On 05/07/2023 10:56, Pandey, Radhey Shyam wrote:
-----Original Message----- From: Suzuki K Poulose suzuki.poulose@arm.com Sent: Wednesday, July 5, 2023 1:57 PM To: Pandey, Radhey Shyam radhey.shyam.pandey@amd.com; mathieu.poirier@linaro.org; mike.leach@linaro.org; leo.yan@linaro.org; alexander.shishkin@linux.intel.com Cc: coresight@lists.linaro.org; linux-arm-kernel@lists.infradead.org Subject: Re: Linux coresight arm64 : Incorrect data in cstrace.bin
Hi Radhe Shyam
On 05/07/2023 05:38, Pandey, Radhey Shyam wrote:
Hi,
I am using linux 6.1 kernel coresight framework to capture ETM trace. Enabled coresight driver and added coresight component device node in DTS. With that, we could probe all coresight components.
But when we do capture using sysfs and then read the trace.bin using ptm2human we see invalid trace data. Trace content changes on each capture. Any pointers to help narrow down the issue?
Tried: sysfs capture and perf (with OpenCSD enabled)
Development board: VCK190 : https://docs.xilinx.com/r/en-US/ug1366-vck190-eval-bd https://www.xilinx.com/support/documents/architecture-
manuals/am011-ve
rsal-acap-trm.pdf
xilinx-vck190-20231:/home/petalinux# dmesg | grep -i amba [ 0.301054] Serial: AMBA PL011 UART driver [ 0.306226] amba f0c20000.funnel: Fixing up cyclic dependency with
f0d70000.etm
[ 0.313624] amba f0c20000.funnel: Fixing up cyclic dependency with
f0d30000.etm
[ 0.321110] amba f0c30000.etf: Fixing up cyclic dependency with
f0c20000.funnel
[ 1.470247] Serial: AMBA driver xilinx-vck190-20231:/home/petalinux# dmesg | grep -i coresight [ 1.865006] cs_system_cfg: CoreSight Configuration manager initialised [ 1.876858] coresight etm0: CPU0: etm v4.0 initialized [ 1.885666] coresight etm1: CPU1: etm v4.0 initialized [ 1.894435] coresight-cpu-debug f0d00000.debug1: Coresight debug-CPU0
initialized
[ 1.902072] coresight-cpu-debug f0d40000.debug1: Coresight debug-CPU1
initialized
xilinx-vck190-20231:/home/petalinux# ls /sys/bus/coresight/devices/ etm0 etm1 funnel0 tmc_etf0
cd /sys/bus/coresight/devices/ echo 1 > tmc_etf0/enable_sink echo 1 > etm0/enable_source echo 0 > etm0/enable_source echo 0 > tmc_etf0/enable_sink cd /root/ dd if=/dev/tmc_etf0 of=cstrace_28Jun.bin
./ptm2human/ptm2human -e -i cstrace.bin -d
Please note that ptm2human is for PTM trace decoding and ETMv4 uses a different format and thus is not compatible.
I also tried OpenCSD integration with PERF.
Have you made sure the perf is "linked" to the opencsd ?
Earlier I statically linked but after adding CORESIGHT=1.
linux-xlnx$ make ARCH=arm64 NO_LIBELF=1 NO_JVMTI=1 VF=1 CORESIGHT=1 -C tools/perf/ make: Entering directory 'linux-xlnx/tools/perf' BUILD: Doing 'make -j24' parallel build
Makefile.config:520: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop.
echo $CSINCLUDES /scratch/development/coresight/my-opencsd/decoder/include radheys@xhdradheys41:/scratch/development/linux-xlnx$ ls /scratch/development/coresight/my-opencsd/decoder/include common i_dec interfaces mem_acc opencsd opencsd.h pkt_printers
echo $CSLIBS /scratch/development/coresight/my-opencsd/decoder/lib/builddir radheys@xhdradheys41:/scratch/development/linux-xlnx$ ls /scratch/development/coresight/my-opencsd/decoder/lib/builddir libopencsd.a libopencsd_c_api.so libopencsd_c_api.so.1.4.0 libopencsd.so.1 libopencsd_c_api.a libopencsd_c_api.so.1 libopencsd.so libopencsd.so.1.4.0
Anything I am missing to fix this opencsd lib not found?
Have you checked the libopencsd version ? It looks it must be able to pick up the path for lib/headers.
Suzuki