Add a test case that verifies that we can enumerate the SVE vector lengths on systems where we detect SVE, and that those SVE vector lengths are valid. This program was written by Dave Martin and adapted to kselftest by me.

Signed-off-by: Mark Brown broonie@kernel.org --- .../selftests/arm64/fp/sve-probe-vls.c | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 tools/testing/selftests/arm64/fp/sve-probe-vls.c

diff --git a/tools/testing/selftests/arm64/fp/sve-probe-vls.c b/tools/testing/selftests/arm64/fp/sve-probe-vls.c new file mode 100644 index 000000000000..b29cbc642c57 --- /dev/null +++ b/tools/testing/selftests/arm64/fp/sve-probe-vls.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015-2020 ARM Limited. + * Original author: Dave Martin Dave.Martin@arm.com + */ +#include <assert.h> +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/auxv.h> +#include <sys/prctl.h> +#include <asm/sigcontext.h> + +#include "../../kselftest.h" + +int main(int argc, char **argv) +{ + unsigned int vq; + int vl; + static unsigned int vqs[SVE_VQ_MAX]; + unsigned int nvqs = 0; + + ksft_print_header(); + ksft_set_plan(2); + + if (!(getauxval(AT_HWCAP) & HWCAP_SVE)) + ksft_exit_skip("SVE not available"); + + /* + * Enumerate up to SVE_VQ_MAX vector lengths + */ + for (vq = SVE_VQ_MAX; vq > 0; --vq) { + vl = prctl(PR_SVE_SET_VL, vq * 16); + if (vl == -1) + ksft_exit_fail_msg("PR_SVE_SET_VL failed: %s (%d)\n", + strerror(errno), errno); + + vl &= PR_SVE_VL_LEN_MASK; + + if (!sve_vl_valid(vl)) + ksft_exit_fail_msg("VL %d invalid\n", vl); + vq = sve_vq_from_vl(vl); + + if (!(nvqs < SVE_VQ_MAX)) + ksft_exit_fail_msg("Too many VLs %u >= SVE_VQ_MAX\n", + nvqs); + vqs[nvqs++] = vq; + } + ksft_test_result_pass("Enumerated %d vector lengths\n", nvqs); + ksft_test_result_pass("All vector lengths valid\n"); + + /* Print out the vector lengths in ascending order: */ + while (nvqs--) + ksft_print_msg("%u\n", 16 * vqs[nvqs]); + + ksft_exit_pass(); +}

Add programs sve-test and fpsimd-test which spin reading and writing to the SVE and FPSIMD registers, verifying the operations they perform. The intended use is to leave them running to stress the context switch code's handling of these registers which isn't compatible with what kselftest does so they're not integrated into the framework but there's no other obvious testsuite where they fit so let's store them here.

These tests were written by Dave Martin and lightly adapted by me.

Signed-off-by: Mark Brown broonie@kernel.org --- .../testing/selftests/arm64/fp/asm-offsets.h | 11 + tools/testing/selftests/arm64/fp/assembler.h | 57 ++ .../testing/selftests/arm64/fp/fpsimd-test.S | 482 +++++++++++++ tools/testing/selftests/arm64/fp/sve-test.S | 672 ++++++++++++++++++ 4 files changed, 1222 insertions(+) create mode 100644 tools/testing/selftests/arm64/fp/asm-offsets.h create mode 100644 tools/testing/selftests/arm64/fp/assembler.h create mode 100644 tools/testing/selftests/arm64/fp/fpsimd-test.S create mode 100644 tools/testing/selftests/arm64/fp/sve-test.S

diff --git a/tools/testing/selftests/arm64/fp/asm-offsets.h b/tools/testing/selftests/arm64/fp/asm-offsets.h new file mode 100644 index 000000000000..a180851496ec --- /dev/null +++ b/tools/testing/selftests/arm64/fp/asm-offsets.h @@ -0,0 +1,11 @@ +#define sa_sz 32 +#define sa_flags 8 +#define sa_handler 0 +#define sa_mask_sz 8 +#define SIGUSR1 10 +#define SIGTERM 15 +#define SIGINT 2 +#define SIGABRT 6 +#define SA_NODEFER 1073741824 +#define SA_SIGINFO 4 +#define ucontext_regs 184 diff --git a/tools/testing/selftests/arm64/fp/assembler.h b/tools/testing/selftests/arm64/fp/assembler.h new file mode 100644 index 000000000000..8944f2189206 --- /dev/null +++ b/tools/testing/selftests/arm64/fp/assembler.h @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015-2019 ARM Limited. +// Original author: Dave Martin Dave.Martin@arm.com + +#ifndef ASSEMBLER_H +#define ASSEMBLER_H + +.macro __for from:req, to:req + .if (\from) == (\to) + _for__body %\from + .else + __for \from, %(\from) + ((\to) - (\from)) / 2 + __for %(\from) + ((\to) - (\from)) / 2 + 1, \to + .endif +.endm + +.macro _for var:req, from:req, to:req, insn:vararg + .macro _for__body \var:req + .noaltmacro + \insn + .altmacro + .endm + + .altmacro + __for \from, \to + .noaltmacro + + .purgem _for__body +.endm + +.macro function name + .macro endfunction + .type \name, @function + .purgem endfunction + .endm +\name: +.endm + +.macro define_accessor name, num, insn + .macro \name()_entry n + \insn \n, 1 + ret + .endm + +function \name + adr x2, .L__accessor_tbl@ + add x2, x2, x0, lsl #3 + br x2 + +.L__accessor_tbl@: + _for x, 0, (\num) - 1, \name()_entry \x +endfunction + + .purgem \name()_entry +.endm + +#endif /* ! ASSEMBLER_H */ diff --git a/tools/testing/selftests/arm64/fp/fpsimd-test.S b/tools/testing/selftests/arm64/fp/fpsimd-test.S new file mode 100644 index 000000000000..1c5556bdd11d --- /dev/null +++ b/tools/testing/selftests/arm64/fp/fpsimd-test.S @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015-2019 ARM Limited. +// Original author: Dave Martin Dave.Martin@arm.com +// +// Simple FPSIMD context switch test +// Repeatedly writes unique test patterns into each FPSIMD register +// and reads them back to verify integrity. +// +// for x in `seq 1 NR_CPUS`; do fpsimd-test & pids=$pids\ $! ; done +// (leave it running for as long as you want...) +// kill $pids + +#include <asm/unistd.h> +#include "assembler.h" +#include "asm-offsets.h" + +#define NVR 32 +#define MAXVL_B (128 / 8) + +.macro _vldr Vn:req, Xt:req + ld1 {v\Vn().2d}, [x\Xt] +.endm + +.macro _vstr Vn:req, Xt:req + st1 {v\Vn().2d}, [x\Xt] +.endm + +// Generate accessor functions to read/write programmatically selected +// FPSIMD registers. +// x0 is the register index to access +// x1 is the memory address to read from (getv,setp) or store to (setv,setp) +// All clobber x0-x2 +define_accessor setv, NVR, _vldr +define_accessor getv, NVR, _vstr + +// Print a single character x0 to stdout +// Clobbers x0-x2,x8 +function putc + str x0, [sp, #-16]! + + mov x0, #1 // STDOUT_FILENO + mov x1, sp + mov x2, #1 + mov x8, #__NR_write + svc #0 + + add sp, sp, #16 + ret +endfunction + +// Print a NUL-terminated string starting at address x0 to stdout +// Clobbers x0-x3,x8 +function puts + mov x1, x0 + + mov x2, #0 +0: ldrb w3, [x0], #1 + cbz w3, 1f + add x2, x2, #1 + b 0b + +1: mov w0, #1 // STDOUT_FILENO + mov x8, #__NR_write + svc #0 + + ret +endfunction + +// Utility macro to print a literal string +// Clobbers x0-x4,x8 +.macro puts string + .pushsection .rodata.str1.1, "aMS", 1 +.L__puts_literal@: .string "\string" + .popsection + + ldr x0, =.L__puts_literal@ + bl puts +.endm + +// Print an unsigned decimal number x0 to stdout +// Clobbers x0-x4,x8 +function putdec + mov x1, sp + str x30, [sp, #-32]! // Result can't be > 20 digits + + mov x2, #0 + strb w2, [x1, #-1]! // Write the NUL terminator + + mov x2, #10 +0: udiv x3, x0, x2 // div-mod loop to generate the digits + msub x0, x3, x2, x0 + add w0, w0, #'0' + strb w0, [x1, #-1]! + mov x0, x3 + cbnz x3, 0b + + ldrb w0, [x1] + cbnz w0, 1f + mov w0, #'0' // Print "0" for 0, not "" + strb w0, [x1, #-1]! + +1: mov x0, x1 + bl puts + + ldr x30, [sp], #32 + ret +endfunction + +// Print an unsigned decimal number x0 to stdout, followed by a newline +// Clobbers x0-x5,x8 +function putdecn + mov x5, x30 + + bl putdec + mov x0, #'\n' + bl putc + + ret x5 +endfunction + + +// Clobbers x0-x3,x8 +function puthexb + str x30, [sp, #-0x10]! + + mov w3, w0 + lsr w0, w0, #4 + bl puthexnibble + mov w0, w3 + + ldr x30, [sp], #0x10 + // fall through to puthexnibble +endfunction +// Clobbers x0-x2,x8 +function puthexnibble + and w0, w0, #0xf + cmp w0, #10 + blo 1f + add w0, w0, #'a' - ('9' + 1) +1: add w0, w0, #'0' + b putc +endfunction + +// x0=data in, x1=size in, clobbers x0-x5,x8 +function dumphex + str x30, [sp, #-0x10]! + + mov x4, x0 + mov x5, x1 + +0: subs x5, x5, #1 + b.lo 1f + ldrb w0, [x4], #1 + bl puthexb + b 0b + +1: ldr x30, [sp], #0x10 + ret +endfunction + +// Declare some storate space to shadow the SVE register contents: +.pushsection .text +.data +.align 4 +vref: + .space MAXVL_B * NVR +scratch: + .space MAXVL_B +.popsection + +// Trivial memory copy: copy x2 bytes, starting at address x1, to address x0. +// Clobbers x0-x3 +function memcpy + cmp x2, #0 + b.eq 1f +0: ldrb w3, [x1], #1 + strb w3, [x0], #1 + subs x2, x2, #1 + b.ne 0b +1: ret +endfunction + +// Generate a test pattern for storage in SVE registers +// x0: pid (16 bits) +// x1: register number (6 bits) +// x2: generation (4 bits) +function pattern + orr w1, w0, w1, lsl #16 + orr w2, w1, w2, lsl #28 + + ldr x0, =scratch + mov w1, #MAXVL_B / 4 + +0: str w2, [x0], #4 + add w2, w2, #(1 << 22) + subs w1, w1, #1 + bne 0b + + ret +endfunction + +// Get the address of shadow data for FPSIMD V-register V<xn> +.macro _adrv xd, xn, nrtmp + ldr \xd, =vref + mov x\nrtmp, #16 + madd \xd, x\nrtmp, \xn, \xd +.endm + +// Set up test pattern in a FPSIMD V-register +// x0: pid +// x1: register number +// x2: generation +function setup_vreg + mov x4, x30 + + mov x6, x1 + bl pattern + _adrv x0, x6, 2 + mov x5, x0 + ldr x1, =scratch + bl memcpy + + mov x0, x6 + mov x1, x5 + bl setv + + ret x4 +endfunction + +// Fill x1 bytes starting at x0 with 0xae (for canary purposes) +// Clobbers x1, x2. +function memfill_ae + mov w2, #0xae + b memfill +endfunction + +// Fill x1 bytes starting at x0 with 0. +// Clobbers x1, x2. +function memclr + mov w2, #0 +endfunction + // fall through to memfill + +// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2 +// Clobbers x1 +function memfill + cmp x1, #0 + b.eq 1f + +0: strb w2, [x0], #1 + subs x1, x1, #1 + b.ne 0b + +1: ret +endfunction + +// Trivial memory compare: compare x2 bytes starting at address x0 with +// bytes starting at address x1. +// Returns only if all bytes match; otherwise, the program is aborted. +// Clobbers x0-x5. +function memcmp + cbz x2, 1f + + mov x5, #0 +0: ldrb w3, [x0, x5] + ldrb w4, [x1, x5] + add x5, x5, #1 + cmp w3, w4 + b.ne barf + subs x2, x2, #1 + b.ne 0b + +1: ret +endfunction + +// Verify that a FPSIMD V-register matches its shadow in memory, else abort +// x0: reg number +// Clobbers x0-x5. +function check_vreg + mov x3, x30 + + _adrv x5, x0, 6 + mov x4, x0 + ldr x7, =scratch + + mov x0, x7 + mov x1, x6 + bl memfill_ae + + mov x0, x4 + mov x1, x7 + bl getv + + mov x0, x5 + mov x1, x7 + mov x2, x6 + mov x30, x3 + b memcmp +endfunction + +// Any SVE register modified here can cause corruption in the main +// thread -- but *only* the registers modified here. +function irritator_handler + // Increment the irritation signal count (x23): + ldr x0, [x2, #ucontext_regs + 8 * 23] + add x0, x0, #1 + str x0, [x2, #ucontext_regs + 8 * 23] + + // Corrupt some random V-regs + adr x0, .text + (irritator_handler - .text) / 16 * 16 + movi v0.8b, #7 + movi v9.16b, #9 + movi v31.8b, #31 + + ret +endfunction + +function terminate_handler + mov w21, w0 + mov x20, x2 + + puts "Terminated by signal " + mov w0, w21 + bl putdec + puts ", no error, iterations=" + ldr x0, [x20, #ucontext_regs + 8 * 22] + bl putdec + puts ", signals=" + ldr x0, [x20, #ucontext_regs + 8 * 23] + bl putdecn + + mov x0, #0 + mov x8, #__NR_exit + svc #0 +endfunction + +// w0: signal number +// x1: sa_action +// w2: sa_flags +// Clobbers x0-x6,x8 +function setsignal + str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]! + + mov w4, w0 + mov x5, x1 + mov w6, w2 + + add x0, sp, #16 + mov x1, #sa_sz + bl memclr + + mov w0, w4 + add x1, sp, #16 + str w6, [x1, #sa_flags] + str x5, [x1, #sa_handler] + mov x2, #0 + mov x3, #sa_mask_sz + mov x8, #__NR_rt_sigaction + svc #0 + + cbz w0, 1f + + puts "sigaction failure\n" + b .Labort + +1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16) + ret +endfunction + +// Main program entry point +.globl _start +function _start +_start: + // Sanity-check and report the vector length + + mov x19, #128 + cmp x19, #128 + b.lo 1f + cmp x19, #2048 + b.hi 1f + tst x19, #(8 - 1) + b.eq 2f + +1: puts "Bad vector length: " + mov x0, x19 + bl putdecn + b .Labort + +2: puts "Vector length:\t" + mov x0, x19 + bl putdec + puts " bits\n" + + // Obtain our PID, to ensure test pattern uniqueness between processes + + mov x8, #__NR_getpid + svc #0 + mov x20, x0 + + puts "PID:\t" + mov x0, x20 + bl putdecn + + mov x23, #0 // Irritation signal count + + mov w0, #SIGINT + adr x1, terminate_handler + mov w2, #SA_SIGINFO + bl setsignal + + mov w0, #SIGTERM + adr x1, terminate_handler + mov w2, #SA_SIGINFO + bl setsignal + + mov w0, #SIGUSR1 + adr x1, irritator_handler + mov w2, #SA_SIGINFO + orr w2, w2, #SA_NODEFER + bl setsignal + + mov x22, #0 // generation number, increments per iteration +.Ltest_loop: + + mov x21, #0 // Set up V-regs & shadow with test pattern +0: mov x0, x20 + mov x1, x21 + and x2, x22, #0xf + bl setup_vreg + add x21, x21, #1 + cmp x21, #NVR + b.lo 0b + +// Can't do this when SVE state is volatile across SVC: + mov x8, #__NR_sched_yield // Encourage preemption + svc #0 + + mov x21, #0 +0: mov x0, x21 + bl check_vreg + add x21, x21, #1 + cmp x21, #NVR + b.lo 0b + + add x22, x22, #1 + b .Ltest_loop + +.Labort: + mov x0, #0 + mov x1, #SIGABRT + mov x8, #__NR_kill + svc #0 +endfunction + +function barf + mov x10, x0 // expected data + mov x11, x1 // actual data + mov x12, x2 // data size + + puts "Mistatch: PID=" + mov x0, x20 + bl putdec + puts ", iteration=" + mov x0, x22 + bl putdec + puts ", reg=" + mov x0, x21 + bl putdecn + puts "\tExpected [" + mov x0, x10 + mov x1, x12 + bl dumphex + puts "]\n\tGot [" + mov x0, x11 + mov x1, x12 + bl dumphex + puts "]\n" + + mov x8, #__NR_exit + mov x1, #1 + svc #0 +endfunction diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S new file mode 100644 index 000000000000..f95074c9b48b --- /dev/null +++ b/tools/testing/selftests/arm64/fp/sve-test.S @@ -0,0 +1,672 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2015-2019 ARM Limited. +// Original author: Dave Martin Dave.Martin@arm.com +// +// Simple Scalable Vector Extension context switch test +// Repeatedly writes unique test patterns into each SVE register +// and reads them back to verify integrity. +// +// for x in `seq 1 NR_CPUS`; do sve-test & pids=$pids\ $! ; done +// (leave it running for as long as you want...) +// kill $pids + +#include <asm/unistd.h> +#include "assembler.h" +#include "asm-offsets.h" + +#define NZR 32 +#define NPR 16 +#define MAXVL_B (2048 / 8) + +.arch_extension sve + +.macro _sve_ldr_v zt, xn + ldr z\zt, [x\xn] +.endm + +.macro _sve_str_v zt, xn + str z\zt, [x\xn] +.endm + +.macro _sve_ldr_p pt, xn + ldr p\pt, [x\xn] +.endm + +.macro _sve_str_p pt, xn + str p\pt, [x\xn] +.endm + +// Generate accessor functions to read/write programmatically selected +// SVE registers. +// x0 is the register index to access +// x1 is the memory address to read from (getz,setp) or store to (setz,setp) +// All clobber x0-x2 +define_accessor setz, NZR, _sve_ldr_v +define_accessor getz, NZR, _sve_str_v +define_accessor setp, NPR, _sve_ldr_p +define_accessor getp, NPR, _sve_str_p + +// Print a single character x0 to stdout +// Clobbers x0-x2,x8 +function putc + str x0, [sp, #-16]! + + mov x0, #1 // STDOUT_FILENO + mov x1, sp + mov x2, #1 + mov x8, #__NR_write + svc #0 + + add sp, sp, #16 + ret +endfunction + +// Print a NUL-terminated string starting at address x0 to stdout +// Clobbers x0-x3,x8 +function puts + mov x1, x0 + + mov x2, #0 +0: ldrb w3, [x0], #1 + cbz w3, 1f + add x2, x2, #1 + b 0b + +1: mov w0, #1 // STDOUT_FILENO + mov x8, #__NR_write + svc #0 + + ret +endfunction + +// Utility macro to print a literal string +// Clobbers x0-x4,x8 +.macro puts string + .pushsection .rodata.str1.1, "aMS", 1 +.L__puts_literal@: .string "\string" + .popsection + + ldr x0, =.L__puts_literal@ + bl puts +.endm + +// Print an unsigned decimal number x0 to stdout +// Clobbers x0-x4,x8 +function putdec + mov x1, sp + str x30, [sp, #-32]! // Result can't be > 20 digits + + mov x2, #0 + strb w2, [x1, #-1]! // Write the NUL terminator + + mov x2, #10 +0: udiv x3, x0, x2 // div-mod loop to generate the digits + msub x0, x3, x2, x0 + add w0, w0, #'0' + strb w0, [x1, #-1]! + mov x0, x3 + cbnz x3, 0b + + ldrb w0, [x1] + cbnz w0, 1f + mov w0, #'0' // Print "0" for 0, not "" + strb w0, [x1, #-1]! + +1: mov x0, x1 + bl puts + + ldr x30, [sp], #32 + ret +endfunction + +// Print an unsigned decimal number x0 to stdout, followed by a newline +// Clobbers x0-x5,x8 +function putdecn + mov x5, x30 + + bl putdec + mov x0, #'\n' + bl putc + + ret x5 +endfunction + +// Clobbers x0-x3,x8 +function puthexb + str x30, [sp, #-0x10]! + + mov w3, w0 + lsr w0, w0, #4 + bl puthexnibble + mov w0, w3 + + ldr x30, [sp], #0x10 + // fall through to puthexnibble +endfunction +// Clobbers x0-x2,x8 +function puthexnibble + and w0, w0, #0xf + cmp w0, #10 + blo 1f + add w0, w0, #'a' - ('9' + 1) +1: add w0, w0, #'0' + b putc +endfunction + +// x0=data in, x1=size in, clobbers x0-x5,x8 +function dumphex + str x30, [sp, #-0x10]! + + mov x4, x0 + mov x5, x1 + +0: subs x5, x5, #1 + b.lo 1f + ldrb w0, [x4], #1 + bl puthexb + b 0b + +1: ldr x30, [sp], #0x10 + ret +endfunction + +// Declare some storate space to shadow the SVE register contents: +.pushsection .text +.data +.align 4 +zref: + .space MAXVL_B * NZR +pref: + .space MAXVL_B / 8 * NPR +ffrref: + .space MAXVL_B / 8 +scratch: + .space MAXVL_B +.popsection + +// Trivial memory copy: copy x2 bytes, starting at address x1, to address x0. +// Clobbers x0-x3 +function memcpy + cmp x2, #0 + b.eq 1f +0: ldrb w3, [x1], #1 + strb w3, [x0], #1 + subs x2, x2, #1 + b.ne 0b +1: ret +endfunction + +// Generate a test pattern for storage in SVE registers +// x0: pid (16 bits) +// x1: register number (6 bits) +// x2: generation (4 bits) + +// These values are used to constuct a 32-bit pattern that is repeated in the +// scratch buffer as many times as will fit: +// bits 31:28 generation number (increments once per test_loop) +// bits 27:22 32-bit lane index +// bits 21:16 register number +// bits 15: 0 pid + +function pattern + orr w1, w0, w1, lsl #16 + orr w2, w1, w2, lsl #28 + + ldr x0, =scratch + mov w1, #MAXVL_B / 4 + +0: str w2, [x0], #4 + add w2, w2, #(1 << 22) + subs w1, w1, #1 + bne 0b + + ret +endfunction + +// Get the address of shadow data for SVE Z-register Z<xn> +.macro _adrz xd, xn, nrtmp + ldr \xd, =zref + rdvl x\nrtmp, #1 + madd \xd, x\nrtmp, \xn, \xd +.endm + +// Get the address of shadow data for SVE P-register P<xn - NZR> +.macro _adrp xd, xn, nrtmp + ldr \xd, =pref + rdvl x\nrtmp, #1 + lsr x\nrtmp, x\nrtmp, #3 + sub \xn, \xn, #NZR + madd \xd, x\nrtmp, \xn, \xd +.endm + +// Set up test pattern in a SVE Z-register +// x0: pid +// x1: register number +// x2: generation +function setup_zreg + mov x4, x30 + + mov x6, x1 + bl pattern + _adrz x0, x6, 2 + mov x5, x0 + ldr x1, =scratch + bl memcpy + + mov x0, x6 + mov x1, x5 + bl setz + + ret x4 +endfunction + +// Set up test pattern in a SVE P-register +// x0: pid +// x1: register number +// x2: generation +function setup_preg + mov x4, x30 + + mov x6, x1 + bl pattern + _adrp x0, x6, 2 + mov x5, x0 + ldr x1, =scratch + bl memcpy + + mov x0, x6 + mov x1, x5 + bl setp + + ret x4 +endfunction + +// Set up test pattern in the FFR +// x0: pid +// x2: generation +// Beware: corrupts P0. +function setup_ffr + mov x4, x30 + + bl pattern + ldr x0, =ffrref + ldr x1, =scratch + rdvl x2, #1 + lsr x2, x2, #3 + bl memcpy + + mov x0, #0 + ldr x1, =ffrref + bl setp + + wrffr p0.b + + ret x4 +endfunction + +// Fill x1 bytes starting at x0 with 0xae (for canary purposes) +// Clobbers x1, x2. +function memfill_ae + mov w2, #0xae + b memfill +endfunction + +// Fill x1 bytes starting at x0 with 0. +// Clobbers x1, x2. +function memclr + mov w2, #0 +endfunction + // fall through to memfill + +// Trivial memory fill: fill x1 bytes starting at address x0 with byte w2 +// Clobbers x1 +function memfill + cmp x1, #0 + b.eq 1f + +0: strb w2, [x0], #1 + subs x1, x1, #1 + b.ne 0b + +1: ret +endfunction + +// Trivial memory compare: compare x2 bytes starting at address x0 with +// bytes starting at address x1. +// Returns only if all bytes match; otherwise, the program is aborted. +// Clobbers x0-x5. +function memcmp + cbz x2, 2f + + stp x0, x1, [sp, #-0x20]! + str x2, [sp, #0x10] + + mov x5, #0 +0: ldrb w3, [x0, x5] + ldrb w4, [x1, x5] + add x5, x5, #1 + cmp w3, w4 + b.ne 1f + subs x2, x2, #1 + b.ne 0b + +1: ldr x2, [sp, #0x10] + ldp x0, x1, [sp], #0x20 + b.ne barf + +2: ret +endfunction + +// Verify that a SVE Z-register matches its shadow in memory, else abort +// x0: reg number +// Clobbers x0-x7. +function check_zreg + mov x3, x30 + + _adrz x5, x0, 6 + mov x4, x0 + ldr x7, =scratch + + mov x0, x7 + mov x1, x6 + bl memfill_ae + + mov x0, x4 + mov x1, x7 + bl getz + + mov x0, x5 + mov x1, x7 + mov x2, x6 + mov x30, x3 + b memcmp +endfunction + +// Verify that a SVE P-register matches its shadow in memory, else abort +// x0: reg number +// Clobbers x0-x7. +function check_preg + mov x3, x30 + + _adrp x5, x0, 6 + mov x4, x0 + ldr x7, =scratch + + mov x0, x7 + mov x1, x6 + bl memfill_ae + + mov x0, x4 + mov x1, x7 + bl getp + + mov x0, x5 + mov x1, x7 + mov x2, x6 + mov x30, x3 + b memcmp +endfunction + +// Verify that the FFR matches its shadow in memory, else abort +// Beware -- corrupts P0. +// Clobbers x0-x5. +function check_ffr + mov x3, x30 + + ldr x4, =scratch + rdvl x5, #1 + lsr x5, x5, #3 + + mov x0, x4 + mov x1, x5 + bl memfill_ae + + rdffr p0.b + mov x0, #0 + mov x1, x4 + bl getp + + ldr x0, =ffrref + mov x1, x4 + mov x2, x5 + mov x30, x3 + b memcmp +endfunction + +// Any SVE register modified here can cause corruption in the main +// thread -- but *only* the registers modified here. +function irritator_handler + // Increment the irritation signal count (x23): + ldr x0, [x2, #ucontext_regs + 8 * 23] + add x0, x0, #1 + str x0, [x2, #ucontext_regs + 8 * 23] + + // Corrupt some random Z-regs + adr x0, .text + (irritator_handler - .text) / 16 * 16 + movi v0.8b, #1 + movi v9.16b, #2 + movi v31.8b, #3 + // And P0 + rdffr p0.b + // And FFR + wrffr p15.b + + ret +endfunction + +function terminate_handler + mov w21, w0 + mov x20, x2 + + puts "Terminated by signal " + mov w0, w21 + bl putdec + puts ", no error, iterations=" + ldr x0, [x20, #ucontext_regs + 8 * 22] + bl putdec + puts ", signals=" + ldr x0, [x20, #ucontext_regs + 8 * 23] + bl putdecn + + mov x0, #0 + mov x8, #__NR_exit + svc #0 +endfunction + +// w0: signal number +// x1: sa_action +// w2: sa_flags +// Clobbers x0-x6,x8 +function setsignal + str x30, [sp, #-((sa_sz + 15) / 16 * 16 + 16)]! + + mov w4, w0 + mov x5, x1 + mov w6, w2 + + add x0, sp, #16 + mov x1, #sa_sz + bl memclr + + mov w0, w4 + add x1, sp, #16 + str w6, [x1, #sa_flags] + str x5, [x1, #sa_handler] + mov x2, #0 + mov x3, #sa_mask_sz + mov x8, #__NR_rt_sigaction + svc #0 + + cbz w0, 1f + + puts "sigaction failure\n" + b .Labort + +1: ldr x30, [sp], #((sa_sz + 15) / 16 * 16 + 16) + ret +endfunction + +// Main program entry point +.globl _start +function _start +_start: + // Sanity-check and report the vector length + + rdvl x19, #8 + cmp x19, #128 + b.lo 1f + cmp x19, #2048 + b.hi 1f + tst x19, #(8 - 1) + b.eq 2f + +1: puts "Bad vector length: " + mov x0, x19 + bl putdecn + b .Labort + +2: puts "Vector length:\t" + mov x0, x19 + bl putdec + puts " bits\n" + + // Obtain our PID, to ensure test pattern uniqueness between processes + + mov x8, #__NR_getpid + svc #0 + mov x20, x0 + + puts "PID:\t" + mov x0, x20 + bl putdecn + + mov x23, #0 // Irritation signal count + + mov w0, #SIGINT + adr x1, terminate_handler + mov w2, #SA_SIGINFO + bl setsignal + + mov w0, #SIGTERM + adr x1, terminate_handler + mov w2, #SA_SIGINFO + bl setsignal + + mov w0, #SIGUSR1 + adr x1, irritator_handler + mov w2, #SA_SIGINFO + orr w2, w2, #SA_NODEFER + bl setsignal + + mov x22, #0 // generation number, increments per iteration +.Ltest_loop: + rdvl x0, #8 + cmp x0, x19 + b.ne vl_barf + + mov x21, #0 // Set up Z-regs & shadow with test pattern +0: mov x0, x20 + mov x1, x21 + and x2, x22, #0xf + bl setup_zreg + add x21, x21, #1 + cmp x21, #NZR + b.lo 0b + + mov x0, x20 // Set up FFR & shadow with test pattern + mov x1, #NZR + NPR + and x2, x22, #0xf + bl setup_ffr + +0: mov x0, x20 // Set up P-regs & shadow with test pattern + mov x1, x21 + and x2, x22, #0xf + bl setup_preg + add x21, x21, #1 + cmp x21, #NZR + NPR + b.lo 0b + +// Can't do this when SVE state is volatile across SVC: +// mov x8, #__NR_sched_yield // Encourage preemption +// svc #0 + + mov x21, #0 +0: mov x0, x21 + bl check_zreg + add x21, x21, #1 + cmp x21, #NZR + b.lo 0b + +0: mov x0, x21 + bl check_preg + add x21, x21, #1 + cmp x21, #NZR + NPR + b.lo 0b + + bl check_ffr + + add x22, x22, #1 + b .Ltest_loop + +.Labort: + mov x0, #0 + mov x1, #SIGABRT + mov x8, #__NR_kill + svc #0 +endfunction + +function barf +// fpsimd.c acitivty log dump hack +// ldr w0, =0xdeadc0de +// mov w8, #__NR_exit +// svc #0 +// end hack + mov x10, x0 // expected data + mov x11, x1 // actual data + mov x12, x2 // data size + + puts "Mistatch: PID=" + mov x0, x20 + bl putdec + puts ", iteration=" + mov x0, x22 + bl putdec + puts ", reg=" + mov x0, x21 + bl putdecn + puts "\tExpected [" + mov x0, x10 + mov x1, x12 + bl dumphex + puts "]\n\tGot [" + mov x0, x11 + mov x1, x12 + bl dumphex + puts "]\n" + + mov x8, #__NR_getpid + svc #0 +// fpsimd.c acitivty log dump hack +// ldr w0, =0xdeadc0de +// mov w8, #__NR_exit +// svc #0 +// ^ end of hack + mov x1, #SIGABRT + mov x8, #__NR_kill + svc #0 +// mov x8, #__NR_exit +// mov x1, #1 +// svc #0 +endfunction + +function vl_barf + mov x10, x0 + + puts "Bad active VL: " + mov x0, x10 + bl putdecn + + mov x8, #__NR_exit + mov x1, #1 + svc #0 +endfunction

Add wrapper scripts which invoke fpsimd-test and sve-test with several copies per CPU such that the context switch code will be appropriately exercised.

Signed-off-by: Mark Brown broonie@kernel.org --- .../testing/selftests/arm64/fp/fpsimd-stress | 60 +++++++++++++++++++ tools/testing/selftests/arm64/fp/sve-stress | 59 ++++++++++++++++++ 2 files changed, 119 insertions(+) create mode 100755 tools/testing/selftests/arm64/fp/fpsimd-stress create mode 100755 tools/testing/selftests/arm64/fp/sve-stress

diff --git a/tools/testing/selftests/arm64/fp/fpsimd-stress b/tools/testing/selftests/arm64/fp/fpsimd-stress new file mode 100755 index 000000000000..781b5b022eaf --- /dev/null +++ b/tools/testing/selftests/arm64/fp/fpsimd-stress @@ -0,0 +1,60 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2015-2019 ARM Limited. +# Original author: Dave Martin Dave.Martin@arm.com + +set -ue + +NR_CPUS=`nproc` + +pids= +logs= + +cleanup () { + trap - INT TERM CHLD + set +e + + if [ -n "$pids" ]; then + kill $pids + wait $pids + pids= + fi + + if [ -n "$logs" ]; then + cat $logs + rm $logs + logs= + fi +} + +interrupt () { + cleanup + exit 0 +} + +child_died () { + cleanup + exit 1 +} + +trap interrupt INT TERM EXIT +trap child_died CHLD + +for x in `seq 0 $((NR_CPUS * 4))`; do + log=`mktemp` + logs=$logs\ $log + ./fpsimd-test >$log & + pids=$pids\ $! +done + +# Wait for all child processes to be created: +sleep 10 + +while :; do + kill -USR1 $pids +done & +pids=$pids\ $! + +wait + +exit 1 diff --git a/tools/testing/selftests/arm64/fp/sve-stress b/tools/testing/selftests/arm64/fp/sve-stress new file mode 100755 index 000000000000..24dd0922cc02 --- /dev/null +++ b/tools/testing/selftests/arm64/fp/sve-stress @@ -0,0 +1,59 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2015-2019 ARM Limited. +# Original author: Dave Martin Dave.Martin@arm.com + +set -ue + +NR_CPUS=`nproc` + +pids= +logs= + +cleanup () { + trap - INT TERM CHLD + set +e + + if [ -n "$pids" ]; then + kill $pids + wait $pids + pids= + fi + + if [ -n "$logs" ]; then + cat $logs + rm $logs + logs= + fi +} + +interrupt () { + cleanup + exit 0 +} + +child_died () { + cleanup + exit 1 +} + +trap interrupt INT TERM EXIT + +for x in `seq 0 $((NR_CPUS * 4))`; do + log=`mktemp` + logs=$logs\ $log + ./sve-test >$log & + pids=$pids\ $! +done + +# Wait for all child processes to be created: +sleep 10 + +while :; do + kill -USR1 $pids +done & +pids=$pids\ $! + +wait + +exit 1