Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

mainline boot: 51 pass, 1 fail (v3.15-rc5)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc5 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 21.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS omap5-uevm 1 min 44.7 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.0 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 49.1 sec: PASS am335x-boneblack 0 min 44.5 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 45.4 sec: PASS (Warnings: 1) omap4-panda 1 min 6.4 sec: PASS omap3-overo-tobi 0 min 23.1 sec: PASS (Warnings: 1) am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 25.3 sec: PASS omap5-uevm 1 min 1.6 sec: PASS (Warnings: 1) omap3-n900 0 min 17.5 sec: PASS (Warnings: 1) legacy,n900 0 min 16.6 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.7 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.9 sec: PASS ste-snowball 1 min 20.8 sec: PASS tegra30-beaver 0 min 19.7 sec: PASS am335x-boneblack 0 min 38.0 sec: PASS omap3-beagle-xm 0 min 49.7 sec: PASS sun7i-a20-cubieboard2 0 min 12.2 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 1 min 2.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.8 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.8 sec: PASS omap3-overo-tobi 0 min 22.4 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap5-uevm 1 min 39.7 sec: PASS (Warnings: 1) omap3-n900 0 min 16.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 16.9 sec: PASS omap4-panda-es 0 min 57.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.7 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.3 sec: PASS exynos5250-arndale 0 min 30.5 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 33.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.38 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

queue boot: 24 passed 5 failed (queue/v3.12.19)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:36.03 bbb multi_v7_defconfig : FAILED 1:38.32 omap5uevm omap2plus_defconfig : FAILED 1:33.58 omap5uevm multi_v7_defconfig : FAILED 1:09.41 omap5uevm multi_lpae_defconfig : FAILED 1:10.44 Successful boards: arndale exynos_defconfig : passed 1:07.40 beaver tegra_defconfig : passed 0:51.64 beaver multi_v7_defconfig : passed 0:40.71 capri bcm_defconfig : passed 0:41.57 capri multi_v7_defconfig : passed 0:42.33 cubie multi_v7_defconfig : passed 1:01.97 cubie2 multi_v7_defconfig : passed 1:07.72 cubie2 multi_lpae_defconfig : passed 1:10.20 cubox dove_defconfig : passed 0:53.96 dalmore tegra_defconfig : passed 1:23.17 dalmore multi_v7_defconfig : passed 1:02.96 dalmore multi_lpae_defconfig : passed 0:59.45 panda omap2plus_defconfig : passed 1:17.20 panda multi_v7_defconfig : passed 1:05.02 sama5 sama5_defconfig : passed 1:55.32 seaboard tegra_defconfig : passed 0:57.99 seaboard multi_v7_defconfig : passed 0:55.17 snow exynos_defconfig : passed 1:26.45 snowball u8500_defconfig : passed 1:22.81 snowball multi_v7_defconfig : passed 0:50.96 trimslice tegra_defconfig : passed 0:54.69 trimslice multi_v7_defconfig : passed 0:53.31 wandboard imx_v6_v7_defconfig : passed 0:51.60 wandboard multi_v7_defconfig : passed 0:45.43 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245347] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.246119] mop500-uib: failed to get adapter i2c2 [ 0.262636] NFS: Registering the id_resolver key type [ 0.262751] Key type id_resolver registered [ 0.262765] Key type id_legacy registered [ 0.263162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.263182] io scheduler noop registered [ 0.263193] io scheduler deadline registered [ 0.263443] io scheduler cfq registered (default) [ 0.264294] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.342292] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.344188] Serial: IMX driver [ 0.345150] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.937065] console [ttyO0] enabled [ 0.941881] serial: Freescale lpuart driver [ 0.946667] [drm] Initialized drm 1.1.0 20060810 [ 0.953627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.960567] ehci-platform: EHCI generic platform driver [ 0.966193] ehci-omap: OMAP-EHCI Host Controller driver [ 0.971825] ehci-orion: EHCI orion driver [ 0.976143] SPEAr-ehci: EHCI SPEAr driver [ 0.980501] tegra-ehci: Tegra EHCI driver [ 0.985078] usbcore: registered new interface driver usb-storage [ 0.992930] mousedev: PS/2 mouse device common for all mice [ 1.000126] sdhci: Secure Digital Host Controller Interface driver [ 1.006737] sdhci: Copyright(c) Pierre Ossman [ 1.011766] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.018739] usbcore: registered new interface driver usbhid [ 1.024660] usbhid: USB HID core driver [ 1.029115] TCP: cubic registered [ 1.033543] NET: Registered protocol family 10 [ 1.039278] sit: IPv6 over IPv4 tunneling driver [ 1.045313] Key type dns_resolver registered [ 1.050010] Registering SWP/SWPB emulation handler [ 1.055900] regulator-dummy: disabling [ 1.061312] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.067311] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.077437] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.832555] Driver for 1-wire Dallas network protocol. [ 1.845169] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.857426] of_get_named_gpio_flags exited with status 53 [ 1.863142] of_get_named_gpio_flags exited with status 54 [ 1.869057] of_get_named_gpio_flags exited with status 55 [ 1.874871] of_get_named_gpio_flags exited with status 56 [ 1.880601] of_get_named_gpio_flags exited with status 53 [ 1.888617] of_get_named_gpio_flags exited with status 54 [ 1.895647] of_get_named_gpio_flags exited with status 55 [ 1.902183] of_get_named_gpio_flags exited with status 56 [ 1.911041] ledtrig-cpu: registered to indicate activity on CPUs [ 1.920048] usbcore: registered new interface driver usbhid [ 1.926127] usbhid: USB HID core driver [ 1.932131] oprofile: no performance counters [ 1.940148] oprofile: using timer interrupt. [ 1.945827] TCP: cubic registered [ 1.949336] Initializing XFRM netlink socket [ 1.953976] NET: Registered protocol family 17 [ 1.958870] NET: Registered protocol family 15 [ 1.964061] Key type dns_resolver registered [ 1.968789] ThumbEE CPU extension supported. [ 1.978471] regulator-dummy: disabling [ 1.999281] DCDC1: at 1500 mV [ 2.006493] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.014695] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.022479] LDO1: at 1800 mV [ 2.028700] LDO2: at 3300 mV [ 2.035870] LDO3: 1800 mV [ 2.041544] LDO4: at 3300 mV [ 2.049250] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.055222] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.124249] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.130692] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.140861] libphy: 4a101000.mdio: probed [ 2.145259] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.155467] Random MACID = 7e:35:ca:6a:b7:54 [ 2.166568] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.180598] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- tftp 0x81000000 queue/v3.12.19/multi_lpae_defconfig/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################## 2.6 MiB/s done Bytes transferred = 3584528 (36b210 hex) U-Boot#setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.19/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.19/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 642.6 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x36b210 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- tftp 0x81000000 queue/v3.12.19/multi_v7_defconfig/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################# 2.6 MiB/s done Bytes transferred = 3568368 (3672f0 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.19/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.19/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 598.6 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3672f0 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################### 2.6 MiB/s done Bytes transferred = 4170936 (3fa4b8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.19/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.19/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.105 Filename 'queue/v3.12.19/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *## 457 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fa4b8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

queue build: 17 warnings 0 failures (queue/v3.12.19)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: 3756888 Linux 3.12.19 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.19/ Runtime: 34m 14s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

10 years, 8 months

next boot: 51 pass, 1 fail (next-20140509)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140509 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 20.9 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.1 sec: PASS omap5-uevm 1 min 35.6 sec: PASS sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 19.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 19.1 sec: PASS imx6q-wandboard 0 min 17.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.9 sec: PASS am335x-boneblack 0 min 44.0 sec: PASS omap3-beagle-xm 1 min 0.8 sec: PASS legacy,3530beagle 0 min 36.6 sec: PASS (Warnings: 1) omap4-panda 1 min 8.3 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.3 sec: PASS omap3-overo-storm-tobi 0 min 21.7 sec: PASS omap5-uevm 1 min 5.9 sec: PASS omap3-n900 0 min 17.1 sec: PASS (Warnings: 1) legacy,n900 0 min 16.8 sec: PASS (Warnings: 1) omap4-panda-es 1 min 11.6 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 16.8 sec: PASS ste-snowball 1 min 20.8 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS am335x-boneblack 0 min 38.0 sec: PASS omap3-beagle-xm 0 min 49.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.5 sec: PASS armada-370-mirabox 0 min 22.4 sec: PASS omap4-panda 0 min 56.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS sun4i-a10-cubieboard 0 min 19.4 sec: PASS bcm28155-ap 0 min 27.8 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.1 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 21.2 sec: PASS omap5-uevm 1 min 42.2 sec: PASS omap3-n900 0 min 16.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.2 sec: PASS omap4-panda-es 0 min 53.6 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 13.0 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.2 sec: PASS exynos5250-arndale 0 min 30.0 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 31.7 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.2 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

stable boot: 37 pass, 4 fail (v3.12.19)

by Kevin's boot bot

Tree/Branch: stable Git describe: v3.12.19 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y am335x-boneblack: FAIL: arm-omap2plus_defconfig am335x-boneblack: FAIL: arm-multi_v7_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 16.3 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 23.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.0 sec: PASS omap5-uevm 1 min 18.3 sec: FAIL sun7i-a20-cubieboard2 0 min 31.4 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 17.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.5 sec: PASS imx6q-wandboard 0 min 16.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 48.8 sec: PASS am335x-boneblack 1 min 48.8 sec: FAIL omap3-beagle-xm 0 min 55.8 sec: PASS legacy,3530beagle 0 min 41.6 sec: PASS omap4-panda 1 min 12.9 sec: PASS omap3-tobi 0 min 21.5 sec: PASS am335x-bone 0 min 26.5 sec: PASS legacy,n900 0 min 15.7 sec: PASS omap4-panda-es 1 min 9.5 sec: PASS legacy,3730storm 0 min 23.7 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS arm-multi_v7_defconfig ---------------------- ste-snowball 0 min 26.0 sec: PASS tegra30-beaver 0 min 20.7 sec: PASS am335x-boneblack 0 min 42.2 sec: FAIL omap3-beagle-xm 0 min 57.8 sec: PASS sun7i-a20-cubieboard2 0 min 13.5 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS omap4-panda 1 min 5.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS sun4i-a10-cubieboard 0 min 18.6 sec: PASS bcm28155-ap 0 min 25.0 sec: PASS imx6dl-wandboard,wand-solo 0 min 17.1 sec: PASS omap3-tobi 0 min 20.1 sec: PASS am335x-bone 0 min 33.7 sec: PASS imx6q-wandboard 0 min 16.1 sec: PASS omap4-panda-es 1 min 5.8 sec: PASS imx6dl-wandboard,wand-dual 0 min 17.4 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.3 sec: PASS arm-exynos_defconfig -------------------- exynos5250-arndale 0 min 29.6 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 36.4 sec: PASS arm-da8xx_omapl_defconfig ------------------------- da850-evm 0 min 14.6 sec: PASS legacy,da850evm 0 min 13.8 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.3 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- omap5-uevm: FAIL: last 80 lines of boot log: -------------------------------------------- if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/012 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 192.168.1.201 U-Boot# setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x81000000 192.168.1.2:tmp/omap5uevm-4bY1yR/zImage tftp 0x81000000 192.168.1.2:tmp/omap5uevm-4bY1yR/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-4bY1yR/zImage'. Load address: 0x81000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################### 392.6 KiB/s done Bytes transferred = 3610968 (371958 hex) U-Boot# tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x82000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x82000000 Loading: *T ############################################ 86.9 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot#tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-4bY1yR/omap5-uevm.dtb tftp 0x81f00000 192.168.1.2:tmp/omap5uevm-4bY1yR/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.201 Filename 'tmp/omap5uevm-4bY1yR/omap5-uevm.dtb'. Load address: 0x81f00000 Loading: *T ## 2 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.201:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x81000000 0x82000000 0x81f00000 bootz 0x81000000 0x82000000 0x81f00000 Kernel image @ 0x81000000 [ 0x000000 - 0x371958 ] ## Loading init Ramdisk from Legacy Image at 82000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f0757c Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.26 seconds. # PYBOOT: Result: FAIL sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: OFFLINE arm-omap2plus_defconfig ----------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- [ 0.645646] RPC: Registered udp transport module. [ 0.645663] RPC: Registered tcp transport module. [ 0.645679] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.647049] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.892735] VFS: Disk quotas dquot_6.5.2 [ 0.893081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.896377] NFS: Registering the id_resolver key type [ 0.896964] Key type id_resolver registered [ 0.896994] Key type id_legacy registered [ 0.897164] jffs2: version 2.2. (NAND) (SUMMARY) B) 2001-2006 Red Hat, Inc. [ 0.897854] msgmni has been set to 985 [ 0.903101] io scheduler noop registered [ 0.903135] io scheduler deadline registered [ 0.903230] io scheduler cfq registered (default) [ 0.905057] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.910943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.921813] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 1.537799] console [ttyO0] enabled [ 1.587171] brd: module loaded [ 1.616120] loop: module loaded [ 1.629032] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.646856] usbcore: registered new interface driver asix [ 1.653885] usbcore: registered new interface driver ax88179_178a [ 1.661592] usbcore: registered new interface driver cdc_ether [ 1.668570] usbcore: registered new interface driver r815x [ 1.675017] usbcore: registered new interface driver smsc95xx [ 1.682050] usbcore: registered new interface driver net1080 [ 1.688819] usbcore: registered new interface driver cdc_subset [ 1.695648] usbcore: registered new interface driver zaurus [ 1.702402] usbcore: registered new interface driver cdc_ncm [ 1.711287] usbcore: registered new interface driver cdc_wdm [ 1.717971] usbcore: registered new interface driver usb-storage [ 1.725406] usbcore: registered new interface driver usbtest [ 1.734576] mousedev: PS/2 mouse device common for all mice [ 1.748554] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.757804] i2c /dev entries driver [ 1.762654] Driver for 1-wire Dallas network protocol. [ 1.774944] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.794288] ledtrig-cpu: registered to indicate activity on CPUs [ 1.803426] usbcore: registered new interface driver usbhid [ 1.809499] usbhid: USB HID core driver [ 1.815548] oprofile: no performance counters [ 1.823488] oprofile: using timer interrupt. [ 1.829191] TCP: cubic registered [ 1.832698] Initializing XFRM netlink socket [ 1.837336] NET: Registered protocol family 17 [ 1.842221] NET: Registered protocol family 15 [ 1.847418] Key type dns_resolver registered [ 1.852169] ThumbEE CPU extension supported. [ 1.861902] regulator-dummy: disabling [ 1.882538] DCDC1: at 1500 mV [ 1.889149] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 1.897028] vdd_core: 925 <--> 1150 mV at 1100 mV [ 1.905359] LDO1: at 1800 mV [ 1.911611] LDO2: at 3300 mV [ 1.918986] LDO3: 1800 mV [ 1.924707] LDO4: at 3300 mV [ 1.931065] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.936801] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.008388] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.014830] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.024921] libphy: 4a101000.mdio: probed [ 2.029310] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.039517] Random MACID = ca:9d:5d:e1:2e:73 [ 2.051899] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.064053] net eth0: initializing cpsw version 1.12 (0) [ 2.072233] net eth0: phy found : id is : 0x7c0f1 [ 2.077236] libphy: PHY 4a101000.mdio:01 not found [ 2.082351] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 5.148870] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 5.168925] IP-Config: Complete: [ 5.172351] device=eth0, hwaddr=ca:9d:5d:e1:2e:73, ipaddr=192.168.1.150, mask=255.255.255.0, gw=192.168.1.254 [ 5.183337] host=192.168.1.150, domain=, nis-domain=(none) [ 5.189658] bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= [ 5.196711] nameserver0=192.168.1.254 [ 5.205487] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.84 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- am335x-boneblack: FAIL: last 80 lines of boot log: -------------------------------------------------- musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 OMAP SD/MMC: 0 mmc_send_cmd : timeout: No status update reading u-boot.img reading u-boot.img U-Boot 2013.04-dirty (May 20 2013 - 14:30:06) I2C: ready DRAM: 512 MiB WARNING: Caches not enabled NAND: No NAND device found!!! 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Peripheral mode controller at 47401000 using PIO, IRQ 0 musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn) musb-hdrc: MHDRC RTL version 2.0 musb-hdrc: setup fifo_mode 4 musb-hdrc: 28/31 max ep, 16384/16384 memory USB Host mode controller at 47401800 using PIO, IRQ 0 Net: <ethaddr> not set. Validating first E-fuse MAC Phy not found PHY reset timed out cpsw, usb_ether Hit any key to stop autoboot: 1 0 U-Boot# U-Boot#version version U-Boot 2013.04-dirty (May 20 2013 - 14:30:06) arm-angstrom-linux-gnueabi-gcc (Linaro GCC 4.7-2013.02-01) 4.7.3 20130205 (prerelease) GNU ld (GNU Binutils) 2.22 U-Boot# setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 setenv bootargs console=ttyO0,115200n8 earlyprintk rw root=/dev/mmcblk0p2 rootwait rootfstype=ext4 U-Boot#setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' setenv netargs 'setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.254' U-Boot# if test -n ${initenv}; then run initenv; fi if test -n ${initenv}; then run initenv; fi U-Boot# if test -n ${preboot}; then run preboot; fi if test -n ${preboot}; then run preboot; fi U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp link up on port 0, speed 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 dhcp Retry count exceeded; starting again using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in MAC c8:a0:30:b4:18:a4 HOST MAC de:ad:be:af:00:00 RNDIS ready ~$off # PYBOOT: Exception: u-boot: ERROR: DHCP retry count exceeded. # PYBOOT: Time: 42.21 seconds. # PYBOOT: Result: FAIL

10 years, 8 months

next boot: 31 passed 2 failed (next/next-20140509)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:20.73 snowball multi_v7_defconfig : FAILED 1:16.06 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:19.26 arndale exynos_defconfig : passed 1:09.20 bbb omap2plus_defconfig : passed 1:38.82 bbb multi_v7_defconfig : passed 1:15.86 beaver tegra_defconfig : passed 0:58.39 beaver multi_v7_defconfig : passed 0:59.32 capri bcm_defconfig : passed 0:42.66 capri multi_v7_defconfig : passed 0:44.79 cubie sunxi_defconfig : passed 1:02.63 cubie multi_v7_defconfig : passed 1:08.21 cubie2 multi_v7_defconfig : passed 1:06.94 cubie2 multi_lpae_defconfig : passed 1:12.22 dalmore tegra_defconfig : passed 1:27.09 dalmore multi_v7_defconfig : passed 1:21.55 dalmore multi_lpae_defconfig : passed 1:20.97 hummingboard imx_v6_v7_defconfig : passed 1:20.99 hummingboard multi_v7_defconfig : passed 1:05.59 omap5uevm omap2plus_defconfig : passed 1:07.36 omap5uevm multi_v7_defconfig : passed 1:46.51 omap5uevm multi_lpae_defconfig : passed 1:44.19 panda omap2plus_defconfig : warnings 1:12.14 panda multi_v7_defconfig : passed 1:24.87 sama5 sama5_defconfig : passed 1:56.56 seaboard tegra_defconfig : passed 1:01.71 seaboard multi_v7_defconfig : passed 1:09.22 snow exynos_defconfig : passed 1:29.04 snowball u8500_defconfig : passed 1:16.52 trimslice tegra_defconfig : passed 0:58.41 trimslice multi_v7_defconfig : passed 1:00.22 wandboard imx_v6_v7_defconfig : passed 0:59.27 wandboard multi_v7_defconfig : passed 0:50.33 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.018272] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.018295] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.018309] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.018329] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.018342] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.019373] Switched to clocksource arch_sys_counter [ 0.026485] NET: Registered protocol family 2 [ 0.026951] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.027040] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.027160] TCP: Hash tables configured (established 8192 bind 8192) [ 0.027247] TCP: reno registered [ 0.027262] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.027319] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.027539] NET: Registered protocol family 1 [ 0.027960] RPC: Registered named UNIX socket transport module. [ 0.027973] RPC: Registered udp transport module. [ 0.027980] RPC: Registered tcp transport module. [ 0.027986] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.029048] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.029723] bounce: pool size: 64 pages [ 0.037545] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.037571] io scheduler noop registered [ 0.037585] io scheduler deadline registered [ 0.037772] io scheduler cfq registered (default) [ 0.039542] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080784] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.083200] console [ttyS0] disabled [ 0.103392] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618382] console [ttyS0] enabled [ 0.623181] mousedev: PS/2 mouse device common for all mice [ 0.629039] i2c /dev entries driver [ 0.633922] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.643048] TCP: cubic registered [ 0.646378] NET: Registered protocol family 17 [ 0.650960] Registering SWP/SWPB emulation handler [ 0.656733] ahci-5v: 5000 mV [ 0.660031] usb1-vbus: 5000 mV [ 0.663388] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 2 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.111 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-Ui0aLn/tmpP0sMYs-uImage tftp 0x01000000 tmp/snowball-Ui0aLn/tmpP0sMYs-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'tmp/snowball-Ui0aLn/tmpP0sMYs-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################# done Bytes transferred = 4712137 (47e6c9 hex) U8500 $printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4712073 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

next build: 382 warnings 1 failures (next/next-20140509)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 9f072b9 Add linux-next specific files for 20140509 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140509/ Runtime: 42m 35s Passed: 123 Failed: 1 Warnings: 382 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: exynos_defconfig ------------------------------------------------------------------------------- Errors: exynos_defconfig: arch/arm/boot/dts/exynos5260.dtsi:14:46: fatal error: dt-bindings/clock/exynos5260-clk.h: No such file or directory Warnings: 1 arch/arm/mach-exynos/exynos.c:263:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 12 sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 12 sound/soc/soc-core.c:1682:4: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default] 25 kernel/events/core.c:7434:35: warning: unused variable 'tmp' [-Wunused-variable] 104 include/linux/bitops.h:48) [-Wdeprecated-declarations] 111 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 111 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128e8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x128f8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12900): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28388): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28390): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28398): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283a8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283b8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283c8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283d8): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x283e0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 8 months

OMAP baseline test results for v3.15-rc4

by Paul Walmsley

Here are some basic OMAP test results for Linux v3.15-rc4. Logs and other details at: http://www.pwsan.com/omap/testlogs/test_v3.15-rc4/20140505112251/ Test summary ------------ Build: uImage+dtb: Pass ( 9/ 9): omap2plus_defconfig_am33xx_only/am335x-bone, omap2plus_defconfig/omap4-panda, omap2plus_defconfig/omap4-panda-es, omap2plus_defconfig/am3517-evm, omap2plus_defconfig/omap2430-sdp, omap2plus_defconfig/omap3-beagle, omap2plus_defconfig/omap3-beagle-xm, omap2plus_defconfig/omap3-evm-37xx, omap2plus_defconfig/omap4-var-som Build: zImage: Pass (14/14): multi_v7_defconfig, omap2plus_defconfig, omap2plus_defconfig_am33xx_only, omap2plus_defconfig_2430sdp_only, omap2plus_defconfig_cpupm, omap2plus_defconfig_no_pm, omap2plus_defconfig_n800_only_a, omap2plus_defconfig_n800_multi_omap2xxx, omap2plus_defconfig_omap2_4_only, omap2plus_defconfig_omap3_4_only, rmk_omap3430_ldp_allnoconfig, rmk_omap3430_ldp_oldconfig, rmk_omap4430_sdp_allnoconfig, rmk_omap4430_sdp_oldconfig Build: uImage: Pass ( 3/ 3): omap1_defconfig, omap1_defconfig_1510innovator_only, omap1_defconfig_5912osk_only Boot to userspace: FAIL ( 1/12): 2430sdp skip ( 3/12): 5912osk, cmt3517, 4460varsomom Pass ( 8/12): 3517evm, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes, am335xbone, am335xbonelt PM: chip retention via suspend: skip ( 1/ 7): 4460varsomom FAIL ( 2/ 7): 2430sdp, 4430es2panda Pass ( 4/ 7): 3530es3beagle, 3730beaglexm, 37xxevm, 4460pandaes PM: chip retention via dynamic idle: skip ( 1/ 7): 4460varsomom FAIL ( 6/ 7): 2430sdp, 3530es3beagle, 3730beaglexm, 37xxevm, 4430es2panda, 4460pandaes PM: chip off except CORE via suspend: FAIL ( 1/ 1): 3730beaglexm PM: chip off except CORE via dynamic idle: FAIL ( 1/ 1): 3730beaglexm PM: chip off via suspend: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes PM: chip off via dynamic idle: skip ( 1/ 5): 4460varsomom FAIL ( 4/ 5): 3530es3beagle, 37xxevm, 4430es2panda, 4460pandaes vmlinux object size (delta in bytes from test_v3.15-rc3 (d1db0eea852497762cab43b905b879dfcd3b8987)): text data bss total kernel +216 0 0 +216 omap1_defconfig +248 0 0 +248 omap1_defconfig_1510innovator_only +216 0 0 +216 omap1_defconfig_5912osk_only +364 +8 0 +372 multi_v7_defconfig +448 0 0 +448 omap2plus_defconfig +304 0 0 +304 omap2plus_defconfig_2430sdp_only +512 +8 0 +520 omap2plus_defconfig_am33xx_only +512 +8 0 +520 omap2plus_defconfig_am43xx_only +448 0 0 +448 omap2plus_defconfig_cpupm +512 +8 0 +520 omap2plus_defconfig_dra7xx_only +420 +8 +4 +432 omap2plus_defconfig_n800_multi_omap2xxx +388 0 +4 +392 omap2plus_defconfig_n800_only_a +512 +8 0 +520 omap2plus_defconfig_no_pm +384 0 0 +384 omap2plus_defconfig_omap2_4_only +512 0 0 +512 omap2plus_defconfig_omap3_4_only +512 0 0 +512 omap2plus_defconfig_omap5_only +336 0 0 +336 rmk_omap3430_ldp_allnoconfig +352 +8 0 +360 rmk_omap3430_ldp_oldconfig +352 0 -16 +336 rmk_omap4430_sdp_allnoconfig +392 -8 0 +384 rmk_omap4430_sdp_oldconfig Boot-time memory difference (delta in bytes from test_v3.15-rc3 (d1db0eea852497762cab43b905b879dfcd3b8987)) avail rsrvd high freed board kconfig -1007432k -40120k -269312k -388k 4460varsomom omap2plus_defconfig The eMMC on the 4460 VAR-SOM-OM has failed; I guess it's run out of reserve blocks to reallocate. Now it's time to find yet another way to boot it.

10 years, 8 months

mainline boot: 51 pass, 1 fail (v3.15-rc4-320-gafcf0a2)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc4-320-gafcf0a2 Failed boot tests (console logs at the end) =========================================== sun7i-a20-cubieboard2: OFFLINE: arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.7 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 23.8 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.0 sec: PASS omap5-uevm 1 min 37.3 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 31.7 sec: OFFLINE arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.7 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.0 sec: PASS am335x-boneblack 0 min 44.0 sec: PASS omap3-beagle-xm 0 min 59.5 sec: PASS legacy,3530beagle 0 min 44.1 sec: PASS (Warnings: 1) omap4-panda 1 min 10.5 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 27.5 sec: PASS omap3-overo-storm-tobi 0 min 24.8 sec: PASS omap5-uevm 0 min 59.8 sec: PASS (Warnings: 1) omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 16.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 10.1 sec: PASS legacy,3730storm 0 min 23.0 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.2 sec: PASS ste-snowball 1 min 18.8 sec: PASS tegra30-beaver 0 min 23.9 sec: PASS am335x-boneblack 0 min 38.0 sec: PASS omap3-beagle-xm 0 min 47.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.4 sec: PASS armada-370-mirabox 0 min 22.6 sec: PASS omap4-panda 0 min 58.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.6 sec: PASS sun4i-a10-cubieboard 0 min 19.3 sec: PASS bcm28155-ap 0 min 27.8 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 18.4 sec: PASS am335x-bone 0 min 26.8 sec: PASS omap3-overo-storm-tobi 0 min 24.1 sec: PASS omap5-uevm 1 min 40.4 sec: PASS (Warnings: 1) omap3-n900 0 min 16.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.0 sec: PASS omap4-panda-es 0 min 50.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.8 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.2 sec: PASS exynos5250-arndale 0 min 29.9 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 30.5 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 23.0 sec: PASS armada-370-mirabox 0 min 20.4 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.1 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- sun7i-a20-cubieboard2: OFFLINE: last 80 lines of boot log: ---------------------------------------------------------- Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected ~$hardreset Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on 0 sun7i# ~$off # PYBOOT: Exception: ('ERROR: Could not break into u-boot.', 'OFFLINE') # PYBOOT: Time: 31.67 seconds. # PYBOOT: Result: OFFLINE

10 years, 8 months

mainline boot: 30 passed 3 failed (mainline/v3.15-rc4-320-gafcf0a2)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.89 panda multi_v7_defconfig : FAILED 1:41.21 snowball multi_v7_defconfig : FAILED 1:11.36 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.51 arndale exynos_defconfig : passed 1:07.75 bbb omap2plus_defconfig : passed 1:39.47 bbb multi_v7_defconfig : passed 1:20.60 beaver tegra_defconfig : passed 0:58.39 beaver multi_v7_defconfig : passed 0:51.53 capri bcm_defconfig : passed 0:44.13 capri multi_v7_defconfig : passed 0:45.17 cubie sunxi_defconfig : passed 0:59.43 cubie multi_v7_defconfig : passed 1:12.36 cubie2 multi_v7_defconfig : passed 1:11.44 cubie2 multi_lpae_defconfig : passed 1:01.13 dalmore tegra_defconfig : passed 1:27.41 dalmore multi_v7_defconfig : passed 1:16.91 dalmore multi_lpae_defconfig : passed 1:20.39 hummingboard imx_v6_v7_defconfig : passed 1:19.81 hummingboard multi_v7_defconfig : passed 1:09.27 omap5uevm omap2plus_defconfig : warnings 1:16.69 omap5uevm multi_v7_defconfig : warnings 1:44.83 omap5uevm multi_lpae_defconfig : warnings 1:40.48 panda omap2plus_defconfig : warnings 1:20.11 sama5 sama5_defconfig : passed 1:53.07 seaboard tegra_defconfig : passed 0:59.65 seaboard multi_v7_defconfig : passed 1:14.31 snow exynos_defconfig : passed 1:31.77 snowball u8500_defconfig : passed 1:27.28 trimslice tegra_defconfig : passed 0:59.43 trimslice multi_v7_defconfig : passed 1:03.35 wandboard imx_v6_v7_defconfig : passed 0:58.48 wandboard multi_v7_defconfig : passed 0:58.75 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.017697] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017720] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017733] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017752] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017764] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018720] Switched to clocksource arch_sys_counter [ 0.025860] NET: Registered protocol family 2 [ 0.026318] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026406] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026527] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026608] TCP: reno registered [ 0.026622] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026679] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026881] NET: Registered protocol family 1 [ 0.027275] RPC: Registered named UNIX socket transport module. [ 0.027293] RPC: Registered udp transport module. [ 0.027299] RPC: Registered tcp transport module. [ 0.027305] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028278] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028831] bounce pool size: 64 pages [ 0.036579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036596] io scheduler noop registered [ 0.036602] io scheduler deadline registered [ 0.036780] io scheduler cfq registered (default) [ 0.038422] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.080478] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.082925] console [ttyS0] disabled [ 0.103127] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.618535] console [ttyS0] enabled [ 0.623266] mousedev: PS/2 mouse device common for all mice [ 0.629150] i2c /dev entries driver [ 0.633943] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.642947] TCP: cubic registered [ 0.646268] NET: Registered protocol family 17 [ 0.650830] Registering SWP/SWPB emulation handler [ 0.656554] ahci-5v: 5000 mV [ 0.659844] usb1-vbus: 5000 mV [ 0.663204] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout ======================================================================== Board panda-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.631988] omap_hsmmc 480d5000.mmc: unable to get vmmc regulator -517 [ 1.638885] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646759] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.653625] usbcore: registered new interface driver usbhid [ 1.659484] usbhid: USB HID core driver [ 1.667449] TCP: cubic registered [ 1.670959] NET: Registered protocol family 17 [ 1.675781] Key type dns_resolver registered [ 1.680755] Power Management for TI OMAP4+ devices. [ 1.685913] Power Management for TI OMAP4. [ 1.690216] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.697601] ThumbEE CPU extension supported. [ 1.702087] Registering SWP/SWPB emulation handler [ 1.708160] vwl1271: 1800 mV [ 1.712493] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.722229] twl 0-0048: PIH (irq 39) nested IRQs [ 1.727844] twl_rtc rtc.15: Power up reset detected. [ 1.733734] twl_rtc rtc.15: Enabling TWL-RTC [ 1.740570] twl_rtc rtc.15: rtc core: registered rtc.15 as rtc0 [ 1.747497] VAUX1_6030: 1000 <--> 3000 mV at 2800 mV [ 1.753601] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.759704] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.765747] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.771301] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.776702] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.781707] VDAC: 1800 mV [ 1.781707] VANA: 2100 mV [ 1.788970] VCXIO: 1800 mV [ 1.792053] VUSB: 3300 mV [ 1.795928] V1V8: 1800 mV [ 1.799468] V2V1: 2100 mV [ 1.805511] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.879241] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.040771] hub 1-1:1.0: USB hub found [ 2.045104] hub 1-1:1.0: 5 ports detected [ 2.129547] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.169647] gic_timer_retrigger: lost localtimer interrupt [ 2.428253] usb 1-1.1: new high-speed USB device number 3 using ehci-omap ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.110 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-d_bdyw/tmp5kKHjK-uImage tftp 0x01000000 tmp/snowball-d_bdyw/tmp5kKHjK-uImage smc911x: detected LAN9221 controller node: snowball status: on smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'tmp/snowball-d_bdyw/tmp5kKHjK-uImage'. Load address: 0x1000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4690441 (479209 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4690377 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 8 months

← Newer
1
...
19
20
21
22
23
24
25
...
30
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014