Kernel-build-reports May 2014

kernel-build-reports@lists.linaro.org

20 participants
299 discussions

arm-soc boot: 35 passed 2 failed (arm-soc/v3.15-rc6-1172-gf10ccd5)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:31.21 snowball multi_v7_defconfig : FAILED 1:11.59 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:13.55 arndale exynos_defconfig : passed 1:21.62 bbb omap2plus_defconfig : passed 1:35.78 bbb multi_v7_defconfig : passed 1:25.73 beaver tegra_defconfig : passed 1:07.90 beaver multi_v7_defconfig : passed 0:59.33 capri bcm_defconfig : passed 0:39.91 capri multi_v7_defconfig : passed 0:40.61 cubie sunxi_defconfig : passed 1:05.73 cubie multi_v7_defconfig : passed 1:14.90 cubie2 sunxi_defconfig : passed 1:04.66 cubie2 multi_v7_defconfig : passed 1:15.45 cubie2 multi_lpae_defconfig : passed 1:09.86 dalmore tegra_defconfig : passed 1:25.78 dalmore multi_v7_defconfig : passed 1:22.49 dalmore multi_lpae_defconfig : passed 1:33.04 hummingboard imx_v6_v7_defconfig : passed 1:28.94 hummingboard multi_v7_defconfig : passed 1:09.78 jetson tegra_defconfig : passed 1:08.23 jetson multi_v7_defconfig : passed 1:01.89 jetson multi_lpae_defconfig : passed 0:59.15 omap5uevm omap2plus_defconfig : warnings 1:05.16 omap5uevm multi_v7_defconfig : warnings 2:00.38 omap5uevm multi_lpae_defconfig : warnings 1:55.20 panda omap2plus_defconfig : warnings 1:42.02 panda multi_v7_defconfig : passed 2:03.54 sama5 sama5_defconfig : passed 1:58.24 seaboard tegra_defconfig : passed 1:10.51 seaboard multi_v7_defconfig : passed 1:11.08 snow exynos_defconfig : passed 1:44.87 snowball u8500_defconfig : passed 2:37.67 trimslice tegra_defconfig : passed 1:06.45 trimslice multi_v7_defconfig : passed 0:59.94 wandboard imx_v6_v7_defconfig : passed 1:05.50 wandboard multi_v7_defconfig : passed 1:10.39 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.248504] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254362] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262487] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.283240] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.290315] hub 2-0:1.0: USB hub found [ 1.294114] hub 2-0:1.0: 1 port detected [ 1.298423] SPEAr-ehci: EHCI SPEAr driver [ 1.302515] tegra-ehci: Tegra EHCI driver [ 1.307103] usbcore: registered new interface driver usb-storage [ 1.314445] mousedev: PS/2 mouse device common for all mice [ 1.321234] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330401] i2c /dev entries driver [ 1.335468] usbcore: registered new interface driver uvcvideo [ 1.341185] USB Video Class driver (1.1.1) [ 1.345292] gspca_main: v2.14.0 registered [ 1.352532] orion_wdt: Initial timeout 25 sec [ 1.357687] sdhci: Secure Digital Host Controller Interface driver [ 1.363857] sdhci: Copyright(c) Pierre Ossman [ 1.368802] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.375046] usbcore: registered new interface driver usbhid [ 1.380592] usbhid: USB HID core driver [ 1.387386] TCP: cubic registered [ 1.390687] NET: Registered protocol family 17 [ 1.395182] can: controller area network core (rev 20120528 abi 9) [ 1.401395] NET: Registered protocol family 29 [ 1.405841] can: raw protocol (rev 20120528) [ 1.410090] can: broadcast manager protocol (rev 20120528 t) [ 1.415743] can: netlink gateway (rev 20130117) max_hops=1 [ 1.421581] Key type dns_resolver registered [ 1.426037] ThumbEE CPU extension supported. [ 1.430292] Registering SWP/SWPB emulation handler [ 1.435076] PJ4 iWMMXt v2 coprocessor enabled. [ 1.440565] USB Power: 5000 mV [ 1.444089] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 23:23:10 UTC (1401146590) [ 1.454537] ALSA device list: [ 1.457488] No soundcards found. [ 1.461397] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467004] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-hzeN6S/tmpN5Bzli-uImage tftp 0x01000000 tmp/snowball-hzeN6S/tmpN5Bzli-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-hzeN6S/tmpN5Bzli-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4733505 (483a41 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4733441 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 6 months

arm-soc build: 12 warnings 0 failures (arm-soc/v3.15-rc6-1172-gf10ccd5)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: f10ccd5 arm: soc: document merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc6-1172-gf10ccd5/ Runtime: 44m 27s Passed: 126 Failed: 0 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 6 months

arm-soc boot: 55 pass, 0 fail (v3.15-rc6-1085-gb9b8e3e)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc6-1085-gb9b8e3e Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 21.6 sec: PASS da850-evm 0 min 19.6 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 24.9 sec: PASS tegra30-beaver 0 min 21.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 25.3 sec: PASS armada-xp-openblocks-ax3-4 0 min 29.5 sec: PASS omap5-uevm 1 min 40.5 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 16.6 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 23.1 sec: PASS imx6dl-wandboard,wand-solo 0 min 23.1 sec: PASS imx6q-wandboard 0 min 21.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 54.2 sec: PASS am335x-boneblack 0 min 30.0 sec: PASS omap3-beagle-xm 1 min 5.1 sec: PASS legacy,3530beagle 0 min 35.2 sec: PASS (Warnings: 1) omap4-panda 1 min 9.8 sec: PASS omap3-overo-tobi 0 min 27.6 sec: PASS (Warnings: 1) am335x-bone 0 min 31.6 sec: PASS omap3-overo-storm-tobi 0 min 29.0 sec: PASS omap5-uevm 1 min 8.6 sec: PASS (Warnings: 6) omap3-n900 0 min 21.8 sec: PASS (Warnings: 1) legacy,n900 0 min 21.9 sec: PASS (Warnings: 1) omap4-panda-es 1 min 13.8 sec: PASS legacy,3730storm 0 min 27.1 sec: PASS legacy,3530overo 0 min 25.4 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 23.2 sec: PASS ste-snowball 1 min 22.2 sec: PASS tegra30-beaver 0 min 23.7 sec: PASS am335x-boneblack 0 min 28.6 sec: PASS omap3-beagle-xm 0 min 53.7 sec: PASS sun7i-a20-cubieboard2 0 min 16.5 sec: PASS armada-370-mirabox 0 min 26.5 sec: PASS omap4-panda 1 min 0.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 30.4 sec: PASS sun4i-a10-cubieboard 0 min 23.4 sec: PASS bcm28155-ap 0 min 29.8 sec: PASS omap3-overo-tobi 0 min 26.5 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 22.3 sec: PASS am335x-bone 0 min 30.9 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 1 min 45.0 sec: PASS (Warnings: 6) omap3-n900 0 min 20.3 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 21.3 sec: PASS omap4-panda-es 0 min 55.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 22.3 sec: PASS tegra124-jetson-tk1 0 min 25.9 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 14.9 sec: PASS sun4i-a10-cubieboard 0 min 16.9 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 27.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 36.9 sec: PASS exynos5250-arndale 0 min 32.5 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 39.6 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 26.8 sec: PASS armada-370-mirabox 0 min 24.8 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 21.3 sec: PASS

10 years, 7 months

arm-soc boot: 32 passed 3 failed (arm-soc/v3.15-rc6-1085-gb9b8e3e)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:35.02 seaboard multi_v7_defconfig : FAILED 2:06.08 snowball multi_v7_defconfig : FAILED 1:12.09 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.89 arndale exynos_defconfig : passed 1:20.15 bbb omap2plus_defconfig : passed 1:32.77 beaver tegra_defconfig : passed 0:59.70 beaver multi_v7_defconfig : passed 1:01.74 capri bcm_defconfig : passed 0:39.57 capri multi_v7_defconfig : passed 0:41.10 cubie sunxi_defconfig : passed 1:10.18 cubie multi_v7_defconfig : passed 1:17.44 cubie2 sunxi_defconfig : passed 0:57.06 cubie2 multi_v7_defconfig : passed 1:09.27 cubie2 multi_lpae_defconfig : passed 0:58.61 dalmore tegra_defconfig : passed 1:22.90 dalmore multi_v7_defconfig : passed 1:25.23 hummingboard imx_v6_v7_defconfig : passed 1:27.89 hummingboard multi_v7_defconfig : passed 1:10.72 jetson tegra_defconfig : passed 1:09.29 jetson multi_v7_defconfig : passed 1:03.13 jetson multi_lpae_defconfig : passed 1:07.13 omap5uevm omap2plus_defconfig : warnings 1:02.89 omap5uevm multi_v7_defconfig : warnings 1:58.39 omap5uevm multi_lpae_defconfig : warnings 1:56.98 panda omap2plus_defconfig : warnings 1:46.29 panda multi_v7_defconfig : passed 1:58.92 sama5 sama5_defconfig : passed 1:53.50 seaboard tegra_defconfig : passed 1:18.26 snow exynos_defconfig : passed 1:39.40 snowball u8500_defconfig : passed 3:30.24 trimslice tegra_defconfig : passed 1:08.55 trimslice multi_v7_defconfig : passed 1:07.41 wandboard imx_v6_v7_defconfig : passed 1:17.14 wandboard multi_v7_defconfig : passed 1:11.43 Offline boards: bbb multi_v7_defconfig : OFFLINE 0:52.85 dalmore multi_lpae_defconfig : OFFLINE 1:15.88 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.248806] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254663] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262779] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.283535] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.290614] hub 2-0:1.0: USB hub found [ 1.294414] hub 2-0:1.0: 1 port detected [ 1.298729] SPEAr-ehci: EHCI SPEAr driver [ 1.302828] tegra-ehci: Tegra EHCI driver [ 1.307419] usbcore: registered new interface driver usb-storage [ 1.314772] mousedev: PS/2 mouse device common for all mice [ 1.321558] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330723] i2c /dev entries driver [ 1.335795] usbcore: registered new interface driver uvcvideo [ 1.341513] USB Video Class driver (1.1.1) [ 1.345621] gspca_main: v2.14.0 registered [ 1.353248] orion_wdt: Initial timeout 25 sec [ 1.358408] sdhci: Secure Digital Host Controller Interface driver [ 1.364573] sdhci: Copyright(c) Pierre Ossman [ 1.369515] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.375757] usbcore: registered new interface driver usbhid [ 1.381300] usbhid: USB HID core driver [ 1.388097] TCP: cubic registered [ 1.391405] NET: Registered protocol family 17 [ 1.395900] can: controller area network core (rev 20120528 abi 9) [ 1.402112] NET: Registered protocol family 29 [ 1.406559] can: raw protocol (rev 20120528) [ 1.410808] can: broadcast manager protocol (rev 20120528 t) [ 1.416461] can: netlink gateway (rev 20130117) max_hops=1 [ 1.422312] Key type dns_resolver registered [ 1.426760] ThumbEE CPU extension supported. [ 1.431020] Registering SWP/SWPB emulation handler [ 1.435802] PJ4 iWMMXt v2 coprocessor enabled. [ 1.441340] USB Power: 5000 mV [ 1.444867] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 22:00:02 UTC (1401141602) [ 1.455323] ALSA device list: [ 1.458275] No soundcards found. [ 1.462184] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467792] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ERR] [ 1.366446] sbs-battery 5-000b: sbs_probe: Failed to get device status [ERR] [ 1.628874] isl29018 0-0044: regmap initialization failed: -121 [ERR] [ 1.857267] tegra-snd-wm8903 sound.7: ASoC: no source widget found for Playback [ERR] [ 1.864590] tegra-snd-wm8903 sound.7: ASoC: no source widget found for Capture [ERR] [ 1.966234] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ERR] [ 23.684629] irq 122: nobody cared (try booting with the "irqpoll" option) [ERR] [ 23.924148] handlers: [ERR] [ 23.926419] [<c04bc88c>] serial8250_interrupt root@seaboard:~#dmesg -l warn | awk '{ print "[WARN] " $0 }' dmesg -l warn | awk '{ print "[WARN] " $0 }' [WARN] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 [WARN] [ 0.000000] Memory: 963352K/1048576K available (6207K kernel code, 804K rwdata, 2472K rodata, 560K init, 298K bss, 85224K reserved, 270336K highmem) [WARN] [ 0.062168] CPU1: Booted secondary processor [WARN] [ 0.148780] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [WARN] [ 0.183806] bounce pool size: 64 pages [WARN] [ 1.372961] sbs-battery: probe of 5-000b failed with error -121 [WARN] [ 1.379329] 3-004c supply vcc not found, using dummy regulator [WARN] [ 1.386821] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 1200000 KHz [WARN] [ 1.396311] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [WARN] [ 1.430548] mmc0: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.501531] mmc1: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.560782] mmc2: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.622433] isl29018 0-0044: No cache defaults, reading back from HW [WARN] [ 1.634799] isl29018: probe of 0-0044 failed with error -121 [WARN] [ 1.819697] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [WARN] [ 1.833468] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.841869] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.927946] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [WARN] [ 1.973242] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [WARN] [ 5.394864] EXT4-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [WARN] [ 23.691412] CPU: 0 PID: 1561 Comm: apache2 Not tainted 3.15.0-rc6-01085-gb9b8e3e #1 [WARN] [ 23.699083] [<c0215bf4>] (unwind_backtrace) from [<c02117a8>] (show_stack+0x10/0x14) [WARN] [ 23.706819] [<c02117a8>] (show_stack) from [<c07db238>] (dump_stack+0x88/0x98) [WARN] [ 23.714032] [<c07db238>] (dump_stack) from [<c02859c8>] (__report_bad_irq+0x28/0xc0) [WARN] [ 23.721763] [<c02859c8>] (__report_bad_irq) from [<c0285f28>] (note_interrupt+0x214/0x264) [WARN] [ 23.730021] [<c0285f28>] (note_interrupt) from [<c0283ad0>] (handle_irq_event_percpu+0xb8/0x130) [WARN] [ 23.738793] [<c0283ad0>] (handle_irq_event_percpu) from [<c0283b88>] (handle_irq_event+0x40/0x60) [WARN] [ 23.747650] [<c0283b88>] (handle_irq_event) from [<c0286be4>] (handle_fasteoi_irq+0xa8/0x1a4) [WARN] [ 23.~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'. ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $tftp 0x01000000 tmp/snowball-joi4Ya/tmpSdELFR-uImage tftp 0x01000000 tmp/snowball-joi4Ya/tmpSdELFR-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-joi4Ya/tmpSdELFR-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4733889 (483bc1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4733825 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

arm-soc build: 12 warnings 1 failures (arm-soc/v3.15-rc6-1085-gb9b8e3e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: b9b8e3e Merge branch 'next/drivers' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc6-1085-gb9b8e3e/ Runtime: 44m 23s Passed: 125 Failed: 1 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: s3c2410_defconfig ------------------------------------------------------------------------------- Errors: s3c2410_defconfig: drivers/clk/samsung/clk-s3c2410-dclk.c:146:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before ')' token drivers/clk/samsung/clk-s3c2410-dclk.c:384:27: error: 'clkout1_s3c2412_p' undeclared here (not in a function) drivers/clk/samsung/clk-s3c2410-dclk.c:385:103: error: bit-field '<anonymous>' width not an integer constant Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

arm-soc boot: 35 passed 2 failed (arm-soc/v3.15-rc6-953-gf413645)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:32.64 snowball multi_v7_defconfig : FAILED 1:15.72 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.42 arndale exynos_defconfig : passed 1:20.97 bbb omap2plus_defconfig : passed 1:33.38 bbb multi_v7_defconfig : passed 1:12.60 beaver tegra_defconfig : passed 0:55.57 beaver multi_v7_defconfig : passed 0:52.83 capri bcm_defconfig : passed 0:41.47 capri multi_v7_defconfig : passed 0:41.00 cubie sunxi_defconfig : passed 1:24.94 cubie multi_v7_defconfig : passed 1:07.04 cubie2 sunxi_defconfig : passed 0:59.67 cubie2 multi_v7_defconfig : passed 1:07.21 cubie2 multi_lpae_defconfig : passed 1:20.35 dalmore tegra_defconfig : passed 1:21.93 dalmore multi_v7_defconfig : passed 1:24.02 dalmore multi_lpae_defconfig : passed 1:30.47 hummingboard imx_v6_v7_defconfig : passed 1:27.70 hummingboard multi_v7_defconfig : passed 1:15.34 jetson tegra_defconfig : passed 0:56.88 jetson multi_v7_defconfig : passed 1:10.30 jetson multi_lpae_defconfig : passed 1:02.58 omap5uevm omap2plus_defconfig : passed 1:02.96 omap5uevm multi_v7_defconfig : passed 1:57.37 omap5uevm multi_lpae_defconfig : passed 1:51.87 panda omap2plus_defconfig : warnings 1:32.27 panda multi_v7_defconfig : passed 1:49.82 sama5 sama5_defconfig : passed 1:53.06 seaboard tegra_defconfig : passed 1:03.00 seaboard multi_v7_defconfig : passed 1:11.15 snow exynos_defconfig : passed 1:37.76 snowball u8500_defconfig : passed 3:58.36 trimslice tegra_defconfig : passed 1:57.97 trimslice multi_v7_defconfig : passed 1:07.24 wandboard imx_v6_v7_defconfig : passed 1:11.26 wandboard multi_v7_defconfig : passed 1:07.66 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.248790] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254639] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262755] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.283516] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.290593] hub 2-0:1.0: USB hub found [ 1.294391] hub 2-0:1.0: 1 port detected [ 1.298703] SPEAr-ehci: EHCI SPEAr driver [ 1.302795] tegra-ehci: Tegra EHCI driver [ 1.307382] usbcore: registered new interface driver usb-storage [ 1.314722] mousedev: PS/2 mouse device common for all mice [ 1.321499] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330658] i2c /dev entries driver [ 1.335719] usbcore: registered new interface driver uvcvideo [ 1.341438] USB Video Class driver (1.1.1) [ 1.345546] gspca_main: v2.14.0 registered [ 1.352672] orion_wdt: Initial timeout 25 sec [ 1.357825] sdhci: Secure Digital Host Controller Interface driver [ 1.363989] sdhci: Copyright(c) Pierre Ossman [ 1.368930] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.375167] usbcore: registered new interface driver usbhid [ 1.380706] usbhid: USB HID core driver [ 1.387485] TCP: cubic registered [ 1.390785] NET: Registered protocol family 17 [ 1.395278] can: controller area network core (rev 20120528 abi 9) [ 1.401492] NET: Registered protocol family 29 [ 1.405938] can: raw protocol (rev 20120528) [ 1.410188] can: broadcast manager protocol (rev 20120528 t) [ 1.415832] can: netlink gateway (rev 20130117) max_hops=1 [ 1.421675] Key type dns_resolver registered [ 1.426121] ThumbEE CPU extension supported. [ 1.430382] Registering SWP/SWPB emulation handler [ 1.435165] PJ4 iWMMXt v2 coprocessor enabled. [ 1.440645] USB Power: 5000 mV [ 1.444170] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 21:21:15 UTC (1401139275) [ 1.454624] ALSA device list: [ 1.457578] No soundcards found. [ 1.461490] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467100] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 4 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-a6S0S4/tmp8NCdjw-uImage tftp 0x01000000 tmp/snowball-a6S0S4/tmp8NCdjw-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-a6S0S4/tmp8NCdjw-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4729249 (4829a1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4729185 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

arm-soc build: 12 warnings 1 failures (arm-soc/v3.15-rc6-953-gf413645)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: f413645 arm-soc: document fixups for build regressions Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc6-953-gf413645/ Runtime: 44m 18s Passed: 125 Failed: 1 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: s3c2410_defconfig ------------------------------------------------------------------------------- Errors: s3c2410_defconfig: drivers/clk/samsung/clk-s3c2410-dclk.c:146:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before ')' token drivers/clk/samsung/clk-s3c2410-dclk.c:384:27: error: 'clkout1_s3c2412_p' undeclared here (not in a function) drivers/clk/samsung/clk-s3c2410-dclk.c:385:103: error: bit-field '<anonymous>' width not an integer constant Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

arm-soc boot: 34 passed 3 failed (arm-soc/v3.15-rc6-944-g88048eb)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:31.22 snowball multi_v7_defconfig : FAILED 1:11.66 wandboard multi_v7_defconfig : FAILED 1:32.36 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.86 arndale exynos_defconfig : passed 1:20.45 bbb omap2plus_defconfig : passed 1:35.00 bbb multi_v7_defconfig : passed 1:21.85 beaver tegra_defconfig : passed 1:08.76 beaver multi_v7_defconfig : passed 0:58.08 capri bcm_defconfig : passed 0:39.37 capri multi_v7_defconfig : passed 0:41.21 cubie sunxi_defconfig : passed 1:03.78 cubie multi_v7_defconfig : passed 1:27.33 cubie2 sunxi_defconfig : passed 1:11.40 cubie2 multi_v7_defconfig : passed 1:28.53 cubie2 multi_lpae_defconfig : passed 1:04.54 dalmore tegra_defconfig : passed 1:24.57 dalmore multi_v7_defconfig : passed 1:25.22 dalmore multi_lpae_defconfig : passed 1:22.26 hummingboard imx_v6_v7_defconfig : passed 1:35.42 hummingboard multi_v7_defconfig : passed 1:10.98 jetson tegra_defconfig : passed 1:01.18 jetson multi_v7_defconfig : passed 0:56.65 jetson multi_lpae_defconfig : passed 0:57.92 omap5uevm omap2plus_defconfig : passed 1:04.31 omap5uevm multi_v7_defconfig : passed 2:08.03 omap5uevm multi_lpae_defconfig : passed 1:54.39 panda omap2plus_defconfig : warnings 1:39.16 panda multi_v7_defconfig : passed 1:51.91 sama5 sama5_defconfig : passed 2:06.16 seaboard tegra_defconfig : passed 1:09.59 seaboard multi_v7_defconfig : passed 1:08.36 snow exynos_defconfig : passed 1:40.01 snowball u8500_defconfig : passed 2:18.58 trimslice tegra_defconfig : passed 1:02.47 trimslice multi_v7_defconfig : passed 1:02.68 wandboard imx_v6_v7_defconfig : passed 1:10.10 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.248668] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254524] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262641] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.283402] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.290479] hub 2-0:1.0: USB hub found [ 1.294278] hub 2-0:1.0: 1 port detected [ 1.298588] SPEAr-ehci: EHCI SPEAr driver [ 1.302681] tegra-ehci: Tegra EHCI driver [ 1.307267] usbcore: registered new interface driver usb-storage [ 1.314604] mousedev: PS/2 mouse device common for all mice [ 1.321382] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330542] i2c /dev entries driver [ 1.335608] usbcore: registered new interface driver uvcvideo [ 1.341323] USB Video Class driver (1.1.1) [ 1.345432] gspca_main: v2.14.0 registered [ 1.352659] orion_wdt: Initial timeout 25 sec [ 1.357815] sdhci: Secure Digital Host Controller Interface driver [ 1.363978] sdhci: Copyright(c) Pierre Ossman [ 1.368914] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.375157] usbcore: registered new interface driver usbhid [ 1.380696] usbhid: USB HID core driver [ 1.387471] TCP: cubic registered [ 1.390774] NET: Registered protocol family 17 [ 1.395268] can: controller area network core (rev 20120528 abi 9) [ 1.401481] NET: Registered protocol family 29 [ 1.405928] can: raw protocol (rev 20120528) [ 1.410178] can: broadcast manager protocol (rev 20120528 t) [ 1.415830] can: netlink gateway (rev 20130117) max_hops=1 [ 1.421667] Key type dns_resolver registered [ 1.426120] ThumbEE CPU extension supported. [ 1.430380] Registering SWP/SWPB emulation handler [ 1.435164] PJ4 iWMMXt v2 coprocessor enabled. [ 1.440636] USB Power: 5000 mV [ 1.444159] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-05-26 20:29:06 UTC (1401136146) [ 1.454614] ALSA device list: [ 1.457567] No soundcards found. [ 1.461471] ata1: SATA link down (SStatus 0 SControl F300) [ 1.467084] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- BOOTP broadcast 3 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.147 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x01000000 tmp/snowball-8kSqyK/tmpaS_3sH-uImage tftp 0x01000000 tmp/snowball-8kSqyK/tmpaS_3sH-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.147 Filename 'tmp/snowball-8kSqyK/tmpaS_3sH-uImage'. Load address: 0x1000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ############################################################### done Bytes transferred = 4729313 (4829e1 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x01000000 bootm 0x01000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4729249 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 1 model name : ARMv7 Processor rev 10 (v7l) Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 2 model name : ARMv7 Processor rev 10 (v7l) Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 processor : 3 model name : ARMv7 Processor rev 10 (v7l) Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x2 CPU part : 0xc09 CPU revision : 10 Hardware : Freescale i.MX6 Quad/DualLite (Device Tree) Revision : 0000 Serial : 0000000000000000 root@wandboard:~# ip -f inet -o addr ip -f inet -o addr 1: lo inet 127.0.0.1/8 scope host lo\ valid_lft forever preferred_lft forever 2: eth0 inet 172.16.1.129/24 brd 172.16.1.255 scope global eth0\ valid_lft forever preferred_lft forever root@wandboard:# ~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: ip -f inet -o addr.

10 years, 7 months

arm-soc build: 12 warnings 1 failures (arm-soc/v3.15-rc6-944-g88048eb)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 88048eb Merge branch 'next/cleanup' into for-next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-rc6-944-g88048eb/ Runtime: 44m 42s Passed: 125 Failed: 1 Warnings: 12 Section mismatches: 2 ------------------------------------------------------------------------------- Failed defconfigs: s3c2410_defconfig ------------------------------------------------------------------------------- Errors: s3c2410_defconfig: drivers/clk/samsung/clk-s3c2410-dclk.c:146:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before ')' token drivers/clk/samsung/clk-s3c2410-dclk.c:384:27: error: 'clkout1_s3c2412_p' undeclared here (not in a function) drivers/clk/samsung/clk-s3c2410-dclk.c:385:103: error: bit-field '<anonymous>' width not an integer constant Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2e0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1ba0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe()

10 years, 7 months

next build: 434 warnings 0 failures (next/next-20140526)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 531a533 Add linux-next specific files for 20140526 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140526/ Runtime: 45m 14s Passed: 126 Failed: 0 Warnings: 434 Section mismatches: 50 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 arch/arm/mach-msm/board-trout-gpio.c:120:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:135:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:151:2: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:181:3: warning: passing argument 1 of '__raw_readb' makes pointer from integer without a cast [enabled by default] 1 arch/arm/mach-msm/board-trout-gpio.c:184:4: warning: passing argument 2 of '__raw_writeb' makes pointer from integer without a cast [enabled by default] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable 'ret' [-Wunused-variable] 1 drivers/usb/host/xhci-plat.c:206:12: warning: 'xhci_plat_suspend' defined but not used [-Wunused-function] 1 drivers/usb/host/xhci-plat.c:214:12: warning: 'xhci_plat_resume' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 11 include/linux/bitops.h:48) [-Wdeprecated-declarations] 14 include/linux/bitops.h:40) [-Wdeprecated-declarations] 38 drivers/of/of_mdio.c:49:6: warning: unused variable 'max_speed' [-Wunused-variable] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] 122 arch/arm/include/asm/psci.h:44:1: warning: no return statement in function returning non-void [-Wreturn-type] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2d0): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b90): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12728): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12730): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12738): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12740): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12748): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12750): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12758): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12760): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12768): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12770): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12778): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/built-in.o(.data+0x12780): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1e4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1ec): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1f4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x1fc): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x204): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x20c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x214): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x21c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x224): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x22c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x234): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/built-in.o(.data+0x23c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x15c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x164): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x16c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x174): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x17c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x184): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x18c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x194): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x19c): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1a4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1ac): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: drivers/clk/samsung/built-in.o(.data+0x1b4): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28248): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28250): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28258): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28260): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28268): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28270): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28278): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28280): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28288): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28290): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x28298): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown) 1 s3c2410_defconfig WARNING: vmlinux.o(.data+0x282a0): Section mismatch in reference from the variable dclk_variants to the (unknown reference) .init.data:(unknown)

10 years, 7 months

← Newer
1
...
5
6
7
8
9
10
11
...
30
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports May 2014