In our hardware design, by combining a funnel and a replicator, it implement a hardware device with one-to-one correspondence between output ports and input ports. The programming usage on this device is the same as funnel. The software uses a funnel and a static replicator to implement the driver of this device. Since original funnels only support a single output connection and original replicator only support a single input connection, the code needs to be modified to support this new feature. The following is a typical topology diagram of multi-port output mechanism. |----------| |---------| |----------| |---------| | TPDM 0 | | Source0 | | Source 1 | | TPDM 1 | |----------| |---------| |----------| |---------| | | | | | | | | | --------- | | | | | | | | | | | | | | | -------------/ ---------------------- | \ Funnel 0 / | | ----------- | ------------------------------ | | | | | | ------------------/ \ Funnel 1 / ----| --------------/ | | |----> Combine a funnel and a | | static replicator /-----------------\ | / replicator 0 \ ----| /---------------------\ | | | | | |-----------| | |---------| | | |TPDM0 |TPDM1 | -----------------/ | \ TPDA 0 / | -------------/ | | | | |Source0/1 | -------------------------------/ \ Funnel 2 / ---------------------------/
Changes in V6: 1. Optimize the prompt content of the warning log when the filter handle is not a trace source. -- Suzuki K Poulose 2. Reset the filter device and fwnode if it is not a trace source. -- Suzuki K Poulose
Changes in V5: 1. Replace "filter-src" with "filter-source" in the dt-binding document. -- Suzuki K Poulose 2. Optimize the comments of the patch "coresight: Add support for trace filtering by source" due to bad example. -- Suzuki K Poulose 3. Correct spelling errors in the patch "coresight: Add support for trace filtering by source". -- Suzuki K Poulose 4. Optimize the function "coresight_blocks_source". -- Suzuki K Poulose 5. Add { } in the function "of_coresight_parse_endpoint". -- Suzuki K Poulose 6. Adjust the order of the patches. -- Suzuki K Poulose 7. Adjust the alignment in "coresight-platform.c". -- Suzuki K Poulose
Changes in V4: 1. Use "coresight_get_source(path)" in the function "coresight_disable_path_from" instead of explicitly passing the source. -- Suzuki K Poulose 2. Optimize the order of the input parameters for "_coresight_build_path". -- Suzuki K Poulose 3. Reuse the method "coresight_block_source" in "_coresight_build_path". -- Suzuki K Poulose 4. Remove the unnecessary () in "coresight_build_path". -- Suzuki K Poulose 5. Add a helper to check if a device is SOURCE. -- Suzuki K Poulose 6. Adjust the posistion of setting "still_orphan" in "coresight_build_path". -- Suzuki K Poulose
Changes in V3: 1. Rename the function "coresight_source_filter" to "coresight_block_source". And refine this function. -- Suzuki K Poulose 2. Rename the parameters of the function "coresight_find_out_connection" to avoid confusion. -- Suzuki K Poulose 3. Get the source of path in "coresight_enable_path" and "coresight_disable_path". -- Suzuki K Poulose 4. Fix filter source device before skip the port in "coresight_orphan_match". -- Suzuki K Poulose 5. Make sure the device still orphan if whter is a filter source firmware node but the filter source device is null. -- Suzuki K Poulose 6. Walk through the entire coresight bus and fixup the "filter_src_dev" if the source is being removed. -- Suzuki K Poulose 7. Refine the commit description of patch#2. -- Suzuki K Poulose 8. Fix the warning reported by kernel test robot. -- kernel test robot. 9. Use the source device directly if the port has a hardcoded filter in "tpda_get_element_size". -- Suzuki K Poulose
Changes in V2: 1. Change the reference for endpoint property in dt-binding. -- Krzysztof Kozlowski 2. Change the property name "filter_src" to "filter-src". -- Krzysztof Kozlowski 3. Fix the errors in running 'make dt_binding_check'. -- Rob Herring 4. Pass in the source parameter instead of path. -- Suzuki K Poulose 5. Reset the "filter_src_dev" if the "src" csdev is being removed. -- Suzuki K Poulose 6. Add a warning if the "filter_src_dev" is of not the type DEV_TYPE_SOURCE. -- Suzuki K Poulose 7. Optimize the procedure for handling all possible cases. -- Suzuki K Poulose
Changes in V1: 1. Add a static replicator connect to a funnel to implement the correspondence between the output ports and the input ports on funnels. -- Suzuki K Poulose 2. Add filter_src_dev and filter_src_dev phandle to "coresight_connection" struct, and populate them if there is one. -- Suzuki K Poulose 3. To look at the phandle and then fixup/remove the filter_src device in fixup/remove connections. -- Suzuki K Poulose 4. When TPDA reads DSB/CMB element size, it is implemented by looking up filter src device in the connections. -- Suzuki K Poulose
Tao Zhang (4): dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering coresight: Add a helper to check if a device is source coresight: Add support for trace filtering by source coresight-tpda: Optimize the function of reading element size
.../arm/arm,coresight-static-replicator.yaml | 19 ++- drivers/hwtracing/coresight/coresight-core.c | 113 +++++++++++++++--- .../hwtracing/coresight/coresight-platform.c | 21 ++++ drivers/hwtracing/coresight/coresight-tpda.c | 13 +- include/linux/coresight.h | 12 +- 5 files changed, 155 insertions(+), 23 deletions(-)