Kernel-build-reports April 2016

kernel-build-reports@lists.linaro.org

13 participants
510 discussions

mainline boot: 51 passed 26 failed (mainline/v4.6-rc3-139-g2e57259)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc3-139-g2e57259/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:38.15 bbb arm-omap2plus_defconfig : FAILED 1:54.01 bbb arm-multi_v7_defconfig : FAILED 1:59.23 bbb arm-multi_v7_nosmp_defconfig : FAILED 1:56.97 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.73 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.78 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:52.06 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:54.73 beaver arm-tegra_defconfig : FAILED 1:44.39 beaver arm-multi_v7_defconfig : FAILED 1:53.51 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:49.82 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.71 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.32 cosmic arm-multi_v7_defconfig : FAILED 2:11.01 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:03.43 dalmore arm-tegra_defconfig : FAILED 2:55.40 dalmore arm-multi_v7_defconfig : FAILED 3:11.38 dalmore arm-multi_lpae_defconfig : FAILED 1:53.15 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:51.11 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:57.58 pi arm-multi_v7_defconfig : FAILED 1:57.41 pi arm-multi_lpae_defconfig : FAILED 1:55.02 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.85 snowball arm-u8500_defconfig : FAILED 1:56.65 snowball arm-multi_v7_defconfig : FAILED 2:14.43 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:08.54 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:17.30 arndale arm-exynos_defconfig : passed 1:27.01 arndale arm-multi_v7_defconfig : passed 1:27.69 arndale arm-multi_lpae_defconfig : passed 1:26.92 capri arm-bcm_defconfig : passed 0:47.85 capri arm-multi_v7_defconfig : passed 0:59.31 capri arm-multi_v7_nosmp_defconfig : warnings 0:47.43 chitra powerpc-pasemi_defconfig : passed 2:06.70 chitra powerpc-ppc64_defconfig : passed 2:04.79 colombus arm-sunxi_defconfig : passed 2:26.19 colombus arm-multi_v7_defconfig : passed 2:41.23 colombus arm-multi_lpae_defconfig : passed 2:30.42 cubie arm-sunxi_defconfig : passed 0:57.87 cubie arm-multi_v7_defconfig : passed 0:57.01 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.75 cubie2 arm-sunxi_defconfig : passed 0:48.74 cubie2 arm-multi_v7_defconfig : passed 0:56.16 cubie2 arm-multi_lpae_defconfig : passed 0:58.34 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:10.73 cubox arm-multi_v7_defconfig : passed 1:22.23 cubox arm-mvebu_v7_defconfig : passed 1:08.75 cubox arm-multi_v7_nosmp_defconfig : passed 1:14.71 hummingboard arm-imx_v6_v7_defconfig : passed 1:39.19 hummingboard arm-multi_v7_defconfig : passed 1:14.19 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:13.28 jetsontk1 arm-tegra_defconfig : passed 1:33.73 jetsontk1 arm-multi_v7_defconfig : passed 1:39.63 jetsontk1 arm-multi_lpae_defconfig : passed 1:40.41 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:39.15 pandaes arm-omap2plus_defconfig : warnings 1:47.20 pandaes arm-multi_v7_defconfig : passed 1:44.37 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:11.85 pi arm-exynos_defconfig : passed 2:08.94 pi arm-multi_v7_nosmp_defconfig : warnings 1:42.99 pit arm-exynos_defconfig : passed 2:08.33 pit arm-multi_v7_defconfig : passed 1:51.47 pit arm-multi_lpae_defconfig : passed 1:54.01 pit arm-multi_v7_nosmp_defconfig : warnings 2:52.95 seattle arm64-defconfig : warnings 2:22.09 snow arm-exynos_defconfig : passed 2:15.44 snow arm-multi_v7_defconfig : passed 2:05.43 snow arm-multi_lpae_defconfig : passed 1:58.74 socfpga arm-socfpga_defconfig : passed 1:20.37 socfpga arm-multi_v7_defconfig : passed 1:18.40 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:17.67 trimslice arm-tegra_defconfig : passed 3:04.61 trimslice arm-multi_v7_defconfig : passed 2:57.96 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:38.71 wandboard arm-imx_v6_v7_defconfig : passed 1:29.25 wandboard arm-multi_v7_defconfig : passed 1:12.62 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:16.81 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.50 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.71 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:26.51 omap5uevm arm-omap2plus_defconfig : OFFLINE 1:18.08 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:19.20 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:25.52 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:32.60 parallella arm-multi_v7_defconfig : OFFLINE 2:28.54 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.57 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.31 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:45.02 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:52.58 sama5 arm-sama5_defconfig : OFFLINE 2:14.60 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:32.65 seaboard arm-tegra_defconfig : OFFLINE 2:17.54 seaboard arm-multi_v7_defconfig : OFFLINE 2:32.88 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.90 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 2.025118] [c1038dc0] *pgd=4100041e(bad) [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 2.038050] Modules linked in: [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd420, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-00139-g2e57259 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b474>] (show_stack+0x10/0x14) [ 0.000000] [<c030b474>] (show_stack) from [<c0335db0>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335db0>] (__warn) from [<c0335e00>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335e00>] (warn_slowpath_fmt) from [<c0f040e8>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f040e8>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x8ec) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 [PYBOOT] [arndale 02:35]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:36]: got exception: timeout ~$off [PYBOOT] [arndale 02:37]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.630652] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.640907] ledtrig-cpu: registered to indicate activity on CPUs [ 1.647982] usbcore: registered new interface driver usbhid [ 1.653903] usbhid: USB HID core driver [ 1.665924] NET: Registered protocol family 10 [ 1.672489] sit: IPv6 over IPv4 tunneling driver [ 1.678616] NET: Registered protocol family 17 [ 1.683377] can: controller area network core (rev 20120528 abi 9) [ 1.690011] NET: Registered protocol family 29 [ 1.694728] can: raw protocol (rev 20120528) [ 1.699243] can: broadcast manager protocol (rev 20120528 t) [ 1.705234] can: netlink gateway (rev 20130117) max_hops=1 [ 1.711978] Key type dns_resolver registered [ 1.716868] omap_voltage_late_init: Voltage driver support not added [ 1.725148] ThumbEE CPU extension supported. [ 1.729779] Registering SWP/SWPB emulation handler [ 1.772219] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.778761] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786531] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795234] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803134] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.810958] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.818777] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826126] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834794] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.842723] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852464] mmc1: new high speed MMC card at address 0001 [ 1.859688] hctosys: unable to open rtc device (rtc0) [ 1.872734] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.878750] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.885730] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894589] mmcblk1: p1 p2 [ 1.900297] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:57]: got exception: timeout ~$off [PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.320562] sdhci: Secure Digital Host Controller Interface driver [ 1.327087] sdhci: Copyright(c) Pierre Ossman [ 1.332899] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.395882] Synopsys Designware Multimedia Card Interface Driver [ 1.403279] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.412493] ledtrig-cpu: registered to indicate activity on CPUs [ 1.419235] usbcore: registered new interface driver usbhid [ 1.425120] usbhid: USB HID core driver [ 1.434705] NET: Registered protocol family 10 [ 1.441192] sit: IPv6 over IPv4 tunneling driver [ 1.447060] NET: Registered protocol family 17 [ 1.451801] can: controller area network core (rev 20120528 abi 9) [ 1.458401] NET: Registered protocol family 29 [ 1.463098] can: raw protocol (rev 20120528) [ 1.467611] can: broadcast manager protocol (rev 20120528 t) [ 1.473589] can: netlink gateway (rev 20130117) max_hops=1 [ 1.480148] Key type dns_resolver registered [ 1.484950] omap_voltage_late_init: Voltage driver support not added [ 1.492756] ThumbEE CPU extension supported. [ 1.505360] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.512930] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.521003] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528754] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536453] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.544137] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.551424] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.559096] hctosys: unable to open rtc device (rtc0) [ 1.569904] Waiting for root device /dev/mmcblk0p2... [ 1.605154] mmc1: new high speed MMC card at address 0001 [ 1.611620] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.616696] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.623181] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.631627] mmcblk1: p1 p2 [PYBOOT] [bbb 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:55]: got exception: timeout ~$off [PYBOOT] [bbb 01:56]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.045809] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.051946] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.058292] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.065187] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.074809] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.084335] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.091372] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.134518] ledtrig-cpu: registered to indicate activity on CPUs [ 2.143232] oprofile: using arm/armv7 [ 2.148382] Initializing XFRM netlink socket [ 2.153467] NET: Registered protocol family 10 [ 2.164346] sit: IPv6 over IPv4 tunneling driver [ 2.173112] NET: Registered protocol family 17 [ 2.178060] NET: Registered protocol family 15 [ 2.183316] Key type dns_resolver registered [ 2.188177] omap_voltage_late_init: Voltage driver support not added [ 2.194932] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.203422] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.213697] ThumbEE CPU extension supported. [ 2.218357] Registering SWP/SWPB emulation handler [ 2.223408] SmartReflex Class3 initialized [ 2.292833] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.300169] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.310727] mmc1: new high speed MMC card at address 0001 [ 2.322857] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.331208] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.339041] hctosys: unable to open rtc device (rtc0) [ 2.344492] sr_init: No PMIC hook to init smartreflex [ 2.350164] sr_init: platform driver register failed for SR [ 2.390582] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.398554] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.412864] mmcblk1: p1 p2 [ 2.430266] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:52]: got exception: timeout ~$off [PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.588072] sit: IPv6 over IPv4 tunneling driver [ 1.593373] NET: Registered protocol family 17 [ 1.598040] can: controller area network core (rev 20120528 abi 9) [ 1.604546] NET: Registered protocol family 29 [ 1.609208] can: raw protocol (rev 20120528) [ 1.613679] can: broadcast manager protocol (rev 20120528 t) [ 1.619608] can: netlink gateway (rev 20130117) max_hops=1 [ 1.625648] Key type dns_resolver registered [ 1.630208] omap_voltage_late_init: Voltage driver support not added [ 1.637426] Power Management for TI OMAP4+ devices. [ 1.642724] ThumbEE CPU extension supported. [ 1.647212] Registering SWP/SWPB emulation handler [ 1.654063] palmas 0-0058: Irq flag is 0x00000008 [ 1.677267] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.708223] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.722936] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.730008] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755587] rtc-ds1307 2-006f: SET TIME! [ 1.761309] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.767984] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.776295] rtc-ds1307 2-006f: 64 bytes nvram [ 1.780900] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.789972] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.826176] vdd_3v3: supplied by regen1 [ 1.865111] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.882624] aic_dvdd_fixed: disabling [ 1.887223] ldousb: disabling [ 1.891299] Waiting for root device /dev/mmcblk0p1... [ 1.907299] mmc1: new high speed MMC card at address 0001 [ 1.913266] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.918178] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.924520] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.931397] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:50]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.583157] sit: IPv6 over IPv4 tunneling driver [ 1.588469] NET: Registered protocol family 17 [ 1.593136] can: controller area network core (rev 20120528 abi 9) [ 1.599655] NET: Registered protocol family 29 [ 1.604315] can: raw protocol (rev 20120528) [ 1.608799] can: broadcast manager protocol (rev 20120528 t) [ 1.614732] can: netlink gateway (rev 20130117) max_hops=1 [ 1.620762] Key type dns_resolver registered [ 1.625324] omap_voltage_late_init: Voltage driver support not added [ 1.632545] Power Management for TI OMAP4+ devices. [ 1.637836] ThumbEE CPU extension supported. [ 1.642327] Registering SWP/SWPB emulation handler [ 1.649140] palmas 0-0058: Irq flag is 0x00000008 [ 1.672317] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.702737] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.717434] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724499] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750648] rtc-ds1307 2-006f: SET TIME! [ 1.756394] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763056] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.771360] rtc-ds1307 2-006f: 64 bytes nvram [ 1.775964] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.785035] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.821218] vdd_3v3: supplied by regen1 [ 1.860385] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.877267] aic_dvdd_fixed: disabling [ 1.881281] ldousb: disabling [ 1.885373] Waiting for root device /dev/mmcblk0p1... [ 1.912446] mmc1: new high speed MMC card at address 0001 [ 1.918409] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.923306] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.929641] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.936501] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.462332] sit: IPv6 over IPv4 tunneling driver [ 1.467526] NET: Registered protocol family 17 [ 1.472198] can: controller area network core (rev 20120528 abi 9) [ 1.478707] NET: Registered protocol family 29 [ 1.483369] can: raw protocol (rev 20120528) [ 1.487840] can: broadcast manager protocol (rev 20120528 t) [ 1.493776] can: netlink gateway (rev 20130117) max_hops=1 [ 1.499742] Key type dns_resolver registered [ 1.504297] omap_voltage_late_init: Voltage driver support not added [ 1.511259] Power Management for TI OMAP4+ devices. [ 1.516531] ThumbEE CPU extension supported. [ 1.521104] ata1: SATA link down (SStatus 0 SControl 300) [ 1.528040] palmas 0-0058: Irq flag is 0x00000008 [ 1.553263] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.581006] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.594547] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.601595] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.626817] rtc-ds1307 2-006f: SET TIME! [ 1.632445] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.639120] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 1.647426] rtc-ds1307 2-006f: 64 bytes nvram [ 1.652010] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.659777] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.692027] vdd_3v3: supplied by regen1 [ 1.723508] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.736390] aic_dvdd_fixed: disabling [ 1.741369] ldousb: disabling [ 1.747165] Waiting for root device /dev/mmcblk0p1... [ 1.793410] mmc1: new high speed MMC card at address 0001 [ 1.799274] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.804123] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.810406] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.817185] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.173258] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.180125] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.190525] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.195395] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.201697] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.208562] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.218162] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.227668] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.234726] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283704] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290008] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296881] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306483] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.315989] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323031] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329145] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335459] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342305] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351901] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361409] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368453] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375131] vdd_3v3: supplied by regen1 [ 2.413849] hctosys: unable to open rtc device (rtc0) [ 2.419157] sr_init: No PMIC hook to init smartreflex [ 2.424664] sr_init: platform driver register failed for SR [ 2.470624] aic_dvdd_fixed: disabling [ 2.474858] ldousb: disabling [ 2.484287] Waiting for root device /dev/mmcblk0p1... [ 2.535355] mmc1: new high speed MMC card at address 0001 [ 2.543073] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548378] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555133] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563552] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.153443] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.159027] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.166143] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.176142] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.185572] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.191076] vdd_1v8_gen: supplied by vdd_5v_in [ 3.197298] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.203921] [drm] No driver support for vblank timestamp query. [ 3.209857] drm drm: No connectors reported connected with modes [ 3.215864] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.241473] Console: switching to colour frame buffer device 128x48 [ 3.253742] drm drm: fb0: frame buffer device [ 3.268407] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.277019] usb3_vbus: supplied by vdd_5v_in [ 3.283443] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.289902] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.295312] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.303147] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.318418] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.325263] hub 1-0:1.0: USB hub found [ 3.329034] hub 1-0:1.0: 1 port detected [ 3.333938] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.339351] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.347091] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.358413] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.365166] hub 2-0:1.0: USB hub found [ 3.368934] hub 2-0:1.0: 1 port detected [ 3.378100] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.391641] vdd_sata,avdd_plle: disabling [ 3.396448] usb1_vbus: disabling [ 3.400577] Waiting for root device /dev/mmcblk0p1... [ 3.678418] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.616939] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.122757] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.128340] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.134950] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.144942] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.154107] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.159582] vdd_1v8_gen: supplied by vdd_5v_in [ 3.165251] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.171864] [drm] No driver support for vblank timestamp query. [ 3.177791] drm drm: No connectors reported connected with modes [ 3.183792] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.203125] Console: switching to colour frame buffer device 128x48 [ 3.214905] drm drm: fb0: frame buffer device [ 3.219340] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.227244] usb3_vbus: supplied by vdd_5v_in [ 3.233511] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.239958] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.245361] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.253080] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.267834] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.274195] hub 1-0:1.0: USB hub found [ 3.277960] hub 1-0:1.0: 1 port detected [ 3.282615] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.295680] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.307831] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.314097] hub 2-0:1.0: USB hub found [ 3.317855] hub 2-0:1.0: 1 port detected [ 3.325375] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.338433] vdd_sata,avdd_plle: disabling [ 3.342814] usb1_vbus: disabling [ 3.346760] Waiting for root device /dev/mmcblk0p1... [ 3.627836] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.566387] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:48]: got exception: timeout ~$off [PYBOOT] [beaver 01:49]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 3.434047] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.444051] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.452941] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.458461] vdd_1v8_gen: supplied by vdd_5v_in [ 3.467332] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.473951] [drm] No driver support for vblank timestamp query. [ 3.479952] drm drm: No connectors reported connected with modes [ 3.485963] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.511942] Console: switching to colour frame buffer device 128x48 [ 3.523771] drm drm: fb0: frame buffer device [ 3.550507] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.558025] usb3_vbus: supplied by vdd_5v_in [ 3.564140] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.570607] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.576029] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.584012] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.600516] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.608236] hub 1-0:1.0: USB hub found [ 3.612020] hub 1-0:1.0: 1 port detected [ 3.616837] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.622266] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.630140] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.650509] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.658100] hub 2-0:1.0: USB hub found [ 3.661874] hub 2-0:1.0: 1 port detected [ 3.670230] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.689056] vdd_sata,avdd_plle: disabling [ 3.693482] usb1_vbus: disabling [ 3.696910] ALSA device list: [ 3.699867] #0: NVIDIA Tegra Beaver [ 3.704099] Waiting for root device /dev/mmcblk0p1... [ 3.980513] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.965934] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:42]: got exception: timeout ~$off [PYBOOT] [beaver 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 42.046037] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 42.060377] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.543716] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 89.946387] eth0: device MAC address 4e:c0:fc:da:eb:8a [ 90.101677] RX IPC Checksum Offload disabled [ 90.106305] No MAC Management Counters available [ 90.112114] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/4e:c0:fc:da:eb:8a Sending on LPF/eth0/4e:c0:fc:da:eb:8a Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 [PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 03:18]: got exception: timeout ~$off [PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.455481] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.529674] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.539999] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.614247] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.624637] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.698829] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.709157] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.783404] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.793728] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.867970] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.878304] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.952567] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.962903] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.037173] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.047538] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.121846] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.132170] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.206410] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.216759] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.291038] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.301357] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.375596] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.385944] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.460232] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.470559] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.544805] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.555130] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.629319] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.639641] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.713899] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.724223] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.798464] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.808791] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.061935] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.135921] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.145996] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.219978] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.230056] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.304039] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.314115] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.388095] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.398175] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.472168] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.482254] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.556239] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.566308] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.640295] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.650369] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.724353] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.734428] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.808416] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.818487] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.892475] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.902546] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.976532] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.986607] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.060592] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.070667] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.144697] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.154760] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.228742] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.238822] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.312809] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.322890] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.396868] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.406951] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:09]: got exception: timeout ~$off [PYBOOT] [cosmic 02:10]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 13.881241] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.955160] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.965215] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.039131] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.049188] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.123101] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.133162] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.207073] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.217135] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.291052] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.301127] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.375050] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.385106] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.459023] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.469089] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.543005] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.553056] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.626971] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.637020] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.710932] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.720986] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.794896] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.804950] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.878859] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.888914] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.962822] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.972880] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.046791] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.056845] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.130765] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.140827] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.214739] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.224799] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:01]: got exception: timeout ~$off [PYBOOT] [cosmic 02:03]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.485648] Key type dns_resolver registered [ 2.492044] ThumbEE CPU extension supported. [ 2.496481] Registering SWP/SWPB emulation handler [ 2.544343] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.550707] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.559129] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.574377] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.581154] [drm] No driver support for vblank timestamp query. [ 2.599199] mmc1: new high speed MMC card at address 0001 [ 2.608328] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.614006] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.623819] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.633397] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.644253] mmcblk1: p1 [ 2.762383] Console: switching to colour frame buffer device 240x75 [ 2.848836] drm drm: fb0: frame buffer device [ 2.870111] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.880176] usb2_vbus: supplied by vdd-sys-5v0 [ 2.890844] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.896446] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.905412] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.920147] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.930436] hub 1-0:1.0: USB hub found [ 2.934520] hub 1-0:1.0: 1 port detected [ 2.945381] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.959442] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.021395] dvdd_ts: disabling [ 3.024494] usb1_vbus: disabling [ 3.027865] vdd_cam_1v8_reg: disabling [ 3.035604] Waiting for root device /dev/mmcblk0p1... [ 3.245144] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201966] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.045134] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:51]: got exception: timeout ~$off [PYBOOT] [dalmore 01:52]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.486303] Key type dns_resolver registered [ 2.492683] ThumbEE CPU extension supported. [ 2.497102] Registering SWP/SWPB emulation handler [ 2.528299] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.535491] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.543954] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.558848] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.565599] [drm] No driver support for vblank timestamp query. [ 2.583769] mmc1: new high speed MMC card at address 0001 [ 2.592870] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.601449] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.610069] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617196] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.627730] mmcblk1: p1 [ 2.744465] Console: switching to colour frame buffer device 240x75 [ 2.831374] drm drm: fb0: frame buffer device [ 2.848998] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859039] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870630] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876227] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.884989] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899031] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909289] hub 1-0:1.0: USB hub found [ 2.913293] hub 1-0:1.0: 1 port detected [ 2.923897] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.938244] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000206] dvdd_ts: disabling [ 3.003307] usb1_vbus: disabling [ 3.006676] vdd_cam_1v8_reg: disabling [ 3.014325] Waiting for root device /dev/mmcblk0p1... [ 3.229061] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207346] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.309183] random: nonblocking pool is initialized [PYBOOT] [dalmore 03:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 03:09]: got exception: timeout ~$off [PYBOOT] [dalmore 03:10]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.037143] can: broadcast manager protocol (rev 20120528 t) [ 2.042897] can: netlink gateway (rev 20130117) max_hops=1 [ 2.049579] Key type dns_resolver registered [ 2.054690] ThumbEE CPU extension supported. [ 2.086566] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.091505] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.101586] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.124667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.131353] [drm] No driver support for vblank timestamp query. [ 2.296156] Console: switching to colour frame buffer device 240x75 [ 2.383614] drm drm: fb0: frame buffer device [ 2.388347] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.396553] usb2_vbus: supplied by vdd-sys-5v0 [ 2.404187] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.409745] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.417638] mmc1: new high speed MMC card at address 0001 [ 2.424298] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.429336] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.436063] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.442143] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.448543] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.455373] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.463531] mmcblk1: p1 [ 2.467417] hub 1-0:1.0: USB hub found [ 2.474418] hub 1-0:1.0: 1 port detected [ 2.484121] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.495467] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.527456] dvdd_ts: disabling [ 2.530636] usb1_vbus: disabling [ 2.533884] vdd_cam_1v8_reg: disabling [ 2.539330] Waiting for root device /dev/mmcblk0p1... [ 2.790485] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.743547] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:49]: got exception: timeout ~$off [PYBOOT] [dalmore 01:50]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 2.639413] Bluetooth: RFCOMM ver 1.11 [ 2.643609] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.649008] Bluetooth: BNEP socket layer initialized [ 2.654103] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.660106] Bluetooth: HIDP socket layer initialized [ 2.667049] Key type dns_resolver registered [ 2.676679] Registering SWP/SWPB emulation handler [ 2.702950] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.708225] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.715449] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.737027] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.743799] [drm] No driver support for vblank timestamp query. [ 2.921594] Console: switching to colour frame buffer device 240x75 [ 3.007762] drm drm: fb0: frame buffer device [ 3.042360] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.049587] usb2_vbus: supplied by vdd-sys-5v0 [ 3.058052] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.063866] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.073010] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.092361] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.106404] hub 1-0:1.0: USB hub found [ 3.110452] hub 1-0:1.0: 1 port detected [ 3.124574] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.139677] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.235245] dvdd_ts: disabling [ 3.238348] usb1_vbus: disabling [ 3.241612] vdd_cam_1v8_reg: disabling [ 3.246398] ALSA device list: [ 3.249389] #0: NVIDIA Tegra Dalmore [ 3.255217] Waiting for root device /dev/mmcblk0p1... [ 3.432360] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.458573] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.432321] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:53]: got exception: timeout ~$off [PYBOOT] [dalmore 02:54]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.654767] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.661815] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.692919] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.694150] usbcore: registered new interface driver usbhid [ 1.699340] usbhid: USB HID core driver [ 1.708113] NET: Registered protocol family 10 [ 1.708742] sit: IPv6 over IPv4 tunneling driver [ 1.711974] NET: Registered protocol family 17 [ 1.715982] NET: Registered protocol family 15 [ 1.720438] Key type dns_resolver registered [ 1.724763] Registering SWP/SWPB emulation handler [ 1.738635] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.738746] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.746051] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.765781] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.770076] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.779899] mmc1: new DDR MMC card at address 0001 [ 1.784516] max98090 1-0010: MAX98090 REVID=0x43 [ 1.789426] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.793754] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.799653] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.805588] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.811568] max98090 1-0010: use default 2.8v micbias [ 1.812081] mmcblk1: p1 p2 [ 1.825035] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.833428] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.857348] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.874813] VDD10_HDMI_1.0V: disabling [ 1.875499] vdd_g3d: disabling [ 1.876569] BUCK8_2.8V: disabling [ 1.880543] ALSA device list: [ 1.882201] #0: Odroid-U3 [ 1.885838] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:55]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:56]: Done. Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.365676] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.370504] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.377468] ledtrig-cpu: registered to indicate activity on CPUs [ 1.382262] usbcore: registered new interface driver usbhid [ 1.387559] usbhid: USB HID core driver [ 1.391464] isl29018 7-0044: No cache defaults, reading back from HW [ 1.397811] isl29018 7-0044: Failed to read 1: -6 [ 1.402395] isl29018 7-0044: regmap initialization fails: -6 [ 1.412675] NET: Registered protocol family 10 [ 1.417073] sit: IPv6 over IPv4 tunneling driver [ 1.420657] NET: Registered protocol family 17 [ 1.424658] can: controller area network core (rev 20120528 abi 9) [ 1.430868] NET: Registered protocol family 29 [ 1.435238] can: raw protocol (rev 20120528) [ 1.439507] can: broadcast manager protocol (rev 20120528 t) [ 1.445149] can: netlink gateway (rev 20130117) max_hops=1 [ 1.450897] Key type dns_resolver registered [ 1.455171] ThumbEE CPU extension supported. [ 1.459120] Registering SWP/SWPB emulation handler [ 1.468189] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.473677] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.480037] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.485413] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.495493] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.504969] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.510405] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.520559] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.526786] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.532163] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.541868] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.563955] Waiting for root device /dev/mmcblk0p1... [ 1.567836] mmc0: tuning execution failed: -5 [ 1.571891] mmc0: error -5 whilst initialising MMC card [PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:53]: got exception: timeout ~$off [PYBOOT] [pi 01:54]: Done. Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.366168] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 1.370991] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.377984] ledtrig-cpu: registered to indicate activity on CPUs [ 1.382780] usbcore: registered new interface driver usbhid [ 1.388076] usbhid: USB HID core driver [ 1.391982] isl29018 7-0044: No cache defaults, reading back from HW [ 1.398330] isl29018 7-0044: Failed to read 1: -6 [ 1.402912] isl29018 7-0044: regmap initialization fails: -6 [ 1.413222] NET: Registered protocol family 10 [ 1.417667] sit: IPv6 over IPv4 tunneling driver [ 1.421229] NET: Registered protocol family 17 [ 1.425228] can: controller area network core (rev 20120528 abi 9) [ 1.431439] NET: Registered protocol family 29 [ 1.435808] can: raw protocol (rev 20120528) [ 1.440078] can: broadcast manager protocol (rev 20120528 t) [ 1.445718] can: netlink gateway (rev 20130117) max_hops=1 [ 1.451443] Key type dns_resolver registered [ 1.455739] ThumbEE CPU extension supported. [ 1.459690] Registering SWP/SWPB emulation handler [ 1.468796] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.474282] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.480642] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.486018] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.496094] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.505612] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.511045] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.521221] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.527425] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.532802] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.542511] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.564753] Waiting for root device /dev/mmcblk0p1... [ 1.568631] mmc0: tuning execution failed: -5 [ 1.572685] mmc0: error -5 whilst initialising MMC card [PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:55]: got exception: timeout ~$off [PYBOOT] [pi 01:56]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Waiting for /dev to be fully populated...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 3.135837] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.144197] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 4.193332] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. INIT: Entering runlevel: 2 [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 03:12]: got exception: timeout ~$off [PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.965301] can: controller area network core (rev 20120528 abi 9) [ 1.971649] NET: Registered protocol family 29 [ 1.976165] can: raw protocol (rev 20120528) [ 1.980468] can: broadcast manager protocol (rev 20120528 t) [ 1.986175] can: netlink gateway (rev 20130117) max_hops=1 [ 1.992523] Key type dns_resolver registered [ 1.997161] ThumbEE CPU extension supported. [ 2.001495] Registering SWP/SWPB emulation handler [ 2.009399] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.016204] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.025390] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.032409] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.039428] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.046417] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.059753] db8500-esram12: disabling [ 2.063476] db8500-esram34: disabling [ 2.067443] V-CSI/DSI: disabling [ 2.070739] mmci-reg: disabling [ 2.074462] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.080444] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.086791] Waiting for root device /dev/mmcblk0p4... [ 2.110260] mmc3: new high speed MMC card at address 0001 [ 2.116607] mmcblk3: mmc3:0001 3.53 GiB [ 2.121032] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.126831] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.132446] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.138977] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:12]: got exception: timeout ~$off [PYBOOT] [snowball 02:13]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.862182] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.869750] ledtrig-cpu: registered to indicate activity on CPUs [ 1.875976] usbcore: registered new interface driver usbhid [ 1.881561] usbhid: USB HID core driver [ 1.888824] NET: Registered protocol family 10 [ 1.894317] sit: IPv6 over IPv4 tunneling driver [ 1.899475] NET: Registered protocol family 17 [ 1.903961] can: controller area network core (rev 20120528 abi 9) [ 1.910186] NET: Registered protocol family 29 [ 1.914642] can: raw protocol (rev 20120528) [ 1.918914] can: broadcast manager protocol (rev 20120528 t) [ 1.924591] can: netlink gateway (rev 20130117) max_hops=1 [ 1.930541] Key type dns_resolver registered [ 1.934997] ThumbEE CPU extension supported. [ 1.947692] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.954376] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 1.963500] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 1.970520] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 1.977478] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 1.984466] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 1.996215] db8500-esram12: disabling [ 1.999999] db8500-esram34: disabling [ 2.003936] V-CSI/DSI: disabling [ 2.007202] mmci-reg: disabling [ 2.010894] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.016876] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.024078] Waiting for root device /dev/mmcblk0p4... [ 2.063537] mmc3: new high speed MMC card at address 0001 [ 2.069335] mmcblk3: mmc3:0001 3.53 GiB [ 2.073486] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.079071] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.084594] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.090881] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:06]: got exception: timeout ~$off [PYBOOT] [snowball 02:07]: Done. Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- [ 2.729644] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.740447] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.750396] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.761169] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.784027] NET: Registered protocol family 10 [ 2.799682] sit: IPv6 over IPv4 tunneling driver [ 2.805694] NET: Registered protocol family 17 [ 2.810211] NET: Registered protocol family 35 [ 2.814819] NET: Registered protocol family 37 [ 2.819396] Registering SWP/SWPB emulation handler [ 2.825775] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.832366] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.839080] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.848175] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-27 21:53:48 UTC (954194028) [ 2.857482] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.864501] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.871520] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.878509] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.892211] db8500-esram12: disabling [ 2.895965] db8500-esram34: disabling [ 2.899871] V-CSI/DSI: disabling [ 2.903167] mmci-reg: disabling [ 2.906463] ALSA device list: [ 2.909423] #0: MOP500-card [ 2.912811] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.918762] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.924926] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:54]: got exception: timeout ~$off [PYBOOT] [snowball 01:55]: Done.

8 years, 8 months

mainline build: 139 builds: 1 failed, 138 passed, 1 error, 217 warnings (v4.6-rc3-139-g2e572599139d)

by kernelci.org bot

mainline build: 139 builds: 1 failed, 138 passed, 1 error, 217 warnings (v4.6-rc3-139-g2e572599139d) Full Build Summary: https://kernelci.org/build/mainline/kernel/v4.6-rc3-139-g2e572599139d/ Tree: mainline Branch: local/master Git Describe: v4.6-rc3-139-g2e572599139d Git Commit: 2e572599139d27db3aaf540b0d34f0a4f58dfca1 Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git Built: 3 unique architectures Build Failure Detected: x86: allmodconfig+CONFIG_OF=n: FAIL Errors and Warnings Detected: arm: allmodconfig: 5 warnings axm55xx_defconfig: 1 warning corgi_defconfig: 1 warning ezx_defconfig: 1 warning imote2_defconfig: 1 warning imx_v6_v7_defconfig: 3 warnings iop13xx_defconfig: 1 warning iop32x_defconfig: 1 warning ixp4xx_defconfig: 1 warning mini2440_defconfig: 2 warnings moxart_defconfig: 1 warning multi_v7_defconfig: 14 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 14 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 14 warnings multi_v7_defconfig+CONFIG_EFI=y: 14 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 14 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 14 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 15 warnings multi_v7_defconfig+CONFIG_SMP=n: 14 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: 14 warnings mvebu_v7_defconfig: 2 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 2 warnings mxs_defconfig: 1 warning omap2plus_defconfig: 3 warnings pxa_defconfig: 1 warning spitz_defconfig: 1 warning tegra_defconfig: 3 warnings tinyconfig: 2 warnings vexpress_defconfig: 1 warning vt8500_v6_v7_defconfig: 9 warnings x86: allmodconfig+CONFIG_OF=n: 1 error defconfig+kvm_guest: 1 warning tinyconfig: 4 warnings arm64: allmodconfig: 7 warnings allnoconfig: 2 warnings defconfig: 5 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 5 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 5 warnings defconfig+CONFIG_LKDTM=y: 5 warnings defconfig+CONFIG_OF_UNITTEST=y: 5 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 5 warnings tinyconfig: 3 warnings Errors summary: 1 elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) Warnings summary: 16 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 16 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 14 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 14 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 11 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 11 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 10 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3 net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 mm/page_alloc.c:5989:34: warning: array subscript is below array bounds [-Warray-bounds] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 .config:948:warning: override: NOHIGHMEM changes choice state 1 .config:947:warning: override: SLOB changes choice state 1 .config:945:warning: override: KERNEL_XZ changes choice state 1 .config:914:warning: override: SLOB changes choice state 1 .config:854:warning: override: SLOB changes choice state 1 .config:852:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 15 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y (arm) — PASS, 0 errors, 14 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:852:warning: override: KERNEL_XZ changes choice state .config:854:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: .config:914:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:945:warning: override: KERNEL_XZ changes choice state .config:947:warning: override: SLOB changes choice state .config:948:warning: override: NOHIGHMEM changes choice state mm/page_alloc.c:5989:34: warning: array subscript is below array bounds [-Warray-bounds] -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next build: 126 builds: 3 failed, 123 passed, 9 errors, 288 warnings (next-20160413)

by kernelci.org bot

next build: 126 builds: 3 failed, 123 passed, 9 errors, 288 warnings (next-20160413) Full Build Summary: https://kernelci.org/build/next/kernel/next-20160413/ Tree: next Branch: local/master Git Describe: next-20160413 Git Commit: 54ea972ac5feaa81d03d861e038884130f0fddbb Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Built: 3 unique architectures Build Failures Detected: arm: allmodconfig: FAIL x86: allmodconfig: FAIL allmodconfig+CONFIG_OF=n: FAIL Errors and Warnings Detected: arm: allmodconfig: 1 error, 14 warnings axm55xx_defconfig: 2 warnings bcm_defconfig: 2 warnings cm_x300_defconfig: 2 warnings davinci_all_defconfig: 3 warnings em_x270_defconfig: 2 warnings exynos_defconfig: 2 warnings ezx_defconfig: 2 warnings imote2_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 4 warnings iop13xx_defconfig: 1 warning iop32x_defconfig: 1 warning ixp4xx_defconfig: 1 warning keystone_defconfig: 1 warning magician_defconfig: 2 warnings mini2440_defconfig: 2 warnings mmp2_defconfig: 2 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 19 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 18 warnings multi_v7_defconfig+CONFIG_EFI=y: 18 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 19 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 18 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 18 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: 18 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 4 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 4 warnings mxs_defconfig: 2 warnings nhk8815_defconfig: 2 warnings omap1_defconfig: 2 warnings omap2plus_defconfig: 8 warnings pxa3xx_defconfig: 2 warnings pxa_defconfig: 4 warnings qcom_defconfig: 2 warnings raumfeld_defconfig: 2 warnings sama5_defconfig: 2 warnings socfpga_defconfig: 2 warnings spitz_defconfig: 1 warning sunxi_defconfig: 2 warnings tinyconfig: 2 warnings u8500_defconfig: 2 warnings vexpress_defconfig: 3 warnings x86: allmodconfig: 5 errors allmodconfig+CONFIG_OF=n: 3 errors defconfig+kvm_guest: 1 warning arm64: allmodconfig: 12 warnings defconfig: 8 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 8 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 8 warnings defconfig+CONFIG_LKDTM=y: 8 warnings defconfig+CONFIG_OF_UNITTEST=y: 8 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 8 warnings tinyconfig: 4 warnings Errors summary: 4 elf.h:22:18: fatal error: gelf.h: No such file or directory 2 collect2: error: ld returned 1 exit status 2 arch/x86/../../elf.h:22:18: fatal error: gelf.h: No such file or directory 1 ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings summary: 43 drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 32 drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 15 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 15 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 12 mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] 11 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 11 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 9 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 9 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 9 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 9 drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 8 drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 7 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 7 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3 net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 arch/arm/configs/omap2plus_defconfig:117:warning: symbol value 'm' invalid for RXKAD 1 .config:916:warning: override: SLOB changes choice state 1 .config:857:warning: override: SLOB changes choice state 1 .config:855:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (x86) — FAIL, 5 errors, 0 warnings, 0 section mismatches Errors: collect2: error: ld returned 1 exit status elf.h:22:18: fatal error: gelf.h: No such file or directory elf.h:22:18: fatal error: gelf.h: No such file or directory elf.h:22:18: fatal error: gelf.h: No such file or directory arch/x86/../../elf.h:22:18: fatal error: gelf.h: No such file or directory -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 12 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig (arm) — FAIL, 1 error, 14 warnings, 0 section mismatches Errors: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 3 errors, 0 warnings, 0 section mismatches Errors: collect2: error: ld returned 1 exit status elf.h:22:18: fatal error: gelf.h: No such file or directory arch/x86/../../elf.h:22:18: fatal error: gelf.h: No such file or directory -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 19 warnings, 0 section mismatches Warnings: mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: arch/arm/configs/omap2plus_defconfig:117:warning: symbol value 'm' invalid for RXKAD net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- shannon_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:916:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] mm/gup.c:1510:20: warning: unused variable 'mm' [-Wunused-variable] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:855:warning: override: KERNEL_XZ changes choice state .config:857:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- versatile_defconfig+CONFIG_OF_UNITTEST=y (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next-20160415 build: 1 failures 20 warnings (next-20160415)

by Build bot for Mark Brown

Tree/Branch: next-20160415 Git describe: next-20160415 Commit: aec98d5310 Add linux-next specific files for 20160415 Build Time: 147 min 1 sec Passed: 8 / 9 ( 88.89 %) Failed: 1 / 9 ( 11.11 %) Errors: 1 Warnings: 20 Section Mismatches: 0 Failed defconfigs: arm-allmodconfig Errors: arm-allmodconfig ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allnoconfig 11 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 5 warnings 0 mismatches : arm-multi_v7_defconfig 4 warnings 0 mismatches : x86_64-defconfig 14 warnings 0 mismatches : arm-allmodconfig 6 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Errors summary: 1 1 ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings Summary: 20 5 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 5 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 5 ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 5 ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 3 ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 3 ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 2 ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] 1 ../net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ------------------------------------------------------------------------------- x86_64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: ../net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] ../net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : FAIL, 1 errors, 14 warnings, 0 section mismatches Errors: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 6 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] ../include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated [-Wdeprecated-declarations] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-allnoconfig

8 years, 8 months

master build: 0 failures 7 warnings (v4.6-rc3-99-g806fdcc)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.6-rc3-99-g806fdcc Commit: 806fdcce01 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build Time: 172 min 17 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 7 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allnoconfig 7 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 5 warnings 0 mismatches : arm-allmodconfig 4 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 7 5 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 5 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 2 ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-allnoconfig arm-multi_v5_defconfig x86_64-defconfig close failed in file object destructor: sys.excepthook is missing lost sys.stderr

8 years, 8 months

next build: 138 builds: 3 failed, 135 passed, 3 errors, 339 warnings (next-20160414)

by kernelci.org bot

next build: 138 builds: 3 failed, 135 passed, 3 errors, 339 warnings (next-20160414) Full Build Summary: https://kernelci.org/build/next/kernel/next-20160414/ Tree: next Branch: local/master Git Describe: next-20160414 Git Commit: d0591d2080f7fe3d5c3ff8fd6e50e4afbf053879 Git URL: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git Built: 3 unique architectures Build Failures Detected: arm: allmodconfig: FAIL x86: allmodconfig: FAIL allmodconfig+CONFIG_OF=n: FAIL Errors and Warnings Detected: arm64: allmodconfig: 11 warnings allnoconfig: 2 warnings defconfig: 7 warnings defconfig+CONFIG_CPU_BIG_ENDIAN=y: 7 warnings defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y: 7 warnings defconfig+CONFIG_LKDTM=y: 7 warnings defconfig+CONFIG_OF_UNITTEST=y: 7 warnings defconfig+CONFIG_RANDOMIZE_BASE=y: 7 warnings tinyconfig: 3 warnings arm: allmodconfig: 1 error, 14 warnings at91_dt_defconfig: 2 warnings axm55xx_defconfig: 1 warning bcm_defconfig: 2 warnings cm_x300_defconfig: 2 warnings corgi_defconfig: 1 warning davinci_all_defconfig: 3 warnings em_x270_defconfig: 2 warnings exynos_defconfig: 2 warnings ezx_defconfig: 2 warnings imote2_defconfig: 2 warnings imx_v4_v5_defconfig: 2 warnings imx_v6_v7_defconfig: 4 warnings iop13xx_defconfig: 1 warning iop32x_defconfig: 1 warning ixp4xx_defconfig: 1 warning magician_defconfig: 2 warnings mini2440_defconfig: 2 warnings mmp2_defconfig: 2 warnings multi_v5_defconfig: 2 warnings multi_v7_defconfig: 18 warnings multi_v7_defconfig+CONFIG_ARM_LPAE=y: 18 warnings multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 18 warnings multi_v7_defconfig+CONFIG_EFI=y: 18 warnings multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: 18 warnings multi_v7_defconfig+CONFIG_LKDTM=y: 18 warnings multi_v7_defconfig+CONFIG_PROVE_LOCKING=y: 18 warnings multi_v7_defconfig+CONFIG_SMP=n: 18 warnings multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y: 18 warnings mvebu_v5_defconfig: 2 warnings mvebu_v7_defconfig: 4 warnings mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y: 4 warnings mxs_defconfig: 2 warnings nhk8815_defconfig: 2 warnings omap1_defconfig: 2 warnings omap2plus_defconfig: 8 warnings pxa3xx_defconfig: 2 warnings pxa_defconfig: 4 warnings qcom_defconfig: 2 warnings raumfeld_defconfig: 2 warnings sama5_defconfig: 2 warnings socfpga_defconfig: 2 warnings spitz_defconfig: 1 warning sunxi_defconfig: 2 warnings tegra_defconfig: 5 warnings tinyconfig: 2 warnings u300_defconfig: 2 warnings u8500_defconfig: 2 warnings vexpress_defconfig: 3 warnings vt8500_v6_v7_defconfig: 9 warnings x86: allmodconfig: 1 error allmodconfig+CONFIG_OF=n: 1 error defconfig+kvm_guest: 1 warning tinyconfig: 4 warnings Errors summary: 2 elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) 1 ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings summary: 49 drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 38 drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 16 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 16 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 14 net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] 14 net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] 11 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] 11 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 11 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 11 drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 10 sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 10 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 8 drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 7 drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] 3 net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] 1 mm/page_alloc.c:6222:34: warning: array subscript is below array bounds [-Warray-bounds] 1 kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 1 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 arch/arm/configs/omap2plus_defconfig:117:warning: symbol value 'm' invalid for RXKAD 1 .config:955:warning: override: NOHIGHMEM changes choice state 1 .config:954:warning: override: SLOB changes choice state 1 .config:952:warning: override: KERNEL_XZ changes choice state 1 .config:917:warning: override: SLOB changes choice state 1 .config:857:warning: override: SLOB changes choice state 1 .config:855:warning: override: KERNEL_XZ changes choice state ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- acs5k_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allmodconfig (arm) — FAIL, 1 error, 14 warnings, 0 section mismatches Errors: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_rgb.c:182:1: warning: the frame size of 1064 bytes is larger than 1024 bytes [-Wframe-larger-than=] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/omapdrm/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/omapdrm/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] -------------------------------------------------------------------------------- allmodconfig (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allmodconfig (arm64) — PASS, 0 errors, 11 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] include/linux/export.h:63:25: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- allmodconfig+CONFIG_OF=n (x86) — FAIL, 1 error, 0 warnings, 0 section mismatches Errors: elf.c:358:32: error: 'ELF_C_READ_MMAP' undeclared (first use in this function) -------------------------------------------------------------------------------- allnoconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (arm64) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- am200epdkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- axm55xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- badge4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cerfcube_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- clps711x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- cns3420vb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- collie_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- davinci_all_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- defconfig (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_EXPERT=y+CONFIG_ACPI=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_LKDTM=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig+CONFIG_OF_UNITTEST=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+CONFIG_RANDOMIZE_BASE=y (arm64) — PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- defconfig+kvm_guest (x86) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- dove_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- em_x270_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ep93xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- exynos_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- ezx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- footbridge_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hackkit_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hisi_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- i386_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- integrator_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop13xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop32x_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- iop33x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- jornada720_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpd270_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lubbock_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- magician_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mainstone_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- mmp2_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- moxart_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- multi_v7_defconfig (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_LKDTM=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_PROVE_LOCKING=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_SMP=n (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y (arm) — PASS, 0 errors, 18 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:181:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/gpu/drm/msm/dsi/dsi_host.c:329:3: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- mv78xx0_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mvebu_v7_defconfig+CONFIG_CPU_BIG_ENDIAN=y (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- mxs_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- neponset_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- nuc910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- omap2plus_defconfig (arm) — PASS, 0 errors, 8 warnings, 0 section mismatches Warnings: arch/arm/configs/omap2plus_defconfig:117:warning: symbol value 'm' invalid for RXKAD net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/dsi.c:1183:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c:117:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] drivers/video/fbdev/omap2/omapfb/dss/hdmi5.c:134:2: warning: 'regulator_can_change_voltage' is deprecated (declared at ../include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- orion5x_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pcm027_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa168_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa3xx_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- pxa910_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pxa_defconfig (arm) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: net/bridge/br_mdb.c:569:19: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] fs/xfs/xfs_aops.c:97:15: warning: unused variable 'blockmask' [-Wunused-variable] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- qcom_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:692: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- raumfeld_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- realview_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c6400_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s5pv210_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sama5_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- shmobile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- spear13xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: crypto/wp512.c:987:1: warning: the frame size of 1168 bytes is larger than 1024 bytes [-Wframe-larger-than=] -------------------------------------------------------------------------------- stm32_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sunxi_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tct_hammer_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tegra_defconfig (arm) — PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: sound/hda/hdac_regmap.c:282:16: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'r192' may be used uninitialized in this function [-Wmaybe-uninitialized] net/bluetooth/mgmt.c:5509:8: warning: 'h192' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- tinyconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: .config:855:warning: override: KERNEL_XZ changes choice state .config:857:warning: override: SLOB changes choice state -------------------------------------------------------------------------------- tinyconfig (x86) — PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: .config:952:warning: override: KERNEL_XZ changes choice state .config:954:warning: override: SLOB changes choice state .config:955:warning: override: NOHIGHMEM changes choice state mm/page_alloc.c:6222:34: warning: array subscript is below array bounds [-Warray-bounds] -------------------------------------------------------------------------------- tinyconfig (arm64) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: .config:917:warning: override: SLOB changes choice state <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] -------------------------------------------------------------------------------- trizeps4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- u8500_defconfig (arm) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] -------------------------------------------------------------------------------- versatile_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vexpress_defconfig (arm) — PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: drivers/regulator/core.c:2514:1: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/regulator/core.c:2514:349: warning: 'regulator_can_change_voltage' is deprecated (declared at ../drivers/regulator/core.c:2497) [-Wdeprecated-declarations] drivers/virtio/virtio_ring.c:1032:5: warning: 'queue' may be used uninitialized in this function [-Wuninitialized] -------------------------------------------------------------------------------- vf610m4_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm) — PASS, 0 errors, 9 warnings, 0 section mismatches Warnings: drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] -------------------------------------------------------------------------------- x86_64_defconfig (x86) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- xcep_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zeus_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- zx_defconfig (arm) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

8 years, 8 months

next build: 170 warnings 1 failures (next/next-20160415)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was next, found at: http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git (master branch) Topmost commit: aec98d5 Add linux-next specific files for 20160415 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/next/next-20160415/ Runtime: 57m 53s Passed: 117 Failed: 1 Warnings: 170 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm.allmodconfig ------------------------------------------------------------------------------- Errors: arm.allmodconfig: ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! Warnings: 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 kernel/trace/bpf_trace.c:350:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 kernel/trace/bpf_trace.c:368:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type 2 net/netfilter/nf_conntrack_netlink.c:529:15: warning: 'ctnetlink_proto_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:546:15: warning: 'ctnetlink_acct_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:556:12: warning: 'ctnetlink_secctx_size' defined but not used [-Wunused-function] 2 net/netfilter/nf_conntrack_netlink.c:572:15: warning: 'ctnetlink_timestamp_size' defined but not used [-Wunused-function] 3 fs/xfs/xfs_aops.c:97:16: warning: unused variable 'blockmask' [-Wunused-variable] 3 net/bridge/br_mdb.c:569:4: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast 16 include/linux/regulator/consumer.h:227) [-Wdeprecated-declarations] 72 drivers/regulator/core.c:2497) [-Wdeprecated-declarations] Section mismatches:

8 years, 8 months

next boot: 54 passed 26 failed (next/next-20160415)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160415/ Failed boards: arndale arm-multi_v7_nosmp_defconfig : FAILED 2:26.93 bbb arm-omap2plus_defconfig : FAILED 1:53.77 bbb arm-multi_v7_defconfig : FAILED 2:00.48 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:08.27 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.10 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:44.26 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:49.08 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:08.26 beaver arm-tegra_defconfig : FAILED 1:45.59 beaver arm-multi_v7_defconfig : FAILED 1:52.32 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:52.15 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:19.72 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.70 cosmic arm-multi_v7_defconfig : FAILED 2:08.62 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:18.24 dalmore arm-tegra_defconfig : FAILED 1:51.39 dalmore arm-multi_v7_defconfig : FAILED 2:06.92 dalmore arm-multi_lpae_defconfig : FAILED 2:12.39 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.83 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.63 pi arm-multi_v7_defconfig : FAILED 2:05.25 pi arm-multi_lpae_defconfig : FAILED 2:03.63 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.06 snowball arm-u8500_defconfig : FAILED 1:57.36 snowball arm-multi_v7_defconfig : FAILED 2:08.24 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:01.28 Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:15.43 arndale arm-exynos_defconfig : passed 1:33.84 arndale arm-multi_v7_defconfig : warnings 1:33.95 arndale arm-multi_lpae_defconfig : warnings 1:24.49 capri arm-bcm_defconfig : passed 0:53.00 capri arm-multi_v7_defconfig : warnings 0:53.83 capri arm-multi_v7_nosmp_defconfig : warnings 1:01.94 chitra powerpc-pasemi_defconfig : passed 1:54.99 chitra powerpc-ppc64_defconfig : passed 1:59.26 colibri-vf61 arm-imx_v6_v7_defconfig : warnings 1:19.13 colibri-vf61 arm-multi_v7_defconfig : warnings 1:19.47 colibri-vf61 arm-multi_v7_nosmp_defconfig : warnings 1:16.76 colombus arm-sunxi_defconfig : passed 2:41.79 colombus arm-multi_v7_defconfig : warnings 2:53.56 colombus arm-multi_lpae_defconfig : warnings 2:32.82 cubie arm-sunxi_defconfig : passed 0:55.96 cubie arm-multi_v7_defconfig : warnings 0:53.77 cubie arm-multi_v7_nosmp_defconfig : warnings 0:58.20 cubie2 arm-sunxi_defconfig : passed 0:53.22 cubie2 arm-multi_v7_defconfig : warnings 0:59.83 cubie2 arm-multi_lpae_defconfig : warnings 0:59.50 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:57.59 cubox arm-multi_v7_defconfig : warnings 1:20.97 cubox arm-mvebu_v7_defconfig : passed 1:04.15 cubox arm-multi_v7_nosmp_defconfig : warnings 1:19.77 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.66 hummingboard arm-multi_v7_defconfig : warnings 1:43.59 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:12.82 jetsontk1 arm-tegra_defconfig : warnings 1:35.47 jetsontk1 arm-multi_v7_defconfig : warnings 1:33.87 jetsontk1 arm-multi_lpae_defconfig : warnings 1:57.17 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:33.47 pandaes arm-omap2plus_defconfig : warnings 1:45.02 pandaes arm-multi_v7_defconfig : passed 1:51.55 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:55.28 pi arm-exynos_defconfig : passed 2:11.21 pi arm-multi_v7_nosmp_defconfig : warnings 2:19.36 pit arm-exynos_defconfig : passed 2:09.04 pit arm-multi_v7_defconfig : warnings 2:17.97 pit arm-multi_lpae_defconfig : warnings 2:29.03 pit arm-multi_v7_nosmp_defconfig : warnings 2:12.85 seattle arm64-defconfig : warnings 2:21.51 snow arm-exynos_defconfig : passed 2:07.17 snow arm-multi_v7_defconfig : warnings 2:13.74 snow arm-multi_lpae_defconfig : warnings 1:59.93 socfpga arm-socfpga_defconfig : warnings 1:30.43 socfpga arm-multi_v7_defconfig : warnings 1:18.89 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:21.76 trimslice arm-tegra_defconfig : warnings 1:33.49 trimslice arm-multi_v7_defconfig : warnings 3:31.75 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.45 wandboard arm-imx_v6_v7_defconfig : passed 1:17.01 wandboard arm-multi_v7_defconfig : warnings 1:15.56 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:09.94 Offline boards: omap5uevm arm-omap2plus_defconfig : OFFLINE 1:17.34 omap5uevm arm-multi_v7_defconfig : OFFLINE 1:18.28 omap5uevm arm-multi_lpae_defconfig : OFFLINE 1:20.27 omap5uevm arm-multi_v7_nosmp_defconfig : OFFLINE 1:24.44 parallella arm-multi_v7_defconfig : OFFLINE 2:21.62 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.21 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.04 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:59.24 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.55 sama5 arm-sama5_defconfig : OFFLINE 2:16.96 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:35.76 seaboard arm-tegra_defconfig : OFFLINE 2:21.59 seaboard arm-multi_v7_defconfig : OFFLINE 2:35.02 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.19 Board legend is available at http://arm-soc.lixom.net/boards.html Board arndale-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.173029] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc3-next-20160415 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Thu Apr 14 22:17:24 PDT 2016 [ 2.194325] [c1039560] *pgd=4100041e(bad) [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.211511] Modules linked in: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fa800, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160415 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b468>] (show_stack+0x10/0x14) [ 0.000000] [<c030b468>] (show_stack) from [<c0335f48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f48>] (__warn) from [<c0335f98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [PYBOOT] [arndale 02:24]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 02:25]: got exception: timeout ~$off [PYBOOT] [arndale 02:26]: Done. Board bbb-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.639347] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.649258] ledtrig-cpu: registered to indicate activity on CPUs [ 1.656490] usbcore: registered new interface driver usbhid [ 1.662416] usbhid: USB HID core driver [ 1.674122] NET: Registered protocol family 10 [ 1.680646] sit: IPv6 over IPv4 tunneling driver [ 1.686766] NET: Registered protocol family 17 [ 1.691514] can: controller area network core (rev 20120528 abi 9) [ 1.698161] NET: Registered protocol family 29 [ 1.702870] can: raw protocol (rev 20120528) [ 1.707388] can: broadcast manager protocol (rev 20120528 t) [ 1.713381] can: netlink gateway (rev 20130117) max_hops=1 [ 1.720076] Key type dns_resolver registered [ 1.724939] omap_voltage_late_init: Voltage driver support not added [ 1.733265] ThumbEE CPU extension supported. [ 1.737872] Registering SWP/SWPB emulation handler [ 1.781657] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.788205] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795921] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.804674] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812582] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820444] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.828246] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.835583] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.844328] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.852243] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.861931] mmc1: new high speed MMC card at address 0001 [ 1.869162] hctosys: unable to open rtc device (rtc0) [ 1.882195] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.888213] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.895359] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.904213] mmcblk1: p1 p2 [ 1.909970] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:57]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:58]: got exception: timeout ~$off [PYBOOT] [bbb 01:59]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.312536] sdhci: Secure Digital Host Controller Interface driver [ 1.319074] sdhci: Copyright(c) Pierre Ossman [ 1.324842] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.388978] Synopsys Designware Multimedia Card Interface Driver [ 1.396281] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.405291] ledtrig-cpu: registered to indicate activity on CPUs [ 1.412142] usbcore: registered new interface driver usbhid [ 1.418026] usbhid: USB HID core driver [ 1.427188] NET: Registered protocol family 10 [ 1.433587] sit: IPv6 over IPv4 tunneling driver [ 1.439399] NET: Registered protocol family 17 [ 1.444127] can: controller area network core (rev 20120528 abi 9) [ 1.450720] NET: Registered protocol family 29 [ 1.455400] can: raw protocol (rev 20120528) [ 1.459901] can: broadcast manager protocol (rev 20120528 t) [ 1.465868] can: netlink gateway (rev 20130117) max_hops=1 [ 1.472324] Key type dns_resolver registered [ 1.477157] omap_voltage_late_init: Voltage driver support not added [ 1.484937] ThumbEE CPU extension supported. [ 1.497277] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.504910] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.512922] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.520685] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.528410] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.536088] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.543376] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.550979] hctosys: unable to open rtc device (rtc0) [ 1.561581] Waiting for root device /dev/mmcblk0p2... [ 1.598276] mmc1: new high speed MMC card at address 0001 [ 1.604735] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.609800] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.616285] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.624721] mmcblk1: p1 p2 [PYBOOT] [bbb 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 02:06]: got exception: timeout ~$off [PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.093350] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.099471] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.105797] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.112672] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.122266] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.131763] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.138780] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.180689] ledtrig-cpu: registered to indicate activity on CPUs [ 2.189433] oprofile: using arm/armv7 [ 2.194431] Initializing XFRM netlink socket [ 2.199581] NET: Registered protocol family 10 [ 2.210649] sit: IPv6 over IPv4 tunneling driver [ 2.219640] NET: Registered protocol family 17 [ 2.224579] NET: Registered protocol family 15 [ 2.229844] Key type dns_resolver registered [ 2.234750] omap_voltage_late_init: Voltage driver support not added [ 2.241492] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.250031] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.260504] ThumbEE CPU extension supported. [ 2.265030] Registering SWP/SWPB emulation handler [ 2.270127] SmartReflex Class3 initialized [ 2.342395] mmc1: new high speed MMC card at address 0001 [ 2.356407] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.367054] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.380684] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.387981] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.395792] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.410689] mmcblk1: p1 p2 [ 2.418895] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.436770] hctosys: unable to open rtc device (rtc0) [ 2.442289] sr_init: No PMIC hook to init smartreflex [ 2.447977] sr_init: platform driver register failed for SR [ 2.494493] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [bbb 01:52]: got exception: timeout ~$off [PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.207609] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.214683] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.240217] rtc-ds1307 2-006f: SET TIME! [ 2.245952] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.252624] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.260930] rtc-ds1307 2-006f: 64 bytes nvram [ 2.265537] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.273712] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.279494] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.287729] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.296891] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.303775] hub 1-0:1.0: USB hub found [ 2.307747] hub 1-0:1.0: 1 port detected [ 2.312155] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.317923] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.326023] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.335048] hub 2-0:1.0: USB hub found [ 2.339003] hub 2-0:1.0: 1 port detected [ 2.345105] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.413973] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.432083] aic_dvdd_fixed: disabling [ 2.436799] Waiting for root device /dev/mmcblk0p1... [ 2.463964] mmc1: new high speed MMC card at address 0001 [ 2.469942] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474829] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.481170] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.488065] mmcblk1: p1 [ 2.619715] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.649742] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.678133] hub 2-1:1.0: USB hub found [ 2.682134] hub 2-1:1.0: 4 ports detected [ 2.774158] hub 1-1:1.0: USB hub found [ 2.778136] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:47]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:48]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.208386] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.215451] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.240187] rtc-ds1307 2-006f: SET TIME! [ 2.245944] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.252604] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.260903] rtc-ds1307 2-006f: 64 bytes nvram [ 2.265501] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.273667] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.279438] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.287658] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.296806] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.303683] hub 1-0:1.0: USB hub found [ 2.307657] hub 1-0:1.0: 1 port detected [ 2.312057] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.317819] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.325917] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.334933] hub 2-0:1.0: USB hub found [ 2.338877] hub 2-0:1.0: 1 port detected [ 2.344948] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.412432] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.430167] aic_dvdd_fixed: disabling [ 2.434906] Waiting for root device /dev/mmcblk0p1... [ 2.456741] mmc1: new high speed MMC card at address 0001 [ 2.462715] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.467601] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.473942] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.480817] mmcblk1: p1 [ 2.619678] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.649706] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.678027] hub 2-1:1.0: USB hub found [ 2.682029] hub 2-1:1.0: 4 ports detected [ 2.774049] hub 1-1:1.0: USB hub found [ 2.778033] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.025294] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.032340] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.058200] rtc-ds1307 2-006f: SET TIME! [ 2.063828] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.070496] rtc-ds1307 2-006f: 'wakeup-source' is set, request for an IRQ is disabled! [ 2.078798] rtc-ds1307 2-006f: 64 bytes nvram [ 2.083375] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.090734] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.096496] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.104700] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.113845] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.120576] hub 1-0:1.0: USB hub found [ 2.124529] hub 1-0:1.0: 1 port detected [ 2.128838] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.134609] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.142681] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.151547] hub 2-0:1.0: USB hub found [ 2.155492] hub 2-0:1.0: 1 port detected [ 2.160766] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.224483] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.237483] aic_dvdd_fixed: disabling [ 2.244936] Waiting for root device /dev/mmcblk0p1... [ 2.289743] mmc1: new high speed MMC card at address 0001 [ 2.295614] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.300455] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.306742] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.313527] mmcblk1: p1 [ 2.452741] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.467764] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.494790] hub 2-1:1.0: USB hub found [ 2.498758] hub 2-1:1.0: 4 ports detected [ 2.590788] hub 1-1:1.0: USB hub found [ 2.594757] hub 1-1:1.0: 4 ports detected [PYBOOT] [beagleboard-x15 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 02:06]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 02:07]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 2.674985] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.681302] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.688191] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.698598] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.703449] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.709767] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.716614] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.726212] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.735717] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.742772] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.788982] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.795278] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.802156] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.811745] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.821247] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.828285] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.834406] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.840725] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.847575] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.857168] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.866669] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.873705] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.919232] hctosys: unable to open rtc device (rtc0) [ 2.924535] sr_init: No PMIC hook to init smartreflex [ 2.930062] sr_init: platform driver register failed for SR [ 2.976906] aic_dvdd_fixed: disabling [ 2.982184] ldousb: disabling [ 2.990311] Waiting for root device /dev/mmcblk0p1... [ 3.040598] mmc1: new high speed MMC card at address 0001 [ 3.048393] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 3.053828] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 3.060615] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 3.069198] mmcblk1: p1 [PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 01:43]: Done. Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.543145] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.550102] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.556625] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.563503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.569090] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.576637] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.586654] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.598290] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.604923] [drm] No driver support for vblank timestamp query. [ 3.610866] drm drm: No connectors reported connected with modes [ 3.616875] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.643295] Console: switching to colour frame buffer device 128x48 [ 3.655551] drm drm: fb0: frame buffer device [ 3.673808] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.684685] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.691149] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.696560] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.704392] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.718820] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.726067] hub 1-0:1.0: USB hub found [ 3.729839] hub 1-0:1.0: 1 port detected [ 3.734807] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.740217] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.747956] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.763812] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.770957] hub 2-0:1.0: USB hub found [ 3.774723] hub 2-0:1.0: 1 port detected [ 3.785081] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.798571] vdd_sata,avdd_plle: disabling [ 3.803365] usb1_vbus: disabling [ 3.807470] Waiting for root device /dev/mmcblk0p1... [ 4.088817] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.032814] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 3.472437] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.479389] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.485905] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.492740] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.498324] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.504937] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.514929] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.525289] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.531905] [drm] No driver support for vblank timestamp query. [ 3.537838] drm drm: No connectors reported connected with modes [ 3.543839] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.563175] Console: switching to colour frame buffer device 128x48 [ 3.574917] drm drm: fb0: frame buffer device [ 3.579354] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.589245] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.595693] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.601098] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.608824] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.622835] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.629191] hub 1-0:1.0: USB hub found [ 3.632956] hub 1-0:1.0: 1 port detected [ 3.637632] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.643039] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.650706] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.662832] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.669139] hub 2-0:1.0: USB hub found [ 3.672898] hub 2-0:1.0: 1 port detected [ 3.680384] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.693546] vdd_sata,avdd_plle: disabling [ 3.697937] usb1_vbus: disabling [ 3.701821] Waiting for root device /dev/mmcblk0p1... [ 3.982837] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.921406] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 3.684196] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.691150] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.696755] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.704291] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.714292] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.727135] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.733834] [drm] No driver support for vblank timestamp query. [ 3.739823] drm drm: No connectors reported connected with modes [ 3.745836] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.771897] Console: switching to colour frame buffer device 128x48 [ 3.783667] drm drm: fb0: frame buffer device [ 3.810774] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.820055] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.826533] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.831967] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.839948] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.860781] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.868502] hub 1-0:1.0: USB hub found [ 3.872282] hub 1-0:1.0: 1 port detected [ 3.877094] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.882522] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.890393] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.910777] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.918372] hub 2-0:1.0: USB hub found [ 3.922146] hub 2-0:1.0: 1 port detected [ 3.930453] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.949090] vdd_sata,avdd_plle: disabling [ 3.953513] usb1_vbus: disabling [ 3.956922] ALSA device list: [ 3.959880] #0: NVIDIA Tegra Beaver [ 3.964119] Waiting for root device /dev/mmcblk0p1... [ 4.240781] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.226187] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:43]: got exception: timeout ~$off [PYBOOT] [beaver 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [....] Activating swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 41.824730] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.839339] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [ 85.419714] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ [ 89.833003] eth0: device MAC address 22:e1:43:15:57:b2 [ 89.986142] RX IPC Checksum Offload disabled [ 89.990760] No MAC Management Counters available [ 89.996534] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/22:e1:43:15:57:b2 Sending on LPF/eth0/22:e1:43:15:57:b2 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 [PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 03:18]: got exception: timeout ~$off [PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 14.447448] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.521695] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.532024] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.606206] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.616525] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.690760] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.701090] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.775265] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.785591] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.859831] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.870153] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.944384] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.954707] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.028964] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.039299] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.113521] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.123844] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.198081] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.208404] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.282631] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.292949] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.367118] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.377444] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.451678] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.461995] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.536161] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.546481] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.620714] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.631034] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.705220] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.715544] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.789777] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.800099] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:59]: got exception: timeout ~$off [PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 14.171824] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.245802] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.255876] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.329854] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.339935] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.413914] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.423995] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.497974] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.508056] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.582040] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.592110] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.666090] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.676161] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.750143] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.760267] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.834251] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.844326] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.918308] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.928376] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.002358] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.012428] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.086410] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.096487] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.170466] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.180538] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.254517] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.264590] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.338567] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.348641] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.422625] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.432702] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.506683] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.516760] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:06]: got exception: timeout ~$off [PYBOOT] [cosmic 02:08]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 13.963377] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.037290] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.047350] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.121263] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.131324] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.205233] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.215289] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.289202] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.299262] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.373182] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.383244] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.457161] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.467226] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.541146] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.551194] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.625101] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.635150] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.709066] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.719121] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.793028] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.803078] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.876992] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.887051] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.960966] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.971026] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.044936] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.054990] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.128901] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.138963] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.212877] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.222937] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.296852] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.306909] blk_update_request: I/O error, dev mmcblk0, sector 3633201 [PYBOOT] [cosmic 02:15]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 02:16]: got exception: timeout ~$off [PYBOOT] [cosmic 02:17]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.888895] can: netlink gateway (rev 20130117) max_hops=1 [ 2.895862] Key type dns_resolver registered [ 2.902313] ThumbEE CPU extension supported. [ 2.906629] Registering SWP/SWPB emulation handler [ 2.925024] usb1_vbus: supplied by vdd-sys-5v0 [ 2.934768] usb2_vbus: supplied by vdd-sys-5v0 [ 2.951343] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.974273] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.981027] [drm] No driver support for vblank timestamp query. [ 3.004704] mmc1: new high speed MMC card at address 0001 [ 3.013808] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.020956] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.029654] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.036699] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.046972] mmcblk1: p1 [ 3.162636] Console: switching to colour frame buffer device 240x75 [ 3.249775] drm drm: fb0: frame buffer device [ 3.267478] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.282470] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.288055] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.296751] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.312490] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.323024] hub 1-0:1.0: USB hub found [ 3.327041] hub 1-0:1.0: 1 port detected [ 3.337682] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.352389] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.414070] dvdd_ts: disabling [ 3.417287] usb1_vbus: disabling [ 3.420546] vdd_cam_1v8_reg: disabling [ 3.427970] Waiting for root device /dev/mmcblk0p1... [ 3.642513] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.621148] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.412439] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:10]: got exception: timeout ~$off [PYBOOT] [dalmore 02:11]: Done. Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.911235] can: netlink gateway (rev 20130117) max_hops=1 [ 2.918323] Key type dns_resolver registered [ 2.924714] ThumbEE CPU extension supported. [ 2.929106] Registering SWP/SWPB emulation handler [ 2.944158] usb1_vbus: supplied by vdd-sys-5v0 [ 2.952580] usb2_vbus: supplied by vdd-sys-5v0 [ 2.970692] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.991086] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.997899] [drm] No driver support for vblank timestamp query. [ 3.016694] mmc1: new high speed MMC card at address 0001 [ 3.025833] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 3.031571] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 3.041536] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 3.050043] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 3.060246] mmcblk1: p1 [ 3.176352] Console: switching to colour frame buffer device 240x75 [ 3.263382] drm drm: fb0: frame buffer device [ 3.282434] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.297444] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.303052] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.311753] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.327446] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.337830] hub 1-0:1.0: USB hub found [ 3.341832] hub 1-0:1.0: 1 port detected [ 3.352427] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.367344] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.429341] dvdd_ts: disabling [ 3.432557] usb1_vbus: disabling [ 3.435816] vdd_cam_1v8_reg: disabling [ 3.443524] Waiting for root device /dev/mmcblk0p1... [ 3.652451] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.640625] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.091492] random: nonblocking pool is initialized [PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 02:04]: got exception: timeout ~$off [PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 2.427999] can: raw protocol (rev 20120528) [ 2.432314] can: broadcast manager protocol (rev 20120528 t) [ 2.438033] can: netlink gateway (rev 20130117) max_hops=1 [ 2.444609] Key type dns_resolver registered [ 2.449619] ThumbEE CPU extension supported. [ 2.471651] usb1_vbus: supplied by vdd-sys-5v0 [ 2.479946] usb2_vbus: supplied by vdd-sys-5v0 [ 2.494253] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.518891] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.525573] [drm] No driver support for vblank timestamp query. [ 2.690908] Console: switching to colour frame buffer device 240x75 [ 2.779385] drm drm: fb0: frame buffer device [ 2.784117] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.794980] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.800536] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.808928] mmc1: new high speed MMC card at address 0001 [ 2.815458] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.821744] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.826771] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.832888] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.841445] hub 1-0:1.0: USB hub found [ 2.845431] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.851628] hub 1-0:1.0: 1 port detected [ 2.855937] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.865832] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.873870] mmcblk1: p1 [ 2.881972] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.922409] dvdd_ts: disabling [ 2.925537] usb1_vbus: disabling [ 2.928837] vdd_cam_1v8_reg: disabling [ 2.934187] Waiting for root device /dev/mmcblk0p1... [ 3.172131] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.124308] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:54]: got exception: timeout ~$off [PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: ------------------------------------------------- [ 2.928415] Bluetooth: RFCOMM socket layer initialized [ 2.933637] Bluetooth: RFCOMM ver 1.11 [ 2.937547] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.942974] Bluetooth: BNEP socket layer initialized [ 2.948038] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.954040] Bluetooth: HIDP socket layer initialized [ 2.960894] Key type dns_resolver registered [ 2.970340] Registering SWP/SWPB emulation handler [ 2.990697] usb1_vbus: supplied by vdd-sys-5v0 [ 3.000066] usb2_vbus: supplied by vdd-sys-5v0 [ 3.013785] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.040817] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.047587] [drm] No driver support for vblank timestamp query. [ 3.226774] Console: switching to colour frame buffer device 240x75 [ 3.314085] drm drm: fb0: frame buffer device [ 3.347570] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.356638] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.362567] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.371804] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.397576] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.411745] hub 1-0:1.0: USB hub found [ 3.415709] hub 1-0:1.0: 1 port detected [ 3.429762] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.445295] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.540039] dvdd_ts: disabling [ 3.543143] usb1_vbus: disabling [ 3.546404] vdd_cam_1v8_reg: disabling [ 3.551106] ALSA device list: [ 3.554100] #0: NVIDIA Tegra Dalmore [ 3.559962] Waiting for root device /dev/mmcblk0p1... [ 3.737583] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.761289] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.297528] random: nonblocking pool is initialized [PYBOOT] [dalmore 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:49]: got exception: timeout ~$off [PYBOOT] [dalmore 01:50]: Done. Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.753880] usbhid: USB HID core driver [ 1.761770] NET: Registered protocol family 10 [ 1.762600] sit: IPv6 over IPv4 tunneling driver [ 1.767867] NET: Registered protocol family 17 [ 1.771115] NET: Registered protocol family 15 [ 1.775585] Key type dns_resolver registered [ 1.779908] Registering SWP/SWPB emulation handler [ 1.785644] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.790162] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.797581] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.817073] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.821340] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.828263] max98090 1-0010: MAX98090 REVID=0x43 [ 1.830544] max98090 1-0010: use default 2.8v micbias [ 1.833059] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.833064] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.833594] hub 1-3:1.0: USB hub found [ 1.833700] hub 1-3:1.0: 3 ports detected [ 1.857112] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.859163] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.875269] mmc1: new DDR MMC card at address 0001 [ 1.880325] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.884534] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.890351] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.896027] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.905250] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.911852] mmcblk1: p1 p2 [ 1.912943] VDD10_HDMI_1.0V: disabling [ 1.913591] vdd_g3d: disabling [ 1.914216] BUCK8_2.8V: disabling [ 1.915543] ALSA device list: [ 1.915546] #0: Odroid-U3 [ 1.931781] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:47]: Done. Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.637873] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644230] isl29018 7-0044: Failed to read 1: -6 [ 1.648813] isl29018 7-0044: regmap initialization fails: -6 [ 1.658947] NET: Registered protocol family 10 [ 1.663358] sit: IPv6 over IPv4 tunneling driver [ 1.666950] NET: Registered protocol family 17 [ 1.670948] can: controller area network core (rev 20120528 abi 9) [ 1.677138] NET: Registered protocol family 29 [ 1.681527] can: raw protocol (rev 20120528) [ 1.685757] can: broadcast manager protocol (rev 20120528 t) [ 1.691419] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697134] Key type dns_resolver registered [ 1.701447] ThumbEE CPU extension supported. [ 1.705367] Registering SWP/SWPB emulation handler [ 1.714531] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720023] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726379] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731753] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741821] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751417] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756851] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767059] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773231] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778607] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788327] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810489] Waiting for root device /dev/mmcblk0p1... [ 1.814370] mmc0: tuning execution failed: -5 [ 1.818421] mmc0: error -5 whilst initialising MMC card [ 2.682887] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696265] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701727] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708099] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713483] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:01]: got exception: timeout ~$off [PYBOOT] [pi 02:02]: Done. Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.637912] isl29018 7-0044: No cache defaults, reading back from HW [ 1.644267] isl29018 7-0044: Failed to read 1: -6 [ 1.648851] isl29018 7-0044: regmap initialization fails: -6 [ 1.658988] NET: Registered protocol family 10 [ 1.663401] sit: IPv6 over IPv4 tunneling driver [ 1.666996] NET: Registered protocol family 17 [ 1.670996] can: controller area network core (rev 20120528 abi 9) [ 1.677186] NET: Registered protocol family 29 [ 1.681574] can: raw protocol (rev 20120528) [ 1.685804] can: broadcast manager protocol (rev 20120528 t) [ 1.691465] can: netlink gateway (rev 20130117) max_hops=1 [ 1.697181] Key type dns_resolver registered [ 1.701498] ThumbEE CPU extension supported. [ 1.705415] Registering SWP/SWPB emulation handler [ 1.714560] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.720047] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.726407] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.731783] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.741851] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.751456] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.756890] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.767097] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.773269] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.778646] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.788368] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.810529] Waiting for root device /dev/mmcblk0p1... [ 1.814405] mmc0: tuning execution failed: -5 [ 1.818460] mmc0: error -5 whilst initialising MMC card [ 2.682912] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.696288] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.701746] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.708120] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.713505] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:03]: got exception: timeout ~$off [PYBOOT] [pi 02:04]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 523264 [ 0.000000] free_area_init_node: node 0, pgdat c10fa800, node_mem_map eeff7000 [ 2.106905] [c1039560] *pgd=4100041e(bad) [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 2.119578] Modules linked in: [ 0.000000] DMA zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 326656 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xd4/0x130 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc3-next-20160415 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e900>] (unwind_backtrace) from [<c030b468>] (show_stack+0x10/0x14) [ 0.000000] [<c030b468>] (show_stack) from [<c0335f48>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335f48>] (__warn) from [<c0335f98>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0335f98>] (warn_slowpath_fmt) from [<c0f04138>] (arm_dt_init_cpu_maps+0xd4/0x130) [ 0.000000] [<c0f04138>] (arm_dt_init_cpu_maps) from [<c0f03424>] (setup_arch+0x7b8/0x974) [ 0.000000] [<c0f03424>] (setup_arch) from [<c0f00944>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00944>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]--- [ 0.000000] CPU: All CPU(s) started in HYP mode. [ 0.000000] CPU: Virtualization extensions available. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521728 [ 0.000000] Kernel command line: console=ttySAC3,115200 earlyprintk debug root=/dev/mmcblk0p3 rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1995372K/2093056K available (8457K kernel code, 1009K rwdata, 3616K rodata, 1024K init, 304K bss, 32148K reserved, 65536K cma-reserved, 1241088K highmem) [PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 03:12]: got exception: timeout ~$off [PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.061676] can: controller area network core (rev 20120528 abi 9) [ 2.067932] NET: Registered protocol family 29 [ 2.072387] can: raw protocol (rev 20120528) [ 2.076660] can: broadcast manager protocol (rev 20120528 t) [ 2.082336] can: netlink gateway (rev 20130117) max_hops=1 [ 2.088348] Key type dns_resolver registered [ 2.092773] ThumbEE CPU extension supported. [ 2.097076] Registering SWP/SWPB emulation handler [ 2.110565] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.118286] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.128479] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.135681] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.142822] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.147308] mmc3: new high speed MMC card at address 0001 [ 2.148895] mmcblk3: mmc3:0001 3.53 GiB [ 2.149505] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.150085] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.150756] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.160308] mmcblk3: p1 p2 p3 p4 [ 2.178985] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.202239] db8500-esram12: disabling [ 2.206207] db8500-esram34: disabling [ 2.210235] V-CSI/DSI: disabling [ 2.213500] mmci-reg: disabling [ 2.217163] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.223144] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.229461] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 02:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 02:06]: got exception: timeout ~$off [PYBOOT] [snowball 02:07]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: ------------------------------------------------- [ 1.952117] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.959564] ledtrig-cpu: registered to indicate activity on CPUs [ 1.965881] usbcore: registered new interface driver usbhid [ 1.971466] usbhid: USB HID core driver [ 1.978485] NET: Registered protocol family 10 [ 1.983978] sit: IPv6 over IPv4 tunneling driver [ 1.989135] NET: Registered protocol family 17 [ 1.993591] can: controller area network core (rev 20120528 abi 9) [ 1.999816] NET: Registered protocol family 29 [ 2.004272] can: raw protocol (rev 20120528) [ 2.008514] can: broadcast manager protocol (rev 20120528 t) [ 2.014190] can: netlink gateway (rev 20130117) max_hops=1 [ 2.020080] Key type dns_resolver registered [ 2.024505] ThumbEE CPU extension supported. [ 2.037017] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.043731] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.052825] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.059844] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.066802] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.073791] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.085723] db8500-esram12: disabling [ 2.089508] db8500-esram34: disabling [ 2.093444] V-CSI/DSI: disabling [ 2.096710] mmci-reg: disabling [ 2.100372] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.106353] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.113555] Waiting for root device /dev/mmcblk0p4... [ 2.151580] mmc3: new high speed MMC card at address 0001 [ 2.157409] mmcblk3: mmc3:0001 3.53 GiB [ 2.161621] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.167144] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.172668] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.178955] mmcblk3: p1 p2 p3 p4 [PYBOOT] [snowball 01:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:59]: got exception: timeout ~$off [PYBOOT] [snowball 02:00]: Done. Board snowball-arm-u8500_defconfig failure log: ------------------------------------------------- [ 2.541320] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.547576] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.560028] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.570831] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.580810] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.591583] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.614959] NET: Registered protocol family 10 [ 2.620391] sit: IPv6 over IPv4 tunneling driver [ 2.625762] NET: Registered protocol family 17 [ 2.630310] NET: Registered protocol family 35 [ 2.634826] NET: Registered protocol family 37 [ 2.639373] Registering SWP/SWPB emulation handler [ 2.645904] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.657958] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-03-27 02:25:27 UTC (954123927) [ 2.667358] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.674407] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.681427] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.688385] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.702239] db8500-esram12: disabling [ 2.705963] db8500-esram34: disabling [ 2.709869] V-CSI/DSI: disabling [ 2.713195] mmci-reg: disabling [ 2.716491] ALSA device list: [ 2.719451] #0: MOP500-card [ 2.722808] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.728759] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.734985] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected. Disconnected. [PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [snowball 01:54]: got exception: timeout ~$off [PYBOOT] [snowball 01:55]: Done.

8 years, 8 months

master build: 0 failures 7 warnings (v4.6-rc3-61-g51d7b12)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.6-rc3-61-g51d7b12 Commit: 51d7b12041 /proc/iomem: only expose physical resource addresses to privileged users Build Time: 86 min 43 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 7 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 2 warnings 0 mismatches : arm64-allnoconfig 7 warnings 0 mismatches : arm64-allmodconfig 1 warnings 0 mismatches : arm-multi_v7_defconfig 5 warnings 0 mismatches : arm-allmodconfig 4 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 7 5 <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 5 <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 3 ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 2 ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 2 ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 1 ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 7 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 5 warnings, 0 section mismatches Warnings: ../lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1472 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] ../drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] ../drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ../drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 4 warnings, 0 section mismatches Warnings: <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] <stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] <stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig arm-allnoconfig arm-multi_v5_defconfig x86_64-defconfig

8 years, 8 months

mainline build: 75 warnings 0 failures (mainline/v4.6-rc3-99-g806fdcc)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 806fdcc Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.6-rc3-99-g806fdcc/ Runtime: 58m 28s Passed: 118 Failed: 0 Warnings: 75 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: ------------------------------------------------------------------------------- Errors: Warnings: 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allmodconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.allnoconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.arm64.defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.pasemi_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1310:2: warning: #warning syscall preadv2 not implemented [-Wcpp] 1 buildall.powerpc.ppc64_defconfig.log.passed:<stdin>:1313:2: warning: #warning syscall pwritev2 not implemented [-Wcpp] 1 drivers/isdn/hardware/eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] 1 drivers/mtd/chips/cfi_cmdset_0020.c:651:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=] 1 include/sound/control.h:219:2: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 lib/lz4/lz4hc_compress.c:514:1: warning: the frame size of 1480 bytes is larger than 1024 bytes [-Wframe-larger-than=] 2 drivers/tty/serial/uartlite.c:348:21: warning: assignment discards 'const' qualifier from pointer target type 2 drivers/tty/serial/uartlite.c:354:22: warning: assignment discards 'const' qualifier from pointer target type 3 net/bridge/br_mdb.c:569:4: warning: 'pg' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:428:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:429:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:430:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:507:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:508:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:509:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:558:14: warning: 'best_mul' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:559:12: warning: 'best_div1' may be used uninitialized in this function [-Wmaybe-uninitialized] 4 drivers/clk/clk-vt8500.c:560:12: warning: 'best_div2' may be used uninitialized in this function [-Wmaybe-uninitialized] 5 drivers/gpu/drm/msm/msm_drv.c:468:18: warning: unused variable 'kms' [-Wunused-variable] 6 kernel/locking/lockdep.c:2051:13: warning: 'print_collision' defined but not used [-Wunused-function] 7 include/linux/kernel.h:741:17: warning: comparison of distinct pointer types lacks a cast Section mismatches:

8 years, 8 months

← Newer
1
...
26
27
28
29
30
31
32
...
51
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports April 2016