Kernel-build-reports April 2016

kernel-build-reports@lists.linaro.org

13 participants
510 discussions

mainline build: 69 warnings 0 failures (mainline/v4.6-rc4-7-g95d0c42)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 95d0c42 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.6-rc4-7-g95d0c42/ Runtime: 58m 31s Passed: 118 Failed: 0 Warnings: 69 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type 3 net/bridge/br_mdb.c:569:4: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast Section mismatches:

8 years, 8 months

mainline boot: 55 passed 25 failed (mainline/v4.6-rc4-7-g95d0c42)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc4-7-g95d0c42/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:31.54 bbb arm-omap2plus_defconfig : FAILED 1:54.86 bbb arm-multi_v7_defconfig : FAILED 1:59.38 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:20.87 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.28 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.77 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:47.42 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:02.52 beaver arm-tegra_defconfig : FAILED 1:44.36 beaver arm-multi_v7_defconfig : FAILED 2:00.68 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:51.70 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.15 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.26 cosmic arm-multi_v7_defconfig : FAILED 2:13.33 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:13.13 dalmore arm-tegra_defconfig : FAILED 1:48.66 dalmore arm-multi_v7_defconfig : FAILED 2:06.64 dalmore arm-multi_lpae_defconfig : FAILED 2:02.54 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.56 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.86 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.39 snowball arm-u8500_defconfig : FAILED 2:00.75 snowball arm-multi_v7_defconfig : FAILED 2:17.62 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.54 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.06 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:13.52 arndale arm-exynos_defconfig : passed 1:31.44 arndale arm-multi_v7_defconfig : passed 1:29.34 arndale arm-multi_lpae_defconfig : passed 1:19.30 capri arm-bcm_defconfig : passed 0:50.62 capri arm-multi_v7_defconfig : passed 0:59.31 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.05 chitra powerpc-pasemi_defconfig : passed 2:10.24 chitra powerpc-ppc64_defconfig : passed 2:02.63 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:29.64 colibri-vf61 arm-multi_v7_defconfig : passed 1:28.81 colibri-vf61 arm-multi_v7_nosmp_defconfig : passed 1:25.26 colombus arm-sunxi_defconfig : passed 2:32.30 colombus arm-multi_v7_defconfig : passed 2:54.62 colombus arm-multi_lpae_defconfig : passed 2:35.89 cubie arm-sunxi_defconfig : passed 0:58.49 cubie arm-multi_v7_defconfig : passed 1:10.93 cubie arm-multi_v7_nosmp_defconfig : passed 0:57.71 cubie2 arm-sunxi_defconfig : passed 0:48.60 cubie2 arm-multi_v7_defconfig : passed 1:05.00 cubie2 arm-multi_lpae_defconfig : passed 0:53.30 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:55.11 cubox arm-multi_v7_defconfig : passed 1:20.96 cubox arm-mvebu_v7_defconfig : passed 1:00.37 cubox arm-multi_v7_nosmp_defconfig : passed 1:22.67 hummingboard arm-imx_v6_v7_defconfig : passed 1:27.05 hummingboard arm-multi_v7_defconfig : passed 1:22.53 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:18.88 jetsontk1 arm-tegra_defconfig : passed 1:35.96 jetsontk1 arm-multi_v7_defconfig : passed 1:43.99 jetsontk1 arm-multi_lpae_defconfig : passed 1:43.52 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:36.33 pandaes arm-omap2plus_defconfig : warnings 1:41.15 pandaes arm-multi_v7_defconfig : passed 1:47.75 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:54.92 pi arm-exynos_defconfig : passed 2:08.96 pi arm-multi_v7_defconfig : passed 2:32.59 pi arm-multi_lpae_defconfig : passed 2:42.92 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.01 pit arm-exynos_defconfig : passed 2:12.91 pit arm-multi_v7_defconfig : passed 2:23.16 pit arm-multi_lpae_defconfig : passed 2:26.87 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.88 seattle arm64-defconfig : warnings 2:14.70 snow arm-exynos_defconfig : passed 2:13.34 snow arm-multi_v7_defconfig : passed 2:26.00 snow arm-multi_lpae_defconfig : passed 1:58.93 socfpga arm-socfpga_defconfig : passed 1:24.35 socfpga arm-multi_v7_defconfig : passed 1:23.40 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:28.17 trimslice arm-tegra_defconfig : passed 2:41.19 trimslice arm-multi_v7_defconfig : passed 1:40.78 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:39.85 wandboard arm-multi_v7_defconfig : passed 1:09.02 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.70 Offline boards: omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.96 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:20.36 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:39.80 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 3:10.07 parallella arm-multi_v7_defconfig : OFFLINE 2:23.18 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.73 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.62 sama5 arm-sama5_defconfig : OFFLINE 2:27.46 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:41.39 seaboard arm-tegra_defconfig : OFFLINE 2:22.24 seaboard arm-multi_v7_defconfig : OFFLINE 2:22.64 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.22 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 0.000000] Linux version 4.6.0-rc4-00007-g95d0c42 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Mon Apr 18 10:56:25 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.072818] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 2.091132] Modules linked in: [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc4-00007-g95d0c42 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [PYBOOT] [arndale 02:28]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:29]: got exception: timeout ~$off [PYBOOT] [arndale 02:30]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.630402] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640609] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647673] usbcore: registered new interface driver usbhid [ 1.653596] usbhid: USB HID core driver [ 1.665543] NET: Registered protocol family 10 [ 1.672116] sit: IPv6 over IPv4 tunneling driver [ 1.678242] NET: Registered protocol family 17 [ 1.683011] can: controller area network core (rev 20120528 abi 9) [ 1.689664] NET: Registered protocol family 29 [ 1.694385] can: raw protocol (rev 20120528) [ 1.698904] can: broadcast manager protocol (rev 20120528 t) [ 1.704897] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711644] Key type dns_resolver registered [ 1.716526] omap_voltage_late_init: Voltage driver support not added [ 1.724799] ThumbEE CPU extension supported. [ 1.729432] Registering SWP/SWPB emulation handler [ 1.772101] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778642] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786408] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795122] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803042] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810866] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818679] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826031] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834748] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842671] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852407] mmc1: new high speed MMC card at address 0001 [ 1.859644] hctosys: unable to open rtc device (rtc0) [ 1.872715] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878745] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885734] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894593] mmcblk1: p1 p2 [ 1.900312] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:57]: got exception: timeout ~$off [PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.320959] sdhci: Secure Digital Host Controller Interface driver [ 1.327490] sdhci: Copyright(c) Pierre Ossman [ 1.333309] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.396110] Synopsys Designware Multimedia Card Interface Driver [ 1.403506] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412731] ledtrig-cpu: registered to indicate activity on CPUs [ 1.419469] usbcore: registered new interface driver usbhid [ 1.425352] usbhid: USB HID core driver [ 1.434982] NET: Registered protocol family 10 [ 1.441450] sit: IPv6 over IPv4 tunneling driver [ 1.447328] NET: Registered protocol family 17 [ 1.452070] can: controller area network core (rev 20120528 abi 9) [ 1.458671] NET: Registered protocol family 29 [ 1.463366] can: raw protocol (rev 20120528) [ 1.467881] can: broadcast manager protocol (rev 20120528 t) [ 1.473859] can: netlink gateway (rev 20130117) max_hops=1 [ 1.480425] Key type dns_resolver registered [ 1.485230] omap_voltage_late_init: Voltage driver support not added [ 1.493030] ThumbEE CPU extension supported. [ 1.505612] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.513190] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.521267] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.529017] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536715] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.544400] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551686] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.559361] hctosys: unable to open rtc device (rtc0) [ 1.570183] Waiting for root device /dev/mmcblk0p2... [ 1.605373] mmc1: new high speed MMC card at address 0001 [ 1.611845] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616917] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.623408] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631854] mmcblk1: p1 p2 [PYBOOT] [bbb 02:18]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 02:19]: got exception: timeout ~$off [PYBOOT] [bbb 02:20]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.053993] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.060110] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.066433] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.073307] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082900] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.092401] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.099415] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142770] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151460] oprofile: using arm/armv7 [ 2.156607] Initializing XFRM netlink socket [ 2.161702] NET: Registered protocol family 10 [ 2.172578] sit: IPv6 over IPv4 tunneling driver [ 2.181371] NET: Registered protocol family 17 [ 2.186309] NET: Registered protocol family 15 [ 2.191548] Key type dns_resolver registered [ 2.196408] omap_voltage_late_init: Voltage driver support not added [ 2.203143] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.211606] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.221871] ThumbEE CPU extension supported. [ 2.226522] Registering SWP/SWPB emulation handler [ 2.231557] SmartReflex Class3 initialized [ 2.301240] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.308530] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.319129] mmc1: new high speed MMC card at address 0001 [ 2.331338] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.339690] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.347503] hctosys: unable to open rtc device (rtc0) [ 2.352958] sr_init: No PMIC hook to init smartreflex [ 2.358617] sr_init: platform driver register failed for SR [ 2.399126] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.407112] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.421439] mmcblk1: p1 p2 [ 2.438936] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:52]: got exception: timeout ~$off [PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.583011] sit: IPv6 over IPv4 tunneling driver [ 1.588317] NET: Registered protocol family 17 [ 1.592981] can: controller area network core (rev 20120528 abi 9) [ 1.599498] NET: Registered protocol family 29 [ 1.604160] can: raw protocol (rev 20120528) [ 1.608641] can: broadcast manager protocol (rev 20120528 t) [ 1.614574] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620606] Key type dns_resolver registered [ 1.625165] omap_voltage_late_init: Voltage driver support not added [ 1.632376] Power Management for TI OMAP4+ devices. [ 1.637665] ThumbEE CPU extension supported. [ 1.642157] Registering SWP/SWPB emulation handler [ 1.648960] palmas 0-0058: Irq flag is 0x00000008 [ 1.672183] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702575] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717252] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724320] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750526] rtc-ds1307 2-006f: SET TIME! [ 1.756267] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762936] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771237] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775840] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784892] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.821123] vdd_3v3: supplied by regen1 [ 1.860977] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.878842] aic_dvdd_fixed: disabling [ 1.883424] ldousb: disabling [ 1.887508] Waiting for root device /dev/mmcblk0p1... [ 1.914582] mmc1: new high speed MMC card at address 0001 [ 1.920558] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.925448] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.931804] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.938664] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:44]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:45]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:46]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.582840] sit: IPv6 over IPv4 tunneling driver [ 1.588148] NET: Registered protocol family 17 [ 1.592813] can: controller area network core (rev 20120528 abi 9) [ 1.599325] NET: Registered protocol family 29 [ 1.603981] can: raw protocol (rev 20120528) [ 1.608462] can: broadcast manager protocol (rev 20120528 t) [ 1.614390] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620424] Key type dns_resolver registered [ 1.624978] omap_voltage_late_init: Voltage driver support not added [ 1.632193] Power Management for TI OMAP4+ devices. [ 1.637500] ThumbEE CPU extension supported. [ 1.641996] Registering SWP/SWPB emulation handler [ 1.648805] palmas 0-0058: Irq flag is 0x00000008 [ 1.672035] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702322] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.716966] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724030] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750375] rtc-ds1307 2-006f: SET TIME! [ 1.756110] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762772] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771077] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775680] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.784746] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.820938] vdd_3v3: supplied by regen1 [ 1.858263] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.876170] aic_dvdd_fixed: disabling [ 1.880889] ldousb: disabling [ 1.884982] Waiting for root device /dev/mmcblk0p1... [ 1.912083] mmc1: new high speed MMC card at address 0001 [ 1.918056] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.922946] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.929301] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.936173] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.463360] sit: IPv6 over IPv4 tunneling driver [ 1.468547] NET: Registered protocol family 17 [ 1.473207] can: controller area network core (rev 20120528 abi 9) [ 1.479706] NET: Registered protocol family 29 [ 1.484358] can: raw protocol (rev 20120528) [ 1.488827] can: broadcast manager protocol (rev 20120528 t) [ 1.494758] can: netlink gateway (rev 20130117) max_hops=1 [ 1.500722] Key type dns_resolver registered [ 1.505274] omap_voltage_late_init: Voltage driver support not added [ 1.512235] Power Management for TI OMAP4+ devices. [ 1.517501] ThumbEE CPU extension supported. [ 1.522088] ata1: SATA link down (SStatus 0 SControl 300) [ 1.529018] palmas 0-0058: Irq flag is 0x00000008 [ 1.554609] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.582314] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.595835] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.602879] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.628167] rtc-ds1307 2-006f: SET TIME! [ 1.633786] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.640453] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.648762] rtc-ds1307 2-006f: 64 bytes nvram [ 1.653338] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.661114] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.693369] vdd_3v3: supplied by regen1 [ 1.724865] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.737733] aic_dvdd_fixed: disabling [ 1.742707] ldousb: disabling [ 1.748494] Waiting for root device /dev/mmcblk0p1... [ 1.794719] mmc1: new high speed MMC card at address 0001 [ 1.800579] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.805430] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.811714] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.818495] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:59]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 02:00]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 02:01]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.165042] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.171920] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.182318] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.187180] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.193493] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.200348] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.209943] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.219448] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.226506] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.273561] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.279851] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.286730] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.296328] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.305825] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.312874] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.319002] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.325317] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.332162] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.341746] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.351250] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.358292] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.364990] vdd_3v3: supplied by regen1 [ 2.403696] hctosys: unable to open rtc device (rtc0) [ 2.408998] sr_init: No PMIC hook to init smartreflex [ 2.414491] sr_init: platform driver register failed for SR [ 2.455331] mmc1: new high speed MMC card at address 0001 [ 2.461125] aic_dvdd_fixed: disabling [ 2.463259] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.463914] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.464566] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.474173] mmcblk1: p1 [ 2.485174] ldousb: disabling [ 2.491090] Waiting for root device /dev/mmcblk0p1... [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.153450] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159037] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166116] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176116] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185527] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191031] vdd_1v8_gen: supplied by vdd_5v_in [ 3.197649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.204267] [drm] No driver support for vblank timestamp query. [ 3.210207] drm drm: No connectors reported connected with modes [ 3.216212] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.241987] Console: switching to colour frame buffer device 128x48 [ 3.254292] drm drm: fb0: frame buffer device [ 3.273402] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282004] usb3_vbus: supplied by vdd_5v_in [ 3.288419] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.294876] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.300286] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.308125] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.323410] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.330271] hub 1-0:1.0: USB hub found [ 3.334043] hub 1-0:1.0: 1 port detected [ 3.338932] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.344341] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.352076] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.363404] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.370174] hub 2-0:1.0: USB hub found [ 3.373944] hub 2-0:1.0: 1 port detected [ 3.382406] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.396022] vdd_sata,avdd_plle: disabling [ 3.400428] usb1_vbus: disabling [ 3.404522] Waiting for root device /dev/mmcblk0p1... [ 3.683412] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.621913] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:58]: got exception: timeout ~$off [PYBOOT] [beaver 02:00]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.122733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128317] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134937] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144928] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154089] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159562] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165199] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171810] [drm] No driver support for vblank timestamp query. [ 3.177739] drm drm: No connectors reported connected with modes [ 3.183738] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203065] Console: switching to colour frame buffer device 128x48 [ 3.214815] drm drm: fb0: frame buffer device [ 3.219251] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227152] usb3_vbus: supplied by vdd_5v_in [ 3.233406] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239853] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245257] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.252976] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267827] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274194] hub 1-0:1.0: USB hub found [ 3.277959] hub 1-0:1.0: 1 port detected [ 3.282613] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295681] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307824] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314096] hub 2-0:1.0: USB hub found [ 3.317853] hub 2-0:1.0: 1 port detected [ 3.325362] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338450] vdd_sata,avdd_plle: disabling [ 3.342836] usb1_vbus: disabling [ 3.346763] Waiting for root device /dev/mmcblk0p1... [ 3.627829] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566390] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 3.434036] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.444037] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.452916] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.458441] vdd_1v8_gen: supplied by vdd_5v_in [ 3.467001] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473630] [drm] No driver support for vblank timestamp query. [ 3.479639] drm drm: No connectors reported connected with modes [ 3.485650] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.512079] Console: switching to colour frame buffer device 128x48 [ 3.523913] drm drm: fb0: frame buffer device [ 3.550902] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.558422] usb3_vbus: supplied by vdd_5v_in [ 3.564528] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570996] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576418] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584399] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.600907] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.608213] hub 1-0:1.0: USB hub found [ 3.612006] hub 1-0:1.0: 1 port detected [ 3.616810] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.622251] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.630124] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.650899] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.658084] hub 2-0:1.0: USB hub found [ 3.661863] hub 2-0:1.0: 1 port detected [ 3.670164] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.688978] vdd_sata,avdd_plle: disabling [ 3.693568] usb1_vbus: disabling [ 3.696994] ALSA device list: [ 3.699950] #0: NVIDIA Tegra Beaver [ 3.704194] Waiting for root device /dev/mmcblk0p1... [ 3.980907] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.984544] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:42]: got exception: timeout ~$off [PYBOOT] [beaver 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Synthesizing the initial hotplug events...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 42.014521] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.029079] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.487534] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 89.870351] eth0: device MAC address fe:99:f2:8f:50:fd [ 90.025462] RX IPC Checksum Offload disabled [ 90.030083] No MAC Management Counters available [ 90.035848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/fe:99:f2:8f:50:fd Sending on LPF/eth0/fe:99:f2:8f:50:fd Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 17 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 [PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 03:18]: got exception: timeout ~$off [PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.450822] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.525058] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.535383] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.609573] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.619898] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.694135] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.704463] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.778649] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.788973] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.863312] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.873632] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.947827] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.958190] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.032570] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.042894] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.117284] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.127606] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.201842] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.212185] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.286521] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.296842] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.371078] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.381398] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.455632] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.465952] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.540141] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.550463] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.624700] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.635024] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.709221] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.719542] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.793790] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.804113] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.082183] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156170] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166243] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240225] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250304] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324285] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334364] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408344] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418422] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492405] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502484] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576472] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586538] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660603] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670675] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744654] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.754728] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.828717] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.838787] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.912773] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.922847] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.996830] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.006924] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.080913] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090985] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164967] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175045] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249026] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259105] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333090] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343165] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417150] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427233] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:11]: got exception: timeout ~$off [PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 13.877540] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.951456] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.961514] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.035430] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.045485] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.119404] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.129458] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.203373] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.213433] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.287351] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.297425] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.371350] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.381412] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.455333] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.465393] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.539306] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.549355] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.623268] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.633318] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.707230] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.717283] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.791194] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.801248] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.875166] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.885228] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.959142] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.969195] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.043112] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.053169] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.127088] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.137150] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.211066] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.221124] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:11]: got exception: timeout ~$off [PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.485096] Key type dns_resolver registered [ 2.491468] ThumbEE CPU extension supported. [ 2.495902] Registering SWP/SWPB emulation handler [ 2.545127] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.551242] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.560189] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.575821] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.582704] [drm] No driver support for vblank timestamp query. [ 2.594103] mmc1: new high speed MMC card at address 0001 [ 2.602419] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.608172] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616145] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.624156] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.634279] mmcblk1: p1 [ 2.760938] Console: switching to colour frame buffer device 240x75 [ 2.847397] drm drm: fb0: frame buffer device [ 2.869876] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.879997] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890638] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896235] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905073] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.919911] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930294] hub 1-0:1.0: USB hub found [ 2.934313] hub 1-0:1.0: 1 port detected [ 2.944334] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.958310] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.020471] dvdd_ts: disabling [ 3.023569] usb1_vbus: disabling [ 3.026927] vdd_cam_1v8_reg: disabling [ 3.034341] Waiting for root device /dev/mmcblk0p1... [ 3.244919] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201785] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.795065] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:00]: got exception: timeout ~$off [PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.485347] Key type dns_resolver registered [ 2.491718] ThumbEE CPU extension supported. [ 2.496136] Registering SWP/SWPB emulation handler [ 2.547955] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.554152] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.562091] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.577824] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.584719] [drm] No driver support for vblank timestamp query. [ 2.598247] mmc1: new high speed MMC card at address 0001 [ 2.607583] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.614288] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.622482] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.629541] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.639224] mmcblk1: p1 [ 2.763160] Console: switching to colour frame buffer device 240x75 [ 2.849621] drm drm: fb0: frame buffer device [ 2.870027] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.880083] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890741] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896337] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905316] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.920062] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930386] hub 1-0:1.0: USB hub found [ 2.934465] hub 1-0:1.0: 1 port detected [ 2.945468] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.959532] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.021491] dvdd_ts: disabling [ 3.024591] usb1_vbus: disabling [ 3.027963] vdd_cam_1v8_reg: disabling [ 3.035544] Waiting for root device /dev/mmcblk0p1... [ 3.245066] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.211966] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.050021] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:04]: got exception: timeout ~$off [PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.037109] can: broadcast manager protocol (rev 20120528 t) [ 2.042866] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049535] Key type dns_resolver registered [ 2.054641] ThumbEE CPU extension supported. [ 2.086698] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.091634] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.101713] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129456] [drm] No driver support for vblank timestamp query. [ 2.292783] Console: switching to colour frame buffer device 240x75 [ 2.380309] drm drm: fb0: frame buffer device [ 2.384994] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.393199] usb2_vbus: supplied by vdd-sys-5v0 [ 2.402134] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407700] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415607] mmc1: new high speed MMC card at address 0001 [ 2.422264] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.427292] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.434017] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.440152] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.446538] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.452676] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.460447] mmcblk1: p1 [ 2.465454] hub 1-0:1.0: USB hub found [ 2.472449] hub 1-0:1.0: 1 port detected [ 2.482143] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.493481] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.533946] dvdd_ts: disabling [ 2.537101] usb1_vbus: disabling [ 2.540382] vdd_cam_1v8_reg: disabling [ 2.545885] Waiting for root device /dev/mmcblk0p1... [ 2.785346] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.739358] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:49]: got exception: timeout ~$off [PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 2.638969] Bluetooth: RFCOMM ver 1.11 [ 2.642942] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.648340] Bluetooth: BNEP socket layer initialized [ 2.653428] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.659429] Bluetooth: HIDP socket layer initialized [ 2.666399] Key type dns_resolver registered [ 2.676016] Registering SWP/SWPB emulation handler [ 2.706461] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.713756] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.722678] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.748076] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.754878] [drm] No driver support for vblank timestamp query. [ 2.932710] Console: switching to colour frame buffer device 240x75 [ 3.019144] drm drm: fb0: frame buffer device [ 3.051573] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.058773] usb2_vbus: supplied by vdd-sys-5v0 [ 3.068228] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.074032] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.083175] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.101835] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.115999] hub 1-0:1.0: USB hub found [ 3.120026] hub 1-0:1.0: 1 port detected [ 3.133842] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.148978] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.245185] dvdd_ts: disabling [ 3.248289] usb1_vbus: disabling [ 3.251673] vdd_cam_1v8_reg: disabling [ 3.256340] ALSA device list: [ 3.259330] #0: NVIDIA Tegra Dalmore [ 3.265265] Waiting for root device /dev/mmcblk0p1... [ 3.441595] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.476166] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.231564] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:46]: got exception: timeout ~$off [PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.650413] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.657975] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.666880] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.698018] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.699270] usbcore: registered new interface driver usbhid [ 1.704432] usbhid: USB HID core driver [ 1.713207] NET: Registered protocol family 10 [ 1.713828] sit: IPv6 over IPv4 tunneling driver [ 1.717060] NET: Registered protocol family 17 [ 1.721076] NET: Registered protocol family 15 [ 1.725531] Key type dns_resolver registered [ 1.729856] Registering SWP/SWPB emulation handler [ 1.735694] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.740269] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.768534] max98090 1-0010: MAX98090 REVID=0x43 [ 1.770797] max98090 1-0010: use default 2.8v micbias [ 1.778041] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.780887] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.786134] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.795617] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.805324] mmc1: new DDR MMC card at address 0001 [ 1.810341] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.814420] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.820079] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.829348] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.835230] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.838036] VDD10_HDMI_1.0V: disabling [ 1.838704] vdd_g3d: disabling [ 1.839348] BUCK8_2.8V: disabling [ 1.840o55] ALSA device list: [ 1.840759] #0: Odroid-U3 [ 1.857673] mmcblk1: p1 p2 [ 1.861982] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:47]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.204783] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.213153] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.265763] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 03:11]: got exception: timeout ~$off [PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.971008] can: controller area network core (rev 20120528 abi 9) [ 1.977325] NET: Registered protocol family 29 [ 1.981842] can: raw protocol (rev 20120528) [ 1.986145] can: broadcast manager protocol (rev 20120528 t) [ 1.991851] can: netlink gateway (rev 20130117) max_hops=1 [ 1.998229] Key type dns_resolver registered [ 2.002868] ThumbEE CPU extension supported. [ 2.007232] Registering SWP/SWPB emulation handler [ 2.015045] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.021820] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.030975] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.037994] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.044982] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.051971] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.053985] mmc3: new high speed MMC card at address 0001 [ 2.054504] mmcblk3: mmc3:0001 3.53 GiB [ 2.054718] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.054901] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.055084] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.065002] mmcblk3: p1 p2 p3 p4 [ 2.094116] db8500-esram12: disabling [ 2.097930] db8500-esram34: disabling [ 2.102447] V-CSI/DSI: disabling [ 2.105865] mmci-reg: disabling [ 2.110382] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.116516] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.122863] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:14]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:15]: got exception: timeout ~$off [PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.903015] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.910522] ledtrig-cpu: registered to indicate activity on CPUs [ 1.916778] usbcore: registered new interface driver usbhid [ 1.922363] usbhid: USB HID core driver [ 1.929626] NET: Registered protocol family 10 [ 1.984954] sit: IPv6 over IPv4 tunneling driver [ 1.990112] NET: Registered protocol family 17 [ 1.994598] can: controller area network core (rev 20120528 abi 9) [ 2.000823] NET: Registered protocol family 29 [ 2.005279] can: raw protocol (rev 20120528) [ 2.009552] can: broadcast manager protocol (rev 20120528 t) [ 2.015197] can: netlink gateway (rev 20130117) max_hops=1 [ 2.021148] Key type dns_resolver registered [ 2.025604] ThumbEE CPU extension supported. [ 2.079956] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.094635] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.103729] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.110717] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.117706] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.124694] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.136444] db8500-esram12: disabling [ 2.184234] db8500-esram34: disabling [ 2.207977] V-CSI/DSI: disabling [ 2.219207] mmci-reg: disabling [ 2.222808] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.228790] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.243957] Waiting for root device /dev/mmcblk0p4... [ 3.047821] mmc3: new high speed MMC card at address 0001 [ 3.059631] mmcblk3: mmc3:0001 3.53 GiB [ 3.069763] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.079284] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.093811] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.100616] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:58]: got exception: timeout ~$off [PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- [ 2.640899] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.651611] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.661529] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.672241] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.695983] NET: Registered protocol family 10 [ 2.701568] sit: IPv6 over IPv4 tunneling driver [ 2.707092] NET: Registered protocol family 17 [ 2.711639] NET: Registered protocol family 35 [ 2.716156] NET: Registered protocol family 37 [ 2.720825] Registering SWP/SWPB emulation handler [ 2.727203] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.733489] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.740112] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.747222] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-30 15:03:48 UTC (954428628) [ 2.756500] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.763488] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.770507] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.777465] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.791229] db8500-esram12: disabling [ 2.794952] db8500-esram34: disabling [ 2.798889] V-CSI/DSI: disabling [ 2.802185] mmci-reg: disabling [ 2.805511] ALSA device list: [ 2.808471] #0: MOP500-card [ 2.811889] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.817810] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.824005] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:58]: got exception: timeout ~$off [PYBOOT] [snowball 01:59]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.076621] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.087780] mmcblk0: error -110 sending status command, retrying y" INIT: Id "1" respawning too[ 20.096655] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.105458] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbinï [ 20.143692] mmcblk0: error -110 sending status command, retrying [ 20.152196] mmcblk0: error -110 sending status command, retrying [ 20.160623] mmcblk0: error -110 sending status command, aborting [ 20.171653] mmcblk0: error -110 sending status command, retrying [ 20.180089] mmcblk0: error -110 sending status command, retrying [ 20.188516] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.199604] mmcblk0: error -110 sending status command, retrying NIT: Id "2" respawning too fast: [ 20.208502] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.217296] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.228468] mmcblk0: error -110 sending status command, retrying NIT: Id "S1" respawning too fast:[ 20.237261] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes [ 20.246124] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: Id "6" respawning to[ 20.261203] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutes [ 20.270070] mmcblk0: error -110 sending status command, retrying [ 20.278918] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.945452] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:57]: got exception: timeout ~$off [PYBOOT] [wandboard 02:58]: Done.

8 years, 8 months

mainline build: 69 warnings 0 failures (mainline/v4.6-rc3-158-g306a63b)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 306a63b Merge tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.6-rc3-158-g306a63b/ Runtime: 58m 29s Passed: 118 Failed: 0 Warnings: 69 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type 3 net/bridge/br_mdb.c:569:4: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast Section mismatches:

8 years, 8 months

next boot: 202 boots: 19 failed, 178 passed with 4 offline, 1 conflict (next-20160418)

by kernelci.org bot

next boot: 202 boots: 19 failed, 178 passed with 4 offline, 1 conflict (next-20160418) Full Boot Summary: https://kernelci.org/boot/all/job/next/kernel/next-20160418/ Full Build Summary: https://kernelci.org/build/next/kernel/next-20160418/ Tree: next Branch: local/master Git Describe: next-20160418 Git Commit: 1bd7a2081d2c7b096f75aa934658e404ccaba5fd Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Tested: 43 unique boards, 12 SoC families, 24 builds out of 137 Boot Failures Detected: https://kernelci.org/boot/?next-20160418&fail arm64: defconfig: juno_rootfs:nfs: 1 failed lab defconfig+CONFIG_LKDTM=y: juno: 1 failed lab arm: multi_v7_defconfig+CONFIG_EFI=y: am335x-boneblack: 2 failed labs imx53-qsrb: 1 failed lab imx6dl-riotboard: 1 failed lab socfpga_cyclone5_socrates: 1 failed lab multi_v7_defconfig: am335x-boneblack: 2 failed labs multi_v7_defconfig+CONFIG_LKDTM=y: am335x-boneblack: 2 failed labs tegra_defconfig: tegra124-jetson-tk1_rootfs:nfs: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: am335x-boneblack: 2 failed labs socfpga_cyclone5_socrates: 1 failed lab multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: am335x-boneblack: 1 failed lab multi_v7_defconfig+CONFIG_SMP=n: am335x-boneblack: 2 failed labs tegra124-jetson-tk1: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: am335x-boneblack: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig: am335x-boneblack_rootfs:nfs: 1 offline lab Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.) arm: multi_v7_defconfig+CONFIG_SMP=n: imx6q-sabrelite: lab-embeddedbits: PASS lab-collabora: FAIL --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next-20160418 build: 1 failures 20 warnings (next-20160418)

by Build bot for Mark Brown

Tree/Branch: next-20160418 Git describe: next-20160418 Commit: 1bd7a2081d Add linux-next specific files for 20160418 Build Time: 87 min 10 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 20 Section Mismatches: 0 Failed defconfigs: arm-allmodconfig Errors: arm-allmodconfig ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allnoconfig 11 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 5 warnings 0 mismatches : arm-multi_v7_defconfig 4 warnings 0 mismatches : x86_64-defconfig 14 warnings 0 mismatches : arm-allmodconfig 6 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings Summary: 20 5 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 5 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 5 ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 5 ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 3 ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 2 ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../kernel/trace/bpf_trace.c:372:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../kernel/trace/bpf_trace.c:354:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: ../net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 1 errors, 14 warnings, 0 section mismatches Errors: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: ../kernel/trace/bpf_trace.c:354:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../kernel/trace/bpf_trace.c:372:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-allnoconfig

8 years, 8 months

next build: 137 builds: 3 failed, 134 passed, 3 errors, 354 warnings (next-20160418)

by kernelci.org bot

next build: 137 builds: 3 failed, 134 passed, 3 errors, 354 warnings (next-20160418) Full Build Summary: https://kernelci.org/build/next/kernel/next-20160418/ Tree: next Branch: local/master Git Describe: next-20160418 Git Commit: 1bd7a2081d2c7b096f75aa934658e404ccaba5fd Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Built: 3 unique architectures Build Failures Detected: x86: allmodconfig: FAIL allmodconfig+CONFIG_OF=n: FAIL arm: allmodconfig: FAIL Errors and Warnings Detected: arm: allmodconfig: 1 error, 14 warnings axm55xx_defconfig: 1 warning bcm_defconfig: 2 warnings cm_x300_defconfig: 2 warnings corgi_defconfig: 1 warning davinci_all_defconfig: 3 warnings em_x270_defconfig: 2 warnings exynos_defconfig: 2 warnings ezx_defconfig: 2 warnings imote2_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 4 warnings iop13xx_defconfig: 1 warning iop32x_defconfig: 1 warning ixp4xx_defconfig: 1 warning keystone_defconfig: 4 warnings magician_defconfig: 2 warnings mini2440_defconfig: 2 warnings mmp2_defconfig: 2 warnings multi_v5_defconfig: 2 warnings multi_v7_defconfig: 18 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 18 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 18 warnings multi_v7_defconfig+CONFIG_EFI=y: 19 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 18 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 18 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 18 warnings multi_v7_defconfig+CONFIG_SMP=n: 18 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: 18 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 4 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 4 warnings mxs_defconfig: 2 warnings nhk8815_defconfig: 2 warnings omap1_defconfig: 2 warnings pxa3xx_defconfig: 2 warnings pxa_defconfig: 4 warnings qcom_defconfig: 2 warnings raumfeld_defconfig: 2 warnings sama5_defconfig: 2 warnings socfpga_defconfig: 2 warnings spitz_defconfig: 1 warning sunxi_defconfig: 2 warnings tegra_defconfig: 5 warnings tinyconfig: 2 warnings u300_defconfig: 2 warnings u8500_defconfig: 2 warnings vexpress_defconfig: 3 warnings vt8500_v6_v7_defconfig: 9 warnings x86: allmodconfig: 1 error allmodconfig+CONFIG_OF=n: 1 error defconfig+CONFIG_LKDTM=y: 4 warnings defconfig+CONFIG_OF_UNITTEST=y: 4 warnings defconfig+kvm_guest: 5 warnings i386_defconfig: 4 warnings tinyconfig: 4 warnings x86_64_defconfig: 4 warnings arm64: allmodconfig: 11 warnings allnoconfig: 2 warnings defconfig: 7 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 7 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 7 warnings defconfig+CONFIG_LKDTM=y: 7 warnings defconfig+CONFIG_OF_UNITTEST=y: 7 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 7 warnings tinyconfig: 3 warnings Errors summary: 2 elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) 1 ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings summary: 47 drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 37 drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 16 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 16 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 13 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 13 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 11 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 11 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 11 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 11 drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 10 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 6 net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] 6 net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] 6 net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] 6 net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3 net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 mm/page_alloc.c:6222:34: warning: array subscript is below array bounds [-Warray-bounds] 1 kernel/trace/bpf_trace.c:372:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 kernel/trace/bpf_trace.c:354:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 drivers/firmware/efi/arm-init.c:152:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 .config:956:warning: override: NOHIGHMEM changes choice state 1 .config:955:warning: override: SLOB changes choice state 1 .config:953:warning: override: KERNEL_XZ changes choice state 1 .config:921:warning: override: SLOB changes choice state 1 .config:858:warning: override: SLOB changes choice state 1 .config:856:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm) — FAIL, 1 error, 14 warnings, 0 section mismatches Errors: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] kernel/trace/bpf_trace.c:354:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] kernel/trace/bpf_trace.c:372:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/firmware/efi/arm-init.c:152:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:953:warning: override: KERNEL_XZ changes choice state .config:955:warning: override: SLOB changes choice state .config:956:warning: override: NOHIGHMEM changes choice state mm/page_alloc.c:6222:34: warning: array subscript is below array bounds [-Warray-bounds] -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: .config:921:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:856:warning: override: KERNEL_XZ changes choice state .config:858:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 8 months

mainline boot: 210 boots: 6 failed, 201 passed with 3 offline (v4.6-rc4)

by kernelci.org bot

mainline boot: 210 boots: 6 failed, 201 passed with 3 offline (v4.6-rc4) Full Boot Summary: https://kernelci.org/boot/all/job/mainline/kernel/v4.6-rc4/ Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.6-rc4/ Tree: mainline Branch: local/master Git Describe: v4.6-rc4 Git Commit: c3b46c73264b03000d1e18b22f5caf63332547c9 Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Tested: 38 unique boards, 12 SoC families, 25 builds out of 138 Boot Failures Detected: https://kernelci.org/boot/?v4.6-rc4&fail arm: exynos_defconfig: exynos5422-odroidxu3: 1 failed lab multi_v7_defconfig+CONFIG_EFI=y: imx53-qsrb: 1 failed lab imx6dl-riotboard: 1 failed lab socfpga_cyclone5_socrates: 1 failed lab multi_v5_defconfig: imx27-phytec-phycard-s-rdk: 1 failed lab multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: socfpga_cyclone5_socrates: 1 failed lab Offline Platforms: arm: multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: qcom-apq8064-ifc6410: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next build: 170 warnings 1 failures (next/next-20160418)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: 1bd7a20 Add linux-next specific files for 20160418 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20160418/ Runtime: 58m 13s Passed: 117 Failed: 1 Warnings: 170 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm.allmodconfig ------------------------------------------------------------------------------- Errors: arm.allmodconfig: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 kernel/trace/bpf_trace.c:354:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 kernel/trace/bpf_trace.c:372:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type 2 net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] 3 fs/xfs/xfs_aops.c:97:16: warning: unused variable 'blockmask' [-Wunused-variable] 3 net/bridge/br_mdb.c:569:4: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast 16 include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 72 drivers/regulator/core.c:2497) [-Wdeprecated-declarations] Section mismatches:

8 years, 8 months

next boot: 54 passed 24 failed (next/next-20160418)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160418/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 12:08.89 bbb arm-omap2plus_defconfig : FAILED 1:55.45 bbb arm-multi_v7_defconfig : FAILED 0:47.27 bbb arm-multi_v7_nosmp_defconfig : FAILED 0:44.95 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.46 beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:28.09 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:23.99 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 0:52.82 beaver arm-tegra_defconfig : FAILED 1:45.93 beaver arm-multi_v7_defconfig : FAILED 1:56.77 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:49.23 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:22.18 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.52 cosmic arm-multi_v7_defconfig : FAILED 2:19.04 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:03.26 dalmore arm-tegra_defconfig : FAILED 1:51.36 dalmore arm-multi_v7_defconfig : FAILED 1:59.76 dalmore arm-multi_lpae_defconfig : FAILED 2:01.39 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:53.04 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:56.43 pi arm-multi_lpae_defconfig : FAILED 1:55.62 snow arm-multi_v7_nosmp_defconfig : FAILED 13:47.96 snowball arm-multi_v7_defconfig : FAILED 2:11.64 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.04 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:18.55 arndale arm-exynos_defconfig : passed 1:32.44 arndale arm-multi_v7_defconfig : warnings 1:34.11 arndale arm-multi_lpae_defconfig : warnings 1:22.91 capri arm-bcm_defconfig : passed 1:00.14 capri arm-multi_v7_defconfig : warnings 0:51.07 capri arm-multi_v7_nosmp_defconfig : warnings 0:51.93 chitra powerpc-pasemi_defconfig : passed 1:56.19 chitra powerpc-ppc64_defconfig : passed 2:51.74 colibri-vf61 arm-imx_v6_v7_defconfig : passed 1:37.37 colibri-vf61 arm-multi_v7_defconfig : warnings 1:30.55 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:17.05 colombus arm-sunxi_defconfig : passed 2:35.94 colombus arm-multi_v7_defconfig : warnings 2:46.85 colombus arm-multi_lpae_defconfig : warnings 2:31.56 cubie arm-sunxi_defconfig : passed 0:51.26 cubie arm-multi_v7_defconfig : warnings 0:57.06 cubie arm-multi_v7_nosmp_defconfig : warnings 1:12.93 cubie2 arm-sunxi_defconfig : passed 0:50.53 cubie2 arm-multi_v7_defconfig : warnings 0:59.27 cubie2 arm-multi_lpae_defconfig : warnings 1:02.45 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.08 cubox arm-multi_v7_defconfig : warnings 1:04.91 cubox arm-mvebu_v7_defconfig : passed 1:08.28 cubox arm-multi_v7_nosmp_defconfig : warnings 1:08.46 hummingboard arm-imx_v6_v7_defconfig : passed 1:35.69 hummingboard arm-multi_v7_defconfig : warnings 1:26.07 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:13.49 jetsontk1 arm-tegra_defconfig : warnings 1:32.82 jetsontk1 arm-multi_v7_defconfig : warnings 1:36.10 jetsontk1 arm-multi_lpae_defconfig : warnings 1:40.69 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:34.98 pandaes arm-omap2plus_defconfig : warnings 1:44.91 pandaes arm-multi_v7_defconfig : passed 1:45.30 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:44.91 pi arm-exynos_defconfig : passed 2:10.07 pi arm-multi_v7_defconfig : warnings 2:31.50 pi arm-multi_v7_nosmp_defconfig : warnings 2:13.25 pit arm-exynos_defconfig : passed 2:10.86 pit arm-multi_v7_defconfig : warnings 2:19.45 pit arm-multi_lpae_defconfig : warnings 2:20.98 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.59 seattle arm64-defconfig : warnings 2:29.35 snow arm-exynos_defconfig : passed 2:19.78 snow arm-multi_v7_defconfig : warnings 2:02.60 snow arm-multi_lpae_defconfig : warnings 2:01.03 socfpga arm-socfpga_defconfig : warnings 1:14.05 socfpga arm-multi_v7_defconfig : warnings 1:11.69 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:33.40 trimslice arm-multi_v7_defconfig : warnings 1:36.40 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.84 wandboard arm-imx_v6_v7_defconfig : passed 1:18.20 wandboard arm-multi_v7_defconfig : warnings 1:23.21 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:03.62 Offline boards: omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.44 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:17.50 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:24.36 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:24.68 parallella arm-multi_v7_defconfig : OFFLINE 2:24.79 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.98 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.51 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:46.46 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:41.88 sama5 arm-sama5_defconfig : OFFLINE 2:17.02 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.01 seaboard arm-tegra_defconfig : OFFLINE 2:23.32 seaboard arm-multi_v7_defconfig : OFFLINE 2:17.97 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.01 snowball arm-u8500_defconfig : OFFLINE 1:53.90 trimslice arm-tegra_defconfig : OFFLINE 2:22.73 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.602951] console [ttySAC2] enabled [ 1.606785] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.616270] msm_serial: driver initialized [ 1.619658] STMicroelectronics ASC driver initialized [ 1.625615] [drm] Initialized drm 1.1.0 20060810 [ 1.634503] loop: module loaded [ 1.637126] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 1.645620] libphy: Fixed MDIO Bus: probed [ 1.648618] CAN device driver interface [ 1.652971] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.659002] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.666268] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.672221] usbcore: registered new interface driver pegasus [ 1.677862] usbcore: registered new interface driver asix [ 1.683236] usbcore: registered new interface driver ax88179_178a [ 1.689311] usbcore: registered new interface driver cdc_ether [ 1.695140] usbcore: registered new interface driver smsc75xx [ 1.700865] usbcore: registered new interface driver smsc95xx [ 1.706584] usbcore: registered new interface driver net1080 [ 1.712227] usbcore: registered new interface driver cdc_subset [ 1.718127] usbcore: registered new interface driver zaurus [ 1.723702] usbcore: registered new interface driver cdc_ncm [ 1.729966] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.736624] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.743758] exynos-dwc3 usb_dwc3: no suspend clk specified [ 1.749190] usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.755363] usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.763386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.768448] ehci-pci: EHCI PCI platform driver [ 1.772897] ehci-platform: EHCI generic platform driver [ 1.778219] ehci-omap: OMAP-EHCI Host Controller driver [ 1.783368] ehci-orion: EHCI orion driver [ 1.787360] SPEAr-ehci: EHCI SPEAr driver [ 1.791355] ehci-st: EHCI STMicroelectronics driver [ 1.796216] ehci-exynos: EHCI EXYNOS driver [ 1.800474] ehci-atmel: EHCI Atmel dr [PYBOOT] [arndale 12:04]: got exception: maximum recursion depth exceeded ~$off [PYBOOT] [arndale 12:05]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.452559] Stack: (0xdb057dd0 to 0xdb058000) [ 1.457136] 7dc0: 00000001 c0a06900 db0efa10 db0efa10 [ 1.465725] 7de0: 00000000 db37ccc0 c13b2474 db37caa8 c144fc50 db0efa10 00000000 00000000 [ 1.474314] 7e00: e083cd00 00000000 00000000 00000000 00000000 e083c800 e083ca00 00000000 [ 1.482903] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.491492] 7e40: 00000000 00000000 00000000 00000000 db0f08c0 db0efa10 db0efa10 c13b2488 [ 1.500080] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0782700 c07826b4 db0efa10 [ 1.508669] 7e80: c144cf3c c144cf44 c13b2488 c0780e20 00000000 db0efa10 c13b2488 db0efa44 [ 1.517258] 7ea0: c13a3768 c140d000 0000011e c0780f78 00000000 c13b2488 c0780ecc c077f17c [ 1.525848] 7ec0: db01f85c db0d7e34 c13b2488 db4a3400 00000000 c0780418 c0f87cb8 c11a5834 [ 1.534438] 7ee0: c13b2488 c13b2488 c1140868 c11a5834 c140d000 c07817b4 c13b2474 c120bee0 [ 1.543027] 7f00: c1140868 c0301ea0 dfdff4c0 db057f28 c035c290 c0594214 20000000 ffffffff [ 1.551616] 7f20: 00000051 c1336dc0 00000591 c102cc34 c0c1d1dc c035c468 cccccccd 00000000 [ 1.560205] 7f40: c0f9bdbc 00000000 00000006 00000006 c1336da8 00000000 c120bee0 00000006 [ 1.568794] 7f60: c11a5834 c140d000 c140d000 0000011e c11a583c c1100db4 00000006 00000006 [ 1.577382] 7f80: 00000000 c11005a4 00000000 c0b6e494 00000000 00000000 00000000 00000000 [ 1.585971] 7fa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 1.594559] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.603147] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793d25f2 31fc6d5a [ 1.611766] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 1.620087] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 1.629405] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 1.638278] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 1.646868] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 1.655548] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 1.663958] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 1.672559] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 1.681712] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 1.690312] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 1.698265] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.704796] ---[ end trace 78dd65b275c9687a ]--- [ 1.709725] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.709725] [ 1.719324] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.719324] [PYBOOT] [bbb 00:44]: got exception: panic ~$off [PYBOOT] [bbb 00:45]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.224202] Stack: (0xdb057dd0 to 0xdb058000) [ 1.228776] 7dc0: 00000001 00000000 a0000013 db0dda10 [ 1.237362] 7de0: 00000000 c10a5ea4 db351a80 c113ae14 db351c80 db0dda10 0000a1ff 00000000 [ 1.245947] 7e00: e0832d00 00000000 00000000 00000000 00000000 e0832800 e0832a00 00000000 [ 1.254531] 7e20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 4a102000 [ 1.263116] 7e40: 00000000 00000000 00000000 00000000 db0e0000 db0dda10 db0dda10 c10a5eb8 [ 1.271700] 7e60: fffffdfb 00000000 00000000 00000000 00000000 c0700c64 c0700c18 db0dda10 [ 1.280287] 7e80: c11382e0 c11382e8 c10a5eb8 c06ff3cc 00000000 db0dda10 c10a5eb8 db0dda44 [ 1.288872] 7ea0: c1097ea8 c10fe000 000000fc c06ff524 00000000 c10a5eb8 c06ff478 c06fd868 [ 1.297459] 7ec0: db03410c db0cec30 c10a5eb8 db40b400 00000000 c06fe9c4 c0dec1e8 c0f8a830 [ 1.306044] 7ee0: c10a5eb8 c10a5eb8 c0f3897c c0f8a830 c10fe000 c06ffd20 c10a5ea4 c0fed9ec [ 1.314630] 7f00: c0f3897c c0301c48 db004cc0 c112371c db032580 c0b06f44 00000000 00000000 [ 1.323216] 7f20: 0000e000 c042cf28 000004e7 c0e87d94 c0b1c39c c034cd24 00000000 00000000 [ 1.331802] 7f40: c0dfcef0 00000000 00000006 00000006 00000000 00000000 c0fed9ec 00000006 [ 1.340388] 7f60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.348974] 7f80: 00000000 c0f005a4 00000000 c0a90e08 00000000 00000000 00000000 00000000 [ 1.357558] 7fa0: 00000000 c0a90e10 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.366143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.374728] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 793f25f2 33f86d5a [ 1.383344] [<c0813780>] (cpsw_probe) from [<c0700c64>] (platform_drv_probe+0x4c/0xb0) [ 1.391665] [<c0700c64>] (platform_drv_probe) from [<c06ff3cc>] (driver_probe_device+0x214/0x2c0) [ 1.400982] [<c06ff3cc>] (driver_probe_device) from [<c06ff524>] (__driver_attach+0xac/0xb0) [ 1.409842] [<c06ff524>] (__driver_attach) from [<c06fd868>] (bus_for_each_dev+0x6c/0xa0) [ 1.418427] [<c06fd868>] (bus_for_each_dev) from [<c06fe9c4>] (bus_add_driver+0x1a0/0x218) [ 1.427105] [<c06fe9c4>] (bus_add_driver) from [<c06ffd20>] (driver_register+0x78/0xf8) [ 1.435514] [<c06ffd20>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.444111] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.453252] [<c0f00d84>] (kernel_init_freeable) from [<c0a90e10>] (kernel_init+0x8/0x110) [ 1.461844] [<c0a90e10>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.469795] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.476264] ---[ end trace 7e1dbffc38f1ad3e ]--- [ 1.481166] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.481166] [ 1.490756] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.490756] [PYBOOT] [bbb 00:43]: got exception: panic ~$off [PYBOOT] [bbb 00:44]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.089098] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.095229] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.101565] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.108451] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.118060] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.127574] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.134601] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.176391] ledtrig-cpu: registered to indicate activity on CPUs [ 2.185132] oprofile: using arm/armv7 [ 2.190149] Initializing XFRM netlink socket [ 2.195300] NET: Registered protocol family 10 [ 2.206407] sit: IPv6 over IPv4 tunneling driver [ 2.215360] NET: Registered protocol family 17 [ 2.220309] NET: Registered protocol family 15 [ 2.225575] Key type dns_resolver registered [ 2.230496] omap_voltage_late_init: Voltage driver support not added [ 2.237250] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.245801] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.256267] ThumbEE CPU extension supported. [ 2.260803] Registering SWP/SWPB emulation handler [ 2.265901] SmartReflex Class3 initialized [ 2.337284] mmc1: new high speed MMC card at address 0001 [ 2.351603] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.361808] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.371708] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.386708] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.394031] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.406529] mmcblk1: p1 p2 [ 2.414678] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.434739] hctosys: unable to open rtc device (rtc0) [ 2.440268] sr_init: No PMIC hook to init smartreflex [ 2.446116] sr_init: platform driver register failed for SR [ 2.489664] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:53]: got exception: timeout ~$off [PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.004855] df80: 00000000 c11005a4 00000000 c0b6e494 00000000 00000000 00000000 00000000 [ 2.013404] dfa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.021959] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.030513] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.039066] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 2.047342] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 2.056615] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 2.065439] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 2.073996] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 2.082638] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 2.091005] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.099557] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.108648] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 2.117205] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.125120] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.131495] ---[ end trace 8fe418cb8e46a20a ]--- [ 2.136344] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.136344] [ 2.145896] CPU1: stopping [ 2.148731] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.6.0-rc3-next-20160418 #1 [ 2.157749] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.164142] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.172248] [<c030bb08>] (show_stack) from [<c058d8c0>] (dump_stack+0x98/0xac) [ 2.179805] [<c058d8c0>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.187550] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.195476] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.203310] Exception stack(0xee0aff88 to 0xee0affd0) [ 2.208603] ff80: 00000001 00000000 00000000 c031b1c0 c13024a4 00000000 [ 2.217161] ffa0: 00000000 c1210600 c1302504 c130250c c140b229 ee0ae000 2dd8f000 ee0affd8 [ 2.225718] ffc0: c030892c c0308930 60000013 ffffffff [ 2.231005] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.238752] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.247409] [<c0378b98>] (cpu_startup_entry) from [<80301c6c>] (0x80301c6c) [ 2.254707] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.254707] [PYBOOT] [beagleboard-x15 00:22]: got exception: panic ~$off [PYBOOT] [beagleboard-x15 00:23]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.013245] dfa0: 00000000 c0b6e49c 00000000 c0307ef8 00000000 00000000 00000000 00000000 [ 2.021790] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.030336] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 2.038885] [<c08b9898>] (cpsw_probe) from [<c0782700>] (platform_drv_probe+0x4c/0xb0) [ 2.047158] [<c0782700>] (platform_drv_probe) from [<c0780e20>] (driver_probe_device+0x214/0x2c0) [ 2.056434] [<c0780e20>] (driver_probe_device) from [<c0780f78>] (__driver_attach+0xac/0xb0) [ 2.065253] [<c0780f78>] (__driver_attach) from [<c077f17c>] (bus_for_each_dev+0x6c/0xa0) [ 2.073805] [<c077f17c>] (bus_for_each_dev) from [<c0780418>] (bus_add_driver+0x1a0/0x218) [ 2.082434] [<c0780418>] (bus_add_driver) from [<c07817b4>] (driver_register+0x78/0xf8) [ 2.090800] [<c07817b4>] (driver_register) from [<c0301ea0>] (do_one_initcall+0x40/0x170) [ 2.099347] [<c0301ea0>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x15c/0x1fc) [ 2.108437] [<c1100db4>] (kernel_init_freeable) from [<c0b6e49c>] (kernel_init+0x8/0x114) [ 2.116986] [<c0b6e49c>] (kernel_init) from [<c0307ef8>] (ret_from_fork+0x14/0x3c) [ 2.124897] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 2.131262] ---[ end trace 63996b596ac264f7 ]--- [ 2.136103] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.136103] [ 2.145645] CPU0: stopping [ 2.148481] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D W 4.6.0-rc3-next-20160418 #1 [ 2.157496] Hardware name: Generic DRA74X (Flattened Device Tree) [ 2.163886] [<c031046c>] (unwind_backtrace) from [<c030bb08>] (show_stack+0x10/0x14) [ 2.172000] [<c030bb08>] (show_stack) from [<c058d8c0>] (dump_stack+0x98/0xac) [ 2.179564] [<c058d8c0>] (dump_stack) from [<c030ec04>] (handle_IPI+0x16c/0x18c) [ 2.187317] [<c030ec04>] (handle_IPI) from [<c03017ac>] (gic_handle_irq+0x90/0x94) [ 2.195248] [<c03017ac>] (gic_handle_irq) from [<c030c694>] (__irq_svc+0x54/0x70) [ 2.203087] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.208381] 1f40: 00000001 00000000 00000000 c031b1c0 [ 2.216957] 1f60: c13024a4 00000000 00000000 c1210600 c1302504 c130250c c140b229 c1300000 [ 2.225519] 1f80: 2dd83000 c1301fa0 c030892c c0308930 60000013 ffffffff [ 2.232453] [<c030c694>] (__irq_svc) from [<c0308930>] (arch_cpu_idle+0x38/0x3c) [ 2.240202] [<c0308930>] (arch_cpu_idle) from [<c0378b98>] (cpu_startup_entry+0x1bc/0x220) [ 2.248864] [<c0378b98>] (cpu_startup_entry) from [<c1100c4c>] (start_kernel+0x370/0x37c) [ 2.257430] [<c1100c4c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.264269] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.264269] [PYBOOT] [beagleboard-x15 00:25]: got exception: panic ~$off [PYBOOT] [beagleboard-x15 00:27]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.736388] Stack: (0xee07fdd0 to 0xee080000) [ 1.740936] fdc0: 00000002 00000000 a0000053 ee188410 [ 1.749481] fde0: 00000000 c10a5ea4 ee479280 c113ae14 ee479480 ee188410 0000a1ff 00000000 [ 1.758030] fe00: fa484d00 00000000 00000000 00000000 00000000 fa484800 fa484a00 00000000 [ 1.766583] fe20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 48486000 [ 1.775133] fe40: 00000000 00000000 00000000 00000000 ee1892d0 ee188410 ee188410 c10a5eb8 [ 1.783679] fe60: fffffdfb 00000000 00000000 00000000 00000000 c0700c64 c0700c18 ee188410 [ 1.792230] fe80: c11382e0 c11382e8 c10a5eb8 c06ff3cc 00000000 ee188410 c10a5eb8 ee188444 [ 1.800784] fea0: c1097ea8 c10fe000 000000fc c06ff524 00000000 c10a5eb8 c06ff478 c06fd868 [ 1.809332] fec0: ee05934c ee1846b0 c10a5eb8 ee552f00 00000000 c06fe9c4 c0dec1e8 c0f8a830 [ 1.817879] fee0: c10a5eb8 c10a5eb8 c0f3897c c0f8a830 c10fe000 c06ffd20 c10a5ea4 c0fed9ec [ 1.826425] ff00: c0f3897c c0301c48 ee004f00 c112371c ee055e00 c0b06f44 00000000 00000000 [ 1.834972] ff20: 0000e000 c042cf28 000004e7 c0e87d94 c0b1c39c c034cd24 00000000 00000000 [ 1.843524] ff40: c0dfcef0 00000000 00000006 00000006 00000000 00000000 c0fed9ec 00000006 [ 1.852068] ff60: c0f8a830 c10fe000 c10fe000 000000fc c0f8a838 c0f00d84 00000006 00000006 [ 1.860620] ff80: 00000000 c0f005a4 00000000 c0a90e08 00000000 00000000 00000000 00000000 [ 1.869173] ffa0: 00000000 c0a90e10 00000000 c0307b58 00000000 00000000 00000000 00000000 [ 1.877715] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.886267] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff 00000000 [ 1.894830] [<c0813780>] (cpsw_probe) from [<c0700c64>] (platform_drv_probe+0x4c/0xb0) [ 1.903108] [<c0700c64>] (platform_drv_probe) from [<c06ff3cc>] (driver_probe_device+0x214/0x2c0) [ 1.912396] [<c06ff3cc>] (driver_probe_device) from [<c06ff524>] (__driver_attach+0xac/0xb0) [ 1.921227] [<c06ff524>] (__driver_attach) from [<c06fd868>] (bus_for_each_dev+0x6c/0xa0) [ 1.929775] [<c06fd868>] (bus_for_each_dev) from [<c06fe9c4>] (bus_add_driver+0x1a0/0x218) [ 1.938421] [<c06fe9c4>] (bus_add_driver) from [<c06ffd20>] (driver_register+0x78/0xf8) [ 1.946796] [<c06ffd20>] (driver_register) from [<c0301c48>] (do_one_initcall+0x40/0x170) [ 1.955353] [<c0301c48>] (do_one_initcall) from [<c0f00d84>] (kernel_init_freeable+0x138/0x1d8) [ 1.964450] [<c0f00d84>] (kernel_init_freeable) from [<c0a90e10>] (kernel_init+0x8/0x110) [ 1.973005] [<c0a90e10>] (kernel_init) from [<c0307b58>] (ret_from_fork+0x14/0x3c) [ 1.980928] Code: e5837010 e7816000 e2800028 e5832004 (e1d721be) [ 1.987301] ---[ end trace cb88537fdc8fa204 ]--- [ 1.992146] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.992146] [ 2.001705] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.001705] [PYBOOT] [beagleboard-x15 00:50]: got exception: panic ~$off [PYBOOT] [beagleboard-x15 00:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.684781] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.691101] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.697972] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.708379] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.713228] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.719545] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.726393] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.735979] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.745481] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.752541] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.799133] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.805425] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.812296] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.821887] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.831384] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.838429] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.844544] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.850858] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.857698] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.867296] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.876798] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.883836] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.929419] hctosys: unable to open rtc device (rtc0) [ 2.934718] sr_init: No PMIC hook to init smartreflex [ 2.940252] sr_init: platform driver register failed for SR [ 2.986939] aic_dvdd_fixed: disabling [ 2.992201] ldousb: disabling [ 3.000483] Waiting for root device /dev/mmcblk0p1... [ 3.050795] mmc1: new high speed MMC card at address 0001 [ 3.058560] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.063972] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.070789] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.079336] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:44]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.580053] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.586572] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.593444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.599027] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.606132] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.616131] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.628231] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.634845] [drm] No driver support for vblank timestamp query. [ 3.640789] drm drm: No connectors reported connected with modes [ 3.646793] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.673219] Console: switching to colour frame buffer device 128x48 [ 3.685273] drm drm: fb0: frame buffer device [ 3.703769] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.714672] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.721133] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.726545] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.734385] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.748782] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.756020] hub 1-0:1.0: USB hub found [ 3.759798] hub 1-0:1.0: 1 port detected [ 3.764773] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.770186] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.777925] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.793773] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.800931] hub 2-0:1.0: USB hub found [ 3.804701] hub 2-0:1.0: 1 port detected [ 3.813441] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.827009] vdd_sata,avdd_plle: disabling [ 3.831833] usb1_vbus: disabling [ 3.835889] Waiting for root device /dev/mmcblk0p1... [ 4.113778] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.059396] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 76.498777] random: nonblocking pool is initialized [PYBOOT] [beaver 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:54]: got exception: timeout ~$off [PYBOOT] [beaver 01:55]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.472448] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479401] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485917] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492747] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498331] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504942] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514935] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525288] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531907] [drm] No driver support for vblank timestamp query. [ 3.537840] drm drm: No connectors reported connected with modes [ 3.543842] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563216] Console: switching to colour frame buffer device 128x48 [ 3.575003] drm drm: fb0: frame buffer device [ 3.579440] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589314] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595761] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601167] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608891] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622836] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629201] hub 1-0:1.0: USB hub found [ 3.632965] hub 1-0:1.0: 1 port detected [ 3.637616] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643023] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650683] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662833] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669144] hub 2-0:1.0: USB hub found [ 3.672902] hub 2-0:1.0: 1 port detected [ 3.680368] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693574] vdd_sata,avdd_plle: disabling [ 3.697963] usb1_vbus: disabling [ 3.701857] Waiting for root device /dev/mmcblk0p1... [ 3.982838] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921380] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 3.694217] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.701175] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.706779] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.714306] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.724308] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.737216] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.743863] [drm] No driver support for vblank timestamp query. [ 3.749858] drm drm: No connectors reported connected with modes [ 3.755884] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.781648] Console: switching to colour frame buffer device 128x48 [ 3.793466] drm drm: fb0: frame buffer device [ 3.820801] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.830085] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.836563] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.841995] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.849976] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.870797] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.878536] hub 1-0:1.0: USB hub found [ 3.882334] hub 1-0:1.0: 1 port detected [ 3.887164] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.892608] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.900473] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.920793] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.928384] hub 2-0:1.0: USB hub found [ 3.932171] hub 2-0:1.0: 1 port detected [ 3.940418] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.959002] vdd_sata,avdd_plle: disabling [ 3.963512] usb1_vbus: disabling [ 3.966924] ALSA device list: [ 3.969881] #0: NVIDIA Tegra Beaver [ 3.974120] Waiting for root device /dev/mmcblk0p1... [ 4.250798] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.236250] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:44]: got exception: timeout ~$off [PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.845187] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.859538] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.469595] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 89.894207] eth0: device MAC address d6:46:5f:de:6a:b5 [ 90.049913] RX IPC Checksum Offload disabled [ 90.054540] No MAC Management Counters available [ 90.060307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/d6:46:5f:de:6a:b5 Sending on LPF/eth0/d6:46:5f:de:6a:b5 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 [PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 03:19]: got exception: timeout ~$off [PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.458387] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.532621] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.542948] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.617186] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.627508] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.701746] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.712070] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.786329] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.796656] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.870901] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.881232] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.955475] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.965803] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.040009] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.050372] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.124611] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.134930] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.209103] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.219423] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.293654] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.303975] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.378148] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.388469] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.462702] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.473024] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.547259] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.557584] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.631815] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.642138] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.716384] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.726710] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.800944] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.811271] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.188250] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.262225] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.272300] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.346342] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.356408] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.430388] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.440464] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.514436] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.524536] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.598515] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.608579] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.682549] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.692622] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.766599] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.776674] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.850650] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.860725] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.934703] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.944776] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.018753] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.028829] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.102802] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.112878] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.186850] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.196930] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.270902] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.280981] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.354953] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.365032] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.439009] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.449093] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.523052] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.533121] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:16]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:17]: got exception: timeout ~$off [PYBOOT] [cosmic 02:18]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 13.946595] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.020505] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.030558] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.104467] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.114522] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.188429] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.198488] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.272395] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.282452] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.356359] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.366417] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.440335] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.450399] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.524313] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.534367] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.608272] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.618322] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.692225] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.702276] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.776181] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.786241] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.860150] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.870207] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.944117] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.954172] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.028081] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.038136] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.112047] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.122100] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.196013] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.206074] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.279981] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.290040] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:01]: got exception: timeout ~$off [PYBOOT] [cosmic 02:02]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.910744] can: netlink gateway (rev 20130117) max_hops=1 [ 2.917691] Key type dns_resolver registered [ 2.924174] ThumbEE CPU extension supported. [ 2.928565] Registering SWP/SWPB emulation handler [ 2.947699] usb1_vbus: supplied by vdd-sys-5v0 [ 2.958405] usb2_vbus: supplied by vdd-sys-5v0 [ 2.977673] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.998305] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.005089] [drm] No driver support for vblank timestamp query. [ 3.029357] mmc1: new high speed MMC card at address 0001 [ 3.038960] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.047065] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.056955] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.066667] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.076890] mmcblk1: p1 [ 3.185824] Console: switching to colour frame buffer device 240x75 [ 3.273829] drm drm: fb0: frame buffer device [ 3.293778] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.308711] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.314290] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.323069] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.338807] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.349240] hub 1-0:1.0: USB hub found [ 3.353236] hub 1-0:1.0: 1 port detected [ 3.363906] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.378678] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.440326] dvdd_ts: disabling [ 3.443541] usb1_vbus: disabling [ 3.446800] vdd_cam_1v8_reg: disabling [ 3.454364] Waiting for root device /dev/mmcblk0p1... [ 3.668831] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.647661] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.038798] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:59]: got exception: timeout ~$off [PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.910776] can: netlink gateway (rev 20130117) max_hops=1 [ 2.917821] Key type dns_resolver registered [ 2.924326] ThumbEE CPU extension supported. [ 2.928713] Registering SWP/SWPB emulation handler [ 2.946769] usb1_vbus: supplied by vdd-sys-5v0 [ 2.957317] usb2_vbus: supplied by vdd-sys-5v0 [ 2.977928] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.000813] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.007560] [drm] No driver support for vblank timestamp query. [ 3.029844] mmc1: new high speed MMC card at address 0001 [ 3.039727] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.046835] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.055352] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.064827] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.075552] mmcblk1: p1 [ 3.188323] Console: switching to colour frame buffer device 240x75 [ 3.275529] drm drm: fb0: frame buffer device [ 3.293857] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.308860] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.314440] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.323240] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.338871] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.349420] hub 1-0:1.0: USB hub found [ 3.353414] hub 1-0:1.0: 1 port detected [ 3.364067] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.377847] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.440377] dvdd_ts: disabling [ 3.443597] usb1_vbus: disabling [ 3.446856] vdd_cam_1v8_reg: disabling [ 3.454281] Waiting for root device /dev/mmcblk0p1... [ 3.668893] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.652392] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.523856] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:58]: got exception: timeout ~$off [PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.426617] can: raw protocol (rev 20120528) [ 2.430936] can: broadcast manager protocol (rev 20120528 t) [ 2.436654] can: netlink gateway (rev 20130117) max_hops=1 [ 2.443203] Key type dns_resolver registered [ 2.448208] ThumbEE CPU extension supported. [ 2.470199] usb1_vbus: supplied by vdd-sys-5v0 [ 2.478520] usb2_vbus: supplied by vdd-sys-5v0 [ 2.492770] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.518339] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.525022] [drm] No driver support for vblank timestamp query. [ 2.689912] Console: switching to colour frame buffer device 240x75 [ 2.778437] drm drm: fb0: frame buffer device [ 2.783167] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.793937] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.799488] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.807878] mmc1: new high speed MMC card at address 0001 [ 2.814410] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.820733] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.825567] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.831895] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.840237] hub 1-0:1.0: USB hub found [ 2.844387] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.850616] hub 1-0:1.0: 1 port detected [ 2.858069] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.864982] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.872864] mmcblk1: p1 [ 2.879381] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.920357] dvdd_ts: disabling [ 2.923515] usb1_vbus: disabling [ 2.926832] vdd_cam_1v8_reg: disabling [ 2.932173] Waiting for root device /dev/mmcblk0p1... [ 3.160688] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.113012] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:51]: got exception: timeout ~$off [PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 2.916335] Bluetooth: RFCOMM socket layer initialized [ 2.921583] Bluetooth: RFCOMM ver 1.11 [ 2.925494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.930890] Bluetooth: BNEP socket layer initialized [ 2.935943] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.941943] Bluetooth: HIDP socket layer initialized [ 2.948803] Key type dns_resolver registered [ 2.958269] Registering SWP/SWPB emulation handler [ 2.975105] usb1_vbus: supplied by vdd-sys-5v0 [ 2.984594] usb2_vbus: supplied by vdd-sys-5v0 [ 3.000531] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.027998] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.034649] [drm] No driver support for vblank timestamp query. [ 3.212776] Console: switching to colour frame buffer device 240x75 [ 3.299308] drm drm: fb0: frame buffer device [ 3.325608] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.334837] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.340692] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.349948] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.375617] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.389233] hub 1-0:1.0: USB hub found [ 3.393187] hub 1-0:1.0: 1 port detected [ 3.406819] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.422018] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.515544] dvdd_ts: disabling [ 3.518660] usb1_vbus: disabling [ 3.521924] vdd_cam_1v8_reg: disabling [ 3.526649] ALSA device list: [ 3.529643] #0: NVIDIA Tegra Dalmore [ 3.535677] Waiting for root device /dev/mmcblk0p1... [ 3.715611] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.749647] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.505574] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:49]: got exception: timeout ~$off [PYBOOT] [dalmore 01:50]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.746700] usbcore: registered new interface driver usbhid [ 1.748791] usbhid: USB HID core driver [ 1.756606] NET: Registered protocol family 10 [ 1.757514] sit: IPv6 over IPv4 tunneling driver [ 1.762068] NET: Registered protocol family 17 [ 1.766057] NET: Registered protocol family 15 [ 1.771519] Key type dns_resolver registered [ 1.776831] Registering SWP/SWPB emulation handler [ 1.780630] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.785246] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.806344] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.810596] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.813165] max98090 1-0010: MAX98090 REVID=0x43 [ 1.815396] max98090 1-0010: use default 2.8v micbias [ 1.827971] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.827977] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.828578] hub 1-3:1.0: USB hub found [ 1.828714] hub 1-3:1.0: 3 ports detected [ 1.844409] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.858272] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.864617] mmc1: new DDR MMC card at address 0001 [ 1.869486] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.873748] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.879610] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.885513] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.892058] mmcblk1: p1 p2 [ 1.897377] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.918709] VDD10_HDMI_1.0V: disabling [ 1.919411] vdd_g3d: disabling [ 1.920478] BUCK8_2.8V: disabling [ 1.924455] ALSA device list: [ 1.926095] #0: Odroid-U3 [ 1.929835] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:55]: Done. Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.638031] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644387] isl29018 7-0044: Failed to read 1: -6 [ 1.648971] isl29018 7-0044: regmap initialization fails: -6 [ 1.659259] NET: Registered protocol family 10 [ 1.663670] sit: IPv6 over IPv4 tunneling driver [ 1.667264] NET: Registered protocol family 17 [ 1.671262] can: controller area network core (rev 20120528 abi 9) [ 1.677451] NET: Registered protocol family 29 [ 1.681840] can: raw protocol (rev 20120528) [ 1.686090] can: broadcast manager protocol (rev 20120528 t) [ 1.691732] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697451] Key type dns_resolver registered [ 1.701767] ThumbEE CPU extension supported. [ 1.705681] Registering SWP/SWPB emulation handler [ 1.714865] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720350] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726710] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.732084] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.742153] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751768] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.757200] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767407] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773580] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778957] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788676] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810855] Waiting for root device /dev/mmcblk0p1... [ 1.814736] mmc0: tuning execution failed: -5 [ 1.818787] mmc0: error -5 whilst initialising MMC card [ 2.688033] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.701423] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.706883] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.713253] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.718637] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:54]: got exception: timeout ~$off [PYBOOT] [pi 01:55]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 0.056188] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.056195] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057179] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 [ 0.057184] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 0.057492] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057497] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.057795] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 [ 0.057800] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 0.059256] P1.8V_LDO_OUT2: Bringing 1500000uV into 1800000-1800000uV [ 0.093335] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.094396] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 [ 0.094530] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 [ 0.094658] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 [ 0.094783] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 [ 1.157151] console [ttySAC3] enabled [ 1.161322] msm_serial: driver initialized [ 1.164960] STMicroelectronics ASC driver initialized [ 1.170615] [drm] Initialized drm 1.1.0 20060810 [ 1.178119] loop: module loaded [ 1.182442] libphy: Fixed MDIO Bus: probed [ 1.185312] CAN device driver interface [ 1.189489] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 1.195819] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.202506] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.208774] usbcore: registered new interface driver pegasus [ 1.214415] usbcore: registered new interface driver asix [ 1.219790] usbcore: registered new interface driver ax88179_178a [ 1.225867] usbcore: registered new interface driver cdc_ether [ 1.231689] usbcore: registered new interface driver smsc75xx [ 1.237422] usbcore: registered new interface driver smsc95xx [ 1.243143] usbcore: registered new interface driver net1080 [ 1.248782] usbcore: registered new interface driver cdc_subset [ 1.254684] usbcore: registered new interface driver zaurus [ 1.260253] usbcore: registered new interface driver cdc_ncm [ 1.266324] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.273148] usb_phy_generic.1.auto supply vcc not fo [PYBOOT] [snow 13:43]: got exception: maximum recursion depth exceeded ~$off [PYBOOT] [snow 13:44]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.016021] ledtrig-cpu: registered to indicate activity on CPUs [ 2.022521] usbcore: registered new interface driver usbhid [ 2.028106] usbhid: USB HID core driver [ 2.036560] NET: Registered protocol family 10 [ 2.041931] sit: IPv6 over IPv4 tunneling driver [ 2.047180] NET: Registered protocol family 17 [ 2.051666] can: controller area network core (rev 20120528 abi 9) [ 2.057922] NET: Registered protocol family 29 [ 2.062377] can: raw protocol (rev 20120528) [ 2.066650] can: broadcast manager protocol (rev 20120528 t) [ 2.072326] can: netlink gateway (rev 20130117) max_hops=1 [ 2.078338] Key type dns_resolver registered [ 2.082794] ThumbEE CPU extension supported. [ 2.083801] mmc3: new high speed MMC card at address 0001 [ 2.084320] mmcblk3: mmc3:0001 3.53 GiB [ 2.084533] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.084716] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.084899] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.089874] mmcblk3: p1 p2 p3 p4 [ 2.115905] Registering SWP/SWPB emulation handler [ 2.123046] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.129821] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.139038] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.146057] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.153045] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.160034] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.173339] db8500-esram12: disabling [ 2.177337] db8500-esram34: disabling [ 2.181732] V-CSI/DSI: disabling [ 2.185150] mmci-reg: disabling [ 2.189605] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.195739] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.202056] Waiting for root device /dev/mmcblk0p4... [PYBOOT] [snowball 02:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:09]: got exception: timeout ~$off [PYBOOT] [snowball 02:10]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.987945] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.995391] ledtrig-cpu: registered to indicate activity on CPUs [ 2.001708] usbcore: registered new interface driver usbhid [ 2.007293] usbhid: USB HID core driver [ 2.014373] NET: Registered protocol family 10 [ 2.069641] sit: IPv6 over IPv4 tunneling driver [ 2.074798] NET: Registered protocol family 17 [ 2.079284] can: controller area network core (rev 20120528 abi 9) [ 2.085510] NET: Registered protocol family 29 [ 2.089935] can: raw protocol (rev 20120528) [ 2.094207] can: broadcast manager protocol (rev 20120528 t) [ 2.099884] can: netlink gateway (rev 20130117) max_hops=1 [ 2.105773] Key type dns_resolver registered [ 2.110198] ThumbEE CPU extension supported. [ 2.161407] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.174102] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.183166] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.190155] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.197143] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.204132] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.216125] db8500-esram12: disabling [ 2.268920] db8500-esram34: disabling [ 2.290649] V-CSI/DSI: disabling [ 2.298889] mmci-reg: disabling [ 2.302459] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.308410] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.329589] Waiting for root device /dev/mmcblk0p4... [ 3.137786] mmc3: new high speed MMC card at address 0001 [ 3.149627] mmcblk3: mmc3:0001 3.53 GiB [ 3.158782] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.169311] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.183837] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.190643] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:58]: got exception: timeout ~$off [PYBOOT] [snowball 01:59]: Done.

8 years, 8 months

v4.6-rc4 build: 0 failures 7 warnings (v4.6-rc4)

by Build bot for Mark Brown

Tree/Branch: v4.6-rc4 Git describe: v4.6-rc4 Commit: c3b46c7326 Linux 4.6-rc4 Build Time: 86 min 40 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 7 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allnoconfig 7 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 5 warnings 0 mismatches : arm-allmodconfig 4 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 7 5 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 5 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 2 ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-allnoconfig arm-multi_v5_defconfig x86_64-defconfig

8 years, 8 months

← Newer
1
...
23
24
25
26
27
28
29
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2016