Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

next build: 373 warnings 1 failures (next/next-20140520)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 6b6ba7b Add linux-next specific files for 20140520 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140520/ Runtime: 41m 23s Passed: 123 Failed: 1 Warnings: 373 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: lpc32xx_defconfig ------------------------------------------------------------------------------- Errors: lpc32xx_defconfig: drivers/pinctrl/sunxi/Kconfig:3:error: recursive dependency detected! arch/arm/mach-lpc32xx/phy3250.c:205:2: error: unknown field 'dma_filter' specified in initializer Warnings: 1 arch/arm/mach-exynos/exynos.c:207:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable 'ret' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 10 include/linux/bitops.h:48) [-Wdeprecated-declarations] 25 kernel/events/core.c:7435:35: warning: unused variable 'tmp' [-Wunused-variable] 108 mm/compaction.c:773:15: warning: 'next_free_pfn' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12728): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12730): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12738): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12740): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12748): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12750): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12758): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12760): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12768): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12770): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12778): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12780): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28228): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28230): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28238): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28240): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28248): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28250): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28258): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28260): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28268): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28270): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28278): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28280): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

mainline boot: 30 passed 1 failed (mainline/v3.15-rc5-157-g60b5f90)

by Olof's autobooter

Failed boards: snowball multi_v7_defconfig : FAILED 1:21.29 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.13 arndale exynos_defconfig : passed 1:04.85 bbb omap2plus_defconfig : passed 1:43.30 bbb multi_v7_defconfig : passed 1:27.77 beaver tegra_defconfig : passed 0:52.88 beaver multi_v7_defconfig : passed 0:55.99 capri bcm_defconfig : passed 0:45.00 capri multi_v7_defconfig : passed 0:45.69 cubie sunxi_defconfig : passed 1:09.59 cubie multi_v7_defconfig : passed 1:19.25 cubie2 sunxi_defconfig : passed 1:07.55 cubie2 multi_v7_defconfig : passed 1:19.83 cubie2 multi_lpae_defconfig : passed 1:02.29 dalmore tegra_defconfig : passed 1:34.11 dalmore multi_v7_defconfig : passed 1:18.19 dalmore multi_lpae_defconfig : passed 1:19.63 hummingboard imx_v6_v7_defconfig : passed 1:30.31 hummingboard multi_v7_defconfig : passed 1:06.87 omap5uevm multi_v7_defconfig : passed 1:45.05 omap5uevm multi_lpae_defconfig : passed 1:43.57 panda omap2plus_defconfig : warnings 1:19.22 panda multi_v7_defconfig : passed 2:09.11 sama5 sama5_defconfig : passed 1:58.17 seaboard tegra_defconfig : passed 1:02.62 snow exynos_defconfig : passed 1:32.05 snowball u8500_defconfig : passed 1:19.25 trimslice tegra_defconfig : passed 0:59.73 trimslice multi_v7_defconfig : passed 1:07.79 wandboard imx_v6_v7_defconfig : passed 0:56.79 wandboard multi_v7_defconfig : passed 1:01.02 Offline boards: omap5uevm omap2plus_defconfig : OFFLINE 2:12.89 seaboard multi_v7_defconfig : OFFLINE 0:45.08 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-vBrl6f/tmpRzASfm-uImage tftp 0x01000000 tmp/snowball-vBrl6f/tmpRzASfm-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-vBrl6f/tmpRzASfm-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4693665 (479ea1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4693601 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc5-157-g60b5f90)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 60b5f90 Merge tag 'sound-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc5-157-g60b5f90/ Runtime: 42m 32s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

arm-soc boot: 29 passed 2 failed (arm-soc/v3.15-rc4-420-g11372f5)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 1:44.06 snowball multi_v7_defconfig : FAILED 1:14.29 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.18 arndale exynos_defconfig : passed 1:02.22 bbb omap2plus_defconfig : passed 1:34.09 beaver tegra_defconfig : passed 0:50.45 beaver multi_v7_defconfig : passed 0:50.42 capri bcm_defconfig : passed 0:43.09 capri multi_v7_defconfig : passed 0:46.52 cubie sunxi_defconfig : passed 1:01.28 cubie multi_v7_defconfig : passed 1:23.45 cubie2 sunxi_defconfig : passed 0:52.01 cubie2 multi_v7_defconfig : passed 1:10.46 cubie2 multi_lpae_defconfig : passed 1:06.63 dalmore tegra_defconfig : passed 1:24.53 dalmore multi_v7_defconfig : passed 1:21.11 dalmore multi_lpae_defconfig : passed 1:19.82 hummingboard imx_v6_v7_defconfig : passed 1:24.04 hummingboard multi_v7_defconfig : passed 1:05.14 omap5uevm multi_v7_defconfig : passed 1:43.26 omap5uevm multi_lpae_defconfig : passed 1:43.68 panda omap2plus_defconfig : warnings 1:16.73 sama5 sama5_defconfig : passed 1:54.71 seaboard tegra_defconfig : passed 1:05.62 seaboard multi_v7_defconfig : passed 2:03.33 snow exynos_defconfig : passed 1:32.24 snowball u8500_defconfig : passed 1:20.31 trimslice tegra_defconfig : passed 1:00.10 trimslice multi_v7_defconfig : passed 1:06.51 wandboard imx_v6_v7_defconfig : passed 0:57.24 wandboard multi_v7_defconfig : passed 1:01.97 Offline boards: bbb multi_v7_defconfig : OFFLINE 0:58.93 omap5uevm omap2plus_defconfig : OFFLINE 2:28.09 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.661499] usbhid: USB HID core driver [ 1.669494] TCP: cubic registered [ 1.672973] NET: Registered protocol family 17 [ 1.677642] can: controller area network core (rev 20120528 abi 9) [ 1.684143] NET: Registered protocol family 29 [ 1.688781] can: raw protocol (rev 20120528) [ 1.693237] can: broadcast manager protocol (rev 20120528 t) [ 1.699127] can: netlink gateway (rev 20130117) max_hops=1 [ 1.705230] Key type dns_resolver registered [ 1.710144] Power Management for TI OMAP4+ devices. [ 1.715270] Power Management for TI OMAP4. [ 1.719543] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726898] ThumbEE CPU extension supported. [ 1.726898] Registering SWP/SWPB emulation handler [ 1.737152] vwl1271: 1800 mV [ 1.742156] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.751617] twl 0-0048: PIH (irq 39) nested IRQs [ 1.757263] twl_rtc rtc.15: Power up reset detected. [ 1.763183] twl_rtc rtc.15: Enabling TWL-RTC [ 1.770111] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.777069] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.783172] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.789245] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.795379] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800903] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.806396] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811431] VDAC: 1800 mV [ 1.811889] VANA: 2100 mV [ 1.818756] VCXIO: 1800 mV [ 1.818756] VUSB: 3300 mV [ 1.825683] V1V8: 1800 mV [ 1.829254] V2V1: 2100 mV [ 1.891571] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.072296] hub 1-1:1.0: USB hub found [ 2.076354] hub 1-1:1.0: 5 ports detected [ 2.371368] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.574737] smsc95xx v1.0.4 [ 2.733367] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 52:56:fe:ba:97:21 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-2sqFx8/tmp3FwjX8-uImage tftp 0x01000000 tmp/snowball-2sqFx8/tmp3FwjX8-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-2sqFx8/tmp3FwjX8-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4728665 (482759 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4728601 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

arm-soc boot: 4 pass, 0 fail (v3.15-rc4-420-g11372f5)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc4-420-g11372f5 Full Report =========== arm-tegra_defconfig ------------------- tegra30-beaver 0 min 19.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.8 sec: PASS exynos5250-arndale 0 min 36.0 sec: PASS

10 years, 7 months

arm-soc build: 8 warnings 0 failures (arm-soc/v3.15-rc4-420-g11372f5)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 11372f5 for-next: arm: SoC: document merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc4-420-g11372f5/ Runtime: 42m 24s Passed: 124 Failed: 0 Warnings: 8 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

mainline boot: 32 passed 1 failed (mainline/v3.15-rc5-109-g6ed8bf8)

by Olof's autobooter

Failed boards: snowball multi_v7_defconfig : FAILED 1:15.73 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.94 arndale exynos_defconfig : passed 1:07.68 bbb omap2plus_defconfig : passed 1:34.78 bbb multi_v7_defconfig : passed 1:26.48 beaver tegra_defconfig : passed 0:51.22 beaver multi_v7_defconfig : passed 0:53.50 capri bcm_defconfig : passed 0:44.60 capri multi_v7_defconfig : passed 0:46.02 cubie sunxi_defconfig : passed 1:01.04 cubie multi_v7_defconfig : passed 1:10.29 cubie2 sunxi_defconfig : passed 1:01.41 cubie2 multi_v7_defconfig : passed 1:00.93 cubie2 multi_lpae_defconfig : passed 1:00.62 dalmore tegra_defconfig : passed 1:20.93 dalmore multi_v7_defconfig : passed 1:20.17 dalmore multi_lpae_defconfig : passed 1:18.91 hummingboard imx_v6_v7_defconfig : passed 1:24.93 hummingboard multi_v7_defconfig : passed 1:06.13 omap5uevm omap2plus_defconfig : passed 1:14.90 omap5uevm multi_v7_defconfig : passed 1:47.09 omap5uevm multi_lpae_defconfig : passed 1:40.50 panda omap2plus_defconfig : warnings 1:17.66 panda multi_v7_defconfig : passed 1:21.07 sama5 sama5_defconfig : passed 1:51.03 seaboard tegra_defconfig : passed 1:01.90 seaboard multi_v7_defconfig : passed 1:08.69 snow exynos_defconfig : passed 1:27.90 snowball u8500_defconfig : passed 1:22.50 trimslice tegra_defconfig : passed 1:03.34 trimslice multi_v7_defconfig : passed 0:57.69 wandboard imx_v6_v7_defconfig : passed 0:57.25 wandboard multi_v7_defconfig : passed 0:59.96 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-wGYnlT/tmpzZRloJ-uImage tftp 0x01000000 tmp/snowball-wGYnlT/tmpzZRloJ-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-wGYnlT/tmpzZRloJ-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690441 (479209 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690377 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc5-109-g6ed8bf8)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 6ed8bf8 Merge branch 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc5-109-g6ed8bf8/ Runtime: 41m 37s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

mainline boot: 16 pass, 1 fail (v3.15-rc5-109-g6ed8bf8)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc5-109-g6ed8bf8 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.5 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 25.7 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 1 min 37.0 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.8 sec: PASS imx6q-wandboard 0 min 19.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.8 sec: PASS sun4i-a10-cubieboard 0 min 12.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.2 sec: PASS exynos5250-arndale 0 min 29.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.2 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 40 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.36 seconds. # PYBOOT: Result: OFFLINE

10 years, 7 months

mainline boot: 31 passed 2 failed (mainline/v3.15-rc5-86-g172de65)

by Olof's autobooter

Failed boards: panda multi_v7_defconfig : FAILED 3:10.30 snowball multi_v7_defconfig : FAILED 1:13.29 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.61 arndale exynos_defconfig : passed 1:06.30 bbb omap2plus_defconfig : passed 1:37.25 bbb multi_v7_defconfig : passed 1:26.37 beaver tegra_defconfig : passed 1:05.61 beaver multi_v7_defconfig : passed 0:53.00 capri bcm_defconfig : passed 0:47.95 capri multi_v7_defconfig : passed 0:45.09 cubie sunxi_defconfig : passed 1:08.33 cubie multi_v7_defconfig : passed 1:07.10 cubie2 sunxi_defconfig : passed 1:12.11 cubie2 multi_v7_defconfig : passed 1:14.30 cubie2 multi_lpae_defconfig : passed 1:19.76 dalmore tegra_defconfig : passed 1:25.18 dalmore multi_v7_defconfig : passed 1:19.67 dalmore multi_lpae_defconfig : passed 1:18.76 hummingboard imx_v6_v7_defconfig : passed 1:23.34 hummingboard multi_v7_defconfig : passed 1:14.05 omap5uevm omap2plus_defconfig : passed 1:17.33 omap5uevm multi_v7_defconfig : passed 1:49.11 omap5uevm multi_lpae_defconfig : passed 1:48.73 panda omap2plus_defconfig : warnings 1:16.55 sama5 sama5_defconfig : passed 2:03.23 seaboard tegra_defconfig : passed 1:08.46 seaboard multi_v7_defconfig : passed 1:15.03 snow exynos_defconfig : passed 1:36.71 snowball u8500_defconfig : passed 2:15.71 trimslice tegra_defconfig : passed 1:02.99 trimslice multi_v7_defconfig : passed 1:04.22 wandboard imx_v6_v7_defconfig : passed 0:56.10 wandboard multi_v7_defconfig : passed 0:59.93 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.771728] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777191] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782196] VDAC: 1800 mV [ 1.782196] VANA: 2100 mV [ 1.789489] VCXIO: 1800 mV [ 1.789520] VUSB: 3300 mV [ 1.796417] V1V8: 1800 mV [ 1.799987] V2V1: 2100 mV [ 1.806060] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879272] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.080261] hub 1-1:1.0: USB hub found [ 2.084350] hub 1-1:1.0: 5 ports detected [ 2.130157] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.369354] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.377044] gic_timer_retrigger: lost localtimer interrupt [ 2.439605] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.513458] smsc95xx v1.0.4 [ 2.583465] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 3a:59:25:73:05:12 [ 2.759552] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.767608] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.981903] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.996032] ALSA device list: [ 2.999267] No soundcards found. [ 3.003204] Waiting for root device /dev/mmcblk0p2... [ 3.015472] mmc0: host does not support reading read-only switch. assuming write-enable. [ 3.025878] mmc0: new high speed SDHC card at address b368 [ 3.032012] mmcblk0: mmc0:b368 00000 7.51 GiB [ 3.038574] mmcblk0: p1 p2 [ 3.046691] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.066650] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.073333] mmc1: new SDIO card at address 0001 [ 3.139495] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.148956] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.173339] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.181976] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.200256] devtmpfs: mounted [ 3.200256] Freeing unused kernel memory: 556K (c0a70000 - c0afb000) INIT: version 2.88 booting ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-u6ZKRb/tmpv0MdK8-uImage tftp 0x01000000 tmp/snowball-u6ZKRb/tmpv0MdK8-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-u6ZKRb/tmpv0MdK8-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4693745 (479ef1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4693681 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

← Newer
1
...
13
14
15
16
17
18
19
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014