Add initial framework to test packet forwarding functionality. The tests can run on actual devices using loop-backed cables or using veth pairs.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/.gitignore | 1 + tools/testing/selftests/net/forwarding/README | 56 ++++ .../selftests/net/forwarding/bridge_vlan_aware.sh | 83 ++++++ tools/testing/selftests/net/forwarding/config | 12 + .../net/forwarding/forwarding.config.sample | 31 +++ tools/testing/selftests/net/forwarding/lib.sh | 282 +++++++++++++++++++++ 6 files changed, 465 insertions(+) create mode 100644 tools/testing/selftests/net/forwarding/.gitignore create mode 100644 tools/testing/selftests/net/forwarding/README create mode 100755 tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh create mode 100644 tools/testing/selftests/net/forwarding/config create mode 100644 tools/testing/selftests/net/forwarding/forwarding.config.sample create mode 100644 tools/testing/selftests/net/forwarding/lib.sh
diff --git a/tools/testing/selftests/net/forwarding/.gitignore b/tools/testing/selftests/net/forwarding/.gitignore new file mode 100644 index 000000000000..a793eef5b876 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/.gitignore @@ -0,0 +1 @@ +forwarding.config diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README new file mode 100644 index 000000000000..4a0964c42860 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/README @@ -0,0 +1,56 @@ +Motivation +========== + +One of the nice things about network namespaces is that they allow one +to easily create and test complex environments. + +Unfortunately, these namespaces can not be used with actual switching +ASICs, as their ports can not be migrated to other network namespaces +(NETIF_F_NETNS_LOCAL) and most of them probably do not support the +L1-separation provided by namespaces. + +However, a similar kind of flexibility can be achieved by using VRFs and +by looping the switch ports together. For example: + + br0 + + + vrf-h1 | vrf-h2 + + +---+----+ + + | | | | + 192.0.2.1/24 + + + + 192.0.2.2/24 + swp1 swp2 swp3 swp4 + + + + + + | | | | + +--------+ +--------+ + +The VRFs act as lightweight namespaces representing hosts connected to +the switch. + +This approach for testing switch ASICs has several advantages over the +traditional method that requires multiple physical machines, to name a +few: + +1. Only the device under test (DUT) is being tested without noise from +other system. + +2. Ability to easily provision complex topologies. Testing bridging +between 4-ports LAGs or 8-way ECMP requires many physical links that are +not always available. With the VRF-based approach one merely needs to +loopback more ports. + +These tests are written with switch ASICs in mind, but they can be run +on any Linux box using veth pairs to emulate physical loopbacks. + +Guidelines for Writing Tests +============================ + +o Where possible, reuse an existing topology for different tests instead + of recreating the same topology. +o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and + RFC 5737, respectively. +o Where possible, tests shall be written so that they can be reused by + multiple topologies and added to lib.sh. +o Checks shall be added to lib.sh for any external dependencies. +o Code shall be checked using ShellCheck [1] prior to submission. + +1. https://www.shellcheck.net/ diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh new file mode 100755 index 000000000000..e6faa9548460 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -0,0 +1,83 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=4 +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +switch_destroy() +{ + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +ping_test $h1 192.0.2.2 +ping6_test $h1 2001:db8:1::2 + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config new file mode 100644 index 000000000000..5cd2aed97958 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/config @@ -0,0 +1,12 @@ +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NET_VRF=m +CONFIG_BPF_SYSCALL=y +CONFIG_CGROUP_BPF=y +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_ACT_GACT=m +CONFIG_VETH=m diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample new file mode 100644 index 000000000000..ab235c124f20 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Topology description. p1 looped back to p2, p3 to p4 and so on. +declare -A NETIFS + +NETIFS[p1]=veth0 +NETIFS[p2]=veth1 +NETIFS[p3]=veth2 +NETIFS[p4]=veth3 +NETIFS[p5]=veth4 +NETIFS[p6]=veth5 +NETIFS[p7]=veth6 +NETIFS[p8]=veth7 + +############################################################################## +# Defines + +# IPv4 ping utility name +PING=ping +# IPv6 ping utility name. Some distributions use 'ping' for IPv6. +PING6=ping6 +# Packet generator. Some distributions use 'mz'. +MZ=mausezahn +# Time to wait after interfaces participating in the test are all UP +WAIT_TIME=5 +# Whether to pause on failure or not. +PAUSE_ON_FAIL=no +# Whether to pause on cleanup or not. +PAUSE_ON_CLEANUP=no diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh new file mode 100644 index 000000000000..9412c894b74e --- /dev/null +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -0,0 +1,282 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Defines + +# Can be overridden by the configuration file. +PING=${PING:=ping} +PING6=${PING6:=ping6} +WAIT_TIME=${WAIT_TIME:=5} +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} +PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} + +if [[ -f forwarding.config ]]; then + source forwarding.config +fi + +############################################################################## +# Sanity checks + +if [[ "$(id -u)" -ne 0 ]]; then + echo "SKIP: need root privileges" + exit 0 +fi + +tc -j &> /dev/null +if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old, missing JSON support" + exit 0 +fi + +if [[ ! -x "$(command -v jq)" ]]; then + echo "SKIP: jq not installed" + exit 0 +fi + +if [[ ! -v NUM_NETIFS ]]; then + echo "SKIP: importer does not define "NUM_NETIFS"" + exit 0 +fi + +############################################################################## +# Network interfaces configuration + +for i in $(eval echo {1..$NUM_NETIFS}); do + ip link show dev ${NETIFS[p$i]} &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: could not find all required interfaces" + exit 0 + fi +done + +############################################################################## +# Helpers + +# Exit status to return at the end. Set in case one of the tests fails. +EXIT_STATUS=0 +# Per-test return value. Clear at the beginning of each test. +RET=0 + +check_err() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -ne 0 ]]; then + RET=$err + retmsg=$msg + fi +} + +check_fail() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -eq 0 ]]; then + RET=1 + retmsg=$msg + fi +} + +log_test() +{ + local test_name=$1 + local opt_str=$2 + + if [[ $# -eq 2 ]]; then + opt_str="($opt_str)" + fi + + if [[ $RET -ne 0 ]]; then + EXIT_STATUS=1 + printf "TEST: %-60s [FAIL]\n" "$test_name $opt_str" + if [[ ! -z "$retmsg" ]]; then + printf "\t%s\n" "$retmsg" + fi + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo "Hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + return 1 + fi + + printf "TEST: %-60s [PASS]\n" "$test_name $opt_str" + return 0 +} + +setup_wait() +{ + for i in $(eval echo {1..$NUM_NETIFS}); do + while true; do + ip link show dev ${NETIFS[p$i]} up \ + | grep 'state UP' &> /dev/null + if [[ $? -ne 0 ]]; then + sleep 1 + else + break + fi + done + done + + # Make sure links are ready. + sleep $WAIT_TIME +} + +pre_cleanup() +{ + if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then + echo "Pausing before cleanup, hit any key to continue" + read + fi +} + +vrf_prepare() +{ + ip -4 rule add pref 32765 table local + ip -4 rule del pref 0 + ip -6 rule add pref 32765 table local + ip -6 rule del pref 0 +} + +vrf_cleanup() +{ + ip -6 rule add pref 0 table local + ip -6 rule del pref 32765 + ip -4 rule add pref 0 table local + ip -4 rule del pref 32765 +} + +__last_tb_id=0 +declare -A __TB_IDS + +__vrf_td_id_assign() +{ + local vrf_name=$1 + + __last_tb_id=$((__last_tb_id + 1)) + __TB_IDS[$vrf_name]=$__last_tb_id + return $__last_tb_id +} + +__vrf_td_id_lookup() +{ + local vrf_name=$1 + + return ${__TB_IDS[$vrf_name]} +} + +vrf_create() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_assign $vrf_name + tb_id=$? + + ip link add dev $vrf_name type vrf table $tb_id + ip -4 route add table $tb_id unreachable default metric 4278198272 + ip -6 route add table $tb_id unreachable default metric 4278198272 +} + +vrf_destroy() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_lookup $vrf_name + tb_id=$? + + ip -6 route del table $tb_id unreachable default metric 4278198272 + ip -4 route del table $tb_id unreachable default metric 4278198272 + ip link del dev $vrf_name +} + +__addr_add_del() +{ + local if_name=$1 + local add_del=$2 + local array + + shift + shift + array=("${@}") + + for addrstr in "${array[@]}"; do + ip address $add_del $addrstr dev $if_name + done +} + +simple_if_init() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + vrf_create $vrf_name + ip link set dev $if_name master $vrf_name + ip link set dev $vrf_name up + ip link set dev $if_name up + + __addr_add_del $if_name add "${array[@]}" +} + +simple_if_fini() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + __addr_add_del $if_name del "${array[@]}" + + ip link set dev $if_name down + vrf_destroy $vrf_name +} + +master_name_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["master"]' +} + +############################################################################## +# Tests + +ping_test() +{ + local if_name=$1 + local vrf_name + local dip=$2 + + RET=0 + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name $PING $dip -c 10 -i 0.1 -w 2 &> /dev/null + check_err $? + log_test "ping" +} + +ping6_test() +{ + local if_name=$1 + local vrf_name + local dip=$2 + + RET=0 + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name $PING6 $dip -c 10 -i 0.1 -w 2 &> /dev/null + check_err $? + log_test "ping6" +}