Hi Mathieu,
On 2020/9/10 0:26, Mathieu Poirier wrote:
On Wed, Sep 09, 2020 at 12:30:02PM +0100, Mike Leach wrote:
Hi,
On Wed, 2 Sep 2020 at 11:36, Suzuki K Poulose suzuki.poulose@arm.com wrote:
On 08/27/2020 09:44 PM, Mathieu Poirier wrote:
Hi Liu,
On Wed, Aug 19, 2020 at 04:06:37PM +0800, Qi Liu wrote:
When too much trace information is generated on-chip, the ETM will overflow, and cause data loss. This is a common phenomenon on ETM devices.
But sometimes we do not want to lose performance trace data, so we suppress the speed of instructions sent from CPU core to ETM to avoid the overflow of ETM.
Signed-off-by: Qi Liu liuqi115@huawei.com
Changes since v1:
- ETM on HiSilicon Hip09 platform supports backpressure, so does
not need to modify core commit.
drivers/hwtracing/coresight/coresight-etm4x.c | 43 +++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c index 7797a57..7641f89 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.c +++ b/drivers/hwtracing/coresight/coresight-etm4x.c @@ -43,6 +43,10 @@ MODULE_PARM_DESC(boot_enable, "Enable tracing on boot"); #define PARAM_PM_SAVE_NEVER 1 /* never save any state */ #define PARAM_PM_SAVE_SELF_HOSTED 2 /* save self-hosted state only */
+#define CORE_COMMIT_CLEAR 0x3000 +#define CORE_COMMIT_SHIFT 12 +#define HISI_ETM_AMBA_ID_V1 0x000b6d01
- static int pm_save_enable = PARAM_PM_SAVE_FIRMWARE; module_param(pm_save_enable, int, 0444); MODULE_PARM_DESC(pm_save_enable,
@@ -104,11 +108,40 @@ struct etm4_enable_arg { int rc; };
+static void etm4_cpu_actlr1_cfg(void *info) +{
- struct etm4_enable_arg *arg = (struct etm4_enable_arg *)info;
- u64 val;
- asm volatile("mrs %0,s3_1_c15_c2_5" : "=r"(val));
The ID register (S3_1_C15_c2_5) falls into implementation defined space. See Arm ARM DDI 0487F.a, section "D12.3.2 Reserved encodings for IMPLEMENTATION DEFINED registers".
So, please stop calling this "etm4_cpu_actlr1_cfg". Since,
- actlr1 is not an architected name for the said encoding
- The id register could mean something else on another CPU.
Rather this should indicate platform/CPU specific. e.g,
etm4_cpu_hisilicon_config_core_commit()
- val &= ~CORE_COMMIT_CLEAR;
- val |= arg->rc << CORE_COMMIT_SHIFT;
- asm volatile("msr s3_1_c15_c2_5,%0" : : "r"(val));
+}
+static void etm4_config_core_commit(int cpu, int val) +{
- struct etm4_enable_arg arg = {0};
- arg.rc = val;
- smp_call_function_single(cpu, etm4_cpu_actlr1_cfg, &arg, 1);
Function etm4_enable/disable_hw() are already running on the CPU they are supposed to so no need to call smp_call_function_single().
+}
- static int etm4_enable_hw(struct etmv4_drvdata *drvdata) { int i, rc;
- struct amba_device *adev; struct etmv4_config *config = &drvdata->config; struct device *etm_dev = &drvdata->csdev->dev;
- struct device *dev = drvdata->csdev->dev.parent;
- adev = container_of(dev, struct amba_device, dev);
- /*
* If ETM device is HiSilicon ETM device, reduce the* core-commit to avoid ETM overflow.*/- if (adev->periphid == HISI_ETM_AMBA_ID_V1)
Please could you move this check to the function above ? Ideally, it would be good to have something like :
etm4_config_impdef_features();And :
etm4_config_impdef_features(struct etm4_drvdata *drvdata) { etm4_cpu_hisilicon_config_core_commit(drvdata); }In addition to the above, Is it worth having this implementation defined code gated in the kernel configuration - like we do for core features sometimes? i,.e. CONFIG_ETM4X_IMPDEF_FEATURE (controls overall impdef support in the driver) and CONFIG_ETM4X_IMPDEF_HISILICON (depends on CONFIG_ETM4X_IMPDEF_FEATURE )
This way we keep non ETM architectural code off platforms that cannot use it / test it.
That's a good idea - they do the same for CPU erratas.
Considering that users sometimes use the same set of code on different platforms, how about using both CONFIG andperiphid to keep core-commit code off the platforms that do not need it? i, .e. CONFIG_ETM4X_IMPDEF_FEATURE ( controls overall impdef support in the driver ) periphid ( match impdef code with the target platform )
This way we could keep the same set of code working on different platforms, and it could help to ensure compatibility. I'll update this patch if this solution is ok : )
Thanks! Qi
Do you have any documentation on this back pressure feature? I doubt this is specific to Hip09 platform and as such would prefer to have a more generic approach that works on any platform that supports it.
Anyone on the CS mailing list that knows what this is about?
I believe this is hisilicon specific. May be same across their CPUs, may be a specific one. There is no architectural guarantee.
This could be an implementation of the feature provided by the TRCSTALLCTRL register - which allows PE to be stalled in response to the ETM fifos approaching overflow. At present we do nothing with this feature as we have yet to see a target with it implemented, but if this is the case then it is an ETMv4 architectural feature that could be added into the main driver code, with use/access gated by the relevent TRCIDR bit.
Regards
Mike
Cheers Suzuki
-- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
.