Hi Suzuki,
在 2/22/2023 2:11 AM, Suzuki K Poulose 写道:
On 19/01/2023 07:41, Tao Zhang wrote:
Add property "qcom,dsb-elem-size" to support DSB(Discrete Single Bit) element for TPDA. Specifies the DSB element size supported by each monitor connected to the aggregator on each port. Should be specified in pairs (port, dsb element size).
Signed-off-by: Tao Zhang quic_taozha@quicinc.com Signed-off-by: Tao Zhang taozha@qti.qualcomm.com
.../bindings/arm/qcom,coresight-tpda.yaml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index 2ec9b5b..298db7f 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -58,6 +58,26 @@ properties: minItems: 1 maxItems: 2 + qcom,dsb-element-size: + description: | + Specifies the DSB(Discrete Single Bit) element size supported by + each monitor connected to the aggregator on each port. Should be + specified in pairs <port, dsb element size>.
Isn't this a property of the TPDM connected to the port ? i.e. the DSB size ? Thus shouldn't this be part of the TPDM device (and the TPDA will be able to find it from the TPDM device) ?
Since the port number is about the input port of TPDA, this property needs to be configured in the TPDA-related settings.
In our current design, TPDM doesn't have a register to record the DSB size, and TPDA cannot actively know the TPDM DSB size from the TPDM device.
Suzuki
Best,
Tao