Removing a page from an initialized enclave involves three steps: (1) the user requests changing the page type to SGX_PAGE_TYPE_TRIM via the SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl(), (2) on success the ENCLU[EACCEPT] instruction is run from within the enclave to accept the page removal, (3) the user initiates the actual removal of the page via the SGX_IOC_ENCLAVE_REMOVE_PAGES ioctl().
Test two possible invalid accesses during the page removal flow: * Test the behavior when a request to remove the page by changing its type to SGX_PAGE_TYPE_TRIM completes successfully but instead of executing ENCLU[EACCEPT] from within the enclave the enclave attempts to read from the page. Even though the page is accessible from the page table entries its type is SGX_PAGE_TYPE_TRIM and thus not accessible according to SGX. The expected behavior is a page fault with the SGX flag set in the error code. * Test the behavior when the page type is changed successfully and ENCLU[EACCEPT] was run from within the enclave. The final ioctl(), SGX_IOC_ENCLAVE_REMOVE_PAGES, is omitted and replaced with an attempt to access the page. Even though the page is accessible from the page table entries its type is SGX_PAGE_TYPE_TRIM and thus not accessible according to SGX. The expected behavior is a page fault with the SGX flag set in the error code.
Acked-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Reinette Chatre reinette.chatre@intel.com --- Changes since V4: - Rename struct sgx_enclave_modify_type -> struct sgx_enclave_modify_types. (Jarkko)
Changes since V3: - Add Jarkko's Acked-by tag. - Rename SGX_IOC_ENCLAVE_MODIFY_TYPE to SGX_IOC_ENCLAVE_MODIFY_TYPES. (Jarkko) - User provides just page type to SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl(), replacing secinfo. (Jarkko) - Let the SKIP() call involving SGX_IOC_ENCLAVE_MODIFY_TYPES span two lines to address checkpatch.pl warning triggered by new longer name.
Changes since V2: - Rename struct sgx_enclave_modt -> struct sgx_enclave_modify_type
Changes since V1: - Update to support ioctl() name change (SGX_IOC_PAGE_MODT -> SGX_IOC_ENCLAVE_MODIFY_TYPE) and provide secinfo as parameter instead of just page type (Jarkko). - Use ioctl() instead of ioctl (Dave).
tools/testing/selftests/sgx/main.c | 243 +++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+)
diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c index 3a82bae915d1..2c69045253b2 100644 --- a/tools/testing/selftests/sgx/main.c +++ b/tools/testing/selftests/sgx/main.c @@ -1547,4 +1547,247 @@ TEST_F(enclave, remove_added_page_no_eaccept) EXPECT_EQ(remove_ioc.count, 0); }
+/* + * Request enclave page removal but instead of correctly following with + * EACCEPT a read attempt to page is made from within the enclave. + */ +TEST_F(enclave, remove_added_page_invalid_access) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct sgx_enclave_modify_types ioc; + unsigned long data_start; + int ret, errno_save; + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + /* + * Hardware (SGX2) and kernel support is needed for this test. Start + * with check that test has a chance of succeeding. + */ + memset(&ioc, 0, sizeof(ioc)); + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &ioc); + + if (ret == -1) { + if (errno == ENOTTY) + SKIP(return, + "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()"); + else if (errno == ENODEV) + SKIP(return, "System does not support SGX2"); + } + + /* + * Invalid parameters were provided during sanity check, + * expect command to fail. + */ + EXPECT_EQ(ret, -1); + + /* + * Page that will be removed is the second data page in the .data + * segment. This forms part of the local encl_buffer within the + * enclave. + */ + data_start = self->encl.encl_base + + encl_get_data_offset(&self->encl) + PAGE_SIZE; + + /* + * Sanity check that page at @data_start is writable before + * removing it. + * + * Start by writing MAGIC to test page. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = data_start; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory that was just written to, confirming that data + * previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = data_start; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* Start page removal by requesting change of page type to PT_TRIM. */ + memset(&ioc, 0, sizeof(ioc)); + + ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE; + ioc.length = PAGE_SIZE; + ioc.page_type = SGX_PAGE_TYPE_TRIM; + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &ioc); + errno_save = ret == -1 ? errno : 0; + + EXPECT_EQ(ret, 0); + EXPECT_EQ(errno_save, 0); + EXPECT_EQ(ioc.result, 0); + EXPECT_EQ(ioc.count, 4096); + + /* + * Read from page that was just removed. + */ + get_addr_op.value = 0; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + /* + * From kernel perspective the page is present but according to SGX the + * page should not be accessible so a #PF with SGX bit set is + * expected. + */ + + EXPECT_EQ(self->run.function, ERESUME); + EXPECT_EQ(self->run.exception_vector, 14); + EXPECT_EQ(self->run.exception_error_code, 0x8005); + EXPECT_EQ(self->run.exception_addr, data_start); +} + +/* + * Request enclave page removal and correctly follow with + * EACCEPT but do not follow with removal ioctl() but instead a read attempt + * to removed page is made from within the enclave. + */ +TEST_F(enclave, remove_added_page_invalid_access_after_eaccept) +{ + struct encl_op_get_from_addr get_addr_op; + struct encl_op_put_to_addr put_addr_op; + struct sgx_enclave_modify_types ioc; + struct encl_op_eaccept eaccept_op; + unsigned long data_start; + int ret, errno_save; + + ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata)); + + memset(&self->run, 0, sizeof(self->run)); + self->run.tcs = self->encl.encl_base; + + /* + * Hardware (SGX2) and kernel support is needed for this test. Start + * with check that test has a chance of succeeding. + */ + memset(&ioc, 0, sizeof(ioc)); + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &ioc); + + if (ret == -1) { + if (errno == ENOTTY) + SKIP(return, + "Kernel does not support SGX_IOC_ENCLAVE_MODIFY_TYPES ioctl()"); + else if (errno == ENODEV) + SKIP(return, "System does not support SGX2"); + } + + /* + * Invalid parameters were provided during sanity check, + * expect command to fail. + */ + EXPECT_EQ(ret, -1); + + /* + * Page that will be removed is the second data page in the .data + * segment. This forms part of the local encl_buffer within the + * enclave. + */ + data_start = self->encl.encl_base + + encl_get_data_offset(&self->encl) + PAGE_SIZE; + + /* + * Sanity check that page at @data_start is writable before + * removing it. + * + * Start by writing MAGIC to test page. + */ + put_addr_op.value = MAGIC; + put_addr_op.addr = data_start; + put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* + * Read memory that was just written to, confirming that data + * previously written (MAGIC) is present. + */ + get_addr_op.value = 0; + get_addr_op.addr = data_start; + get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + EXPECT_EQ(get_addr_op.value, MAGIC); + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + + /* Start page removal by requesting change of page type to PT_TRIM. */ + memset(&ioc, 0, sizeof(ioc)); + + ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE; + ioc.length = PAGE_SIZE; + ioc.page_type = SGX_PAGE_TYPE_TRIM; + + ret = ioctl(self->encl.fd, SGX_IOC_ENCLAVE_MODIFY_TYPES, &ioc); + errno_save = ret == -1 ? errno : 0; + + EXPECT_EQ(ret, 0); + EXPECT_EQ(errno_save, 0); + EXPECT_EQ(ioc.result, 0); + EXPECT_EQ(ioc.count, 4096); + + eaccept_op.epc_addr = (unsigned long)data_start; + eaccept_op.ret = 0; + eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED; + eaccept_op.header.type = ENCL_OP_EACCEPT; + + EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0); + + EXPECT_EEXIT(&self->run); + EXPECT_EQ(self->run.exception_vector, 0); + EXPECT_EQ(self->run.exception_error_code, 0); + EXPECT_EQ(self->run.exception_addr, 0); + EXPECT_EQ(eaccept_op.ret, 0); + + /* Skip ioctl() to remove page. */ + + /* + * Read from page that was just removed. + */ + get_addr_op.value = 0; + + EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0); + + /* + * From kernel perspective the page is present but according to SGX the + * page should not be accessible so a #PF with SGX bit set is + * expected. + */ + + EXPECT_EQ(self->run.function, ERESUME); + EXPECT_EQ(self->run.exception_vector, 14); + EXPECT_EQ(self->run.exception_error_code, 0x8005); + EXPECT_EQ(self->run.exception_addr, data_start); +} + TEST_HARNESS_MAIN