Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

mainline build: 7 warnings 0 failures (mainline/v3.15-rc4-320-gafcf0a2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: afcf0a2 Merge tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc4-320-gafcf0a2/ Runtime: 41m 28s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

mainline boot: 52 pass, 0 fail (v3.15-rc4-316-gf322e26)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc4-316-gf322e26 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 20.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS omap5-uevm 1 min 39.0 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 54.4 sec: PASS am335x-boneblack 0 min 44.1 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 42.6 sec: PASS (Warnings: 1) omap4-panda 1 min 6.8 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.4 sec: PASS omap5-uevm 1 min 4.5 sec: PASS (Warnings: 1) omap3-n900 0 min 17.4 sec: PASS (Warnings: 1) legacy,n900 0 min 16.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 12.7 sec: PASS legacy,3730storm 0 min 23.2 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 15.5 sec: PASS ste-snowball 1 min 17.6 sec: PASS tegra30-beaver 0 min 19.8 sec: PASS am335x-boneblack 0 min 37.6 sec: PASS omap3-beagle-xm 0 min 53.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 56.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.2 sec: PASS sun4i-a10-cubieboard 0 min 19.6 sec: PASS bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-bone 0 min 31.8 sec: PASS omap3-overo-storm-tobi 0 min 24.3 sec: PASS omap5-uevm 1 min 41.4 sec: PASS (Warnings: 1) omap3-n900 0 min 14.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.7 sec: PASS omap4-panda-es 0 min 59.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.4 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 12.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.7 sec: PASS exynos5250-arndale 0 min 30.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 32.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 18.6 sec: PASS

10 years, 7 months

mainline boot: 31 passed 2 failed (mainline/v3.15-rc4-316-gf322e26)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.92 snowball multi_v7_defconfig : FAILED 1:13.04 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.35 arndale exynos_defconfig : passed 1:11.05 bbb omap2plus_defconfig : passed 1:42.47 bbb multi_v7_defconfig : passed 1:20.56 beaver tegra_defconfig : passed 0:55.26 beaver multi_v7_defconfig : passed 0:54.43 capri bcm_defconfig : passed 0:45.39 capri multi_v7_defconfig : passed 0:45.00 cubie sunxi_defconfig : passed 1:01.12 cubie multi_v7_defconfig : passed 1:08.72 cubie2 multi_v7_defconfig : passed 1:17.01 cubie2 multi_lpae_defconfig : passed 1:12.57 dalmore tegra_defconfig : passed 1:25.89 dalmore multi_v7_defconfig : passed 1:28.48 dalmore multi_lpae_defconfig : passed 1:16.48 hummingboard imx_v6_v7_defconfig : passed 1:27.56 hummingboard multi_v7_defconfig : passed 1:11.77 omap5uevm omap2plus_defconfig : warnings 0:59.62 omap5uevm multi_v7_defconfig : warnings 1:46.35 omap5uevm multi_lpae_defconfig : warnings 1:43.36 panda omap2plus_defconfig : warnings 1:14.26 panda multi_v7_defconfig : passed 3:08.37 sama5 sama5_defconfig : passed 1:50.20 seaboard tegra_defconfig : passed 1:07.65 seaboard multi_v7_defconfig : passed 1:13.42 snow exynos_defconfig : passed 1:34.18 snowball u8500_defconfig : passed 1:23.06 trimslice tegra_defconfig : passed 1:01.96 trimslice multi_v7_defconfig : passed 1:00.91 wandboard imx_v6_v7_defconfig : passed 1:02.41 wandboard multi_v7_defconfig : passed 0:54.95 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017698] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017722] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017735] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017758] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017770] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018712] Switched to clocksource arch_sys_counter [ 0.025870] NET: Registered protocol family 2 [ 0.026336] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026424] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026545] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026628] TCP: reno registered [ 0.026644] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026701] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026902] NET: Registered protocol family 1 [ 0.027291] RPC: Registered named UNIX socket transport module. [ 0.027307] RPC: Registered udp transport module. [ 0.027313] RPC: Registered tcp transport module. [ 0.027319] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028277] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028837] bounce pool size: 64 pages [ 0.036586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036604] io scheduler noop registered [ 0.036610] io scheduler deadline registered [ 0.036793] io scheduler cfq registered (default) [ 0.038427] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080427] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082848] console [ttyS0] disabled [ 0.103049] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618468] console [ttyS0] enabled [ 0.623185] mousedev: PS/2 mouse device common for all mice [ 0.629055] i2c /dev entries driver [ 0.633844] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642828] TCP: cubic registered [ 0.646147] NET: Registered protocol family 17 [ 0.650711] Registering SWP/SWPB emulation handler [ 0.656433] ahci-5v: 5000 mV [ 0.659725] usb1-vbus: 5000 mV [ 0.663080] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.110 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x01000000 tmp/snowball-Ep_cKv/tmpQd2OaD-uImage tftp 0x01000000 tmp/snowball-Ep_cKv/tmpQd2OaD-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'tmp/snowball-Ep_cKv/tmpQd2OaD-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690545 (479271 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690481 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc4-316-gf322e26)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: f322e26 Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc4-316-gf322e26/ Runtime: 39m 59s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/irqchip/irq-clps711x.c:78:1: warning: 'externally_visible' attribute have effect only on public objects [-Wattributes] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

next boot: 50 pass, 1 fail (next-20140508)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140508 Failed boot tests (console logs at the end) =========================================== omap4-panda-es: FAIL: arm-multi_v7_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.5 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS omap5-uevm 1 min 37.5 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.2 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.2 sec: PASS imx6q-wandboard 0 min 17.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 53.6 sec: PASS am335x-boneblack 0 min 44.0 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 35.9 sec: PASS (Warnings: 1) omap4-panda 1 min 3.2 sec: PASS omap3-overo-tobi 0 min 26.6 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 1 min 6.8 sec: PASS omap3-n900 0 min 17.4 sec: PASS (Warnings: 1) legacy,n900 0 min 16.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 7.5 sec: PASS legacy,3730storm 0 min 22.7 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.2 sec: PASS ste-snowball 1 min 20.6 sec: PASS tegra30-beaver 0 min 20.6 sec: PASS am335x-boneblack 0 min 37.6 sec: PASS omap3-beagle-xm 0 min 47.6 sec: PASS sun7i-a20-cubieboard2 0 min 12.1 sec: PASS armada-370-mirabox 0 min 22.8 sec: PASS omap4-panda 0 min 50.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.4 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.9 sec: PASS omap3-overo-tobi 0 min 22.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.5 sec: PASS am335x-bone 0 min 27.0 sec: PASS omap3-overo-storm-tobi 0 min 24.6 sec: PASS omap5-uevm 1 min 37.6 sec: PASS omap3-n900 0 min 15.9 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.4 sec: PASS omap4-panda-es 2 min 24.4 sec: FAIL imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 12.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.5 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.1 sec: PASS exynos5250-arndale 0 min 30.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 30.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.7 sec: PASS armada-370-mirabox 0 min 20.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.4 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- omap4-panda-es: FAIL: last 80 lines of boot log: ------------------------------------------------ [ 1.456359] 4806e000.serial: ttyO3 at MMIO 0x4806e000 (irq = 102, base_baud = 3000000) is a OMAP UART3 [ 1.466583] STMicroelectronics ASC driver initialized [ 1.472839] serial: Freescale lpuart driver [ 1.477478] [drm] Initialized drm 1.1.0 20060810 [ 1.487823] loop: module loaded [ 1.497772] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.505584] usbcore: registered new interface driver pegasus [ 1.511627] usbcore: registered new interface driver asix [ 1.517364] usbcore: registered new interface driver ax88179_178a [ 1.523803] usbcore: registered new interface driver cdc_ether [ 1.529998] usbcore: registered new interface driver smsc75xx [ 1.536102] usbcore: registered new interface driver smsc95xx [ 1.542205] usbcore: registered new interface driver net1080 [ 1.548187] usbcore: registered new interface driver cdc_subset [ 1.554443] usbcore: registered new interface driver zaurus [ 1.560394] usbcore: registered new interface driver cdc_ncm [ 1.566375] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.573242] ehci-pci: EHCI PCI platform driver [ 1.577972] ehci-platform: EHCI generic platform driver [ 1.583679] ehci-omap: OMAP-EHCI Host Controller driver [ 1.609436] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.615112] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.623443] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.646270] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.653198] hub 1-0:1.0: USB hub found [ 1.657196] hub 1-0:1.0: 3 ports detected [ 1.661895] ehci-orion: EHCI orion driver [ 1.666320] SPEAr-ehci: EHCI SPEAr driver [ 1.670684] tegra-ehci: Tegra EHCI driver [ 1.675598] usbcore: registered new interface driver usb-storage [ 1.683868] mousedev: PS/2 mouse device common for all mice [ 1.692016] i2c /dev entries driver [ 1.696624] usbcore: registered new interface driver uvcvideo [ 1.702636] USB Video Class driver (1.1.1) [ 1.706970] gspca_main: v2.14.0 registered [ 1.713531] sdhci: Secure Digital Host Controller Interface driver [ 1.720031] sdhci: Copyright(c) Pierre Ossman [ 1.725555] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 1.732482] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.740173] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.747100] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.755004] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.761932] usbcore: registered new interface driver usbhid [ 1.767822] usbhid: USB HID core driver [ 1.776245] TCP: cubic registered [ 1.779724] NET: Registered protocol family 17 [ 1.784606] Key type dns_resolver registered [ 1.789520] Power Management for TI OMAP4+ devices. [ 1.794677] Power Management for TI OMAP4. [ 1.798980] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.806427] ThumbEE CPU extension supported. [ 1.806427] Registering SWP/SWPB emulation handler [ 1.816802] vwl1271: 1800 mV [ 1.824035] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.833892] twl 0-0048: PIH (irq 39) nested IRQs [ 1.840240] twl_rtc rtc.15: Enabling TWL-RTC [ 1.847045] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.854095] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.860198] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.866271] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.872344] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.877899] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.883331] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.888336] VDAC: 1800 mV [ 1.888336] VANA: 2100 mV [ 1.895629] VCXIO: 1800 mV [ 1.899017] VUSB: 3300 mV [ 1.902557] V1V8: 1800 mV [ 1.906127] V2V1: 2100 mV [ 1.913818] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.986541] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.138122] hub 1-1:1.0: USB hub found [ 2.142517] hub 1-1:1.0: 5 ports detected [ 2.538238] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.685852] smsc95xx v1.0.4 [ 2.762603] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 72:38:69:10:65:12 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 144.36 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

queue boot: 34 passed 0 failed (queue/v3.14.3)

by Olof's autobooter

Failed boards: Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.14 arndale exynos_defconfig : passed 1:01.37 bbb omap2plus_defconfig : passed 1:31.57 bbb multi_v7_defconfig : passed 1:24.98 beaver tegra_defconfig : passed 0:53.33 beaver multi_v7_defconfig : passed 0:48.73 capri bcm_defconfig : passed 0:41.31 capri multi_v7_defconfig : passed 0:43.37 cubie sunxi_defconfig : passed 1:12.75 cubie multi_v7_defconfig : passed 1:14.04 cubie2 sunxi_defconfig : passed 1:11.19 cubie2 multi_v7_defconfig : passed 1:30.61 cubie2 multi_lpae_defconfig : passed 1:05.58 cubox dove_defconfig : passed 0:53.61 dalmore tegra_defconfig : passed 1:20.78 dalmore multi_v7_defconfig : passed 1:18.65 dalmore multi_lpae_defconfig : passed 1:15.44 hummingboard imx_v6_v7_defconfig : passed 1:20.65 hummingboard multi_v7_defconfig : passed 1:04.16 omap5uevm omap2plus_defconfig : warnings 1:14.23 omap5uevm multi_v7_defconfig : warnings 1:42.70 omap5uevm multi_lpae_defconfig : warnings 1:35.14 panda omap2plus_defconfig : passed 1:13.65 panda multi_v7_defconfig : passed 1:17.71 sama5 sama5_defconfig : passed 1:56.59 seaboard tegra_defconfig : passed 0:57.34 seaboard multi_v7_defconfig : passed 1:11.32 snow exynos_defconfig : passed 1:22.33 snowball u8500_defconfig : passed 1:20.86 snowball multi_v7_defconfig : passed 2:11.29 trimslice tegra_defconfig : passed 0:56.30 trimslice multi_v7_defconfig : passed 1:10.32 wandboard imx_v6_v7_defconfig : passed 1:02.22 wandboard multi_v7_defconfig : passed 1:16.77 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html

10 years, 7 months

queue boot: 9 passed 1 failed (queue/v3.10.39)

by Olof's autobooter

Failed boards: cubie multi_v7_defconfig : FAILED 0:20.96 Successful boards: arndale exynos_defconfig : passed 1:00.04 beaver tegra_defconfig : passed 0:42.28 cubox dove_defconfig : passed 0:58.90 dalmore tegra_defconfig : passed 1:06.37 panda omap2plus_defconfig : passed 1:11.66 sama5 sama5_defconfig : passed 1:53.69 seaboard tegra_defconfig : passed 0:51.51 snow exynos_defconfig : passed 1:25.68 trimslice tegra_defconfig : passed 0:52.36 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie-multi_v7_defconfig failure log: ------------------------------------------------- Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3> ipmi_si: Adding default-specified smic state machine ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9> Trying to free nonexistent resource <0000000000000caa-0000000000000caa> Trying to free nonexistent resource <0000000000000cab-0000000000000cab> ipmi_si: Adding default-specified bt state machine ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0 ipmi_si: Could not set up I/O space Trying to free nonexistent resource <00000000000000e4-00000000000000e4> Trying to free nonexistent resource <00000000000000e5-00000000000000e5> Trying to free nonexistent resource <00000000000000e6-00000000000000e6> ipmi_si: Unable to find any System Interface(s) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A console [ttyS0] enabled usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper usbcore: registered new interface driver usbhid usbhid: USB HID core driver VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 Registering SWP/SWPB emulation handler /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) List of all partitions: No filesystem could mount root, tried: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255) CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.39 #1 [<c0013c0c>] (unwind_backtrace+0x0/0xf4) from [<c00114b0>] (show_stack+0x10/0x14) [<c00114b0>] (show_stack+0x10/0x14) from [<c02765e0>] (panic+0xa0/0x1e8) [<c02765e0>] (panic+0xa0/0x1e8) from [<c0329110>] (mount_block_root+0x294/0x298) [<c0329110>] (mount_block_root+0x294/0x298) from [<c03292c4>] (prepare_namespace+0x14c/0x184) [<c03292c4>] (prepare_namespace+0x14c/0x184) from [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) [<c0328d60>] (kernel_init_freeable+0x1c8/0x1d8) from [<c0272354>] (kernel_init+0x8/0x158) [<c0272354>] (kernel_init+0x8/0x158) from [<c000df18>] (ret_from_fork+0x14/0x3c) ~$off # PYBOOT: Exception: panic

10 years, 7 months

next boot: 29 passed 3 failed (next/next-20140508)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.37 panda multi_v7_defconfig : FAILED 1:34.67 snowball multi_v7_defconfig : FAILED 1:12.42 Successful boards: arndale exynos_defconfig : passed 1:31.24 bbb omap2plus_defconfig : passed 1:32.83 bbb multi_v7_defconfig : passed 1:22.55 beaver tegra_defconfig : passed 0:49.22 beaver multi_v7_defconfig : passed 0:54.35 capri bcm_defconfig : passed 0:44.09 capri multi_v7_defconfig : passed 0:43.94 cubie sunxi_defconfig : passed 1:03.68 cubie multi_v7_defconfig : passed 1:48.52 cubie2 multi_v7_defconfig : passed 1:28.59 cubie2 multi_lpae_defconfig : passed 1:17.50 dalmore tegra_defconfig : passed 1:21.83 dalmore multi_v7_defconfig : passed 1:16.01 dalmore multi_lpae_defconfig : passed 1:19.71 hummingboard imx_v6_v7_defconfig : passed 1:24.45 hummingboard multi_v7_defconfig : passed 1:08.24 omap5uevm omap2plus_defconfig : passed 1:15.78 omap5uevm multi_v7_defconfig : passed 1:47.81 omap5uevm multi_lpae_defconfig : passed 1:38.71 panda omap2plus_defconfig : warnings 1:15.78 sama5 sama5_defconfig : passed 1:52.99 seaboard tegra_defconfig : passed 1:03.41 seaboard multi_v7_defconfig : passed 1:07.98 snow exynos_defconfig : passed 1:32.08 snowball u8500_defconfig : passed 1:17.06 trimslice tegra_defconfig : passed 1:04.98 trimslice multi_v7_defconfig : passed 1:00.55 wandboard imx_v6_v7_defconfig : passed 0:57.19 wandboard multi_v7_defconfig : passed 0:52.40 Offline boards: apc vt8500_v6_v7_defconfig : OFFLINE 1:06.32 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018302] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018324] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018337] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018358] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018370] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019430] Switched to clocksource arch_sys_counter [ 0.026668] NET: Registered protocol family 2 [ 0.027127] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027217] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027337] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027419] TCP: reno registered [ 0.027432] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027488] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027711] NET: Registered protocol family 1 [ 0.028128] RPC: Registered named UNIX socket transport module. [ 0.028142] RPC: Registered udp transport module. [ 0.028148] RPC: Registered tcp transport module. [ 0.028154] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029218] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029882] bounce: pool size: 64 pages [ 0.037790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037815] io scheduler noop registered [ 0.037828] io scheduler deadline registered [ 0.038018] io scheduler cfq registered (default) [ 0.039770] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.081519] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083966] console [ttyS0] disabled [ 0.104160] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.619153] console [ttyS0] enabled [ 0.623982] mousedev: PS/2 mouse device common for all mice [ 0.629901] i2c /dev entries driver [ 0.634729] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643861] TCP: cubic registered [ 0.647193] NET: Registered protocol family 17 [ 0.651775] Registering SWP/SWPB emulation handler [ 0.657585] ahci-5v: 5000 mV [ 0.660868] usb1-vbus: 5000 mV [ 0.664223] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.652679] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.660369] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.667266] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.675170] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.682128] usbcore: registered new interface driver usbhid [ 1.687988] usbhid: USB HID core driver [ 1.696380] TCP: cubic registered [ 1.699859] NET: Registered protocol family 17 [ 1.704711] Key type dns_resolver registered [ 1.709686] Power Management for TI OMAP4+ devices. [ 1.714843] Power Management for TI OMAP4. [ 1.719146] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726318] ThumbEE CPU extension supported. [ 1.726318] Registering SWP/SWPB emulation handler [ 1.737274] vwl1271: 1800 mV [ 1.742156] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.751342] twl 0-0048: PIH (irq 39) nested IRQs [ 1.757019] twl_rtc rtc.15: Power up reset detected. [ 1.762908] twl_rtc rtc.15: Enabling TWL-RTC [ 1.769866] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.776824] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.782928] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.789093] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.795166] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800750] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.806182] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811187] VDAC: 1800 mV [ 1.814941] VANA: 2100 mV [ 1.818542] VCXIO: 1800 mV [ 1.818542] VUSB: 3300 mV [ 1.825500] V1V8: 1800 mV [ 1.829101] V2V1: 2100 mV [ 1.906616] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.168457] hub 1-1:1.0: USB hub found [ 2.172729] hub 1-1:1.0: 5 ports detected [ 2.575469] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.779602] smsc95xx v1.0.4 [ 4.375610] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, 9e:f8:d4:05:00:8f ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.109 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-ZecWs_/tmphEjuZg-uImage tftp 0x01000000 tmp/snowball-ZecWs_/tmphEjuZg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'tmp/snowball-ZecWs_/tmphEjuZg-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4711281 (47e371 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4711217 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next boot: 30 passed 3 failed (next/next-20140507)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.28 panda multi_v7_defconfig : FAILED 1:37.67 snowball multi_v7_defconfig : FAILED 1:10.88 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.88 arndale exynos_defconfig : passed 1:03.81 bbb omap2plus_defconfig : passed 1:32.46 bbb multi_v7_defconfig : passed 1:22.65 beaver tegra_defconfig : passed 0:54.84 beaver multi_v7_defconfig : passed 0:53.23 capri bcm_defconfig : passed 0:43.01 capri multi_v7_defconfig : passed 0:44.89 cubie sunxi_defconfig : passed 1:20.19 cubie multi_v7_defconfig : passed 1:37.77 cubie2 multi_v7_defconfig : passed 1:17.16 cubie2 multi_lpae_defconfig : passed 1:27.75 dalmore tegra_defconfig : passed 1:34.55 dalmore multi_v7_defconfig : passed 1:15.89 dalmore multi_lpae_defconfig : passed 1:17.32 hummingboard imx_v6_v7_defconfig : passed 1:26.72 hummingboard multi_v7_defconfig : passed 1:05.13 omap5uevm omap2plus_defconfig : passed 1:17.52 omap5uevm multi_v7_defconfig : passed 1:45.19 omap5uevm multi_lpae_defconfig : passed 1:49.21 panda omap2plus_defconfig : warnings 1:12.37 sama5 sama5_defconfig : passed 1:51.28 seaboard tegra_defconfig : passed 1:01.34 seaboard multi_v7_defconfig : passed 1:12.40 snow exynos_defconfig : passed 1:30.55 snowball u8500_defconfig : passed 1:18.25 trimslice tegra_defconfig : passed 0:58.76 trimslice multi_v7_defconfig : passed 1:32.39 wandboard imx_v6_v7_defconfig : passed 0:57.36 wandboard multi_v7_defconfig : passed 0:52.58 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018272] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018296] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018308] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018329] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018341] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019392] Switched to clocksource arch_sys_counter [ 0.026662] NET: Registered protocol family 2 [ 0.027134] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027222] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027343] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027424] TCP: reno registered [ 0.027438] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027495] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027719] NET: Registered protocol family 1 [ 0.028129] RPC: Registered named UNIX socket transport module. [ 0.028141] RPC: Registered udp transport module. [ 0.028147] RPC: Registered tcp transport module. [ 0.028153] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029239] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029916] bounce: pool size: 64 pages [ 0.037818] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037841] io scheduler noop registered [ 0.037853] io scheduler deadline registered [ 0.038041] io scheduler cfq registered (default) [ 0.039805] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.081821] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.084288] console [ttyS0] disabled [ 0.104484] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.619468] console [ttyS0] enabled [ 0.624283] mousedev: PS/2 mouse device common for all mice [ 0.630193] i2c /dev entries driver [ 0.635040] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.644193] TCP: cubic registered [ 0.647519] NET: Registered protocol family 17 [ 0.652106] Registering SWP/SWPB emulation handler [ 0.657904] ahci-5v: 5000 mV [ 0.661195] usb1-vbus: 5000 mV [ 0.664554] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.667114] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.675018] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.681915] usbcore: registered new interface driver usbhid [ 1.687774] usbhid: USB HID core driver [ 1.696044] TCP: cubic registered [ 1.699554] NET: Registered protocol family 17 [ 1.704437] Key type dns_resolver registered [ 1.709381] Power Management for TI OMAP4+ devices. [ 1.714538] Power Management for TI OMAP4. [ 1.718872] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.726257] ThumbEE CPU extension supported. [ 1.730743] Registering SWP/SWPB emulation handler [ 1.737030] vwl1271: 1800 mV [ 1.741149] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.751098] twl 0-0048: PIH (irq 39) nested IRQs [ 1.756774] twl_rtc rtc.15: Power up reset detected. [ 1.762939] twl_rtc rtc.15: Enabling TWL-RTC [ 1.769866] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.776855] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.782897] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.789001] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.795104] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.800628] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.806060] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.811523] VDAC: 1800 mV [ 1.811523] VANA: 2100 mV [ 1.818359] VCXIO: 1800 mV [ 1.818359] VUSB: 3300 mV [ 1.825286] V1V8: 1800 mV [ 1.828887] V2V1: 2100 mV [ 1.834869] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.906585] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.067047] gic_timer_retrigger: lost localtimer interrupt [ 2.087677] hub 1-1:1.0: USB hub found [ 2.092254] hub 1-1:1.0: 5 ports detected [ 2.632080] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 3.058929] smsc95xx v1.0.4 [ 3.144439] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, aa:56:69:29:bb:04 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.109 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-mQ4BeR/tmpoB97EB-uImage tftp 0x01000000 tmp/snowball-mQ4BeR/tmpoB97EB-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'tmp/snowball-mQ4BeR/tmpoB97EB-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4711201 (47e321 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4711137 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline boot: 30 passed 3 failed (mainline/v3.15-rc4-298-g9f1eb57)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:18.83 panda multi_v7_defconfig : FAILED 1:35.10 snowball multi_v7_defconfig : FAILED 1:10.27 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.56 arndale exynos_defconfig : passed 1:02.82 bbb omap2plus_defconfig : passed 1:33.62 bbb multi_v7_defconfig : passed 1:21.28 beaver tegra_defconfig : passed 0:49.87 beaver multi_v7_defconfig : passed 0:52.59 capri bcm_defconfig : passed 0:44.70 capri multi_v7_defconfig : passed 0:45.28 cubie sunxi_defconfig : passed 1:03.56 cubie multi_v7_defconfig : passed 1:34.07 cubie2 multi_v7_defconfig : passed 1:42.32 cubie2 multi_lpae_defconfig : passed 1:27.95 dalmore tegra_defconfig : passed 1:24.29 dalmore multi_v7_defconfig : passed 1:20.47 dalmore multi_lpae_defconfig : passed 1:17.78 hummingboard imx_v6_v7_defconfig : passed 1:22.04 hummingboard multi_v7_defconfig : passed 1:07.87 omap5uevm omap2plus_defconfig : warnings 1:16.61 omap5uevm multi_v7_defconfig : warnings 1:44.12 omap5uevm multi_lpae_defconfig : warnings 1:42.13 panda omap2plus_defconfig : warnings 1:15.52 sama5 sama5_defconfig : passed 1:52.42 seaboard tegra_defconfig : passed 1:03.10 seaboard multi_v7_defconfig : passed 1:08.13 snow exynos_defconfig : passed 1:29.27 snowball u8500_defconfig : passed 1:13.00 trimslice tegra_defconfig : passed 0:58.86 trimslice multi_v7_defconfig : passed 1:02.72 wandboard imx_v6_v7_defconfig : passed 0:56.16 wandboard multi_v7_defconfig : passed 0:52.44 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017665] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017692] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017705] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017725] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017737] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018674] Switched to clocksource arch_sys_counter [ 0.025795] NET: Registered protocol family 2 [ 0.026258] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026348] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026469] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026554] TCP: reno registered [ 0.026568] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026625] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026824] NET: Registered protocol family 1 [ 0.027215] RPC: Registered named UNIX socket transport module. [ 0.027227] RPC: Registered udp transport module. [ 0.027233] RPC: Registered tcp transport module. [ 0.027239] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028203] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028750] bounce pool size: 64 pages [ 0.036488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036506] io scheduler noop registered [ 0.036512] io scheduler deadline registered [ 0.036692] io scheduler cfq registered (default) [ 0.038341] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080411] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082828] console [ttyS0] disabled [ 0.103026] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618429] console [ttyS0] enabled [ 0.623140] mousedev: PS/2 mouse device common for all mice [ 0.629015] i2c /dev entries driver [ 0.633818] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642808] TCP: cubic registered [ 0.646129] NET: Registered protocol family 17 [ 0.650695] Registering SWP/SWPB emulation handler [ 0.656408] ahci-5v: 5000 mV [ 0.659696] usb1-vbus: 5000 mV [ 0.663060] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.632019] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.638916] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646820] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653686] usbcore: registered new interface driver usbhid [ 1.659545] usbhid: USB HID core driver [ 1.667510] TCP: cubic registered [ 1.670989] NET: Registered protocol family 17 [ 1.675842] Key type dns_resolver registered [ 1.680816] Power Management for TI OMAP4+ devices. [ 1.685943] Power Management for TI OMAP4. [ 1.690277] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697662] ThumbEE CPU extension supported. [ 1.702148] Registering SWP/SWPB emulation handler [ 1.707855] vwl1271: 1800 mV [ 1.713104] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722290] twl 0-0048: PIH (irq 39) nested IRQs [ 1.727935] twl_rtc rtc.15: Power up reset detected. [ 1.733825] twl_rtc rtc.15: Enabling TWL-RTC [ 1.740844] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.747650] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.753753] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.759826] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.766021] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771545] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.777008] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.782470] VDAC: 1800 mV [ 1.782470] VANA: 2100 mV [ 1.789306] VCXIO: 1800 mV [ 1.789306] VUSB: 3300 mV [ 1.796203] V1V8: 1800 mV [ 1.799774] V2V1: 2100 mV [ 1.888946] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.019439] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 2.052337] hub 1-1:1.0: USB hub found [ 2.056427] hub 1-1:1.0: 5 ports detected [ 2.359436] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.580047] smsc95xx v1.0.4 [ 2.670043] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, e2:12:0c:0e:4d:b3 ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.109 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-G7WltL/tmpNA9__a-uImage tftp 0x01000000 tmp/snowball-G7WltL/tmpNA9__a-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.109 Filename 'tmp/snowball-G7WltL/tmpNA9__a-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4691017 (479449 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690953 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

← Newer
1
...
20
21
22
23
24
25
26
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014