Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline build: 269 warnings 0 failures (mainline/v3.15-11959-g4a54e5e)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 4a54e5e Merge tag 'hsi-for-3.16-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-11959-g4a54e5e/ Runtime: 45m 53s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 3 kernel/sched/core.c:2575:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2547:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2549:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

arm-soc boot: 28 boots: 28 pass, 0 fail (v3.15-8902-g213d819)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-8902-g213d819 Full Report =========== arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.5 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 29.1 sec: PASS am335x-bone 0 min 23.7 sec: PASS tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.6 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 14.2 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.3 sec: PASS ste-snowball 1 min 11.4 sec: PASS tegra30-beaver 0 min 19.6 sec: PASS omap3-n900 0 min 15.3 sec: PASS qcom-apq8074-dragonboard 0 min 19.9 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap3-beagle-xm 0 min 52.7 sec: PASS exynos5420-arndale-octa 1 min 12.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 41.9 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.8 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 31.3 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.7 sec: PASS sun4i-a10-cubieboard 0 min 16.3 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.7 sec: PASS (Warnings: 1)

10 years, 6 months

arm-soc boot: 34 passed 7 failed (arm-soc/v3.15-8902-g213d819)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.15 cubie2 multi_v7_defconfig : FAILED 1:37.10 cubie2 multi_lpae_defconfig : FAILED 1:21.79 omap5uevm omap2plus_defconfig : FAILED 1:45.92 omap5uevm multi_v7_defconfig : FAILED 1:51.72 omap5uevm multi_lpae_defconfig : FAILED 1:50.96 snowball u8500_defconfig : FAILED 1:53.07 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:15.24 arndale exynos_defconfig : passed 1:16.64 arndale multi_v7_defconfig : passed 1:40.74 arndale multi_lpae_defconfig : passed 1:26.63 bbb omap2plus_defconfig : passed 1:33.51 bbb multi_v7_defconfig : passed 1:25.14 beaver tegra_defconfig : passed 0:58.46 beaver multi_v7_defconfig : passed 1:02.67 capri bcm_defconfig : passed 0:39.89 capri multi_v7_defconfig : passed 0:41.05 cubie sunxi_defconfig : passed 1:20.13 cubie multi_v7_defconfig : passed 1:33.44 cubox multi_v7_defconfig : passed 1:14.96 dalmore tegra_defconfig : passed 1:27.09 dalmore multi_v7_defconfig : passed 1:28.09 dalmore multi_lpae_defconfig : passed 1:20.88 hummingboard imx_v6_v7_defconfig : passed 1:14.69 hummingboard multi_v7_defconfig : passed 1:14.49 jetson tegra_defconfig : passed 1:02.95 jetson multi_v7_defconfig : passed 0:56.55 jetson multi_lpae_defconfig : passed 1:00.07 panda omap2plus_defconfig : warnings 1:31.72 panda multi_v7_defconfig : warnings 1:50.13 sama5 sama5_defconfig : warnings 1:55.10 seaboard tegra_defconfig : passed 1:05.00 seaboard multi_v7_defconfig : passed 1:15.99 snow exynos_defconfig : passed 1:29.53 snow multi_v7_defconfig : passed 1:23.75 snow multi_lpae_defconfig : passed 1:22.71 snowball multi_v7_defconfig : passed 3:35.33 trimslice tegra_defconfig : passed 1:02.97 trimslice multi_v7_defconfig : passed 1:21.09 wandboard imx_v6_v7_defconfig : passed 1:09.50 wandboard multi_v7_defconfig : passed 1:19.07 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.329044] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.338011] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.347550] scsi0 : ahci_platform [ 1.351267] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.360007] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.365655] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.373720] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.379931] mmc0: new high speed SDHC card at address aaaa [ 1.385810] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.392096] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.397638] hub 1-0:1.0: USB hub found [ 1.401876] hub 1-0:1.0: 1 port detected [ 1.405976] mmcblk0: p1 [ 1.410262] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.415955] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.423934] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.435316] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.442285] hub 2-0:1.0: USB hub found [ 1.446137] hub 2-0:1.0: 1 port detected [ 1.451156] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.457860] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.465702] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.530164] hub 3-0:1.0: USB hub found [ 1.534017] hub 3-0:1.0: 1 port detected [ 1.539012] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.545731] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.553591] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.615132] hub 4-0:1.0: USB hub found [ 1.618975] hub 4-0:1.0: 1 port detected [ 1.623638] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.711196] No MAC Management Counters available [ 1.715970] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.722597] IP-Config: Failed to open eth0 [ 1.726722] IP-Config: No network devices available [ 1.731639] vcc3v0: disabling [ 1.734717] ALSA device list: [ 1.737697] No soundcards found. [ 1.741834] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.324377] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.333344] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.342903] scsi0 : ahci_platform [ 1.346612] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.355358] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.361011] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.369065] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.375269] mmc0: new high speed SDHC card at address aaaa [ 1.381144] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.387416] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.392967] hub 1-0:1.0: USB hub found [ 1.397201] hub 1-0:1.0: 1 port detected [ 1.401297] mmcblk0: p1 [ 1.405601] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.411285] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.419267] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.430651] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.437666] hub 2-0:1.0: USB hub found [ 1.441505] hub 2-0:1.0: 1 port detected [ 1.446507] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.453195] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.461033] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.525523] hub 3-0:1.0: USB hub found [ 1.529366] hub 3-0:1.0: 1 port detected [ 1.534381] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.541106] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.548948] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.610489] hub 4-0:1.0: USB hub found [ 1.614333] hub 4-0:1.0: 1 port detected [ 1.618999] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.706521] No MAC Management Counters available [ 1.711291] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.717910] IP-Config: Failed to open eth0 [ 1.722033] IP-Config: No network devices available [ 1.726953] vcc3v0: disabling [ 1.730036] ALSA device list: [ 1.733015] No soundcards found. [ 1.737157] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.993990] mmc0: new high speed SDHC card at address aaaa [ 0.999918] mmcblk0: mmc0:aaaa SU16G 14.8 GiB [ 1.005926] mmcblk0: p1 [ 1.016186] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.023669] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.029582] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.038552] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.047445] scsi0 : ahci_platform [ 1.051089] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.059361] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.064959] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.072828] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.096112] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.103073] hub 1-0:1.0: USB hub found [ 1.106910] hub 1-0:1.0: 1 port detected [ 1.111380] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.117017] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.124853] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.146105] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.152997] hub 2-0:1.0: USB hub found [ 1.156824] hub 2-0:1.0: 1 port detected [ 1.161272] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.167946] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.175786] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.240920] hub 3-0:1.0: USB hub found [ 1.244716] hub 3-0:1.0: 1 port detected [ 1.249233] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.255866] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.263742] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.330940] hub 4-0:1.0: USB hub found [ 1.334727] hub 4-0:1.0: 1 port detected [ 1.339086] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.426133] ata1: SATA link down (SStatus 0 SControl 300) [ 1.442422] No MAC Management Counters available [ 1.447185] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.453785] IP-Config: Failed to open eth0 [ 1.457912] IP-Config: No network devices available [ 1.462809] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.092546] NET: Registered protocol family 17 [ 47.092572] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.102160] mmcblk0: unknown partition table [ 47.102936] mmcblk0boot1: unknown partition table [ 47.103699] mmcblk0boot0: unknown partition table [ 47.117938] can: controller area network core (rev 20120528 abi 9) [ 47.124430] NET: Registered protocol family 29 [ 47.129077] can: raw protocol (rev 20120528) [ 47.133542] can: broadcast manager protocol (rev 20120528 t) [ 47.139465] can: netlink gateway (rev 20130117) max_hops=1 [ 47.145469] Key type dns_resolver registered [ 47.149996] omap_vc_init_channel: No PMIC info for vdd_core [ 47.155822] omap_vp_init: No PMIC info for vdd_core [ 47.160914] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.166556] omap_vp_init: No PMIC info for vdd_mm [ 47.171463] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.177201] omap_vp_init: No PMIC info for vdd_mpu [ 47.182491] ThumbEE CPU extension supported. [ 47.186962] Registering SWP/SWPB emulation handler [ 47.193153] palmas 0-0048: Irq flag is 0x00000000 [ 47.200826] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.208412] smps123: 600 <--> 1500 mV at 1060 mV [ 47.214514] smps45: 600 <--> 1310 mV at 1030 mV [ 47.220972] smps6: 1200 mV [ 47.224970] smps7: 1800 mV [ 47.229101] smps8: 600 <--> 1310 mV at 1040 mV [ 47.234823] smps9: failed to get the current voltage [ 47.240072] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.252120] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.376798] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.521807] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.527880] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.535320] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.542187] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.549903] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.563344] ALSA device list: [ 47.566440] No soundcards found. [ 47.570443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.516631] can: raw protocol (rev 20120528) [ 47.516638] can: broadcast manager protocol (rev 20120528 t) [ 47.516650] can: netlink gateway (rev 20130117) max_hops=1 [ 47.516957] Key type dns_resolver registered [ 47.517037] omap_vc_init_channel: No PMIC info for vdd_core [ 47.517039] omap_vp_init: No PMIC info for vdd_core [ 47.517043] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.517045] omap_vp_init: No PMIC info for vdd_mm [ 47.517048] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.517050] omap_vp_init: No PMIC info for vdd_mpu [ 47.517365] ThumbEE CPU extension supported. [ 47.517378] Registering SWP/SWPB emulation handler [ 47.522540] palmas 0-0048: Irq flag is 0x00000000 [ 47.600283] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.606956] mmc0: new high speed MMC card at address 0001 [ 47.612885] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.617698] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.623976] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.630619] smps123: 600 <--> 1500 mV at 1060 mV [ 47.635568] mmcblk0: unknown partition table [ 47.641058] mmcblk0boot1: unknown partition table [ 47.646305] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651564] mmcblk0boot0: unknown partition table [ 47.657769] smps6: 1200 mV [ 47.661798] smps7: 1800 mV [ 47.665906] smps8: 600 <--> 1310 mV at 1040 mV [ 47.671654] smps9: failed to get the current voltage [ 47.676903] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.688956] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.816815] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.961826] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.967914] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.975365] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.982216] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.989932] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.003365] ALSA device list: [ 48.006465] No soundcards found. [ 48.010470] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.003038] NET: Registered protocol family 15 [ 2.003214] Key type dns_resolver registered [ 2.003310] omap_vc_init_channel: No PMIC info for vdd_core [ 2.003313] omap_vp_init: No PMIC info for vdd_core [ 2.003323] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.003326] omap_vp_init: No PMIC info for vdd_mm [ 2.003336] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.003339] omap_vp_init: No PMIC info for vdd_mpu [ 2.003897] ThumbEE CPU extension supported. [ 2.003918] Registering SWP/SWPB emulation handler [ 2.003927] SmartReflex Class3 initialized [ 2.021002] palmas 0-0048: Irq flag is 0x00000000 [ 2.111532] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.116616] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.123065] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.132145] mmcblk0: unknown partition table [ 2.138766] mmcblk0boot1: unknown partition table [ 2.145045] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.145685] mmcblk0boot0: unknown partition table [ 2.203307] smps123: 600 <--> 1500 mV at 1060 mV [ 2.210323] smps45: 600 <--> 1310 mV at 1030 mV [ 2.217639] smps6: 1200 mV [ 2.222422] smps7: 1800 mV [ 2.227373] smps8: 600 <--> 1310 mV at 1040 mV [ 2.233866] smps9: failed to get the current voltage [ 2.239867] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.254213] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.263057] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.270766] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.276913] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.286025] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.295382] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.302332] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.310806] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.319442] sr_init: No PMIC hook to init smartreflex [ 2.324974] sr_init: platform driver register failed for SR [ 2.353101] pbias_mmc_omap5: disabling [ 2.358631] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637359] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645294] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657196] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664520] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675994] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684509] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696441] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703735] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715240] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723052] HS USB OTG: no transceiver configured [ 3.727752] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735595] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755432] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762756] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774230] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782775] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821319] HS USB OTG: no transceiver configured [ 3.826019] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833862] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861022] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872497] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881042] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892944] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900268] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911743] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919555] HS USB OTG: no transceiver configured [ 3.924255] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932128] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940032] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951934] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959259] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970733] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

10 years, 6 months

arm-soc build: 41 warnings 0 failures (arm-soc/v3.15-8902-g213d819)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 213d819 ARM: omap: rework platform selection Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v3.15-8902-g213d819/ Runtime: 46m 18s Passed: 126 Failed: 0 Warnings: 41 Section mismatches: 16 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 kernel/trace/trace_sched_wakeup.c:414:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:119: warning: unsupported argument to '__builtin_return_address' [enabled by default] 1 kernel/trace/trace_sched_wakeup.c:533:73: warning: unsupported argument to '__builtin_return_address' [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 kernel/sched/core.c:2548:76: warning: unsupported argument to '__builtin_return_address' [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 8 kernel/sched/core.c:2520:50: warning: unsupported argument to '__builtin_return_address' [enabled by default] 8 kernel/sched/core.c:2522:51: warning: unsupported argument to '__builtin_return_address' [enabled by default] Section mismatches: 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25654): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd98): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85e18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd18): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85858): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d6b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

next boot: 64 boots: 62 pass, 2 fail (next-20140613)

by Kevin's boot bot

Tree/Branch: next Git describe: next-20140613 Failed boot tests (console logs at the end) =========================================== exynos5420-arndale-octa: FAIL: arm-exynos_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.3 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.7 sec: PASS tegra30-beaver 0 min 17.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 38.8 sec: PASS (Warnings: 1) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 20.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.4 sec: PASS am335x-boneblack 0 min 22.4 sec: PASS omap3-beagle-xm 0 min 50.5 sec: PASS legacy,3530beagle 0 min 29.2 sec: PASS (Warnings: 1) omap4-panda 0 min 54.2 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.1 sec: PASS am335x-bone 0 min 23.9 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 0 min 57.3 sec: PASS (Warnings: 1) omap3-n900 0 min 17.2 sec: PASS legacy,n900 0 min 16.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 54.5 sec: PASS (Warnings: 1) legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.1 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.0 sec: PASS am335x-boneblack 0 min 21.9 sec: PASS sun7i-a20-cubieboard2 0 min 12.9 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 33.5 sec: PASS tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 51.8 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 14.9 sec: PASS ste-snowball 1 min 14.3 sec: PASS tegra30-beaver 0 min 17.3 sec: PASS omap3-n900 0 min 16.4 sec: PASS qcom-apq8074-dragonboard 0 min 19.1 sec: PASS bcm28155-ap 0 min 26.9 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 24.4 sec: PASS omap3-beagle-xm 0 min 47.0 sec: PASS exynos5420-arndale-octa 0 min 41.2 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.1 sec: PASS omap5-uevm 1 min 39.8 sec: PASS (Warnings: 1) omap4-panda-es 0 min 53.9 sec: PASS (Warnings: 1) exynos5250-arndale 0 min 35.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.4 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-qcom_defconfig ------------------ qcom-apq8074-dragonboard 0 min 18.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.4 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 38.8 sec: FAIL exynos5250-arndale 0 min 31.8 sec: PASS exynos5410-smdk5410 0 min 27.0 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.5 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 13.8 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.3 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.5 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.6 sec: PASS armada-370-mirabox 0 min 20.0 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.5 sec: PASS (Warnings: 1) Console logs for failures ========================= arm-exynos_defconfig -------------------- exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- [ 16.252114] mmcblk0: p1 p2 p3 p4 [ 16.255282] Unhandled fault: external abort on non-linefetch (0x008) at 0xf00b8088 [ 16.262820] Internal error: : 8 [#2] PREEMPT SMP ARM [ 16.267756] Modules linked in: [ 16.270793] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 3.15.0-next-20140613 #1 [ 16.279292] Workqueue: kmmcd mmc_rescan [ 16.283095] task: ef014000 ti: ef0b4000 task.ti: ef0b4000 [ 16.288474] PC is at rescan_partitions+0xb4/0x290 [ 16.293147] LR is at 0xf00b8000 [ 16.296268] pc : [<c01b01c0>] lr : [<f00b8000>] psr: 20000113 [ 16.296268] sp : ef0b5c80 ip : 00000000 fp : 00000000 [ 16.307704] r10: 00000000 r9 : ed681040 r8 : ed667200 [ 16.312903] r7 : 00000000 r6 : eec24280 r5 : 00000000 r4 : 00000008 [ 16.319402] r3 : 00000013 r2 : 00000000 r1 : 00000000 r0 : 00000001 [ 16.325903] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 16.333181] Control: 10c5387d Table: 2000406a DAC: 00000015 [ 16.338900] Process kworker/u16:0 (pid: 6, stack limit = 0xef0b4240) [ 16.345226] Stack: (0xef0b5c80 to 0xef0b6000) [ 16.349561] 5c80: c0548484 00000001 ef0b4000 c0389290 00000001 c05245b8 ed60f598 c0524488 [ 16.357706] 5ca0: eec24380 ed60f468 eec24330 eec24280 00000000 ed60f468 00000000 00000000 [ 16.365852] 5cc0: 00000000 eec24280 ed667200 eec24290 00000001 00000000 00000000 c00e3e24 [ 16.373997] 5ce0: c00e2824 00000000 00000000 00000001 eec24280 00000000 ed667270 ed66720c [ 16.382142] 5d00: 00000000 ed60f380 00000003 c00e4088 c0526794 00000001 00000003 c038a710 [ 16.390288] 5d20: c0526794 c00e2d9c ef0b5d34 c02228b4 ed667240 00000001 eec24280 ed667200 [ 16.398433] 5d40: ed667270 ed66720c 00000000 ed60f380 00000003 c01ae0d8 c01acf2c ed667200 [ 16.406579] 5d60: 00000080 0b300000 00000002 ef344c00 ef343400 ef340400 ef340400 ef3406bc [ 16.414725] 5d80: c02bbd24 ef343400 ef340400 ef343588 ef0b5dd6 c02bcc28 00000056 ef34346c [ 16.422870] 5da0: 00000003 ef344c00 ef343400 c02bd858 00000003 ef0b5dd6 00000008 ed5a3708 [ 16.431015] 5dc0: c0467338 ef340698 00000000 34362e33 42694720 32310000 694b2038 c0000042 [ 16.439161] 5de0: 00000001 ef343408 c058a11c 00000000 c054840c 00000001 00000000 c05480b8 [ 16.447307] 5e00: ef013c00 c02b21a8 c02b2190 c0226358 00000000 ef343408 c0226508 ef342808 [ 16.455452] 5e20: 00000000 c0224b34 ef275698 ed7323c4 ef343408 ef34343c c0547fd8 c0226234 [ 16.463598] 5e40: ef343408 ef343408 c0547fd8 c02259a4 ef343408 00000000 ef343410 c022400c [ 16.471743] 5e60: ef013c00 c0383204 c0479d58 ef0b5e84 00061a80 ef343400 ef343408 c0479d04 [ 16.479888] 5e80: 00061a80 c03b3754 00000000 c02b25c8 c0479d04 c0451b3c c0479cc0 00000001 [ 16.488034] 5ea0: ef342800 00000000 ef342800 c02b5014 00061a80 40ff8080 00000000 ef3429ec [ ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Unhandled fault # PYBOOT: Time: 38.76 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.503662] musb-hdrc musb-hdrc.20.auto: musb_init_controller failed with status -517 [ 3.511505] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.519409] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.531341] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.538635] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.550140] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.558654] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.570587] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.577911] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.589385] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.597198] HS USB OTG: no transceiver configured [ 3.601928] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.609771] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.617675] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.629608] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.636932] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.648406] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.656921] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.668853] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.676177] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.687652] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.695465] HS USB OTG: no transceiver configured [ 3.700164] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.708038] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.715942] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.727874] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.735198] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.746673] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.755218] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.767120] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.774444] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.785919] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.793762] HS USB OTG: no transceiver configured [ 3.798461] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.806304] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.814239] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.34 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

queue boot: 23 passed 5 failed (queue/v3.12.22)

by Olof's autobooter

Failed boards: bbb omap2plus_defconfig : FAILED 1:36.13 bbb multi_v7_defconfig : FAILED 1:31.03 omap5uevm omap2plus_defconfig : FAILED 1:18.69 omap5uevm multi_v7_defconfig : FAILED 1:15.99 omap5uevm multi_lpae_defconfig : FAILED 1:15.92 Successful boards: arndale exynos_defconfig : passed 1:20.49 beaver tegra_defconfig : passed 1:00.54 capri bcm_defconfig : passed 0:38.06 capri multi_v7_defconfig : passed 0:40.58 cubie multi_v7_defconfig : passed 1:11.86 cubie2 multi_v7_defconfig : passed 0:57.74 cubie2 multi_lpae_defconfig : passed 1:03.23 cubox dove_defconfig : passed 1:15.40 dalmore tegra_defconfig : passed 1:25.05 dalmore multi_v7_defconfig : passed 1:02.04 dalmore multi_lpae_defconfig : passed 0:59.05 panda omap2plus_defconfig : passed 1:30.74 panda multi_v7_defconfig : passed 1:34.92 sama5 sama5_defconfig : passed 1:56.22 seaboard tegra_defconfig : passed 1:02.47 seaboard multi_v7_defconfig : passed 0:55.42 snow exynos_defconfig : passed 1:44.37 snowball u8500_defconfig : passed 2:25.05 snowball multi_v7_defconfig : passed 0:58.47 trimslice tegra_defconfig : passed 1:01.30 trimslice multi_v7_defconfig : passed 0:45.50 wandboard imx_v6_v7_defconfig : passed 1:07.62 wandboard multi_v7_defconfig : passed 0:45.75 Offline boards: beaver multi_v7_defconfig : OFFLINE 0:39.68 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board bbb-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.245271] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.246044] mop500-uib: failed to get adapter i2c2 [ 0.262452] NFS: Registering the id_resolver key type [ 0.262567] Key type id_resolver registered [ 0.262581] Key type id_legacy registered [ 0.262981] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.263002] io scheduler noop registered [ 0.263014] io scheduler deadline registered [ 0.263258] io scheduler cfq registered (default) [ 0.264112] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.341761] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.343658] Serial: IMX driver [ 0.344621] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0 [ 0.936453] console [ttyO0] enabled [ 0.941264] serial: Freescale lpuart driver [ 0.946052] [drm] Initialized drm 1.1.0 20060810 [ 0.953007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.959892] ehci-platform: EHCI generic platform driver [ 0.965563] ehci-omap: OMAP-EHCI Host Controller driver [ 0.971194] ehci-orion: EHCI orion driver [ 0.975507] SPEAr-ehci: EHCI SPEAr driver [ 0.979828] tegra-ehci: Tegra EHCI driver [ 0.984435] usbcore: registered new interface driver usb-storage [ 0.992273] mousedev: PS/2 mouse device common for all mice [ 0.999464] sdhci: Secure Digital Host Controller Interface driver [ 1.006073] sdhci: Copyright(c) Pierre Ossman [ 1.011101] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.018058] usbcore: registered new interface driver usbhid [ 1.023980] usbhid: USB HID core driver [ 1.028424] TCP: cubic registered [ 1.032841] NET: Registered protocol family 10 [ 1.038576] sit: IPv6 over IPv4 tunneling driver [ 1.044575] Key type dns_resolver registered [ 1.049274] Registering SWP/SWPB emulation handler [ 1.055150] regulator-dummy: disabling [ 1.060608] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.066603] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.076698] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board bbb-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.837945] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.849976] of_get_named_gpio_flags exited with status 53 [ 1.855917] of_get_named_gpio_flags exited with status 54 [ 1.861677] of_get_named_gpio_flags exited with status 55 [ 1.867373] of_get_named_gpio_flags exited with status 56 [ 1.873147] of_get_named_gpio_flags exited with status 53 [ 1.881384] of_get_named_gpio_flags exited with status 54 [ 1.888112] of_get_named_gpio_flags exited with status 55 [ 1.894754] of_get_named_gpio_flags exited with status 56 [ 1.903716] ledtrig-cpu: registered to indicate activity on CPUs [ 1.912387] usbcore: registered new interface driver usbhid [ 1.918266] usbhid: USB HID core driver [ 1.924504] oprofile: no performance counters [ 1.932522] oprofile: using timer interrupt. [ 1.937947] TCP: cubic registered [ 1.941691] Initializing XFRM netlink socket [ 1.946418] NET: Registered protocol family 17 [ 1.951289] NET: Registered protocol family 15 [ 1.956492] Key type dns_resolver registered [ 1.961227] ThumbEE CPU extension supported. [ 1.965779] Registering SWP/SWPB emulation handler [ 1.975799] regulator-dummy: disabling [ 1.996545] DCDC1: at 1500 mV [ 2.003454] vdd_mpu: 925 <--> 1325 mV at 1100 mV [ 2.011785] vdd_core: 925 <--> 1150 mV at 1100 mV [ 2.019529] LDO1: at 1800 mV [ 2.025631] LDO2: at 3300 mV [ 2.032950] LDO3: 1800 mV [ 2.038568] LDO4: at 3300 mV [ 2.046319] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.052234] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.121115] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.127559] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.137688] libphy: 4a101000.mdio: probed [ 2.142098] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.152311] Random MACID = 96:10:e3:50:73:bc [ 2.163319] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.177353] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_lpae_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################## 556.6 KiB/s done Bytes transferred = 3585464 (36b5b8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_lpae_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x36b5b8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_v7_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################# 555.7 KiB/s done Bytes transferred = 3570392 (367ad8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x82000000 queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/multi_v7_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x367ad8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/omap2plus_defconfig/zImage'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################################# ######################### 628.9 KiB/s done Bytes transferred = 4173288 (3fade8 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot#tftp 0x82000000 queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb tftp 0x82000000 queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.101 Filename 'queue/v3.12.22/omap2plus_defconfig/dtbs/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T ## 2.9 KiB/s done Bytes transferred = 17789 (457d hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200 root=/dev/mmcblk1p2 rootwait debug U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x3fade8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8200757c Starting kernel ... ~$off # PYBOOT: Exception: timeout

10 years, 6 months

queue build: 17 warnings 0 failures (queue/v3.12.22)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was queue, found at: Local queue of patches applied from http://git.kernel.org/cgit/linux/kernel/git/stable/stable-queue.git Topmost commit: fe7b290 Linux 3.12.22 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/queue/v3.12.22/ Runtime: 34m 18s Passed: 117 Failed: 0 Warnings: 17 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:575:3: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:589:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:599:4: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:929:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-dma.c:959:2: warning: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/imx-sdma.c:1166:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/dma/ipu/ipu_idmac.c:1235:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/cdma_hw.c:57:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] 1 drivers/gpu/host1x/hw/debug_hw.c:175:10: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Wformat=] 1 drivers/tty/serial/imx.c:1542:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 2 drivers/mtd/nand/gpmi-nand/gpmi-nand.c:120:13: warning: 'set_geometry_by_ecc_info' defined but not used [-Wunused-function] Section mismatches:

10 years, 6 months

mainline boot: 23 passed 18 failed (mainline/v3.15-11940-g6391f34)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.32 capri bcm_defconfig : FAILED 1:23.83 capri multi_v7_defconfig : FAILED 1:24.99 cubox multi_v7_defconfig : FAILED 1:38.90 dalmore multi_v7_defconfig : FAILED 1:35.76 dalmore multi_lpae_defconfig : FAILED 1:30.73 hummingboard multi_v7_defconfig : FAILED 1:29.30 jetson multi_v7_defconfig : FAILED 1:30.53 jetson multi_lpae_defconfig : FAILED 1:26.79 omap5uevm omap2plus_defconfig : FAILED 1:43.86 omap5uevm multi_v7_defconfig : FAILED 1:56.56 omap5uevm multi_lpae_defconfig : FAILED 1:51.94 sama5 sama5_defconfig : FAILED 3:00.50 seaboard multi_v7_defconfig : FAILED 0:39.24 snow multi_v7_defconfig : FAILED 1:13.34 snow multi_lpae_defconfig : FAILED 1:13.88 snowball u8500_defconfig : FAILED 1:44.79 wandboard multi_v7_defconfig : FAILED 1:44.19 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:12.96 arndale exynos_defconfig : passed 1:19.92 arndale multi_v7_defconfig : passed 1:38.29 arndale multi_lpae_defconfig : passed 1:27.22 bbb omap2plus_defconfig : passed 1:28.55 bbb multi_v7_defconfig : passed 1:20.84 beaver tegra_defconfig : passed 0:53.68 cubie sunxi_defconfig : passed 1:19.07 cubie multi_v7_defconfig : passed 1:16.46 cubie2 sunxi_defconfig : passed 1:10.87 cubie2 multi_v7_defconfig : passed 1:29.41 cubie2 multi_lpae_defconfig : passed 1:22.14 dalmore tegra_defconfig : passed 1:18.52 hummingboard imx_v6_v7_defconfig : passed 1:26.58 jetson tegra_defconfig : passed 2:04.87 panda omap2plus_defconfig : warnings 1:37.66 panda multi_v7_defconfig : warnings 1:53.60 seaboard tegra_defconfig : passed 1:00.61 snow exynos_defconfig : passed 1:32.17 snowball multi_v7_defconfig : passed 5:12.93 trimslice tegra_defconfig : passed 3:56.01 trimslice multi_v7_defconfig : passed 3:48.65 wandboard imx_v6_v7_defconfig : passed 1:07.97 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.565595] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.571689] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.576654] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.582747] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.590497] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.597609] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.603208] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.609590] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.619588] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.629943] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.636572] [drm] No driver support for vblank timestamp query. [ 3.642515] host1x drm: No connectors reported connected with modes [ 3.648779] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.671759] Console: switching to colour frame buffer device 128x48 [ 3.683527] host1x drm: fb0: frame buffer device [ 3.688223] host1x drm: registered panic notifier [ 3.698604] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.704869] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.712310] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.723795] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.729201] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.737009] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.748211] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.754562] hub 1-0:1.0: USB hub found [ 3.758339] hub 1-0:1.0: 1 port detected [ 3.762710] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.768123] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.775873] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.788591] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.794882] hub 2-0:1.0: USB hub found [ 3.798652] hub 2-0:1.0: 1 port detected [ 3.806614] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.819409] usb1_vbus: disabling [ 3.822810] ALSA device list: [ 3.825806] #0: NVIDIA Tegra Beaver [ 3.830081] Waiting for root device /dev/mmcblk0p1... [ 4.108618] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.572490] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.225624] hub 2-0:1.0: 1 port detected [ 1.229997] SPEAr-ehci: EHCI SPEAr driver [ 1.234102] tegra-ehci: Tegra EHCI driver [ 1.238232] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.244413] ohci-pci: OHCI PCI platform driver [ 1.248921] ohci-platform: OHCI generic platform driver [ 1.254234] ohci-omap3: OHCI OMAP3 driver [ 1.258332] SPEAr-ohci: OHCI SPEAr driver [ 1.263073] usbcore: registered new interface driver usb-storage [ 1.270626] mousedev: PS/2 mouse device common for all mice [ 1.277635] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.286983] i2c /dev entries driver [ 1.293319] usbcore: registered new interface driver uvcvideo [ 1.299067] USB Video Class driver (1.1.1) [ 1.303164] gspca_main: v2.14.0 registered [ 1.310469] orion_wdt: Initial timeout 25 sec [ 1.315909] sdhci: Secure Digital Host Controller Interface driver [ 1.322078] sdhci: Copyright(c) Pierre Ossman [ 1.326998] Synopsys Designware Multimedia Card Interface Driver [ 1.333680] usbcore: registered new interface driver usbhid [ 1.339244] usbhid: USB HID core driver [ 1.347184] TCP: cubic registered [ 1.350528] NET: Registered protocol family 17 [ 1.354985] can: controller area network core (rev 20120528 abi 9) [ 1.361216] NET: Registered protocol family 29 [ 1.365651] can: raw protocol (rev 20120528) [ 1.369917] can: broadcast manager protocol (rev 20120528 t) [ 1.375578] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381452] Key type dns_resolver registered [ 1.385931] ThumbEE CPU extension supported. [ 1.390212] Registering SWP/SWPB emulation handler [ 1.395002] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399713] ata1: SATA link down (SStatus 0 SControl F300) [ 1.406186] USB Power: 5000 mV [ 1.409718] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 08:15:46 UTC (1402733746) [ 1.420287] ALSA device list: [ 1.423243] No soundcards found. [ 1.427169] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.970246] i2c 0-004c: Driver lm90 requests probe deferral [ 2.977664] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.983270] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.993185] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.999657] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.009999] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.015618] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.025595] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.041763] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.051185] hub 1-0:1.0: USB hub found [ 3.055263] hub 1-0:1.0: 1 port detected [ 3.061444] i2c 0-004c: Driver lm90 requests probe deferral [ 3.068782] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.074391] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.084303] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.090767] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.102247] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.110403] i2c 0-004c: Driver lm90 requests probe deferral [ 3.118270] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.118307] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.156172] VDD_5V0_HDMI_CON: disabling [ 3.156218] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.167129] vdd_cam_1v8_reg: disabling [ 3.171169] vdd_hdmi_5v0: disabling [ 3.174822] usb1_vbus: disabling [ 3.178126] dvdd_ts: disabling [ 3.186076] ALSA device list: [ 3.189175] #0: NVIDIA Tegra Dalmore [ 3.195365] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.201867] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.209709] Waiting for root device /dev/mmcblk0p1... [ 3.377139] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.861339] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.872780] i2c 0-004c: Driver lm90 requests probe deferral [ 3.880380] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.886019] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.895942] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.902425] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.964579] i2c 0-004c: Driver lm90 requests probe deferral [ 2.971671] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.977192] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.986614] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.992974] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.003006] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.008558] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.019228] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.031834] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.041649] hub 1-0:1.0: USB hub found [ 3.045635] hub 1-0:1.0: 1 port detected [ 3.051940] i2c 0-004c: Driver lm90 requests probe deferral [ 3.059319] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.064915] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.074762] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.081226] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.092830] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.100981] i2c 0-004c: Driver lm90 requests probe deferral [ 3.106701] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.145377] VDD_5V0_HDMI_CON: disabling [ 3.149352] vdd_cam_1v8_reg: disabling [ 3.153531] vdd_hdmi_5v0: disabling [ 3.157247] usb1_vbus: disabling [ 3.160539] dvdd_ts: disabling [ 3.167931] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.168609] ALSA device list: [ 3.168624] #0: NVIDIA Tegra Dalmore [ 3.180375] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.183315] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.183556] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.203430] Waiting for root device /dev/mmcblk0p1... [ 3.357076] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.836312] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.847922] i2c 0-004c: Driver lm90 requests probe deferral [ 3.855338] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.860934] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.870624] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.877005] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031433] usbcore: registered new interface driver usb-storage [ 1.042550] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047765] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052707] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.065192] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071387] hub 1-0:1.0: USB hub found [ 1.075201] hub 1-0:1.0: 1 port detected [ 1.082878] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087984] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092907] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.105205] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111346] hub 2-0:1.0: USB hub found [ 1.115149] hub 2-0:1.0: 1 port detected [ 1.119930] mousedev: PS/2 mouse device common for all mice [ 1.128205] i2c /dev entries driver [ 1.132950] usbcore: registered new interface driver uvcvideo [ 1.138730] USB Video Class driver (1.1.1) [ 1.142858] gspca_main: v2.14.0 registered [ 1.149592] sdhci: Secure Digital Host Controller Interface driver [ 1.155807] sdhci: Copyright(c) Pierre Ossman [ 1.161010] Synopsys Designware Multimedia Card Interface Driver [ 1.167959] usbcore: registered new interface driver usbhid [ 1.173561] usbhid: USB HID core driver [ 1.181756] TCP: cubic registered [ 1.185094] NET: Registered protocol family 17 [ 1.189593] can: controller area network core (rev 20120528 abi 9) [ 1.195857] NET: Registered protocol family 29 [ 1.200335] can: raw protocol (rev 20120528) [ 1.204618] can: broadcast manager protocol (rev 20120528 t) [ 1.210308] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216186] Key type dns_resolver registered [ 1.220638] ThumbEE CPU extension supported. [ 1.224939] Registering SWP/SWPB emulation handler [ 1.230926] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.245968] ALSA device list: [ 1.248952] No soundcards found. [ 1.253064] Waiting for root device /dev/mmcblk0p2... [ 60.325318] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.068029] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.076251] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.085824] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.092011] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.100167] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.105623] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.113370] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.126940] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.133807] hub 2-0:1.0: USB hub found [ 2.137654] hub 2-0:1.0: 1 port detected [ 2.142424] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.146949] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.154506] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.162731] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.172378] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.178574] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.186856] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.194313] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.198912] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.198939] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.215150] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.215211] +5V_HDMI_CON: disabling [ 2.215220] +USB0_VBUS_SW: disabling [ 2.215225] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.215642] ALSA device list: [ 2.215647] #0: NVIDIA Tegra Jetson TK1 [ 2.242130] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.243434] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.243519] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.264666] Waiting for root device /dev/mmcblk0p1... [ 2.451978] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.914827] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.925923] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.930475] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.937978] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.946172] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.955650] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.961823] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.063382] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.071607] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.081178] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.087374] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.095542] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.101006] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.108765] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.122121] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.128992] hub 2-0:1.0: USB hub found [ 2.132841] hub 2-0:1.0: 1 port detected [ 2.137597] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.142132] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.149695] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.157922] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.167564] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.173765] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 2.182152] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.189630] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.194263] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.194289] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:23 UTC (949363223) [ 2.210511] +5V_HDMI_CON: disabling [ 2.210517] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.210548] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.230867] +USB0_VBUS_SW: disabling [ 2.234482] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.239205] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.239466] ALSA device list: [ 2.239471] #0: NVIDIA Tegra Jetson TK1 [ 2.: Driver tegra-hdmi requests probe deferral [ 2.257279] Waiting for root device /dev/mmcblk0p1... [ 2.447156] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.909861] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 [ 2.920968] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.925521] reg-fixed-voltage regulators:regulator@11: Failed to find supply vin [ 2.933026] reg-fixed-voltage regulators:regulator@11: Failed to register regulator: -517 [ 2.941220] platform regulators:regulator@11: Driver reg-fixed-voltage requests probe deferral [ 2.950690] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.956844] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.071435] can: raw protocol (rev 20120528) [ 47.071441] can: broadcast manager protocol (rev 20120528 t) [ 47.071450] can: netlink gateway (rev 20130117) max_hops=1 [ 47.071758] Key type dns_resolver registered [ 47.071841] omap_vc_init_channel: No PMIC info for vdd_core [ 47.071843] omap_vp_init: No PMIC info for vdd_core [ 47.071846] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.071848] omap_vp_init: No PMIC info for vdd_mm [ 47.071852] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.071854] omap_vp_init: No PMIC info for vdd_mpu [ 47.072163] ThumbEE CPU extension supported. [ 47.072179] Registering SWP/SWPB emulation handler [ 47.077502] palmas 0-0048: Irq flag is 0x00000000 [ 47.148711] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.149553] mmc0: new high speed MMC card at address 0001 [ 47.149813] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.151613] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.156609] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.157188] mmcblk0: unknown partition table [ 47.157966] mmcblk0boot1: unknown partition table [ 47.158715] mmcblk0boot0: unknown partition table [ 47.193522] smps123: 600 <--> 1500 mV at 1060 mV [ 47.199653] smps45: 600 <--> 1310 mV at 1030 mV [ 47.206044] smps6: 1200 mV [ 47.210012] smps7: 1800 mV [ 47.214118] smps8: 600 <--> 1310 mV at 1040 mV [ 47.219859] smps9: failed to get the current voltage [ 47.225111] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.237171] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.361790] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.506799] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.512879] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.520313] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.527173] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.534884] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.548345] ALSA device list: [ 47.551441] No soundcards found. [ 47.555443] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.522527] TCP: cubic registered [ 47.522535] NET: Registered protocol family 17 [ 47.522550] can: controller area network core (rev 20120528 abi 9) [ 47.522599] NET: Registered protocol family 29 [ 47.522606] can: raw protocol (rev 20120528) [ 47.522612] can: broadcast manager protocol (rev 20120528 t) [ 47.522621] can: netlink gateway (rev 20130117) max_hops=1 [ 47.522905] Key type dns_resolver registered [ 47.522983] omap_vc_init_channel: No PMIC info for vdd_core [ 47.522985] omap_vp_init: No PMIC info for vdd_core [ 47.522989] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.522991] omap_vp_init: No PMIC info for vdd_mm [ 47.522994] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.522996] omap_vp_init: No PMIC info for vdd_mpu [ 47.523311] ThumbEE CPU extension supported. [ 47.523326] Registering SWP/SWPB emulation handler [ 47.532514] palmas 0-0048: Irq flag is 0x00000000 [ 47.614836] mmcblk0: unknown partition table [ 47.620178] mmcblk0boot1: unknown partition table [ 47.625968] mmcblk0boot0: unknown partition table [ 47.631137] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.638739] smps123: 600 <--> 1500 mV at 1060 mV [ 47.644879] smps45: 600 <--> 1310 mV at 1030 mV [ 47.651299] smps6: 1200 mV [ 47.655290] smps7: 1800 mV [ 47.659426] smps8: 600 <--> 1310 mV at 1040 mV [ 47.665157] smps9: failed to get the current voltage [ 47.670401] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.682446] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.806796] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.814722] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.820807] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.828259] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.835113] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.842818] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.856239] ALSA device list: [ 47.859348] No soundcards found. [ 47.863363] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.951131] Key type dns_resolver registered [ 1.951248] omap_vc_init_channel: No PMIC info for vdd_core [ 1.951251] omap_vp_init: No PMIC info for vdd_core [ 1.951261] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.951264] omap_vp_init: No PMIC info for vdd_mm [ 1.951273] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.951275] omap_vp_init: No PMIC info for vdd_mpu [ 1.951842] ThumbEE CPU extension supported. [ 1.951867] Registering SWP/SWPB emulation handler [ 1.951879] SmartReflex Class3 initialized [ 1.973460] palmas 0-0048: Irq flag is 0x00000000 [ 2.033965] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.034217] mmc0: new high speed MMC card at address 0001 [ 2.039980] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.040222] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.040423] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.043216] mmcblk0: unknown partition table [ 2.045301] mmcblk0boot1: unknown partition table [ 2.047269] mmcblk0boot0: unknown partition table [ 2.123587] smps123: 600 <--> 1500 mV at 1060 mV [ 2.130734] smps45: 600 <--> 1310 mV at 1030 mV [ 2.138078] smps6: 1200 mV [ 2.142808] smps7: 1800 mV [ 2.147700] smps8: 600 <--> 1310 mV at 1040 mV [ 2.154175] smps9: failed to get the current voltage [ 2.160122] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.174469] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.183306] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.191152] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.197258] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.206390] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.215788] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.222780] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.231379] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.240071] sr_init: No PMIC hook to init smartreflex [ 2.245534] sr_init: platform driver register failed for SR [ 2.273749] pbias_mmc_omap5: disabling [ 2.279257] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3020 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.120639] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.127261] hub 3-0:1.0: USB hub found [ 2.131064] hub 3-0:1.0: 1 port detected [ 2.136084] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.143110] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 08:16:38 UTC (1402733798) [ 2.155677] vdd_1v2: disabling [ 2.158895] vdd_1v5: disabling [ 2.222004] ALSA device list: [ 2.224965] #0: NVIDIA Tegra Seaboard [ 2.229443] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.237203] Please append a correct "root=" boot option; here are the available partitions: [ 2.245557] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.253807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-11940-g6391f34 #1 [ 2.261042] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.268781] [<c0211c68>] (show_stack) from [<c0810f84>] (dump_stack+0x88/0x98) [ 2.275993] [<c0810f84>] (dump_stack) from [<c080ddd4>] (panic+0xa0/0x218) [ 2.282863] [<c080ddd4>] (panic) from [<c0ad60b0>] (mount_block_root+0x1a0/0x230) [ 2.290335] [<c0ad60b0>] (mount_block_root) from [<c0ad6248>] (mount_root+0x108/0x110) [ 2.298239] [<c0ad6248>] (mount_root) from [<c0ad63a8>] (prepare_namespace+0x158/0x1a0) [ 2.306230] [<c0ad63a8>] (prepare_namespace) from [<c0ad5d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.315087] [<c0ad5d6c>] (kernel_init_freeable) from [<c080c0cc>] (kernel_init+0x8/0xf0) [ 2.323165] [<c080c0cc>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.330721] CPU1: stopping [ 2.333424] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-11940-g6391f34 #1 [ 2.340643] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.348378] [<c0211c68>] (show_stack) from [<c0810f84>] (dump_stack+0x88/0x98) [ 2.355589] [<c0810f84>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.362973] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.370529] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.377994] Exception stack(0xea087f68 to 0xea087fb0) [ 2.383035] 7f60: 00000000 c0bbdf94 c0bbdf94 0000004c 8ae11da8 00000000 [ 2.391197] 7f80: 8ae2cb58 00000000 eafb6db0 ea086000 00000000 c081e054 00000015 ea087fb0 [ 2.399356] 7fa0: c06b2fe0 c06b2fec 60000113 ffffffff [ 2.404404] [<c02127c0>] (__irq_svc) from [<c06b2fec>] (cpuidle_enter_state+0x68/0x100) [ 2.412402] [<c06b2fec>] (cpuidle_enter_state) from [<c027f4a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.421173] [<c027f4a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.427946] drm_kms_helper: panic occurred, switching back to text console [ 2.434828] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521744 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1998952K/2093056K available (6459K kernel code, 891K rwdata, 2576K rodata, 664K init, 307K bss, 94104K reserved, 1314816K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0adb1ac (9037 kB) [ 0.000000] .init : 0xc0adc000 - 0xc0b82100 ( 665 kB) [ 0.000000] .data : 0xc0b84000 - 0xc0c62dc0 ( 892 kB) [ 0.000000] .bss : 0xc0c62dc8 - 0xc0cafd08 ( 308 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C: failed to init: -19 [ 0.000000] Exynos5250: clock setup completed, armclk=1700000000 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 0.000006] Switching to timer-based delay loop [ 2889.600037] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.600572] Console: colour dummy device 80x30 [ 2889.600584] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.600592] pid_max: default: 32768 minimum: 301 [ 2889.600654] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.600659] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.600930] CPU: Testing write buffer coherency: ok [ 2889.601041] CPU0: update cpu_capacity 1024 [ 2889.601046] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.601143] Setting up static identity map for 0x4081d998 - 0x4081da30 [ 2889.602234] CPU1: Booted secondary processor [ 2889.~$off # PYBOOT: Exception: timeout ======================================================================== Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.000006] Switching to timer-based delay loop [ 2889.730105] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns [ 2889.730651] Console: colour dummy device 80x30 [ 2889.730662] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) [ 2889.730669] pid_max: default: 32768 minimum: 301 [ 2889.730731] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.730736] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2889.731006] CPU: Testing write buffer coherency: ok [ 2889.731118] CPU0: update cpu_capacity 1024 [ 2889.731124] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 2889.731220] Setting up static identity map for 0x40816a08 - 0x40816aa0 [ 2889.732315] CPU1: Booted secondary processor [ 2889.732348] CPU1: update cpu_capacity 1024 [ 2889.732351] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 2889.732396] Brought up 2 CPUs [ 2889.732405] SMP: Total of 2 processors activated. [ 2889.732408] CPU: All CPU(s) started in HYP mode. [ 2889.732412] CPU: Virtualization extensions available. [ 2889.732655] devtmpfs: initialized [ 2889.734577] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 2889.734778] pinctrl core: initialized pinctrl subsystem [ 2889.734979] regulator-dummy: no parameters [ 2889.740879] NET: Registered protocol family 16 [ 2889.741765] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2889.742485] cpuidle: using governor ladder [ 2889.742492] cpuidle: using governor menu [ 2889.747546] exynos-audss-clk 3810000.audss-clock-controller: setup completed [ 2889.751408] No ATAGs? [ 2889.751427] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.751432] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.751525] EXYNOS5250 PMU Initialize [ 2889.752739] Serial: AMBA PL011 UART driver [ 2920.594304] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594315] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594607] vbat-supply: no parameters [ 2920.594743] P5.0V_USB3CON: 5000 mV [ 2920.595896] vgaarb: loaded [ 2920.596178] SCSI subsystem initialized [ 2920.596259~$off # PYBOOT: Exception: timeout ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.637359] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.645294] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.657226] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.664550] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.676025] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.684539] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.696472] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.703765] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.715270] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.723083] HS USB OTG: no transceiver configured [ 3.727783] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.735626] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.743530] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755462] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.762786] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774261] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.782775] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794677] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802001] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813476] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821289] HS USB OTG: no transceiver configured [ 3.825988] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.833862] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.841766] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853698] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.860992] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872467] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881011] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.892913] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900238] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911712] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919525] HS USB OTG: no transceiver configured [ 3.924224] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932098] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940002] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.951904] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959228] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970703] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.070051] ohci-platform: OHCI generic platform driver [ 1.075444] ohci-omap3: OHCI OMAP3 driver [ 1.079608] SPEAr-ohci: OHCI SPEAr driver [ 1.084441] usbcore: registered new interface driver usb-storage [ 1.095466] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.100550] ci_hdrc ci_hdrc.0: no supported roles [ 1.105382] 2184200.usb supply vbus not found, using dummy regulator [ 1.115483] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.120570] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.125488] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.142728] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.148918] hub 1-0:1.0: USB hub found [ 1.152723] hub 1-0:1.0: 1 port detected [ 1.157426] mousedev: PS/2 mouse device common for all mice [ 1.165566] i2c /dev entries driver [ 1.170278] usbcore: registered new interface driver uvcvideo [ 1.176057] USB Video Class driver (1.1.1) [ 1.180186] gspca_main: v2.14.0 registered [ 1.186880] sdhci: Secure Digital Host Controller Interface driver [ 1.193087] sdhci: Copyright(c) Pierre Ossman [ 1.198298] Synopsys Designware Multimedia Card Interface Driver [ 1.205209] usbcore: registered new interface driver usbhid [ 1.210809] usbhid: USB HID core driver [ 1.218637] TCP: cubic registered [ 1.221973] NET: Registered protocol family 17 [ 1.226465] can: controller area network core (rev 20120528 abi 9) [ 1.232735] NET: Registered protocol family 29 [ 1.237195] can: raw protocol (rev 20120528) [ 1.241492] can: broadcast manager protocol (rev 20120528 t) [ 1.247183] can: netlink gateway (rev 20130117) max_hops=1 [ 1.253082] Key type dns_resolver registered [ 1.257858] ThumbEE CPU extension supported. [ 1.262159] Registering SWP/SWPB emulation handler [ 1.268201] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.283250] ALSA device list: [ 1.286234] No soundcards found. [ 1.290215] Waiting for root device /dev/mmcblk0p2... [ 60.323238] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next boot: 28 passed 12 failed (next/next-20140613)

by Olof's autobooter

Failed boards: beaver multi_v7_defconfig : FAILED 1:27.76 capri bcm_defconfig : FAILED 1:24.72 capri multi_v7_defconfig : FAILED 1:24.69 cubox multi_v7_defconfig : FAILED 1:31.86 dalmore multi_v7_defconfig : FAILED 1:34.12 dalmore multi_lpae_defconfig : FAILED 1:30.63 hummingboard multi_v7_defconfig : FAILED 1:26.67 jetson multi_v7_defconfig : FAILED 1:25.80 sama5 sama5_defconfig : FAILED 3:02.07 seaboard multi_v7_defconfig : FAILED 0:37.64 snowball u8500_defconfig : FAILED 1:51.66 wandboard multi_v7_defconfig : FAILED 1:37.87 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.95 arndale exynos_defconfig : passed 1:22.04 arndale multi_v7_defconfig : passed 1:37.71 arndale multi_lpae_defconfig : passed 1:29.27 bbb omap2plus_defconfig : passed 1:29.14 bbb multi_v7_defconfig : passed 1:28.83 beaver tegra_defconfig : passed 1:02.29 cubie sunxi_defconfig : passed 1:10.41 cubie multi_v7_defconfig : passed 1:18.97 cubie2 sunxi_defconfig : passed 1:27.59 cubie2 multi_v7_defconfig : passed 1:22.92 cubie2 multi_lpae_defconfig : passed 1:05.51 dalmore tegra_defconfig : passed 1:23.02 hummingboard imx_v6_v7_defconfig : passed 1:32.93 jetson tegra_defconfig : passed 3:53.79 omap5uevm omap2plus_defconfig : warnings 1:00.71 omap5uevm multi_v7_defconfig : warnings 2:00.02 omap5uevm multi_lpae_defconfig : warnings 1:54.77 panda omap2plus_defconfig : warnings 1:35.42 panda multi_v7_defconfig : warnings 1:52.54 seaboard tegra_defconfig : passed 1:06.00 snow exynos_defconfig : passed 0:58.92 snow multi_v7_defconfig : passed 1:00.19 snow multi_lpae_defconfig : passed 1:00.42 snowball multi_v7_defconfig : passed 5:09.07 trimslice tegra_defconfig : passed 3:59.24 trimslice multi_v7_defconfig : passed 3:59.44 wandboard imx_v6_v7_defconfig : passed 1:10.61 Offline boards: jetson multi_lpae_defconfig : OFFLINE 1:42.97 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.571477] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.577564] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.582522] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.588608] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.596351] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.603451] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.609041] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.615396] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf001e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.625393] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.635860] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.642492] [drm] No driver support for vblank timestamp query. [ 3.648442] host1x drm: No connectors reported connected with modes [ 3.654706] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.678258] Console: switching to colour frame buffer device 128x48 [ 3.689978] host1x drm: fb0: frame buffer device [ 3.694675] host1x drm: registered panic notifier [ 3.713606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.719881] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.727334] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.738821] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.744227] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.752038] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.763212] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.769566] hub 1-0:1.0: USB hub found [ 3.773343] hub 1-0:1.0: 1 port detected [ 3.777708] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.783120] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.790851] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.803596] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.809892] hub 2-0:1.0: USB hub found [ 3.813664] hub 2-0:1.0: 1 port detected [ 3.821549] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.834381] usb1_vbus: disabling [ 3.837786] ALSA device list: [ 3.840768] #0: NVIDIA Tegra Beaver [ 3.845001] Waiting for root device /dev/mmcblk0p1... [ 4.123622] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.592341] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-bcm_defconfig failure log: ------------------------------------------------- [ 0.460000] iosr1: 1800 mV [ 0.460000] iosr2: at 1800 mV [ 0.470000] msr: at 1120 mV [ 0.470000] sdsr1: at 1240 mV [ 0.470000] sdsr2: at 1240 mV [ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board capri-multi_v7_defconfig failure log: ------------------------------------------------- [ 0.545000] ehci-omap: OMAP-EHCI Host Controller driver [ 0.550000] ehci-orion: EHCI orion driver [ 0.550000] SPEAr-ehci: EHCI SPEAr driver [ 0.555000] tegra-ehci: Tegra EHCI driver [ 0.555000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.560000] ohci-pci: OHCI PCI platform driver [ 0.560000] ohci-platform: OHCI generic platform driver [ 0.565000] ohci-omap3: OHCI OMAP3 driver [ 0.565000] SPEAr-ohci: OHCI SPEAr driver [ 0.570000] usbcore: registered new interface driver usb-storage [ 0.575000] mousedev: PS/2 mouse device common for all mice [ 0.580000] i2c /dev entries driver [ 0.585000] bcm-kona-i2c 3e016000.i2c: device registered successfully [ 0.590000] bcm-kona-i2c 3e017000.i2c: device registered successfully [ 0.595000] bcm-kona-i2c 3e018000.i2c: device registered successfully [ 0.600000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.605000] usbcore: registered new interface driver uvcvideo [ 0.610000] USB Video Class driver (1.1.1) [ 0.610000] gspca_main: v2.14.0 registered [ 0.615000] sdhci: Secure Digital Host Controller Interface driver [ 0.620000] sdhci: Copyright(c) Pierre Ossman [ 0.620000] Synopsys Designware Multimedia Card Interface Driver [ 0.625000] usbcore: registered new interface driver usbhid [ 0.630000] usbhid: USB HID core driver [ 0.635000] TCP: cubic registered [ 0.635000] NET: Registered protocol family 17 [ 0.640000] can: controller area network core (rev 20120528 abi 9) [ 0.645000] NET: Registered protocol family 29 [ 0.645000] can: raw protocol (rev 20120528) [ 0.650000] can: broadcast manager protocol (rev 20120528 t) [ 0.655000] can: netlink gateway (rev 20130117) max_hops=1 [ 0.660000] Key type dns_resolver registered [ 0.660000] ThumbEE CPU extension supported. [ 0.665000] Registering SWP/SWPB emulation handler [ 0.670000] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.675000] ALSA device list: [ 0.675000] No soundcards found. [ 0.680000] Waiting for root device /dev/mmcblk0p8... ~$off # PYBOOT: Exception: timeout ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.226254] hub 2-0:1.0: 1 port detected [ 1.230627] SPEAr-ehci: EHCI SPEAr driver [ 1.234739] tegra-ehci: Tegra EHCI driver [ 1.238868] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.245050] ohci-pci: OHCI PCI platform driver [ 1.249558] ohci-platform: OHCI generic platform driver [ 1.254881] ohci-omap3: OHCI OMAP3 driver [ 1.258986] SPEAr-ohci: OHCI SPEAr driver [ 1.263734] usbcore: registered new interface driver usb-storage [ 1.271291] mousedev: PS/2 mouse device common for all mice [ 1.278310] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.287666] i2c /dev entries driver [ 1.293127] usbcore: registered new interface driver uvcvideo [ 1.298883] USB Video Class driver (1.1.1) [ 1.302974] gspca_main: v2.14.0 registered [ 1.310224] orion_wdt: Initial timeout 25 sec [ 1.315736] sdhci: Secure Digital Host Controller Interface driver [ 1.321900] sdhci: Copyright(c) Pierre Ossman [ 1.326814] Synopsys Designware Multimedia Card Interface Driver [ 1.333502] usbcore: registered new interface driver usbhid [ 1.339059] usbhid: USB HID core driver [ 1.346891] TCP: cubic registered [ 1.350197] NET: Registered protocol family 17 [ 1.354668] can: controller area network core (rev 20120528 abi 9) [ 1.360909] NET: Registered protocol family 29 [ 1.365333] can: raw protocol (rev 20120528) [ 1.369596] can: broadcast manager protocol (rev 20120528 t) [ 1.375250] can: netlink gateway (rev 20130117) max_hops=1 [ 1.381126] Key type dns_resolver registered [ 1.385607] ThumbEE CPU extension supported. [ 1.389875] Registering SWP/SWPB emulation handler [ 1.394665] PJ4 iWMMXt v2 coprocessor enabled. [ 1.399367] ata1: SATA link down (SStatus 0 SControl F300) [ 1.405875] USB Power: 5000 mV [ 1.409401] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-14 07:27:30 UTC (1402730850) [ 1.419930] ALSA device list: [ 1.422908] No soundcards found. [ 1.426833] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.965488] i2c 0-004c: Driver lm90 requests probe deferral [ 2.972987] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.978591] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.988574] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.995033] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.005275] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.010889] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.020888] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.036865] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.046734] hub 1-0:1.0: USB hub found [ 3.050732] hub 1-0:1.0: 1 port detected [ 3.057251] i2c 0-004c: Driver lm90 requests probe deferral [ 3.064792] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.070426] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.080402] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.086911] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.099035] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.107220] i2c 0-004c: Driver lm90 requests probe deferral [ 3.112930] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151151] VDD_5V0_HDMI_CON: disabling [ 3.155168] vdd_cam_1v8_reg: disabling [ 3.159551] vdd_hdmi_5v0: disabling [ 3.163253] usb1_vbus: disabling [ 3.166638] dvdd_ts: disabling [ 3.173955] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.174636] ALSA device list: [ 3.174652] #0: NVIDIA Tegra Dalmore [ 3.186450] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.189422] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189657] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.209314] Waiting for root device /dev/mmcblk0p1... [ 3.366948] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.850479] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.862032] i2c 0-004c: Driver lm90 requests probe deferral [ 3.869556] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.875195] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.885002] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.891471] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board dalmore-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.962119] i2c 0-004c: Driver lm90 requests probe deferral [ 2.969450] tegra-dsi 54300000.dsi: cannot get VDD supply [ 2.975048] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 2.984869] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 2.991333] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.001771] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.007367] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.016555] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.032203] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.042043] hub 1-0:1.0: USB hub found [ 3.046040] hub 1-0:1.0: 1 port detected [ 3.052469] i2c 0-004c: Driver lm90 requests probe deferral [ 3.060019] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.065653] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.075725] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.082237] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.094311] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.102528] i2c 0-004c: Driver lm90 requests probe deferral [ 3.108235] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.147170] VDD_5V0_HDMI_CON: disabling [ 3.151081] vdd_cam_1v8_reg: disabling [ 3.155312] vdd_hdmi_5v0: disabling [ 3.158981] usb1_vbus: disabling [ 3.162289] dvdd_ts: disabling [ 3.169753] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.170423] ALSA device list: [ 3.170439] #0: NVIDIA Tegra Dalmore [ 3.182167] platfodsi requests probe deferral [ 3.187083] Waiting for root device /dev/mmcblk0p1... [ 3.189468] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.189703] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral [ 3.362292] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.845677] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 3.857339] i2c 0-004c: Driver lm90 requests probe deferral [ 3.864827] tegra-dsi 54300000.dsi: cannot get VDD supply [ 3.870461] platform 54300000.dsi: Driver tegra-dsi requests probe deferral [ 3.880335] tegra-hdmi 54280000.hdmi: failed to get PLL regulator [ 3.886809] platform 54280000.hdmi: Driver tegra-hdmi requests probe deferral ~$off # PYBOOT: Exception: timeout ======================================================================== Board hummingboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.031197] usbcore: registered new interface driver usb-storage [ 1.042337] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.047549] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.052496] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.064989] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.071184] hub 1-0:1.0: USB hub found [ 1.074996] hub 1-0:1.0: 1 port detected [ 1.082655] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.087758] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.092680] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.104997] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.111139] hub 2-0:1.0: USB hub found [ 1.114934] hub 2-0:1.0: 1 port detected [ 1.119685] mousedev: PS/2 mouse device common for all mice [ 1.127982] i2c /dev entries driver [ 1.132673] usbcore: registered new interface driver uvcvideo [ 1.138449] USB Video Class driver (1.1.1) [ 1.142570] gspca_main: v2.14.0 registered [ 1.149292] sdhci: Secure Digital Host Controller Interface driver [ 1.155505] sdhci: Copyright(c) Pierre Ossman [ 1.160702] Synopsys Designware Multimedia Card Interface Driver [ 1.167673] usbcore: registered new interface driver usbhid [ 1.173274] usbhid: USB HID core driver [ 1.181989] TCP: cubic registered [ 1.185354] NET: Registered protocol family 17 [ 1.189825] can: controller area network core (rev 20120528 abi 9) [ 1.196085] NET: Registered protocol family 29 [ 1.200560] can: raw protocol (rev 20120528) [ 1.204841] can: broadcast manager protocol (rev 20120528 t) [ 1.210533] can: netlink gateway (rev 20130117) max_hops=1 [ 1.216415] Key type dns_resolver registered [ 1.220861] ThumbEE CPU extension supported. [ 1.225178] Registering SWP/SWPB emulation handler [ 1.231156] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.246354] ALSA device list: [ 1.249338] No soundcards found. [ 1.253437] Waiting for root device /dev/mmcblk0p2... [ 60.325110] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout ======================================================================== Board jetson-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.243811] hub 1-0:1.0: USB hub found [ 2.247640] hub 1-0:1.0: 1 port detected [ 2.252648] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 2.261098] +1.05V_RUN_AVDD_HDMI_PLL: 1050 mV [ 2.265643] +1.05V_RUN_AVDD_HDMI_PLL: supplied by +1.05V_RUN [ 2.273576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.280231] [drm] No driver support for vblank timestamp query. [ 2.286223] host1x drm: No connectors reported connected with modes [ 2.292518] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.307611] Console: switching to colour frame buffer device 128x48 [ 2.321122] host1x drm: fb0: frame buffer device [ 2.325853] host1x drm: registered panic notifier [ 2.342001] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.348576] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.354015] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 2.361889] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 2.377022] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.383815] hub 2-0:1.0: USB hub found [ 2.387627] hub 2-0:1.0: 1 port detected [ 2.392724] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 2.400073] as3722-rtc as3722-rtc: setting system clock to 2000-02-01 00:00:18 UTC (949363218) [ 2.418266] +1.05V_RUN_AVDD_HDMI_PLL: disabling [ 2.422814] +1.8V_RUN_VPP_FUSE: disabling [ 2.427242] +2.8V_RUN_CAM_AF: disabling [ 2.431427] +3.3V_RUN_TOUCH: disabling [ 2.435546] +1.05V_RUN_CAM_REAR: disabling [ 2.439790] +VDDIO_SDMMC3: disabling [ 2.443496] +1.2V_RUN_CAM_FRONT: disabling [ 2.447721] +2.8V_RUN_CAM: disabling [ 2.451412] +1.8V_RUN_CAM: disabling [ 2.455117] +1.05V_RUN: disabling [ 2.458561] +USB0_VBUS_SW: disabling [ 2.462147] +3.3V_AVDD_HDMI_AP_GATED: disabling [ 2.467020] ALSA device list: [ 2.469984] #0: NVIDIA Tegra Jetson TK1 [ 2.474608] Waiting for root device /dev/mmcblk0p1... [ 2.697007] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 3.159815] asix 2-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 68:7f:74:ba:ef:28 ~$off # PYBOOT: Exception: timeout ======================================================================== Board sama5-sama5_defconfig failure log: ------------------------------------------------- [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. [....] CONFIG_SYSFS_DEPRECATED must not be selected ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m [....] Booting will continue in 30 seconds but many things will be broken ...[?25l[?1c7[1G[[33mwarn[39;49m8[?25h[?0c [33m(warning).[39;49m random: nonblocking pool is initialized [....] Starting the hotplug events dispatcher: udevdudevd[708]: starting version 175 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:e1:88:0e Sending on LPF/eth0/08:00:08:e1:88:0e Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 macb f0028000.ethernet eth0: link up (1000/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 172.16.1.1 bound to 172.16.1.199 -- renewal in 3215 seconds. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2~$off # PYBOOT: Exception: timeout ======================================================================== Board seaboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.140560] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.147082] hub 3-0:1.0: USB hub found [ 2.150869] hub 3-0:1.0: 1 port detected [ 2.155713] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.162618] tps6586x-rtc tps6586x-rtc: setting system clock to 2014-06-14 07:28:34 UTC (1402730914) [ 2.174717] vdd_1v2: disabling [ 2.177938] vdd_1v5: disabling [ 2.181819] ALSA device list: [ 2.184777] #0: NVIDIA Tegra Seaboard [ 2.189187] VFS: Cannot open root device "mmcblk0p3" or unknown-block(0,0): error -6 [ 2.196943] Please append a correct "root=" boot option; here are the available partitions: [ 2.205298] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.213546] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #1 [ 2.220691] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.228428] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.235638] [<c0811e00>] (dump_stack) from [<c080ec50>] (panic+0xa0/0x218) [ 2.242504] [<c080ec50>] (panic) from [<c0ad80b0>] (mount_block_root+0x1a0/0x230) [ 2.249973] [<c0ad80b0>] (mount_block_root) from [<c0ad8248>] (mount_root+0x108/0x110) [ 2.257875] [<c0ad8248>] (mount_root) from [<c0ad83a8>] (prepare_namespace+0x158/0x1a0) [ 2.265864] [<c0ad83a8>] (prepare_namespace) from [<c0ad7d6c>] (kernel_init_freeable+0x1cc/0x1dc) [ 2.274720] [<c0ad7d6c>] (kernel_init_freeable) from [<c080cf48>] (kernel_init+0x8/0xf0) [ 2.282795] [<c080cf48>] (kernel_init) from [<c020e7b8>] (ret_from_fork+0x14/0x3c) [ 2.290348] CPU1: stopping [ 2.293049] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-next-20140613 #1 [ 2.300179] [<c02160fc>] (unwind_backtrace) from [<c0211c68>] (show_stack+0x10/0x14) [ 2.307911] [<c0211c68>] (show_stack) from [<c0811e00>] (dump_stack+0x88/0x98) [ 2.315119] [<c0811e00>] (dump_stack) from [<c021490c>] (handle_IPI+0x148/0x174) [ 2.322500] [<c021490c>] (handle_IPI) from [<c0208934>] (gic_handle_irq+0x64/0x68) [ 2.330053] [<c0208934>] (gic_handle_irq) from [<c02127c0>] (__irq_svc+0x40/0x50) [ 2.337515] Exception stack(0xea087f68 to 0xea087fb0) [ 2.342554] 7f60: 00000000 c0bc1fb4 c0bc1fb4 0000004c 88327480 00000000 [ 2.350714] 7f80: 887be160 00000000 eafb6db0 ea086000 00000000 c081f050 00000015 ea087fb0 [ 2.358870] 7fa0: c06b31ec c06b31f8 60000113 ffffffff [ 2.363915] [<c02127c0>] (__irq_svc) from [<c06b31f8>] (cpuidle_enter_state+0x68/0x100) [ 2.371912] [<c06b31f8>] (cpuidle_enter_state) from [<c027f2a8>] (cpu_startup_entry+0x1ec/0x210) [ 2.380681] [<c027f2a8>] (cpu_startup_entry) from [<00208a84>] (0x208a84) [ 2.387453] drm_kms_helper: panic occurred, switching back to text console [ 2.394331] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ~$off # PYBOOT: Exception: panic ======================================================================== Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.743743] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.755676] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.763000] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774475] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.783020] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.794921] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.802246] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.813720] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.821563] HS USB OTG: no transceiver configured [ 3.826263] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.834106] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.842041] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.853942] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.861267] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872741] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.881286] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.893188] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.900512] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.911987] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.919799] HS USB OTG: no transceiver configured [ 3.924530] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.932373] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.940277] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.952209] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.959503] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.970977] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.979492] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.979492] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.979522] musb-hdrc musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.979583] HS USB OTG: no transceiver configured [ 3.979614] musb-hdrc musb-hdrc.26.auto: musb_init_controller failed with status -517 [ 3.979614] platform musb-hdrc.26.auto: Driver musb-hdrc requests probe deferral [ 3.980133] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.26.auto [ 3.980133] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.26.auto) status -22 [ 3.980133] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.980133] musb-ux500 musb-hdrc.26.auto: Error applying setting, reverse things back [ 3.980285] Unable to handle kernel paging request at virtual address 000074af [ 4.072326] pgd = 0a010010 ~$off # PYBOOT: Exception: timeout ======================================================================== Board wandboard-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.065107] ohci-platform: OHCI generic platform driver [ 1.070508] ohci-omap3: OHCI OMAP3 driver [ 1.074677] SPEAr-ohci: OHCI SPEAr driver [ 1.079506] usbcore: registered new interface driver usb-storage [ 1.090515] ci_hdrc ci_hdrc.0: doesn't support gadget [ 1.095596] ci_hdrc ci_hdrc.0: no supported roles [ 1.100423] 2184200.usb supply vbus not found, using dummy regulator [ 1.110528] ci_hdrc ci_hdrc.1: doesn't support gadget [ 1.115609] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.120527] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1 [ 1.132833] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.139032] hub 1-0:1.0: USB hub found [ 1.142856] hub 1-0:1.0: 1 port detected [ 1.147543] mousedev: PS/2 mouse device common for all mice [ 1.155698] i2c /dev entries driver [ 1.160356] usbcore: registered new interface driver uvcvideo [ 1.166133] USB Video Class driver (1.1.1) [ 1.170253] gspca_main: v2.14.0 registered [ 1.176946] sdhci: Secure Digital Host Controller Interface driver [ 1.183155] sdhci: Copyright(c) Pierre Ossman [ 1.188327] Synopsys Designware Multimedia Card Interface Driver [ 1.195258] usbcore: registered new interface driver usbhid [ 1.200854] usbhid: USB HID core driver [ 1.209236] TCP: cubic registered [ 1.212570] NET: Registered protocol family 17 [ 1.217059] can: controller area network core (rev 20120528 abi 9) [ 1.223319] NET: Registered protocol family 29 [ 1.227798] can: raw protocol (rev 20120528) [ 1.232081] can: broadcast manager protocol (rev 20120528 t) [ 1.237769] can: netlink gateway (rev 20130117) max_hops=1 [ 1.243659] Key type dns_resolver registered [ 1.248416] ThumbEE CPU extension supported. [ 1.252715] Registering SWP/SWPB emulation handler [ 1.258678] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.273973] ALSA device list: [ 1.276956] No soundcards found. [ 1.280949] Waiting for root device /dev/mmcblk0p2... [ 60.323437] imx-sdma 20ec000.sdma: firmware not found ~$off # PYBOOT: Exception: timeout

10 years, 6 months

next build: 269 warnings 0 failures (next/next-20140613)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: f9801c5 Add linux-next specific files for 20140613 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140613/ Runtime: 42m 47s Passed: 126 Failed: 0 Warnings: 269 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x256d4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dda8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85ea8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd28): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85968): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d7b8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

← Newer
1
...
15
16
17
18
19
20
21
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014