- Linux-kselftest-mirror - lists.linaro.org

[PATCH v3 0/4] KVM: arm64: selftests: arch_timer_edge_cases fixes

by Sebastian Ott

Some small fixes for arch_timer_edge_cases that I stumbled upon while debugging failures for this selftest on ampere-one. Changes since v1: * determine effective counter width based on suggestions from Marc Changes since v2: * new patch to fix xval initialization I've done tests with this on various machines - no issues during several hundreds of test runs. v1: https://lore.kernel.org/kvmarm/20250509143312.34224-1-sebott@redhat.com/ v2: https://lore.kernel.org/kvmarm/20250527142434.25209-1-sebott@redhat.com/ Sebastian Ott (4): KVM: arm64: selftests: fix help text for arch_timer_edge_cases KVM: arm64: selftests: fix thread migration in arch_timer_edge_cases KVM: arm64: selftests: arch_timer_edge_cases - fix xval init KVM: arm64: selftests: arch_timer_edge_cases - determine effective counter width .../kvm/arm64/arch_timer_edge_cases.c | 39 ++++++++++++------- 1 file changed, 25 insertions(+), 14 deletions(-) base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca -- 2.49.0

3 months

3
7
0 0

[PATCH v17 net-next 0/5] DUALPI2 patch

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the DualPI2 patch v17. This patch serise adds DualPI Improved with a Square (DualPI2) with following features: * Supports congestion controls that comply with the Prague requirements in RFC9331 (e.g. TCP-Prague) * Coupled dual-queue that separates the L4S traffic in a low latency queue (L-queue), without harming remaining traffic that is scheduled in classic queue (C-queue) due to congestion-coupling using PI2 as defined in RFC9332 * Configurable overload strategies * Use of sojourn time to reliably estimate queue delay * Supports ECN L4S-identifier (IP.ECN==0b*1) to classify traffic into respective queues For more details of DualPI2, please refer IETF RFC9332 (https://datatracker.ietf.org/doc/html/rfc9332). Best regards, Chia-Yu --- v17 (25-May-2025, Resent at 10-Jun-2025) - Replace 0xffffffff with U32_MAX (Paolo Abeni <pabeni(a)redhat.com>) - Use helper function qdisc_dequeue_internal() and add new helper function skb_apply_step() (Paolo Abeni <pabeni(a)redhat.com>) - Add s64 casting when calculating the delta of the PI controller (Paolo Abeni <pabeni(a)redhat.com>) - Change the drop reason into SKB_DROP_REASON_QDISC_CONGESTED for drop_early (Paolo Abeni <pabeni(a)redhat.com>) - Modify the condition to remove the original skb when enqueuing multiple GSO segments (Paolo Abeni <pabeni(a)redhat.com>) - Add READ_ONCE() in dualpi2_dump_stat() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments, brackets, and brackets for readability (Paolo Abeni <pabeni(a)redhat.com>) v16 (16-MAy-2025) - Add qdisc_lock() to dualpi2_timer() in dualpi2_timer (Paolo Abeni <pabeni(a)redhat.com>) - Introduce convert_ns_to_usec() to convert usec to nsec without overflow in #1 (Paolo Abeni <pabeni(a)redhat.com>) - Update convert_us_tonsec() to convert nsec to usec without overflow in #2 (Paolo Abeni <pabeni(a)redhat.com>) - Add more descriptions with respect to DualPI2 in the cover ltter and add changelog in each patch (Paolo Abeni <pabeni(a)redhat.com>) v15 (09-May-2025) - Add enum of TCA_DUALPI2_ECN_MASK_CLA_ECT to remove potential leakeage in #1 (Simon Horman <horms(a)kernel.org>) - Fix one typo in comment of #2 - Update tc.yaml in #5 to aligh with the updated enum of pkt_sched.h v14 (05-May-2025) - Modify tc.yaml: (1) Replace flags with enum and remove enum-as-flags, (2) Remove credit-queue in xstats, and (3) Change attribute types (Donald Hunter <donald.hun - Add enum and fix the ordering of variables in pkt_sched.h to align with the modified tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add validators for DROP_OVERLOAD, DROP_EARLY, ECN_MASK, and SPLIT_GSO in sch_dualpi2.c (Donald Hunter <donald.hunter(a)gmail.com>) - Update dualpi2.json to align with the updated variable order in pkt_sched.h - Reorder patches (Donald Hunter <donald.hunter(a)gmail.com>) v13 (26-Apr-2025) - Use dashes in member names to follow YNL conventions in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Define enumerations separately for flags of drop-early, drop-overload, ecn-mask, credit-queue in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Change the types of split-gso and step-packets into flag in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Revert to u32/u8 types for tc-dualpi2-xstats members in tc.yaml (Donald Hunter <donald.hunter(a)gmail.com>) - Add new test cases in tc-tests/qdiscs/dualpi2.json to cover all dualpi2 parameters (Donald Hunter <donald.hunter(a)gmail.com>) - Change the type of TCA_DUALPI2_STEP_PACKETS into NLA_FLAG (Donald Hunter <donald.hunter(a)gmail.com>) v12 (22-Apr-2025) - Remove anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Replace u32/u8 with uint and s32 with int in tc spec document (Paolo Abeni <pabeni(a)redhat.com>) - Introduce get_memory_limit function to handle potential overflow when multipling limit with MTU (Paolo Abeni <pabeni(a)redhat.com>) - Double the packet length to further include packet overhead in memory_limit (Paolo Abeni <pabeni(a)redhat.com>) - Remove the check of qdisc_qlen(sch) when calling qdisc_tree_reduce_backlog (Paolo Abeni <pabeni(a)redhat.com>) v11 (15-Apr-2025) - Replace hstimer_init with hstimer_setup in sch_dualpi2.c v10 (25-Mar-2025) - Remove leftover include in include/linux/netdevice.h and anonymous struct in sch_dualpi2.c (Paolo Abeni <pabeni(a)redhat.com>) - Use kfree_skb_reason() and add SKB_DROP_REASON_DUALPI2_STEP_DROP drop reason (Paolo Abeni <pabeni(a)redhat.com>) - Split sch_dualpi2.c into 3 patches (and overall 5 patches): Struct definition & parsing, Dump stats & configuration, Enqueue/Dequeue (Paolo Abeni <pabeni(a)redhat.com>) v9 (16-Mar-2025) - Fix mem_usage error in previous version - Add min_qlen_step to the dualpi2 attribute as the minimum queue length in number of packets in the L-queue to start step threshold marking. In previous versions, this value was fixed to 2, so the step threshold was applied to mark packets in the L queue only when the queue length of the L queue was greater than or equal to 2 packets. This will cause larger queuing delays for L4S traffic at low rates (<20Mbps). So we parameterize it and change the default value to 0. Comparison of tcp_1down run 'HTB 20Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 11.55 11.70 ms 350 TCP upload avg : 18.96 N/A Mbits/s 350 TCP upload sum : 18.96 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 10.81 10.70 ms 350 TCP upload avg : 18.91 N/A Mbits/s 350 TCP upload sum : 18.91 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 12.61 12.80 ms 350 TCP upload avg : 9.48 N/A Mbits/s 350 TCP upload sum : 9.48 N/A Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.06 10.80 ms 350 TCP upload avg : 9.43 N/A Mbits/s 350 TCP upload sum : 9.43 N/A Mbits/s 350 Comparison of tcp_1down run 'HTB 10Mbit + DUALPI2 + 10ms base delay' Old versions: avg median # data pts Ping (ms) ICMP : 40.86 37.45 ms 350 TCP upload avg : 0.88 N/A Mbits/s 350 TCP upload sum : 0.88 N/A Mbits/s 350 TCP upload::1 : 0.88 0.97 Mbits/s 350 New version (v9): avg median # data pts Ping (ms) ICMP : 11.07 10.40 ms 350 TCP upload avg : 0.55 N/A Mbits/s 350 TCP upload sum : 0.55 N/A Mbits/s 350 TCP upload::1 : 0.55 0.59 Mbits/s 350 v8 (11-Mar-2025) - Fix warning messages in v7 v7 (07-Mar-2025) - Separate into 3 patches to avoid mixing changes of documentation, selftest, and code. (Cong Wang <xiyou.wangcong(a)gmail.com>) v6 (04-Mar-2025) - Add modprobe for dulapi2 in tc-testing script tc-testing/tdc.sh (Jakub Kicinski <kuba(a)kernel.org>) - Update test cases in dualpi2.json - Update commit message v5 (22-Feb-2025) - A comparison was done between MQ + DUALPI2, MQ + FQ_PIE, MQ + FQ_CODEL: Unshaped 1gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 - Summary of tcp_4down run 'MQ + FQ_PIE' avg median # data pts Ping (ms) ICMP : 1.21 1.37 ms 350 TCP download avg : 235.42 N/A Mbits/s 350 TCP download sum : 941.61 N/A Mbits/s 350 TCP download::1 : 232.54 233.13 Mbits/s 350 TCP download::2 : 232.52 232.80 Mbits/s 350 TCP download::3 : 233.14 233.78 Mbits/s 350 TCP download::4 : 243.41 241.48 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2' avg median # data pts Ping (ms) ICMP : 1.19 1.34 ms 349 TCP download avg : 235.42 N/A Mbits/s 349 TCP download sum : 941.68 N/A Mbits/s 349 TCP download::1 : 235.19 235.39 Mbits/s 349 TCP download::2 : 235.03 235.35 Mbits/s 349 TCP download::3 : 236.89 235.44 Mbits/s 349 TCP download::4 : 234.57 235.19 Mbits/s 349 Unshaped 1gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 1.88 1.86 ms 350 TCP download avg : 7.39 N/A Mbits/s 350 TCP download sum : 946.47 N/A Mbits/s 350 Unshaped 10gigE with 4 download streams test: - Summary of tcp_4down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 0.22 0.23 ms 350 TCP download avg : 2354.08 N/A Mbits/s 350 TCP download sum : 9416.31 N/A Mbits/s 350 TCP download::1 : 2353.65 2352.81 Mbits/s 350 TCP download::2 : 2354.54 2354.21 Mbits/s 350 TCP download::3 : 2353.56 2353.78 Mbits/s 350 TCP download::4 : 2354.56 2354.45 Mbits/s 350 - Summary of tcp_4down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 0.20 0.19 ms 350 TCP download avg : 2354.76 N/A Mbits/s 350 TCP download sum : 9419.04 N/A Mbits/s 350 TCP download::1 : 2354.77 2353.89 Mbits/s 350 TCP download::2 : 2353.41 2354.29 Mbits/s 350 TCP download::3 : 2356.18 2354.19 Mbits/s 350 TCP download::4 : 2354.68 2353.15 Mbits/s 350 - Summary of tcp_4down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 0.24 0.24 ms 350 TCP download avg : 2354.11 N/A Mbits/s 350 TCP download sum : 9416.43 N/A Mbits/s 350 TCP download::1 : 2354.75 2353.93 Mbits/s 350 TCP download::2 : 2353.15 2353.75 Mbits/s 350 TCP download::3 : 2353.49 2353.72 Mbits/s 350 TCP download::4 : 2355.04 2353.73 Mbits/s 350 Unshaped 10gigE with 128 download streams test: - Summary of tcp_128down run 'MQ + FQ_CODEL': avg median # data pts Ping (ms) ICMP : 7.57 8.69 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9467.82 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + FQ_PIE': avg median # data pts Ping (ms) ICMP : 7.82 8.91 ms 350 TCP download avg : 73.97 N/A Mbits/s 350 TCP download sum : 9468.42 N/A Mbits/s 350 - Summary of tcp_128down run 'MQ + DUALPI2': avg median # data pts Ping (ms) ICMP : 6.87 7.93 ms 350 TCP download avg : 73.95 N/A Mbits/s 350 TCP download sum : 9465.87 N/A Mbits/s 350 From the results shown above, we see small differences between combinations. - Update commit message to include results of no_split_gso and split_gso (Dave Taht <dave.taht(a)gmail.com> and Paolo Abeni <pabeni(a)redhat.com>) - Add memlimit in the dualpi2 attribute, and add memory_used, max_memory_used, memory_limit in dualpi2 stats (Dave Taht <dave.taht(a)gmail.com>) - Update note in sch_dualpi2.c related to BBRv3 status (Dave Taht <dave.taht(a)gmail.com>) - Update license identifier (Dave Taht <dave.taht(a)gmail.com>) - Add selftest in tools/testing/selftests/tc-testing (Cong Wang <xiyou.wangcong(a)gmail.com>) - Use netlink policies for parameter checks (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Modify texts & fix typos in Documentation/netlink/specs/tc.yaml (Dave Taht <dave.taht(a)gmail.com>) - Add descriptions of packet counter statistics and the reset function of sch_dualpi2.c - Fix step_thresh in packets - Update code comments in sch_dualpi2.c v4 (22-Oct-2024) - Update statement in Kconfig for DualPI2 (Stephen Hemminger <stephen(a)networkplumber.org>) - Put a blank line after #define in sch_dualpi2.c (Stephen Hemminger <stephen(a)networkplumber.org>) - Fix line length warning. v3 (19-Oct-2024) - Fix compilaiton error - Update Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Oct-2024) - Add Documentation/netlink/specs/tc.yaml (Jakub Kicinski <kuba(a)kernel.org>) - Use dualpi2 instead of skb prefix (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Replace nla_parse_nested_deprecated with nla_parse_nested (Jamal Hadi Salim <jhs(a)mojatatu.com>) - Fix line length warning --- Chia-Yu Chang (4): sched: Struct definition and parsing of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc selftests/tc-testing: Add selftests for qdisc DualPI2 Documentation: netlink: specs: tc: Add DualPI2 specification Koen De Schepper (1): sched: Add enqueue/dequeue of dualpi2 qdisc Documentation/netlink/specs/tc.yaml | 156 +++ include/net/dropreason-core.h | 6 + include/uapi/linux/pkt_sched.h | 68 + net/sched/Kconfig | 12 + net/sched/Makefile | 1 + net/sched/sch_dualpi2.c | 1146 +++++++++++++++++ tools/testing/selftests/tc-testing/config | 1 + .../tc-testing/tc-tests/qdiscs/dualpi2.json | 254 ++++ tools/testing/selftests/tc-testing/tdc.sh | 1 + 9 files changed, 1645 insertions(+) create mode 100644 net/sched/sch_dualpi2.c create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/dualpi2.json -- 2.34.1

3 months

1
5
0 0

[PATCH bpf-next v4 0/9] bpf: Mitigate Spectre v1 using barriers

by Luis Gerhorst

This improves the expressiveness of unprivileged BPF by inserting speculation barriers instead of rejecting the programs. The approach was previously presented at LPC'24 [1] and RAID'24 [2]. To mitigate the Spectre v1 (PHT) vulnerability, the kernel rejects potentially-dangerous unprivileged BPF programs as of commit 9183671af6db ("bpf: Fix leakage under speculation on mispredicted branches"). In [2], we have analyzed 364 object files from open source projects (Linux Samples and Selftests, BCC, Loxilb, Cilium, libbpf Examples, Parca, and Prevail) and found that this affects 31% to 54% of programs. To resolve this in the majority of cases this patchset adds a fall-back for mitigating Spectre v1 using speculation barriers. The kernel still optimistically attempts to verify all speculative paths but uses speculation barriers against v1 when unsafe behavior is detected. This allows for more programs to be accepted without disabling the BPF Spectre mitigations (e.g., by setting cpu_mitigations_off()). For this, it relies on the fact that speculation barriers generally prevent all later instructions from executing if the speculation was not correct (not only loads). See patch 7 ("bpf: Fall back to nospec for Spectre v1") for a detailed description and references to the relevant vendor documentation (AMD and Intel x86-64, ARM64, and PowerPC). In [1] we have measured the overhead of this approach relative to having mitigations off and including the upstream Spectre v4 mitigations. For event tracing and stack-sampling profilers, we found that mitigations increase BPF program execution time by 0% to 62%. For the Loxilb network load balancer, we have measured a 14% slowdown in SCTP performance but no significant slowdown for TCP. This overhead only applies to programs that were previously rejected. I reran the expressiveness-evaluation with v6.14 and made sure the main results still match those from [1] and [2] (which used v6.5). Main design decisions are: * Do not use separate bytecode insns for v1 and v4 barriers (inspired by Daniel Borkmann's question at LPC). This simplifies the verifier significantly and has the only downside that performance on PowerPC is not as high as it could be. * Allow archs to still disable v1/v4 mitigations separately by setting bpf_jit_bypass_spec_v1/v4(). This has the benefit that archs can benefit from improved BPF expressiveness / performance if they are not vulnerable (e.g., ARM64 for v4 in the kernel). * Do not remove the empty BPF_NOSPEC implementation for backends for which it is unknown whether they are vulnerable to Spectre v1. [1] https://lpc.events/event/18/contributions/1954/ ("Mitigating Spectre-PHT using Speculation Barriers in Linux eBPF") [2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and Precise Spectre Defenses for Untrusted Linux Kernel Extensions") Changes: * v3 -> v4: - Remove insn parameter from do_check_insn() and extract process_bpf_exit_full as a function as requested by Eduard - Investigate apparent sanitize_check_bounds() bug reported by Kartikeya (does appear to not be a bug but only confusing code), sent separate patch to document it and add an assert - Remove already-merged commit 1 ("selftests/bpf: Fix caps for __xlated/jited_unpriv") - Drop former commit 10 ("bpf: Allow nospec-protected var-offset stack access") as it did not include a test and there are other places where var-off is rejected. Also, none of the tested real-world programs used var-off in the paper. Therefore keep the old behavior for now and potentially prepare a patch that converts all cases later if required. - Add link to AMD lfence and PowerPC speculation barrier (ori 31,31,0) documentation - Move detailed barrier documentation to commit 7 ("bpf: Fall back to nospec for Spectre v1") - Link to v3: https://lore.kernel.org/all/20250501073603.1402960-1-luis.gerhorst@fau.de/ * v2 -> v3: - Fix https://lore.kernel.org/oe-kbuild-all/202504212030.IF1SLhz6-lkp@intel.com/ and similar by moving the bpf_jit_bypass_spec_v1/v4() prototypes out of the #ifdef CONFIG_BPF_SYSCALL. Decided not to move them to filter.h (where similar bpf_jit_*() prototypes live) as they would still have to be duplicated in bpf.h to be usable to bpf_bypass_spec_v1/v4() (unless including filter.h in bpf.h is an option). - Fix https://lore.kernel.org/oe-kbuild-all/202504220035.SoGveGpj-lkp@intel.com/ by moving the variable declarations out of the switch-case. - Build touched C files with W=2 and bpf config on x86 to check that there are no other warnings introduced. - Found 3 more checkpatch warnings that can be fixed without degrading readability. - Rebase to bpf-next 2025-05-01 - Link to v2: https://lore.kernel.org/bpf/20250421091802.3234859-1-luis.gerhorst@fau.de/ * v1 -> v2: - Drop former commits 9 ("bpf: Return PTR_ERR from push_stack()") and 11 ("bpf: Fall back to nospec for spec path verification") as suggested by Alexei. This series therefore no longer changes push_stack() to return PTR_ERR. - Add detailed explanation of how lfence works internally and how it affects the algorithm. - Add tests checking that nospec instructions are inserted in expected locations using __xlated_unpriv as suggested by Eduard (also, include a fix for __xlated_unpriv) - Add a test for the mitigations from the description of commit 9183671af6db ("bpf: Fix leakage under speculation on mispredicted branches") - Remove unused variables from do_check[_insn]() as suggested by Eduard. - Remove INSN_IDX_MODIFIED to improve readability as suggested by Eduard. This also causes the nospec_result-check to run (and fail) for jumping-ops. Add a warning to assert that this check must never succeed in that case. - Add details on the safety of patch 10 ("bpf: Allow nospec-protected var-offset stack access") based on the feedback on v1. - Rebase to bpf-next-250420 - Link to v1: https://lore.kernel.org/all/20250313172127.1098195-1-luis.gerhorst@fau.de/ * RFC -> v1: - rebase to bpf-next-250313 - tests: mark expected successes/new errors - add bpt_jit_bypass_spec_v1/v4() to avoid #ifdef in bpf_bypass_spec_v1/v4() - ensure that nospec with v1-support is implemented for archs for which GCC supports speculation barriers, except for MIPS - arm64: emit speculation barrier - powerpc: change nospec to include v1 barrier - discuss potential security (archs that do not impl. BPF nospec) and performance (only PowerPC) regressions - Link to RFC: https://lore.kernel.org/bpf/20250224203619.594724-1-luis.gerhorst@fau.de/ Luis Gerhorst (9): bpf: Move insn if/else into do_check_insn() bpf: Return -EFAULT on misconfigurations bpf: Return -EFAULT on internal errors bpf, arm64, powerpc: Add bpf_jit_bypass_spec_v1/v4() bpf, arm64, powerpc: Change nospec to include v1 barrier bpf: Rename sanitize_stack_spill to nospec_result bpf: Fall back to nospec for Spectre v1 selftests/bpf: Add test for Spectre v1 mitigation bpf: Fall back to nospec for sanitization-failures arch/arm64/net/bpf_jit.h | 5 + arch/arm64/net/bpf_jit_comp.c | 28 +- arch/powerpc/net/bpf_jit_comp64.c | 80 ++- include/linux/bpf.h | 11 +- include/linux/bpf_verifier.h | 3 +- include/linux/filter.h | 2 +- kernel/bpf/core.c | 32 +- kernel/bpf/verifier.c | 633 ++++++++++-------- tools/testing/selftests/bpf/progs/bpf_misc.h | 4 + .../selftests/bpf/progs/verifier_and.c | 8 +- .../selftests/bpf/progs/verifier_bounds.c | 66 +- .../bpf/progs/verifier_bounds_deduction.c | 45 +- .../selftests/bpf/progs/verifier_map_ptr.c | 20 +- .../selftests/bpf/progs/verifier_movsx.c | 16 +- .../selftests/bpf/progs/verifier_unpriv.c | 65 +- .../bpf/progs/verifier_value_ptr_arith.c | 101 ++- .../selftests/bpf/verifier/dead_code.c | 3 +- tools/testing/selftests/bpf/verifier/jmp32.c | 33 +- tools/testing/selftests/bpf/verifier/jset.c | 10 +- 19 files changed, 755 insertions(+), 410 deletions(-) base-commit: cd2e103d57e5615f9bb027d772f93b9efd567224 -- 2.49.0

3 months

4
12
0 0

[PATCH] selftests/mm: Increase timeout from 180 to 900 seconds

by Shivank Garg

The mm selftests are timing out with the current 180-second limit. Testing shows that run_vmtests.sh takes approximately 11 minutes (664 seconds) to complete. Increase the timeout to 900 seconds (15 minutes) to provide sufficient buffer for the tests to complete successfully. Signed-off-by: Shivank Garg <shivankg(a)amd.com> --- tools/testing/selftests/mm/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/settings b/tools/testing/selftests/mm/settings index a953c96aa16e..e2206265f67c 100644 --- a/tools/testing/selftests/mm/settings +++ b/tools/testing/selftests/mm/settings @@ -1 +1 @@ -timeout=180 +timeout=900 -- 2.43.0

3 months

2
2
0 0

[PATCH net v2] net: clear the dst when changing skb protocol

by Jakub Kicinski

A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Also clear the dst if we did an encap or decap as those will most likely make the dst stale. Try to preserve metadata dsts, those may carry non-routing metadata. Reviewed-by: Maciej Żenczykowski <maze(a)google.com> Acked-by: Daniel Borkmann <daniel(a)iogearbox.net> Fixes: d219df60a70e ("bpf: Add ipip6 and ip6ip decap support for bpf_skb_adjust_room()") Fixes: 1b00e0dfe7d0 ("bpf: update skb->protocol in bpf_skb_net_grow") Fixes: 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- v2: - drop on encap/decap - fix typo (protcol) - add the test to the Makefile v1: https://lore.kernel.org/20250604210604.257036-1-kuba@kernel.org I wonder if we should not skip ingress (tc_skip_classify?) for looped back packets in the first place. But that doesn't seem robust enough vs multiple redirections to solve the crash. Ignoring LOOPBACK packets (like the NAT46 prog should) doesn't work either, since BPF can change pkt_type arbitrarily. CC: martin.lau(a)linux.dev CC: daniel(a)iogearbox.net CC: john.fastabend(a)gmail.com CC: eddyz87(a)gmail.com CC: sdf(a)fomichev.me CC: haoluo(a)google.com CC: willemb(a)google.com CC: william.xuanziyang(a)huawei.com CC: alan.maguire(a)oracle.com CC: bpf(a)vger.kernel.org CC: edumazet(a)google.com CC: maze(a)google.com CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org CC: yonghong.song(a)linux.dev --- tools/testing/selftests/net/Makefile | 1 + net/core/filter.c | 31 +++++++++++++++++++------- tools/testing/selftests/net/nat6to4.sh | 15 +++++++++++++ 3 files changed, 39 insertions(+), 8 deletions(-) create mode 100755 tools/testing/selftests/net/nat6to4.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index ea84b88bcb30..ab996bd22a5f 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -27,6 +27,7 @@ TEST_PROGS += amt.sh TEST_PROGS += unicast_extensions.sh TEST_PROGS += udpgro_fwd.sh TEST_PROGS += udpgro_frglist.sh +TEST_PROGS += nat6to4.sh TEST_PROGS += veth.sh TEST_PROGS += ioam6.sh TEST_PROGS += gro.sh diff --git a/net/core/filter.c b/net/core/filter.c index 327ca73f9cd7..d5917d6446f2 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3406,8 +3406,14 @@ BPF_CALL_3(bpf_skb_change_proto, struct sk_buff *, skb, __be16, proto, * need to be verified first. */ ret = bpf_skb_proto_xlat(skb, proto); + if (ret) + return ret; + bpf_compute_data_pointers(skb); - return ret; + if (skb_valid_dst(skb)) + skb_dst_drop(skb); + + return 0; } static const struct bpf_func_proto bpf_skb_change_proto_proto = { @@ -3554,6 +3560,9 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, else if (skb->protocol == htons(ETH_P_IPV6) && flags & BPF_F_ADJ_ROOM_ENCAP_L3_IPV4) skb->protocol = htons(ETH_P_IP); + + if (skb_valid_dst(skb)) + skb_dst_drop(skb); } if (skb_is_gso(skb)) { @@ -3581,6 +3590,7 @@ static int bpf_skb_net_grow(struct sk_buff *skb, u32 off, u32 len_diff, static int bpf_skb_net_shrink(struct sk_buff *skb, u32 off, u32 len_diff, u64 flags) { + bool decap = flags & BPF_F_ADJ_ROOM_DECAP_L3_MASK; int ret; if (unlikely(flags & ~(BPF_F_ADJ_ROOM_FIXED_GSO | @@ -3603,13 +3613,18 @@ static int bpf_skb_net_shrink(struct sk_buff *skb, u32 off, u32 len_diff, if (unlikely(ret < 0)) return ret; - /* Match skb->protocol to new outer l3 protocol */ - if (skb->protocol == htons(ETH_P_IP) && - flags & BPF_F_ADJ_ROOM_DECAP_L3_IPV6) - skb->protocol = htons(ETH_P_IPV6); - else if (skb->protocol == htons(ETH_P_IPV6) && - flags & BPF_F_ADJ_ROOM_DECAP_L3_IPV4) - skb->protocol = htons(ETH_P_IP); + if (decap) { + /* Match skb->protocol to new outer l3 protocol */ + if (skb->protocol == htons(ETH_P_IP) && + flags & BPF_F_ADJ_ROOM_DECAP_L3_IPV6) + skb->protocol = htons(ETH_P_IPV6); + else if (skb->protocol == htons(ETH_P_IPV6) && + flags & BPF_F_ADJ_ROOM_DECAP_L3_IPV4) + skb->protocol = htons(ETH_P_IP); + + if (skb_valid_dst(skb)) + skb_dst_drop(skb); + } if (skb_is_gso(skb)) { struct skb_shared_info *shinfo = skb_shinfo(skb); diff --git a/tools/testing/selftests/net/nat6to4.sh b/tools/testing/selftests/net/nat6to4.sh new file mode 100755 index 000000000000..0ee859b622a4 --- /dev/null +++ b/tools/testing/selftests/net/nat6to4.sh @@ -0,0 +1,15 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NS="ns-peer-$(mktemp -u XXXXXX)" + +ip netns add "${NS}" +ip -netns "${NS}" link set lo up +ip -netns "${NS}" route add default via 127.0.0.2 dev lo + +tc -n "${NS}" qdisc add dev lo ingress +tc -n "${NS}" filter add dev lo ingress prio 4 protocol ip \ + bpf object-file nat6to4.bpf.o section schedcls/egress4/snat4 direct-action + +ip netns exec "${NS}" \ + bash -c 'echo 012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789abc | socat - UDP4-DATAGRAM:224.1.0.1:6666,ip-multicast-loop=1' -- 2.49.0

3 months

3
5
0 0

ATS 2025 Schedule Now Live – Register Today!

by Gustavo Padovan

Hello everyone, The schedule for the Automated Testing Summit (ATS) 2025 is now live! You can now explore the full program and speaker list at: 🔗 https://ats25.sched.com/ This year’s ATS will be packed with talks and discussions focused on scaling test infrastructure, improving collaboration across projects, and pushing the boundaries of automation in the Linux ecosystem. 📍 ATS 2025 will take place as a co-located event at the Open Source Summit North America, on June 26th in Denver, CO. If you haven’t yet registered, you can do so here: 🔗 https://events.linuxfoundation.org/open-source-summit-north-america/feature… You can attend in person or virtually. We look forward to seeing you there! Best regards, The KernelCI Team -- Gustavo Padovan Collabora Ltd.

3 months

1
0
0 0

[RFC net-next 6/6] selftests: drv-net: add test for RSS on flow label

by Jakub Kicinski

Add a simple test for checking that RSS on flow label works, and that its rejected for IPv4 flows. # ./tools/testing/selftests/drivers/net/hw/rss_flow_label.py TAP version 13 1..2 ok 1 rss_flow_label.test_rss_flow_label ok 2 rss_flow_label.test_rss_flow_label_6only # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: sdf(a)fomichev.me CC: linux-kselftest(a)vger.kernel.org --- .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/rss_flow_label.py | 151 ++++++++++++++++++ 2 files changed, 152 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/hw/rss_flow_label.py diff --git a/tools/testing/selftests/drivers/net/hw/Makefile b/tools/testing/selftests/drivers/net/hw/Makefile index df2c047ffa90..56bf1f1b8377 100644 --- a/tools/testing/selftests/drivers/net/hw/Makefile +++ b/tools/testing/selftests/drivers/net/hw/Makefile @@ -17,6 +17,7 @@ TEST_PROGS = \ loopback.sh \ pp_alloc_fail.py \ rss_ctx.py \ + rss_flow_label.py \ rss_input_xfrm.py \ tso.py \ xsk_reconfig.py \ diff --git a/tools/testing/selftests/drivers/net/hw/rss_flow_label.py b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py new file mode 100755 index 000000000000..e471e13160ae --- /dev/null +++ b/tools/testing/selftests/drivers/net/hw/rss_flow_label.py @@ -0,0 +1,151 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0 + +""" +Tests for RSS hashing on IPv6 Flow Label. +""" + +import glob +import socket +from lib.py import CmdExitFailure +from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_ge, ksft_in, \ + ksft_not_in, ksft_raises, KsftSkipEx +from lib.py import bkg, cmd, defer, fd_read_timeout, rand_port +from lib.py import NetDrvEpEnv + + +def _ethtool_get_cfg(cfg, fl_type): + descr = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + + converter = { + "IP SA": "s", + "IP DA": "d", + "L3 proto": "t", + "L4 bytes 0 & 1 [TCP/UDP src port]": "f", + "L4 bytes 2 & 3 [TCP/UDP dst port]": "n", + "IPv6 Flow Label": "l", + } + + ret = "" + for line in descr.split("\n")[1:-2]: + # if this raises we probably need to add more keys to converter above + ret += converter[line] + return ret + + +def _traffic(cfg, one_sock, one_cpu): + local_port = rand_port(socket.SOCK_DGRAM) + remote_port = rand_port(socket.SOCK_DGRAM) + + sock = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) + sock.bind(("", local_port)) + sock.connect((cfg.remote_addr_v["6"], 0)) + if one_sock: + send = f"exec 5<>/dev/udp/{cfg.addr_v['6']}/{local_port}; " \ + "for i in `seq 20`; do echo a >&5; sleep 0.02; done; exec 5>&-" + else: + send = "for i in `seq 20`; do echo a | socat -t0.02 - UDP6:" \ + f"[{cfg.addr_v['6']}]:{local_port},sourceport={remote_port}; done" + + cpus = set() + with bkg(send, shell=True, host=cfg.remote, exit_wait=True): + for _ in range(20): + fd_read_timeout(sock.fileno(), 1) + cpu = sock.getsockopt(socket.SOL_SOCKET, socket.SO_INCOMING_CPU) + cpus.add(cpu) + + if one_cpu: + ksft_eq(len(cpus), 1, + f"{one_sock=} - expected one CPU, got traffic on: {cpus=}") + else: + ksft_ge(len(cpus), 2, + f"{one_sock=} - expected many CPUs, got traffic on: {cpus=}") + + +def test_rss_flow_label(cfg): + """ + Test hashing on IPv6 flow label. Send traffic over a single socket + and over multiple sockets. Depend on the remote having auto-label + enabled so that it randomizes the label per socket. + """ + + cfg.require_ipver("6") + cfg.require_cmd("socat", remote=True) + if not hasattr(socket, "SO_INCOMING_CPU"): + raise KsftSkipEx("socket.SO_INCOMING_CPU was added in Python 3.11") + + # 1 is the default, if someone changed it we probably shouldn"t mess with it + af = cmd("cat /proc/sys/net/ipv6/auto_flowlabels", host=cfg.remote).stdout + if af.strip() != "1": + raise KsftSkipEx("Remote does not have auto_flowlabels enabled") + + qcnt = len(glob.glob(f"/sys/class/net/{cfg.ifname}/queues/rx-*")) + if qcnt < 2: + raise KsftSkipEx(f"Local has only {qcnt} queues") + + # Enable flow label hashing for UDP6 + initial = _ethtool_get_cfg(cfg, "udp6") + no_lbl = initial.replace("l", "") + if "l" not in initial: + try: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 l{no_lbl}") + except CmdExitFailure as exc: + raise KsftSkipEx("Device doesn't support Flow Label for UDP6") from exc + + defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _traffic(cfg, one_sock=True, one_cpu=True) + _traffic(cfg, one_sock=False, one_cpu=False) + + # Disable it, we should see no hashing (reset was already defer()ed) + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {no_lbl}") + + _traffic(cfg, one_sock=False, one_cpu=True) + + +def _check_v4_flow_types(cfg): + for fl_type in ["tcp4", "udp4", "ah4", "esp4", "sctp4"]: + try: + cur = cmd(f"ethtool -n {cfg.ifname} rx-flow-hash {fl_type}").stdout + ksft_not_in("Flow Label", cur, + comment=f"{fl_type=} has Flow Label:" + cur) + except CmdExitFailure: + # Probably does not support this flow type + pass + + +def test_rss_flow_label_6only(cfg): + """ + Test interactions with IPv4 flow types. It should not be possible to set + IPv6 Flow Label hashing for an IPv4 flow type. The Flow Label should also + not appear in the IPv4 "current config". + """ + + with ksft_raises(CmdExitFailure) as cm: + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash tcp4 sdfnl") + ksft_in("Invalid argument", cm.exception.cmd.stderr) + + _check_v4_flow_types(cfg) + + # Try to enable Flow Labels and check again, in case it leaks thru + initial = _ethtool_get_cfg(cfg, "udp6") + changed = initial.replace("l", "") if "l" in initial else initial + "l" + + cmd(f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {changed}") + restore = defer(cmd, f"ethtool -N {cfg.ifname} rx-flow-hash udp6 {initial}") + + _check_v4_flow_types(cfg) + restore.exec() + _check_v4_flow_types(cfg) + + +def main() -> None: + with NetDrvEpEnv(__file__, nsim_test=False) as cfg: + ksft_run([test_rss_flow_label, + test_rss_flow_label_6only], + args=(cfg, )) + ksft_exit() + + +if __name__ == "__main__": + main() -- 2.49.0

3 months

1
0
0 0

[RFC net-next 5/6] selftests: drv-net: import things in lib one by one

by Jakub Kicinski

pylint doesn't understand our path hacks, and it generates a lot of warnings for driver tests. Import what we use one by one, this is hopefully not too tedious and it makes pylint happy. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: mohan.prasad(a)microchip.com CC: sdf(a)fomichev.me CC: dw(a)davidwei.uk CC: linux-kselftest(a)vger.kernel.org --- .../selftests/drivers/net/hw/lib/py/__init__.py | 17 +++++++++++++++++ .../selftests/drivers/net/lib/py/__init__.py | 14 ++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py index b582885786f5..56ff11074b55 100644 --- a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -7,8 +7,25 @@ KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve() try: sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * from drivers.net.lib.py import * + + # Import one by one to avoid pylint false positives + from net.lib.py import EthtoolFamily, NetdevFamily, NetshaperFamily, \ + NlError, RtnlFamily + from net.lib.py import CmdExitFailure + from net.lib.py import bkg, cmd, defer, ethtool, fd_read_timeout, ip, \ + rand_port, tool, wait_port_listen + from net.lib.py import fd_read_timeout + from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx + from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ + ksft_setup + from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \ + ksft_ne, ksft_not_in, ksft_raises, ksft_true + from net.lib.py import NetNSEnter + from drivers.net.lib.py import GenerateTraffic + from drivers.net.lib.py import NetDrvEnv, NetDrvEpEnv except ModuleNotFoundError as e: ksft_pr("Failed importing `net` library from kernel sources") ksft_pr(str(e)) diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py index 401e70f7f136..9ed1d8f70524 100644 --- a/tools/testing/selftests/drivers/net/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py @@ -7,7 +7,21 @@ KSFT_DIR = (Path(__file__).parent / "../../../..").resolve() try: sys.path.append(KSFT_DIR.as_posix()) + from net.lib.py import * + + # Import one by one to avoid pylint false positives + from net.lib.py import EthtoolFamily, NetdevFamily, NetshaperFamily, \ + NlError, RtnlFamily + from net.lib.py import CmdExitFailure + from net.lib.py import bkg, cmd, defer, ethtool, fd_read_timeout, ip, \ + rand_port, tool, wait_port_listen + from net.lib.py import fd_read_timeout + from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx + from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ + ksft_setup + from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \ + ksft_ne, ksft_not_in, ksft_raises, ksft_true except ModuleNotFoundError as e: ksft_pr("Failed importing `net` library from kernel sources") ksft_pr(str(e)) -- 2.49.0

3 months

1
0
0 0

[PATCH] selftests: ir_decoder: Convert header comment to proper multi-line block

by Abdelrahman Fekry

The test file for the IR decoder used single-line comments at the top to document its purpose and licensing, which is inconsistent with the style used throughout the Linux kernel. in this patch i converted the file header to a proper multi-line comment block (/*) that aligns with standard kernel practices. This improves readability, consistency across selftests, and ensures the license and documentation are clearly visible in a familiar format. No functional changes have been made. Signed-off-by: Abdelrahman Fekry <Abdelrahmanfekry375(a)gmail.com> --- tools/testing/selftests/ir/ir_loopback.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/ir/ir_loopback.c b/tools/testing/selftests/ir/ir_loopback.c index f4a15cbdd5ea..2de4a6296f35 100644 --- a/tools/testing/selftests/ir/ir_loopback.c +++ b/tools/testing/selftests/ir/ir_loopback.c @@ -1,14 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 -// test ir decoder -// -// Copyright (C) 2018 Sean Young <sean(a)mess.org> - -// When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback -// will send this IR to the receiver side, where we try to read the decoded -// IR. Decoding happens in a separate kernel thread, so we will need to -// wait until that is scheduled, hence we use poll to check for read -// readiness. - +/* Copyright (C) 2018 Sean Young <sean(a)mess.org> + * + * Selftest for IR decoder + * + * + * When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback + * will send this IR to the receiver side, where we try to read the decoded + * IR. Decoding happens in a separate kernel thread, so we will need to + * wait until that is scheduled, hence we use poll to check for read + * readiness. +*/ #include <linux/lirc.h> #include <errno.h> #include <stdio.h> -- 2.25.1

3 months

3
3
0 0

[PATCH v6 0/2] x86/fred: Prevent immediate repeat of single step trap on return from SIGTRAP handler

by Xin Li (Intel)

IDT event delivery has a debug hole in which it does not generate #DB upon returning to userspace before the first userspace instruction is executed if the Trap Flag (TF) is set. FRED closes this hole by introducing a software event flag, i.e., bit 17 of the augmented SS: if the bit is set and ERETU would result in RFLAGS.TF = 1, a single-step trap will be pending upon completion of ERETU. However I overlooked properly setting and clearing the bit in different situations. Thus when FRED is enabled, if the Trap Flag (TF) is set without an external debugger attached, it can lead to an infinite loop in the SIGTRAP handler. To avoid this, the software event flag in the augmented SS must be cleared, ensuring that no single-step trap remains pending when ERETU completes. This patch set combines the fix [1] and its corresponding selftest [2] (requested by Dave Hansen) into one patch set. [1] https://lore.kernel.org/lkml/20250523050153.3308237-1-xin@zytor.com/ [2] https://lore.kernel.org/lkml/20250530230707.2528916-1-xin@zytor.com/ This patch set is based on tip/x86/urgent branch. Link to v5 of this patch set: https://lore.kernel.org/lkml/20250606174528.1004756-1-xin@zytor.com/ Changes in v6: *) Replace a "sub $128, %rsp" with "add $-128, %rsp" (hpa). *) Declared loop_count_on_same_ip inside sigtrap() (Sohil). *) s/sigtrap/SIGTRAP (Sohil). *) Add TB from Sohil to the first patch. Xin Li (Intel) (2): x86/fred/signal: Prevent immediate repeat of single step trap on return from SIGTRAP handler selftests/x86: Add a test to detect infinite SIGTRAP handler loop arch/x86/include/asm/sighandling.h | 22 +++++ arch/x86/kernel/signal_32.c | 4 + arch/x86/kernel/signal_64.c | 4 + tools/testing/selftests/x86/Makefile | 2 +- tools/testing/selftests/x86/sigtrap_loop.c | 101 +++++++++++++++++++++ 5 files changed, 132 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/x86/sigtrap_loop.c base-commit: dd2922dcfaa3296846265e113309e5f7f138839f -- 2.49.0

3 months

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror