On 2022/9/23 21:40, Victor Nogueira wrote:
On 20/09/2022 23:50, Zhengchao Shao wrote:
For this patchset, test cases of the qdisc modules are added to the tc-testing test suite.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm ok 1 7628 - Create ATM with default setting ok 2 390a - Delete ATM with valid handle ok 3 32a0 - Show ATM class ok 4 6310 - Dump ATM stats
./tdc.py -c choke ok 1 8937 - Create CHOKE with default setting ok 2 48c0 - Create CHOKE with min packet setting ok 3 38c1 - Create CHOKE with max packet setting ok 4 234a - Create CHOKE with ecn setting ok 5 4380 - Create CHOKE with burst setting ok 6 48c7 - Delete CHOKE with valid handle ok 7 4398 - Replace CHOKE with min setting ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel ok 1 983a - Create CODEL with default setting ok 2 38aa - Create CODEL with limit packet setting ok 3 9178 - Create CODEL with target setting ok 4 78d1 - Create CODEL with interval setting ok 5 238a - Create CODEL with ecn setting ok 6 939c - Create CODEL with ce_threshold setting ok 7 8380 - Delete CODEL with valid handle ok 8 289c - Replace CODEL with limit setting ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf ok 1 34ba - Create ETF with default setting ok 2 438f - Create ETF with delta nanos setting ok 3 9041 - Create ETF with deadline_mode setting ok 4 9a0c - Create ETF with skip_sock_check setting ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq ok 1 983b - Create FQ with default setting ok 2 38a1 - Create FQ with limit packet setting ok 3 0a18 - Create FQ with flow_limit setting ok 4 2390 - Create FQ with quantum setting ok 5 845b - Create FQ with initial_quantum setting ok 6 9398 - Create FQ with maxrate setting ok 7 342c - Create FQ with nopacing setting ok 8 6391 - Create FQ with refill_delay setting ok 9 238b - Create FQ with low_rate_threshold setting ok 10 7582 - Create FQ with orphan_mask setting ok 11 4894 - Create FQ with timer_slack setting ok 12 324c - Create FQ with ce_threshold setting ok 13 424a - Create FQ with horizon time setting ok 14 89e1 - Create FQ with horizon_cap setting ok 15 32e1 - Delete FQ with valid handle ok 16 49b0 - Replace FQ with limit setting ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred ok 1 8942 - Create GRED with default setting ok 2 5783 - Create GRED with grio setting ok 3 8a09 - Create GRED with limit setting ok 4 48cb - Create GRED with ecn setting ok 5 763a - Change GRED setting ok 6 8309 - Show GRED class
./tdc.py -c hhf ok 1 4812 - Create HHF with default setting ok 2 8a92 - Create HHF with limit setting ok 3 3491 - Create HHF with quantum setting ok 4 ba04 - Create HHF with reset_timeout setting ok 5 4238 - Create HHF with admit_bytes setting ok 6 839f - Create HHF with evict_timeout setting ok 7 a044 - Create HHF with non_hh_weight setting ok 8 32f9 - Change HHF with limit setting ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast ok 1 900c - Create pfifo_fast with default setting ok 2 7470 - Dump pfifo_fast stats ok 3 b974 - Replace pfifo_fast with different handle ok 4 3240 - Delete pfifo_fast with valid handle ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug ok 1 3289 - Create PLUG with default setting ok 2 0917 - Create PLUG with block setting ok 3 483b - Create PLUG with release setting ok 4 4995 - Create PLUG with release_indefinite setting ok 5 389c - Create PLUG with limit setting ok 6 384a - Delete PLUG with valid handle ok 7 439a - Replace PLUG with limit setting ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb ok 1 3294 - Create SFB with default setting ok 2 430a - Create SFB with rehash setting ok 3 3410 - Create SFB with db setting ok 4 49a0 - Create SFB with limit setting ok 5 1241 - Create SFB with max setting ok 6 3249 - Create SFB with target setting ok 7 30a9 - Create SFB with increment setting ok 8 239a - Create SFB with decrement setting ok 9 9301 - Create SFB with penalty_rate setting ok 10 2a01 - Create SFB with penalty_burst setting ok 11 3209 - Change SFB with rehash setting ok 12 5447 - Show SFB class
./tdc.py -c sfq ok 1 7482 - Create SFQ with default setting ok 2 c186 - Create SFQ with limit setting ok 3 ae23 - Create SFQ with perturb setting ok 4 a430 - Create SFQ with quantum setting ok 5 4539 - Create SFQ with divisor setting ok 6 b089 - Create SFQ with flows setting ok 7 99a0 - Create SFQ with depth setting ok 8 7389 - Create SFQ with headdrop setting ok 9 6472 - Create SFQ with redflowlimit setting ok 10 8929 - Show SFQ class
./tdc.py -c skbprio ok 1 283e - Create skbprio with default setting ok 2 c086 - Create skbprio with limit setting ok 3 6733 - Change skbprio with limit setting ok 4 2958 - Show skbprio class
./tdc.py -c taprio ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues) ok 2 9462 - Add taprio Qdisc with multiple sched-entry ok 3 8d92 - Add taprio Qdisc with txtime-delay ok 4 d092 - Delete taprio Qdisc with valid handle ok 5 8471 - Show taprio class ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf ok 1 6430 - Create TBF with default setting ok 2 0518 - Create TBF with mtu setting ok 3 320a - Create TBF with peakrate setting ok 4 239b - Create TBF with latency setting ok 5 c975 - Create TBF with overhead setting ok 6 948c - Create TBF with linklayer setting ok 7 3549 - Replace TBF with mtu ok 8 f948 - Change TBF with latency time ok 9 2348 - Show TBF class
./tdc.py -c teql ok 1 84a0 - Create TEQL with default setting ok 2 7734 - Create TEQL with multiple device ok 3 34a9 - Delete TEQL with valid handle ok 4 6289 - Show TEQL stats
v2: modify subject prefix
Zhengchao Shao (15): selftests/tc-testing: add selftests for atm qdisc selftests/tc-testing: add selftests for choke qdisc selftests/tc-testing: add selftests for codel qdisc selftests/tc-testing: add selftests for etf qdisc selftests/tc-testing: add selftests for fq qdisc selftests/tc-testing: add selftests for gred qdisc selftests/tc-testing: add selftests for hhf qdisc selftests/tc-testing: add selftests for pfifo_fast qdisc selftests/tc-testing: add selftests for plug qdisc selftests/tc-testing: add selftests for sfb qdisc selftests/tc-testing: add selftests for sfq qdisc selftests/tc-testing: add selftests for skbprio qdisc selftests/tc-testing: add selftests for taprio qdisc selftests/tc-testing: add selftests for tbf qdisc selftests/tc-testing: add selftests for teql qdisc
.../tc-testing/tc-tests/qdiscs/atm.json | 94 +++++ .../tc-testing/tc-tests/qdiscs/choke.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/codel.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/etf.json | 117 ++++++ .../tc-testing/tc-tests/qdiscs/fq.json | 395 ++++++++++++++++++ .../tc-testing/tc-tests/qdiscs/gred.json | 164 ++++++++ .../tc-testing/tc-tests/qdiscs/hhf.json | 210 ++++++++++ .../tc-tests/qdiscs/pfifo_fast.json | 119 ++++++ .../tc-testing/tc-tests/qdiscs/plug.json | 188 +++++++++ .../tc-testing/tc-tests/qdiscs/sfb.json | 279 +++++++++++++ .../tc-testing/tc-tests/qdiscs/sfq.json | 232 ++++++++++ .../tc-testing/tc-tests/qdiscs/skbprio.json | 95 +++++ .../tc-testing/tc-tests/qdiscs/taprio.json | 135 ++++++ .../tc-testing/tc-tests/qdiscs/tbf.json | 211 ++++++++++ .../tc-testing/tc-tests/qdiscs/teql.json | 97 +++++ 15 files changed, 2735 insertions(+) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/atm.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/choke.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/codel.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/etf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/gred.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/hhf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/pfifo_fast.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/plug.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfb.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/sfq.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/skbprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/taprio.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/tbf.json create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/teql.json
When adding new test case files, you should add any necessary configs needed to run them in tools/testing/selftests/tc-testing/config, if they aren't already there.
For example, your ATM patch should also add the following config options to that file:
CONFIG_ATM=y CONFIG_NET_SCH_ATM=m
Hi Victor： Thank you for your testing. I will add config in V3. It might be better to generate executable test suites based on kernel config. However, this feature does not seem to be supported currently. Or This feature can be added later.
Zhengchao Shao