Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline boot: 33 passed 1 failed (mainline/v3.15-rc8-81-g951e273)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:29.11 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:09.39 arndale exynos_defconfig : passed 1:13.82 bbb omap2plus_defconfig : passed 1:39.85 bbb multi_v7_defconfig : passed 1:11.67 beaver tegra_defconfig : passed 0:59.83 beaver multi_v7_defconfig : passed 1:02.93 capri bcm_defconfig : passed 0:39.55 capri multi_v7_defconfig : passed 0:41.33 cubie sunxi_defconfig : passed 1:17.27 cubie multi_v7_defconfig : passed 1:26.88 cubie2 sunxi_defconfig : passed 1:25.32 cubie2 multi_v7_defconfig : passed 1:28.71 cubie2 multi_lpae_defconfig : passed 1:28.05 dalmore tegra_defconfig : passed 1:24.33 dalmore multi_v7_defconfig : passed 1:32.88 dalmore multi_lpae_defconfig : passed 1:20.10 hummingboard imx_v6_v7_defconfig : passed 1:40.83 hummingboard multi_v7_defconfig : passed 1:24.07 omap5uevm omap2plus_defconfig : passed 1:04.60 omap5uevm multi_v7_defconfig : passed 1:55.33 omap5uevm multi_lpae_defconfig : passed 1:51.99 panda omap2plus_defconfig : warnings 1:36.58 panda multi_v7_defconfig : passed 1:51.68 sama5 sama5_defconfig : passed 1:52.62 seaboard tegra_defconfig : passed 1:03.77 seaboard multi_v7_defconfig : passed 1:09.74 snow exynos_defconfig : passed 1:48.27 snowball u8500_defconfig : passed 3:22.75 snowball multi_v7_defconfig : passed 3:14.47 trimslice tegra_defconfig : passed 1:01.19 trimslice multi_v7_defconfig : passed 1:16.02 wandboard imx_v6_v7_defconfig : passed 1:14.63 wandboard multi_v7_defconfig : passed 1:07.39 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.202684] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.210863] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232906] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.240043] hub 1-0:1.0: USB hub found [ 1.243826] hub 1-0:1.0: 1 port detected [ 1.248149] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.254015] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262129] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282901] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289967] hub 2-0:1.0: USB hub found [ 1.293761] hub 2-0:1.0: 1 port detected [ 1.298082] SPEAr-ehci: EHCI SPEAr driver [ 1.302180] tegra-ehci: Tegra EHCI driver [ 1.306763] usbcore: registered new interface driver usb-storage [ 1.314102] mousedev: PS/2 mouse device common for all mice [ 1.320837] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.330012] i2c /dev entries driver [ 1.335096] usbcore: registered new interface driver uvcvideo [ 1.340815] USB Video Class driver (1.1.1) [ 1.344930] gspca_main: v2.14.0 registered [ 1.351928] orion_wdt: Initial timeout 25 sec [ 1.356988] sdhci: Secure Digital Host Controller Interface driver [ 1.363158] sdhci: Copyright(c) Pierre Ossman [ 1.367986] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374229] usbcore: registered new interface driver usbhid [ 1.379772] usbhid: USB HID core driver [ 1.386486] TCP: cubic registered [ 1.389790] NET: Registered protocol family 17 [ 1.394432] Key type dns_resolver registered [ 1.398861] ThumbEE CPU extension supported. [ 1.403150] Registering SWP/SWPB emulation handler [ 1.407914] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413436] USB Power: 5000 mV [ 1.416919] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-05 20:47:21 UTC (1402001241) [ 1.427373] ALSA device list: [ 1.430325] No soundcards found. [ 1.435033] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440601] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc8-81-g951e273)

by Olof's autobuilder

10 years, 7 months

mainline boot: 33 passed 8 failed (mainline/v3.15-rc8-6451-g046f153)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:26.77 cubie2 multi_v7_defconfig : FAILED 1:38.38 cubie2 multi_lpae_defconfig : FAILED 1:22.31 cubox multi_v7_defconfig : FAILED 1:34.14 omap5uevm omap2plus_defconfig : FAILED 1:47.81 omap5uevm multi_v7_defconfig : FAILED 1:55.34 omap5uevm multi_lpae_defconfig : FAILED 1:44.10 snowball u8500_defconfig : FAILED 1:59.96 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.28 arndale exynos_defconfig : passed 1:14.02 arndale multi_v7_defconfig : passed 1:27.21 arndale multi_lpae_defconfig : passed 1:21.31 bbb omap2plus_defconfig : passed 1:38.28 bbb multi_v7_defconfig : passed 1:19.16 beaver tegra_defconfig : passed 1:16.05 beaver multi_v7_defconfig : passed 1:09.13 capri bcm_defconfig : passed 0:39.52 capri multi_v7_defconfig : passed 0:41.70 cubie sunxi_defconfig : passed 1:30.19 cubie multi_v7_defconfig : passed 1:19.72 dalmore tegra_defconfig : passed 1:26.95 dalmore multi_v7_defconfig : passed 1:28.40 dalmore multi_lpae_defconfig : passed 1:23.51 hummingboard imx_v6_v7_defconfig : passed 1:20.82 hummingboard multi_v7_defconfig : passed 1:19.15 jetson tegra_defconfig : passed 1:06.55 jetson multi_v7_defconfig : passed 0:58.01 jetson multi_lpae_defconfig : passed 1:04.11 panda omap2plus_defconfig : warnings 1:28.66 panda multi_v7_defconfig : passed 1:45.29 sama5 sama5_defconfig : passed 1:57.81 seaboard tegra_defconfig : passed 1:23.41 seaboard multi_v7_defconfig : passed 1:14.01 snow exynos_defconfig : passed 1:18.71 snow multi_v7_defconfig : passed 1:27.72 snow multi_lpae_defconfig : passed 1:20.44 snowball multi_v7_defconfig : passed 3:19.49 trimslice tegra_defconfig : passed 1:01.40 trimslice multi_v7_defconfig : passed 1:12.02 wandboard imx_v6_v7_defconfig : passed 1:10.53 wandboard multi_v7_defconfig : passed 1:11.71 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.265519] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.273023] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278913] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287882] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296885] scsi0 : ahci_platform [ 1.300614] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309313] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314956] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323032] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335521] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342579] hub 1-0:1.0: USB hub found [ 1.346425] hub 1-0:1.0: 1 port detected [ 1.351492] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357160] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365102] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380505] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387546] hub 2-0:1.0: USB hub found [ 1.391388] hub 2-0:1.0: 1 port detected [ 1.396418] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403105] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410988] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475338] hub 3-0:1.0: USB hub found [ 1.479176] hub 3-0:1.0: 1 port detected [ 1.484187] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490909] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498752] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560324] hub 4-0:1.0: USB hub found [ 1.564163] hub 4-0:1.0: 1 port detected [ 1.568836] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.656364] No MAC Management Counters available [ 1.661138] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667767] IP-Config: Failed to open eth0 [ 1.671891] IP-Config: No network devices available [ 1.676811] vcc3v3: disabling [ 1.679776] vcc3v0: disabling [ 1.682871] ALSA device list: [ 1.685853] No soundcards found. [ 1.690014] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.265493] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.272998] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278875] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287842] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296836] scsi0 : ahci_platform [ 1.300550] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309270] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.314916] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323002] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335492] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342536] hub 1-0:1.0: USB hub found [ 1.346395] hub 1-0:1.0: 1 port detected [ 1.351433] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357079] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365037] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380473] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387510] hub 2-0:1.0: USB hub found [ 1.391344] hub 2-0:1.0: 1 port detected [ 1.396359] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403047] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410934] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475377] hub 3-0:1.0: USB hub found [ 1.479230] hub 3-0:1.0: 1 port detected [ 1.484233] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.490949] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498793] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560306] hub 4-0:1.0: USB hub found [ 1.564141] hub 4-0:1.0: 1 port detected [ 1.568822] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.656330] No MAC Management Counters available [ 1.661101] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667708] IP-Config: Failed to open eth0 [ 1.671829] IP-Config: No network devices available [ 1.676744] vcc3v3: disabling [ 1.679708] vcc3v0: disabling [ 1.682799] ALSA device list: [ 1.685775] No soundcards found. [ 1.689913] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.892217] usb1-vbus: 5000 mV [ 0.895650] usb2-vbus: 5000 mV [ 0.965808] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973292] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979181] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988149] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997082] scsi0 : ahci_platform [ 1.000727] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008949] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014543] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022403] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045829] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052795] hub 1-0:1.0: USB hub found [ 1.056646] hub 1-0:1.0: 1 port detected [ 1.061118] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066757] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074597] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095774] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102664] hub 2-0:1.0: USB hub found [ 1.106496] hub 2-0:1.0: 1 port detected [ 1.110936] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117608] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125419] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190584] hub 3-0:1.0: USB hub found [ 1.194371] hub 3-0:1.0: 1 port detected [ 1.198856] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205485] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213348] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280597] hub 4-0:1.0: USB hub found [ 1.284388] hub 4-0:1.0: 1 port detected [ 1.288746] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.375802] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392097] No MAC Management Counters available [ 1.396861] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403454] IP-Config: Failed to open eth0 [ 1.407576] IP-Config: No network devices available [ 1.412472] vcc3v3: disabling [ 1.415437] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.240711] SPEAr-ehci: EHCI SPEAr driver [ 1.244817] tegra-ehci: Tegra EHCI driver [ 1.248952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255135] ohci-pci: OHCI PCI platform driver [ 1.259641] ohci-platform: OHCI generic platform driver [ 1.264955] ohci-omap3: OHCI OMAP3 driver [ 1.269053] SPEAr-ohci: OHCI SPEAr driver [ 1.273796] usbcore: registered new interface driver usb-storage [ 1.281316] mousedev: PS/2 mouse device common for all mice [ 1.288310] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297621] i2c /dev entries driver [ 1.303399] usbcore: registered new interface driver uvcvideo [ 1.309149] USB Video Class driver (1.1.1) [ 1.313242] gspca_main: v2.14.0 registered [ 1.320381] orion_wdt: Initial timeout 25 sec [ 1.325866] sdhci: Secure Digital Host Controller Interface driver [ 1.332028] sdhci: Copyright(c) Pierre Ossman [ 1.337062] Synopsys Designware Multimedia Card Interface Driver [ 1.343433] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349832] usbcore: registered new interface driver usbhid [ 1.355391] usbhid: USB HID core driver [ 1.360362] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368886] TCP: cubic registered [ 1.372237] NET: Registered protocol family 17 [ 1.376690] can: controller area network core (rev 20120528 abi 9) [ 1.382924] NET: Registered protocol family 29 [ 1.387364] can: raw protocol (rev 20120528) [ 1.391628] can: broadcast manager protocol (rev 20120528 t) [ 1.397283] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403151] Key type dns_resolver registered [ 1.407623] ThumbEE CPU extension supported. [ 1.411906] Registering SWP/SWPB emulation handler [ 1.416696] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422288] USB Power: 5000 mV [ 1.425865] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-05 16:31:23 UTC (1401985883) [ 1.436396] ALSA device list: [ 1.439346] No soundcards found. [ 1.443284] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.636860] can: raw protocol (rev 20120528) [ 47.636865] can: broadcast manager protocol (rev 20120528 t) [ 47.636875] can: netlink gateway (rev 20130117) max_hops=1 [ 47.637168] Key type dns_resolver registered [ 47.637258] omap_vc_init_channel: No PMIC info for vdd_core [ 47.637260] omap_vp_init: No PMIC info for vdd_core [ 47.637264] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.637266] omap_vp_init: No PMIC info for vdd_mm [ 47.637270] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.637272] omap_vp_init: No PMIC info for vdd_mpu [ 47.637579] ThumbEE CPU extension supported. [ 47.637595] Registering SWP/SWPB emulation handler [ 47.663348] palmas 0-0048: Irq flag is 0x00000000 [ 47.720609] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.727345] mmc0: new high speed MMC card at address 0001 [ 47.733243] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.738068] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.744326] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.751201] mmcblk0: unknown partition table [ 47.756185] smps123: 600 <--> 1500 mV at 1060 mV [ 47.761121] mmcblk0boot1: unknown partition table [ 47.766947] mmcblk0boot0: unknown partition table [ 47.772781] smps45: 600 <--> 1310 mV at 1030 mV [ 47.779230] smps6: 1200 mV [ 47.783228] smps7: 1800 mV [ 47.787361] smps8: 600 <--> 1310 mV at 1040 mV [ 47.793084] smps9: failed to get the current voltage [ 47.798334] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.810380] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937408] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082417] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088496] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095927] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102784] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110490] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123926] ALSA device list: [ 48.127023] No soundcards found. [ 48.131027] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.081689] can: raw protocol (rev 20120528) [ 48.081695] can: broadcast manager protocol (rev 20120528 t) [ 48.081706] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081998] Key type dns_resolver registered [ 48.082091] omap_vc_init_channel: No PMIC info for vdd_core [ 48.082094] omap_vp_init: No PMIC info for vdd_core [ 48.082097] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.082099] omap_vp_init: No PMIC info for vdd_mm [ 48.082103] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.082105] omap_vp_init: No PMIC info for vdd_mpu [ 48.082420] ThumbEE CPU extension supported. [ 48.082436] Registering SWP/SWPB emulation handler [ 48.097933] palmas 0-0048: Irq flag is 0x00000000 [ 48.165377] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.172116] mmc0: new high speed MMC card at address 0001 [ 48.177981] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.182807] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.189081] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.195930] mmcblk0: unknown partition table [ 48.200946] smps123: 600 <--> 1500 mV at 1060 mV [ 48.205885] mmcblk0boot1: unknown partition table [ 48.211720] mmcblk0boot0: unknown partition table [ 48.217575] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223995] smps6: 1200 mV [ 48.227993] smps7: 1800 mV [ 48.232109] smps8: 600 <--> 1310 mV at 1040 mV [ 48.237844] smps9: failed to get the current voltage [ 48.243088] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.255129] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.382243] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.527251] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.533332] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.540766] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.547618] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.555326] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.568699] ALSA device list: [ 48.571792] No soundcards found. [ 48.575790] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.565870] NET: Registered protocol family 15 [ 2.566053] Key type dns_resolver registered [ 2.566157] omap_vc_init_channel: No PMIC info for vdd_core [ 2.566160] omap_vp_init: No PMIC info for vdd_core [ 2.566169] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.566172] omap_vp_init: No PMIC info for vdd_mm [ 2.566181] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.566184] omap_vp_init: No PMIC info for vdd_mpu [ 2.566734] ThumbEE CPU extension supported. [ 2.566755] Registering SWP/SWPB emulation handler [ 2.566771] SmartReflex Class3 initialized [ 2.595926] palmas 0-0048: Irq flag is 0x00000000 [ 2.674189] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.679380] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.685877] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.694753] mmcblk0: unknown partition table [ 2.700542] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.707568] mmcblk0boot1: unknown partition table [ 2.715972] mmcblk0boot0: unknown partition table [ 2.766211] smps123: 600 <--> 1500 mV at 1060 mV [ 2.773308] smps45: 600 <--> 1310 mV at 1030 mV [ 2.780886] smps6: 1200 mV [ 2.785709] smps7: 1800 mV [ 2.790672] smps8: 600 <--> 1310 mV at 1040 mV [ 2.797218] smps9: failed to get the current voltage [ 2.803167] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.817510] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.826355] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.833494] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.839655] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.848760] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.858094] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.865044] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.873591] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.882237] sr_init: No PMIC hook to init smartreflex [ 2.887702] sr_init: platform driver register failed for SR [ 2.915964] pbias_mmc_omap5: disabling [ 2.921498] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.509185] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.521118] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.528411] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.539916] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.548492] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.560424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.567749] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.579223] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.587036] HS USB OTG: no transceiver configured [ 3.591766] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.599609] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.607543] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.619476] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.626770] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.638275] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.646850] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.658752] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.666076] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.677551] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.685363] HS USB OTG: no transceiver configured [ 3.690093] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.697937] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.705871] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.717773] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.725097] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.736602] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.745178] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.757080] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.764404] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.775878] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.783721] HS USB OTG: no transceiver configured [ 3.788421] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.796295] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.804229] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.816162] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.823455] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.834960] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.843536] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

10 years, 7 months

mainline build: 16 warnings 0 failures (mainline/v3.15-rc8-6451-g046f153)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 046f153 Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-6451-g046f153/ Runtime: 45m 46s Passed: 126 Failed: 0 Warnings: 16 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:211:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25494): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd90): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85a50): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd10): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85410): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d4f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 7 months

mainline boot: 37 passed 4 failed (mainline/v3.15-rc8-4569-g3de0ef8)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:37.17 omap5uevm omap2plus_defconfig : FAILED 1:46.03 omap5uevm multi_v7_defconfig : FAILED 1:54.51 omap5uevm multi_lpae_defconfig : FAILED 1:48.83 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.14 arndale exynos_defconfig : passed 1:15.98 arndale multi_v7_defconfig : passed 1:36.24 arndale multi_lpae_defconfig : passed 1:23.90 bbb omap2plus_defconfig : passed 1:36.03 bbb multi_v7_defconfig : passed 1:32.76 beaver tegra_defconfig : passed 1:08.45 beaver multi_v7_defconfig : passed 1:06.70 capri bcm_defconfig : passed 0:38.69 capri multi_v7_defconfig : passed 0:40.83 cubie sunxi_defconfig : passed 1:18.87 cubie multi_v7_defconfig : passed 1:36.90 cubie2 sunxi_defconfig : passed 1:09.06 cubie2 multi_v7_defconfig : passed 1:31.17 cubie2 multi_lpae_defconfig : passed 1:06.40 dalmore tegra_defconfig : passed 1:24.89 dalmore multi_v7_defconfig : passed 1:25.34 dalmore multi_lpae_defconfig : passed 1:30.12 hummingboard imx_v6_v7_defconfig : passed 1:27.48 hummingboard multi_v7_defconfig : passed 1:24.76 jetson tegra_defconfig : passed 1:02.78 jetson multi_v7_defconfig : passed 1:03.22 jetson multi_lpae_defconfig : passed 1:00.86 panda omap2plus_defconfig : warnings 1:39.74 panda multi_v7_defconfig : passed 2:00.94 sama5 sama5_defconfig : passed 1:54.29 seaboard tegra_defconfig : passed 1:08.95 seaboard multi_v7_defconfig : passed 1:14.54 snow exynos_defconfig : passed 1:29.46 snow multi_v7_defconfig : passed 1:30.25 snow multi_lpae_defconfig : passed 1:33.04 snowball u8500_defconfig : passed 2:14.79 snowball multi_v7_defconfig : passed 3:27.73 trimslice tegra_defconfig : passed 1:21.58 trimslice multi_v7_defconfig : passed 1:01.36 wandboard imx_v6_v7_defconfig : passed 1:13.46 wandboard multi_v7_defconfig : passed 1:20.61 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.228459] SPEAr-ehci: EHCI SPEAr driver [ 1.232562] tegra-ehci: Tegra EHCI driver [ 1.236679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.242854] ohci-pci: OHCI PCI platform driver [ 1.247352] ohci-platform: OHCI generic platform driver [ 1.252654] ohci-omap3: OHCI OMAP3 driver [ 1.256747] SPEAr-ohci: OHCI SPEAr driver [ 1.261452] usbcore: registered new interface driver usb-storage [ 1.268828] mousedev: PS/2 mouse device common for all mice [ 1.275708] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.284959] i2c /dev entries driver [ 1.290911] usbcore: registered new interface driver uvcvideo [ 1.296661] USB Video Class driver (1.1.1) [ 1.300748] gspca_main: v2.14.0 registered [ 1.307811] orion_wdt: Initial timeout 25 sec [ 1.313148] sdhci: Secure Digital Host Controller Interface driver [ 1.319326] sdhci: Copyright(c) Pierre Ossman [ 1.324314] Synopsys Designware Multimedia Card Interface Driver [ 1.330651] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.336996] usbcore: registered new interface driver usbhid [ 1.342557] usbhid: USB HID core driver [ 1.347387] ata1: SATA link down (SStatus 0 SControl F300) [ 1.355404] TCP: cubic registered [ 1.358750] NET: Registered protocol family 17 [ 1.363203] can: controller area network core (rev 20120528 abi 9) [ 1.369436] NET: Registered protocol family 29 [ 1.373867] can: raw protocol (rev 20120528) [ 1.378112] can: broadcast manager protocol (rev 20120528 t) [ 1.383765] can: netlink gateway (rev 20130117) max_hops=1 [ 1.389630] Key type dns_resolver registered [ 1.394081] ThumbEE CPU extension supported. [ 1.398355] Registering SWP/SWPB emulation handler [ 1.403118] PJ4 iWMMXt v2 coprocessor enabled. [ 1.408651] USB Power: 5000 mV [ 1.412152] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 00:30:46 UTC (1401841846) [ 1.422619] ALSA device list: [ 1.425594] No soundcards found. [ 1.429522] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.633787] NET: Registered protocol family 17 [ 47.633799] can: controller area network core (rev 20120528 abi 9) [ 47.633846] NET: Registered protocol family 29 [ 47.633849] can: raw protocol (rev 20120528) [ 47.633852] can: broadcast manager protocol (rev 20120528 t) [ 47.633858] can: netlink gateway (rev 20130117) max_hops=1 [ 47.634148] Key type dns_resolver registered [ 47.634216] omap_vc_init_channel: No PMIC info for vdd_core [ 47.634219] omap_vp_init: No PMIC info for vdd_core [ 47.634222] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.634225] omap_vp_init: No PMIC info for vdd_mm [ 47.634228] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.634230] omap_vp_init: No PMIC info for vdd_mpu [ 47.634530] ThumbEE CPU extension supported. [ 47.634541] Registering SWP/SWPB emulation handler [ 47.727213] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.734113] mmcblk0: unknown partition table [ 47.738797] palmas 0-0048: Irq flag is 0x00000000 [ 47.744704] mmcblk0boot1: unknown partition table [ 47.750480] mmcblk0boot0: unknown partition table [ 47.760242] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.767815] smps123: 600 <--> 1500 mV at 1060 mV [ 47.773935] smps45: 600 <--> 1310 mV at 1030 mV [ 47.780357] smps6: 1200 mV [ 47.784355] smps7: 1800 mV [ 47.788461] smps8: 600 <--> 1310 mV at 1040 mV [ 47.794190] smps9: failed to get the current voltage [ 47.799432] palmas-pmic palmas_pmic.9: failed to register palmas_pmic.9 regulator [ 47.807685] palmas-pmic: probe of palmas_pmic.9 failed with error -22 [ 47.932673] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.077685] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.083760] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.091182] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.098030] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.105724] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.119033] ALSA device list: [ 48.122130] No soundcards found. [ 48.126135] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.086078] can: raw protocol (rev 20120528) [ 48.086081] can: broadcast manager protocol (rev 20120528 t) [ 48.086088] can: netlink gateway (rev 20130117) max_hops=1 [ 48.086371] Key type dns_resolver registered [ 48.086437] omap_vc_init_channel: No PMIC info for vdd_core [ 48.086439] omap_vp_init: No PMIC info for vdd_core [ 48.086443] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.086445] omap_vp_init: No PMIC info for vdd_mm [ 48.086448] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.086450] omap_vp_init: No PMIC info for vdd_mpu [ 48.086747] ThumbEE CPU extension supported. [ 48.086756] Registering SWP/SWPB emulation handler [ 48.157804] palmas 0-0048: Irq flag is 0x00000000 [ 48.164156] mmc0: new high speed MMC card at address 0001 [ 48.170045] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.174875] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.181140] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.187997] mmcblk0: unknown partition table [ 48.193357] mmcblk0boot1: unknown partition table [ 48.198814] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.204644] mmcblk0boot0: unknown partition table [ 48.210834] smps123: 600 <--> 1500 mV at 1060 mV [ 48.216999] smps45: 600 <--> 1310 mV at 1030 mV [ 48.223441] smps6: 1200 mV [ 48.227408] smps7: 1800 mV [ 48.231555] smps8: 600 <--> 1310 mV at 1040 mV [ 48.237306] smps9: failed to get the current voltage [ 48.242550] palmas-pmic palmas_pmic.9: failed to register palmas_pmic.9 regulator [ 48.250788] palmas-pmic: probe of palmas_pmic.9 failed with error -22 [ 48.375505] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.382630] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.388715] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.396135] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.402979] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.410663] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.424013] ALSA device list: [ 48.427120] No soundcards found. [ 48.431117] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout ======================================================================== Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.625639] Key type dns_resolver registered [ 2.625730] omap_vc_init_channel: No PMIC info for vdd_core [ 2.625733] omap_vp_init: No PMIC info for vdd_core [ 2.625742] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.625744] omap_vp_init: No PMIC info for vdd_mm [ 2.625753] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.625755] omap_vp_init: No PMIC info for vdd_mpu [ 2.626307] ThumbEE CPU extension supported. [ 2.626325] Registering SWP/SWPB emulation handler [ 2.626328] SmartReflex Class3 initialized [ 2.683943] mmc0: new high speed MMC card at address 0001 [ 2.685575] palmas 0-0048: Irq flag is 0x00000000 [ 2.696066] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.701082] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.707860] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.717172] mmcblk0: unknown partition table [ 2.723777] mmcblk0boot1: unknown partition table [ 2.730652] mmcblk0boot0: unknown partition table [ 2.736698] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.786540] smps123: 600 <--> 1500 mV at 1060 mV [ 2.793524] smps45: 600 <--> 1310 mV at 1030 mV [ 2.800839] smps6: 1200 mV [ 2.805538] smps7: 1800 mV [ 2.810397] smps8: 600 <--> 1310 mV at 1040 mV [ 2.816920] smps9: failed to get the current voltage [ 2.822852] palmas-pmic palmas_pmic.9: failed to register palmas_pmic.9 regulator [ 2.833489] palmas-pmic: probe of palmas_pmic.9 failed with error -22 [ 2.840394] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.847386] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.853554] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.862637] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.871980] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.878930] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.887507] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.896210] sr_init: No PMIC hook to init smartreflex [ 2.901664] sr_init: platform driver register failed for SR [ 2.929862] pbias_mmc_omap5: disabling [ 2.935342] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next boot: 35 passed 6 failed (next/next-20140605)

by Olof's autobooter

Failed boards: omap5uevm omap2plus_defconfig : FAILED 1:46.01 omap5uevm multi_v7_defconfig : FAILED 1:49.17 omap5uevm multi_lpae_defconfig : FAILED 1:47.81 snow multi_v7_defconfig : FAILED 1:11.23 snow multi_lpae_defconfig : FAILED 1:11.94 snowball u8500_defconfig : FAILED 1:56.50 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:14.45 arndale exynos_defconfig : passed 1:12.07 arndale multi_v7_defconfig : passed 1:37.63 arndale multi_lpae_defconfig : passed 1:21.43 bbb omap2plus_defconfig : passed 1:30.93 bbb multi_v7_defconfig : passed 1:27.93 beaver tegra_defconfig : passed 1:05.32 beaver multi_v7_defconfig : passed 1:05.89 capri bcm_defconfig : passed 0:39.29 capri multi_v7_defconfig : passed 0:39.49 cubie sunxi_defconfig : passed 1:17.37 cubie multi_v7_defconfig : passed 1:25.01 cubie2 sunxi_defconfig : passed 1:15.55 cubie2 multi_v7_defconfig : passed 1:31.82 cubie2 multi_lpae_defconfig : passed 1:22.13 cubox multi_v7_defconfig : passed 1:01.85 dalmore tegra_defconfig : passed 1:25.98 dalmore multi_v7_defconfig : passed 1:27.53 dalmore multi_lpae_defconfig : passed 1:24.73 hummingboard imx_v6_v7_defconfig : passed 1:28.05 hummingboard multi_v7_defconfig : passed 1:13.52 jetson tegra_defconfig : passed 1:01.17 jetson multi_v7_defconfig : passed 0:54.51 jetson multi_lpae_defconfig : passed 1:10.19 panda omap2plus_defconfig : warnings 1:30.57 panda multi_v7_defconfig : warnings 1:42.46 sama5 sama5_defconfig : warnings 1:55.63 seaboard tegra_defconfig : passed 1:03.61 seaboard multi_v7_defconfig : passed 1:11.37 snow exynos_defconfig : passed 1:28.67 snowball multi_v7_defconfig : passed 2:33.25 trimslice tegra_defconfig : passed 1:15.16 trimslice multi_v7_defconfig : passed 1:04.14 wandboard imx_v6_v7_defconfig : passed 1:01.87 wandboard multi_v7_defconfig : passed 1:13.72 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.087777] NET: Registered protocol family 17 [ 47.087805] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.097311] mmcblk0: unknown partition table [ 47.098096] mmcblk0boot1: unknown partition table [ 47.098861] mmcblk0boot0: unknown partition table [ 47.113180] can: controller area network core (rev 20120528 abi 9) [ 47.119678] NET: Registered protocol family 29 [ 47.124328] can: raw protocol (rev 20120528) [ 47.128797] can: broadcast manager protocol (rev 20120528 t) [ 47.134719] can: netlink gateway (rev 20130117) max_hops=1 [ 47.140728] Key type dns_resolver registered [ 47.145254] omap_vc_init_channel: No PMIC info for vdd_core [ 47.151080] omap_vp_init: No PMIC info for vdd_core [ 47.156177] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.161823] omap_vp_init: No PMIC info for vdd_mm [ 47.166744] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.172472] omap_vp_init: No PMIC info for vdd_mpu [ 47.177764] ThumbEE CPU extension supported. [ 47.182244] Registering SWP/SWPB emulation handler [ 47.188447] palmas 0-0048: Irq flag is 0x00000000 [ 47.196194] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.203782] smps123: 600 <--> 1500 mV at 1060 mV [ 47.209913] smps45: 600 <--> 1310 mV at 1030 mV [ 47.216363] smps6: 1200 mV [ 47.220361] smps7: 1800 mV [ 47.224492] smps8: 600 <--> 1310 mV at 1040 mV [ 47.230217] smps9: failed to get the current voltage [ 47.235462] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.247511] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371952] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516959] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.523051] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530501] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537363] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.545077] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558457] ALSA device list: [ 47.561551] No soundcards found. [ 47.565553] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 47.537490] NET: Registered protocol family 17 [ 47.537517] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.547042] mmcblk0: unknown partition table [ 47.547821] mmcblk0boot1: unknown partition table [ 47.548571] mmcblk0boot0: unknown partition table [ 47.562897] can: controller area network core (rev 20120528 abi 9) [ 47.569402] NET: Registered protocol family 29 [ 47.574047] can: raw protocol (rev 20120528) [ 47.578509] can: broadcast manager protocol (rev 20120528 t) [ 47.584428] can: netlink gateway (rev 20130117) max_hops=1 [ 47.590451] Key type dns_resolver registered [ 47.594980] omap_vc_init_channel: No PMIC info for vdd_core [ 47.600799] omap_vp_init: No PMIC info for vdd_core [ 47.605901] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.611543] omap_vp_init: No PMIC info for vdd_mm [ 47.616447] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.622185] omap_vp_init: No PMIC info for vdd_mpu [ 47.627474] ThumbEE CPU extension supported. [ 47.631945] Registering SWP/SWPB emulation handler [ 47.638155] palmas 0-0048: Irq flag is 0x00000000 [ 47.645846] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.653394] smps123: 600 <--> 1500 mV at 1060 mV [ 47.659528] smps45: 600 <--> 1310 mV at 1030 mV [ 47.665948] smps6: 1200 mV [ 47.669915] smps7: 1800 mV [ 47.674023] smps8: 600 <--> 1310 mV at 1040 mV [ 47.679769] smps9: failed to get the current voltage [ 47.685017] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.697078] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.821672] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.966681] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.972759] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.980196] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.987047] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.994769] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.008162] ALSA device list: [ 48.011257] No soundcards found. [ 48.015257] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 1.950708] Key type dns_resolver registered [ 1.950806] omap_vc_init_channel: No PMIC info for vdd_core [ 1.950809] omap_vp_init: No PMIC info for vdd_core [ 1.950819] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.950822] omap_vp_init: No PMIC info for vdd_mm [ 1.950831] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.950834] omap_vp_init: No PMIC info for vdd_mpu [ 1.951389] ThumbEE CPU extension supported. [ 1.951411] Registering SWP/SWPB emulation handler [ 1.951423] SmartReflex Class3 initialized [ 2.015758] palmas 0-0048: Irq flag is 0x00000000 [ 2.033323] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.039721] mmc0: new high speed MMC card at address 0001 [ 2.047485] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.052770] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.059236] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.068502] mmcblk0: unknown partition table [ 2.075108] mmcblk0boot1: unknown partition table [ 2.081764] mmcblk0boot0: unknown partition table [ 2.103059] smps123: 600 <--> 1500 mV at 1060 mV [ 2.110070] smps45: 600 <--> 1310 mV at 1030 mV [ 2.117447] smps6: 1200 mV [ 2.122238] smps7: 1800 mV [ 2.127130] smps8: 600 <--> 1310 mV at 1040 mV [ 2.133628] smps9: failed to get the current voltage [ 2.139637] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153974] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.162817] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.170737] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.176803] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.185947] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.195348] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.202318] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.210787] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.219455] sr_init: No PMIC hook to init smartreflex [ 2.224911] sr_init: platform driver register failed for SR [ 2.253090] pbias_mmc_omap5: disabling [ 2.258586] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snow-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2889.881378] No ATAGs? [ 2889.881396] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2889.881402] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2889.881497] EXYNOS5250 PMU Initialize [ 2889.882705] Serial: AMBA PL011 UART driver [ 2920.594305] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot [ 2920.594317] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5 [ 2920.594610] vbat-supply: no parameters [ 2920.594752] P5.0V_USB3CON: 5000 mV [ 2920.595885] vgaarb: loaded [ 2920.596158] SCSI subsystem initialized [ 2920.596239] libata version 3.00 loaded. [ 2920.596385] usbcore: registered new interface driver usbfs [ 2920.596414] usbcore: registered new interface driver hub [ 2920.596466] usbcore: registered new device driver usb [ 2920.596884] Linux video capture interface: v2.00 [ 2920.596908] pps_core: LinuxPPS API ver. 1 registered [ 2920.596912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti(a)linux.it> [ 2920.596926] PTP clock support registered [ 2920.596969] EDAC MC: Ver: 3.0.0 [ 2920.597324] Advanced Linux Sound Architecture Driver Initialized. [ 2920.597781] Switched to clocksource arch_sys_counter [ 2920.602026] NET: Registered protocol family 2 [ 2920.602272] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 2920.602309] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2920.602382] TCP: Hash tables configured (established 8192 bind 8192) [ 2920.602409] TCP: reno registered [ 2920.602416] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602433] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602512] NET: Registered protocol family 1 [ 2920.602652] RPC: Registered named UNIX socket transport module. [ 2920.602656] RPC: Registered udp transport module. [ 2920.602660] RPC: Registered tcp transport module. [ 2920.602664] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602674] PCI: CLS 0 bytes, default 64 [ 2920.603011] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603692] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.609163] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609521] NFS: Regist~$off # PYBOOT: Exception: timeout Board snow-multi_v7_defconfig failure log: ------------------------------------------------- [ 2920.602341] TCP: reno registered [ 2920.602348] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602365] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 2920.602446] NET: Registered protocol family 1 [ 2920.602578] RPC: Registered named UNIX socket transport module. [ 2920.602583] RPC: Registered udp transport module. [ 2920.602587] RPC: Registered tcp transport module. [ 2920.602590] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2920.602601] PCI: CLS 0 bytes, default 64 [ 2920.602930] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 2920.603601] futex hash table entries: 512 (order: 3, 32768 bytes) [ 2920.608863] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2920.609215] NFS: Registering the id_resolver key type [ 2920.609233] Key type id_resolver registered [ 2920.609237] Key type id_legacy registered [ 2920.609264] msgmni has been set to 1464 [ 2920.609498] bounce: pool size: 64 pages [ 2920.609597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2920.609607] io scheduler noop registered [ 2920.609615] io scheduler deadline registered [ 2920.609699] io scheduler cfq registered (default) [ 2920.612340] backlight supply power not found, using dummy regulator [ 2920.612392] pwm-backlight backlight: unable to request PWM, trying legacy API [ 2920.612398] pwm-backlight backlight: unable to request legacy PWM [ 2920.612435] platform backlight: Driver pwm-backlight requests probe deferral [ 2920.612623] simple-framebuffer bfc00000.framebuffer: framebuffer at 0xbfc00000, 0x202000 bytes, mapped to 0xf0400000 [ 2920.612629] simple-framebuffer bfc00000.framebuffer: format=r5g6b5, mode=1366x768x16, linelength=2732 [ 2920.615424] Console: switching to colour frame buffer device 170x48 [ 2920.618013] simple-framebuffer bfc00000.framebuffer: fb0: simplefb registered! [ 2920.619790] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.619797] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621093] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621100] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2920.621477] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621484] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.621854] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-2364208 [ 2920.621861] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2920.647009] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2920.647912] 12c00000.serial: ttySA~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.539154] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.551086] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.558380] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.569854] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.578430] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.590362] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.597686] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.609161] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.616973] HS USB OTG: no transceiver configured [ 3.621704] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.629547] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.637481] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.649414] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.656738] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.668212] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.676788] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.688720] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.696044] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.707519] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.715332] HS USB OTG: no transceiver configured [ 3.720031] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.727905] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.735839] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.747741] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.755065] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.766571] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.775146] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.787078] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.794403] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.805877] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.813690] HS USB OTG: no transceiver configured [ 3.818389] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.826263] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.834197] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.846130] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.853424] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.864929] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.873504] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto ~$off # PYBOOT: Exception: timeout

10 years, 7 months

next build: 467 warnings 0 failures (next/next-20140605)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 1d08c85 Add linux-next specific files for 20140605 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20140605/ Runtime: 42m 21s Passed: 126 Failed: 0 Warnings: 467 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/mmc/host/sunxi-mmc.c:297:35: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 drivers/staging/imx-drm/imx-tve.c:252:6: warning: unused variable 'ret' [-Wunused-variable] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 1 include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] 2 arch/arm/mm/cache-l2x0.c:167:13: warning: 'l2x0_cache_sync' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:184:13: warning: 'l2x0_flush_all' defined but not used [-Wunused-function] 2 arch/arm/mm/cache-l2x0.c:194:13: warning: 'l2x0_disable' defined but not used [-Wunused-function] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:208:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] 22 include/linux/ftrace.h:623:60: warning: unsupported argument to '__builtin_return_address' [enabled by default] 97 include/linux/bitops.h:48) [-Wdeprecated-declarations] 100 include/linux/bitops.h:40) [-Wdeprecated-declarations] 113 fs/direct-io.c:1011:12: warning: 'from' may be used uninitialized in this function [-Wmaybe-uninitialized] 113 fs/direct-io.c:1011:12: warning: 'to' may be used uninitialized in this function [-Wmaybe-uninitialized] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4ae8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x3640): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25768): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3df30): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x75c0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x860b0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3deac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x757c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85aac): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x727c): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x36c8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d8bc): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 7 months

mainline build: 16 warnings 0 failures (mainline/v3.15-rc8-6406-g00170fd)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 00170fd Merge branch 'akpm' (patchbomb from Andrew) into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-6406-g00170fd/ Runtime: 46m 3s Passed: 126 Failed: 0 Warnings: 16 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:211:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x25494): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd90): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x85a50): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd10): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85410): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d4f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 7 months

mainline boot: 61 pass, 2 fail (v3.15-rc8-6406-g00170fd)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-6406-g00170fd Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.4 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.3 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.4 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 42.1 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 36.1 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 48.2 sec: PASS legacy,3530beagle 0 min 22.8 sec: PASS (Warnings: 1) omap4-panda 0 min 48.8 sec: PASS omap3-overo-tobi 0 min 23.4 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 22.2 sec: PASS omap5-uevm 0 min 56.2 sec: PASS (Warnings: 6) omap3-n900 0 min 17.7 sec: PASS legacy,n900 0 min 17.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 52.5 sec: PASS legacy,3730storm 0 min 20.3 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.4 sec: PASS am335x-boneblack 0 min 22.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.5 sec: PASS exynos5410-smdk5410 0 min 28.9 sec: PASS am335x-bone 0 min 23.6 sec: PASS tegra124-jetson-tk1 0 min 17.9 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 50.1 sec: PASS imx6q-wandboard 0 min 14.0 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 11.5 sec: FAIL tegra30-beaver 0 min 19.4 sec: PASS omap3-n900 0 min 16.3 sec: PASS qcom-apq8074-dragonboard 0 min 20.2 sec: PASS bcm28155-ap 0 min 27.2 sec: PASS omap3-overo-tobi 0 min 22.3 sec: PASS omap3-overo-storm-tobi 0 min 24.5 sec: PASS omap3-beagle-xm 0 min 47.8 sec: PASS exynos5420-arndale-octa 0 min 40.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 1 min 38.8 sec: PASS (Warnings: 6) omap4-panda-es 0 min 49.2 sec: PASS exynos5250-arndale 0 min 31.1 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.6 sec: PASS sun4i-a10-cubieboard 0 min 16.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.5 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.7 sec: PASS exynos5250-arndale 0 min 30.2 sec: PASS exynos5410-smdk5410 0 min 27.4 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.8 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 1 min 53.1 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS Console logs for failures ========================= arm-multi_v7_defconfig ---------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 48.608703] List of all partitions: [ 48.612243] b300 7634944 mmcblk0 driver: mmcblk [ 48.617614] b301 3968 mmcblk0p1 00000000-01 [ 48.622955] b302 53248 mmcblk0p2 00000000-02 [ 48.628295] b303 454656 mmcblk0p3 00000000-03 [ 48.633636] b330 128 mmcblk0rpmb (driver?) [ 48.638854] b320 2048 mmcblk0boot1 (driver?) [ 48.644165] b310 2048 mmcblk0boot0 (driver?) [ 48.649475] No filesystem could mount root, tried: ext4 [ 48.654815] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) [ 48.663238] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-06406-g00170fd #1 [ 48.670837] [<c0215934>] (unwind_backtrace) from [<c0211570>] (show_stack+0x10/0x14) [ 48.678588] [<c0211570>] (show_stack) from [<c07f6674>] (dump_stack+0x78/0x94) [ 48.685821] [<c07f6674>] (dump_stack) from [<c07f4148>] (panic+0x90/0x208) [ 48.692687] [<c07f4148>] (panic) from [<c0ac10d4>] (mount_block_root+0x1f4/0x230) [ 48.700164] [<c0ac10d4>] (mount_block_root) from [<c0ac1204>] (mount_root+0xf4/0x114) [ 48.707977] [<c0ac1204>] (mount_root) from [<c0ac1350>] (prepare_namespace+0x12c/0x190) [ 48.716003] [<c0ac1350>] (prepare_namespace) from [<c0ac0d00>] (kernel_init_freeable+0x184/0x1cc) [ 48.724884] [<c0ac0d00>] (kernel_init_freeable) from [<c07f1d7c>] (kernel_init+0x8/0xec) [ 48.732971] [<c07f1d7c>] (kernel_init) from [<c020e8f8>] (ret_from_fork+0x14/0x3c) [ 48.740539] CPU0: stopping [ 48.743225] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-06406-g00170fd #1 [ 48.750793] [<c0215934>] (unwind_backtrace) from [<c0211570>] (show_stack+0x10/0x14) [ 48.758544] [<c0211570>] (show_stack) from [<c07f6674>] (dump_stack+0x78/0x94) [ 48.765777] [<c07f6674>] (dump_stack) from [<c02141bc>] (handle_IPI+0x138/0x174) [ 48.773162] [<c02141bc>] (handle_IPI) from [<c0208898>] (gic_handle_irq+0x64/0x6c) [ 48.780731] [<c0208898>] (gic_handle_irq) from [<c0212080>] (__irq_svc+0x40/0x50) [ 48.788208] Exception stack(0xc0b63f58 to 0xc0b63fa0) [ 48.793243] 3f40: ffffffed 00000000 [ 48.801422] 3f60: ffffffed c021ea00 c0b62000 c0b6a4c4 c0b6a458 00000000 00000000 00000000 [ 48.809570] 3f80: c0b5fda0 c0b62000 00000000 c0b63fa0 c020f438 c020f43c 60000013 ffffffff [ 48.817749] [<c0212080>] (__irq_svc) from [<c020f43c>] (arch_cpu_idle+0x30/0x3c) [ 48.825164] [<c020f43c>] (arch_cpu_idle) from [<c027afb8>] (cpu_startup_entry+0x1d4/0x214) [ 48.833404] [<c027afb8>] (cpu_startup_entry) from [<c0ac0b20>] (start_kernel+0x2e8/0x344) [ 48.841583] [<c0ac0b20>] (start_kernel) from [<00208074>] (0x208074) [ 48.847930] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 71.46 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.412078] platform musb-hdrc.20.auto: Driver musb-hdrc requests probe deferral [ 3.420013] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.20.auto [ 3.431915] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.20.auto) status -22 [ 3.439239] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.450714] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.459289] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.471221] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.478515] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.490020] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.497833] HS USB OTG: no transceiver configured [ 3.502563] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.510406] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.518341] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.530273] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.537567] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.549072] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.557617] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.569549] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.576843] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.588348] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.596160] HS USB OTG: no transceiver configured [ 3.600891] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.608734] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.616668] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.628601] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.635925] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.647399] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.655914] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.667846] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.675170] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.686676] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.694488] HS USB OTG: no transceiver configured [ 3.699188] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.707031] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.714996] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.726898] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 113.10 seconds. # PYBOOT: Result: FAIL

10 years, 7 months

mainline boot: 33 passed 7 failed (mainline/v3.15-rc8-6406-g00170fd)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:23.29 cubie2 multi_v7_defconfig : FAILED 1:41.16 cubie2 multi_lpae_defconfig : FAILED 1:23.23 cubox multi_v7_defconfig : FAILED 1:33.25 omap5uevm omap2plus_defconfig : FAILED 1:48.53 omap5uevm multi_lpae_defconfig : FAILED 1:44.90 snowball u8500_defconfig : FAILED 1:56.71 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.64 arndale exynos_defconfig : passed 1:13.72 arndale multi_v7_defconfig : passed 1:32.84 arndale multi_lpae_defconfig : passed 1:21.43 bbb omap2plus_defconfig : passed 1:35.66 bbb multi_v7_defconfig : passed 1:30.85 beaver tegra_defconfig : passed 0:57.50 beaver multi_v7_defconfig : passed 0:58.01 capri bcm_defconfig : passed 0:39.75 capri multi_v7_defconfig : passed 0:40.93 cubie sunxi_defconfig : passed 1:22.09 cubie multi_v7_defconfig : passed 1:33.83 dalmore tegra_defconfig : passed 1:26.16 dalmore multi_v7_defconfig : passed 1:24.36 dalmore multi_lpae_defconfig : passed 1:26.92 hummingboard imx_v6_v7_defconfig : passed 1:27.06 hummingboard multi_v7_defconfig : passed 1:12.90 jetson tegra_defconfig : passed 1:08.00 jetson multi_v7_defconfig : passed 0:58.47 jetson multi_lpae_defconfig : passed 0:58.57 panda omap2plus_defconfig : warnings 1:28.15 panda multi_v7_defconfig : passed 1:43.81 sama5 sama5_defconfig : passed 1:52.72 seaboard tegra_defconfig : passed 1:16.88 seaboard multi_v7_defconfig : passed 1:17.38 snow exynos_defconfig : passed 1:27.86 snow multi_v7_defconfig : passed 1:29.25 snow multi_lpae_defconfig : passed 1:30.01 snowball multi_v7_defconfig : passed 3:22.11 trimslice tegra_defconfig : passed 1:05.56 trimslice multi_v7_defconfig : passed 1:24.92 wandboard imx_v6_v7_defconfig : passed 1:12.90 wandboard multi_v7_defconfig : passed 1:15.95 Offline boards: omap5uevm multi_v7_defconfig : OFFLINE 2:13.51 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.265613] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.273118] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.279008] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287977] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296970] scsi0 : ahci_platform [ 1.300692] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309396] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.315040] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323118] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335615] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342684] hub 1-0:1.0: USB hub found [ 1.346537] hub 1-0:1.0: 1 port detected [ 1.351598] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357272] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365217] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380597] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387628] hub 2-0:1.0: USB hub found [ 1.391472] hub 2-0:1.0: 1 port detected [ 1.396503] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403186] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.411070] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475429] hub 3-0:1.0: USB hub found [ 1.479277] hub 3-0:1.0: 1 port detected [ 1.484282] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.491003] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498846] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560424] hub 4-0:1.0: USB hub found [ 1.564263] hub 4-0:1.0: 1 port detected [ 1.568945] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.656461] No MAC Management Counters available [ 1.661240] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667868] IP-Config: Failed to open eth0 [ 1.671991] IP-Config: No network devices available [ 1.676905] vcc3v3: disabling [ 1.679870] vcc3v0: disabling [ 1.682963] ALSA device list: [ 1.685940] No soundcards found. [ 1.690098] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.273077] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.278961] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.287930] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.296921] scsi0 : ahci_platform [ 1.300648] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.309367] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.315014] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.323092] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.335570] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.342610] hub 1-0:1.0: USB hub found [ 1.346469] hub 1-0:1.0: 1 port detected [ 1.351530] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.357199] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.365141] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.380554] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.387582] hub 2-0:1.0: USB hub found [ 1.391416] hub 2-0:1.0: 1 port detected [ 1.396429] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.403115] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.410999] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.475446] hub 3-0:1.0: USB hub found [ 1.479298] hub 3-0:1.0: 1 port detected [ 1.484300] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.491021] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.498860] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.560379] hub 4-0:1.0: USB hub found [ 1.564218] hub 4-0:1.0: 1 port detected [ 1.568908] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.656416] No MAC Management Counters available [ 1.661187] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.667799] IP-Config: Failed to open eth0 [ 1.671922] IP-Config: No network devices available [ 1.676838] vcc3v3: disabling [ 1.679803] vcc3v0: disabling [ 1.682898] ALSA device list: [ 1.685875] No soundcards found. [ 1.690011] ata1: SATA link down (SStatus 0 SControl 300) node: cubie2 status: on ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.892409] usb1-vbus: 5000 mV [ 0.895899] usb2-vbus: 5000 mV [ 0.965847] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.973334] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.979223] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.988192] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.997096] scsi0 : ahci_platform [ 1.000746] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008963] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.014562] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.022421] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045871] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052838] hub 1-0:1.0: USB hub found [ 1.056681] hub 1-0:1.0: 1 port detected [ 1.061158] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066797] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.074647] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095812] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102681] hub 2-0:1.0: USB hub found [ 1.106506] hub 2-0:1.0: 1 port detected [ 1.110944] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.117613] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.125427] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.190625] hub 3-0:1.0: USB hub found [ 1.194410] hub 3-0:1.0: 1 port detected [ 1.198902] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.205532] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.213390] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.280615] hub 4-0:1.0: USB hub found [ 1.284408] hub 4-0:1.0: 1 port detected [ 1.288768] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.375838] ata1: SATA link down (SStatus 0 SControl 300) [ 1.392141] No MAC Management Counters available [ 1.396906] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.403496] IP-Config: Failed to open eth0 [ 1.407624] IP-Config: No network devices available [ 1.412522] vcc3v3: disabling [ 1.415487] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.244792] tegra-ehci: Tegra EHCI driver [ 1.248923] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255104] ohci-pci: OHCI PCI platform driver [ 1.259611] ohci-platform: OHCI generic platform driver [ 1.264925] ohci-omap3: OHCI OMAP3 driver [ 1.269023] SPEAr-ohci: OHCI SPEAr driver [ 1.273766] usbcore: registered new interface driver usb-storage [ 1.281293] mousedev: PS/2 mouse device common for all mice [ 1.288297] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.297609] i2c /dev entries driver [ 1.303272] usbcore: registered new interface driver uvcvideo [ 1.309024] USB Video Class driver (1.1.1) [ 1.313125] gspca_main: v2.14.0 registered [ 1.320266] orion_wdt: Initial timeout 25 sec [ 1.325749] sdhci: Secure Digital Host Controller Interface driver [ 1.331910] sdhci: Copyright(c) Pierre Ossman [ 1.336944] Synopsys Designware Multimedia Card Interface Driver [ 1.343313] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.349717] usbcore: registered new interface driver usbhid [ 1.355274] usbhid: USB HID core driver [ 1.360250] ata1: SATA link down (SStatus 0 SControl F300) [ 1.368829] TCP: cubic registered [ 1.372183] NET: Registered protocol family 17 [ 1.376643] can: controller area network core (rev 20120528 abi 9) [ 1.382879] NET: Regisnode: cubox status: on tered protocol family 29 [ 1.387315] can: raw protocol (rev 20120528) [ 1.391579] can: broadcast manager protocol (rev 20120528 t) [ 1.397227] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403101] Key type dns_resolver registered [ 1.407576] ThumbEE CPU extension supported. [ 1.411859] Registering SWP/SWPB emulation handler [ 1.416648] PJ4 iWMMXt v2 coprocessor enabled. [ 1.422243] USB Power: 5000 mV [ 1.425821] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-05 00:57:08 UTC (1401929828) [ 1.436360] ALSA device list: [ 1.439316] No soundcards found. [ 1.443250] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.636859] can: raw protocol (rev 20120528) [ 47.636865] can: broadcast manager protocol (rev 20120528 t) [ 47.636874] can: netlink gateway (rev 20130117) max_hops=1 [ 47.637175] Key type dns_resolver registered [ 47.637266] omap_vc_init_channel: No PMIC info for vdd_core [ 47.637269] omap_vp_init: No PMIC info for vdd_core [ 47.637272] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.637274] omap_vp_init: No PMIC info for vdd_mm [ 47.637278] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.637279] omap_vp_init: No PMIC info for vdd_mpu [ 47.637588] ThumbEE CPU extension supported. [ 47.637605] Registering SWP/SWPB emulation handler [ 47.663350] palmas 0-0048: Irq flag is 0x00000000 [ 47.720565] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.727310] mmc0: new high speed MMC card at address 0001 [ 47.733187] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.738015] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.744281] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.751155] mmcblk0: unknown partition table [ 47.756010] smps123: 600 <--> 1500 mV at 1060 mV [ 47.761476] mmcblk0boot1: unknown partition table [ 47.767247] mmcblk0boot0: unknown partition table [ 47.772606] smps45: 600 <--> 1310 mV at 1030 mV [ 47.782059] smps6: 1200 mV [ 47.786098] smps7: 1800 mV [ 47.791275] smps8: 600 <--> 1310 mV at 1040 mV [ 47.797002] smps9: failed to get the current voltage [ 47.802250] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.814294] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.942383] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.087394] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.093484] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.100923] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.107781] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.115490] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.128930] ALSA device list: [ 48.132032] No soundcards found. [ 48.136030] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.576522] TCP: cubic registered [ 2.576529] Initializing XFRM netlink socket [ 2.576584] NET: Registered protocol family 17 [ 2.576632] NET: Registered protocol family 15 [ 2.576820] Key type dns_resolver registered [ 2.576940] omap_vc_init_channel: No PMIC info for vdd_core [ 2.576943] omap_vp_init: No PMIC info for vdd_core [ 2.576953] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.576956] omap_vp_init: No PMIC info for vdd_mm [ 2.576965] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.576968] omap_vp_init: No PMIC info for vdd_mpu [ 2.577530] ThumbEE CPU extension supported. [ 2.577552] Registering SWP/SWPB emulation handler [ 2.577565] SmartReflex Class3 initialized [ 2.606610] palmas 0-0048: Irq flag is 0x00000000 [ 2.685226] mmcblk0: unknown partition table [ 2.692047] mmcblk0boot1: unknown partition table [ 2.698889] mmcblk0boot0: unknown partition table [ 2.704290] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.756656] smps123: 600 <--> 1500 mV at 1060 mV [ 2.763641] smps45: 600 <--> 1310 mV at 1030 mV [ 2.771009] smps6: 1200 mV [ 2.775710] smps7: 1800 mV [ 2.780549] smps8: 600 <--> 1310 mV at 1040 mV [ 2.787053] smps9: failed to get the current voltage [ 2.792965] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.807265] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.816099] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.823237] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.829288] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.838417] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.847780] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.854727] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.863251] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.871889] sr_init: No PMIC hook to init smartreflex [ 2.877426] sr_init: platform driver register failed for SR [ 2.905619] pbias_mmc_omap5: disabling [ 2.911204] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.597686] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605621] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617553] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.624847] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636352] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.644836] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656768] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.664093] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675567] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683380] HS USB OTG: no transceiver configured [ 3.688110] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.695953] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.703887] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.715789] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.723114] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734588] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.743103] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.755035] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762359] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773834] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781646] HS USB OTG: no transceiver configured [ 3.786346] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.794219] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.802124] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.814056] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821380] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.832855] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841400] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.853332] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860626] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872131] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.879913] HS USB OTG: no transceiver configured [ 3.884643] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892486] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900390] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.912322] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919647] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.931121] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

10 years, 7 months

← Newer
1
...
28
29
30
31
32
33
34
...
39
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014