Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

mainline boot: 52 pass, 0 fail (v3.15-rc7-35-g758b671)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc7-35-g758b671 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.4 sec: PASS da850-evm 0 min 19.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 44.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 29.3 sec: PASS omap5-uevm 1 min 46.2 sec: PASS sun7i-a20-cubieboard2 0 min 16.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 22.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 23.0 sec: PASS imx6q-wandboard 0 min 21.2 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 56.7 sec: PASS am335x-boneblack 0 min 29.9 sec: PASS omap3-beagle-xm 1 min 5.4 sec: PASS legacy,3530beagle 0 min 43.3 sec: PASS (Warnings: 1) omap4-panda 1 min 18.9 sec: PASS omap3-overo-tobi 0 min 27.5 sec: PASS (Warnings: 1) am335x-bone 0 min 31.5 sec: PASS omap3-overo-storm-tobi 0 min 29.4 sec: PASS omap5-uevm 1 min 8.7 sec: PASS omap3-n900 0 min 21.4 sec: PASS (Warnings: 1) legacy,n900 0 min 21.2 sec: PASS (Warnings: 1) omap4-panda-es 1 min 18.0 sec: PASS legacy,3730storm 0 min 26.8 sec: PASS legacy,3530overo 0 min 25.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 23.2 sec: PASS ste-snowball 1 min 22.1 sec: PASS tegra30-beaver 0 min 23.4 sec: PASS am335x-boneblack 0 min 28.1 sec: PASS omap3-beagle-xm 0 min 54.3 sec: PASS sun7i-a20-cubieboard2 0 min 16.5 sec: PASS armada-370-mirabox 0 min 26.5 sec: PASS omap4-panda 1 min 0.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 30.0 sec: PASS sun4i-a10-cubieboard 0 min 18.5 sec: PASS bcm28155-ap 0 min 30.1 sec: PASS omap3-overo-tobi 0 min 26.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 22.2 sec: PASS am335x-bone 0 min 30.8 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 1 min 41.9 sec: PASS omap3-n900 0 min 20.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 20.9 sec: PASS omap4-panda-es 0 min 58.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 22.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.9 sec: PASS sun4i-a10-cubieboard 0 min 19.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 27.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.6 sec: PASS exynos5250-arndale 0 min 32.5 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 38.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.5 sec: PASS armada-370-mirabox 0 min 24.6 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 36.2 sec: PASS

10 years, 6 months

mainline boot: 27 passed 4 failed (mainline/v3.15-rc7-35-g758b671)

by Olof's autobooter

Failed boards: arndale exynos_defconfig : FAILED 1:38.08 cubox multi_v7_defconfig : FAILED 1:39.55 sama5 sama5_defconfig : FAILED 1:04.34 snow exynos_defconfig : FAILED 1:09.05 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.74 bbb omap2plus_defconfig : passed 1:36.34 bbb multi_v7_defconfig : passed 1:11.87 beaver tegra_defconfig : passed 0:56.80 capri bcm_defconfig : passed 0:39.10 capri multi_v7_defconfig : passed 0:41.35 cubie sunxi_defconfig : passed 1:10.48 cubie multi_v7_defconfig : passed 1:26.58 cubie2 sunxi_defconfig : passed 1:21.25 cubie2 multi_v7_defconfig : passed 1:37.25 cubie2 multi_lpae_defconfig : passed 1:26.56 dalmore tegra_defconfig : passed 1:28.70 dalmore multi_v7_defconfig : passed 1:25.88 dalmore multi_lpae_defconfig : passed 1:28.99 hummingboard imx_v6_v7_defconfig : passed 1:27.17 hummingboard multi_v7_defconfig : passed 1:12.14 omap5uevm omap2plus_defconfig : passed 1:03.53 omap5uevm multi_v7_defconfig : passed 2:05.15 omap5uevm multi_lpae_defconfig : passed 1:52.04 seaboard tegra_defconfig : passed 1:11.43 seaboard multi_v7_defconfig : passed 1:16.39 snowball u8500_defconfig : passed 2:04.42 snowball multi_v7_defconfig : passed 4:29.44 trimslice tegra_defconfig : passed 1:07.50 trimslice multi_v7_defconfig : passed 1:06.56 wandboard imx_v6_v7_defconfig : passed 1:09.99 wandboard multi_v7_defconfig : passed 1:04.84 Offline boards: beaver multi_v7_defconfig : OFFLINE 1:14.97 panda omap2plus_defconfig : OFFLINE 1:12.89 panda multi_v7_defconfig : OFFLINE 1:14.01 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-exynos_defconfig failure log: ------------------------------------------------- Load address: 0x40800000 Loading: *T ################################################################# ################################################################# ############################################################# done Bytes transferred = 2791216 (2a9730 hex) ARNDALE5250 # setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 ARNDALE5250 # tftp 0x407c0000 mainline/v3.15-rc7-35-g758b671/exynos_defconfig/dtbs/exynos5250-arndale.dtb tftp 0x407c0000 mainline/v3.15-rc7-35-g758b671/exynos_defconfig/dtbs/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.187 Filename 'mainline/v3.15-rc7-35-g758b671/exynos_defconfig/dtbs/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *T ### done Bytes transferred = 34237 (85bd hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=ttySAC2,115200n8 earlyprintk debug root=/dev/mmcblk0p1 rootwait rw ARNDALE5250 # bootm 0x40800000 - 0x407c0000 bootm 0x40800000 - 0x407c0000 ## Booting kernel from Legacy Image at 40800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2791152 Bytes = 2.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff4000, end 4ffff5bc ... OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.203368] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.211529] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232888] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.240037] hub 1-0:1.0: USB hub found [ 1.243830] hub 1-0:1.0: 1 port detected [ 1.248154] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254018] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262143] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282885] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289959] hub 2-0:1.0: USB hub found [ 1.293746] hub 2-0:1.0: 1 port detected [ 1.298071] SPEAr-ehci: EHCI SPEAr driver [ 1.302165] tegra-ehci: Tegra EHCI driver [ 1.306741] usbcore: registered new interface driver usb-storage [ 1.314079] mousedev: PS/2 mouse device common for all mice [ 1.320815] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329989] i2c /dev entries driver [ 1.335082] usbcore: registered new interface driver uvcvideo [ 1.340799] USB Video Class driver (1.1.1) [ 1.344907] gspca_main: v2.14.0 registered [ 1.352589] orion_wdt: Initial timeout 25 sec [ 1.357646] sdhci: Secure Digital Host Controller Interface driver [ 1.363808] sdhci: Copyright(c) Pierre Ossman [ 1.368632] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374875] usbcore: registered new interface driver usbhid [ 1.380422] usbhid: USB HID core driver [ 1.387147] TCP: cubic registered [ 1.390447] NET: Registered protocol family 17 [ 1.395093] Key type dns_resolver registered [ 1.399518] ThumbEE CPU extension supported. [ 1.403810] Registering SWP/SWPB emulation handler [ 1.408582] PJ4 iWMMXt v2 coprocessor enabled. [ 1.414058] USB Power: 5000 mV [ 1.417539] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-27 22:35:05 UTC (1401230105) [ 1.428001] ALSA device list: [ 1.430957] No soundcards found. [ 1.435046] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440614] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- Using gmacb0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.199 Filename 'mainline/v3.15-rc7-35-g758b671/sama5_defconfig/dtbs/sama5d35ek.dtb'. Load address: 0x21000000 Loading: *## done Bytes transferred = 27966 (6d3e hex) U-Boot> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> printenv bootargs printenv bootargs bootargs=console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rw U-Boot> bootm 0x22000000 - 0x21000000 bootm 0x22000000 - 0x21000000 ## Booting kernel from Legacy Image at 22000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3032656 Bytes = 2.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 21000000 Booting using the fdt blob at 0x21000000 Loading Kernel Image ... OK OK Loading Device Tree to 3fd81000, end 3fd8ad3d ... OK Starting kernel ... undefined instruction pc : [<00008008>] lr : [<3fead584>] sp : 3fd8bdc0 ip : 00000007 fp : 00000000 r10: 3fef0c80 r9 : 00000000 r8 : 3fd8bf50 r7 : 3fef0678 r6 : 00000000 r5 : 00008000 r4 : 3fef0c80 r3 : 00006d3e r2 : 3fd81000 r1 : 00000d2d r0 : 00000000 Flags: nzCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-exynos_defconfig failure log: ------------------------------------------------- OK Loading Device Tree to 5fff0000, end 5ffffa3a ... OK Starting kernel ... Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,698,340 1,598,340 board_init_f 1,748,185 49,845 board_init_r 1,750,391 2,206 board_init 1,881,150 130,759 board_init_done 1,963,443 82,293 id=64 1,968,875 5,432 main_loop 3,156,534 1,187,659 usb_start 6,099,962 2,943,428 tftp_start 6,099,981 19 id=80 6,099,982 1 eth_start 17,996,158 11,896,176 id=81 17,996,242 84 id=82 17,996,248 6 id=84 17,996,249 1 tftp_done 21,776,213 3,779,964 bootm_start 21,776,221 8 id=1 21,856,177 79,956 id=2 21,856,196 19 id=3 22,641,008 784,812 id=4 22,641,009 1 id=5 22,641,021 12 id=6 23,572,248 931,227 id=7 23,572,251 3 id=8 23,572,264 13 id=15 24,142,463 570,199 start_kernel Accumulated time: 154,610 lcd Stashed 27 records ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc7-35-g758b671)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 758b671 Merge tag 'fixes-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc7-35-g758b671/ Runtime: 41m 58s Passed: 124 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 6 months

arm-soc boot: 34 passed 2 failed (arm-soc/v3.15-rc6-1189-gf3246fd)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:31.34 snowball multi_v7_defconfig : FAILED 1:14.87 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.96 arndale exynos_defconfig : passed 1:23.02 bbb omap2plus_defconfig : passed 1:34.71 beaver tegra_defconfig : passed 1:04.54 beaver multi_v7_defconfig : passed 1:00.12 capri bcm_defconfig : passed 0:40.75 capri multi_v7_defconfig : passed 0:39.70 cubie sunxi_defconfig : passed 1:20.71 cubie multi_v7_defconfig : passed 1:27.97 cubie2 sunxi_defconfig : passed 1:13.08 cubie2 multi_v7_defconfig : passed 1:25.59 cubie2 multi_lpae_defconfig : passed 1:18.10 dalmore tegra_defconfig : passed 1:23.45 dalmore multi_v7_defconfig : passed 1:23.19 dalmore multi_lpae_defconfig : passed 1:26.46 hummingboard imx_v6_v7_defconfig : passed 1:34.26 hummingboard multi_v7_defconfig : passed 1:10.81 jetson tegra_defconfig : passed 1:05.12 jetson multi_v7_defconfig : passed 0:56.02 jetson multi_lpae_defconfig : passed 1:07.36 omap5uevm omap2plus_defconfig : warnings 1:09.93 omap5uevm multi_v7_defconfig : warnings 2:15.58 omap5uevm multi_lpae_defconfig : warnings 1:51.55 panda omap2plus_defconfig : warnings 1:39.89 panda multi_v7_defconfig : passed 1:48.16 sama5 sama5_defconfig : passed 1:50.34 seaboard tegra_defconfig : passed 1:04.78 seaboard multi_v7_defconfig : passed 1:20.65 snow exynos_defconfig : passed 1:51.28 snowball u8500_defconfig : passed 1:50.12 trimslice tegra_defconfig : passed 1:05.77 trimslice multi_v7_defconfig : passed 1:01.81 wandboard imx_v6_v7_defconfig : passed 1:10.10 wandboard multi_v7_defconfig : passed 1:14.60 Offline boards: bbb multi_v7_defconfig : OFFLINE 0:49.00 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.248717] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254571] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262688] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.283441] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.290525] hub 2-0:1.0: USB hub found [ 1.294325] hub 2-0:1.0: 1 port detected [ 1.298636] SPEAr-ehci: EHCI SPEAr driver [ 1.302727] tegra-ehci: Tegra EHCI driver [ 1.307314] usbcore: registered new interface driver usb-storage [ 1.314658] mousedev: PS/2 mouse device common for all mice [ 1.321443] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330602] i2c /dev entries driver [ 1.335749] usbcore: registered new interface driver uvcvideo [ 1.341466] USB Video Class driver (1.1.1) [ 1.345572] gspca_main: v2.14.0 registered [ 1.352704] orion_wdt: Initial timeout 25 sec [ 1.357860] sdhci: Secure Digital Host Controller Interface driver [ 1.364027] sdhci: Copyright(c) Pierre Ossman [ 1.368970] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.375304] usbcore: registered new interface driver usbhid [ 1.380847] usbhid: USB HID core driver [ 1.387644] TCP: cubic registered [ 1.390951] NET: Registered protocol family 17 [ 1.395447] can: controller area network core (rev 20120528 abi 9) [ 1.401657] NET: Registered protocol family 29 [ 1.406104] can: raw protocol (rev 20120528) [ 1.410354] can: broadcast manager protocol (rev 20120528 t) [ 1.416007] can: netlink gateway (rev 20130117) max_hops=1 [ 1.421855] Key type dns_resolver registered [ 1.426309] ThumbEE CPU extension supported. [ 1.430566] Registering SWP/SWPB emulation handler [ 1.435349] PJ4 iWMMXt v2 coprocessor enabled. [ 1.440833] USB Power: 5000 mV [ 1.444361] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-27 19:38:16 UTC (1401219496) [ 1.454812] ALSA device list: [ 1.457769] No soundcards found. [ 1.461676] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467285] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-0TQwfW/tmpKHIofi-uImage tftp 0x01000000 tmp/snowball-0TQwfW/tmpKHIofi-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-0TQwfW/tmpKHIofi-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4741633 (485a01 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4741569 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 6 months

arm-soc build: 7 warnings 0 failures (arm-soc/v3.15-rc6-1189-gf3246fd)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: f3246fd Merge branch 'next/fixes-non-critical' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc6-1189-gf3246fd/ Runtime: 44m 34s Passed: 126 Failed: 0 Warnings: 7 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 6 months

next boot: 48 pass, 9 fail (next-20140527)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140527 Failed boot tests (console logs at the end) =========================================== imx6dl-wandboard,wand-dual: FAIL: arm-imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-imx_v6_v7_defconfig armada-370-mirabox: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig exynos5250-arndale: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.4 sec: PASS da850-evm 0 min 19.6 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 33.8 sec: PASS tegra30-beaver 0 min 23.0 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 33.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.4 sec: PASS omap5-uevm 1 min 57.5 sec: PASS (Warnings: 8) sun7i-a20-cubieboard2 0 min 16.5 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 1 min 47.7 sec: FAIL imx6dl-wandboard,wand-solo 0 min 19.2 sec: FAIL imx6q-wandboard 0 min 21.1 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 56.6 sec: PASS am335x-boneblack 0 min 29.8 sec: PASS omap3-beagle-xm 1 min 5.0 sec: PASS legacy,3530beagle 0 min 47.8 sec: PASS (Warnings: 1) omap4-panda 1 min 10.7 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 27.3 sec: PASS (Warnings: 1) am335x-bone 0 min 31.4 sec: PASS omap3-overo-storm-tobi 0 min 29.0 sec: PASS omap5-uevm 1 min 15.2 sec: PASS (Warnings: 6) omap3-n900 0 min 21.6 sec: PASS (Warnings: 1) legacy,n900 0 min 21.1 sec: PASS (Warnings: 1) omap4-panda-es 1 min 8.4 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 25.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- am335x-boneblack 0 min 28.4 sec: PASS sun7i-a20-cubieboard2 0 min 16.4 sec: PASS sun4i-a10-cubieboard 0 min 21.4 sec: PASS omap3-overo-tobi 0 min 26.1 sec: PASS (Warnings: 1) am335x-bone 0 min 30.8 sec: PASS tegra124-jetson-tk1 0 min 33.7 sec: PASS armada-370-mirabox 1 min 54.2 sec: FAIL omap4-panda 1 min 8.4 sec: PASS (Warnings: 1) imx6q-wandboard 1 min 45.9 sec: FAIL imx6dl-wandboard,wand-dual 1 min 47.4 sec: FAIL ste-snowball 1 min 25.8 sec: PASS tegra30-beaver 0 min 24.2 sec: PASS omap3-n900 0 min 19.1 sec: PASS (Warnings: 1) qcom-apq8074-dragonboard 0 min 21.3 sec: PASS bcm28155-ap 0 min 30.8 sec: PASS imx6dl-wandboard,wand-solo 1 min 47.4 sec: FAIL omap3-overo-storm-tobi 0 min 27.8 sec: PASS omap3-beagle-xm 1 min 5.5 sec: PASS exynos5420-arndale-octa 0 min 50.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.2 sec: PASS omap5-uevm 1 min 57.1 sec: PASS (Warnings: 8) omap4-panda-es 1 min 13.7 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 59.3 sec: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.6 sec: PASS sun4i-a10-cubieboard 0 min 16.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 26.8 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.4 sec: PASS exynos5250-arndale 0 min 32.4 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.4 sec: FAIL arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 24.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 21.3 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered failed to disable 1.2 GHz OPP Registering SWP/SWPB emulation handler platform 2028000.ssi: Driver fsl-ssi-dai requests probe deferral fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517 platform 2004000.spdif: Driver fsl-spdif-dai requests probe deferral imx-sgtl5000 sound: ASoC: CPU DAI (null) not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) platform sound: Driver imx-sgtl5000 requests probe deferral imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) mmc1: queuing unknown CIS tuple 0x80 (4 bytes) mmc1: queuing unknown CIS tuple 0x02 (1 bytes) mmc1: new SDIO card at address 0001 mmc2: host does not support reading read-only switch. assuming write-enable. mmc2: new high speed SD card at address 1234 mmcblk0: mmc2:1234 SA02G 1.81 GiB mmcblk0: p1 platform 2028000.ssi: Driver fsl-ssi-dai requests probe deferral fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517 platform 2004000.spdif: Driver fsl-spdif-dai requests probe deferral imx-sgtl5000 sound: ASoC: CPU DAI (null) not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) platform sound: Driver imx-sgtl5000 requests probe deferral imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.72 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ r5:9e43f7ec r4:9e43f600 [<8007f3a0>] (timecounter_read) from [<803f5b2c>] (fec_time_keep+0x28/0x50) r10:9e43f600 r9:803f5b04 r8:803f5b04 r7:00000100 r6:80000113 r5:9e43f7ec r4:9e43f600 [<803f5b04>] (fec_time_keep) from [<800338e8>] (call_timer_fn+0x74/0xec) r6:00000001 r5:808f6000 r4:808f7e08 r3:80901f70 [<80033874>] (call_timer_fn) from [<80034238>] (run_timer_softirq+0x1c4/0x264) r10:808f80c0 r8:9e43f600 r7:00000000 r6:808f7e48 r5:8095cb80 r4:9e43f854 [<80034074>] (run_timer_softirq) from [<8002da70>] (__do_softirq+0x120/0x26c) r10:808f8080 r9:00000001 r8:00000100 r7:00000001 r6:808f6000 r5:808f8084 r4:00000000 [<8002d950>] (__do_softirq) from [<8002deb4>] (irq_exit+0xb0/0x104) r10:8067188c r9:808f6000 r8:00000000 r7:00000057 r6:808f6000 r5:808f2e1c r4:808f6000 [<8002de04>] (irq_exit) from [<8000f4bc>] (handle_IRQ+0x58/0xb8) r4:808fed2c r3:00000184 [<8000f464>] (handle_IRQ) from [<800086c0>] (gic_handle_irq+0x30/0x68) r8:00000000 r7:f4000100 r6:808f7f28 r5:808fee9c r4:f400010c r3:000000a0 [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0x808f7f28 to 0x808f7f70) 7f20: 00000001 00000001 00000000 80901f70 808f6000 808fe98c 7f40: 808fe938 808f6000 00000000 808f6000 8067188c 808f7f7c 808f7f40 808f7f70 7f60: 800670e4 8000f834 20000113 ffffffff r7:808f7f5c r6:ffffffff r5:20000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<806626a0>] (rest_init+0xb0/0xd8) r7:9efffa00 r3:00000000 [<806625f0>] (rest_init) from [<808a3bf8>] (start_kernel+0x340/0x3a4) r5:00000001 r4:808fea38 [<808a38b8>] (start_kernel) from [<10008074>] (0x10008074) r7:8090364c r6:808e58ac r5:808fe928 r4:8095b394 Code: e92dd830 e24cb004 e5103210 e1a04000 (e5935400) ---[ end trace 98e200100ecac98b ]--- Kernel panic - not syncing: Fatal exception in interrupt ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: kernel: Unable to handle kernel paging request at virtual address a0970400 # PYBOOT: Time: 19.17 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0x808f7f28 to 0x808f7f70) 7f20: 8000f830 808f7f38 00000000 00000000 808f6000 808fe98c 7f40: 808fe938 808f6000 00000000 808f6000 8067188c 808f7f7c 808f7f60 808f7f70 7f60: 800671d0 8000f834 60000113 ffffffff r7:808f7f5c r6:ffffffff r5:60000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<806626a0>] (rest_init+0xb0/0xd8) r7:ee7ffa00 r3:00000000 [<806625f0>] (rest_init) from [<808a3bf8>] (start_kernel+0x340/0x3a4) r5:00000001 r4:808fea38 [<808a38b8>] (start_kernel) from [<10008074>] (0x10008074) r7:8090364c r6:808e58ac r5:808fe928 r4:8095b394 CPU2: stopping CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.15.0-rc7-next-20140527 #1 Backtrace: [<80011d84>] (dump_backtrace) from [<80011f20>] (show_stack+0x18/0x1c) r6:808f2e1c r5:00000000 r4:00000000 r3:00000000 [<80011f08>] (show_stack) from [<80667b4c>] (dump_stack+0x88/0xa4) [<80667ac4>] (dump_stack) from [<80014ec4>] (handle_IPI+0x148/0x174) r5:808fed2c r4:00000002 [<80014d7c>] (handle_IPI) from [<800086f0>] (gic_handle_irq+0x60/0x68) r8:00000000 r7:f4000100 r6:ed0b5f70 r5:808fee9c r4:f400010c r3:01400000 [<80008690>] (gic_handle_irq) from [<80012a64>] (__irq_svc+0x44/0x5c) Exception stack(0xed0b5f70 to 0xed0b5fb8) 5f60: 8000f830 ed0b5f80 00000000 00000000 5f80: ed0b4000 808fe98c 808fe938 ed0b4000 00000000 ed0b4000 8067188c ed0b5fc4 5fa0: ed0b5fa8 ed0b5fb8 800671d0 8000f834 60000113 ffffffff r7:ed0b5fa4 r6:ffffffff r5:60000113 r4:8000f834 [<8000f80c>] (arch_cpu_idle) from [<800603ec>] (cpu_startup_entry+0x108/0x178) [<800602e4>] (cpu_startup_entry) from [<80014b08>] (secondary_start_kernel+0x12c/0x14c) r7:8095b418 r3:ed086180 [<800149dc>] (secondary_start_kernel) from [<10008784>] (0x10008784) r5:00000015 r4:7d09806a ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 # PYBOOT: Time: 21.10 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- [ 76.138817] [<c02a14e0>] (watchdog_timer_fn) from [<c026203c>] (__run_hrtimer.isra.19+0x54/0xe0) [ 76.147621] [<c026203c>] (__run_hrtimer.isra.19) from [<c0262524>] (hrtimer_interrupt+0x10c/0x2dc) [ 76.156600] [<c0262524>] (hrtimer_interrupt) from [<c06b1938>] (armada_370_xp_timer_interrupt+0x3c/0x4c) [ 76.166101] [<c06b1938>] (armada_370_xp_timer_interrupt) from [<c0284b5c>] (handle_percpu_devid_irq+0x68/0x84) [ 76.176121] [<c0284b5c>] (handle_percpu_devid_irq) from [<c028129c>] (generic_handle_irq+0x20/0x30) [ 76.185185] [<c028129c>] (generic_handle_irq) from [<c020f1b4>] (handle_IRQ+0x38/0x94) [ 76.193119] [<c020f1b4>] (handle_IRQ) from [<c0208750>] (armada_370_xp_handle_irq+0x4c/0xc0) [ 76.201575] [<c0208750>] (armada_370_xp_handle_irq) from [<c0211d00>] (__irq_svc+0x40/0x50) [ 76.209939] Exception stack(0xea053cc0 to 0xea053d08) [ 76.215002] 3cc0: 00000000 ea053d24 ea053d38 00000000 00000000 00000000 ea01d068 ea053d24 [ 76.223196] 3ce0: 00000080 c0c536a8 ea01d000 ea22fc68 ea053d4c ea053d08 c024e874 c024e644 [ 76.231386] 3d00: 40000013 ffffffff [ 76.234885] [<c0211d00>] (__irq_svc) from [<c024e644>] (lock_timer_base+0x14/0x48) [ 76.242471] [<c024e644>] (lock_timer_base) from [<c024e874>] (try_to_del_timer_sync+0x14/0x58) [ 76.251099] [<c024e874>] (try_to_del_timer_sync) from [<c024e8ec>] (del_timer_sync+0x34/0x58) [ 76.259641] [<c024e8ec>] (del_timer_sync) from [<c0604138>] (xhci_mem_cleanup+0x18/0x444) [ 76.267835] [<c0604138>] (xhci_mem_cleanup) from [<c06052f0>] (xhci_mem_init+0xd8c/0x1094) [ 76.276119] [<c06052f0>] (xhci_mem_init) from [<c05fd188>] (xhci_init+0x48/0xac) [ 76.283531] [<c05fd188>] (xhci_init) from [<c0601e4c>] (xhci_gen_setup+0x1c8/0x1fc) [ 76.291204] [<c0601e4c>] (xhci_gen_setup) from [<c060bf78>] (xhci_pci_setup+0x14/0x60) [ 76.299138] [<c060bf78>] (xhci_pci_setup) from [<c05e129c>] (usb_add_hcd+0x210/0x6f0) [ 76.306985] [<c05e129c>] (usb_add_hcd) from [<c05efbf0>] (usb_hcd_pci_probe+0x1ac/0x39c) [ 76.315092] [<c05efbf0>] (usb_hcd_pci_probe) from [<c060c29c>] (xhci_pci_probe+0x2c/0x110) [ 76.323372] [<c060c29c>] (xhci_pci_probe) from [<c0451288>] (pci_device_probe+0x74/0xbc) [ 76.331482] [<c0451288>] (pci_device_probe) from [<c0514c34>] (driver_probe_device+0x114/0x23c) [ 76.340199] [<c0514c34>] (driver_probe_device) from [<c0514de8>] (__driver_attach+0x8c/0x90) [ 76.348656] [<c0514de8>] (__driver_attach) from [<c0513400>] (bus_for_each_dev+0x54/0x88) [ 76.356851] [<c0513400>] (bus_for_each_dev) from [<c05143c8>] (bus_add_driver+0xd4/0x1d0) [ 76.365046] [<c05143c8>] (bus_add_driver) from [<c0515428>] (driver_register+0x78/0xf4) [ 76.373068] [<c0515428>] (driver_register) from [<c0ad4b38>] (xhci_hcd_init+0x8/0x10) [ 76.380915] [<c0ad4b38>] (xhci_hcd_init) from [<c0208c64>] (do_one_initcall+0x80/0x1b8) [ 76.388937] [<c0208c64>] (do_one_initcall) from [<c0a97c8c>] (kernel_init_freeable+0x100/0x1cc) [ 76.397656] [<c0a97c8c>] (kernel_init_freeable) from [<c07db924>] (kernel_init+0x8/0xec) [ 76.405764] [<c07db924>] (kernel_init) from [<c020e978>] (ret_from_fork+0x14/0x3c) [ 85.221195] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=16807 jiffies, g=-277, c=-278, q=11) [ 85.231768] INFO: Stall ended before state dump start ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 114.16 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- [ 1.145836] Synopsys Designware Multimedia Card Interface Driver [ 1.152431] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.158930] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.169118] mmc0: no vqmmc regulator found [ 1.173242] mmc0: no vmmc regulator found [ 1.212768] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.220310] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.230485] mmc1: no vqmmc regulator found [ 1.234604] mmc1: no vmmc regulator found [ 1.272764] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.280492] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.289668] mmc2: no vqmmc regulator found [ 1.293785] mmc2: no vmmc regulator found [ 1.314797] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.328945] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.332764] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.333563] usbcore: registered new interface driver usbhid [ 1.333565] usbhid: USB HID core driver [ 1.337522] TCP: cubic registered [ 1.337536] NET: Registered protocol family 17 [ 1.337559] can: controller area network core (rev 20120528 abi 9) [ 1.337617] NET: Registered protocol family 29 [ 1.337628] can: raw protocol (rev 20120528) [ 1.337635] can: broadcast manager protocol (rev 20120528 t) [ 1.337647] can: netlink gateway (rev 20130117) max_hops=1 [ 1.338056] Key type dns_resolver registered [ 1.342038] ThumbEE CPU extension supported. [ 1.342062] Registering SWP/SWPB emulation handler [ 1.343304] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.407071] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.442230] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.454944] mmc1: new SDIO card at address 0001 [ 1.533820] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.551153] mmc2: new high speed SDHC card at address aaaa [ 1.556991] mmcblk0: mmc2:aaaa SU04G 3.69 GiB [ 1.564620] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.93 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 1.136779] Synopsys Designware Multimedia Card Interface Driver [ 1.143421] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.149938] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.160127] mmc0: no vqmmc regulator found [ 1.164251] mmc0: no vmmc regulator found [ 1.202979] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.210628] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.220806] mmc1: no vqmmc regulator found [ 1.224925] mmc1: no vmmc regulator found [ 1.262976] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.270769] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.279946] mmc2: no vqmmc regulator found [ 1.284064] mmc2: no vmmc regulator found [ 1.305149] mmc1: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.319304] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.322975] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.323797] usbcore: registered new interface driver usbhid [ 1.323799] usbhid: USB HID core driver [ 1.327916] TCP: cubic registered [ 1.327928] NET: Registered protocol family 17 [ 1.327993] can: controller area network core (rev 20120528 abi 9) [ 1.328059] NET: Registered protocol family 29 [ 1.328070] can: raw protocol (rev 20120528) [ 1.328077] can: broadcast manager protocol (rev 20120528 t) [ 1.328088] can: netlink gateway (rev 20130117) max_hops=1 [ 1.328448] Key type dns_resolver registered [ 1.328610] ThumbEE CPU extension supported. [ 1.328634] Registering SWP/SWPB emulation handler [ 1.329867] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.397379] mmc1: queuing unknown CIS tuple 0x80 (4 bytes) [ 1.432280] mmc1: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.444861] mmc1: new SDIO card at address 0001 [ 1.506161] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.520484] mmc2: new high speed SD card at address 1234 [ 1.526167] mmcblk0: mmc2:1234 SA02G 1.81 GiB [ 1.532609] mmcblk0: p1 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.43 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ [ 1.082997] usbcore: registered new interface driver uvcvideo [ 1.088773] USB Video Class driver (1.1.1) [ 1.092896] gspca_main: v2.14.0 registered [ 1.099604] sdhci: Secure Digital Host Controller Interface driver [ 1.105817] sdhci: Copyright(c) Pierre Ossman [ 1.111173] Synopsys Designware Multimedia Card Interface Driver [ 1.117788] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.124347] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.134549] mmc0: no vqmmc regulator found [ 1.138674] mmc0: no vmmc regulator found [ 1.177512] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.185148] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.195327] mmc1: no vqmmc regulator found [ 1.199450] mmc1: no vmmc regulator found [ 1.237511] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.248348] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.257527] mmc2: no vqmmc regulator found [ 1.261634] mmc2: no vmmc regulator found [ 1.302806] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.310897] usbcore: registered new interface driver usbhid [ 1.316513] usbhid: USB HID core driver [ 1.324450] TCP: cubic registered [ 1.327822] NET: Registered protocol family 17 [ 1.332293] can: controller area network core (rev 20120528 abi 9) [ 1.338554] NET: Registered protocol family 29 [ 1.343031] can: raw protocol (rev 20120528) [ 1.347315] can: broadcast manager protocol (rev 20120528 t) [ 1.353022] can: netlink gateway (rev 20130117) max_hops=1 [ 1.358893] Key type dns_resolver registered [ 1.363357] ThumbEE CPU extension supported. [ 1.367680] Registering SWP/SWPB emulation handler [ 1.375796] ../drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.675871] mmc2: host does not support reading read-only switch. assuming write-enable. [ 1.690689] mmc2: new high speed SDHC card at address 1234 [ 1.696559] mmcblk0: mmc2:1234 SA04G 3.67 GiB [ 1.702999] mmcblk0: p1 p2 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 107.44 seconds. # PYBOOT: Result: FAIL exynos5250-arndale: FAIL: last 40 lines of boot log: ---------------------------------------------------- ARNDALE5250 # tftp 0x40800000 192.168.1.2:tmp/arndale-MkX9_R/zImage tftp 0x40800000 192.168.1.2:tmp/arndale-MkX9_R/zImage Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-MkX9_R/zImage'. Load address: 0x40800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### done Bytes transferred = 4834800 (49c5f0 hex) ARNDALE5250 # tftp 0x407c0000 192.168.1.2:tmp/arndale-MkX9_R/exynos5250-arndale.dtb tftp 0x407c0000 192.168.1.2:tmp/arndale-MkX9_R/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.167 Filename 'tmp/arndale-MkX9_R/exynos5250-arndale.dtb'. Load address: 0x407c0000 Loading: *### done Bytes transferred = 35450 (8a7a hex) ARNDALE5250 # printenv bootargs printenv bootargs bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 ARNDALE5250 # bootz 0x40800000 - 0x407c0000 bootz 0x40800000 - 0x407c0000 ## Flattened Device Tree blob at 407c0000 Booting using the fdt blob at 0x407c0000 Using Device Tree in place at 407c0000, end 407cba79 Starting kernel ... ~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 59.27 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.443359] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.451202] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.459106] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.471038] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.478363] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.489837] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.498352] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.510284] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.517608] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.529083] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.536895] HS USB OTG: no transceiver configured [ 3.541625] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.549468] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.557403] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.569305] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.576629] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.588104] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.596649] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.608581] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.615905] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.627380] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.635192] HS USB OTG: no transceiver configured [ 3.639923] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.647766] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.655700] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.667602] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.674926] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.686401] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.694946] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.706878] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.714202] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.725677] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.733489] HS USB OTG: no transceiver configured [ 3.738189] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.746063] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.753997] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.41 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

next boot: 22 passed 15 failed (next/next-20140526)

by Olof's autobooter

Failed boards: beaver tegra_defconfig : FAILED 1:26.88 cubie2 sunxi_defconfig : FAILED 1:22.70 cubie2 multi_v7_defconfig : FAILED 1:22.02 cubie2 multi_lpae_defconfig : FAILED 1:24.46 cubox multi_v7_defconfig : FAILED 1:31.35 dalmore tegra_defconfig : FAILED 1:30.78 hummingboard imx_v6_v7_defconfig : FAILED 0:32.99 hummingboard multi_v7_defconfig : FAILED 0:26.38 jetson tegra_defconfig : FAILED 1:27.94 snowball u8500_defconfig : FAILED 1:44.25 snowball multi_v7_defconfig : FAILED 1:12.35 trimslice tegra_defconfig : FAILED 1:30.06 trimslice multi_v7_defconfig : FAILED 1:30.03 wandboard imx_v6_v7_defconfig : FAILED 2:58.49 wandboard multi_v7_defconfig : FAILED 0:25.99 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.09 arndale exynos_defconfig : passed 1:22.19 bbb omap2plus_defconfig : passed 1:35.86 bbb multi_v7_defconfig : passed 1:14.92 beaver multi_v7_defconfig : passed 2:06.63 capri bcm_defconfig : passed 0:39.47 capri multi_v7_defconfig : passed 0:42.21 cubie sunxi_defconfig : passed 0:59.47 cubie multi_v7_defconfig : passed 1:06.09 dalmore multi_v7_defconfig : passed 1:14.22 dalmore multi_lpae_defconfig : passed 1:13.28 jetson multi_v7_defconfig : passed 0:46.45 jetson multi_lpae_defconfig : passed 0:51.19 omap5uevm omap2plus_defconfig : passed 1:03.84 omap5uevm multi_v7_defconfig : warnings 1:49.62 omap5uevm multi_lpae_defconfig : warnings 1:53.33 panda omap2plus_defconfig : warnings 1:33.87 panda multi_v7_defconfig : warnings 2:16.71 sama5 sama5_defconfig : passed 1:51.78 seaboard tegra_defconfig : passed 0:53.26 seaboard multi_v7_defconfig : passed 0:57.19 snow exynos_defconfig : passed 1:46.81 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-tegra_defconfig failure log: ------------------------------------------------- [ 2.611525] 7e00: ea061788 ea79dac8 ea061790 ea061788 ea061788 ea1fa848 ea79dac8 c0057ba0 [ 2.619682] 7e20: 0066ef90 ea79da80 c05d1780 00000001 ea79da80 c0842f74 ea1faba8 02d36b50 [ 2.627839] 7e40: c0382838 80000113 ffffffff ea1b7e8c c062e9ac c0012558 00000000 00000005 [ 2.635995] 7e60: 00000008 00000000 00000005 00000000 ea3bd640 00000000 c062e9ac 00000000 [ 2.644151] 7e80: ea1b6030 ea79d580 00000000 ea1b7ea0 c0417e78 c0382838 80000113 ffffffff [ 2.652308] 7ea0: c0883444 c0883444 c0891e24 00000005 00000001 ea3bd640 00000000 c0417e78 [ 2.660465] 7ec0: c08d8ffc c08d8fd8 ea1e16d8 c08d8ffc 00000000 c0432988 ea1fc180 c08833a8 [ 2.668622] 7ee0: ea79d580 ea7a0900 00000000 c003b8f4 c0842454 c05d1800 ea19b940 c004de10 [ 2.676779] 7f00: 00000001 ea1fc180 ea79d580 ea79d594 ea1b6028 ea1b6000 ea1fc198 00000008 [ 2.684935] 7f20: ea79d580 c003c19c c088cc83 a0000113 c003c14c 00000000 00000000 c083c0c0 [ 2.693092] 7f40: 00000000 ea202e00 00000000 ea1fc180 c003c14c 00000000 00000000 00000000 [ 2.701249] 7f60: 00000000 c00417c0 00000000 00000000 ea1b7f70 ea1fc180 00000000 00000000 [ 2.709406] 7f80: ea1b7f80 ea1b7f80 00000001 00010001 ea1b7f90 ea1b7f90 ea1b7fac ea202e00 [ 2.717563] 7fa0: c00416e8 00000000 00000000 c000e778 00000000 00000000 00000000 00000000 [ 2.725719] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.733876] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 4fffffff fffbf7ff [ 2.742038] [<c0041cf0>] (kthread_data) from [<c003c7c8>] (wq_worker_sleeping+0xc/0xc0) [ 2.750036] [<c003c7c8>] (wq_worker_sleeping) from [<c05ca608>] (__schedule+0x468/0x680) [ 2.758116] [<c05ca608>] (__schedule) from [<c00285bc>] (do_exit+0x654/0x8cc) [ 2.765241] [<c00285bc>] (do_exit) from [<c0011e3c>] (die+0x400/0x418) [ 2.771756] [<c0011e3c>] (die) from [<c05c47d8>] (__do_kernel_fault.part.11+0x64/0x74) [ 2.779657] [<c05c47d8>] (__do_kernel_fault.part.11) from [<c001be2c>] (do_page_fault+0x1c8/0x3d0) [ 2.788595] [<c001be2c>] (do_page_fault) from [<c0008614>] (do_DataAbort+0x38/0x98) [ 2.796234] [<c0008614>] (do_DataAbort) from [<c0012558>] (__dabt_svc+0x38/0x60) [ 2.803609] Exception stack(0xea1b7e58 to 0xea1b7ea0) [ 2.808643] 7e40: 00000000 00000005 [ 2.816800] 7e60: 00000008 00000000 00000005 00000000 ea3bd640 00000000 c062e9ac 00000000 [ 2.824957] 7e80: ea1b6030 ea79d580 00000000 ea1b7ea0 c0417e78 c0382838 80000113 ffffffff [ 2.833120] [<c0012558>] (__dabt_svc) from [<c0382838>] (input_event+0x18/0x70) [ 2.840413] [<c0382838>] (input_event) from [<c0417e78>] (snd_jack_report+0xbc/0xdc) [ 2.848140] [<c0417e78>] (snd_jack_report) from [<c0432988>] (snd_soc_jack_report+0xc4/0xe0) [ 2.856560] [<c0432988>] (snd_soc_jack_report) from [<c003b8f4>] (process_one_work+0xf8/0x368) [ 2.865151] [<c003b8f4>] (process_one_work) from [<c003c19c>] (worker_thread+0x50/0x59c) [ 2.873223] [<c003c19c>] (worker_thread) from [<c00417c0>] (kthread+0xd8/0xf0) [ 2.880429] [<c00417c0>] (kthread) from [<c000e778>] (ret_from_fork+0x14/0x3c) [ 2.887632] Code: e513001c e7e00150 e12fff1e e590337c (e5130014) [ 2.893708] ---[ end trace 55ff209772c068ad ]--- [ 2.898309] Fixing recursive fault but reboot is needed! ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.996613] usbcore: registered new interface driver usb-storage [ 1.004044] mousedev: PS/2 mouse device common for all mice [ 1.011443] i2c /dev entries driver [ 1.017149] usbcore: registered new interface driver uvcvideo [ 1.022964] USB Video Class driver (1.1.1) [ 1.027078] gspca_main: v2.14.0 registered [ 1.034274] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.043067] sdhci: Secure Digital Host Controller Interface driver [ 1.049275] sdhci: Copyright(c) Pierre Ossman [ 1.054203] Synopsys Designware Multimedia Card Interface Driver [ 1.060546] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.066801] usbcore: registered new interface driver usbhid [ 1.072390] usbhid: USB HID core driver [ 1.079504] TCP: cubic registered [ 1.082839] NET: Registered protocol family 17 [ 1.087331] can: controller area network core (rev 20120528 abi 9) [ 1.093608] NET: Registered protocol family 29 [ 1.098077] can: raw protocol (rev 20120528) [ 1.102359] can: broadcast manager protocol (rev 20120528 t) [ 1.108033] can: netlink gateway (rev 20130117) max_hops=1 [ 1.113956] Key type dns_resolver registered [ 1.118409] ThumbEE CPU extension supported. [ 1.122713] Registering SWP/SWPB emulation handler [ 1.128317] vcc3v3: disabling [ 1.131345] vcc3v0: disabling [ 1.134998] ahci-5v: 5000 mV [ 1.138479] usb1-vbus: 5000 mV [ 1.142123] usb2-vbus: 5000 mV [ 1.145995] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.154030] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.161873] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.174948] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.183035] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.234582] stmmac_open: DMA descriptors allocation failed [ 1.240198] IP-Config: Failed to open eth0 [ 1.244286] IP-Config: No network devices available [ 1.249313] ALSA device list: [ 1.252294] No soundcards found. ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.997672] usbcore: registered new interface driver usb-storage [ 1.005141] mousedev: PS/2 mouse device common for all mice [ 1.012562] i2c /dev entries driver [ 1.018287] usbcore: registered new interface driver uvcvideo [ 1.024099] USB Video Class driver (1.1.1) [ 1.028213] gspca_main: v2.14.0 registered [ 1.035560] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.044347] sdhci: Secure Digital Host Controller Interface driver [ 1.050550] sdhci: Copyright(c) Pierre Ossman [ 1.055508] Synopsys Designware Multimedia Card Interface Driver [ 1.061848] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.068120] usbcore: registered new interface driver usbhid [ 1.073710] usbhid: USB HID core driver [ 1.080919] TCP: cubic registered [ 1.084255] NET: Registered protocol family 17 [ 1.088755] can: controller area network core (rev 20120528 abi 9) [ 1.095018] NET: Registered protocol family 29 [ 1.099466] can: raw protocol (rev 20120528) [ 1.103750] can: broadcast manager protocol (rev 20120528 t) [ 1.109424] can: netlink gateway (rev 20130117) max_hops=1 [ 1.115383] Key type dns_resolver registered [ 1.119834] ThumbEE CPU extension supported. [ 1.124121] Registering SWP/SWPB emulation handler [ 1.129799] vcc3v3: disabling [ 1.132772] vcc3v0: disabling [ 1.136377] ahci-5v: 5000 mV [ 1.139900] usb1-vbus: 5000 mV [ 1.143461] usb2-vbus: 5000 mV [ 1.147330] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.155391] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.163227] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.176288] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.184401] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.239891] stmmac_open: DMA descriptors allocation failed [ 1.245503] IP-Config: Failed to open eth0 [ 1.249597] IP-Config: No network devices available [ 1.254623] ALSA device list: [ 1.257606] No soundcards found. ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.030304] RPC: Registered named UNIX socket transport module. [ 0.030319] RPC: Registered udp transport module. [ 0.030325] RPC: Registered tcp transport module. [ 0.030331] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.031355] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.039666] bounce: pool size: 64 pages [ 0.039901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.039920] io scheduler noop registered [ 0.039931] io scheduler deadline registered [ 0.040113] io scheduler cfq registered (default) [ 0.042240] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.084231] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.086734] console [ttyS0] disabled [ 0.106922] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.645388] console [ttyS0] enabled [ 0.650348] stmmaceth 1c50000.ethernet: no regulator found [ 0.655938] stmmaceth 1c50000.ethernet: no reset control found [ 0.661783] Ring mode enabled [ 0.664834] No HW DMA feature register supported [ 0.669358] Normal descriptors [ 0.672688] TX Checksum insertion supported [ 0.680346] libphy: stmmac: probed [ 0.683784] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active [ 0.690582] mousedev: PS/2 mouse device common for all mice [ 0.696471] i2c /dev entries driver [ 0.701539] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.710660] TCP: cubic registered [ 0.714028] NET: Registered protocol family 17 [ 0.718578] Registering SWP/SWPB emulation handler [ 0.723911] vcc3v3: disabling [ 0.726882] vcc3v0: disabling [ 0.730353] ahci-5v: 5000 mV [ 0.733615] usb1-vbus: 5000 mV [ 0.736980] usb2-vbus: 5000 mV [ 0.822284] No MAC Management Counters available [ 0.827034] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 0.833635] IP-Config: Failed to open eth0 [ 0.837735] IP-Config: No network devices available ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.066281] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.072116] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 1 [ 1.080121] orion-ehci f1051000.usb-host: can't setup: -12 [ 1.085596] orion-ehci f1051000.usb-host: USB bus 1 deregistered [ 1.091596] orion-ehci f1051000.usb-host: init f1051000.usb-host fail, -12 [ 1.098458] orion-ehci: probe of f1051000.usb-host failed with error -12 [ 1.105207] SPEAr-ehci: EHCI SPEAr driver [ 1.109318] tegra-ehci: Tegra EHCI driver [ 1.113855] usbcore: registered new interface driver usb-storage [ 1.121349] mousedev: PS/2 mouse device common for all mice [ 1.128370] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.137601] i2c /dev entries driver [ 1.142886] usbcore: registered new interface driver uvcvideo [ 1.148643] USB Video Class driver (1.1.1) [ 1.152726] gspca_main: v2.14.0 registered [ 1.160002] orion_wdt: Initial timeout 25 sec [ 1.165506] sdhci: Secure Digital Host Controller Interface driver [ 1.171674] sdhci: Copyright(c) Pierre Ossman [ 1.176739] Synopsys Designware Multimedia Card Interface Driver [ 1.183144] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.189471] usbcore: registered new interface driver usbhid [ 1.195035] usbhid: USB HID core driver [ 1.202304] TCP: cubic registered [ 1.205654] NET: Registered protocol family 17 [ 1.210106] can: controller area network core (rev 20120528 abi 9) [ 1.216344] NET: Registered protocol family 29 [ 1.220790] can: raw protocol (rev 20120528) [ 1.225054] can: broadcast manager protocol (rev 20120528 t) [ 1.230710] can: netlink gateway (rev 20130117) max_hops=1 [ 1.236558] Key type dns_resolver registered [ 1.241020] ThumbEE CPU extension supported. [ 1.245304] Registering SWP/SWPB emulation handler [ 1.250086] PJ4 iWMMXt v2 coprocessor enabled. [ 1.255645] USB Power: 5000 mV [ 1.259203] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 10:36:48 UTC (1401100608) [ 1.269717] ALSA device list: [ 1.272667] No soundcards found. [ 1.276596] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-tegra_defconfig failure log: ------------------------------------------------- [ 3.304819] de80: ea25c030 ea793580 00000000 ea25dea0 c0417e78 c0382838 80000113 ffffffff [ 3.313017] dea0: c0883444 c0883444 c0891e24 00000005 00000001 e9821100 00000000 c0417e78 [ 3.321218] dec0: c08d8ffc c08d8fd8 e9805ed8 c08d8ffc 00000000 c0432988 ea23f400 c08833a8 [ 3.329420] dee0: ea793580 ea796900 00000000 c003b8f4 c0842454 c05d1800 ffffffff c004de10 [ 3.337620] df00: 00000001 ea23f400 ea793580 ea793594 ea25c028 ea25c000 ea23f418 00000008 [ 3.345821] df20: ea793580 c003c19c c088cc83 a0000113 c003c14c 00000000 00000000 c083c0c0 [ 3.354019] df40: 00000000 ea23e980 00000000 ea23f400 c003c14c 00000000 00000000 00000000 [ 3.362220] df60: 00000000 c00417c0 ffffffff 00000000 fffbfff7 ea23f400 00000000 00000000 [ 3.370419] df80: ea25df80 ea25df80 00000001 00010001 ea25df90 ea25df90 ea25dfac ea23e980 [ 3.378618] dfa0: c00416e8 00000000 00000000 c000e778 00000000 00000000 00000000 00000000 [ 3.386815] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.395014] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffef feffffff [ 3.403238] [<c0041cf0>] (kthread_data) from [<c003c7c8>] (wq_worker_sleeping+0xc/0xc0) [ 3.411299] [<c003c7c8>] (wq_worker_sleeping) from [<c05ca608>] (__schedule+0x468/0x680) [ 3.419443] [<c05ca608>] (__schedule) from [<c00285bc>] (do_exit+0x654/0x8cc) [ 3.426630] [<c00285bc>] (do_exit) from [<c0011e3c>] (die+0x400/0x418) [ 3.433206] [<c0011e3c>] (die) from [<c05c47d8>] (__do_kernel_fault.part.11+0x64/0x74) [ 3.441162] [<c05c47d8>] (__do_kernel_fault.part.11) from [<c001be2c>] (do_page_fault+0x1c8/0x3d0) [ 3.450150] [<c001be2c>] (do_page_fault) from [<c0008614>] (do_DataAbort+0x38/0x98) [ 3.457848] [<c0008614>] (do_DataAbort) from [<c0012558>] (__dabt_svc+0x38/0x60) [ 3.465256] Exception stack(0xea25de58 to 0xea25dea0) [ 3.470326] de40: 00000000 00000005 [ 3.478526] de60: 00000008 00000000 00000005 00000000 e9821100 00000000 c062e9ac 00000000 [ 3.486727] de80: ea25c030 ea793580 00000000 ea25dea0 c0417e78 c0382838 80000113 ffffffff [ 3.494960] [<c0012558>] (__dabt_svc) from [<c0382838>] (input_event+0x18/0x70) [ 3.502315] [<c0382838>] (input_event) from [<c0417e78>] (snd_jack_report+0xbc/0xdc) [ 3.510104] [<c0417e78>] (snd_jack_report) from [<c0432988>] (snd_soc_jack_report+0xc4/0xe0) [ 3.518584] [<c0432988>] (snd_soc_jack_report) from [<c003b8f4>] (process_one_work+0xf8/0x368) [ 3.527234] [<c003b8f4>] (process_one_work) from [<c003c19c>] (worker_thread+0x50/0x59c) [ 3.535359] [<c003c19c>] (worker_thread) from [<c00417c0>] (kthread+0xd8/0xf0) [ 3.542616] [<c00417c0>] (kthread) from [<c000e778>] (ret_from_fork+0x14/0x3c) [ 3.549867] Code: e513001c e7e00150 e12fff1e e590337c (e5130014) [ 3.555989] ---[ end trace 01ccb21841bdbd26 ]--- [ 3.560620] Fixing recursive fault but reboot is needed! [ 4.011888] tegra-i2c 7000d000.i2c: i2c transfer timed out [ 4.017481] SYSEN1: disabling [ 5.011597] tegra-i2c 7000d000.i2c: i2c transfer timed out [ 5.017183] SYSEN1: couldn't disable: -110 ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- [<80357840>] (device_add) from [<8035bbb8>] (platform_device_add+0xb4/0x218) r9:00000000 r8:9e527e80 r7:00000002 r6:9e732c10 r5:9e732c00 r4:00000002 [<8035bb04>] (platform_device_add) from [<8043f50c>] (ci_hdrc_add_device+0x1a0/0x1c8) r7:00000002 r6:9e475d7c r5:00000000 r4:00000000 [<8043f36c>] (ci_hdrc_add_device) from [<80443978>] (ci_hdrc_imx_probe+0x1d0/0x2d8) r10:00000000 r9:00000000 r8:806c01c8 r7:00000000 r6:9e724f50 r5:9e53f000 r4:9e53f010 r3:9e475d7c [<804437a8>] (ci_hdrc_imx_probe) from [<8035be6c>] (platform_drv_probe+0x20/0x50) r9:00000000 r8:8094abf8 r7:00000000 r6:00000000 r5:8094abf8 r4:9e53f010 [<8035be4c>] (platform_drv_probe) from [<8035a4ec>] (driver_probe_device+0x114/0x250) r5:9e53f010 r4:81170694 [<8035a3d8>] (driver_probe_device) from [<8035a710>] (__driver_attach+0x9c/0xa0) r9:9e724c00 r8:808f523c r7:00000000 r6:9e53f044 r5:8094abf8 r4:9e53f010 [<8035a674>] (__driver_attach) from [<803588c8>] (bus_for_each_dev+0x68/0x9c) r6:8035a674 r5:8094abf8 r4:00000000 r3:00000000 [<80358860>] (bus_for_each_dev) from [<80359f88>] (driver_attach+0x20/0x28) r6:809394d8 r5:9e721c00 r4:8094abf8 [<80359f68>] (driver_attach) from [<80359c0c>] (bus_add_driver+0x148/0x1f4) [<80359ac4>] (bus_add_driver) from [<8035ad60>] (driver_register+0x80/0x100) r7:9e474000 r6:808e420c r5:80911d60 r4:8094abf8 [<8035ace0>] (driver_register) from [<8035be38>] (__platform_driver_register+0x50/0x64) r5:80911d60 r4:80911d60 [<8035bde8>] (__platform_driver_register) from [<808e4224>] (ci_hdrc_imx_driver_init+0x18/0x20) [<808e420c>] (ci_hdrc_imx_driver_init) from [<800089bc>] (do_one_initcall+0x88/0x1dc) [<80008934>] (do_one_initcall) from [<808b3d5c>] (kernel_init_freeable+0x10c/0x1d0) r10:808f5248 r9:000000c4 r8:808f523c r7:8096b1c0 r6:8096b1c0 r5:00000006 r4:80901710 [<808b3c50>] (kernel_init_freeable) from [<8066edc4>] (kernel_init+0x10/0xf4) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066edb4 r4:00000000 [<8066edb4>] (kernel_init) from [<8000eb48>] (ret_from_fork+0x14/0x2c) r4:00000000 r3:ffffffff Code: e595305c e5952058 e59fc110 e59f1110 (e5823004) ---[ end trace cdd3e8658abab249 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ~$off # PYBOOT: Exception: panic ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.901496] sp : c0b53e78 ip : 00000000 fp : c0c31400 [ 1.912974] r10: c0c32018 r9 : c0c31e18 r8 : 00000000 [ 1.918201] r7 : c0b52038 r6 : 00000100 r5 : c0b52000 r4 : c0b53e98 [ 1.924729] r3 : c0b53e78 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.931262] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.938575] Control: 10c5387d Table: 2b438059 DAC: 00000015 [ 1.944323] Process swapper/0 (pid: 0, stack limit = 0xc0b52250) [ 1.950333] Stack: (0xc0b53e78 to 0xc0b54000) [ 1.954695] 3e60: c0b50208 dbbb12a8 [ 1.962877] 3e80: c0b53e98 00200200 00000000 c0b540c0 c0c31c18 c0251f34 db08dedc db08dedc [ 1.971060] 3ea0: c0b501fc 00000080 c0b54084 c0b54080 c0b52000 40000001 c0b54080 00000001 [ 1.979243] 3ec0: 00000100 c024bb08 c0c2e0ce c02858b0 c0b50390 c0b52008 0000000a c0c310c0 [ 1.987425] 3ee0: c0b52000 c0b52008 c0b540c0 ffff1714 c0804a30 00200000 00000000 c0b52020 [ 1.995607] 3f00: 00000057 00000000 f4000100 00000000 c0b50c20 c0b52000 00000000 c024bee0 [ 2.003789] 3f20: c0b50ad0 c020f000 f400010c c0b5a8d0 c0b53f50 c0208908 c020f300 c020f304 [ 2.011970] 3f40: 60000013 ffffffff c0b53f84 c0212400 ffffffed 00000000 ffffffed c021b8a0 [ 2.020152] 3f60: c0b5a4bc c0b52000 c0b5a450 00000000 00000000 c0b50c20 c0b52000 00000000 [ 2.028335] 3f80: 00000000 c0b53f98 c020f300 c020f304 60000013 ffffffff 00000000 c027b468 [ 2.036517] 3fa0: dbfffb00 c0c2e0cc c0804a24 c0b52000 00000000 c0c2e240 00000000 c0ab2b90 [ 2.044700] 3fc0: ffffffff ffffffff c0ab25ec 00000000 00000000 c0b1f1b0 00000000 c0c2e5d4 [ 2.052882] 3fe0: c0b5a43c c0b1f1ac c0b5e380 10204059 412fc09a 10208074 00000000 00000000 [ 2.061078] [<c0251d10>] (call_timer_fn.isra.33) from [<c0251f34>] (run_timer_softirq+0x1c0/0x23c) [ 2.070050] [<c0251f34>] (run_timer_softirq) from [<c024bb08>] (__do_softirq+0x120/0x274) [ 2.078237] [<c024bb08>] (__do_softirq) from [<c024bee0>] (irq_exit+0xac/0xf4) [ 2.085471] [<c024bee0>] (irq_exit) from [<c020f000>] (handle_IRQ+0x44/0x90) [ 2.092530] [<c020f000>] (handle_IRQ) from [<c0208908>] (gic_handle_irq+0x38/0x68) [ 2.100111] [<c0208908>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.107597] Exception stack(0xc0b53f50 to 0xc0b53f98) [ 2.112652] 3f40: ffffffed 00000000 ffffffed c021b8a0 [ 2.120835] 3f60: c0b5a4bc c0b52000 c0b5a450 00000000 00000000 c0b50c20 c0b52000 00000000 [ 2.129016] 3f80: 00000000 c0b53f98 c020f300 c020f304 60000013 ffffffff [ 2.135641] [<c0212400>] (__irq_svc) from [<c020f304>] (arch_cpu_idle+0x38/0x3c) [ 2.143049] [<c020f304>] (arch_cpu_idle) from [<c027b468>] (cpu_startup_entry+0x1f8/0x22c) [ 2.151325] [<c027b468>] (cpu_startup_entry) from [<c0ab2b90>] (start_kernel+0x374/0x380) [ 2.159505] Code: bad PC value [ 2.162587] ---[ end trace ff7058aae111a524 ]--- [ 2.167221] Kernel panic - not syncing: Fatal exception in interrupt [ 2.173581] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic ======================================================================== Board jetson-tegra_defconfig failure log: ------------------------------------------------- [ 2.737422] de00: ea067788 ea78aac8 ea067790 ea067788 ea067788 ea21e848 ea78aac8 c0057ba0 [ 2.745586] de20: 000fff60 ea78aa80 c05d1780 00000001 ea78aa80 c0842f74 ea21eba8 017f1218 [ 2.753751] de40: c0382838 80000113 ffffffff ea22de8c c062e9ac c0012558 00000000 00000005 [ 2.761914] de60: 00000008 00000000 00000005 00000000 e9805a00 00000000 c062e9ac 00000000 [ 2.770078] de80: ea22c030 ea78a580 00000000 ea22dea0 c0417e78 c0382838 80000113 ffffffff [ 2.778242] dea0: c0883444 c0883444 c0891e24 00000005 00000001 e9805a00 00000000 c0417e78 [ 2.786406] dec0: c08d8ffc c08d8fd8 ea3dd8d8 c08d8ffc 00000000 c0432988 ea1c2380 c08833a8 [ 2.794569] dee0: ea78a580 ea78d900 00000000 c003b8f4 c0842454 c05d1800 ffffffff c004de10 [ 2.802734] df00: 00000001 ea1c2380 ea78a580 ea78a594 ea22c028 ea22c000 ea1c2398 00000008 [ 2.810899] df20: ea78a580 c003c19c c088cc83 a0000113 c003c14c 00000000 00000000 c083c0c0 [ 2.819062] df40: 00000000 ea1c1fc0 00000000 ea1c2380 c003c14c 00000000 00000000 00000000 [ 2.827226] df60: 00000000 c00417c0 ffffffff 00000000 fffffeff ea1c2380 00000000 00000000 [ 2.835390] df80: ea22df80 ea22df80 00000001 00010001 ea22df90 ea22df90 ea22dfac ea1c1fc0 [ 2.843555] dfa0: c00416e8 00000000 00000000 c000e778 00000000 00000000 00000000 00000000 [ 2.851719] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.859882] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffbf ffffff7f [ 2.868055] [<c0041cf0>] (kthread_data) from [<c003c7c8>] (wq_worker_sleeping+0xc/0xc0) [ 2.876057] [<c003c7c8>] (wq_worker_sleeping) from [<c05ca608>] (__schedule+0x468/0x680) [ 2.884143] [<c05ca608>] (__schedule) from [<c00285bc>] (do_exit+0x654/0x8cc) [ 2.891276] [<c00285bc>] (do_exit) from [<c0011e3c>] (die+0x400/0x418) [ 2.897801] [<c0011e3c>] (die) from [<c05c47d8>] (__do_kernel_fault.part.11+0x64/0x74) [ 2.905709] [<c05c47d8>] (__do_kernel_fault.part.11) from [<c001be2c>] (do_page_fault+0x1c8/0x3d0) [ 2.914655] [<c001be2c>] (do_page_fault) from [<c0008614>] (do_DataAbort+0x38/0x98) [ 2.922302] [<c0008614>] (do_DataAbort) from [<c0012558>] (__dabt_svc+0x38/0x60) [ 2.929685] Exception stack(0xea22de58 to 0xea22dea0) [ 2.934727] de40: 00000000 00000005 [ 2.942892] de60: 00000008 00000000 00000005 00000000 e9805a00 00000000 c062e9ac 00000000 [ 2.951056] de80: ea22c030 ea78a580 00000000 ea22dea0 c0417e78 c0382838 80000113 ffffffff [ 2.959230] [<c0012558>] (__dabt_svc) from [<c0382838>] (input_event+0x18/0x70) [ 2.966535] [<c0382838>] (input_event) from [<c0417e78>] (snd_jack_report+0xbc/0xdc) [ 2.974273] [<c0417e78>] (snd_jack_report) from [<c0432988>] (snd_soc_jack_report+0xc4/0xe0) [ 2.982703] [<c0432988>] (snd_soc_jack_report) from [<c003b8f4>] (process_one_work+0xf8/0x368) [ 2.991305] [<c003b8f4>] (process_one_work) from [<c003c19c>] (worker_thread+0x50/0x59c) [ 2.999385] [<c003c19c>] (worker_thread) from [<c00417c0>] (kthread+0xd8/0xf0) [ 3.006598] [<c00417c0>] (kthread) from [<c000e778>] (ret_from_fork+0x14/0x3c) [ 3.013810] Code: e513001c e7e00150 e12fff1e e590337c (e5130014) [ 3.019895] ---[ end trace eef88d9340857a2c ]--- [ 3.024504] Fixing recursive fault but reboot is needed! ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-bUuGPS/tmpK8M8eg-uImage tftp 0x01000000 tmp/snowball-bUuGPS/tmpK8M8eg-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-bUuGPS/tmpK8M8eg-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ##### done Bytes transferred = 4842581 (49e455 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4842517 Bytes = 4.6 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627716] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635650] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647552] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654876] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666351] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674896] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686798] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.694122] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705596] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713409] HS USB OTG: no transceiver configured [ 3.718139] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725982] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733917] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745819] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.753143] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764617] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.773162] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.785095] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792419] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803894] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811706] HS USB OTG: no transceiver configured [ 3.816406] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824249] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.832183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.844116] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851440] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862915] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871429] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883361] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890655] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.902160] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909942] HS USB OTG: no transceiver configured [ 3.914672] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922515] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930419] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942352] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949676] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.961151] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.516989] ALSA pcmC0D0p,0:: cannot preallocate for size 32768 [ 1.522939] ALSA pcmC0D0c,0:: cannot preallocate for size 32768 [ 1.528874] tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok [ 1.538073] TCP: cubic registered [ 1.541414] NET: Registered protocol family 17 [ 1.545883] can: controller area network core (rev 20120528 abi 9) [ 1.552114] NET: Registered protocol family 29 [ 1.556570] can: raw protocol (rev 20120528) [ 1.560841] can: broadcast manager protocol (rev 20120528 t) [ 1.566501] can: netlink gateway (rev 20130117) max_hops=1 [ 1.572272] Key type dns_resolver registered [ 1.576785] ThumbEE CPU extension supported. [ 1.581069] Registering SWP/SWPB emulation handler [ 1.586766] usb1_vbus: 5000 mV [ 1.590454] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.615349] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.620763] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.628378] tegra-ehci c5004000.usb: can't setup: -12 [ 1.633428] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.638997] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.644488] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.653815] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.659227] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.666806] tegra-ehci c5008000.usb: can't setup: -12 [ 1.671855] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.677426] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.682916] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.693625] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.699036] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.706615] tegra-ehci c5000000.usb: can't setup: -12 [ 1.711665] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 1.717243] tegra-ehci c5000000.usb: Failed to add USB HCD [ 1.722735] tegra-ehci: probe of c5000000.usb failed with error -12 [ 1.731324] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 1.738385] rtc-em3027 2-0056: setting system clock to 2014-05-26 10:37:01 UTC (1401100621) [ 1.751402] ALSA device list: [ 1.754367] #0: tegra-trimslice [ 1.758342] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout ======================================================================== Board trimslice-tegra_defconfig failure log: ------------------------------------------------- [ 1.790961] NET: Registered protocol family 15 [ 1.795404] can: controller area network core (rev 20120528 abi 9) [ 1.801894] NET: Registered protocol family 29 [ 1.806346] can: raw protocol (rev 20120528) [ 1.810634] can: broadcast manager protocol (rev 20120528 t) [ 1.816318] can: netlink gateway (rev 20130117) max_hops=1 [ 1.822056] Bluetooth: RFCOMM socket layer initialized [ 1.827210] Bluetooth: RFCOMM ver 1.11 [ 1.831089] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.836420] Bluetooth: BNEP socket layer initialized [ 1.841403] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.847337] Bluetooth: HIDP socket layer initialized [ 1.853676] Registering SWP/SWPB emulation handler [ 1.861347] usb1_vbus: 5000 mV [ 1.865105] platform c5000000.usb: Driver tegra-ehci requests probe deferral [ 1.908263] tegra-ehci c5004000.usb: EHCI Host Controller [ 1.913721] tegra-ehci c5004000.usb: new USB bus registered, assigned bus number 1 [ 1.921431] tegra-ehci c5004000.usb: can't setup: -12 [ 1.926482] tegra-ehci c5004000.usb: USB bus 1 deregistered [ 1.932081] tegra-ehci c5004000.usb: Failed to add USB HCD [ 1.937586] tegra-ehci: probe of c5004000.usb failed with error -12 [ 1.946819] tegra-ehci c5008000.usb: EHCI Host Controller [ 1.952330] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 1 [ 1.959967] tegra-ehci c5008000.usb: can't setup: -12 [ 1.965016] tegra-ehci c5008000.usb: USB bus 1 deregistered [ 1.970612] tegra-ehci c5008000.usb: Failed to add USB HCD [ 1.976116] tegra-ehci: probe of c5008000.usb failed with error -12 [ 1.986757] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.992226] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 1 [ 1.999859] tegra-ehci c5000000.usb: can't setup: -12 [ 2.004908] tegra-ehci c5000000.usb: USB bus 1 deregistered [ 2.010502] tegra-ehci c5000000.usb: Failed to add USB HCD [ 2.016005] tegra-ehci: probe of c5000000.usb failed with error -12 [ 2.023899] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.031681] rtc-em3027 2-0056: setting system clock to 2014-05-26 10:35:06 UTC (1401100506) [ 2.051629] ALSA device list: [ 2.054596] #0: tegra-trimslice [ 2.058608] Waiting for root device /dev/sda1... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-imx_v6_v7_defconfig failure log: ------------------------------------------------- imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral TCP: cubic registered NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 Key type dns_resolver registered Registering SWP/SWPB emulation handler platform 2028000.ssi: Driver fsl-ssi-dai requests probe deferral fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517 platform 2004000.spdif: Driver fsl-spdif-dai requests probe deferral imx-sgtl5000 sound: ASoC: CPU DAI (null) not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) platform sound: Driver imx-sgtl5000 requests probe deferral imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) ALSA device list: No soundcards found. mmcblk1: mmc2:0001 00000 7.60 GiB mmcblk1: p1 p2 platform 2028000.ssi: Driver fsl-ssi-dai requests probe deferral EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) fsl-spdif-dai 2004000.spdif: imx_pcm_dma_init failed: -517 platform 2004000.spdif: Driver fsl-spdif-dai requests probe deferral imx-sgtl5000 sound: ASoC: CPU DAI (null) not registered imx-sgtl5000 sound: snd_soc_register_card failed (-517) platform sound: Driver imx-sgtl5000 requests probe deferral imx-spdif sound-spdif: ASoC: CPU DAI (null) not registered imx-spdif sound-spdif: snd_soc_register_card failed: -517 platform sound-spdif: Driver imx-spdif requests probe deferral EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240) EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 324K (808b3000 - 80904000) INFO: trying to register non-static key. ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.292261] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.299840] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.307325] Exception stack(0xe98a1f60 to 0xe98a1fa8) [ 2.312384] 1f60: 00000000 c0b60354 c0b603a0 0000004c 8668fea6 00000000 86751e39 00000000 [ 2.320568] 1f80: ea7a7c28 c0b50c20 00000001 ea7a7c2c 0000001b e98a1fa8 c069766c c0697678 [ 2.328747] 1fa0: 60000013 ffffffff [ 2.332255] [<c0212400>] (__irq_svc) from [<c0697678>] (cpuidle_enter_state+0x68/0x100) [ 2.340270] [<c0697678>] (cpuidle_enter_state) from [<c027b3f8>] (cpu_startup_entry+0x188/0x22c) [ 2.349062] [<c027b3f8>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.356028] CPU0: stopping [ 2.358746] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.15.0-rc7-next-20140526 #1 [ 2.367290] [<c0215cdc>] (unwind_backtrace) from [<c0211890>] (show_stack+0x10/0x14) [ 2.375047] [<c0211890>] (show_stack) from [<c07f7c9c>] (dump_stack+0x88/0x98) [ 2.382279] [<c07f7c9c>] (dump_stack) from [<c02144ec>] (handle_IPI+0x148/0x174) [ 2.389683] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.397260] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.404747] Exception stack(0xc0b53f28 to 0xc0b53f70) [ 2.409806] 3f20: 00000000 c0b60354 c0b603a0 0000004c 86691f70 00000000 [ 2.417990] 3f40: 86751ded 00000000 ea797c28 c0b50c20 00000001 ea797c2c 0000001b c0b53f70 [ 2.426170] 3f60: c069766c c0697678 60000013 ffffffff [ 2.431235] [<c0212400>] (__irq_svc) from [<c0697678>] (cpuidle_enter_state+0x68/0x100) [ 2.439249] [<c0697678>] (cpuidle_enter_state) from [<c027b3f8>] (cpu_startup_entry+0x188/0x22c) [ 2.448045] [<c027b3f8>] (cpu_startup_entry) from [<c0ab2b90>] (start_kernel+0x374/0x380) [ 2.456226] CPU3: stopping [ 2.458944] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.15.0-rc7-next-20140526 #1 [ 2.467487] [<c0215cdc>] (unwind_backtrace) from [<c0211890>] (show_stack+0x10/0x14) [ 2.475244] [<c0211890>] (show_stack) from [<c07f7c9c>] (dump_stack+0x88/0x98) [ 2.482475] [<c07f7c9c>] (dump_stack) from [<c02144ec>] (handle_IPI+0x148/0x174) [ 2.489878] [<c02144ec>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.497457] [<c0208934>] (gic_handle_irq) from [<c0212400>] (__irq_svc+0x40/0x50) [ 2.504943] Exception stack(0xe98a3f60 to 0xe98a3fa8) [ 2.510003] 3f60: 00000000 c0b60354 c0b60354 0000004c 74b0100b 00000000 86751da2 00000000 [ 2.518186] 3f80: ea7afc28 c0b50c20 00000000 00000000 0000001b e98a3fa8 c069766c c0697678 [ 2.526366] 3fa0: 60000013 ffffffff [ 2.529866] [<c0212400>] (__irq_svc) from [<c0697678>] (cpuidle_enter_state+0x68/0x100) [ 2.537879] [<c0697678>] (cpuidle_enter_state) from [<c027b478>] (cpu_startup_entry+0x208/0x22c) [ 2.546671] [<c027b478>] (cpu_startup_entry) from [<10208a84>] (0x10208a84) [ 2.553641] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ~$off # PYBOOT: Exception: panic

10 years, 6 months

mainline boot: 32 passed 2 failed (mainline/v3.15-rc7)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:31.22 snowball multi_v7_defconfig : FAILED 1:12.66 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:17.35 arndale exynos_defconfig : passed 1:23.16 bbb omap2plus_defconfig : passed 1:35.87 bbb multi_v7_defconfig : passed 1:18.21 beaver tegra_defconfig : passed 1:00.89 beaver multi_v7_defconfig : passed 1:03.84 capri bcm_defconfig : passed 0:39.45 capri multi_v7_defconfig : passed 0:41.28 cubie sunxi_defconfig : passed 1:05.72 cubie multi_v7_defconfig : passed 1:24.34 cubie2 sunxi_defconfig : passed 1:14.85 cubie2 multi_v7_defconfig : passed 1:12.77 cubie2 multi_lpae_defconfig : passed 1:09.20 dalmore tegra_defconfig : passed 1:33.72 dalmore multi_v7_defconfig : passed 1:24.47 dalmore multi_lpae_defconfig : passed 1:23.02 hummingboard imx_v6_v7_defconfig : passed 1:18.65 hummingboard multi_v7_defconfig : passed 1:16.16 omap5uevm omap2plus_defconfig : passed 1:03.57 omap5uevm multi_v7_defconfig : passed 2:02.58 omap5uevm multi_lpae_defconfig : passed 1:50.27 panda omap2plus_defconfig : warnings 1:38.54 panda multi_v7_defconfig : passed 1:41.22 sama5 sama5_defconfig : passed 1:56.37 seaboard tegra_defconfig : passed 1:08.11 seaboard multi_v7_defconfig : passed 1:21.39 snow exynos_defconfig : passed 1:36.10 snowball u8500_defconfig : passed 2:48.56 trimslice tegra_defconfig : passed 1:03.57 trimslice multi_v7_defconfig : passed 1:01.00 wandboard imx_v6_v7_defconfig : passed 1:08.74 wandboard multi_v7_defconfig : passed 1:14.64 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.201719] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.209895] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232865] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.240006] hub 1-0:1.0: USB hub found [ 1.243796] hub 1-0:1.0: 1 port detected [ 1.248117] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.253975] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262091] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282862] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289929] hub 2-0:1.0: USB hub found [ 1.293723] hub 2-0:1.0: 1 port detected [ 1.298045] SPEAr-ehci: EHCI SPEAr driver [ 1.302139] tegra-ehci: Tegra EHCI driver [ 1.306719] usbcore: registered new interface driver usb-storage [ 1.314056] mousedev: PS/2 mouse device common for all mice [ 1.320785] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329959] i2c /dev entries driver [ 1.335041] usbcore: registered new interface driver uvcvideo [ 1.340757] USB Video Class driver (1.1.1) [ 1.344866] gspca_main: v2.14.0 registered [ 1.351951] orion_wdt: Initial timeout 25 sec [ 1.357010] sdhci: Secure Digital Host Controller Interface driver [ 1.363179] sdhci: Copyright(c) Pierre Ossman [ 1.368001] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374246] usbcore: registered new interface driver usbhid [ 1.379793] usbhid: USB HID core driver [ 1.386514] TCP: cubic registered [ 1.389818] NET: Registered protocol family 17 [ 1.394463] Key type dns_resolver registered [ 1.398888] ThumbEE CPU extension supported. [ 1.403180] Registering SWP/SWPB emulation handler [ 1.407944] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413464] USB Power: 5000 mV [ 1.416949] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 00:06:50 UTC (1401062810) [ 1.427409] ALSA device list: [ 1.430362] No soundcards found. [ 1.434996] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440561] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-L0ZAeZ/tmpppgyjY-uImage tftp 0x01000000 tmp/snowball-L0ZAeZ/tmpppgyjY-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-L0ZAeZ/tmpppgyjY-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4694401 (47a181 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4694337 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next build: 396 warnings 0 failures (next/next-20140527)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 64ffa3d Add linux-next specific files for 20140527 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140527/ Runtime: 45m 31s Passed: 126 Failed: 0 Warnings: 396 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable 'ret' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 11 include/linux/bitops.h:48) [-Wdeprecated-declarations] 14 include/linux/bitops.h:40) [-Wdeprecated-declarations] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] 122 arch/arm/include/asm/psci.h:44:1: warning: no return statement in function returning non-void [-Wreturn-type] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2d0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b90): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 6 months

arm-soc boot: 55 pass, 0 fail (v3.15-rc6-1172-gf10ccd5)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc6-1172-gf10ccd5 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.4 sec: PASS da850-evm 0 min 19.6 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 24.9 sec: PASS tegra30-beaver 0 min 21.3 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 25.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.4 sec: PASS omap5-uevm 1 min 46.8 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 16.5 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 22.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 23.0 sec: PASS imx6q-wandboard 0 min 21.6 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 52.9 sec: PASS am335x-boneblack 0 min 29.9 sec: PASS omap3-beagle-xm 1 min 2.5 sec: PASS legacy,3530beagle 0 min 39.1 sec: PASS (Warnings: 1) omap4-panda 1 min 12.9 sec: PASS omap3-overo-tobi 0 min 27.8 sec: PASS (Warnings: 1) am335x-bone 0 min 31.6 sec: PASS omap3-overo-storm-tobi 0 min 29.4 sec: PASS omap5-uevm 1 min 13.4 sec: PASS (Warnings: 6) omap3-n900 0 min 21.6 sec: PASS (Warnings: 1) legacy,n900 0 min 20.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 9.8 sec: PASS legacy,3730storm 0 min 23.8 sec: PASS legacy,3530overo 0 min 25.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 21.4 sec: PASS ste-snowball 1 min 21.8 sec: PASS tegra30-beaver 0 min 23.7 sec: PASS am335x-boneblack 0 min 27.9 sec: PASS omap3-beagle-xm 0 min 54.0 sec: PASS sun7i-a20-cubieboard2 0 min 16.5 sec: PASS armada-370-mirabox 0 min 26.5 sec: PASS omap4-panda 0 min 59.7 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.5 sec: PASS sun4i-a10-cubieboard 0 min 23.5 sec: PASS bcm28155-ap 0 min 30.1 sec: PASS omap3-overo-tobi 0 min 26.1 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 22.4 sec: PASS am335x-bone 0 min 30.8 sec: PASS omap3-overo-storm-tobi 0 min 24.6 sec: PASS omap5-uevm 1 min 47.5 sec: PASS (Warnings: 6) omap3-n900 0 min 19.0 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 21.4 sec: PASS omap4-panda-es 0 min 60.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 22.4 sec: PASS tegra124-jetson-tk1 0 min 24.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.9 sec: PASS sun4i-a10-cubieboard 0 min 21.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 26.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.4 sec: PASS exynos5250-arndale 0 min 33.6 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 35.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.6 sec: PASS armada-370-mirabox 0 min 24.5 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 21.1 sec: PASS

10 years, 6 months

← Newer
1
...
4
5
6
7
8
9
10
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014