Re: [RFC PATCH v3 01/16] coresight: cti: Initial CoreSight CTI Driver

Hi Mike,

This is really shaping up nicely and things are much easier to read. Just a few notes below.

On Wed, Jun 05, 2019 at 08:02:58PM +0100, Mike Leach wrote:

This introduces a baseline CTI driver and associated configuration files.

Uses the platform agnostic naming standard for CoreSight devices, along with a generic platform probing method that currently supports device tree descriptions, but allows for the ACPI bindings to be added once these have been defined for the CTI devices.

Driver will probe for the device on the AMBA bus, and load the CTI driver on CoreSight ID match to CTI IDs in tables.

Initial sysfs support for enable / disable provided.

Default CTI interconnection data is generated based on hardware register signal counts, with no additional connection information.

Signed-off-by: Mike Leach mike.leach@linaro.org

drivers/hwtracing/coresight/Kconfig | 13 + drivers/hwtracing/coresight/Makefile | 4 + .../coresight/coresight-cti-platform.c | 100 ++++ .../hwtracing/coresight/coresight-cti-sysfs.c | 82 +++ drivers/hwtracing/coresight/coresight-cti.c | 499 ++++++++++++++++++ drivers/hwtracing/coresight/coresight-cti.h | 211 ++++++++ drivers/hwtracing/coresight/coresight-priv.h | 6 + drivers/hwtracing/coresight/coresight.c | 9 + include/linux/coresight.h | 26 + 9 files changed, 950 insertions(+) create mode 100644 drivers/hwtracing/coresight/coresight-cti-platform.c create mode 100644 drivers/hwtracing/coresight/coresight-cti-sysfs.c create mode 100644 drivers/hwtracing/coresight/coresight-cti.c create mode 100644 drivers/hwtracing/coresight/coresight-cti.h

diff --git a/drivers/hwtracing/coresight/Kconfig b/drivers/hwtracing/coresight/Kconfig index 18e8d03321d6..49b894241520 100644 --- a/drivers/hwtracing/coresight/Kconfig +++ b/drivers/hwtracing/coresight/Kconfig @@ -107,4 +107,17 @@ config CORESIGHT_CPU_DEBUG properly, please refer Documentation/trace/coresight-cpu-debug.txt for detailed description and the example for usage. +config CORESIGHT_CTI

• bool "CoreSight Cross Trigger Interface (CTI) driver"
• depends on ARM || ARM64
• select CORESIGHT_LINKS_AND_SINKS
• help

•  This driver provides support for CoreSight CTI and CTM components.
  

•  These provide hardware triggering events between CoreSight trace
  

•  source and sink components. These can be used to halt trace or
  

•  inject events into the trace stream. CTI also provides a software
  

•  control to trigger the same halt events. This can provide fast trace
  

•  halt compared to disabling sources and sinks normally in driver
  

•  software.
  

endif diff --git a/drivers/hwtracing/coresight/Makefile b/drivers/hwtracing/coresight/Makefile index 3c0ac421e211..43d563705e98 100644 --- a/drivers/hwtracing/coresight/Makefile +++ b/drivers/hwtracing/coresight/Makefile @@ -17,3 +17,7 @@ obj-$(CONFIG_CORESIGHT_SOURCE_ETM4X) += coresight-etm4x.o \ obj-$(CONFIG_CORESIGHT_STM) += coresight-stm.o obj-$(CONFIG_CORESIGHT_CPU_DEBUG) += coresight-cpu-debug.o obj-$(CONFIG_CORESIGHT_CATU) += coresight-catu.o +obj-$(CONFIG_CORESIGHT_CTI) += coresight-cti.o \

• 		coresight-cti-platform.o \
  

• 		coresight-cti-sysfs.o
  

diff --git a/drivers/hwtracing/coresight/coresight-cti-platform.c b/drivers/hwtracing/coresight/coresight-cti-platform.c new file mode 100644 index 000000000000..068932ac9e90 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cti-platform.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • Copyright (c) 2019, The Linux Foundation. All rights reserved.
• */

+#include <linux/of.h>

+#include "coresight-cti.h"

+#ifdef CONFIG_OF

+/*

• • CTI can be bound to a CPU, or a system device.
• • Reflect this in the return value and do not default to cpu 0
• */

+static int of_cti_get_cpu(const struct device_node *node) +{

• int cpu;
• struct device_node *dn;
• dn = of_parse_phandle(node, "cpu", 0);
• /* CTI Affinity defaults to no cpu */
• if (!dn)

• return -1;
  

• cpu = of_cpu_node_to_id(dn);
• of_node_put(dn);
• /* No Affinity if no cpu nodes are found */
• return (cpu < 0) ? -1 : cpu;

+}

+/* get the hardware configuration & connection data. */ +int of_cti_get_hw_data(struct device *dev,

•        struct device_node *np,
  

•        struct cti_drvdata *drvdata)
  

+{

• int rc = 0;
• struct cti_device *cti_dev = &drvdata->ctidev;
• /* if no connections, just add a single default based on max IN-OUT */
• if (cti_dev->nr_trig_con == 0)

• rc = cti_add_default_connection(drvdata);
  

• return rc;

+}

+/*

• • Platform data for the CTI does not have the same connection info
• • as the trace path components. Implement specific function to
• • avoid warnings of missing connections.
• */

+int of_get_coresight_cti_platform_data(struct device *dev,

• 		       struct coresight_platform_data *pdata)
  

+{

• int ret = 0;
• struct device_node *node = dev->of_node;
• struct cti_drvdata *drvdata = dev_get_drvdata(dev);
• /* check for cpu association on default / v8 CTI */
• drvdata->ctidev.cpu = of_cti_get_cpu(node);
• /* get some CTI specifics */
• ret = of_cti_get_hw_data(dev, node, drvdata);
• return ret;

+} +#else +inline int +of_get_coresight_cti_platform_data(struct device *dev,

• 		   struct coresight_platform_data *pdata)
  

+{

• return -ENOENT;

+}

+#endif

+struct coresight_platform_data * +coresight_cti_get_platform_data(struct device *dev) +{

• int ret = -ENOENT;
• struct coresight_platform_data *pdata = NULL;
• struct fwnode_handle *fwnode = dev_fwnode(dev);
• if (IS_ERR_OR_NULL(fwnode))

• goto error;
  

• pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
• if (!pdata) {

• ret = -ENOMEM;
  

• goto error;
  

• }
• if (is_of_node(fwnode))

• ret = of_get_coresight_cti_platform_data(dev, pdata);
  

• if (!ret)

• return pdata;
  

+error:

• return ERR_PTR(ret);

+}

diff --git a/drivers/hwtracing/coresight/coresight-cti-sysfs.c b/drivers/hwtracing/coresight/coresight-cti-sysfs.c new file mode 100644 index 000000000000..deb882a6a367 --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cti-sysfs.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • Copyright (c) 2019 Linaro Limited, All rights reserved.
• • Author: Mike Leach mike.leach@linaro.org
• */

+#include <linux/coresight.h>

+#include "coresight-cti.h"

+/* basic attributes */ +static ssize_t enable_show(struct device *dev,

• 	   struct device_attribute *attr,
  

• 	   char *buf)
  

+{

• int enable_req, cpuid;
• bool enabled, powered;
• struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
• ssize_t size = 0;
• enable_req = atomic_read(&drvdata->config.enable_req_count);
• spin_lock(&drvdata->spinlock);
• powered = drvdata->config.hw_powered;
• enabled = drvdata->config.hw_enabled;
• cpuid = drvdata->ctidev.cpu;
• spin_unlock(&drvdata->spinlock);
• if (cpuid >= 0) {

• if (powered) {
  

• 	size = scnprintf(buf, PAGE_SIZE,
  

• 			 "cti %s; cpu%d powered;\n",
  

• 			 enabled ? "enabled" : "disabled",
  

• 			 cpuid);
  

• } else {
  

• 	size = scnprintf(buf, PAGE_SIZE,
  

• 		"cti %s; cpu%d unpowered;\n",
  

• 		enable_req ? "enable req" : "disable req",
  

• 		cpuid);
  

• }
  

• } else {

• size = scnprintf(buf, PAGE_SIZE, "cti %s; no assoc cpu;\n",
  

• 	enabled ? "enabled" : "disabled");
  

• }
• return size;

+}

+static ssize_t enable_store(struct device *dev,

• 	    struct device_attribute *attr,
  

• 	    const char *buf, size_t size)
  

+{

• int ret = 0;
• unsigned long val;
• struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
• ret = kstrtoul(buf, 16, &val);
• if (ret)

• return ret;
  

• if (val)

• ret = cti_enable(drvdata->csdev, NULL);
  

• else

• ret = cti_disable(drvdata->csdev, NULL);
  

• if (ret)

• return ret;
  

• return size;

+} +static DEVICE_ATTR_RW(enable);

+/* attribute and group sysfs tables. */ +static struct attribute *coresight_cti_attrs[] = {

• &dev_attr_enable.attr,
• NULL,

+};

+static const struct attribute_group coresight_cti_group = {

• .attrs = coresight_cti_attrs,

+};

+const struct attribute_group *coresight_cti_groups[] = {

• &coresight_cti_group,
• NULL,

+}; diff --git a/drivers/hwtracing/coresight/coresight-cti.c b/drivers/hwtracing/coresight/coresight-cti.c new file mode 100644 index 000000000000..4b3a5a91c4ff --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cti.c @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • Copyright (c) 2019 Linaro Limited, All rights reserved.
• • Author: Mike Leach mike.leach@linaro.org
• */

+#include "coresight-cti.h"

+/**

• • CTI devices can be associated with a PE, or be connected to CoreSight
• • hardware. We have a list of all CTIs, and a subset array associated
• • with individual PEs for pwr management as they will power up in the
• • PE power domain.
• • At this point we assume that the non-CPU CTIs are always powered as
• • we do with sinks etc.
• • We leave the client to figure out if all the CTIs are interconnected with
• • the same CTM, in general this is the case but does not always have to be.
• */

+struct ect_node {

• struct cti_drvdata *cti_drv;
• struct list_head next;

+};

+/* net of CTI devices connected via CTM */ +LIST_HEAD(ect_net);

+/* protect the list */ +static DEFINE_MUTEX(ect_mutex);

+#define csdev_to_cti_drvdata(csdev) \

• dev_get_drvdata(csdev->dev.parent)

+/*

• • CTI naming. CTI bound to cores will have the name cti_cpu<N> where
• • N is the CPU ID. System CTIs will have the name cti_sys<I> where I
• • is an index allocated by order of discovery.
• • CTI device name list - for CTI not bound to cores.
• */

+DEFINE_CORESIGHT_DEVLIST(cti_sys_devs, "cti_sys");

+/* write set of regs to hardware - call with spinlock claimed */ +static void cti_write_all_hw_regs(struct cti_drvdata *drvdata) +{

• struct cti_config *config = &drvdata->config;
• int i;
• CS_UNLOCK(drvdata->base);
• /* disable CTI before writing registers */
• writel_relaxed(0, drvdata->base + CTICONTROL);
• /* write the CTI trigger registers */
• for (i = 0; i < config->nr_trig_max; i++) {

• writel_relaxed(config->ctiinen[i], drvdata->base + CTIINEN(i));
  

• writel_relaxed(config->ctiouten[i],
  

• 	drvdata->base + CTIOUTEN(i));
  

Indentation problem.

• }
• /* other regs */
• writel_relaxed(config->ctigate, drvdata->base + CTIGATE);
• writel_relaxed(config->asicctl, drvdata->base + ASICCTL);
• writel_relaxed(config->ctiappset, drvdata->base + CTIAPPSET);
• /* re-enable CTI */
• writel_relaxed(1, drvdata->base + CTICONTROL);
• CS_LOCK(drvdata->base);

+}

+static void cti_enable_hw_smp_call(void *info) +{

• struct cti_drvdata *drvdata = info;
• cti_write_all_hw_regs(drvdata);

+}

+/* write regs to hardware and enable */ +static int cti_enable_hw(struct cti_drvdata *drvdata, bool update_refcount)

Is the update_refcount used at some point? If not please remove.

+{

• struct cti_config *config = &drvdata->config;
• struct device *dev = &drvdata->csdev->dev;
• int rc = 0;
• pm_runtime_get_sync(dev->parent);
• spin_lock(&drvdata->spinlock);
• /* no need to do anything if enabled or unpowered*/
• if (config->hw_enabled || !config->hw_powered)

• goto cti_not_enabled;
  

• /* claim the device */
• rc = coresight_claim_device(drvdata->base);
• if (rc)

• goto cti_err_not_enabled;
  

• if (drvdata->ctidev.cpu >= 0) {

• rc = smp_call_function_single(drvdata->ctidev.cpu,
  

• 			 cti_enable_hw_smp_call,
  

• 			 drvdata, 1);
  

• if (rc)
  

• 	goto cti_err_not_enabled;
  

• } else

• cti_write_all_hw_regs(drvdata);
  

• config->hw_enabled = true;
• if (update_refcount)

• atomic_inc(&drvdata->config.enable_req_count);
  

• spin_unlock(&drvdata->spinlock);
• return rc;
• /* not enabled in this call */

+cti_not_enabled:

• if (update_refcount)

• atomic_inc(&drvdata->config.enable_req_count);
  

• /* cannot enable due to error */

+cti_err_not_enabled:

• spin_unlock(&drvdata->spinlock);
• pm_runtime_put(dev->parent);
• return rc;

+}

+/* disable hardware */ +static int cti_disable_hw(struct cti_drvdata *drvdata, bool update_refcount) +{

• struct cti_config *config = &drvdata->config;
• struct device *dev = &drvdata->csdev->dev;
• spin_lock(&drvdata->spinlock);
• /* check refcount - disable on 0 */
• if (update_refcount &&

•    (atomic_dec_return(&drvdata->config.enable_req_count) > 0))
  

• goto cti_not_disabled;
  

• /* no need to do anything if disabled or cpu unpowered*/
• if (!config->hw_enabled || !config->hw_powered)

• goto cti_not_disabled;
  

• CS_UNLOCK(drvdata->base);
• /* disable CTI */
• writel_relaxed(0, drvdata->base + CTICONTROL);
• config->hw_enabled = false;
• coresight_disclaim_device_unlocked(drvdata->base);
• CS_LOCK(drvdata->base);
• spin_unlock(&drvdata->spinlock);
• pm_runtime_put(dev);
• return 0;
• /* not disabled this call */

+cti_not_disabled:

• spin_unlock(&drvdata->spinlock);
• return 0;

+}

+static void cti_set_default_config(struct device *dev,

• 		   struct cti_drvdata *drvdata)
  

+{

• struct cti_config *config = &drvdata->config;
• u32 devid;
• /*

• * Look at the HW DEVID register for some of the HW settings.
  

• * DEVID[15:8] - max number of in / out triggers.
  

• */
  

• devid = readl_relaxed(drvdata->base + CORESIGHT_DEVID);
• config->nr_trig_max = (int)((devid & 0xFF00) >> 8);
• /*

• * no current hardware should exceed this, but protect the driver
  

• * in case of fault / out of spec hw
  

• */
  

• if (config->nr_trig_max > CTIINOUTEN_MAX) {

• dev_warn_once(dev,
  

• 	"Limiting HW MaxTrig value(%d) to driver max(%d)\n",
  

• 	config->nr_trig_max, CTIINOUTEN_MAX);
  

• config->nr_trig_max = CTIINOUTEN_MAX;
  

• }
• /* DEVID[19:16] - number of CTM channels */
• config->nr_ctm_channels = (int)((devid & 0xF0000) >> 16);
• /* Most regs default to 0 as zalloc'ed except...*/
• config->trig_filter_enable = 1;
• config->ctigate = GENMASK(config->nr_ctm_channels - 1, 0);
• atomic_set(&config->enable_req_count, 0);

+}

+/*

• • Add a connection entry to the list of connections for this
• • CTI device.
• */

+static int cti_add_connection_entry(struct cti_drvdata *drvdata,

• 		    struct cti_trig_grp *in_info,
  

• 		    struct cti_trig_grp *out_info,
  

• 		    struct coresight_device *csdev,
  

• 		    const char *assoc_dev_name)
  

+{

• struct cti_trig_con *tc;
• struct cti_device *cti_dev = &drvdata->ctidev;
• tc = kzalloc(sizeof(struct cti_trig_con), GFP_KERNEL);
• if (tc == 0)

if (!tc) or NULL as Suzuki already pointed out.

• return -ENOMEM;
  

• tc->con_dev = csdev;
• /*

• * Prefer actual associated CS device dev name to supplied value -
  

• * which is likely to be node name / other conn name.
  

• */
  

• if (csdev)

• tc->con_dev_name = kstrdup(dev_name(&csdev->dev), GFP_KERNEL);
  

• else if (assoc_dev_name != NULL)

• tc->con_dev_name = kstrdup(assoc_dev_name, GFP_KERNEL);
  

• tc->con_in = in_info;
• tc->con_out = out_info;
• list_add_tail(&tc->node, &cti_dev->trig_cons);
• cti_dev->nr_trig_con++;
• /* add connection usage bit info to overall info */
• drvdata->config.trig_in_use |= in_info->used_mask;
• drvdata->config.trig_out_use |= out_info->used_mask;
• return 0;

+}

+/*

• • Add a default connection if nothing else is specified.
• • single connection based on max in/out info, no assoc device
• */

+int cti_add_default_connection(struct cti_drvdata *drvdata) +{

• int ret = 0, idx;
• struct cti_trig_grp *in = 0, *out = 0;

NULL

• int n_trigs = drvdata->config.nr_trig_max;
• u32 n_trig_mask = GENMASK(n_trigs - 1, 0);
• int *in_sig_types = 0, *out_sig_types = 0;

NULL

• in = kzalloc(sizeof(struct cti_trig_grp), GFP_KERNEL);
• if (!in) {

• ret = -ENOMEM;
  

• goto conn_add_err;
  

• }
• out = kzalloc(sizeof(struct cti_trig_grp), GFP_KERNEL);
• if (!out) {

• ret = -ENOMEM;
  

• goto conn_add_err;
  

• }
• in_sig_types = kzalloc(sizeof(int) * n_trigs, GFP_KERNEL);
• if (!in_sig_types) {

• ret = -ENOMEM;
  

• goto conn_add_err;
  

• }
• out_sig_types = kzalloc(sizeof(int) * n_trigs, GFP_KERNEL);
• if (!out_sig_types) {

• ret = -ENOMEM;
  

• goto conn_add_err;
  

• }
• /* signal types marked as default CTITRIG_GEN_IO */
• for (idx = 0; idx < n_trigs; idx++) {

• in_sig_types[idx] = CTITRIG_GEN_IO;
  

• out_sig_types[idx] = CTITRIG_GEN_IO;
  

• }
• /*

• * Assume max trigs for in and out,
  

• * all used, default sig types allocated
  

• */
  

• in->nr_sigs = n_trigs;
• in->used_mask = n_trig_mask;
• in->sig_types = in_sig_types;
• out->nr_sigs = n_trigs;
• out->used_mask = n_trig_mask;
• out->sig_types = out_sig_types;
• ret = cti_add_connection_entry(drvdata, in, out, NULL, "default");
• if (ret)

• goto conn_add_err;
  

• return ret;

+conn_add_err:

• kfree(in);
• kfree(out);
• kfree(out_sig_types);
• kfree(in_sig_types);
• return ret;

+}

+/** cti ect operations **/ +int cti_enable(struct coresight_device *csdev, void *__unused)

I forgot to mention this in the earlier revision - please remove the void *. We can introduce it when it is needed. Same for cti_disable().

+{

• struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev);
• /* enable hardware with refcount */
• return cti_enable_hw(drvdata, true);

+}

+int cti_disable(struct coresight_device *csdev, void *__unused) +{

• struct cti_drvdata *drvdata = csdev_to_cti_drvdata(csdev);
• /* disable hardware with refcount */
• return cti_disable_hw(drvdata, true);

+}

+const struct coresight_ops_ect cti_ops_ect = {

• .enable = cti_enable,
• .disable = cti_disable,

+};

+const struct coresight_ops cti_ops = {

• .ect_ops = &cti_ops_ect,

+};

+static int cti_probe(struct amba_device *adev, const struct amba_id *id) +{

• int ret = 0;
• void __iomem *base;
• struct device *dev = &adev->dev;
• struct cti_drvdata *drvdata = NULL;
• struct coresight_desc cti_desc;
• struct coresight_platform_data *pdata = NULL;
• struct resource *res = &adev->res;
• struct ect_node *ect_nd = NULL;
• /* node to keep track of CTI net */
• ect_nd = devm_kzalloc(dev, sizeof(struct ect_node), GFP_KERNEL);
• if (!ect_nd) {

• ret = -ENOMEM;
  

• goto err_out;
  

• }
• /* driver data*/
• drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
• if (!drvdata) {

• ret = -ENOMEM;
  

• dev_info(dev, "%s, mem err\n", __func__);
  

• goto err_out;
  

• }
• /* Validity for the resource is already checked by the AMBA core */
• base = devm_ioremap_resource(dev, res);
• if (IS_ERR(base)) {

• ret = PTR_ERR(base);
  

• dev_info(dev, "%s, remap err\n", __func__);
  

• goto err_out;
  

• }
• drvdata->base = base;
• /* links between dev and drvdata*/
• dev_set_drvdata(dev, drvdata);
• /* default CTI device info */
• drvdata->ctidev.cpu = -1;
• drvdata->ctidev.nr_trig_con = 0;
• drvdata->ctidev.ctm_id = 0;
• INIT_LIST_HEAD(&drvdata->ctidev.trig_cons);
• spin_lock_init(&drvdata->spinlock);
• /* initialise CTI driver config values */
• cti_set_default_config(dev, drvdata);
• /* Parse the .dts for connections and signals */
• pdata = coresight_cti_get_platform_data(dev);
• if (IS_ERR(pdata)) {

• dev_info(dev, "coresight_cti_get_platform_data err\n");
  

• ret =  PTR_ERR(pdata);
  

• goto err_out;
  

• }
• /* default to powered - could change on PM notifications */
• drvdata->config.hw_powered = true;
• /* set up device name - will depend if cpu bound or otherwise */
• if (drvdata->ctidev.cpu >= 0)

• cti_desc.name = devm_kasprintf(dev, GFP_KERNEL, "cti_cpu%d",
  

• 			       drvdata->ctidev.cpu);
  

• else

• cti_desc.name = coresight_alloc_device_name(&cti_sys_devs, dev);
  

• if (!cti_desc.name) {

• ret = -ENOMEM;
  

• goto err_out;
  

• }
• /* set up coresight component description */
• cti_desc.pdata = pdata;
• cti_desc.type = CORESIGHT_DEV_TYPE_ECT;
• cti_desc.subtype.ect_subtype = CORESIGHT_DEV_SUBTYPE_ECT_CTI;
• cti_desc.ops = &cti_ops;
• cti_desc.groups = coresight_cti_groups;
• cti_desc.dev = dev;
• drvdata->csdev = coresight_register(&cti_desc);
• if (IS_ERR(drvdata->csdev)) {

• ret = PTR_ERR(drvdata->csdev);
  

• goto err_out;
  

• }
• /* add to list of CTI devices */
• mutex_lock(&ect_mutex);
• ect_nd->cti_drv = drvdata;
• list_add(&ect_nd->next, &ect_net);
• mutex_unlock(&ect_mutex);
• /* all done - dec pm refcount */
• pm_runtime_put(&adev->dev);
• if (drvdata->ctidev.cpu >= 0) {

• dev_info(dev, "%s: cti-CPU%d initialized\n", cti_desc.name,
  

• 	 drvdata->ctidev.cpu);
  

• } else {

• dev_info(dev, "%s: cti-system initialized\n", cti_desc.name);
  

• }
• return 0;

+err_out:

• return ret;

+}

+/* free all connection info from the driver */ +void cti_free_conn_info(struct cti_drvdata *drvdata) +{

• struct cti_trig_con *tc, *tc_tmp;
• list_for_each_entry_safe(tc, tc_tmp,

• 		  &drvdata->ctidev.trig_cons, node) {
  

• kfree(tc->con_in->sig_types);
  

• kfree(tc->con_in);
  

• kfree(tc->con_out->sig_types);
  

• kfree(tc->con_out);
  

• kfree(tc->con_dev_name);
  

• list_del(&tc->node);
  

• kfree(tc);
  

• }

+}

+/*

• • Free up CTI specific resources
• • • called from coresight_device_release on coresight_unregister.
• */

+void cti_device_release(struct device *dev) +{

• struct cti_drvdata *drvdata = dev_get_drvdata(dev->parent);
• struct ect_node *ect_item, *ect_tmp;
• mutex_lock(&ect_mutex);
• /* clear the connection list items */
• cti_free_conn_info(drvdata);
• /* remove from the list */
• list_for_each_entry_safe(ect_item, ect_tmp, &ect_net, next) {

• if (ect_item->cti_drv == drvdata) {
  

• 	list_del(&ect_item->next);
  

• 	goto ect_list_item_removed;
  

• }
  

• }

+ect_list_item_removed:

• mutex_unlock(&ect_mutex);

+} +EXPORT_SYMBOL_GPL(cti_device_release);

+static struct amba_cs_uci_id uci_id_cti[] = {

• {

• /*  CTI UCI data */
  

• .devarch	= 0x47701a14, /* devarch value for CTI v2 */
  

• .devarch_mask	= 0xfff0ffff,
  

• .devtype	= 0x00000014, /* maj(0x4-debug) min(0x1-ECT) */
  

• }

+};

+static const struct amba_id cti_ids[] = {

• CS_AMBA_ID(0x000bb906), /* Coresight CTI (SoC 400), C-A72, C-A57 */
• CS_AMBA_ID(0x000bb922), /* CTI - C-A8 */
• CS_AMBA_ID(0x000bb9a8), /* CTI - C-A53 */
• CS_AMBA_ID(0x000bb9aa), /* CTI - C-A73 */
• CS_AMBA_UCI_ID(0x000bb9da, uci_id_cti), /* CTI - C-A35 */
• CS_AMBA_UCI_ID(0x000bb9ed, uci_id_cti), /* Coresight CTI (SoC 600) */
• { 0, 0},

+};

+static struct amba_driver cti_driver = {

• .drv = {

• .name	= "coresight-cti",
  

• .owner = THIS_MODULE,
  

• .suppress_bind_attrs = true,
  

• },
• .probe = cti_probe,
• .id_table = cti_ids,

+}; +builtin_amba_driver(cti_driver); diff --git a/drivers/hwtracing/coresight/coresight-cti.h b/drivers/hwtracing/coresight/coresight-cti.h new file mode 100644 index 000000000000..bc4c9bdf745e --- /dev/null +++ b/drivers/hwtracing/coresight/coresight-cti.h @@ -0,0 +1,211 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/*

• • Copyright (c) 2018 Linaro Limited, All rights reserved.
• • Author: Mike Leach mike.leach@linaro.org
• */

+#ifndef _CORESIGHT_CORESIGHT_CTI_H +#define _CORESIGHT_CORESIGHT_CTI_H

+#include <asm/local.h> +#include <linux/spinlock.h> +#include "coresight-priv.h"

+/*

• • Device registers
• • 0x000 - 0x144: CTI programming and status
• • 0xEDC - 0xEF8: CTI integration test.
• • 0xF00 - 0xFFC: Coresight management registers.
• */

+/* CTI programming registers */ +#define CTICONTROL 0x000 +#define CTIINTACK 0x010 +#define CTIAPPSET 0x014 +#define CTIAPPCLEAR 0x018 +#define CTIAPPPULSE 0x01C +#define CTIINEN(n) (0x020 + (4 * n)) +#define CTIOUTEN(n) (0x0A0 + (4 * n)) +#define CTITRIGINSTATUS 0x130 +#define CTITRIGOUTSTATUS 0x134 +#define CTICHINSTATUS 0x138 +#define CTICHOUTSTATUS 0x13C +#define CTIGATE 0x140 +#define ASICCTL 0x144 +/* Integration test registers */ +#define ITCHINACK 0xEDC /* WO CTI CSSoc 400 only*/ +#define ITTRIGINACK 0xEE0 /* WO CTI CSSoc 400 only*/ +#define ITCHOUT 0xEE4 /* WO RW-600 */ +#define ITTRIGOUT 0xEE8 /* WO RW-600 */ +#define ITCHOUTACK 0xEEC /* RO CTI CSSoc 400 only*/ +#define ITTRIGOUTACK 0xEF0 /* RO CTI CSSoc 400 only*/ +#define ITCHIN 0xEF4 /* RO */ +#define ITTRIGIN 0xEF8 /* RO */ +/* management registers */ +#define CTIDEVAFF0 0xFA8 +#define CTIDEVAFF1 0xFAC

+/*

• • CTI CSSoc 600 has a max of 32 trigger signals per direction.
• • CTI CSSoc 400 has 8 IO triggers - other CTIs can be impl def.
• • Max of in and out defined in the DEVID register.
• • • pick up actual number used from .dts parameters if present.
• */

+#define CTIINOUTEN_MAX 32

+/*

• • CTI Trigger signal type definitions.
• • Labels for certain trigger interconnections between the CTI
• • and standard CS components.
• • Must match values in ./include/dt-bindings/arm/coresight-cti.h
• */

+#define CTITRIG_GEN_IO 0 +#define CTITRIG_GEN_INTREQ 1 +#define CTITRIG_GEN_INTACK 2 +#define CTITRIG_GEN_HALTREQ 3 +#define CTITRIG_GEN_RESTARTREQ 4 +#define CTITRIG_PE_EDBGREQ 5 +#define CTITRIG_PE_DBGRESTART 6 +#define CTITRIG_PE_CTIIRQ 7 +#define CTITRIG_PE_PMUIRQ 8 +#define CTITRIG_PE_DBGTRIGGER 9 +#define CTITRIG_ETM_EXTOUT 10 +#define CTITRIG_ETM_EXTIN 11 +#define CTITRIG_SNK_FULL 12 +#define CTITRIG_SNK_ACQCOMP 13 +#define CTITRIG_SNK_FLUSHCOMP 14 +#define CTITRIG_SNK_FLUSHIN 15 +#define CTITRIG_SNK_TRIGIN 16 +#define CTITRIG_STM_ASYNCOUT 17 +#define CTITRIG_STM_TOUT_SPTE 18 +#define CTITRIG_STM_TOUT_SW 19 +#define CTITRIG_STM_TOUT_HETE 20 +#define CTITRIG_STM_HWEVENT 21 +#define CTITRIG_ELA_TSTART 22 +#define CTITRIG_ELA_TSTOP 23 +#define CTITRIG_ELA_DBGREQ 24

+/**

• • Group of related trigger signals
• • @nr_sigs: number of signals in the group.
• • @used_mask: bitmask representing the signal indexes in the group.
• • @sig_types: array of types for the signals, length nr_sigs.
• */

+struct cti_trig_grp {

• int nr_sigs;
• u32 used_mask;
• int *sig_types;

+};

+/**

• • Trigger connection - connection between a CTI and other (coresight) device
• • lists input and output trigger signals for the device
• • @con_in: connected CTIIN signals for the device.
• • @con_out: connected CTIOUT signals for the device.
• • @con_dev: coresight device connected to the CTI, NULL if not CS device
• • @con_dev_name: name of connected device (CS or CPU)
• • @node: entry node in list of connections.
• */

+struct cti_trig_con {

• struct cti_trig_grp *con_in;
• struct cti_trig_grp *con_out;
• struct coresight_device *con_dev;
• char *con_dev_name;
• struct list_head node;

+};

+/**

• • struct cti_device - description of CTI device properties.
• • @nt_trig_con: Number of external devices connected to this device.
• • @ctm_id: which CTM this device is connected to (by default it is

• •      assumed there is a single CTM per SoC, ID 0).
    

• • @trig_cons: list of connections to this device.
• • @cpu: CPU ID if associated with CPU, -1 otherwise.
• */

+struct cti_device {

• int nr_trig_con;
• u32 ctm_id;
• struct list_head trig_cons;
• int cpu;

+};

+/**

• • struct cti_config - configuration of the CTI device hardware
• • hardware description from RO ID regs
• • @nr_trig_max: Max number of trigger signals implemented on device.

• • (max of trig_in or trig_out)
    

• • @nr_ctm_channels: number of available CTM channels
• • cti enable control
• • @enable_req_count: CTI is enabled alongside >=1 associated devices.
• • @hw_enabled: true if hw is currently enabled.
• • @hw_powered: true if associated cpu powered on, or no cpu.
• • registered triggers and filtering
• • @trig_in_use: bitfield of in triggers registered as in use.
• • @trig_out_use: bitfield of out triggers registered as in use.
• • @trig_out_filter: bitfield of out triggers that are blocked if filter
• • enabled. Typically this would be dbgreq / restart on a core CTI.
• • @trig_filter_enable: 1 if filtering enabled.
• • cti software programmable regs:
• • @ctiappset: CTI Software application channel set.
• • @ctiinout_sel: register selector for INEN and OUTEN regs.
• • @ctiinen: enable input trigger to a channel.
• • @ctiouten: enable output trigger from a channel.
• • @ctigate: gate channel output from CTI to CTM.
• • @asicctl: asic control register.
• */

+struct cti_config {

• /* hardware description */
• int nr_ctm_channels;
• int nr_trig_max;
• /* cti enable control */
• atomic_t enable_req_count;
• bool hw_enabled;
• bool hw_powered;
• /* registered triggers and filtering */
• u32 trig_in_use;
• u32 trig_out_use;
• u32 trig_out_filter;
• int trig_filter_enable;
• u8 xtrig_rchan_sel;
• /* cti cross trig programmable regs */
• u32 ctiappset;
• u8 ctiinout_sel;
• u32 ctiinen[CTIINOUTEN_MAX];
• u32 ctiouten[CTIINOUTEN_MAX];
• u32 ctigate;
• u32 asicctl;

+};

+/**

• • struct cti_drvdata - specifics for the CTI device
• • @base: Memory mapped base address for this component..
• • @csdev: Standard CoreSight device information.
• • @ctidev: Extra information needed by the CTI/CTM framework.
• • @spinlock: Control data access to one at a time.
• • @config: Configuration data for this CTI device.
• */

+struct cti_drvdata {

• void __iomem *base;
• struct coresight_device *csdev;
• struct cti_device ctidev;
• spinlock_t spinlock;
• struct cti_config config;

+};

+/* private cti driver fns & vars */ +extern const struct attribute_group *coresight_cti_groups[]; +int cti_add_default_connection(struct cti_drvdata *drvdata); +int cti_enable(struct coresight_device *csdev, void *__unused); +int cti_disable(struct coresight_device *csdev, void *__unused); +struct coresight_platform_data * +coresight_cti_get_platform_data(struct device *dev);

+#endif /* _CORESIGHT_CORESIGHT_CTI_H */ diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h index 8b07fe55395a..dd2991dfbf4c 100644 --- a/drivers/hwtracing/coresight/coresight-priv.h +++ b/drivers/hwtracing/coresight/coresight-priv.h @@ -161,6 +161,12 @@ static inline int etm_readl_cp14(u32 off, unsigned int *val) { return 0; } static inline int etm_writel_cp14(u32 off, u32 val) { return 0; } #endif +#ifdef CONFIG_CORESIGHT_CTI +extern void cti_device_release(struct device *dev); +#else +static inline void cti_device_release(struct device *dev) {}; +#endif

/*

• Macros and inline functions to handle CoreSight UCI data and driver
• private data in AMBA ID table entries, and extract data values.

diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index 86d1fc2c1bd4..1c9ba2fd6879 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -972,6 +972,9 @@ static struct device_type coresight_dev_type[] = { { .name = "helper", },

• {

• .name = "ect",
  

• },

}; static void coresight_device_release(struct device *dev) @@ -979,6 +982,12 @@ static void coresight_device_release(struct device *dev) struct coresight_device *csdev = to_coresight_device(dev); fwnode_handle_put(csdev->dev.fwnode);

• /* additional info to release for CTI */
• if ((csdev->type == CORESIGHT_DEV_TYPE_ECT) &&

•    (csdev->subtype.ect_subtype == CORESIGHT_DEV_SUBTYPE_ECT_CTI))
  

• cti_device_release(dev);
  

• kfree(csdev->refcnt); kfree(csdev);

} diff --git a/include/linux/coresight.h b/include/linux/coresight.h index a2b68823717b..0a2a69b5ade8 100644 --- a/include/linux/coresight.h +++ b/include/linux/coresight.h @@ -41,6 +41,7 @@ enum coresight_dev_type { CORESIGHT_DEV_TYPE_LINKSINK, CORESIGHT_DEV_TYPE_SOURCE, CORESIGHT_DEV_TYPE_HELPER,

• CORESIGHT_DEV_TYPE_ECT,

}; enum coresight_dev_subtype_sink { @@ -68,6 +69,12 @@ enum coresight_dev_subtype_helper { CORESIGHT_DEV_SUBTYPE_HELPER_CATU, }; +/* Embedded Cross Trigger (ECT) sub-types */ +enum coresight_dev_subtype_ect {

• CORESIGHT_DEV_SUBTYPE_ECT_NONE,
• CORESIGHT_DEV_SUBTYPE_ECT_CTI,

+};

/**

• union coresight_dev_subtype - further characterisation of a type
• @sink_subtype: type of sink this component is, as defined

@@ -78,6 +85,8 @@ enum coresight_dev_subtype_helper {

• 	by @coresight_dev_subtype_source.
  

• @helper_subtype: type of helper this component is, as defined

• 	by @coresight_dev_subtype_helper.
  

• • @ect_subtype: type of cross trigger this component is, as

• • 	defined by @coresight_dev_subtype_ect
    

  */

union coresight_dev_subtype { /* We have some devices which acts as LINK and SINK */ @@ -87,6 +96,7 @@ union coresight_dev_subtype { }; enum coresight_dev_subtype_source source_subtype; enum coresight_dev_subtype_helper helper_subtype;

• enum coresight_dev_subtype_ect ect_subtype;

}; /** @@ -196,6 +206,7 @@ static struct coresight_dev_list (var) = { \ #define sink_ops(csdev) csdev->ops->sink_ops #define link_ops(csdev) csdev->ops->link_ops #define helper_ops(csdev) csdev->ops->helper_ops +#define ect_ops(csdev) csdev->ops->ect_ops /**

• struct coresight_ops_sink - basic operations for a sink

@@ -262,11 +273,26 @@ struct coresight_ops_helper { int (*disable)(struct coresight_device *csdev, void *data); }; +/**

• • struct coresight_ops_ect - Ops for an embedded cross trigger device
• • All operations could pass in a device specific data, which could
• • help the ect device to determine what to do.
• • @enable : Enable the device
• • @disable : Disable the device
• */

+struct coresight_ops_ect {

• int (*enable)(struct coresight_device *csdev, void *data);
• int (*disable)(struct coresight_device *csdev, void *data);

+};

struct coresight_ops { const struct coresight_ops_sink *sink_ops; const struct coresight_ops_link *link_ops; const struct coresight_ops_source *source_ops; const struct coresight_ops_helper *helper_ops;

• const struct coresight_ops_ect *ect_ops;

};

#ifdef CONFIG_CORESIGHT

2.20.1

---

CoreSight mailing list CoreSight@lists.linaro.org https://lists.linaro.org/mailman/listinfo/coresight