On 2024/9/10 18:01, Mao Jinlong wrote:
Some HW has static trace id which cannot be changed via software programming. For this case, configure the trace id in device tree with "arm,static-trace-id = <xxx>", and call coresight_trace_id_get_static_system_id with the trace id value in device probe function. The id will be reserved for the HW all the time if the device is probed.
Changes since V3:
- Adda new API function
int coresight_trace_id_get_system_static_id(int trace_id). 2. Use the term "static trace id" for these devices where the hardware sets a non-programmable trace ID.
Changes since V2:
- Change "trace-id" to "arm,trace-id".
- Add trace id flag for getting preferred id or ODD id.
Changes since V1:
- Add argument to coresight_trace_id_get_system_id for preferred id
instead of adding new function coresight_trace_id_reserve_system_id. 2. Add constraint to trace-id in dt-binding file.
Mao Jinlong (3): dt-bindings: arm: Add arm,trace-id for coresight dummy source coresight: Add support to get static id for system trace sources coresight: dummy: Add static trace id support for dummy source
.../sysfs-bus-coresight-devices-dummy-source | 15 +++++ .../arm/arm,coresight-dummy-source.yaml | 6 ++ drivers/hwtracing/coresight/coresight-dummy.c | 59 +++++++++++++++++-- .../hwtracing/coresight/coresight-platform.c | 26 ++++++++ .../hwtracing/coresight/coresight-trace-id.c | 38 ++++++++---- .../hwtracing/coresight/coresight-trace-id.h | 9 +++ include/linux/coresight.h | 1 + 7 files changed, 140 insertions(+), 14 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-dummy-source
Hi Reviewers,
Gentle remainder for the review.
Thanks Jinlong Mao