On 10/27/2023 5:27 AM, Rob Herring wrote:
On Wed, Oct 25, 2023 at 10:53:27AM +0800, Tao Zhang wrote:
Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register) for TPDM. It specifies the number of CMB MSR registers supported by the TDPM.
Signed-off-by: Tao Zhang quic_taozha@quicinc.com Signed-off-by: Mao Jinlong quic_jinlmao@quicinc.com
Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index f9a2025..a586b80a 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -69,6 +69,15 @@ properties: minimum: 0 maximum: 32
- qcom,cmb-msrs-num:
- description:
Specifies the number of CMB MSR(mux select register) registers supportedby the monitor. If this property is not configured or set to 0, it meansthis TPDM doesn't support CMB MSR.- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 0
- maximum: 32
default: 0
If the TPDM doesn't support CMB MSR, we will not configure this property. Set to 0 to indicate
that CMB MSR is not supported and is only an optional method.
Is it necessary to add this "default" value here?
Best,
Tao
- clocks: maxItems: 1
@@ -124,6 +133,7 @@ examples: reg-names = "tpdm-base"; qcom,cmb-element-size = /bits/ 8 <64>;
qcom,cmb-msrs-num = <32>;clocks = <&aoss_qmp>; clock-names = "apb_pclk"; -- 2.7.4
-
Tao Zhang