Kernel-build-reports October 2013

kernel-build-reports@lists.linaro.org

8 participants
402 discussions

queue boot: 6 passed 8 failed (queue/v3.10.14)

by Olof's autobooter

arndale : passed 0:48.94 bbb : FAILED 1:14.13 beaver : passed 0:35.63 multi-beaver : FAILED 0:41.46 cubie : FAILED 0:13.15 cubie2 : FAILED 0:53.73 cubox : passed 0:50.94 panda : passed 1:00.53 multi-panda : FAILED 0:46.79 sama5 : passed 1:46.58 snowball : passed 0:51.18 multi-snowball : FAILED 0:43.54 multi-trimslice : FAILED 0:42.61 wandboard : FAILED 0:50.76 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4191/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.10.14/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### 625 KiB/s done Bytes transferred = 4017880 (3d4ed8 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.10.14/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie failure log: ------------------------------------------------- io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler ../../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm:~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- netmask=255.255.255.0 panicarg=panic=10 partition=0:1 scriptaddr=0x44000000 serverip=172.16.1.4 setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2087/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/queue/v3.10.14/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# #########T ######################################################## ############################### 293.9 KiB/s done Bytes transferred = 1819896 (1bc4f8 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.14/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.14/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/queue/v3.10.14/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-beaver failure log: ------------------------------------------------- Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.112 Filename '/srv/tftp/queue/v3.10.14/uImage.multi-2g'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### 1.9 MiB/s done Bytes transferred = 1819896 (1bc4f8 hex) Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.14/tegra30-beaver.dtb tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.14/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.112 Filename '/srv/tftp/queue/v3.10.14/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 1.3 MiB/s done Bytes transferred = 16546 (40a2 hex) Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000 bootm 0x82000000 - 0x83000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819832 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK Starting kernel ... ~$off ======================================================================== Board multi-panda failure log: ------------------------------------------------- TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.14/uImage.multi-2g'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819896 (1bc4f8 hex) Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14/omap4-panda-es.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.14/omap4-panda-es.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.182 Filename '/srv/tftp/queue/v3.10.14/omap4-panda-es.dtb'. Load address: 0x81000000 Loading: *#### done Bytes transferred = 17271 (4377 hex) Panda # bootm 0x80000000 - 0x81000000 bootm 0x80000000 - 0x81000000 ## Booting kernel from Legacy Image at 80000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819832 Bytes = 1.7 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81000000 Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK OK reserving fdt memory region: addr=9d000000 size=3000000 Using Device Tree in place at 81000000, end 81007376 Starting kernel ... ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- ipaddr=172.16.1.139 serverip=172.16.1.7 bootfile=queue/v3.10.14/uImage.multi-snowball autoboot=no Environment size: 1694/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.139 Filename '/srv/tftp/queue/v3.10.14/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ############################### done Bytes transferred = 1819896 (1bc4f8 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1819832 Bytes = 1.7 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- DHCP client bound to address 172.16.1.152 TrimSlice # setenv bootfile queue/v3.10.14/uImage.multi-trimslice node: trimslice status: on setenv bootfile queue/v3.10.14/uImage.multi-trimslice TrimSlice # setenv autoboot no setenv autoboot no TrimSlice # printenv printenv bootdelay=5 baudrate=115200 loadaddr=0x408000 stdin=serial,usbkbd stdout=serial,lcd stderr=serial,lcd console=ttyS0,115200n8 ethact=RTL8169#0 gateway=172.16.1.1 bootcmd=none bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw autoload=no netmask=255.255.255.0 ipaddr=172.16.1.152 serverip=172.16.1.7 bootfile=queue/v3.10.14/uImage.multi-trimslice autoboot=no Environment size: 364/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.152 Filename '/srv/tftp/queue/v3.10.14/uImage.multi-trimslice'. Load address: 0x800000 Loading: * TFTP error: 'File not found' (1) Not retrying... TrimSlice # ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2700/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.14/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.10.14/uImage.imx'. Load address: 0x12000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##############################node: wandboard status: on T ################################### ################################################################# ################################################################# ################################################################# ################################################################# ########################################## 672.9 KiB/s done Bytes transferred = 4203544 (402418 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.14/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.10.14/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 12 warnings 0 failures (queue/v3.10.14)

by Olof's autobuilder

11 years, 2 months

linus/master boot: 29 pass, 0 fail (v3.12-rc3-70-g517bf8f)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-70-g517bf8f Commit: 517bf8fc21 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 19.5 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.5 sec omap4-panda PASS: 1 min 5.2 sec omap4-panda-es PASS: 1 min 8.8 sec omap3-tobi,3730storm PASS: 0 min 41.2 sec omap3-beagle PASS: 0 min 55.9 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 14.9 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 15.1 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 48.8 sec armada-370-mirabox PASS: 0 min 19.4 sec omap4-panda PASS: 0 min 59.3 sec omap4-panda-es PASS: 1 min 6.5 sec sun4i-a10-cubieboard PASS: 0 min 11.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 43.9 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.6 sec omap3-tobi,3730storm PASS: 0 min 40.6 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 53.8 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 30.0 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.3 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.4 sec

11 years, 2 months

mainline boot: 13 passed 1 failed (mainline/v3.12-rc3-186-gc31eeac)

by Olof's autobooter

arndale : passed 0:57.58 bbb : passed 1:46.03 beaver : passed 0:58.64 multi-beaver : passed 0:34.02 cubie2 : passed 1:07.52 cubie : passed 0:58.17 cubox : passed 0:47.91 panda : passed 1:00.20 multi-panda : passed 0:49.66 sama5 : passed 1:36.42 snowball : FAILED 2:03.54 multi-snowball : passed 0:40.50 multi-trimslice : passed 0:39.50 wandboard : passed 0:54.76 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig Last entries of failed logs below: ======================================================================== Board snowball failure log: ------------------------------------------------- [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read [WARN] mmcblk0rpmb: retrying using single block read root@snowball:~# ifconfig -a ifconfig -a eth0 Link encap:Ethernet HWaddr 08:00:08:1e:0f:44 inet addr:172.16.1.139 Bcast:172.16.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4923 (4.8 KiB) TX bytes:2480 (2.4 KiB) Interrupt:50 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@snowball:~# halt halt Broadcast message from root@snowball (ttyAMA2) (Tue Oct 1 22:11:00 2013): The system is going down for system halt NOW! INIT: Switching to runlevel: 0 INIT: Sending processes the TERM signal root@snowball:~# [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 0. [....] Stopping web server: apache2apache2: apr_sockaddr_info_get() failed for snowball apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName ... waiting [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Asking all remaining processes to terminate...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. ~$off

11 years, 2 months

mainline build: 16 warnings 0 failures (mainline/v3.12-rc3-186-gc31eeac)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: c31eeac Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.12-rc3-186-gc31eeac/ Runtime: 38m 43s Passed: 117 Failed: 0 Warnings: 16 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:579:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:593:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:603:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:930:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:960:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 5 net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Section mismatches:

11 years, 2 months

v3.11.3 boot: 24 pass, 1 fail (v3.11.3)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: v3.11.3 Git describe: v3.11.3 Commit: db203880b7 Linux 3.11.3 Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-multi_v7_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 16.4 sec arm-omap2plus_defconfig ----------------------- omap3-beagle-xm PASS: 0 min 51.9 sec am335x-bone PASS: 0 min 31.7 sec omap3-tobi,3530overo PASS: 0 min 42.7 sec omap4-panda PASS: 1 min 4.2 sec omap4-panda-es PASS: 1 min 10.2 sec omap3-tobi,3730storm PASS: 0 min 42.1 sec omap3-beagle PASS: 0 min 57.2 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.0 sec imx6dl-wandboard,wand-solo PASS: 0 min 15.9 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 15.3 sec omap3-beagle-xm PASS: 0 min 51.8 sec armada-370-mirabox FAIL: 0 min 18.5 sec am335x-bone PASS: 0 min 33.8 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec omap3-tobi,3530overo PASS: 0 min 44.3 sec omap4-panda PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 2.9 sec omap3-tobi,3730storm PASS: 0 min 40.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 57.0 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.9 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.3 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.2 sec Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- armada-370-mirabox: FAIL: last 24 lines of boot log: ---------------------------------------------------- [ 168.588191] TCP: cubic registered [ 168.591882] NET: Registered protocol family 10 [ 168.596785] sit: IPv6 over IPv4 tunneling driver [ 168.601846] Key type dns_resolver registered [ 168.606174] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 [ 168.613896] Registering SWP/SWPB emulation handler [ 168.619250] /work/kernel/jenkins/jobs/arm-stable-3.11/workspace/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 168.630584] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 168.638109] Please append a correct "root=" boot option; here are the available partitions: [ 168.646493] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 168.654775] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.3 #1 [ 168.660734] [<c001577c>] (unwind_backtrace+0x0/0xf8) from [<c001171c>] (show_stack+0x10/0x14) [ 168.669283] [<c001171c>] (show_stack+0x10/0x14) from [<c049cbb0>] (dump_stack+0x74/0x90) [ 168.677394] [<c049cbb0>] (dump_stack+0x74/0x90) from [<c049a05c>] (panic+0x90/0x1f0) [ 168.685159] [<c049a05c>] (panic+0x90/0x1f0) from [<c063d0b4>] (mount_block_root+0x184/0x230) [ 168.693616] [<c063d0b4>] (mount_block_root+0x184/0x230) from [<c063d254>] (mount_root+0xf4/0x114) [ 168.702507] [<c063d254>] (mount_root+0xf4/0x114) from [<c063d3a0>] (prepare_namespace+0x12c/0x190) [ 168.711486] [<c063d3a0>] (prepare_namespace+0x12c/0x190) from [<c063cd54>] (kernel_init_freeable+0x180/0x1c8) [ 168.721420] [<c063cd54>] (kernel_init_freeable+0x180/0x1c8) from [<c0497d0c>] (kernel_init+0x8/0xe4) [ 168.730572] [<c0497d0c>] (kernel_init+0x8/0xe4) from [<c000e3f8>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 18.50 seconds. # PYBOOT: Result: FAIL

11 years, 2 months

queue boot: 8 passed 5 failed (queue/v3.11.3)

by Olof's autobooter

arndale : passed 0:50.64 bbb : FAILED 1:12.36 beaver : passed 0:34.98 multi-beaver : passed 0:38.52 cubie2 : FAILED 0:49.05 cubie : passed 0:52.19 cubox : passed 0:48.59 panda : passed 0:57.85 multi-panda : passed 1:00.51 sama5 : passed 1:46.63 snowball : OFFLINE 0:30.54 multi-snowball : FAILED 0:55.30 multi-trimslice : FAILED 0:54.37 wandboard : FAILED 0:56.16 Board legend: Board : System SoC Defconfig arndale : InSignal ArndaleBoard Samsung Exynos 5250 exynos_defconfig bbb : BeagleBone Black TI Sitara AM3359 omap2plus_defconfig beaver : Nvidia Beaver Nvidia Tegra 30 tegra_defconfig multi-beaver : multi_v7_defconfig cubie : Cubieboard Allwinner A10 multi_v7_defconfig cubie2 : Cubieboard 2 Allwinner A20 multi_v7_defconfig cubox : SolidRun Cubox Marvell 88AP510 dove_defconfig multi-trimslice : CompuLab TrimSlice Nvidia Tegra 20 multi_v7_defconfig panda : TI PandaBoard ES TI OMAP4460 omap2plus_defconfig multi-panda : multi_v7_defconfig sama5 : Atmel SAMA5 devboard Atmel SAMA5D35 sama5_defconfig snowball : CALAO Snowball ST-Ericsson A9500 u8500_defconfig multi-snowball : multi_v7_defconfig wandboard : Wandboard Freescale i.MX6 Quad imx_v6_v7_defconfig Last entries of failed logs below: ======================================================================== Board bbb failure log: ------------------------------------------------- Environment size: 4190/131068 bytes U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp' U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.omap tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.omap link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.11.3/uImage.omap'. Load address: 0x80000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################### 619.1 KiB/s done Bytes transferred = 4090200 (3e6958 hex) U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.3/am335x-boneblack.dtb tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.11.3/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.4; our IP address is 172.16.1.126 Filename '/srv/tftp/queue/v3.11.3/am335x-boneblack.dtb'. Load address: 0x81000000 Loading: * TFTP error: 'File not found' (1) Not retrying... U-Boot# ~$off ======================================================================== Board cubie2 failure log: ------------------------------------------------- setargs=if test -z \\"$root\\"; then if test \\"$bootpath\\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs} stderr=serial stdin=serial stdout=serial Environment size: 2086/131068 bytes sun7i#printenv bootargs printenv bootargs bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-1g tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-1g Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/queue/v3.11.3/uImage.multi-1g'. Load address: 0x41000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #################################################### 1.6 MiB/s done Bytes transferred = 3589168 (36c430 hex) sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.3/sun7i-a20-cubieboard2.dtb tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.11.3/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.1.4; our IP address is 172.16.1.171 Filename '/srv/tftp/queue/v3.11.3/sun7i-a20-cubieboard2.dtb'. Load address: 0x42000000 Loading: * TFTP error: 'File not found' (1) Not retrying... sun7i#node: cubie2 status: on ~$off ======================================================================== Board multi-snowball failure log: ------------------------------------------------- Environment size: 1693/4092 bytes U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-snowball tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-snowball smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.139 Filename '/srv/tftp/queue/v3.11.3/uImage.multi-snowball'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #########################T ######################################## ################################################################# ################################################################# ################################################################# #############################################################T #### ####################################################### done Bytes transferred = 3605890 (370582 hex) U8500 $ bootm 0x100000 bootm 0x100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605826 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board multi-trimslice failure log: ------------------------------------------------- autoboot=no Environment size: 363/65532 bytes TrimSlice # printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-trimslice tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.multi-trimslice Using RTL8169#0 device TFTP from server 172.16.1.4; our IP address is 172.16.1.152 Filename '/srv/tftp/queue/v3.11.3/uImage.multi-trimslice'. Load address: 0x800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################T ############################# ################################################################# ################################################################# ################################################################# ################################################################# ####################################################### done Bytes transferred = 3605725 (3704dd hex) TrimSlice # bootm 0x800000 bootm 0x800000 ## Booting kernel from Legacy Image at 00800000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3605661 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off ======================================================================== Board wandboard failure log: ------------------------------------------------- update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi update_sd_firmware_filename=u-boot.imx Environment size: 2699/8188 bytes => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.imx tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.11.3/uImage.imx Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.11.3/uImage.imx'. Load address: 0x12000000 Loading: *#############################################################node: wandboard status: on T #### ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##########################T ####################################### ################################################################# #####T ############################################################ ################################################################# ################################################################# ############################################################# 260.7 KiB/s done Bytes transferred = 4303160 (41a938 hex) => tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3/imx6q-wandboard.dtb tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.11.3/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.4; our IP address is 172.16.1.172 Filename '/srv/tftp/queue/v3.11.3/imx6q-wandboard.dtb'. Load address: 0x14000000 Loading: * TFTP error: 'File not found' (1) Not retrying... => ~$off

11 years, 2 months

queue build: 10 warnings 0 failures (queue/v3.11.3)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: db20388 Linux 3.11.3 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.11.3/ Runtime: 39m 2s Passed: 119 Failed: 0 Warnings: 10 Section mismatches: 8 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat=] 1 drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/spi/spi-pl022.c:2197:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1134:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 4 drivers/usb/host/xhci.c:3589:17: warning: unused variable 'dev' [-Wunused-variable] 4 drivers/usb/host/xhci.c:3675:17: warning: unused variable 'dev' [-Wunused-variable] Section mismatches: 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5a7c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/built-in.o(.data+0x5aa4): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x4dc): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/built-in.o(.data+0x504): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x0): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: drivers/mmc/host/built-in.o(.data+0x28): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown) 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe43c): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the function .init.text:sdhci_bcm_kona_probe() 1 bcm_defconfig WARNING: vmlinux.o(.data+0xe464): Section mismatch in reference from the variable sdhci_bcm_kona_driver to the (unknown reference) .init.data:(unknown)

11 years, 2 months

linus/master boot: 29 pass, 0 fail (v3.12-rc3-65-gf927318)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-65-gf927318 Commit: f927318840 Merge tag 'nfs-for-3.12-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 18.0 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.0 sec omap3-beagle-xm PASS: 0 min 49.4 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.3 sec omap4-panda PASS: 1 min 7.0 sec omap4-panda-es PASS: 1 min 10.1 sec omap3-tobi,3730storm PASS: 0 min 41.1 sec omap3-beagle PASS: 0 min 52.0 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.3 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.3 sec imx6q-wandboard PASS: 0 min 15.1 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 15.2 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 48.6 sec armada-370-mirabox PASS: 0 min 19.5 sec omap4-panda PASS: 1 min 2.6 sec omap4-panda-es PASS: 1 min 5.6 sec sun4i-a10-cubieboard PASS: 0 min 11.6 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.4 sec omap3-tobi,3530overo PASS: 0 min 41.1 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 40.4 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec omap3-beagle PASS: 0 min 53.7 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 30.6 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.3 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.2 sec

11 years, 2 months

linus/master boot: 29 pass, 0 fail (v3.12-rc3-59-g522d6d3)

by Kevin Hilman build bot

Automated DT boot report for various ARM defconfigs. Boot test simply checks if kernel can boot to initramfs with busybox and run some basic commands (e.g. 'cat /proc/cpuinfo'). Tree/Branch: linus/master Git describe: v3.12-rc3-59-g522d6d3 Commit: 522d6d38f8 Merge branch 'akpm' (fixes from Andrew Morton) Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver PASS: 0 min 17.9 sec arm-omap2plus_defconfig ----------------------- am335x-boneblack PASS: 0 min 30.3 sec omap3-beagle-xm PASS: 0 min 51.6 sec am335x-bone PASS: 0 min 26.3 sec omap3-tobi,3530overo PASS: 0 min 42.4 sec omap4-panda PASS: 1 min 3.8 sec omap4-panda-es PASS: 1 min 15.0 sec omap3-tobi,3730storm PASS: 0 min 41.1 sec omap3-beagle PASS: 0 min 49.2 sec arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual PASS: 0 min 16.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.2 sec imx6q-wandboard PASS: 0 min 15.1 sec arm-multi_v7_defconfig ---------------------- tegra30-beaver PASS: 0 min 15.1 sec am335x-boneblack PASS: 0 min 34.6 sec omap3-beagle-xm PASS: 0 min 49.9 sec armada-370-mirabox PASS: 0 min 19.4 sec omap4-panda PASS: 1 min 1.8 sec omap4-panda-es PASS: 1 min 5.6 sec sun4i-a10-cubieboard PASS: 0 min 14.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 16.5 sec omap3-tobi,3530overo PASS: 0 min 44.0 sec am335x-bone PASS: 0 min 33.4 sec imx6q-wandboard PASS: 0 min 15.7 sec omap3-tobi,3730storm PASS: 0 min 39.9 sec imx6dl-wandboard,wand-dual PASS: 0 min 16.6 sec omap3-beagle PASS: 0 min 54.1 sec arm-exynos_defconfig -------------------- exynos5250-arndale PASS: 0 min 29.8 sec arm-mvebu_defconfig ------------------- armada-370-mirabox PASS: 0 min 19.3 sec arm-sama5_defconfig ------------------- sama5d35ek PASS: 0 min 18.4 sec

11 years, 2 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports October 2013