While running kselftest recently added gpio gpio-sim.sh test case the following warning was triggered on Linux next tag 20210330 tag running on arm64 juno and hikey devices.
GOOD: next-20210326 BAD: next-20210330
This is still happening today on Linux next tag 20210407.
# selftests: gpio: gpio-sim.sh # 1. chip_name and dev_name attributes # 1.1. Chip name is communicated to user [ 143.081193] BUG: key ffff000800eba398 has not been registered! [ 143.087326] ------------[ cut here ]------------ [ 143.091987] DEBUG_LOCKS_WARN_ON(1) [ 143.092005] WARNING: CPU: 1 PID: 1821 at /usr/src/kernel/kernel/locking/lockdep.c:4688 lockdep_init_map_type+0xf0/0x298 [ 143.106223] Modules linked in: gpio_sim rfkill tda998x cec drm_kms_helper drm crct10dif_ce fuse [last unloaded: gpio_mockup] [ 143.117495] CPU: 1 PID: 1821 Comm: mv Not tainted 5.12.0-rc5-next-20210330 #1 [ 143.124645] Hardware name: ARM Juno development board (r2) (DT) [ 143.130572] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 143.136589] pc : lockdep_init_map_type+0xf0/0x298 [ 143.141302] lr : lockdep_init_map_type+0xf0/0x298 [ 143.146014] sp : ffff800013fb3560 [ 143.149330] x29: ffff800013fb3560 x28: 00000000ffffee4b [ 143.154655] x27: 00000000000011b4 x26: 0000000000001000 [ 143.159979] x25: ffff000800eba380 x24: 0000000000000000 [ 143.165303] x23: 0000000000000000 x22: 0000000000000000 [ 143.170626] x21: ffff80001382b000 x20: ffff000800eba398 [ 143.175949] x19: ffff000827ac32a8 x18: ffffffffffffffff [ 143.181273] x17: 0000000000000000 x16: 0000000000000000 [ 143.186595] x15: ffff800012900a88 x14: ffff800093fb3167 [ 143.191918] x13: ffff800013fb3175 x12: 000000000000a0ec [ 143.197241] x11: 0000000005f5e0ff x10: ffff800013fb30c0 [ 143.202565] x9 : ffff800013fb3560 x8 : 4e5241575f534b43 [ 143.207888] x7 : ffff800012989ad8 x6 : ffff800013fb3180 [ 143.213211] x5 : 0000000000000001 x4 : 0000000000000001 [ 143.218534] x3 : ffff800012901000 x2 : 0000000000000000 [ 143.223856] x1 : b4b7acac5f71bc00 x0 : 0000000000000000 [ 143.229180] Call trace: [ 143.231625] lockdep_init_map_type+0xf0/0x298 [ 143.235989] __kernfs_create_file+0xa8/0x1d0 [ 143.240268] sysfs_add_file_mode_ns+0xa8/0x1f8 [ 143.244718] internal_create_group+0x118/0x420 [ 143.249169] sysfs_create_group+0x2c/0x38 [ 143.253185] gpio_sim_probe+0x358/0x3c0 [gpio_sim] [ 143.257995] platform_probe+0x6c/0xd8 [ 143.261663] really_probe+0x16c/0x508 [ 143.265332] driver_probe_device+0x104/0x178 [ 143.269610] __device_attach_driver+0xa4/0x130 [ 143.274062] bus_for_each_drv+0x78/0xd8 [ 143.277903] __device_attach+0xf0/0x178 [ 143.281745] device_initial_probe+0x24/0x30 [ 143.285935] bus_probe_device+0xa0/0xa8 [ 143.289776] device_add+0x424/0x810 [ 143.293270] platform_device_add+0x12c/0x2c0 [ 143.297545] platform_device_register_full+0x124/0x150 [ 143.302692] gpio_sim_config_commit_item+0x160/0x1e0 [gpio_sim] [ 143.308628] configfs_rename+0x1dc/0x220 [ 143.312557] vfs_rename+0x394/0x960 [ 143.316051] do_renameat2+0x408/0x4c0 [ 143.319718] __arm64_sys_renameat+0x5c/0x70 [ 143.323908] el0_svc_common+0x7c/0x158 [ 143.327665] do_el0_svc+0x38/0x90 [ 143.330985] el0_svc+0x20/0x30 [ 143.334045] el0_sync_handler+0x8c/0xb0 [ 143.337886] el0_sync+0x13c/0x140 [ 143.341204] irq event stamp: 5607 [ 143.344520] hardirqs last enabled at (5607): [<ffff800011462dd8>] _raw_spin_unlock_irq+0x48/0x90 [ 143.353410] hardirqs last disabled at (5606): [<ffff8000114586c4>] __schedule+0x364/0x950 [ 143.361605] softirqs last enabled at (5602): [<ffff800010010958>] __do_softirq+0x510/0x63c [ 143.369971] softirqs last disabled at (5577): [<ffff8000100a7474>] irq_exit+0x1b4/0x1c0 [ 143.377992] ---[ end trace bc3c86ef609281aa ]--- # 1.2. chip_name returns 'none' if the chip is still pending
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org
metadata: git branch: master git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git git describe: next-20210330 kernel-config: http://snapshots.linaro.org/openembedded/lkft/lkft/sumo/juno/lkft/linux-next...
https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210407/tes...
Full test log link, https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20210330/tes...
git log --oneline next-20210326..next-20210330 -- tools/testing/selftests/gpio/ 9d940ab72645 selftests: gpio: add test cases for gpio-sim 8a4cb2823240 selftests: gpio: add a helper for reading GPIO line names ab1dbed6f4e8 selftests: gpio: provide a helper for reading chip info
-- Linaro LKFT https://lkft.linaro.org