Add a regression test for the problem fixed by the following patch, which would require specific environmental conditions to be able to be reproduced and regression-tested on real hardware:
iio: light: opt3001: Fixed timeout error when 0 lux https://lore.kernel.org/lkml/20210920125351.6569-1-valek@2n.cz/
No other aspects of the driver are tested.
Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com --- .../roadtest/roadtest/tests/iio/__init__.py | 0 .../roadtest/roadtest/tests/iio/config | 1 + .../roadtest/tests/iio/light/__init__.py | 0 .../roadtest/roadtest/tests/iio/light/config | 1 + .../roadtest/tests/iio/light/test_opt3001.py | 95 +++++++++++++++++++ 5 files changed, 97 insertions(+) create mode 100644 tools/testing/roadtest/roadtest/tests/iio/__init__.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/config create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/__init__.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/config create mode 100644 tools/testing/roadtest/roadtest/tests/iio/light/test_opt3001.py
diff --git a/tools/testing/roadtest/roadtest/tests/iio/__init__.py b/tools/testing/roadtest/roadtest/tests/iio/__init__.py new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/tools/testing/roadtest/roadtest/tests/iio/config b/tools/testing/roadtest/roadtest/tests/iio/config new file mode 100644 index 000000000000..a08d9e23ce38 --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/config @@ -0,0 +1 @@ +CONFIG_IIO=y diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/__init__.py b/tools/testing/roadtest/roadtest/tests/iio/light/__init__.py new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/config b/tools/testing/roadtest/roadtest/tests/iio/light/config new file mode 100644 index 000000000000..b9753f2d0728 --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/config @@ -0,0 +1 @@ +CONFIG_OPT3001=m diff --git a/tools/testing/roadtest/roadtest/tests/iio/light/test_opt3001.py b/tools/testing/roadtest/roadtest/tests/iio/light/test_opt3001.py new file mode 100644 index 000000000000..abf20b8f3516 --- /dev/null +++ b/tools/testing/roadtest/roadtest/tests/iio/light/test_opt3001.py @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright Axis Communications AB + +from typing import Any, Final + +from roadtest.backend.i2c import SMBusModel +from roadtest.core.devicetree import DtFragment, DtVar +from roadtest.core.hardware import Hardware +from roadtest.core.modules import insmod, rmmod +from roadtest.core.suite import UMLTestCase +from roadtest.core.sysfs import I2CDriver, read_float + +REG_RESULT: Final = 0x00 +REG_CONFIGURATION: Final = 0x01 +REG_LOW_LIMIT: Final = 0x02 +REG_HIGH_LIMIT: Final = 0x03 +REG_MANUFACTURER_ID: Final = 0x7E +REG_DEVICE_ID: Final = 0x7F + +REG_CONFIGURATION_CRF: Final = 1 << 7 + + +class OPT3001(SMBusModel): + def __init__(self, **kwargs: Any) -> None: + super().__init__(regbytes=2, byteorder="big", **kwargs) + # Reset values from datasheet + self.regs = { + REG_RESULT: 0x0000, + REG_CONFIGURATION: 0xC810, + REG_LOW_LIMIT: 0xC000, + REG_HIGH_LIMIT: 0xBFFF, + REG_MANUFACTURER_ID: 0x5449, + REG_DEVICE_ID: 0x3001, + } + + def reg_read(self, addr: int) -> int: + val = self.regs[addr] + + if addr == REG_CONFIGURATION: + # Always indicate that the conversion is ready. This is good + # enough for our current purposes. + val |= REG_CONFIGURATION_CRF + + return val + + def reg_write(self, addr: int, val: int) -> None: + assert addr in self.regs + self.regs[addr] = val + + +class TestOPT3001(UMLTestCase): + dts = DtFragment( + src=""" +&i2c { + light-sensor@$addr$ { + compatible = "ti,opt3001"; + reg = <0x$addr$>; + }; +}; + """, + variables={ + "addr": DtVar.I2C_ADDR, + }, + ) + + @classmethod + def setUpClass(cls) -> None: + insmod("opt3001") + + @classmethod + def tearDownClass(cls) -> None: + rmmod("opt3001") + + def setUp(self) -> None: + self.driver = I2CDriver("opt3001") + self.hw = Hardware("i2c") + self.hw.load_model(OPT3001) + + def tearDown(self) -> None: + self.hw.close() + + def test_illuminance(self) -> None: + data = [ + # Some values from datasheet, and 0 + (0b_0000_0000_0000_0000, 0), + (0b_0000_0000_0000_0001, 0.01), + (0b_0011_0100_0101_0110, 88.80), + (0b_0111_1000_1001_1010, 2818.56), + ] + with self.driver.bind(self.dts["addr"]) as dev: + luxfile = dev.path / "iio:device0/in_illuminance_input" + + for regval, lux in data: + self.hw.reg_write(REG_RESULT, regval) + self.assertEqual(read_float(luxfile), lux)