CoreSight

coresight@lists.linaro.org

6 participants
2804 discussions

[PATCH v3 0/2] Add CPU power management for CPU bound CTI devices.

by Mike Leach

Adds in power management for CPU bound CTI devices: i) CPU Hotplug - registers a new notifier for CPU start and stop events. ii) CPU idle PM event notifier to handle PM_ENTER, PM_ENTER_FAILED and PM_EXIT events. Tested with DB410c on coresight/next tree (Linux 5.7-rc1) Changes since v2: 1) removed helper functions filtering on CONFIG_CPU_PM to call cpu_pm fns directly. 2) add check for return value from cpuhp_remove_state_nocalls(). Changes since V1: (requested by Mathieu). 1) Split into separate patches for CPU pm and CPU hotplug handling. 2) Enable on hotplug has a specific function to enable the hardware, while leaving the enable reference counts unchanged. Mike Leach (2): coresight: cti: Add CPU Hotplug handling to CTI driver. coresight: cti: Add CPU idle pm notifer to CTI devices. drivers/hwtracing/coresight/coresight-cti.c | 160 ++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 161 insertions(+) -- 2.17.1

6 years, 2 months

RE: Order Confirmation #PO710526***

by Sales Accountant, LLC

6 years, 2 months

[PATCH] coresight: replicator: Reset replicator if context is lost

by Sai Prakash Ranjan

On some QCOM SoCs, replicators in Always-On domain loses its context as soon as the clock is disabled. Currently as a part of pm_runtime workqueue, clock is disabled after the replicator is initialized by amba_pm_runtime_suspend assuming that context is not lost which is not true for replicators with such limitations. Hence check the replicator idfilter registers in dynamic_replicator_enable() and reset again. Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan(a)codeaurora.org> --- More info here - https://lore.kernel.org/patchwork/patch/1231182/ --- drivers/hwtracing/coresight/coresight-replicator.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c index e7dc1c31d20d..11df63f51071 100644 --- a/drivers/hwtracing/coresight/coresight-replicator.c +++ b/drivers/hwtracing/coresight/coresight-replicator.c @@ -68,6 +68,17 @@ static int dynamic_replicator_enable(struct replicator_drvdata *drvdata, int rc = 0; u32 reg; + /* + * On some QCOM SoCs with replicators in Always-On domain, disabling + * clock will result in replicator losing its context. Currently + * as a part of pm_runtime workqueue, amba_pm_runtime_suspend disables + * clock assuming the context is not lost which is not true for cases + * with hardware limitations as the above. + */ + if ((readl_relaxed(drvdata->base + REPLICATOR_IDFILTER0) == 0) && + (readl_relaxed(drvdata->base + REPLICATOR_IDFILTER1) == 0)) + dynamic_replicator_reset(drvdata); + switch (outport) { case 0: reg = REPLICATOR_IDFILTER0; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

6 years, 2 months

Order Confirmation #PO710526

by Sales Accountant

6 years, 2 months

[PATCH] coresight: etm4x: Fix use-after-free of per-cpu etm drvdata

by Suzuki K Poulose

etm probe could be deferred due to the dependency in the trace path chain and may be retried. We need to clear the per-cpu etmdrvdata entry for the etm in case of a failure to avoid use-after-free cases as reported below: KASAN use-after-free bug in etm4_cpu_pm_notify(): [ 8.574566] coresight etm0: CPU0: ETM v4.2 initialized [ 8.581920] BUG: KASAN: use-after-free in etm4_cpu_pm_notify+0x580/0x2024 [ 8.581925] Read of size 8 at addr ffffff813304f8c8 by task swapper/3/0 [ 8.581927] [ 8.581934] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G S W 5.4.28 #314 [ 8.587775] coresight etm1: CPU1: ETM v4.2 initialized [ 8.594195] Call trace: [ 8.594205] dump_backtrace+0x0/0x188 [ 8.594209] show_stack+0x20/0x2c [ 8.594216] dump_stack+0xdc/0x144 [ 8.594227] print_address_description+0x3c/0x494 [ 8.594232] __kasan_report+0x144/0x168 [ 8.601598] coresight etm2: CPU2: ETM v4.2 initialized [ 8.602563] kasan_report+0x10/0x18 [ 8.602568] check_memory_region+0x1a4/0x1b4 [ 8.602572] __kasan_check_read+0x18/0x24 [ 8.602577] etm4_cpu_pm_notify+0x580/0x2024 [ 8.665945] notifier_call_chain+0x5c/0x90 [ 8.670166] __atomic_notifier_call_chain+0x90/0xf8 [ 8.675182] cpu_pm_notify+0x40/0x6c [ 8.678858] cpu_pm_enter+0x38/0x80 [ 8.682451] psci_enter_idle_state+0x34/0x70 [ 8.686844] cpuidle_enter_state+0xb8/0x20c [ 8.691143] cpuidle_enter+0x38/0x4c [ 8.694820] call_cpuidle+0x3c/0x68 [ 8.698408] do_idle+0x1a0/0x280 [ 8.701729] cpu_startup_entry+0x24/0x28 [ 8.705768] secondary_start_kernel+0x15c/0x170 [ 8.710423] [ 8.711972] Allocated by task 242: [ 8.715473] __kasan_kmalloc+0xf0/0x1ac [ 8.719426] kasan_slab_alloc+0x14/0x1c [ 8.723375] __kmalloc_track_caller+0x23c/0x388 [ 8.728040] devm_kmalloc+0x38/0x94 [ 8.731632] etm4_probe+0x48/0x3c8 [ 8.735140] amba_probe+0xbc/0x158 [ 8.738645] really_probe+0x144/0x408 [ 8.742412] driver_probe_device+0x70/0x140 [ 8.746716] __device_attach_driver+0x9c/0x110 [ 8.751287] bus_for_each_drv+0x90/0xd8 [ 8.755236] __device_attach+0xb4/0x164 [ 8.759188] device_initial_probe+0x20/0x2c [ 8.763490] bus_probe_device+0x34/0x94 [ 8.767436] device_add+0x34c/0x3e0 [ 8.771029] amba_device_try_add+0x68/0x440 [ 8.775332] amba_deferred_retry_func+0x48/0xc8 [ 8.779997] process_one_work+0x344/0x648 [ 8.784127] worker_thread+0x2ac/0x47c [ 8.787987] kthread+0x128/0x138 [ 8.791313] ret_from_fork+0x10/0x18 [ 8.794993] [ 8.796532] Freed by task 242: [ 8.799684] __kasan_slab_free+0x15c/0x22c [ 8.803897] kasan_slab_free+0x10/0x1c [ 8.807761] kfree+0x25c/0x4bc [ 8.810913] release_nodes+0x240/0x2b0 [ 8.814767] devres_release_all+0x3c/0x54 [ 8.818887] really_probe+0x178/0x408 [ 8.822661] driver_probe_device+0x70/0x140 [ 8.826963] __device_attach_driver+0x9c/0x110 [ 8.831539] bus_for_each_drv+0x90/0xd8 [ 8.835487] __device_attach+0xb4/0x164 [ 8.839431] device_initial_probe+0x20/0x2c [ 8.843732] bus_probe_device+0x34/0x94 [ 8.847678] device_add+0x34c/0x3e0 [ 8.851274] amba_device_try_add+0x68/0x440 [ 8.855576] amba_deferred_retry_func+0x48/0xc8 [ 8.860240] process_one_work+0x344/0x648 [ 8.864366] worker_thread+0x2ac/0x47c [ 8.868228] kthread+0x128/0x138 [ 8.871557] ret_from_fork+0x10/0x18 [ 8.875231] [ 8.876782] The buggy address belongs to the object at ffffff813304f800 [ 8.876782] which belongs to the cache kmalloc-1k of size 1024 [ 8.889632] The buggy address is located 200 bytes inside of [ 8.889632] 1024-byte region [ffffff813304f800, ffffff813304fc00) [ 8.901761] The buggy address belongs to the page: [ 8.906695] page:ffffffff04ac1200 refcount:1 mapcount:0 mapping:ffffff8146c03800 index:0x0 compound_mapcount: 0 [ 8.917047] flags: 0x4000000000010200(slab|head) [ 8.921799] raw: 4000000000010200 dead000000000100 dead000000000122 ffffff8146c03800 [ 8.929753] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 8.937703] page dumped because: kasan: bad access detected [ 8.943433] [ 8.944974] Memory state around the buggy address: [ 8.949903] ffffff813304f780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 8.957320] ffffff813304f800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.964742] >ffffff813304f880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.972157] ^ [ 8.977886] ffffff813304f900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.985298] ffffff813304f980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 8.992713] ================================================================== Fixes: f188b5e76aae9 ( "coresight: etm4x: Save/restore state across CPU low power states ") Reported-by: Sai Prakash Ranjan <saiprakash.ranjan(a)codeaurora.org> Tested-by: Sai Prakash Ranjan <saiprakash.ranjan(a)codeaurora.org> Cc: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Mike Leach <mike.leach(a)linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- drivers/hwtracing/coresight/coresight-etm4x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 0b2c7c7efacb..d7e19d91ff17 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -1516,6 +1516,7 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id) return 0; err_arch_supported: + etmdrvdata[drvdata->cpu] = NULL; if (--etm4_count == 0) { etm4_cpu_pm_unregister(); -- 2.24.1

6 years, 2 months

[RFC PATCH v2 0/5] Allow CoreSight to specify and select default sink

by Mike Leach

This patchset provides a proposed infrastructure to allow for the automatic selection of a sink during CoreSight tracing operations. Currently starting tracing using perf requires a sink selection on the command line:- sudo ./perf record -e cs_etm/@tmc_etr0/ --per-thread uname -a After this set the infrastructure will be able to select a default sink:- sudo ./perf record -e cs_etm// --per-thread uname -a This matches with the default operation provided with perf and intelpt. The CoreSight infrastructure is updated with the concept of a sink_select_priority value used when sinks are registered with the system. Where no sink is specified at the start of a trace session, the CoreSight system will walk the connection graph from the source ETM, to find a suitable sink using the first encountered highest priority device. Sinks set a value during component registration, ETR the highest priority, ETB and ETF a lower priority. Thus the first ETR if present will be used, otherwise fallback to the first encountered ETF/ETB. The automatic sink selection will also operate if an ETM is enabled using sysfs commands, and no sink is currently enabled. Applied to Linux 5.7-rc3. Changes since v1: 1) Dropped the device-tree attribute labelling of sinks for selection and implemented the priority schema preferring first encountered ETR, after mailing list discussions. 2) Added in sysfs support for auto sink selection. Mike Leach (5): coresight: Add default sink selection to CoreSight base coresight: tmc: Add default sink selection priorities. coresight: etm: perf: Add default sink selection to etm perf coresight: sysfs: Allow select default sink on source enable. perf: cs-etm: Allow no CoreSight sink to be specified on command line .../hwtracing/coresight/coresight-etm-perf.c | 20 ++++- drivers/hwtracing/coresight/coresight-priv.h | 2 + drivers/hwtracing/coresight/coresight-tmc.c | 5 ++ drivers/hwtracing/coresight/coresight.c | 87 ++++++++++++++++++- include/linux/coresight.h | 10 ++- tools/perf/arch/arm/util/cs-etm.c | 6 +- 6 files changed, 121 insertions(+), 9 deletions(-) -- 2.17.1

6 years, 2 months

[PATCH v2] perf: cs-etm: Update to build with latest opencsd version.

by Mike Leach

OpenCSD version v0.14.0 adds in a new output element. This is represented by a new value in the generic element type enum, which must be added to the handling code in perf cs-etm-decoder to prevent build errors due to build options on the perf project. This element is not currently used by the perf decoder. Perf build feature test updated to require a minimum of 0.14.0 Tested on Linux 5.7-rc3. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> --- tools/build/feature/test-libopencsd.c | 4 ++-- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c index 2b0e02c38870..1547bc2c0950 100644 --- a/tools/build/feature/test-libopencsd.c +++ b/tools/build/feature/test-libopencsd.c @@ -4,9 +4,9 @@ /* * Check OpenCSD library version is sufficient to provide required features */ -#define OCSD_MIN_VER ((0 << 16) | (11 << 8) | (0)) +#define OCSD_MIN_VER ((0 << 16) | (14 << 8) | (0)) #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER) -#error "OpenCSD >= 0.11.0 is required" +#error "OpenCSD >= 0.14.0 is required" #endif int main(void) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index cd92a99eb89d..cd007cc9c283 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -564,6 +564,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( resp = cs_etm_decoder__set_tid(etmq, packet_queue, elem, trace_chan_id); break; + /* Unused packet types */ + case OCSD_GEN_TRC_ELEM_I_RANGE_NOPATH: case OCSD_GEN_TRC_ELEM_ADDR_NACC: case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: -- 2.17.1

6 years, 2 months

Re:😷 COVID-19: PPE Stock in Los Angeles

by Hugo

[DEFAULT_HEADER]Hello, To supply URGENT PPE we are offering FDA APPROVED KN95 and 3Ply Masks. Currently in Los Angeles. Current Stock: KN95 - 1.2 Million (650,000 5Layers and 590,000 4Layers) 3Ply - Level 1 (1 Million) Price: KN95: 1.2 Million - $2.49 (To take all) 3Ply: 1Million - $.49 (To take all) Smaller quantity prices are different Take all price Can be shipped same day. Stock is al FDA approved, in Los Angeles. Alanic International is FDA approved importer FDA number 3016649392. PPAI Number: 519502 Goods can be picked up or shipped from Beverly Hills, California. Call us on 310.596.5555 or 310.800.6438. Enquiry From: http://r.ppequipment.online/mk/cl/f/E1LcdUSwxWa5e-wtvLjdNII3AH3lYy9ljduG2BA… Let me know if you have any questions. Thank you, -- Jennifer Mendez - Director of Marketing The Dioz Group of Companies - Alanic International Office in the UK, USA, Australia. HQ: 8730 Wilshire Blvd, Penthouse Beverly Hills, CA 90211 Website: [ https://www.ppekits.us/ ]( http://r.ppequipment.online/mk/cl/f/m0y_5F3kHR6MPF1Ff1gxTeGgV8lgNDFRDTJYiob… ) [DEFAULT_FOOTER]

6 years, 2 months

[PATCH v2 0/2] Add CPU power management for CPU bound CTI devices.

by Mike Leach

Adds in power management for CPU bound CTI devices: i) CPU Hotplug - registers a new notifier for CPU start and stop events. ii) CPU idle PM event notifier to handle PM_ENTER, PM_ENTER_FAILED and PM_EXIT events. Tested with DB410c on Linux 5.7-rc3. Rebased onto coresight/next Changes since V1: (requested by Mathieu). 1) Split into separate patches for CPU pm and CPU hotplug handling. 2) Enable on hotplug has a specific function to enable the hardware, while leaving the enable reference counts unchanged. Mike Leach (2): coresight: cti: Add CPU Hotplug handling to CTI driver. coresight: cti: Add CPU idle pm notifer to CTI devices. drivers/hwtracing/coresight/coresight-cti.c | 173 ++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 174 insertions(+) -- 2.17.1

6 years, 2 months

[PATCH 86/91] perf: cs-etm: Update to build with latest opencsd version.

by Arnaldo Carvalho de Melo

From: Mike Leach <mike.leach(a)linaro.org> OpenCSD version v0.14.0 adds in a new output element. This is represented by a new value in the generic element type enum, which must be added to the handling code in perf cs-etm-decoder to prevent build errors due to build options on the perf project. This element is not currently used by the perf decoder. Perf build feature test updated to require a minimum of 0.14.0 Tested on Linux 5.7-rc3. Signed-off-by: Mike Leach <mike.leach(a)linaro.org> Reviewed-by: Leo Yan <leo.yan(a)linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier(a)linaro.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Suzuki Poulouse <suzuki.poulose(a)arm.com> Cc: coresight(a)lists.linaro.org Cc: linux-arm-kernel(a)lists.infradead.org Link: http://lore.kernel.org/lkml/20200501143615.1180-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> --- tools/build/feature/test-libopencsd.c | 4 ++-- tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c index 2b0e02c38870..1547bc2c0950 100644 --- a/tools/build/feature/test-libopencsd.c +++ b/tools/build/feature/test-libopencsd.c @@ -4,9 +4,9 @@ /* * Check OpenCSD library version is sufficient to provide required features */ -#define OCSD_MIN_VER ((0 << 16) | (11 << 8) | (0)) +#define OCSD_MIN_VER ((0 << 16) | (14 << 8) | (0)) #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER) -#error "OpenCSD >= 0.11.0 is required" +#error "OpenCSD >= 0.14.0 is required" #endif int main(void) diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c index cd92a99eb89d..cd007cc9c283 100644 --- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c @@ -564,6 +564,8 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer( resp = cs_etm_decoder__set_tid(etmq, packet_queue, elem, trace_chan_id); break; + /* Unused packet types */ + case OCSD_GEN_TRC_ELEM_I_RANGE_NOPATH: case OCSD_GEN_TRC_ELEM_ADDR_NACC: case OCSD_GEN_TRC_ELEM_CYCLE_COUNT: case OCSD_GEN_TRC_ELEM_ADDR_UNKNOWN: -- 2.21.1

6 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

CoreSight