- Linux-kselftest-mirror - lists.linaro.org

[PATCH v4 0/5] Add IO page table replacement support

by Nicolin Chen

Changelog v4: * Rebased on top of Jason's series adding replace() and hwpt_alloc() https://lore.kernel.org/linux-iommu/0-v2-51b9896e7862+8a8c-iommufd_alloc_jg… * Rebased on top of cdev series v6 https://lore.kernel.org/kvm/20230308132903.465159-1-yi.l.liu@intel.com/ * Dropped the patch that's moved to cdev series. * Added unmap function pointer sanity before calling it. * Added "Reviewed-by" from Kevin and Yi. * Added back the VFIO change updating the ATTACH uAPI. v3: https://lore.kernel.org/linux-iommu/cover.1677288789.git.nicolinc@nvidia.co… * Rebased on top of Jason's iommufd_hwpt branch: https://lore.kernel.org/linux-iommu/0-v2-406f7ac07936+6a-iommufd_hwpt_jgg@n… * Dropped patches from this series accordingly. There were a couple of VFIO patches that will be submitted after the VFIO cdev series. Also, renamed the series to be "emulated". * Moved dma_unmap sanity patch to the first in the series. * Moved dma_unmap sanity to cover both VFIO and IOMMUFD pathways. * Added Kevin's "Reviewed-by" to two of the patches. * Fixed a NULL pointer bug in vfio_iommufd_emulated_bind(). * Moved unmap() call to the common place in iommufd_access_set_ioas(). v2: https://lore.kernel.org/linux-iommu/cover.1675802050.git.nicolinc@nvidia.co… * Rebased on top of vfio_device cdev v2 series. * Update the kdoc and commit message of iommu_group_replace_domain(). * Dropped revert-to-core-domain part in iommu_group_replace_domain(). * Dropped !ops->dma_unmap check in vfio_iommufd_emulated_attach_ioas(). * Added missing rc value in vfio_iommufd_emulated_attach_ioas() from the iommufd_access_set_ioas() call. * Added a new patch in vfio_main to deny vfio_pin/unpin_pages() calls if vdev->ops->dma_unmap is not implemented. * Added a __iommmufd_device_detach helper and let the replace routine do a partial detach(). * Added restriction on auto_domains to use the replace feature. * Added the patch "iommufd/device: Make hwpt_list list_add/del symmetric" from the has_group removal series. v1: https://lore.kernel.org/linux-iommu/cover.1675320212.git.nicolinc@nvidia.co… Hi all, The existing IOMMU APIs provide a pair of functions: iommu_attach_group() for callers to attach a device from the default_domain (NULL if not being supported) to a given iommu domain, and iommu_detach_group() for callers to detach a device from a given domain to the default_domain. Internally, the detach_dev op is deprecated for the newer drivers with default_domain. This means that those drivers likely can switch an attaching domain to another one, without stagging the device at a blocking or default domain, for use cases such as: 1) vPASID mode, when a guest wants to replace a single pasid (PASID=0) table with a larger table (PASID=N) 2) Nesting mode, when switching the attaching device from an S2 domain to an S1 domain, or when switching between relevant S1 domains. This series is rebased on top of Jason Gunthorpe's series that introduces iommu_group_replace_domain API and IOMMUFD infrastructure for the IOMMUFD "physical" devices. The IOMMUFD "emulated" deivces will need some extra steps to replace the access->ioas object and its iopt pointer. You can also find this series on Github: https://github.com/nicolinc/iommufd/commits/iommu_group_replace_domain-v4 Thank you Nicolin Chen Nicolin Chen (5): vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages() iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_SET_IOAS coverage iommufd: Add replace support in iommufd_access_set_ioas() iommufd/selftest: Add coverage for access->ioas replacement vfio: Support IO page table replacement drivers/iommu/iommufd/device.c | 17 +++++++++-- drivers/iommu/iommufd/iommufd_private.h | 1 + drivers/iommu/iommufd/iommufd_test.h | 4 +++ drivers/iommu/iommufd/selftest.c | 26 +++++++++++++---- drivers/vfio/iommufd.c | 6 ++-- drivers/vfio/vfio_main.c | 4 +++ include/uapi/linux/vfio.h | 6 ++++ tools/testing/selftests/iommu/iommufd.c | 29 +++++++++++++++++-- tools/testing/selftests/iommu/iommufd_utils.h | 22 ++++++++++++-- 9 files changed, 101 insertions(+), 14 deletions(-) -- 2.39.2

2 years, 3 months

3
13
0 0

Re: [PATCH 2/8] of: Enable DTB loading on UML for KUnit tests

by David Gow

On Sat, 11 Mar 2023 at 07:34, Stephen Boyd <sboyd(a)kernel.org> wrote: > > Quoting David Gow (2023-03-10 00:09:48) > > On Fri, 10 Mar 2023 at 07:19, Stephen Boyd <sboyd(a)kernel.org> wrote: > > > > > > > > > Hmm. I think you're suggesting that the unit test data be loaded > > > whenever CONFIG_OF=y and CONFIG_KUNIT=y. Then tests can check for > > > CONFIG_OF and skip if it isn't enabled? > > > > > > > More of the opposite: that we should have some way of supporting tests > > which might want to use a DTB other than the built-in one. Mostly for > > non-UML situations where an actual devicetree is needed to even boot > > far enough to get test output (so we wouldn't be able to override it > > with a compiled-in test one). > > Ok, got it. > > > > > I think moving to overlays probably will render this idea obsolete: > > but the thought was to give test code a way to check for the required > > devicetree nodes at runtime, and skip the test if they weren't found. > > That way, the failure mode for trying to boot this on something which > > required another device tree for, e.g., serial, would be "these tests > > are skipped because the wrong device tree is loaded", not "I get no > > output because serial isn't working". > > > > Again, though, it's only really needed for non-UML, and just loading > > overlays as needed should be much more sensible anyway. > > I still have one niggle here. Loading overlays requires > CONFIG_OF_OVERLAY, and the overlay loading API returns -ENOTSUPP when > CONFIG_OF_OVERLAY=n. For now I'm checking for the config being enabled > in each test, but I'm thinking it may be better to simply call > kunit_skip() from the overlay loading function if the config is > disabled. This way tests can simply call the overlay loading function > and we'll halt the test immediately if the config isn't enabled. > That sounds sensible, though there is a potential pitfall. If kunit_skip() is called directly from overlay code, might introduce a dependency on kunit.ko from the DT overlay, which we might not want. The solution there is either to have a kunit wrapper function (so the call is already in kunit.ko), or to have a hook to skip the current test (which probably makes sense to do anyway, but I think the wrapper is the better option). > > > > > > > > > > That being said, I do think that there's probably some sense in > > > > supporting the compiled-in DTB as well (it's definitely simpler than > > > > patching kunit.py to always pass the extra command-line option in, for > > > > example). > > > > But maybe it'd be nice to have the command-line option override the > > > > built-in one if present. > > > > > > Got it. I need to test loading another DTB on the commandline still, but > > > I think this won't be a problem. We'll load the unittest-data DTB even > > > with KUnit on UML, so assuming that works on UML right now it should be > > > unchanged by this series once I resend. > > > > Again, moving to overlays should render this mostly obsolete, no? Or > > am I misunderstanding how the overlay stuff will work? > > Right, overlays make it largely a moot issue. The way the OF unit tests > work today is by grafting a DTB onto the live tree. I'm reusing that > logic to graft a container node target for kunit tests to add their > overlays too. It will be clearer once I post v2. > > > > > One possible future advantage of being able to test with custom DTs at > > boot time would be for fuzzing (provide random DT properties, see what > > happens in the test). We've got some vague plans to support a way of > > passing custom data to tests to support this kind of case (though, if > > we're using overlays, maybe the test could just patch those if we > > wanted to do that). > > Ah ok. I can see someone making a fuzzer that modifies devicetree > properties randomly, e.g. using different strings for clock-names. > > This reminds me of another issue I ran into. I wanted to test adding the > same platform device to the platform bus twice to confirm that the > second device can't be added. That prints a warning, which makes > kunit.py think that the test has failed because it printed a warning. Is > there some way to avoid that? I want something like > > KUNIT_EXPECT_WARNING(test, <call some function>) > > so I can test error cases. Hmm... I'd've thought that shouldn't be a problem: kunit.py should ignore most messages during a test, unless it can't find a valid result line. What does the raw KTAP output look like? (You can get it from kunit.py by passing the --raw_output option). That being said, a KUNIT_EXPECT_LOG_MESSAGE() or similar is something we've wanted for a while. I think that the KASAN folks have been working on something similar using console tracepoints: https://lore.kernel.org/all/ebf96ea600050f00ed567e80505ae8f242633640.166611… Cheers, -- David

2 years, 3 months

2
6
0 0

[PATCH] kunit: Use gfp in kunit_alloc_resource() kernel-doc

by Stephen Boyd

Copy/pasting the code from the kernel-doc here doesn't compile because kunit_alloc_resource() takes a gfp flags argument. Pass the gfp argument from the caller to complete the example. Signed-off-by: Stephen Boyd <sboyd(a)kernel.org> --- include/kunit/resource.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/kunit/resource.h b/include/kunit/resource.h index cf6fb8f2ac1b..c0d88b318e90 100644 --- a/include/kunit/resource.h +++ b/include/kunit/resource.h @@ -72,7 +72,7 @@ typedef void (*kunit_resource_free_t)(struct kunit_resource *); * params.gfp = gfp; * * return kunit_alloc_resource(test, kunit_kmalloc_init, - * kunit_kmalloc_free, &params); + * kunit_kmalloc_free, gfp, &params); * } * * Resources can also be named, with lookup/removal done on a name base-commit: fe15c26ee26efa11741a7b632e9f23b01aca4cc6 -- https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/ https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

2 years, 3 months

2
1
0 0

[PATCH rcu 0/8] RCU torture test and tool updates for v6.4

by Boqun Feng

Hi, This series contains changes for rcutorture and rcu-related tool, which are targeted for v6.4. This is my first time helping prepare PRs, so please take a careful look and yell at me if there is something wrong. Thanks a lot! You will also be able to find the series at: https://github/fbq/linux rcu/rcutorture.2023.03.11a top commit is: 015d88635382 List of changes: Bhaskar Chowdhury (1): tools: rcu: Add usage function and check for argument Paul E. McKenney (5): rcutorture: Add test_nmis module parameter rcutorture: Set CONFIG_BOOTPARAM_HOTPLUG_CPU0 to offline CPU 0 rcutorture: Make scenario TREE04 enable lazy call_rcu() torture: Permit kvm-again.sh --duration to default to previous run torture: Enable clocksource watchdog with "tsc=watchdog" Yue Hu (1): rcutorture: Eliminate variable n_rcu_torture_boost_rterror Zqiang (1): rcutorture: Create nocb kthreads only when testing rcu in CONFIG_RCU_NOCB_CPU=y kernels kernel/rcu/rcutorture.c | 49 +++++++++++++++---- tools/rcu/extract-stall.sh | 26 +++++++--- .../selftests/rcutorture/bin/kvm-again.sh | 2 +- .../selftests/rcutorture/bin/torture.sh | 6 +-- .../selftests/rcutorture/configs/rcu/TREE01 | 1 + .../selftests/rcutorture/configs/rcu/TREE04 | 1 + 6 files changed, 65 insertions(+), 20 deletions(-) mode change 100644 => 100755 tools/rcu/extract-stall.sh -- 2.39.2

2 years, 3 months

1
8
0 0

[GIT PULL] Kselftest fixes update for Linux 6.3-rc3

by Shuah Khan

Hi Linus, Please pull the following Kselftest fixes update for Linux 6.3-rc3. This kselftest fixes update for Linux 6.3-rc3 consists of a fix to amd-pstate test Makefile and a fix to LLVM build for i386 and x86_64 in kselftest common lib.mk. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6: Linux 6.3-rc1 (2023-03-05 14:52:03 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux-kselftest-fixes-6.3-rc3 for you to fetch changes up to 624c60f326c6e5a80b008e8a5c7feffe8c27dc72: selftests: fix LLVM build for i386 and x86_64 (2023-03-10 13:41:10 -0700) ---------------------------------------------------------------- linux-kselftest-fixes-6.3-rc3 This kselftest fixes update for Linux 6.3-rc3 consists of a fix to amd-pstate test Makefile and a fix to LLVM build for i386 and x86_64 in kselftest common lib.mk. ---------------------------------------------------------------- Guillaume Tucker (2): selftests: amd-pstate: fix TEST_FILES selftests: fix LLVM build for i386 and x86_64 tools/testing/selftests/amd-pstate/Makefile | 13 +++++++++---- tools/testing/selftests/lib.mk | 2 ++ 2 files changed, 11 insertions(+), 4 deletions(-) ----------------------------------------------------------------

2 years, 3 months

2
1
0 0

[PATCH v2 09/14] torture: Enable clocksource watchdog with "tsc=watchdog"

by Joel Fernandes (Google)

From: "Paul E. McKenney" <paulmck(a)kernel.org> This commit tests the "tsc=watchdog" kernel boot parameter when running the clocksourcewd torture tests. Signed-off-by: Paul E. McKenney <paulmck(a)kernel.org> Signed-off-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> --- tools/testing/selftests/rcutorture/bin/torture.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/rcutorture/bin/torture.sh b/tools/testing/selftests/rcutorture/bin/torture.sh index 130d0de4c3bb..5a2ae2264403 100755 --- a/tools/testing/selftests/rcutorture/bin/torture.sh +++ b/tools/testing/selftests/rcutorture/bin/torture.sh @@ -497,16 +497,16 @@ fi if test "$do_clocksourcewd" = "yes" then - torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000" + torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 tsc=watchdog" torture_set "clocksourcewd-1" tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 45s --configs TREE03 --kconfig "CONFIG_TEST_CLOCKSOURCE_WATCHDOG=y" --trust-make - torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 clocksource.max_cswd_read_retries=1" + torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 clocksource.max_cswd_read_retries=1 tsc=watchdog" torture_set "clocksourcewd-2" tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 45s --configs TREE03 --kconfig "CONFIG_TEST_CLOCKSOURCE_WATCHDOG=y" --trust-make # In case our work is already done... if test "$do_rcutorture" != "yes" then - torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000" + torture_bootargs="rcupdate.rcu_cpu_stall_suppress_at_boot=1 torture.disable_onoff_at_boot rcupdate.rcu_task_stall_timeout=30000 tsc=watchdog" torture_set "clocksourcewd-3" tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 45s --configs TREE03 --trust-make fi fi -- 2.40.0.rc1.284.g88254d51c5-goog

2 years, 3 months

1
0
0 0

BUG in dhrystone selftest on v6.3-rc1

by Tobias Klausmann

Hey, just ran the new Dhrystone test on one of my machines post-boot (using echo y > /sys/module/test_dhry/parameters/run) and: BUG: using smp_processor_id() in preemptible [00000000] code: bash/1903 caller is dhry_benchmark+0x39/0x90 CPU: 5 PID: 1903 Comm: bash Not tainted 6.3.0-rc1 #13 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450 Pro4 R2.0, BIOS H4.84 04/08/2021 Call Trace: <TASK> dump_stack_lvl+0x32/0x50 check_preemption_disabled+0xe6/0x100 dhry_benchmark+0x39/0x90 dhry_run_set+0x33/0x40 param_attr_store+0x98/0x100 module_attr_store+0x18/0x30 kernfs_fop_write_iter+0x14e/0x220 vfs_write+0x29a/0x460 ksys_write+0x74/0x100 do_syscall_64+0x3a/0xc0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f5eec252190 Code: 40 00 48 8b 15 71 9c 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d 51 24 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 RSP: 002b:00007ffc4b1dea68 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5eec252190 RDX: 0000000000000002 RSI: 000055d3c05b4540 RDI: 0000000000000001 RBP: 000055d3c05b4540 R08: 00007f5eec32d3d0 R09: 00007f5eec32d3d0 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002 R13: 00007f5eec32d760 R14: 0000000000000002 R15: 00007f5eec3289e0 </TASK> CPU5: Dhrystones per Second: 34361907 (19557 DMIPS) Test completes fine (with a credible result) and the machine keeps running. If any additional info is needed, lmk. Note that I'm not subscribe to the list, so please CC me. Best, Tobias

2 years, 3 months

2
2
0 0

[PATCH] lib: dhry: Fix unstable smp_processor_id(_) usage

by Geert Uytterhoeven

When running the in-kernel Dhrystone benchmark with CONFIG_DEBUG_PREEMPT=y: BUG: using smp_processor_id() in preemptible [00000000] code: bash/938 Fix this by not using smp_processor_id() directly, but instead wrapping the whole benchmark inside a get_cpu()/put_cpu() pair. This makes sure the whole benchmark is run on the same CPU core, and the reported values are consistent. Fixes: d5528cc16893f1f6 ("lib: add Dhrystone benchmark test") Reported-by: Tobias Klausmann <klausman(a)schwarzvogel.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217179 Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- lib/dhry_run.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/dhry_run.c b/lib/dhry_run.c index f9d33efa6d090604..f15ac666e9d38bd2 100644 --- a/lib/dhry_run.c +++ b/lib/dhry_run.c @@ -31,6 +31,7 @@ MODULE_PARM_DESC(iterations, static void dhry_benchmark(void) { + unsigned int cpu = get_cpu(); int i, n; if (iterations > 0) { @@ -45,9 +46,10 @@ static void dhry_benchmark(void) } report: + put_cpu(); if (n >= 0) - pr_info("CPU%u: Dhrystones per Second: %d (%d DMIPS)\n", - smp_processor_id(), n, n / DHRY_VAX); + pr_info("CPU%u: Dhrystones per Second: %d (%d DMIPS)\n", cpu, + n, n / DHRY_VAX); else if (n == -EAGAIN) pr_err("Please increase the number of iterations\n"); else -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH] selftests/ftrace: Update comment and clean up

by paranlee

Update renamed function comment and clean up indent from 4 space to tab. Signed-off-by: Paran Lee <p4ranlee(a)gmail.com> --- .../testing/selftests/ftrace/test.d/functions | 202 +++++++++--------- 1 file changed, 101 insertions(+), 101 deletions(-) diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 779f3e62ec90..d0946cccb8f0 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -1,195 +1,195 @@ clear_trace() { # reset trace output - echo > trace + echo > trace } disable_tracing() { # stop trace recording - echo 0 > tracing_on + echo 0 > tracing_on } enable_tracing() { # start trace recording - echo 1 > tracing_on + echo 1 > tracing_on } reset_tracer() { # reset the current tracer - echo nop > current_tracer + echo nop > current_tracer } reset_trigger_file() { - # remove action triggers first - grep -H ':on[^:]*(' $@ | - while read line; do - cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` + # remove action triggers first + grep -H ':on[^:]*(' $@ | + while read line; do + cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` file=`echo $line | cut -f1 -d:` echo "!$cmd" >> $file - done - grep -Hv ^# $@ | - while read line; do - cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` + done + grep -Hv ^# $@ | + while read line; do + cmd=`echo $line | cut -f2- -d: | cut -f1 -d"["` file=`echo $line | cut -f1 -d:` echo "!$cmd" > $file - done + done } reset_trigger() { # reset all current setting triggers - if [ -d events/synthetic ]; then - reset_trigger_file events/synthetic/*/trigger - fi - reset_trigger_file events/*/*/trigger + if [ -d events/synthetic ]; then + reset_trigger_file events/synthetic/*/trigger + fi + reset_trigger_file events/*/*/trigger } reset_events_filter() { # reset all current setting filters - grep -v ^none events/*/*/filter | - while read line; do + grep -v ^none events/*/*/filter | + while read line; do echo 0 > `echo $line | cut -f1 -d:` - done + done } reset_ftrace_filter() { # reset all triggers in set_ftrace_filter - if [ ! -f set_ftrace_filter ]; then - return 0 - fi - echo > set_ftrace_filter - grep -v '^#' set_ftrace_filter | while read t; do + if [ ! -f set_ftrace_filter ]; then + return 0 + fi + echo > set_ftrace_filter + grep -v '^#' set_ftrace_filter | while read t; do tr=`echo $t | cut -d: -f2` if [ "$tr" = "" ]; then - continue + continue fi if ! grep -q "$t" set_ftrace_filter; then continue; fi name=`echo $t | cut -d: -f1 | cut -d' ' -f1` if [ $tr = "enable_event" -o $tr = "disable_event" ]; then - tr=`echo $t | cut -d: -f2-4` - limit=`echo $t | cut -d: -f5` + tr=`echo $t | cut -d: -f2-4` + limit=`echo $t | cut -d: -f5` else - tr=`echo $t | cut -d: -f2` - limit=`echo $t | cut -d: -f3` + tr=`echo $t | cut -d: -f2` + limit=`echo $t | cut -d: -f3` fi if [ "$limit" != "unlimited" ]; then - tr="$tr:$limit" + tr="$tr:$limit" fi echo "!$name:$tr" > set_ftrace_filter - done + done } disable_events() { - echo 0 > events/enable + echo 0 > events/enable } clear_synthetic_events() { # reset all current synthetic events - grep -v ^# synthetic_events | - while read line; do - echo "!$line" >> synthetic_events - done + grep -v ^# synthetic_events | + while read line; do + echo "!$line" >> synthetic_events + done } clear_dynamic_events() { # reset all current dynamic events - again=1 - stop=1 - # loop mulitple times as some events require other to be removed first - while [ $again -eq 1 ]; do + again=1 + stop=1 + # loop mulitple times as some events require other to be removed first + while [ $again -eq 1 ]; do stop=$((stop+1)) # Prevent infinite loops if [ $stop -gt 10 ]; then - break; + break; fi again=2 grep -v '^#' dynamic_events| while read line; do - del=`echo $line | sed -e 's/^.$[^ ]*$.*/-\1/'` - if ! echo "$del" >> dynamic_events; then + del=`echo $line | sed -e 's/^.$[^ ]*$.*/-\1/'` + if ! echo "$del" >> dynamic_events; then again=1 - fi + fi + done done - done } initialize_ftrace() { # Reset ftrace to initial-state # As the initial state, ftrace will be set to nop tracer, # no events, no triggers, no filters, no function filters, # no probes, and tracing on. - disable_tracing - reset_tracer - reset_trigger - reset_events_filter - reset_ftrace_filter - disable_events - clear_dynamic_events - [ -f set_event_pid ] && echo > set_event_pid - [ -f set_ftrace_pid ] && echo > set_ftrace_pid - [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace - [ -f set_graph_function ] && echo | tee set_graph_* - [ -f stack_trace_filter ] && echo > stack_trace_filter - [ -f kprobe_events ] && echo > kprobe_events - [ -f uprobe_events ] && echo > uprobe_events - [ -f synthetic_events ] && echo > synthetic_events - [ -f snapshot ] && echo 0 > snapshot + disable_tracing + reset_tracer + reset_trigger + reset_events_filter + reset_ftrace_filter + disable_events + clear_dynamic_events + [ -f set_event_pid ] && echo > set_event_pid + [ -f set_ftrace_pid ] && echo > set_ftrace_pid + [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace + [ -f set_graph_function ] && echo | tee set_graph_* + [ -f stack_trace_filter ] && echo > stack_trace_filter + [ -f kprobe_events ] && echo > kprobe_events + [ -f uprobe_events ] && echo > uprobe_events + [ -f synthetic_events ] && echo > synthetic_events + [ -f snapshot ] && echo 0 > snapshot # Stop tracing while reading the trace file by default, to prevent # the test results while checking it and to avoid taking a long time # to check the result. - [ -f options/pause-on-trace ] && echo 1 > options/pause-on-trace + [ -f options/pause-on-trace ] && echo 1 > options/pause-on-trace - clear_trace - enable_tracing + clear_trace + enable_tracing } finish_ftrace() { - initialize_ftrace + initialize_ftrace # And recover it to default. - [ -f options/pause-on-trace ] && echo 0 > options/pause-on-trace + [ -f options/pause-on-trace ] && echo 0 > options/pause-on-trace } check_requires() { # Check required files and tracers - for i in "$@" ; do + for i in "$@" ; do p=${i%:program} - r=${i%:README} - t=${i%:tracer} + r=${i%:README} + t=${i%:tracer} if [ $p != $i ]; then - if ! which $p ; then - echo "Required program $p is not found." - exit_unresolved - fi - elif [ $t != $i ]; then - if ! grep -wq $t available_tracers ; then - echo "Required tracer $t is not configured." - exit_unsupported - fi - elif [ "$r" != "$i" ]; then - if ! grep -Fq "$r" README ; then - echo "Required feature pattern \"$r\" is not in README." - exit_unsupported - fi - elif [ ! -e $i ]; then - echo "Required feature interface $i doesn't exist." - exit_unsupported - fi - done + if ! which $p ; then + echo "Required program $p is not found." + exit_unresolved + fi + elif [ $t != $i ]; then + if ! grep -wq $t available_tracers ; then + echo "Required tracer $t is not configured." + exit_unsupported + fi + elif [ "$r" != "$i" ]; then + if ! grep -Fq "$r" README ; then + echo "Required feature pattern \"$r\" is not in README." + exit_unsupported + fi + elif [ ! -e $i ]; then + echo "Required feature interface $i doesn't exist." + exit_unsupported + fi + done } LOCALHOST=127.0.0.1 yield() { - ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1 + ping $LOCALHOST -c 1 || sleep .001 || usleep 1 || sleep 1 } # The fork function in the kernel was renamed from "_do_fork" to -# "kernel_fork". As older tests should still work with older kernels +# "kernel_clone". As older tests should still work with older kernels # as well as newer kernels, check which version of fork is used on this # kernel so that the tests can use the fork function for the running kernel. FUNCTION_FORK=`(if grep '\bkernel_clone\b' /proc/kallsyms > /dev/null; then - echo kernel_clone; else echo '_do_fork'; fi)` + echo kernel_clone; else echo '_do_fork'; fi)` # Since probe event command may include backslash, explicitly use printf "%s" # to NOT interpret it. ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file - pos=$(printf "%s" "${2%^*}" | wc -c) # error position - command=$(printf "%s" "$2" | tr -d ^) - echo "Test command: $command" - echo > error_log - (! printf "%s" "$command" >> "$3" ) 2> /dev/null - grep "$1: error:" -A 3 error_log - N=$(tail -n 1 error_log | wc -c) - # " Command: " and "^\n" => 13 - test $(expr 13 + $pos) -eq $N + pos=$(printf "%s" "${2%^*}" | wc -c) # error position + command=$(printf "%s" "$2" | tr -d ^) + echo "Test command: $command" + echo > error_log + (! printf "%s" "$command" >> "$3" ) 2> /dev/null + grep "$1: error:" -A 3 error_log + N=$(tail -n 1 error_log | wc -c) + # " Command: " and "^\n" => 13 + test $(expr 13 + $pos) -eq $N } -- 2.34.1

2 years, 3 months

3
3
0 0

[PATCHv2] selftests: net: devlink_port_split.py: skip test if no suitable device available

by Po-Hsu Lin

The `devlink -j port show` command output may not contain the "flavour" key, an example from s390x LPAR with Ubuntu 22.10 (5.19.0-37-generic), iproute2-5.15.0: {"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"}, "pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"}, "pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"}, "pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}} This will cause a KeyError exception. Create a validate_devlink_output() to check for this "flavour" from devlink command output to avoid this KeyError exception. Also let it handle the check for `devlink -j dev show` output in main(). Apart from this, if the test was not started because of any reason (e.g. "lanes" does not exist, max lanes is 0 or the flavour of the designated device is not "physical" and etc.) The script will still return 0 and thus causing a false-negative test result. Use a test_ran flag to determine if these tests were skipped and return KSFT_SKIP to make it more clear. V2: factor out the skip logic from main(), update commit message and skip reasons accordingly. Link: https://bugs.launchpad.net/bugs/1937133 Fixes: f3348a82e727 ("selftests: net: Add port split test") Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/net/devlink_port_split.py | 36 +++++++++++++++++++---- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/net/devlink_port_split.py b/tools/testing/selftests/net/devlink_port_split.py index 2b5d6ff..749606c 100755 --- a/tools/testing/selftests/net/devlink_port_split.py +++ b/tools/testing/selftests/net/devlink_port_split.py @@ -59,6 +59,8 @@ class devlink_ports(object): assert stderr == "" ports = json.loads(stdout)['port'] + validate_devlink_output(ports, 'flavour') + for port in ports: if dev in port: if ports[port]['flavour'] == 'physical': @@ -220,6 +222,27 @@ def split_splittable_port(port, k, lanes, dev): unsplit(port.bus_info) +def validate_devlink_output(devlink_data, target_property=None): + """ + Determine if test should be skipped by checking: + 1. devlink_data contains values + 2. The target_property exist in devlink_data + """ + skip_reason = None + if any(devlink_data.values()): + if target_property: + skip_reason = "{} not found in devlink output, test skipped".format(target_property) + for key in devlink_data: + if target_property in devlink_data[key]: + skip_reason = None + else: + skip_reason = 'devlink output is empty, test skipped' + + if skip_reason: + print(skip_reason) + sys.exit(KSFT_SKIP) + + def make_parser(): parser = argparse.ArgumentParser(description='A test for port splitting.') parser.add_argument('--dev', @@ -231,6 +254,7 @@ def make_parser(): def main(cmdline=None): + test_ran = False parser = make_parser() args = parser.parse_args(cmdline) @@ -240,12 +264,9 @@ def main(cmdline=None): stdout, stderr = run_command(cmd) assert stderr == "" + validate_devlink_output(json.loads(stdout)) devs = json.loads(stdout)['dev'] - if devs: - dev = list(devs.keys())[0] - else: - print("no devlink device was found, test skipped") - sys.exit(KSFT_SKIP) + dev = list(devs.keys())[0] cmd = "devlink dev show %s" % dev stdout, stderr = run_command(cmd) @@ -277,6 +298,11 @@ def main(cmdline=None): split_splittable_port(port, lane, max_lanes, dev) lane //= 2 + test_ran = True + + if not test_ran: + print("Test not started, no suitable device for the test") + sys.exit(KSFT_SKIP) if __name__ == "__main__": -- 2.7.4

2 years, 3 months

3
11
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror