Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline build: 269 warnings 0 failures (mainline/v3.16-rc1)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 7171511 Linux 3.16-rc1 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.16-rc1/ Runtime: 46m 0s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

next boot: 29 passed 12 failed (next/next-20140616)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:26.83 capri bcm_defconfig : FAILED 1:25.20 capri multi_v7_defconfig : FAILED 1:26.50 cubox multi_v7_defconfig : FAILED 1:35.66 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.68 hummingboard multi_v7_defconfig : FAILED 1:28.60 jetson multi_v7_defconfig : FAILED 1:28.64 jetson multi_lpae_defconfig : FAILED 1:28.66 seaboard multi_v7_defconfig : FAILED 0:35.35 snowball u8500_defconfig : FAILED 1:44.35 wandboard multi_v7_defconfig : FAILED 1:36.70 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.15 arndale exynos_defconfig : passed 1:19.36 arndale multi_v7_defconfig : passed 1:27.82 arndale multi_lpae_defconfig : passed 1:23.54 bbb omap2plus_defconfig : passed 1:29.67 bbb multi_v7_defconfig : passed 1:26.40 beaver tegra_defconfig : passed 0:52.80 cubie sunxi_defconfig : passed 1:16.15 cubie multi_v7_defconfig : passed 1:40.24 cubie2 sunxi_defconfig : warnings 1:06.31 cubie2 multi_v7_defconfig : warnings 1:27.75 cubie2 multi_lpae_defconfig : warnings 1:24.56 dalmore tegra_defconfig : passed 1:21.70 hummingboard imx_v6_v7_defconfig : warnings 1:12.08 jetson tegra_defconfig : passed 0:58.86 omap5uevm omap2plus_defconfig : warnings 1:03.24 omap5uevm multi_v7_defconfig : warnings 2:04.28 omap5uevm multi_lpae_defconfig : warnings 1:59.68 panda omap2plus_defconfig : warnings 1:36.40 panda multi_v7_defconfig : warnings 1:46.63 sama5 sama5_defconfig : warnings 2:00.45 seaboard tegra_defconfig : passed 1:10.02 snow exynos_defconfig : passed 0:58.79 snow multi_v7_defconfig : passed 1:00.46 snow multi_lpae_defconfig : passed 1:00.60 snowball multi_v7_defconfig : passed 3:17.73 trimslice tegra_defconfig : passed 2:15.27 trimslice multi_v7_defconfig : passed 0:54.66 wandboard imx_v6_v7_defconfig : passed 1:11.66 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.590781] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.596875] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.601839] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.607931] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.615682] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.622789] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.628385] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.634771] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.644768] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.655297] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.661925] [drm] No driver support for vblank timestamp query. [ 3.667876] host1x drm: No connectors reported connected with modes [ 3.674142] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.698038] Console: switching to colour frame buffer device 128x48 [ 3.709773] host1x drm: fb0: frame buffer device [ 3.714469] host1x drm: registered panic notifier [ 3.733636] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.739908] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.747367] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.758871] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.764276] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.772069] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.783243] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.789584] hub 1-0:1.0: USB hub found [ 3.793361] hub 1-0:1.0: 1 port detected [ 3.797738] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.803157] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.810913] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.823624] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.829914] hub 2-0:1.0: USB hub found [ 3.833686] hub 2-0:1.0: 1 port detected [ 3.841649] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.854460] usb1_vbus: disabling [ 3.857869] ALSA device list: [ 3.860865] #0: NVIDIA Tegra Beaver [ 3.865106] Waiting for root device /dev/mmcblk0p1... [ 4.143647] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.612394] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 2500 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226121] hub 2-0:1.0: 1 port detected [ 1.230496] SPEAr-ehci: EHCI SPEAr driver [ 1.234605] tegra-ehci: Tegra EHCI driver [ 1.238734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244915] ohci-pci: OHCI PCI platform driver [ 1.249415] ohci-platform: OHCI generic platform driver [ 1.254729] ohci-omap3: OHCI OMAP3 driver [ 1.258826] SPEAr-ohci: OHCI SPEAr driver [ 1.263554] usbcore: registered new interface driver usb-storage [ 1.271081] mousedev: PS/2 mouse device common for all mice [ 1.278056] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287390] i2c /dev entries driver [ 1.292871] usbcore: registered new interface driver uvcvideo [ 1.298624] USB Video Class driver (1.1.1) [ 1.302726] gspca_main: v2.14.0 registered [ 1.309988] orion_wdt: Initial timeout 25 sec [ 1.315527] sdhci: Secure Digital Host Controller Interface driver [ 1.321690] sdhci: Copyright(c) Pierre Ossman [ 1.326623] Synopsys Designware Multimedia Card Interface Driver [ 1.333324] usbcore: registered new interface driver usbhid [ 1.338884] usbhid: USB HID core driver [ 1.346712] TCP: cubic registered [ 1.350025] NET: Registered protocol family 17 [ 1.354493] can: controller area network core (rev 20120528 abi 9) [ 1.360734] NET: Registered protocol family 29 [ 1.365161] can: raw protocol (rev 20120528) [ 1.369433] can: broadcast manager protocol (rev 20120528 t) [ 1.375086] can: netlink gateway (rev 20130117) max_hops=1 [ 1.380962] Key type dns_resolver registered [ 1.385434] ThumbEE CPU extension supported. [ 1.389699] Registering SWP/SWPB emulation handler [ 1.394488] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399197] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405686] USB Power: 5000 mV [ 1.409193] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 04:06:58 UTC (1402891618) [ 1.419713] ALSA device list: [ 1.422689] No soundcards found. [ 1.426613] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.975235] i2c 0-004c: Driver lm90 requests probe deferral [ 2.982639] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.988243] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.998186] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.004650] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.015047] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.020674] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.030624] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.047117] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.056628] hub 1-0:1.0: USB hub found [ 3.060791] hub 1-0:1.0: 1 port detected [ 3.067073] i2c 0-004c: Driver lm90 requests probe deferral [ 3.074510] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.080137] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.090163] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.096670] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.108686] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.117129] i2c 0-004c: Driver lm90 requests probe deferral [ 3.122817] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.159240] VDD_5V0_HDMI_CON: disabling [ 3.163199] vdd_cam_1v8_reg: disabling [ 3.167381] vdd_hdmi_5v0: disabling [ 3.170913] usb1_vbus: disabling [ 3.174269] dvdd_ts: disabling [ 3.181590] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.182339] ALSA device list: [ 3.182355] #0: NVIDIA Tegra Dalmore [ 3.194027] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.196992] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.197233] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.217043] Waiting for root device /dev/mmcblk0p1... [ 3.387257] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.870535] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.882450] i2c 0-004c: Driver lm90 requests probe deferral [ 3.889965] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.895600] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.905435] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.911940] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.960630] i2c 0-004c: Driver lm90 requests probe deferral [ 2.968115] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.973724] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.983724] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.990187] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.000529] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.006176] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016150] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032368] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041729] hub 1-0:1.0: USB hub found [ 3.045741] hub 1-0:1.0: 1 port detected [ 3.051775] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059059] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064606] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074557] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.080990] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092671] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100867] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108536] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.108707] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108788] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.111786] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.112156] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.181850] VDD_5V0_HDMI_CON: disabling [ 3.185822] vdd_cam_1v8_reg: disabling [ 3.190036] vdd_hdmi_5v0: disabling [ 3.193744] usb1_vbus: disabling [ 3.197063] dvdd_ts: disabling [ 3.202270] ALSA device list: [ 3.205297] #0: NVIDIA Tegra Dalmore [ 3.211613] Waiting for root device /dev/mmcblk0p1... [ 3.397448] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.881101] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.892759] i2c 0-004c: Driver lm90 requests probe deferral [ 3.900289] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.905922] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.915754] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.922153] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.161951] usbcore: registered new interface driver usb-storage [ 1.173098] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.178309] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.183257] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.195792] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.201990] hub 1-0:1.0: USB hub found [ 1.205805] hub 1-0:1.0: 1 port detected [ 1.213487] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.218590] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.223516] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.235803] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.241956] hub 2-0:1.0: USB hub found [ 1.245751] hub 2-0:1.0: 1 port detected [ 1.250497] mousedev: PS/2 mouse device common for all mice [ 1.258756] i2c /dev entries driver [ 1.263479] usbcore: registered new interface driver uvcvideo [ 1.269259] USB Video Class driver (1.1.1) [ 1.273383] gspca_main: v2.14.0 registered [ 1.280201] sdhci: Secure Digital Host Controller Interface driver [ 1.286413] sdhci: Copyright(c) Pierre Ossman [ 1.291622] Synopsys Designware Multimedia Card Interface Driver [ 1.298626] usbcore: registered new interface driver usbhid [ 1.304228] usbhid: USB HID core driver [ 1.312878] TCP: cubic registered [ 1.316246] NET: Registered protocol family 17 [ 1.320720] can: controller area network core (rev 20120528 abi 9) [ 1.326980] NET: Registered protocol family 29 [ 1.331456] can: raw protocol (rev 20120528) [ 1.335741] can: broadcast manager protocol (rev 20120528 t) [ 1.341434] can: netlink gateway (rev 20130117) max_hops=1 [ 1.347332] Key type dns_resolver registered [ 1.351779] ThumbEE CPU extension supported. [ 1.356093] Registering SWP/SWPB emulation handler [ 1.362048] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.377248] ALSA device list: [ 1.380231] No soundcards found. [ 1.384328] Waiting for root device /dev/mmcblk0p2... [ 60.320916] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.248699] hub 1-0:1.0: USB hub found [ 2.252530] hub 1-0:1.0: 1 port detected [ 2.257547] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.265993] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.270544] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.278469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.285126] [drm] No driver support for vblank timestamp query. [ 2.291117] host1x drm: No connectors reported connected with modes [ 2.297414] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.312363] Console: switching to colour frame buffer device 128x48 [ 2.325882] host1x drm: fb0: frame buffer device [ 2.330614] host1x drm: registered panic notifier [ 2.346926] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.353496] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.358934] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.366745] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.381914] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.388720] hub 2-0:1.0: USB hub found [ 2.392531] hub 2-0:1.0: 1 port detected [ 2.397633] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.404964] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.422948] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.427497] +1.8V_RUN_VPP_FUSE: disabling [ 2.431914] +2.8V_RUN_CAM_AF: disabling [ 2.436096] +3.3V_RUN_TOUCH: disabling [ 2.440217] +1.05V_RUN_CAM_REAR: disabling [ 2.444683] +VDDIO_SDMMC3: disabling [ 2.448408] +1.2V_RUN_CAM_FRONT: disabling [ 2.452632] +2.8V_RUN_CAM: disabling [ 2.456322] +1.8V_RUN_CAM: disabling [ 2.460026] +1.05V_RUN: disabling [ 2.463473] +USB0_VBUS_SW: disabling [ 2.467058] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.471928] ALSA device list: [ 2.474890] #0: NVIDIA Tegra Jetson TK1 [ 2.479508] Waiting for root device /dev/mmcblk0p1... [ 2.701899] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.164491] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.243779] hub 1-0:1.0: USB hub found [ 2.247609] hub 1-0:1.0: 1 port detected [ 2.252595] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261040] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265590] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280171] [drm] No driver support for vblank timestamp query. [ 2.286162] host1x drm: No connectors reported connected with modes [ 2.292458] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307526] Console: switching to colour frame buffer device 128x48 [ 2.321034] host1x drm: fb0: frame buffer device [ 2.325766] host1x drm: registered panic notifier [ 2.341961] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348526] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.353962] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361840] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.376980] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383779] hub 2-0:1.0: USB hub found [ 2.387592] hub 2-0:1.0: 1 port detected [ 2.392690] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400036] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.418110] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422657] +1.8V_RUN_VPP_FUSE: disabling [ 2.427072] +2.8V_RUN_CAM_AF: disabling [ 2.431254] +3.3V_RUN_TOUCH: disabling [ 2.435371] +1.05V_RUN_CAM_REAR: disabling [ 2.439615] +VDDIO_SDMMC3: disabling [ 2.443320] +1.2V_RUN_CAM_FRONT: disabling [ 2.447542] +2.8V_RUN_CAM: disabling [ 2.451234] +1.8V_RUN_CAM: disabling [ 2.454937] +1.05V_RUN: disabling [ 2.458382] +USB0_VBUS_SW: disabling [ 2.461966] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.466834] ALSA device list: [ 2.469797] #0: NVIDIA Tegra Jetson TK1 [ 2.474413] Waiting for root device /dev/mmcblk0p1... [ 2.696968] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159762] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120565] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127180] hub 3-0:1.0: USB hub found [ 2.130982] hub 3-0:1.0: 1 port detected [ 2.135998] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143024] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 04:07:53 UTC (1402891673) [ 2.155645] vdd_1v2: disabling [ 2.158863] vdd_1v5: disabling [ 2.221969] ALSA device list: [ 2.224938] #0: NVIDIA Tegra Seaboard [ 2.229406] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237159] Please append a correct "root=" boot option; here are the available partitions: [ 2.245517] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253768] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140616 #1 [ 2.260916] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268659] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.275873] [<c0813db0>] (dump_stack) from [<c0810bf0>] (panic+0xa0/0x218) [ 2.282739] [<c0810bf0>] (panic) from [<c0adb0c4>] (mount_block_root+0x1a0/0x230) [ 2.290209] [<c0adb0c4>] (mount_block_root) from [<c0adb25c>] (mount_root+0x108/0x110) [ 2.298112] [<c0adb25c>] (mount_root) from [<c0adb3bc>] (prepare_namespace+0x158/0x1a0) [ 2.306102] [<c0adb3bc>] (prepare_namespace) from [<c0adad80>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.314958] [<c0adad80>] (kernel_init_freeable) from [<c080eee8>] (kernel_init+0x8/0xf0) [ 2.323038] [<c080eee8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330594] CPU1: stopping [ 2.333297] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140616 #1 [ 2.340431] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348168] [<c0211c68>] (show_stack) from [<c0813db0>] (dump_stack+0x88/0x98) [ 2.355380] [<c0813db0>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.362763] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370319] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.377783] Exception stack(0xea087f68 to 0xea087fb0) [ 2.382824] 7f60: 00000000 c0bc3fb4 c0bc3fb4 0000004c 8ae12190 00000000 [ 2.390985] 7f80: 8ae1f868 00000000 eafb6db0 ea086000 00000000 c0821050 00000015 ea087fb0 [ 2.399144] 7fa0: c06b3e9c c06b3ea8 60000113 ffffffff [ 2.404194] [<c02127c0>] (__irq_svc) from [<c06b3ea8>] (cpuidle_enter_state+0x68/0x100) [ 2.412193] [<c06b3ea8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.420964] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.427736] drm_kms_helper: panic occurred, switching back to text console [ 2.434619] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627502] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635406] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647338] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654663] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.666137] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674652] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686584] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693908] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705383] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713195] HS USB OTG: no transceiver configured [ 3.717895] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725738] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733673] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745605] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752899] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764404] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772918] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784851] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.792144] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803649] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811462] HS USB OTG: no transceiver configured [ 3.816162] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.824005] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831909] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843841] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.851165] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862640] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.871185] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.883117] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890411] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901885] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909698] HS USB OTG: no transceiver configured [ 3.914428] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922271] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.930175] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.942108] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949401] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960876] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.065076] ohci-platform: OHCI generic platform driver [ 1.070474] ohci-omap3: OHCI OMAP3 driver [ 1.074642] SPEAr-ohci: OHCI SPEAr driver [ 1.079460] usbcore: registered new interface driver usb-storage [ 1.090473] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095553] ci_hdrc ci_hdrc.0: no supported roles [ 1.100382] 2184200.usb supply vbus not found, using dummy regulator [ 1.110483] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115567] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120484] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132816] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139017] hub 1-0:1.0: USB hub found [ 1.142827] hub 1-0:1.0: 1 port detected [ 1.147538] mousedev: PS/2 mouse device common for all mice [ 1.155675] i2c /dev entries driver [ 1.160368] usbcore: registered new interface driver uvcvideo [ 1.166142] USB Video Class driver (1.1.1) [ 1.170266] gspca_main: v2.14.0 registered [ 1.177047] sdhci: Secure Digital Host Controller Interface driver [ 1.183253] sdhci: Copyright(c) Pierre Ossman [ 1.188459] Synopsys Designware Multimedia Card Interface Driver [ 1.195419] usbcore: registered new interface driver usbhid [ 1.201018] usbhid: USB HID core driver [ 1.209356] TCP: cubic registered [ 1.212696] NET: Registered protocol family 17 [ 1.217189] can: controller area network core (rev 20120528 abi 9) [ 1.223441] NET: Registered protocol family 29 [ 1.227914] can: raw protocol (rev 20120528) [ 1.232198] can: broadcast manager protocol (rev 20120528 t) [ 1.237887] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243766] Key type dns_resolver registered [ 1.248515] ThumbEE CPU extension supported. [ 1.252827] Registering SWP/SWPB emulation handler [ 1.258724] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273914] ALSA device list: [ 1.276899] No soundcards found. [ 1.280882] Waiting for root device /dev/mmcblk0p2... [ 60.322935] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next build: 444 warnings 0 failures (next/next-20140616)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: c6b4752 Add linux-next specific files for 20140616 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140616/ Runtime: 42m 30s Passed: 126 Failed: 0 Warnings: 444 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 86 mm/madvise.c:145:9: warning: unused variable 'orig_pte' [-Wunused-variable] 92 arch/arm/include/asm/pgtable.h:206:50: warning: value computed is not used [-Wunused-value] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25828): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df30): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x86070): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3deac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85aec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d97c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

mainline boot: 23 passed 18 failed (mainline/v3.15-12066-gdd1845a)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:30.63 capri bcm_defconfig : FAILED 1:24.17 capri multi_v7_defconfig : FAILED 1:24.69 cubox multi_v7_defconfig : FAILED 1:32.80 dalmore multi_v7_defconfig : FAILED 1:32.56 dalmore multi_lpae_defconfig : FAILED 1:31.19 hummingboard multi_v7_defconfig : FAILED 1:26.82 jetson multi_v7_defconfig : FAILED 1:26.25 jetson multi_lpae_defconfig : FAILED 1:26.04 omap5uevm omap2plus_defconfig : FAILED 1:45.52 omap5uevm multi_v7_defconfig : FAILED 1:49.52 omap5uevm multi_lpae_defconfig : FAILED 1:48.39 sama5 sama5_defconfig : FAILED 3:01.22 seaboard multi_v7_defconfig : FAILED 0:34.49 snow multi_v7_defconfig : FAILED 1:13.48 snow multi_lpae_defconfig : FAILED 1:14.15 snowball u8500_defconfig : FAILED 1:53.48 wandboard multi_v7_defconfig : FAILED 1:36.72 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.31 arndale exynos_defconfig : passed 1:18.36 arndale multi_v7_defconfig : passed 1:34.65 arndale multi_lpae_defconfig : passed 1:23.31 bbb omap2plus_defconfig : passed 1:35.09 bbb multi_v7_defconfig : passed 1:19.62 beaver tegra_defconfig : passed 1:02.05 cubie sunxi_defconfig : passed 1:30.77 cubie multi_v7_defconfig : passed 1:31.17 cubie2 sunxi_defconfig : passed 1:34.72 cubie2 multi_v7_defconfig : passed 1:23.46 cubie2 multi_lpae_defconfig : passed 1:43.05 dalmore tegra_defconfig : passed 1:31.17 hummingboard imx_v6_v7_defconfig : passed 1:30.79 jetson tegra_defconfig : passed 3:54.37 panda omap2plus_defconfig : warnings 1:30.22 panda multi_v7_defconfig : warnings 1:51.71 seaboard tegra_defconfig : passed 1:03.21 snow exynos_defconfig : passed 1:29.42 snowball multi_v7_defconfig : passed 5:07.91 trimslice tegra_defconfig : passed 3:56.67 trimslice multi_v7_defconfig : passed 3:49.93 wandboard imx_v6_v7_defconfig : passed 1:08.55 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.570573] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.576666] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.581631] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.587725] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.595477] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.602587] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.608180] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.614564] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.624561] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.634933] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.641562] [drm] No driver support for vblank timestamp query. [ 3.647512] host1x drm: No connectors reported connected with modes [ 3.653777] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.676854] Console: switching to colour frame buffer device 128x48 [ 3.688575] host1x drm: fb0: frame buffer device [ 3.693271] host1x drm: registered panic notifier [ 3.708604] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714871] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722326] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733836] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739243] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747044] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758211] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764568] hub 1-0:1.0: USB hub found [ 3.768346] hub 1-0:1.0: 1 port detected [ 3.772731] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778143] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785902] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798592] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804897] hub 2-0:1.0: USB hub found [ 3.808667] hub 2-0:1.0: 1 port detected [ 3.816600] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829406] usb1_vbus: disabling [ 3.832815] ALSA device list: [ 3.835812] #0: NVIDIA Tegra Beaver [ 3.840040] Waiting for root device /dev/mmcblk0p1... [ 4.118616] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587386] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1800 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225802] hub 2-0:1.0: 1 port detected [ 1.230175] SPEAr-ehci: EHCI SPEAr driver [ 1.234289] tegra-ehci: Tegra EHCI driver [ 1.238427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244614] ohci-pci: OHCI PCI platform driver [ 1.249121] ohci-platform: OHCI generic platform driver [ 1.254437] ohci-omap3: OHCI OMAP3 driver [ 1.258543] SPEAr-ohci: OHCI SPEAr driver [ 1.263285] usbcore: registered new interface driver usb-storage [ 1.270838] mousedev: PS/2 mouse device common for all mice [ 1.277859] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287181] i2c /dev entries driver [ 1.292810] usbcore: registered new interface driver uvcvideo [ 1.298560] USB Video Class driver (1.1.1) [ 1.302660] gspca_main: v2.14.0 registered [ 1.309948] orion_wdt: Initial timeout 25 sec [ 1.315414] sdhci: Secure Digital Host Controller Interface driver [ 1.321577] sdhci: Copyright(c) Pierre Ossman [ 1.326491] Synopsys Designware Multimedia Card Interface Driver [ 1.333178] usbcore: registered new interface driver usbhid [ 1.338736] usbhid: USB HID core driver [ 1.347393] TCP: cubic registered [ 1.350745] NET: Registered protocol family 17 [ 1.355197] can: controller area network core (rev 20120528 abi 9) [ 1.361439] NET: Registered protocol family 29 [ 1.365880] can: raw protocol (rev 20120528) [ 1.370143] can: broadcast manager protocol (rev 20120528 t) [ 1.375791] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381679] Key type dns_resolver registered [ 1.386159] ThumbEE CPU extension supported. [ 1.390439] Registering SWP/SWPB emulation handler [ 1.395228] PJ4 iWMMXt v2 coprocessor enabled. [ 1.400837] USB Power: 5000 mV [ 1.404358] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-16 03:18:56 UTC (1402888736) [ 1.414870] ALSA device list: [ 1.417851] No soundcards found. [ 1.421767] ata1: SATA link down (SStatus 0 SControl F300) [ 1.427363] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.972982] i2c 0-004c: Driver lm90 requests probe deferral [ 2.980269] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.985867] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.995664] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.002118] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.012561] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.018189] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.027657] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041838] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051781] hub 1-0:1.0: USB hub found [ 3.055777] hub 1-0:1.0: 1 port detected [ 3.062261] i2c 0-004c: Driver lm90 requests probe deferral [ 3.069785] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.075421] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.085390] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.091903] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.104088] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.113423] i2c 0-004c: Driver lm90 requests probe deferral [ 3.121049] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.121301] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.121497] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.124507] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.124758] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.194046] VDD_5V0_HDMI_CON: disabling [ 3.198009] vdd_cam_1v8_reg: disabling [ 3.202684] vdd_hdmi_5v0: disabling [ 3.206226] usb1_vbus: disabling [ 3.209637] dvdd_ts: disabling [ 3.215762] ALSA device list: [ 3.218926] #0: NVIDIA Tegra Dalmore [ 3.225260] Waiting for root device /dev/mmcblk0p1... [ 3.366813] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.839882] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.852011] i2c 0-004c: Driver lm90 requests probe deferral [ 3.859711] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.865338] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.875274] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.881757] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965522] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973035] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978652] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988592] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995057] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005437] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011061] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021130] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037172] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046493] hub 1-0:1.0: USB hub found [ 3.050527] hub 1-0:1.0: 1 port detected [ 3.056564] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063829] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069376] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079326] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085759] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097450] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105606] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113332] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.119062] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.126129] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.163152] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.163346] VDD_5V0_HDMI_CON: disabling [ 3.163364] vdd_cam_1v8_reg: disabling [ 3.169646] vdd_hdmi_5v0: disabling [ 3.169664] usb1_vbus: disabling [ 3.169682] dvdd_ts: disabling [ 3.189999] ALSA device list: [ 3.193096] #0: NVIDIA Tegra Dalmore [ 3.197396] plagra-hdmi requests probe deferral [ 3.202511] Waiting for root device /dev/mmcblk0p1... [ 3.372269] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.855725] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.867326] i2c 0-004c: Driver lm90 requests probe deferral [ 3.874835] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.880467] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.890248] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.896646] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031624] usbcore: registered new interface driver usb-storage [ 1.042776] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047986] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052928] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065299] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071494] hub 1-0:1.0: USB hub found [ 1.075308] hub 1-0:1.0: 1 port detected [ 1.082981] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088085] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093009] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105307] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111451] hub 2-0:1.0: USB hub found [ 1.115251] hub 2-0:1.0: 1 port detected [ 1.120034] mousedev: PS/2 mouse device common for all mice [ 1.128292] i2c /dev entries driver [ 1.133001] usbcore: registered new interface driver uvcvideo [ 1.138781] USB Video Class driver (1.1.1) [ 1.142905] gspca_main: v2.14.0 registered [ 1.149699] sdhci: Secure Digital Host Controller Interface driver [ 1.155913] sdhci: Copyright(c) Pierre Ossman [ 1.161116] Synopsys Designware Multimedia Card Interface Driver [ 1.168072] usbcore: registered new interface driver usbhid [ 1.173674] usbhid: USB HID core driver [ 1.182448] TCP: cubic registered [ 1.185816] NET: Registered protocol family 17 [ 1.190300] can: controller area network core (rev 20120528 abi 9) [ 1.196561] NET: Registered protocol family 29 [ 1.201035] can: raw protocol (rev 20120528) [ 1.205331] can: broadcast manager protocol (rev 20120528 t) [ 1.211022] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216898] Key type dns_resolver registered [ 1.221347] ThumbEE CPU extension supported. [ 1.225663] Registering SWP/SWPB emulation handler [ 1.231647] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246654] ALSA device list: [ 1.249636] No soundcards found. [ 1.253750] Waiting for root device /dev/mmcblk0p2... [ 60.325421] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.063274] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071497] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081088] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087286] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095444] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100903] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108659] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.121915] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128731] hub 2-0:1.0: USB hub found [ 2.132538] hub 2-0:1.0: 1 port detected [ 2.137243] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.141783] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149345] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157575] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167223] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173419] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181712] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.188964] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193573] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193616] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.209742] +5V_HDMI_CON: disabling [ 2.209747] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209778] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230101] +USB0_VBUS_SW: disabling [ 2.233719] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238493] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238681] ALSA device list: [ 2.238686] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256393] Waiting for root device /dev/mmcblk0p1... [ 2.446944] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909538] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920730] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925329] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.932859] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941056] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950600] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956783] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.053354] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.061576] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.071145] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.077345] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.085516] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.090973] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.098789] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.112058] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.118863] hub 2-0:1.0: USB hub found [ 2.122670] hub 2-0:1.0: 1 port detected [ 2.127364] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.131864] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.139428] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.147655] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.157305] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.163502] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.171672] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.178950] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.179154] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.192122] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.199646] +5V_HDMI_CON: disabling [ 2.199651] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.199679] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.219989] +USB0_VBUS_SW: disabling [ 2.223604] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.228381] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.228569] ALSA device list: [ 2.228573] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.246290] Waiting for root device /dev/mmcblk0p1... [ 2.437086] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.899874] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.910984] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.915574] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.923105] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.931301] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.940810] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.946966] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.072007] can: raw protocol (rev 20120528) [ 47.072013] can: broadcast manager protocol (rev 20120528 t) [ 47.072022] can: netlink gateway (rev 20130117) max_hops=1 [ 47.072318] Key type dns_resolver registered [ 47.072403] omap_vc_init_channel: No PMIC info for vdd_core [ 47.072405] omap_vp_init: No PMIC info for vdd_core [ 47.072409] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072410] omap_vp_init: No PMIC info for vdd_mm [ 47.072414] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072415] omap_vp_init: No PMIC info for vdd_mpu [ 47.072729] ThumbEE CPU extension supported. [ 47.072744] Registering SWP/SWPB emulation handler [ 47.077619] palmas 0-0048: Irq flag is 0x00000000 [ 47.149263] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.150115] mmc0: new high speed MMC card at address 0001 [ 47.150375] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.151716] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.156713] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.157298] mmcblk0: unknown partition table [ 47.158083] mmcblk0boot1: unknown partition table [ 47.158827] mmcblk0boot0: unknown partition table [ 47.194098] smps123: 600 <--> 1500 mV at 1060 mV [ 47.200231] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206654] smps6: 1200 mV [ 47.210620] smps7: 1800 mV [ 47.214727] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220475] smps9: failed to get the current voltage [ 47.225724] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237773] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.366895] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.511907] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.517991] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.525432] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.532291] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.540016] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.553476] ALSA device list: [ 47.556570] No soundcards found. [ 47.560573] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.523139] TCP: cubic registered [ 47.523147] NET: Registered protocol family 17 [ 47.523164] can: controller area network core (rev 20120528 abi 9) [ 47.523212] NET: Registered protocol family 29 [ 47.523219] can: raw protocol (rev 20120528) [ 47.523225] can: broadcast manager protocol (rev 20120528 t) [ 47.523234] can: netlink gateway (rev 20130117) max_hops=1 [ 47.523532] Key type dns_resolver registered [ 47.523609] omap_vc_init_channel: No PMIC info for vdd_core [ 47.523611] omap_vp_init: No PMIC info for vdd_core [ 47.523614] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.523616] omap_vp_init: No PMIC info for vdd_mm [ 47.523620] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.523621] omap_vp_init: No PMIC info for vdd_mpu [ 47.523933] ThumbEE CPU extension supported. [ 47.523948] Registering SWP/SWPB emulation handler [ 47.532513] palmas 0-0048: Irq flag is 0x00000000 [ 47.614831] mmcblk0: unknown partition table [ 47.620185] mmcblk0boot1: unknown partition table [ 47.625965] mmcblk0boot0: unknown partition table [ 47.631137] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638720] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644842] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651269] smps6: 1200 mV [ 47.655243] smps7: 1800 mV [ 47.659366] smps8: 600 <--> 1310 mV at 1040 mV [ 47.665098] smps9: failed to get the current voltage [ 47.670343] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682410] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806800] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814701] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820791] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828238] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835086] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842789] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856220] ALSA device list: [ 47.859325] No soundcards found. [ 47.863321] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.921276] NET: Registered protocol family 17 [ 1.921328] NET: Registered protocol family 15 [ 1.921498] Key type dns_resolver registered [ 1.921598] omap_vc_init_channel: No PMIC info for vdd_core [ 1.921602] omap_vp_init: No PMIC info for vdd_core [ 1.921612] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.921615] omap_vp_init: No PMIC info for vdd_mm [ 1.921624] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.921627] omap_vp_init: No PMIC info for vdd_mpu [ 1.922197] ThumbEE CPU extension supported. [ 1.922222] Registering SWP/SWPB emulation handler [ 1.922234] SmartReflex Class3 initialized [ 1.941007] palmas 0-0048: Irq flag is 0x00000000 [ 2.023919] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.030810] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.039859] mmcblk0: unknown partition table [ 2.046349] mmcblk0boot1: unknown partition table [ 2.053489] mmcblk0boot0: unknown partition table [ 2.058903] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.111204] smps123: 600 <--> 1500 mV at 1060 mV [ 2.118257] smps45: 600 <--> 1310 mV at 1030 mV [ 2.125628] smps6: 1200 mV [ 2.130420] smps7: 1800 mV [ 2.135344] smps8: 600 <--> 1310 mV at 1040 mV [ 2.141838] smps9: failed to get the current voltage [ 2.147782] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.162135] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.170973] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.178700] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.184864] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.194003] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.203397] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.210362] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.218914] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.227581] sr_init: No PMIC hook to init smartreflex [ 2.233044] sr_init: platform driver register failed for SR [ 2.261437] pbias_mmc_omap5: disabling [ 2.266986] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3490 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120655] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127280] hub 3-0:1.0: USB hub found [ 2.131082] hub 3-0:1.0: 1 port detected [ 2.136117] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143150] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-16 03:19:43 UTC (1402888783) [ 2.155711] vdd_1v2: disabling [ 2.158930] vdd_1v5: disabling [ 2.222048] ALSA device list: [ 2.225016] #0: NVIDIA Tegra Seaboard [ 2.229495] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237249] Please append a correct "root=" boot option; here are the available partitions: [ 2.245608] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253860] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-12066-gdd1845a #1 [ 2.261093] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268834] [<c0211c68>] (show_stack) from [<c0811ab8>] (dump_stack+0x88/0x98) [ 2.276047] [<c0811ab8>] (dump_stack) from [<c080e908>] (panic+0xa0/0x218) [ 2.282918] [<c080e908>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.290390] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.298294] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.306287] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.315144] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cc00>] (kernel_init+0x8/0xf0) [ 2.323222] [<c080cc00>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330779] CPU1: stopping [ 2.333483] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-12066-gdd1845a #1 [ 2.340702] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348437] [<c0211c68>] (show_stack) from [<c0811ab8>] (dump_stack+0x88/0x98) [ 2.355648] [<c0811ab8>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.363030] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370586] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.378051] Exception stack(0xea087f68 to 0xea087fb0) [ 2.383092] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 8ae12190 00000000 [ 2.391255] 7f80: 8ae36b80 00000000 eafb6db0 ea086000 00000000 c081f054 00000015 ea087fb0 [ 2.399414] 7fa0: c06b2fec c06b2ff8 60000113 ffffffff [ 2.404462] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.412460] [<c06b2ff8>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.421230] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.428002] drm_kms_helper: panic occurred, switching back to text console [ 2.434884] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0add270 (9045 kB) [ 0.000000] .init : 0xc0ade000 - 0xc0b84100 ( 665 kB) [ 0.000000] .data : 0xc0b86000 - 0xc0c65140 ( 893 kB) [ 0.000000] .bss : 0xc0c65148 - 0xc0cb2088 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.645200] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.645738] Console: colour dummy device 80x30 [ 2889.645749] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.645756] pid_max: default: 32768 minimum: 301 [ 2889.645817] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.645823] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.646090] CPU: Testing write buffer coherency: ok [ 2889.646200] CPU0: update cpu_capacity 1024 [ 2889.646206] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.646296] Setting up static identity map for 0x4081e508 - 0x4081e5a0 [ 2889.647378] CPU1: Booted secondary processor [ 2889.647411] CPU1: update cpu_capacity 1024 [ 2889.647415] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.647459] Brought up 2 CPUs [ 2889.647468] SMP: Total of 2 processors activated. [ 2889.647472] CPU: All CPU(s) started in HYP mode. [ 2889.647476] CPU: Virtualization extensions available. [ 2889.647717] devtmpfs: initialized [ 2889.649599] VFP support v0.3: implementor 41 architecture 4 pa~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.747667] pid_max: default: 32768 minimum: 301 [ 2889.747727] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.747733] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.748001] CPU: Testing write buffer coherency: ok [ 2889.748110] CPU0: update cpu_capacity 1024 [ 2889.748116] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.748213] Setting up static identity map for 0x40817538 - 0x408175d0 [ 2889.749314] CPU1: Booted secondary processor [ 2889.749348] CPU1: update cpu_capacity 1024 [ 2889.749351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.749395] Brought up 2 CPUs [ 2889.749404] SMP: Total of 2 processors activated. [ 2889.749408] CPU: All CPU(s) started in HYP mode. [ 2889.749411] CPU: Virtualization extensions available. [ 2889.749652] devtmpfs: initialized [ 2889.751553] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.751746] pinctrl core: initialized pinctrl subsystem [ 2889.751949] regulator-dummy: no parameters [ 2889.757836] NET: Registered protocol family 16 [ 2889.758720] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.759444] cpuidle: using governor ladder [ 2889.759451] cpuidle: using governor menu [ 2889.764486] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.768316] No ATAGs? [ 2889.768336] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.768341] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.768434] EXYNOS5250 PMU Initialize [ 2889.769639] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594608] vbat-supply: no parameters [ 2920.594746] P5.0V_USB3CON: 5000 mV [ 2920.595900] vgaarb: loaded [ 2920.596181] SCSI subsystem initialized [ 2920.596261] libata version 3.00 loaded. [ 2920.596408] usbcore: registered new interface driver usbfs [ 2920.596437] usbcore: registered new interface driver hub [ 2920.596488] usbcore: registered new device driver usb [ 2920.5969~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.538604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.550537] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.557830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569305] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.577880] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.589813] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597137] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.608612] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616424] HS USB OTG: no transceiver configured [ 3.621154] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.628967] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.636901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.648834] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656158] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.667633] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676208] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688110] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.695434] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.706909] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.714721] HS USB OTG: no transceiver configured [ 3.719421] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727294] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747131] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.754455] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.765930] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.774536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.786437] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.793762] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805236] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813079] HS USB OTG: no transceiver configured [ 3.817779] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.825622] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.833557] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.845489] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.852783] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864288] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.872863] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070233] ohci-platform: OHCI generic platform driver [ 1.075630] ohci-omap3: OHCI OMAP3 driver [ 1.079797] SPEAr-ohci: OHCI SPEAr driver [ 1.084641] usbcore: registered new interface driver usb-storage [ 1.095695] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100775] ci_hdrc ci_hdrc.0: no supported roles [ 1.105607] 2184200.usb supply vbus not found, using dummy regulator [ 1.115708] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120791] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125709] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142839] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.149035] hub 1-0:1.0: USB hub found [ 1.152861] hub 1-0:1.0: 1 port detected [ 1.157568] mousedev: PS/2 mouse device common for all mice [ 1.165713] i2c /dev entries driver [ 1.170403] usbcore: registered new interface driver uvcvideo [ 1.176178] USB Video Class driver (1.1.1) [ 1.180302] gspca_main: v2.14.0 registered [ 1.187028] sdhci: Secure Digital Host Controller Interface driver [ 1.193234] sdhci: Copyright(c) Pierre Ossman [ 1.198458] Synopsys Designware Multimedia Card Interface Driver [ 1.205386] usbcore: registered new interface driver usbhid [ 1.210981] usbhid: USB HID core driver [ 1.219402] TCP: cubic registered [ 1.222737] NET: Registered protocol family 17 [ 1.227224] can: controller area network core (rev 20120528 abi 9) [ 1.233480] NET: Registered protocol family 29 [ 1.237953] can: raw protocol (rev 20120528) [ 1.242235] can: broadcast manager protocol (rev 20120528 t) [ 1.247922] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253828] Key type dns_resolver registered [ 1.258582] ThumbEE CPU extension supported. [ 1.262901] Registering SWP/SWPB emulation handler [ 1.269305] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.284344] ALSA device list: [ 1.287328] No soundcards found. [ 1.291321] Waiting for root device /dev/mmcblk0p2... [ 60.323340] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline boot: 33 boots: 33 pass, 0 fail (v3.15-12066-gdd1845a)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-12066-gdd1845a Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.1 sec: PASS da850-evm 0 min 15.0 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.7 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.5 sec: PASS tegra124-jetson-tk1 0 min 17.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.7 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 11.9 sec: PASS tegra30-beaver 0 min 33.3 sec: PASS omap3-n900 0 min 16.2 sec: PASS qcom-apq8074-dragonboard 0 min 19.9 sec: PASS bcm28155-ap 0 min 25.9 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 55.9 sec: PASS exynos5420-arndale-octa 0 min 41.0 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 39.6 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.1 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.2 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.2 sec: PASS

10 years, 6 months

mainline build: 269 warnings 0 failures (mainline/v3.15-12066-gdd1845a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: dd1845a Merge tag 'clk-for-linus-3.16-part2' of git://git.linaro.org/people/mike.turquette/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-12066-gdd1845a/ Runtime: 45m 43s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

mainline boot: 32 boots: 32 pass, 0 fail (v3.15-12015-gabf04af)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-12015-gabf04af Full Report =========== arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.0 sec: PASS da850-evm 0 min 14.9 sec: PASS arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.1 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.6 sec: PASS sun4i-a10-cubieboard 0 min 12.7 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 52.1 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.5 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS ste-snowball 1 min 14.4 sec: PASS tegra30-beaver 0 min 20.0 sec: PASS omap3-n900 0 min 16.0 sec: PASS qcom-apq8074-dragonboard 0 min 20.0 sec: PASS bcm28155-ap 0 min 26.6 sec: PASS omap3-overo-tobi 0 min 24.9 sec: PASS omap3-overo-storm-tobi 0 min 24.0 sec: PASS omap3-beagle-xm 0 min 45.9 sec: PASS exynos5420-arndale-octa 0 min 40.8 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 37.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.6 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.2 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.8 sec: PASS exynos5250-arndale 1 min 1.5 sec: PASS exynos5410-smdk5410 0 min 27.9 sec: PASS

10 years, 6 months

mainline boot: 23 passed 18 failed (mainline/v3.15-12015-gabf04af)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:31.63 capri bcm_defconfig : FAILED 1:24.33 capri multi_v7_defconfig : FAILED 1:24.97 cubox multi_v7_defconfig : FAILED 1:32.70 dalmore multi_v7_defconfig : FAILED 1:32.87 dalmore multi_lpae_defconfig : FAILED 1:30.46 hummingboard multi_v7_defconfig : FAILED 1:27.47 jetson multi_v7_defconfig : FAILED 1:26.24 jetson multi_lpae_defconfig : FAILED 1:25.70 omap5uevm omap2plus_defconfig : FAILED 1:46.01 omap5uevm multi_v7_defconfig : FAILED 1:47.59 omap5uevm multi_lpae_defconfig : FAILED 1:49.39 sama5 sama5_defconfig : FAILED 3:01.72 seaboard multi_v7_defconfig : FAILED 0:40.72 snow multi_v7_defconfig : FAILED 1:13.12 snow multi_lpae_defconfig : FAILED 1:14.05 snowball u8500_defconfig : FAILED 1:52.00 wandboard multi_v7_defconfig : FAILED 1:34.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.00 arndale exynos_defconfig : passed 1:17.47 arndale multi_v7_defconfig : passed 1:37.15 arndale multi_lpae_defconfig : passed 1:20.74 bbb omap2plus_defconfig : passed 1:33.66 bbb multi_v7_defconfig : passed 1:20.42 beaver tegra_defconfig : passed 1:09.34 cubie sunxi_defconfig : passed 1:28.77 cubie multi_v7_defconfig : passed 1:39.59 cubie2 sunxi_defconfig : passed 1:36.51 cubie2 multi_v7_defconfig : passed 1:29.79 cubie2 multi_lpae_defconfig : passed 1:26.87 dalmore tegra_defconfig : passed 1:27.02 hummingboard imx_v6_v7_defconfig : passed 1:25.72 jetson tegra_defconfig : passed 3:59.72 panda omap2plus_defconfig : warnings 1:27.35 panda multi_v7_defconfig : warnings 1:44.88 seaboard tegra_defconfig : passed 1:06.14 snow exynos_defconfig : passed 1:19.44 snowball multi_v7_defconfig : passed 5:09.98 trimslice tegra_defconfig : passed 4:04.12 trimslice multi_v7_defconfig : passed 3:48.65 wandboard imx_v6_v7_defconfig : passed 1:09.52 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.565684] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.571777] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.576742] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.582835] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.590585] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.597695] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.603290] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.609690] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.619687] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.630061] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.636690] [drm] No driver support for vblank timestamp query. [ 3.642650] host1x drm: No connectors reported connected with modes [ 3.648916] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.672026] Console: switching to colour frame buffer device 128x48 [ 3.683759] host1x drm: fb0: frame buffer device [ 3.688455] host1x drm: registered panic notifier [ 3.703606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.709870] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.717313] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.728808] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.734214] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.742016] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.753214] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.759558] hub 1-0:1.0: USB hub found [ 3.763335] hub 1-0:1.0: 1 port detected [ 3.767710] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.773129] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.780879] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.793594] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.799895] hub 2-0:1.0: USB hub found [ 3.803664] hub 2-0:1.0: 1 port detected [ 3.811609] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.824395] usb1_vbus: disabling [ 3.827798] ALSA device list: [ 3.830798] #0: NVIDIA Tegra Beaver [ 3.835020] Waiting for root device /dev/mmcblk0p1... [ 4.113630] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.582364] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 1200 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225711] hub 2-0:1.0: 1 port detected [ 1.230082] SPEAr-ehci: EHCI SPEAr driver [ 1.234188] tegra-ehci: Tegra EHCI driver [ 1.238316] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244498] ohci-pci: OHCI PCI platform driver [ 1.249004] ohci-platform: OHCI generic platform driver [ 1.254319] ohci-omap3: OHCI OMAP3 driver [ 1.258416] SPEAr-ohci: OHCI SPEAr driver [ 1.263158] usbcore: registered new interface driver usb-storage [ 1.270696] mousedev: PS/2 mouse device common for all mice [ 1.277706] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287049] i2c /dev entries driver [ 1.293343] usbcore: registered new interface driver uvcvideo [ 1.299091] USB Video Class driver (1.1.1) [ 1.303189] gspca_main: v2.14.0 registered [ 1.310493] orion_wdt: Initial timeout 25 sec [ 1.315931] sdhci: Secure Digital Host Controller Interface driver [ 1.322104] sdhci: Copyright(c) Pierre Ossman [ 1.327018] Synopsys Designware Multimedia Card Interface Driver [ 1.333702] usbcore: registered new interface driver usbhid [ 1.339260] usbhid: USB HID core driver [ 1.347266] TCP: cubic registered [ 1.350616] NET: Registered protocol family 17 [ 1.355071] can: controller area network core (rev 20120528 abi 9) [ 1.361301] NET: Registered protocol family 29 [ 1.365737] can: raw protocol (rev 20120528) [ 1.370002] can: broadcast manager protocol (rev 20120528 t) [ 1.375663] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381535] Key type dns_resolver registered [ 1.386014] ThumbEE CPU extension supported. [ 1.390297] Registering SWP/SWPB emulation handler [ 1.395087] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399829] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406249] USB Power: 5000 mV [ 1.409778] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-15 02:29:07 UTC (1402799347) [ 1.420336] ALSA device list: [ 1.423293] No soundcards found. [ 1.427214] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.970262] i2c 0-004c: Driver lm90 requests probe deferral [ 2.977732] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.983340] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.993266] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.999724] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.010025] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.015644] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.025703] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041821] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051215] hub 1-0:1.0: USB hub found [ 3.055227] hub 1-0:1.0: 1 port detected [ 3.061266] i2c 0-004c: Driver lm90 requests probe deferral [ 3.068572] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.074123] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.084056] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.090476] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.102155] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.110349] i2c 0-004c: Driver lm90 requests probe deferral [ 3.118036] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.118159] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.118244] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.121221] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.121589] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.191621] VDD_5V0_HDMI_CON: disabling [ 3.195512] vdd_cam_1v8_reg: disabling [ 3.199725] vdd_hdmi_5v0: disabling [ 3.203433] usb1_vbus: disabling [ 3.206753] dvdd_ts: disabling [ 3.212018] ALSA device list: [ 3.215033] #0: NVIDIA Tegra Dalmore [ 3.221520] Waiting for root device /dev/mmcblk0p1... [ 3.406901] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.890283] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.901802] i2c 0-004c: Driver lm90 requests probe deferral [ 3.909301] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.914934] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.924705] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.931099] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.964507] i2c 0-004c: Driver lm90 requests probe deferral [ 2.971834] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.977424] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.987243] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.993702] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.004294] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.009903] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.020206] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031953] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041246] hub 1-0:1.0: USB hub found [ 3.045331] hub 1-0:1.0: 1 port detected [ 3.051450] i2c 0-004c: Driver lm90 requests probe deferral [ 3.058898] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064513] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074542] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081016] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092522] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100732] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108465] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.108736] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.108829] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.111927] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.112182] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.181335] VDD_5V0_HDMI_CON: disabling [ 3.185310] vdd_cam_1v8_reg: disabling [ 3.189529] vdd_hdmi_5v0: disabling [ 3.193231] usb1_vbus: disabling [ 3.196497] dvdd_ts: disabling [ 3.202583] ALSA device list: [ 3.205592] #0: NVIDIA Tegra Dalmore [ 3.211621] Waiting for root device /dev/mmcblk0p1... [ 3.397333] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.881676] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.893294] i2c 0-004c: Driver lm90 requests probe deferral [ 3.900829] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.906465] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.916255] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.922655] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031585] usbcore: registered new interface driver usb-storage [ 1.042726] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047941] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052886] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065337] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071532] hub 1-0:1.0: USB hub found [ 1.075344] hub 1-0:1.0: 1 port detected [ 1.083029] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.088136] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.093061] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105351] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111503] hub 2-0:1.0: USB hub found [ 1.115305] hub 2-0:1.0: 1 port detected [ 1.120078] mousedev: PS/2 mouse device common for all mice [ 1.128351] i2c /dev entries driver [ 1.133087] usbcore: registered new interface driver uvcvideo [ 1.138869] USB Video Class driver (1.1.1) [ 1.142995] gspca_main: v2.14.0 registered [ 1.149745] sdhci: Secure Digital Host Controller Interface driver [ 1.155957] sdhci: Copyright(c) Pierre Ossman [ 1.161153] Synopsys Designware Multimedia Card Interface Driver [ 1.168109] usbcore: registered new interface driver usbhid [ 1.173712] usbhid: USB HID core driver [ 1.181888] TCP: cubic registered [ 1.185227] NET: Registered protocol family 17 [ 1.189721] can: controller area network core (rev 20120528 abi 9) [ 1.195983] NET: Registered protocol family 29 [ 1.200460] can: raw protocol (rev 20120528) [ 1.204741] can: broadcast manager protocol (rev 20120528 t) [ 1.210433] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216329] Key type dns_resolver registered [ 1.220780] ThumbEE CPU extension supported. [ 1.225080] Registering SWP/SWPB emulation handler [ 1.231081] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246128] ALSA device list: [ 1.249112] No soundcards found. [ 1.253221] Waiting for root device /dev/mmcblk0p2... [ 60.325462] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.063032] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071254] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.080854] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087049] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095203] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100661] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108418] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.121836] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128708] hub 2-0:1.0: USB hub found [ 2.132556] hub 2-0:1.0: 1 port detected [ 2.137412] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.141948] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149514] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157738] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167418] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173616] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181783] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.188930] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193540] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193583] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.209771] +5V_HDMI_CON: disabling [ 2.209777] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209807] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230108] +USB0_VBUS_SW: disabling [ 2.233711] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238498] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238684] ALSA device list: [ 2.238689] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256448] Waiting for root device /dev/mmcblk0p1... [ 2.446871] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909627] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920734] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925321] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.932848] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941045] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950565] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956727] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.053373] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.061596] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.071163] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.077363] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.085554] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.091011] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.098764] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.112101] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.118907] hub 2-0:1.0: USB hub found [ 2.122716] hub 2-0:1.0: 1 port detected [ 2.127422] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.131921] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.139510] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.147740] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.157395] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.163593] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.171999] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.179121] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.183736] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.183788] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.199891] +5V_HDMI_CON: disabling [ 2.199896] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.199923] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.220251] +USB0_VBUS_SW: disabling [ 2.223870] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.228643] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.228830] ALSA device list: [ 2.228834] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.246538] Waiting for root device /dev/mmcblk0p1... [ 2.437127] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.899624] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.910819] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.915417] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.922947] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.931144] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.940648] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.946803] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071493] can: raw protocol (rev 20120528) [ 47.071498] can: broadcast manager protocol (rev 20120528 t) [ 47.071508] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071806] Key type dns_resolver registered [ 47.071890] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071893] omap_vp_init: No PMIC info for vdd_core [ 47.071896] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071898] omap_vp_init: No PMIC info for vdd_mm [ 47.071902] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071904] omap_vp_init: No PMIC info for vdd_mpu [ 47.072213] ThumbEE CPU extension supported. [ 47.072228] Registering SWP/SWPB emulation handler [ 47.077563] palmas 0-0048: Irq flag is 0x00000000 [ 47.148773] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.155517] mmc0: new high speed MMC card at address 0001 [ 47.161415] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.166240] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.172500] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.179362] mmcblk0: unknown partition table [ 47.179369] smps123: 600 <--> 1500 mV at 1060 mV [ 47.189754] mmcblk0boot1: unknown partition table [ 47.195010] smps45: 600 <--> 1310 mV at 1030 mV [ 47.195516] mmcblk0boot0: unknown partition table [ 47.206440] smps6: 1200 mV [ 47.210438] smps7: 1800 mV [ 47.214576] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220318] smps9: failed to get the current voltage [ 47.225571] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237614] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361852] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506860] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512952] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520404] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527278] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.535007] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548494] ALSA device list: [ 47.551589] No soundcards found. [ 47.555596] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.511452] can: raw protocol (rev 20120528) [ 47.511457] can: broadcast manager protocol (rev 20120528 t) [ 47.511466] can: netlink gateway (rev 20130117) max_hops=1 [ 47.511774] Key type dns_resolver registered [ 47.511860] omap_vc_init_channel: No PMIC info for vdd_core [ 47.511864] omap_vp_init: No PMIC info for vdd_core [ 47.511867] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.511869] omap_vp_init: No PMIC info for vdd_mm [ 47.511872] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.511874] omap_vp_init: No PMIC info for vdd_mpu [ 47.512180] ThumbEE CPU extension supported. [ 47.512196] Registering SWP/SWPB emulation handler [ 47.517524] palmas 0-0048: Irq flag is 0x00000000 [ 47.588725] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.595456] mmc0: new high speed MMC card at address 0001 [ 47.601344] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.606159] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.612424] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.619294] mmcblk0: unknown partition table [ 47.619302] smps123: 600 <--> 1500 mV at 1060 mV [ 47.629676] mmcblk0boot1: unknown partition table [ 47.634932] smps45: 600 <--> 1310 mV at 1030 mV [ 47.635446] mmcblk0boot0: unknown partition table [ 47.646356] smps6: 1200 mV [ 47.650354] smps7: 1800 mV [ 47.654483] smps8: 600 <--> 1310 mV at 1040 mV [ 47.660218] smps9: failed to get the current voltage [ 47.665464] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.677515] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.801810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.946819] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.952917] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.960361] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.967217] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.974930] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.988339] ALSA device list: [ 47.991435] No soundcards found. [ 47.995428] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.923509] NET: Registered protocol family 15 [ 1.923697] Key type dns_resolver registered [ 1.923793] omap_vc_init_channel: No PMIC info for vdd_core [ 1.923797] omap_vp_init: No PMIC info for vdd_core [ 1.923806] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.923809] omap_vp_init: No PMIC info for vdd_mm [ 1.923819] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.923821] omap_vp_init: No PMIC info for vdd_mpu [ 1.924370] ThumbEE CPU extension supported. [ 1.924396] Registering SWP/SWPB emulation handler [ 1.924407] SmartReflex Class3 initialized [ 1.953606] palmas 0-0048: Irq flag is 0x00000000 [ 2.031593] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.036855] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.043304] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.052259] mmcblk0: unknown partition table [ 2.059161] mmcblk0boot1: unknown partition table [ 2.065385] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.066064] mmcblk0boot0: unknown partition table [ 2.123714] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130811] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138171] smps6: 1200 mV [ 2.142931] smps7: 1800 mV [ 2.147853] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154221] smps9: failed to get the current voltage [ 2.160180] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174509] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183333] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191082] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197234] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206372] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215758] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222723] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231257] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.239883] sr_init: No PMIC hook to init smartreflex [ 2.245369] sr_init: platform driver register failed for SR [ 2.273628] pbias_mmc_omap5: disabling [ 2.279051] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3259 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.157140] hub 3-0:1.0: USB hub found [ 2.160927] hub 3-0:1.0: 1 port detected [ 2.165769] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.172677] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-15 02:30:15 UTC (1402799415) [ 2.184712] vdd_1v2: disabling [ 2.187941] vdd_1v5: disabling [ 2.191825] ALSA device list: [ 2.194784] #0: NVIDIA Tegra Seaboard [ 2.199188] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.206944] Please append a correct "root=" boot option; here are the available partitions: [ 2.215299] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.223548] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-12015-gabf04af #1 [ 2.230778] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.238514] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.245724] [<c0810f90>] (dump_stack) from [<c080dde0>] (panic+0xa0/0x218) [ 2.252591] [<c080dde0>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.260060] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.267962] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.275951] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.284806] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0d8>] (kernel_init+0x8/0xf0) [ 2.292881] [<c080c0d8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.300439] CPU1: stopping [ 2.303140] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-12015-gabf04af #1 [ 2.310356] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.318087] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.325297] [<c0810f90>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.332678] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.340231] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.347694] Exception stack(0xea087f30 to 0xea087f78) [ 2.352734] 7f20: 00000000 c0bbdf94 c0bbdf94 0000004c [ 2.360893] 7f40: 81774b98 00000000 8914d5a0 00000000 eafb6db0 c0c98428 00000000 ea46cd64 [ 2.369051] 7f60: 00000015 ea087f78 c06b2fec c06b2ff8 60000113 ffffffff [ 2.375656] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.383647] [<c06b2ff8>] (cpuidle_enter_state) from [<c06b4b5c>] (cpuidle_enter_state_coupled+0x130/0x378) [ 2.393289] [<c06b4b5c>] (cpuidle_enter_state_coupled) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.402751] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.409523] drm_kms_helper: panic occurred, switching back to text console [ 2.416400] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.671724] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.672260] Console: colour dummy device 80x30 [ 2889.672271] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.672279] pid_max: default: 32768 minimum: 301 [ 2889.672339] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.672344] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.672614] CPU: Testing write buffer coherency: ok [ 2889.672726] CPU0: update cpu_capacity 1024 [ 2889.672732] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.672827] Setting up static identity map for 0x4081d9a0 - 0x4081da38 [ 2889.673911] CPU1: Booted secondary processor [ 2889.673944] CPU1: update cpu_capacity 1024 [ 2889.673947] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.673991] Brought up 2 CPUs [ 2889.673999] SMP: Total of 2 processors activated. [ 2889.674003] CPU: All CPU(s) started in HYP mode. [ 2889.674007] CPU: Virtualization extensions available. [ 2889.674244] devtmpfs: initialized [ 2889.676112] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.676309] pinctrl core: initialized pinctrl subsystem [ 2889.676508] regulator-dummy: no parameters [ 2889.682461] NET: Registered protocol family 16 [ 2889.683337] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.684042] cpuidle: using governor ladder [ 2889.684049] cpuidle: using governor m~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2889.819536] CPU: All CPU(s) started in HYP mode. [ 2889.819539] CPU: Virtualization extensions available. [ 2889.819781] devtmpfs: initialized [ 2889.821675] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.821878] pinctrl core: initialized pinctrl subsystem [ 2889.822081] regulator-dummy: no parameters [ 2889.827964] NET: Registered protocol family 16 [ 2889.828835] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.829559] cpuidle: using governor ladder [ 2889.829566] cpuidle: using governor menu [ 2889.834622] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.838474] No ATAGs? [ 2889.838493] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.838499] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.838593] EXYNOS5250 PMU Initialize [ 2889.839807] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594607] vbat-supply: no parameters [ 2920.594746] P5.0V_USB3CON: 5000 mV [ 2920.595904] vgaarb: loaded [ 2920.596184] SCSI subsystem initialized [ 2920.596264] libata version 3.00 loaded. [ 2920.596411] usbcore: registered new interface driver usbfs [ 2920.596441] usbcore: registered new interface driver hub [ 2920.596492] usbcore: registered new device driver usb [ 2920.596919] Linux video capture interface: v2.00 [ 2920.596942] pps_core: LinuxPPS API ver. 1 registered [ 2920.596946] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596961] PTP clock support registered [ 2920.596998] EDAC MC: Ver: 3.0.0 [ 2920.597346] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597811] Switched to clocksource arch_sys_counter [ 2920.602083] NET: Registered protocol family 2 [ 2920.602327] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602364] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602438] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602466] TCP: reno registered [ 2920.602473] UDP hash ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627258] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635192] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647094] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654418] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665893] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674407] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686340] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693664] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705139] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712951] HS USB OTG: no transceiver configured [ 3.717651] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725494] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733428] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745361] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752655] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764129] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772644] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784576] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791900] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803375] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811187] HS USB OTG: no transceiver configured [ 3.815887] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823730] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831665] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843566] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850891] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862365] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870910] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882843] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890136] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901611] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909423] HS USB OTG: no transceiver configured [ 3.914154] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.921997] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929901] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941833] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949127] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960601] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070093] ohci-platform: OHCI generic platform driver [ 1.075488] ohci-omap3: OHCI OMAP3 driver [ 1.079653] SPEAr-ohci: OHCI SPEAr driver [ 1.084480] usbcore: registered new interface driver usb-storage [ 1.095500] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100580] ci_hdrc ci_hdrc.0: no supported roles [ 1.105414] 2184200.usb supply vbus not found, using dummy regulator [ 1.115518] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120602] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125520] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142766] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148950] hub 1-0:1.0: USB hub found [ 1.152750] hub 1-0:1.0: 1 port detected [ 1.157495] mousedev: PS/2 mouse device common for all mice [ 1.165645] i2c /dev entries driver [ 1.170340] usbcore: registered new interface driver uvcvideo [ 1.176117] USB Video Class driver (1.1.1) [ 1.180241] gspca_main: v2.14.0 registered [ 1.186927] sdhci: Secure Digital Host Controller Interface driver [ 1.193135] sdhci: Copyright(c) Pierre Ossman [ 1.198336] Synopsys Designware Multimedia Card Interface Driver [ 1.205247] usbcore: registered new interface driver usbhid [ 1.210844] usbhid: USB HID core driver [ 1.218691] TCP: cubic registered [ 1.222029] NET: Registered protocol family 17 [ 1.226519] can: controller area network core (rev 20120528 abi 9) [ 1.232785] NET: Registered protocol family 29 [ 1.237245] can: raw protocol (rev 20120528) [ 1.241543] can: broadcast manager protocol (rev 20120528 t) [ 1.247235] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253123] Key type dns_resolver registered [ 1.257896] ThumbEE CPU extension supported. [ 1.262200] Registering SWP/SWPB emulation handler [ 1.268148] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283196] ALSA device list: [ 1.286179] No soundcards found. [ 1.290161] Waiting for root device /dev/mmcblk0p2... [ 60.323261] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 269 warnings 0 failures (mainline/v3.15-12015-gabf04af)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: abf04af Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-12015-gabf04af/ Runtime: 45m 54s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

mainline boot: 21 passed 18 failed (mainline/v3.15-11959-g4a54e5e)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.29 capri bcm_defconfig : FAILED 1:24.09 capri multi_v7_defconfig : FAILED 1:24.62 cubox multi_v7_defconfig : FAILED 1:38.88 dalmore multi_v7_defconfig : FAILED 1:33.91 dalmore multi_lpae_defconfig : FAILED 1:30.97 hummingboard multi_v7_defconfig : FAILED 1:27.02 jetson multi_v7_defconfig : FAILED 1:28.42 jetson multi_lpae_defconfig : FAILED 1:29.36 omap5uevm omap2plus_defconfig : FAILED 1:44.69 omap5uevm multi_v7_defconfig : FAILED 1:44.74 omap5uevm multi_lpae_defconfig : FAILED 1:42.75 sama5 sama5_defconfig : FAILED 3:00.95 seaboard multi_v7_defconfig : FAILED 0:41.32 snow multi_lpae_defconfig : FAILED 1:13.73 snowball u8500_defconfig : FAILED 2:19.36 snowball multi_v7_defconfig : FAILED 4:03.98 wandboard multi_v7_defconfig : FAILED 1:41.42 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.89 arndale exynos_defconfig : passed 1:16.09 arndale multi_v7_defconfig : passed 1:35.79 arndale multi_lpae_defconfig : passed 1:22.03 bbb omap2plus_defconfig : passed 1:32.02 bbb multi_v7_defconfig : passed 1:18.14 beaver tegra_defconfig : passed 0:59.81 cubie sunxi_defconfig : passed 1:26.21 cubie multi_v7_defconfig : passed 1:26.95 cubie2 sunxi_defconfig : passed 1:31.68 cubie2 multi_v7_defconfig : passed 1:28.74 cubie2 multi_lpae_defconfig : passed 1:13.21 dalmore tegra_defconfig : passed 1:20.70 hummingboard imx_v6_v7_defconfig : passed 1:31.41 panda omap2plus_defconfig : warnings 1:34.57 panda multi_v7_defconfig : warnings 1:44.63 seaboard tegra_defconfig : passed 1:02.41 snow exynos_defconfig : passed 1:21.32 snow multi_v7_defconfig : passed 1:22.19 trimslice multi_v7_defconfig : passed 3:51.82 wandboard imx_v6_v7_defconfig : passed 1:10.21 Offline boards: jetson tegra_defconfig : OFFLINE 1:38.57 trimslice tegra_defconfig : OFFLINE 1:44.45 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.566478] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.572571] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.577536] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.583629] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.591379] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.598504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.604097] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.610479] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.620476] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.630836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.637465] [drm] No driver support for vblank timestamp query. [ 3.643413] host1x drm: No connectors reported connected with modes [ 3.649677] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.673501] Console: switching to colour frame buffer device 128x48 [ 3.685217] host1x drm: fb0: frame buffer device [ 3.689913] host1x drm: registered panic notifier [ 3.708611] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714880] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.722323] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.733801] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.739207] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.747014] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.758217] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.764571] hub 1-0:1.0: USB hub found [ 3.768348] hub 1-0:1.0: 1 port detected [ 3.772714] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.778127] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.785877] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.798599] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.804899] hub 2-0:1.0: USB hub found [ 3.808669] hub 2-0:1.0: 1 port detected [ 3.816637] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.829399] usb1_vbus: disabling [ 3.832802] ALSA device list: [ 3.835799] #0: NVIDIA Tegra Beaver [ 3.840030] Waiting for root device /dev/mmcblk0p1... [ 4.118621] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.587495] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225713] hub 2-0:1.0: 1 port detected [ 1.230084] SPEAr-ehci: EHCI SPEAr driver [ 1.234191] tegra-ehci: Tegra EHCI driver [ 1.238329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244517] ohci-pci: OHCI PCI platform driver [ 1.249024] ohci-platform: OHCI generic platform driver [ 1.254339] ohci-omap3: OHCI OMAP3 driver [ 1.258436] SPEAr-ohci: OHCI SPEAr driver [ 1.263176] usbcore: registered new interface driver usb-storage [ 1.270713] mousedev: PS/2 mouse device common for all mice [ 1.277727] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287077] i2c /dev entries driver [ 1.293236] usbcore: registered new interface driver uvcvideo [ 1.298992] USB Video Class driver (1.1.1) [ 1.303096] gspca_main: v2.14.0 registered [ 1.310402] orion_wdt: Initial timeout 25 sec [ 1.315849] sdhci: Secure Digital Host Controller Interface driver [ 1.322018] sdhci: Copyright(c) Pierre Ossman [ 1.326931] Synopsys Designware Multimedia Card Interface Driver [ 1.333607] usbcore: registered new interface driver usbhid [ 1.339166] usbhid: USB HID core driver [ 1.347278] TCP: cubic registered [ 1.350627] NET: Registered protocol family 17 [ 1.355082] can: controller area network core (rev 20120528 abi 9) [ 1.361320] NET: Registered protocol family 29 [ 1.365764] can: raw protocol (rev 20120528) [ 1.370029] can: broadcast manager protocol (rev 20120528 t) [ 1.375691] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381563] Key type dns_resolver registered [ 1.386042] ThumbEE CPU extension supported. [ 1.390325] Registering SWP/SWPB emulation handler [ 1.395115] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399859] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406303] USB Power: 5000 mV [ 1.409867] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 23:09:06 UTC (1402787346) [ 1.420398] ALSA device list: [ 1.423355] No soundcards found. [ 1.427278] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.968771] i2c 0-004c: Driver lm90 requests probe deferral [ 2.976047] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.981662] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.991420] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.997872] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.008399] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.014007] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.024834] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036512] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.045786] hub 1-0:1.0: USB hub found [ 3.049868] hub 1-0:1.0: 1 port detected [ 3.055973] i2c 0-004c: Driver lm90 requests probe deferral [ 3.063446] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.069061] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.079054] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.085508] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.097027] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.105210] i2c 0-004c: Driver lm90 requests probe deferral [ 3.112962] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.113192] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.113286] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.116288] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.116654] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.186303] VDD_5V0_HDMI_CON: disabling [ 3.190283] vdd_cam_1v8_reg: disabling [ 3.194504] vdd_hdmi_5v0: disabling [ 3.198214] usb1_vbus: disabling [ 3.201523] dvdd_ts: disabling [ 3.206664] ALSA device list: [ 3.209660] #0: NVIDIA Tegra Dalmore [ 3.215690] Waiting for root device /dev/mmcblk0p1... [ 3.401885] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.885275] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.896797] i2c 0-004c: Driver lm90 requests probe deferral [ 3.904320] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.909957] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.919712] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.926106] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.965730] i2c 0-004c: Driver lm90 requests probe deferral [ 2.973183] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978794] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988722] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995197] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005581] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.011200] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.021305] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.037520] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.047345] hub 1-0:1.0: USB hub found [ 3.051341] hub 1-0:1.0: 1 port detected [ 3.057855] i2c 0-004c: Driver lm90 requests probe deferral [ 3.065421] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.071053] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.081053] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.087570] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099615] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107807] i2c 0-004c: Driver lm90 requests probe deferral [ 3.113517] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.152183] VDD_5V0_HDMI_CON: disabling [ 3.156088] vdd_cam_1v8_reg: disabling [ 3.160317] vdd_hdmi_5v0: disabling [ 3.163980] usb1_vbus: disabling [ 3.167285] dvdd_ts: disabling [ 3.174776] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.175449] ALSA device list: [ 3.175465] #0: NVIDIA Tegra Dalmore [ 3.187259] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.190209] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.190454] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.210115] Waiting for root device /dev/mmcblk0p1... [ 3.367608] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.851133] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.862801] i2c 0-004c: Driver lm90 requests probe deferral [ 3.870340] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.875975] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.885823] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.892267] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031425] usbcore: registered new interface driver usb-storage [ 1.042588] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047799] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052743] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065193] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071377] hub 1-0:1.0: USB hub found [ 1.075209] hub 1-0:1.0: 1 port detected [ 1.082871] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087977] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092902] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105202] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111350] hub 2-0:1.0: USB hub found [ 1.115150] hub 2-0:1.0: 1 port detected [ 1.119920] mousedev: PS/2 mouse device common for all mice [ 1.128199] i2c /dev entries driver [ 1.132941] usbcore: registered new interface driver uvcvideo [ 1.138721] USB Video Class driver (1.1.1) [ 1.142849] gspca_main: v2.14.0 registered [ 1.149629] sdhci: Secure Digital Host Controller Interface driver [ 1.155844] sdhci: Copyright(c) Pierre Ossman [ 1.161044] Synopsys Designware Multimedia Card Interface Driver [ 1.167987] usbcore: registered new interface driver usbhid [ 1.173588] usbhid: USB HID core driver [ 1.181777] TCP: cubic registered [ 1.185114] NET: Registered protocol family 17 [ 1.189611] can: controller area network core (rev 20120528 abi 9) [ 1.195873] NET: Registered protocol family 29 [ 1.200346] can: raw protocol (rev 20120528) [ 1.204629] can: broadcast manager protocol (rev 20120528 t) [ 1.210320] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216203] Key type dns_resolver registered [ 1.220649] ThumbEE CPU extension supported. [ 1.224949] Registering SWP/SWPB emulation handler [ 1.230943] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.245903] ALSA device list: [ 1.248888] No soundcards found. [ 1.252953] Waiting for root device /dev/mmcblk0p2... [ 60.325312] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.057925] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.066118] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.075659] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.081813] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.089948] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.095407] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.103230] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.116850] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.123639] hub 2-0:1.0: USB hub found [ 2.127452] hub 2-0:1.0: 1 port detected [ 2.132213] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.136756] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.144314] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.152538] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.162179] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.168377] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.176792] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.183917] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.188526] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.188580] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.204758] +5V_HDMI_CON: disabling [ 2.204764] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.204793] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.225094] +USB0_VBUS_SW: disabling [ 2.228709] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.233487] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.233669] ALSA device list: [ 2.233674] #0: NVIDIA Tegra Jetson TK1 [ 2.2 Driver tegra-hdmi requests probe deferral [ 2.251465] Waiting for root device /dev/mmcblk0p1... [ 2.441901] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.904693] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.915796] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.920386] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.927915] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.936112] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.945631] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.951784] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.063348] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071572] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081118] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087317] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095477] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.100933] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108668] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.122094] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128960] hub 2-0:1.0: USB hub found [ 2.132804] hub 2-0:1.0: 1 port detected [ 2.137530] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.142075] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149632] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157857] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167480] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173679] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.181904] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.189154] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.193757] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.193767] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:21 UTC (949363221) [ 2.209900] +5V_HDMI_CON: disabling [ 2.209905] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.209935] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230257] +USB0_VBUS_SW: disabling [ 2.233873] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.238650] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.238837] ALSA device list: [ 2.238841] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.256543] Waiting for root device /dev/mmcblk0p1... [ 2.447142] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909910] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.921108] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925708] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.933236] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941434] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950935] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.957090] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071527] can: raw protocol (rev 20120528) [ 47.071532] can: broadcast manager protocol (rev 20120528 t) [ 47.071542] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071843] Key type dns_resolver registered [ 47.071925] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071928] omap_vp_init: No PMIC info for vdd_core [ 47.071931] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071933] omap_vp_init: No PMIC info for vdd_mm [ 47.071936] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071938] omap_vp_init: No PMIC info for vdd_mpu [ 47.072247] ThumbEE CPU extension supported. [ 47.072262] Registering SWP/SWPB emulation handler [ 47.077579] palmas 0-0048: Irq flag is 0x00000000 [ 47.148820] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.155562] mmc0: new high speed MMC card at address 0001 [ 47.161463] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.166291] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.172557] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.179425] smps123: 600 <--> 1500 mV at 1060 mV [ 47.179428] mmcblk0: unknown partition table [ 47.187001] mmcblk0boot1: unknown partition table [ 47.187744] mmcblk0boot0: unknown partition table [ 47.200081] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206502] smps6: 1200 mV [ 47.210469] smps7: 1800 mV [ 47.214607] smps8: 600 <--> 1310 mV at 1040 mV [ 47.220341] smps9: failed to get the current voltage [ 47.225591] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237626] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361869] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506880] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512968] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520419] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527281] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.534986] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548441] ALSA device list: [ 47.551539] No soundcards found. [ 47.555537] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.511467] can: raw protocol (rev 20120528) [ 47.511472] can: broadcast manager protocol (rev 20120528 t) [ 47.511481] can: netlink gateway (rev 20130117) max_hops=1 [ 47.511788] Key type dns_resolver registered [ 47.511876] omap_vc_init_channel: No PMIC info for vdd_core [ 47.511879] omap_vp_init: No PMIC info for vdd_core [ 47.511883] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.511885] omap_vp_init: No PMIC info for vdd_mm [ 47.511888] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.511890] omap_vp_init: No PMIC info for vdd_mpu [ 47.512199] ThumbEE CPU extension supported. [ 47.512215] Registering SWP/SWPB emulation handler [ 47.517554] palmas 0-0048: Irq flag is 0x00000000 [ 47.588732] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.595481] mmc0: new high speed MMC card at address 0001 [ 47.601375] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.606188] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.612449] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.619309] mmcblk0: unknown partition table [ 47.623894] smps123: 600 <--> 1500 mV at 1060 mV [ 47.629165] mmcblk0boot1: unknown partition table [ 47.634959] mmcblk0boot0: unknown partition table [ 47.639989] smps45: 600 <--> 1310 mV at 1030 mV [ 47.646472] smps6: 1200 mV [ 47.650469] smps7: 1800 mV [ 47.654618] smps8: 600 <--> 1310 mV at 1040 mV [ 47.660344] smps9: failed to get the current voltage [ 47.665591] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.677650] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806827] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.951835] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.957933] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.965369] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.972222] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.979940] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.993348] ALSA device list: [ 47.996437] No soundcards found. [ 48.000437] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.923552] NET: Registered protocol family 15 [ 1.923726] Key type dns_resolver registered [ 1.923824] omap_vc_init_channel: No PMIC info for vdd_core [ 1.923827] omap_vp_init: No PMIC info for vdd_core [ 1.923837] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.923840] omap_vp_init: No PMIC info for vdd_mm [ 1.923849] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.923852] omap_vp_init: No PMIC info for vdd_mpu [ 1.924402] ThumbEE CPU extension supported. [ 1.924426] Registering SWP/SWPB emulation handler [ 1.924438] SmartReflex Class3 initialized [ 1.953631] palmas 0-0048: Irq flag is 0x00000000 [ 2.031845] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.036947] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.043451] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.052407] mmcblk0: unknown partition table [ 2.059395] mmcblk0boot1: unknown partition table [ 2.066093] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.066250] mmcblk0boot0: unknown partition table [ 2.123782] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130855] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138171] smps6: 1200 mV [ 2.142923] smps7: 1800 mV [ 2.147821] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154223] smps9: failed to get the current voltage [ 2.160178] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174555] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183392] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191138] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197285] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206391] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215756] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222709] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231187] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.239825] sr_init: No PMIC hook to init smartreflex [ 2.245364] sr_init: platform driver register failed for SR [ 2.273560] pbias_mmc_omap5: disabling [ 2.279091] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3072 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.145598] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.152130] hub 3-0:1.0: USB hub found [ 2.155923] hub 3-0:1.0: 1 port detected [ 2.160766] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.167680] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 23:10:02 UTC (1402787402) [ 2.179688] vdd_1v2: disabling [ 2.182922] vdd_1v5: disabling [ 2.186804] ALSA device list: [ 2.189762] #0: NVIDIA Tegra Seaboard [ 2.194171] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.201929] Please append a correct "root=" boot option; here are the available partitions: [ 2.210285] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.218534] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-11959-g4a54e5e #1 [ 2.225763] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.233500] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.240709] [<c0810f90>] (dump_stack) from [<c080dde0>] (panic+0xa0/0x218) [ 2.247576] [<c080dde0>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.255045] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.262947] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.270936] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.279790] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0d8>] (kernel_init+0x8/0xf0) [ 2.287865] [<c080c0d8>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.295418] CPU1: stopping [ 2.298119] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-11959-g4a54e5e #1 [ 2.305336] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.313067] [<c0211c68>] (show_stack) from [<c0810f90>] (dump_stack+0x88/0x98) [ 2.320276] [<c0810f90>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.327658] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.335212] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.342676] Exception stack(0xea087f68 to 0xea087fb0) [ 2.347716] 7f60: 00000000 c0bbdf94 c0bbdf94 0000004c 887ebfc0 00000000 [ 2.355877] 7f80: 88c8a5b8 00000000 eafb6db0 ea086000 00000000 c081e054 00000015 ea087fb0 [ 2.364034] 7fa0: c06b2fec c06b2ff8 60000113 ffffffff [ 2.369081] [<c02127c0>] (__irq_svc) from [<c06b2ff8>] (cpuidle_enter_state+0x68/0x100) [ 2.377078] [<c06b2ff8>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.385847] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.392618] drm_kms_helper: panic occurred, switching back to text console [ 2.399497] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] HighMem zone: 2568 pages used for memmap [ 0.000000] HighMem zone: 328704 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @ea79a000 s8448 r8192 d16128 u32768 [ 0.000000] pcpu-alloc: s8448 r8192 d16128 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6459K kernel code, 891K rwdata, 2576K rodata, 664K init, 307K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.567426] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.567965] Console: colour dummy device 80x30 [ 2889.567976] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.567983] pid_max: default: 32768 minimum: 301 [ 2889.568044] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.568049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.5~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-multi_v7_defconfig failure log: ------------------------------------------------- [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...[ 57.850067] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 58.135925] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf0060000, IRQ: 300 Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 5 bad IP checksums seen in 5 packets DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 1 No DHCPOFFERS received. Trying recorded lease 172.16.1.108 PING 172.16.1.1 (172.16.1.1) 56(84) bytes of data. --- 172.16.1.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.702/0.702/0.702/0.000 ms bound: renewal in 1455 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.627288] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635223] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.647125] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654449] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665954] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674468] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686401] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693695] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705200] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.713012] HS USB OTG: no transceiver configured [ 3.717712] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725555] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733459] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745391] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752716] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764190] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772705] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784637] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791931] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803436] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811218] HS USB OTG: no transceiver configured [ 3.815948] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823791] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831695] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843627] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850952] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862426] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870971] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.882873] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.890167] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.901672] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.909454] HS USB OTG: no transceiver configured [ 3.914184] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.922027] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.929931] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.941864] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.949157] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.960662] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070040] ohci-platform: OHCI generic platform driver [ 1.075427] ohci-omap3: OHCI OMAP3 driver [ 1.079589] SPEAr-ohci: OHCI SPEAr driver [ 1.084422] usbcore: registered new interface driver usb-storage [ 1.095434] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100512] ci_hdrc ci_hdrc.0: no supported roles [ 1.105345] 2184200.usb supply vbus not found, using dummy regulator [ 1.115443] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120526] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125445] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142710] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148888] hub 1-0:1.0: USB hub found [ 1.152696] hub 1-0:1.0: 1 port detected [ 1.157432] mousedev: PS/2 mouse device common for all mice [ 1.165608] i2c /dev entries driver [ 1.170301] usbcore: registered new interface driver uvcvideo [ 1.176079] USB Video Class driver (1.1.1) [ 1.180203] gspca_main: v2.14.0 registered [ 1.186879] sdhci: Secure Digital Host Controller Interface driver [ 1.193085] sdhci: Copyright(c) Pierre Ossman [ 1.198288] Synopsys Designware Multimedia Card Interface Driver [ 1.205195] usbcore: registered new interface driver usbhid [ 1.210793] usbhid: USB HID core driver [ 1.218632] TCP: cubic registered [ 1.221973] NET: Registered protocol family 17 [ 1.226463] can: controller area network core (rev 20120528 abi 9) [ 1.232726] NET: Registered protocol family 29 [ 1.237185] can: raw protocol (rev 20120528) [ 1.241482] can: broadcast manager protocol (rev 20120528 t) [ 1.247171] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253047] Key type dns_resolver registered [ 1.257820] ThumbEE CPU extension supported. [ 1.262123] Registering SWP/SWPB emulation handler [ 1.268065] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283049] ALSA device list: [ 1.286033] No soundcards found. [ 1.290005] Waiting for root device /dev/mmcblk0p2... [ 60.323196] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

← Newer
1
...
14
15
16
17
18
19
20
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014