Kernel-build-reports October 2013

kernel-build-reports@lists.linaro.org

8 participants
402 discussions

Start a nNew thread

linus/HEAD boot: 33 pass, 0 fail ([rerun] v3.12-rc3-313-g7dee8df)

by Kevin Hilman build bot

11 years, 2 months

linus/master boot: 29 pass, 4 fail (v3.12-rc3-313-g7dee8df)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-313-g7dee8df Commit: 7dee8dff47 Merge tag 'pm+acpi-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 17.3 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 29.9 sec omap3-beagle-xm PASS: 0 min 52.8 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 6.0 sec omap4-panda-es PASS: 1 min 10.8 sec omap3-tobi,3730storm PASS: 0 min 41.5 sec omap3-beagle PASS: 0 min 53.3 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.0 sec arm-multi_v7_defconfig ---------------------- ste-snowball FAIL: 0 min 38.6 sec tegra30-beaver PASS: 0 min 17.4 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 52.5 sec armada-370-mirabox PASS: 0 min 20.2 sec omap4-panda PASS: 1 min 1.3 sec omap4-panda-es PASS: 1 min 6.7 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 0.2 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 40.8 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.9 sec omap3-tobi,3730storm PASS: 0 min 43.5 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.9 sec omap3-beagle PASS: 0 min 48.8 sec arm-u8500_defconfig ------------------- ste-snowball FAIL: 0 min 38.6 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.2 sec arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 0.2 sec armada-370-mirabox PASS: 0 min 20.0 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.9 sec Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- After ENABLE_L2CC Flush boot issw code Before call normal U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 38.64 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: openblocks: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- After ENABLE_L2CC Flush boot issw code Before call normal U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 38.61 seconds. # PYBOOT: Result: FAIL arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: openblocks: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.18 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

queue boot: 6 passed 9 failed (queue/v3.10.14-52-gb97ced7)

by Olof's autobooter

arndale : passed 0:48.09 bbb : FAILED 1:09.41 beaver : passed 0:45.41 multi-beaver : FAILED 0:41.45 cubie : FAILED 0:14.16 cubie2 : FAILED 0:50.69 cubox : passed 0:49.45 panda : passed 1:04.09 multi-panda : FAILED 0:47.18 sama5 : passed 1:38.59 snowball : passed 1:42.41 multi-snowball : FAILED 0:43.66 multi-trimslice : FAILED 0:48.82 wandboard : FAILED 0:52.47 multi-wandboard : FAILED 0:45.51 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4203/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017864 (3d4ec8 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on un~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2099/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.7 MiB/s done Bytes transferred = 1819944 (1bc528 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.113 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1819944 (1bc528 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.113 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819944 (1bc528 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.140 serverip=172.16.1.7 bootfile=queue/v3.10.14-52-gb97ced7/uImage.multi-snowball autoboot=no Environment size: 1706/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.140 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819944 (1bc528 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819880 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.153 TrimSlice # setenv bootfile queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice setenv bootfile queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.153 serverip=172.16.1.7 bootfile=queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice autoboot=no Environment size: 376/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.153 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- mmcroot=/dev/mmcblk0p2 ro mmcrootfstype=ext4 rootwait netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi; netmask=255.255.255.0 script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2719/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.multi-256m'. Load address: 0x12000000 Loading: *##T ############################################################### ################################################################# ################################################################# ################################################################# ################################################################# ############################### 327.1 KiB/s done Bytes transferred = 1819944 (1bc528 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2712/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ###########T ###################################################### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################T ##################### ########################################## 369.1 KiB/s done Bytes transferred = 4203600 (402450 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.10.14-52-gb97ced7/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 11 warnings 0 failures (queue/v3.10.14-52-gb97ced7)

by Olof's autobuilder

11 years, 2 months

queue boot: 9 passed 6 failed (queue/v3.11.3-57-gf93b591)

by Olof's autobooter

arndale : passed 0:50.66 bbb : FAILED 1:12.85 beaver : passed 0:54.80 multi-beaver : passed 0:39.57 cubie : passed 0:52.09 cubie2 : FAILED 0:52.29 cubox : passed 0:48.68 panda : passed 0:51.85 multi-panda : passed 0:50.99 sama5 : passed 1:33.33 snowball : passed 1:20.97 multi-snowball : FAILED 1:00.59 multi-trimslice : FAILED 0:50.51 wandboard : FAILED 0:46.18 multi-wandboard : FAILED 0:40.96 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4202/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################T ########################### ################################################################# ################################################################# ################################################################# ################################################################# #################### 350.6 KiB/s done Bytes transferred = 4091152 (3e6d10 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2098/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.7 MiB/s done Bytes transferred = 3589440 (36c540 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1705/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.140 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-snowball'. Load address: 0x100000 Loading: *##############T ################################################### ################################################################# ################################################################# ################################################################# ###########################################T ###################### ################################################################# ################################################################T # ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3606162 (370692 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3606098 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 375/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.153 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-trimslice'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################T ##################### ####################################################### done Bytes transferred = 3605997 (3705ed hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605933 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-wandboard failure log: ------------------------------------------------- script=boot.scr serverip=172.16.1.7 uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2718/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-256m tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-256m Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.multi-256m'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 3.7 MiB/s done Bytes transferred = 3589440 (36c540 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- uimage=uImage update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2711/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################T ##### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################################################# 685.5 KiB/s done Bytes transferred = 4303152 (41a930 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.173 Filename '/srv/tftp/queue/v3.11.3-57-gf93b591/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 10 warnings 0 failures (queue/v3.11.3-57-gf93b591)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: f93b591 irq: Always define devm_{request_threaded,free}_irq() Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.3-57-gf93b591/ Runtime: 38m 18s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3574:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3660:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 2 months

linus/master boot: 27 pass, 6 fail (v3.12-rc3-304-g3dbecf0)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-304-g3dbecf0 Commit: 3dbecf0aa9 Merge tag 'xfs-for-linus-v3.12-rc4' of git://oss.sgi.com/xfs/xfs Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig exynos5250-arndale: FAIL: arm-exynos_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 17.2 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 29.8 sec omap3-beagle-xm PASS: 0 min 51.8 sec am335x-bone PASS: 0 min 26.4 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda PASS: 1 min 2.6 sec omap4-panda-es PASS: 1 min 22.5 sec omap3-tobi,3730storm PASS: 0 min 44.4 sec omap3-beagle PASS: 0 min 50.9 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 14.9 sec arm-multi_v7_defconfig ---------------------- ste-snowball FAIL: 0 min 38.6 sec tegra30-beaver PASS: 0 min 20.9 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 51.2 sec armada-370-mirabox PASS: 0 min 20.2 sec omap4-panda PASS: 0 min 58.6 sec omap4-panda-es PASS: 1 min 3.7 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 0.2 sec sun4i-a10-cubieboard FAIL: 0 min 6.8 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.6 sec omap3-tobi,3530overo PASS: 0 min 43.9 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.8 sec omap3-tobi,3730storm PASS: 0 min 43.7 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.7 sec omap3-beagle PASS: 0 min 49.1 sec arm-u8500_defconfig ------------------- ste-snowball FAIL: 0 min 38.7 sec arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 31.4 sec arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 0.2 sec armada-370-mirabox PASS: 0 min 20.0 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.5 sec Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- After ENABLE_L2CC Flush boot issw code Before call normal U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 38.64 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: openblocks: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 24 lines of boot log: ------------------------------------------------------ version U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 sunxi#setenv ethaddr 2e:40:70:f0:12:08 setenv ethaddr 2e:40:70:f0:12:08 sunxi#setenv console ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv console ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 sunxi#setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff sunxi#if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi sunxi#if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi sunxi#setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no sunxi#dhcp dhcp Unknown command 'dhcp' - try 'help' sunxi#~$off # PYBOOT: Exception: u-boot: does not support DHCP. Giving up. # PYBOOT: Time: 6.81 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 24 lines of boot log: ---------------------------------------------- After ENABLE_L2CC Flush boot issw code Before call normal U-Boot 2009.11 (sept. 19 2011 - 17:03:11) CPU: ST-Ericsson db8500 v2 (Dual ARM Cortex A9) 998.400 Mhz I2C: ready DRAM: 1 GB MMC: MCDE: startup failed sec_bridge: ISSWAPI_FLUSH_BOOT_CODE: 2 EMMC: 0, MMC: 1 In: serial Out: serial Err: serial Net: smc911x-0 Hit any key to stop autoboot: 1 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 38.67 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(arndale console)> hardreset (user:jenkins) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.45 seconds. # PYBOOT: Result: FAIL arm-mvebu_defconfig ------------------- armada-xp-openblocks-ax3-4: FAIL: last 24 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: openblocks: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.19 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

mainline boot: 15 passed 0 failed (mainline/v3.12-rc3-313-g7dee8df)

by Olof's autobooter

arndale : passed 0:47.44 bbb : passed 2:02.10 beaver : passed 0:55.38 multi-beaver : passed 0:31.10 cubie2 : passed 1:07.15 cubie : passed 1:08.53 cubox : passed 0:48.37 panda : passed 1:00.81 multi-panda : passed 0:49.92 sama5 : passed 1:39.50 snowball : passed 1:28.76 multi-snowball : passed 0:37.63 multi-trimslice : passed 0:34.59 wandboard : passed 0:52.97 multi-wandboard : passed 0:30.68 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig multi-wandboard : multi_v7_defconfig

11 years, 2 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc3-313-g7dee8df)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 7dee8df Merge tag 'pm+acpi-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc3-313-g7dee8df/ Runtime: 20m 43s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

linus/master boot: 24 pass, 5 fail (v3.12-rc3-296-g15c83d2)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-296-g15c83d2 Commit: 15c83d26e1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Failed boot tests (console logs at the end) =========================================== omap3-tobi,3530overo: FAIL: arm-omap2plus_defconfig omap3-tobi,3730storm: FAIL: arm-omap2plus_defconfig omap3-tobi,3530overo: FAIL: arm-multi_v7_defconfig omap3-tobi,3730storm: FAIL: arm-multi_v7_defconfig exynos5250-arndale: FAIL: arm-exynos_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 17.3 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 52.5 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo FAIL: 1 min 12.3 sec omap4-panda PASS: 1 min 7.0 sec omap4-panda-es PASS: 1 min 6.8 sec omap3-tobi,3730storm FAIL: 0 min 27.4 sec omap3-beagle PASS: 0 min 50.7 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 14.9 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 16.8 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 48.9 sec armada-370-mirabox PASS: 0 min 20.2 sec omap4-panda PASS: 1 min 0.8 sec omap4-panda-es PASS: 1 min 7.5 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.7 sec omap3-tobi,3530overo FAIL: 1 min 10.5 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.9 sec omap3-tobi,3730storm FAIL: 0 min 27.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.8 sec omap3-beagle PASS: 0 min 56.5 sec arm-exynos_defconfig -------------------- exynos5250-arndale FAIL: 0 min 31.4 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.9 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.7 sec Console logs for failures ========================= arm-omap2plus_defconfig ----------------------- omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ Ove before (last 100 chars): = 4153680 (3f6150 hex) Ove after: <class 'pexpect.TIMEOUT'> match: None match_index: None exitstatus: None flag_eof: False pid: 19066 child_fd: 3 closed: False timeout: 30 delimiter: <class 'pexpect.EOF'> logfile: <open file 'boot-omap3-tobi,3530overo.log', mode 'w' at 0x7f56f999ced0> logfile_read: None logfile_send: None maxread: 2000 ignorecase: False searchwindowsize: None delaybeforesend: 0.05 delayafterclose: 0.1 delayafterterminate: 0.1 # PYBOOT: Time: 72.28 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo #if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: autonegotiation timed out smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again smc911x: detected LAN9221 controller ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 27.36 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- omap3-tobi,3530overo: FAIL: last 24 lines of boot log: ------------------------------------------------------ / # uname -r uname -r 3.12.0-rc3-00296-g15c83d2 / # cat /proc/cpuinfo cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 3 (v7l) Features : swp half thumb fastmult vfp edsp neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x1 CPU part : 0xc08 CPU revision : 3 Hardware : Generic OMAP3 (Flattened Device Tree) Revision : 0000 Serial : 0000000000000000 / # ip -f inet -o addr ip -f inet -o addr 1: lo inet 127.0.0.1/8 scope host lo\ valid_lft forever preferred_lft forever /~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: ip -f inet -o addr. # PYBOOT: Time: 70.47 seconds. # PYBOOT: Result: FAIL omap3-tobi,3730storm: FAIL: last 24 lines of boot log: ------------------------------------------------------ setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}::::192.168.1.254:none' Overo # if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Overo # if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Overo # setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Overo # dhcp dhcp smc911x: detected LAN9221 controller smc911x: autonegotiation timed out smc911x: MAC 00:15:c9:28:f0:11 BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 Retry count exceeded; starting again smc911x: detected LAN9221 controller ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 27.36 seconds. # PYBOOT: Result: FAIL arm-exynos_defconfig -------------------- exynos5250-arndale: FAIL: last 24 lines of boot log: ---------------------------------------------------- Connected to arndale console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(arndale console)> hardreset (user:jenkins) Reboot arndale Reboot: arndale ; phidget 2 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.45 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

← Newer
1
...
34
35
36
37
38
39
40
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports October 2013