One of the nice things about network namespaces is that they allow one to easily create and test complex environments.
Unfortunately, these namespaces can not be used with actual switching ASICs, as their ports can not be migrated to other network namespaces (NETIF_F_NETNS_LOCAL) and most of them probably do not support the L1-separation provided by namespaces.
However, a similar kind of flexibility can be achieved by using VRFs and by looping the switch ports together. For example:
br0 + vrf-h1 | vrf-h2 + +---+----+ + | | | | 192.0.2.1/24 + + + + 192.0.2.2/24 swp1 swp2 swp3 swp4 + + + + | | | | +--------+ +--------+
The VRFs act as lightweight namespaces representing hosts connected to the switch.
This approach for testing switch ASICs has several advantages over the traditional method that requires multiple physical machines, to name a few:
1. Only the device under test (DUT) is being tested without noise from other system.
2. Ability to easily provision complex topologies. Testing bridging between 4-ports LAGs or 8-way ECMP requires many physical links that are not always available. With the VRF-based approach one merely needs to loopback more ports.
These tests are written with switch ASICs in mind, but they can be run on any Linux box using veth pairs to emulate physical loopbacks.
Changes since RFC: * Change location to net/forwarding instead of forwarding/ * Add ability to pause on failure * Add ability to pause on cleanup * Make configuration file optional * Make ping/ping6/mz configurable * Add more tc tests
Ido Schimmel (7): selftests: forwarding: Add initial testing framework selftests: forwarding: Add a test for FDB learning selftests: forwarding: Add a test for flooded traffic selftests: forwarding: Add a test for basic IPv4 and IPv6 routing selftests: forwarding: Create test topology for multipath routing selftests: forwarding: Test IPv4 weighted nexthops selftests: forwarding: Test IPv6 weighted nexthops
Jiri Pirko (7): selftests: forwarding: Add tc offload check helper selftests: forwarding: Add MAC get helper selftests: forwarding: Allow to get netdev interfaces names from commandline selftests: forwarding: Introduce tc flower matching tests selftests: forwarding: Introduce tc actions tests selftests: forwarding: Introduce basic tc chains tests selftests: forwarding: Introduce basic shared blocks tests
tools/testing/selftests/net/forwarding/.gitignore | 1 + tools/testing/selftests/net/forwarding/README | 56 +++ .../selftests/net/forwarding/bridge_vlan_aware.sh | 87 ++++ tools/testing/selftests/net/forwarding/config | 12 + .../net/forwarding/forwarding.config.sample | 31 ++ tools/testing/selftests/net/forwarding/lib.sh | 533 +++++++++++++++++++++ tools/testing/selftests/net/forwarding/router.sh | 125 +++++ .../selftests/net/forwarding/router_multipath.sh | 317 ++++++++++++ .../testing/selftests/net/forwarding/tc_actions.sh | 195 ++++++++ .../testing/selftests/net/forwarding/tc_chains.sh | 122 +++++ .../testing/selftests/net/forwarding/tc_common.sh | 23 + .../testing/selftests/net/forwarding/tc_flower.sh | 196 ++++++++ .../selftests/net/forwarding/tc_shblocks.sh | 122 +++++ 13 files changed, 1820 insertions(+) create mode 100644 tools/testing/selftests/net/forwarding/.gitignore create mode 100644 tools/testing/selftests/net/forwarding/README create mode 100755 tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh create mode 100644 tools/testing/selftests/net/forwarding/config create mode 100644 tools/testing/selftests/net/forwarding/forwarding.config.sample create mode 100644 tools/testing/selftests/net/forwarding/lib.sh create mode 100755 tools/testing/selftests/net/forwarding/router.sh create mode 100755 tools/testing/selftests/net/forwarding/router_multipath.sh create mode 100755 tools/testing/selftests/net/forwarding/tc_actions.sh create mode 100755 tools/testing/selftests/net/forwarding/tc_chains.sh create mode 100644 tools/testing/selftests/net/forwarding/tc_common.sh create mode 100755 tools/testing/selftests/net/forwarding/tc_flower.sh create mode 100755 tools/testing/selftests/net/forwarding/tc_shblocks.sh
Add initial framework to test packet forwarding functionality. The tests can run on actual devices using loop-backed cables or using veth pairs.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/.gitignore | 1 + tools/testing/selftests/net/forwarding/README | 56 ++++ .../selftests/net/forwarding/bridge_vlan_aware.sh | 83 ++++++ tools/testing/selftests/net/forwarding/config | 12 + .../net/forwarding/forwarding.config.sample | 31 +++ tools/testing/selftests/net/forwarding/lib.sh | 282 +++++++++++++++++++++ 6 files changed, 465 insertions(+) create mode 100644 tools/testing/selftests/net/forwarding/.gitignore create mode 100644 tools/testing/selftests/net/forwarding/README create mode 100755 tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh create mode 100644 tools/testing/selftests/net/forwarding/config create mode 100644 tools/testing/selftests/net/forwarding/forwarding.config.sample create mode 100644 tools/testing/selftests/net/forwarding/lib.sh
diff --git a/tools/testing/selftests/net/forwarding/.gitignore b/tools/testing/selftests/net/forwarding/.gitignore new file mode 100644 index 000000000000..a793eef5b876 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/.gitignore @@ -0,0 +1 @@ +forwarding.config diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README new file mode 100644 index 000000000000..4a0964c42860 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/README @@ -0,0 +1,56 @@ +Motivation +========== + +One of the nice things about network namespaces is that they allow one +to easily create and test complex environments. + +Unfortunately, these namespaces can not be used with actual switching +ASICs, as their ports can not be migrated to other network namespaces +(NETIF_F_NETNS_LOCAL) and most of them probably do not support the +L1-separation provided by namespaces. + +However, a similar kind of flexibility can be achieved by using VRFs and +by looping the switch ports together. For example: + + br0 + + + vrf-h1 | vrf-h2 + + +---+----+ + + | | | | + 192.0.2.1/24 + + + + 192.0.2.2/24 + swp1 swp2 swp3 swp4 + + + + + + | | | | + +--------+ +--------+ + +The VRFs act as lightweight namespaces representing hosts connected to +the switch. + +This approach for testing switch ASICs has several advantages over the +traditional method that requires multiple physical machines, to name a +few: + +1. Only the device under test (DUT) is being tested without noise from +other system. + +2. Ability to easily provision complex topologies. Testing bridging +between 4-ports LAGs or 8-way ECMP requires many physical links that are +not always available. With the VRF-based approach one merely needs to +loopback more ports. + +These tests are written with switch ASICs in mind, but they can be run +on any Linux box using veth pairs to emulate physical loopbacks. + +Guidelines for Writing Tests +============================ + +o Where possible, reuse an existing topology for different tests instead + of recreating the same topology. +o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and + RFC 5737, respectively. +o Where possible, tests shall be written so that they can be reused by + multiple topologies and added to lib.sh. +o Checks shall be added to lib.sh for any external dependencies. +o Code shall be checked using ShellCheck [1] prior to submission. + +1. https://www.shellcheck.net/ diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh new file mode 100755 index 000000000000..e6faa9548460 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -0,0 +1,83 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=4 +source lib.sh + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64 +} + +switch_create() +{ + ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev $swp2 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +switch_destroy() +{ + ip link set dev $swp2 down + ip link set dev $swp1 down + + ip link del dev br0 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +ping_test $h1 192.0.2.2 +ping6_test $h1 2001:db8:1::2 + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/config b/tools/testing/selftests/net/forwarding/config new file mode 100644 index 000000000000..5cd2aed97958 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/config @@ -0,0 +1,12 @@ +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NET_VRF=m +CONFIG_BPF_SYSCALL=y +CONFIG_CGROUP_BPF=y +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_ACT_GACT=m +CONFIG_VETH=m diff --git a/tools/testing/selftests/net/forwarding/forwarding.config.sample b/tools/testing/selftests/net/forwarding/forwarding.config.sample new file mode 100644 index 000000000000..ab235c124f20 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/forwarding.config.sample @@ -0,0 +1,31 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Topology description. p1 looped back to p2, p3 to p4 and so on. +declare -A NETIFS + +NETIFS[p1]=veth0 +NETIFS[p2]=veth1 +NETIFS[p3]=veth2 +NETIFS[p4]=veth3 +NETIFS[p5]=veth4 +NETIFS[p6]=veth5 +NETIFS[p7]=veth6 +NETIFS[p8]=veth7 + +############################################################################## +# Defines + +# IPv4 ping utility name +PING=ping +# IPv6 ping utility name. Some distributions use 'ping' for IPv6. +PING6=ping6 +# Packet generator. Some distributions use 'mz'. +MZ=mausezahn +# Time to wait after interfaces participating in the test are all UP +WAIT_TIME=5 +# Whether to pause on failure or not. +PAUSE_ON_FAIL=no +# Whether to pause on cleanup or not. +PAUSE_ON_CLEANUP=no diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh new file mode 100644 index 000000000000..9412c894b74e --- /dev/null +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -0,0 +1,282 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Defines + +# Can be overridden by the configuration file. +PING=${PING:=ping} +PING6=${PING6:=ping6} +WAIT_TIME=${WAIT_TIME:=5} +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} +PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} + +if [[ -f forwarding.config ]]; then + source forwarding.config +fi + +############################################################################## +# Sanity checks + +if [[ "$(id -u)" -ne 0 ]]; then + echo "SKIP: need root privileges" + exit 0 +fi + +tc -j &> /dev/null +if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old, missing JSON support" + exit 0 +fi + +if [[ ! -x "$(command -v jq)" ]]; then + echo "SKIP: jq not installed" + exit 0 +fi + +if [[ ! -v NUM_NETIFS ]]; then + echo "SKIP: importer does not define "NUM_NETIFS"" + exit 0 +fi + +############################################################################## +# Network interfaces configuration + +for i in $(eval echo {1..$NUM_NETIFS}); do + ip link show dev ${NETIFS[p$i]} &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: could not find all required interfaces" + exit 0 + fi +done + +############################################################################## +# Helpers + +# Exit status to return at the end. Set in case one of the tests fails. +EXIT_STATUS=0 +# Per-test return value. Clear at the beginning of each test. +RET=0 + +check_err() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -ne 0 ]]; then + RET=$err + retmsg=$msg + fi +} + +check_fail() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -eq 0 ]]; then + RET=1 + retmsg=$msg + fi +} + +log_test() +{ + local test_name=$1 + local opt_str=$2 + + if [[ $# -eq 2 ]]; then + opt_str="($opt_str)" + fi + + if [[ $RET -ne 0 ]]; then + EXIT_STATUS=1 + printf "TEST: %-60s [FAIL]\n" "$test_name $opt_str" + if [[ ! -z "$retmsg" ]]; then + printf "\t%s\n" "$retmsg" + fi + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo "Hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + return 1 + fi + + printf "TEST: %-60s [PASS]\n" "$test_name $opt_str" + return 0 +} + +setup_wait() +{ + for i in $(eval echo {1..$NUM_NETIFS}); do + while true; do + ip link show dev ${NETIFS[p$i]} up \ + | grep 'state UP' &> /dev/null + if [[ $? -ne 0 ]]; then + sleep 1 + else + break + fi + done + done + + # Make sure links are ready. + sleep $WAIT_TIME +} + +pre_cleanup() +{ + if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then + echo "Pausing before cleanup, hit any key to continue" + read + fi +} + +vrf_prepare() +{ + ip -4 rule add pref 32765 table local + ip -4 rule del pref 0 + ip -6 rule add pref 32765 table local + ip -6 rule del pref 0 +} + +vrf_cleanup() +{ + ip -6 rule add pref 0 table local + ip -6 rule del pref 32765 + ip -4 rule add pref 0 table local + ip -4 rule del pref 32765 +} + +__last_tb_id=0 +declare -A __TB_IDS + +__vrf_td_id_assign() +{ + local vrf_name=$1 + + __last_tb_id=$((__last_tb_id + 1)) + __TB_IDS[$vrf_name]=$__last_tb_id + return $__last_tb_id +} + +__vrf_td_id_lookup() +{ + local vrf_name=$1 + + return ${__TB_IDS[$vrf_name]} +} + +vrf_create() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_assign $vrf_name + tb_id=$? + + ip link add dev $vrf_name type vrf table $tb_id + ip -4 route add table $tb_id unreachable default metric 4278198272 + ip -6 route add table $tb_id unreachable default metric 4278198272 +} + +vrf_destroy() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_lookup $vrf_name + tb_id=$? + + ip -6 route del table $tb_id unreachable default metric 4278198272 + ip -4 route del table $tb_id unreachable default metric 4278198272 + ip link del dev $vrf_name +} + +__addr_add_del() +{ + local if_name=$1 + local add_del=$2 + local array + + shift + shift + array=("${@}") + + for addrstr in "${array[@]}"; do + ip address $add_del $addrstr dev $if_name + done +} + +simple_if_init() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + vrf_create $vrf_name + ip link set dev $if_name master $vrf_name + ip link set dev $vrf_name up + ip link set dev $if_name up + + __addr_add_del $if_name add "${array[@]}" +} + +simple_if_fini() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + __addr_add_del $if_name del "${array[@]}" + + ip link set dev $if_name down + vrf_destroy $vrf_name +} + +master_name_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["master"]' +} + +############################################################################## +# Tests + +ping_test() +{ + local if_name=$1 + local vrf_name + local dip=$2 + + RET=0 + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name $PING $dip -c 10 -i 0.1 -w 2 &> /dev/null + check_err $? + log_test "ping" +} + +ping6_test() +{ + local if_name=$1 + local vrf_name + local dip=$2 + + RET=0 + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name $PING6 $dip -c 10 -i 0.1 -w 2 &> /dev/null + check_err $? + log_test "ping6" +}
Send a packet with a specific destination MAC, make sure it was learned on the ingress port and then aged-out.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../selftests/net/forwarding/bridge_vlan_aware.sh | 5 +- tools/testing/selftests/net/forwarding/lib.sh | 92 ++++++++++++++++++++++ 2 files changed, 96 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index e6faa9548460..1ba119f28963 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -26,7 +26,9 @@ h2_destroy()
switch_create() { - ip link add dev br0 type bridge vlan_filtering 1 mcast_snooping 0 + # 10 Seconds ageing time. + ip link add dev br0 type bridge vlan_filtering 1 ageing_time 1000 \ + mcast_snooping 0
ip link set dev $swp1 master br0 ip link set dev $swp2 master br0 @@ -79,5 +81,6 @@ setup_wait
ping_test $h1 192.0.2.2 ping6_test $h1 2001:db8:1::2 +learning_test "br0" $swp1 $h1 $h2
exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 9412c894b74e..f02ab5a581e9 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -7,6 +7,7 @@ # Can be overridden by the configuration file. PING=${PING:=ping} PING6=${PING6:=ping6} +MZ=${MZ:=mausezahn} WAIT_TIME=${WAIT_TIME:=5} PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} @@ -34,6 +35,11 @@ if [[ ! -x "$(command -v jq)" ]]; then exit 0 fi
+if [[ ! -x "$(command -v $MZ)" ]]; then + echo "SKIP: $MZ not installed" + exit 0 +fi + if [[ ! -v NUM_NETIFS ]]; then echo "SKIP: importer does not define "NUM_NETIFS"" exit 0 @@ -250,6 +256,17 @@ master_name_get() ip -j link show dev $if_name | jq -r '.[]["master"]' }
+bridge_ageing_time_get() +{ + local ageing_time + local bridge=$1 + + # Need to divide by 100 to convert to seconds. + ageing_time=$(ip -j -d link show dev $bridge \ + | jq '.[]["linkinfo"]["info_data"]["ageing_time"]') + echo $((ageing_time / 100)) +} + ############################################################################## # Tests
@@ -280,3 +297,78 @@ ping6_test() check_err $? log_test "ping6" } + +learning_test() +{ + local mac=de:ad:be:ef:13:37 + local ageing_time + local br_port1=$2 # Connected to `host1_if`. + local host1_if=$3 + local host2_if=$4 + local bridge=$1 + + RET=0 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == "$mac")" &> /dev/null + check_fail $? "Found FDB record when should not" + + # Disable unknown unicast flooding on `br_port1` to make sure + # packets are only forwarded through the port after a matching + # FDB entry was installed. + bridge link set dev $br_port1 flood off + + tc qdisc add dev $host1_if ingress + tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ $host2_if -c 1 -p 64 -b $mac -t ip -q + sleep 1 + + tc -j -s filter show dev $host1_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + check_fail $? "Packet reached second host when should not" + + $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q + sleep 1 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == "$mac")" &> /dev/null + check_err $? "Did not find FDB record when should" + + $MZ $host2_if -c 1 -p 64 -b $mac -t ip -q + sleep 1 + + tc -j -s filter show dev $host1_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + check_err $? "Packet did not reach second host when should" + + # Wait for 10 seconds after the ageing time to make sure FDB + # record was aged-out. + ageing_time=$(bridge_ageing_time_get $bridge) + sleep $((ageing_time + 10)) + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == "$mac")" &> /dev/null + check_fail $? "Found FDB record when should not" + + bridge link set dev $br_port1 learning off + + $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q + sleep 1 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == "$mac")" &> /dev/null + check_fail $? "Found FDB record when should not" + + bridge link set dev $br_port1 learning on + + tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower + tc qdisc del dev $host1_if ingress + + bridge link set dev $br_port1 flood on + + log_test "FDB learning" +}
Add test cases for unknown unicast and unregistered multicast flooding.
For each traffic type, turn off flooding on one bridged port and inject a packet of the specified type through the second bridged port. Make sure the packet was not received by checking the ACL counters on the other end. Later, turn on flooding and make sure the packet was received.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../selftests/net/forwarding/bridge_vlan_aware.sh | 1 + tools/testing/selftests/net/forwarding/lib.sh | 89 ++++++++++++++++++++++ 2 files changed, 90 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh index 1ba119f28963..651998e70557 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh @@ -82,5 +82,6 @@ setup_wait ping_test $h1 192.0.2.2 ping6_test $h1 2001:db8:1::2 learning_test "br0" $swp1 $h1 $h2 +flood_test $swp2 $h1 $h2
exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index f02ab5a581e9..44c9650ceb2a 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -372,3 +372,92 @@ learning_test()
log_test "FDB learning" } + +flood_test_do() +{ + local should_flood=$1 + local host1_if=$4 + local host2_if=$5 + local mac=$2 + local ip=$3 + local err=0 + + # Add an ACL on `host2_if` which will tell us whether the packet + # was flooded to it or not. + tc qdisc add dev $host2_if ingress + tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t ip -q + sleep 1 + + tc -j -s filter show dev $host2_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + if [[ $? -ne 0 && $should_flood == "true" || \ + $? -eq 0 && $should_flood == "false" ]]; then + err=1 + fi + + tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower + tc qdisc del dev $host2_if ingress + + return $err +} + +flood_unicast_test() +{ + local mac=de:ad:be:ef:13:37 + local ip=192.0.2.100 + local host1_if=$2 + local host2_if=$3 + local br_port=$1 + + RET=0 + + bridge link set dev $br_port flood off + + flood_test_do false $mac $ip $host1_if $host2_if + check_err $? "Packet flooded when should not" + + bridge link set dev $br_port flood on + + flood_test_do true $mac $ip $host1_if $host2_if + check_err $? "Packet was not flooded when should" + + log_test "Unknown unicast flood" +} + +flood_multicast_test() +{ + local mac=01:00:5e:00:00:01 + local ip=239.0.0.1 + local host1_if=$2 + local host2_if=$3 + local br_port=$1 + + RET=0 + + bridge link set dev $br_port mcast_flood off + + flood_test_do false $mac $ip $host1_if $host2_if + check_err $? "Packet flooded when should not" + + bridge link set dev $br_port mcast_flood on + + flood_test_do true $mac $ip $host1_if $host2_if + check_err $? "Packet was not flooded when should" + + log_test "Unregistered multicast flood" +} + +flood_test() +{ + # `br_port` is connected to `host2_if` + local host1_if=$2 + local host2_if=$3 + local br_port=$1 + + flood_unicast_test $br_port $host1_if $host2_if + flood_multicast_test $br_port $host1_if $host2_if +}
Configure two hosts which are directly connected to the same router and test IPv4 and IPv6 ping. Use a large MTU and check that ping is unaffected.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 15 +++ tools/testing/selftests/net/forwarding/router.sh | 125 +++++++++++++++++++++++ 2 files changed, 140 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/router.sh
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 44c9650ceb2a..85611868a80a 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -267,6 +267,21 @@ bridge_ageing_time_get() echo $((ageing_time / 100)) }
+forwarding_enable() +{ + ipv4_fwd=$(sysctl -n net.ipv4.conf.all.forwarding) + ipv6_fwd=$(sysctl -n net.ipv6.conf.all.forwarding) + + sysctl -q -w net.ipv4.conf.all.forwarding=1 + sysctl -q -w net.ipv6.conf.all.forwarding=1 +} + +forwarding_restore() +{ + sysctl -q -w net.ipv6.conf.all.forwarding=$ipv6_fwd + sysctl -q -w net.ipv4.conf.all.forwarding=$ipv4_fwd +} + ############################################################################## # Tests
diff --git a/tools/testing/selftests/net/forwarding/router.sh b/tools/testing/selftests/net/forwarding/router.sh new file mode 100755 index 000000000000..cc6a14abfa87 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/router.sh @@ -0,0 +1,125 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=4 +source lib.sh + +h1_create() +{ + vrf_create "vrf-h1" + ip link set dev $h1 master vrf-h1 + + ip link set dev vrf-h1 up + ip link set dev $h1 up + + ip address add 192.0.2.2/24 dev $h1 + ip address add 2001:db8:1::2/64 dev $h1 + + ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1 + ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1 +} + +h1_destroy() +{ + ip route del 2001:db8:2::/64 vrf vrf-h1 + ip route del 198.51.100.0/24 vrf vrf-h1 + + ip address del 2001:db8:1::2/64 dev $h1 + ip address del 192.0.2.2/24 dev $h1 + + ip link set dev $h1 down + vrf_destroy "vrf-h1" +} + +h2_create() +{ + vrf_create "vrf-h2" + ip link set dev $h2 master vrf-h2 + + ip link set dev vrf-h2 up + ip link set dev $h2 up + + ip address add 198.51.100.2/24 dev $h2 + ip address add 2001:db8:2::2/64 dev $h2 + + ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1 + ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1 +} + +h2_destroy() +{ + ip route del 2001:db8:1::/64 vrf vrf-h2 + ip route del 192.0.2.0/24 vrf vrf-h2 + + ip address del 2001:db8:2::2/64 dev $h2 + ip address del 198.51.100.2/24 dev $h2 + + ip link set dev $h2 down + vrf_destroy "vrf-h2" +} + +router_create() +{ + ip link set dev $rp1 up + ip link set dev $rp2 up + + ip address add 192.0.2.1/24 dev $rp1 + ip address add 2001:db8:1::1/64 dev $rp1 + + ip address add 198.51.100.1/24 dev $rp2 + ip address add 2001:db8:2::1/64 dev $rp2 +} + +router_destroy() +{ + ip address del 2001:db8:2::1/64 dev $rp2 + ip address del 198.51.100.1/24 dev $rp2 + + ip address del 2001:db8:1::1/64 dev $rp1 + ip address del 192.0.2.1/24 dev $rp1 + + ip link set dev $rp2 down + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + vrf_prepare + + h1_create + h2_create + + router_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +ping_test $h1 198.51.100.2 +ping6_test $h1 2001:db8:2::2 + +exit $EXIT_STATUS
Create a topology with two hosts, each directly connected to a different router. Both routers are connected using two links, enabling multipath routing.
Test IPv4 and IPv6 ping using default MTU and large MTU.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../selftests/net/forwarding/router_multipath.sh | 209 +++++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/router_multipath.sh
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh new file mode 100755 index 000000000000..86d189b42e9b --- /dev/null +++ b/tools/testing/selftests/net/forwarding/router_multipath.sh @@ -0,0 +1,209 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=8 +source lib.sh + +h1_create() +{ + vrf_create "vrf-h1" + ip link set dev $h1 master vrf-h1 + + ip link set dev vrf-h1 up + ip link set dev $h1 up + + ip address add 192.0.2.2/24 dev $h1 + ip address add 2001:db8:1::2/64 dev $h1 + + ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1 + ip route add 2001:db8:2::/64 vrf vrf-h1 nexthop via 2001:db8:1::1 +} + +h1_destroy() +{ + ip route del 2001:db8:2::/64 vrf vrf-h1 + ip route del 198.51.100.0/24 vrf vrf-h1 + + ip address del 2001:db8:1::2/64 dev $h1 + ip address del 192.0.2.2/24 dev $h1 + + ip link set dev $h1 down + vrf_destroy "vrf-h1" +} + +h2_create() +{ + vrf_create "vrf-h2" + ip link set dev $h2 master vrf-h2 + + ip link set dev vrf-h2 up + ip link set dev $h2 up + + ip address add 198.51.100.2/24 dev $h2 + ip address add 2001:db8:2::2/64 dev $h2 + + ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1 + ip route add 2001:db8:1::/64 vrf vrf-h2 nexthop via 2001:db8:2::1 +} + +h2_destroy() +{ + ip route del 2001:db8:1::/64 vrf vrf-h2 + ip route del 192.0.2.0/24 vrf vrf-h2 + + ip address del 2001:db8:2::2/64 dev $h2 + ip address del 198.51.100.2/24 dev $h2 + + ip link set dev $h2 down + vrf_destroy "vrf-h2" +} + +router1_create() +{ + vrf_create "vrf-r1" + ip link set dev $rp11 master vrf-r1 + ip link set dev $rp12 master vrf-r1 + ip link set dev $rp13 master vrf-r1 + + ip link set dev vrf-r1 up + ip link set dev $rp11 up + ip link set dev $rp12 up + ip link set dev $rp13 up + + ip address add 192.0.2.1/24 dev $rp11 + ip address add 2001:db8:1::1/64 dev $rp11 + + ip address add 169.254.2.12/24 dev $rp12 + ip address add fe80:2::12/64 dev $rp12 + + ip address add 169.254.3.13/24 dev $rp13 + ip address add fe80:3::13/64 dev $rp13 + + ip route add 198.51.100.0/24 vrf vrf-r1 \ + nexthop via 169.254.2.22 dev $rp12 \ + nexthop via 169.254.3.23 dev $rp13 + ip route add 2001:db8:2::/64 vrf vrf-r1 \ + nexthop via fe80:2::22 dev $rp12 \ + nexthop via fe80:3::23 dev $rp13 +} + +router1_destroy() +{ + ip route del 2001:db8:2::/64 vrf vrf-r1 + ip route del 198.51.100.0/24 vrf vrf-r1 + + ip address del fe80:3::13/64 dev $rp13 + ip address del 169.254.3.13/24 dev $rp13 + + ip address del fe80:2::12/64 dev $rp12 + ip address del 169.254.2.12/24 dev $rp12 + + ip address del 2001:db8:1::1/64 dev $rp11 + ip address del 192.0.2.1/24 dev $rp11 + + ip link set dev $rp13 down + ip link set dev $rp12 down + ip link set dev $rp11 down + + vrf_destroy "vrf-r1" +} + +router2_create() +{ + vrf_create "vrf-r2" + ip link set dev $rp21 master vrf-r2 + ip link set dev $rp22 master vrf-r2 + ip link set dev $rp23 master vrf-r2 + + ip link set dev vrf-r2 up + ip link set dev $rp21 up + ip link set dev $rp22 up + ip link set dev $rp23 up + + ip address add 198.51.100.1/24 dev $rp21 + ip address add 2001:db8:2::1/64 dev $rp21 + + ip address add 169.254.2.22/24 dev $rp22 + ip address add fe80:2::22/64 dev $rp22 + + ip address add 169.254.3.23/24 dev $rp23 + ip address add fe80:3::23/64 dev $rp23 + + ip route add 192.0.2.0/24 vrf vrf-r2 \ + nexthop via 169.254.2.12 dev $rp22 \ + nexthop via 169.254.3.13 dev $rp23 + ip route add 2001:db8:1::/64 vrf vrf-r2 \ + nexthop via fe80:2::12 dev $rp22 \ + nexthop via fe80:3::13 dev $rp23 +} + +router2_destroy() +{ + ip route del 2001:db8:1::/64 vrf vrf-r2 + ip route del 192.0.2.0/24 vrf vrf-r2 + + ip address del fe80:3::23/64 dev $rp23 + ip address del 169.254.3.23/24 dev $rp23 + + ip address del fe80:2::22/64 dev $rp22 + ip address del 169.254.2.22/24 dev $rp22 + + ip address del 2001:db8:2::1/64 dev $rp21 + ip address del 198.51.100.1/24 dev $rp21 + + ip link set dev $rp23 down + ip link set dev $rp22 down + ip link set dev $rp21 down + + vrf_destroy "vrf-r2" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp11=${NETIFS[p2]} + + rp12=${NETIFS[p3]} + rp22=${NETIFS[p4]} + + rp13=${NETIFS[p5]} + rp23=${NETIFS[p6]} + + rp21=${NETIFS[p7]} + h2=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +ping_test $h1 198.51.100.2 +ping6_test $h1 2001:db8:2::2 + +exit $EXIT_STATUS
Use different weights for the multipath route configured on the first router and check that the different flows generated by the first host are distributed according to the provided weights.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 14 +++++ .../selftests/net/forwarding/router_multipath.sh | 73 ++++++++++++++++++++++ 2 files changed, 87 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 85611868a80a..b601f6ad9630 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -113,6 +113,13 @@ log_test() return 0 }
+log_info() +{ + local msg=$1 + + echo "INFO: $msg" +} + setup_wait() { for i in $(eval echo {1..$NUM_NETIFS}); do @@ -256,6 +263,13 @@ master_name_get() ip -j link show dev $if_name | jq -r '.[]["master"]' }
+link_stats_tx_packets_get() +{ + local if_name=$1 + + ip -j -s link show dev $if_name | jq '.[]["stats64"]["tx"]["packets"]' +} + bridge_ageing_time_get() { local ageing_time diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh index 86d189b42e9b..bdd1245533eb 100755 --- a/tools/testing/selftests/net/forwarding/router_multipath.sh +++ b/tools/testing/selftests/net/forwarding/router_multipath.sh @@ -158,6 +158,78 @@ router2_destroy() vrf_destroy "vrf-r2" }
+multipath_eval() +{ + local weight_rp12=$1 weight_rp13=$2 packets_rp12=$3 packets_rp13=$4 + local weights_ratio packets_ratio diff + + RET=0 + + if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then + weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \ + | bc -l) + packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \ + | bc -l) + else + weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \ + bc -l) + packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \ + bc -l) + fi + + diff=$(echo $weights_ratio - $packets_ratio | bc -l) + diff=${diff#-} + + test "$(echo "$diff / $weights_ratio > 0.1" | bc -l)" -eq 0 + check_err $? "Too large discrepancy between expected and measured ratios" + log_test "Multipath" + log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio" +} + +multipath4_test() +{ + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 + local weight_rp12=$1 weight_rp13=$2 + local packets_rp12 packets_rp13 + local hash_policy + + # Transmit multiple flows from h1 to h2 and make sure they are + # distributed between both multipath links (rp12 and rp13) + # according to the configured weights. + hash_policy=$(sysctl -n net.ipv4.fib_multipath_hash_policy) + sysctl -q -w net.ipv4.fib_multipath_hash_policy=1 + ip route replace 198.51.100.0/24 vrf vrf-r1 \ + nexthop via 169.254.2.22 dev $rp12 weight $weight_rp12 \ + nexthop via 169.254.3.23 dev $rp13 weight $weight_rp13 + + t0_rp12=$(link_stats_tx_packets_get $rp12) + t0_rp13=$(link_stats_tx_packets_get $rp13) + + ip vrf exec vrf-h1 $MZ -q -p 64 -A 192.0.2.2 -B 198.51.100.2 \ + -d 1msec -t udp "sp=1024,dp=0-32768" + + t1_rp12=$(link_stats_tx_packets_get $rp12) + t1_rp13=$(link_stats_tx_packets_get $rp13) + + let "packets_rp12 = $t1_rp12 - $t0_rp12" + let "packets_rp13 = $t1_rp13 - $t0_rp13" + multipath_eval $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13 + + # Restore settings. + ip route replace 198.51.100.0/24 vrf vrf-r1 \ + nexthop via 169.254.2.22 dev $rp12 \ + nexthop via 169.254.3.23 dev $rp13 + sysctl -q -w net.ipv4.fib_multipath_hash_policy=$hash_policy +} + +multipath_test() +{ + log_info "Running IPv4 multipath tests" + multipath4_test 1 1 + multipath4_test 2 1 + multipath4_test 11 45 +} + setup_prepare() { h1=${NETIFS[p1]} @@ -205,5 +277,6 @@ setup_wait
ping_test $h1 198.51.100.2 ping6_test $h1 2001:db8:2::2 +multipath_test
exit $EXIT_STATUS
Have one host generate 16K IPv6 echo requests with a random flow label and check that they are distributed between both multipath links according to the provided weights.
Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../selftests/net/forwarding/router_multipath.sh | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh index bdd1245533eb..0be24b6768ce 100755 --- a/tools/testing/selftests/net/forwarding/router_multipath.sh +++ b/tools/testing/selftests/net/forwarding/router_multipath.sh @@ -222,12 +222,47 @@ multipath4_test() sysctl -q -w net.ipv4.fib_multipath_hash_policy=$hash_policy }
+multipath6_test() +{ + local t0_rp12 t0_rp13 t1_rp12 t1_rp13 + local weight_rp12=$1 weight_rp13=$2 + local packets_rp12 packets_rp13 + + ip route replace 2001:db8:2::/64 vrf vrf-r1 \ + nexthop via fe80:2::22 dev $rp12 weight $weight_rp12 \ + nexthop via fe80:3::23 dev $rp13 weight $weight_rp13 + + t0_rp12=$(link_stats_tx_packets_get $rp12) + t0_rp13=$(link_stats_tx_packets_get $rp13) + + # Generate 16384 echo requests, each with a random flow label. + for _ in $(seq 1 16384); do + ip vrf exec vrf-h1 ping 2001:db8:2::2 -F 0 -c 1 -q &> /dev/null + done + + t1_rp12=$(link_stats_tx_packets_get $rp12) + t1_rp13=$(link_stats_tx_packets_get $rp13) + + let "packets_rp12 = $t1_rp12 - $t0_rp12" + let "packets_rp13 = $t1_rp13 - $t0_rp13" + multipath_eval $weight_rp12 $weight_rp13 $packets_rp12 $packets_rp13 + + ip route replace 2001:db8:2::/64 vrf vrf-r1 \ + nexthop via fe80:2::22 dev $rp12 \ + nexthop via fe80:3::23 dev $rp13 +} + multipath_test() { log_info "Running IPv4 multipath tests" multipath4_test 1 1 multipath4_test 2 1 multipath4_test 11 45 + + log_info "Running IPv6 multipath tests" + multipath6_test 1 1 + multipath6_test 2 1 + multipath6_test 11 45 }
setup_prepare()
From: Jiri Pirko jiri@mellanox.com
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index b601f6ad9630..141dd33bf6c4 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -296,6 +296,19 @@ forwarding_restore() sysctl -q -w net.ipv4.conf.all.forwarding=$ipv4_fwd }
+tc_offload_check() +{ + for i in $(eval echo {1..$NUM_NETIFS}); do + ethtool -k ${NETIFS[p$i]} \ + | grep "hw-tc-offload: on" &> /dev/null + if [[ $? -ne 0 ]]; then + return 1 + fi + done + + return 0 +} + ############################################################################## # Tests
From: Jiri Pirko jiri@mellanox.com
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 141dd33bf6c4..9129a30df3b9 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -270,6 +270,13 @@ link_stats_tx_packets_get() ip -j -s link show dev $if_name | jq '.[]["stats64"]["tx"]["packets"]' }
+mac_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["address"]' +} + bridge_ageing_time_get() { local ageing_time
From: Jiri Pirko jiri@mellanox.com
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 9129a30df3b9..d666b743047d 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -45,6 +45,21 @@ if [[ ! -v NUM_NETIFS ]]; then exit 0 fi
+############################################################################## +# Command line options handling + +count=0 + +while [[ $# -gt 0 ]]; do + if [[ "$count" -eq "0" ]]; then + unset NETIFS + declare -A NETIFS + fi + count=$((count + 1)) + NETIFS[p$count]="$1" + shift +done + ############################################################################## # Network interfaces configuration
From: Jiri Pirko jiri@mellanox.com
Add first part of flower tests. This patch only contains dst/src ip/mac matching.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../testing/selftests/net/forwarding/tc_common.sh | 23 +++ .../testing/selftests/net/forwarding/tc_flower.sh | 196 +++++++++++++++++++++ 2 files changed, 219 insertions(+) create mode 100644 tools/testing/selftests/net/forwarding/tc_common.sh create mode 100755 tools/testing/selftests/net/forwarding/tc_flower.sh
diff --git a/tools/testing/selftests/net/forwarding/tc_common.sh b/tools/testing/selftests/net/forwarding/tc_common.sh new file mode 100644 index 000000000000..df3e532da30e --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_common.sh @@ -0,0 +1,23 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +tc_check_packets() +{ + local handle=$2 + local count=$3 + local id=$1 + local ret + + output="$(tc -j -s filter show $id)" + # workaround the jq bug which causes jq to return 0 in case input is "" + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + echo $output | \ + jq -e ".[] \ + | select(.options.handle == $handle) \ + | select(.options.actions[0].stats.packets == $count)" \ + &> /dev/null + return $? +} diff --git a/tools/testing/selftests/net/forwarding/tc_flower.sh b/tools/testing/selftests/net/forwarding/tc_flower.sh new file mode 100755 index 000000000000..026a4ea4b2fb --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_flower.sh @@ -0,0 +1,196 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=2 +source lib.sh +source tc_common.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 198.51.100.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 198.51.100.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24 +} + +match_dst_mac_test() +{ + local dummy_mac=de:ad:be:ef:aa:aa + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_mac $dummy_mac action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_mac $h2mac action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched on a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "dst_mac match ($tcflags)" +} + +match_src_mac_test() +{ + local dummy_mac=de:ad:be:ef:aa:aa + + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags src_mac $dummy_mac action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags src_mac $h1mac action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched on a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + log_test "src_mac match ($tcflags)" +} + +match_dst_ip_test() +{ + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 198.51.100.2 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched on a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match on correct filter with mask" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "dst_ip match ($tcflags)" +} + +match_src_ip_test() +{ + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags src_ip 198.51.100.1 action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags src_ip 192.0.2.1 action drop + tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \ + $tcflags src_ip 192.0.2.0/24 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched on a wrong filter" + + tc_check_packets "dev $h2 ingress" 102 1 + check_err $? "Did not match on correct filter" + + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 103 1 + check_err $? "Did not match on correct filter with mask" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower + + log_test "src_ip match ($tcflags)" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +match_dst_mac_test +match_src_mac_test +match_dst_ip_test +match_src_ip_test + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_info "Could not test offloaded functionality" +else + tcflags="skip_sw" + match_dst_mac_test + match_src_mac_test + match_dst_ip_test + match_src_ip_test +fi + +exit $EXIT_STATUS
From: Jiri Pirko jiri@mellanox.com
Add first part of actions tests. This patch only contains tests of gact ok/drop/trap and mirred redirect egress.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../testing/selftests/net/forwarding/tc_actions.sh | 195 +++++++++++++++++++++ 1 file changed, 195 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/tc_actions.sh
diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh new file mode 100755 index 000000000000..84234317a25d --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_actions.sh @@ -0,0 +1,195 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=4 +source lib.sh +source tc_common.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/24 + tc qdisc add dev $swp1 clsact + + simple_if_init $swp2 192.0.2.1/24 +} + +switch_destroy() +{ + simple_if_fini $swp2 192.0.2.1/24 + + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 192.0.2.2/24 +} + +mirred_egress_redirect_test() +{ + RET=0 + + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_fail $? "Matched without redirect rule inserted" + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action mirred egress redirect \ + dev $swp2 + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match incoming redirected packet" + + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + + log_test "mirred egress redirect ($tcflags)" +} + +gact_drop_and_ok_test() +{ + RET=0 + + tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \ + skip_hw dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 102 1 + check_err $? "Packet was not dropped" + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action ok + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 101 1 + check_err $? "Did not see trapped packet" + + tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + log_test "gact drop and ok ($tcflags)" +} + +gact_trap_test() +{ + RET=0 + + tc filter add dev $swp1 ingress protocol ip pref 1 handle 101 flower \ + skip_hw dst_ip 192.0.2.2 action drop + tc filter add dev $swp1 ingress protocol ip pref 3 handle 103 flower \ + $tcflags dst_ip 192.0.2.2 action mirred egress redirect \ + dev $swp2 + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 101 1 + check_fail $? "Saw packet without trap rule inserted" + + tc filter add dev $swp1 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_ip 192.0.2.2 action trap + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $swp1 ingress" 102 1 + check_err $? "Packet was not trapped" + + tc_check_packets "dev $swp1 ingress" 101 1 + check_err $? "Did not see trapped packet" + + tc filter del dev $swp1 ingress protocol ip pref 3 handle 103 flower + tc filter del dev $swp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $swp1 ingress protocol ip pref 1 handle 101 flower + + log_test "trap ($tcflags)" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + swp1origmac=$(mac_get $swp1) + swp2origmac=$(mac_get $swp2) + ip link set $swp1 address $h2mac + ip link set $swp2 address $h1mac + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup + + ip link set $swp2 address $swp2origmac + ip link set $swp1 address $swp1origmac +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +gact_drop_and_ok_test +mirred_egress_redirect_test + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_info "Could not test offloaded functionality" +else + tcflags="skip_sw" + gact_drop_and_ok_test + mirred_egress_redirect_test + gact_trap_test +fi + +exit $EXIT_STATUS
From: Jiri Pirko jiri@mellanox.com
Tests chains matching and goto chain action.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- .../testing/selftests/net/forwarding/tc_chains.sh | 122 +++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/tc_chains.sh
diff --git a/tools/testing/selftests/net/forwarding/tc_chains.sh b/tools/testing/selftests/net/forwarding/tc_chains.sh new file mode 100755 index 000000000000..94c114ad8b44 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_chains.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=2 +source lib.sh +source tc_common.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 + tc qdisc add dev $h2 clsact +} + +h2_destroy() +{ + tc qdisc del dev $h2 clsact + simple_if_fini $h2 192.0.2.2/24 +} + +unreachable_chain_test() +{ + RET=0 + + tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \ + flower $tcflags dst_mac $h2mac action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 1101 1 + check_fail $? "matched on filter in unreachable chain" + + tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \ + flower + + log_test "unreachable chain ($tcflags)" +} + +gact_goto_chain_test() +{ + RET=0 + + tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \ + flower $tcflags dst_mac $h2mac action drop + tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \ + $tcflags dst_mac $h2mac action drop + tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ + $tcflags dst_mac $h2mac action goto chain 1 + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "dev $h2 ingress" 102 1 + check_fail $? "Matched on a wrong filter" + + tc_check_packets "dev $h2 ingress" 101 1 + check_err $? "Did not match on correct filter with goto chain action" + + tc_check_packets "dev $h2 ingress" 1101 1 + check_err $? "Did not match on correct filter in chain 1" + + tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower + tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \ + flower + + log_test "gact goto chain ($tcflags)" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + + vrf_cleanup +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +unreachable_chain_test +gact_goto_chain_test + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_info "Could not test offloaded functionality" +else + tcflags="skip_sw" + unreachable_chain_test + gact_goto_chain_test +fi + +exit $EXIT_STATUS
From: Jiri Pirko jiri@mellanox.com
Test shared block infrastructure. This is a basic test that shares TC block in between 2 clsact qdiscs.
Signed-off-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com --- tools/testing/selftests/net/forwarding/lib.sh | 6 + .../selftests/net/forwarding/tc_shblocks.sh | 122 +++++++++++++++++++++ 2 files changed, 128 insertions(+) create mode 100755 tools/testing/selftests/net/forwarding/tc_shblocks.sh
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index d666b743047d..2448d2fa7c2f 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -30,6 +30,12 @@ if [[ $? -ne 0 ]]; then exit 0 fi
+tc filter help 2>&1 | grep block &> /dev/null +if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old, missing shared block support" + exit 0 +fi + if [[ ! -x "$(command -v jq)" ]]; then echo "SKIP: jq not installed" exit 0 diff --git a/tools/testing/selftests/net/forwarding/tc_shblocks.sh b/tools/testing/selftests/net/forwarding/tc_shblocks.sh new file mode 100755 index 000000000000..cfc8a2ace388 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_shblocks.sh @@ -0,0 +1,122 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +NUM_NETIFS=4 +source lib.sh +source tc_common.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.1/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.1/24 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/24 + tc qdisc add dev $swp1 ingress_block 22 egress_block 23 clsact + + simple_if_init $swp2 192.0.2.2/24 + tc qdisc add dev $swp2 ingress_block 22 egress_block 23 clsact +} + +switch_destroy() +{ + tc qdisc del dev $swp2 clsact + simple_if_fini $swp2 192.0.2.2/24 + + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 192.0.2.2/24 +} + +shared_block_test() +{ + RET=0 + + tc filter add block 22 protocol ip pref 1 handle 101 flower \ + $tcflags dst_ip 192.0.2.2 action drop + + $MZ $h1 -c 1 -p 64 -a $h1mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "block 22" 101 1 + check_err $? "Did not match first incoming packet on a block" + + $MZ $h2 -c 1 -p 64 -a $h2mac -b $swmac -A 192.0.2.1 -B 192.0.2.2 \ + -t ip -q + + tc_check_packets "block 22" 101 2 + check_err $? "Did not match second incoming packet on a block" + + tc filter del block 22 protocol ip pref 1 handle 101 flower + + log_test "shared block ($tcflags)" +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + swmac=$(mac_get $swp1) + swp2origmac=$(mac_get $swp2) + ip link set $swp2 address $swmac + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup + + ip link set $swp2 address $swp2origmac +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +shared_block_test + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_info "Could not test offloaded functionality" +else + tcflags="skip_sw" + shared_block_test +fi + +exit $EXIT_STATUS
On Mon, Feb 26, 2018 at 10:59:34AM +0200, Ido Schimmel wrote:
One of the nice things about network namespaces is that they allow one to easily create and test complex environments.
Unfortunately, these namespaces can not be used with actual switching ASICs, as their ports can not be migrated to other network namespaces (NETIF_F_NETNS_LOCAL) and most of them probably do not support the L1-separation provided by namespaces.
However, a similar kind of flexibility can be achieved by using VRFs and by looping the switch ports together. For example:
br0 + vrf-h1 | vrf-h2 + +---+----+ + | | | | 192.0.2.1/24 + + + + 192.0.2.2/24 swp1 swp2 swp3 swp4 + + + + | | | | +--------+ +--------+
Hi Ido
So you decided to stick to a bridge of just two interfaces. You clearly can write tests using this, but it seems very limiting. You cannot test bridging vs flooding. You cannot tests packets don't leak between parallel bridges. It i hard to test igmp snooping, etc.
It seems to me, using 8 ports, not 4, would give you a much more flexible and interesting test setup.
Andrew -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Mon, Feb 26, 2018 at 02:35:24PM CET, andrew@lunn.ch wrote:
On Mon, Feb 26, 2018 at 10:59:34AM +0200, Ido Schimmel wrote:
One of the nice things about network namespaces is that they allow one to easily create and test complex environments.
Unfortunately, these namespaces can not be used with actual switching ASICs, as their ports can not be migrated to other network namespaces (NETIF_F_NETNS_LOCAL) and most of them probably do not support the L1-separation provided by namespaces.
However, a similar kind of flexibility can be achieved by using VRFs and by looping the switch ports together. For example:
br0 + vrf-h1 | vrf-h2 + +---+----+ + | | | | 192.0.2.1/24 + + + + 192.0.2.2/24 swp1 swp2 swp3 swp4 + + + + | | | | +--------+ +--------+Hi Ido
So you decided to stick to a bridge of just two interfaces. You clearly can write tests using this, but it seems very limiting. You cannot test bridging vs flooding. You cannot tests packets don't leak between parallel bridges. It i hard to test igmp snooping, etc.
It seems to me, using 8 ports, not 4, would give you a much more flexible and interesting test setup.
You can add tests that would use how many ports you like. It is up to the individual test how many ports it needs. Top of this patchset is 4.
Andrew
-- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
br0+vrf-h1 | vrf-h2+ +---+----+ +| | | |- 192.0.2.1/24 + + + + 192.0.2.2/24
swp1 swp2 swp3 swp4+ + + +| | | |+--------+ +--------+
+setup_prepare +setup_wait
+ping_test $h1 192.0.2.2 +ping6_test $h1 2001:db8:1::2
How about putting 192.0.2.3/24 on br0, and pinging to/from it. Otherwise you don't test the slow path.
I would also suggest a much simpler first test.
vrf-h1 vrf-h2+ +| |- 192.0.2.1/24 + + 192.0.2.2/24 192.0.3.1/24 + + 192.0.3.2/24
swp1 swp2 swp3 swp4+ + + +| | | |+--------+ +--------+
Ping from 192.0.2.1 to 192.0.2.2 and test there are 0 packets seen on swp3 and swp4. I've seen DSA drivers get this wrong before, forgetting to ensure ports are properly separated by default.
Andrew -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Ido Schimmel idosch@mellanox.com writes:
+learning_test() +{
- local mac=de:ad:be:ef:13:37
- local ageing_time
- local br_port1=$2 # Connected to `host1_if`.
- local host1_if=$3
- local host2_if=$4
- local bridge=$1
I don't think applying RXT in Bash is appropriate. The ordering of the local variables should instead follow the order of function arguments, because that information isn't communicated by the function prototype itself, unlike C.
Thanks, Petr -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Feb 26, 2018 at 06:31:49PM +0200, Petr Machata wrote:
Ido Schimmel idosch@mellanox.com writes:
+learning_test() +{
- local mac=de:ad:be:ef:13:37
- local ageing_time
- local br_port1=$2 # Connected to `host1_if`.
- local host1_if=$3
- local host2_if=$4
- local bridge=$1
I don't think applying RXT in Bash is appropriate. The ordering of the local variables should instead follow the order of function arguments, because that information isn't communicated by the function prototype itself, unlike C.
Makes sense. Will fix. Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Feb 26, 2018 at 02:35:24PM +0100, Andrew Lunn wrote:
On Mon, Feb 26, 2018 at 10:59:34AM +0200, Ido Schimmel wrote:
One of the nice things about network namespaces is that they allow one to easily create and test complex environments.
Unfortunately, these namespaces can not be used with actual switching ASICs, as their ports can not be migrated to other network namespaces (NETIF_F_NETNS_LOCAL) and most of them probably do not support the L1-separation provided by namespaces.
However, a similar kind of flexibility can be achieved by using VRFs and by looping the switch ports together. For example:
br0 + vrf-h1 | vrf-h2 + +---+----+ + | | | | 192.0.2.1/24 + + + + 192.0.2.2/24 swp1 swp2 swp3 swp4 + + + + | | | | +--------+ +--------+Hi Ido
So you decided to stick to a bridge of just two interfaces. You clearly can write tests using this, but it seems very limiting. You cannot test bridging vs flooding. You cannot tests packets don't leak between parallel bridges. It i hard to test igmp snooping, etc.
Thanks for the feedback Andrew. The bridge tests I currently have in the patchset are the simplest I could come up with. I plan to add more tests that will use more complex topologies.
At this stage, I'm mainly interested in feedback regarding the infrastructure itself and will include the tests you suggested (in the other mail as well) in follow-up patches. -- To unsubscribe from this list: send the line "unsubscribe linux-kselftest" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
linux-kselftest-mirror@lists.linaro.org
-
Andrew Lunn -
Ido Schimmel -
Ido Schimmel -
Jiri Pirko -
Petr Machata