The current method for allocating trace source ID values to sources is to use a fixed algorithm for CPU based sources of (cpu_num * 2 + 0x10). The STM is allocated ID 0x1.
This fixed algorithm is used in both the CoreSight driver code, and by perf when writing the trace metadata in the AUXTRACE_INFO record.
The method needs replacing as currently:- 1. It is inefficient in using available IDs. 2. Does not scale to larger systems with many cores and the algorithm has no limits so will generate invalid trace IDs for cpu number > 44.
Additionally requirements to allocate additional system IDs on some systems have been seen.
This patch set introduces an API that allows the allocation of trace IDs in a dynamic manner.
Architecturally reserved IDs are never allocated, and the system is limited to allocating only valid IDs.
Each of the current trace sources ETM3.x, ETM4.x and STM is updated to use the new API.
perf handling is changed so that the ID associated with the CPU is read from sysfs. The ID allocator is notified when perf events start and stop so CPU based IDs are kept constant throughout any perf session.
For the ETMx.x devices IDs are allocated on certain events a) When using sysfs, an ID will be allocated on hardware enable, and freed when the sysfs reset is written. b) When using perf, ID is allocated on hardware enable, and freed on hardware disable.
For both cases the ID is allocated when sysfs is read to get the current trace ID. This ensures that consistent decode metadata can be extracted from the system where this read occurs before device enable.
Note: This patchset breaks backward compatibility for perf record. Because the method for generating the AUXTRACE_INFO meta data has changed, using an older perf record will result in metadata that does not match the trace IDs used in the recorded trace data. This mismatch will cause subsequent decode to fail. Older versions of perf will still be able to decode data generated by the updated system.
Applies to coresight/next [b54f53bc11a5] Tested on DB410c
Mike Leach (10): coresight: trace-id: Add API to dynamically assign trace ID values coresight: trace-id: Set up source trace ID map for system coresight: stm: Update STM driver to use Trace ID api coresight: etm4x: Use trace ID API to dynamically allocate trace ID coresight: etm3x: Use trace ID API to allocate IDs coresight: perf: traceid: Add perf notifiers for trace ID perf: cs-etm: Update event to read trace ID from sysfs coresight: Remove legacy Trace ID allocation mechanism coresight: etmX.X: stm: Remove unused legacy source trace ID ops coresight: trace-id: Add debug & test macros to trace id allocation
drivers/hwtracing/coresight/Makefile | 2 +- drivers/hwtracing/coresight/coresight-core.c | 64 ++--- .../hwtracing/coresight/coresight-etm-perf.c | 16 +- drivers/hwtracing/coresight/coresight-etm.h | 3 +- .../coresight/coresight-etm3x-core.c | 93 ++++--- .../coresight/coresight-etm3x-sysfs.c | 28 +- .../coresight/coresight-etm4x-core.c | 63 ++++- .../coresight/coresight-etm4x-sysfs.c | 32 ++- drivers/hwtracing/coresight/coresight-etm4x.h | 3 + drivers/hwtracing/coresight/coresight-priv.h | 1 + drivers/hwtracing/coresight/coresight-stm.c | 49 +--- .../hwtracing/coresight/coresight-trace-id.c | 255 ++++++++++++++++++ .../hwtracing/coresight/coresight-trace-id.h | 69 +++++ include/linux/coresight-pmu.h | 12 - include/linux/coresight.h | 3 - tools/perf/arch/arm/util/cs-etm.c | 12 +- 16 files changed, 530 insertions(+), 175 deletions(-) create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.c create mode 100644 drivers/hwtracing/coresight/coresight-trace-id.h