Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

arm-soc boot: 30 passed 1 failed (arm-soc/v3.15-rc5-736-gd6393d5)

by Olof's autobooter

Failed boards: snowball multi_v7_defconfig : FAILED 1:13.14 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.23 arndale exynos_defconfig : passed 1:04.89 bbb omap2plus_defconfig : passed 1:36.46 bbb multi_v7_defconfig : passed 1:27.31 beaver tegra_defconfig : passed 1:15.40 beaver multi_v7_defconfig : passed 0:51.08 capri bcm_defconfig : passed 0:44.36 capri multi_v7_defconfig : passed 0:46.10 cubie sunxi_defconfig : passed 0:54.89 cubie multi_v7_defconfig : passed 1:00.88 cubie2 sunxi_defconfig : passed 0:54.86 cubie2 multi_v7_defconfig : passed 1:04.16 cubie2 multi_lpae_defconfig : passed 0:53.33 dalmore tegra_defconfig : passed 1:31.04 dalmore multi_v7_defconfig : passed 1:19.13 dalmore multi_lpae_defconfig : passed 1:19.27 hummingboard imx_v6_v7_defconfig : passed 1:23.82 hummingboard multi_v7_defconfig : passed 1:08.38 omap5uevm multi_v7_defconfig : passed 1:48.71 omap5uevm multi_lpae_defconfig : passed 1:56.32 panda omap2plus_defconfig : warnings 1:19.98 panda multi_v7_defconfig : passed 1:32.74 sama5 sama5_defconfig : passed 2:00.62 seaboard tegra_defconfig : passed 1:19.44 seaboard multi_v7_defconfig : passed 1:14.39 snowball u8500_defconfig : passed 1:31.12 trimslice tegra_defconfig : passed 1:08.96 trimslice multi_v7_defconfig : passed 1:02.93 wandboard imx_v6_v7_defconfig : passed 1:03.51 wandboard multi_v7_defconfig : passed 1:05.23 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:09.71 snow exynos_defconfig : OFFLINE 0:49.70 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-dtoFc1/tmpY1t3SM-uImage tftp 0x01000000 tmp/snowball-dtoFc1/tmpY1t3SM-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-dtoFc1/tmpY1t3SM-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4728713 (482789 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4728649 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.15-rc5-736-gd6393d5)

by Olof's autobuilder

10 years, 7 months

arm-soc boot: 55 pass, 0 fail (v3.15-rc5-735-g21985e4)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc5-735-g21985e4 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.4 sec: PASS da850-evm 0 min 19.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 25.5 sec: PASS tegra30-beaver 0 min 21.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 25.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.4 sec: PASS omap5-uevm 1 min 48.1 sec: PASS sun7i-a20-cubieboard2 0 min 16.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 23.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 23.1 sec: PASS imx6q-wandboard 0 min 21.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 57.4 sec: PASS am335x-boneblack 0 min 29.9 sec: PASS omap3-beagle-xm 1 min 4.8 sec: PASS legacy,3530beagle 0 min 42.1 sec: PASS (Warnings: 1) omap4-panda 1 min 15.8 sec: PASS omap3-overo-tobi 0 min 27.3 sec: PASS (Warnings: 1) am335x-bone 0 min 31.5 sec: PASS omap3-overo-storm-tobi 0 min 28.8 sec: PASS omap5-uevm 1 min 4.0 sec: PASS omap3-n900 0 min 21.4 sec: PASS (Warnings: 1) legacy,n900 0 min 21.0 sec: PASS (Warnings: 1) omap4-panda-es 1 min 17.6 sec: PASS legacy,3730storm 0 min 26.8 sec: PASS legacy,3530overo 0 min 25.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 21.2 sec: PASS ste-snowball 1 min 25.9 sec: PASS tegra30-beaver 0 min 33.1 sec: PASS am335x-boneblack 0 min 28.2 sec: PASS omap3-beagle-xm 0 min 53.4 sec: PASS sun7i-a20-cubieboard2 0 min 16.4 sec: PASS armada-370-mirabox 0 min 26.6 sec: PASS omap4-panda 1 min 3.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.2 sec: PASS sun4i-a10-cubieboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 30.1 sec: PASS omap3-overo-tobi 0 min 26.7 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 22.2 sec: PASS am335x-bone 0 min 30.8 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 1 min 40.3 sec: PASS omap3-n900 0 min 20.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 21.0 sec: PASS omap4-panda-es 1 min 2.4 sec: PASS imx6dl-wandboard,wand-dual 0 min 22.4 sec: PASS tegra124-jetson-tk1 0 min 25.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.8 sec: PASS sun4i-a10-cubieboard 0 min 16.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 26.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.6 sec: PASS exynos5250-arndale 0 min 32.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 36.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.4 sec: PASS armada-370-mirabox 0 min 24.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 56.3 sec: PASS

10 years, 7 months

mainline boot: 52 pass, 0 fail (v3.15-rc6)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc6 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.7 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 24.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS omap5-uevm 1 min 34.7 sec: PASS sun7i-a20-cubieboard2 0 min 11.7 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 54.0 sec: PASS am335x-boneblack 0 min 25.6 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 35.5 sec: PASS (Warnings: 1) omap4-panda 1 min 8.6 sec: PASS omap3-overo-tobi 0 min 23.6 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 24.8 sec: PASS omap5-uevm 1 min 5.3 sec: PASS omap3-n900 0 min 17.8 sec: PASS (Warnings: 1) legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 7.5 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.9 sec: PASS ste-snowball 1 min 18.0 sec: PASS tegra30-beaver 0 min 17.2 sec: PASS am335x-boneblack 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 45.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 54.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS sun4i-a10-cubieboard 0 min 19.2 sec: PASS bcm28155-ap 0 min 25.9 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.2 sec: PASS am335x-bone 0 min 37.0 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 33.5 sec: PASS omap3-n900 0 min 16.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 54.3 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.9 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.3 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 34.7 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS

10 years, 7 months

mainline boot: 30 passed 2 failed (mainline/v3.15-rc6)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:44.82 snowball multi_v7_defconfig : FAILED 1:47.42 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.95 arndale exynos_defconfig : passed 1:03.77 bbb omap2plus_defconfig : passed 1:35.35 bbb multi_v7_defconfig : passed 1:23.26 beaver tegra_defconfig : passed 0:53.72 beaver multi_v7_defconfig : passed 0:52.18 capri bcm_defconfig : passed 0:45.30 capri multi_v7_defconfig : passed 0:45.25 cubie sunxi_defconfig : passed 0:55.01 cubie multi_v7_defconfig : passed 1:05.31 cubie2 sunxi_defconfig : passed 0:55.42 cubie2 multi_v7_defconfig : passed 1:10.98 cubie2 multi_lpae_defconfig : passed 1:57.11 dalmore tegra_defconfig : passed 1:24.81 dalmore multi_v7_defconfig : passed 1:15.71 dalmore multi_lpae_defconfig : passed 1:18.43 hummingboard imx_v6_v7_defconfig : passed 1:27.74 hummingboard multi_v7_defconfig : passed 1:16.79 omap5uevm multi_v7_defconfig : passed 1:46.18 omap5uevm multi_lpae_defconfig : passed 1:41.64 panda omap2plus_defconfig : warnings 1:19.16 sama5 sama5_defconfig : passed 2:05.20 seaboard tegra_defconfig : passed 1:06.72 seaboard multi_v7_defconfig : passed 1:12.69 snow exynos_defconfig : passed 1:32.48 snowball u8500_defconfig : passed 1:45.84 trimslice tegra_defconfig : passed 1:02.00 trimslice multi_v7_defconfig : passed 1:25.05 wandboard imx_v6_v7_defconfig : passed 1:05.99 wandboard multi_v7_defconfig : passed 1:04.06 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:34.78 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.624389] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.632080] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.638977] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646850] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653747] usbcore: registered new interface driver usbhid [ 1.659606] usbhid: USB HID core driver [ 1.667572] TCP: cubic registered [ 1.671051] NET: Registered protocol family 17 [ 1.675903] Key type dns_resolver registered [ 1.680847] Power Management for TI OMAP4+ devices. [ 1.685974] Power Management for TI OMAP4. [ 1.690277] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697692] ThumbEE CPU extension supported. [ 1.702178] Registering SWP/SWPB emulation handler [ 1.707916] vwl1271: 1800 mV [ 1.712432] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722351] twl 0-0048: PIH (irq 39) nested IRQs [ 1.728027] twl_rtc rtc.15: Power up reset detected. [ 1.733917] twl_rtc rtc.15: Enabling TWL-RTC [ 1.740936] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.747802] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.753906] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.760070] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766143] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771697] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777130] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782135] VDAC: 1800 mV [ 1.782135] VANA: 2100 mV [ 1.789428] VCXIO: 1800 mV [ 1.792785] VUSB: 3300 mV [ 1.796356] V1V8: 1800 mV [ 1.799957] V2V1: 2100 mV [ 1.879394] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.077972] hub 1-1:1.0: USB hub found [ 2.082244] hub 1-1:1.0: 5 ports detected [ 2.555114] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.896697] smsc95xx v1.0.4 [ 8.326690] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 16:68:ea:8d:37:ef ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Z5Gape/tmp_N1Ggc-uImage tftp 0x01000000 tmp/snowball-Z5Gape/tmp_N1Ggc-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-Z5Gape/tmp_N1Ggc-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4694193 (47a0b1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4694129 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline boot: 21 pass, 1 fail (v3.15-rc6)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc6 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: arm-multi_v7_defconfig Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver 0 min 24.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.0 sec: PASS omap5-uevm 1 min 34.7 sec: PASS sun7i-a20-cubieboard2 0 min 11.7 sec: PASS arm-multi_v7_defconfig ---------------------- ste-snowball 1 min 18.0 sec: PASS tegra30-beaver 0 min 17.2 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS qcom-apq8074-dragonboard 0 min 16.9 sec: PASS omap4-panda 0 min 54.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) am335x-bone 0 min 37.0 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap3-n900 0 min 16.3 sec: PASS (Warnings: 1) omap4-panda-es 2 min 18.9 sec: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.9 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.3 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- omap4-panda-es: FAIL: last 40 lines of boot log: ------------------------------------------------ [ 1.794403] twl 0-0048: PIH (irq 39) nested IRQs [ 1.800720] twl_rtc rtc.15: Enabling TWL-RTC [ 1.807556] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.814666] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.820800] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.826904] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.833007] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.838531] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.844024] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.849182] VDAC: 1800 mV [ 1.849548] VANA: 2100 mV [ 1.856414] VCXIO: 1800 mV [ 1.856414] VUSB: 3300 mV [ 1.863433] V1V8: 1800 mV [ 1.867004] V2V1: 2100 mV [ 1.874603] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.958679] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.125701] gic_timer_retrigger: lost localtimer interrupt [ 2.131530] hub 1-1:1.0: USB hub found [ 2.136016] gic_timer_retrigger: lost localtimer interrupt [ 2.141876] hub 1-1:1.0: 5 ports detected [ 2.190032] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.439483] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.490386] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.582702] smsc95xx v1.0.4 [ 2.656219] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, d6:88:9a:f3:51:0f [ 2.819641] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.829956] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 3.028015] twl_rtc rtc.15: setting system clock to 2000-01-28 08:17:48 UTC (949047468) [ 3.048400] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.058959] mmc0: new high speed SDHC card at address 1234 [ 3.065216] mmcblk0: mmc0:1234 SA04G 3.63 GiB [ 3.071655] mmcblk0: p1 p2 [ 3.079772] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.097961] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.104614] mmc1: new SDIO card at address 0001 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 138.94 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc6)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 4b660a7 Linux 3.15-rc6 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc6/ Runtime: 42m 33s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

arm-soc boot: 28 passed 3 failed (arm-soc/v3.15-rc5-735-g21985e4)

by Olof's autobooter

Failed boards: cubie2 multi_lpae_defconfig : FAILED 2:03.82 panda multi_v7_defconfig : FAILED 3:12.39 snowball multi_v7_defconfig : FAILED 1:16.46 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:22.45 arndale exynos_defconfig : passed 1:19.25 bbb omap2plus_defconfig : passed 1:37.36 bbb multi_v7_defconfig : passed 1:20.14 beaver tegra_defconfig : passed 0:52.40 beaver multi_v7_defconfig : passed 1:29.22 capri bcm_defconfig : passed 0:45.49 capri multi_v7_defconfig : passed 0:45.82 cubie sunxi_defconfig : passed 1:26.18 cubie multi_v7_defconfig : passed 1:28.56 cubie2 sunxi_defconfig : passed 1:32.81 cubie2 multi_v7_defconfig : passed 2:02.66 dalmore tegra_defconfig : passed 1:46.75 dalmore multi_lpae_defconfig : passed 1:34.46 hummingboard imx_v6_v7_defconfig : passed 1:17.58 hummingboard multi_v7_defconfig : passed 1:05.41 omap5uevm omap2plus_defconfig : passed 1:00.89 omap5uevm multi_v7_defconfig : passed 2:13.55 omap5uevm multi_lpae_defconfig : passed 2:07.14 panda omap2plus_defconfig : warnings 1:15.86 sama5 sama5_defconfig : passed 1:59.49 seaboard tegra_defconfig : passed 1:07.44 seaboard multi_v7_defconfig : passed 1:10.67 snow exynos_defconfig : passed 1:52.36 snowball u8500_defconfig : passed 1:25.12 trimslice tegra_defconfig : passed 1:10.45 trimslice multi_v7_defconfig : passed 1:06.90 wandboard multi_v7_defconfig : passed 0:52.04 Offline boards: dalmore multi_v7_defconfig : OFFLINE 0:40.63 wandboard imx_v6_v7_defconfig : OFFLINE 0:26.88 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: apr_sockaddr_info_get() failed for cubie2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. Debian GNU/Linux 7.0 cubie2 ttyS0 cubie2 login: root root [ 56.901929] nfs: server 172.16.1.7 not responding, still trying [ 69.913359] nfs: server 172.16.1.7 OK Password: root Last login: Wed May 21 23:22:07 UTC 2014 on ttyS0 Linux cubie2 3.15.0-rc5-00735-g21985e4 #1 SMP Wed May 21 16:03:02 PDT 2014 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@cubie2:~# cat /proc/cmdline cat /proc/cmdline console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp root@cubie2:~# uname -r uname -r 3.15.0-rc5-00735-g21985e4 root@cubie2:~# cat /proc/cpuinfo cat /proc/cpuinfo [ 82.481934] nfs: server 172.16.1.7 not responding, still trying ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: cat /proc/cpuinfo. ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.465393] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.473999] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.491210] devtmpfs: mounted [ 2.494354] Freeing unused kernel memory: 560K (c0a80000 - c0b0c000) [ 2.554260] smsc95xx v1.0.4 [ 2.618438] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 96:5e:4c:1c:89:10 INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 3.266204] udevd[175]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.866027] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 4.886627] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 6.738830] random: nonblocking pool is initialized [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 8.274963] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup Listening on LPF/eth0/96:5e:4c:1c:89:10 Sending on LPF/eth0/96:5e:4c:1c:89:10 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 10.037445] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 12.117889] gic_timer_retrigger: lost localtimer interrupt [ 12.124053] gic_timer_retrigger: lost localtimer interrupt DHCPREQUEST on eth0 to 255.255.255.255 port 67 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-lPxdr4/tmpVt5Vyb-uImage tftp 0x01000000 tmp/snowball-lPxdr4/tmpVt5Vyb-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-lPxdr4/tmpVt5Vyb-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4728713 (482789 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4728649 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline boot: 52 pass, 0 fail (v3.15-rc5-300-g11da37b)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc5-300-g11da37b Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 20.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 41.5 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.2 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.3 sec: PASS am335x-boneblack 0 min 25.9 sec: PASS omap3-beagle-xm 1 min 0.9 sec: PASS legacy,3530beagle 0 min 35.2 sec: PASS (Warnings: 1) omap4-panda 1 min 10.4 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.9 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 1 min 6.6 sec: PASS omap3-n900 0 min 17.9 sec: PASS (Warnings: 1) legacy,n900 0 min 17.4 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.0 sec: PASS legacy,3730storm 0 min 23.4 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.4 sec: PASS ste-snowball 1 min 18.6 sec: PASS tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 24.1 sec: PASS omap3-beagle-xm 0 min 49.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 59.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 14.5 sec: PASS bcm28155-ap 0 min 26.0 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.3 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 20.8 sec: PASS omap5-uevm 1 min 39.3 sec: PASS omap3-n900 0 min 16.2 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.3 sec: PASS omap4-panda-es 0 min 55.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.5 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.9 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 30.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 30.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS

10 years, 7 months

arm-soc build: 7 warnings 10 failures (arm-soc/v3.15-rc5-735-g21985e4)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 21985e4 arm-soc: document new merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc5-735-g21985e4/ Runtime: 44m 26s Passed: 114 Failed: 10 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ape6evm_defconfig armadillo800eva_defconfig bockw_defconfig genmai_defconfig koelsch_defconfig kzm9g_defconfig lager_defconfig mackerel_defconfig marzen_defconfig shmobile_defconfig ------------------------------------------------------------------------------- Errors: ape6evm_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree armadillo800eva_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree bockw_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree genmai_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree koelsch_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree kzm9g_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree lager_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree mackerel_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree marzen_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree shmobile_defconfig: Error: arch/arm/boot/dts/r8a7790-lager.dts:287.1-7 syntax error FATAL ERROR: Unable to parse input tree Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

← Newer
1
...
10
11
12
13
14
15
16
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014