- Linux-kselftest-mirror - lists.linaro.org

[PATCH bpf-next v2 01/10] selftests: xsk: Add xskxceiver.h dependency to Makefile

by Kal Conley

xskxceiver depends on xskxceiver.h so tell make about it. Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 4a8ef118fd9d..223be997f15d 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -612,7 +612,7 @@ $(OUTPUT)/test_verifier: test_verifier.c verifier/tests.h $(BPFOBJ) | $(OUTPUT) $(call msg,BINARY,,$@) $(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@ -$(OUTPUT)/xskxceiver: xskxceiver.c $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT) +$(OUTPUT)/xskxceiver: xskxceiver.c xskxceiver.h $(OUTPUT)/xsk.o $(OUTPUT)/xsk_xdp_progs.skel.h $(BPFOBJ) | $(OUTPUT) $(call msg,BINARY,,$@) $(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@ -- 2.39.2

2 years, 3 months

1
0
0 0

[PATCH bpf-next 3/3] selftests: xsk: Add tests for 8K and 9K frame sizes

by Kal Conley

Add tests: - RUN_TO_COMPLETION_8K_FRAME_SIZE: frame_size=8192 (aligned) - RUN_TO_COMPLETION_9K_FRAME_SIZE: frame_size=9000 (unaligned) Signed-off-by: Kal Conley <kal.conley(a)dectris.com> --- tools/testing/selftests/bpf/xskxceiver.c | 24 ++++++++++++++++++++++++ tools/testing/selftests/bpf/xskxceiver.h | 2 ++ 2 files changed, 26 insertions(+) diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c index 7a47ef28fbce..f10ff8c5e9c5 100644 --- a/tools/testing/selftests/bpf/xskxceiver.c +++ b/tools/testing/selftests/bpf/xskxceiver.c @@ -1789,6 +1789,30 @@ static void run_pkt_test(struct test_spec *test, enum test_mode mode, enum test_ pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); testapp_validate_traffic(test); break; + case TEST_TYPE_RUN_TO_COMPLETION_8K_FRAME: + if (!hugepages_present(test->ifobj_tx)) { + ksft_test_result_skip("No 2M huge pages present.\n"); + return; + } + test_spec_set_name(test, "RUN_TO_COMPLETION_8K_FRAME_SIZE"); + test->ifobj_tx->umem->frame_size = 8192; + test->ifobj_rx->umem->frame_size = 8192; + pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); + testapp_validate_traffic(test); + break; + case TEST_TYPE_RUN_TO_COMPLETION_9K_FRAME: + if (!hugepages_present(test->ifobj_tx)) { + ksft_test_result_skip("No 2M huge pages present.\n"); + return; + } + test_spec_set_name(test, "RUN_TO_COMPLETION_9K_FRAME_SIZE"); + test->ifobj_tx->umem->frame_size = 9000; + test->ifobj_rx->umem->frame_size = 9000; + test->ifobj_tx->umem->unaligned_mode = true; + test->ifobj_rx->umem->unaligned_mode = true; + pkt_stream_replace(test, DEFAULT_PKT_CNT, PKT_SIZE); + testapp_validate_traffic(test); + break; case TEST_TYPE_RX_POLL: test->ifobj_rx->use_poll = true; test_spec_set_name(test, "POLL_RX"); diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h index 3e8ec7d8ec32..ff723b6d7852 100644 --- a/tools/testing/selftests/bpf/xskxceiver.h +++ b/tools/testing/selftests/bpf/xskxceiver.h @@ -70,6 +70,8 @@ enum test_mode { enum test_type { TEST_TYPE_RUN_TO_COMPLETION, TEST_TYPE_RUN_TO_COMPLETION_2K_FRAME, + TEST_TYPE_RUN_TO_COMPLETION_8K_FRAME, + TEST_TYPE_RUN_TO_COMPLETION_9K_FRAME, TEST_TYPE_RUN_TO_COMPLETION_SINGLE_PKT, TEST_TYPE_RX_POLL, TEST_TYPE_TX_POLL, -- 2.39.2

2 years, 3 months

3
3
0 0

[PATCH v2 0/4] iommufd: Add iommu hardware info reporting

by Yi Liu

iommufd gives userspace the capability to manipulate iommu subsytem. e.g. DMA map/unmap etc. In the near future, it will support iommu nested translation. Different platform vendors have different implementation for the nested translation. So before set up nested translation, userspace needs to know the hardware iommu information. For example, Intel VT-d supports using guest I/O page table as the stage-1 translation table. This requires guest I/O page table be compatible with hardware IOMMU. This series reports the iommu hardware information for a given iommufd_device which has been bound to iommufd. It is preparation work for userspace to allocate hwpt for given device. Like the nested translation support[1]. This series introduces an iommu op to report the iommu hardware info, and an ioctl IOMMU_DEVICE_GET_HW_INFO is added to report such hardware info to user. enum iommu_hw_info_type is defined to differentiate the iommu hardware info reported to user hence user can decode them. This series only adds the framework for iommu hw info reporting, the complete reporting path needs vendor specific definition and driver support. The full picture is available in [1] as well. base-commit: 4c7e97cb6e65eab02991f60a5cc7a4fed5498c7a [1] https://github.com/yiliu1765/iommufd/tree/iommufd_nesting Change log: v2: - Drop patch 05 of v1 as it is already covered by other series - Rename the capability info to be iommu hardware info v1: https://lore.kernel.org/linux-iommu/20230209041642.9346-1-yi.l.liu@intel.co… Regards, Yi Liu Lu Baolu (1): iommu: Add new iommu op to get iommu hardware information Nicolin Chen (1): iommufd/selftest: Add coverage for IOMMU_DEVICE_GET_HW_INFO ioctl Yi Liu (2): iommu: Move dev_iommu_ops() to private header iommufd: Add IOMMU_DEVICE_GET_HW_INFO drivers/iommu/iommu-priv.h | 11 +++ drivers/iommu/iommu.c | 2 + drivers/iommu/iommufd/device.c | 75 +++++++++++++++++++ drivers/iommu/iommufd/iommufd_private.h | 1 + drivers/iommu/iommufd/iommufd_test.h | 15 ++++ drivers/iommu/iommufd/main.c | 3 + drivers/iommu/iommufd/selftest.c | 16 ++++ include/linux/iommu.h | 24 +++--- include/uapi/linux/iommufd.h | 47 ++++++++++++ tools/testing/selftests/iommu/iommufd.c | 17 ++++- tools/testing/selftests/iommu/iommufd_utils.h | 26 +++++++ 11 files changed, 225 insertions(+), 12 deletions(-) -- 2.34.1

2 years, 3 months

5
15
0 0

[PATCH][next] selftests: prctl: Fix spelling mistake "anonynous" -> "anonymous"

by Colin Ian King

There is a spelling mistake in an log message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/prctl/set-anon-vma-name-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/prctl/set-anon-vma-name-test.c b/tools/testing/selftests/prctl/set-anon-vma-name-test.c index 26d853c5a0c1..4275cb256dce 100644 --- a/tools/testing/selftests/prctl/set-anon-vma-name-test.c +++ b/tools/testing/selftests/prctl/set-anon-vma-name-test.c @@ -97,7 +97,7 @@ TEST_F(vma, renaming) { TH_LOG("Try to pass invalid name (with non-printable character \\1) to rename the VMA"); EXPECT_EQ(rename_vma((unsigned long)self->ptr_anon, AREA_SIZE, BAD_NAME), -EINVAL); - TH_LOG("Try to rename non-anonynous VMA"); + TH_LOG("Try to rename non-anonymous VMA"); EXPECT_EQ(rename_vma((unsigned long) self->ptr_not_anon, AREA_SIZE, GOOD_NAME), -EINVAL); } -- 2.30.2

2 years, 3 months

1
0
0 0

[PATCH net-next v2 0/4] mptcp: a couple of cleanups and improvements

by Matthieu Baerts

Patch 1 removes an unneeded address copy in subflow_syn_recv_sock(). Patch 2 simplifies subflow_syn_recv_sock() to postpone some actions and to avoid a bunch of conditionals. Patch 3 stops reporting limits that are not taken into account when the userspace PM is used. Patch 4 adds a new test to validate that the 'subflows' field reported by the kernel is correct. Such info can be retrieved via Netlink (e.g. with ss) or getsockopt(SOL_MPTCP, MPTCP_INFO). Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> --- Changes in v2: - Patch 3/4's commit message has been updated to use the correct SHA - Rebased on latest net-next - Link to v1: https://lore.kernel.org/r/20230324-upstream-net-next-20230324-misc-features… --- Geliang Tang (1): selftests: mptcp: add mptcp_info tests Matthieu Baerts (1): mptcp: do not fill info not used by the PM in used Paolo Abeni (2): mptcp: avoid unneeded address copy mptcp: simplify subflow_syn_recv_sock() net/mptcp/sockopt.c | 20 +++++++---- net/mptcp/subflow.c | 43 +++++++--------------- tools/testing/selftests/net/mptcp/mptcp_join.sh | 47 ++++++++++++++++++++++++- 3 files changed, 72 insertions(+), 38 deletions(-) --- base-commit: e5b42483ccce50d5b957f474fd332afd4ef0c27b change-id: 20230324-upstream-net-next-20230324-misc-features-178b2b618414 Best regards, -- Matthieu Baerts <matthieu.baerts(a)tessares.net>

2 years, 3 months

2
5
0 0

Language Services for Your Business

by Ariel Zhang

2 years, 3 months

1
0
0 0

[PATCH] kunit: increase KUNIT_LOG_SIZE to 2048 bytes

by Heiko Carstens

The s390 specific test_unwind kunit test has 39 parameterized tests. The results in debugfs are truncated since the full log doesn't fit into 1500 bytes. Therefore increase KUNIT_LOG_SIZE to 2048 bytes in a similar way like it was done recently with commit "kunit: fix bug in debugfs logs of parameterized tests". With that the whole test result is present. Reported-by: Alexander Egorenkov <egorenar(a)linux.ibm.com> Signed-off-by: Heiko Carstens <hca(a)linux.ibm.com> --- include/kunit/test.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 9721584027d8..57b309c6ca27 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -34,7 +34,7 @@ DECLARE_STATIC_KEY_FALSE(kunit_running); struct kunit; /* Size of log associated with test. */ -#define KUNIT_LOG_SIZE 1500 +#define KUNIT_LOG_SIZE 2048 /* Maximum size of parameter description string. */ #define KUNIT_PARAM_DESC_SIZE 128 -- 2.37.2

2 years, 3 months

3
2
0 0

[PATCH v5 0/6] RISC-V Hardware Probing User Interface

by Evan Green

There's been a bunch of off-list discussions about this, including at Plumbers. The original plan was to do something involving providing an ISA string to userspace, but ISA strings just aren't sufficient for a stable ABI any more: in order to parse an ISA string users need the version of the specifications that the string is written to, the version of each extension (sometimes at a finer granularity than the RISC-V releases/versions encode), and the expected use case for the ISA string (ie, is it a U-mode or M-mode string). That's a lot of complexity to try and keep ABI compatible and it's probably going to continue to grow, as even if there's no more complexity in the specifications we'll have to deal with the various ISA string parsing oddities that end up all over userspace. Instead this patch set takes a very different approach and provides a set of key/value pairs that encode various bits about the system. The big advantage here is that we can clearly define what these mean so we can ensure ABI stability, but it also allows us to encode information that's unlikely to ever appear in an ISA string (see the misaligned access performance, for example). The resulting interface looks a lot like what arm64 and x86 do, and will hopefully fit well into something like ACPI in the future. The actual user interface is a syscall, with a vDSO function in front of it. The vDSO function can answer some queries without a syscall at all, and falls back to the syscall for cases it doesn't have answers to. Currently we prepopulate it with an array of answers for all keys and a CPU set of "all CPUs". This can be adjusted as necessary to provide fast answers to the most common queries. An example series in glibc exposing this syscall and using it in an ifunc selector for memcpy can be found at [1]. I'm about to send a v2 of that series out that incorporates the vDSO function. I was asked about the performance delta between this and something like sysfs. I created a small test program [2] and ran it on a Nezha D1 Allwinner board. Doing each operation 100000 times and dividing, these operations take the following amount of time: - open()+read()+close() of /sys/kernel/cpu_byteorder: 3.8us - access("/sys/kernel/cpu_byteorder", R_OK): 1.3us - riscv_hwprobe() vDSO and syscall: .0094us - riscv_hwprobe() vDSO with no syscall: 0.0091us These numbers get farther apart if we query multiple keys, as sysfs will scale linearly with the number of keys, where the dedicated syscall stays the same. To frame these numbers, I also did a tight fork/exec/wait loop, which I measured as 4.8ms. So doing 4 open/read/close operations is a delta of about 0.3%, versus a single vDSO call is a delta of essentially zero. [1] https://public-inbox.org/libc-alpha/20230206194819.1679472-1-evan@rivosinc.… [2] https://pastebin.com/x84NEKaS Changes in v5: - Added tags - Fixed misuse of ISA_EXT_c as bitmap, changed to use riscv_isa_extension_available() (Heiko, Conor) - Document the alternatives approach in the commit message (Conor and Heiko). - Fix __init call warnings by making probe_vendor_features() and thead_feature_probe_func() __init_or_module. - Fixed compat vdso compilation failure (lkp). Changes in v4: - Used real types in syscall prototypes (Arnd) - Fixed static line break in do_riscv_hwprobe() (Conor) - Added newlines between documentation lists (Conor) - Crispen up size types to size_t, and cpu indices to int (Joe) - Fix copy_from_user() return logic bug (found via kselftests!) - Add __user to SYSCALL_DEFINE() to fix warning - More newlines in BASE_BEHAVIOR_IMA documentation (Conor) - Add newlines to CPUPERF_0 documentation (Conor) - Add UNSUPPORTED value (Conor) - Switched from DT to alternatives-based probing (Rob) - Crispen up cpu index type to always be int (Conor) - Fixed selftests commit description, no more tiny libc (Mark Brown) - Fixed selftest syscall prototype types to match v4. - Added a prototype to fix -Wmissing-prototype warning (lkp(a)intel.com) - Fixed rv32 build failure (lkp(a)intel.com) - Make vdso prototype match syscall types update Changes in v3: - Updated copyright date in cpufeature.h - Fixed typo in cpufeature.h comment (Conor) - Refactored functions so that kernel mode can query too, in preparation for the vDSO data population. - Changed the vendor/arch/imp IDs to return a value of -1 on mismatch rather than failing the whole call. - Const cpumask pointer in hwprobe_mid() - Embellished documentation WRT cpu_set and the returned values. - Renamed hwprobe_mid() to hwprobe_arch_id() (Conor) - Fixed machine ID doc warnings, changed elements to c:macro:. - Completed dangling unistd.h comment (Conor) - Fixed line breaks and minor logic optimization (Conor). - Use riscv_cached_mxxxid() (Conor) - Refactored base ISA behavior probe to allow kernel probing as well, in prep for vDSO data initialization. - Fixed doc warnings in IMA text list, use :c:macro:. - Have hwprobe_misaligned return int instead of long. - Constify cpumask pointer in hwprobe_misaligned() - Fix warnings in _PERF_O list documentation, use :c:macro:. - Move include cpufeature.h to misaligned patch. - Fix documentation mismatch for RISCV_HWPROBE_KEY_CPUPERF_0 (Conor) - Use for_each_possible_cpu() instead of NR_CPUS (Conor) - Break early in misaligned access iteration (Conor) - Increase MISALIGNED_MASK from 2 bits to 3 for possible UNSUPPORTED future value (Conor) - Introduced vDSO function Changes in v2: - Factored the move of struct riscv_cpuinfo to its own header - Changed the interface to look more like poll(). Rather than supplying key_offset and getting back an array of values with numerically contiguous keys, have the user pre-fill the key members of the array, and the kernel will fill in the corresponding values. For any key it doesn't recognize, it will set the key of that element to -1. This allows usermode to quickly ask for exactly the elements it cares about, and not get bogged down in a back and forth about newer keys that older kernels might not recognize. In other words, the kernel can communicate that it doesn't recognize some of the keys while still providing the data for the keys it does know. - Added a shortcut to the cpuset parameters that if a size of 0 and NULL is provided for the CPU set, the kernel will use a cpu mask of all online CPUs. This is convenient because I suspect most callers will only want to act on a feature if it's supported on all CPUs, and it's a headache to dynamically allocate an array of all 1s, not to mention a waste to have the kernel loop over all of the offline bits. - Fixed logic error in if(of_property_read_string...) that caused crash - Include cpufeature.h in cpufeature.h to avoid undeclared variable warning. - Added a _MASK define - Fix random checkpatch complaints - Updated the selftests to the new API and added some more. - Fixed indentation, comments in .S, and general checkpatch complaints. Evan Green (6): RISC-V: Move struct riscv_cpuinfo to new header RISC-V: Add a syscall for HW probing RISC-V: hwprobe: Add support for RISCV_HWPROBE_BASE_BEHAVIOR_IMA RISC-V: hwprobe: Support probing of misaligned access performance selftests: Test the new RISC-V hwprobe interface RISC-V: Add hwprobe vDSO function and data Documentation/riscv/hwprobe.rst | 86 +++++++ Documentation/riscv/index.rst | 1 + arch/riscv/Kconfig | 1 + arch/riscv/errata/thead/errata.c | 10 + arch/riscv/include/asm/alternative.h | 5 + arch/riscv/include/asm/cpufeature.h | 23 ++ arch/riscv/include/asm/hwprobe.h | 13 + arch/riscv/include/asm/syscall.h | 4 + arch/riscv/include/asm/vdso/data.h | 17 ++ arch/riscv/include/asm/vdso/gettimeofday.h | 8 + arch/riscv/include/uapi/asm/hwprobe.h | 37 +++ arch/riscv/include/uapi/asm/unistd.h | 9 + arch/riscv/kernel/alternative.c | 19 ++ arch/riscv/kernel/compat_vdso/Makefile | 2 +- arch/riscv/kernel/cpu.c | 8 +- arch/riscv/kernel/cpufeature.c | 3 + arch/riscv/kernel/smpboot.c | 1 + arch/riscv/kernel/sys_riscv.c | 225 +++++++++++++++++- arch/riscv/kernel/vdso.c | 6 - arch/riscv/kernel/vdso/Makefile | 4 + arch/riscv/kernel/vdso/hwprobe.c | 52 ++++ arch/riscv/kernel/vdso/sys_hwprobe.S | 15 ++ arch/riscv/kernel/vdso/vdso.lds.S | 3 + tools/testing/selftests/Makefile | 1 + tools/testing/selftests/riscv/Makefile | 58 +++++ .../testing/selftests/riscv/hwprobe/Makefile | 10 + .../testing/selftests/riscv/hwprobe/hwprobe.c | 90 +++++++ .../selftests/riscv/hwprobe/sys_hwprobe.S | 12 + 28 files changed, 709 insertions(+), 14 deletions(-) create mode 100644 Documentation/riscv/hwprobe.rst create mode 100644 arch/riscv/include/asm/cpufeature.h create mode 100644 arch/riscv/include/asm/hwprobe.h create mode 100644 arch/riscv/include/asm/vdso/data.h create mode 100644 arch/riscv/include/uapi/asm/hwprobe.h create mode 100644 arch/riscv/kernel/vdso/hwprobe.c create mode 100644 arch/riscv/kernel/vdso/sys_hwprobe.S create mode 100644 tools/testing/selftests/riscv/Makefile create mode 100644 tools/testing/selftests/riscv/hwprobe/Makefile create mode 100644 tools/testing/selftests/riscv/hwprobe/hwprobe.c create mode 100644 tools/testing/selftests/riscv/hwprobe/sys_hwprobe.S -- 2.25.1

2 years, 3 months

3
5
0 0

[GIT PULL] Kselftest fixes update for Linux 6.3-rc5

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 6.3-rc5. This Kselftest fixes update for Linux 6.3-rc5 consists of one single fix for sigaltstack test -Wuninitialized warning found when building with clang. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 624c60f326c6e5a80b008e8a5c7feffe8c27dc72: selftests: fix LLVM build for i386 and x86_64 (2023-03-10 13:41:10 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-6.3-rc5 for you to fetch changes up to 05107edc910135d27fe557267dc45be9630bf3dd: selftests: sigaltstack: fix -Wuninitialized (2023-03-20 17:28:31 -0600) ---------------------------------------------------------------- linux-kselftest-fixes-6.3-rc5 This Kselftest fixes update for Linux 6.3-rc5 consists of one single fix for sigaltstack test -Wuninitialized warning found when building with clang. ---------------------------------------------------------------- Nick Desaulniers (1): selftests: sigaltstack: fix -Wuninitialized .../selftests/sigaltstack/current_stack_pointer.h | 23 ++++++++++++++++++++++ tools/testing/selftests/sigaltstack/sas.c | 7 +------ 2 files changed, 24 insertions(+), 6 deletions(-) create mode 100644 tools/testing/selftests/sigaltstack/current_stack_pointer. ----------------------------------------------------------------

2 years, 3 months

2
1
0 0

[PATCH] Refactor 'peeksiginfo' ptrace test part

by Ivan Orlov

peeksiginfo creates an array of 10 instances of 'siginfo_t', but actually uses only one. This patch will reduce amount of memory on the stack used by the peeksiginfo test. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> --- tools/testing/selftests/ptrace/peeksiginfo.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/testing/selftests/ptrace/peeksiginfo.c b/tools/testing/selftests/ptrace/peeksiginfo.c index 54900657eb44..a6884f66dc01 100644 --- a/tools/testing/selftests/ptrace/peeksiginfo.c +++ b/tools/testing/selftests/ptrace/peeksiginfo.c @@ -151,7 +151,7 @@ int check_direct_path(pid_t child, int shared, int nr) int main(int argc, char *argv[]) { - siginfo_t siginfo[SIGNR]; + siginfo_t siginfo; int i, exit_code = 1; sigset_t blockmask; pid_t child; @@ -176,13 +176,13 @@ int main(int argc, char *argv[]) /* Send signals in process-wide and per-thread queues */ for (i = 0; i < SIGNR; i++) { - siginfo->si_code = TEST_SICODE_SHARE; - siginfo->si_int = i; - sys_rt_sigqueueinfo(child, SIGRTMIN, siginfo); + siginfo.si_code = TEST_SICODE_SHARE; + siginfo.si_int = i; + sys_rt_sigqueueinfo(child, SIGRTMIN, &siginfo); - siginfo->si_code = TEST_SICODE_PRIV; - siginfo->si_int = i; - sys_rt_tgsigqueueinfo(child, child, SIGRTMIN, siginfo); + siginfo.si_code = TEST_SICODE_PRIV; + siginfo.si_int = i; + sys_rt_tgsigqueueinfo(child, child, SIGRTMIN, &siginfo); } if (sys_ptrace(PTRACE_ATTACH, child, NULL, NULL) == -1) -- 2.34.1

2 years, 3 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror