When 'etm->instructions_sample_period' is less than 'tidq->period_instructions', the function cs_etm__sample() cannot handle this case properly with its logic.
Let's see below flow as an example:
- If we set itrace option '--itrace=i4', then function cs_etm__sample() has variables with initialized values:
tidq->period_instructions = 0 etm->instructions_sample_period = 4
- When the first packet is coming:
packet->instr_count = 10; the number of instructions executed in this packet is 10, thus update period_instructions as below:
tidq->period_instructions = 0 + 10 = 10 instrs_over = 10 - 4 = 6 offset = 10 - 6 - 1 = 3 tidq->period_instructions = instrs_over = 6
- When the second packet is coming:
packet->instr_count = 10; in the second pass, assume 10 instructions in the trace sample again:
tidq->period_instructions = 6 + 10 = 16 instrs_over = 16 - 4 = 12 offset = 10 - 12 - 1 = -3 -> the negative value tidq->period_instructions = instrs_over = 12
So after handle these two packets, there have below issues:
The first issue is that cs_etm__instr_addr() returns the address within the current trace sample of the instruction related to offset, so the offset is supposed to be always unsigned value. But in fact, function cs_etm__sample() might calculate a negative offset value (in handling the second packet, the offset is -3) and pass to cs_etm__instr_addr() with u64 type with a big positive integer.
The second issue is it only synthesizes 2 samples for sample period = 4. In theory, every packet has 10 instructions so the two packets have total 20 instructions, 20 instructions should generate 5 samples (4 x 5 = 20). This is because cs_etm__sample() only calls once cs_etm__synth_instruction_sample() to generate instruction sample per range packet.
This patch fixes the logic in function cs_etm__sample(); the basic idea for handling coming packet is:
- To synthesize the first instruction sample, it combines the left instructions from the previous packet and the head of the new packet; then generate continuous samples with sample period; - At the tail of the new packet, if it has the rest instructions, these instructions will be left for the sequential sample.
Suggested-by: Mike Leach mike.leach@linaro.org Signed-off-by: Leo Yan leo.yan@linaro.org --- tools/perf/util/cs-etm.c | 87 ++++++++++++++++++++++++++++++++-------- 1 file changed, 70 insertions(+), 17 deletions(-)
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c index b2f31390126a..4b7d6c36ce3c 100644 --- a/tools/perf/util/cs-etm.c +++ b/tools/perf/util/cs-etm.c @@ -1356,9 +1356,12 @@ static int cs_etm__sample(struct cs_etm_queue *etmq, struct cs_etm_auxtrace *etm = etmq->etm; int ret; u8 trace_chan_id = tidq->trace_chan_id; - u64 instrs_executed = tidq->packet->instr_count; + u64 instrs_prev;
- tidq->period_instructions += instrs_executed; + /* Get instructions remainder from previous packet */ + instrs_prev = tidq->period_instructions; + + tidq->period_instructions += tidq->packet->instr_count;
/* * Record a branch when the last instruction in @@ -1376,26 +1379,76 @@ static int cs_etm__sample(struct cs_etm_queue *etmq, * TODO: allow period to be defined in cycles and clock time */
- /* Get number of instructions executed after the sample point */ - u64 instrs_over = tidq->period_instructions - - etm->instructions_sample_period; + /* + * Below diagram demonstrates the instruction samples + * generation flows: + * + * Instrs Instrs Instrs Instrs + * Sample(n) Sample(n+1) Sample(n+2) Sample(n+3) + * | | | | + * V V V V + * -------------------------------------------------- + * ^ ^ + * | | + * Period Period + * instructions(Pi) instructions(Pi') + * + * | | + * ---------------- -----------------/ + * V + * tidq->packet->instr_count + * + * Instrs Sample(n...) are the synthesised samples occurring + * every etm->instructions_sample_period instructions - as + * defined on the perf command line. Sample(n) is being the + * last sample before the current etm packet, n+1 to n+3 + * samples are generated from the current etm packet. + * + * tidq->packet->instr_count represents the number of + * instructions in the current etm packet. + * + * Period instructions (Pi) contains the the number of + * instructions executed after the sample point(n) from the + * previous etm packet. This will always be less than + * etm->instructions_sample_period. + * + * When generate new samples, it combines with two parts + * instructions, one is the tail of the old packet and another + * is the head of the new coming packet, to generate + * sample(n+1); sample(n+2) and sample(n+3) consume the + * instructions with sample period. After sample(n+3), the rest + * instructions will be used by later packet and it is assigned + * to tidq->period_instructions for next round calculation. + */
/* - * Calculate the address of the sampled instruction (-1 as - * sample is reported as though instruction has just been - * executed, but PC has not advanced to next instruction) + * Get the initial offset into the current packet instructions; + * entry conditions ensure that instrs_prev is less than + * etm->instructions_sample_period. */ - u64 offset = (instrs_executed - instrs_over - 1); - u64 addr = cs_etm__instr_addr(etmq, trace_chan_id, - tidq->packet, offset); + u64 offset = etm->instructions_sample_period - instrs_prev; + u64 addr;
- ret = cs_etm__synth_instruction_sample( - etmq, tidq, addr, etm->instructions_sample_period); - if (ret) - return ret; + while (tidq->period_instructions >= + etm->instructions_sample_period) { + /* + * Calculate the address of the sampled instruction (-1 + * as sample is reported as though instruction has just + * been executed, but PC has not advanced to next + * instruction) + */ + addr = cs_etm__instr_addr(etmq, trace_chan_id, + tidq->packet, offset - 1); + ret = cs_etm__synth_instruction_sample( + etmq, tidq, addr, + etm->instructions_sample_period); + if (ret) + return ret;
- /* Carry remaining instructions into next sample period */ - tidq->period_instructions = instrs_over; + offset += etm->instructions_sample_period; + tidq->period_instructions -= + etm->instructions_sample_period; + } }
if (etm->sample_branches) {