CoreSight

coresight@lists.linaro.org

3 participants
2721 discussions

by Mike Leach

Hi Kim, I've split off this issue from the original thread (keeping the original audience). A bit more investigation this morning shows that on my juno-r1 the issue only occurs if you enable the TPIU. (couldn't use the r2 but I don't think the differences are relevant here). See below for test run info. As far as I am aware, the TPIU driver is currently a stub driver - granted it would be better if it failed gracefully and gave a useful error message, but enabling is not useful without external trace capture (and we might expect the external device to enable this - bit of a grey area starting trace by system calls then piping out to external device). Mike ===All 4 sinks - mmap error ============ mleach@linaro-developer:~/perf-tools$ for i in /sys/bus/coresight/devices/*/enable_sink; do echo $i; done /sys/bus/coresight/devices/20010000.etf/enable_sink /sys/bus/coresight/devices/20030000.tpiu/enable_sink /sys/bus/coresight/devices/20070000.etr/enable_sink /sys/bus/coresight/devices/20140000.etf/enable_sink mleach@linaro-developer:~/perf-tools$ for i in /sys/bus/coresight/devices/*/enable_sink; do echo 1 | sudo tee $i; done 1 1 1 1 mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname failed to mmap with 12 (Cannot allocate memory) mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname Linux [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.077 MB perf.data ] ============================= ====== etf @ 2001 only - no error =========== mleach@linaro-developer:~/perf-tools$ echo 1 | sudo tee /sys/bus/coresight/devices/20010000.etf/enable_sink 1 mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname Linux [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.077 MB perf.data ] ============================= ======etr @ 2007 only - no error ============ mleach@linaro-developer:~/perf-tools$ echo 1 | sudo tee /sys/bus/coresight/devices/20070000.etr/enable_sink 1 mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.076 MB perf.data ] ============================= ======etf @ 2014 only - no error ============ mleach@linaro-developer:~/perf-tools$ echo 1 | sudo tee /sys/bus/coresight/devices/20140000.etf/enable_sink 1 mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname Linux [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.077 MB perf.data ] ============================= =====tpiu @ 2003 only - mmap error ================= mleach@linaro-developer:~/perf-tools$ echo 1 | sudo tee /sys/bus/coresight/device/20030000.tpiu/enable_sink 1 mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname failed to mmap with 12 (Cannot allocate memory) mleach@linaro-developer:~/perf-tools$ mleach@linaro-developer:~/perf-tools$ sudo taskset -c 2 ./perf record -e cs_etm/(a)20070000.etr/u --per-thread taskset -c 2 uname Linux [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.076 MB perf.data ] mleach@linaro-developer:~/perf-tools$ ============================= -- Mike Leach Principal Engineer, ARM Ltd. Blackburn Design Centre. UK

9 years, 1 month

ARM CoreSight SoC-600 is coming

by Chunyan Zhang

Hello All, This may not news now, but I just found it this morning :) https://community.arm.com/soc/b/blog/posts/the-future-of-debug-and-trace-ha… I else noticed that STMicroelectronics is among the first licensees of CoreSight SoC-600, congratulations! Cheers, Chunyan

9 years, 1 month

[PATCH] perf tool: cs-etm: fix build error by removing unused cs_etm_global_header_fmts array

by Kim Phillips

Needed to build arm64 perf with at least gcc 6.2, otherwise get: util/cs-etm.c:1466:27: error: ‘cs_etm_global_header_fmts’ defined but not used [-Werror=unused-const-variable=] static const char * const cs_etm_global_header_fmts[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Kim Phillips <kim.phillips(a)arm.com> --- tools/perf/util/cs-etm.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index 70825e7..5ff3c3e 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -1463,12 +1463,6 @@ static int cs_etm__process_auxtrace_event(struct perf_session *session, } -static const char * const cs_etm_global_header_fmts[] = { - [CS_HEADER_VERSION_0] = " Header version %"PRIx64"\n", - [CS_PMU_TYPE_CPUS] = " PMU type/num cpus %"PRIx64"\n", - [CS_ETM_SNAPSHOT] = " Snapshot %"PRIx64"\n", -}; - static const char * const cs_etm_priv_fmts[] = { [CS_ETM_MAGIC] = " Magic number %"PRIx64"\n", [CS_ETM_CPU] = " CPU %"PRIx64"\n", -- 2.10.2

9 years, 1 month

CoreSight components benchmarking/overhead evaluation

by Muhammad Abdul WAHAB

Hello, I have a couple of questions regarding CoreSight components. How can I evaluate the bandwidth of CS components ? How to evaluate energy overhead introduced by activating CS components ? What would be the best metrics to evaluate CS components or similar debug components ? Besides, I tried evaluating CS components overhead and I did not really see any change in execution time overhead. I understand that this is because the PTM is non-intrusive debug component and that it has a copy of cpu instructions and it operates in parallel. Am I right about this ? Thank you very much for your help and time. Best Regards, M.Abdul WAHAB

9 years, 1 month

Debugging via STM

by lamouchi_KARIM

Hi all, I want to use STM to debug a platform based on cortex a7 under linux and windows. I want to decode all the packet generated by this component within ETB buffer ,then desplay them in a readebal file. Could you help please? Best regards, Karim.

9 years, 1 month

Re: CoreSight components benchmarking/overhead evaluation

by Muhammad Abdul WAHAB

Hi Mathieu, Le 15/03/2017 à 18:00, Mathieu Poirier a écrit : > What do you mean by "bandwidth"? Please give us a little more details. I am using PTM component to trace a program on Linux. I recover the trace on FPGA using TPIU. I was wondering what types of program will generate so much trace that the PTM's internal FIFO will overflow and I won't be able to get the trace for my program. To evaluate this, I thought about benchmarking CoreSight with MiBench programs but I did not see any overflow (by having a look at decoded trace and having a look at I-Sync packet). > That won't be easy as it is HW dependent. Energy probes that tap > directly into the CPU cores would be best but again, the probe points > need to be present in HW. That's only one part of the equation - the > debug power domain also has to be measured. I don't have any measurement tools. I was thinking more about a simulator or something that would allow me to do it from Zynq SoC. I think I might be able to get more details on this one from Xilinx as I am using Xilinx Zynq SoC. > Again, you will have to give me a little more details on what you need to do. The idea is to find suitable metrics to evaluate debug components. Depending on the type of trace source and trace sink, there will be differences. My trace source will be PTM and I was thinking about first using ETB as trace sink to evaluate the maximum trace bandwidth. Then, do the same evaluation with TPIU. I was wondering what will be the suitable metrics to evaluate CS components efficiency. Is it enough to benchmark the CS Debug components with MiBench Benchmark and evaluate execution time overhead. > I hope this helps Of course, it helped. Thank you so much for your quick reply. Best Regards, M.Abdul WAHAB

9 years, 1 month

[PATCH 0/2] Support generation of last branch events with perf inject

by Sebastian Pop

The first patch is a minor typo to allow printing the trace info. The second patch enables translation of perf.data files into last branch events that are then processed by the autoFDO tool to extract a coverage file. Sebastian Pop (2): perf tools: fix printing of auxtrace_info perf tools: new inject capabilitity for CoreSight traces tools/perf/Documentation/cs-etm.txt | 38 +++++++++ tools/perf/util/cs-etm.c | 163 ++++++++++++++++++++++++++++++++++-- 2 files changed, 196 insertions(+), 5 deletions(-) create mode 100644 tools/perf/Documentation/cs-etm.txt -- 2.6.3

9 years, 1 month

[PATCH] arm64: dts: juno: update definition for programmable replicator.

by Mike Leach

Juno platforms have a programmable replicator splitting the trace output to TPIU and ETR. Currently this is not being programmed as it is being treated as a none-programmable replicator - which is the default operational mode for these devices. The TPIU in the system is enabled by default, and this combination is causing back-pressure in the trace system resulting in overflows at the source. Replaces the existing definition with one that defines the programmable replicator, using the "qcom,coresight-replicator1x" driver that provides the correct functionality for CoreSight programmable replicators. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 9d799d9..6546e23 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -372,12 +372,14 @@ }; }; - coresight-replicator { - /* - * Non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell". - */ - compatible = "arm,coresight-replicator"; + coresight-replicator@20120000 { + + compatible = "qcom,coresight-replicator1x", "arm,primecell"; + reg = <0 0x20120000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; -- 2.7.4

9 years, 2 months

[PATCH] hwtracing: coresight: Fixes coresight DT parse to get correct output port ID.

by Mike Leach

Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- drivers/hwtracing/coresight/of_coresight.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/of_coresight.c b/drivers/hwtracing/coresight/of_coresight.c index 629e031..09142e9 100644 --- a/drivers/hwtracing/coresight/of_coresight.c +++ b/drivers/hwtracing/coresight/of_coresight.c @@ -149,7 +149,7 @@ struct coresight_platform_data *of_get_coresight_platform_data( continue; /* The local out port number */ - pdata->outports[i] = endpoint.id; + pdata->outports[i] = endpoint.port; /* * Get a handle on the remote port and parent -- 2.7.4

9 years, 2 months

Re: CoreSight post from yan_lin_aung@yahoo.com requires approval

by Mathieu Poirier

On 11 November 2016 at 06:45, Yan Lin Aung <yan_lin_aung(a)yahoo.com> wrote: > Hi Mathieu, > > I have made progress with getting things up. > > I now switched to another platform with quad-core A53 processors because > the Juno r2 environment is a bit difficult for me to work with. > > The following describes the steps taken: > > 1) I have Linux 4.4.23 running on quad-core A53. CoreSight is enabled. > I can see CoreSight components under "/sys/bus/coresight/devices" > > linaro@linaro-alip:~/OpenCSD-perf-opencsd-4.9-rc1/tools/perf$ ls > /sys/bus/coresight/devices/ > 820000.tpiu 821000.funnel 824000.replicator 825000.etf 826000.etr > 841000.funnel 85c000.etm 85d000.etm 85e000.etm 85f000.etm > > > I can enable/disable ETM and ETR (e.g. echo 1 > 85c000.etm/enable_source, > cat 85c000.etm/enable_source). Ok, but that is not required since identification of the sink to use is now done from the perf cmd line. > > 2) I am able to build OpenCSD library. Then, share libraries > (libcstraced_c_api.so, libcstraced.so) are copied to "/usr/lib". > Then, I tried testing the library by running "c_api_pkt_print_test". Below > shows the sample outputs. > > C-API packet print test > Library Version 0.4.2 > > Idx:86; I_NOT_SYNC : I Stream not synchronised > Idx:1650; I_ASYNC : Alignment Synchronisation. > Idx:1662; I_TRACE_INFO : Trace Info. > Idx:1666; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; > Addr=0xFFFFFFC000096A00; > Idx:1675; I_TRACE_ON : Trace On. > Idx:1676; I_ADDR_CTXT_L_64IS0 : Address & Context, Long, 64 bit, IS0.; > Addr=0xFFFFFFC000096A00; Ctxt: AArch64,EL1, NS; CID=0x00000000; VMID=0x0000; > Idx:1692; I_ATOM_F1 : Atom format 1.; E > Idx:1693; I_ADDR_L_64IS0 : Address, Long, 64 bit, IS0.; > Addr=0xFFFFFFC000594AC0; > Idx:1703; I_ATOM_F1 : Atom format 1.; E > Idx:1704; I_ADDR_S_IS0 : Address, Short, IS0.; Addr=0xFFFFFFC000592B58 > ~[0x12B58] > Idx:1707; I_ATOM_F3 : Atom format 3.; ENN > Idx:1708; I_ATOM_F1 : Atom format 1.; E > Idx:1709; I_ADDR_L_32IS0 : Address, Long, 32 bit, IS0.; Addr=0x005AC4C8; > Idx:1715; I_ATOM_F2 : Atom format 2.; EE > Idx:1716; I_ADDR_L_32IS0 : Address, Long, 32 bit, IS0.; Addr=0x000EA588; > Idx:1721; I_ATOM_F3 : Atom format 3.; NNE > Idx:1722; I_ADDR_L_32IS0 : Address, Long, 32 bit, IS0.; Addr=0x00592B60; > > > 3) Then, perf tool under the "OpenCSD-perf-opencsd-4.9-rc1" branch is > compiled on target. > The following is the compilation log. It seems to me there is no issue with > compilation ("CC util/cs-etm-decoder/cs-etm-decoder.o" is compiled > properly). I also exported "CSTRACE_PATH=/home/linaro/OpenCSD-0.4.2/decoder" > before compilation. > > linaro@linaro-alip:~/OpenCSD-perf-opencsd-4.9-rc1$ make -C tools/perf/ > make: Entering directory > '/home/linaro/OpenCSD-perf-opencsd-4.9-rc1/tools/perf' > BUILD: Doing 'make -j4' parallel build > > Auto-detecting system features: > ... dwarf: [ on ] > ... dwarf_getlocations: [ on ] > ... glibc: [ on ] > ... gtk2: [ on ] > ... libaudit: [ on ] > ... libbfd: [ on ] > ... libelf: [ on ] > ... libnuma: [ on ] > ... numa_num_possible_cpus: [ on ] > ... libperl: [ on ] > ... libpython: [ on ] > ... libslang: [ on ] > ... libcrypto: [ on ] > ... libunwind: [ on ] > ... libdw-dwarf-unwind: [ on ] > ... zlib: [ on ] > ... lzma: [ on ] > ... get_cpuid: [ OFF ] > ... bpf: [ on ] > > Makefile.config:349: BPF prologue is not supported by architecture arm64, > missing regs_query_register_offset() > Makefile.config:400: No debug_frame support found in libunwind-aarch64 > Makefile.config:459: No debug_frame support found in libunwind > GEN common-cmds.h > HOSTCC fixdep.o > HOSTCC pmu-events/json.o > HOSTLD fixdep-in.o > LINK fixdep > HOSTCC pmu-events/jsmn.o > HOSTCC pmu-events/jevents.o > CC fd/array.o > CC fs/fs.o > HOSTLD pmu-events/jevents-in.o > CC event-parse.o > LD fd/libapi-in.o > CC cpu.o > CC debug.o > CC str_error_r.o > CC fs/tracing_path.o > CC exec-cmd.o > PERF_VERSION = 4.9.0-rc1 > Warning: tools/include/uapi/linux/bpf.h differs from kernel > CC libbpf.o > LD fs/libapi-in.o > LD libapi-in.o > AR libapi.a > CC bpf.o > CC help.o > CC pager.o > LD libbpf-in.o > LINK libbpf.a > LINK pmu-events/jevents > CC event-plugin.o > CC plugin_jbd2.o > CC parse-options.o > LD plugin_jbd2-in.o > CC plugin_hrtimer.o > LD plugin_hrtimer-in.o > CC trace-seq.o > CC plugin_kmem.o > CC run-command.o > LD plugin_kmem-in.o > CC plugin_kvm.o > CC parse-filter.o > CC sigchain.o > LD plugin_kvm-in.o > CC plugin_mac80211.o > LD plugin_mac80211-in.o > CC plugin_sched_switch.o > CC plugin_function.o > CC parse-utils.o > LD plugin_sched_switch-in.o > CC plugin_xen.o > LD plugin_xen-in.o > CC plugin_scsi.o > LD plugin_function-in.o > CC plugin_cfg80211.o > CC kbuffer-parse.o > LD plugin_scsi-in.o > LD plugin_cfg80211-in.o > LINK plugin_jbd2.so > LINK plugin_hrtimer.so > LINK plugin_kmem.so > LINK plugin_kvm.so > LINK plugin_mac80211.so > LD libtraceevent-in.o > LINK libtraceevent.a > LINK plugin_sched_switch.so > GEN perf-archive > LINK plugin_function.so > GEN perf-with-kcore > CC ui/gtk/browser.o > LINK plugin_xen.so > LINK plugin_scsi.so > LINK plugin_cfg80211.so > CC subcmd-config.o > CC ui/gtk/hists.o > LD libsubcmd-in.o > CC util/alias.o > AR libsubcmd.a > Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel > Warning: tools/arch/x86/lib/memset_64.S differs from kernel > Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel > CC util/annotate.o > Warning: tools/include/uapi/asm-generic/mman-common.h differs from kernel > CC builtin-bench.o > CC builtin-annotate.o > CC ui/gtk/setup.o > CC ui/gtk/util.o > CC builtin-config.o > CC builtin-diff.o > CC util/block-range.o > CC ui/gtk/helpline.o > CC arch/common.o > CC util/build-id.o > CC arch/arm64/util/dwarf-regs.o > CC arch/arm64/util/unwind-libunwind.o > CC ui/gtk/progress.o > CC builtin-evlist.o > CC arch/arm64/util/../../arm/util/pmu.o > CC util/config.o > CC arch/arm64/util/../../arm/util/auxtrace.o > CC builtin-help.o > CC ui/gtk/annotate.o > CC arch/arm64/util/../../arm/util/cs-etm.o > CC builtin-sched.o > CC util/ctype.o > LD arch/arm64/util/libperf-in.o > CC arch/arm64/tests/regs_load.o > CC arch/arm64/tests/dwarf-unwind.o > CC util/db-export.o > LD ui/gtk/gtk-in.o > LD arch/arm64/tests/libperf-in.o > LD arch/arm64/libperf-in.o > LD arch/libperf-in.o > CC ui/setup.o > CC util/env.o > CC ui/helpline.o > LD gtk-in.o > GEN pmu-events/pmu-events.c > CC pmu-events/pmu-events.o > LD pmu-events/pmu-events-in.o > CC ui/progress.o > CC util/event.o > CC ui/util.o > GEN libtraceevent-dynamic-list > CC ui/hist.o > CC ui/stdio/hist.o > CC builtin-buildid-list.o > CC builtin-buildid-cache.o > CC builtin-list.o > CC ui/browser.o > CC util/evlist.o > CC builtin-record.o > CC builtin-report.o > CC ui/browsers/annotate.o > CC ui/browsers/hists.o > CC util/evsel.o > CC builtin-stat.o > CC builtin-timechart.o > CC builtin-top.o > CC util/evsel_fprintf.o > CC builtin-script.o > CC util/find_bit.o > CC util/kallsyms.o > CC util/levenshtein.o > CC util/llvm-utils.o > BISON util/parse-events-bison.c > CC builtin-kmem.o > CC ui/browsers/map.o > CC util/perf_regs.o > CC util/path.o > CC ui/browsers/scripts.o > CC util/rbtree.o > CC ui/browsers/header.o > CC util/libstring.o > CC builtin-lock.o > CC util/bitmap.o > LD ui/browsers/libperf-in.o > CC util/hweight.o > CC ui/tui/setup.o > CC util/quote.o > CC util/strbuf.o > CC ui/tui/util.o > CC util/string.o > CC builtin-kvm.o > CC builtin-inject.o > CC ui/tui/helpline.o > CC util/strlist.o > CC ui/tui/progress.o > CC util/strfilter.o > LD ui/tui/libperf-in.o > LD ui/libperf-in.o > GEN python/perf.so > CC scripts/perl/Perf-Trace-Util/Context.o > CC builtin-mem.o > CC util/top.o > LD scripts/perl/Perf-Trace-Util/libperf-in.o > CC scripts/python/Perf-Trace-Util/Context.o > CC builtin-data.o > CC util/usage.o > LD scripts/python/Perf-Trace-Util/libperf-in.o > LD scripts/libperf-in.o > CC builtin-version.o > CC builtin-trace.o > CC util/dso.o > CC builtin-probe.o > CC bench/sched-messaging.o > CC bench/sched-pipe.o > CC util/symbol.o > CC bench/mem-functions.o > CC bench/futex-hash.o > CC bench/futex-wake.o > CC bench/futex-wake-parallel.o > CC bench/futex-requeue.o > CC util/symbol_fprintf.o > CC util/color.o > CC bench/futex-lock-pi.o > CC bench/numa.o > CC util/header.o > CC util/callchain.o > CC util/values.o > LD bench/perf-in.o > CC tests/builtin-test.o > CC tests/parse-events.o > CC perf.o > CC util/debug.o > CC util/machine.o > CC util/map.o > CC util/pstack.o > CC tests/dso-data.o > CC util/session.o > CC tests/attr.o > CC util/syscalltbl.o > CC tests/vmlinux-kallsyms.o > CC util/ordered-events.o > CC tests/openat-syscall.o > CC tests/openat-syscall-all-cpus.o > CC tests/openat-syscall-tp-fields.o > CC tests/mmap-basic.o > CC util/comm.o > CC tests/perf-record.o > CC util/thread.o > CC tests/evsel-roundtrip-name.o > CC tests/evsel-tp-sched.o > CC tests/fdarray.o > CC util/thread_map.o > CC tests/pmu.o > CC tests/hists_common.o > CC util/trace-event-parse.o > CC tests/hists_link.o > CC util/parse-events-bison.o > BISON util/pmu-bison.c > CC util/trace-event-read.o > CC util/trace-event-info.o > CC tests/hists_filter.o > CC util/trace-event-scripting.o > CC util/trace-event.o > CC tests/hists_output.o > CC tests/hists_cumulate.o > CC util/svghelper.o > CC tests/python-use.o > CC tests/bp_signal.o > CC tests/bp_signal_overflow.o > CC tests/task-exit.o > CC tests/sw-clock.o > CC tests/mmap-thread-lookup.o > CC util/sort.o > CC util/hist.o > CC tests/thread-mg-share.o > CC tests/switch-tracking.o > CC util/util.o > CC tests/keep-tracking.o > CC util/xyarray.o > CC tests/code-reading.o > CC tests/sample-parsing.o > CC tests/parse-no-sample-id-all.o > CC tests/kmod-path.o > CC tests/thread-map.o > CC util/cpumap.o > CC util/cgroup.o > CC tests/llvm.o > CC util/target.o > CC tests/bpf.o > CC tests/topology.o > CC util/rblist.o > CC util/intlist.o > CC util/vdso.o > CC util/counts.o > CC tests/cpumap.o > CC tests/stat.o > CC tests/event_update.o > CC tests/event-times.o > CC util/stat.o > CC util/stat-shadow.o > CC tests/backward-ring-buffer.o > CC tests/sdt.o > CC tests/is_printable_array.o > CC tests/bitmap.o > CC tests/dwarf-unwind.o > CC tests/llvm-src-base.o > CC util/record.o > CC tests/llvm-src-kbuild.o > CC tests/llvm-src-prologue.o > CC tests/llvm-src-relocation.o > CC util/srcline.o > CC util/data.o > LD tests/perf-in.o > CC util/tsc.o > CC util/cloexec.o > CC util/call-path.o > CC util/thread-stack.o > CC util/auxtrace.o > CC util/intel-pt-decoder/intel-pt-pkt-decoder.o > LD perf-in.o > GEN util/intel-pt-decoder/inat-tables.c > CC util/intel-pt-decoder/intel-pt-log.o > CC util/intel-pt-decoder/intel-pt-decoder.o > CC util/intel-pt-decoder/intel-pt-insn-decoder.o > CC util/cs-etm-decoder/cs-etm-decoder.o > LD util/cs-etm-decoder/libperf-in.o > CC util/scripting-engines/trace-event-perl.o > CC util/scripting-engines/trace-event-python.o > CC util/intel-pt.o > LD util/intel-pt-decoder/libperf-in.o > CC util/intel-bts.o > CC util/cs-etm.o > LD util/scripting-engines/libperf-in.o > CC util/parse-branch-options.o > CC util/parse-regs-options.o > CC util/term.o > CC util/help-unknown-cmd.o > CC util/mem-events.o > CC util/vsprintf.o > CC util/drv_configs.o > CC util/bpf-loader.o > CC util/symbol-elf.o > CC util/probe-file.o > CC util/probe-event.o > CC util/probe-finder.o > CC util/dwarf-aux.o > CC util/dwarf-regs.o > CC util/unwind-libunwind-local.o > CC util/unwind-libunwind.o > CC util/libunwind/arm64.o > CC util/zlib.o > CC util/lzma.o > CC util/demangle-java.o > CC util/demangle-rust.o > CC util/jitdump.o > CC util/genelf.o > CC util/genelf_debug.o > FLEX util/parse-events-flex.c > FLEX util/pmu-flex.c > CC util/parse-events.o > CC util/pmu-bison.o > CC util/parse-events-flex.o > CC util/pmu.o > CC util/pmu-flex.o > LD util/libperf-in.o > LD libperf-in.o > AR libperf.a > LINK perf > LINK libperf-gtk.so > make: Leaving directory > '/home/linaro/OpenCSD-perf-opencsd-4.9-rc1/tools/perf' > > 4) Then, I test the perf as follows: > > linaro@linaro-alip:~/OpenCSD-perf-opencsd-4.9-rc1/tools/perf$ ./perf record > -e cs_etm/(a)826000.etr/ --per-thread uname > invalid or unsupported event: 'cs_etm/(a)826000.etr/' > Run 'perf list' for a list of valid events > > Usage: perf record [<options>] [<command>] > or: perf record [<options>] -- <command> [<options>] > > -e, --event <event> event selector. use 'perf list' to list available > events > > It seems that "perf" is not able to populate the cs_etm events. "perf list" > output shows: > > linaro@linaro-alip:~/OpenCSD-perf-opencsd-4.9-rc1/tools/perf$ ./perf list > > List of pre-defined events (to be used in -e): > > branch-misses [Hardware event] > cache-misses [Hardware event] > cache-references [Hardware event] > cpu-cycles OR cycles [Hardware event] > instructions [Hardware event] > > alignment-faults [Software event] > bpf-output [Software event] > context-switches OR cs [Software event] > cpu-clock [Software event] > cpu-migrations OR migrations [Software event] > dummy [Software event] > emulation-faults [Software event] > major-faults [Software event] > minor-faults [Software event] > page-faults OR faults [Software event] > task-clock [Software event] > > L1-dcache-load-misses [Hardware cache event] > L1-dcache-loads [Hardware cache event] > L1-dcache-store-misses [Hardware cache event] > L1-dcache-stores [Hardware cache event] > branch-load-misses [Hardware cache event] > branch-loads [Hardware cache event] > > rNNN [Raw hardware event > descriptor] > cpu/t1=v1[,t2=v2,t3 ...]/modifier [Raw hardware event > descriptor] > (see 'man perf-list' on how to encode it) > > mem:<addr>[/len][:access] [Hardware breakpoint] > > I think I am very close to getting things up properly. Also, I need to get > this working for a research work here. > > Any idea on why "perf" is not showing the events corresponding to "cs_etm"? > Where possibly is the issue? > Your kind help on this will be very much appreciated. Did you get the kernel from github as per my previous email? Kernel 4.4.23 is very old and doesn't have all of the CoreSight features required to integrate with perf. Also, keep in mind that since you are not working with Juno CPUIdle _needs_ to be disabled and you have to do make sure all power domains and clocks for the CoreSight IP blocks are managed properly. Out of curiosity, what platform is this? Mathieu > > Looking forward to hear from you and thanks. > > > Regards, > Yan Lin Aung > > On Thursday, November 10, 2016 12:23 AM, Mathieu Poirier > <mathieu.poirier(a)linaro.org> wrote: > > > On 9 November 2016 at 08:06, Yan Lin Aung <yan_lin_aung(a)yahoo.com> wrote: >> Hi Mathieu, >> >> Thanks for your reply. Sorry for a bit of delay on my response. >> >> Just a bit of intro on myself. I am a research staff from Nanyang >> Technological University, Singapore. >> >> Basically, I used the build scripts provided with Linaro deliverables for >> Juno and TC2 from ARM >> at this link: https://community.arm.com/docs/DOC-10803 >> >> I am able to get the system running either with prebuilt binaries or >> building from source. >> For Linaro release 16.09 with built from source option, the Linux 4.8.x >> runs >> on Juno r2. >> In the default configuration, coresight was not activated. >> I tried to update the config file to enable coresight drive and >> recompiled. >> However, the coresight devices are not populated somehow. >> >> I would like to have a setup with which I will be able to do some >> experiments as demonstrated in your presentation at the very minimum. >> So, my specific question will be that how shall I proceed to get >> coresight, >> perf with coresight and OpenCSD working properly >> using the Linaro release 16.09. > > You won't have the required pieces in 16.09. To replicate the > examples shown in the presentation you will have to use the kernel > found on github [1]. Since you have a Juno R2 I suggest to use branch > perf-opencsd-4.9-rc1 - that way you won't have to deal with power > domain management. Note that CoreSight is not part of the default V8 > configuration as needs to be explicitly enabled. > > Thanks, > Mathieu > > [1]. https://github.com/Linaro/OpenCSD > > >> >> If you are not using Linaro release 16.09 and have other means of getting >> things up with coresight, perf and OpenCSD on Juno, please kindly share >> with >> me. I am quite keen to follow your steps and try it out at my side here. >> >> Looking forward to hear from you and thanks. >> >> Regards, >> Yan Lin Aung >> >> >> >> >> >> >> >> >> >> On Monday, November 7, 2016 11:32 PM, Mathieu Poirier >> <mathieu.poirier(a)linaro.org> wrote: >> >> >>> ---------- Forwarded message ---------- >>> From: Yan Lin Aung <yan_lin_aung(a)yahoo.com> >>> To: "coresight(a)lists.linaro.org" <coresight(a)lists.linaro.org> >>> Cc: >>> Date: Mon, 7 Nov 2016 03:45:45 +0000 (UTC) >>> Subject: perf with CoreSight and OpenCSD on TC2 and Juno r2 >>> Hi Linaro Coresight Team, >>> >>> I came to know of "Hardware Assisted Tracing on ARM with CoreSight and >>> OpenCSD" by Mathieu Poirier. >>> In his presentation, he mentioned the reference platforms to evaluate >>> perf >>> with CoreSight and OpenCSD are Vexpress TC2 and Juno (Page 7 on his >>> slide). >>> >>> I just checked the "HOWTO.MD" at OpenCSD github site. >>> However, there is very limited info on how to get started with Vexpress >>> TC2 and Juno. >>> >>> I have access to the TC2 and Juno r2 platforms. >>> Please provide a rather detailed version of getting started guide to try >>> out perf with CoreSight and OpenCSD on either TC2 or Juno r2. >> >> Hello Yan Lin, >> >> You are correct, the HOWTO.md on github concentrates on CoreSight and >> doesn't address platform specifics - something like this would be out >> of scope. I'm not exactly sure of what you are looking for in a >> "getting started guide"... Both Juno and TC2 are well supported >> upstream and can be booted with a mainline kernel. The choice of >> bootloader and user space are entirely up to users and don't affect >> the CoreSight suite nor its integration with the perf subsystem. >> >> The fact that you have access to both platform leads me to believe you >> are part of a large organisation. As such there is definitely people >> around you with experience on how to set-up the platforms. >> >> I can try to answer specific questions if you have any. >> >> Thanks, >> Mathieu >> >>> >>> Thanx. >>> >>> Regards, >>> Yan Lin Aung >>> >> >> > >

9 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight