Kernel-build-reports June 2016

kernel-build-reports@lists.linaro.org

16 participants
398 discussions

arm-soc boot: 548 boots: 0 failed, 546 passed with 2 offline (v4.7-rc1-41-g813f80af1dc9)

by kernelci.org bot

arm-soc boot: 548 boots: 0 failed, 546 passed with 2 offline (v4.7-rc1-41-g813f80af1dc9) Full Boot Summary: https://kernelci.org/boot/all/job/arm-soc/kernel/v4.7-rc1-41-g813f80af1dc9/ Full Build Summary: https://kernelci.org/build/arm-soc/kernel/v4.7-rc1-41-g813f80af1dc9/ Tree: arm-soc Branch: local/for-next Git Describe: v4.7-rc1-41-g813f80af1dc9 Git Commit: 813f80af1dc9d56d6b6810c17f561b76013faacb Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git Tested: 99 unique boards, 24 SoC families, 37 builds out of 143 Offline Platforms: arm: multi_v7_defconfig+CONFIG_EFI=y+CONFIG_ARM_LPAE=y: hip04-d01: 1 offline lab multi_v7_defconfig+CONFIG_EFI=y: hip04-d01: 1 offline lab --- For more info write to <info(a)kernelci.org>

8 years, 6 months

mainline build: 22 warnings 2 failures (mainline/v4.7-rc2)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: af8c34c Linux 4.7-rc2 Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc2/ Runtime: 26m 49s Passed: 118 Failed: 2 Warnings: 22 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years, 6 months

mainline boot: 46 passed 9 failed (mainline/v4.7-rc2)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc2/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.06 beaver arm-multi_v7_defconfig : FAILED 1:52.11 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.48 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.19 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.19 omap5uevm arm-multi_lpae_defconfig : FAILED 2:18.56 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:11.06 pi arm-multi_lpae_defconfig : FAILED 1:49.39 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.57 wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:18.78 arndale arm-exynos_defconfig : passed 1:43.44 arndale arm-multi_v7_defconfig : passed 1:24.05 arndale arm-multi_lpae_defconfig : passed 1:27.53 bbb arm-omap2plus_defconfig : passed 1:38.93 bbb arm-multi_v7_defconfig : passed 1:16.70 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:53.00 beagleboard-x15 arm-multi_v7_defconfig : warnings 1:04.41 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:52.22 capri arm-bcm_defconfig : passed 0:47.53 capri arm-multi_v7_defconfig : passed 0:59.26 chitra powerpc-ppc64_defconfig : passed 2:12.77 colombus arm-sunxi_defconfig : passed 2:28.63 colombus arm-multi_v7_defconfig : passed 2:34.08 colombus arm-multi_lpae_defconfig : passed 2:43.82 cosmic arm-imx_v6_v7_defconfig : passed 3:32.01 cosmic arm-multi_v7_defconfig : passed 3:05.70 cubie arm-sunxi_defconfig : passed 0:49.01 cubie arm-multi_v7_defconfig : passed 0:57.75 cubie2 arm-sunxi_defconfig : passed 0:54.49 cubie2 arm-multi_v7_defconfig : passed 0:55.61 cubie2 arm-multi_lpae_defconfig : passed 0:55.47 cubox arm-multi_v7_defconfig : passed 1:15.83 cubox arm-mvebu_v7_defconfig : passed 1:16.28 dalmore arm-tegra_defconfig : warnings 1:27.37 dalmore arm-multi_v7_defconfig : warnings 1:23.43 dalmore arm-multi_lpae_defconfig : warnings 1:40.50 jetsontk1 arm-tegra_defconfig : warnings 0:52.80 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.79 jetsontk1 arm-multi_lpae_defconfig : warnings 1:04.70 parallella arm-multi_v7_defconfig : passed 3:03.45 pi arm-exynos_defconfig : passed 3:10.99 pit arm-exynos_defconfig : passed 2:11.50 pit arm-multi_v7_defconfig : passed 2:20.29 pit arm-multi_lpae_defconfig : passed 2:11.81 seaboard arm-tegra_defconfig : warnings 1:03.63 seaboard arm-multi_v7_defconfig : warnings 0:54.24 seattle arm64-defconfig : passed 2:36.26 snow arm-exynos_defconfig : passed 2:07.57 snow arm-multi_v7_defconfig : passed 2:02.58 snow arm-multi_lpae_defconfig : passed 2:00.59 snowball arm-u8500_defconfig : passed 1:22.98 snowball arm-multi_v7_defconfig : passed 1:35.13 trimslice arm-tegra_defconfig : warnings 1:37.13 trimslice arm-multi_v7_defconfig : warnings 3:09.14 wandboard arm-multi_v7_defconfig : passed 1:10.79 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.86 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:33.03 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.95 hummingboard arm-multi_v7_defconfig : OFFLINE 2:11.86 pandaes arm-omap2plus_defconfig : OFFLINE 2:21.14 pandaes arm-multi_v7_defconfig : OFFLINE 2:33.69 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.17 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:51.80 sama5 arm-sama5_defconfig : OFFLINE 2:15.37 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:23.52 socfpga arm-socfpga_defconfig : OFFLINE 2:19.24 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.05 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.408151] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415108] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421628] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434153] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.440864] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.450862] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462042] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.468681] [drm] No driver support for vblank timestamp query. [ 3.474621] drm drm: No connectors reported connected with modes [ 3.480631] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.507273] Console: switching to colour frame buffer device 128x48 [ 3.519241] drm drm: fb0: frame buffer device [ 3.538735] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.549564] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.556029] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.561438] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.569275] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.583744] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.590801] hub 1-0:1.0: USB hub found [ 3.594572] hub 1-0:1.0: 1 port detected [ 3.599505] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.604916] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.612649] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.623736] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.630702] hub 2-0:1.0: USB hub found [ 3.634476] hub 2-0:1.0: 1 port detected [ 3.644267] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.657974] vdd_sata,avdd_plle: disabling [ 3.662676] usb1_vbus: disabling [ 3.666779] Waiting for root device /dev/mmcblk0p1... [ 3.948741] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.893765] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.464225] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.471272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.476873] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.484382] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.494383] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.507365] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.513985] [drm] No driver support for vblank timestamp query. [ 6.519991] drm drm: No connectors reported connected with modes [ 6.526017] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.553091] Console: switching to colour frame buffer device 128x48 [ 6.564901] drm drm: fb0: frame buffer device [ 6.591103] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.600387] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.606863] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.612296] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.620270] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.641105] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.649003] hub 1-0:1.0: USB hub found [ 6.652784] hub 1-0:1.0: 1 port detected [ 6.657589] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.663011] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.670896] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.691100] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.698891] hub 2-0:1.0: USB hub found [ 6.702666] hub 2-0:1.0: 1 port detected [ 6.712286] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.730491] vdd_sata,avdd_plle: disabling [ 6.735222] usb1_vbus: disabling [ 6.738627] ALSA device list: [ 6.741639] #0: NVIDIA Tegra Beaver [ 6.745831] Waiting for root device /dev/mmcblk0p1... [ 7.021105] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.021681] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:47]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.781030] NET: Registered protocol family 10 [ 1.781646] sit: IPv6 over IPv4 tunneling driver [ 1.785942] NET: Registered protocol family 17 [ 1.789954] NET: Registered protocol family 15 [ 1.794400] Key type dns_resolver registered [ 1.798725] Registering SWP/SWPB emulation handler [ 1.809557] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811883] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.819263] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.826420] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.833023] [drm] No driver support for vblank timestamp query. [ 1.838928] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.845269] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.850515] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862162] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.866423] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.876305] mmc1: new DDR MMC card at address 0001 [ 1.881163] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.885489] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.891479] max98090 1-0010: MAX98090 REVID=0x43 [ 1.896381] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.901856] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.908340] mmcblk1: p1 p2 [ 1.910413] max98090 1-0010: use default 2.8v micbias [ 1.921349] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.924520] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.962049] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.977806] VDD10_HDMI_1.0V: disabling [ 1.978479] vdd_g3d: disabling [ 1.979556] BUCK8_2.8V: disabling [ 1.983490] ALSA device list: [ 1.985197] #0: Odroid-U3 [ 1.988854] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:51]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:52]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:53]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.972999] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979527] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987550] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998681] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006827] ldo9: bypassed regulator has no supply! [ 2.011944] ldo9: failed to get the current voltage(-517) [ 2.017617] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031743] smsc95xx v1.0.4 [ 2.035922] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059223] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065608] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.087997] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 1a:99:55:eb:1e:af [ 2.103901] smps9: Bringing 0uV into 2100000-2100000uV [ 2.122525] ldo9: bypassed regulator has no supply! [ 2.127642] ldo9: failed to get the current voltage(-517) [ 2.133304] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.147398] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182105] smps9: Bringing 0uV into 2100000-2100000uV [ 2.200728] ldo9: bypassed regulator has no supply! [ 2.205849] ldo9: failed to get the current voltage(-517) [ 2.211514] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226037] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:31 UTC (946684951) [ 2.241925] pbias_mmc_omap5: disabling [ 2.245870] vmmcsdio_fixed: disabling [ 2.250399] Waiting for root device /dev/mmcblk1p2... [ 2.328470] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.464285] hub 1-2:1.0: USB hub found [ 2.468300] hub 1-2:1.0: 3 ports detected [ 2.474180] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.502140] smps9: Bringing 0uV into 2100000-2100000uV [ 2.520791] ldo9: bypassed regulator has no supply! [ 2.525909] ldo9: failed to get the current voltage(-517) [ 2.531579] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:15]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:16]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:17]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.972942] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979485] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987506] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998611] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006779] ldo9: bypassed regulator has no supply! [ 2.011897] ldo9: failed to get the current voltage(-517) [ 2.017565] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031768] smsc95xx v1.0.4 [ 2.035896] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059207] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065612] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.083004] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, ca:91:d1:4c:3e:8d [ 2.101878] smps9: Bringing 0uV into 2100000-2100000uV [ 2.120540] ldo9: bypassed regulator has no supply! [ 2.125659] ldo9: failed to get the current voltage(-517) [ 2.131328] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.145414] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177031] smps9: Bringing 0uV into 2100000-2100000uV [ 2.195655] ldo9: bypassed regulator has no supply! [ 2.200771] ldo9: failed to get the current voltage(-517) [ 2.206435] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.220961] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.236869] pbias_mmc_omap5: disabling [ 2.240816] vmmcsdio_fixed: disabling [ 2.245356] Waiting for root device /dev/mmcblk1p2... [ 2.323452] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.459314] hub 1-2:1.0: USB hub found [ 2.463324] hub 1-2:1.0: 3 ports detected [ 2.469194] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.497164] smps9: Bringing 0uV into 2100000-2100000uV [ 2.515862] ldo9: bypassed regulator has no supply! [ 2.520981] ldo9: failed to get the current voltage(-517) [ 2.526644] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.996612] ldo9: bypassed regulator has no supply! [ 4.001746] ldo9: failed to get the current voltage(-517) [ 4.007412] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030271] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.037830] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044398] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050710] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057552] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067132] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076645] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083710] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.089852] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096162] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.103025] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112621] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.122118] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.129161] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149875] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156168] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163029] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172617] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182114] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189144] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.209605] smps9: Bringing 0uV into 2100000-2100000uV [ 4.237884] ldo9: bypassed regulator has no supply! [ 4.243013] ldo9: failed to get the current voltage(-517) [ 4.248670] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.268757] hctosys: unable to open rtc device (rtc0) [ 4.274074] sr_init: No PMIC hook to init smartreflex [ 4.279573] sr_init: platform driver register failed for SR [ 4.307112] pbias_mmc_omap5: disabling [ 4.311073] vmmcsdio_fixed: disabling [ 4.317263] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:04]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.533958] isl29018 7-0044: No cache defaults, reading back from HW [ 1.540309] isl29018 7-0044: Failed to read 1: -6 [ 1.544894] isl29018 7-0044: regmap initialization fails: -6 [ 1.555820] NET: Registered protocol family 10 [ 1.560262] sit: IPv6 over IPv4 tunneling driver [ 1.563840] NET: Registered protocol family 17 [ 1.567845] can: controller area network core (rev 20120528 abi 9) [ 1.574035] NET: Registered protocol family 29 [ 1.578422] can: raw protocol (rev 20120528) [ 1.582672] can: broadcast manager protocol (rev 20120528 t) [ 1.588315] can: netlink gateway (rev 20130117) max_hops=1 [ 1.594039] Key type dns_resolver registered [ 1.598361] ThumbEE CPU extension supported. [ 1.602283] Registering SWP/SWPB emulation handler [ 1.612179] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617659] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.624028] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629403] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.639505] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649835] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.655277] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.665463] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671644] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.677022] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686765] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.709454] Waiting for root device /dev/mmcblk0p1... [ 1.713335] mmc0: tuning execution failed: -5 [ 1.717392] mmc0: error -5 whilst initialising MMC card [ 2.578740] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.592894] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.598351] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.604723] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.610106] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:47]: got exception: timeout ~$off [PYBOOT] [pi 01:48]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.533423] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539775] isl29018 7-0044: Failed to read 1: -6 [ 1.544359] isl29018 7-0044: regmap initialization fails: -6 [ 1.555234] NET: Registered protocol family 10 [ 1.559670] sit: IPv6 over IPv4 tunneling driver [ 1.563239] NET: Registered protocol family 17 [ 1.567249] can: controller area network core (rev 20120528 abi 9) [ 1.573439] NET: Registered protocol family 29 [ 1.577827] can: raw protocol (rev 20120528) [ 1.582077] can: broadcast manager protocol (rev 20120528 t) [ 1.587719] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593443] Key type dns_resolver registered [ 1.597768] ThumbEE CPU extension supported. [ 1.601688] Registering SWP/SWPB emulation handler [ 1.611581] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617056] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623424] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628799] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638894] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649199] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654647] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664833] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671014] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676393] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686108] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708661] Waiting for root device /dev/mmcblk0p1... [ 1.712539] mmc0: tuning execution failed: -5 [ 1.716597] mmc0: error -5 whilst initialising MMC card [ 2.578233] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.592335] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.597797] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.604171] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.609557] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:07]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:08]: got exception: timeout ~$off [PYBOOT] [pi 02:10]: Done. ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.044219] mmcblk0: error -110 sending status command, retrying [ 20.052644] mmcblk0: error -110 sending status command, retrying [ 20.061096] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"INIT: INIT: INIT: INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" [ 20.111495] mmcblk0: error -110 sending status command, retrying INIT: Id "6" respawning too fast: disab[ 20.120014] mmcblk0: error -110 sending status command, retrying led for 5 minutes INIT: Id "3"[ 20.131240] mmcblk0: error -110 sending status command, aborting respawning too fast: disabled for 5 minutes [ 20.142734] mmcblk0: error -110 sending status command, retrying [ 20.151189] mmcblk0: error -110 sending status command, retrying [ 20.159643] mmcblk0: error -110 sending status command, aborting [ 20.170676] mmcblk0: error -110 sending status command, retrying [ 20.179116] mmcblk0: error -110 sending status command, retrying [ 20.187572] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbi[ 20.203413] mmcblk0: error -110 sending status command, retrying n/getty" INIT: Id "S1" respawn[ 20.212273] mmcblk0: error -110 sending status command, retrying ing too fast: disabled for 5 minu[ 20.221137] mmcblk0: error -110 sending status command, aborting tes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 49.004517] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:55]: got exception: timeout ~$off [PYBOOT] [wandboard 02:56]: Done.

8 years, 6 months

master build: 0 failures 5 warnings (v4.7-rc1-255-g5975b2c)

by Build bot for Mark Brown

Tree/Branch: master Git describe: v4.7-rc1-255-g5975b2c Commit: 5975b2c0c1 Merge branch 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Build Time: 79 min 39 sec Passed: 9 / 9 (100.00 %) Failed: 0 / 9 ( 0.00 %) Errors: 0 Warnings: 5 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 3 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 5 2 ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] 1 ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] 1 ../drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: ../fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: ../drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] ../drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: ../drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: arm64-allnoconfig arm-multi_v5_defconfig arm-multi_v7_defconfig x86_64-defconfig arm-allnoconfig x86_64-allnoconfig

8 years, 6 months

mainline boot: 45 passed 10 failed (mainline/v4.7-rc1-255-g5975b2c)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc1-255-g5975b2c/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:49.03 beaver arm-multi_v7_defconfig : FAILED 1:52.19 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.78 omap5uevm arm-omap2plus_defconfig : FAILED 2:07.10 omap5uevm arm-multi_v7_defconfig : FAILED 2:04.92 omap5uevm arm-multi_lpae_defconfig : FAILED 2:19.28 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 0:31.77 pi arm-multi_v7_defconfig : FAILED 1:50.12 pi arm-multi_lpae_defconfig : FAILED 1:58.12 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.13 wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:20.88 arndale arm-exynos_defconfig : passed 2:35.61 arndale arm-multi_v7_defconfig : passed 1:34.23 arndale arm-multi_lpae_defconfig : passed 1:24.31 bbb arm-omap2plus_defconfig : passed 1:40.41 bbb arm-multi_v7_defconfig : passed 1:18.70 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.34 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:55.08 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:04.21 capri arm-bcm_defconfig : passed 0:54.94 capri arm-multi_v7_defconfig : passed 0:58.55 chitra powerpc-ppc64_defconfig : passed 2:11.64 colombus arm-sunxi_defconfig : passed 2:28.73 colombus arm-multi_v7_defconfig : passed 2:37.89 colombus arm-multi_lpae_defconfig : passed 2:37.58 cosmic arm-imx_v6_v7_defconfig : passed 3:27.90 cosmic arm-multi_v7_defconfig : passed 2:57.89 cubie arm-sunxi_defconfig : passed 0:50.03 cubie arm-multi_v7_defconfig : passed 0:58.16 cubie2 arm-sunxi_defconfig : passed 1:01.31 cubie2 arm-multi_v7_defconfig : passed 0:53.81 cubie2 arm-multi_lpae_defconfig : passed 1:00.80 cubox arm-multi_v7_defconfig : passed 1:16.08 cubox arm-mvebu_v7_defconfig : passed 1:12.90 dalmore arm-tegra_defconfig : warnings 1:27.68 dalmore arm-multi_v7_defconfig : warnings 1:27.67 dalmore arm-multi_lpae_defconfig : warnings 1:35.19 jetsontk1 arm-tegra_defconfig : warnings 0:54.79 jetsontk1 arm-multi_v7_defconfig : warnings 0:48.93 jetsontk1 arm-multi_lpae_defconfig : warnings 0:57.26 parallella arm-multi_v7_defconfig : passed 2:45.51 pit arm-exynos_defconfig : passed 2:15.75 pit arm-multi_v7_defconfig : passed 2:23.98 pit arm-multi_lpae_defconfig : passed 2:14.01 seaboard arm-tegra_defconfig : warnings 1:01.78 seaboard arm-multi_v7_defconfig : warnings 0:56.67 seattle arm64-defconfig : passed 2:15.21 snow arm-exynos_defconfig : passed 2:11.60 snow arm-multi_v7_defconfig : passed 2:01.25 snow arm-multi_lpae_defconfig : passed 2:00.83 snowball arm-u8500_defconfig : passed 1:19.66 snowball arm-multi_v7_defconfig : passed 2:41.22 trimslice arm-tegra_defconfig : warnings 1:40.93 trimslice arm-multi_v7_defconfig : warnings 1:51.17 wandboard arm-multi_v7_defconfig : passed 1:14.34 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.89 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.81 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:23.71 hummingboard arm-multi_v7_defconfig : OFFLINE 2:14.38 pandaes arm-omap2plus_defconfig : OFFLINE 2:14.10 pandaes arm-multi_v7_defconfig : OFFLINE 2:22.82 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:50.80 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.79 sama5 arm-sama5_defconfig : OFFLINE 2:21.83 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.73 socfpga arm-socfpga_defconfig : OFFLINE 2:19.59 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.58 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.418068] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.425025] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.431544] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.438493] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.444077] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.450784] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.460783] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.471649] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.478283] [drm] No driver support for vblank timestamp query. [ 3.484233] drm drm: No connectors reported connected with modes [ 3.490244] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.516485] Console: switching to colour frame buffer device 128x48 [ 3.528471] drm drm: fb0: frame buffer device [ 3.543664] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.554504] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.560971] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.566382] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.574213] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.588672] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.595731] hub 1-0:1.0: USB hub found [ 3.599504] hub 1-0:1.0: 1 port detected [ 3.604440] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.609856] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.617597] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.628665] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.635626] hub 2-0:1.0: USB hub found [ 3.639394] hub 2-0:1.0: 1 port detected [ 3.649212] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.662941] vdd_sata,avdd_plle: disabling [ 3.667641] usb1_vbus: disabling [ 3.671740] Waiting for root device /dev/mmcblk0p1... [ 3.953671] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.895457] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:51]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.434201] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.441241] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.446843] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.454352] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.464351] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.477432] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.484072] [drm] No driver support for vblank timestamp query. [ 6.490077] drm drm: No connectors reported connected with modes [ 6.496100] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.523351] Console: switching to colour frame buffer device 128x48 [ 6.535165] drm drm: fb0: frame buffer device [ 6.561087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.570367] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.576848] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.582280] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.590253] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.611085] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.618981] hub 1-0:1.0: USB hub found [ 6.622776] hub 1-0:1.0: 1 port detected [ 6.627582] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.633022] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.640921] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.661076] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.668850] hub 2-0:1.0: USB hub found [ 6.672641] hub 2-0:1.0: 1 port detected [ 6.681048] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.699304] vdd_sata,avdd_plle: disabling [ 6.704103] usb1_vbus: disabling [ 6.707510] ALSA device list: [ 6.710467] #0: NVIDIA Tegra Beaver [ 6.714711] Waiting for root device /dev/mmcblk0p1... [ 6.991083] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.991347] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.781213] NET: Registered protocol family 10 [ 1.781871] sit: IPv6 over IPv4 tunneling driver [ 1.786677] NET: Registered protocol family 17 [ 1.789927] NET: Registered protocol family 15 [ 1.794414] Key type dns_resolver registered [ 1.798738] Registering SWP/SWPB emulation handler [ 1.806573] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.811285] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.818703] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.825859] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.832443] [drm] No driver support for vblank timestamp query. [ 1.838360] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.844746] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.849907] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.857081] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.865834] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.875624] mmc1: new DDR MMC card at address 0001 [ 1.880569] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.884837] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.890667] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.896373] max98090 1-0010: MAX98090 REVID=0x43 [ 1.901152] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.907713] mmcblk1: p1 p2 [ 1.910114] max98090 1-0010: use default 2.8v micbias [ 1.920770] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.929256] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.963674] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.980392] VDD10_HDMI_1.0V: disabling [ 1.981079] vdd_g3d: disabling [ 1.982183] BUCK8_2.8V: disabling [ 1.986085] ALSA device list: [ 1.987804] #0: Odroid-U3 [ 1.991410] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:48]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.973136] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979672] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987705] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998793] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006938] ldo9: bypassed regulator has no supply! [ 2.012063] ldo9: failed to get the current voltage(-517) [ 2.017732] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031958] smsc95xx v1.0.4 [ 2.035988] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059244] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065661] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.086079] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:10:65:06:45:29 [ 2.105110] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123829] ldo9: bypassed regulator has no supply! [ 2.128950] ldo9: failed to get the current voltage(-517) [ 2.134608] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148698] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182081] smps9: Bringing 0uV into 2100000-2100000uV [ 2.200727] ldo9: bypassed regulator has no supply! [ 2.205849] ldo9: failed to get the current voltage(-517) [ 2.211514] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.225994] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:31 UTC (946684951) [ 2.241881] pbias_mmc_omap5: disabling [ 2.245828] vmmcsdio_fixed: disabling [ 2.250379] Waiting for root device /dev/mmcblk1p2... [ 2.323485] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.459253] hub 1-2:1.0: USB hub found [ 2.463269] hub 1-2:1.0: 3 ports detected [ 2.469149] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.497222] smps9: Bringing 0uV into 2100000-2100000uV [ 2.515896] ldo9: bypassed regulator has no supply! [ 2.521018] ldo9: failed to get the current voltage(-517) [ 2.526682] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:14]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:15]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:17]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.938142] mmc0: new high speed MMC card at address 0001 [ 1.948966] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953939] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.960322] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.969288] smsc95xx v1.0.4 [ 1.973417] smps9: Bringing 0uV into 2100000-2100000uV [ 1.981515] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988050] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996080] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007212] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015381] ldo9: bypassed regulator has no supply! [ 2.020504] ldo9: failed to get the current voltage(-517) [ 2.022931] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 92:35:e3:2d:dc:47 [ 2.037844] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.053180] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079245] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085652] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112333] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131388] ldo9: bypassed regulator has no supply! [ 2.136506] ldo9: failed to get the current voltage(-517) [ 2.142167] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156780] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.172688] pbias_mmc_omap5: disabling [ 2.176645] vmmcsdio_fixed: disabling [ 2.181223] Waiting for root device /dev/mmcblk1p2... [ 2.263451] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.399228] hub 1-2:1.0: USB hub found [ 2.403238] hub 1-2:1.0: 3 ports detected [ 2.409185] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.437379] smps9: Bringing 0uV into 2100000-2100000uV [ 2.456360] ldo9: bypassed regulator has no supply! [ 2.461480] ldo9: failed to get the current voltage(-517) [ 2.467150] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:04]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.996457] ldo9: bypassed regulator has no supply! [ 4.001584] ldo9: failed to get the current voltage(-517) [ 4.007247] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030205] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.037753] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044316] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050624] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057466] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067052] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076546] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083607] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.089741] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096037] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.102889] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112474] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.121969] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.128987] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.169913] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.176211] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.183080] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.192667] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.202152] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.209183] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.229636] smps9: Bringing 0uV into 2100000-2100000uV [ 4.257910] ldo9: bypassed regulator has no supply! [ 4.263034] ldo9: failed to get the current voltage(-517) [ 4.268707] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.288794] hctosys: unable to open rtc device (rtc0) [ 4.294113] sr_init: No PMIC hook to init smartreflex [ 4.299611] sr_init: platform driver register failed for SR [ 4.327122] pbias_mmc_omap5: disabling [ 4.331085] vmmcsdio_fixed: disabling [ 4.337274] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:06]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 3.197096] exynos-drm exynos-drm: fb0: frame buffer device [ 3.215124] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.220161] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.227634] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.249936] vdd_1v2_2: disabling [ 3.251871] TPS65090_RAILSDCDC3: disabling [ 3.255791] TPS65090_RAILSLDO1: disabling [ 3.259753] TPS65090_RAILSLDO2: disabling [ 3.264274] ALSA device list: [ 3.266711] #0: Peach-Pi-I2S-MAX98091 [ 3.271905] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.287419] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.294106] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.303031] devtmpfs: mounted [ 3.305075] Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) [PYBOOT] [pi 00:29]: kernel: finished booting, starting userspace. [ 3.314949] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.320511] pgd = edbc8000 [ 3.323201] [00000000] *pgd=fb82c835 [ 3.335177] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.335177] [ 3.342826] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-rc1-00255-g5975b2c #1 [ 3.349850] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.355944] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 3.363649] [<c010ad18>] (show_stack) from [<c0326818>] (dump_stack+0x78/0x8c) [ 3.370851] [<c0326818>] (dump_stack) from [<c01966c0>] (panic+0xd8/0x250) [ 3.377704] [<c01966c0>] (panic) from [<c011e6a0>] (do_exit+0xa10/0xa34) [ 3.384380] [<c011e6a0>] (do_exit) from [<c011f27c>] (do_group_exit+0x3c/0xbc) [ 3.391582] [<c011f27c>] (do_group_exit) from [<c012875c>] (get_signal+0x220/0x5a4) [ 3.399214] [<c012875c>] (get_signal) from [<c010a460>] (do_signal+0xc4/0x418) [ 3.406415] [<c010a460>] (do_signal) from [<c010a958>] (do_work_pending+0x94/0xa4) [ 3.413962] [<c010a958>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.422129] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.422129] [PYBOOT] [pi 00:30]: got exception: panic ~$off [PYBOOT] [pi 00:31]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.538876] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545227] isl29018 7-0044: Failed to read 1: -6 [ 1.549812] isl29018 7-0044: regmap initialization fails: -6 [ 1.560742] NET: Registered protocol family 10 [ 1.565180] sit: IPv6 over IPv4 tunneling driver [ 1.568753] NET: Registered protocol family 17 [ 1.572763] can: controller area network core (rev 20120528 abi 9) [ 1.578953] NET: Registered protocol family 29 [ 1.583340] can: raw protocol (rev 20120528) [ 1.587590] can: broadcast manager protocol (rev 20120528 t) [ 1.593233] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598959] Key type dns_resolver registered [ 1.603278] ThumbEE CPU extension supported. [ 1.607201] Registering SWP/SWPB emulation handler [ 1.617091] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622567] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628937] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634313] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644418] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654764] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660212] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670399] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676579] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681957] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691683] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714393] Waiting for root device /dev/mmcblk0p1... [ 1.718271] mmc0: tuning execution failed: -5 [ 1.722327] mmc0: error -5 whilst initialising MMC card [ 2.583660] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597823] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603288] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609659] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615042] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:54]: got exception: timeout ~$off [PYBOOT] [pi 01:55]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.533504] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539854] isl29018 7-0044: Failed to read 1: -6 [ 1.544440] isl29018 7-0044: regmap initialization fails: -6 [ 1.555319] NET: Registered protocol family 10 [ 1.559751] sit: IPv6 over IPv4 tunneling driver [ 1.563321] NET: Registered protocol family 17 [ 1.567330] can: controller area network core (rev 20120528 abi 9) [ 1.573520] NET: Registered protocol family 29 [ 1.577908] can: raw protocol (rev 20120528) [ 1.582157] can: broadcast manager protocol (rev 20120528 t) [ 1.587800] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593526] Key type dns_resolver registered [ 1.597850] ThumbEE CPU extension supported. [ 1.601768] Registering SWP/SWPB emulation handler [ 1.611613] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617093] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623461] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628837] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638934] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649245] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654693] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664878] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671060] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676439] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686160] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708708] Waiting for root device /dev/mmcblk0p1... [ 1.712584] mmc0: tuning execution failed: -5 [ 1.716642] mmc0: error -5 whilst initialising MMC card [ 2.583296] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597400] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602859] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609232] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614615] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:48]: got exception: timeout ~$off [PYBOOT] [pi 01:49]: Done. ======================================================================== Board wandboard-arm-imx_v6_v7_defconfig failure log: ------------------------------------------------- [ 20.114107] mmcblk0: error -110 sending status command, retrying [ 20.122630] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too[ 20.135637] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.146891] mmcblk0: error -110 sending status command, retrying [ 20.155644] mmcblk0: error -110 sending status command, aborting [ 20.168516] mmcblk0: error -110 sending status command, retrying [ 20.176977] mmcblk0: error -110 sending status command, retrying [ 20.185447] mmcblk0: error -110 sending status command, aborting [ 20.198297] mmcblk0: error -110 sending status command, retrying [ 20.206773] mmcblk0: error -110 sending status command, retrying [ 20.219284] mmcblk0: error -110 sending status command, aborting [ 20.236409] mmcblk0: error -110 sending status command, retrying [ 20.248934] mmcblk0: error -110 sending status command, retrying [ 20.261448] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" Id "5" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes [ 20.310745] mmcblk0: error -110 sending status command, retrying [ 20.319222] mmcblk0: error -110 sending status command, retrying [ 20.327669] mmcblk0: error -110 sending status command, aborting [ 20.338663] mmcblk0: error -110 sending status command, retrying [ 20.347128] mmcblk0: error -110 sending status command, retrying [ 20.355560] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 51.004478] random: nonblocking pool is initialized [PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 02:56]: got exception: timeout ~$off [PYBOOT] [wandboard 02:57]: Done.

8 years, 6 months

mainline build: 22 warnings 2 failures (mainline/v4.7-rc1-255-g5975b2c)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was mainline, found at: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git (master branch) Topmost commit: 5975b2c Merge branch 'parisc-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc1-255-g5975b2c/ Runtime: 19m 50s Passed: 118 Failed: 2 Warnings: 22 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/gpu/drm/omapdrm/dss/dsi.c:1170:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/gpu/drm/omapdrm/dss/hdmi5.c:123:6: warning: unused variable 'r' [-Wunused-variable] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years, 6 months

arm-soc boot: 44 passed 11 failed (arm-soc/v4.7-rc1-41-g813f80a)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.7-rc1-41-g813f80a/ Failed boards: arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.62 beaver arm-multi_v7_defconfig : FAILED 1:52.51 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:48.39 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.62 omap5uevm arm-multi_lpae_defconfig : FAILED 0:51.83 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:48.23 pi arm-multi_v7_defconfig : FAILED 2:00.04 pi arm-multi_lpae_defconfig : FAILED 2:02.68 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:50.25 pit arm-multi_v7_defconfig : FAILED 1:58.70 pit arm-multi_lpae_defconfig : FAILED 1:58.60 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:19.38 arndale arm-exynos_defconfig : passed 1:34.93 arndale arm-multi_v7_defconfig : passed 1:29.54 arndale arm-multi_lpae_defconfig : passed 1:40.96 bbb arm-omap2plus_defconfig : passed 1:40.40 bbb arm-multi_v7_defconfig : passed 1:16.70 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:52.78 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:51.40 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:51.45 capri arm-bcm_defconfig : passed 0:49.58 capri arm-multi_v7_defconfig : passed 1:07.43 chitra powerpc-ppc64_defconfig : passed 3:07.56 colombus arm-sunxi_defconfig : passed 2:36.01 colombus arm-multi_v7_defconfig : passed 2:33.64 colombus arm-multi_lpae_defconfig : passed 2:31.49 cosmic arm-imx_v6_v7_defconfig : passed 3:24.65 cosmic arm-multi_v7_defconfig : passed 3:04.07 cubie arm-sunxi_defconfig : passed 0:51.59 cubie arm-multi_v7_defconfig : passed 0:54.26 cubie2 arm-sunxi_defconfig : passed 0:50.06 cubie2 arm-multi_v7_defconfig : passed 0:59.70 cubie2 arm-multi_lpae_defconfig : passed 0:50.45 cubox arm-multi_v7_defconfig : passed 1:22.09 cubox arm-mvebu_v7_defconfig : passed 1:27.72 dalmore arm-tegra_defconfig : warnings 1:27.91 dalmore arm-multi_v7_defconfig : warnings 1:25.58 dalmore arm-multi_lpae_defconfig : warnings 1:40.41 jetsontk1 arm-tegra_defconfig : warnings 0:52.13 jetsontk1 arm-multi_v7_defconfig : warnings 0:51.88 jetsontk1 arm-multi_lpae_defconfig : warnings 0:56.46 omap5uevm arm-omap2plus_defconfig : passed 1:06.51 parallella arm-multi_v7_defconfig : passed 2:49.00 seaboard arm-tegra_defconfig : warnings 1:02.19 seaboard arm-multi_v7_defconfig : warnings 0:58.77 seattle arm64-defconfig : passed 2:26.02 snow arm-exynos_defconfig : passed 2:08.81 snow arm-multi_v7_defconfig : passed 2:01.75 snow arm-multi_lpae_defconfig : passed 2:01.92 snowball arm-u8500_defconfig : passed 1:07.01 snowball arm-multi_v7_defconfig : passed 1:10.68 trimslice arm-tegra_defconfig : warnings 1:44.39 trimslice arm-multi_v7_defconfig : warnings 2:00.64 wandboard arm-imx_v6_v7_defconfig : passed 1:10.76 wandboard arm-multi_v7_defconfig : passed 1:12.07 Offline boards: colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.61 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:25.26 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.16 hummingboard arm-multi_v7_defconfig : OFFLINE 2:14.30 pandaes arm-omap2plus_defconfig : OFFLINE 2:18.55 pandaes arm-multi_v7_defconfig : OFFLINE 2:24.91 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:55.45 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.43 sama5 arm-sama5_defconfig : OFFLINE 2:21.05 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:18.37 socfpga arm-socfpga_defconfig : OFFLINE 2:35.83 socfpga arm-multi_v7_defconfig : OFFLINE 2:14.76 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 3.408047] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415004] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421524] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428473] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434060] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441082] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451083] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462560] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469180] [drm] No driver support for vblank timestamp query. [ 3.475125] drm drm: No connectors reported connected with modes [ 3.481138] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506511] Console: switching to colour frame buffer device 128x48 [ 3.518675] drm drm: fb0: frame buffer device [ 3.533339] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544131] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550597] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556006] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563846] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578352] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585111] hub 1-0:1.0: USB hub found [ 3.588885] hub 1-0:1.0: 1 port detected [ 3.593829] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599238] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.606979] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618345] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625024] hub 2-0:1.0: USB hub found [ 3.628791] hub 2-0:1.0: 1 port detected [ 3.639153] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.652823] vdd_sata,avdd_plle: disabling [ 3.657529] usb1_vbus: disabling [ 3.661597] Waiting for root device /dev/mmcblk0p1... [ 3.938352] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.876961] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:49]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:50]: got exception: timeout ~$off [PYBOOT] [beaver 01:52]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.374234] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.381276] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.386882] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.394407] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.404406] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.417081] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.423722] [drm] No driver support for vblank timestamp query. [ 6.429722] drm drm: No connectors reported connected with modes [ 6.435749] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.461275] Console: switching to colour frame buffer device 128x48 [ 6.473106] drm drm: fb0: frame buffer device [ 6.500809] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.510107] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.516582] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.522013] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.529984] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.550806] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.558420] hub 1-0:1.0: USB hub found [ 6.562215] hub 1-0:1.0: 1 port detected [ 6.567018] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.572459] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.580334] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.600802] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.608301] hub 2-0:1.0: USB hub found [ 6.612089] hub 2-0:1.0: 1 port detected [ 6.620261] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.638442] vdd_sata,avdd_plle: disabling [ 6.642944] usb1_vbus: disabling [ 6.646357] ALSA device list: [ 6.649314] #0: NVIDIA Tegra Beaver [ 6.653566] Waiting for root device /dev/mmcblk0p1... [ 6.930806] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.916215] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:46]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.795006] NET: Registered protocol family 15 [ 1.799480] Key type dns_resolver registered [ 1.803812] Registering SWP/SWPB emulation handler [ 1.811749] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816368] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823780] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.830921] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837545] [drm] No driver support for vblank timestamp query. [ 1.843457] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849808] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.854977] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.861976] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.867612] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.867642] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.884842] mmc1: new high speed MMC card at address 0001 [ 1.885446] hub 1-3:1.0: USB hub found [ 1.885607] hub 1-3:1.0: 3 ports detected [ 1.887224] max98090 1-0010: MAX98090 REVID=0x43 [ 1.889534] max98090 1-0010: use default 2.8v micbias [ 1.908160] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.911338] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.915097] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.929916] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.935755] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.936686] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.943369] mmcblk1: p1 p2 [ 1.948627] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.972772] VDD10_HDMI_1.0V: disabling [ 1.973498] vdd_g3d: disabling [ 1.974563] BUCK8_2.8V: disabling [ 1.978631] ALSA device list: [ 1.980167] #0: Odroid-U3 [ 1.984134] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 01:46]: got exception: timeout ~$off [PYBOOT] [odroidu3 01:47]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 2.478048] pc : [<c0317998>] lr : [<c03012d8>] psr: 00000193 [ 2.478048] sp : c13020c8 ip : ffffe000 fp : 83126e97 [ 2.490049] r10: 8d4fdf3b r9 : 00000801 r8 : 00000214 [ 2.495506] r7 : 00000005 r6 : c0317d84 r5 : 00000000 r4 : c13021b8 [ 2.502325] r3 : c1302000 r2 : 00000193 r1 : 00000005 r0 : 00000214 [ 2.509144] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.516688] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.522689] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.528963] Stack: (0xc13020c8 to 0xc1302000) [ 2.533518] [<c0317998>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.541520] [<c03012d8>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.549248] Exception stack(0xc13021b8 to 0xc1302200) [ 2.554524] 21a0: 000004a0 00000005 [ 2.563068] 21c0: 60000193 c1302000 c13022f8 00000000 c0317d84 00000005 000004a0 00000801 [ 2.571619] 21e0: 8d4fdf3b 83126e97 ffffe000 c1302208 c03012d8 c0317998 00000193 ffffffff [ 2.580166] [<c030c4a0>] (__dabt_svc) from [<c0317998>] (do_page_fault+0x30/0x384) [ 2.588078] [<c0317998>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.596083] [<c03012d8>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.603814] Exception stack(0xc13022f8 to 0xc1302340) [ 2.609086] 22e0: c1302374 c03a5f40 [ 2.617631] 2300: 00000004 c1302000 ffffe000 00000000 c0319d50 c03a5f40 00000001 00000801 [ 2.626178] 2320: 8d4fdf3b 83126e97 00000000 c1302348 00000000 c03d0d14 60000193 ffffffff [ 2.634728] [<c030c4a0>] (__dabt_svc) from [<c03d0d14>] (__probe_kernel_read+0x24/0xac) [ 2.643093] [<c03d0d14>] (__probe_kernel_read) from [<c0319ddc>] (do_alignment+0x8c/0x724) [ 2.651731] [<c0319ddc>] (do_alignment) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.659641] [<c03012d8>] (do_DataAbort) from [<c030c4a0>] (__dabt_svc+0x40/0x60) [ 2.667372] Exception stack(0xc13024c0 to 0xc1302508) [ 2.672652] 24c0: 41aacad3 00000000 00000000 00000001 80419425 00000000 0020d565 00000000 [ 2.681196] 24e0: 80419425 00000000 8d4fdf3b 83126e97 00000000 c1302514 c03a5f5c c03a5f40 [ 2.689737] 2500: 60000193 ffffffff [ 2.693381] [<c030c4a0>] (__dabt_svc) from [<c03a5f40>] (update_ts_time_stats+0x90/0xf8) [ 2.701844] [<c03a5f40>] (update_ts_time_stats) from [<00000001>] (0x1) [ 2.708752] Code: e593500c e1a08000 e3120080 e1a07001 (e5956214) [ 2.715118] ---[ end trace 6978270f9404de01 ]--- [ 2.719939] Kernel panic - not syncing: Fatal exception in interrupt [PYBOOT] [omap5uevm 00:49]: got exception: panic ~$off [PYBOOT] [omap5uevm 00:50]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 2.259839] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.267387] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.273391] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.279671] Stack: (0xc1301e80 to 0xc1302000) [ 2.284224] 1e80: c1301e94 c058ee54 ffff174f c06faf6c 77359400 ee608580 00000002 00000000 [ 2.292784] 1ea0: 00000000 00000127 ee1840c0 c140e5ea c0ef4a28 c0385a28 77359400 c1302510 [ 2.301337] 1ec0: 00000000 c0ef4a50 00000000 ee1840c0 ee184120 00000000 00000001 ee008000 [ 2.309894] 1ee0: fa213000 c140e5e8 c1302510 c0385b44 ee1840c0 c130a9e8 00000000 c0388d78 [ 2.318443] 1f00: c12134dc 00000000 00000000 c03850a4 c12134dc c0385354 c1302870 c13405f8 [ 2.326999] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.335551] 1f40: c1214580 c1302508 c140e5e8 c030c514 00000001 00000000 ea000013 f0880000 [ 2.344104] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e5e8 c1302510 [ 2.352654] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.361204] 1fa0: c1300000 c0379200 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.369754] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.378307] 1fe0: c11a6a2c c1307694 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.386866] [<c0b88518>] (_raw_spin_lock_irqsave) from [<c0364088>] (try_to_wake_up+0x28/0x2bc) [ 2.395966] [<c0364088>] (try_to_wake_up) from [<c0385a28>] (handle_irq_event_percpu+0x74/0x14c) [ 2.405152] [<c0385a28>] (handle_irq_event_percpu) from [<c0385b44>] (handle_irq_event+0x44/0x68) [ 2.414437] [<c0385b44>] (handle_irq_event) from [<c0388d78>] (handle_fasteoi_irq+0xb4/0x194) [ 2.423358] [<c0388d78>] (handle_fasteoi_irq) from [<c03850a4>] (generic_handle_irq+0x24/0x34) [ 2.432363] [<c03850a4>] (generic_handle_irq) from [<c0385354>] (__handle_domain_irq+0x5c/0xb4) [ 2.441459] [<c0385354>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.450191] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.458016] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.463298] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.471851] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e5e8 c1302510 [ 2.480404] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.487322] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.495059] [<c0308780>] (arch_cpu_idle) from [<c0379200>] (cpu_startup_entry+0x1bc/0x218) [ 2.503709] [<c0379200>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.512262] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.519086] Code: 1afffffb f57ff05b e12fff1e e1a02000 (e10f0000) [ 2.525460] ---[ end trace c935a4[ 2. [PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:06]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.769369] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.774613] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.781757] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.787812] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.787889] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.787971] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.810593] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.815431] usb 1-1: Manufacturer: Generic [ 2.819488] usb 1-1: SerialNumber: 200901010001 [ 2.851141] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.863588] mmc2: new high speed SDIO card at address 0001 [ 2.895661] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.902014] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.909140] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.915730] [drm] No driver support for vblank timestamp query. [ 2.922485] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.944105] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.945837] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.950446] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.950449] exynos-dp 145b0000.dp-controller: unable to config video [ 3.035154] Console: switching to colour frame buffer device 274x77 [ 3.127098] exynos-drm exynos-drm: fb0: frame buffer device [ 3.145127] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.150169] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.157685] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.180088] vdd_1v2_2: disabling [ 3.182016] TPS65090_RAILSDCDC3: disabling [ 3.185968] TPS65090_RAILSLDO1: disabling [ 3.189929] TPS65090_RAILSLDO2: disabling [ 3.194452] ALSA device list: [ 3.196888] #0: Peach-Pi-I2S-MAX98091 [ 3.201518] Waiting for root device /dev/mmcblk0p1... [ 27.145139] random: nonblocking pool is initialized [PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:46]: got exception: timeout ~$off [PYBOOT] [pi 01:47]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.529513] usbhid: USB HID core driver [ 1.533411] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539763] isl29018 7-0044: Failed to read 1: -6 [ 1.544347] isl29018 7-0044: regmap initialization fails: -6 [ 1.555241] NET: Registered protocol family 10 [ 1.559672] sit: IPv6 over IPv4 tunneling driver [ 1.563248] NET: Registered protocol family 17 [ 1.567256] can: controller area network core (rev 20120528 abi 9) [ 1.573447] NET: Registered protocol family 29 [ 1.577833] can: raw protocol (rev 20120528) [ 1.582083] can: broadcast manager protocol (rev 20120528 t) [ 1.587724] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593445] Key type dns_resolver registered [ 1.597781] ThumbEE CPU extension supported. [ 1.601693] Registering SWP/SWPB emulation handler [ 1.611584] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617062] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623430] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628805] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638200] mmc0: mmc_select_hs200 failed, error 3 [ 1.642846] mmc0: error 3 whilst initialising MMC card [ 1.649683] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659441] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665048] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671280] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676658] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686342] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708598] Waiting for root device /dev/mmcblk0p1... [ 2.583218] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597357] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602822] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609191] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614576] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 02:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 02:01]: got exception: timeout ~$off [PYBOOT] [pi 02:02]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529528] usbhid: USB HID core driver [ 1.533424] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539777] isl29018 7-0044: Failed to read 1: -6 [ 1.544362] isl29018 7-0044: regmap initialization fails: -6 [ 1.555262] NET: Registered protocol family 10 [ 1.559693] sit: IPv6 over IPv4 tunneling driver [ 1.563270] NET: Registered protocol family 17 [ 1.567279] can: controller area network core (rev 20120528 abi 9) [ 1.573469] NET: Registered protocol family 29 [ 1.577856] can: raw protocol (rev 20120528) [ 1.582105] can: broadcast manager protocol (rev 20120528 t) [ 1.587747] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593467] Key type dns_resolver registered [ 1.597801] ThumbEE CPU extension supported. [ 1.601716] Registering SWP/SWPB emulation handler [ 1.611584] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617067] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623436] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628811] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638204] mmc0: mmc_select_hs200 failed, error 3 [ 1.642852] mmc0: error 3 whilst initialising MMC card [ 1.649685] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659454] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665061] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671294] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676672] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686351] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708609] Waiting for root device /dev/mmcblk0p1... [ 2.583236] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597380] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602842] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609214] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614598] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:56]: got exception: timeout ~$off [PYBOOT] [pi 01:57]: Done. ======================================================================== Board pit-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.692803] Registering SWP/SWPB emulation handler [ 2.697167] big.LITTLE switcher initializing [ 2.701417] bL_switcher_halve_cpus: no CPU pairing possible [ 2.706945] big.LITTLE switcher initialization failed [ 2.724428] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.728810] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.735391] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.741615] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.747976] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.753359] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.763072] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.769574] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.788411] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.793651] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.800797] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.801439] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.812984] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.817786] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.835123] usb 1-1: Manufacturer: Generic [ 2.837737] usb 1-1: SerialNumber: 200901010001 [ 2.846956] vdd_1v2_2: disabling [ 2.847118] TPS65090_RAILSDCDC3: disabling [ 2.853519] lcd_vdd: disabling [ 2.856547] TPS65090_RAILSLDO1: disabling [ 2.856552] TPS65090_RAILSLDO2: disabling [ 2.857064] ALSA device list: [ 2.857067] #0: Peach-Pit-I2S-MAX98090 [ 2.874294] Waiting for root device /dev/mmcblk0p1... [ 2.880290] Power domain power-domain@10044120 disable failed [ 2.885663] Power domain power-domain@10044020 disable failed [ 2.913461] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.925979] mmc2: new high speed SDIO card at address 0001 [ 42.880133] random: nonblocking pool is initialized [PYBOOT] [pit 01:47]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:48]: got exception: timeout ~$off [PYBOOT] [pit 01:49]: Done. ======================================================================== Board pit-arm-multi_lpae_defconfig failure log: ------------------------------------------------- [ 1.529726] usbhid: USB HID core driver [ 1.533626] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539977] isl29018 7-0044: Failed to read 1: -6 [ 1.544562] isl29018 7-0044: regmap initialization fails: -6 [ 1.555518] NET: Registered protocol family 10 [ 1.559946] sit: IPv6 over IPv4 tunneling driver [ 1.563531] NET: Registered protocol family 17 [ 1.567529] can: controller area network core (rev 20120528 abi 9) [ 1.573718] NET: Registered protocol family 29 [ 1.578107] can: raw protocol (rev 20120528) [ 1.582357] can: broadcast manager protocol (rev 20120528 t) [ 1.587999] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593724] Key type dns_resolver registered [ 1.598046] ThumbEE CPU extension supported. [ 1.601967] Registering SWP/SWPB emulation handler [ 1.611876] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617355] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623721] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629096] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638503] mmc0: mmc_select_hs200 failed, error 3 [ 1.643137] mmc0: error 3 whilst initialising MMC card [ 1.649975] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659773] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665377] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671607] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676984] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686677] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708304] Waiting for root device /dev/mmcblk0p1... [ 2.583407] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597571] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603034] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609405] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614789] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:56]: got exception: timeout ~$off [PYBOOT] [pit 01:58]: Done. ======================================================================== Board pit-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.529732] usbhid: USB HID core driver [ 1.533633] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539983] isl29018 7-0044: Failed to read 1: -6 [ 1.544567] isl29018 7-0044: regmap initialization fails: -6 [ 1.555521] NET: Registered protocol family 10 [ 1.559956] sit: IPv6 over IPv4 tunneling driver [ 1.563533] NET: Registered protocol family 17 [ 1.567535] can: controller area network core (rev 20120528 abi 9) [ 1.573724] NET: Registered protocol family 29 [ 1.578113] can: raw protocol (rev 20120528) [ 1.582362] can: broadcast manager protocol (rev 20120528 t) [ 1.588005] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593727] Key type dns_resolver registered [ 1.598052] ThumbEE CPU extension supported. [ 1.601972] Registering SWP/SWPB emulation handler [ 1.611890] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617370] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623736] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.629111] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638517] mmc0: mmc_select_hs200 failed, error 3 [ 1.643152] mmc0: error 3 whilst initialising MMC card [ 1.649990] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.659796] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665401] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671629] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.677007] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686702] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708326] Waiting for root device /dev/mmcblk0p1... [ 2.583418] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.597583] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603047] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609420] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614803] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [PYBOOT] [pit 01:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:56]: got exception: timeout ~$off [PYBOOT] [pit 01:57]: Done.

8 years, 6 months

arm-soc build: 20 warnings 2 failures (arm-soc/v4.7-rc1-41-g813f80a)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 813f80a ARM: SoC: Document merges Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v4.7-rc1-41-g813f80a/ Runtime: 13m 50s Passed: 118 Failed: 2 Warnings: 20 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/block/floppy.c:1777:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:1779:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4487:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:4495:45: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:810:44: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:825:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/block/floppy.c:826:43: warning: self-comparison always evaluates to true [-Wtautological-compare] 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 drivers/phy/phy-exynos-mipi-video.c:238:13: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/staging/iio/adc/ad7606_spi.c:24:18: warning: 'data' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 fs/reiserfs/ibalance.c:1156:2: warning: 'new_insert_key' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] 2 drivers/xen/balloon.c:154:13: warning: 'release_memory_resource' declared 'static' but never defined [-Wunused-function] Section mismatches:

8 years, 6 months

arm-soc build: 39 warnings 3 failures (arm-soc/v4.7-rc1-263-g48e65ed)

by Olof's autobuilder

Here are the build results from automated periodic testing. The tree being built was arm-soc, found at: http://git.kernel.org/cgit/linux/kernel/git/arm/arm-soc.git (for-next or to-build branch) Topmost commit: 48e65ed [SUBMITTED 20160603] sparc32: remove stale RTC_PORT definition Build logs (stderr only) can be found at the following link (experimental): http://arm-soc.lixom.net/buildlogs/arm-soc/v4.7-rc1-263-g48e65ed/ Runtime: 66m 41s Passed: 117 Failed: 3 Warnings: 39 Section mismatches: 0 ------------------------------------------------------------------------------- Failed defconfigs: arm64.allmodconfig arm64.allnoconfig powerpc.pasemi_defconfig ------------------------------------------------------------------------------- Errors: arm64.allmodconfig: /work/build/batch/samples/seccomp/bpf-fancy.c:13:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-helper.h:20:50: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/dropper.c:20:27: fatal error: linux/seccomp.h: No such file or directory /work/build/batch/samples/seccomp/bpf-direct.c:21:27: fatal error: linux/seccomp.h: No such file or directory arm64.allnoconfig: /work/build/batch/drivers/irqchip/irq-gic-v2m.c:90:23: error: 'pci_msi_domain_write_msg' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v2m.c:93:15: error: variable 'gicv2m_msi_domain_info' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v2m.c:94:2: error: unknown field 'flags' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v2m.c:94:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v2m.c:94:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v2m.c:95:6: error: 'MSI_FLAG_PCI_MSIX' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v2m.c:96:2: error: unknown field 'chip' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v2m.c:239:15: error: variable 'gicv2m_pmsi_ops' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v2m.c:242:15: error: variable 'gicv2m_pmsi_domain_info' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v2m.c:243:2: error: unknown field 'flags' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v2m.c:244:2: error: unknown field 'ops' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v2m.c:245:2: error: unknown field 'chip' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v2m.c:281:15: error: implicit declaration of function 'pci_msi_create_irq_domain' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v2m.c:284:16: error: implicit declaration of function 'platform_msi_create_irq_domain' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v2m.c:93:31: error: storage size of 'gicv2m_msi_domain_info' isn't known /work/build/batch/drivers/irqchip/irq-gic-v2m.c:239:30: error: storage size of 'gicv2m_pmsi_ops' isn't known /work/build/batch/drivers/irqchip/irq-gic-v2m.c:242:31: error: storage size of 'gicv2m_pmsi_domain_info' isn't known /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:40:23: error: 'pci_msi_domain_write_msg' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:52:18: error: implicit declaration of function 'pci_msi_vec_count' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:53:19: error: implicit declaration of function 'pci_msix_vec_count' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:69:21: error: unknown type name 'msi_alloc_info_t' /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:93:15: error: variable 'its_pci_msi_ops' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:94:2: error: unknown field 'msi_prepare' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:94:17: error: 'its_pci_msi_prepare' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:97:15: error: variable 'its_pci_msi_domain_info' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:98:2: error: unknown field 'flags' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:98:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:98:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:99:6: error: 'MSI_FLAG_MULTI_PCI_MSI' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:99:31: error: 'MSI_FLAG_PCI_MSIX' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:100:2: error: unknown field 'ops' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:101:2: error: unknown field 'chip' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:120:19: error: implicit declaration of function 'msi_get_domain_info' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:126:8: error: implicit declaration of function 'pci_msi_create_irq_domain' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:93:30: error: storage size of 'its_pci_msi_ops' isn't known /work/build/batch/drivers/irqchip/irq-gic-v3-its-pci-msi.c:97:31: error: storage size of 'its_pci_msi_domain_info' isn't known /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1259:17: error: unknown type name 'msi_alloc_info_t' /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1298:15: error: variable 'its_msi_domain_ops' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1299:2: error: unknown field 'msi_prepare' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1299:17: error: 'its_msi_prepare' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1324:2: error: unknown type name 'msi_alloc_info_t' /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1325:35: error: request for member 'scratchpad' in something not a structure or union /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1566:25: error: dereferencing pointer to incomplete type 'struct msi_domain_info' /work/build/batch/drivers/irqchip/irq-gic-v3-its.c:1298:30: error: storage size of 'its_msi_domain_ops' isn't known /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:28:18: error: unknown type name 'msi_alloc_info_t' /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:61:15: error: variable 'its_pmsi_ops' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:62:2: error: unknown field 'msi_prepare' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:62:17: error: 'its_pmsi_prepare' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:65:15: error: variable 'its_pmsi_domain_info' has initializer but incomplete type /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:66:2: error: unknown field 'flags' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:66:12: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:66:39: error: 'MSI_FLAG_USE_DEF_CHIP_OPS' undeclared here (not in a function) /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:67:2: error: unknown field 'ops' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:68:2: error: unknown field 'chip' specified in initializer /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:87:19: error: implicit declaration of function 'msi_get_domain_info' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:93:8: error: implicit declaration of function 'platform_msi_create_irq_domain' [-Werror=implicit-function-declaration] /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:61:30: error: storage size of 'its_pmsi_ops' isn't known /work/build/batch/drivers/irqchip/irq-gic-v3-its-platform-msi.c:65:31: error: storage size of 'its_pmsi_domain_info' isn't known powerpc.pasemi_defconfig: /work/build/batch/arch/powerpc/kernel/ptrace.c:379:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] /work/build/batch/arch/powerpc/kernel/ptrace.c:407:104: error: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Werror=array-bounds] Warnings: 1 drivers/infiniband/core/cma.c:1253:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] 1 drivers/irqchip/irq-gic-v2m.c:243:11: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v2m.c:244:9: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v2m.c:245:10: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v2m.c:281:13: warning: assignment makes pointer from integer without a cast [-Wint-conversion] 1 drivers/irqchip/irq-gic-v2m.c:284:14: warning: assignment makes pointer from integer without a cast [-Wint-conversion] 1 drivers/irqchip/irq-gic-v2m.c:94:11: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v2m.c:96:10: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its.c:1133:27: warning: 'its_find_device' defined but not used [-Wunused-function] 1 drivers/irqchip/irq-gic-v3-its.c:1164:27: warning: 'its_create_device' defined but not used [-Wunused-function] 1 drivers/irqchip/irq-gic-v3-its.c:1299:17: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-pci-msi.c:100:9: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-pci-msi.c:101:10: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-pci-msi.c:58:12: warning: 'its_get_pci_alias' defined but not used [-Wunused-function] 1 drivers/irqchip/irq-gic-v3-its-pci-msi.c:94:17: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-pci-msi.c:98:11: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-platform-msi.c:62:17: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-platform-msi.c:66:11: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-platform-msi.c:67:9: warning: excess elements in struct initializer 1 drivers/irqchip/irq-gic-v3-its-platform-msi.c:68:10: warning: excess elements in struct initializer 1 drivers/of/of_reserved_mem.c:131:180: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:182: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:364: warning: comparison of distinct pointer types lacks a cast 1 drivers/of/of_reserved_mem.c:131:368: warning: comparison of distinct pointer types lacks a cast 1 include/sound/control.h:219:9: warning: 'master_vol' may be used uninitialized in this function [-Wmaybe-uninitialized] 2 buildall.arm64.allnoconfig.log.failed:warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which has unmet direct dependencies (PCI) 2 buildall.arm64.allnoconfig.log.failed:warning: (ARM64) selects ARM_GIC_V2M which has unmet direct dependencies (ARM_GIC && PCI) 10 arch/arm/include/debug/none.S:2:2: warning: #warning DEBUG_LL not configured, disabling [-Wcpp] Section mismatches:

8 years, 6 months

arm-soc boot: 18 passed 35 failed (arm-soc/v4.7-rc1-263-g48e65ed)

by Olof's autobooter

Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.7-rc1-263-g48e65ed/ Failed boards: arndale arm-multi_v7_defconfig : FAILED 1:45.99 arndale arm-multi_lpae_defconfig : FAILED 1:51.46 arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-multi_v7_defconfig : FAILED 0:59.38 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 0:59.39 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:49.34 beaver arm-multi_v7_defconfig : FAILED 1:09.46 beaver multi_v7_nosmp_defconfig : NO BUILD capri arm-multi_v7_defconfig : FAILED 1:31.26 capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus arm-multi_v7_defconfig : FAILED 0:58.56 colombus arm-multi_lpae_defconfig : FAILED 0:58.45 colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-multi_v7_defconfig : FAILED 1:59.01 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie arm-multi_v7_defconfig : FAILED 1:04.17 cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 arm-multi_v7_defconfig : FAILED 1:04.54 cubie2 arm-multi_lpae_defconfig : FAILED 1:31.91 cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox arm-multi_v7_defconfig : FAILED 1:14.26 cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-multi_v7_defconfig : FAILED 1:11.89 dalmore arm-multi_lpae_defconfig : FAILED 1:37.96 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 arm-multi_v7_defconfig : FAILED 1:01.53 jetsontk1 arm-multi_lpae_defconfig : FAILED 1:34.03 jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:04.78 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.48 omap5uevm arm-multi_v7_defconfig : FAILED 1:20.89 omap5uevm arm-multi_lpae_defconfig : FAILED 1:33.62 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella arm-multi_v7_defconfig : FAILED 1:46.80 parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:47.88 pi arm-multi_v7_defconfig : FAILED 1:17.00 pi arm-multi_lpae_defconfig : FAILED 1:41.84 pi multi_v7_nosmp_defconfig : NO BUILD pit arm-exynos_defconfig : FAILED 1:51.91 pit arm-multi_v7_defconfig : FAILED 1:13.37 pit arm-multi_lpae_defconfig : FAILED 1:21.16 pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-multi_v7_defconfig : FAILED 1:05.65 seaboard multi_v7_nosmp_defconfig : NO BUILD seattle arm64-defconfig : FAILED 2:04.13 snow arm-multi_v7_defconfig : FAILED 1:25.37 snow arm-multi_lpae_defconfig : FAILED 1:14.71 snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-multi_v7_defconfig : FAILED 0:52.66 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-multi_v7_defconfig : FAILED 1:03.49 wandboard multi_v7_nosmp_defconfig : NO BUILD Successful boards: apc arm-vt8500_v6_v7_defconfig : passed 1:18.02 arndale arm-exynos_defconfig : passed 1:35.93 bbb arm-omap2plus_defconfig : passed 1:40.36 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:57.31 capri arm-bcm_defconfig : passed 0:53.85 chitra powerpc-ppc64_defconfig : passed 2:39.22 colombus arm-sunxi_defconfig : passed 2:25.00 cosmic arm-imx_v6_v7_defconfig : passed 3:22.71 cubie arm-sunxi_defconfig : passed 0:49.50 cubie2 arm-sunxi_defconfig : passed 0:51.09 cubox arm-mvebu_v7_defconfig : passed 1:40.61 dalmore arm-tegra_defconfig : warnings 1:31.72 jetsontk1 arm-tegra_defconfig : warnings 0:54.70 seaboard arm-tegra_defconfig : warnings 1:01.92 snow arm-exynos_defconfig : passed 2:12.49 snowball arm-u8500_defconfig : passed 1:18.72 trimslice arm-tegra_defconfig : warnings 1:39.79 wandboard arm-imx_v6_v7_defconfig : passed 1:17.23 Offline boards: bbb arm-multi_v7_defconfig : OFFLINE 1:39.58 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.18 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:30.41 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:38.48 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.47 pandaes arm-omap2plus_defconfig : OFFLINE 2:18.68 pandaes arm-multi_v7_defconfig : OFFLINE 2:48.33 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:06.37 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.28 sama5 arm-sama5_defconfig : OFFLINE 2:29.34 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.41 socfpga arm-socfpga_defconfig : OFFLINE 2:27.17 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.17 trimslice arm-multi_v7_defconfig : OFFLINE 2:47.25 Board legend is available at http://arm-soc.lixom.net/boards.html Last entries of failed logs below: ======================================================================== Board arndale-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ARNDALE5250 # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 ARNDALE5250 # tftp 0x46000000 tmp/arndale-7Sx7u6/exynos5250-arndale.dtb tftp 0x46000000 tmp/arndale-7Sx7u6/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.125 Filename 'tmp/arndale-7Sx7u6/exynos5250-arndale.dtb'. Load address: 0x46000000 Loading: *T ### done Bytes transferred = 42638 (a68e hex) ARNDALE5250 # bootm 0x43000000 - 0x46000000 [PYBOOT] [arndale 01:11]: u-boot: jumping to kernel image bootm 0x43000000 - 0x46000000 ## Booting kernel from Legacy Image at 43000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7017896 Bytes = 6.7 MiB Load Address: 40208000 Entry Point: 40208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 46000000 Booting using the fdt blob at 0x46000000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff2000, end 4ffff68d ... OK Starting kernel ... [PYBOOT] [arndale 01:13]: u-boot: started kernel. [PYBOOT] [arndale 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 01:49]: got exception: timeout ~$off [PYBOOT] [arndale 01:50]: Done. ======================================================================== Board arndale-arm-multi_v7_defconfig failure log: ------------------------------------------------- ARNDALE5250 # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 ARNDALE5250 # tftp 0x46000000 tmp/arndale-qIMtmt/exynos5250-arndale.dtb tftp 0x46000000 tmp/arndale-qIMtmt/exynos5250-arndale.dtb Waiting for Ethernet connection... done. Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.125 Filename 'tmp/arndale-qIMtmt/exynos5250-arndale.dtb'. Load address: 0x46000000 Loading: *T ### done Bytes transferred = 42638 (a68e hex) ARNDALE5250 # bootm 0x43000000 - 0x46000000 [PYBOOT] [arndale 01:04]: u-boot: jumping to kernel image bootm 0x43000000 - 0x46000000 ## Booting kernel from Legacy Image at 43000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7017896 Bytes = 6.7 MiB Load Address: 40208000 Entry Point: 40208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 46000000 Booting using the fdt blob at 0x46000000 Loading Kernel Image ... OK OK Loading Device Tree to 4fff2000, end 4ffff68d ... OK Starting kernel ... [PYBOOT] [arndale 01:07]: u-boot: started kernel. [PYBOOT] [arndale 01:42]: Timed out waiting for "<type 'str'>": [PYBOOT] [arndale 01:43]: got exception: timeout ~$off [PYBOOT] [arndale 01:44]: Done. ======================================================================== Board beagleboard-x15-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ######################## 2.4 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-fMlKoA/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-fMlKoA/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-fMlKoA/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.4 MiB/s done Bytes transferred = 85472 (14de0 hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [beagleboard-x15 00:21]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffddf ... OK Starting kernel ... [PYBOOT] [beagleboard-x15 00:21]: u-boot: started kernel. [PYBOOT] [beagleboard-x15 00:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 00:57]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 00:58]: Done. ======================================================================== Board beagleboard-x15-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ######################## 2.4 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/beagleboard-x15-b07P4e/am57xx-beagle-x15.dtb tftp 0x82000000 tmp/beagleboard-x15-b07P4e/am57xx-beagle-x15.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.20.2; our IP address is 172.16.20.126 Filename 'tmp/beagleboard-x15-b07P4e/am57xx-beagle-x15.dtb'. Load address: 0x82000000 Loading: *###### 2.4 MiB/s done Bytes transferred = 85472 (14de0 hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [beagleboard-x15 00:21]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Loading Device Tree to 8ffe8000, end 8ffffddf ... OK Starting kernel ... [PYBOOT] [beagleboard-x15 00:21]: u-boot: started kernel. [PYBOOT] [beagleboard-x15 00:56]: Timed out waiting for "<type 'str'>": [PYBOOT] [beagleboard-x15 00:57]: got exception: timeout ~$off [PYBOOT] [beagleboard-x15 00:58]: Done. ======================================================================== Board beaver-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra30 (Beaver) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra30 (Beaver) # tftp 0x83000000 tmp/beaver-rln3vp/tegra30-beaver.dtb tftp 0x83000000 tmp/beaver-rln3vp/tegra30-beaver.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.117 Filename 'tmp/beaver-rln3vp/tegra30-beaver.dtb'. Load address: 0x83000000 Loading: *#### 2.6 MiB/s done Bytes transferred = 51511 (c937 hex) Tegra30 (Beaver) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 [PYBOOT] [beaver 00:30]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff0000, end 8ffff936 ... OK Starting kernel ... [PYBOOT] [beaver 00:30]: u-boot: started kernel. [PYBOOT] [beaver 01:05]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:06]: got exception: timeout ~$off [PYBOOT] [beaver 01:08]: Done. ======================================================================== Board beaver-arm-tegra_defconfig failure log: ------------------------------------------------- [ 6.494237] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.501277] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.506883] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.514409] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.524409] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.537059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.543700] [drm] No driver support for vblank timestamp query. [ 6.549705] drm drm: No connectors reported connected with modes [ 6.555730] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.581248] Console: switching to colour frame buffer device 128x48 [ 6.593047] drm drm: fb0: frame buffer device [ 6.620818] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.630102] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.636578] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.642010] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.649983] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.670819] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.678439] hub 1-0:1.0: USB hub found [ 6.682237] hub 1-0:1.0: 1 port detected [ 6.687045] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.692487] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.700356] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.720816] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.728315] hub 2-0:1.0: USB hub found [ 6.732102] hub 2-0:1.0: 1 port detected [ 6.740271] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.758503] vdd_sata,avdd_plle: disabling [ 6.763002] usb1_vbus: disabling [ 6.766411] ALSA device list: [ 6.769368] #0: NVIDIA Tegra Beaver [ 6.773619] Waiting for root device /dev/mmcblk0p1... [ 7.050824] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.036255] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>": [PYBOOT] [beaver 01:47]: got exception: timeout ~$off [PYBOOT] [beaver 01:48]: Done. ======================================================================== Board capri-arm-multi_v7_defconfig failure log: ------------------------------------------------- .. downloading of 7017896 bytes finished Flashing Raw Image Writing to partition 'kernel' WrOKAY [ 0.899s] finished. total time: 2.865s iting 'kernel' DONE! GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.019s] writing 'device-tree'... OKAY [ 0.011s] finished. total time: 0.030s resuming boot... downloading of 8131 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-tree' DONE! GET_DESC ->STRING DESC OKAY [ 0.005s] MMC read: dev # 0, block # 72320, count 16384 ... finished. total time: 0.012s FASTBOOT DONE 16384 blocks read: OK MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004fc2 Starting kernel ... [PYBOOT] [capri 01:28]: Timed out waiting for "<type 'str'>": [PYBOOT] [capri 01:29]: got exception: timeout ~$off [PYBOOT] [capri 01:30]: Done. ======================================================================== Board colombus-arm-multi_lpae_defconfig failure log: ------------------------------------------------- fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-d7qUjj/zImagejhwHIIRQ: reset KIRQ: reset (user:build) Load fastboot kernel address:97, speed:3, bulk_ep_size:512, fifo_size:512 usb enter high speed SetAddress: 97 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x61 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 creating boot image... creating boot image - 7045120 bytes downloading 'boot.img'... download FastBot:Starting download of 6 MB Downloading 0 MB ...Downloading 1 MB ...Downloading 2 MB ...Downloading 3 MB ...Downloading 4 MB ...Downloading 5 MB ...Downloading 5 MB ...OKAY [ 1.981s] booting... OKAY [ 0.004s] finished. total time: 1.986s downloading of 6 MB finished Downloading 6 MB ...boot FASTBOOT DONE Booting raw image.. ## Starting application at 0x41000800 ... [PYBOOT] [colombus 00:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 00:56]: got exception: timeout ~$off [PYBOOT] [colombus 00:58]: Done. ======================================================================== Board colombus-arm-multi_v7_defconfig failure log: ------------------------------------------------- fifo_size = 0x200 Fastboot entered boot tIRQ: suspend mp/colombus-HIqcEb/zImageuHJRcIRQ: reset 0IRQ: reset address:96, speed:3, bulk_ep (user:build) Load fastboot kernel _size:512, fifo_size:512 usb enter high speed SetAddress: 96 fastboot_bulk_endpoint_reset usb_base = 0x1c19000 sram_base = 0x1c00000 ccmu_base = 0x1c20000 address = 0x60 speed = 0x3 bulk_ep_size = 0x200 fifo_size = 0x200 creating boot image... creating boot image - 7045120 bytes downloading 'boot.img'... download FastBot:Starting download of 6 MB Downloading 0 MB ...Downloading 1 MB ...Downloading 2 MB ...Downloading 3 MB ...Downloading 4 MB ...Downloading 5 MB ...Downloading 5 MB ... downloading of 6 MB finished Downloading 6 MB ...OKAY [ 2.040s] booting... OKAY [ 0.002s] finished. total time: 2.042s boot FASTBOOT DONE Booting raw image.. ## Starting application at 0x41000800 ... [PYBOOT] [colombus 00:55]: Timed out waiting for "<type 'str'>": [PYBOOT] [colombus 00:56]: got exception: timeout ~$off [PYBOOT] [colombus 00:58]: Done. ======================================================================== Board cosmic-arm-multi_v7_defconfig failure log: ------------------------------------------------- => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 => tftp 0x84000000 tmp/cosmic-DE7yOc/vf610-cosmic.dtb tftp 0x84000000 tmp/cosmic-DE7yOc/vf610-cosmic.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.114 Filename 'tmp/cosmic-DE7yOc/vf610-cosmic.dtb'. Load address: 0x84000000 Loading: *## 699.2 KiB/s done Bytes transferred = 15773 (3d9d hex) => bootm ${loadaddr} - 0x84000000 [PYBOOT] [cosmic 01:07]: u-boot: jumping to kernel image bootm ${loadaddr} - 0x84000000 ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7017896 Bytes = 6.7 MiB Load Address: 80208000 Entry Point: 80208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 84000000 Booting using the fdt blob at 0x84000000 Loading Kernel Image ... OK Using Device Tree in place at 84000000, end 84006d9c Using machid 0xffffffff from environment Starting kernel ... [PYBOOT] [cosmic 01:15]: u-boot: started kernel. [PYBOOT] [cosmic 01:54]: Timed out waiting for "<type 'str'>": [PYBOOT] [cosmic 01:55]: got exception: timeout ~$off [PYBOOT] [cosmic 01:56]: Done. ======================================================================== Board cubie-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 3.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) sun4i#setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 sun4i#tftp 0x48000000 tmp/cubie-1fekVN/sun4i-a10-cubieboard.dtb tftp 0x48000000 tmp/cubie-1fekVN/sun4i-a10-cubieboard.dtb Using emac device TFTP from server 172.16.20.2; our IP address is 172.16.20.101 Filename 'tmp/cubie-1fekVN/sun4i-a10-cubieboard.dtb'. Load address: 0x48000000 Loading: *## 3.2 MiB/s done Bytes transferred = 26598 (67e6 hex) sun4i#bootz 0x42000000 - 0x48000000 ; bootm 0x42000000 - 0x48000000 [PYBOOT] [cubie 00:25]: u-boot: jumping to kernel image bootz 0x42000000 - 0x48000000 ; bootm 0x42000000 - 0x48000000 Kernel image @ 0x42000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 48000000 Booting using the fdt blob at 0x48000000 Using Device Tree in place at 48000000, end 480097e5 Starting kernel ... [PYBOOT] [cubie 00:25]: u-boot: started kernel. [PYBOOT] [cubie 01:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [cubie 01:01]: got exception: timeout ~$off [PYBOOT] [cubie 01:02]: Done. ======================================================================== Board cubie2-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 3.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) sun7i# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 sun7i# tftp 0x44000000 tmp/cubie2-4_RTQ8/sun7i-a20-cubieboard2.dtb tftp 0x44000000 tmp/cubie2-4_RTQ8/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.20.2; our IP address is 172.16.20.104 Filename 'tmp/cubie2-4_RTQ8/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *### 3.7 MiB/s done Bytes transferred = 30773 (7835 hex) sun7i# bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 [PYBOOT] [cubie2 00:53]: u-boot: jumping to kernel image bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Using Device Tree in place at 44000000, end 4400a834 Starting kernel ... [PYBOOT] [cubie2 00:53]: u-boot: started kernel. [PYBOOT] [cubie2 01:28]: Timed out waiting for "<type 'str'>": [PYBOOT] [cubie2 01:29]: got exception: timeout ~$off [PYBOOT] [cubie2 01:30]: Done. ======================================================================== Board cubie2-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 3.9 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) sun7i# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 sun7i# tftp 0x44000000 tmp/cubie2-9oFNyP/sun7i-a20-cubieboard2.dtb tftp 0x44000000 tmp/cubie2-9oFNyP/sun7i-a20-cubieboard2.dtb Using emac device TFTP from server 172.16.20.2; our IP address is 172.16.20.104 Filename 'tmp/cubie2-9oFNyP/sun7i-a20-cubieboard2.dtb'. Load address: 0x44000000 Loading: *### 3.7 MiB/s done Bytes transferred = 30773 (7835 hex) sun7i# bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 [PYBOOT] [cubie2 00:26]: u-boot: jumping to kernel image bootz 0x42000000 - 0x44000000 ; bootm 0x42000000 - 0x44000000 Kernel image @ 0x42000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 44000000 Booting using the fdt blob at 0x44000000 Using Device Tree in place at 44000000, end 4400a834 Starting kernel ... [PYBOOT] [cubie2 00:26]: u-boot: started kernel. [PYBOOT] [cubie2 01:01]: Timed out waiting for "<type 'str'>": [PYBOOT] [cubie2 01:02]: got exception: timeout ~$off [PYBOOT] [cubie2 01:03]: Done. ======================================================================== Board cubox-arm-multi_v7_defconfig failure log: ------------------------------------------------- Using egiga0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.124 Filename 'tmp/cubox-im4BLt/tmpdxcof6-uImage'. Load address: 0x2000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################### done Bytes transferred = 7033545 (6b52c9 hex) CuBox>> bootm 0x02000000 [PYBOOT] [cubox 00:33]: u-boot: jumping to kernel image bootm 0x02000000 ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux Created: 2016-06-05 9:38:37 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7033481 Bytes = 6.7 MB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [PYBOOT] [cubox 00:35]: u-boot: started kernel. [PYBOOT] [cubox 01:11]: Timed out waiting for "<type 'str'>": [PYBOOT] [cubox 01:12]: got exception: timeout ~$off [PYBOOT] [cubox 01:13]: Done. ======================================================================== Board dalmore-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra114 (Dalmore) # tftp 0x83000000 tmp/dalmore-e4nsXv/tegra114-dalmore.dtb tftp 0x83000000 tmp/dalmore-e4nsXv/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.103 Filename 'tmp/dalmore-e4nsXv/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.6 MiB/s done Bytes transferred = 34956 (888c hex) Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 [PYBOOT] [dalmore 01:00]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff88b ... OK Starting kernel ... [PYBOOT] [dalmore 01:00]: u-boot: started kernel. [PYBOOT] [dalmore 01:35]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:36]: got exception: timeout ~$off [PYBOOT] [dalmore 01:37]: Done. ======================================================================== Board dalmore-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.7 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra114 (Dalmore) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra114 (Dalmore) # tftp 0x83000000 tmp/dalmore-r7REWx/tegra114-dalmore.dtb tftp 0x83000000 tmp/dalmore-r7REWx/tegra114-dalmore.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.103 Filename 'tmp/dalmore-r7REWx/tegra114-dalmore.dtb'. Load address: 0x83000000 Loading: *### 2.6 MiB/s done Bytes transferred = 34956 (888c hex) Tegra114 (Dalmore) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 [PYBOOT] [dalmore 00:33]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8fff4000, end 8ffff88b ... OK Starting kernel ... [PYBOOT] [dalmore 00:33]: u-boot: started kernel. [PYBOOT] [dalmore 01:08]: Timed out waiting for "<type 'str'>": [PYBOOT] [dalmore 01:09]: got exception: timeout ~$off [PYBOOT] [dalmore 01:10]: Done. ======================================================================== Board jetsontk1-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra124 (Jetson TK1) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra124 (Jetson TK1) # tftp 0x83000000 tmp/jetsontk1-KzMWfx/tegra124-jetson-tk1.dtb tftp 0x83000000 tmp/jetsontk1-KzMWfx/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.109 Filename 'tmp/jetsontk1-KzMWfx/tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 2.7 MiB/s done Bytes transferred = 66737 (104b1 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 [PYBOOT] [jetsontk1 00:56]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8ffec000, end 8ffff4b0 ... OK Starting kernel ... [PYBOOT] [jetsontk1 00:56]: u-boot: started kernel. [PYBOOT] [jetsontk1 01:31]: Timed out waiting for "<type 'str'>": [PYBOOT] [jetsontk1 01:32]: got exception: timeout ~$off [PYBOOT] [jetsontk1 01:33]: Done. ======================================================================== Board jetsontk1-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra124 (Jetson TK1) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra124 (Jetson TK1) # tftp 0x83000000 tmp/jetsontk1-QTOjjg/tegra124-jetson-tk1.dtb tftp 0x83000000 tmp/jetsontk1-QTOjjg/tegra124-jetson-tk1.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.109 Filename 'tmp/jetsontk1-QTOjjg/tegra124-jetson-tk1.dtb'. Load address: 0x83000000 Loading: *##### 2.8 MiB/s done Bytes transferred = 66737 (104b1 hex) Tegra124 (Jetson TK1) # bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 [PYBOOT] [jetsontk1 00:23]: u-boot: jumping to kernel image bootz 0x82000000 - 0x83000000 ; bootm 0x82000000 - 0x83000000 Kernel image @ 0x82000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Device Tree to 8ffec000, end 8ffff4b0 ... OK Starting kernel ... [PYBOOT] [jetsontk1 00:23]: u-boot: started kernel. [PYBOOT] [jetsontk1 00:58]: Timed out waiting for "<type 'str'>": [PYBOOT] [jetsontk1 00:59]: got exception: timeout ~$off [PYBOOT] [jetsontk1 01:01]: Done. ======================================================================== Board odroidu3-arm-exynos_defconfig failure log: ------------------------------------------------- [ 1.777649] usbhid: USB HID core driver [ 1.786119] NET: Registered protocol family 10 [ 1.791752] sit: IPv6 over IPv4 tunneling driver [ 1.792225] NET: Registered protocol family 17 [ 1.795154] NET: Registered protocol family 15 [ 1.799631] Key type dns_resolver registered [ 1.803980] Registering SWP/SWPB emulation handler [ 1.811902] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.816544] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.823924] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.831072] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.837656] [drm] No driver support for vblank timestamp query. [ 1.843573] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.849920] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.855123] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.862336] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.871419] mmc1: new high speed MMC card at address 0001 [ 1.881927] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.882219] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.887080] max98090 1-0010: MAX98090 REVID=0x43 [ 1.891993] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.893590] max98090 1-0010: use default 2.8v micbias [ 1.902804] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.909554] mmcblk1: p1 p2 [ 1.910755] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.920223] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.957250] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.977145] VDD10_HDMI_1.0V: disabling [ 1.977862] vdd_g3d: disabling [ 1.978931] BUCK8_2.8V: disabling [ 1.982951] ALSA device list: [ 1.984538] #0: Odroid-U3 [ 1.988338] Waiting for root device /dev/mmcblk0p2... [PYBOOT] [odroidu3 02:01]: Timed out waiting for "<type 'str'>": [PYBOOT] [odroidu3 02:02]: got exception: timeout ~$off [PYBOOT] [odroidu3 02:03]: Done. ======================================================================== Board omap5uevm-arm-multi_lpae_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ######################## 858.4 KiB/s done Bytes transferred = 7017896 (6b15a8 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/omap5uevm-6FDGAH/omap5-uevm.dtb tftp 0x82000000 tmp/omap5uevm-6FDGAH/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.102 Filename 'tmp/omap5uevm-6FDGAH/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *EHCI timed out on TD - token=0x88008d80 T #### 9.8 KiB/s done Bytes transferred = 53837 (d24d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:55]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8201024c Starting kernel ... [PYBOOT] [omap5uevm 00:55]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:30]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:31]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:32]: Done. ======================================================================== Board omap5uevm-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ######################## 851.6 KiB/s done Bytes transferred = 7017896 (6b15a8 hex) U-Boot# setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 U-Boot# tftp 0x82000000 tmp/omap5uevm-LeHaUe/omap5-uevm.dtb tftp 0x82000000 tmp/omap5uevm-LeHaUe/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.102 Filename 'tmp/omap5uevm-LeHaUe/omap5-uevm.dtb'. Load address: 0x82000000 Loading: *T #### 8.8 KiB/s done Bytes transferred = 53837 (d24d hex) U-Boot# bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 [PYBOOT] [omap5uevm 00:42]: u-boot: jumping to kernel image bootz 0x81000000 - 0x82000000 ; bootm 0x81000000 - 0x82000000 Kernel image @ 0x81000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 82000000 Booting using the fdt blob at 0x82000000 Using Device Tree in place at 82000000, end 8201024c Starting kernel ... [PYBOOT] [omap5uevm 00:42]: u-boot: started kernel. [PYBOOT] [omap5uevm 01:17]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 01:18]: got exception: timeout ~$off [PYBOOT] [omap5uevm 01:20]: Done. ======================================================================== Board omap5uevm-arm-omap2plus_defconfig failure log: ------------------------------------------------- [ 3.996465] ldo9: bypassed regulator has no supply! [ 4.001592] ldo9: failed to get the current voltage(-517) [ 4.007260] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030204] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.037746] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044312] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050624] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057471] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067057] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076546] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083605] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.089735] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096033] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.102889] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112460] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.121954] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.128981] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.169922] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.176223] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.183090] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.192675] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.202156] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.209192] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.229590] smps9: Bringing 0uV into 2100000-2100000uV [ 4.257883] ldo9: bypassed regulator has no supply! [ 4.263016] ldo9: failed to get the current voltage(-517) [ 4.268676] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.288773] hctosys: unable to open rtc device (rtc0) [ 4.294092] sr_init: No PMIC hook to init smartreflex [ 4.299591] sr_init: platform driver register failed for SR [ 4.327183] pbias_mmc_omap5: disabling [ 4.331146] vmmcsdio_fixed: disabling [ 4.337350] Waiting for root device /dev/mmcblk1p2... [PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off [PYBOOT] [omap5uevm 02:05]: Done. ======================================================================== Board parallella-arm-multi_v7_defconfig failure log: ------------------------------------------------- Bytes transferred = 7017960 (6b15e8 hex) zynq-uboot> setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 zynq-uboot> tftp 0x2a00000 tmp/parallella-LpKfbr/zynq-parallella.dtb tftp 0x2a00000 tmp/parallella-LpKfbr/zynq-parallella.dtb Using zynq_gem device TFTP from server 172.16.20.2; our IP address is 172.16.20.106 Filename 'tmp/parallella-LpKfbr/zynq-parallella.dtb'. Load address: 0x2a00000 Loading: *# done Bytes transferred = 8121 (1fb9 hex) zynq-uboot> bootm 0x3800000 - 0x2a00000 [PYBOOT] [parallella 01:05]: u-boot: jumping to kernel image bootm 0x3800000 - 0x2a00000 ## Booting kernel from Legacy Image at 03800000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7017896 Bytes = 6.7 MiB Load Address: 03208000 Entry Point: 03208000 Verifying Checksum ... OK ## Flattened Device Tree blob at 02a00000 Booting using the fdt blob at 0x02a00000 Loading Kernel Image ... OK OK Loading Device Tree to 1fffb000, end 1fffffb8 ... OK Starting kernel ... [PYBOOT] [parallella 01:08]: u-boot: started kernel. [PYBOOT] [parallella 01:43]: Timed out waiting for "<type 'str'>": [PYBOOT] [parallella 01:44]: got exception: timeout ~$off [PYBOOT] [parallella 01:46]: Done. ======================================================================== Board pi-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.749099] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.756243] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.762291] [drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations [ 2.762372] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) [ 2.762451] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) [ 2.785080] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.789918] usb 1-1: Manufacturer: Generic [ 2.794076] usb 1-1: SerialNumber: 200901010001 [ 2.800673] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.835626] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.848093] mmc2: new high speed SDIO card at address 0001 [ 2.870659] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) [ 2.877009] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) [ 2.884137] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.890728] [drm] No driver support for vblank timestamp query. [ 2.897487] exynos-dp 145b0000.dp-controller: EDID data does not include any extensions. [ 2.918953] exynos-dp 145b0000.dp-controller: Link Training Clock Recovery success [ 2.920687] exynos-dp 145b0000.dp-controller: Link Training success! [ 2.925273] exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok [ 2.925276] exynos-dp 145b0000.dp-controller: unable to config video [ 3.010252] Console: switching to colour frame buffer device 274x77 [ 3.102183] exynos-drm exynos-drm: fb0: frame buffer device [ 3.120125] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.125176] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.132644] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.155192] vdd_1v2_2: disabling [ 3.157102] TPS65090_RAILSDCDC3: disabling [ 3.161055] TPS65090_RAILSLDO1: disabling [ 3.165014] TPS65090_RAILSLDO2: disabling [ 3.169540] ALSA device list: [ 3.171973] #0: Peach-Pi-I2S-MAX98091 [ 3.176604] Waiting for root device /dev/mmcblk0p1... [ 28.170138] random: nonblocking pool is initialized [PYBOOT] [pi 01:45]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:46]: got exception: timeout ~$off [PYBOOT] [pi 01:47]: Done. ======================================================================== Board pi-arm-multi_lpae_defconfig failure log: ------------------------------------------------- T [PYBOOT] [pi 00:57]: u-boot: started kernel. imer summary in microseconds: Mark Elapsed Stage 0 0 reset 127,959 127,959 board_init_f 172,529 44,570 board_init_r 238,657 66,128 id=64 240,463 1,806 main_loop 1,057,729 817,266 usb_start 4,887,039 3,829,310 id=80 4,887,040 1 eth_start 5,391,590 504,550 bootp_start 10,234,242 4,842,652 bootp_stop 10,234,245 3 id=81 10,234,262 17 id=82 11,420,800 1,186,538 tftp_start 13,508,235 2,087,435 id=84 13,508,236 1 tftp_done 15,279,874 1,771,638 bootm_start 15,279,875 1 id=1 15,284,652 4,777 id=2 15,284,655 3 id=3 15,340,585 55,930 id=4 15,340,586 1 id=5 15,340,587 1 id=6 15,362,450 21,863 id=7 15,374,322 11,872 id=15 15,376,451 2,129 start_kernel Accumulated time: 6,951 SPI read [PYBOOT] [pi 01:36]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:37]: got exception: timeout ~$off [PYBOOT] [pi 01:38]: Done. ======================================================================== Board pi-arm-multi_v7_defconfig failure log: ------------------------------------------------- [PYBOOT] [pi 00:34]: u-boot: started kernel. Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 128,305 128,305 board_init_f 172,958 44,653 board_init_r 239,112 66,154 id=64 240,918 1,806 main_loop 1,040,584 799,666 usb_start 4,909,026 3,868,442 id=80 4,909,026 0 eth_start 5,413,567 504,541 bootp_start 10,423,533 5,009,966 bootp_stop 10,423,536 3 id=81 10,423,553 17 id=82 11,602,710 1,179,157 tftp_start 13,687,134 2,084,424 id=84 13,687,135 1 tftp_done 15,456,081 1,768,946 bootm_start 15,456,082 1 id=1 15,460,862 4,780 id=2 15,460,865 3 id=3 15,516,796 55,931 id=4 15,516,797 1 id=6 15,516,797 0 id=5 15,538,652 21,855 id=7 15,550,516 11,864 id=15 15,552,644 2,128 start_kernel Accumulated time: 7,009 SPI read [PYBOOT] [pi 01:12]: Timed out waiting for "<type 'str'>": [PYBOOT] [pi 01:13]: got exception: timeout ~$off [PYBOOT] [pi 01:14]: Done. ======================================================================== Board pit-arm-exynos_defconfig failure log: ------------------------------------------------- [ 2.707189] big.LITTLE switcher initializing [ 2.711432] bL_switcher_halve_cpus: no CPU pairing possible [ 2.716981] big.LITTLE switcher initialization failed [ 2.734407] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.738599] s3c-rtc 101e0000.rtc: warning: invalid RTC value so initializing it [ 2.746010] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.753819] asix 3-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.763430] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.763475] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.763483] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.763497] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 2.763675] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 2.791312] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 2.791948] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 2.792283] usb 1-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.792288] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.792291] usb 1-1: Product: WebCam SC-10HDM13631N [ 2.792295] usb 1-1: Manufacturer: Generic [ 2.792298] usb 1-1: SerialNumber: 200901010001 [ 2.802363] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 2.828982] vdd_1v2_2: disabling [ 2.829143] TPS65090_RAILSDCDC3: disabling [ 2.835233] lcd_vdd: disabling [ 2.838239] TPS65090_RAILSLDO1: disabling [ 2.838243] TPS65090_RAILSLDO2: disabling [ 2.838757] ALSA device list: [ 2.838760] #0: Peach-Pit-I2S-MAX98090 [ 2.884251] Waiting for root device /dev/mmcblk0p1... [ 2.889915] Power domain power-domain@10044120 disable failed [ 2.897432] Power domain power-domain@10044020 disable failed [ 2.922441] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.934907] mmc2: new high speed SDIO card at address 0001 [ 42.890138] random: nonblocking pool is initialized [PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:49]: got exception: timeout ~$off [PYBOOT] [pit 01:50]: Done. ======================================================================== Board pit-arm-multi_lpae_defconfig failure log: ------------------------------------------------- Timer summary in microseconds: Mark Elapsed Stage [PYBOOT] [pit 00:42]: u-boot: started kernel. 0 0 reset 128,752 128,752 board_init_f 173,707 44,955 board_init_r 242,588 68,881 id=64 244,394 1,806 main_loop 1,083,653 839,259 usb_start 4,954,561 3,870,908 id=80 4,954,561 0 eth_start 5,459,110 504,549 bootp_start 10,468,002 5,008,892 bootp_stop 10,468,005 3 id=81 10,468,022 17 id=82 11,736,774 1,268,752 tftp_start 14,004,187 2,267,413 id=84 14,004,188 1 tftp_done 15,907,391 1,903,203 id=1 15,907,391 0 bootm_start 15,912,170 4,779 id=2 15,912,172 2 id=3 15,968,104 55,932 id=4 15,968,105 1 id=6 15,968,105 0 id=5 15,989,950 21,845 id=7 16,001,816 11,866 id=15 16,003,943 2,127 start_kernel Accumulated time: 7,026 SPI read [PYBOOT] [pit 01:18]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:19]: got exception: timeout ~$off [PYBOOT] [pit 01:20]: Done. ======================================================================== Board pit-arm-multi_v7_defconfig failure log: ------------------------------------------------- [PYBOOT] [pit 00:34]: u-boot: started kernel. Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 128,734 128,734 board_init_f 173,634 44,900 board_init_r 242,508 68,874 id=64 244,314 1,806 main_loop 1,206,097 961,783 usb_start 5,034,121 3,828,024 id=80 5,034,122 1 eth_start 5,538,662 504,540 bootp_start 10,548,493 5,009,831 bootp_stop 10,548,496 3 id=81 10,548,514 18 id=82 11,725,345 1,176,831 tftp_start 13,989,467 2,264,122 id=84 13,989,468 1 tftp_done 15,850,864 1,861,396 bootm_start 15,850,865 1 id=1 15,855,642 4,777 id=2 15,855,646 4 id=3 15,911,577 55,931 id=4 15,911,578 1 id=6 15,911,578 0 id=5 15,933,423 21,845 id=7 15,945,288 11,865 id=15 15,947,416 2,128 start_kernel Accumulated time: 7,027 SPI read [PYBOOT] [pit 01:09]: Timed out waiting for "<type 'str'>": [PYBOOT] [pit 01:10]: got exception: timeout ~$off [PYBOOT] [pit 01:11]: Done. ======================================================================== Board seaboard-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 2.8 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) Tegra20 (SeaBoard) # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Tegra20 (SeaBoard) # tftp 0x1800000 tmp/seaboard-tYh8p4/tegra20-seaboard.dtb tftp 0x1800000 tmp/seaboard-tYh8p4/tegra20-seaboard.dtb Using asx0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.161 Filename 'tmp/seaboard-tYh8p4/tegra20-seaboard.dtb'. Load address: 0x1800000 Loading: *## 2.6 MiB/s done Bytes transferred = 27380 (6af4 hex) Tegra20 (SeaBoard) # bootz 0x800000 - 0x1800000 ; bootm 0x800000 - 0x1800000 [PYBOOT] [seaboard 00:27]: u-boot: jumping to kernel image bootz 0x800000 - 0x1800000 ; bootm 0x800000 - 0x1800000 Kernel image @ 0x800000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 01800000 Booting using the fdt blob at 0x1800000 Loading Device Tree to 0fff6000, end 0ffffaf3 ... OK Starting kernel ... [PYBOOT] [seaboard 00:27]: u-boot: started kernel. [PYBOOT] [seaboard 01:02]: Timed out waiting for "<type 'str'>": [PYBOOT] [seaboard 01:03]: got exception: timeout ~$off [PYBOOT] [seaboard 01:04]: Done. ======================================================================== Board seattle-arm64-defconfig failure log: ------------------------------------------------- [ 5.085539] ff80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.093362] ffa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.101185] ffc0: 0000000000000000 0000000000000000 0000000000000000 0000000000000005 [ 5.109008] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 5.116830] Call trace: [ 5.119268] Exception stack(0xffff8003ffe7fb90 to 0xffff8003ffe7fcb0) [ 5.125699] fb80: ffff8003ecaeb100 ffff8003ffe6bd10 [ 5.133522] fba0: ffff8003ffe7fd50 ffff000008344a9c 000000000000002d ffff8003ffe91600 [ 5.141346] fbc0: ffff000008bb99f8 ffff000008c9a7c0 0000000000000040 ffff000008bb99f8 [ 5.149169] fbe0: 0000000000000002 ffff8003ec60ac80 ffff8003ffe7fc00 ffff0000089f387a [ 5.156992] fc00: ffff8003ffe7fc10 ffff0000080cdc00 ffff8003ffe7fc20 ffff0000080cdd90 [ 5.164815] fc20: ffff8003ffe7fc90 ffff0000080ce008 ffff000008a2e8c8 0000000000000000 [ 5.172638] fc40: 6d6d75642d676572 0000000000000000 ffff0000084974c8 ffff000008497b28 [ 5.180461] fc60: ffff000008497b90 0000000000000000 000000011cfef718 0000000000000000 [ 5.188284] fc80: 0101010101010101 0101010101010101 0000000000000038 ffff8003ecab8170 [ 5.196107] fca0: ffff8003ecab891c ffffffffffffffff [ 5.200977] [<ffff000008344a9c>] strcmp+0x1c/0x160 [ 5.205762] [<ffff000008496934>] driver_find+0x1c/0x40 [ 5.210892] [<ffff0000084969ac>] driver_register+0x54/0xf8 [ 5.216369] [<ffff000008497b1c>] __platform_driver_register+0x44/0x50 [ 5.222803] [<ffff000008b25618>] fsl_soc_guts_init+0x18/0x20 [ 5.228455] [<ffff000008081a08>] do_one_initcall+0x38/0x128 [ 5.234021] [<ffff000008b00ca4>] kernel_init_freeable+0x144/0x1e8 [ 5.240107] [<ffff0000087bf6f8>] kernel_init+0x10/0x100 [ 5.245324] [<ffff000008084e10>] ret_from_fork+0x10/0x40 [ 5.250627] Code: 540002e1 f2400807 54000141 f8408402 (f8408423) [ 5.256721] ---[ end trace caf7a112252159e0 ]--- [ 5.261335] note: swapper/0[1] exited with preempt_count 1 [ 5.266820] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 5.266820] [ 5.275948] SMP: stopping secondary CPUs [ 5.279865] Kernel Offset: disabled [ 5.283344] Memory Limit: none [ 5.286390] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 5.286390] [PYBOOT] [seattle 02:02]: got exception: panic ~$off [PYBOOT] [seattle 02:03]: Done. ======================================================================== Board snow-arm-multi_lpae_defconfig failure log: ------------------------------------------------- Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,681,275 1,581,275 board_init_f 1,730,994 49,719 board_init_r 1,733,202 2,208 board_init 1,863,858 130,656 board_init_done 1,945,064 81,206 id=64 1,950,496 5,432 main_loop 3,164,539 1,214,043 usb_start 7,671,155 4,506,616 tftp_start 7,671,173 18 id=80 7,671,175 2 eth_start 23,672,152 16,000,977 id=81 23,672,236 84 id=82 23,672,241 5 id=84 23,672,243 2 tftp_done 25,917,669 2,245,426 bootm_start 25,917,678 9 id=1 25,997,521 79,843 id=2 25,997,541 20 id=3 27,261,661 1,264,120 id=4 27,261,662 1 id=5 27,261,674 12 id=6 28,617,092 1,355,418 id=7 28,617,096 4 id=8 28,617,109 13 id=15 29,234,227 617,118 start_kernel Accumulated time: 155,027 lcd Stashed 27 records [PYBOOT] [snow 01:12]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 01:13]: got exception: timeout ~$off [PYBOOT] [snow 01:14]: Done. ======================================================================== Board snow-arm-multi_v7_defconfig failure log: ------------------------------------------------- Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 100,000 100,000 spl_start 1,694,237 1,594,237 board_init_f 1,744,042 49,805 board_init_r 1,746,249 2,207 board_init 1,876,998 130,749 board_init_done 1,959,304 82,306 id=64 1,964,733 5,429 main_loop 3,165,886 1,201,153 usb_start 7,673,397 4,507,511 tftp_start 7,673,414 17 id=80 7,673,416 2 eth_start 28,803,717 21,130,301 id=81 28,803,801 84 id=82 28,803,806 5 id=84 28,803,808 2 tftp_done 31,038,621 2,234,813 bootm_start 31,038,629 8 id=1 31,118,482 79,853 id=2 31,118,501 19 id=3 32,383,203 1,264,702 id=4 32,383,205 2 id=5 32,383,216 11 id=6 33,739,281 1,356,065 id=7 33,739,284 3 id=8 33,739,297 13 id=15 34,356,685 617,388 start_kernel Accumulated time: 153,522 lcd Stashed 27 records [PYBOOT] [snow 01:22]: Timed out waiting for "<type 'str'>": [PYBOOT] [snow 01:23]: got exception: timeout ~$off [PYBOOT] [snow 01:24]: Done. ======================================================================== Board snowball-arm-multi_v7_defconfig failure log: ------------------------------------------------- [ 1.341339] bf40: 00000006 c0ef2df8 c13369a4 c1410000 c1410000 00000006 c1410000 c1410000 [ 1.349487] bf60: c120e9bc c11a6834 c11a683c c1100db4 00000006 00000006 00000000 c11005ac [ 1.357666] bf80: 00000000 00000000 c0b8330c 00000000 00000000 00000000 00000000 00000000 [ 1.365844] bfa0: 00000000 c0b83314 00000000 c0307d78 00000000 00000000 00000000 00000000 [ 1.373992] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.382171] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 fff5fbff dfffbfde [ 1.390350] [<c0596e68>] (strcmp) from [<c0593134>] (kset_find_obj+0x38/0xb0) [ 1.397491] [<c0593134>] (kset_find_obj) from [<c078e768>] (driver_find+0x14/0x30) [ 1.405059] [<c078e768>] (driver_find) from [<c078e7ec>] (driver_register+0x68/0xf4) [ 1.412811] [<c078e7ec>] (driver_register) from [<c0301eac>] (do_one_initcall+0x44/0x16c) [ 1.420989] [<c0301eac>] (do_one_initcall) from [<c1100db4>] (kernel_init_freeable+0x158/0x1e8) [ 1.429687] [<c1100db4>] (kernel_init_freeable) from [<c0b83314>] (kernel_init+0x8/0x114) [ 1.437866] [<c0b83314>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) [ 1.445434] Code: e5e32001 1afffffb e12fff1e e4d03001 (e4d12001) [ 1.451568] ---[ end trace 3ad898d716ee8467 ]--- [ 1.456207] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.456207] [ 1.465332] CPU0: stopping [ 1.468048] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.7.0-rc1-00263-g48e65ed #1 [ 1.476715] Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) [ 1.483703] [<c031038c>] (unwind_backtrace) from [<c030b9ac>] (show_stack+0x10/0x14) [ 1.491424] [<c030b9ac>] (show_stack) from [<c0590ff4>] (dump_stack+0x88/0x9c) [ 1.498657] [<c0590ff4>] (dump_stack) from [<c030eb3c>] (handle_IPI+0x174/0x194) [ 1.506042] [<c030eb3c>] (handle_IPI) from [<c03017e8>] (gic_handle_irq+0x94/0x98) [ 1.513610] [<c03017e8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 1.521087] Exception stack(0xc1301f50 to 0xc1301f98) [ 1.526123] 1f40: 00000001 00000000 00000000 c031b200 [ 1.534301] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e6a8 c1302510 [ 1.542480] 1f80: 2e59f000 c1301fa0 c0308794 c0308798 60000013 ffffffff [ 1.549072] [<c030c514>] (__irq_svc) from [<c0308798>] (arch_cpu_idle+0x38/0x3c) [ 1.556488] [<c0308798>] (arch_cpu_idle) from [<c0379200>] (cpu_startup_entry+0x1bc/0x218) [ 1.564727] [<c0379200>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 1.572906] [<c1100c50>] (start_kernel) from [<0020807c>] (0x20807c) [ 1.579254] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.579254] [PYBOOT] [snowball 00:49]: got exception: panic ~$off [PYBOOT] [snowball 00:50]: Done. ======================================================================== Board wandboard-arm-multi_v7_defconfig failure log: ------------------------------------------------- ################################################################# ################################################################# ################################################################# ################################################################# ######################## 5.4 MiB/s done Bytes transferred = 7017896 (6b15a8 hex) => setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 =>tftp 0x18000000 tmp/wandboard-iT5Rry/imx6q-wandboard.dtb tftp 0x18000000 tmp/wandboard-iT5Rry/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.20.2; our IP address is 172.16.20.162 Filename 'tmp/wandboard-iT5Rry/imx6q-wandboard.dtb'. Load address: 0x18000000 Loading: *### 4.4 MiB/s done Bytes transferred = 32385 (7e81 hex) => bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 [PYBOOT] [wandboard 00:25]: u-boot: jumping to kernel image bootz 0x12000000 - 0x18000000 ; bootm 0x12000000 - 0x18000000 Kernel image @ 0x12000000 [ 0x000000 - 0x6b15a8 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800ae80 Starting kernel ... [PYBOOT] [wandboard 00:25]: u-boot: started kernel. [PYBOOT] [wandboard 01:00]: Timed out waiting for "<type 'str'>": [PYBOOT] [wandboard 01:01]: got exception: timeout ~$off [PYBOOT] [wandboard 01:02]: Done.

8 years, 6 months

← Newer
1
...
32
33
34
35
36
37
38
39
40
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

Kernel-build-reports June 2016