Kernel-build-reports February 2014

kernel-build-reports@lists.linaro.org

9 participants
404 discussions

next build: 13 warnings 0 failures (next/next-20140206)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 0cc2aa5 Add linux-next specific files for 20140206 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140206/ Runtime: 41m 48s Passed: 123 Failed: 0 Warnings: 13 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/staging/imx-drm/imx-drm-core.c:87:25: warning: unused variable 'imxdrm' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

mainline boot: 31 passed 0 failed (mainline/v3.14-rc1-54-gef42c58)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.09 arndale exynos_defconfig : passed 1:07.20 bbb omap2plus_defconfig : passed 1:36.27 bbb multi_v7_defconfig : passed 1:22.78 beaver tegra_defconfig : passed 0:51.46 beaver multi_v7_defconfig : passed 0:48.57 capri bcm_defconfig : passed 0:42.78 capri multi_v7_defconfig : passed 0:44.46 cubie sunxi_defconfig : passed 0:53.25 cubie multi_v7_defconfig : passed 0:58.20 cubie2 sunxi_defconfig : passed 0:52.02 cubie2 multi_v7_defconfig : passed 0:56.68 cubie2 multi_lpae_defconfig : passed 0:54.37 cubox dove_defconfig : warnings 1:10.76 dalmore tegra_defconfig : passed 1:23.31 dalmore multi_v7_defconfig : passed 1:20.80 dalmore multi_lpae_defconfig : passed 1:15.65 hummingboard imx_v6_v7_defconfig : passed 1:22.77 hummingboard multi_v7_defconfig : passed 1:06.61 panda omap2plus_defconfig : passed 1:15.18 panda multi_v7_defconfig : passed 1:20.85 sama5 sama5_defconfig : passed 1:54.43 seaboard tegra_defconfig : passed 1:00.71 seaboard multi_v7_defconfig : passed 1:07.65 snow exynos_defconfig : passed 1:23.54 snowball u8500_defconfig : passed 1:27.65 snowball multi_v7_defconfig : passed 2:07.30 trimslice tegra_defconfig : passed 1:20.59 trimslice multi_v7_defconfig : passed 1:04.33 wandboard imx_v6_v7_defconfig : passed 0:56.61 wandboard multi_v7_defconfig : passed 0:59.51 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 8 months

mainline build: 12 warnings 0 failures (mainline/v3.14-rc1-54-gef42c58)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: ef42c58 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc1-54-gef42c58/ Runtime: 42m 55s Passed: 123 Failed: 0 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

mainline boot: 29 pass, 7 fail (v3.14-rc1-15-gf8f2023)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: mainline Git describe: v3.14-rc1-15-gf8f2023 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 54.9 sec omap4-panda PASS: 1 min 4.9 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm FAIL: 0 min 31.4 sec omap4-panda-es PASS: 1 min 7.3 sec multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 42.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec sun4i-a10-cubieboard PASS: 0 min 12.8 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.0 sec tegra30-beaver PASS: 0 min 20.1 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 50.6 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda FAIL: 1 min 45.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.9 sec sun4i-a10-cubieboard PASS: 0 min 18.8 sec bcm28155-ap PASS: 1 min 14.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 44.9 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 54.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec u8500_defconfig --------------- ste-snowball PASS: 0 min 33.9 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.2 sec Console logs for failures ========================= omap2plus_defconfig ------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Reboot: omap5uevm ; phidget 1 2 : off, sleep, on Connected. Disconnected. 0 mmc0 is current device SD/MMC found on device 0 reading uEnv.txt ** Unable to read file uEnv.txt ** ** File not found /boot/zImage ** mmc1(part 0) is current device found: 002/099 2 SD/MMC found on device 1 ** Unrecognized filesystem type ** ** No partition table - mmc 1 ** U-Boot# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL sunxi_defconfig --------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL omap4-panda: FAIL: last 80 lines of boot log: --------------------------------------------- [ 1.411132] usbcore: registered new interface driver asix [ 1.416870] usbcore: registered new interface driver ax88179_178a [ 1.423309] usbcore: registered new interface driver cdc_ether [ 1.429473] usbcore: registered new interface driver r815x [ 1.435302] usbcore: registered new interface driver smsc75xx [ 1.441406] usbcore: registered new interface driver smsc95xx [ 1.447479] usbcore: registered new interface driver net1080 [ 1.453460] usbcore: registered new interface driver cdc_subset [ 1.459716] usbcore: registered new interface driver zaurus [ 1.465667] usbcore: registered new interface driver cdc_ncm [ 1.471618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.478485] ehci-pci: EHCI PCI platform driver [ 1.483184] ehci-platform: EHCI generic platform driver [ 1.488830] ehci-omap: OMAP-EHCI Host Controller driver [ 1.514617] unable to find transceiver [ 1.518554] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.524261] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.532653] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.552642] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.559692] hub 1-0:1.0: USB hub found [ 1.563659] hub 1-0:1.0: 3 ports detected [ 1.568420] ehci-orion: EHCI orion driver [ 1.572875] SPEAr-ehci: EHCI SPEAr driver [ 1.577209] tegra-ehci: Tegra EHCI driver [ 1.582122] usbcore: registered new interface driver usb-storage [ 1.590179] mousedev: PS/2 mouse device common for all mice [ 1.598297] i2c /dev entries driver [ 1.604217] sdhci: Secure Digital Host Controller Interface driver [ 1.610717] sdhci: Copyright(c) Pierre Ossman [ 1.616119] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.622039] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.629821] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.635742] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.643615] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.650390] usbcore: registered new interface driver usbhid [ 1.656249] usbhid: USB HID core driver [ 1.664367] TCP: cubic registered [ 1.667846] NET: Registered protocol family 17 [ 1.672760] Key type dns_resolver registered [ 1.677886] Power Management for TI OMAP4+ devices. [ 1.683074] Power Management for TI OMAP4. [ 1.687347] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.694488] Registering SWP/SWPB emulation handler [ 1.700714] vwl1271: 1800 mV [ 1.708496] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.718872] twl 0-0048: PIH (irq 39) nested IRQs [ 1.725463] twl_rtc rtc.10: Enabling TWL-RTC [ 1.732543] twl_rtc rtc.10: rtc core: registered rtc.10 as rtc0 [ 1.739501] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV [ 1.745605] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.751739] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.757843] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.763397] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.768890] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.774383] VDAC: 1800 mV [ 1.774383] VANA: 2100 mV [ 1.781280] VCXIO: 1800 mV [ 1.784667] VUSB: 3300 mV [ 1.788208] V1V8: 1800 mV [ 1.791809] V2V1: 2100 mV [ 1.912902] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.042999] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 2.050872] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 2.061798] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 2.069580] hub 1-1:1.0: USB hub found [ 2.073791] hub 1-1:1.0: 5 ports detected [ 2.078582] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 2.085540] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.094177] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.143402] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.203338] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.213958] mmc0: new high speed SD card at address f3c2 [ 2.220001] isa bounce pool size: 16 pages [ 2.224487] mmcblk0: mmc0:f3c2 SD02G 1.84 GiB [ 2.231079] mmcblk0: p1 p2 [ 10.618011] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.26 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ [ 0.434891] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.456147] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.189253] console [ttyS0] enabled [ 1.213261] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222471] Serial: IMX driver [ 1.225741] STMicroelectronics ASC driver initialized [ 1.231158] serial: Freescale lpuart driver [ 1.235448] [drm] Initialized drm 1.1.0 20060810 [ 1.243040] loop: module loaded [ 1.246685] sata_mv d00a0000.sata: version 1.28 [ 1.251290] sata_mv d00a0000.sata: unable to find phy [ 1.256362] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264492] pgd = c0004000 [ 1.267215] [00000054] *pgd=00000000 [ 1.270812] Internal error: Oops: 5 [#1] SMP ARM [ 1.275438] Modules linked in: [ 1.278512] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00015-gf8f2023 #1 [ 1.286100] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291521] PC is at __clk_put+0x1c/0x8c [ 1.295453] LR is at clk_prepare_lock+0x10/0xfc [ 1.299996] pc : [<c0493378>] lr : [<c0490a24>] psr: 60000113 [ 1.299996] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311502] r10: ed3a3190 r9 : ed0d3c00 r8 : 00000004 [ 1.316740] r7 : ffffffed r6 : 00000000 r5 : ed276010 r4 : 00000000 [ 1.323282] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329826] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.337153] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342912] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348933] Stack: (0xed059e10 to 0xed05a000) [ 1.353301] 9e00: 00000001 c036174c c085a730 000000df [ 1.361501] 9e20: ed0ce1b0 00000002 c0608df4 00000000 74726f70 ed0c0030 00000001 ed3a2ab0 [ 1.369701] 9e40: 000000df ed0d3c10 c091caf8 00000000 c091caf8 c085a730 000000df ed058030 [ 1.377900] 9e60: 00000000 c0304c28 c0304c10 ed0d3c10 c0985c8c c0303484 00000000 ed0d3c10 [ 1.386100] 9e80: c091caf8 ed0d3c44 00000000 c0303670 00000000 c091caf8 c03035e4 c0301a9c [ 1.394299] 9ea0: ed03b85c ed09a934 c091caf8 ed3a3100 c0916eb8 c0302c4c c0776adc c094b6c0 [ 1.402499] 9ec0: c091caf8 c091caf8 00000006 c094b6c0 c094b6c0 c0303c74 00000000 c089f18c [ 1.410699] 9ee0: 00000006 c085a760 c089f18c c0008bbc ed003c00 c072b1d4 ed0c7380 c05a4da0 [ 1.418898] 9f00: 00000000 c094b6c0 c082150c c012dab4 00000000 c08e63d8 60000113 00000001 [ 1.427097] 9f20: ee7ffe1b c05b45b8 000000df c005d48c c07ebf00 00000006 ee7ffe26 00000006 [ 1.435297] 9f40: c08e63c8 c089f18c 00000006 c094b6c0 c094b6c0 c082150c 000000df c08818c4 [ 1.443496] 9f60: c08818b8 c0821c48 00000006 00000006 c082150c 88855891 15413389 b850a414 [ 1.451696] 9f80: 15a08542 00000000 c0593ac4 00000000 00000000 00000000 00000000 00000000 [ 1.459895] 9fa0: 00000000 c0593acc 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.468094] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.476293] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9441725 254484d0 [ 1.484502] [<c0493378>] (__clk_put) from [<c036174c>] (mv_platform_probe+0x2c0/0x43c) [ 1.492446] [<c036174c>] (mv_platform_probe) from [<c0304c28>] (platform_drv_probe+0x18/0x48) [ 1.500996] [<c0304c28>] (platform_drv_probe) from [<c0303484>] (driver_probe_device+0x124/0x240) [ 1.509894] [<c0303484>] (driver_probe_device) from [<c0303670>] (__driver_attach+0x8c/0x90) [ 1.518356] [<c0303670>] (__driver_attach) from [<c0301a9c>] (bus_for_each_dev+0x60/0x94) [ 1.526556] [<c0301a9c>] (bus_for_each_dev) from [<c0302c4c>] (bus_add_driver+0x148/0x1f0) [ 1.534844] [<c0302c4c>] (bus_add_driver) from [<c0303c74>] (driver_register+0x78/0xf8) [ 1.542872] [<c0303c74>] (driver_register) from [<c085a760>] (mv_init+0x30/0x50) [ 1.550290] [<c085a760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557798] [<c0008bbc>] (do_one_initcall) from [<c0821c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566522] [<c0821c48>] (kernel_init_freeable) from [<c0593acc>] (kernel_init+0x8/0xf0) [ 1.574638] [<c0593acc>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.582229] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588370] ---[ end trace 27673af75423710d ]--- [ 1.593009] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.593009] [ 1.602169] CPU0: stopping [ 1.604887] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc1-00015-gf8f2023 #1 [ 1.613444] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.621213] [<c001143c>] (show_stack) from [<c0599638>] (dump_stack+0x84/0x94) [ 1.628457] [<c0599638>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635874] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x114) [ 1.644423] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652793] Exception stack(0xc08a3f68 to 0xc08a3fb0) [ 1.657859] 3f60: ffffffed 2d736000 c08ab4e4 00000000 c08aa4cc c08a2000 [ 1.666059] 3f80: c08aa450 c094b54b c05a4128 c08a2000 c094b54b c08a2000 00000000 c08a3fb0 [ 1.674257] 3fa0: c000f158 c0081194 60000113 ffffffff [ 1.679327] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.687269] [<c0081194>] (cpu_startup_entry) from [<c0821b00>] (start_kernel+0x358/0x364) [ 1.695468] [<c0821b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 22.92 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00015-gf8f2023 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9148>] lr : [<c02c67f4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee320290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff65c ee910e10 c00ff7b4 c04e183c 0000001f de20: ee910e10 00000002 c03c2d80 00000000 74726f70 ee910030 00000001 ee32fca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e183c 00000086 ee83c030 de60: 00000000 c01c9958 c01c9940 c0551d48 ee90b210 c01c80e0 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c8360 00000000 c0519090 c01c82c8 c01c67d8 dea0: ee85a7dc ee85e1b4 c0519090 ee320300 c05180c0 c01c7988 c046b580 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c89a4 00000000 c04f6464 dee0: 00000006 c04e186c c04f6464 c00088bc ee804c80 c044e404 ee85ee00 c03ac4f8 df00: 00000000 c052edc0 0000d50c c00f6020 00000000 c0507b80 60000113 00000001 df20: ef7fce1b c03bc820 00000086 c0035e20 c04abd54 00000006 ef7fce26 00000006 df40: c0507b70 c04f6464 00000006 c052edc0 c052edc0 c04cd50c 00000086 c04efb14 df60: c04efb08 c04cdc40 00000006 00000006 c04cd50c d456f45d 0fbbed6f 47affddf df80: f9ff7bce 00000000 c03a05b4 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a05bc 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd3f [<c02c9148>] (__clk_put) from [<c01ff65c>] (mv_platform_probe+0x2ac/0x414) [<c01ff65c>] (mv_platform_probe) from [<c01c9958>] (platform_drv_probe+0x18/0x48) [<c01c9958>] (platform_drv_probe) from [<c01c80e0>] (really_probe+0x80/0x214) [<c01c80e0>] (really_probe) from [<c01c8360>] (__driver_attach+0x98/0x9c) [<c01c8360>] (__driver_attach) from [<c01c67d8>] (bus_for_each_dev+0x60/0x94) [<c01c67d8>] (bus_for_each_dev) from [<c01c7988>] (bus_add_driver+0x148/0x1f0) [<c01c7988>] (bus_add_driver) from [<c01c89a4>] (driver_register+0x78/0xf8) [<c01c89a4>] (driver_register) from [<c04e186c>] (mv_init+0x30/0x50) [<c04e186c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cdc40>] (kernel_init_freeable+0x138/0x1d8) [<c04cdc40>] (kernel_init_freeable) from [<c03a05bc>] (kernel_init+0x8/0xf0) [<c03a05bc>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 1dcbdf1437771127 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc1-00015-gf8f2023 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a4db4>] (dump_stack+0x80/0x90) [<c03a4db4>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000934 00000000 ee876000 c05024ac c03ab9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054 # PYBOOT: Time: 20.38 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

mainline boot: 30 passed 0 failed (mainline/v3.14-rc1-15-gf8f2023)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:20.22 arndale exynos_defconfig : passed 1:08.13 bbb omap2plus_defconfig : passed 1:37.06 bbb multi_v7_defconfig : passed 1:21.98 beaver tegra_defconfig : passed 0:56.07 beaver multi_v7_defconfig : passed 0:52.78 capri bcm_defconfig : passed 0:43.21 capri multi_v7_defconfig : passed 0:44.25 cubie sunxi_defconfig : passed 0:51.32 cubie multi_v7_defconfig : passed 0:52.45 cubie2 sunxi_defconfig : passed 0:51.17 cubie2 multi_v7_defconfig : passed 0:57.82 cubie2 multi_lpae_defconfig : passed 0:50.70 cubox dove_defconfig : warnings 1:09.85 dalmore multi_v7_defconfig : passed 1:19.94 dalmore multi_lpae_defconfig : passed 1:16.35 hummingboard imx_v6_v7_defconfig : passed 1:26.24 hummingboard multi_v7_defconfig : passed 1:04.17 panda omap2plus_defconfig : passed 1:16.00 panda multi_v7_defconfig : passed 1:19.19 sama5 sama5_defconfig : passed 1:50.98 seaboard tegra_defconfig : passed 1:02.96 seaboard multi_v7_defconfig : passed 1:09.72 snow exynos_defconfig : passed 1:23.62 snowball u8500_defconfig : passed 1:32.68 snowball multi_v7_defconfig : passed 2:05.59 trimslice tegra_defconfig : passed 1:03.67 trimslice multi_v7_defconfig : passed 0:58.63 wandboard imx_v6_v7_defconfig : passed 0:57.95 wandboard multi_v7_defconfig : passed 1:00.72 Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 8 months

mainline build: 12 warnings 0 failures (mainline/v3.14-rc1-15-gf8f2023)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: f8f2023 x86: Disable CONFIG_X86_DECODER_SELFTEST in allmod/allyesconfigs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.14-rc1-15-gf8f2023/ Runtime: 42m 40s Passed: 123 Failed: 0 Warnings: 12 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:203:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:211:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 buildall.arm.multi_lpae_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) 2 buildall.arm.multi_v7_defconfig.log.passed:warning: (ARM_HIGHBANK_CPUFREQ) selects GENERIC_CPUFREQ_CPU0 which has unmet direct dependencies (ARCH_HAS_CPUFREQ && CPU_FREQ && HAVE_CLK && REGULATOR && OF && THERMAL && CPU_THERMAL) Section mismatches:

10 years, 8 months

queue boot: 13 pass, 3 fail (v3.10.28-103-gb8951dc)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.10.28-103-gb8951dc Failed boot tests (console logs at the end) =========================================== armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig sun4i-a10-cubieboard: FAIL: multi_v7_defconfig Full Report =========== omap2plus_defconfig ------------------- omap3-beagle-xm PASS: 0 min 53.3 sec am335x-bone PASS: 0 min 26.3 sec omap4-panda PASS: 1 min 16.0 sec omap4-panda-es PASS: 1 min 8.3 sec omap3-tobi,3730storm PASS: 0 min 36.3 sec omap3-tobi,3530overo PASS: 0 min 33.5 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.8 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.1 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.4 sec armada-370-mirabox PASS: 0 min 19.6 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.1 sec multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4 FAIL: 0 min 20.0 sec armada-370-mirabox FAIL: 0 min 18.0 sec sun4i-a10-cubieboard FAIL: 1 min 13.4 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec Console logs for failures ========================= multi_v7_defconfig ------------------ armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-xp-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 18) is a 16550A sata_mv d00a0000.sata: slots 32 ports 2 scsi0 : sata_mv scsi1 : sata_mv ata1: SATA max UDMA/133 irq 24 ata2: SATA max UDMA/133 irq 24 usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) ata1: SATA link down (SStatus 0 SControl F300) ata2: SATA link down (SStatus 0 SControl F300) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00103-gb8951dc #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275ee0>] (panic+0xa0/0x1e8) [<c0275ee0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271c50>] (kernel_init+0x8/0x158) [<c0271c50>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.28-00103-gb8951dc #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c001236c>] (handle_IPI+0x108/0x130) [<c001236c>] (handle_IPI+0x108/0x130) from [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) [<c000851c>] (armada_370_xp_handle_irq+0x90/0xa8) from [<c000dac0>] (__irq_svc+0x40/0x50) Exception stack(0xc0359f70 to 0xc0359fb8) 9f60: c1d5c6d8 00000000 000000c2 000000c2 9f80: c03604a8 c0358000 c036045c c0383c6c c027dec0 c0358000 c0383c6c c0358000 9fa0: 0000001f c0359fb8 c000f070 c004f990 60000113 ffffffff [<c000dac0>] (__irq_svc+0x40/0x50) from [<c004f990>] (cpu_startup_entry+0xfc/0x140) [<c004f990>] (cpu_startup_entry+0xfc/0x140) from [<c0328a3c>] (start_kernel+0x2c4/0x2d0) [<c0328a3c>] (start_kernel+0x2c4/0x2d0) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 20.04 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027b880 - 0xc027b8d8 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (1196.85 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ70, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ103, assuming pre-allocated Initializing Coherency fabric Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switching to clocksource armada_370_xp_clocksource Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) armada-370-pinctrl d0018000.pinctrl: registered pinctrl driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 17) is a 16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00103-gb8951dc #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275ee0>] (panic+0xa0/0x1e8) [<c0275ee0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271c50>] (kernel_init+0x8/0x158) [<c0271c50>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 18.00 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 80 lines of boot log: ------------------------------------------------------ pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc0327a9c (3199 kB) .init : 0xc0328000 - 0xc0356780 ( 186 kB) .data : 0xc0358000 - 0xc0383d20 ( 176 kB) .bss : 0xc0383d20 - 0xc03b68a8 ( 203 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. NR_IRQS:16 nr_irqs:16 16 sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms Console: colour dummy device 80x30 Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket -1, mpidr 0 Setting up static identity map for 0xc027b880 - 0xc027b8d8 unable to find compatible sirf rstc node in dtb Brought up 1 CPUs SMP: Total of 1 processors activated (669.28 BogoMIPS). CPU: All CPU(s) started in SVC mode. pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations unable to find compatible sirf pwrc node in dtb Serial: AMBA PL011 UART driver bio: create slab <bio-0> at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 bounce pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver ipmi message handler version 39.2 IPMI System Interface driver. ipmi_si: Adding default-specified kcs state machine ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2> Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 73.44 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

queue boot: 9 passed 1 failed (queue/v3.10.28-103-gb8951dc)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:23.51 Successful boards: arndale exynos_defconfig : passed 1:02.02 beaver tegra_defconfig : passed 0:45.25 cubox dove_defconfig : passed 0:51.69 dalmore tegra_defconfig : passed 1:06.63 panda omap2plus_defconfig : passed 1:14.62 sama5 sama5_defconfig : passed 1:52.96 seaboard tegra_defconfig : passed 0:51.73 snow exynos_defconfig : passed 1:26.50 trimslice tegra_defconfig : passed 0:53.78 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.28-00103-gb8951dc #1 [<c0013bec>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c0275ee0>] (panic+0xa0/0x1e8) [<c0275ee0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0271c50>] (kernel_init+0x8/0x158) [<c0271c50>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

10 years, 8 months

queue build: 23 warnings 0 failures (queue/v3.10.28-103-gb8951dc)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: b8951dc x86, cpu, amd: Add workaround for family 16h, erratum 793 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.10.28-103-gb8951dc/ Runtime: 32m 6s Passed: 121 Failed: 0 Warnings: 23 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-pxa/em-x270.c:480:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:484:18: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 arch/arm/mach-pxa/em-x270.c:603:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] 1 drivers/gpio/gpio-omap.c:1529:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] 1 drivers/spi/spi-pl022.c:2226:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 drivers/video/backlight/max8925_bl.c:124:41: warning: statement with no effect [-Wunused-value] 1 include/linux/clocksource.h:345:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:603:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 1 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] 4 arch/arm/mm/init.c:731:2: warning: passing argument 2 of 'free_reserved_area' makes integer from pointer without a cast [enabled by default] Section mismatches:

10 years, 8 months

queue boot: 29 pass, 6 fail (v3.12.9-132-g3c09ba2)

by Kevin's boot bot

Automated DT boot report for various ARM defconfigs. Tree/Branch: queue Git describe: v3.12.9-132-g3c09ba2 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig armada-370-mirabox: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig ste-snowball: FAIL: u8500_defconfig armada-370-mirabox: FAIL: mvebu_defconfig Full Report =========== omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.1 sec omap3-beagle-xm PASS: 0 min 57.6 sec am335x-bone PASS: 0 min 26.6 sec omap4-panda PASS: 1 min 1.4 sec omap4-panda-es PASS: 1 min 9.0 sec omap3-tobi,3730storm PASS: 0 min 21.1 sec omap3-tobi,3530overo PASS: 0 min 22.3 sec multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec tegra_defconfig --------------- tegra30-beaver PASS: 0 min 16.9 sec imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.9 sec imx6q-wandboard PASS: 0 min 16.3 sec bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.6 sec multi_v7_defconfig ------------------ ste-snowball PASS: 0 min 25.6 sec tegra30-beaver PASS: 0 min 16.9 sec am335x-boneblack PASS: 0 min 32.1 sec omap3-beagle-xm PASS: 1 min 2.2 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox FAIL: 0 min 28.7 sec omap4-panda PASS: 1 min 4.4 sec omap4-panda-es PASS: 1 min 8.5 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 30.2 sec sun4i-a10-cubieboard PASS: 0 min 16.5 sec bcm28155-ap PASS: 1 min 15.4 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.1 sec am335x-bone PASS: 0 min 33.9 sec imx6q-wandboard PASS: 0 min 16.4 sec omap3-tobi,3730storm PASS: 0 min 20.0 sec imx6dl-wandboard,wand-dual PASS: 0 min 17.0 sec omap3-tobi,3530overo PASS: 0 min 20.5 sec u8500_defconfig --------------- ste-snowball FAIL: 0 min 31.6 sec sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.3 sec mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.9 sec armada-370-mirabox FAIL: 0 min 27.8 sec Console logs for failures ========================= multi_lpae_defconfig -------------------- sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL multi_v7_defconfig ------------------ sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: ------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>>if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>dhcp > dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>>setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>> tftp 0x02000000 192.168.1.2:tmp/mirabox-335Tl0/tmpfNK257-uImage tftp 0x02000000 192.168.1.2:tmp/mirabox-335Tl0/tmpfNK257-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-335Tl0/tmpfNK257-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################# done Bytes transferred = 3575749 (368fc5 hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) Marvell>>printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-05 10:36:17 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3575685 Bytes = 3.4 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 28.69 seconds. # PYBOOT: Result: FAIL armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------ Net: egiga0, egiga1, egiga2, egiga3 Hit any key to stop autoboot: 1 0 openblocks> openblocks> version version U-Boot 2011.12 (Aug 26 2013 - 13:08:34) Plat'Home version: 2.0.7 (Marvell version: 2012_Q4.0p17) arm-marvell-linux-gnueabi-gcc (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 4.6.4 20120731 (prerelease) GNU ld (Linaro GCC branch-4.6.4. Marvell GCC 201301-1645.aee66e26) 2.22.0.20120801 openblocks> setenv bootargs console=ttyS0,115200 debug earlyprintk setenv bootargs console=ttyS0,115200 debug earlyprintk openblocks> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi openblocks> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi openblocks> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no openblocks> dhcp dhcp BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.158 openblocks> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 openblocks> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi openblocks> tftp 0x02000000 192.168.1.2:tmp/obsax3-ebgblD/tmpFO9gEB-uImage tftp 0x02000000 192.168.1.2:tmp/obsax3-ebgblD/tmpFO9gEB-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'tmp/obsax3-ebgblD/tmpFO9gEB-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################# done Bytes transferred = 3580684 (36a30c hex) openblocks> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.158 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) openblocks>printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk openblocks> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-05 10:39:26 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3580620 Bytes = 3.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 KiB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 30.16 seconds. # PYBOOT: Result: FAIL u8500_defconfig --------------- ste-snowball: FAIL: last 80 lines of boot log: ---------------------------------------------- Connected to snowball console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(snowball console)> hardreset (user:khilman) Reboot snowball Reboot: snowball ; ip9258 2 2 : ('off', 6, 'on') , sleep 6, 0 U8500 $ ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.56 seconds. # PYBOOT: Result: FAIL mvebu_defconfig --------------- armada-370-mirabox: FAIL: last 80 lines of boot log: ---------------------------------------------------- phy16= 72 phy16= 72 MMC: MRVL_MMC: 0 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3 0 Marvell>> Marvell>> version version U-Boot 2009.08 (Sep 16 2012 - 22:50:06)Marvell version: 1.1.2 NQ Marvell>setenv bootargs console=ttyS0,115200 debug earlyprintk > setenv bootargs console=ttyS0,115200 debug earlyprintk Marvell>> setenv initrd_high 0xffffffff setenv initrd_high 0xffffffff Marvell>> if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi Marvell>> if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi Marvell>> setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no Marvell>> dhcp dhcp phyaddr= 0 BOOTP broadcast 1 DHCP client bound to address 192.168.1.183 Marvell>> setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 Marvell>> if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi Marvell>tftp 0x02000000 192.168.1.2:tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage > tftp 0x02000000 192.168.1.2:tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'tmp/mirabox-osAD4Y/tmpgwKYxQ-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################### done Bytes transferred = 2653389 (287ccd hex) Marvell>> tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x03000000 192.168.1.2:buildroot.cpio.gz.uboot Using egiga0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.183 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x3000000 Loading: *############################################ done Bytes transferred = 639808 (9c340 hex) Marvell>>printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 debug earlyprintk Marvell>> bootm 0x02000000 0x03000000 bootm 0x02000000 0x03000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2014-02-05 10:52:04 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2653325 Bytes = 2.5 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 03000000 ... Image Name: Created: 2013-09-07 5:02:12 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 639744 Bytes = 624.8 kB Load Address: 81000000 Entry Point: 81000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 27.84 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

← Newer
1
...
31
32
33
34
35
36
37
...
41
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports February 2014