From: Qi Liu liuqi115@huawei.com
Bring in documentation for UltraSoc SMB driver. It simply describes the device, sysfs interface and the firmware bindings.
Signed-off-by: Qi Liu liuqi115@huawei.com Signed-off-by: Junhao He hejunhao3@huawei.com Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com --- .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++ .../trace/coresight/ultrasoc-smb.rst | 83 +++++++++++++++++++ 2 files changed, 114 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb new file mode 100644 index 000000000000..f6526882c627 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb @@ -0,0 +1,31 @@ +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink +Date: December 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (RW) Add/remove a SMB device from a trace path. There can be + multiple sources for a single SMB device. + +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size +Date: December 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the buffer size of each UltraSoc SMB device. + +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status +Date: December 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB status register. + BIT(0) is zero means buffer is empty. + +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos +Date: December 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register. + +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos +Date: December 2022 +KernelVersion: 6.2 +Contact: Junhao He hejunhao3@huawei.com +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register. diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst new file mode 100644 index 000000000000..056dd120e14c --- /dev/null +++ b/Documentation/trace/coresight/ultrasoc-smb.rst @@ -0,0 +1,83 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +UltraSoc - HW Assisted Tracing on SoC +====================================== + :Author: Qi Liu liuqi115@huawei.com + :Date: December 2022 + +Introduction +------------ + +UltraSoc SMB is a per SCCL (Super CPU Cluster) hardware. It provides a +way to buffer and store CPU trace messages in a region of shared system +memory. The device acts as a coresight sink device and the +corresponding trace generators (ETM) are attached as source devices. + +Sysfs files and directories +--------------------------- + +The SMB devices appear on the existing coresight bus alongside other +devices:: + + $# ls /sys/bus/coresight/devices/ + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3 + +The ``ultra_smb<N>`` names SMB device associated with SCCL.:: + + $# ls /sys/bus/coresight/devices/ultra_smb0 + enable_sink mgmt + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt + buf_size buf_status read_pos write_pos + +Key file items are: + + * ``read_pos``: Shows the value on the read pointer register. + * ``write_pos``: Shows the value on the write pointer register. + * ``buf_status``: Shows the value on the status register. + BIT(0) is zero value which means the buffer is empty. + * ``buf_size``: Shows the buffer size of each device. + +Firmware Bindings +----------------- + +The device is only supported with ACPI. Its binding describes device +identifier, resource information and graph structure. + +The device is identified as ACPI HID "HISI03A1". Device resources are allocated +using the _CRS method. Each device must present two base address; the first one +is the configuration base address of the device, the second one is the 32-bit +base address of shared system memory. + +Example:: + + Device(USMB) { \ + Name(_HID, "HISI03A1") \ + Name(_CRS, ResourceTemplate() { \ + QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, NonCacheable, \ + ReadWrite, 0x0, 0x95100000, 0x951FFFFF, 0x0, 0x100000) \ + QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, Cacheable, \ + ReadWrite, 0x0, 0x50000000, 0x53FFFFFF, 0x0, 0x4000000) \ + }) \ + Name(_DSD, Package() { \ + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \ + /* Use CoreSight Graph ACPI bindings to describe connections topology */ + Package() { \ + 0, \ + 1, \ + Package() { \ + 1, \ + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \ + 8, \ + Package() {0x8, 0, _SB.S00.SL11.CL28.F008, 0}, \ + Package() {0x9, 0, _SB.S00.SL11.CL29.F009, 0}, \ + Package() {0xa, 0, _SB.S00.SL11.CL2A.F010, 0}, \ + Package() {0xb, 0, _SB.S00.SL11.CL2B.F011, 0}, \ + Package() {0xc, 0, _SB.S00.SL11.CL2C.F012, 0}, \ + Package() {0xd, 0, _SB.S00.SL11.CL2D.F013, 0}, \ + Package() {0xe, 0, _SB.S00.SL11.CL2E.F014, 0}, \ + Package() {0xf, 0, _SB.S00.SL11.CL2F.F015, 0}, \ + } \ + } \ + }) \ + }