------ tools/testing/selftests/resctrl/resctrl_val.c | 7 +- tools/testing/selftests/resctrl/resctrlfs.c | 57 ++++++------ 11 files changed, 169 insertions(+), 230 deletions(-) -- 2.30.2

2 years

2
20
0 0

[PATCH net-next v2] selftests: net: vxlan: Fix selftest regression after changes in iproute2.

by Vladimir Nikishkin

The iproute2 output that eventually landed upstream is different than the one used in this test, resulting in failures. Fix by adjusting the test to use iproute2's JSON output, which is more stable than regular output. Fixes: 305c04189997 ("selftests: net: vxlan: Add tests for vxlan nolocalbypass option.") Signed-off-by: Vladimir Nikishkin <vladimir(a)nikishkin.pw> --- v1=>v2: Fix indentation by tabs. tools/testing/selftests/net/test_vxlan_nolocalbypass.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh index 46067db53068..f75212bf142c 100755 --- a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh +++ b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh @@ -130,7 +130,7 @@ nolocalbypass() run_cmd "tc -n ns1 qdisc add dev lo clsact" run_cmd "tc -n ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop" - run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'" log_test $? 0 "localbypass enabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" @@ -140,7 +140,7 @@ nolocalbypass() run_cmd "ip -n ns1 link set dev vx0 type vxlan nolocalbypass" - run_cmd "ip -n ns1 -d link show dev vx0 | grep 'nolocalbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == false'" log_test $? 0 "localbypass disabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" @@ -150,7 +150,7 @@ nolocalbypass() run_cmd "ip -n ns1 link set dev vx0 type vxlan localbypass" - run_cmd "ip -n ns1 -d link show dev vx0 | grep ' localbypass'" + run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[][\"linkinfo\"][\"info_data\"][\"localbypass\"] == true'" log_test $? 0 "localbypass enabled" run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" -- 2.35.8 -- Fastmail.

2 years

3
2
0 0

[BUG] selftests: drivers/net/bonding: bond-arp-interval-causes-panic.sh: Cannot find device "link1_1"

by Mirsad Goran Todorovac

Hi, The test failed with the latest torvalds tree kernel 6.4-rc5-00305-g022ce8862dff on AMD Ryzen 9 and Ubuntu 22.04 Jammy. The config is a merge of Ubuntu generic config and selftest config files. Debug output with `set -x` is [edited]: root@host:selftests/drivers/net/bonding# ./bond-arp-interval-causes-panic.sh Cannot find device "link1_1" root@defiant:/home/marvin/linux/kernel/linux_torvalds/tools/testing/selftests/drivers/net/bonding# vi !$ vi ./bond-arp-interval-causes-panic.sh root@host:selftests/drivers/net/bonding# ./bond-arp-interval-causes-panic.sh + test 0 -ne 0 + trap finish EXIT + client_ip4=192.168.1.198 + server_ip4=192.168.1.254 + echo 180 + ip link add dev link1_1 type veth peer name link1_2 + ip netns add server + ip link set dev link1_2 netns server up name eth0 + ip netns exec server ip addr add 192.168.1.254/24 dev eth0 + ip netns add client + ip link set dev link1_1 netns client down name eth0 + ip netns exec client ip link add dev bond0 down type bond mode 1 miimon 100 all_slaves_active 1 + ip netns exec client ip link set dev eth0 down master bond0 + ip netns exec client ip link set dev bond0 up + ip netns exec client ip addr add 192.168.1.198/24 dev bond0 + ip netns exec client ping -c 5 192.168.1.254 + finish + ip netns delete server + ip netns delete client + ip link del link1_1 Cannot find device "link1_1" + true root@host:testing/selftests/drivers/net/bonding# uname -rms Linux 6.4.0-rc5-kmlk-netdbg-iwlwifi-00305-g022ce8862dff x86_64 root@host:testing/selftests/drivers/net/bonding# Some debugging: I have added some "ip link show" commands in the finish() function: finish() { ip link show ip netns delete server || true ip netns delete client || true ip link show ip link del link1_1 || true } Now the debug output is like this: root@host:selftests/drivers/net/bonding# ./bond-arp-interval-causes-panic.sh + test 0 -ne 0 + trap finish EXIT + client_ip4=192.168.1.198 + server_ip4=192.168.1.254 + echo 180 + ip link add dev link1_1 type veth peer name link1_2 + ip netns add server + ip link set dev link1_2 netns server up name eth0 + ip netns exec server ip addr add 192.168.1.254/24 dev eth0 + ip netns add client + ip link set dev link1_1 netns client down name eth0 + ip netns exec client ip link add dev bond0 down type bond mode 1 miimon 100 all_slaves_active 1 + ip netns exec client ip link set dev eth0 down master bond0 + ip netns exec client ip link set dev bond0 up + ip netns exec client ip addr add 192.168.1.198/24 dev bond0 + ip netns exec client ping -c 5 192.168.1.254 + finish + ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:fc:ca:49:e2:d4 brd ff:ff:ff:ff:ff:ff 3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 4: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 5: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 8: ip6_vti0@NONE: <NOARP> mtu 1332 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 325b:a7df:c8db:: 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 76d3:be76:4187:: 11: ip6gre0@NONE: <NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre6 :: brd :: permaddr 569b:65fd:b94b:: 12: enp16s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 9c:6b:00:01:fb:80 brd ff:ff:ff:ff:ff:ff + ip netns delete server + ip netns delete client + ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:fc:ca:49:e2:d4 brd ff:ff:ff:ff:ff:ff 3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 4: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 5: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 8: ip6_vti0@NONE: <NOARP> mtu 1332 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 325b:a7df:c8db:: 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 76d3:be76:4187:: 11: ip6gre0@NONE: <NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre6 :: brd :: permaddr 569b:65fd:b94b:: 12: enp16s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 9c:6b:00:01:fb:80 brd ff:ff:ff:ff:ff:ff + ip link del link1_1 Cannot find device "link1_1" + true root@host:selftests/drivers/net/bonding# Adding more `ip link show` before and after operations with link_1 had shown that `ip link set dev link1_1 netns client down name eth0` command shuts down the link, so the `ip link del link1_1` doesn't succeed, as seen here: + ip netns exec server ip addr add 192.168.1.254/24 dev eth0 + ip netns add client + ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:fc:ca:49:e2:d4 brd ff:ff:ff:ff:ff:ff 3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 4: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 5: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 8: ip6_vti0@NONE: <NOARP> mtu 1332 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 325b:a7df:c8db:: 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 76d3:be76:4187:: 11: ip6gre0@NONE: <NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre6 :: brd :: permaddr 569b:65fd:b94b:: 12: enp16s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 9c:6b:00:01:fb:80 brd ff:ff:ff:ff:ff:ff 64: link1_1@if63: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 32:d6:de:9f:5d:e2 brd ff:ff:ff:ff:ff:ff link-netns server + ip link set dev link1_1 netns client down name eth0 + ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:fc:ca:49:e2:d4 brd ff:ff:ff:ff:ff:ff 3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 4: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre 0.0.0.0 brd 0.0.0.0 5: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1450 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 8: ip6_vti0@NONE: <NOARP> mtu 1332 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 325b:a7df:c8db:: 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/sit 0.0.0.0 brd 0.0.0.0 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: permaddr 76d3:be76:4187:: 11: ip6gre0@NONE: <NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/gre6 :: brd :: permaddr 569b:65fd:b94b:: 12: enp16s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 9c:6b:00:01:fb:80 brd ff:ff:ff:ff:ff:ff + ip netns exec client ip link add dev bond0 down type bond mode 1 miimon 100 all_slaves_active 1 Hope this helps. I am not sure what is the right thing to do with this test, and whether it is the expected behaviour of the kernel. Best regards, Mirsad

2 years

1
0
0 0

[BUG] selftests: alsa: pcm-test: premature timeout severs the test

by Mirsad Goran Todorovac

Hi, On several platforms, and for some time, I've noticed alsa: pcm-test TIMEOUT. I have tried to increase the timeout in selftests/alsa/settings: timeout=300, so I think there is no more purpose to further increase it, so something appears generally stuck. The test runs up to "default.time4.1.8 section where it hangs for more than 200 seconds, possibly indefinitely. The output of the selftest is: # # default.time3.1.8.0.PLAYBACK - 44.1kHz stereo large periods # # default.time3.1.8.0.PLAYBACK hw_params.RW_INTERLEAVED.S16_LE.44100.2.22496.202464 sw_params.202464 # ok 61 default.time3.0.3.0.PLAYBACK # # default.time4.0.3.0.PLAYBACK - 48kHz stereo small periods # # default.time4.0.3.0.PLAYBACK hw_params.RW_INTERLEAVED.S16_LE.48000.2.512.4096 sw_params.4096 # ok 62 default.time4.0.3.0.PLAYBACK # # default.time5.0.3.0.PLAYBACK - 48kHz stereo large periods # # default.time5.0.3.0.PLAYBACK hw_params.RW_INTERLEAVED.S16_LE.48000.2.24000.192000 sw_params.192000 # ok 63 default.time5.0.3.0.PLAYBACK # # default.time6.0.3.0.PLAYBACK - 48kHz 6 channel large periods # # default.time6.0.3.0.PLAYBACK hw_params.RW_INTERLEAVED.S16_LE.48000.2.48000.576000 sw_params.576000 # ok 64 default.time6.0.3.0.PLAYBACK # # default.time7.0.3.0.PLAYBACK - 96kHz stereo large periods # # default.time7.0.3.0.PLAYBACK hw_params.RW_INTERLEAVED.S16_LE.96000.2.48000.192000 sw_params.192000 # not ok 65 default.time3.1.8.0.PLAYBACK # # time mismatch: expected 4000ms got 17005 # # default.time4.1.8.# not ok 2 selftests: alsa: pcm-test # TIMEOUT 300 seconds The platform is AMD Ryzen 9 assembled box with AsRock mainboard. Config and Lshw attached. CONTINUED: Just to test further, I have increased timeout even further, to 400 seconds. Only then the test passed, but with numerous errors, and this is Ryzen 9, so I guess it can only be worse on hardware like i3 or i5. But many subtests failed, so I am submitting the entire test log (due to mailing list constraints to 100K size of attachments, it is compressed). Best regards, Mirsad -------------- diff -u /dev/null tools/testing/selftests/alsa/settings --- /dev/null 2023-06-11 00:36:30.651447094 +0200 +++ tools/testing/selftests/alsa/settings 2023-06-11 00:37:32.067504069 +0200 @@ -0,0 +1 @@ +timeout=400

2 years

1
0
0 0

[PATCH v2 0/4] tools/nolibc: add two new syscall helpers

by Zhangjin Wu

Willy, Thomas This is the revision of the v1 syscall helpers [1], just rebased it on 20230606-nolibc-rv32+stkp7a of [2]. It doesn't conflict with the -ENOSYS patchset [3], so, it is ok to simply merge both of them. This revision mainly applied your suggestions of v1, both of the syscall return and call helpers are simplified or cleaned up. Changes from v1 -> v2: * tools/nolibc: sys.h: add __syscall() and __sysret() helpers * Use inline function instead of macro for the syscall return helper (Suggestion from Thomas) * Rename syscall return helper from __syscall_ret to __sysret (align with __syscall and it is not that long now) * Make __sysret() be always inline (Suggestion from Willy) * Simplify the whole __syscall() macro to oneline code (Benefit from the fixed 'long' return type of syscalls) * tools/nolibc: unistd.h: apply __sysret() helper * Convert the whole _syscall() macro to oneline code * tools/nolibc: sys.h: apply __sysret() helper * Futher convert both brk() and getpagesize() to oneline code * tools/nolibc: sys.h: apply __syscall() helper * Keep the same as v1, because the __syscall() usage not changed Best regards, Zhangjin --- [1]: https://lore.kernel.org/linux-riscv/cover.1685856497.git.falcon@tinylab.org/ [2]: https://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/nolibc.git [3]: https://lore.kernel.org/linux-riscv/cover.1685780412.git.falcon@tinylab.org/ Zhangjin Wu (4): tools/nolibc: sys.h: add __syscall() and __sysret() helpers tools/nolibc: unistd.h: apply __sysret() helper tools/nolibc: sys.h: apply __sysret() helper tools/nolibc: sys.h: apply __syscall() helper tools/include/nolibc/sys.h | 366 ++++++---------------------------- tools/include/nolibc/unistd.h | 11 +- 2 files changed, 57 insertions(+), 320 deletions(-) -- 2.25.1

2 years

4
17
0 0

Re: [PATCH 6/8] test_sysclt: Test for registering a mount point

by Joel Granados

On Sun, Jun 04, 2023 at 10:41:05PM +0800, kernel test robot wrote: > > > Hello, > > kernel test robot noticed "sysctl_could_not_get_directory" on: > > commit: 1997935e918fa4c07b70be47ef8f37622df427bd ("[PATCH 6/8] test_sysclt: Test for registering a mount point") > url: https://protect2.fireeye.com/v1/url?k=ee66a422-8f1d0eab-ee672f6d-74fe486000… > base: https://git.kernel.org/cgit/linux/kernel/git/mcgrof/linux.git sysctl-next > patch link: https://lore.kernel.org/all/20230602110638.789426-7-j.granados@samsung.com/ > patch subject: [PATCH 6/8] test_sysclt: Test for registering a mount point > > in testcase: boot > > compiler: gcc-12 > test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G > > (please refer to attached dmesg/kmsg for entire log/backtrace) > > > If you fix the issue, kindly add following tag > | Reported-by: kernel test robot <oliver.sang(a)intel.com> > | Closes: https://lore.kernel.org/oe-lkp/202306042234.f2d7beff-oliver.sang@intel.com > > > [ 15.271017][ T1] initcall io_uring_init+0x0/0x40 returned 0 after 87 usecs > [ 15.272122][ T1] calling test_firmware_init+0x0/0x190 @ 1 > [ 15.274422][ T1] test_firmware: interface ready > [ 15.275240][ T1] initcall test_firmware_init+0x0/0x190 returned 0 after 2200 usecs > [ 15.276480][ T1] calling test_sysctl_init+0x0/0x630 @ 1 > [ 15.277687][ T1] sysctl could not get directory: /debug/test_sysctl/mnt/mnt_error -30 This is precisely what I'm trying to test. I'm trying to create a directory on top of a permanently empty directory and expecting the failure and checking to see that the mnt_error directory was not created. @mcgrof: Can we just ignore this 0-day report as a false positive? Best > [ 15.279055][ T1] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.4.0-rc2-00016-g1997935e918f #1 > [ 15.280027][ T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 > [ 15.280027][ T1] Call Trace: > [ 15.280027][ T1] <TASK> > [ 15.280027][ T1] dump_stack_lvl (kbuild/src/consumer/lib/dump_stack.c:107) > [ 15.280027][ T1] __register_sysctl_table (kbuild/src/consumer/fs/proc/proc_sysctl.c:1379) > [ 15.280027][ T1] test_sysctl_init (kbuild/src/consumer/lib/test_sysctl.c:220 kbuild/src/consumer/lib/test_sysctl.c:235) > [ 15.280027][ T1] ? test_firmware_init (kbuild/src/consumer/lib/test_sysctl.c:224) > > > To reproduce: > > # build kernel > cd linux > cp config-6.4.0-rc2-00016-g1997935e918f .config > make HOSTCC=gcc-12 CC=gcc-12 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules > make HOSTCC=gcc-12 CC=gcc-12 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install > cd <mod-install-dir> > find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz > > > git clone https://protect2.fireeye.com/v1/url?k=739e8a44-12e520cd-739f010b-74fe486000… > cd lkp-tests > bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email > > # if come across any failure that blocks the test, > # please remove ~/.lkp and /lkp dir to run from a clean state. > > > > -- > 0-DAY CI Kernel Test Service > https://protect2.fireeye.com/v1/url?k=0a5d5e5e-6b26f4d7-0a5cd511-74fe486000… > > > # > # Automatically generated file; DO NOT EDIT. > # Linux/x86_64 6.4.0-rc2 Kernel Configuration > # > CONFIG_CC_VERSION_TEXT="gcc-12 (Debian 12.2.0-14) 12.2.0" > CONFIG_CC_IS_GCC=y > CONFIG_GCC_VERSION=120200 > CONFIG_CLANG_VERSION=0 > CONFIG_AS_IS_GNU=y > CONFIG_AS_VERSION=24000 > CONFIG_LD_IS_BFD=y > CONFIG_LD_VERSION=24000 > CONFIG_LLD_VERSION=0 > CONFIG_CC_CAN_LINK=y > CONFIG_CC_CAN_LINK_STATIC=y > CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y > CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y > CONFIG_TOOLS_SUPPORT_RELR=y > CONFIG_CC_HAS_ASM_INLINE=y > CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y > CONFIG_PAHOLE_VERSION=125 > CONFIG_CONSTRUCTORS=y > CONFIG_IRQ_WORK=y > CONFIG_BUILDTIME_TABLE_SORT=y > CONFIG_THREAD_INFO_IN_TASK=y > > # > # General setup > # > CONFIG_INIT_ENV_ARG_LIMIT=32 > # CONFIG_COMPILE_TEST is not set > # CONFIG_WERROR is not set > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_BUILD_SALT="" > CONFIG_HAVE_KERNEL_GZIP=y > CONFIG_HAVE_KERNEL_BZIP2=y > CONFIG_HAVE_KERNEL_LZMA=y > CONFIG_HAVE_KERNEL_XZ=y > CONFIG_HAVE_KERNEL_LZO=y > CONFIG_HAVE_KERNEL_LZ4=y > CONFIG_HAVE_KERNEL_ZSTD=y > CONFIG_KERNEL_GZIP=y > # CONFIG_KERNEL_BZIP2 is not set > # CONFIG_KERNEL_LZMA is not set > # CONFIG_KERNEL_XZ is not set > # CONFIG_KERNEL_LZO is not set > # CONFIG_KERNEL_LZ4 is not set > # CONFIG_KERNEL_ZSTD is not set > CONFIG_DEFAULT_INIT="" > CONFIG_DEFAULT_HOSTNAME="(none)" > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > CONFIG_SYSVIPC_COMPAT=y > CONFIG_POSIX_MQUEUE=y > CONFIG_POSIX_MQUEUE_SYSCTL=y > # CONFIG_WATCH_QUEUE is not set > CONFIG_CROSS_MEMORY_ATTACH=y > # CONFIG_USELIB is not set > CONFIG_AUDIT=y > CONFIG_HAVE_ARCH_AUDITSYSCALL=y > CONFIG_AUDITSYSCALL=y > > # > # IRQ subsystem > # > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_GENERIC_IRQ_SHOW=y > CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y > CONFIG_GENERIC_PENDING_IRQ=y > CONFIG_GENERIC_IRQ_MIGRATION=y > CONFIG_GENERIC_IRQ_INJECTION=y > CONFIG_HARDIRQS_SW_RESEND=y > CONFIG_IRQ_DOMAIN=y > CONFIG_IRQ_SIM=y > CONFIG_IRQ_DOMAIN_HIERARCHY=y > CONFIG_GENERIC_MSI_IRQ=y > CONFIG_IRQ_MSI_IOMMU=y > CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y > CONFIG_GENERIC_IRQ_RESERVATION_MODE=y > CONFIG_IRQ_FORCED_THREADING=y > CONFIG_SPARSE_IRQ=y > # CONFIG_GENERIC_IRQ_DEBUGFS is not set > # end of IRQ subsystem > > CONFIG_CLOCKSOURCE_WATCHDOG=y > CONFIG_ARCH_CLOCKSOURCE_INIT=y > CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y > CONFIG_GENERIC_TIME_VSYSCALL=y > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y > CONFIG_GENERIC_CMOS_UPDATE=y > CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y > CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y > CONFIG_CONTEXT_TRACKING=y > CONFIG_CONTEXT_TRACKING_IDLE=y > > # > # Timers subsystem > # > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ_COMMON=y > # CONFIG_HZ_PERIODIC is not set > # CONFIG_NO_HZ_IDLE is not set > CONFIG_NO_HZ_FULL=y > CONFIG_CONTEXT_TRACKING_USER=y > # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=125 > # end of Timers subsystem > > CONFIG_BPF=y > CONFIG_HAVE_EBPF_JIT=y > CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y > > # > # BPF subsystem > # > CONFIG_BPF_SYSCALL=y > CONFIG_BPF_JIT=y > CONFIG_BPF_JIT_ALWAYS_ON=y > CONFIG_BPF_JIT_DEFAULT_ON=y > CONFIG_BPF_UNPRIV_DEFAULT_OFF=y > # CONFIG_BPF_PRELOAD is not set > # CONFIG_BPF_LSM is not set > # end of BPF subsystem > > CONFIG_PREEMPT_BUILD=y > # CONFIG_PREEMPT_NONE is not set > CONFIG_PREEMPT_VOLUNTARY=y > # CONFIG_PREEMPT is not set > CONFIG_PREEMPT_COUNT=y > CONFIG_PREEMPTION=y > CONFIG_PREEMPT_DYNAMIC=y > # CONFIG_SCHED_CORE is not set > > # > # CPU/Task time and stats accounting > # > CONFIG_VIRT_CPU_ACCOUNTING=y > CONFIG_VIRT_CPU_ACCOUNTING_GEN=y > CONFIG_IRQ_TIME_ACCOUNTING=y > CONFIG_HAVE_SCHED_AVG_IRQ=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_BSD_PROCESS_ACCT_V3=y > CONFIG_TASKSTATS=y > CONFIG_TASK_DELAY_ACCT=y > CONFIG_TASK_XACCT=y > CONFIG_TASK_IO_ACCOUNTING=y > # CONFIG_PSI is not set > # end of CPU/Task time and stats accounting > > CONFIG_CPU_ISOLATION=y > > # > # RCU Subsystem > # > CONFIG_TREE_RCU=y > CONFIG_PREEMPT_RCU=y > # CONFIG_RCU_EXPERT is not set > CONFIG_TREE_SRCU=y > CONFIG_TASKS_RCU_GENERIC=y > CONFIG_TASKS_RCU=y > CONFIG_TASKS_RUDE_RCU=y > CONFIG_TASKS_TRACE_RCU=y > CONFIG_RCU_STALL_COMMON=y > CONFIG_RCU_NEED_SEGCBLIST=y > CONFIG_RCU_NOCB_CPU=y > # CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set > # CONFIG_RCU_LAZY is not set > # end of RCU Subsystem > > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > # CONFIG_IKHEADERS is not set > CONFIG_LOG_BUF_SHIFT=20 > CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 > # CONFIG_PRINTK_INDEX is not set > CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y > > # > # Scheduler features > # > # CONFIG_UCLAMP_TASK is not set > # end of Scheduler features > > CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y > CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y > CONFIG_CC_HAS_INT128=y > CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" > CONFIG_GCC11_NO_ARRAY_BOUNDS=y > CONFIG_CC_NO_ARRAY_BOUNDS=y > CONFIG_ARCH_SUPPORTS_INT128=y > CONFIG_NUMA_BALANCING=y > CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y > CONFIG_CGROUPS=y > CONFIG_PAGE_COUNTER=y > # CONFIG_CGROUP_FAVOR_DYNMODS is not set > CONFIG_MEMCG=y > CONFIG_MEMCG_KMEM=y > CONFIG_BLK_CGROUP=y > CONFIG_CGROUP_WRITEBACK=y > CONFIG_CGROUP_SCHED=y > CONFIG_FAIR_GROUP_SCHED=y > CONFIG_CFS_BANDWIDTH=y > CONFIG_RT_GROUP_SCHED=y > CONFIG_SCHED_MM_CID=y > CONFIG_CGROUP_PIDS=y > CONFIG_CGROUP_RDMA=y > CONFIG_CGROUP_FREEZER=y > CONFIG_CGROUP_HUGETLB=y > CONFIG_CPUSETS=y > CONFIG_PROC_PID_CPUSET=y > CONFIG_CGROUP_DEVICE=y > CONFIG_CGROUP_CPUACCT=y > CONFIG_CGROUP_PERF=y > CONFIG_CGROUP_BPF=y > # CONFIG_CGROUP_MISC is not set > # CONFIG_CGROUP_DEBUG is not set > CONFIG_SOCK_CGROUP_DATA=y > CONFIG_NAMESPACES=y > CONFIG_UTS_NS=y > CONFIG_TIME_NS=y > CONFIG_IPC_NS=y > CONFIG_USER_NS=y > CONFIG_PID_NS=y > CONFIG_NET_NS=y > CONFIG_CHECKPOINT_RESTORE=y > CONFIG_SCHED_AUTOGROUP=y > CONFIG_RELAY=y > CONFIG_BLK_DEV_INITRD=y > CONFIG_INITRAMFS_SOURCE="" > CONFIG_RD_GZIP=y > CONFIG_RD_BZIP2=y > CONFIG_RD_LZMA=y > CONFIG_RD_XZ=y > CONFIG_RD_LZO=y > CONFIG_RD_LZ4=y > CONFIG_RD_ZSTD=y > # CONFIG_BOOT_CONFIG is not set > CONFIG_INITRAMFS_PRESERVE_MTIME=y > CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y > # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set > CONFIG_LD_ORPHAN_WARN=y > CONFIG_LD_ORPHAN_WARN_LEVEL="warn" > CONFIG_SYSCTL=y > CONFIG_HAVE_UID16=y > CONFIG_SYSCTL_EXCEPTION_TRACE=y > CONFIG_HAVE_PCSPKR_PLATFORM=y > CONFIG_EXPERT=y > CONFIG_UID16=y > CONFIG_MULTIUSER=y > CONFIG_SGETMASK_SYSCALL=y > CONFIG_SYSFS_SYSCALL=y > CONFIG_FHANDLE=y > CONFIG_POSIX_TIMERS=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_PCSPKR_PLATFORM=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_FUTEX_PI=y > CONFIG_EPOLL=y > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_AIO=y > CONFIG_IO_URING=y > CONFIG_ADVISE_SYSCALLS=y > CONFIG_MEMBARRIER=y > CONFIG_KALLSYMS=y > # CONFIG_KALLSYMS_SELFTEST is not set > CONFIG_KALLSYMS_ALL=y > CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y > CONFIG_KALLSYMS_BASE_RELATIVE=y > CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y > CONFIG_KCMP=y > CONFIG_RSEQ=y > # CONFIG_DEBUG_RSEQ is not set > CONFIG_EMBEDDED=y > CONFIG_HAVE_PERF_EVENTS=y > CONFIG_GUEST_PERF_EVENTS=y > # CONFIG_PC104 is not set > > # > # Kernel Performance Events And Counters > # > CONFIG_PERF_EVENTS=y > # CONFIG_DEBUG_PERF_USE_VMALLOC is not set > # end of Kernel Performance Events And Counters > > CONFIG_SYSTEM_DATA_VERIFICATION=y > CONFIG_PROFILING=y > CONFIG_TRACEPOINTS=y > # end of General setup > > CONFIG_64BIT=y > CONFIG_X86_64=y > CONFIG_X86=y > CONFIG_INSTRUCTION_DECODER=y > CONFIG_OUTPUT_FORMAT="elf64-x86-64" > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_MMU=y > CONFIG_ARCH_MMAP_RND_BITS_MIN=28 > CONFIG_ARCH_MMAP_RND_BITS_MAX=32 > CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 > CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 > CONFIG_GENERIC_ISA_DMA=y > CONFIG_GENERIC_CSUM=y > CONFIG_GENERIC_BUG=y > CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y > CONFIG_ARCH_MAY_HAVE_PC_FDC=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_ARCH_HAS_CPU_RELAX=y > CONFIG_ARCH_HIBERNATION_POSSIBLE=y > CONFIG_ARCH_SUSPEND_POSSIBLE=y > CONFIG_AUDIT_ARCH=y > CONFIG_KASAN_SHADOW_OFFSET=0xdffffc0000000000 > CONFIG_HAVE_INTEL_TXT=y > CONFIG_X86_64_SMP=y > CONFIG_ARCH_SUPPORTS_UPROBES=y > CONFIG_FIX_EARLYCON_MEM=y > CONFIG_DYNAMIC_PHYSICAL_MASK=y > CONFIG_PGTABLE_LEVELS=5 > CONFIG_CC_HAS_SANE_STACKPROTECTOR=y > > # > # Processor type and features > # > CONFIG_SMP=y > CONFIG_X86_FEATURE_NAMES=y > CONFIG_X86_X2APIC=y > CONFIG_X86_MPPARSE=y > # CONFIG_GOLDFISH is not set > CONFIG_X86_CPU_RESCTRL=y > CONFIG_X86_EXTENDED_PLATFORM=y > # CONFIG_X86_NUMACHIP is not set > # CONFIG_X86_VSMP is not set > CONFIG_X86_UV=y > # CONFIG_X86_GOLDFISH is not set > # CONFIG_X86_INTEL_MID is not set > CONFIG_X86_INTEL_LPSS=y > # CONFIG_X86_AMD_PLATFORM_DEVICE is not set > CONFIG_IOSF_MBI=y > # CONFIG_IOSF_MBI_DEBUG is not set > CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y > # CONFIG_SCHED_OMIT_FRAME_POINTER is not set > CONFIG_HYPERVISOR_GUEST=y > CONFIG_PARAVIRT=y > # CONFIG_PARAVIRT_DEBUG is not set > CONFIG_PARAVIRT_SPINLOCKS=y > CONFIG_X86_HV_CALLBACK_VECTOR=y > # CONFIG_XEN is not set > CONFIG_KVM_GUEST=y > CONFIG_ARCH_CPUIDLE_HALTPOLL=y > # CONFIG_PVH is not set > CONFIG_PARAVIRT_TIME_ACCOUNTING=y > CONFIG_PARAVIRT_CLOCK=y > # CONFIG_JAILHOUSE_GUEST is not set > # CONFIG_ACRN_GUEST is not set > CONFIG_INTEL_TDX_GUEST=y > # CONFIG_MK8 is not set > # CONFIG_MPSC is not set > # CONFIG_MCORE2 is not set > # CONFIG_MATOM is not set > CONFIG_GENERIC_CPU=y > CONFIG_X86_INTERNODE_CACHE_SHIFT=6 > CONFIG_X86_L1_CACHE_SHIFT=6 > CONFIG_X86_TSC=y > CONFIG_X86_CMPXCHG64=y > CONFIG_X86_CMOV=y > CONFIG_X86_MINIMUM_CPU_FAMILY=64 > CONFIG_X86_DEBUGCTLMSR=y > CONFIG_IA32_FEAT_CTL=y > CONFIG_X86_VMX_FEATURE_NAMES=y > CONFIG_PROCESSOR_SELECT=y > CONFIG_CPU_SUP_INTEL=y > # CONFIG_CPU_SUP_AMD is not set > # CONFIG_CPU_SUP_HYGON is not set > # CONFIG_CPU_SUP_CENTAUR is not set > # CONFIG_CPU_SUP_ZHAOXIN is not set > CONFIG_HPET_TIMER=y > CONFIG_HPET_EMULATE_RTC=y > CONFIG_DMI=y > CONFIG_BOOT_VESA_SUPPORT=y > CONFIG_MAXSMP=y > CONFIG_NR_CPUS_RANGE_BEGIN=8192 > CONFIG_NR_CPUS_RANGE_END=8192 > CONFIG_NR_CPUS_DEFAULT=8192 > CONFIG_NR_CPUS=8192 > CONFIG_SCHED_CLUSTER=y > CONFIG_SCHED_SMT=y > CONFIG_SCHED_MC=y > CONFIG_SCHED_MC_PRIO=y > CONFIG_X86_LOCAL_APIC=y > CONFIG_X86_IO_APIC=y > CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y > CONFIG_X86_MCE=y > CONFIG_X86_MCELOG_LEGACY=y > CONFIG_X86_MCE_INTEL=y > CONFIG_X86_MCE_THRESHOLD=y > CONFIG_X86_MCE_INJECT=m > > # > # Performance monitoring > # > CONFIG_PERF_EVENTS_INTEL_UNCORE=m > CONFIG_PERF_EVENTS_INTEL_RAPL=m > CONFIG_PERF_EVENTS_INTEL_CSTATE=m > # end of Performance monitoring > > CONFIG_X86_16BIT=y > CONFIG_X86_ESPFIX64=y > CONFIG_X86_VSYSCALL_EMULATION=y > CONFIG_X86_IOPL_IOPERM=y > CONFIG_MICROCODE=y > CONFIG_MICROCODE_INTEL=y > CONFIG_MICROCODE_LATE_LOADING=y > CONFIG_X86_MSR=y > CONFIG_X86_CPUID=y > CONFIG_X86_5LEVEL=y > CONFIG_X86_DIRECT_GBPAGES=y > # CONFIG_X86_CPA_STATISTICS is not set > CONFIG_X86_MEM_ENCRYPT=y > CONFIG_NUMA=y > # CONFIG_AMD_NUMA is not set > CONFIG_X86_64_ACPI_NUMA=y > CONFIG_NUMA_EMU=y > CONFIG_NODES_SHIFT=10 > CONFIG_ARCH_SPARSEMEM_ENABLE=y > CONFIG_ARCH_SPARSEMEM_DEFAULT=y > # CONFIG_ARCH_MEMORY_PROBE is not set > CONFIG_ARCH_PROC_KCORE_TEXT=y > CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 > CONFIG_X86_PMEM_LEGACY_DEVICE=y > CONFIG_X86_PMEM_LEGACY=m > CONFIG_X86_CHECK_BIOS_CORRUPTION=y > # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set > CONFIG_MTRR=y > CONFIG_MTRR_SANITIZER=y > CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 > CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 > CONFIG_X86_PAT=y > CONFIG_ARCH_USES_PG_UNCACHED=y > CONFIG_X86_UMIP=y > CONFIG_CC_HAS_IBT=y > CONFIG_X86_KERNEL_IBT=y > CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y > CONFIG_X86_INTEL_TSX_MODE_OFF=y > # CONFIG_X86_INTEL_TSX_MODE_ON is not set > # CONFIG_X86_INTEL_TSX_MODE_AUTO is not set > CONFIG_X86_SGX=y > CONFIG_EFI=y > CONFIG_EFI_STUB=y > CONFIG_EFI_HANDOVER_PROTOCOL=y > CONFIG_EFI_MIXED=y > # CONFIG_EFI_FAKE_MEMMAP is not set > CONFIG_EFI_RUNTIME_MAP=y > # CONFIG_HZ_100 is not set > # CONFIG_HZ_250 is not set > # CONFIG_HZ_300 is not set > CONFIG_HZ_1000=y > CONFIG_HZ=1000 > CONFIG_SCHED_HRTICK=y > CONFIG_KEXEC=y > CONFIG_KEXEC_FILE=y > CONFIG_ARCH_HAS_KEXEC_PURGATORY=y > # CONFIG_KEXEC_SIG is not set > CONFIG_CRASH_DUMP=y > CONFIG_KEXEC_JUMP=y > CONFIG_PHYSICAL_START=0x1000000 > CONFIG_RELOCATABLE=y > CONFIG_RANDOMIZE_BASE=y > CONFIG_X86_NEED_RELOCS=y > CONFIG_PHYSICAL_ALIGN=0x200000 > CONFIG_DYNAMIC_MEMORY_LAYOUT=y > CONFIG_RANDOMIZE_MEMORY=y > CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa > # CONFIG_ADDRESS_MASKING is not set > CONFIG_HOTPLUG_CPU=y > CONFIG_BOOTPARAM_HOTPLUG_CPU0=y > # CONFIG_DEBUG_HOTPLUG_CPU0 is not set > # CONFIG_COMPAT_VDSO is not set > CONFIG_LEGACY_VSYSCALL_XONLY=y > # CONFIG_LEGACY_VSYSCALL_NONE is not set > # CONFIG_CMDLINE_BOOL is not set > CONFIG_MODIFY_LDT_SYSCALL=y > # CONFIG_STRICT_SIGALTSTACK_SIZE is not set > CONFIG_HAVE_LIVEPATCH=y > CONFIG_LIVEPATCH=y > # end of Processor type and features > > CONFIG_CC_HAS_SLS=y > CONFIG_CC_HAS_RETURN_THUNK=y > CONFIG_CC_HAS_ENTRY_PADDING=y > CONFIG_FUNCTION_PADDING_CFI=11 > CONFIG_FUNCTION_PADDING_BYTES=16 > CONFIG_SPECULATION_MITIGATIONS=y > CONFIG_PAGE_TABLE_ISOLATION=y > # CONFIG_RETPOLINE is not set > CONFIG_CPU_IBRS_ENTRY=y > # CONFIG_SLS is not set > CONFIG_ARCH_HAS_ADD_PAGES=y > CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y > > # > # Power management and ACPI options > # > CONFIG_ARCH_HIBERNATION_HEADER=y > CONFIG_SUSPEND=y > CONFIG_SUSPEND_FREEZER=y > # CONFIG_SUSPEND_SKIP_SYNC is not set > CONFIG_HIBERNATE_CALLBACKS=y > CONFIG_HIBERNATION=y > CONFIG_HIBERNATION_SNAPSHOT_DEV=y > CONFIG_PM_STD_PARTITION="" > CONFIG_PM_SLEEP=y > CONFIG_PM_SLEEP_SMP=y > # CONFIG_PM_AUTOSLEEP is not set > # CONFIG_PM_USERSPACE_AUTOSLEEP is not set > # CONFIG_PM_WAKELOCKS is not set > CONFIG_PM=y > CONFIG_PM_DEBUG=y > # CONFIG_PM_ADVANCED_DEBUG is not set > # CONFIG_PM_TEST_SUSPEND is not set > CONFIG_PM_SLEEP_DEBUG=y > # CONFIG_DPM_WATCHDOG is not set > # CONFIG_PM_TRACE_RTC is not set > CONFIG_PM_CLK=y > # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set > # CONFIG_ENERGY_MODEL is not set > CONFIG_ARCH_SUPPORTS_ACPI=y > CONFIG_ACPI=y > CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y > CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y > CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y > # CONFIG_ACPI_DEBUGGER is not set > CONFIG_ACPI_SPCR_TABLE=y > # CONFIG_ACPI_FPDT is not set > CONFIG_ACPI_LPIT=y > CONFIG_ACPI_SLEEP=y > CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y > CONFIG_ACPI_EC_DEBUGFS=m > CONFIG_ACPI_AC=y > CONFIG_ACPI_BATTERY=y > CONFIG_ACPI_BUTTON=y > CONFIG_ACPI_VIDEO=m > CONFIG_ACPI_FAN=y > CONFIG_ACPI_TAD=m > CONFIG_ACPI_DOCK=y > CONFIG_ACPI_CPU_FREQ_PSS=y > CONFIG_ACPI_PROCESSOR_CSTATE=y > CONFIG_ACPI_PROCESSOR_IDLE=y > CONFIG_ACPI_CPPC_LIB=y > CONFIG_ACPI_PROCESSOR=y > CONFIG_ACPI_IPMI=m > CONFIG_ACPI_HOTPLUG_CPU=y > CONFIG_ACPI_PROCESSOR_AGGREGATOR=m > CONFIG_ACPI_THERMAL=y > CONFIG_ACPI_PLATFORM_PROFILE=m > CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y > CONFIG_ACPI_TABLE_UPGRADE=y > # CONFIG_ACPI_DEBUG is not set > CONFIG_ACPI_PCI_SLOT=y > CONFIG_ACPI_CONTAINER=y > CONFIG_ACPI_HOTPLUG_MEMORY=y > CONFIG_ACPI_HOTPLUG_IOAPIC=y > CONFIG_ACPI_SBS=m > CONFIG_ACPI_HED=y > # CONFIG_ACPI_CUSTOM_METHOD is not set > CONFIG_ACPI_BGRT=y > # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set > CONFIG_ACPI_NFIT=m > # CONFIG_NFIT_SECURITY_DEBUG is not set > CONFIG_ACPI_NUMA=y > CONFIG_ACPI_HMAT=y > CONFIG_HAVE_ACPI_APEI=y > CONFIG_HAVE_ACPI_APEI_NMI=y > CONFIG_ACPI_APEI=y > CONFIG_ACPI_APEI_GHES=y > CONFIG_ACPI_APEI_PCIEAER=y > CONFIG_ACPI_APEI_MEMORY_FAILURE=y > CONFIG_ACPI_APEI_EINJ=m > # CONFIG_ACPI_APEI_ERST_DEBUG is not set > # CONFIG_ACPI_DPTF is not set > CONFIG_ACPI_WATCHDOG=y > CONFIG_ACPI_EXTLOG=m > CONFIG_ACPI_ADXL=y > # CONFIG_ACPI_CONFIGFS is not set > # CONFIG_ACPI_PFRUT is not set > CONFIG_ACPI_PCC=y > # CONFIG_ACPI_FFH is not set > # CONFIG_PMIC_OPREGION is not set > CONFIG_ACPI_PRMT=y > CONFIG_X86_PM_TIMER=y > > # > # CPU Frequency scaling > # > CONFIG_CPU_FREQ=y > CONFIG_CPU_FREQ_GOV_ATTR_SET=y > CONFIG_CPU_FREQ_GOV_COMMON=y > CONFIG_CPU_FREQ_STAT=y > CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y > # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set > # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set > CONFIG_CPU_FREQ_GOV_PERFORMANCE=y > CONFIG_CPU_FREQ_GOV_POWERSAVE=y > CONFIG_CPU_FREQ_GOV_USERSPACE=y > CONFIG_CPU_FREQ_GOV_ONDEMAND=y > CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y > CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y > > # > # CPU frequency scaling drivers > # > CONFIG_X86_INTEL_PSTATE=y > # CONFIG_X86_PCC_CPUFREQ is not set > # CONFIG_X86_AMD_PSTATE is not set > # CONFIG_X86_AMD_PSTATE_UT is not set > CONFIG_X86_ACPI_CPUFREQ=m > # CONFIG_X86_POWERNOW_K8 is not set > # CONFIG_X86_SPEEDSTEP_CENTRINO is not set > CONFIG_X86_P4_CLOCKMOD=m > > # > # shared options > # > CONFIG_X86_SPEEDSTEP_LIB=m > # end of CPU Frequency scaling > > # > # CPU Idle > # > CONFIG_CPU_IDLE=y > # CONFIG_CPU_IDLE_GOV_LADDER is not set > CONFIG_CPU_IDLE_GOV_MENU=y > # CONFIG_CPU_IDLE_GOV_TEO is not set > CONFIG_CPU_IDLE_GOV_HALTPOLL=y > CONFIG_HALTPOLL_CPUIDLE=y > # end of CPU Idle > > CONFIG_INTEL_IDLE=y > # end of Power management and ACPI options > > # > # Bus options (PCI etc.) > # > CONFIG_PCI_DIRECT=y > CONFIG_PCI_MMCONFIG=y > CONFIG_MMCONF_FAM10H=y > # CONFIG_PCI_CNB20LE_QUIRK is not set > # CONFIG_ISA_BUS is not set > CONFIG_ISA_DMA_API=y > # end of Bus options (PCI etc.) > > # > # Binary Emulations > # > CONFIG_IA32_EMULATION=y > # CONFIG_X86_X32_ABI is not set > CONFIG_COMPAT_32=y > CONFIG_COMPAT=y > CONFIG_COMPAT_FOR_U64_ALIGNMENT=y > # end of Binary Emulations > > CONFIG_HAVE_KVM=y > CONFIG_HAVE_KVM_PFNCACHE=y > CONFIG_HAVE_KVM_IRQCHIP=y > CONFIG_HAVE_KVM_IRQFD=y > CONFIG_HAVE_KVM_IRQ_ROUTING=y > CONFIG_HAVE_KVM_DIRTY_RING=y > CONFIG_HAVE_KVM_DIRTY_RING_TSO=y > CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y > CONFIG_HAVE_KVM_EVENTFD=y > CONFIG_KVM_MMIO=y > CONFIG_KVM_ASYNC_PF=y > CONFIG_HAVE_KVM_MSI=y > CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y > CONFIG_KVM_VFIO=y > CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y > CONFIG_KVM_COMPAT=y > CONFIG_HAVE_KVM_IRQ_BYPASS=y > CONFIG_HAVE_KVM_NO_POLL=y > CONFIG_KVM_XFER_TO_GUEST_WORK=y > CONFIG_HAVE_KVM_PM_NOTIFIER=y > CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y > CONFIG_VIRTUALIZATION=y > CONFIG_KVM=m > # CONFIG_KVM_WERROR is not set > CONFIG_KVM_INTEL=m > # CONFIG_X86_SGX_KVM is not set > # CONFIG_KVM_AMD is not set > CONFIG_KVM_SMM=y > # CONFIG_KVM_XEN is not set > CONFIG_AS_AVX512=y > CONFIG_AS_SHA1_NI=y > CONFIG_AS_SHA256_NI=y > CONFIG_AS_TPAUSE=y > CONFIG_AS_GFNI=y > > # > # General architecture-dependent options > # > CONFIG_CRASH_CORE=y > CONFIG_KEXEC_CORE=y > CONFIG_HAVE_IMA_KEXEC=y > CONFIG_HOTPLUG_SMT=y > CONFIG_GENERIC_ENTRY=y > CONFIG_KPROBES=y > CONFIG_JUMP_LABEL=y > # CONFIG_STATIC_KEYS_SELFTEST is not set > # CONFIG_STATIC_CALL_SELFTEST is not set > CONFIG_OPTPROBES=y > CONFIG_KPROBES_ON_FTRACE=y > CONFIG_UPROBES=y > CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y > CONFIG_ARCH_USE_BUILTIN_BSWAP=y > CONFIG_KRETPROBES=y > CONFIG_KRETPROBE_ON_RETHOOK=y > CONFIG_USER_RETURN_NOTIFIER=y > CONFIG_HAVE_IOREMAP_PROT=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_HAVE_OPTPROBES=y > CONFIG_HAVE_KPROBES_ON_FTRACE=y > CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y > CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y > CONFIG_HAVE_NMI=y > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y > CONFIG_HAVE_ARCH_TRACEHOOK=y > CONFIG_HAVE_DMA_CONTIGUOUS=y > CONFIG_GENERIC_SMP_IDLE_THREAD=y > CONFIG_ARCH_HAS_FORTIFY_SOURCE=y > CONFIG_ARCH_HAS_SET_MEMORY=y > CONFIG_ARCH_HAS_SET_DIRECT_MAP=y > CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y > CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y > CONFIG_ARCH_WANTS_NO_INSTR=y > CONFIG_HAVE_ASM_MODVERSIONS=y > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > CONFIG_HAVE_RSEQ=y > CONFIG_HAVE_RUST=y > CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y > CONFIG_HAVE_HW_BREAKPOINT=y > CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y > CONFIG_HAVE_USER_RETURN_NOTIFIER=y > CONFIG_HAVE_PERF_EVENTS_NMI=y > CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y > CONFIG_HAVE_PERF_REGS=y > CONFIG_HAVE_PERF_USER_STACK_DUMP=y > CONFIG_HAVE_ARCH_JUMP_LABEL=y > CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y > CONFIG_MMU_GATHER_TABLE_FREE=y > CONFIG_MMU_GATHER_RCU_TABLE_FREE=y > CONFIG_MMU_GATHER_MERGE_VMAS=y > CONFIG_MMU_LAZY_TLB_REFCOUNT=y > CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y > CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y > CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y > CONFIG_HAVE_CMPXCHG_LOCAL=y > CONFIG_HAVE_CMPXCHG_DOUBLE=y > CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y > CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y > CONFIG_HAVE_ARCH_SECCOMP=y > CONFIG_HAVE_ARCH_SECCOMP_FILTER=y > CONFIG_SECCOMP=y > CONFIG_SECCOMP_FILTER=y > # CONFIG_SECCOMP_CACHE_DEBUG is not set > CONFIG_HAVE_ARCH_STACKLEAK=y > CONFIG_HAVE_STACKPROTECTOR=y > CONFIG_STACKPROTECTOR=y > CONFIG_STACKPROTECTOR_STRONG=y > CONFIG_ARCH_SUPPORTS_LTO_CLANG=y > CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y > CONFIG_LTO_NONE=y > CONFIG_ARCH_SUPPORTS_CFI_CLANG=y > CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y > CONFIG_HAVE_CONTEXT_TRACKING_USER=y > CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y > CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y > CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y > CONFIG_HAVE_MOVE_PUD=y > CONFIG_HAVE_MOVE_PMD=y > CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y > CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y > CONFIG_HAVE_ARCH_HUGE_VMAP=y > CONFIG_HAVE_ARCH_HUGE_VMALLOC=y > CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y > CONFIG_HAVE_ARCH_SOFT_DIRTY=y > CONFIG_HAVE_MOD_ARCH_SPECIFIC=y > CONFIG_MODULES_USE_ELF_RELA=y > CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y > CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y > CONFIG_SOFTIRQ_ON_OWN_STACK=y > CONFIG_ARCH_HAS_ELF_RANDOMIZE=y > CONFIG_HAVE_ARCH_MMAP_RND_BITS=y > CONFIG_HAVE_EXIT_THREAD=y > CONFIG_ARCH_MMAP_RND_BITS=28 > CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y > CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 > CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y > CONFIG_PAGE_SIZE_LESS_THAN_64KB=y > CONFIG_PAGE_SIZE_LESS_THAN_256KB=y > CONFIG_HAVE_OBJTOOL=y > CONFIG_HAVE_JUMP_LABEL_HACK=y > CONFIG_HAVE_NOINSTR_HACK=y > CONFIG_HAVE_NOINSTR_VALIDATION=y > CONFIG_HAVE_UACCESS_VALIDATION=y > CONFIG_HAVE_STACK_VALIDATION=y > CONFIG_HAVE_RELIABLE_STACKTRACE=y > CONFIG_OLD_SIGSUSPEND3=y > CONFIG_COMPAT_OLD_SIGACTION=y > CONFIG_COMPAT_32BIT_TIME=y > CONFIG_HAVE_ARCH_VMAP_STACK=y > CONFIG_VMAP_STACK=y > CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y > CONFIG_RANDOMIZE_KSTACK_OFFSET=y > CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y > CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y > CONFIG_STRICT_KERNEL_RWX=y > CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y > CONFIG_STRICT_MODULE_RWX=y > CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y > CONFIG_ARCH_USE_MEMREMAP_PROT=y > # CONFIG_LOCK_EVENT_COUNTS is not set > CONFIG_ARCH_HAS_MEM_ENCRYPT=y > CONFIG_ARCH_HAS_CC_PLATFORM=y > CONFIG_HAVE_STATIC_CALL=y > CONFIG_HAVE_STATIC_CALL_INLINE=y > CONFIG_HAVE_PREEMPT_DYNAMIC=y > CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y > CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y > CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y > CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y > CONFIG_ARCH_HAS_ELFCORE_COMPAT=y > CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y > CONFIG_DYNAMIC_SIGFRAME=y > CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y > CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y > > # > # GCOV-based kernel profiling > # > # CONFIG_GCOV_KERNEL is not set > CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y > # end of GCOV-based kernel profiling > > CONFIG_HAVE_GCC_PLUGINS=y > CONFIG_GCC_PLUGINS=y > # CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set > CONFIG_FUNCTION_ALIGNMENT_4B=y > CONFIG_FUNCTION_ALIGNMENT_16B=y > CONFIG_FUNCTION_ALIGNMENT=16 > # end of General architecture-dependent options > > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULE_SIG_FORMAT=y > CONFIG_MODULES=y > # CONFIG_MODULE_DEBUG is not set > CONFIG_MODULE_FORCE_LOAD=y > CONFIG_MODULE_UNLOAD=y > # CONFIG_MODULE_FORCE_UNLOAD is not set > # CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set > # CONFIG_MODVERSIONS is not set > # CONFIG_MODULE_SRCVERSION_ALL is not set > CONFIG_MODULE_SIG=y > # CONFIG_MODULE_SIG_FORCE is not set > CONFIG_MODULE_SIG_ALL=y > # CONFIG_MODULE_SIG_SHA1 is not set > # CONFIG_MODULE_SIG_SHA224 is not set > CONFIG_MODULE_SIG_SHA256=y > # CONFIG_MODULE_SIG_SHA384 is not set > # CONFIG_MODULE_SIG_SHA512 is not set > CONFIG_MODULE_SIG_HASH="sha256" > CONFIG_MODULE_COMPRESS_NONE=y > # CONFIG_MODULE_COMPRESS_GZIP is not set > # CONFIG_MODULE_COMPRESS_XZ is not set > # CONFIG_MODULE_COMPRESS_ZSTD is not set > # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set > CONFIG_MODPROBE_PATH="/sbin/modprobe" > # CONFIG_TRIM_UNUSED_KSYMS is not set > CONFIG_MODULES_TREE_LOOKUP=y > CONFIG_BLOCK=y > CONFIG_BLOCK_LEGACY_AUTOLOAD=y > CONFIG_BLK_CGROUP_RWSTAT=y > CONFIG_BLK_CGROUP_PUNT_BIO=y > CONFIG_BLK_DEV_BSG_COMMON=y > CONFIG_BLK_ICQ=y > CONFIG_BLK_DEV_BSGLIB=y > CONFIG_BLK_DEV_INTEGRITY=y > CONFIG_BLK_DEV_INTEGRITY_T10=m > # CONFIG_BLK_DEV_ZONED is not set > CONFIG_BLK_DEV_THROTTLING=y > # CONFIG_BLK_DEV_THROTTLING_LOW is not set > CONFIG_BLK_WBT=y > CONFIG_BLK_WBT_MQ=y > # CONFIG_BLK_CGROUP_IOLATENCY is not set > # CONFIG_BLK_CGROUP_IOCOST is not set > # CONFIG_BLK_CGROUP_IOPRIO is not set > CONFIG_BLK_DEBUG_FS=y > # CONFIG_BLK_SED_OPAL is not set > # CONFIG_BLK_INLINE_ENCRYPTION is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_EFI_PARTITION=y > # end of Partition Types > > CONFIG_BLK_MQ_PCI=y > CONFIG_BLK_MQ_VIRTIO=y > CONFIG_BLK_PM=y > CONFIG_BLOCK_HOLDER_DEPRECATED=y > CONFIG_BLK_MQ_STACKING=y > > # > # IO Schedulers > # > CONFIG_MQ_IOSCHED_DEADLINE=y > CONFIG_MQ_IOSCHED_KYBER=y > CONFIG_IOSCHED_BFQ=y > CONFIG_BFQ_GROUP_IOSCHED=y > # CONFIG_BFQ_CGROUP_DEBUG is not set > # end of IO Schedulers > > CONFIG_PREEMPT_NOTIFIERS=y > CONFIG_PADATA=y > CONFIG_ASN1=y > CONFIG_UNINLINE_SPIN_UNLOCK=y > CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y > CONFIG_MUTEX_SPIN_ON_OWNER=y > CONFIG_RWSEM_SPIN_ON_OWNER=y > CONFIG_LOCK_SPIN_ON_OWNER=y > CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y > CONFIG_QUEUED_SPINLOCKS=y > CONFIG_ARCH_USE_QUEUED_RWLOCKS=y > CONFIG_QUEUED_RWLOCKS=y > CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y > CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y > CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y > CONFIG_FREEZER=y > > # > # Executable file formats > # > CONFIG_BINFMT_ELF=y > CONFIG_COMPAT_BINFMT_ELF=y > CONFIG_ELFCORE=y > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > CONFIG_BINFMT_SCRIPT=y > CONFIG_BINFMT_MISC=m > CONFIG_COREDUMP=y > # end of Executable file formats > > # > # Memory Management options > # > CONFIG_ZPOOL=y > CONFIG_SWAP=y > CONFIG_ZSWAP=y > # CONFIG_ZSWAP_DEFAULT_ON is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set > CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set > # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set > CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" > CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y > # CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set > # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set > CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" > CONFIG_ZBUD=y > # CONFIG_Z3FOLD is not set > CONFIG_ZSMALLOC=y > CONFIG_ZSMALLOC_STAT=y > CONFIG_ZSMALLOC_CHAIN_SIZE=8 > > # > # SLAB allocator options > # > # CONFIG_SLAB is not set > CONFIG_SLUB=y > # CONFIG_SLUB_TINY is not set > CONFIG_SLAB_MERGE_DEFAULT=y > CONFIG_SLAB_FREELIST_RANDOM=y > CONFIG_SLAB_FREELIST_HARDENED=y > # CONFIG_SLUB_STATS is not set > CONFIG_SLUB_CPU_PARTIAL=y > # end of SLAB allocator options > > CONFIG_SHUFFLE_PAGE_ALLOCATOR=y > # CONFIG_COMPAT_BRK is not set > CONFIG_SPARSEMEM=y > CONFIG_SPARSEMEM_EXTREME=y > CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y > CONFIG_SPARSEMEM_VMEMMAP=y > CONFIG_ARCH_WANT_OPTIMIZE_VMEMMAP=y > CONFIG_HAVE_FAST_GUP=y > CONFIG_NUMA_KEEP_MEMINFO=y > CONFIG_MEMORY_ISOLATION=y > CONFIG_EXCLUSIVE_SYSTEM_RAM=y > CONFIG_HAVE_BOOTMEM_INFO_NODE=y > CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y > CONFIG_MEMORY_HOTPLUG=y > # CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set > CONFIG_MEMORY_HOTREMOVE=y > CONFIG_MHP_MEMMAP_ON_MEMORY=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y > CONFIG_MEMORY_BALLOON=y > CONFIG_BALLOON_COMPACTION=y > CONFIG_COMPACTION=y > CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 > CONFIG_PAGE_REPORTING=y > CONFIG_MIGRATION=y > CONFIG_DEVICE_MIGRATION=y > CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y > CONFIG_ARCH_ENABLE_THP_MIGRATION=y > CONFIG_CONTIG_ALLOC=y > CONFIG_PHYS_ADDR_T_64BIT=y > CONFIG_MMU_NOTIFIER=y > CONFIG_KSM=y > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 > CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y > CONFIG_MEMORY_FAILURE=y > CONFIG_HWPOISON_INJECT=m > CONFIG_ARCH_WANT_GENERAL_HUGETLB=y > CONFIG_ARCH_WANTS_THP_SWAP=y > CONFIG_TRANSPARENT_HUGEPAGE=y > CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y > # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set > CONFIG_THP_SWAP=y > # CONFIG_READ_ONLY_THP_FOR_FS is not set > CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y > CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y > CONFIG_USE_PERCPU_NUMA_NODE_ID=y > CONFIG_HAVE_SETUP_PER_CPU_AREA=y > CONFIG_FRONTSWAP=y > # CONFIG_CMA is not set > CONFIG_MEM_SOFT_DIRTY=y > CONFIG_GENERIC_EARLY_IOREMAP=y > CONFIG_DEFERRED_STRUCT_PAGE_INIT=y > CONFIG_PAGE_IDLE_FLAG=y > CONFIG_IDLE_PAGE_TRACKING=y > CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y > CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y > CONFIG_ARCH_HAS_PTE_DEVMAP=y > CONFIG_ARCH_HAS_ZONE_DMA_SET=y > CONFIG_ZONE_DMA=y > CONFIG_ZONE_DMA32=y > CONFIG_ZONE_DEVICE=y > CONFIG_HMM_MIRROR=y > CONFIG_GET_FREE_REGION=y > CONFIG_DEVICE_PRIVATE=y > CONFIG_VMAP_PFN=y > CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y > CONFIG_ARCH_HAS_PKEYS=y > CONFIG_VM_EVENT_COUNTERS=y > # CONFIG_PERCPU_STATS is not set > CONFIG_GUP_TEST=y > # CONFIG_DMAPOOL_TEST is not set > CONFIG_ARCH_HAS_PTE_SPECIAL=y > CONFIG_SECRETMEM=y > CONFIG_ANON_VMA_NAME=y > CONFIG_USERFAULTFD=y > CONFIG_HAVE_ARCH_USERFAULTFD_WP=y > CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y > CONFIG_PTE_MARKER_UFFD_WP=y > # CONFIG_LRU_GEN is not set > CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y > CONFIG_PER_VMA_LOCK=y > > # > # Data Access Monitoring > # > CONFIG_DAMON=y > CONFIG_DAMON_VADDR=y > CONFIG_DAMON_PADDR=y > CONFIG_DAMON_SYSFS=y > CONFIG_DAMON_DBGFS=y > # CONFIG_DAMON_RECLAIM is not set > # CONFIG_DAMON_LRU_SORT is not set > # end of Data Access Monitoring > # end of Memory Management options > > CONFIG_NET=y > CONFIG_NET_INGRESS=y > CONFIG_NET_EGRESS=y > CONFIG_NET_REDIRECT=y > CONFIG_SKB_EXTENSIONS=y > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_PACKET_DIAG=m > CONFIG_UNIX=y > CONFIG_UNIX_SCM=y > CONFIG_AF_UNIX_OOB=y > CONFIG_UNIX_DIAG=m > CONFIG_TLS=m > CONFIG_TLS_DEVICE=y > # CONFIG_TLS_TOE is not set > CONFIG_XFRM=y > CONFIG_XFRM_OFFLOAD=y > CONFIG_XFRM_ALGO=y > CONFIG_XFRM_USER=y > # CONFIG_XFRM_USER_COMPAT is not set > # CONFIG_XFRM_INTERFACE is not set > CONFIG_XFRM_SUB_POLICY=y > CONFIG_XFRM_MIGRATE=y > CONFIG_XFRM_STATISTICS=y > CONFIG_XFRM_AH=m > CONFIG_XFRM_ESP=m > CONFIG_XFRM_IPCOMP=m > # CONFIG_NET_KEY is not set > CONFIG_XDP_SOCKETS=y > # CONFIG_XDP_SOCKETS_DIAG is not set > CONFIG_NET_HANDSHAKE=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > CONFIG_IP_ADVANCED_ROUTER=y > CONFIG_IP_FIB_TRIE_STATS=y > CONFIG_IP_MULTIPLE_TABLES=y > CONFIG_IP_ROUTE_MULTIPATH=y > CONFIG_IP_ROUTE_VERBOSE=y > CONFIG_IP_ROUTE_CLASSID=y > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > # CONFIG_IP_PNP_BOOTP is not set > # CONFIG_IP_PNP_RARP is not set > CONFIG_NET_IPIP=m > CONFIG_NET_IPGRE_DEMUX=m > CONFIG_NET_IP_TUNNEL=m > CONFIG_NET_IPGRE=m > CONFIG_NET_IPGRE_BROADCAST=y > CONFIG_IP_MROUTE_COMMON=y > CONFIG_IP_MROUTE=y > CONFIG_IP_MROUTE_MULTIPLE_TABLES=y > CONFIG_IP_PIMSM_V1=y > CONFIG_IP_PIMSM_V2=y > CONFIG_SYN_COOKIES=y > CONFIG_NET_IPVTI=m > CONFIG_NET_UDP_TUNNEL=m > CONFIG_NET_FOU=m > CONFIG_NET_FOU_IP_TUNNELS=y > CONFIG_INET_AH=m > CONFIG_INET_ESP=m > CONFIG_INET_ESP_OFFLOAD=m > # CONFIG_INET_ESPINTCP is not set > CONFIG_INET_IPCOMP=m > CONFIG_INET_TABLE_PERTURB_ORDER=16 > CONFIG_INET_XFRM_TUNNEL=m > CONFIG_INET_TUNNEL=m > CONFIG_INET_DIAG=m > CONFIG_INET_TCP_DIAG=m > CONFIG_INET_UDP_DIAG=m > CONFIG_INET_RAW_DIAG=m > # CONFIG_INET_DIAG_DESTROY is not set > CONFIG_TCP_CONG_ADVANCED=y > CONFIG_TCP_CONG_BIC=m > CONFIG_TCP_CONG_CUBIC=y > CONFIG_TCP_CONG_WESTWOOD=m > CONFIG_TCP_CONG_HTCP=m > CONFIG_TCP_CONG_HSTCP=m > CONFIG_TCP_CONG_HYBLA=m > CONFIG_TCP_CONG_VEGAS=m > CONFIG_TCP_CONG_NV=m > CONFIG_TCP_CONG_SCALABLE=m > CONFIG_TCP_CONG_LP=m > CONFIG_TCP_CONG_VENO=m > CONFIG_TCP_CONG_YEAH=m > CONFIG_TCP_CONG_ILLINOIS=m > CONFIG_TCP_CONG_DCTCP=m > # CONFIG_TCP_CONG_CDG is not set > CONFIG_TCP_CONG_BBR=m > CONFIG_DEFAULT_CUBIC=y > # CONFIG_DEFAULT_RENO is not set > CONFIG_DEFAULT_TCP_CONG="cubic" > CONFIG_TCP_MD5SIG=y > CONFIG_IPV6=y > CONFIG_IPV6_ROUTER_PREF=y > CONFIG_IPV6_ROUTE_INFO=y > CONFIG_IPV6_OPTIMISTIC_DAD=y > CONFIG_INET6_AH=m > CONFIG_INET6_ESP=m > CONFIG_INET6_ESP_OFFLOAD=m > # CONFIG_INET6_ESPINTCP is not set > CONFIG_INET6_IPCOMP=m > CONFIG_IPV6_MIP6=m > # CONFIG_IPV6_ILA is not set > CONFIG_INET6_XFRM_TUNNEL=m > CONFIG_INET6_TUNNEL=m > CONFIG_IPV6_VTI=m > CONFIG_IPV6_SIT=m > CONFIG_IPV6_SIT_6RD=y > CONFIG_IPV6_NDISC_NODETYPE=y > CONFIG_IPV6_TUNNEL=m > CONFIG_IPV6_GRE=m > CONFIG_IPV6_FOU=m > CONFIG_IPV6_FOU_TUNNEL=m > CONFIG_IPV6_MULTIPLE_TABLES=y > # CONFIG_IPV6_SUBTREES is not set > CONFIG_IPV6_MROUTE=y > CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y > CONFIG_IPV6_PIMSM_V2=y > # CONFIG_IPV6_SEG6_LWTUNNEL is not set > # CONFIG_IPV6_SEG6_HMAC is not set > # CONFIG_IPV6_RPL_LWTUNNEL is not set > CONFIG_IPV6_IOAM6_LWTUNNEL=y > CONFIG_NETLABEL=y > CONFIG_MPTCP=y > CONFIG_INET_MPTCP_DIAG=m > CONFIG_MPTCP_IPV6=y > CONFIG_NETWORK_SECMARK=y > CONFIG_NET_PTP_CLASSIFY=y > CONFIG_NETWORK_PHY_TIMESTAMPING=y > CONFIG_NETFILTER=y > CONFIG_NETFILTER_ADVANCED=y > CONFIG_BRIDGE_NETFILTER=m > > # > # Core Netfilter Configuration > # > CONFIG_NETFILTER_INGRESS=y > CONFIG_NETFILTER_EGRESS=y > CONFIG_NETFILTER_SKIP_EGRESS=y > CONFIG_NETFILTER_NETLINK=m > CONFIG_NETFILTER_FAMILY_BRIDGE=y > CONFIG_NETFILTER_FAMILY_ARP=y > CONFIG_NETFILTER_BPF_LINK=y > # CONFIG_NETFILTER_NETLINK_HOOK is not set > # CONFIG_NETFILTER_NETLINK_ACCT is not set > CONFIG_NETFILTER_NETLINK_QUEUE=m > CONFIG_NETFILTER_NETLINK_LOG=m > CONFIG_NETFILTER_NETLINK_OSF=m > CONFIG_NF_CONNTRACK=m > CONFIG_NF_LOG_SYSLOG=m > CONFIG_NETFILTER_CONNCOUNT=m > CONFIG_NF_CONNTRACK_MARK=y > CONFIG_NF_CONNTRACK_SECMARK=y > CONFIG_NF_CONNTRACK_ZONES=y > CONFIG_NF_CONNTRACK_PROCFS=y > CONFIG_NF_CONNTRACK_EVENTS=y > CONFIG_NF_CONNTRACK_TIMEOUT=y > CONFIG_NF_CONNTRACK_TIMESTAMP=y > CONFIG_NF_CONNTRACK_LABELS=y > CONFIG_NF_CONNTRACK_OVS=y > CONFIG_NF_CT_PROTO_DCCP=y > CONFIG_NF_CT_PROTO_GRE=y > CONFIG_NF_CT_PROTO_SCTP=y > CONFIG_NF_CT_PROTO_UDPLITE=y > CONFIG_NF_CONNTRACK_AMANDA=m > CONFIG_NF_CONNTRACK_FTP=m > CONFIG_NF_CONNTRACK_H323=m > CONFIG_NF_CONNTRACK_IRC=m > CONFIG_NF_CONNTRACK_BROADCAST=m > CONFIG_NF_CONNTRACK_NETBIOS_NS=m > CONFIG_NF_CONNTRACK_SNMP=m > CONFIG_NF_CONNTRACK_PPTP=m > CONFIG_NF_CONNTRACK_SANE=m > CONFIG_NF_CONNTRACK_SIP=m > CONFIG_NF_CONNTRACK_TFTP=m > CONFIG_NF_CT_NETLINK=m > CONFIG_NF_CT_NETLINK_TIMEOUT=m > CONFIG_NF_CT_NETLINK_HELPER=m > CONFIG_NETFILTER_NETLINK_GLUE_CT=y > CONFIG_NF_NAT=m > CONFIG_NF_NAT_AMANDA=m > CONFIG_NF_NAT_FTP=m > CONFIG_NF_NAT_IRC=m > CONFIG_NF_NAT_SIP=m > CONFIG_NF_NAT_TFTP=m > CONFIG_NF_NAT_REDIRECT=y > CONFIG_NF_NAT_MASQUERADE=y > CONFIG_NF_NAT_OVS=y > CONFIG_NETFILTER_SYNPROXY=m > CONFIG_NF_TABLES=m > CONFIG_NF_TABLES_INET=y > CONFIG_NF_TABLES_NETDEV=y > CONFIG_NFT_NUMGEN=m > CONFIG_NFT_CT=m > CONFIG_NFT_FLOW_OFFLOAD=m > CONFIG_NFT_CONNLIMIT=m > CONFIG_NFT_LOG=m > CONFIG_NFT_LIMIT=m > CONFIG_NFT_MASQ=m > CONFIG_NFT_REDIR=m > CONFIG_NFT_NAT=m > # CONFIG_NFT_TUNNEL is not set > CONFIG_NFT_QUEUE=m > CONFIG_NFT_QUOTA=m > CONFIG_NFT_REJECT=m > CONFIG_NFT_REJECT_INET=m > CONFIG_NFT_COMPAT=m > CONFIG_NFT_HASH=m > CONFIG_NFT_FIB=m > CONFIG_NFT_FIB_INET=m > # CONFIG_NFT_XFRM is not set > CONFIG_NFT_SOCKET=m > # CONFIG_NFT_OSF is not set > CONFIG_NFT_TPROXY=m > CONFIG_NFT_SYNPROXY=m > CONFIG_NF_DUP_NETDEV=m > CONFIG_NFT_DUP_NETDEV=m > CONFIG_NFT_FWD_NETDEV=m > CONFIG_NFT_FIB_NETDEV=m > # CONFIG_NFT_REJECT_NETDEV is not set > CONFIG_NF_FLOW_TABLE_INET=m > CONFIG_NF_FLOW_TABLE=m > # CONFIG_NF_FLOW_TABLE_PROCFS is not set > CONFIG_NETFILTER_XTABLES=y > # CONFIG_NETFILTER_XTABLES_COMPAT is not set > > # > # Xtables combined modules > # > CONFIG_NETFILTER_XT_MARK=m > CONFIG_NETFILTER_XT_CONNMARK=m > CONFIG_NETFILTER_XT_SET=m > > # > # Xtables targets > # > CONFIG_NETFILTER_XT_TARGET_AUDIT=m > CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m > CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m > CONFIG_NETFILTER_XT_TARGET_CONNMARK=m > CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m > CONFIG_NETFILTER_XT_TARGET_CT=m > CONFIG_NETFILTER_XT_TARGET_DSCP=m > CONFIG_NETFILTER_XT_TARGET_HL=m > CONFIG_NETFILTER_XT_TARGET_HMARK=m > CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m > # CONFIG_NETFILTER_XT_TARGET_LED is not set > CONFIG_NETFILTER_XT_TARGET_LOG=m > CONFIG_NETFILTER_XT_TARGET_MARK=m > CONFIG_NETFILTER_XT_NAT=m > CONFIG_NETFILTER_XT_TARGET_NETMAP=m > CONFIG_NETFILTER_XT_TARGET_NFLOG=m > CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m > CONFIG_NETFILTER_XT_TARGET_NOTRACK=m > CONFIG_NETFILTER_XT_TARGET_RATEEST=m > CONFIG_NETFILTER_XT_TARGET_REDIRECT=m > CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m > CONFIG_NETFILTER_XT_TARGET_TEE=m > CONFIG_NETFILTER_XT_TARGET_TPROXY=m > CONFIG_NETFILTER_XT_TARGET_TRACE=m > CONFIG_NETFILTER_XT_TARGET_SECMARK=m > CONFIG_NETFILTER_XT_TARGET_TCPMSS=m > CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m > > # > # Xtables matches > # > CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m > CONFIG_NETFILTER_XT_MATCH_BPF=m > CONFIG_NETFILTER_XT_MATCH_CGROUP=m > CONFIG_NETFILTER_XT_MATCH_CLUSTER=m > CONFIG_NETFILTER_XT_MATCH_COMMENT=m > CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m > CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m > CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m > CONFIG_NETFILTER_XT_MATCH_CONNMARK=m > CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m > CONFIG_NETFILTER_XT_MATCH_CPU=m > CONFIG_NETFILTER_XT_MATCH_DCCP=m > CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m > CONFIG_NETFILTER_XT_MATCH_DSCP=m > CONFIG_NETFILTER_XT_MATCH_ECN=m > CONFIG_NETFILTER_XT_MATCH_ESP=m > CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m > CONFIG_NETFILTER_XT_MATCH_HELPER=m > CONFIG_NETFILTER_XT_MATCH_HL=m > # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set > CONFIG_NETFILTER_XT_MATCH_IPRANGE=m > CONFIG_NETFILTER_XT_MATCH_IPVS=m > # CONFIG_NETFILTER_XT_MATCH_L2TP is not set > CONFIG_NETFILTER_XT_MATCH_LENGTH=m > CONFIG_NETFILTER_XT_MATCH_LIMIT=m > CONFIG_NETFILTER_XT_MATCH_MAC=m > CONFIG_NETFILTER_XT_MATCH_MARK=m > CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m > # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set > CONFIG_NETFILTER_XT_MATCH_OSF=m > CONFIG_NETFILTER_XT_MATCH_OWNER=m > CONFIG_NETFILTER_XT_MATCH_POLICY=m > CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m > CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m > CONFIG_NETFILTER_XT_MATCH_QUOTA=m > CONFIG_NETFILTER_XT_MATCH_RATEEST=m > CONFIG_NETFILTER_XT_MATCH_REALM=m > CONFIG_NETFILTER_XT_MATCH_RECENT=m > CONFIG_NETFILTER_XT_MATCH_SCTP=m > CONFIG_NETFILTER_XT_MATCH_SOCKET=m > CONFIG_NETFILTER_XT_MATCH_STATE=m > CONFIG_NETFILTER_XT_MATCH_STATISTIC=m > CONFIG_NETFILTER_XT_MATCH_STRING=m > CONFIG_NETFILTER_XT_MATCH_TCPMSS=m > # CONFIG_NETFILTER_XT_MATCH_TIME is not set > # CONFIG_NETFILTER_XT_MATCH_U32 is not set > # end of Core Netfilter Configuration > > CONFIG_IP_SET=m > CONFIG_IP_SET_MAX=256 > CONFIG_IP_SET_BITMAP_IP=m > CONFIG_IP_SET_BITMAP_IPMAC=m > CONFIG_IP_SET_BITMAP_PORT=m > CONFIG_IP_SET_HASH_IP=m > CONFIG_IP_SET_HASH_IPMARK=m > CONFIG_IP_SET_HASH_IPPORT=m > CONFIG_IP_SET_HASH_IPPORTIP=m > CONFIG_IP_SET_HASH_IPPORTNET=m > CONFIG_IP_SET_HASH_IPMAC=m > CONFIG_IP_SET_HASH_MAC=m > CONFIG_IP_SET_HASH_NETPORTNET=m > CONFIG_IP_SET_HASH_NET=m > CONFIG_IP_SET_HASH_NETNET=m > CONFIG_IP_SET_HASH_NETPORT=m > CONFIG_IP_SET_HASH_NETIFACE=m > CONFIG_IP_SET_LIST_SET=m > CONFIG_IP_VS=m > CONFIG_IP_VS_IPV6=y > # CONFIG_IP_VS_DEBUG is not set > CONFIG_IP_VS_TAB_BITS=12 > > # > # IPVS transport protocol load balancing support > # > CONFIG_IP_VS_PROTO_TCP=y > CONFIG_IP_VS_PROTO_UDP=y > CONFIG_IP_VS_PROTO_AH_ESP=y > CONFIG_IP_VS_PROTO_ESP=y > CONFIG_IP_VS_PROTO_AH=y > CONFIG_IP_VS_PROTO_SCTP=y > > # > # IPVS scheduler > # > CONFIG_IP_VS_RR=m > CONFIG_IP_VS_WRR=m > CONFIG_IP_VS_LC=m > CONFIG_IP_VS_WLC=m > CONFIG_IP_VS_FO=m > CONFIG_IP_VS_OVF=m > CONFIG_IP_VS_LBLC=m > CONFIG_IP_VS_LBLCR=m > CONFIG_IP_VS_DH=m > CONFIG_IP_VS_SH=m > # CONFIG_IP_VS_MH is not set > CONFIG_IP_VS_SED=m > CONFIG_IP_VS_NQ=m > # CONFIG_IP_VS_TWOS is not set > > # > # IPVS SH scheduler > # > CONFIG_IP_VS_SH_TAB_BITS=8 > > # > # IPVS MH scheduler > # > CONFIG_IP_VS_MH_TAB_INDEX=12 > > # > # IPVS application helper > # > CONFIG_IP_VS_FTP=m > CONFIG_IP_VS_NFCT=y > CONFIG_IP_VS_PE_SIP=m > > # > # IP: Netfilter Configuration > # > CONFIG_NF_DEFRAG_IPV4=m > CONFIG_NF_SOCKET_IPV4=m > CONFIG_NF_TPROXY_IPV4=m > CONFIG_NF_TABLES_IPV4=y > CONFIG_NFT_REJECT_IPV4=m > CONFIG_NFT_DUP_IPV4=m > CONFIG_NFT_FIB_IPV4=m > CONFIG_NF_TABLES_ARP=y > CONFIG_NF_DUP_IPV4=m > CONFIG_NF_LOG_ARP=m > CONFIG_NF_LOG_IPV4=m > CONFIG_NF_REJECT_IPV4=m > CONFIG_NF_NAT_SNMP_BASIC=m > CONFIG_NF_NAT_PPTP=m > CONFIG_NF_NAT_H323=m > CONFIG_IP_NF_IPTABLES=m > CONFIG_IP_NF_MATCH_AH=m > CONFIG_IP_NF_MATCH_ECN=m > CONFIG_IP_NF_MATCH_RPFILTER=m > CONFIG_IP_NF_MATCH_TTL=m > CONFIG_IP_NF_FILTER=m > CONFIG_IP_NF_TARGET_REJECT=m > CONFIG_IP_NF_TARGET_SYNPROXY=m > CONFIG_IP_NF_NAT=m > CONFIG_IP_NF_TARGET_MASQUERADE=m > CONFIG_IP_NF_TARGET_NETMAP=m > CONFIG_IP_NF_TARGET_REDIRECT=m > CONFIG_IP_NF_MANGLE=m > CONFIG_IP_NF_TARGET_ECN=m > CONFIG_IP_NF_TARGET_TTL=m > CONFIG_IP_NF_RAW=m > CONFIG_IP_NF_SECURITY=m > CONFIG_IP_NF_ARPTABLES=m > CONFIG_IP_NF_ARPFILTER=m > CONFIG_IP_NF_ARP_MANGLE=m > # end of IP: Netfilter Configuration > > # > # IPv6: Netfilter Configuration > # > CONFIG_NF_SOCKET_IPV6=m > CONFIG_NF_TPROXY_IPV6=m > CONFIG_NF_TABLES_IPV6=y > CONFIG_NFT_REJECT_IPV6=m > CONFIG_NFT_DUP_IPV6=m > CONFIG_NFT_FIB_IPV6=m > CONFIG_NF_DUP_IPV6=m > CONFIG_NF_REJECT_IPV6=m > CONFIG_NF_LOG_IPV6=m > CONFIG_IP6_NF_IPTABLES=m > CONFIG_IP6_NF_MATCH_AH=m > CONFIG_IP6_NF_MATCH_EUI64=m > CONFIG_IP6_NF_MATCH_FRAG=m > CONFIG_IP6_NF_MATCH_OPTS=m > CONFIG_IP6_NF_MATCH_HL=m > CONFIG_IP6_NF_MATCH_IPV6HEADER=m > CONFIG_IP6_NF_MATCH_MH=m > CONFIG_IP6_NF_MATCH_RPFILTER=m > CONFIG_IP6_NF_MATCH_RT=m > # CONFIG_IP6_NF_MATCH_SRH is not set > # CONFIG_IP6_NF_TARGET_HL is not set > CONFIG_IP6_NF_FILTER=m > CONFIG_IP6_NF_TARGET_REJECT=m > CONFIG_IP6_NF_TARGET_SYNPROXY=m > CONFIG_IP6_NF_MANGLE=m > CONFIG_IP6_NF_RAW=m > CONFIG_IP6_NF_SECURITY=m > CONFIG_IP6_NF_NAT=m > CONFIG_IP6_NF_TARGET_MASQUERADE=m > CONFIG_IP6_NF_TARGET_NPT=m > # end of IPv6: Netfilter Configuration > > CONFIG_NF_DEFRAG_IPV6=m > CONFIG_NF_TABLES_BRIDGE=m > # CONFIG_NFT_BRIDGE_META is not set > CONFIG_NFT_BRIDGE_REJECT=m > # CONFIG_NF_CONNTRACK_BRIDGE is not set > CONFIG_BRIDGE_NF_EBTABLES=m > CONFIG_BRIDGE_EBT_BROUTE=m > CONFIG_BRIDGE_EBT_T_FILTER=m > CONFIG_BRIDGE_EBT_T_NAT=m > CONFIG_BRIDGE_EBT_802_3=m > CONFIG_BRIDGE_EBT_AMONG=m > CONFIG_BRIDGE_EBT_ARP=m > CONFIG_BRIDGE_EBT_IP=m > CONFIG_BRIDGE_EBT_IP6=m > CONFIG_BRIDGE_EBT_LIMIT=m > CONFIG_BRIDGE_EBT_MARK=m > CONFIG_BRIDGE_EBT_PKTTYPE=m > CONFIG_BRIDGE_EBT_STP=m > CONFIG_BRIDGE_EBT_VLAN=m > CONFIG_BRIDGE_EBT_ARPREPLY=m > CONFIG_BRIDGE_EBT_DNAT=m > CONFIG_BRIDGE_EBT_MARK_T=m > CONFIG_BRIDGE_EBT_REDIRECT=m > CONFIG_BRIDGE_EBT_SNAT=m > CONFIG_BRIDGE_EBT_LOG=m > CONFIG_BRIDGE_EBT_NFLOG=m > # CONFIG_BPFILTER is not set > # CONFIG_IP_DCCP is not set > CONFIG_IP_SCTP=m > # CONFIG_SCTP_DBG_OBJCNT is not set > # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set > CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y > # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set > CONFIG_SCTP_COOKIE_HMAC_MD5=y > CONFIG_SCTP_COOKIE_HMAC_SHA1=y > CONFIG_INET_SCTP_DIAG=m > # CONFIG_RDS is not set > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_L2TP is not set > CONFIG_STP=y > CONFIG_GARP=y > CONFIG_MRP=y > CONFIG_BRIDGE=m > CONFIG_BRIDGE_IGMP_SNOOPING=y > CONFIG_BRIDGE_VLAN_FILTERING=y > # CONFIG_BRIDGE_MRP is not set > # CONFIG_BRIDGE_CFM is not set > # CONFIG_NET_DSA is not set > CONFIG_VLAN_8021Q=y > CONFIG_VLAN_8021Q_GVRP=y > CONFIG_VLAN_8021Q_MVRP=y > CONFIG_LLC=y > # CONFIG_LLC2 is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_PHONET is not set > # CONFIG_6LOWPAN is not set > # CONFIG_IEEE802154 is not set > CONFIG_NET_SCHED=y > > # > # Queueing/Scheduling > # > CONFIG_NET_SCH_HTB=m > CONFIG_NET_SCH_HFSC=m > CONFIG_NET_SCH_PRIO=m > CONFIG_NET_SCH_MULTIQ=m > CONFIG_NET_SCH_RED=m > CONFIG_NET_SCH_SFB=m > CONFIG_NET_SCH_SFQ=m > CONFIG_NET_SCH_TEQL=m > CONFIG_NET_SCH_TBF=m > CONFIG_NET_SCH_CBS=m > CONFIG_NET_SCH_ETF=m > CONFIG_NET_SCH_MQPRIO_LIB=m > CONFIG_NET_SCH_TAPRIO=m > CONFIG_NET_SCH_GRED=m > CONFIG_NET_SCH_NETEM=y > CONFIG_NET_SCH_DRR=m > CONFIG_NET_SCH_MQPRIO=m > CONFIG_NET_SCH_SKBPRIO=m > CONFIG_NET_SCH_CHOKE=m > CONFIG_NET_SCH_QFQ=m > CONFIG_NET_SCH_CODEL=m > CONFIG_NET_SCH_FQ_CODEL=y > CONFIG_NET_SCH_CAKE=m > CONFIG_NET_SCH_FQ=m > CONFIG_NET_SCH_HHF=m > CONFIG_NET_SCH_PIE=m > CONFIG_NET_SCH_FQ_PIE=m > CONFIG_NET_SCH_INGRESS=y > CONFIG_NET_SCH_PLUG=m > CONFIG_NET_SCH_ETS=m > CONFIG_NET_SCH_DEFAULT=y > # CONFIG_DEFAULT_FQ is not set > # CONFIG_DEFAULT_CODEL is not set > CONFIG_DEFAULT_FQ_CODEL=y > # CONFIG_DEFAULT_FQ_PIE is not set > # CONFIG_DEFAULT_SFQ is not set > # CONFIG_DEFAULT_PFIFO_FAST is not set > CONFIG_DEFAULT_NET_SCH="fq_codel" > > # > # Classification > # > CONFIG_NET_CLS=y > CONFIG_NET_CLS_BASIC=m > CONFIG_NET_CLS_ROUTE4=m > CONFIG_NET_CLS_FW=m > CONFIG_NET_CLS_U32=m > CONFIG_CLS_U32_PERF=y > CONFIG_CLS_U32_MARK=y > CONFIG_NET_CLS_FLOW=m > CONFIG_NET_CLS_CGROUP=y > CONFIG_NET_CLS_BPF=m > CONFIG_NET_CLS_FLOWER=m > CONFIG_NET_CLS_MATCHALL=m > CONFIG_NET_EMATCH=y > CONFIG_NET_EMATCH_STACK=32 > CONFIG_NET_EMATCH_CMP=m > CONFIG_NET_EMATCH_NBYTE=m > CONFIG_NET_EMATCH_U32=m > CONFIG_NET_EMATCH_META=m > CONFIG_NET_EMATCH_TEXT=m > CONFIG_NET_EMATCH_CANID=m > CONFIG_NET_EMATCH_IPSET=m > CONFIG_NET_EMATCH_IPT=m > CONFIG_NET_CLS_ACT=y > CONFIG_NET_ACT_POLICE=m > CONFIG_NET_ACT_GACT=m > CONFIG_GACT_PROB=y > CONFIG_NET_ACT_MIRRED=m > CONFIG_NET_ACT_SAMPLE=m > CONFIG_NET_ACT_IPT=m > CONFIG_NET_ACT_NAT=m > CONFIG_NET_ACT_PEDIT=m > CONFIG_NET_ACT_SIMP=m > CONFIG_NET_ACT_SKBEDIT=m > CONFIG_NET_ACT_CSUM=m > CONFIG_NET_ACT_MPLS=m > CONFIG_NET_ACT_VLAN=m > CONFIG_NET_ACT_BPF=m > CONFIG_NET_ACT_CONNMARK=m > CONFIG_NET_ACT_CTINFO=m > CONFIG_NET_ACT_SKBMOD=m > CONFIG_NET_ACT_IFE=m > CONFIG_NET_ACT_TUNNEL_KEY=m > CONFIG_NET_ACT_CT=m > CONFIG_NET_ACT_GATE=m > CONFIG_NET_IFE_SKBMARK=m > CONFIG_NET_IFE_SKBPRIO=m > CONFIG_NET_IFE_SKBTCINDEX=m > # CONFIG_NET_TC_SKB_EXT is not set > CONFIG_NET_SCH_FIFO=y > CONFIG_DCB=y > CONFIG_DNS_RESOLVER=m > # CONFIG_BATMAN_ADV is not set > CONFIG_OPENVSWITCH=m > CONFIG_OPENVSWITCH_GRE=m > CONFIG_OPENVSWITCH_VXLAN=m > CONFIG_VSOCKETS=m > CONFIG_VSOCKETS_DIAG=m > CONFIG_VSOCKETS_LOOPBACK=m > CONFIG_VIRTIO_VSOCKETS=m > CONFIG_VIRTIO_VSOCKETS_COMMON=m > CONFIG_HYPERV_VSOCKETS=m > CONFIG_NETLINK_DIAG=m > CONFIG_MPLS=y > CONFIG_NET_MPLS_GSO=y > CONFIG_MPLS_ROUTING=m > CONFIG_MPLS_IPTUNNEL=m > CONFIG_NET_NSH=y > # CONFIG_HSR is not set > CONFIG_NET_SWITCHDEV=y > CONFIG_NET_L3_MASTER_DEV=y > # CONFIG_QRTR is not set > # CONFIG_NET_NCSI is not set > CONFIG_PCPU_DEV_REFCNT=y > CONFIG_MAX_SKB_FRAGS=17 > CONFIG_RPS=y > CONFIG_RFS_ACCEL=y > CONFIG_SOCK_RX_QUEUE_MAPPING=y > CONFIG_XPS=y > CONFIG_CGROUP_NET_PRIO=y > CONFIG_CGROUP_NET_CLASSID=y > CONFIG_NET_RX_BUSY_POLL=y > CONFIG_BQL=y > CONFIG_BPF_STREAM_PARSER=y > CONFIG_NET_FLOW_LIMIT=y > > # > # Network testing > # > CONFIG_NET_PKTGEN=m > CONFIG_NET_DROP_MONITOR=y > # end of Network testing > # end of Networking options > > # CONFIG_HAMRADIO is not set > CONFIG_CAN=m > CONFIG_CAN_RAW=m > CONFIG_CAN_BCM=m > CONFIG_CAN_GW=m > # CONFIG_CAN_J1939 is not set > # CONFIG_CAN_ISOTP is not set > # CONFIG_BT is not set > # CONFIG_AF_RXRPC is not set > # CONFIG_AF_KCM is not set > CONFIG_STREAM_PARSER=y > # CONFIG_MCTP is not set > CONFIG_FIB_RULES=y > CONFIG_WIRELESS=y > CONFIG_CFG80211=m > # CONFIG_NL80211_TESTMODE is not set > # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set > # CONFIG_CFG80211_CERTIFICATION_ONUS is not set > CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y > CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y > CONFIG_CFG80211_DEFAULT_PS=y > # CONFIG_CFG80211_DEBUGFS is not set > CONFIG_CFG80211_CRDA_SUPPORT=y > # CONFIG_CFG80211_WEXT is not set > CONFIG_MAC80211=m > CONFIG_MAC80211_HAS_RC=y > CONFIG_MAC80211_RC_MINSTREL=y > CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y > CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" > # CONFIG_MAC80211_MESH is not set > CONFIG_MAC80211_LEDS=y > CONFIG_MAC80211_DEBUGFS=y > # CONFIG_MAC80211_MESSAGE_TRACING is not set > # CONFIG_MAC80211_DEBUG_MENU is not set > CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 > CONFIG_RFKILL=m > CONFIG_RFKILL_LEDS=y > CONFIG_RFKILL_INPUT=y > # CONFIG_RFKILL_GPIO is not set > CONFIG_NET_9P=y > CONFIG_NET_9P_FD=y > CONFIG_NET_9P_VIRTIO=y > # CONFIG_NET_9P_DEBUG is not set > # CONFIG_CAIF is not set > CONFIG_CEPH_LIB=m > # CONFIG_CEPH_LIB_PRETTYDEBUG is not set > CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y > CONFIG_NFC=m > # CONFIG_NFC_DIGITAL is not set > CONFIG_NFC_NCI=m > # CONFIG_NFC_NCI_SPI is not set > # CONFIG_NFC_NCI_UART is not set > # CONFIG_NFC_HCI is not set > > # > # Near Field Communication (NFC) devices > # > CONFIG_NFC_VIRTUAL_NCI=m > # CONFIG_NFC_FDP is not set > # CONFIG_NFC_PN533_USB is not set > # CONFIG_NFC_PN533_I2C is not set > # CONFIG_NFC_MRVL_USB is not set > # CONFIG_NFC_ST_NCI_I2C is not set > # CONFIG_NFC_ST_NCI_SPI is not set > # CONFIG_NFC_NXP_NCI is not set > # CONFIG_NFC_S3FWRN5_I2C is not set > # end of Near Field Communication (NFC) devices > > CONFIG_PSAMPLE=m > CONFIG_NET_IFE=m > CONFIG_LWTUNNEL=y > CONFIG_LWTUNNEL_BPF=y > CONFIG_DST_CACHE=y > CONFIG_GRO_CELLS=y > CONFIG_SOCK_VALIDATE_XMIT=y > CONFIG_NET_SELFTESTS=y > CONFIG_NET_SOCK_MSG=y > CONFIG_NET_DEVLINK=y > CONFIG_PAGE_POOL=y > CONFIG_PAGE_POOL_STATS=y > CONFIG_FAILOVER=m > CONFIG_ETHTOOL_NETLINK=y > > # > # Device Drivers > # > CONFIG_HAVE_EISA=y > # CONFIG_EISA is not set > CONFIG_HAVE_PCI=y > CONFIG_PCI=y > CONFIG_PCI_DOMAINS=y > CONFIG_PCIEPORTBUS=y > CONFIG_HOTPLUG_PCI_PCIE=y > CONFIG_PCIEAER=y > CONFIG_PCIEAER_INJECT=m > CONFIG_PCIE_ECRC=y > CONFIG_PCIEASPM=y > CONFIG_PCIEASPM_DEFAULT=y > # CONFIG_PCIEASPM_POWERSAVE is not set > # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set > # CONFIG_PCIEASPM_PERFORMANCE is not set > CONFIG_PCIE_PME=y > CONFIG_PCIE_DPC=y > # CONFIG_PCIE_PTM is not set > # CONFIG_PCIE_EDR is not set > CONFIG_PCI_MSI=y > CONFIG_PCI_QUIRKS=y > # CONFIG_PCI_DEBUG is not set > # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set > CONFIG_PCI_STUB=y > CONFIG_PCI_PF_STUB=m > CONFIG_PCI_ATS=y > CONFIG_PCI_LOCKLESS_CONFIG=y > CONFIG_PCI_IOV=y > CONFIG_PCI_PRI=y > CONFIG_PCI_PASID=y > # CONFIG_PCI_P2PDMA is not set > CONFIG_PCI_LABEL=y > CONFIG_PCI_HYPERV=m > # CONFIG_PCIE_BUS_TUNE_OFF is not set > CONFIG_PCIE_BUS_DEFAULT=y > # CONFIG_PCIE_BUS_SAFE is not set > # CONFIG_PCIE_BUS_PERFORMANCE is not set > # CONFIG_PCIE_BUS_PEER2PEER is not set > CONFIG_VGA_ARB=y > CONFIG_VGA_ARB_MAX_GPUS=64 > CONFIG_HOTPLUG_PCI=y > CONFIG_HOTPLUG_PCI_ACPI=y > CONFIG_HOTPLUG_PCI_ACPI_IBM=m > # CONFIG_HOTPLUG_PCI_CPCI is not set > CONFIG_HOTPLUG_PCI_SHPC=y > > # > # PCI controller drivers > # > CONFIG_VMD=y > CONFIG_PCI_HYPERV_INTERFACE=m > > # > # Cadence-based PCIe controllers > # > # end of Cadence-based PCIe controllers > > # > # DesignWare-based PCIe controllers > # > # CONFIG_PCI_MESON is not set > # CONFIG_PCIE_DW_PLAT_HOST is not set > # end of DesignWare-based PCIe controllers > > # > # Mobiveil-based PCIe controllers > # > # end of Mobiveil-based PCIe controllers > # end of PCI controller drivers > > # > # PCI Endpoint > # > # CONFIG_PCI_ENDPOINT is not set > # end of PCI Endpoint > > # > # PCI switch controller drivers > # > # CONFIG_PCI_SW_SWITCHTEC is not set > # end of PCI switch controller drivers > > # CONFIG_CXL_BUS is not set > # CONFIG_PCCARD is not set > # CONFIG_RAPIDIO is not set > > # > # Generic Driver Options > # > CONFIG_AUXILIARY_BUS=y > # CONFIG_UEVENT_HELPER is not set > CONFIG_DEVTMPFS=y > CONFIG_DEVTMPFS_MOUNT=y > # CONFIG_DEVTMPFS_SAFE is not set > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > > # > # Firmware loader > # > CONFIG_FW_LOADER=y > CONFIG_FW_LOADER_DEBUG=y > CONFIG_FW_LOADER_PAGED_BUF=y > CONFIG_FW_LOADER_SYSFS=y > CONFIG_EXTRA_FIRMWARE="" > CONFIG_FW_LOADER_USER_HELPER=y > # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set > # CONFIG_FW_LOADER_COMPRESS is not set > CONFIG_FW_CACHE=y > CONFIG_FW_UPLOAD=y > # end of Firmware loader > > CONFIG_ALLOW_DEV_COREDUMP=y > # CONFIG_DEBUG_DRIVER is not set > # CONFIG_DEBUG_DEVRES is not set > # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set > CONFIG_HMEM_REPORTING=y > # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set > CONFIG_GENERIC_CPU_AUTOPROBE=y > CONFIG_GENERIC_CPU_VULNERABILITIES=y > CONFIG_REGMAP=y > CONFIG_REGMAP_I2C=m > CONFIG_REGMAP_SPI=m > CONFIG_DMA_SHARED_BUFFER=y > # CONFIG_DMA_FENCE_TRACE is not set > # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set > # end of Generic Driver Options > > # > # Bus devices > # > # CONFIG_MHI_BUS is not set > # CONFIG_MHI_BUS_EP is not set > # end of Bus devices > > CONFIG_CONNECTOR=y > CONFIG_PROC_EVENTS=y > > # > # Firmware Drivers > # > > # > # ARM System Control and Management Interface Protocol > # > # end of ARM System Control and Management Interface Protocol > > CONFIG_EDD=m > # CONFIG_EDD_OFF is not set > CONFIG_FIRMWARE_MEMMAP=y > CONFIG_DMIID=y > CONFIG_DMI_SYSFS=y > CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y > # CONFIG_ISCSI_IBFT is not set > CONFIG_FW_CFG_SYSFS=y > # CONFIG_FW_CFG_SYSFS_CMDLINE is not set > CONFIG_SYSFB=y > # CONFIG_SYSFB_SIMPLEFB is not set > # CONFIG_GOOGLE_FIRMWARE is not set > > # > # EFI (Extensible Firmware Interface) Support > # > CONFIG_EFI_ESRT=y > CONFIG_EFI_VARS_PSTORE=y > CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y > CONFIG_EFI_SOFT_RESERVE=y > CONFIG_EFI_DXE_MEM_ATTRIBUTES=y > CONFIG_EFI_RUNTIME_WRAPPERS=y > # CONFIG_EFI_BOOTLOADER_CONTROL is not set > # CONFIG_EFI_CAPSULE_LOADER is not set > # CONFIG_EFI_TEST is not set > # CONFIG_APPLE_PROPERTIES is not set > # CONFIG_RESET_ATTACK_MITIGATION is not set > # CONFIG_EFI_RCI2_TABLE is not set > # CONFIG_EFI_DISABLE_PCI_DMA is not set > CONFIG_EFI_EARLYCON=y > CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y > # CONFIG_EFI_DISABLE_RUNTIME is not set > # CONFIG_EFI_COCO_SECRET is not set > # end of EFI (Extensible Firmware Interface) Support > > CONFIG_UEFI_CPER=y > CONFIG_UEFI_CPER_X86=y > > # > # Tegra firmware driver > # > # end of Tegra firmware driver > # end of Firmware Drivers > > # CONFIG_GNSS is not set > # CONFIG_MTD is not set > # CONFIG_OF is not set > CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y > CONFIG_PARPORT=m > CONFIG_PARPORT_PC=m > CONFIG_PARPORT_SERIAL=m > # CONFIG_PARPORT_PC_FIFO is not set > # CONFIG_PARPORT_PC_SUPERIO is not set > CONFIG_PARPORT_1284=y > CONFIG_PNP=y > # CONFIG_PNP_DEBUG_MESSAGES is not set > > # > # Protocols > # > CONFIG_PNPACPI=y > CONFIG_BLK_DEV=y > CONFIG_BLK_DEV_NULL_BLK=m > # CONFIG_BLK_DEV_FD is not set > CONFIG_CDROM=m > # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set > CONFIG_ZRAM=m > CONFIG_ZRAM_DEF_COMP_LZORLE=y > # CONFIG_ZRAM_DEF_COMP_LZO is not set > CONFIG_ZRAM_DEF_COMP="lzo-rle" > CONFIG_ZRAM_WRITEBACK=y > # CONFIG_ZRAM_MEMORY_TRACKING is not set > # CONFIG_ZRAM_MULTI_COMP is not set > CONFIG_BLK_DEV_LOOP=m > CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 > # CONFIG_BLK_DEV_DRBD is not set > CONFIG_BLK_DEV_NBD=m > CONFIG_BLK_DEV_RAM=m > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > CONFIG_CDROM_PKTCDVD=m > CONFIG_CDROM_PKTCDVD_BUFFERS=8 > # CONFIG_CDROM_PKTCDVD_WCACHE is not set > # CONFIG_ATA_OVER_ETH is not set > CONFIG_VIRTIO_BLK=m > CONFIG_BLK_DEV_RBD=m > # CONFIG_BLK_DEV_UBLK is not set > > # > # NVME Support > # > CONFIG_NVME_CORE=m > CONFIG_BLK_DEV_NVME=m > CONFIG_NVME_MULTIPATH=y > # CONFIG_NVME_VERBOSE_ERRORS is not set > # CONFIG_NVME_HWMON is not set > # CONFIG_NVME_FC is not set > # CONFIG_NVME_TCP is not set > # CONFIG_NVME_AUTH is not set > # CONFIG_NVME_TARGET is not set > # end of NVME Support > > # > # Misc devices > # > # CONFIG_AD525X_DPOT is not set > # CONFIG_DUMMY_IRQ is not set > # CONFIG_IBM_ASM is not set > # CONFIG_PHANTOM is not set > CONFIG_TIFM_CORE=m > CONFIG_TIFM_7XX1=m > # CONFIG_ICS932S401 is not set > CONFIG_ENCLOSURE_SERVICES=m > # CONFIG_SGI_XP is not set > CONFIG_HP_ILO=m > # CONFIG_SGI_GRU is not set > CONFIG_APDS9802ALS=m > CONFIG_ISL29003=m > CONFIG_ISL29020=m > CONFIG_SENSORS_TSL2550=m > CONFIG_SENSORS_BH1770=m > CONFIG_SENSORS_APDS990X=m > # CONFIG_HMC6352 is not set > # CONFIG_DS1682 is not set > # CONFIG_LATTICE_ECP3_CONFIG is not set > # CONFIG_SRAM is not set > # CONFIG_DW_XDATA_PCIE is not set > # CONFIG_PCI_ENDPOINT_TEST is not set > # CONFIG_XILINX_SDFEC is not set > # CONFIG_C2PORT is not set > > # > # EEPROM support > # > # CONFIG_EEPROM_AT24 is not set > # CONFIG_EEPROM_AT25 is not set > CONFIG_EEPROM_LEGACY=m > CONFIG_EEPROM_MAX6875=m > CONFIG_EEPROM_93CX6=m > # CONFIG_EEPROM_93XX46 is not set > # CONFIG_EEPROM_IDT_89HPESX is not set > # CONFIG_EEPROM_EE1004 is not set > # end of EEPROM support > > # CONFIG_CB710_CORE is not set > > # > # Texas Instruments shared transport line discipline > # > # CONFIG_TI_ST is not set > # end of Texas Instruments shared transport line discipline > > # CONFIG_SENSORS_LIS3_I2C is not set > # CONFIG_ALTERA_STAPL is not set > CONFIG_INTEL_MEI=m > CONFIG_INTEL_MEI_ME=m > # CONFIG_INTEL_MEI_TXE is not set > # CONFIG_INTEL_MEI_GSC is not set > # CONFIG_INTEL_MEI_HDCP is not set > # CONFIG_INTEL_MEI_PXP is not set > # CONFIG_VMWARE_VMCI is not set > # CONFIG_GENWQE is not set > # CONFIG_ECHO is not set > # CONFIG_BCM_VK is not set > # CONFIG_MISC_ALCOR_PCI is not set > # CONFIG_MISC_RTSX_PCI is not set > # CONFIG_MISC_RTSX_USB is not set > # CONFIG_UACCE is not set > CONFIG_PVPANIC=y > # CONFIG_PVPANIC_MMIO is not set > # CONFIG_PVPANIC_PCI is not set > # CONFIG_GP_PCI1XXXX is not set > # end of Misc devices > > # > # SCSI device support > # > CONFIG_SCSI_MOD=y > CONFIG_RAID_ATTRS=m > CONFIG_SCSI_COMMON=y > CONFIG_SCSI=y > CONFIG_SCSI_DMA=y > CONFIG_SCSI_NETLINK=y > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=m > CONFIG_CHR_DEV_ST=m > CONFIG_BLK_DEV_SR=m > CONFIG_CHR_DEV_SG=m > CONFIG_BLK_DEV_BSG=y > CONFIG_CHR_DEV_SCH=m > CONFIG_SCSI_ENCLOSURE=m > CONFIG_SCSI_CONSTANTS=y > CONFIG_SCSI_LOGGING=y > CONFIG_SCSI_SCAN_ASYNC=y > > # > # SCSI Transports > # > CONFIG_SCSI_SPI_ATTRS=m > CONFIG_SCSI_FC_ATTRS=m > CONFIG_SCSI_ISCSI_ATTRS=m > CONFIG_SCSI_SAS_ATTRS=m > CONFIG_SCSI_SAS_LIBSAS=m > CONFIG_SCSI_SAS_ATA=y > CONFIG_SCSI_SAS_HOST_SMP=y > CONFIG_SCSI_SRP_ATTRS=m > # end of SCSI Transports > > CONFIG_SCSI_LOWLEVEL=y > # CONFIG_ISCSI_TCP is not set > # CONFIG_ISCSI_BOOT_SYSFS is not set > # CONFIG_SCSI_CXGB3_ISCSI is not set > # CONFIG_SCSI_CXGB4_ISCSI is not set > # CONFIG_SCSI_BNX2_ISCSI is not set > # CONFIG_BE2ISCSI is not set > # CONFIG_BLK_DEV_3W_XXXX_RAID is not set > # CONFIG_SCSI_HPSA is not set > # CONFIG_SCSI_3W_9XXX is not set > # CONFIG_SCSI_3W_SAS is not set > # CONFIG_SCSI_ACARD is not set > # CONFIG_SCSI_AACRAID is not set > # CONFIG_SCSI_AIC7XXX is not set > # CONFIG_SCSI_AIC79XX is not set > # CONFIG_SCSI_AIC94XX is not set > # CONFIG_SCSI_MVSAS is not set > # CONFIG_SCSI_MVUMI is not set > # CONFIG_SCSI_ADVANSYS is not set > # CONFIG_SCSI_ARCMSR is not set > # CONFIG_SCSI_ESAS2R is not set > CONFIG_MEGARAID_NEWGEN=y > CONFIG_MEGARAID_MM=m > CONFIG_MEGARAID_MAILBOX=m > CONFIG_MEGARAID_LEGACY=m > CONFIG_MEGARAID_SAS=m > CONFIG_SCSI_MPT3SAS=m > CONFIG_SCSI_MPT2SAS_MAX_SGE=128 > CONFIG_SCSI_MPT3SAS_MAX_SGE=128 > # CONFIG_SCSI_MPT2SAS is not set > # CONFIG_SCSI_MPI3MR is not set > # CONFIG_SCSI_SMARTPQI is not set > # CONFIG_SCSI_HPTIOP is not set > # CONFIG_SCSI_BUSLOGIC is not set > # CONFIG_SCSI_MYRB is not set > # CONFIG_SCSI_MYRS is not set > # CONFIG_VMWARE_PVSCSI is not set > CONFIG_HYPERV_STORAGE=m > # CONFIG_LIBFC is not set > # CONFIG_SCSI_SNIC is not set > # CONFIG_SCSI_DMX3191D is not set > # CONFIG_SCSI_FDOMAIN_PCI is not set > CONFIG_SCSI_ISCI=m > # CONFIG_SCSI_IPS is not set > # CONFIG_SCSI_INITIO is not set > # CONFIG_SCSI_INIA100 is not set > # CONFIG_SCSI_PPA is not set > # CONFIG_SCSI_IMM is not set > # CONFIG_SCSI_STEX is not set > # CONFIG_SCSI_SYM53C8XX_2 is not set > # CONFIG_SCSI_IPR is not set > # CONFIG_SCSI_QLOGIC_1280 is not set > # CONFIG_SCSI_QLA_FC is not set > # CONFIG_SCSI_QLA_ISCSI is not set > # CONFIG_SCSI_LPFC is not set > # CONFIG_SCSI_DC395x is not set > # CONFIG_SCSI_AM53C974 is not set > # CONFIG_SCSI_WD719X is not set > CONFIG_SCSI_DEBUG=m > # CONFIG_SCSI_PMCRAID is not set > # CONFIG_SCSI_PM8001 is not set > # CONFIG_SCSI_BFA_FC is not set > # CONFIG_SCSI_VIRTIO is not set > # CONFIG_SCSI_CHELSIO_FCOE is not set > CONFIG_SCSI_DH=y > CONFIG_SCSI_DH_RDAC=y > CONFIG_SCSI_DH_HP_SW=y > CONFIG_SCSI_DH_EMC=y > CONFIG_SCSI_DH_ALUA=y > # end of SCSI device support > > CONFIG_ATA=m > CONFIG_SATA_HOST=y > CONFIG_PATA_TIMINGS=y > CONFIG_ATA_VERBOSE_ERROR=y > CONFIG_ATA_FORCE=y > CONFIG_ATA_ACPI=y > # CONFIG_SATA_ZPODD is not set > CONFIG_SATA_PMP=y > > # > # Controllers with non-SFF native interface > # > CONFIG_SATA_AHCI=m > CONFIG_SATA_MOBILE_LPM_POLICY=0 > CONFIG_SATA_AHCI_PLATFORM=m > # CONFIG_AHCI_DWC is not set > # CONFIG_SATA_INIC162X is not set > # CONFIG_SATA_ACARD_AHCI is not set > # CONFIG_SATA_SIL24 is not set > CONFIG_ATA_SFF=y > > # > # SFF controllers with custom DMA interface > # > # CONFIG_PDC_ADMA is not set > # CONFIG_SATA_QSTOR is not set > # CONFIG_SATA_SX4 is not set > CONFIG_ATA_BMDMA=y > > # > # SATA SFF controllers with BMDMA > # > CONFIG_ATA_PIIX=m > # CONFIG_SATA_DWC is not set > # CONFIG_SATA_MV is not set > # CONFIG_SATA_NV is not set > # CONFIG_SATA_PROMISE is not set > # CONFIG_SATA_SIL is not set > # CONFIG_SATA_SIS is not set > # CONFIG_SATA_SVW is not set > # CONFIG_SATA_ULI is not set > # CONFIG_SATA_VIA is not set > # CONFIG_SATA_VITESSE is not set > > # > # PATA SFF controllers with BMDMA > # > # CONFIG_PATA_ALI is not set > # CONFIG_PATA_AMD is not set > # CONFIG_PATA_ARTOP is not set > # CONFIG_PATA_ATIIXP is not set > # CONFIG_PATA_ATP867X is not set > # CONFIG_PATA_CMD64X is not set > # CONFIG_PATA_CYPRESS is not set > # CONFIG_PATA_EFAR is not set > # CONFIG_PATA_HPT366 is not set > # CONFIG_PATA_HPT37X is not set > # CONFIG_PATA_HPT3X2N is not set > # CONFIG_PATA_HPT3X3 is not set > # CONFIG_PATA_IT8213 is not set > # CONFIG_PATA_IT821X is not set > # CONFIG_PATA_JMICRON is not set > # CONFIG_PATA_MARVELL is not set > # CONFIG_PATA_NETCELL is not set > # CONFIG_PATA_NINJA32 is not set > # CONFIG_PATA_NS87415 is not set > # CONFIG_PATA_OLDPIIX is not set > # CONFIG_PATA_OPTIDMA is not set > # CONFIG_PATA_PDC2027X is not set > # CONFIG_PATA_PDC_OLD is not set > # CONFIG_PATA_RADISYS is not set > # CONFIG_PATA_RDC is not set > # CONFIG_PATA_SCH is not set > # CONFIG_PATA_SERVERWORKS is not set > # CONFIG_PATA_SIL680 is not set > # CONFIG_PATA_SIS is not set > # CONFIG_PATA_TOSHIBA is not set > # CONFIG_PATA_TRIFLEX is not set > # CONFIG_PATA_VIA is not set > # CONFIG_PATA_WINBOND is not set > > # > # PIO-only SFF controllers > # > # CONFIG_PATA_CMD640_PCI is not set > # CONFIG_PATA_MPIIX is not set > # CONFIG_PATA_NS87410 is not set > # CONFIG_PATA_OPTI is not set > # CONFIG_PATA_RZ1000 is not set > # CONFIG_PATA_PARPORT is not set > > # > # Generic fallback / legacy drivers > # > # CONFIG_PATA_ACPI is not set > CONFIG_ATA_GENERIC=m > # CONFIG_PATA_LEGACY is not set > CONFIG_MD=y > CONFIG_BLK_DEV_MD=y > CONFIG_MD_AUTODETECT=y > CONFIG_MD_LINEAR=m > CONFIG_MD_RAID0=m > CONFIG_MD_RAID1=m > CONFIG_MD_RAID10=m > CONFIG_MD_RAID456=m > # CONFIG_MD_MULTIPATH is not set > CONFIG_MD_FAULTY=m > # CONFIG_BCACHE is not set > CONFIG_BLK_DEV_DM_BUILTIN=y > CONFIG_BLK_DEV_DM=m > CONFIG_DM_DEBUG=y > CONFIG_DM_BUFIO=m > # CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set > CONFIG_DM_BIO_PRISON=m > CONFIG_DM_PERSISTENT_DATA=m > # CONFIG_DM_UNSTRIPED is not set > CONFIG_DM_CRYPT=m > CONFIG_DM_SNAPSHOT=m > CONFIG_DM_THIN_PROVISIONING=m > CONFIG_DM_CACHE=m > CONFIG_DM_CACHE_SMQ=m > CONFIG_DM_WRITECACHE=m > # CONFIG_DM_EBS is not set > CONFIG_DM_ERA=m > # CONFIG_DM_CLONE is not set > CONFIG_DM_MIRROR=m > CONFIG_DM_LOG_USERSPACE=m > CONFIG_DM_RAID=m > CONFIG_DM_ZERO=m > CONFIG_DM_MULTIPATH=m > CONFIG_DM_MULTIPATH_QL=m > CONFIG_DM_MULTIPATH_ST=m > # CONFIG_DM_MULTIPATH_HST is not set > # CONFIG_DM_MULTIPATH_IOA is not set > CONFIG_DM_DELAY=m > # CONFIG_DM_DUST is not set > CONFIG_DM_UEVENT=y > CONFIG_DM_FLAKEY=m > CONFIG_DM_VERITY=m > # CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set > # CONFIG_DM_VERITY_FEC is not set > CONFIG_DM_SWITCH=m > CONFIG_DM_LOG_WRITES=m > CONFIG_DM_INTEGRITY=m > CONFIG_DM_AUDIT=y > # CONFIG_TARGET_CORE is not set > # CONFIG_FUSION is not set > > # > # IEEE 1394 (FireWire) support > # > CONFIG_FIREWIRE=m > CONFIG_FIREWIRE_OHCI=m > CONFIG_FIREWIRE_SBP2=m > CONFIG_FIREWIRE_NET=m > # CONFIG_FIREWIRE_NOSY is not set > # end of IEEE 1394 (FireWire) support > > CONFIG_MACINTOSH_DRIVERS=y > CONFIG_MAC_EMUMOUSEBTN=y

2 years

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror