Kernel-build-reports June 2014

kernel-build-reports@lists.linaro.org

17 participants
388 discussions

mainline boot: 43 pass, 20 fail (v3.15-rc8-6055-gf1a7cd0)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-6055-gf1a7cd0 Failed boot tests (console logs at the end) =========================================== legacy,dm365evm: FAIL: arm-davinci_all_defconfig da850-evm: FAIL: arm-davinci_all_defconfig armada-xp-openblocks-ax3-4: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y imx6dl-wandboard,wand-solo: FAIL: arm-multi_v7_defconfig am335x-boneblack: FAIL: arm-multi_v7_defconfig sun4i-a10-cubieboard: FAIL: arm-multi_v7_defconfig exynos5410-smdk5410: FAIL: arm-multi_v7_defconfig imx6q-wandboard: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-multi_v7_defconfig bcm28155-ap: FAIL: arm-multi_v7_defconfig omap3-beagle-xm: FAIL: arm-multi_v7_defconfig exynos5420-arndale-octa: FAIL: arm-multi_v7_defconfig omap5-uevm: FAIL: arm-multi_v7_defconfig exynos5250-arndale: FAIL: arm-multi_v7_defconfig imx6dl-wandboard,wand-dual: FAIL: arm-imx_v6_v7_defconfig imx6dl-wandboard,wand-solo: FAIL: arm-imx_v6_v7_defconfig imx6q-wandboard: FAIL: arm-imx_v6_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 0.1 sec: FAIL da850-evm 0 min 0.1 sec: FAIL arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.3 sec: PASS tegra30-beaver 0 min 34.7 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.6 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.4 sec: PASS omap5-uevm 1 min 38.8 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 13.5 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 0.2 sec: FAIL armada-370-mirabox 0 min 0.2 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 40.3 sec: PASS am335x-boneblack 0 min 22.2 sec: PASS omap3-beagle-xm 0 min 47.2 sec: PASS legacy,3530beagle 0 min 23.4 sec: PASS (Warnings: 1) omap4-panda 0 min 49.1 sec: PASS omap3-overo-tobi 0 min 25.9 sec: PASS am335x-bone 0 min 28.9 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 59.0 sec: PASS (Warnings: 6) omap3-n900 0 min 16.6 sec: PASS legacy,n900 0 min 16.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.4 sec: PASS legacy,3730storm 0 min 22.4 sec: PASS legacy,3530overo 0 min 21.0 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 0.2 sec: FAIL am335x-boneblack 0 min 0.1 sec: FAIL sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 0.2 sec: FAIL exynos5410-smdk5410 0 min 0.1 sec: FAIL am335x-bone 0 min 29.6 sec: PASS tegra124-jetson-tk1 0 min 37.7 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 51.5 sec: PASS imx6q-wandboard 0 min 0.1 sec: FAIL imx6dl-wandboard,wand-dual 0 min 0.1 sec: FAIL ste-snowball 0 min 0.2 sec: FAIL tegra30-beaver 0 min 31.0 sec: PASS omap3-n900 0 min 15.4 sec: PASS qcom-apq8074-dragonboard 0 min 17.2 sec: PASS bcm28155-ap 0 min 0.1 sec: FAIL omap3-overo-tobi 0 min 31.3 sec: PASS omap3-overo-storm-tobi 0 min 21.0 sec: PASS omap3-beagle-xm 0 min 0.1 sec: FAIL exynos5420-arndale-octa 0 min 0.1 sec: FAIL armada-xp-openblocks-ax3-4 0 min 25.0 sec: PASS omap5-uevm 0 min 0.1 sec: FAIL omap4-panda-es 0 min 52.3 sec: PASS exynos5250-arndale 0 min 0.2 sec: FAIL arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.4 sec: PASS sun4i-a10-cubieboard 0 min 15.7 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.1 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.0 sec: PASS exynos5250-arndale 0 min 34.9 sec: PASS exynos5410-smdk5410 0 min 27.0 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 0.2 sec: FAIL imx6dl-wandboard,wand-solo 0 min 0.1 sec: FAIL imx6q-wandboard 0 min 0.2 sec: FAIL arm-u8500_defconfig ------------------- ste-snowball 1 min 48.0 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.4 sec: PASS armada-370-mirabox 0 min 22.3 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.4 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS Console logs for failures ========================= arm-davinci_all_defconfig ------------------------- legacy,dm365evm: FAIL: last 40 lines of boot log: ------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL da850-evm: FAIL: last 40 lines of boot log: ------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.19 seconds. # PYBOOT: Result: FAIL armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.17 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL am335x-boneblack: FAIL: last 40 lines of boot log: -------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL sun4i-a10-cubieboard: FAIL: last 40 lines of boot log: ------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL exynos5410-smdk5410: FAIL: last 40 lines of boot log: ----------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL bcm28155-ap: FAIL: last 40 lines of boot log: --------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap3-beagle-xm: FAIL: last 40 lines of boot log: ------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL exynos5420-arndale-octa: FAIL: last 40 lines of boot log: --------------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL omap5-uevm: FAIL: last 40 lines of boot log: -------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL exynos5250-arndale: FAIL: last 40 lines of boot log: ---------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL imx6dl-wandboard,wand-solo: FAIL: last 40 lines of boot log: ------------------------------------------------------------ Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.15 seconds. # PYBOOT: Result: FAIL imx6q-wandboard: FAIL: last 40 lines of boot log: ------------------------------------------------- Conmux::Registry::lookup: dummy: error - ENOENT entry not found ~$off # PYBOOT: Exception: ERROR: Unable to connect to console. Giving up. # PYBOOT: Time: 0.16 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.438598] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.450073] musb-ux500 musb-hdrc.20.auto: Error applying setting, reverse things back [ 3.458618] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.470550] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.477874] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.489349] musb-hdrc musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.497192] HS USB OTG: no transceiver configured [ 3.501892] musb-hdrc musb-hdrc.21.auto: musb_init_controller failed with status -517 [ 3.509735] platform musb-hdrc.21.auto: Driver musb-hdrc requests probe deferral [ 3.517669] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.21.auto [ 3.529602] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.21.auto) status -22 [ 3.536895] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.548400] musb-ux500 musb-hdrc.21.auto: Error applying setting, reverse things back [ 3.556915] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.568847] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.576171] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.587646] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.595458] HS USB OTG: no transceiver configured [ 3.600158] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.608032] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.615936] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.627868] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.635192] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.646667] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.655181] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.667114] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.674438] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.685913] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.693725] HS USB OTG: no transceiver configured [ 3.698425] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.706298] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.714202] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.726135] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.733459] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.744934] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.753448] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 108.01 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

mainline boot: 32 passed 8 failed (mainline/v3.15-rc8-6055-gf1a7cd0)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:24.32 cubie2 multi_v7_defconfig : FAILED 1:37.64 cubie2 multi_lpae_defconfig : FAILED 1:24.68 cubox multi_v7_defconfig : FAILED 1:33.75 omap5uevm omap2plus_defconfig : FAILED 1:46.87 omap5uevm multi_v7_defconfig : FAILED 1:53.68 omap5uevm multi_lpae_defconfig : FAILED 1:44.81 snowball u8500_defconfig : FAILED 1:57.99 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:11.25 arndale exynos_defconfig : passed 1:11.93 arndale multi_v7_defconfig : passed 1:30.37 arndale multi_lpae_defconfig : passed 1:19.64 bbb omap2plus_defconfig : passed 1:33.41 bbb multi_v7_defconfig : passed 1:21.35 beaver tegra_defconfig : passed 1:04.03 beaver multi_v7_defconfig : passed 1:19.30 capri bcm_defconfig : passed 0:39.50 capri multi_v7_defconfig : passed 0:42.80 cubie sunxi_defconfig : passed 1:24.63 cubie multi_v7_defconfig : passed 1:46.70 dalmore tegra_defconfig : passed 1:22.21 dalmore multi_v7_defconfig : passed 1:20.73 dalmore multi_lpae_defconfig : passed 1:37.53 hummingboard imx_v6_v7_defconfig : passed 1:24.76 hummingboard multi_v7_defconfig : passed 1:16.33 jetson tegra_defconfig : passed 0:57.39 jetson multi_v7_defconfig : passed 0:59.50 jetson multi_lpae_defconfig : passed 1:10.38 panda omap2plus_defconfig : passed 1:26.56 panda multi_v7_defconfig : passed 1:47.73 sama5 sama5_defconfig : passed 1:56.05 seaboard multi_v7_defconfig : passed 1:20.20 snow exynos_defconfig : passed 1:28.65 snow multi_v7_defconfig : passed 1:28.89 snow multi_lpae_defconfig : passed 1:29.40 snowball multi_v7_defconfig : passed 3:36.53 trimslice tegra_defconfig : passed 1:09.80 trimslice multi_v7_defconfig : passed 1:05.25 wandboard imx_v6_v7_defconfig : passed 1:12.07 wandboard multi_v7_defconfig : passed 1:04.50 Offline boards: seaboard tegra_defconfig : OFFLINE 1:46.32 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.263875] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.271378] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.277272] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.286240] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.295260] scsi0 : ahci_platform [ 1.298995] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.307701] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.313346] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.321423] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.333877] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.340958] hub 1-0:1.0: USB hub found [ 1.344806] hub 1-0:1.0: 1 port detected [ 1.349869] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.355539] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.363480] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.378864] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.385909] hub 2-0:1.0: USB hub found [ 1.389749] hub 2-0:1.0: 1 port detected [ 1.394781] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.401464] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.409353] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.473722] hub 3-0:1.0: USB hub found [ 1.477560] hub 3-0:1.0: 1 port detected [ 1.482560] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.489283] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.497128] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.558679] hub 4-0:1.0: USB hub found [ 1.562524] hub 4-0:1.0: 1 port detected [ 1.567171] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.654727] No MAC Management Counters available [ 1.659502] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.666123] IP-Config: Failed to open eth0 [ 1.670254] IP-Config: No network devices available [ 1.675145] vcc3v3: disabling [ 1.678110] vcc3v0: disabling [ 1.681175] ALSA device list: [ 1.684151] No soundcards found. [ 1.688305] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.258189] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.265692] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.271580] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.280547] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.289537] scsi0 : ahci_platform [ 1.293252] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.301967] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.307611] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.315685] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328187] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335227] hub 1-0:1.0: USB hub found [ 1.339085] hub 1-0:1.0: 1 port detected [ 1.344137] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.349807] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.357747] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373170] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380190] hub 2-0:1.0: USB hub found [ 1.384025] hub 2-0:1.0: 1 port detected [ 1.389034] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.395720] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.403601] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468058] hub 3-0:1.0: USB hub found [ 1.471909] hub 3-0:1.0: 1 port detected [ 1.476910] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.483633] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491468] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.552989] hub 4-0:1.0: USB hub found [ 1.556832] hub 4-0:1.0: 1 port detected [ 1.561471] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:18 UTC (18) [ 1.649032] No MAC Management Counters available [ 1.653805] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.660417] IP-Config: Failed to open eth0 [ 1.664538] IP-Config: No network devices available [ 1.669427] vcc3v3: disabling [ 1.672392] vcc3v0: disabling [ 1.675467] ALSA device list: [ 1.678447] No soundcards found. [ 1.682589] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.890289] usb1-vbus: 5000 mV [ 0.893732] usb2-vbus: 5000 mV [ 0.965201] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.972688] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.978580] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.987550] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996456] scsi0 : ahci_platform [ 1.000108] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008322] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.013907] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.021761] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045221] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052191] hub 1-0:1.0: USB hub found [ 1.056035] hub 1-0:1.0: 1 port detected [ 1.060508] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066150] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.073993] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095166] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102036] hub 2-0:1.0: USB hub found [ 1.105866] hub 2-0:1.0: 1 port detected [ 1.110300] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.116972] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.124785] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.189966] hub 3-0:1.0: USB hub found [ 1.193753] hub 3-0:1.0: 1 port detected [ 1.198254] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.204889] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.212748] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.279982] hub 4-0:1.0: USB hub found [ 1.283776] hub 4-0:1.0: 1 port detected [ 1.288121] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:16 UTC (16) [ 1.375194] ata1: SATA link down (SStatus 0 SControl 300) [ 1.391502] No MAC Management Counters available [ 1.396269] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.402864] IP-Config: Failed to open eth0 [ 1.406990] IP-Config: No network devices available [ 1.411871] vcc3v3: disabling [ 1.414835] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.233366] SPEAr-ehci: EHCI SPEAr driver [ 1.237462] tegra-ehci: Tegra EHCI driver [ 1.241581] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247757] ohci-pci: OHCI PCI platform driver [ 1.252253] ohci-platform: OHCI generic platform driver [ 1.257557] ohci-omap3: OHCI OMAP3 driver [ 1.261648] SPEAr-ohci: OHCI SPEAr driver [ 1.266355] usbcore: registered new interface driver usb-storage [ 1.273740] mousedev: PS/2 mouse device common for all mice [ 1.280617] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.289858] i2c /dev entries driver [ 1.295432] usbcore: registered new interface driver uvcvideo [ 1.301183] USB Video Class driver (1.1.1) [ 1.305270] gspca_main: v2.14.0 registered [ 1.312333] orion_wdt: Initial timeout 25 sec [ 1.317673] sdhci: Secure Digital Host Controller Interface driver [ 1.323845] sdhci: Copyright(c) Pierre Ossman [ 1.328824] Synopsys Designware Multimedia Card Interface Driver [ 1.335163] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.341507] usbcore: registered new interface driver usbhid [ 1.347070] usbhid: USB HID core driver [ 1.351907] ata1: SATA link down (SStatus 0 SControl F300) [ 1.360308] TCP: cubic registered [ 1.363651] NET: Registered protocol family 17 [ 1.368106] can: controller area network core (rev 20120528 abi 9) [ 1.374336] NET: Registered protocol family 29 [ 1.378769] can: raw protocol (rev 20120528) [ 1.383014] can: broadcast manager protocol (rev 20120528 t) [ 1.388666] can: netlink gateway (rev 20130117) max_hops=1 [ 1.394517] Key type dns_resolver registered [ 1.398964] ThumbEE CPU extension supported. [ 1.403240] Registering SWP/SWPB emulation handler [ 1.408011] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413522] USB Power: 5000 mV [ 1.417020] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 22:46:50 UTC (1401922010) [ 1.427471] ALSA device list: [ 1.430442] No soundcards found. [ 1.434371] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.642777] can: raw protocol (rev 20120528) [ 47.642780] can: broadcast manager protocol (rev 20120528 t) [ 47.642787] can: netlink gateway (rev 20130117) max_hops=1 [ 47.643081] Key type dns_resolver registered [ 47.643157] omap_vc_init_channel: No PMIC info for vdd_core [ 47.643159] omap_vp_init: No PMIC info for vdd_core [ 47.643162] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.643164] omap_vp_init: No PMIC info for vdd_mm [ 47.643168] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.643170] omap_vp_init: No PMIC info for vdd_mpu [ 47.643468] ThumbEE CPU extension supported. [ 47.643478] Registering SWP/SWPB emulation handler [ 47.714839] palmas 0-0048: Irq flag is 0x00000000 [ 47.720988] mmc0: new high speed MMC card at address 0001 [ 47.726862] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.731674] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.737980] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.744872] mmcblk0: unknown partition table [ 47.750222] mmcblk0boot1: unknown partition table [ 47.755988] mmcblk0boot0: unknown partition table [ 47.761021] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.768726] smps123: 600 <--> 1500 mV at 1060 mV [ 47.774887] smps45: 600 <--> 1310 mV at 1030 mV [ 47.781339] smps6: 1200 mV [ 47.785299] smps7: 1800 mV [ 47.789405] smps8: 600 <--> 1310 mV at 1040 mV [ 47.795141] smps9: failed to get the current voltage [ 47.800393] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.812439] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937131] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082139] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088217] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095668] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102524] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110218] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123618] ALSA device list: [ 48.126719] No soundcards found. [ 48.130728] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.080629] can: raw protocol (rev 20120528) [ 48.080632] can: broadcast manager protocol (rev 20120528 t) [ 48.080639] can: netlink gateway (rev 20130117) max_hops=1 [ 48.080914] Key type dns_resolver registered [ 48.080981] omap_vc_init_channel: No PMIC info for vdd_core [ 48.080984] omap_vp_init: No PMIC info for vdd_core [ 48.080988] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.080990] omap_vp_init: No PMIC info for vdd_mm [ 48.080994] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.080995] omap_vp_init: No PMIC info for vdd_mpu [ 48.081293] ThumbEE CPU extension supported. [ 48.081303] Registering SWP/SWPB emulation handler [ 48.152340] palmas 0-0048: Irq flag is 0x00000000 [ 48.158731] mmc0: new high speed MMC card at address 0001 [ 48.164619] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.169436] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.175714] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.182567] mmcblk0: unknown partition table [ 48.187916] mmcblk0boot1: unknown partition table [ 48.193096] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.198917] mmcblk0boot0: unknown partition table [ 48.205127] smps123: 600 <--> 1500 mV at 1060 mV [ 48.211343] smps45: 600 <--> 1310 mV at 1030 mV [ 48.217795] smps6: 1200 mV [ 48.221793] smps7: 1800 mV [ 48.225897] smps8: 600 <--> 1310 mV at 1040 mV [ 48.231622] smps9: failed to get the current voltage [ 48.236866] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.248912] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.375069] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.382187] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.388262] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.395692] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.402540] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.410222] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.423568] ALSA device list: [ 48.426676] No soundcards found. [ 48.430670] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.560193] NET: Registered protocol family 15 [ 2.560356] Key type dns_resolver registered [ 2.560447] omap_vc_init_channel: No PMIC info for vdd_core [ 2.560450] omap_vp_init: No PMIC info for vdd_core [ 2.560458] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.560460] omap_vp_init: No PMIC info for vdd_mm [ 2.560468] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.560470] omap_vp_init: No PMIC info for vdd_mpu [ 2.561009] ThumbEE CPU extension supported. [ 2.561026] Registering SWP/SWPB emulation handler [ 2.561030] SmartReflex Class3 initialized [ 2.664299] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.668059] palmas 0-0048: Irq flag is 0x00000000 [ 2.674404] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.680833] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.689814] mmcblk0: unknown partition table [ 2.695568] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.698034] mmcblk0boot1: unknown partition table [ 2.707483] mmcblk0boot0: unknown partition table [ 2.750436] smps123: 600 <--> 1500 mV at 1060 mV [ 2.757447] smps45: 600 <--> 1310 mV at 1030 mV [ 2.764641] smps6: 1200 mV [ 2.769372] smps7: 1800 mV [ 2.774246] smps8: 600 <--> 1310 mV at 1040 mV [ 2.780717] smps9: failed to get the current voltage [ 2.786657] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.800953] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.809811] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.816750] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.822905] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.832012] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.841356] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.848305] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.856789] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.865459] sr_init: No PMIC hook to init smartreflex [ 2.870979] sr_init: platform driver register failed for SR [ 2.899091] pbias_mmc_omap5: disabling [ 2.904564] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.597869] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605804] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617736] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.625030] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636535] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.645019] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.664276] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675750] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683563] HS USB OTG: no transceiver configured [ 3.688293] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.696136] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.704071] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.716003] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.723297] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734771] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.743316] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.755249] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762542] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.774017] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781829] HS USB OTG: no transceiver configured [ 3.786560] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.794403] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.802337] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.814239] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821563] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.833038] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841583] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.853515] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860839] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872314] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.880126] HS USB OTG: no transceiver configured [ 3.884857] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892700] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900604] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.912536] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919830] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.931335] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 16 warnings 0 failures (mainline/v3.15-rc8-6055-gf1a7cd0)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: f1a7cd0 Merge branch 'for-linus' of git://git.kernel.dk/linux-block into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-6055-gf1a7cd0/ Runtime: 45m 44s Passed: 126 Failed: 0 Warnings: 16 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:211:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x24ed4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd90): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x859d0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd10): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85410): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d4f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

mainline boot: 52 pass, 3 fail (v3.15-rc8-72-g54539cd)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-72-g54539cd Failed boot tests (console logs at the end) =========================================== armada-370-mirabox: FAIL: arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ste-snowball: FAIL: arm-multi_v7_defconfig ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.6 sec: PASS da850-evm 0 min 15.6 sec: PASS arm-tegra_defconfig ------------------- tegra30-beaver 0 min 17.4 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 43.0 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.3 sec: PASS armada-370-mirabox 0 min 20.0 sec: FAIL arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 37.7 sec: PASS am335x-boneblack 0 min 22.3 sec: PASS omap3-beagle-xm 0 min 48.6 sec: PASS legacy,3530beagle 0 min 23.0 sec: PASS (Warnings: 1) omap4-panda 0 min 54.7 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS (Warnings: 1) am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 25.0 sec: PASS omap5-uevm 0 min 51.1 sec: PASS omap3-n900 0 min 17.6 sec: PASS (Warnings: 1) legacy,n900 0 min 17.1 sec: PASS (Warnings: 1) omap4-panda-es 0 min 57.0 sec: PASS legacy,3730storm 0 min 23.5 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- ste-snowball 1 min 7.8 sec: FAIL tegra30-beaver 0 min 17.1 sec: PASS am335x-boneblack 0 min 21.7 sec: PASS omap3-beagle-xm 0 min 46.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.3 sec: PASS armada-370-mirabox 0 min 21.7 sec: PASS omap4-panda 0 min 52.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS sun4i-a10-cubieboard 0 min 16.8 sec: PASS bcm28155-ap 0 min 26.1 sec: PASS omap3-overo-tobi 0 min 21.8 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 15.0 sec: PASS am335x-bone 0 min 23.7 sec: PASS omap3-overo-storm-tobi 0 min 20.1 sec: PASS omap5-uevm 1 min 41.5 sec: PASS omap3-n900 0 min 15.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 13.9 sec: PASS omap4-panda-es 0 min 48.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 10.7 sec: PASS sun4i-a10-cubieboard 0 min 15.3 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 23.5 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 30.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.7 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.6 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 21.8 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.3 sec: PASS armada-370-mirabox 0 min 22.2 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 21.9 sec: PASS armada-370-mirabox 0 min 19.9 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.2 sec: PASS Console logs for failures ========================= arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-370-mirabox: FAIL: last 40 lines of boot log: ---------------------------------------------------- orion-ehci d0051000.usb: irq 26, io mem 0xd0051000 orion-ehci d0051000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xhci_hcd 0000:02:00.0: xHCI Host Controller xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice rtc-mv d0010300.rtc: rtc core: registered d0010300.rtc as rtc0 request_module: runaway loop modprobe binfmt-4c46 orion_wdt: Initial timeout 229 sec mvsdio d00d4000.mvsdio: lacking card detect (fall back to polling) usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered rtc-mv d0010300.rtc: setting system clock to 2014-06-04 04:08:46 UTC (1401854926) ALSA device list: No soundcards found. Freeing unused kernel memory: 192K (c0522000 - c0552000) request_module: runaway loop modprobe binfmt-4c46 request_module: runaway loop modprobe binfmt-4c46 Failed to execute /init (error -8) mmc0: new high speed SDIO card at address 0001 mwifiex_sdio mmc0:0001:1: Direct firmware load failed with error -2 mwifiex_sdio mmc0:0001:1: Falling back to user helper Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2 Starting init: /sbin/init exists but couldn't execute it (error -8) Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ---[ end Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. ~$off # PYBOOT: Exception: userspace: failed to find root shell: Kernel panic # PYBOOT: Time: 20.00 seconds. # PYBOOT: Result: FAIL arm-multi_v7_defconfig ---------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 48.406066] EXT4-fs (mmcblk0p3): no journal found [ 48.411529] List of all partitions: [ 48.415039] b300 7634944 mmcblk0 driver: mmcblk [ 48.420349] b301 3968 mmcblk0p1 00000000-01 [ 48.425689] b302 53248 mmcblk0p2 00000000-02 [ 48.430999] b303 454656 mmcblk0p3 00000000-03 [ 48.436340] b330 128 mmcblk0rpmb (driver?) [ 48.441558] b320 2048 mmcblk0boot1 (driver?) [ 48.446899] b310 2048 mmcblk0boot0 (driver?) [ 48.452209] No filesystem could mount root, tried: ext4 [ 48.457519] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) [ 48.465972] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-00072-g54539cd #1 [ 48.473571] [<c021548c>] (unwind_backtrace) from [<c02110e4>] (show_stack+0x10/0x14) [ 48.481292] [<c02110e4>] (show_stack) from [<c07b753c>] (dump_stack+0x78/0x94) [ 48.488525] [<c07b753c>] (dump_stack) from [<c07b501c>] (panic+0x90/0x208) [ 48.495391] [<c07b501c>] (panic) from [<c0a63038>] (mount_block_root+0x1f4/0x230) [ 48.502899] [<c0a63038>] (mount_block_root) from [<c0a63168>] (mount_root+0xf4/0x114) [ 48.510711] [<c0a63168>] (mount_root) from [<c0a632b4>] (prepare_namespace+0x12c/0x190) [ 48.518707] [<c0a632b4>] (prepare_namespace) from [<c0a62c64>] (kernel_init_freeable+0x184/0x1cc) [ 48.527587] [<c0a62c64>] (kernel_init_freeable) from [<c07b1e84>] (kernel_init+0x8/0xec) [ 48.535675] [<c07b1e84>] (kernel_init) from [<c020e838>] (ret_from_fork+0x14/0x3c) [ 48.543243] CPU1: stopping [ 48.545959] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-00072-g54539cd #1 [ 48.553527] [<c021548c>] (unwind_backtrace) from [<c02110e4>] (show_stack+0x10/0x14) [ 48.561248] [<c02110e4>] (show_stack) from [<c07b753c>] (dump_stack+0x78/0x94) [ 48.568481] [<c07b753c>] (dump_stack) from [<c0213cfc>] (handle_IPI+0x138/0x174) [ 48.575866] [<c0213cfc>] (handle_IPI) from [<c0208890>] (gic_handle_irq+0x54/0x5c) [ 48.583435] [<c0208890>] (gic_handle_irq) from [<c0211c00>] (__irq_svc+0x40/0x50) [ 48.590911] Exception stack(0xea085f90 to 0xea085fd8) [ 48.595947] 5f80: ffffffed 00000000 00000000 c021a820 [ 48.604125] 5fa0: ea084000 c0af44b8 c0af4450 00000000 00000000 ffffffed c0aeade0 ea084000 [ 48.612304] 5fc0: 00000000 ea085fd8 c020f37c c020f380 60000113 ffffffff [ 48.618896] [<c0211c00>] (__irq_svc) from [<c020f380>] (arch_cpu_idle+0x30/0x3c) [ 48.626312] [<c020f380>] (arch_cpu_idle) from [<c0275328>] (cpu_startup_entry+0x11c/0x218) [ 48.634582] [<c0275328>] (cpu_startup_entry) from [<002089c4>] (0x2089c4) [ 48.641357] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 67.81 seconds. # PYBOOT: Result: FAIL arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.694763] EXT4-fs (mmcblk0p3): no journal found [ 3.699676] List of all partitions: [ 3.703216] b300 7634944 mmcblk0 driver: mmcblk [ 3.708526] b301 3968 mmcblk0p1 00000000-01 [ 3.713928] b302 53248 mmcblk0p2 00000000-02 [ 3.719268] b303 454656 mmcblk0p3 00000000-03 [ 3.724609] b318 128 mmcblk0rpmb (driver?) [ 3.729827] b310 2048 mmcblk0boot1 (driver?) [ 3.735168] b308 2048 mmcblk0boot0 (driver?) [ 3.740478] No filesystem could mount root, tried: ext4 [ 3.745819] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) [ 3.754241] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-00072-g54539cd #1 [ 3.761840] [<c0013ef4>] (unwind_backtrace) from [<c0010d80>] (show_stack+0x10/0x14) [ 3.769592] [<c0010d80>] (show_stack) from [<c041ea50>] (dump_stack+0x80/0xcc) [ 3.776794] [<c041ea50>] (dump_stack) from [<c041c2e0>] (panic+0x90/0x1fc) [ 3.783691] [<c041c2e0>] (panic) from [<c05ad03c>] (mount_block_root+0x1f4/0x230) [ 3.791168] [<c05ad03c>] (mount_block_root) from [<c05ad258>] (mount_root+0xf4/0x114) [ 3.798980] [<c05ad258>] (mount_root) from [<c05ad3dc>] (prepare_namespace+0x164/0x1c8) [ 3.806976] [<c05ad3dc>] (prepare_namespace) from [<c05acc68>] (kernel_init_freeable+0x180/0x1c8) [ 3.815856] [<c05acc68>] (kernel_init_freeable) from [<c041af68>] (kernel_init+0x8/0xec) [ 3.823944] [<c041af68>] (kernel_init) from [<c000e678>] (ret_from_fork+0x14/0x3c) [ 3.831512] CPU0: stopping [ 3.834197] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-00072-g54539cd #1 [ 3.841766] [<c0013ef4>] (unwind_backtrace) from [<c0010d80>] (show_stack+0x10/0x14) [ 3.849517] [<c0010d80>] (show_stack) from [<c041ea50>] (dump_stack+0x80/0xcc) [ 3.856719] [<c041ea50>] (dump_stack) from [<c0012de0>] (handle_IPI+0x130/0x15c) [ 3.864135] [<c0012de0>] (handle_IPI) from [<c000855c>] (gic_handle_irq+0x54/0x5c) [ 3.871704] [<c000855c>] (gic_handle_irq) from [<c0011880>] (__irq_svc+0x40/0x70) [ 3.879150] Exception stack(0xc05ddf60 to 0xc05ddfa8) [ 3.884216] df60: eefb9598 00000000 00000bd8 00000000 c05dc000 c05e4468 c05e4418 c05dc000 [ 3.892364] df80: 00000001 eefb9dec c05d9de0 c05dc000 00000000 c05ddfa8 c005c584 c004d020 [ 3.900543] dfa0: 60000013 ffffffff [ 3.904022] [<c0011880>] (__irq_svc) from [<c004d020>] (cpu_startup_entry+0xb4/0x214) [ 3.911865] [<c004d020>] (cpu_startup_entry) from [<c05aca8c>] (start_kernel+0x2ec/0x348) [ 3.920043] [<c05aca8c>] (start_kernel) from [<00008074>] (0x8074) [ 3.926208] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 21.83 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

mainline boot: 61 pass, 1 fail (v3.15-rc8-5696-gb77279b)

by Kevin's boot bot

Tree/Branch: mainline Git describe: v3.15-rc8-5696-gb77279b Failed boot tests (console logs at the end) =========================================== ste-snowball: FAIL: arm-u8500_defconfig Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.7 sec: PASS da850-evm 0 min 15.8 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 18.2 sec: PASS tegra30-beaver 0 min 17.6 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.5 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS omap5-uevm 1 min 44.0 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.6 sec: PASS armada-370-mirabox 0 min 21.4 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 37.3 sec: PASS am335x-boneblack 0 min 22.6 sec: PASS omap3-beagle-xm 0 min 49.1 sec: PASS legacy,3530beagle 0 min 30.7 sec: PASS (Warnings: 1) omap4-panda 0 min 52.8 sec: PASS omap3-overo-tobi 0 min 23.3 sec: PASS am335x-bone 0 min 24.2 sec: PASS omap3-overo-storm-tobi 0 min 24.9 sec: PASS omap5-uevm 0 min 51.0 sec: PASS (Warnings: 6) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.2 sec: PASS (Warnings: 1) omap4-panda-es 0 min 55.5 sec: PASS legacy,3730storm 0 min 19.8 sec: PASS legacy,3530overo 0 min 21.3 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.3 sec: PASS am335x-boneblack 0 min 22.1 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 17.6 sec: PASS exynos5410-smdk5410 0 min 32.4 sec: PASS am335x-bone 0 min 23.8 sec: PASS tegra124-jetson-tk1 0 min 17.8 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 53.5 sec: PASS imx6q-wandboard 0 min 13.9 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 20.5 sec: PASS tegra30-beaver 0 min 17.4 sec: PASS omap3-n900 0 min 16.6 sec: PASS bcm28155-ap 0 min 27.1 sec: PASS omap3-overo-tobi 0 min 22.1 sec: PASS omap3-overo-storm-tobi 0 min 20.9 sec: PASS omap3-beagle-xm 0 min 47.0 sec: PASS exynos5420-arndale-octa 0 min 40.9 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 37.7 sec: PASS (Warnings: 6) omap4-panda-es 0 min 52.4 sec: PASS exynos5250-arndale 0 min 31.2 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 11.6 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.9 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 40.0 sec: PASS exynos5250-arndale 0 min 29.8 sec: PASS exynos5410-smdk5410 0 min 27.3 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.9 sec: PASS imx6dl-wandboard,wand-solo 0 min 16.0 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 24.6 sec: FAIL arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 27.8 sec: PASS armada-370-mirabox 0 min 22.9 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 15.3 sec: PASS Console logs for failures ========================= arm-u8500_defconfig ------------------- ste-snowball: FAIL: last 40 lines of boot log: ---------------------------------------------- [ 3.701660] EXT4-fs (mmcblk0p3): no journal found [ 3.706726] List of all partitions: [ 3.710235] b300 7634944 mmcblk0 driver: mmcblk [ 3.715606] b301 3968 mmcblk0p1 00000000-01 [ 3.720947] b302 53248 mmcblk0p2 00000000-02 [ 3.726257] b303 454656 mmcblk0p3 00000000-03 [ 3.731628] b318 128 mmcblk0rpmb (driver?) [ 3.736907] b310 2048 mmcblk0boot1 (driver?) [ 3.742248] b308 2048 mmcblk0boot0 (driver?) [ 3.747558] No filesystem could mount root, tried: ext4 [ 3.753021] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) [ 3.761444] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc8-05696-gb77279b #1 [ 3.769042] [<c0013ef4>] (unwind_backtrace) from [<c0010d80>] (show_stack+0x10/0x14) [ 3.776794] [<c0010d80>] (show_stack) from [<c0421af4>] (dump_stack+0x80/0xcc) [ 3.783996] [<c0421af4>] (dump_stack) from [<c041f384>] (panic+0x90/0x1fc) [ 3.790893] [<c041f384>] (panic) from [<c05b203c>] (mount_block_root+0x1f4/0x230) [ 3.798370] [<c05b203c>] (mount_block_root) from [<c05b2258>] (mount_root+0xf4/0x114) [ 3.806182] [<c05b2258>] (mount_root) from [<c05b23dc>] (prepare_namespace+0x164/0x1c8) [ 3.814208] [<c05b23dc>] (prepare_namespace) from [<c05b1c68>] (kernel_init_freeable+0x180/0x1c8) [ 3.823059] [<c05b1c68>] (kernel_init_freeable) from [<c041e00c>] (kernel_init+0x8/0xec) [ 3.831146] [<c041e00c>] (kernel_init) from [<c000e678>] (ret_from_fork+0x14/0x3c) [ 3.838714] CPU1: stopping [ 3.841430] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.15.0-rc8-05696-gb77279b #1 [ 3.848999] [<c0013ef4>] (unwind_backtrace) from [<c0010d80>] (show_stack+0x10/0x14) [ 3.856719] [<c0010d80>] (show_stack) from [<c0421af4>] (dump_stack+0x80/0xcc) [ 3.863952] [<c0421af4>] (dump_stack) from [<c0012de0>] (handle_IPI+0x130/0x15c) [ 3.871337] [<c0012de0>] (handle_IPI) from [<c000855c>] (gic_handle_irq+0x54/0x5c) [ 3.878906] [<c000855c>] (gic_handle_irq) from [<c0011880>] (__irq_svc+0x40/0x70) [ 3.886383] Exception stack(0xee885f68 to 0xee885fb0) [ 3.891418] 5f60: ee885fb0 0000027c e1301a8a 00000000 e0b619b5 00000000 [ 3.899597] 5f80: c0605e9c eefc1de8 eefc1de8 eefc1dec 00000001 ee884000 00000010 ee885fb0 [ 3.907775] 5fa0: c005f3e8 c02a0980 60000113 ffffffff [ 3.912811] [<c0011880>] (__irq_svc) from [<c02a0980>] (cpuidle_enter_state+0x54/0xf4) [ 3.920745] [<c02a0980>] (cpuidle_enter_state) from [<c004d48c>] (cpu_startup_entry+0x160/0x210) [ 3.929504] [<c004d48c>] (cpu_startup_entry) from [<00008604>] (0x8604) [ 3.936126] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,3) ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: Kernel panic # PYBOOT: Time: 24.64 seconds. # PYBOOT: Result: FAIL

10 years, 6 months

mainline boot: 31 passed 2 failed (mainline/v3.15-rc8-72-g54539cd)

by Olof's autobooter

Failed boards: cubox multi_v7_defconfig : FAILED 1:28.96 seaboard tegra_defconfig : FAILED 1:57.64 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:16.58 arndale exynos_defconfig : passed 1:13.53 bbb multi_v7_defconfig : passed 1:14.64 beaver tegra_defconfig : passed 1:05.64 beaver multi_v7_defconfig : passed 1:16.95 capri bcm_defconfig : passed 0:39.29 capri multi_v7_defconfig : passed 0:41.28 cubie sunxi_defconfig : passed 1:13.15 cubie multi_v7_defconfig : passed 1:32.41 cubie2 sunxi_defconfig : passed 1:11.47 cubie2 multi_v7_defconfig : passed 1:29.47 cubie2 multi_lpae_defconfig : passed 1:26.51 dalmore tegra_defconfig : passed 1:22.95 dalmore multi_v7_defconfig : passed 1:18.58 dalmore multi_lpae_defconfig : passed 1:29.21 hummingboard imx_v6_v7_defconfig : passed 1:24.33 hummingboard multi_v7_defconfig : passed 1:10.59 omap5uevm omap2plus_defconfig : passed 1:06.04 omap5uevm multi_v7_defconfig : passed 2:02.68 omap5uevm multi_lpae_defconfig : passed 1:54.15 panda omap2plus_defconfig : warnings 1:33.84 panda multi_v7_defconfig : passed 1:46.51 sama5 sama5_defconfig : passed 1:52.38 seaboard multi_v7_defconfig : passed 1:10.09 snow exynos_defconfig : passed 1:33.34 snowball u8500_defconfig : passed 2:06.72 snowball multi_v7_defconfig : passed 3:17.51 trimslice tegra_defconfig : passed 1:07.94 trimslice multi_v7_defconfig : passed 0:57.34 wandboard imx_v6_v7_defconfig : passed 1:01.48 wandboard multi_v7_defconfig : passed 1:11.63 Offline boards: bbb omap2plus_defconfig : OFFLINE 0:58.64 Board legend is available at http://arm-soc.lixom.net/boards.html Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.203269] orion-ehci f1050000.usb-host: new USB bus registered, assigned bus number 1 [ 1.211429] orion-ehci f1050000.usb-host: irq 24, io mem 0xf1050000 [ 1.232863] orion-ehci f1050000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.240009] hub 1-0:1.0: USB hub found [ 1.243798] hub 1-0:1.0: 1 port detected [ 1.248125] orion-ehci f1051000.usb-host: EHCI Host Controller [ 1.253986] orion-ehci f1051000.usb-host: new USB bus registered, assigned bus number 2 [ 1.262102] orion-ehci f1051000.usb-host: irq 25, io mem 0xf1051000 [ 1.282859] orion-ehci f1051000.usb-host: USB 2.0 started, EHCI 1.00 [ 1.289926] hub 2-0:1.0: USB hub found [ 1.293718] hub 2-0:1.0: 1 port detected [ 1.298043] SPEAr-ehci: EHCI SPEAr driver [ 1.302136] tegra-ehci: Tegra EHCI driver [ 1.306717] usbcore: registered new interface driver usb-storage [ 1.314056] mousedev: PS/2 mouse device common for all mice [ 1.320798] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.329975] i2c /dev entries driver [ 1.335063] usbcore: registered new interface driver uvcvideo [ 1.340788] USB Video Class driver (1.1.1) [ 1.344904] gspca_main: v2.14.0 registered [ 1.352493] orion_wdt: Initial timeout 25 sec [ 1.357558] sdhci: Secure Digital Host Controller Interface driver [ 1.363727] sdhci: Copyright(c) Pierre Ossman [ 1.368555] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.374801] usbcore: registered new interface driver usbhid [ 1.380341] usbhid: USB HID core driver [ 1.387069] TCP: cubic registered [ 1.390377] NET: Registered protocol family 17 [ 1.395022] Key type dns_resolver registered [ 1.399447] ThumbEE CPU extension supported. [ 1.403737] Registering SWP/SWPB emulation handler [ 1.408509] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413980] USB Power: 5000 mV [ 1.417465] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 19:12:33 UTC (1401909153) [ 1.427912] ALSA device list: [ 1.430868] No soundcards found. [ 1.435006] ata1: SATA link down (SStatus 0 SControl F300) [ 1.440577] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board seaboard-tegra_defconfig failure log: ------------------------------------------------- [ERR] [ 0.908388] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ERR] [ 1.194055] sbs-battery 5-000b: sbs_probe: Failed to get device status [ERR] [ 1.458697] isl29018 0-0044: regmap initialization failed: -121 [ERR] [ 1.688429] tegra-snd-wm8903 sound.7: ASoC: no source widget found for Playback [ERR] [ 1.695876] tegra-snd-wm8903 sound.7: ASoC: no source widget found for Capture [ERR] [ 1.859268] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ERR] [ 17.199047] irq 122: nobody cared (try booting with the "irqpoll" option) [ERR] [ 17.410349] handlers: [ERR] [ 17.412624] [<c028bfa4>] serial8250_interrupt root@seaboard:~#dmesg -l warn | awk '{ print "[WARN] " $0 }' dmesg -l warn | awk '{ print "[WARN] " $0 }' [WARN] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 [WARN] [ 0.000000] Memory: 964740K/1048576K available (6012K kernel code, 331K rwdata, 1996K rodata, 264K init, 344K bss, 83836K reserved, 270336K highmem) [WARN] [ 0.170962] CPU1: Booted secondary processor [WARN] [ 0.819467] bounce pool size: 64 pages [WARN] [ 1.200589] sbs-battery: probe of 5-000b failed with error -121 [WARN] [ 1.207066] 3-004c supply vcc not found, using dummy regulator [WARN] [ 1.214401] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 1200000 KHz [WARN] [ 1.223846] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [WARN] [ 1.257810] mmc0: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.330923] mmc1: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.390044] mmc2: Invalid maximum block size, assuming 512 bytes [WARN] [ 1.452242] isl29018 0-0044: No cache defaults, reading back from HW [WARN] [ 1.464639] isl29018: probe of 0-0044 failed with error -121 [WARN] [ 1.639312] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [WARN] [ 1.655060] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.663831] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [WARN] [ 1.703914] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [WARN] [ 1.731734] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [WARN] [ 5.167270] EXT3-fs (mmcblk0p3): warning: maximal mount count reached, running e2fsck is recommended [WARN] [ 17.205828] CPU: 0 PID: 87 Comm: startpar Not tainted 3.15.0-rc8-00072-g54539cd #1 [WARN] [ 17.213415] [<c0015d54>] (unwind_backtrace) from [<c001194c>] (show_stack+0x10/0x14) [WARN] [ 17.221159] [<c001194c>] (show_stack) from [<c05add18>] (dump_stack+0xa0/0xd8) [WARN] [ 17.228381] [<c05add18>] (dump_stack) from [<c006c560>] (__report_bad_irq+0x28/0xc0) [WARN] [ 17.236113] [<c006c560>] (__report_bad_irq) from [<c006caa4>] (note_interrupt+0x214/0x264) [WARN] [ 17.244366] [<c006caa4>] (note_interrupt) from [<c006a698>] (handle_irq_event_percpu+0xb8/0x130) [WARN] [ 17.253136] [<c006a698>] (handle_irq_event_percpu) from [<c006a74c>] (handle_irq_event+0x3c/0x5c) [WARN] [ 17.261995] [<c006a74c>] (handle_irq_event) from [<c006d720>] (handle_fasteoi_irq+0xac/0x1a0) [WARN] [ 17.270507] [<c006d720>] (handle_fasteoi_irq) from [<c0069d54>] (generic_handle_irq+0x2c/0x3c~$off # PYBOOT: Exception: ERROR: Timeout waiting for command: dmesg -l warn | awk '{ print "[WARN] " $0 }'.

10 years, 6 months

arm-soc boot: 62 pass, 0 fail (v3.15-rc8-4592-g6f5e160)

by Kevin's boot bot

Tree/Branch: arm-soc Git describe: v3.15-rc8-4592-g6f5e160 Full Report =========== arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.4 sec: PASS da850-evm 0 min 15.2 sec: PASS arm-tegra_defconfig ------------------- tegra124-jetson-tk1 0 min 17.1 sec: PASS tegra30-beaver 0 min 21.5 sec: PASS arm-multi_v7_defconfig+CONFIG_ARM_LPAE=y ---------------------------------------- tegra124-jetson-tk1 0 min 17.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 23.8 sec: PASS omap5-uevm 1 min 38.6 sec: PASS (Warnings: 6) sun7i-a20-cubieboard2 0 min 12.9 sec: PASS arm-mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 23.9 sec: PASS armada-370-mirabox 0 min 21.5 sec: PASS arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 41.5 sec: PASS am335x-boneblack 0 min 22.5 sec: PASS omap3-beagle-xm 0 min 50.3 sec: PASS legacy,3530beagle 0 min 23.2 sec: PASS (Warnings: 1) omap4-panda 0 min 57.6 sec: PASS omap3-overo-tobi 0 min 23.2 sec: PASS am335x-bone 0 min 24.1 sec: PASS omap3-overo-storm-tobi 0 min 22.0 sec: PASS omap5-uevm 0 min 52.2 sec: PASS (Warnings: 6) omap3-n900 0 min 17.6 sec: PASS legacy,n900 0 min 17.5 sec: PASS (Warnings: 1) omap4-panda-es 0 min 51.8 sec: PASS legacy,3730storm 0 min 23.1 sec: PASS legacy,3530overo 0 min 21.2 sec: PASS (Warnings: 1) arm-multi_v7_defconfig ---------------------- imx6dl-wandboard,wand-solo 0 min 15.2 sec: PASS am335x-boneblack 0 min 21.8 sec: PASS sun7i-a20-cubieboard2 0 min 12.8 sec: PASS sun4i-a10-cubieboard 0 min 20.4 sec: PASS exynos5410-smdk5410 0 min 28.7 sec: PASS am335x-bone 0 min 33.5 sec: PASS tegra124-jetson-tk1 0 min 17.2 sec: PASS armada-370-mirabox 0 min 21.8 sec: PASS omap4-panda 0 min 47.8 sec: PASS imx6q-wandboard 0 min 14.1 sec: PASS imx6dl-wandboard,wand-dual 0 min 15.4 sec: PASS ste-snowball 1 min 21.3 sec: PASS tegra30-beaver 0 min 20.1 sec: PASS omap3-n900 0 min 15.1 sec: PASS bcm28155-ap 0 min 27.0 sec: PASS omap3-overo-tobi 0 min 22.0 sec: PASS omap3-overo-storm-tobi 0 min 24.2 sec: PASS omap3-beagle-xm 0 min 45.9 sec: PASS exynos5420-arndale-octa 0 min 41.1 sec: PASS armada-xp-openblocks-ax3-4 0 min 24.9 sec: PASS omap5-uevm 1 min 38.2 sec: PASS (Warnings: 6) omap4-panda-es 0 min 53.0 sec: PASS exynos5250-arndale 0 min 35.6 sec: PASS arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 11.5 sec: PASS sun4i-a10-cubieboard 0 min 18.8 sec: PASS arm-bcm_defconfig ----------------- bcm28155-ap 0 min 22.6 sec: PASS arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 39.9 sec: PASS exynos5250-arndale 0 min 30.3 sec: PASS exynos5410-smdk5410 0 min 27.0 sec: PASS arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 15.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 15.8 sec: PASS imx6q-wandboard 0 min 14.2 sec: PASS arm-u8500_defconfig ------------------- ste-snowball 0 min 31.4 sec: PASS arm-multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y ---------------------------------------------- armada-xp-openblocks-ax3-4 0 min 26.7 sec: PASS armada-370-mirabox 0 min 22.0 sec: PASS arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.5 sec: PASS armada-370-mirabox 0 min 20.1 sec: PASS arm-sama5_defconfig ------------------- sama5d35ek 0 min 26.3 sec: PASS

10 years, 6 months

mainline build: 7 warnings 0 failures (mainline/v3.15-rc8-72-g54539cd)

by Olof's autobuilder

10 years, 6 months

mainline boot: 33 passed 8 failed (mainline/v3.15-rc8-5759-gd270506)

by Olof's autobooter

Failed boards: cubie2 sunxi_defconfig : FAILED 1:21.28 cubie2 multi_v7_defconfig : FAILED 1:35.18 cubie2 multi_lpae_defconfig : FAILED 1:22.20 cubox multi_v7_defconfig : FAILED 1:31.33 omap5uevm omap2plus_defconfig : FAILED 1:44.03 omap5uevm multi_v7_defconfig : FAILED 1:54.47 omap5uevm multi_lpae_defconfig : FAILED 1:50.83 snowball u8500_defconfig : FAILED 1:54.82 Successful boards: apc vt8500_v6_v7_defconfig : passed 1:08.33 arndale exynos_defconfig : passed 1:18.13 arndale multi_v7_defconfig : passed 1:37.06 arndale multi_lpae_defconfig : passed 1:20.24 bbb omap2plus_defconfig : passed 1:32.54 bbb multi_v7_defconfig : passed 1:24.47 beaver tegra_defconfig : passed 0:59.25 beaver multi_v7_defconfig : passed 1:00.56 capri bcm_defconfig : passed 0:39.40 capri multi_v7_defconfig : passed 0:41.36 cubie sunxi_defconfig : passed 1:11.83 cubie multi_v7_defconfig : passed 1:43.15 dalmore tegra_defconfig : passed 1:34.98 dalmore multi_v7_defconfig : passed 1:25.79 dalmore multi_lpae_defconfig : passed 1:22.55 hummingboard imx_v6_v7_defconfig : passed 1:27.36 hummingboard multi_v7_defconfig : passed 1:10.71 jetson tegra_defconfig : passed 1:00.84 jetson multi_v7_defconfig : passed 0:56.57 jetson multi_lpae_defconfig : passed 1:00.74 panda omap2plus_defconfig : warnings 1:36.78 panda multi_v7_defconfig : passed 1:52.72 sama5 sama5_defconfig : passed 1:54.75 seaboard tegra_defconfig : passed 1:16.21 seaboard multi_v7_defconfig : passed 1:12.51 snow exynos_defconfig : passed 1:29.02 snow multi_v7_defconfig : passed 1:29.25 snow multi_lpae_defconfig : passed 1:38.10 snowball multi_v7_defconfig : passed 2:36.01 trimslice tegra_defconfig : passed 1:01.97 trimslice multi_v7_defconfig : passed 1:12.50 wandboard imx_v6_v7_defconfig : passed 1:13.71 wandboard multi_v7_defconfig : passed 1:19.06 Offline boards: Board legend is available at http://arm-soc.lixom.net/boards.html Board cubie2-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.258744] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.266248] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.272140] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.281110] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.290128] scsi0 : ahci_platform [ 1.293859] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.302552] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.308200] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.316272] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328747] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335812] hub 1-0:1.0: USB hub found [ 1.339658] hub 1-0:1.0: 1 port detected [ 1.344723] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.350394] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.358339] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373732] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380750] hub 2-0:1.0: USB hub found [ 1.384586] hub 2-0:1.0: 1 port detected [ 1.389613] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.396302] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.404190] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468572] hub 3-0:1.0: USB hub found [ 1.472410] hub 3-0:1.0: 1 port detected [ 1.477417] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.484135] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491979] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.553530] hub 4-0:1.0: USB hub found [ 1.557370] hub 4-0:1.0: 1 port detected [ 1.562012] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.649645] No MAC Management Counters available [ 1.654418] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.661041] IP-Config: Failed to open eth0 [ 1.665167] IP-Config: No network devices available [ 1.670063] vcc3v3: disabling [ 1.673028] vcc3v0: disabling [ 1.676103] ALSA device list: [ 1.679080] No soundcards found. [ 1.683237] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.258243] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.265750] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 1.271638] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.280606] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 1.289600] scsi0 : ahci_platform [ 1.293325] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.302044] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.307693] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.315768] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.328243] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.335286] hub 1-0:1.0: USB hub found [ 1.339142] hub 1-0:1.0: 1 port detected [ 1.344188] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.349858] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.357799] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.373226] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.380251] hub 2-0:1.0: USB hub found [ 1.384079] hub 2-0:1.0: 1 port detected [ 1.389086] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.395770] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.403654] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.468108] hub 3-0:1.0: USB hub found [ 1.471962] hub 3-0:1.0: 1 port detected [ 1.476959] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.483676] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.491517] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.553036] hub 4-0:1.0: USB hub found [ 1.556880] hub 4-0:1.0: 1 port detected [ 1.561524] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.649097] No MAC Management Counters available [ 1.653868] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.660498] IP-Config: Failed to open eth0 [ 1.664620] IP-Config: No network devices available [ 1.669508] vcc3v3: disabling [ 1.672474] vcc3v0: disabling [ 1.675552] ALSA device list: [ 1.678529] No soundcards found. [ 1.682655] ata1: SATA link down (SStatus 0 SControl 300) ~$off # PYBOOT: Exception: timeout Board cubie2-sunxi_defconfig failure log: ------------------------------------------------- [ 0.889799] usb1-vbus: 5000 mV [ 0.893236] usb2-vbus: 5000 mV [ 0.965164] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 0.972648] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 0.978544] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.987512] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 0.996415] scsi0 : ahci_platform [ 1.000052] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.008268] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.013867] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.021716] ehci-platform 1c14000.usb: irq 71, io mem 0x01c14000 [ 1.045186] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.052156] hub 1-0:1.0: USB hub found [ 1.055998] hub 1-0:1.0: 1 port detected [ 1.060472] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.066112] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.073950] ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000 [ 1.095128] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.102005] hub 2-0:1.0: USB hub found [ 1.105831] hub 2-0:1.0: 1 port detected [ 1.110277] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.116950] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.124764] ohci-platform 1c14400.usb: irq 96, io mem 0x01c14400 [ 1.189943] hub 3-0:1.0: USB hub found [ 1.193731] hub 3-0:1.0: 1 port detected [ 1.198226] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.204859] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.212718] ohci-platform 1c1c400.usb: irq 97, io mem 0x01c1c400 [ 1.279942] hub 4-0:1.0: USB hub found [ 1.283739] hub 4-0:1.0: 1 port detected [ 1.288088] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:13 UTC (13) [ 1.375154] ata1: SATA link down (SStatus 0 SControl 300) [ 1.391457] No MAC Management Counters available [ 1.396226] stmmac_open: ERROR: allocating the WoL IRQ -61 (-22) [ 1.402817] IP-Config: Failed to open eth0 [ 1.406939] IP-Config: No network devices available [ 1.411817] vcc3v3: disabling [ 1.414781] vcc3v0: disabling ~$off # PYBOOT: Exception: timeout Board cubox-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.233472] SPEAr-ehci: EHCI SPEAr driver [ 1.237578] tegra-ehci: Tegra EHCI driver [ 1.241701] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.247878] ohci-pci: OHCI PCI platform driver [ 1.252375] ohci-platform: OHCI generic platform driver [ 1.257679] ohci-omap3: OHCI OMAP3 driver [ 1.261769] SPEAr-ohci: OHCI SPEAr driver [ 1.266477] usbcore: registered new interface driver usb-storage [ 1.273864] mousedev: PS/2 mouse device common for all mice [ 1.280751] rtc-mv f10d8500.real-time-clock: rtc core: registered f10d8500.real-time- as rtc0 [ 1.289997] i2c /dev entries driver [ 1.296103] usbcore: registered new interface driver uvcvideo [ 1.301858] USB Video Class driver (1.1.1) [ 1.305953] gspca_main: v2.14.0 registered [ 1.313030] orion_wdt: Initial timeout 25 sec [ 1.318400] sdhci: Secure Digital Host Controller Interface driver [ 1.324563] sdhci: Copyright(c) Pierre Ossman [ 1.329541] Synopsys Designware Multimedia Card Interface Driver [ 1.335883] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.342234] usbcore: registered new interface driver usbhid [ 1.347795] usbhid: USB HID core driver [ 1.352629] ata1: SATA link down (SStatus 0 SControl F300) [ 1.360406] TCP: cubic registered [ 1.363748] NET: Registered protocol family 17 [ 1.368201] can: controller area network core (rev 20120528 abi 9) [ 1.374434] NET: Registered protocol family 29 [ 1.378874] can: raw protocol (rev 20120528) [ 1.383118] can: broadcast manager protocol (rev 20120528 t) [ 1.388770] can: netlink gateway (rev 20130117) max_hops=1 [ 1.394626] Key type dns_resolver registered [ 1.399078] ThumbEE CPU extension supported. [ 1.403352] Registering SWP/SWPB emulation handler [ 1.408115] PJ4 iWMMXt v2 coprocessor enabled. [ 1.413631] USB Power: 5000 mV [ 1.417132] rtc-mv f10d8500.real-time-clock: setting system clock to 2014-06-04 18:26:06 UTC (1401906366) [ 1.427590] ALSA device list: [ 1.430565] No soundcards found. [ 1.434489] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 47.642601] can: raw protocol (rev 20120528) [ 47.642604] can: broadcast manager protocol (rev 20120528 t) [ 47.642611] can: netlink gateway (rev 20130117) max_hops=1 [ 47.642910] Key type dns_resolver registered [ 47.642984] omap_vc_init_channel: No PMIC info for vdd_core [ 47.642986] omap_vp_init: No PMIC info for vdd_core [ 47.642990] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.642993] omap_vp_init: No PMIC info for vdd_mm [ 47.642996] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.642998] omap_vp_init: No PMIC info for vdd_mpu [ 47.643302] ThumbEE CPU extension supported. [ 47.643312] Registering SWP/SWPB emulation handler [ 47.714660] palmas 0-0048: Irq flag is 0x00000000 [ 47.720561] mmc0: new high speed MMC card at address 0001 [ 47.726454] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.731294] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.737589] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.744446] mmcblk0: unknown partition table [ 47.749761] mmcblk0boot1: unknown partition table [ 47.755411] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.760794] mmcblk0boot0: unknown partition table [ 47.768146] smps123: 600 <--> 1500 mV at 1060 mV [ 47.774249] smps45: 600 <--> 1310 mV at 1030 mV [ 47.780661] smps6: 1200 mV [ 47.784659] smps7: 1800 mV [ 47.788765] smps8: 600 <--> 1310 mV at 1040 mV [ 47.794498] smps9: failed to get the current voltage [ 47.799738] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.811798] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.937031] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.082041] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.088124] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.095563] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.102423] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.110112] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.123497] ALSA device list: [ 48.126594] No soundcards found. [ 48.130692] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-multi_v7_defconfig failure log: ------------------------------------------------- [ 48.081101] can: raw protocol (rev 20120528) [ 48.081104] can: broadcast manager protocol (rev 20120528 t) [ 48.081111] can: netlink gateway (rev 20130117) max_hops=1 [ 48.081386] Key type dns_resolver registered [ 48.081454] omap_vc_init_channel: No PMIC info for vdd_core [ 48.081457] omap_vp_init: No PMIC info for vdd_core [ 48.081461] omap_vc_init_channel: No PMIC info for vdd_mm [ 48.081463] omap_vp_init: No PMIC info for vdd_mm [ 48.081466] omap_vc_init_channel: No PMIC info for vdd_mpu [ 48.081468] omap_vp_init: No PMIC info for vdd_mpu [ 48.081771] ThumbEE CPU extension supported. [ 48.081780] Registering SWP/SWPB emulation handler [ 48.152838] palmas 0-0048: Irq flag is 0x00000000 [ 48.159227] mmc0: new high speed MMC card at address 0001 [ 48.165132] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 48.169966] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 48.176244] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 48.183110] mmcblk0: unknown partition table [ 48.188454] mmcblk0boot1: unknown partition table [ 48.193634] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 48.199452] mmcblk0boot0: unknown partition table [ 48.205645] smps123: 600 <--> 1500 mV at 1060 mV [ 48.211831] smps45: 600 <--> 1310 mV at 1030 mV [ 48.218252] smps6: 1200 mV [ 48.222231] smps7: 1800 mV [ 48.226384] smps8: 600 <--> 1310 mV at 1040 mV [ 48.232129] smps9: failed to get the current voltage [ 48.237369] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 48.249430] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 48.375523] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 48.382652] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 48.388724] platform 4a140000.sata: Driver ahci requests probe deferral [ 48.396156] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 48.403002] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 48.410673] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.424011] ALSA device list: [ 48.427119] No soundcards found. [ 48.431108] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board omap5uevm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.560535] NET: Registered protocol family 15 [ 2.560711] Key type dns_resolver registered [ 2.560803] omap_vc_init_channel: No PMIC info for vdd_core [ 2.560806] omap_vp_init: No PMIC info for vdd_core [ 2.560814] omap_vc_init_channel: No PMIC info for vdd_mm [ 2.560817] omap_vp_init: No PMIC info for vdd_mm [ 2.560825] omap_vc_init_channel: No PMIC info for vdd_mpu [ 2.560827] omap_vp_init: No PMIC info for vdd_mpu [ 2.561365] ThumbEE CPU extension supported. [ 2.561381] Registering SWP/SWPB emulation handler [ 2.561385] SmartReflex Class3 initialized [ 2.663153] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 2.671121] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 2.677675] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.679415] palmas 0-0048: Irq flag is 0x00000000 [ 2.691453] mmcblk0: unknown partition table [ 2.697846] mmcblk0boot1: unknown partition table [ 2.704573] mmcblk0boot0: unknown partition table [ 2.710550] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.760901] smps123: 600 <--> 1500 mV at 1060 mV [ 2.767980] smps45: 600 <--> 1310 mV at 1030 mV [ 2.775347] smps6: 1200 mV [ 2.780025] smps7: 1800 mV [ 2.784969] smps8: 600 <--> 1310 mV at 1040 mV [ 2.791435] smps9: failed to get the current voltage [ 2.797422] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.811722] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.820549] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.827567] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.833612] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.842730] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.852065] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.859004] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.867490] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.876117] sr_init: No PMIC hook to init smartreflex [ 2.881638] sr_init: platform driver register failed for SR [ 2.909809] pbias_mmc_omap5: disabling [ 2.915275] Waiting for root device /dev/mmcblk1p2... ~$off # PYBOOT: Exception: timeout Board snowball-u8500_defconfig failure log: ------------------------------------------------- [ 3.597808] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.605712] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.617645] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.624969] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.636444] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.644958] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.656890] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.664215] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.675689] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.683502] HS USB OTG: no transceiver configured [ 3.688201] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.696044] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.703979] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.715911] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.723236] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.734710] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.743225] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.755157] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.762481] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.773956] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.781768] HS USB OTG: no transceiver configured [ 3.786468] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.794311] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.802246] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.814147] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.821472] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.832946] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.841491] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.853424] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.860748] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.872222] musb-hdrc musb-hdrc.25.auto: Error applying setting, reverse things back [ 3.880004] HS USB OTG: no transceiver configured [ 3.884735] musb-hdrc musb-hdrc.25.auto: musb_init_controller failed with status -517 [ 3.892578] platform musb-hdrc.25.auto: Driver musb-hdrc requests probe deferral [ 3.900512] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto [ 3.912445] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.25.auto) status -22 [ 3.919738] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.931213] musb-ux500 musb-hdrc.25.auto: Error applying setting, reverse things back ~$off # PYBOOT: Exception: timeout

10 years, 6 months

mainline build: 16 warnings 0 failures (mainline/v3.15-rc8-5759-gd270506)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: d270506 Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v3.15-rc8-5759-gd270506/ Runtime: 45m 47s Passed: 126 Failed: 0 Warnings: 16 Section mismatches: 18 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 drivers/clk/clk-efm32gg.c:81:189: warning: comparison of distinct pointer types lacks a cast [enabled by default] 1 drivers/mtd/nand/omap2.c:1250:12: warning: 'erased_sector_bitflips' defined but not used [-Wunused-function] 1 drivers/pci/host/pci-mvebu.c:334:5: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'phys_addr_t' [-Wformat=] 1 drivers/tty/serial/samsung.c:1229:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat=] 2 buildall.arm.multi_v5_defconfig.log.passed:warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 && DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) 3 arch/arm/common/scoop.c:185:6: warning: unused variable 'temp' [-Wunused-variable] 3 arch/arm/mach-exynos/exynos.c:211:6: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 4 drivers/spi/spi-rspi.c:633:6: warning: unused variable 'ret' [-Wunused-variable] Section mismatches: 1 integrator_defconfig WARNING: arch/arm/mach-integrator/built-in.o(.data+0x2c4): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 integrator_defconfig WARNING: vmlinux.o(.data+0x1b84): Section mismatch in reference from the variable impd1_driver to the function .init.text:impd1_probe() 1 msm_defconfig WARNING: drivers/built-in.o(.data+0x4994): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/built-in.o(.data+0x34ec): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x154): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 msm_defconfig WARNING: vmlinux.o(.data+0x24ed4): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/built-in.o(.data+0x3dd90): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/built-in.o(.data+0x7438): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4090): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_lpae_defconfig WARNING: vmlinux.o(.data+0x859d0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/built-in.o(.data+0x3dd10): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/built-in.o(.data+0x73f8): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x4050): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 multi_v7_defconfig WARNING: vmlinux.o(.data+0x85410): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/built-in.o(.data+0x70f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/built-in.o(.data+0x3544): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: drivers/tty/serial/built-in.o(.data+0x160): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe() 1 qcom_defconfig WARNING: vmlinux.o(.data+0x1d4f0): Section mismatch in reference from the variable msm_platform_driver to the function .init.text:msm_serial_probe()

10 years, 6 months

← Newer
1
...
29
30
31
32
33
34
35
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2014